Blog

TTAB Finds "EQ LEARNING" Deceptively Misdescriptive Of Employment Counseling Services – Trademark – United States – mondaq.com

Mondaq uses cookies on this website. By using our website you agree to our use of cookies as set out in our Privacy Policy.
The Board affirmed a Section 2(e)(1) refusal of the proposed mark EQ LEARNING, finding it to be deceptively misdescriptive for employment counseling and related educational services. A dictionary definition and third-party website evidence regarding the meaning of EQ, coupled with the applicant's own responses to a Rule 2.61 request for information, proved fatal to the application to register. In re Res-Care, Inc., Serial No. 90309408 (September 14, 2022) [not precedential] (Opinion by Judge Angela Lykos).
1231192a.jpg
Section 2(e)(1) prohibits registration on the Principal Register of designations that are deceptively misdescriptive of the identified goods (absent a showing of acquired distinctiveness under Section 2(f).) A mark is considered deceptively misdescriptive if (1) it misdescribes a quality, feature, function, or characteristic of the goods or services with which it is used; and (2) consumers would be likely to believe the misrepresentation. In re Dolce Vita Footwear, Inc., 2021 USPQ2d 479, at *9 (TTAB 2021). [Note: if the misdescription is material to the purchasing decision, the proposed mark is deceptive under Section 2(a) and is completely barred from registration].
Examining Attorney E. Reeves submitted an entry from THE AMERICAN HERITAGE DICTIONARY OF THE ENGLISH LANGUAGE showing that “EQ” is an abbreviation for “emotional intelligence.” She also made of record third-party websites using the term EQ in connection with employment counseling and educational services as signifying the ability to manage social interactions, emotions and conflict at work.
Taken together, this evidence demonstrates that the abbreviation EQ modifies the noun LEARNING to indicate a type employment counseling and instruction. Thus, EQ LEARNING merely describes a significant characteristic or feature that the services could plausibly possess.
The Examining Attorney made an information request under Rule 2.61(b), which included the following question: “Will applicant's educational services teach emotional intelligence?” Applicant responded: “No.”
Thus the first prong of the test was met . The next question was whether a reasonably prudent consumer would be likely to believe the misrepresentation. The Examining Attorney provided evidence showing that competitors in the field promote the benefits of employment counseling and education services designed to improve the consumer's EQ or “emotional intelligence.”
This evidence shows that consumers are accustomed to encountering in the marketplace career counseling and education services touting the advantages of the acquisition of knowledge and learning skills pertaining to EQ or emotional intelligence. It is therefore likely that the reasonably prudent consumer (i.e. job seekers, and those looking for career advice or advancement) will be deceived by Applicant's misrepresentation.
Applicant argued that consumers will recognize EQ as a reference to the “evidenced-informed Talent Delivery Model (TDM)- Employability Quadrants (EQ)” that applicant uses.” The Board was unconvinced because prospective consumers would likely be unfamiliar with Applicant's “evidenced-informed Talent Delivery Model (TDM)- Employability Quadrants (EQ),” and unlikely to attribute any meaning to Applicant's mark other than “emotional intelligence.”
And so, the Board affirmed the refusal.
The content of this article is intended to provide a general guide to the subject matter. Specialist advice should be sought about your specific circumstances.
  © Mondaq® Ltd 1994 – 2022. All Rights Reserved.

Passwords are Case Sensitive

Forgot your password?
Free, unlimited access to more than half a million articles (one-article limit removed) from the diverse perspectives of 5,000 leading law, accountancy and advisory firms
Articles tailored to your interests and optional alerts about important changes
Receive priority invitations to relevant webinars and events
You’ll only need to do it once, and readership information is just for authors and is never sold to third parties.
We need this to enable us to match you with other users from the same organisation. It is also part of the information that we share to our content providers (“Contributors”) who contribute Content for free for your use.

source

Zac Burden: "Through these stories, you really get a sense of what Kirksville has meant to this region—to the entire state" – KBIA

Zac Burden spoke with the Missouri on Mic team in Kirksville.
He’s the mayor there, and he stopped by our booth at the farmers market in May, to talk about his love of the town and the community’s history.
Zac Burden: I serve as mayor, which is an elected position. We’re actually elected to the council and we serve on three year terms.
There are five of us, and they’re on staggered terms. And we select amongst the council members each year, one of us to serve as mayor.
So I’m in my fourth year as mayor.
We hire a city manager to do the day to day operations of the city and Mari Macomber serves in that role and does a fantastic job on that, and has for many, many years.
So the council position is a part time position.
And my parents predicted it at the time: they said, ‘Oh, you’re gonna fall in love with this town, you’re probably gonna stay here forever. And shoot, you might end up being mayor someday.’
And they were just kidding. But that ended up being rather prophetic.
So I love this community. I’ve lived here for 23 years now, and it is most assuredly home.
You know, I’m really passionate about the history of Kirksville, the history of Northeast Missouri, the history of Truman State University, the history of A.T. Still and the university that he founded.
All of that has this beautiful interplay together.
There’s just a really historically rich environment here.
And I’m really glad to see that we are continuing to do different projects that pay honor to that heritage and help people connect to what’s going on today in our community through the legacy that was started all those years ago.
I serve as a member of the Kirksville Historic Preservation Commission in my capacity as a council member.
And we are always looking to recognize different residential, commercial and industrial properties that are historic in nature.
In fact, we just did a new designation as a historic property under the Kirksville listing for a beautiful home over on Illinois Street, the Evans house, and that was a really great opportunity.
But we’re always looking for different ways to do that.
And one of them that I’m really excited about is a grant funded project that the city of Kirksville is able to work with, where we brought in a firm who did the research on a lot of historic properties, particularly in our historic downtown area.
And they actually created a script based off of the information that they collected.
And I got to do the audio recording for that those audio recordings are going to become part of an app that people can download.
And they can walk around with that in historic Kirksville.
And when they’re in front of one of the properties, that’s part of the project, that narration will go ahead and start to play.
And they can learn about sort of the roots of those particular properties, the people who made an entrepreneurial venture out of them or a different historical effort that happened.
And through these stories, you really get a sense of what Kirksville has meant to this region—to the entire state, to specific fields to specific industries.
I walked away learning some new things, just from recording the audio on that.
So I think even people who have lived here for a very long time, will walk away not just with new knowledge, but with a greater appreciation for the history that really has impacted where they live.

source

East Brunswick NJ Route 18 redevelopment begins – My Central Jersey

EAST BRUNSWICK – Route 18 and the township may never be the same.
Township officials this week celebrated the beginning of work on the long-awaited Vermella East Brunswick, a joint venture of River Development Equities and Russo Development, on Route 18 that will feature more than 1,200 residential units, a transit center and numerous retail, entertainment and hospitality components with amenities and open spaces like dog parks, pedestrian walkways and recreational pavilions.
“I think what you’re going to see is a product that is really second to none,” Mayor Brad Cohen said. “This is quite unique.”
Phase I of the project, which will be on 12.9 acres along the west side of southbound Route 18, north of Lake Avenue and to the east of Renee Road, includes one mixed-use building with about 306 residential rental units in a mix of studio, one-, two- and three-bedroom apartments; 11,322 square feet of retail space; 12,871 square feet of retail/medical office space; 8,375 square feet of restaurant space and another building of about 5,160 square feet of restaurant space.
Cohen said the project is going to be the “marquee type of change that you’re going to see to Route 18.”
“As you come off of the Turnpike, this is the first thing you’re going to see,” he said. “This Phase 1 actually sits topographically a little bit higher than any other part of this whole project. It’s going to stand out. It needs to be something that really starts a process that allows the rest of the highway to see that that’s really what the new standard is.”
Also see:Four years of roadwork is coming to Route 18 in East Brunswick. Here’s what to expect
Also see:East Brunswick’s plan to revitalize Route 18 as ‘entertainment corridor’ gets boost
The mayor said while some say the township needs Wegmans, Whole Foods and high-end retail, those stores won’t come to East Brunswick unless you provide an attractive environment.
“That’s what this is about,” Cohen said. “That’s how we get there.”
This is “a really, really big day for the township because this truly marks what I believe is one of those few times in a town’s history where there’s a generational shift in the way in which the town moves forward,” he said.
The economic environment in the country and East Brunswick is changing, the mayor said, adding some of the commercial properties have been empty for two decades.
“We have to adapt, and part of that is just the cold realization that we are moving to a different type of economy,” Cohen said.
“We need to be able to ride that curve and to take advantage of an opportunity that doesn’t come that many times in a lifetime, and that’s exactly what we have done,” he continued.
Warren Waters, a principal and founding member of River Development Equities, said the development will spark changes all along Route 18.
“This is going to be great,” Waters said. “It is dynamic. The project’s going to be beautiful. This is not only going to look different, smell different, but it’ll be different and cared for because it matters. We will own it for eternity. I think ultimately what this will do is force other property owners, other developers, along Route 18 to work on their properties, to redevelop them and to do other things because they’re going to start to look really sore, old and tired when we’re done doing this.”
Waters said the project was six years in the making.
Earlier:East Brunswick unveils $500 million plan to ‘redevelop, revitalize and reimagine Route 18’
Michael Hughes, executive director of the East Brunswick Redevelopment Agency, said this is “a transformative project for Route 18 and it is a milestone to be celebrated.”
The buildings being demolished have been an eyesore in East Brunswick for as long as he can remember, Hughes said.
The township Planning Board gave final approval for the first phase of the $500 million project on Sept. 14.
Email: [email protected]
Susan Loyer covers Middlesex County and more for MyCentralJersey.com. To get unlimited access to her work, please subscribe or activate your digital account today.

source

AJHS 8th Grader Selected as Top 300 Broadcom Master – starkvillesd.com

Translate
Starkville
Starkville Oktibbeha School District
Armstrong Jr High School 8th grader Anya Rai has been selected as a Top 300 Broadcom Master.  The Broadcom Masters competition is the nation's premier science, technology, engineering and math competition for middle school students.  Anya was selected to compete in the Broadcom Masters after winning the Mississippi Region V Science Fair with her project Analysis of Synthetic and Degradation Pathways of Polyhydroxy Butrate in Cupravidus Necator to Produce Biodegradable Plastics.  Anya was selected out of more than 1,800 middle school students.  She has advanced to the final round where judges will select the Top 30 projects and award over $100,000.  

Anya was recognized for her excellent achievement by the Starkville Oktibbeha School District Board of Trustees during its regular monthly board meeting.  
GET OUR SPARK NEWSLETTER
This site provides information using PDF, visit this link to download the Adobe Acrobat Reader DC software.
Starkville Oktibbeha School District
Through rigorous and relevant learning experiences in every classroom, Starkville Oktibbeha School District is sparking the flame of excellence in our students, preparing them to be college and career ready. #ExpectExcellence
© 2018 Starkville Oktibbeha School District.
We're in this together.
Contact our confidential hotline at 662.320.4640

SEE SOMETHING?

source

Party on the block! – WMBB – mypanhandle.com

Party on the block!  WMBB – mypanhandle.com
source

7 Music Industry Podcasts That Help Keep You in the Loop – Spotify for Artists – artists.spotify.com

As the podcast world continues to boom, it can be a challenge to discover which ones deliver valuable analysis of the ever-changing music industry, and which ones are just a lot of talk. We got you. To help you stay in the loop on the biz, here’s a rundown of seven key pods regularly pumping expertise and ideas into your ears — including our own Co.Lab Sessions and Best Advice.
After the 2016 release of his How To Make It in the New Music Business best-seller, Ari Herstand decided to bring the book to life with a podcast. The New Music Business podcast dives into how the industry works, including monetizing music NFTs, artist management, understanding sync licensing, and more. The podcast has made significant waves in the industry, winning the “Best Music Podcast” Webby award in 2021. Listen Now.
If you’re looking for a straightforward approach to industry advice, Music Industry Blueprint gives unfiltered tips. Host Rick Barker combines his artist development background (he’s Taylor Swift’s former manager) and entrepreneurial skills to help others figure out the complicated business. Created using Spotify’s free Anchor podcast creation platform, MIB offers free episodes that include guests like Blue Avenue Music Group CEO Jenny Powers, trend explainers, and more. MIB also has paid, subscriber-only resources. Listen Now.
On The Business Side of Music podcast, host Bob Bender shares his experiences as a longtime tour manager and festival producer to independent artists and songwriters looking to make sense of the business. Each week, Bender and his guests candidly break down their wins and losses navigating things like recording, copyright, songwriting and catalog. Past conversations have featured veteran promoter Danny Zelisko, songwriter Chad Harvey, and others. Listen Now.
After spending seven years working in music publishing (at Sony Music Publishing and peermusic), supervision and sync in London, Danny Champion launched his Behind the Music Business podcast in 2018 to talk to a cross section of people working in the industry about their jobs and perspective. Also created using Anchor, Behind the Music Business invites UK-based guests like Anara Music Publishing director Deborah Smith and lawyer Dean Marsh to the mic to share insight into their respective roles. Listen Now.
Music Is My Business hopes to lower the hurdles to success in music by offering real-life advice. It’s hosted by Anthony Clint Jr., a music producer who has worked with the likes of Tamar Braxton and has placements in shows like Keeping Up With the Kardashians and MTV’s Catfish. The podcast is like a coaching session as Clint Jr. shares tips on securing TV/film placements, the importance of music licensing and the production business as a whole. Listen Now.
From Big Freedia explaining the importance of taxes to Prince Royce sharing why you need to understand music accounting, our Best Advice podcast is filled with actionable info on how to manage the business side of music direct from the mouths of successful artists. The series of friendly-yet-frank conversations, hosted by Kim Taylor Bennett, gleans wisdom from music makers across genres. Listen Now.
From explaining A&R to exploring merch monetization and brand collaborations, Spotify for Artists own Co.Lab Sessions taps experts from across the industry for in-depth conversations about topics that matter to working artists. Guests have included everyone from Grammy-winners and label execs, to innovative gaming and merch entrepreneurs. Listen Now.
Want to launch your own podcast about music? Get started with Anchor, then check out Music + Talk, which allows you to bring together talk commentary with Spotify’s entire catalog of licensed songs. Plus, be sure to explore Music + Talk ideas for artists and their teams to get inspired.
Spotify for Artists helps you to develop the fanbase you need to reach your goals.

