MusicRadar is supported by its audience. When you purchase through links on our site, we may earn an affiliate commission. Here’s why you can trust us.
Imitating a distorted analogue sound is a great way to add character to digital productions. We explore the classic analogue signal chain and how to reproduce it in your DAW
It goes without saying that the ability to record and edit audio in the digital domain brings enormous benefits, enabling us to produce punchy, cutting-edge music entirely within our computers.
However, there’s still something undeniably special about audio processed in the analogue domain. Wouldn’t it be great, then, if you could make your digital recordings sound more analogue?
Thanks to an incThanks to an increasing number of extremely talented plugin developers, this has very much become a viable possibility, as they painstakingly model the gloriously chaotic analogue processes behind magnetic tape, valves, transformers and more. Of course, all of these things have been around in plugin form for ages now, but the current generation focuses particularly on the subtleties and nuances, emulating the effects of tape and desk circuits used at regular operating levels.
In general terms, the analogue recording chain runs from a mic or DI, via a preamp, desk channel and sometimes desk bussing, out to a tape deck. The resultant multitrack recording is then replayed via desk channels and summed to stereo. Within this process, there’s an awful lot going on that simply doesn’t factor into a DAW setup.
Probably the most significant element is the tape machine, where various pre-emphasis and playback EQ circuitry combines with your chosen operating level, biasing and, of course, tape type to greatly influence the outcome.
Beyond this, desk bussing also influences sound, and when you punctuate the signal chain with transformer and amplification circuits, some of which may be valve-based, there are clearly many sources of analogue colouration being brought to bear.
In these walkthroughs we’ll put some of these tools to the test by taking some pristine digital sounds and analogue-ising them. We’ll apply our plugins on an ‘as needed’ basis, using tape, transformer and/or valve processing on individual sounds or groups of tracks where they’re best suited. Don’t forget to check out the accompanying audio examples.
It’s often said that drums and tape make the perfect pairing, but why? And is this still a meaningful suggestion in the digital age?
If you’ve ever recorded drums on a high-quality professional multitrack tape machine, the experience of playing them back and hearing the sound change can be both exciting and unnerving. Tape typically applies a level of mid- to high-frequency smoothness, overall glue and subtle compression to the sound. However, the degree to which this occurs is dependent on many small factors, and it can be pretty baffling knowing how to use it to your advantage.
The factors involved include the level captured to tape, the tape type, tape speed (and the inherent head bump or bass boost associated with it), the choice of EQ curve and, of course, the type of machine used. And to make matters even more complicated, a tape machine has two heads – sync and repro – which sound slightly different to each other. The first can record and play back, with heads physically lined up to enable overdubs to be carried out perfectly in time; the second offers a higher-quality ‘playback-only’ solution for when you get to the mixing stage. Typically, you’ll be listening on the sync head when tracking and making recording decisions.
Broadly speaking, analogue tape affects an audio signal in a beneficial way, but there are some changes that may arise which are less desirable, including crosstalk, print-through, edge tracks, softening of transients and tape hiss. The last of these can become quite significant if you EQ high frequencies heavily after recording. Thankfully, the plugin emulations we’re using in this tutorial focus on the positives, so although you might be able to dial in some tape noise if you want it, you can thankfully switch it out or turn it down if it’s becoming a problem.
In this walkthrough, we’ll put the emulated tape/drum combination to the test. Unlike in the analogue world, we can adjust our drum tracks individually, deciding how much tape effect is applied to each. We can also adjust the tape type and line-up individually. 

If you’re happy with the process of emulating classic tape machines, the thought of emulating analogue mixing desks shouldn’t be at all intimidating. In some respects, though, the whys and wherefores of a desk’s behaviour are hard to quantify. Analysing and emulating the channels and output section individually is one thing, but creating a full-on model of how it all combines, blending those channels depending on signal levels and frequencies, couldn’t be harder. And that’s before you get into the various operating modes and specific signal paths of each individual desk.
Desk plugins tend to offer separate channel and buss versions, the idea being that you insert these on the first insert point of each channel or buss respectively. Although this is not an exhaustive list, some great examples include Slate Digital’s Virtual Console Collection (VCC and part of Virtual Mix Rack), Waves’ NLS Non-Linear Summer or Scheps Omni Channel, Sonimus Satson, the Brainworx bx_console series. Not all of these plugins actually name the mixing desks they model, but most do allude to them, so you can be reasonably certain of what you’re using, and that it will sound great.
Satson is the simplest, offering one desk option (essentially an SSL 4000 Series). VCC – which is two plugins, Virtual Channel and Virtual Mixbuss – now has six desk options, including SSL, Neve, API and Trident models. Brainworx bx_console offers two SSL emulations plus a model of a rare Neve VXS console. Given that this is owned by Dirk Ulrich, the CEO of Brainworx, you’d expect to hear the company’s famous modelling in full effect! Finally, Waves NLS is three desks owned by three particular producers: Mike Hedges’ EMI TG, Yoad Nevo’s Neve 5116, and Mark Stent’s SSL 4000G.
Beyond all this, some plugins offer crosstalk for stereo instances, optional automatic gain control and ganged grouping for easy multichannel adjustment. Some of the extra features with VCC include level calibration, meter ballistics and oversampling settings, while Waves NLS includes more than 100 discretely modelled channels for the collection.
As we’ve already noted, the analogue recording path is pretty complex, with plenty of points at which noise, distortion and non-linearities can be introduced. So, once you’ve got things going with some tape and desk emulations, there are still various other things you can do to add further analogue flavour.
For warmth and a good balance of harmonic distortions (see Harmonic Distortions in the Analogue Recording Chain, below), look for both valve- and transformer-based plugins. For more edgy sounds, seek out solid-state designs, and don’t overlook emulations of classic outboard gear – compressors and EQs, mainly.
