Blog

Best drum VSTs 2022: our pick of sampled drum kit plugins – MusicRadar

Best drum VSTs 2022: our pick of sampled drum kit plugins  MusicRadar
source

US Justice Department agrees to Trump pick for ‘special master’ – Al Jazeera English

Department’s accommodation could shorten delays in appointing a neutral arbiter to review documents seized at Mar-a-Lago.
The US Department of Justice has said it will accept one of Donald Trump’s suggestions for the neutral arbiter to review documents seized during the FBI’s raid of the former president’s Mar-a-Lago estate last month.
In a court filing late on Monday, lawyers for the department said that, in addition to the two retired judges whom they earlier recommended to fill the “special master” role, they would also be satisfied with one of the Trump team’s selections.
Raymond Dearie, the former chief judge of the federal court in the Eastern District of New York, is currently on senior active status, and the department said he had indicated he was available and “could perform the work expeditiously” if appointed.
The Trump team said earlier on Monday that it opposed both Justice Department selections.
Last week, US District Judge Aileen Cannon agreed with a request from Trump’s team to freeze the government’s review of the files until a special master is appointed to check the documents for any potential executive privilege or attorney-client privilege.
It is now up to Cannon to choose whether to name 78-year-old Dearie to the case.
The Justice Department’s accommodation could help accelerate the selection process and shorten any delays caused by the appointment of the special master.
The department is conducting an investigation into Trump’s possible mishandling of classified material in an unprecedented criminal probe targeting a former president.
The search warrant for Mar-a-Lago, Trump’s Florida home, said federal agents were investigating potential violations of three different federal laws, including one that governs gathering, transmitting or losing defence information under the Espionage Act.
An unsealed property receipt also showed the FBI seized 11 sets of classified documents, some of which were marked not only top secret but also “sensitive compartmented information”.
That term refers to a special category meant to protect the nation’s most important secrets that, if revealed publicly, could cause “exceptionally grave” damage to US interests.
Trump’s team has rejected the probe as “misguided”, and earlier this week argued in a court filing that US law grants presidents “extraordinary discretion” to label documents from their administration as presidential or personal.
His lawyers described the investigation as a “document storage dispute that has spiraled out of control” and accused the government of seeking to make it a crime for the former president to hold on to “his own Presidential and personal records”.
They also rejected the argument that US national security may have been harmed by Trump’s possession of the records, saying there is no indication that potentially secret files were exposed to anyone.
Trump’s legal team had urged Cannon to keep in place the directive that temporarily halted key aspects of the Justice Department’s criminal probe.
The Justice Department late last week appealed the judge’s order, asking Cannon – a Trump appointee – to partially suspend her own ruling and allow the review of classified documents to proceed pending appeal.
Department lawyers have rejected the idea that the documents belonged to Trump or that Mar-a-Lago was a permissible place to store them.
Meanwhile, a congressional committee said in a letter on Tuesday that the National Archives is still not certain that it has custody of all Trump’s presidential records even after the FBI search.
The House Committee on Oversight and Reform revealed that staff at the Archives on an August 24 call could not provide assurances that they have all of Trump’s presidential records. The committee in the letter asked the Archives to conduct an assessment of whether any Trump records remain unaccounted for and potentially in his possession.
“In light of revelations that Mr. Trump’s representatives misled investigators about his continued possession of government property and that material found at his club included dozens of ‘empty folders’ for classified material, I am deeply concerned that sensitive presidential records may remain out of the control and custody of the US Government,” Representative Carolyn Maloney, the chairwoman of the Oversight Committee, wrote in the letter.
The House committee has jurisdiction over the Presidential Records Act, a 1978 law that requires the preservation of White House documents as property of the US government.
Follow Al Jazeera English:

source

FLO – Not My Job Lyrics – Genius

Produced by
Release Date
How to Format Lyrics:
To learn more, check out our transcription guide or visit our transcribers forum
“Not My Job” by FLO is the British girl-group’s first single after their debut EP, “The Lead.” A snippet of the song was sung by the girls on September 7, where they slated a release date of September 14, later pushed back to September 21 and a presave link became available the same day.

source

Single tickets to Wheeler Opera House now on sale for 2022-23 season – The Aspen Times

News News |
After announcing the 2022-23 season lineup last month, the Wheeler Opera House now is offering single-ticket sales to all of the performances as part of the Wheeler Presents season.
From familiar faces like rock legend John Oates and Saturday Night Live alum Kevin Nealon to Los Chicos del 512’s ultimate Selena Experience and an evening of the most well-known operatic arias directed by Damien Sneed, the Wheeler brings a range of entertainment.
Single tickets are on sale now at the Wheeler Opera House Box Office (970.920.5770/ aspenshowtix.com) at 320 E. Hyman Ave., Aspen.
New this year, the Wheeler is offering season subscriptions, which are still available. A Wheeler Season Subscription 3+ saves 10% off Premium and Standard ticket prices when you select three or four performances. A Season Subscription 5+ saves 15% off Premium and Standard ticket prices when you select five or more performances.
Los Chicos del 512: The Selena Experience
Sunday, Nov. 13, 5 p.m.
The members of Los Chicos del 512 have lived and played to the music of the queen of Tejano music, Selena Quintanilla, going back to 1995.
Mission Mt. Mangart
Wednesday, Dec. 14, 7:30 p.m.
Written, directed, edited and produced by professional skier/documentary filmmaker/Colorado Snowsports Hall of Fame inductee Chris Anthony, with an original film score by composer Carlo Nicolau, this documentary delves into untold tales of the 10th Mountain Division.
Mission Mt. Mangart tells the story as a flashback from the present day, while jumping back in time to follow the 10th from 1939 to June 3, 1945, with in-depth narration, as well as interviews of original 10th Mountain Division soldiers. 
Becky Robinson: Heavy Pour Tour
Saturday, Dec. 17, 7:30 p.m.
Originally from Portland, Oregon, Becky Robinson is an LGBTQ+ LA-based comedian, writer, actor and voice-over star. You may also know her for the “Entitled Housewife,” the outspoken viral golf character she created. In addition to touring internationally as a stand-up comedian, she was named a JFL Montreal New Face of Comedy where her stand out multi-character performance landed her a sketch show development deal and a number of voiceover jobs with DreamWorks, Nickelodeon and Netflix. 
Belly Up Aspen and Wheeler Opera House present An Evening with Kevin Nealon
Thursday, Dec. 29, 7:30 p.m.
Best known for his nine-year stint as a cast member of NBC’s Saturday Night Live and his critically acclaimed work in Weeds, comedian Kevin Nealon is bringing his stand-up comedy routine to the Wheeler. In his new book, “I EXAGGERATE, My Brushes With Fame,” he shares original full-color caricatures and personal essays about his famous friends.
Justin Willman 
Saturday, Dec. 31, 6 p.m.
Magician and comedian Justin Willman is best known as the star and creator of the hit Netflix series Magic For Humans, but you may recognize him from one of his many television appearances on The Tonight Show, The Today Show, Ellen, Conan … Or maybe you’ve seen him on Baking Impossible, Cupcake Wars, Halloween Wars, Win, Lose or Draw … or maybe he’s the child magician you hired in suburban St. Louis in the ’90s.
The Boy Band Project
Friday, Jan. 20, 2023, 6:30 and 9:30 p.m.
Direct from Broadway, The Boy Band Project is a cover group that re-imagines the sound, movement and energy of popular boy bands such as NSYNC, Backstreet Boys, Hanson, One Direction, 98 Degrees, O-town, BoyzIIMen, Jonas Brothers.
Classic Albums Live performs: Beatles: Let It Be
Saturday, Jan. 21, 2023, 7:30 p.m.
Founded in 2003 by Craig Martin, Classic Albums Live takes the greatest albums and recreates them live on stage note for note, cut for cut. This group plays 100-plus shows a year across North America, and now Classic Albums Live is bringing the music of The Beatles to the Wheeler. Let It Be is the 12th and final studio album by the Beatles, released on May 8, 1970, almost a month after the group’s breakup.
Our Song, Our Story: The New Generation of Black Voices with Musical
Direction by Damien Sneed

Wednesday, Jan. 25, 2023, 7:30 pm.
An evening of music highlighting some of the world’s best-known operatic arias, art songs and spirituals. Created and directed by composer, conductor and multi-genre musician Damien Sneed, Our Song, Our Story brings together Justin Austin and Janinah Burnett, accompanied by a string quartet and Damien Sneed on piano.

The Peking Acrobats featuring The Shanghai Circus

Tuesday, Feb. 7, 2023, 7:30 p.m.
As a treat for fans of The Peking Acrobats, this all-new production now features performers from The Shanghai Circus in a Chinese acrobatic extravaganza. 
International Guitar Night
Sunday, Feb. 12, 2023, 7:30 p.m.
Whether you’re a fan of jazz, Latin music or contemporary classical guitar, International Guitar Night, in its 23rd year of touring, has something for everyone.
Jocelyn Gould, Canadian jazz guitarist and vocalist, and recipient of the 2021 Juno (Canadian Grammy) for Jazz Album of The Year. She is passionate about the tradition of jazz guitar, she cites Grant Green, Kenny Burrell, Wes Montgomery and Joe Pass as primary influences of the instrument. Jesus Guerrero, Flamenco master from Spain, started playing guitar at 11 under master teacher José Luis Balao. He is one of the most sought-after figures of the current flamenco scene. Stephanie Jones, currently based in Germany, is an active soloist and chamber musician. Olli Soikkeli, from Finland, started playing guitar at 12. After a few years of playing, Olli was introduced to the music of the Django Reinhardt and Gypsy Jazz has been Olli’s main focus ever since. 
Aspen Laugh Festival
Tuesday, Feb. 21, to Saturday, Feb. 25, 2023
After a two-year hiatus due to, well, life not being a barrel of laughs, the festival will be back at the Wheeler, with five days of comics on the main stage. You can buy an Aspen Laugh Festival Knock Knock Pass at a deep discount. Supplies will be limited. These passes will be available to Wheeler Season Subscribers Sept. 13,and on sale Oct. 11 while supplies last.
An Evening of Songs and Stories with John Oates featuring Guthrie Trapp
Friday, March 10, 2023, 7:30 p.m.
John Oates is one-half of the best-selling duo of all time, Hall & Oates, as well as a solo artist. Soaking up the sounds of the ’60s, he has recorded seven solo albums, a memoir and a DVD docu-concert called Another Good Road. He curated and produced the 7908 Aspen Songwriters Festival, which was held at the Wheeler from 2010 to 2012 and featured performers such as Allen Toussaint, Keb Mo, Kenny Loggins, Sam Bush, Shawn Colvin, Matt Nathanson and Bob Schneider.
Guthrie Trapp, from Nashville, explores country, blues, Latin, reggae, jazz, rock and experimental music through his guitar. He has supported best-selling artists such as Garth Brooks, Dolly Parton, Tim O’Brien, Delbert McClinton, Randy Travis, George Jones, Alison Krauss, Sam Bus and Rosanne Cash.
DanceAspen: Winter Edition
Friday, March 17 and Saturday, March 18, 2023, 7:30 p.m.
DanceAspen has quickly been established as a fresh voice and champion for new choreography in the dance world. This performance will feature a new creation set on the DanceAspen artists by choreographer Yin Yue.
Wheeler Opera House presents Bone Hill – The Concert
Friday, April 21, 2023, 7:30 p.m.
Bone Hill is a new musical work for theater created and developed by librettist/composers Martha Redbone and Aaron Whitby at Joe’s Pub and the Public Theater. In its current Song Cycle iteration, Redbone becomes the characters from four generations of a family in the hills of coal-mining Appalachia, and the musicians are the townsfolk.