source

Singer-songwriter finds a musical home in Spokane – Bulletin

Some clouds. Low 49F. Winds light and variable..
Some clouds. Low 49F. Winds light and variable.
Updated: October 7, 2022 @ 8:39 pm
Shawn Stratte’s band with fellow musician Lucas Brown, “The Night Mayors”, performs at Zola on Tuesday nights. 
News Editor
Shawn Stratte’s band with fellow musician Lucas Brown, “The Night Mayors”, performs at Zola on Tuesday nights. 
Shawn Stratte never expected a family band to kick-start a lifetime of music, but it did.
Starting his musical journey at age 5 with the piano, Stratte learned from combined efforts and mini lessons from different family members. With his dad leading the band efforts and his older brother having dibs on the guitar, Stratte found his way with the keyboard. 
Focusing on keyboard kept him from giving singing a chance until he tried out for and got into advanced choir in ninth grade at Upper Columbia Academy in Spangle, Washington.
“I had never really sang, I was even nervous to sing in front of my dad,” Stratte said. 
Joining choir allowed him to focus on vocals, helping him find an even greater love for music than before.
Pressure from the people around him kept him from pursuing music out of high school, so he went to college and studied mathematics at Walla Walla Community College (WWCC). While at WWCC, Stratte joined a music group and a vocal jazz choir at Walla Walla University, forcing him to branch out musically. 
“Out of high school I don’t think I had the confidence to even try for music,” Stratte said. “I never thought I could do [music] for a living.”
After two years at WWCC, Stratte transferred to Eastern Washington University and continued his degree in mathematics, keeping music in the back of his mind. When the summer between junior and senior year rolled around and he didn’t have an internship, Stratte decided to apply to Carnival Cruise Line as a singer. 
His decision to pursue a summer gig at Carnival led him into Spokane’s music scene, allowing him to land a job at The Riddler Piano Bar in downtown Spokane before heading to Baltimore, Maryland for the port. 
At Carnival, Stratte was the “piano bar guy,” playing classic piano bar songs like “Don’t Stop Believing” by Journey and “Piano Man” by Billy Joel. 
“They’re great songs, but they’re kind of like cheat codes,” Stratte said. “If you can carry a tune, then you can probably kill it on that song.”
The cruise ship put Stratte out of his comfort zone, forcing him to perform solo, which he had never really done before — six nights a week for four hours a night. Stratte said he learned very quickly what not to do and what tricks kept people engaged in the show. After a couple of beginner mistakes, Stratte got the hang of crowd management, bringing people in and getting them singing along with him.
Stratte played the summers of 2018 and 2019, returning to Carnival this past May after isolation restrictions had been lifted. 
When he returned from Carnival the first time around, Stratte began his job at The Riddler. The owner, Steve Riddler, took him under his wing and nudged Stratte out of his shell. From Riddler, Stratte learned new piano riffs and ways to fill out songs to include bass lines and string instrumentals and how to solo within the songs.
It was at Carnival in 2018 that Stratte found the secret to song-writing perfection, courtesy of a musician on the ship named Johnny. 
“I think he just said, ‘say what’s on your mind,’ or just ‘say what you feel’ and it was a breakthrough for me,” Stratte said. “Ever since I heard that, I was like ‘yeah, that’s all you need.’ I would complicate it too much … With each song I write, I like to think about what has been on my mind lately, even if it isn’t that interesting. I don’t care if it’s relatable, as long as it’s true and on my mind, and it sounds good of course.”
Since then, Stratte has been focusing on his lyricism, setting up shop with his guitar in a quiet area with his phone on airplane mode to craft his lyrics. He fiddles with the melody and lyrics at the same time before focusing on each aspect individually. Then, he heads into production.
Since professionally pursuing music, Stratte has learned a lot about the importance of music production and making his music interesting to keep listeners intrigued. One of the biggest lessons he has learned is being picky with vocals and paying special attention to infliction. 
On Tuesdays, Stratte shares a band at Zola with fellow musician Lucas Brown called “The Night Mayors,” for which Stratte plays keyboard and sings backup vocals. Stratte has been playing with them since Brown invited him to join a year and a half ago, and recently the two have been switching off lead roles. 
“It was so incredible the first time I heard other musicians playing my song,” Stratte said. “It’s just such a cool feeling.” 
Stratte played keyboard and sang backup vocals on Brown’s first full band release, “Everything Means Something Out Here.” According to Brown, the two have collaborated together on a variety of different projects, helping each other grow their respective music careers. 
“I love working with Shawn …” Brown said. “We have collaborated in a lot of different ways, and I worked with him on his original music. He’s a really talented, creative guy and I’ve never heard him play the wrong note.” 
On Sept. 7, Stratte had his first solo concert at Lucky You Lounge for the release of his new extended play (EP), “Forgive You,” complete with a full band. He described his style as pop with a lot of jazz, funk and soul influences. His music varies from synth beats to piano ballads, but his heart is in every song. 
“It was so fun, and it was my music,” Stratte said. “It wasn’t a piano bar sing along, which is also fun, but my music. What I see in the future is more of that. I want to be seen as more of an artist.”
Stratte performs at Zola on Tuesday nights and The Riddler on Fridays and Saturdays.
Sydney Fluker is a news editor. Follow them on Twitter: @sydneymfluker.
News Editor
{{description}}
Email notifications are only sent once a day, and only if there are new matching items.
Staff writer
{{description}}
Email notifications are only sent once a day, and only if there are new matching items.
Staff writer
{{description}}
Email notifications are only sent once a day, and only if there are new matching items.
A&E Editor
{{description}}
Email notifications are only sent once a day, and only if there are new matching items.

source

18 Things To Do In Chicago This Weekend, Including Wine Fest, Donut Crawl, A Día De Los Muertos Mercadito – Block Club Chicago

Become a member
Learn more
Become a member
Learn more
You can celebrate fall, Día de los Muertos, Indigenous Peoples' Day and Oktoberfest at events across the city this weekend.
CHICAGO — There’s plenty to do across the city this weekend: an art and antiques show, a multicultural East meets Middle East concert, a Día de los Muertos celebration in Logan Square, Indigenous Peoples’ Day festivities, neighborhood tours and more.
Here’s a roundup of 18 things to do across Chicago this weekend:
5-10 p.m. Friday, 11 a.m.-10 p.m. Saturday and 11 a.m.-7 p.m. Sunday
Jonquil Park, 1001 W. Wrightwood Ave.
The Lincoln Park Wine Fest returns this weekend for its sixth edition and will feature dozens of wine varietals, live music and vendors selling artisanal items. Tickets are available online and cost $40 for general admission and $80 for VIP passes.
1-2:30 p.m. Saturday
Starts outside the Seminary Co-op bookstore, 5751 S. Woodlawn Ave.
A free walking tour of Hyde Park kicks off this weekend, commemorating the latest edition of the AIA Guide to Chicago, a prime source for local history and architecture. The tour will be around 90 minutes, led by Laurie Peterson and joined by Eric Allix Rogers, a photographer specializing in Chicago’s built environment.
11 a.m.-9 p.m. Saturday and 11 a.m.-8 p.m. Sunday
On Ravenswood Avenue from Warner to Cuyler, on the west side of the train tracks between Begyle Brewing and Dovetail Brewery
This fall celebration hosted by Begyle Brewing and Dovetail Brewery is open to all ages, and you can also bring your dog. There will be live music, food trucks, pop-ups and kids’ activities including balloon artists and coloring. Admission is free, and there is a $5 suggested donation to benefit Lincoln Square food pantry The Friendship Center. Your donation can help provide two weeks of groceries to a senior living alone, or about 50 meals.
6-9 p.m. Thursday, 11 a.m.-8 p.m. Friday, 11 a.m.-6 p.m. Saturday and noon-4 p.m. Sunday
222 W. Merchandise Mart Plaza
This antiques and arts show returns to Merchandise Mart this weekend. It features 50 national and international exhibitors presenting fine antiques, decorative and fine arts from ancient times to the 20th century. Tickets are available for $25 online.
Doors open 6:30 p.m. Friday
South Asia Institute, 1925 S. Michigan Ave.
This concert presented by the South Asia Institute and Intercultural Music Production incorporates cross-cultural sounds and instruments from South Asia, the Middle East and North Africa. Tickets are $25 and $15 for students online.
7:30 p.m. Saturday
Harris Theater, 205 E. Randolph St.
You can enjoy a family-friendly performance in celebration of the Indian holiday festival Diwali at the Harris Theater this weekend. Tickets are available starting at $30 online.
7-9 a.m. Friday
The Bean at Millennium Park, 201 E. Randolph St.
This 2.62-mile donut crawl-meets-marathon hosted by Run for Change starts by “The Bean” and finishes at Stan’s Donuts.
9:30-11 a.m. Saturday
Palmer Square Park, 3000 W. Palmer Blvd.
This family-friendly group bike ride tours Logan Square and Avondale. Riders will meet at the “Bunny Park” playground in the middle of the park and depart at 10 a.m.
11 a.m.-3 p.m. Sunday
Jefferson Memorial Park, 4822 N. Long Ave.
You can shop local, visit a petting zoo, donate or pick up a Halloween costume, decorate pumpkins and more at the Jefferson Park Sunday Market. Costume donations are accepted now through the event at the Jefferson Memorial Park Field House.
3-7 p.m. Saturday
6645 N. Oliphant Ave.
There will be music, games, a sip-n-paint, food classes, raffles and community resources at this free party for autistic people 14 and over, their friends and family. This annual event is hosted by Unique Sweets and Legion of St. Michael LEMC. You can register and donate online here.
Noon Sunday
2614 N. Kedzie Ave.
You can learn all about Día de los Muertos, the Mexican holiday’s origins and evolution at this Logan Square mercadito. This anniversary celebration also features vendors who will have materials to create Day of the Day altars such as flowers and bread.
6:30-10 p.m. Sunday-Monday
Sunday at Logan Square Auditorium, 2539 N. Kedzie Blvd.
Monday at Old Town School of Folk Music, 4544 N. Lincoln Ave.
Sky People Entertainment and the Old Town School of Folk Music are hosting the city’s first Indigenous Peoples’ Day festival this weekend. This two-night event features musical performances and dancing by Indigenous artists, showcasing a variety of Indigenous rock, EDM, hip-hop, Latin fusion and more. Admission is free and donations will be accepted at the doors. You can reserve online for Sunday and Monday.
4-11 p.m. Friday
2000 W. Roscoe St.
Roscoe Street-ery has been taking place every second and fourth weekend since May and is wrapping up at the end of the month. You can shop and dine local at over 40 participating establishments. There will also be activities for all ages, including a kids’ bicycle obstacle course 2-4 p.m. and yoga on the street. You can sign up for yoga, find a business directory and learn more online here.
11 a.m.-5 p.m. Saturday-Sunday
Historic Pullman Exhibit Hall, 11141 S. Cottage Grove Ave.
This 49th annual tour returns this weekend, making it one of Chicago’s oldest continuing tour of homes. You’ll be able to see beautiful homes, select public buildings, exhibit and a video on the history of this landmark district, enjoy music, food and more. Tickets for $17-25 are available online here and in-person, and you can pick them up at the Historic Pullman Exhibit Hall.
11 a.m.-3 p.m. Saturday
Gerber/Hart Library and Archives, 6500 N. Clark St.
You can buy books for as little as $1 for paperbacks and $2 for hardbacks at this annual “spine-tingling” Gerber/Hart fall sale. You can also fill a bag for $15, a box for $25 and purchase DVDs, art books and erotica.
6:30-7:30 p.m. Thursday
North Avenue Beach, 1600 N. DuSable Lake Shore Drive
Light Up the Lakefront returns in-person for the first time since 2019, hosted by Between Friends, an organization working to break the cycle of domestic violence. Attendees will light candles on the beach to mark Domestic Violence Awareness Month and as tribute to all those affected by domestic violence each year. This is a free outdoor event, and ASL and Spanish translation will be provided for all speakers.
Varying times and locations. See the full schedule here.
The Chicago World Music Festival wraps up this weekend, with performances Thursday-Saturday and a grand finale Sunday at Navy Pier.
3:30-7:30 p.m. Saturday
2341 N. Cannon Drive
You can enjoy food, music and thousands of floating lanterns — that you can make and decorate yourself. You can buy tickets online here, starting at $11.99 for kids ages 8-14 and $25.99 for adults; children under age 8 can get in for free but still need tickets.
Subscribe to Block Club Chicago, an independent, 501(c)(3), journalist-run newsroom. Every dime we make funds reporting from Chicago’s neighborhoods.
Click here to support Block Club with a tax-deductible donation. 
Thanks for subscribing to Block Club Chicago, an independent, 501(c)(3), journalist-run newsroom. Every dime we make funds reporting from Chicago’s neighborhoods. Click here to support Block Club with a tax-deductible donation.
Listen to “It’s All Good: A Block Club Chicago Podcast”:
Neighbors are asking for help identifying the man and getting the puppy to a safe home. It's "beyond disturbing and certainty animal cruelty," one neighbor said.
The 9-week-old Pepper is one of two shop cats at Auto Tecx Collision and Repair. He was taken from the business Thursday, a week before he was to be micro-chipped.
A Walgreens representative said the branch was closing at a community meeting Wednesday — but the company said Thursday it has not made any decision regarding the location.
Ald. Byron Sigcho-Lopez and State Rep. Theresa Mah said they will try to halt millions in state and city funding until city leaders make good on their promise to engage the community.