As CPU power has increased, so have the ambitions of plugin designers in terms of accurately modelling all aspects of the analogue path. So, if you know that a unit has a valve amp section (the Pultec EQP-1A, say), check to see if the designer has included this in their plugin emulation of it. The other thing to bear in mind is that this process is additive, in the sense that making small changes to many tracks of audio will have a cumulative effect, so don’t go hunting for massively coloured processors when only subtle changes are called for.
As with the tape and desk emulations covered we’ve earlier, this is by no means an exhaustive list, but here are a few suggestions to get you started.
For valve sounds, Wave Arts Tube Saturator is a classic, free Mac plugin. Based on a 12AX7 valve, it models the two triodes in the 12AX7 to emulate two cathode triode amplifiers, much like the preamp stage of a tube hi-fi amp. At the lowest drive level, it’s pretty clean with just a little harmonic distortion.
Next, SPL’s Twin Tube, another classic plugin. Based on their hardware unit of the same name, this one includes separate saturation and harmonics circuits. The first creates harmonic distortion as you push it into distortion, while the latter adds harmonics at one of four specific frequencies (2, 3, 6 and 10kHz). Combining the two helps to fatten sounds and add air.
Although the name implies a level of aggressiveness, SoundToys Decapitator can also be used in subtle ways. It includes five different flavours based on five specific valve and transistor preamps. Of course, if you do want to ramp it up, all five can deliver that too.
While we’re on the subject of ramping it up, iZotope’s Trash is designed for audible distortion, but can be tamed via its waveshaper’s curve editor if you want something more subtle. Mellowmuse SATV, meanwhile, boasts four analogue options – transistor, transformer, tube and tape – each with individual drive, mix blend and grouping.
Another oldy in terms of its longevity (and, yes, looks) but a very good performer is Voxengo’s VariSaturator, which includes both valve and digital saturation, with split processing between high and low bands.
Finally, we have to mention Slate Digital again and their Virtual Buss Compressors. With extensive modelling of analogue non-linear behaviour, there’s a certain ‘black box’ nature to these plugins that you have to experience to fully appreciate.
In fact the company’s Virtual Mix Rack is one of the most elegant ways of combining consoles, outboard, effects, you name it, in one simple solution – see our walkthrough on the previous page for more on this.
When we talk about the benefits gained from an analogue signal path, it’s the harmonic distortions that have the most obvious sonic effect. These are the harmonics that are generated by the circuit and added to the fundamental frequency, of which they’re multiples, numbered sequentially. So the second harmonic is twice the fundamental, the third harmonic three times, and so on.
Viewing these from a pitch perspective, it’s only when you hit the seventh harmonic and beyond that the multiples start to become dissonant against the fundamental. Helpfully, though, the amplitudes of these harmonics tail off anyway.
When it comes to our analogue components, harmonic distortions increase as each component is driven, and it’s their relative levels (odd versus even) that influence the overall sound.
Typically, the even harmonic distortions (second, fourth and so on) sound solid and complementary, fattening up the fundamental, while odd harmonics sound more complex and edgy, enhancing the fundamental. Transistor circuits generate predominantly odd harmonics, while transformers produce both odd and even.
Magnetic tape recorders also produce both odd and even harmonics, although the even ones tend to be less pronounced than those produced by a transformer. Finally, valves typically put out a mixture of odd and even harmonics, although the onset of saturation tends to be gradual – hence the popularity of valves for driven sounds.
Back in the days of analogue, equipment choices were less flexible than today – but as is the case in many areas of the digital world, working in the software domain offers the musician almost too much choice. Keep your head, however, and this is actually a good thing, as there are plenty of sounds – particularly quiet or very dynamic ones – that really don’t benefit from being recorded to analogue tape.
Noise, for example, was a big issue with classical recordings, as the music’s dynamic range really pushed the capabilities of analogue tape. It’s no surprise, then, that that particular sector of the industry shifted to digital recording technologies as soon as it could. You might also have noticed that classic analogue desks, such as those by SSL and Neve, incorporated gate/expanders on every channel, with a view to keeping tape hiss and other system noise at bay.
One of the most appealing benefits of plugin emulations, then, is that they not only put us in control of the sound with far more precision than the original gear, but also that they let us apply it ‘as needed’. This extends to controlling parameters in far more detail than is possible in the real world, including things like noise and hum, as well as tape levels, tape biasing and drive levels in general.
In the walkthrough below we’re going to bring everything together, taking our multitrack of sounds and processing each element using what we feel are the most appropriate techniques. Along the way we’ll A/B the results to hear what difference each change makes. We’ll use our previous examples as a starting point but stay open to adjusting these sounds as needed – in essence, we’ll do whatever works best for the overall picture.
Finally, we’ll look at the master buss. Although mastering is still the final stage of production, any mix engineer worth their salt will tell you that they’re already making pre-mastering decisions at the mix stage, using stereo compression and EQ, and, if available, mixing to half-inch tape. So, our final stage will make use of a mastering tape machine for some added analogue flavour.
Computer Music magazine is the world’s best selling publication dedicated solely to making great music with your Mac or PC computer. Each issue it brings its lucky readers the best in cutting-edge tutorials, need-to-know, expert software reviews and even all the tools you actually need to make great music today, courtesy of our legendary CM Plugin Suite.
Don’t miss the latest deals, news, reviews, features and tutorials
Thank you for signing up to Musicradar. You will receive a verification email shortly.
There was a problem. Please refresh the page and try again.
MusicRadar is part of Future plc, an international media group and leading digital publisher. Visit our corporate site (opens in new tab).
© Future Publishing Limited Quay House, The Ambury, Bath BA1 1UA. All rights reserved. England and Wales company registration number 2008885.