After announcing the 2022-23 lineup last month, the Wheeler now is offering single-ticket sales to all of the performances as part of the Wheeler Presents season.





Join the City of Aspen team! Mountain views and career opportunities with great benefits are right within your reach. Apply…

Pitkin County Dry Goods ASPEN’S MEN’S AND WOMEN’S CLOTHING STORE, SINCE 1969 – $5,000 SIGN ON BONUS. – FULLY PAID…

Aspen Meadows NOW HIRING With the finest professionals, we deliver gracious hospitality. As committed stewards of our community, we create…

Long-time, local owners of 50-acre private horse ranch in Missouri Heights seeking to hire exceptional and experienced individuals for the…

The Aspen Times is looking for detail oriented, early risers to deliver newspapers in the Roaring Fork Valley. Earn money…

Full-time position develops, promotes, & implements Holy Cross Energy’s (HCE) Smart Electric & Building Design (SEBD) programs to members, contractors,…

Overland Sheepskin Co. is a luxury outerwear and home decor retailer looking for professional and enthusiastic sales associates to join…

The Ritz-Carlton, Aspen Highlands, 75 Prospector Road, Aspen, CO 81611 We are seeking ladies and gentlemen to join our unrivaled…

highly experienced office manager/bookkeeper needed now. 20-40/weekat Basalt location. fun, interesting, inspiring environment with “lots of moving parts”. Quickbooks proficient,…

CONTEMPORARY AND LUXURY MEN’S & AND WOMEN’S FASHION – 100% Paid Health Insurance – Complimentary Premier Ski Pass – Generous…

How are you leaning in your vote for sheriff?

View Results

Loading ... Loading …



How are you leaning in your vote for sheriff?

View Results
Jobs
Classifieds
Autos
Real Estate
Rentals
Service Directory
Pets
Merchandise
Legals
Place Legal Ad
Search Legal Ads
Farm & Ranch
Recreation
Announcements
Contact Us
Become a Carrier
Submissions
Submit an Obituary
Advertise
Archives
Newsletters
Buy Photos
Commercial Print Sales
RSS
Aspen E-edition
Snowmass E-edition
Cookie List
Do not sell my personal information
Breckenridge – Summit County
Craig – Moffat County
Glenwood Springs – Rifle
Park City – Utah
Steamboat Springs – Routt County
Vail – Eagle Valley
Winter Park – Granby – Grand County
Aspen High School – Skier Scribbler
Printing Press Jobs
©2005 – 2022 Swift Communications, Inc.

source

Progressive Alabama School District Teaches Students That Every Race The Master Race In Own Way – The Onion

EUTAW, AL—Drawing from a curriculum that states all cultures have their own Übermensches, a progressive Alabama school district teaches students that every race is the master race in its own way, sources confirmed Monday. “When you think about it, every race, no matter where it comes from, is genetically superiority to all others in its own unique way,” said teacher Tessa Hughes, explaining that every ethnic group had the ability to enslave the rest of the world if its members truly believed in themselves. “There isn’t just one way to think about a master race. Every ethnicity brings its own supremacy to the table. No race is more capable of genocide than any other, and that’s what makes us all special.” According to reports, the curriculum of the progressive Alabama school district continues to emphasize that women are inferior to men.

source

Tools For More Mindful Music Production – Magnetic Magazine

The modern world, with all its distractions and technology, is anathema to what a producer really needs in the studio. With constant distractions, endless options, and more information in a day than we should have in a lifetime, it's a wonder any music is produced at all in this day and age! 
This is why mindfulness practices are essential to music producers as a way to help redirect the brain away from distractions and hone in on the meaningful work that needs to be done in your DAW.
And while you don't need to be a master of transatlantic meditation to start seeing the benefits of mindfulness in your music production, these three tools will help you get out of your head, avoid distractions, and have a clear mind when making music.
Having a mindfulness routine is essential for music producers. 
Mindfulness practice helps us stay focused in the studio over longer sessions, access a flow state more quickly, and be able to tap into the emotions we seek to convey in the music we are creating. 
But getting into a mindfulness practice can be intimidating. Worst yet, not seeing results after a few sessions can make it all feel quite discouraging. 
But Sensate allows you to tap into the benefits of mindfulness and start receiving its benefits almost instantaneously. It accomplished this by specific vibrations that ease the Vargus nerve, which in turn makes you feel safe and comforted. 
Even after one session, you feel centered and grounded; both emotions which are essential to creating music that's authentic to you. This is what makes this powerful little palm-sized tool an essential component of mindfulness-based music production. 
Check Out More Here
One of the biggest dangers and most tantalizing temptations when producing is to tab out of your DAW and fiddle with something else. This could be your production checklist for the day, it could be email or a litany of other temptations. 
But reMarkable 2 solves all of this. 
This tablet is designed to be an electronic version of your classic pen-and-paper notepad which helps get out of your computer and back into the real world around.
reMarkable helps quell the temptation to constantly be diverting attention away from what matters. I've had this thing in my studio, within arm's reach, now for a month after our initial product review and it's become an essential part of the framework behind my workflow. 
You can sync it up with your cloud or other notes, which means you never skip a beat and keep your productions moving forward with intention and purpose.
Learn More About reMarkable Here
Music production can be a long and lonely game, filled with tireless nights in the studio.
And that lighting can be tiresome on your eyes, causing migraines and added stress that bubbles up just beneath the surface of your psyche. It's this exact stress that can prevent you from writing your best work, which makes these light-blocking glasses a handy tool to have if you find yourself producing most often at night.
And because they are proven to block melatonin-disrupting blue light, it makes falling asleep after a long night-time studio session that much easier. I don't know about you, but sometimes I finish producing after midnight and struggle to fall asleep immediately cause of all the screentime – which then eats up my valuable time the next day. 
These compounding effects can have a serious impact on your progress and these glasses help avoid it all and get quality time in the studio and out. 
Learn More About This Here
Managing Editor at Magnetic Magazine – Former Marketing Manager at the Hyperbits Masterclass – Writer, Content Strategist, Music Producer, and Record Label Manager 

source

Expediting IND applications with drug master files – BioPharma Dive

Completing an investigational new drug (IND) application can be a long and tedious process, one known to bog down timelines and frustrate sponsors looking to take their cell or gene therapy (CGT) to the clinic. In a tight race to trials, program sponsors look for efficiencies from bench to bedside.
Using off-the-shelf materials such as plasmid DNA products and CRISPR-associated nucleases is one way to potentially speed things up — particularly if they come with a drug master file, or DMF.
Drug master files are reference packages that report to the FDA information about the processes involved in new drug products. They’re not FDA-required — nor approved nor denied — but they can help supplement INDs and other applications as a way to cross-reference new processes with pre-filed submissions.
And as a concept, DMFs aren’t new. Download the DMF list and you’ll see tens of thousands of submissions, some dating to 1939. They’ve always been used to support various materials, even ibuprofen and acetaminophen. But as normalized as they’ve become, DMFs are still novel among CGTs, which only recently began using off-the-shelf materials that would benefit from a DMF.
With the growing standardization of cell and gene therapies, interest has emerged in DMFs as a tool to expedite the path to clinical trials. If you use an off-the-shelf reagent that has a DMF, the application links to that preexisting file without the filer having to provide redundant information.
As more off-the-shelf materials such as plasmids become available for cell and gene therapies, suppliers are submitting DMFs for those products as a benefit to customers. Doing so gives researchers a dual offering: They can not only access standardized materials at GMP-grade — with the cost and time savings that come with that — but they can also cross-reference their INDs to the already prepared DMF.
Two examples of these DMF-ready products are Aldevron’s SpyFi™ Cas9 nuclease and pALD-X80 helper plasmid, each available from research grade to GMP. When new cell and gene therapy products use these materials, users automatically get the benefit of a pre-filed DMF that references Aldevron’s manufacturing processes involved in making them.
The reason IND submissions have long embraced DMFs is the same reason DMFs are likely to rapidly expand among CGT applications in the months and years ahead: They’re not just efficient in saving time, but they’re also potentially more comprehensive with less of a risk of missed information.
If you use the SpyFi™ Cas9 nuclease, for example, or others offered from Aldevron, you can skip the drug substance part for the Cas9 product when filing the IND because Aldevron has already prepared the DMF.
And when linking to the DMF, the FDA gets complete access to manufacturing information without the filer having to do so. This avoids overlooking information the FDA might need, which can delay application review.
Moreover, translational medicine organizations may find particular value in DMF-ready products because they overcome resource barriers inherent to hospitals and academic institutions. Unlike big pharma or biotech companies, many such organizations may not have easy access to field experts. Turning to DMFs gives academic outfits the economies of scale they might not get otherwise.
By 2025 — that’s just two years away — the FDA expects to approve up to 20 cell and gene therapy products per year. With all that IND activity in a crowded market, sponsors will need any differentiating efficiency they can get along the pathway to clinical trials and beyond.
By taking advantage of pre-filed DMFs, researchers benefit from the value, time savings and reduced complexities of having someone else do the heavy lifting for key components of the final drug product. After all, this concept isn’t new in drug development. However, the science in this so-called “new frontier of medicine” is. As it becomes more standardized, everyone wins — including future patients.
Looking for other ways to standardize processes and accelerate your path to market? Stay tuned for Aldevron’s next post, where we’ll explore how plasmid backbones can simplify development logistics and reach your goals faster.
Get the free daily newsletter read by industry experts
Topics covered: Pharma, biotech, FDA, gene therapy, clinical trials, drug pricing and much more.
Seven years after the first copycat biologic drug arrived in the U.S., expected cost savings have been modest at best. The next few years will show whether the knockoff drugs can live up to their cut-price promise.
Congress passed major drug pricing legislation in 2022, putting pharmaceutical companies on the defensive and creating a new precedent for the industry.
Keep up with the story. Subscribe to the BioPharma Dive free daily newsletter
Topics covered: Pharma, biotech, FDA, gene therapy, clinical trials, drug pricing and much more.
Keep up with the story. Subscribe to the BioPharma Dive free daily newsletter
Topics covered: Pharma, biotech, FDA, gene therapy, clinical trials, drug pricing and much more.
Subscribe to BioPharma Dive for top news, trends & analysis
Topics covered: Pharma, biotech, FDA, gene therapy, clinical trials, drug pricing and much more.
Get the free daily newsletter read by industry experts
Topics covered: Pharma, biotech, FDA, gene therapy, clinical trials, drug pricing and much more.
Seven years after the first copycat biologic drug arrived in the U.S., expected cost savings have been modest at best. The next few years will show whether the knockoff drugs can live up to their cut-price promise.
Congress passed major drug pricing legislation in 2022, putting pharmaceutical companies on the defensive and creating a new precedent for the industry.
The free newsletter covering the top industry headlines
Topics covered: Pharma, biotech, FDA, gene therapy, clinical trials, drug pricing and much more.