source

Best video editing software for Windows and Mac – TechRadar

Best video editing software for Windows and Mac  TechRadar
source

Lewitt CONNECT 6 USB-C Audio Interface – Gearnews

Lewitt CONNECT 6  ·  Source: Lewitt CONNECT 6
Lewitt has announced CONNECT 6, the manufacturer’s first USB audio interface. Aimed at content creators and musicians, the CONNECT 6 not only boasts a striking exterior design that’ll surely turn heads. It’s also got some very interesting features, including a built-in DSP for flexible routing and onboard effect processing.
Until now, the Austrian company Lewitt was best known for its innovative microphones like the LCT 640 TS, LCT 1040, and LCT 441 FLEX. With CONNECT 6, the manufacturer now sets out to capture a share of the highly competitive market for USB audio interfaces. Which features does CONNECT 6 offer that might give it an edge over the competition?
Lewitt CONNECT 6: Your LEGO figures are going to love it!
The first thing that meets the eye is the interface’s highly unusual design. (One of my colleagues immediately commented: “That’ll make a great base for LEGO figures!”) While it’ll surely turn heads, I can imagine that it might be a bit too extravagant for some users, to put it mildly. In any case, it’s an obvious indication that Lewitt is aiming the CONNECT 6 at gamers, streamers, and content creators, in addition to musicians – similar to the recently announced M-GAME line by M-Audio.
This continues with the connectivity options, where the CONNECT 6 offers a bunch of features clearly geared towards streaming and podcasting applications. The interface has two XLR-1/4” combo inputs for microphones and instruments, each equipped with a preamp that delivers a whopping 72 dB of gain. In addition to this, you can hook up a stereo source to the 1/8” Aux input. There are three USB-C connectors in total – one for the computer, one for a phone, tablet, or second computer, and a third one for power – the CONNECT 6 charges mobile devices while connected. According to Lewitt, it’s possible to send and receive audio back and forth between your computer and phone. CONNECT 6 supports both iOS and Android devices.
In terms of outputs, you get two balanced speaker outputs (1/4”), two independent headphone outputs, and one 1/8” stereo speaker output.
Plenty of connectivity
One thing to consider is the interface’s complete lack of hardware controls aside from one large, clickable knob. There are no dedicated physical knobs for the preamps and headphone outputs, and no buttons for activating phantom power or sending input sources to the monitor mix. While you can use the big push knob to set the preamp gain and headphone volume, that might not suit everybody’s workflow.
However, the routing options are really interesting, and again, they’re designed with streaming and podcasting in mind. The built-in DSP runs a software mixer that lets you combine microphones with audio from a computer, mobile device, or another input. In addition to three virtual stereo channels, there’s loopback channel for capturing audio from a Zoom call, game, or similar computer-based sources. You can create two independent audio mixes, e.g. one for monitoring and a different one for sending to a streaming software. Everything’s controlled using the included Control Center software.
The CONNECT 6 features a built-in DSP for routing and effects
But that’s not all, because the DSP can also process effects. The CONNECT 6 comes with three zero-latency DSP effects (compressor, expander, EQ) that relieve your computer’s CPU of these duties.
All of this combined makes for a very interesting first foray into the world of audio interfaces by Lewitt. With its highly flexible routing options, the CONNECT 6 looks like a great choice for anyone involved in streaming, gaming, or podcasting. And some of its features could prove to be very useful for music production, as well.
Included effects: compressor, expander, equalizer
The Lewitt CONNECT 6 will be available for €299 (MSRP) in about two weeks.
By loading the video, you agree to YouTube’s privacy policy.
Learn more
Load video

By loading the video, you agree to YouTube’s privacy policy.
Learn more
Load video

* This post contains affiliate links and/or widgets. When you buy a product via our affiliate partner, we receive a small commission that helps support what we do. Don’t worry, you pay the same price. Thanks for your support!
How do you like this post?
I’m having a great experience with the LEWITT microphones. I sold my AKG C414 after trying their LCT 440 which is one of the best mic I ever tried. Regarding the interface, not convinced by the design. Your friend made a good description for it 😂 .The gain output is quite generous for an entry level interface and the connection is basic but quite versatile ( no MIDI ports though). DSP is a really handy feature for live purpose but their is no mention of a reverb which would be neat for vocal tracking. 2 headphones output is also a nice add on. All in one this interface seems to cover a lot of ground for the price.
Looking forward for a review.
Thanks for sharing this.
sorry, it’s ugly.
Your email address will not be published.





· you guys need to make the mega fm eurorack format
· As I’m also just about to turn 50, this seems like a perfect suggestion to the wife, as to what to get me for my birthday (naturally I’m going to ‘ask’ for a Jupiter 8, but I know what …
· Good idea, let me pitch it to him next time I see him. Bonamassa Epiphone LP Uke, in 2022 Nerdvilleburst etc, collect them all!

source

EQ Office Releases 2021 ESG Report – businesswire.com

Highlights EQ’s efforts to regenerate urban spaces, preserve local culture and bring humanity into workplaces
CHICAGO–()–EQ Office, a leader in creating inspiring workplace destinations, today released its second annual Environmental, Social and Governance (ESG) Report highlighting the company’s progress on its commitment to preserving local culture, regenerating urban spaces and bringing humanity into the workplace.

“At EQ, our business goes beyond four walls and is rooted in putting people first,” said Charlie Hobey, Managing Director and interim head of ESG at EQ Office. “Every year, it is a central priority to enhance our efforts to inspire the next generation of talent, celebrate diversity, cultivate an inclusive culture and build thriving, eco-friendly communities around the country.”
EQ Office launched its ESG program, EQ Impact, in 2021 to provide access and opportunities for career growth and talent development. Highlights from EQ’s 2021 ESG report include:
1. Social Impact: Preserving local culture
EQ Office expanded its national partnership with YouthBuild USA. Through the partnership, EQ seeks to expand job training, mentorship, and job placement to opportunity youth — young adults between the ages of 16 and 24 who are neither in school nor employed — who want a career in real estate or construction-related fields.
EQ Office launched mentorship-to-internship programs in eight cities and supported the transformation of the YouthBuild center in Compton, California into a space where generations can learn and grow. Last year, EQ Office and more than 30 vendors renovated and refurbished Compton YouthBuild, donating 5,516 hours and over $1.2 million in value. The company plans to redevelop another YouthBuild property in 2022.
2. Environmental Impact: Regenerating urban spaces
EQ Office is committed to creating sustainable spaces for tenants, team members, partners and the greater community. In 2021, the company invested $27 million in environmental capital improvements and evaluated each potential investment for its ability to enhance efficiencies, re-use local materials and lower operating costs.
The company’s prioritization of responsible energy, water and waste management and procurement has led to 42 buildings achieving green certifications like Energy Star, LEED or BOMA 360 and 60% of its buildings offering composting. EQ also reduced electricity consumption by 10% across properties and doubled its procurement of clean energy to power 69% of buildings in its portfolio.
3. Governance Impact: Bringing humanity into workplaces
In 2021, over 80% of the company’s vendor searches met Diversity, Equity and Inclusion (DEI) standards. Additionally, EQ Office’s DEI Task Force developed a library of educational resources, coordinated multiple events that celebrate diverse heritages and planned a series of DEI workshops to offer all EQ employees in 2022.
For more information on EQ Impact’s ESG program, view the company’s 2nd annual ESG Report here, along with the Executive Summary Report here.
About EQ Office
EQ focuses on the experience of its 20 million square feet – how space feels, activates and performs to amplify the human experience. We’re proud to work hand-in-hand with more than 1,500 customers of all sizes, from Fortune 100 companies to emerging startups, to bring humanity back to the workplace. Our diverse team of more than 200 professionals is responsible for creating inspired office environments in major cities across the country including Chicago, New York, Los Angeles, San Francisco and Seattle. As a U.S. office portfolio company wholly owned by Blackstone’s real estate funds, we have the resources to lead the changes happening in work space. Explore your space for greatness at www.eqoffice.com.
About YouthBuild USA
With love and respect, YouthBuild partners with opportunity youth to build the skillsets and mindsets that lead to lifelong learning, livelihood, and leadership. At more than 275 YouthBuild programs across the United States and around the world, students reclaim their education, gain job skills, and become leaders in their communities. To date, YouthBuild has partnered with more than 180,000 young people to dedicate over 50 million hours of service benefitting urban, rural, and tribal communities. YouthBuild strives to create a world where all young people are seen for their potential, and power to transform themselves and their communities. YouthBuild USA — the support center for the YouthBuild movement — strengthens YouthBuild programs through technical assistance, leadership development, innovative program enhancements, and advocacy. YouthBuild programs located outside of the United States are supported by YouthBuild USA’s international division, YouthBuild International. For more information about the YouthBuild movement, YouthBuild USA, and YouthBuild International, visit YouthBuild.org.
Elliot Golan
Allison+Partners
[email protected]
Elliot Golan
Allison+Partners
[email protected]

source

Lizzo puts the music first during SiriusXM Small Stage show at Saint Andrew’s – Oakland Press

E-Edition
Sign up for email newsletters

Sign up for email newsletters
E-Edition
“I’m a rock girl,” Lizzo declared to a packed house on Wednesday night, Oct. 5, at Detroit’s Saint Andrew’s Hall. “I’m gonna give you a rock show!”
She was certainly in the right place for it.
With her full Special Tour production making a stop Thursday night, Oct. 6, at Little Caesars Arena, the Grammy Award-winner and Detroit native stripped things down for one of SiriusXM’s Small Stage Series concerts. (The service will broadcast the concert at 9 p.m. Wednesday, Oct. 12 on SiriusXMHits (Channel 2) and on the SXM App.) The 13-song, 55-minute show didn’t try to be the lavish production she’s on the road with now; Lizzo even wore just one outfit all night, an all-black jacket and tank top ensemble with fringed leather bellbottoms. Instead the show allowed the vocalist and her band (four instrumentalists, a DJ, two dancers and two backing vocalists) an opportunity to focus on the potency of Lizzo’s music without the high-fashion trappings of her imaging — and was all the more special for that.
It was truly a family and friends night with many of Lizzo’s Detroit relatives (she moved to Houston when she was 10 before launching her career in Minneapolis just over a decade ago.) in attendance along with SiriusXM subscribers, fan club members and invited guests. Saint Andrew’s was hand-picked by Lizzo (real name Melissa Jefferson), who attended concerts there during return visits to Detroit and also played there back in May of 2019 — just two months before her co-headlining spot on that year’s Mo Pop Festival.
She barely played the home town card, however. Her comments were mostly quick, perfunctory and good-humored, though at one point early she complained about some sinus fluid and declared “I’m here only for y’all.” Instead Lizzo let her repertoire of empowering anthems — blending pop, soul, funk and hip-hop — do the talking, coming out strong with an energetic coupling of “The Sign” and “2 Be Loved (Am I Ready),” the dancers joining on the latter. The choreography throughout the night was a bit more contained than it would be on an arena stage but still fluid, with a modicum of twerking thrown in.
Lizzo and company chose well from her tour set list, pushing out a healthy sampling (six tracks) from her latest album, “Special,” along with a cover of Lauryn Hill’s “Doo Wop (That Thing)” and a sampling of her biggest hits, with Cardi B’s present on tape for her “Rumors” rap. Lizzo hit the big notes during emotive renditions of “Special” and the bluesy “Cuz I Love You,” while the pairing of “Like a Girl” and “Birthday Girl” allowed her to send out birthday wishes to fans in the crowd — and, later, to one contest winner who was brought on stage for a selfie.
And, of course, Lizzo pulled her flute out for brief breaks during “Truth Hurts” and the show-closing pair of “Juice” and “About Damn Time,” both roof-raising singalongs that that truly captured the energy of a large arena in a small space.
There’s no doubt Lizzo will dazzle with all the accoutrements that will be part of her Little Caesar’s show. But Wednesday’s show was a reminder that she can be just as, if not more, impactful without all of that.
Sign up for email newsletters
Copyright © 2022 MediaNews Group

source

Lagos begins training of 200 youths in filmmaking, music production – TheCable Lifestyle –

The Lagos state ministry of tourism, arts, and culture has commenced the training of about 200 young talents in the creative industry.
In August, the ministry, in collaboration with The Temple Company, launched Gidi Creative Centre, a platform to train and equip young talents in the creative industry.
The company kicked off the programme with an orientation ceremony on Tuesday at the Tayo Aderinokun Lecture Theatre, University of Lagos (UNILAG).
Idris Olorunnibe, the director of The Temple Company, said 200 youths out of 1000 applicants have been admitted into the academy.
He also disclosed that additional 300 youths will be admitted into the academy’s masterclass.
Olorunnibe added that youths with creative ideas will get access to funds after training to bring their ideas to life.
“After the training, there’s an opportunity for beneficiaries as individuals or group to pitch and access funding from Lagos State Employment Trust Fund (LSETF),” he said.
“They can access grants or single digit loans to fund production for sale to content buyers as a way earning income for themselves. There will be other opportunity for us to train more people because there’s a major deficit in content production.”
According to Winifred Okpapi, head of strategy, Arts & Talent Affairs, the participants will also be trained in leadership and entrepreneurship.
On her part, Adebukola Agbaminoja, the executive secretary of the Film and Video Censors Board, said: “The Lagos State government through the Lagos Creative Industry initiative has developed a platform through which creative talents from different local government in the state can participate in free-tuition training which is being facilitated by different film academies in the state. Presently, we are partnering with Gidi Creative Centre to train 200 beneficiaries in various capacities.
“Our previous beneficiaries have been doing well and this is what is propelling us to do more trainings. Our public-private partnership model with stakeholders for capacity-development has been working. We have previously partner with the likes of Ebonylife Creative Academy, Del-York Creative Academy and Africa Film Academy. The students have emerged from these trainings to screen and showcase within and outside Nigeria, these are verifiable indices and this is why we are encouraged to do more.”
The creative sector initiative seeks to empower the youth across 10 skill areas filmmaking, creative writing, animation 101, audio engineering and music production, graphics design, multimedia design, film and screen production design, project management for creative professionals, fashion design, and media studies.
Your email address will not be published. Required fields are marked *







© 2021 ALL RIGHTS RESERVED – THECABLE NEWSPAPER

source

Todd Coleman releases EP of music for cello – Today at Elon

By Todd Coleman, faculty
October 6, 2022
Coleman, associate professor of music, has released an EP of music for cello, featuring cellist Florent Renard-Payen.
Associate Professor of Music Todd Coleman has released a new EP featuring recordings of three of his chamber music compositions for cello, piano and electronics, performed by French-born American cellist Florent Renard-Payen.
The three works on the album were written between 1995 and 2005, spanning the decade of transition from an undergraduate and graduate student, to assistant professor of music at Grinnell College.
“Undertones” was written for cello and piano and first premiered in 1995 while Coleman was an undergraduate student at Brigham Young University. “Reflections” was written in 1998 for violin, and then transcribed in 2004 for cello and prepared piano (which uses various items such as screws and rubber stoppers placed inside the piano, wedged in between some of the strings to change their sound). “Exquisite Corpse” was written in 2004 for cello, piano, and prerecorded electronic and acoustic sounds, with projected 3D sound and layered video projection.
Renard-Payen was the featured cello soloist on all three recordings, with Coleman playing the prepared piano on “Reflections,” and the piano and all other electronic instruments on “Exquisite Corpse.” Patrice Ewoldt played piano on the recording of “Undertones.”
The album is available on all major streaming music platforms. A video of “Exquisite Corpse” can be viewed on YouTube.
Coleman teaches courses in music composition, orchestration, and recording studio techniques at Elon and is the founding coordinator of the Music Production & Recording Arts degree program at the university.
Arts & Culture Faculty & Staff

Students learned ensemble devising methods in the creation of this spooky play.
The service organization, which is the collegiate branch of the Kiwanis International family, was chartered at Elon seven years ago.
Student Union Board announces Tai Verdes to headline fall concert, Wednesday, Nov. 2, 2022, at 8 p.m. in the Schar Center.
Families and loved ones visited Elon’s campus for a variety of events during Family Weekend 2022.
Get more Elon news delivered to your inbox.


Loading
© 2022 Elon University | All Rights Reserved

source

The Master Plan for Hensley Field's Redevelopment Is Here – D Magazine

Hensley Field, 738 acres near the city’s western border with Grand Prairie, has for more than two decades been where the city puts the things it does not know what to do with. It’s housed over a thousand old police cars, a dog whose owner was infected with Ebola, and the old statue of Robert E. Lee that was removed from Oak Lawn Park.
On Thursday, the City Plan Commission will be briefed on a master plan for Hensley Field that was developed by city staff and Austin-based McCann Adams Studio. The latter was hired by the city to plot the area’s mixed use future; it previously transformed Austin’s former Robert Mueller Municipal Airport into a 700-acre community development.
The city of Dallas has wanted to develop the land since the Base Closure and Realignment Act of 1990 formally ended all U.S. Navy operations there. Today, Hensley Field falls in a designated Opportunity Zone, part of a federal program that offers tax incentives to developers in working in specific neighborhoods identified by the state.
The draft master plan is 59 pages of ambitious goal setting for a lot of land that may still have a lot of secrets. The Navy’s operation left toxic waste in the soil that must be remediated. It was once home to indigenous tribes like the Caddo, Comanche, Cherokee and Wichita, and the city’s re-use and redevelopment plan discusses the potential for discovering artifacts related to those Native Americans. There are also historic structures and a historic cemetery on the site.
It’s an ambitious draft plan that envisions a whole new neighborhood sprouting from nothing.
It calls for a walkable, mixed use community with 6,800 residential units, interconnected networks of open spaces, and a strong orientation to Mountain Creek Lake that would include a marina and waterfront trails. It would also link to transit options that do not currently exist and would offer a “40-acre Innovation Village on the Runway Peninsula” that would embrace the use of renewable energy sources and sustainability best practices.
In a September 19 memo from McCann Adams to city staff, a list of edits and additions to the final Hensley Field Master Plan give a further glimpse into what that presentation to the CPC will look like, including references to the city’s recently-adopted Racial Equity Plan. 
At least 20 percent of all units will be priced for purchase for households earning 80 percent of the adjusted median income or below or for rent for households earning 60 percent of the adjusted median income. An additional 10 percent of all homes will be targeted for those earning between 81 and 120 percent of AMI. 
The memo also discusses the process the city will follow to select a master developer, but that will likely not come up in the CPC briefing, since that body is only responsible for land use and zoning.
The city’s hopes for development have always run up against one big thing: The land was contaminated by toxic waste, including lead, chlorinated volatile organic compounds, pesticides, petroleum hydrocarbons, and per- and polyfluroalkyl substances, or PFAS, which is left behind by firefighting foam and was found in the soil and groundwater at Hensley Field.
In 2017, former Assistant City Manager Jill Jordan warned the City Council that the Navy was woefully behind and would likely need an extension of its 15-year deadline, which was up in 2017.
According to the city’s more recent re-use and redevelopment plan for Hensley Field, some of those contaminants have been remediated to the satisfaction of the Texas Commission on Environmental Quality. Others, like those PFAs, are still a work-in-progress. 
“The Texas Commission on Environmental Quality has cleared the site for all of the other contaminants,” Jim Adams of McCann Adams told D last year. “It has not cleared it for PFAS because the science is still not settled on how this chemical is to be mitigated, and we have not yet seen exactly where it is relative to the soil and groundwater.”
The city sued the Navy in 2002 to get the federal government to clean up its mess. A report earlier this year from the U.S. House of Representatives Committee on Appropriations also took the Navy to task.
“The committee is concerned that 23 years after the closure of Naval Air Station Dallas (Hensley Field) in BRAC in 1998, the Department of the Navy has not yet completed environmental remediation of the former Naval Air Station Dallas,” the report said.
Two years ago when the city hired McCann Adams, Councilman Casey Thomas called the development a “historical opportunity.” His southern Dallas colleague on the horseshoe, Tennell Atkins, also saw the promise, even before a master plan was produced.
“This is going to spur our tax value, with employees, with jobs. But we’ve got to make sure we stay focused,” he said.
If the Navy and the city can ensure that the site is cleaned up and is safe, it will be something Dallas doesn’t have a lot of: brand new housing in a new community.
Attractions
Bars and Clubs
Shops
Restaurants
750 North St.Paul St. Suite 2100 Dallas, Texas 75201
Tel: 214.939.3636   Fax: 214.748.4579

source

Light-field microscopy with correlated beams for high-resolution volumetric imaging | Scientific Reports – Nature.com