source

Future Music is 30: vote for the greatest instruments and artists since 1992 – MusicRadar

MusicRadar is supported by its audience. When you purchase through links on our site, we may earn an affiliate commission. Here’s why you can trust us.
To celebrate FM’s anniversary, we want you to help us crown the best synths, drum machines, bands and producers of the last 30 years
Future Music magazine turns 30 this month. Issue 1 hit newsstands in October 1992 and we’ve been charting the course of music technology – and the cutting edge musicians that use it – ever since.
FM’s anniversary special hits shelves on Tuesday 18 October. In it, we look back at the changing face of music making via our list of the 30 essential instruments and production tools of FM’s lifetime.
It’s not all about our opinions though. We want YOU to help us crown our readers’ choice for the greatest hardware instrument and the greatest electronic musician of FM’s lifetime.
Results will be revealed in out Gear Of The Year issue, our 13 December.
What’s the best hardware synth, sampler or drum machine of Future Music’s lifetime? Select from our nominations or write in your own. Instruments must have been released between 1992 and 2022.
What musician or group has pushed the limits of music production more than any of their peers over the past 30 years? Select from one of our nominees or write in your own. Artists must have been active – recording and releasing at least one new album or track – between 1992 and 2022.
Future Music is the number one magazine for today’s producers. Packed with technique and technology we’ll help you make great new music. All-access artist interviews, in-depth gear reviews, essential production tutorials and much more. Every marvellous monthly edition features reliable reviews of the latest and greatest hardware and software technology and techniques, unparalleled advice, in-depth interviews, sensational free samples and so much more to improve the experience and outcome of your music-making.
Don’t miss the latest deals, news, reviews, features and tutorials
Thank you for signing up to Musicradar. You will receive a verification email shortly.
There was a problem. Please refresh the page and try again.
MusicRadar is part of Future plc, an international media group and leading digital publisher. Visit our corporate site (opens in new tab).
© Future Publishing Limited Quay House, The Ambury, Bath BA1 1UA. All rights reserved. England and Wales company registration number 2008885.

source

L.A. City Council president faces calls to resign after she made racist comments – NPR


On a recording, the L.A. City Council president made racist comments. There have been calls for her resignation and the episode has exposed the racial tensions that have affected politics in the city.
MARY LOUISE KELLY, HOST:
In Los Angeles, a racism scandal is engulfing city hall and exposing decades-old racial tensions within city government. The president of the LA City Council was caught on a secret recording making racist comments about a colleague’s Black son, along with other cruel remarks. She is now facing calls to resign her seat on the council. NPR’s Adrian Florido is in Los Angeles tracking this. Hey, Adrian.
ADRIAN FLORIDO, BYLINE: Hi, Mary Louise.
KELLY: Hey. Tell me a little more about what is on this audio recording.
FLORIDO: Well, the recording captures a conversation from last year between Nury Martinez, the powerful president of the Los Angeles City Council, and two of her council colleagues, Kevin de Leon and Gil Cedillo, along with an important LA union leader. All four of them are Latino. And that’s important to note, Mary Louise, because in the audio, they’re strategizing on how to maximize Latino political power in the city as part of the redistricting process that was underway last fall and also on how to take influence away from Black political leaders. It’s a long conversation, and throughout it, Martinez uses racist and cruel language to talk about council colleagues and residents of her own city.
KELLY: Without wishing to amplify cruel or racist comments, I’m just trying to get a sense of the severity of this. Can you share any specifics?
FLORIDO: Yeah, and they are quite disturbing comments that she makes. One of the remarks that has most shocked the city since the recording came to light yesterday is one in which Martinez talks about one of her white colleagues on the city council and his adopted Black son. She accuses her colleague of using his son as an accessory. And she says this…
(SOUNDBITE OF ARCHIVED RECORDING)
NURY MARTINEZ: And then there’s this white guy with this little Black kid who’s misbehaved. There’s nothing you can do to control him, parece changuito.
FLORIDO: She calls him a changuito, which is Spanish for little monkey. The recording is peppered with these kinds of tropes and crass remarks. At one point, Martinez describes Indigenous immigrants from Mexico using denigrating language. She also uses an expletive to deride LA’s progressive top prosecutor because he is, in her words, with the Blacks.
KELLY: Do we know, Adrian, where this recording came from, who made it, how it got out?
FLORIDO: It’s not clear who made it or who leaked it. It was posted to Reddit earlier this month but first reported on yesterday by the Los Angeles Times. And since then, the calls for the council president to resign have been swift. Martinez has apologized and earlier today agreed to give up the council presidency but not her seat on the council. But council colleagues and civic leaders are pressuring her to do that. So are protesters, who yesterday gathered outside her house.
(SOUNDBITE OF ARCHIVED RECORDING)
UNIDENTIFIED PERSON: (Chanting) Resign. Resign. Your racist comments are out of line. Resign. Resign.
FLORIDO: There are also calls for the two councilmen that Martinez was recorded having that conversation with to resign because they also make racially insensitive remarks on the recording.
KELLY: I mentioned this is exposing some longstanding tensions over race within the LA city government. Just give us a little context.
FLORIDO: Well, there’s been decades of tension between LA’s Black and Latino communities. The Black population is shrinking here and is now under 9%, while Latinos now account for nearly 50% of the city’s population. Latino power has been growing at city hall. And there’s been this fear among some Black Angelinos that as Latinos become a more dominant force in city politics, Black residents’ concerns are going to be ignored. For some Black residents, this recording is confirming those fears. I’ve spoken with people today who’ve long worked to promote racial solidarity in LA who say that they are devastated by this recording and all the damage it could do to their work.
KELLY: NPR’s Adrian Florido, thank you.
FLORIDO: Thank you.
Copyright © 2022 NPR. All rights reserved. Visit our website terms of use and permissions pages at www.npr.org for further information.
NPR transcripts are created on a rush deadline by an NPR contractor. This text may not be in its final form and may be updated or revised in the future. Accuracy and availability may vary. The authoritative record of NPR’s programming is the audio record.
Sponsor Message
Become an NPR sponsor

source

Donald and Ivanka Trump woo Christian right in newly released tape – The Independent

New documentary ‘Battleground’ on abortion rights includes audio from 2016 closed-door meeting
Find your bookmarks in your Independent Premium section, under my profile
Donald Trump and his daughter Ivanka Trump are heard wooing Christian right leaders ahead of the 2016 election in a newly unearthed audio recording.
The tape is featured in the new documentary Battleground, directed by Cynthia Lowen, which takes a close look at anti-abortion activists. According to the documentary, the audio was taken during a closed-door meeting between Trump and leaders of the Christian right, 40 days before the 2016 election.
Trump was reported to have met with conservative Christians in June of that year. The audio in the documentary was recorded during a different meeting, on 29 September 2016.
The aim was to discuss how Trump would “fulfill the Christian right’s legislative and cultural priorities,” per Battleground.
Unidentified participants are first heard chatting as they await Trump’s arrival. He then enters the meeting, greets its attendees, and comments: “This is serious power.”
Steve Bannon, then the chief executive officer of Trump’s campaign, tells the participants: “The key that picks the lock to this election is you. Conservatice Catholics and evangelicals who have not voted, who have not been motivated to vote, have to come to the polls. If we don’t win on 8 November, it’s because evangelical and Catholic leaders have not delivered. Your fate is in your own hands.”
Later in the documentary, Robert Jeffress, the Southern Baptist pastor of a megachurch in Dallas, Texas, and a televangelist and Fox News contributor, is heard saying: “There is only one candidate running in this election who is pro-life, pro-religious liberty, pro-conservative justices to the Supreme Court. And there’s only one candidate who treats the views of conservative Christians with respect. And that candidate is Donald Trump.”
Jeffress confirmed the accuracy of the quote and the timing of the meeting in an email to The Independent.
Trump then brings up the Supreme Court and the prospect of appointing multiple justices, stating: “And this president could choose – I mean, it could be five. Probably going to be three. It could very well be four, but it could even be five justices. So you get Hillary Clinton in there, it’s over.”
After acceding to the White House, Trump ended up nominating three Supreme Court justices: Neil Gorsuch, Brett Kavanaugh, and Amy Coney Barrett.
On the audio tape, Trump is then heard announcing: “Here’s my daughter.” Ivanka Trump greets the participants, telling them: “Hello, good morning, everyone! This is a very full, impressive room.”
Her father acquiesces, stating: “These are the most powerful people in the country.” He then tells his daughter: “Go back to work now.”
After Ivanka Trump seemingly leaves the conversation, Eric Metaxas, a conservative Christian radio host and author, tells Trump: “As much as I love your daughter, she got you in trouble on the Planned Parenthood issue, however.”
In response, Trump says “the feeling is that a lot of women are very happy with Planned Parenthood, but because of the fact they perform abortions, I can’t support it. I would defund it.”
Metaxas tells him: “Okay, but unless you hit that very hard, there are many Christians that just don’t believe you.”
During her father’s 2016 campaign, Ivanka Trump obfuscated when asked to share her views on abortion rights. When she was asked whether she supports abortion rights during an interview with Boston Public Radio in February 2016, she said: “I don’t talk about my politics. I don’t feel like it’s my role, and not the candidate’s. I’m the daughter… I don’t think my politics are relevant to the discussion.”
In October 2020, she strengthened her stance, describing herself to Real Clear Politics as “unapologetically” against abortion rights.
The Independent has contacted representatives for Donald Trump and Eric Metaxas for comment.
Battleground is available in select theatres and will be released online beginning 14 October.
Registration is a free and easy way to support our truly independent journalism
By registering, you will also enjoy limited access to Premium articles, exclusive newsletters, commenting, and virtual events with our leading journalists
{{#verifyErrors}} {{message}} {{/verifyErrors}} {{^verifyErrors}} {{message}} {{/verifyErrors}}

By clicking ‘Create my account’ you confirm that your data has been entered correctly and you have read and agree to our Terms of use, Cookie policy and Privacy notice.
This site is protected by reCAPTCHA and the Google Privacy policy and Terms of service apply.
Already have an account? sign in
By clicking ‘Register’ you confirm that your data has been entered correctly and you have read and agree to our Terms of use, Cookie policy and Privacy notice.
This site is protected by reCAPTCHA and the Google Privacy policy and Terms of service apply.
Registration is a free and easy way to support our truly independent journalism
By registering, you will also enjoy limited access to Premium articles, exclusive newsletters, commenting, and virtual events with our leading journalists
{{#verifyErrors}} {{message}} {{/verifyErrors}} {{^verifyErrors}} {{message}} {{/verifyErrors}}

By clicking ‘Create my account’ you confirm that your data has been entered correctly and you have read and agree to our Terms of use, Cookie policy and Privacy notice.
This site is protected by reCAPTCHA and the Google Privacy policy and Terms of service apply.
Already have an account? sign in
By clicking ‘Register’ you confirm that your data has been entered correctly and you have read and agree to our Terms of use, Cookie policy and Privacy notice.
This site is protected by reCAPTCHA and the Google Privacy policy and Terms of service apply.
Donald Trump and daughter Ivanka Trump walk to Marine One on the South Lawn of the White House on 4 January 2020 in Washington, DC
Drew Angerer/Getty Images
Want to bookmark your favourite articles and stories to read or reference later? Start your Independent Premium subscription today.
Please refresh the page or navigate to another page on the site to be automatically logged inPlease refresh your browser to be logged in
Log in
New to The Independent?
Or if you would prefer:
Want an ad-free experience?

source

Georgia lawmakers could consider increasing state's tax incentives for music production – The Center Square

Musical instruments sit in a recording studio. 