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 16823 (2022)
Metrics details
Light-field microscopy represents a promising solution for microscopic volumetric imaging, thanks to its capability to encode information on multiple planes in a single acquisition. This is achieved through its peculiar simultaneous capture of information on light spatial distribution and propagation direction. However, state-of-the-art light-field microscopes suffer from a detrimental loss of spatial resolution compared to standard microscopes. In this article, we experimentally demonstrate the working principle of a new scheme, called Correlation Light-field Microscopy (CLM), where the correlation between two light beams is exploited to achieve volumetric imaging with a resolution that is only limited by diffraction. In CLM, a correlation image is obtained by measuring intensity correlations between a large number of pairs of ultra-short frames; each pair of frames is illuminated by the two correlated beams, and is exposed for a time comparable with the source coherence time. We experimentally show the capability of CLM to recover the information contained in out-of-focus planes within three-dimensional test targets and biomedical phantoms. In particular, we demonstrate the improvement of the depth of field enabled by CLM with respect to a conventional microscope characterized by the same resolution. Moreover, the multiple perspectives contained in a single correlation image enable reconstructing over 50 distinguishable transverse planes within a 1 mm3 sample.
Rapid imaging of three dimensional samples at the diffraction limit is a long-standing challenge of microscopy1. Many attempts are being made to address the need for rapid imaging of large volumes, with acquisition speed sufficient to analyze dynamic biological processes, all leading to different kinds of tradeoff. Progresses in this field include depth focal scanning with tunable lenses2,3, light-sheet illumination4, also employing non-diffracting beams5,6,7,8,9,10, fast STED11, fast two-photon microscopy12, and multi-focus multiplexing13. Software techniques such as compressive sensing and computational microscopy14 are also employed to improve performances. In this perspective, light-field microscopy is among the most promising techniques. By detecting both the spatial distribution and the propagation direction of light, in a single exposure, light-field imaging has introduced the possibility to refocus out-of-focus parts of three-dimensional samples, in post-processing. The depth of field (DOF) within the imaged volume can thus be extended by stacking refocused planes at different distances15,16,17,18,19,20. However, in its traditional implementation, light-field imaging is affected by the fundamental barrier imposed by the resolution versus DOF compromise. In the microscopic domain, this tradeoff is particularly suboptimal, since the required high resolution strongly limits the DOF, making it necessary to perform multiple scanning to characterize a thick sample21. In microscopy applications, light-field microscopy could offer a solution to the bottlenecks of long acquisition times, typical of scanning approaches, and the unbearably large amount of data, typical of multi-focus multiplexing. However, its widespread application has been stifled by the degraded resolution, far away from the diffraction limit16,18. Nevertheless, fostered by the development of image analysis tools and deconvolution algorithms that provide a partial recovery of resolution22,23,24, light-field imaging has shown its potential in neuroscience applications, where it was employed to analyze firing neurons in large areas25. A miniaturized version of a light-field microscope was also recently employed to enable microscopy in freely moving mice26.
In this article, we provide the experimental demonstration of a novel method to perform light-field microscopy with diffraction-limited resolution, discussing its realization and testbed applications. The new technique, capable of beating the classical microscopy limits by exploiting the statistical properties of light27,28,29,30,31,32, employs the working principle of Correlation Plenoptic Imaging (CPI)33,34,35,36,37,38, in which light-field imaging is performed at the diffraction limit by measuring correlations between intensity fluctuations at two disjoint detectors39,40,41,42,43. Previous CPI architectures were limited to bright-field operation relying on mask objects. Here, we design a CPI architecture suitable for different microscopy modalities (fluorescence, polarization, dark-field) that are critical for biological applications. To this end, the sample is illuminated with the whole light beam from a chaotic light source44, rather than by just one beam out of a correlated beam pair33,36,37. This enables imaging self-emitting, scattering and diffusive samples, as well as performing birefringent imaging, without sacrificing the retrieved correlation. Further advantages of the proposed Correlation Light-field Microscopy (CLM) over previous ones are the speed-up of the image acquisition by over one order of magnitude, and the capability of monitoring the sample through conventional (i.e., intensity-based) diffraction-limited microscopy.
The comparison reported in Table 1 clarifies the expected theoretical improvements offered by CLM, in terms of both resolution and DOF44, with respect to both standard microscopy and conventional light-field microscopy46. The first column highlights the diffraction-limited imaging capability that CLM shares with conventional microscopy, as opposed to the sacrificed image resolution of conventional light-field imaging. The factor (N_u) that quantifies the resolution loss of conventional light-field imaging is defined by the number of resolution cells, per side, dedicated to directional information, and is proportional to the DOF improvement. The second and third columns of the table report the DOF of the three methods, respectively, for object details at the resolution limit and object details of arbitrary size. In light-field imaging, the latter represents the refocusing range, while the former determines the axial resolution in the focused plane. In conventional light-field microscopy, increasing the refocusing range (i.e., choosing large values of (N_u)) entails a proportional loss of transverse resolution, and an even more detrimental loss of axial resolution (proportional to (N_u^2)); this generally limits (N_u) to values smaller than 10. Furthermore, for object details larger than the resolution limit, both the DOF of standard microscopy and the refocusing range of conventional light-field microscopy scale linearly with the size of the object details; this is due to the “circle of confusion” generated by the finite numerical aperture of the imaging system. In CLM, instead, the refocusing range scales quadratically with the size of object details, and is only limited by diffraction at the object (see Refs. 33,37,44 for a detailed discussion; specifically, the DOF extension for CLM derives from Eq. (23) of Ref. 44). These are key features in ensuring the unique refocusing advantage of CLM. The fourth column represents the axial resolution of the three techniques, as defined by the circle of confusion (see “Materials and methods” section for details). The ratio between the third and the fourth columns can be regarded as the number of independent axial planes that each technique is capable of providing: The axial resolution is the same for all three imaging methods, but the scaling of the DOF with the square of the object resolution a, in CLM, implies a linear scaling of the number of independent axial planes with a; on the contrary, in standard light-field, the number of independent axial planes is fixed by (N_u), which is generally significantly smaller than (3.3 mathrm {NA}_0 a/lambda). The last column of Table 1 also indicates that the refocusing range of both light-field microscopes is strictly related with the viewpoint multiplicity, defined as the number of available viewpoints, per side, on the three-dimensional sample: In all the considered imaging modalities, the viewpoint multiplicity is proportional to the aforementioned number of independent axial planes that can be refocused, given the size of the details of interest. In sharp contrast with conventional light-field microscopy, the viewpoint multiplicity of CLM can be even one order of magnitude larger than in conventional light-field imaging, without the diffraction-limited resolution to be affected; this is especially true for imaging systems with a large numerical aperture and for refocusing far away from the focused plane (i.e., for large values of object details a). Most important, the DOF extension capability of CLM is independent on the numerical aperture of the imaging systems (see “Materials and methods” for details); a large numerical aperture can thus be chosen for maximizing the volumetric resolution without affecting the DOF. This is very different from conventional light-field microscopy, where the numerical aperture and (N_u) need to be properly chosen to achieve an acceptable compromise of resolution and DOF.
The paper is organized as follows. In the “Results” section, we outline the theoretical basis of the method and show the experimental results. In the “Discussion” section, we discuss the results, their impact on state of the art, and the possibilities of further improvement. In the “Materials and methods” section, we provide a detailed description of the experimental setup and on the methods to extract relevant information from correlation measurements.
The correlation light-field microscope, schematically represented in Fig. 1, is based on a conventional microscope made of an objective lens (O) and a tube lens (T) to reproduce the image of the sample on a high resolution sensor array (detector (mathrm {D}_a)); this microscope can properly reconstruct only the slice of the three-dimensional object falling within its DOF. The capability of CLM to refocus out-of-focus parts of the three-dimensional sample comes from its ability to also gain directional information about light coming from the sample. In our architecture, this is done by means of the beam splitter (BS) that reflects a fraction of light emerging from the objective lens toward an additional lens (L), which images the objective lens on a second high resolution sensor array (detector (mathrm {D}_b)). Further details on the experimental setup are reported in the “Materials and methods” section.
Schematic representation of light-field microscopy with correlated beams. Light from the sample (green pyramid and yellow parallelepiped) is split in two optical paths by a beam splitter (BS), placed after the objective lens (O). The microscope can image only the part of the sample which is at focus (green), while the part outside the DOF is blurred (yellow). Along the transmitted path, the tube lens (T) focuses on detector (mathrm {D}_a) (blue) the 3D sample, with a DOF defined by the numerical aperture of the objective. Along the reflected path of the BS, the objective lens is imaged on detector (mathrm {D}_b) (magenta) by means of an additional lens (L). The intensity patterns registered by the two array detectors, in a collection of N frames, are processed by a computer to reconstruct the correlation function (Eq. (1)) encoding three-dimensional plenoptic information on the sample. All experimental results presented throughout the paper have been obtained by employing this setup.
The three-dimensional sample is a chaotic light emitter or, alternatively, a diffusive, transmissive, or reflective sample illuminated by an external chaotic light source. The chaotic nature of light enables light-field imaging thanks to the rich information encoded in correlations between intensity fluctuations. In fact, the intensity retrieved by pixels simultaneously illuminated on the two disjoint detectors (mathrm {D}_a) and (mathrm {D}_b) is employed in CLM to evaluate the correlation function
where (langle dots rangle) is the average over the source statistics, (I_{a}(varvec{rho }_{a})) and (I_{b}(varvec{rho }_{b})) are the intensities at the transverse positions (varvec{rho }_a) and (varvec{rho }_b) on detectors (mathrm {D}_a) and (mathrm {D}_b), within the same frame, respectively, and (Delta I_{j} (varvec{rho }_{j}) = I_{j}(varvec{rho }_{j}) – langle I_{j} (varvec{rho }_{j}) rangle), (j=a,b). The statistical reconstruction of the correlation function requires, under the hypotheses of a stationary and ergodic source, to collect a set of N independent frames. In the best-case scenario, the exposure time of each frame is matched with the coherence time of the source.
The light-field imaging capability of CLM explicitly emerges when considering the geometrical optics limit of the above correlation function, which reads44,45
where (F(varvec{rho }_s)) is the intensity profile of light from the sample, (P(varvec{rho }_O)) is the intensity transmission function of the objective, f is the distance from the objective of the generic plane within the three-dimensional object, (f_T) is the focal length of the tube lens, and (M_L) is the magnification of the image of the objective lens retrieved by (mathrm {D}_b). When the plane of interest is on focus (i.e., (f=f_O), with (f_O) the focal length of the objective), the correlation simply gives a focused image identical to the one retrieved by detector (mathrm {D}_a). However, as shown in Fig. 2, points of the three-dimensional samples that are out-of-focus (i.e., they lie in planes at a distance (f ne f_O) from the objective) are seen as shifted, and their displacement depends on the specific pixel (varvec{rho }_b) chosen on sensor (mathrm {D}_b), corresponding to the point (varvec{rho }_O=-varvec{rho }_b/M_{L}) on the objective. In other words, for three-dimensional samples that are thicker than the natural DOF of the microscope, different values of (varvec{rho }_b) correspond to different choices of the point of view on the sample: The correlation function in Eq. (1) has the form of a four-dimensional array, characterized by both detector coordinates ((x_a, y_a, x_b, y_b)), encoding all the spatial and angular information needed for refocusing and multi-perspective image. By fixing the coordinates ((x_b,y_b)) of the 4D array, one makes a “slice” of the correlation function, which corresponds to selecting an image of the sample from a chosen viewpoint on the objective lens. This property enables to detect the position of sample details, in three dimensions, and to highlight hidden parts of the sample. The refocused image of a sample plane placed at an arbitrary distance f from the objective can be obtained by properly stacking and summing such different perspectives44,45:
with (M=f_T/f_O) being the natural microscope magnification. The refocusing procedure increases significantly the signal-to-noise ratio (SNR) with respect to the one characterizing the single perspective associated with (varvec{rho }_b). Notice that the technique can be generalized to the case of samples with axially varying diffraction index, upon replacing physical distances with optical distances. Moreover, reconstruction of the correlation function was proved to be robust against the presence of turbulence and scattering surrounding the sample, within a limit distance defined by the emitted light wavelength and transverse coherence44.
Schematic representation of the different points of view on the 3D sample that the correlation function (Gamma (varvec{rho }_a,varvec{rho }_b)) incorporate (Eq. (2)); here, (varvec{rho }_i=(x_i, y_i)), (i=a,b). A thick sample is represented through a (yellow) circle and a (red) arrow placed at distances f and (f^{prime}), respectively, from the objective lens. These two details can appear superposed (upper panel on the right) or well separated (lower panel on the right) depending on the specific transverse coordinate (varvec{rho }_b) chosen on detector (mathrm {D}_b), that corresponds to a point (-varvec{rho }_b/M_L) on the objective lens.
Before moving on to the experimental demonstration of CLM, let us spend a few words on the advantages offered by the capability of CLM to collect a large number of viewpoints, as enabled by the large objective plane on which perspectives can be selected, and by the consequent wide angle from which the sample can be observed. First, refocusing shares with 3D imaging the close connection between maximum observation angles and achievable DOF. Second, the higher the number of points of view that are superimposed to obtain the refocused image (see the integration over (rho _b) in Eq. (3)), the more effective will be both the enhancement of features on the plane of interest and the suppression of contributions from neighboring planes, as well known in 3D imaging. Moreover, superimposing a large number of perspectives to form the final image is advantageous in terms of noise reduction. Indeed, when points of view with statistically independent noise are summed, the process results in a point-wise increase of the signal-to-noise ratio that is proportional to the square root of the number of contributions.
The refocusing and depth mapping capability of CLM has preliminarly been tested with a simple and controllable three-dimensional object, made of two planar resolution targets (named (3mathrm {D}_1) and (3mathrm {D}_2)) placed at two different distances from the objective lens, well outside its natural DOF. Data have been acquired by focusing the correlation light-field microscope onto a plane that did not contain neither one of the two test targets. Correlation measurements, combined with Eq. (3), has been employed to refocus the two test targets, separately, starting from this dataset. The illuminated parts of both targets contain triple slits with center-to-center distance (d = 49.6,upmu mathrm {m}) and slit width (a=d/2); the overall linear field of view (FOV) is (0.54,mathrm {mm}). The test targets are placed at a distance of (2.5, mathrm {mm}) from each other (i.e. (f_{text {3D}_1} – f_O = -1250,mathrm {upmu m}) and (f_{text {3D}_2}-f_O = 1250,mathrm {upmu m}), where (f_O) is the focal length of the objective lens), which is 6 times larger than the natural DOF of the microscope at the given size of the sample details (i.e., the circle of confusion, see Table 1). The reported results have been obtained by evaluating the correlation function over (N=5times 10^3) acquired frames; we report in the Supplementary Information further details on SNR variation with the number of collected frames.