Musical instruments sit in a recording studio. 
(The Center Square) — State lawmakers could soon consider increasing the state’s tax incentives for music or creating a state-run music office to help performers, managers, songwriters and producers.
Those were among the suggestions witnesses offered to lawmakers during a Joint Study Committee on Georgia Music Heritage meeting.
The state office’s staff would advocate in Georgia and at the federal level on behalf of issues that affect songwriters and performers, such as royalties, David Lowery, an Athens-based musician, told the committee. The office could potentially partner with state offices in other states to study relevant issues.
“Most musicians are hard-working entrepreneur types and not really looking for a handout,” Lowery, a University of Georgia Music Business School professor, told lawmakers. “What they’re really looking for is to be treated fairly under the rules and regulations and how business is supposed to work in the United States.”
Lowery pointed to music offices in Texas and the city of Austin, Texas.
“The Texas music office, as well as the city of Austin music office, have weighed in quite helpfully on behalf of songwriters and performers when we’re getting the short end of the stick with royalties,” Lowery said.
In 2017, Georgia lawmakers passed House Bill 155, the Music Investment Act, a measure intended to revitalize the state’s music industry. Former Gov. Nathan Deal, a Republican, signed the measure into law.
Under the bill, the spending threshold for a “tour origination” — a musical or theatrical performance that originates and has its first performance in Georgia — is $500,000, while the threshold for movie scoring is $250,000 and $100,000 for other recordings. The credits are set to expire on Jan. 1.
Brian Hudson, a musician and Georgia Music Partners advisory board member, urged lawmakers to consider changes to its tax incentives for the music business, including lowering the thresholds and making the credits transferable.
Hudson suggested lawmakers consider lowering the spending threshold for a “tour origination” to $100,000 and lowering the other spending thresholds to $50,000.
“It’s not working because the thresholds are too high,” Hudson told lawmakers. “…The cost of recording has come down dramatically and so the thresholds under the current law are just way too high, and the fact that the credits are not transferable, which they are in post-production film and video games, that’s the other reason it’s not working.”
This year, lawmakers considered House Bill 1330, the Georgia Music and Theatre Jobs Recovery Act. The measure would have increased tax credits for musical or theatrical performances and lowered the spending thresholds to qualify for a credit.
Proponents say amended music tax credits could do for the state what film incentives did.
Georgia’s tax incentives for the film industry are a potentially controversial topic. Politicians love to tout the incentives as a job creator, but in a recent interview with The Center Square, one leading economist questioned the efficacy of the incentives.

source

DPA 4055 Kick Drum Mic – A Real-World Review – Mix

Update your browser to view this website correctly. Update my browser now
×
Home › Reviews›Microphones
Mix discovers the DPA 4055 is a versatile small-diaphragm condenser that can handle the SPLs.
By Barry Rudolph ⋅

The DPA 4055 Kick Drum Mic is a pre-polarized condenser model and the latest addition to DPA’s instrument microphone line. Unlike other kick drum mics, the 4055 has no preset frequency response, curve or shape that the manufacturer thinks best for recording kick drums. It has an open cardioid pickup pattern and a 20Hz to 20 kHz frequency response, with an effective range (±2 dB) from 40 Hz to 18 kHz.
The DPA 4055’s remarkably flat frequency response curve has only a slight boost, starting at 8 kHz and extending out to about 12 kHz. Its phase response specification looks like one of DPA’s measurement microphones. Maximum SPL is 164 dB SPL (peak), and the dynamic range is 132 dB. Sensitivity is measured at 2 mV/Pa, -54 dB re. 1 V/Pa and distortion, THD <1% at 156 dB SPL.
Inside the mic is a miniature, transformerless, active electronics surface mounted on just a sliver of a printed circuit board that fits into the shaft of the mic. The DPA 4055 requires 2.0 mA of current from your +48-volt phantom power and has a rated output impedance of 380 ohms. The active electronics allow the mic to drive up to a 100-meter mic cable, making it perfect for both stages and studios.
The 4055’s capsule is internally shock-mounted and comes with the UA0961 locking mic clip. I like the design of this mic clip—when tightened, it grasps the mic’s body solidly and equally on all sides. I could place the mic at any height or angle and know that it would never fall out. The mic measures 132 mm (5.19 inches) in length and comes in a matte black finish with a two-part grille (removable for cleaning).
This is the first mic I’ve seen with an asymmetrical design. The 57 mm (2.2-inch) diameter of the grille is offset to the mic’s shaft to be more inline with the centerline of the clip and the mic boom’s arm, which I use to mic kick drums. Compared to other kick drum mics, the overall size of the DPA 4055 and its clip makes it easier to fit through the front hole of a kick drumhead and freely position it anywhere inside to capture the exact tone you desire.
For my test, I called in drummer/producer Charlie Waymire to help with the evaluation. We recorded with two different kick drums, using a transformerless input in his Trident 88 console. We put the mic in four typically used positions, on two different-sized bass drums within his kit. We tried both 24 x 14 and 20 x 14-inch Ludwig drums, each of which had round holes cut in the front head. The front head was a Remo Smooth White Powerstroke 4, and the other head was a Powerstroke 3.
Position 1: We placed the DPA 4055 right on top of the sandbags lying inside the drum, with the mic aimed at the beater. This is an old trick popular for live sound—you use one less mic stand! The 24-inch drum produced a higher-pitch sound that was distinctly heard separate from the bass and clearly stood out in the mix. Position 1 was better on the smaller 20-inch drum and actually bigger-sounding, with more low frequencies. Go figure!
Position 2: We tried a more conventional location, inside the drum, slightly off-center on a short boom stand and aimed at the beater. Both drums sounded good here, with the 20-inch having a much drier sound and the 24 being brighter, livelier and reminiscent of many drum kit recordings I’ve done.
Position 3: This was our favorite for both drums. The mic was on a short boom stand through the hole and about two inches into the drum—not as deep as Position 2. There was a little more leakage from the rest of the kit and a loud nearby guitar amp in the room, but I liked the balance, ambience and proximal punchy sound that the mic gave us in this position.
Position 4: We placed the 4055 out in front of the kick drum about two or three inches away from the front head, and it was exceptionally good for the larger 24-inch drum. This position captured the most subsonic energy, and there was plenty to work with later in the mix. The increased leakage from the rest of the kit and the room was acceptable because it fit the song’s genre.
Having the freedom to experiment with a kick drum mic that would always stay in any position I wanted, without worry of it overloading, allowed us to capture new and interesting tonalities. All four positions produced acceptable and predictable kick drum sounds without any EQ or compression. I liked that the DPA 4055 gave a flat, non-distorted, honest pickup of high-SPL sound that’s ready to be “carved” into shape later, if needed.
With the 4055 being a nearly “ruler-flat,” small- diaphragm condenser microphone, I had to try it on other instruments. On acoustic guitar, it required a little more gain than the SDC I usually use, but the results were solid. Using my Maag Audio PreEQ2 with the +25dB gain position switched in, it sounded clear and ready for EQ and/or compression in the mix.
Positioning the DPA 4055 halfway between the dust cover and the suspension of my Celestion Hellatone 30 12-inch in my 5-watt electric guitar amp sounded great. It did not compress like a dynamic mic would when subjected to high-SPL sound. It was also easy to aim and lock down the mic toward the dust cover to fine-tune the amount of high frequencies—always better than reaching for an EQ!
I’m thrilled that I got a look at the DPA 4055! It has become my utility “use on everything” mic because it is built well, it’s rugged and it takes loud levels with no problem. Invest in one for your mic locker!

Barry Rudolph is a Contributing Technical Editor at Mix Magazine; Music Mixer/Instructor at Tones 4 $ Studios; “New Toys” columnist for Music Connection Magazine; Contributing Writer for Resolution; and Editor/writer for Gear Lust. He explains, “Throughout my college years, I worked nights as a digital test tech for SoCal aerospace firms on NASA space programs. I started with the love of electronics in grade school and then music from being in a Rock band in high school and later on as a music mixer. After graduating college, I wondered into a recording studio and three years later engineered a #1 record.”
Tags ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅
© 2022 MIX is part of Future plc, an international media group and leading digital publisher. Visit our corporate site.

source

Unpacking the 1MORE EVO true wireless earbuds – Pocket-lint

Unpacking the 1MORE EVO true wireless earbuds  Pocket-lint
source

Studio One 6 is Here! – American Songwriter



You are here:

For complete transparency, I have to say right up front that I am a fan of PreSonus hardware products. I’ve put quite a few miles on PreSonus interfaces and other gear, and I have also used previous versions of their Studio One software. All that said, my music projects and collaborations vary, and, as a result, I have exposure to a few different music production applications. Like most of us, I have some pet peeves and favorite features I lean on. So, when I heard rumors of Studio One 6 (Sweetwater) coming, I was anxious to see if the new version would offer the types of features songwriters need, and maybe be versatile enough to convince me to stick with one DAW.
Two of the most important features for me I found advertised in the Studio One 6 documentation. First, even more than previous versions of the software, this new release promised to make creating music quick and easy. From the list of features, Studio One 6 looked to have everything a songwriter would need to record, mix, and master. Plus, there are features that provide for using the software for live performance—maybe not for everyone, but potentially useful. Second, there seemed to be a good deal of flexibility with the workflow, along with the ability to customize the interface so you can put what you need and use most often right at your fingertips. This was one of the first features I tried out.
The download, installation, and registration of Studio One 6 were easy. I did this at the PreSonus website where I had registered previous PreSonus products. The hardware requirements spelled out there were in line with other music software, essentially you’ll need macOS 10.14 or higher (64-bit only) or Windows 10 (64-bit only) and Windows 11 (64-bit only); an Internet connection for installation and activation; and enough storage for the Studio One package (Professional 40GB, Artists 20GB or Prime 2.6GB).
I chose the recommended installation path for the Professional version. However, I suspect that whatever path you install, there will be a good deal of downloading to do with all the tools provided. So, while it is possible to download the software over a WIFI connection, a hardwired Ethernet connection will save you time and avoid possible errors with large downloads. On your first start-up, Studio One finds any audio devices you have installed and walks you through the setup for each to select audio input and outputs and configuration options. You can, of course, easily change these to support new devices to tune devices for top performance.
One of the most useful customization features I went immediately for was the new Customization Editor, which allows the user to select just the tools and functions they need for what they happen to be focused on. This has the effect of tailoring the user interface so you can work faster and make repeated operations easier. It’s simple, but effective, as is Studio One’s drag-and-drop workflow employed throughout the software. If it makes sense, just select an item and move it where you need it.
There are three new features of this software which you’ll be hard-pressed to find in other music software. First is a Channel Overview window that provides a single place to look to get a consolidated view of all channel parameters. It’s a great idea given how complex mixes can get and I’m planning to use this a lot. Next, you’ll want to check out something called Fader Flip, a one-click time saver to send outputs to effects or cue mixes, and Track Presets with which you can set up on one or a bundle of tracks the way you like them and do it quickly. Track Presets are like templates for your favorite track setups.
Speaking of templates, I used to rely a lot on demo files provided with DAW software, copying them and using them as templates, overwriting the original parts with my own. That’s not necessary anymore because Studio One provides Smart Templates set up to do the kinds of sessions we do most often. Templates are already customized for you to accomplish highly focused tasks, like creating beats, to elaborate mix sessions. There are even very specialized operations like mastering a song—something I previously would look for specialized software to do. With automatic mix updating, DDP, and Redbook CD burning built-in, the mastering module gets pretty deep and deserves its own review, but the fact that it is included and so easy to operate is pretty impressive. Plus, PreSonus provides guided tutorials for the templates, so if you’ve never mastered them before, you have a place to start learning right away without leaving your session.
One of my favorite existing features of the software, and one that songwriters and arrangers will appreciate, is a powerful Arranger Track. It allows you to easily copy, reorder, move, or remove song sections. Being able to intuitively move verses and choruses with a simple drag-and-drop motion lets you quickly try out new forms while saving a lot of time and frustration over cut and paste methods, plus it’s much less error-prone.
All the features I tried outperformed as expected on a PC with an Intel i7 processor and 32GB of installed RAM, as did the more complex pop mix that downloaded with the software. However, there are lots of new features and plug-ins that deserve a deeper look. Something I didn’t spend a lot of time with but could be important to songwriters that need some help or inspiration in the harmony department, was harmonic editing features for both audio and MIDI using a Chord Track. There are also Lyric workflows that allow songwriters to add in their lyrics and even an advanced Video Track and the ability to edit and stream a final product with the Show Page—stream right from the software.
For recordists looking for an arsenal of virtual recording gear, Studio One 6 now sports a nice suite of Native effects plug-ins, including a familiar-looking De-Esser and Vocoder, plus a ProEQ3 for level responsive EQ adjustments. A Console Shaper emulates the sound of an analog console with control over drive, noise, and even true channel crosstalk. Five powerful virtual instruments include: Impact XT drum sampler; Presence XT sample-player; Mai Tai polyphonic analog modeling synthesizer; Mojito monophonic subtractive synthesizer; and Sample One XT sampler and sample editor.
If writing out parts, lead sheets, or entire scores is your thing, this version of Studio One incorporates some very impressive score writing ability with Notion notation provided by the Score Editor. And for delivering your finished product, Studio One has integrated cloud services you can investigate, including the PreSonus Shop, PreSonus Exchange, and bi-directional SoundCloud integration.
Studio One 6 puts everything a songwriter could ask for into one very comprehensive, all-in-one DAW package. Plus, PreSonus software engineers have obviously been paying attention to songwriters and home studio users because they’ve put ease-of-use high up on the list. Some favorite features for many will be the informative Track Overview that will simplify mixes and the Customization Editor that lets a user tailor the interface essentially hiding menu options that aren’t important to the task at hand. This allows users to focus on the tools when and where they need them. That’s smart! In general, all the new features are smart and useful.
The software did not download with many sample demo files, just one pop mix (albeit a very good one). Since I’m seeing this version early, perhaps PreSonus will add more to show off the virtual instruments and some track layout examples. However, the product more than makes up for that with a full complement of project templates that come with tutorials that support using Studio One 6 in many different ways–maybe that’s even better.
Studio One 6 does a great job of putting all the software tools a songwriter could need in one place. If you are new to digital recording or a less experienced DAW user, PreSonus has not only made the software intuitive but provided the help you need along the way with tooltips and even an optional help section on screen. That’s not to say that the software “dumbed down” in any way. There are simply a lot of entry points for users of all levels.
For advanced users, there are very useful plug-ins and recording features to keep the producer in you happy, as well as drag-and-drop and organizational functionality to help you get to your final product quickly. As a result, I’m sold on trying to make Studio One 6 my go-to DAW. It’s the only one I’ve worked with that puts it all together and allows me to tailor the software to fit the challenge at hand.
PreSonus Sphere 1-Year Membership $164.95 | Monthly Membership $14.95
Studio One 6 Professional $399.95
Studio One 6 Artist $99.95
Upgrade pricing for previous versions and crossgrades is available.
See more
Only members can comment. Become a member. Already a member? Log In.












Read More
Read More
Read More
Read More
Read More
Read More
For the latest songwriting tips, reviews, podcasts, and more.
© 2022 American Songwriter

source

Contract Management Software and Platform Market Growth and Share 2022 Competitive Landscape, Regional Demand, Latest Developments, Top Manufacturers and Opportunities till 2026 – Digital Journal

Hi, what are you looking for?
By
Published
The global Contract Management Software and Platform market study provides precise and high-quality industry size data, together with revenue projections and business geographic landscape. Additionally, it provides the CAGR status, gross margin, and overall growth prospects of the Top Key Players to support business progress- IBM Emptoris, Oracle Corporation, Selectica, Lintex, SciQuest, Bravo Solution SpA, Apttus Corporation
“Final Report will add the analysis of the impact of COVID-19 on this industry.”
Global “Contract Management Software and Platform Market” Research 2022 offers valuable insights on latest trends, growing demand in each region, top key players update with regional scope, and growth revenue. The Contract Management Software and Platform market report covers major significant strategies, business developments, competitive landscape analysis and business challenges over the forecast period. The report evaluates various segments and sub-segments of industry which includes industry types, applications and regions. In addition, the report provides comprehensive analysis on sales revenue, key growth patterns, key suppliers details, demand-supply scenario, and developing strategies of global
Get a sample PDF of the report at – https://www.marketresearchguru.com/enquiry/request-sample/17952903
Contract management software is a tool that electronically manages contract lifecycles process from creation to execution to post-contract analysis. This software incorporates for collaboration and internal authoring, legal review, external negotiation and contract tracking. It speeds up the negotiation times and decreases processing costs, ensures flexibility in the supply chain, and increases visibility into the positions and effectiveness of active contracts.
Global Contract Management Software and Platform Market Development Strategy Pre and Post COVID-19, by Corporate Strategy Analysis, Landscape, Type, Application, and Leading 20 Countries covers and analyzes the potential of the global Contract Management Software and Platform industry, providing statistical information about market dynamics, growth factors, major challenges, PEST analysis and market entry strategy Analysis, opportunities and forecasts. The biggest highlight of the report is to provide companies in the industry with a strategic analysis of the impact of COVID-19. At the same time, this report analyzed the market of leading 20 countries and introduce the market potential of these countries.
This report elaborates the Contract Management Software and Platform market size, market characteristics, and market growth of the industry, and breaks down according to the type, application, and consumption area of Contract Management Software and Platform market. The report also introduces players in the industry from the perspective of the industry chain and marketing chain and describes the leading companies.
Scope of Contract Management Software and Platform Market Report:
Get a sample PDF of the Contract Management Software and Platform Market Report
Global Contract Management Software and Platform market report provides key statistics on the state of the industry and is a valuable source of guidance and direction for companies and individuals interested in the market. The Contract Management Software and Platform industry trends and marketing channels are analyzed. Finally, the feasibility of new investment projects is assessed and overall research conclusions offered.
Some of the Key Players in the Contract Management Software and Platform Market include:
Highlights points of Contract Management Software and Platform market:
The report delivers a comprehensive study of all the segments and shares information regarding the leading regions in the market. This report also states import/export consumption, supply and demand Figures, cost, industry share, policy, price, revenue, and gross margins.
Inquire or Share Your Questions If Any Before the Purchasing This Report – https://www.marketresearchguru.com/enquiry/pre-order-enquiry/17952903
Contract Management Software and Platform Market Fragmented by Product Types:
Applications Covered in the Report are:
Regional Analysis:
The report outlines the regional development status of the global Contract Management Software and Platform market share and it also throws light on the supply and demand chain, profits, and market attractiveness in the various regions.
Reasons to buy Contract Management Software and Platform Market Report:
To Understand How Covid-19 Impact Is Covered in This Report – https://marketresearchguru.com/enquiry/request-covid19/17952903
Some of the key questions answered in this report:
Contract Management Software and Platform Market Research Scope Covers the Following Chapters:
Purchase this Report (Price 4000 USD for a Single-User License) –https://marketresearchguru.com/purchase/17952903
Detailed TOC of 2022-2026 Global Contract Management Software and Platform Market Report – Production and Consumption Professional Analysis (Impact of COVID-19):
1 Contract Management Software and Platform Market Definition and Overview
1.1 Objectives of the Study
1.2 Overview of Contract Management Software and Platform
1.3 Contract Management Software and Platform Market Scope and Market Size Estimation
1.4 Market Segmentation
1.4.1 Types of Contract Management Software and Platform
1.4.2 Applications of Contract Management Software and Platform
1.5 Market Exchange Rate
2 Research Method and Logic
2.1 Methodology
2.2 Research Data Source
3 Market Competition Analysis
3.1 COMPANY 1 Market Performance Analysis
3.1.1 COMPANY 1 Basic Information
3.1.2 Product and Service Analysis
3.1.3 Strategies for Company to Deal with the Impact of COVID-19
3.1.4 COMPANY 1 Sales, Value, Price, Gross Margin 2016-2021
3.2 COMPANY 2 Market Performance Analysis
3.2.1 COMPANY 2 Basic Information
3.2.2 Product and Service Analysis
3.2.3 Strategies for Company to Deal with the Impact of COVID-19
3.2.4 COMPANY 2 Sales, Value, Price, Gross Margin 2016-2021
…………………………
4 Market Segment by Type, Historical Data and Market Forecasts
4.1 Global Contract Management Software and Platform Production and Value by Type
4.1.1 Global Contract Management Software and Platform Production by Type 2016-2021
4.1.2 Global Contract Management Software and Platform Market Value by Type 2016-2021
4.2 Global Contract Management Software and Platform Market Production, Value and Growth Rate by Type 2016-2021
4.2.1 Type 1 Market Production, Value and Growth Rate
4.2.2 Type 2 Market Production, Value and Growth Rate
4.2.3 Others Market Production, Value and Growth Rate
4.3 Global Contract Management Software and Platform Production and Value Forecast by Type
4.3.1 Global Contract Management Software and Platform Production Forecast by Type 2021-2026
4.3.2 Global Contract Management Software and Platform Market Value Forecast by Type 2021-2026
4.4 Global Contract Management Software and Platform Market Production, Value and Growth Rate by Type Forecast 2021-2026
5 Market Segment by Application, Historical Data and Market Forecasts
5.1 Global Contract Management Software and Platform Consumption and Value by Application
5.1.1 Global Contract Management Software and Platform Consumption by Application 2016-2021
5.1.2 Global Contract Management Software and Platform Market Value by Application 2016-2021
5.2 Global Contract Management Software and Platform Market Consumption, Value and Growth Rate by Application 2016-2021
5.2.1 Application 1 Market Consumption, Value and Growth Rate
5.2.2 Application 2 Market Consumption, Value and Growth Rate
5.2.3 Others Market Consumption, Value and Growth Rate
5.3 Global Contract Management Software and Platform Consumption and Value Forecast by Application
5.3.1 Global Contract Management Software and Platform Consumption Forecast by Application 2021-2026
5.3.2 Global Contract Management Software and Platform Market Value Forecast by Application 2021-2026
5.4 Global Contract Management Software and Platform Market Consumption, Value and Growth Rate by Application Forecast 2021-2026
6 Global Contract Management Software and Platform by Region, Historical Data and Market Forecasts
6.1 Global Contract Management Software and Platform Sales by Region 2016-2021
6.2 Global Contract Management Software and Platform Market Value by Region 2016-2021
6.3 Global Contract Management Software and Platform Market Sales, Value and Growth Rate by Region 2016-2021
6.3.1 North America
6.3.2 Europe
6.3.3 Asia Pacific
6.3.4 South America
6.3.5 Middle East and Africa
6.4 Global Contract Management Software and Platform Sales Forecast by Region 2021-2026
6.5 Global Contract Management Software and Platform Market Value Forecast by Region 2021-2026
6.6 Global Contract Management Software and Platform Market Sales, Value and Growth Rate Forecast by Region 2021-2026
………………………………………………………
27 Market Dynamic Analysis and Development Suggestions
27.1 Market Drivers
27.2 Market Development Constraints
27.3 PEST Analysis
27.3.1 Political Factors
27.3.2 Economic Factors
27.3.3 Social Factors
27.3.4 Technological Factors
27.4 Industry Trends Under COVID-19
27.4.1 Risk Assessment on COVID-19
27.4.2 Assessment of the Overall Impact of COVID-19 on the Industry
27.4.3 Pre COVID-19 and Post COVID-19 Market Scenario
27.5 Market Entry Strategy Analysis
27.5.1 Market Definition
27.5.2 Client
27.5.3 Distribution Model
27.5.4 Product Messaging and Positioning
27.5.5 Price
27.6 Advice on Entering the Market
For Detailed TOC – https://marketresearchguru.com/TOC/17952903#TOC
Contact Us:
Market Research Guru
Phone: US +14242530807
UK +44 20 3239 8187
Email: [email protected]
Web: https://www.marketresearchguru.com
Our Other Reports:-
Industrial Peristaltic Pump Hose Market
Air Traffic Control Equipment Market
Automotive Antifreeze/Coolant Market
Protective Boots Market
Global No Code Software Tool Market
Robotic Surgery Devices Market
PPR Pipes and Fittings Market
High-Temperature Plastics Market
Music Rights Management Market
Ammonium Metavanadate Market
Press Release Distributed by The Express Wire
To view the original version on The Express Wire visit Contract Management Software and Platform Market Growth and Share 2022 Competitive Landscape, Regional Demand, Latest Developments, Top Manufacturers and Opportunities till 2026

If you’ve got no other options, there’s always sanity.
Chipmakers plunged in Asian trade Tuesday over new US measures to limit China’s access to high-end semiconductors with military uses.
While people across Europe are being urged to save energy, Switzerland’s Bavona Valley never been plugged into the power network.
Traders grow increasingly fearful that more big interest rate hikes will tip economies into deep recessions.
COPYRIGHT © 1998 – 2022 DIGITAL JOURNAL INC. Sitemaps: XML / News . Digital Journal is not responsible for the content of external sites. Read more about our external linking.

source

New report explores ways to reduce methane emissions onboard – SAFETY4SEA – Safety4Sea

Credit: Mærsk Mc-Kinney Møller Center for Zero Carbon Shipping
The Mærsk Mc-Kinney Møller Center for Zero Carbon Shipping published its second research paper in its Onboard Vessel Solutions series, focusing on reducing methane emissions onboard vessels.
Liquefied electro- and bio-methane have been identified by the Mærsk Mc-Kinney Møller Center for Zero Carbon Shipping (MMMCZCS) as potential low-emission alternative fuel pathways.
In addition, given the rapid expansion of the LNG-fueled vessel fleet and industry projections, the use of LNG as a fuel for the maritime industry will continue well into the future. The use of these methane-based fuels, however, present both a regulatory compliance and climate risk related to onboard vessel methane emissions, in particular methane slip from internal combustion engines, that increases a vessel’s overall CO2-equalivent (CO2-eq) emissions.
Potential and upcoming regulation of onboard vessel methane emissions presents a risk for methane-based fueled vessel owners, operators, and charterers.
said MMMCZCS.
While CO2 is the main source of shipping’s climate impact with over 90% of total greenhouse gas (GHG) emissions, methane has a higher climate impact in terms of global warming potential (GWP). As a result, methane emission reduction can be an efficient way to reduce a vessel’s overall CO2-eq emissions, allowing compliance with upcoming regulations and increasing the viability and competitiveness of methane-based alternative fuel pathways.
A dedicated MMMCZCS working group was established to study reducing methane emissions onboard vessels, which is one vessel specific emission-related consideration for methane-based alternative fuel pathways. Based on its results, the following conclusions have been made:
#1 A vessel’s total methane emissions should be considered: While the main source of onboard vessel methane emissions is methane slip from main and auxiliary internal combustion engines, total methane emissions of a vessel is highly dependent on a vessel’s operations, system dimensioning, machinery configurations and connected technologies. In addition to selecting baseline engine and potential after-treatment technologies, system solutions can significantly reduce onboard vessel methane emissions.
#2 Cost-efficient onboard vessel methane emission reduction is possible but limited for existing vessels: For the vessels studied, onboard methane emissions can be cost-efficiently reduced by 40-80% for a newbuild and 20-50% for an existing vessel through the selection of baseline engine technologies and the use of after-treatment technologies and system solutions. These reductions translate to onboard methane emissions being reduced from 7-14% of total tank-to-wake (TTW) GHG emissions to 2-8% for a newbuild and 4-12% for an existing vessel. Cost efficiency is considered as being less than the forecasted cost of bio-methane and is associated with CO2-eq abatement cost of less than about $200/tonCO2-eq. Ship owners should carefully consider onboard methane emission reduction at the newbuild phase to avoid potential costly modifications later in the vessel’s lifetime. While it is technically feasible to further reduce onboard vessel methane emissions beyond these levels, utilizing other options like the use of low-emission fuels could be more cost-efficient if further GHG emission reductions are required.
#3 Reducing onboard vessel methane emissions are needed to increase viability of electro- and bio-methane fuel pathways: Reducing onboard vessel methane emissions to these cost-efficient levels increases the longer-term viability of the electro- and bio-methane fuel pathways, however, it is still unclear if upstream well-to-tank fugitive emissions can be reduced to acceptable levels. Using the FuelEU methodology and cost-efficient onboard methane emission reduction measures, GHG WTW emissions can be reduced to 5-9 gCO2eq/MJ using 100% electro-methane and hydrothermal liquefaction (HTL) Oil as a pilot fuel (a 90-95% decrease relative to heavy fuel oil).
#4 Proposed FuelEU for Maritime limits are not strict enough to activate onboard vessel methane emission reduction: For the vessels studied, GHG emission levels are already compliant with the 2025 and 2030 FuelEU GHG intensity index limits without introducing any onboard vessel methane emission reduction measures. This is due to LNG’s lower CO2 emission factor used within its 100-year GWP methodology. If a CO2-eq regulation with the proposed FuelEU limits is introduced, no emission reduction actions would be needed until 2035.
#5 Regulation is required for widespread adoption of onboard vessel methane emission reduction technologies and solutions: Without strong incentives or regulatory requirements to reduce methane emissions, there is limited commitment from ship owners to adopt methane emission reduction technologies and solutions. There are ongoing discussions at the IMO to include methane into its LCA methodology, a CO2-eq approach like FuelEU. There is also the possibility that methane is regulated in a more direct way using a vessel’s Technical File like NOX emissions. This type of regulation could more directly target methane slip levels and the need to reduce them onboard the vessel either for newbuilds or existing vessels if retroactive.
EXPLORE MORE AT MMMCZCS’S REPORT ON methane emissions
Your email address will not be published. Required fields are marked *






Are you satisfied with industry’s efforts towards wellbeing?