The improvement of CLM over standard microscopy can be observed in Fig. 3a, where we report the resolution-versus-DOF compromise in the two microscopes. In particular, the curves indicate the resolution limits of CLM and a standard microscope (SM) with the same numerical aperture, as a function of the distance from the objective focal plane. The resolution limit is defined in both cases as the value d of the center-to-center distance between two slits of width (a=d/2), such that their images can be discriminated at 10% visibility; such a definition generalizes the Rayleigh criterion for resolution to out-of-focus images. For a fixed slit separation d (vertical axis), one can identify the longitudinal range (f-f_O) (horizontal axis) where the images of the two slits can be discriminated, based on our theoretical results. Points labeled from A to E and from A’ to D’ in Fig. 3a were experimentally investigated to demonstrate the agreement of the experimental results with the theoretical prediction of the resolution and DOF limits. We explored the range between (-1) mm and (+1) mm along the optical axis, in steps of (250 upmu)m, by employing different triple-slit masks of a planar resolution test target, characterized by center-to-center distances ranging from (44, upmu mathrm {m}) (A and A’) to (4, upmu mathrm {m}) (E). In particular, point E is close to the diffraction limit of a standard microscope and shows that CLM is capable of the same resolution at focus. The experimental validation of the CLM refocusing capability for the cases A and D’ is reported in Fig. 3b; the refocused images obtained in all the other cases are reported for completeness in the Supplementary Information. The red points in Fig. 3a identify the parameters of the resolution targets (3mathrm {D}_1) and (3mathrm {D}_2) that compose our three-dimensional test object. The successful experimental refocusing of both targets, reported in Fig. 3c, demonstrates that CLM enables achieving a 6 times larger DOF than standard microscopy, at the given resolution, or, alternatively, a 6 time better resolution, at the given DOF. The leftmost panel reports for comparison the standard microscope image of the three-dimensional test object, in which both target planes are clearly out of focus and none of the triple-slit groups can be recognized. Remarkably, the sets of triple slits placed at (f_{text {3D}_2}-f_O=1250,upmu mathrm {m}) (i.e., the object placed farthest from the objective) are still perfectly resolved. This means that the resolution achieved on farther planes is not heavily influenced by the presence of other details placed along the optical path, despite the substantial spatial filtering that they perform.
Panel (a) compares the resolution versus DOF compromise in a standard microscope (SM) and in CLM, with a numerical aperture (mathrm {NA}_0=0.23) and illumination wavelength (lambda =532 mathrm {nm}). The curves represent the limit at which a double-slit mask with center-to-center distance d (reported on the vertical axis and equal to twice the slit width) can be discriminated with a visibility of 10%, as a function of the longitudinal distance of the mask from the objective focal plane ((f-f_O)). The curves are obtained assuming the same illumination wavelength and numerical aperture for the two microscopes. Points (3D_1) and (3D_2) indicate the parameters of a three-dimensional sample made of two planar resolution targets (triple slits with slit distance (d=49.6,upmu mathrm {m})) placed at a distance (f_1-f_O = -1250,upmu mathrm {m}) and (f_2-f_O = 1250,upmu mathrm {m}), respectively, from the objective. Points A to E, and A’ to D’ correspond to further experimental data demonstrating the expected maximum achievable DOF of CLM at different resolutions, as the object (a resolution test target) is moved away from the plane at focus (A, A’: (d= 44.2,upmu mathrm {m}) at (f-f_O= pm 1000,upmu mathrm {m}); B, B’: (d= 39.4,upmu mathrm {m}) at (f-f_O= pm 750,upmu mathrm {m}); C, C’: (d= 31.3,upmu mathrm {m}) at (f-f_O= pm 500,upmu mathrm {m}); D, D’: (d= 22.1,upmu mathrm {m}) at (f-f_O= pm 250,upmu mathrm {m}), E: (d= 4,upmu mathrm {m}) at (f-f_O=0,upmu mathrm {m})). The refocused images of the triple slits corresponding to points A and D’ are shown in panel (b), while the other cases are reported in the Supplementary Information. The line plots below the refocused images show the image intensities, averaged along the vertical directions and normalized to their maxima. Panel (c) reports the images of the three-dimensional test sample described above, corresponding to points (3D_1) and (3D_2) in panel (a): image acquired by the standard microscope (left), CLM refocusing on the plane of the closest and farthest target, (3mathrm {D}_1) (center) and (3mathrm {D}_2) (right), respectively. The line plots below the refocused images show the intensities within the regions boxed in red, averaged along the longitudinal slit direction and normalized to their maxima.
The results in Fig. 3c also demonstrate that CLM improves by over one order of magnitude the acquisition speed with respect to previous correlation-based light-field imaging protocols37,38, where (5times 10^4) frames (to be compared with the current (5times 10^3)) and additional low-pass Gaussian filtering were employed in post-processing to achieve a comparable SNR. This improvement directly comes from the elimination of ghost imaging from the CLM architecture, and its replacement by conventional imaging at both sensor arrays. Actually, correlation between direct images has been shown to enable a significant improvement of the SNR with respect to ghost imaging38.
After the three-dimensional target, we tested the effectiveness of CLM on a thick phantom reproducing features of interest in biomedical applications; the sample is made of birefringent starch granules, suspended at random positions in a transparent non-birefringent gel. The focused plane inside the sample was arbitrarily chosen at approximately half of its thickness. In Fig. 4a, we show the standard image of the focused plane, while Fig. 4b reports the images of four different planes refocused by CLM, located at an optical distance from the focused plane of (-10,upmu mathrm {m}), (-130,upmu mathrm {m}), (-310,upmu mathrm {m}), and (+200,upmu mathrm {m}), respectively. It is evident that some aggregates appear focused in only one of the four images, which provide a tool to identify their longitudinal optical distance from the focal plane. The volumetric resolution of CLM enabled us to refocus 54 planes over a (1,mathrm {mm}) thick volume, with a transverse resolution smaller than (20,upmu mathrm {m}) and a longitudinal resolution smaller than (90,upmu mathrm {m}), within a FOV of about (1,mathrm {mm}^2) (see video in the Supplementary Information).
Interestingly, in the current CLM architecture, the SNR is high enough for images from different viewpoints to be effectively observable (hence, available for further data analysis, such as three-dimensional reconstruction). In Fig. 5, we report the change of perspective obtained by CLM when moving the “viewpoint” on the objective lens plane, along the horizontal direction: While the position of details at focus does not change with the particular perspective, out-of-focus starch granules shift along the horizontal direction as the point of view is changed. Through a single correlation image, we have acquired 130,000 images of the sample from different viewpoints, distributed over the area of the objective lens ((sim 1,mathrm {cm}^2)), each one characterized by a diffraction-limited spatial resolution of (40,upmu mathrm {m}). Such a high number of statistically independent perspectives has allowed us to produce viewpoints images in which the details of the object can be clearly distinguished, a feature which is particularly relevant in view of implementing 3D reconstruction algorithms based on viewpoint multiplicity.
First-order image of a thick biomedical phantom (a) acquired at (f-f_O=0) (upmu mathrm {m}), and refocused CLM images of four distinct planes inside the same sample (b); the specific value of (z=f-f_O) is reported on top of each image. All images have been obtained from the same data, using (N=5000) frames. The technique used to optimize the correlation function in this case is described in the “Materials and methods” section.
The refocusing capability of CLM has brought to a 6 times larger DOF than in a conventional microscope having the same numerical aperture, and the same (diffraction-limited) resolution in the focused plane. These results are in excellent agreement with the expected refocusing range of CLM44 at the given resolution ((d=50,upmu mathrm {m})), thus showing the reliability of the proposed CLM architecture. The volumetric resolution achieved by CLM to image a complex thick sample ((1 times 1 times 1 ,mathrm {mm}^3)) is a further very interesting result, considering the scanning-free nature of CLM. In the employed CLM setup, we obtained 54 independent axial sections of the biological phantom. Considering how the axial and transverse resolution change along the optical axis, this corresponds to a total (7.21times 10^6) voxels within the volume of interest. Notice that the device considered in this work is meant as a proof-of-principle demonstrator, and its parameters are not optimized. However, the properties reported in Table 1 provide a guideline to scale the setup towards smaller resolutions in view of real applications. All these results are unattainable by standard light-field microscopy, due to its hyperbolic tradeoff between spatial resolution and multi-perspective views (hence, maximum achievable DOF).
CLM shares with traditional light-field microscopy the capability of performing three-dimensional imaging without moving the sample nor any part of the optical apparatus; resolution depends on the distance from the focal plane, as shown in Fig. 3, but is uniform in the transverse directions, as far as light propagation can be considered paraxial44. These features can be compared to the properties of a consolidated technique such as confocal microscopy, which requires both longitudinal and transverse scanning to perform imaging with uniform volumetric resolution, and of a much less time-consuming technique such as light-sheet microscopy with non-diffracting beams, which requires only longitudinal scanning, trading this interesting feature with inhomogeneous illumination and resolution in the transverse direction. The main drawback of CLM lies in its operational definition: while in incoherent first-order imaging the SNR can be increased by just exposing the sensor for a time much larger than the source coherence time, a reliable reconstruction of the correlation function (1) requires to collect a large number of distinct frames, whose duration should be preferably matched with the source coherence time.
Increasing the acquisition speed of CLM is the principal challenge that needs to be addressed to guarantee its competitiveness with state-of-the art light-field microscopes25. Such speed-up is in fact of paramount importance both for avoiding radiation damage of biomedical samples, for in vivo imaging, and for studying dynamic processes. The large SNR of CLM with respect to the original CPI scheme represents a first significant step in this direction, as it enabled to increase the acquisition speed by one order of magnitude, still guaranteeing an even higher SNR (see Ref. 33). Similar to the approach for noise mitigation implemented here (Figs. 4, 5), and outlined in the “Materials and methods” section, a further step toward acquisition speed-up is compressive sensing and deep learning techniques, as increasingly applied to imaging tasks47,48,49,50. From the hardware viewpoint, the acquisition speed of our microscope has ample room for improving, both by investigating possible optimizations in our current acquisition routine and by employing cameras with better time performance. The most immediate way to start boosting the time performance of the current CLM, for example, is to employ the camera (see “Materials and methods” section) in rolling-shutter mode, rather than global shutter, which we have been using to guarantee that the retrieved intensity patterns (I_a) and (I_b) (which are then correlated pixel by pixel) are simultaneous statistical sampling of the chaotic source. This condition is consistent with the theoretical model (i.e., Eq. (1)), but it is certainly interesting to search for a regime in which moving slightly away from the theory introduces small enough artifacts to justify the gain in speed. With our camera, this could mean even doubling the frame rate, reducing the current acquisition time to about 20 seconds (from the present 43). Also the chaotic source can be significantly improved by replacing the ground-glass disk now in use (see the “Materials and methods” section) with a digital micromirror device (DMD), which adds versatility and available statistics, while significantly decreasing the source coherence time due to its typical frame rate of about 30 kHz. Also, since the DMD patterns are completely user-controllable, their features can be customized to achieve the desired SNR with the lowest number of frames possible, even experimenting with structured illumination. In this scenario, the acquisition speed will essentially be limited by the maximum frame rate of the sensor and, eventually, by the data transferring speed. This issue can be addressed by replacing our current sCMOS with faster cameras, capable of reaching 6.6 kfps at full resolution51, or with ultra-fast high-resolution SPAD arrays, enabling acquisition rates as high as (10^5) binary frames per second, in a (512 times 512) array52,53. When choosing alternative cameras, speed should not be favored at the expenses of readout noise, dynamic range, detection efficiency, or minimum exposure time, all which are relevant parameters in correlation-based imaging. In this respect, SPAD arrays are of particular interest due to their much shorter minimum exposure time, ranging from a few hundreds of ps to 10 ns52,53,54,55, although their binary nature may pose challenges. The minimum exposure time of the camera also regulates the possibility of extending CLM to uncontrolled thermal sources, including the fluorescence samples at the core of the related microscopy technique. CLM and fluorescence microscopy are certainly compatible due to the chaotic nature of fluorescent light, but an experimental challenge needs to be addressed in such a context: matching the low coherence time of fluorescent light with the minimum exposure time of the sensor. An analogous problem was successfully faced by Hanbury-Brown and Twiss in the Narrabri stellar interferometer56 and in more recent correlation imaging experiments performed with sunlight57,58. In the context of CLM, we shall address this challenge in future works.
Change of perspective within the (1, mathrm {mm}^3) sample of starch grains suspended in gel, as obtained through CLM. The change of perspective is implemented by correlating the intensity registered by each pixel of the spatial sensor ((D_a)) with the intensity registered by a small portion ((10 times 10) pixels) of the angular sensors ((D_b)), centered on the point (varvec{rho }_b = (-Mrho _{O,x},0)), corresponding to the horizontal coordinate (rho _{O,x}) on the objective lens [i.e., by varying the second argument in Eq. (2)]. Two different viewpoints of the sample are shown, selected on the horizontal diameter of the objective lens. The image on the left is the perspective from a point placed 3145 (upmu)m to the left of the center of the lens, corresponding to an angle of (-5^{circ }) from the optical axis (OA). The one on the right is the viewpoint at (-1050,upmu)m ((-2^{circ }) with respect to OA). Three different features are highlighted. The starch granule labeled by 1 does not shift with a change of viewpoint, meaning it is placed on the focal plane of the objective. The granule labeled with 2 shifts to the right as the viewpoint shifts to the right, meaning it is placed (out of focus) on a plane between the lens and its focal plane. The granule labeled with 3, on the other hand, suffers a shift in the opposite direction, meaning its longitudinal distance from the lens is larger than the focal length. As one would expect from a viewpoint change along the horizontal, none of the visible granules change their position along the vertical axis.
We finally remark that the need for many short exposure times to create a single image is common to other established microscopy techniques, such as STORM59. This result is encouraging in view of avoiding photo-bleaching and photo-damage, also considering that the SNR requirements on each single frame of CLM are much weaker than in STORM, where the signal should be clear enough to allow centroid estimation. Exposure-related problem could also be reduced by modulating illumination in time, with a frequency matched with the acquisition frame rate.
The experimental setup employed to demonstrate CLM is shown in Fig. 6. The controllable chaotic light source is a single-mode laser with wavelength (lambda =532,mathrm {nm}) (CNI MLL-III-532-300 mW) illuminating a rotating ground glass disk (GGD), with diffusion angle (theta _d simeq 14^{circ }), whose speed defines the source coherence time ((approx 90 upmu)s). The laser spot size on the disk is enlarged to a diameter of 8 mm by a (6 times) beam expander, and the sample is placed at a distance of (10,mathrm {mm}) after the GGD; the effective numerical aperture of our systems is thus (mathrm {NA} = 0.23) which defines our expected diffraction-limited resolution (delta = 1.6,upmu mathrm {m}). Light transmitted by the object propagates toward the objective lens O, with focal length (f_O = 30,mathrm {mm}), and reaches the first polarizing beam splitter (PBS) where it is divided in two beams. The transmitted beam reaches the tube lens T, with focal length (f_T = 125,mathrm {mm}), and then impinges on the part of the sensor identified with (mathrm {D}_a). The distance between the objective lens O and the tube lens T is equal to the sum of the focal lengths of the two lenses, (f_O + f_T), and the distance between T and (mathrm {D}_a) coincides with (f_T). The focused image plane thus lies at a distance (f_O) from the objective lens. The beam reflected off the PBS illuminates lens L, with focal length (f_L = 150,mathrm {mm}), then impinges on the part of the sensor identified with (mathrm {D}_b), after being reflected by the second PBS. The distance (S_O) between the objective lens O and the lens L, and the distance (S_I) between L and (mathrm {D}_b) are conjugated and the front aperture of the objective is imaged on (mathrm {D}_b). The measured magnification of such image is (M_L = 0.31). Two disjoint halves of the same camera (Andor Zyla 5.5 sCMOS) are employed to simulate the two sensors (mathrm {D}_a) and (mathrm {D}_b), in order to guarantee synchronization. To fully exploit the dynamic range of the camera and maximize the SNR, we balance the intensities of the beams on the two halves of the sCMOS camera by means of a half-wave plate placed before in the laser beam, before the GGD. The camera sensor is characterized by (2560times 2160) pixels of size (delta _{mathrm {p}} = 6.5,upmu mathrm {m}) and can work at up to 50 fps in full-frame mode (in global shutter mode, 100 fps with rolling shutter). Since the resolution (delta = 1.6,upmu mathrm {m}) on the object corresponds to a magnified resolution cell (Mdelta = 6.7,upmu mathrm {m}) on the sensor, data reported in Figs. 4, 5 were generally acquired with a (2times 2) hardware binning; no binning was applied when acquiring data corresponding to points C, D, their primed counterparts, and E, in Fig. 3a. The test targets employed to acquire data reported in Fig. 3 are Thorlabs R3L3S1N and R1DS1N. The exposure time was set at (tau = 92.3,upmu mathrm {s}) to match the coherence time fo the source, and the acquisition rate of the camera to (R = 120,mathrm {Hz}), the maximum speed possible at our FOV in global shutter mode.
Experimental setup for CLM. Light produced by a chaotic source, made of a laser, a beam expander (BE), a half-wave plate (HWP) and a rotating ground-glass disk (RGGD), illuminates the object, is collected by the objective lens (O), and reaches the first polarizing beam splitter (PBS). The transmitted beam passes trough the tube lens (T) and the second PBS, and finally impinges on the detector (mathrm {D}_a), which is the (blue) half of the sensor of the CMOS camera. The focused image is characterized by magnification (M = f_T/f_O = 4.2). The reflected beam passes through the additional lens L and then is reflected by a second PBS toward detector (mathrm {D}_b), which is the disjoint (magenta) half of the sensor on the same sCMOS camera. The magnification of the objective lens O on (mathrm {D}_b) is (M_L=0.31). All the experimental results shown in the article are obtained in this setup.
All the refocused images reported in the article are obtained by applying the refocusing formula in Eq. (3) to the experimental four-dimensional correlation function. We also applied a correction to eliminate edge-effects due to the size of the detectors, as described in Ref. 45. The problem of the noisy background occurring in the refocused images of the biomedical phantom (Figs. 4, 5) was tackled by pre-processing the correlation function. The statistical noise, which is quantified by the variance of the quantity measured in Eq. (1), can be reduced by optimizing the correlation function with the introduction of an additional term; this approach is consistent with so called differential ghost imaging60, where each pixel of (mathrm {D}_b) is considered as a bucket detector. The mentioned correction consists in subtracting from the correlation function a spurious self-correlation between intensity fluctuations on each single pixel of the spatial detector (mathrm {D}_a) and intensity fluctuations on the whole detector, thus obtaining the modified correlation
with (I_a^{mathrm {TOT}}) the total intensity impinging on the detector (mathrm {D}_a). The free parameter K can be fixed by the condition of minimizing the variance
of the modified correlation function. Derivation of (mathcal {F}(varvec{rho }_a,varvec{rho }_b)) with respect to K immediately shows that the minimum is reached for
The different outcome of the analysis when considering the standard correlation function of Eq. (1) and the modified one of Eq. (4) can be found in the Supplementary Information.
The viewpoint multiplicity is defined as the effective number of viewpoints per transverse direction. In the case of CLM, the viewpoint multiplicity is estimated as the number of resolution cells falling within the diameter D of the objective lens. The resolution cell must be evaluated by considering that, in the correlation function, the sample acts as an aperture, and thus determines the resolution on the objective lens (see Ref. 44 for details). Considering a sample made of a bright object of diameter a, placed in the focal plane of the objective lens, the size of the resolution cell on the lens plane reads
Therefore, the viewpoint multiplicity can be evaluated as
This result highlights an interesting reciprocity relation between the two apertures and the two resolution cells, on the objective lens and the object plane. The above results, evaluated for an object in the focal plane, are still approximately valid if the object axial position z satisfies (|z-f_O|ll f_O).
The DOF of each single refocus image provides information on the CLM axial resolution. As reported in the second column of Table 1, CLM is characterizd by the same DOF as a standard microscope in the objective focal plane, determined by the numerical aperture and wavelength of illumination. When the object is moved out of focus, the DOF of the refocused image can be determined by a geometrical-optics approach. If two point sources, placed on opposite sides of the optical axis and separated by a distance a along the transverse direction x, are located on a transverse plane placed at a distance z from the objective, the correlation function they generate reads
as given by Eq. (2), with (delta ^{(2)}(varvec{rho })) the two-dimensional Dirac delta and (hat{u}_x) the unit vector along the x-axis. By refocusing the image described by Eq. (9) through the refocusing algorithm of Eq. (3), we see that, as soon as refocusing is implemented on an axial coordinate different from the one identifying the object position ((fne z)), each point-like source generates a “circle of confusion” analogous to the one of conventional imaging. Unlike other CLM features, the circle of confusion depends on the numerical aperture of the CLM device. The refocused image at a generic distance (fne z) reads
Assuming the objective lens transmission function P is a circular iris of radius R, Eq. (10) represents two circles of radius (MR|f-z|/z) and centered in (pm Mf/2z,varvec{a}). Therefore, there will exist a range for which the refocusing parameter f generates two separate circles; outside of that range, the two circles begin to overlap and, ultimately, the two sources can no longer be resolved. Particularly, there will be two refocusing positions (f^prime) and (f^{prime prime }) for which Eq. (10) describes two tangent circles. We thus define the DOF of the refocused images as
where the approximation holds for (|f^{prime}-f^{primeprime}|ll f_O). Hence, depending on the size of the object details of interest, the images refocused by CLM have a DOF that depends on the numerical aperture in the same fashion as for a standard microscope. However, the ratio between the extended DOF available to CLM and the DOF of the refocused image gives the number of independent planes accessible through refocusing, which is:
This result shows that, as is the case of conventional light-field imaging, the number of longitudinal planes that can be refocused is proportional to the viewpoint multiplicity on the lens plane. The advantage of CLM over conventional light-field imaging is the larger accessible viewpint multiplicity, as already discussed in the “Introduction”.
The datasets used and/or analysed during the current study are available from the corresponding author on reasonable request.
Mertz, J. Strategies for volumetric imaging with a fluorescence microscope. Optica 6, 1261 (2019).
ADS  CAS  Google Scholar 
Oku, H., Hashimoto, K. & Ishikawa, M. Variable-focus lens with 1-kHz bandwidth. Opt. Express 12, 2138 (2004).
ADS  PubMed  Google Scholar 
Mermillod-Blondin, A., McLeod, E. & Arnold, C. B. High-speed varifocal imaging with a tunable acoustic gradient index of refraction lens. Opt. Lett. 33, 2146 (2008).
ADS  PubMed  Google Scholar 
Huisken, J., Swoger, J., Del Bene, F., Wittbrodt, J. & Stelzer, E. H. K. Optical sectioning deep inside live embryos by selective plane illumination microscopy. Science 305, 1007 (2004).
ADS  CAS  PubMed  Google Scholar 
Fahrbach, F. O., Simon, P. & Rohrbach, A. Microscopy with self-reconstructing beams. Nat. Photonics 4, 780 (2010).
ADS  CAS  Google Scholar 
Fahrbach, F. O. & Rohrbach, A. A line scanned light-sheet microscope with phase shaped self-reconstructing beams. Opt. Express 18, 24229 (2010).
ADS  PubMed  Google Scholar 
Vettenburg, T. et al. Light-sheet microscopy using an Airy beam. Nat. Methods 11, 541–544 (2014).
CAS  PubMed  Google Scholar 
Chen, B. C. et al. Lattice light-sheet microscopy: Imaging molecules to embryos at high spatiotemporal resolution. Science 346, 1257998 (2014).
PubMed  PubMed Central  Google Scholar 
Chu, L. A. et al. Rapid single-wavelength lightsheet localization microscopy for clarified tissue. Nat. Commun. 10, 4762 (2019).
ADS  PubMed  PubMed Central  Google Scholar 
Takanezawa, S., Saitou, T. & Imamura, T. Wide field light-sheet microscopy with lens-axicon controlled two-photon Bessel beam illumination. Nat. Commun. 12, 2979 (2021).
ADS  CAS  PubMed  PubMed Central  Google Scholar 
Moneron, G. et al. Fast STED microscopy with continuous wave fiber lasers. Opt. Express 18, 1302–1309 (2010).
ADS  CAS  PubMed  Google Scholar 
Zong, W. Fast high-resolution miniature two-photon microscopy for brain imaging in freely behaving mice. Nat. Methods 14, 713–719 (2017).
CAS  PubMed  Google Scholar 
Maurer, C., Khan, S., Fassl, S., Bernet, S. & Ritsch-Marte, M. Depth of field multiplexing in microscopy. Opt. Express 18, 3023 (2010).
ADS  PubMed  Google Scholar 
Waller, L. & Tian, L. Computational imaging: Machine learning for 3D microscopy. Nature 523, 416 (2015).
ADS  CAS  PubMed  Google Scholar 
Adelson, E. H. & Wang, J. Y. Single lens stereo with a plenoptic camera. IEEE Trans. Pattern Anal. Mach. Intell. 14, 99 (1992).
Google Scholar 
Ng, R. et al. Light field photography with a hand-held plenoptic camera. Comput. Sci. Tech. Rep. CSTR 2, 1 (2005).
CAS  Google Scholar 
Levoy, M., Ng, R., Adams, A., Footer, M. & Horowitz, M. Light field microscopy. ACM Trans. Graph. 25, 924 (2006).
Google Scholar 
Georgiev, T. G. & Lumsdaine, A. Focused plenoptic camera and rendering. J. Electron. Imaging 19, 021106 (2010).
ADS  Google Scholar 
Goldlücke, B., Klehm, O., Wanner, S. & Eisemann, E. Plenoptic cameras. In Digital Representations of the Real World: How to Capture, Model, and Render Visual Reality (eds Magnor, M. et al.) (CRC Press, Cambridge, 2015).
Google Scholar 
Muenzel, S. & Fleischer, J. W. Enhancing layered 3d displays with a lens. Appl. Opt. 52, D97 (2013).
PubMed  Google Scholar 
Minsky, M. Memoir on inventing the confocal microscope. Scanning 10, 128 (1988).
Google Scholar 
Dansereau, D. G. Pizarro, O. & Williams, S. B. Decoding, calibration and rectification for lenselet-based plenoptic cameras. In 2013 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) (IEEE, 2013).
Perez, J. et al. Super-Resolution in plenoptic cameras using FPGAs. Sensors 14, 8669 (2014).
ADS  PubMed  PubMed Central  Google Scholar 
Li, Y., Sjöström, M., Olsson, R. & Jennehag, U. Scalable coding of plenoptic images by using a sparse set and disparities. IEEE Trans. Image Process. 25, 80 (2016).
ADS  MathSciNet  PubMed  MATH  Google Scholar 
Prevedel, R. et al. Simultaneous whole-animal 3d imaging of neuronal activity using light-field microscopy. Nat. Methods 11, 727 (2014).
CAS  PubMed  PubMed Central  Google Scholar 
Skocek, O. et al. High-speed volumetric imaging of neuronal activity in freely moving rodents. Nat. Methods 15, 429 (2018).
CAS  PubMed  PubMed Central  Google Scholar 
Classen, A., von Zanthier, J., Scully, M. O. & Agarwal, G. S. Superresolution via structured illumination quantum correlation microscopy. Optica 4, 580 (2017).
ADS  Google Scholar 
Kviatkovsky, I., Chrzanowski, H. M., Avery, E. G., Bartolomaeus, H. & Ramelow, S. Microscopy with undetected photons in the mid-infrared. Sci. Adv. 6, eabd0264 (2020).
ADS  CAS  PubMed  Google Scholar 
Simon, D. S. & Sergienko, A. V. Twin-photon confocal microscopy. Opt. Express 18, 22147 (2010).
ADS  CAS  PubMed  Google Scholar 
Monticone, D. G. et al. Beating the Abbe diffraction limit in confocal microscopy via nonclassical photon statistics. Phys. Rev. Lett. 113, 143602 (2014).
ADS  Google Scholar 
Samantaray, N., Ruo-Berchera, I., Meda, A. & Genovese, M. Realization of the first sub-shot-noise wide field microscope. Light Sci. Appl. 6, e17005 (2017).
ADS  CAS  PubMed  PubMed Central  Google Scholar 
Altmann, Y. et al. Quantum-inspired computational imaging. Science 361, 6403 (2018).
Google Scholar 
D’Angelo, M., Pepe, F. V., Garuccio, A. & Scarcelli, G. Correlation plenoptic imaging. Phys. Rev. Lett. 116, 223602 (2016).
ADS  PubMed  Google Scholar 
Pepe, F. V., Scarcelli, G., Garuccio, A. & D’Angelo, M. Plenoptic imaging with second-order correlations of light. Quantum Meas. Quantum Metrol. 3, 20 (2016).
Google Scholar 
Pepe, F. V., Di Lena, F., Garuccio, A., Scarcelli, G. & D’Angelo, M. Correlation plenoptic imaging with entangled photons. Technologies 4, 17 (2016).
Google Scholar 
Pepe, F. V., Vaccarelli, O., Garuccio, A., Scarcelli, G. & D’Angelo, M. Exploring plenoptic properties of correlation imaging with chaotic light. J. Opt. 19, 114001 (2017).
ADS  Google Scholar 
Pepe, F. V. et al. Diffraction-Limited Plenoptic Imaging with Correlated Light. Phys. Rev. Lett. 119, 243602 (2017).
ADS  PubMed  Google Scholar 
Scala, G., D’Angelo, M., Garuccio, A., Pascazio, S. & Pepe, F. V. Signal-to-noise properties of correlation plenoptic imaging with chaotic light. Phys. Rev. A 99, 053808 (2019).
ADS  CAS  Google Scholar 
Pittman, T. B., Shih, Y. H., Strekalov, D. V. & Sergienko, A. V. Optical imaging by means of two-photon quantum entanglement. Phys. Rev. A 52, R3429(R) (1995).
ADS  Google Scholar 
Gatti, A., Brambilla, E., Bache, M. & Lugiato, L. A. Ghost imaging with thermal light: comparing entanglement and classical correlation. Phys. Rev. Lett. 93, 093602 (2004).
ADS  CAS  PubMed  Google Scholar 
D’Angelo, M. & Shih, Y. Quantum imaging. Laser Phys. Lett. 2, 567 (2005).
ADS  Google Scholar 
Valencia, A., Scarcelli, G., D’Angelo, M. & Shih, Y. Two-photon imaging with thermal light. Phys. Rev. Lett. 94, 063601 (2005).
ADS  PubMed  Google Scholar 
Scarcelli, G., Berardi, V. & Shih, Y. Can two-photon correlation of chaotic light be considered as correlation of intensity fluctuations?. Phys. Rev. Lett. 96, 063602 (2006).
ADS  PubMed  Google Scholar 
Scagliola, A., Di Lena, F., Garuccio, A., D’Angelo, M. & Pepe, F. V. Correlation plenoptic imaging for microscopy applications. Phys. Lett. A 384, 126472 (2020).
MathSciNet  CAS  MATH  Google Scholar 
Massaro, G., Di Lena, F., D’Angelo, M. & Pepe, F. V. Effect of finite-sized optical components and pixels on light-field imaging through correlated light. Sensors 22, 2778 (2022).
ADS  PubMed  PubMed Central  Google Scholar 
Ng, R. Fourier slice photography. ACM Trans. Graph. 24, 735 (2005).
Google Scholar 
Katz, O., Bromberg, Y. & Silberberg, Y. Compressive ghost imaging. Appl. Phys. Lett. 95, 131110 (2009).
ADS  Google Scholar 
Liu, J., Zhu, J., Lu, C. & Huang, S. High-quality quantum-imaging algorithm and experiment based on compressive sensing. Opt. Lett. 35, 1206 (2010).
Google Scholar 
Delahaies, A., Rousseau, D., Gindre, D. & Chapeau-Blondeau, F. Exploiting the speckle noise for compressive imaging. Opt. Commun. 284, 3939 (2011).
ADS  CAS  Google Scholar 
Barbastathis, G., Ozcan, A. & Situ, G. On the use of deep learning for computational imaging. Optica 6, 921 (2019).
ADS  Google Scholar 
Phantom Ultrahigh-Speed. https://www.phantomhighspeed.com/products/cameras/ultrahighspeed. Accessed on 19 September 2021.
Bruschini, C., Homulle, H., Antolovic, I. M., Burri, S. & Charbon, E. Single-photon avalanche diode imagers in biophotonics: Review and outlook. Light Sci. Appl. 8, 87 (2019).
ADS  PubMed  PubMed Central  Google Scholar 
Ulku, A. et al. Wide-field time-gated SPAD imager for phasor-based FLIM applications. Methods Appl. Fluoresc. 8, 024002 (2020).
ADS  CAS  PubMed  PubMed Central  Google Scholar 
Madonini, F., Severini, F., Zappa, F. & Villa, F. Single photon avalanche diode arrays for quantum imaging and microscopy. Adv. Quantum Technol. 4, 2100005 (2021).
CAS  Google Scholar 
Villa, F., Severini, F., Madonini, F. & Zappa, F. SPADs and SiPMs arrays for long-range high-speed light detection and ranging (LiDAR). Sensors 21, 3839 (2021).
ADS  CAS  PubMed  PubMed Central  Google Scholar 
Hanbury Brown, R. & Twiss, R. Q. A test of a new type of stellar interferometer on sirius. Nature 178, 1046 (1956).
ADS  Google Scholar 
Karmakar, S., Meyers, R. & Shih, Y. H. Ghost imaging experiment with sunlight compared to laboratory experiment with thermal light. Proc. SPIE 8518, 851805 (2012).
Google Scholar 
Liu, X.-F. et al. Lensless ghost imaging with sunlight. Opt. Lett. 39, 2314 (2014).
ADS  PubMed  Google Scholar 
Rust, M. J., Bates, M. & Zhuang, X. Stochastic optical reconstruction microscopy (STORM) provides sub-diffraction-limit image resolution. Nat. Methods 3, 793–795 (2006).
CAS  PubMed  PubMed Central  Google Scholar 
Ferri, F., Magatti, D., Lugiato, L. A. & Gatti, A. Differential ghost imaging. Phys. Rev. Lett. 104, 253603 (2010).
ADS  CAS  PubMed  Google Scholar 
Download references
The Authors thank Francesco Scattarella for making the videos reported in the Supplementary Information. This work was supported by Istituto Nazionale di Fisica Nucleare (INFN) project PICS, PICS4ME, TOPMICRO, and, partially, “Qu3D”, and by Ministero dell’Università e della Ricerca (MUR) PON ARS project “CLOSE – Close to Earth”. Project Qu3D is supported by the Italian Istituto Nazionale di Fisica Nucleare, the Swiss National Science Foundation (grant 20QT21(_)187716 “Quantum 3D Imaging at high speed and high resolution”), the Greek General Secretariat for Research and Technology, the Czech Ministry of Education, Youth and Sports, under the QuantERA programme, which has received funding from the European Union’s Horizon 2020 research and innovation programme.
Dipartimento Interateneo di Fisica, Università degli Studi di Bari “Aldo Moro”, 70126, Bari, Italy
Gianlorenzo Massaro, Davide Giannella, Alessio Scagliola, Augusto Garuccio, Francesco V. Pepe & Milena D’Angelo
Istituto Nazionale di Fisica Nucleare, Sezione di Bari, 70125, Bari, Italy
Gianlorenzo Massaro, Davide Giannella, Alessio Scagliola, Francesco Di Lena, Augusto Garuccio, Francesco V. Pepe & Milena D’Angelo
Fischell Department of Bioengineering, University of Maryland, College Park, MD, 20742, USA
Giuliano Scarcelli
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
M.D. and F.V.P. conceived the idea and wrote the paper. M.D., A.G. and F.V.P. supervised the work. A.S. contributed to the development of the theory and the algorithms, to the first design of the experimental setup, and, together with F.D., to the preliminary data acquisition. F.D. has contributed to the improvement of the setup and to the optimization of the data analysis program. G.M. has further optimized the data analysis and noise mitigation programs, contributed to writing the paper, and, in collaboration with D.G., performed the experiment. G.S. provided support for the design of the experiment, and contributed to writing the paper. All authors contributed to revising the manuscript, and approved its final version.
Correspondence to Francesco V. Pepe.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Massaro, G., Giannella, D., Scagliola, A. et al. Light-field microscopy with correlated beams for high-resolution volumetric imaging. Sci Rep 12, 16823 (2022). https://doi.org/10.1038/s41598-022-21240-1
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-21240-1
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Scientific Reports (Sci Rep) ISSN 2045-2322 (online)
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