Did you know that the Detention Rate is increasing in Paris MoU? 7% more on the Detention Rate for Bulk Carriers in 2020 vs. 2019.
© 2021 SAFETY4SEA
© 2021 SAFETY4SEA

source

This $50 camera proves you're probably overspending for your smart home – ZDNet

Most Popular
‘ZDNET Recommends’: What exactly does it mean?
ZDNET’s recommendations are based on many hours of testing, research, and comparison shopping. We gather data from the best available sources, including vendor and retailer listings as well as other relevant and independent reviews sites. And we pore over customer reviews to find out what matters to real people who already own and use the products and services we’re assessing.
When you click through from our site to a retailer and buy a product or service, we may earn affiliate commissions. This helps support our work, but does not affect what we cover or how, and it does not affect the price you pay. Neither ZDNET nor the author are compensated for these independent reviews. Indeed, we follow strict guidelines that ensure our editorial content is never influenced by advertisers.
ZDNET’s editorial team writes on behalf of you, our reader. Our goal is to deliver the most accurate information and the most knowledgeable advice possible in order to help you make smarter buying decisions on tech gear and a wide array of products and services. Our editors thoroughly review and fact-check every article to ensure that our content meets the highest standards. If we have made an error or published misleading information, we will correct or clarify the article. If you see inaccuracies in our content, please report the mistake via this form.
Switchbot gained most of its popularity from the release of its Smart Switch Button Pusher: An admittedly endearing device that presses buttons for you, automatically or controlled via an app, helping make outdated devices a bit smarter. 
Since then, the company has widened its retrofitting endeavor to include more gadgets like its SwitchBot Curtain Smart Electric Motor, an IR blaster, and, more recently, a SwitchBot Wi-Fi Smart Lock that doesn’t require replacing your existing deadbolt.
Joining the ever-growing list of budget-conscious smart home products is the SwitchBot’s Pan/Tilt Cam 2K. The camera is a true upgrade to its predecessor with 2K video and an f2.0 aperture, which make for a clearer and brighter picture.The Pan/Tilt Cam’s360-degree motion tracking feature also makes it a great camera not only for home security but as a pet cam or a baby monitor.
Review: SwitchBot Lock: A smart lock solution for renters and HOA residents
With this indoor security camera, users can easily view a live video feed, control camera movements, and customize notifications and alert settings on the SwitchBot app from their mobile devices. If you’re away from home, you can check in from your phone and pan around to see what’s going on while you’re out, to check where your cat is, or use two-way talk to tell your dog to get out of the kitchen trash can.
Since it’s also compatible with Alexa and Google Assistant, you can add this camera as part of a routine or view the live feed in an Echo Show or Google Nest Hub while you’re home.
Everything included with SwitchBot’s Pan/Tilt Cam 2K.
Out of the box, the SwitchBot Pan/Tilt Cam 2K comes with a 6.5-foot long Micro USB to USB cable and power brick, a mounting stand complete with mounting hardware, and even a template to help you measure exactly where to install the mounting plate. 
When I first took the camera out of the box, it felt a bit too clunky and large. But once I got it set up and panning around, it looked like a tiny robot and, I daresay, kind of cute. 
The SwitchBot is a mini robot that can keep tabs on its surroundings.
Setting up the camera was an uncomplicated affair; I simply plugged it in and the SwitchBot app on my phone quickly discovered it. Once the camera was added to the app, I was able to connect it to Wi-Fi, view the video feedback, control the camera movement, and receive motion alerts. The whole setup process took me only a few minutes. 
This indoor security camera can also pan 180 degrees on both sides and tilt up and down, for complete 360-degree coverage. The motion tracking feature follows objects in motion, so you never miss a thing, whether you use it as a baby monitor, a pet cam, or as standard a security camera. Once you have it set up in the SwitchBot app, you can keep an eye on what’s important to you right from your phone, no matter where you go.
Also: The 5 best security cameras
The next step of setting up the camera was figuring out where to put it in my home. 
The camera itself is for indoor use only, so it’s not going to replace your surveillance system outside. However, with SwitchBot’s ecosystem including a line of other cameras and sensors, the Pan/Tilt camera can be set up as a trigger for an alarm or as a spotlight when someone walks by.
Close-up view of the Pan/Tilt Camera 2K.
Motion detection on this camera can also trigger an audible alarm emitted from the device itself, making it useful to alert unwanted visitors as a standalone device, which is pretty handy. This is only $50 after all. 
Also: The best home security systems
The ability to both pan and tilt in 360 degrees with motion tracking makes the SwitchBot a very versatile camera. I have a four-month-old puppy that is bound to get into everything, so I considered using the gadget as a pet cam for him, especially since he’s a wiggly one and the motion tracking will keep me in the know of any movement.
However, I also have a sunroom that I like to keep at least one camera in, so with this being a strictly indoor camera, I went with that option to start. 
Privacy mode lets you store away the camera lens.
If you want to enable privacy mode on the Pan/Tilt Cam, you have the option to completely hide the lens downward so it’s not recording or detecting motion when you don’t want it to be. 
Though I’ve only been using this camera for a bit over a week, it’s become a great addition to my smart home setup. Because it’s marketed as a pet cam, baby monitor, and security camera, I’ll make a complete review after I’ve seen how it performs at each one of those tasks.
Also: Best pet cameras  
For now, I’d say the SwitchBot Pan/Tilt Cam 2K is definitely worth the $49 price tag, even more so when you combine that with an Amazon coupon or discount. For that price, you get a device that expertly combines 2K video, motion detection, 2-way audio, expandable storage, voice control via Alexa and Google Assistant, and night vision into a 360-degree motion tracking security camera.
SwitchBot also offers a line of security products, like the SwitchBot Security Indoor Camera, SwitchBot Smart Motion Door Sensor, and even SwitchBot Smart LED Strip Lights, as well as other accessories that enhance the overall smart home experience. 

source

Kevin McCarthy urged against politicizing Jan. 6: Audio recording – Washington Examiner

House Minority Leader Kevin McCarthy (R-CA) pushed against politicization in the aftermath of the Capitol riot on Jan. 6, 2021, according to new audio recordings.
The recordings were captured by former Washington, D.C., police officer Michael Fanone during a meeting with McCarthy and others after the riot.
FBI AGENT REVEALS ‘ZOMBIE KILLER’ AXES RECOMMENDED IN OATH KEEPER PLANS FOR CAPITOL RIOT
In one of the recordings, the former D.C. police officer pushed back against McCarthy after the minority leader advocated a depoliticized solution to the riots, saying that the riots were “political because it happened here on Capitol Hill, and it involved a political movement.”
Also included in the undated recordings, McCarthy told the mother of D.C. police officer Brian Sicknick, who died the day after the riot of natural causes, that he did not believe former President Donald Trump knew the significance of the riot when he spoke to him.
“I’m just telling you from my phone call I don’t know that he did know at that point,” McCarthy said in response to Gladys Sicknick asking why Trump did not call off the mob sooner.
CLICK HERE TO READ MORE FROM THE WASHINGTON EXAMINER
The recordings from Fanone were released as the House select committee investigating the Jan. 6 riot is set to hold its final hearing Thursday at 1 p.m., less than four weeks before the midterm elections.

source

Fort Myers Beach residents pulling together in hurricane cleanup – Fort Myers Beach Talk

Ryan Cavanaugh and Sara Cavanaugh of Miramar Street. Photo by Nathan Mayberg
The torrent of devastation that Hurricane Ian left behind in Fort Myers Beach is an incalculable destruction that human beings are not programmed to process or even comprehend.
All Fort Myers Beach residents were able to finally return to their homes Sunday, a week after the island was closed off by the fire department and National Urban Search and Rescue to allow for search and rescue efforts, and 11 days after Hurricane Ian landed on Fort Myers Beach.
Residents who returned were still processing the shock of the storm’s magnitude.
“Send help,” said Miramar Street resident Steve Martin.
Every building on Fort Myers Beach was damaged by Hurricane Ian, a Category 4 storm blamed for more than 50 deaths in Lee County and more than 100 deaths statewide. The exact figure for Fort Myers Beach hasn’t yet been released. More numbers will arrive down the road – how many homes destroyed, how much property damage, but it is safe to say that no building was spared and Fort Myers Beach will never be the same. The cleanup will take months and the recovery will take years.
Residents of Miramar Street (left to right) on Fort Myers Beach are Jodi Bellefeuille, Ryan Cavanaugh, Sara Cavanaugh, Laurie Martin, Jacquie Velazquez, Chris Rusk. Steve Martin and Jennifer Rusk.
Residents who returned to the island Sunday encountered tons of debris piled along the streets as they worked to clean out mud-filled homes, pick up debris that had made their way to their properties from neighboring homes and businesses.
Some homes floated down the road and were stuck in the middle of residential streets.
Many of the homes will have to be gutted out, roofs will need to be replaced.
Amid swarms of flies and bugs feeding upon the waste left by the hurricane, residents complained about the delay in being allowed back in their homes as mold has grown inside.
The good weather since the hurricane was dampened Sunday as an extended, heavy downpour added to the difficulties of the recovery efforts.
Town of Fort Myers Beach Town Hall, photo by Nathan Mayberg
On Miramar Street, where there is a mixture of old cottages and single-family homes, residents were optimistic about the recovery though clearly shocked by the daunting task which lay ahead. They put together a sign that stated “We Ain’t Leavin Ian #WeAre FMB.”
For Miramar Street resident Jennifer Rusk, the disaster has her thinking about others and the community the same way she did before the hurricane when she would stand out at Times Square, Bowditch Point Park and Newton Beach Park handing out pamphlets of information about the environment and Fort Myers Beach plants and birds. Those parks are still standing despite heavy flooding from Hurricane Ian but the pamphlets of information Rusk had worked hard to gather over the last year with the assistance of the Florida Fish and Wildlife Conservation Commission, J.N. “Ding” Darling National Wildlife Preserve, Clinic for the Rehabilitation of Wildlife and was destroyed by the water and mold from Hurricane Ian.
“Our house is still standing but no roof and the house will need to be totally gutted. I will rebuild it,” Rusk said. Water damage flooded out her first floor and damaged most of her second floor as well with water leaking through the roofs and leaving her couches with black mold. Her pool and hot tub were destroyed. Her backyard was turned into overflow from neighboring Key Estero Shops. She found a turtle she is trying to save.
In a best-case scenario, Rusk said it could take six months to rebuild and she does not know where she will live. The Federal Emergency Management Agency has begun providing her disaster assistance while she stays at a hotel.
Rusk said town residents need help from all sources – Red Cross, food, water, cleaning supplies- bleach- working heavy duty gloves, safety glasses.
Chapel by the Sea Presbyterian Church on Fort Myers Beach, photo by Nathan Mayberg
“We’re going to rebuild,” Rusk said regarding her home on Miramar Street. Rusk compared Miramar Street to a “warzone,” a description that covered most of the town.
Rusk said the impact was “overwhelming, heartbreaking. I am fortunate, I am happy to be alive, I am happy that we made it out and I am sad for the souls of Fort Myers Beach that we lost. I am emotional, I am angry,” she said. “I am sad for everyone.”
For days, access to Miramar Street was cut off by a vacation rental building that once fronted Estero Boulevard and which was carried by the surge of Hurricane Ian into the middle of the road.
On Sunday, passage through the road was still difficult and blocked by mountains of debris piled high.
“This will be a long road of recovery ahead for our community, we will get through this and be better and stronger,” Rusk said. Rusk said the good news for Miramar Street residents is that the structures of their homes were in good shape despite massive mud and water damage. Mold has begin to accumulate due to the water damage and the delays in residents being able to access their homes to dry and air out the homes.
Fort Myers Beach Mayor Ray Murphy said “residents are making progress” and disaster relief teams are making progress but that “it’s going to be a while” before the town returns to a semblance of a community it once was.
The good news, Murphy said, is that the town has been given pledges from President Joe Biden and the federal government that all help that is needed will be given.
“He reassured me that the full weight of the federal government will be here to help us,” Murphy said.
Ryan and Sarah Cavanaugh use their home on Miramar Street largely for vacation rentals. They have had the home since 2013 and now live on St. Kitts most of the year working as teachers of veterinary medicine. Their home was built in 1944, making it one of the older homes still standing on Fort Myers Beach. Mrs. Cavanaugh said the all-impact windows saved the house from being lost though it took a lot of water and mold damage. They lost their family photo albums and Mrs. Cavanaugh’s wedding dress. “The house is still standing. We’re thankful,” Mr. Cavanaugh said.
Miramar Street residents Steve and Laurie Martin rode out Hurricane Ian from their home and watched as the storm surge reached about 10 feet, flooding the first floor of their residence. They had a front-row seat to watching the devastation of Hurricane Ian, as it sent a vacation rental building off the ground on Estero Boulevard and dropped it in the middle of the residential street. They saw a roof blow off a neighbor’s property and land in between two houses.
The couple run a production company, Laurie Star Productions, and have performed music around the county and around the world.
“It was quite frightening,” Mr. Martin said. Asked what he lost in his home, Martin said “our whole first floor,” as well as the landscaping they had worked on around their home for 24 years. They lost speakers, recording gear, amplifiers and microphones. “We saved our guitars and we saved our sense of humor,” he said.
The worst part of the hurricane was the “destruction of the whole island,” Mr. Martin said. “It’s going to take a long time to clean up. Old Fort Myers Beach, our charming little musical island, is never going to be like it was. It’s going to be different now. Hopefully it’s up to us to build it as good as we can.”

Copyright © FORT MYERS – Beach Observer and Beach Bulletin | https://www.fortmyersbeachtalk.com | 19260 San Carlos Blvd, Bldg. C, Fort Myers Beach, FL 33931 | 239-463-4421

source

Crafted by a master's hands in the Colorado mountains, the bamboo fly rod lives on – Colorado Springs Gazette

Daily Weather Report
Powered By:

Mike Clark, 75, and his sole employee, Kathy Jensen, take a lunch break to fish the North Saint Vrain Creek in Lyons on Sept. 26.
Kathy Jensen uses a variety of silk thread, seen at top, to customize each bamboo fly-fishing rod she and Mike Clark make at South Creek Ltd. The details of a South Creek Ltd. rod are seen above. Each rod is signed and numbered by Mike Clark, as seen at right.
Mike Clark and his sole employee at South Creek Ltd., Kathy Jensen, call a lunch break and fish the North Saint Vrain Creek in Lyons on a recent Monday. Clark makes about 25 bamboo fly rods a year. “I can’t stand at that bench like I used to,” he says.
Mike Clark’s sole employee, Kathy Jensen, uses a variety of silk thread to customize each bamboo fishing rod made by the two at South Creek Ltd. in Lyons.
Mike Clark and Kathy Jensen close shop and head out for a fishing break Monday, Sept. 26, 2022, at the South Creek, Ltd., storefront on Main Street in Lyons. Colo. (The Gazette, Christian Murdock)
Mike Clark and his sole employee Kathy Jensen take a lunch break to fish the North Saint Vrain Creek in Lyons, Colo., Monday, Sept. 26, 2022. (The Gazette, Christian Murdock)
Each bamboo fly fishing rod made at South Creek, Ltd., is signed and numbered by Mike Clark. (The Gazette, Christian Murdock)
Mike Clark, 75, shows a piece of the spilt bamboo that will join other pieces to create one of his bamboo fishing rods Monday, Sept. 26, 2022, at his shop in Lyons, Colo. (The Gazette, Christian Murdock)
Mike Clark sits in his shop along Main Street in Lyons, Colo., Monday, Sept. 26, 2022. Clark started making his custom bamboo fly rods in 1979.(The Gazette, Christian Murdock)

Features writer
Mike Clark, 75, and his sole employee, Kathy Jensen, take a lunch break to fish the North Saint Vrain Creek in Lyons on Sept. 26.
Kathy Jensen uses a variety of silk thread, seen at top, to customize each bamboo fly-fishing rod she and Mike Clark make at South Creek Ltd. The details of a South Creek Ltd. rod are seen above. Each rod is signed and numbered by Mike Clark, as seen at right.
Mike Clark and Kathy Jensen close shop and head out for a fishing break Monday, Sept. 26, 2022, at the South Creek, Ltd., storefront on Main Street in Lyons. Colo. (The Gazette, Christian Murdock)
Each bamboo fly fishing rod made at South Creek, Ltd., is signed and numbered by Mike Clark. (The Gazette, Christian Murdock)
Mike Clark, 75, shows a piece of the spilt bamboo that will join other pieces to create one of his bamboo fishing rods Monday, Sept. 26, 2022, at his shop in Lyons, Colo. (The Gazette, Christian Murdock)
LYONS • It’s not often Mike Clark shows guests to the back of his shop. It is, after all, his space. His domain. A little, wooden world of fine, meticulous work.
One might say magic happens here, if they are so romantically inclined to the bamboo fly rod. Clark is not all that inclined, a man of few words between drags from his Marlboro Red.
More inclined was Norman Maclean, who wrote: “Grace comes by art, and art does not come easy.” Clark does not like being called an artist. He is not an artist making something to be displayed. He is rather a craftsman making something to be used, a tool — and ideally by someone who is more serious about fishing than they are about the Maclean-inspired movie, “A River Runs Through It.”
Around a craftsman, it tends to be messy. “Sorry,” the bearded, ponytailed 75-year-old says to his guests, slowly bending over. “I’ll get those cat treats out of the way.”
Mike Clark and his sole employee at South Creek Ltd., Kathy Jensen, call a lunch break and fish the North Saint Vrain Creek in Lyons on a recent Monday. Clark makes about 25 bamboo fly rods a year. “I can’t stand at that bench like I used to,” he says.
Patch and Smudge live with Clark here in the business that doubles as his home. South Creek Ltd. is a plainly named business for a plain man. Built over four decades, Clark’s reputation is anything but.
Just ask John Gierach, the author and fly-fishing legend who happens to live nearby in these river-cut mountains of northern Colorado.
“I’ve had people come out and visit me and say, ‘Can we go see Mike?’ Like they’re asking if I can get them an audience with Mahatma Ghandi or something,” Gierach says. “He’s known as one of the old masters.”
An old master of a rare, centuries-old craft.
Long before today’s graphite and fiberglass rods, there was bamboo. The mighty grass rises 12 feet high in a corner of Clark’s shop, shipped from China. Clark spends his days transforming it, not so unlike 19th-century master Hiram Leonard.
Culms are split and tapered into smaller strips, sanded and planed and glued together to a point measuring so many thousandths of an inch. It’s a precise, slow process also of varnishing, silk-wrapping, heating, cooling and waiting. It’s a process Clark refuses to change, just like his hand tools from 1979. That’s when he built his first bamboo fly rod.
Mike Clark and his sole employee Kathy Jensen take a lunch break to fish the North Saint Vrain Creek in Lyons, Colo., Monday, Sept. 26, 2022. (The Gazette, Christian Murdock)
The product is a dream for the purist of the sport’s pure — something of an Excalibur starting around $3,000.
And few, Gierach says, are producing like Clark.
“I know some rod makers, they’re hobbyists who make a couple of rods a year and sell them,” Gierach says. “But Mike, you know, he lives above his shop, he turns on the lights, walks down the staircase, pets the cats, gets a cup of coffee and goes to work.”
Still, due to his refusal of machines and extra manpower, his supply is limited. Clark says he’s making around 25 rods a year. “I can’t stand at that bench like I used to,” he says.
His wait list hovers around three years. “At one time, the backlog was almost six years,” he says. “That’s when I said, ‘That’s enough.’”
That’s when he enlisted his sole employee of today, Kathy Jensen. She was an unlikely choice, a transplant from the California tech world. They met at the local coffee shop.
“I told him, ‘I’ve never picked up any rod, let alone a fly rod. I don’t know anything,’” she says. “He said, ‘Perfect. When can you start?’”
Mike Clark sits in his shop along Main Street in Lyons, Colo., Monday, Sept. 26, 2022. Clark started making his custom bamboo fly rods in 1979.(The Gazette, Christian Murdock)
Now she specializes in the rod’s aesthetics — the finishing flourishes of metals, woods and colorful wraps. Nothing too colorful, Jensen warns customers, at Clark’s behest. Earth tones, she implores.
“We like to make traditional kind of rods,” Jensen says. “Not carnival rods.”
She likes that creative part of the job more than the paperwork and customer service. But someone has to tend to that part.
“That damn tin block over there,” Clark says, motioning to the computer, “I hate it.”
He’d rather do away with his cellphone, too. “Only three people have the number, and that’s the way it’ll stay,” he says.
Clark is no romantic, and yet he’s best described by poetry framed on the wall. It’s a testament by the late writer Robert Traver.
Mike Clark’s sole employee, Kathy Jensen, uses a variety of silk thread to customize each bamboo fishing rod made by the two at South Creek Ltd. in Lyons.
“I fish because I love to; because I love the environs where trout are found, which are invariably beautiful, and hate the environs where crowds of people are found, which are invariably ugly,” Traver professed. He loved fishing “because, in a world where most men seem to spend their lives doing things they hate, my fishing is at once an endless source of delight and an act of small rebellion.”
Before making bamboo fly rods, Clark hated what he did. He hated the job that had him plowing snow and towing cars around Boulder County, that had his Motorola buzzing in the middle of the night for emergencies.
And before that, out of high school in Lakewood, he hated his time in Vietnam. He returned to an ungrateful nation in 1969.
“I hid for about nine months,” Clark says.
He moved to the mountains. He did a lot of fishing. He did what he did in his childhood, always looking forward to the weekends when his dad loaded the camper and in the crisp, early mornings, the family embarked to some far-off lake.
His dad fished with bamboo. Clark thought about that in hard times, thought about casting it in the yard as a kid. It was, he later decided, the simplest representation of the simplicity he sought.
So he would put more of that into the world — one rod at a time, hand-made after hand-made.
And so he continues today, unrelenting, uncompromising.
“I think it’s perfectionism,” Gierach says. “You want to do it just as well as it can be done, or as well as you can do it. And you never quite decide, OK, I’ve got it nailed down.”
But Clark is learning to draw boundaries. Someone recently called about coming in for business. It’d be Wednesday or Thursday, the caller said.
“Make it Tuesday or Thursday,” Clark countered. “Wednesday, I’m going fishing.”
Even if you’ve got the money to spend — starting around $3,000 — you might have to wait a few years to get your own, custom bamboo fly rod at South Creek Ltd. Maker Mike Clark has a long wait list. But you can check out pre-used rods at the shop, where Clark also keeps a personal collection.
415 Main Street, Lyons; 303-823-6402, southcreekltd.com
You get a few different reactions when you’re seen riding a unicycle in the mountains.
Features writer
Seth is a features writer at The Gazette, covering the outdoors and the people and places making Colorado colorful.
{{description}}
Email notifications are only sent once a day, and only if there are new matching items.
The city of Colorado Springs is weighing whether to gate Old Stage Road to reduce late-night shooting across private property, vandalism, lighting fireworks, dumping and other illegal activity.

source

‹ Previous Next ›