source

Audacity takes a “major step towards transforming into a DAW” as it reaches version 3.2 – MusicRadar

Audacity takes a “major step towards transforming into a DAW” as it reaches version 3.2  MusicRadar
source

Worldwide Music Production Software Industry to 2025 – Key Drivers, Challenges and Trends – ResearchAndMarkets.com – businesswire.com

DUBLIN–()–The “Global Music Production Software Market 2021-2025” report has been added to ResearchAndMarkets.com’s offering.
The publisher has been monitoring the music production software market and it is poised to grow by $296.27 million during 2021-2025, progressing at a CAGR of almost 8% during the forecast period.
The report on music production software market provides a holistic analysis, market size and forecast, trends, growth drivers, and challenges, as well as vendor analysis covering around 25 vendors.
The report offers an up-to-date analysis regarding the current global market scenario, latest trends and drivers, and the overall market environment. The market is driven by the increasing adoption of DJ software to produce music and the rising number of musicians and artists.
The music production software market analysis includes end-user segment, type segment, and geographic landscape. This study identifies the growing demand for digital audio content as one of the prime reasons driving the music production software market growth during the next few years.
Companies Mentioned
The report on music production software market covers the following areas:
The robust vendor analysis is designed to help clients improve their market position, and in line with this, this report provides a detailed analysis of several leading music production software market vendors that include Ableton AG, Adobe Inc., Apple Inc., Avid Technology Inc., Cockos Inc., Image Line Software NV, MAGIX Software GmbH, PreSonus Audio Electronics Inc., Reason Studios AB, and Steinberg Media Technologies GmbH. Also, the music production software market analysis report includes information on upcoming trends and challenges that will influence market growth. This is to help companies strategize and leverage all forthcoming growth opportunities.
The study was conducted using an objective combination of primary and secondary information including inputs from key participants in the industry. The report contains a comprehensive market and vendor landscape in addition to an analysis of the key vendors.
The publisher presents a detailed picture of the market by the way of study, synthesis, and summation of data from multiple sources by an analysis of key parameters such as profit, pricing, competition, and promotions. It presents various market facets by identifying the key industry influencers. The data presented is comprehensive, reliable, and a result of extensive research – both primary and secondary. The market research reports provide a complete competitive landscape and an in-depth vendor selection methodology and analysis using qualitative and quantitative research to forecast the accurate market growth.
Key Topics Covered:
1. Executive Summary
2. Market Landscape
3. Market Sizing
4. Five Forces Analysis
5. Market Segmentation by End-user
6. Market Segmentation by Type
7. Customer landscape
8. Geographic Landscape
9. Vendor Landscape
10. Analysis
11. Appendix
For more information about this report visit https://www.researchandmarkets.com/r/8if2lu

ResearchAndMarkets.com
Laura Wood, Senior Press Manager
[email protected]
For E.S.T Office Hours Call 1-917-300-0470
For U.S./CAN Toll Free Call 1-800-526-8630
For GMT Office Hours Call +353-1-416-8900
ResearchAndMarkets.com
Laura Wood, Senior Press Manager
[email protected]
For E.S.T Office Hours Call 1-917-300-0470
For U.S./CAN Toll Free Call 1-800-526-8630
For GMT Office Hours Call +353-1-416-8900

source

FoxRock: Hancock Street projects on track to finish in early 2024 – The Patriot Ledger

QUINCY – Excavation for the multiuse development at the site of the former Citizens Bank building downtown is nearing completion as FoxRock Properties works to renovate two side-by-side lots on Hancock Street. 
The developer warned residents last week that traffic disruption will continue through at least September 2023 on Russell Park as construction goes on. Both new developments are scheduled to be finished in early 2024. 
Reinventing Weymouth:A strong economy, housing demand, zoning encourage redevelopment
Quincy:2-story home to be torn down, smoke shop moves to make way for new development
The projects will include  major renovations to the  Masonic Temple at 1170 Hancock St. and the former bank building at 1200 Hancock St.
Demolition of the bank building is finished, the concrete foundation wall is nearing completion and the backfilling of foundations, utility installation and structural steel installation is ongoing.
Across Russell Park at the Masonic Temple, detailing and metallic decking is underway, as is utility and shaft installation. Wood framing is expected to begin in mid-October. 
The temple has sat empty since 2014, when a four-alarm fire gutted the 1920s-era building. The plan is to renovate the two-story building and make room for a restaurant. FoxRock will then build a six-story addition onto the back of the building, which will be connected on the lower levels, for 66 apartments and 6,500 square feet of retail space. 
Where the Citizens Bank building stood will be a six-story building with 3,800 square feet of retail space, 135 apartments and a second-floor, open-air pool deck for residents. The units will be a mix of studio, one bedroom and two bedrooms. 
FoxRock, the development company owned by Granite Telecommunications CEO Rob Hale, did not seek any variances for the projects.
The company also has the rights to develop the former Ross Lot downtown and plans to build a large life science building, restaurant and parking garage. The redevelopment of Hospital Hill – replacing Quincy’s former medical center with more than 400 residential units – is also a FoxRock project. 
Thanks to our subscribers, who help make this coverage possible. If you are not a subscriber, please consider supporting quality local journalism with a Patriot Ledger subscription. Here is our latest offer. 
Reach Mary Whitfill at [email protected]. 

source

The Future of Music with AI & Content Creators In 2022 – Magnetic Magazine

Diaa El All, CEO of Soundful
I started playing piano when I was three years old. I became fascinated with learning as much as I could. As I got older, my fascination grew into studying Sound Engineering and Production in college, and later working as a sound engineer and producer full-time. 
This is what inspired me to create Soundful, a new tool to help creators use music AI.
Soundful harnesses the power of AI as a very powerful creative tool for anyone who wants to create unique music, such as songwriters, producers, content creators, businesses, and more. 
My colleagues and I at Soundful used AI and machine learning techniques to teach computer music theory one note at a time. 
The result is a tool that empowers creators and offers them a hugely flexible platform that they can leverage in their own creative work. We’ve been able to achieve all that we have because of our incredible team. 
At its core, Soundful is the brainchild of some of the best producers and sound engineers from around the world. It’s a collective team effort from brilliant minds that hail from Fortune 500 companies and state-of-the-art music tech consumer products.

Instagram // Twitter // Soundcloud
As with any new technology, some people are afraid of AI. 
To those people, I would say: we’ve been using AI in DAWs, a variety of instruments, plugins, and elsewhere for years now. In the 80s as hip-hop took off, people decried rappers’ use of sampling as not actually being credible music. It took years for the mainstream to recognize that sampling, that two turntables and microphone, was actually an art form. 
Now, sampling is the modern-day bedrock for today’s biggest hits. It’s no longer viewed as stealing and cheating but instead reincarnating classic sounds into new songs.
But there are countless benefits to AI for creators. 
One of the biggest is to propel a songwriter/producer out of a creative rut. Getting started on a new project can be daunting, whether a creator has too many ideas or none at all…putting the pieces together and finding inspiration can be tough. This is where music AI can serve as a major catalyst in getting a new song off the ground, and bring a creator’s vision to life quicker and more smoothly than ever before. 
Take Soundful’s genre selection tool, for example. Let’s say a melodic techno producer wants to try experimenting with Bass House, but can’t find the right inspiration or sounds he or she is looking for. 
Soundful’s Bass House template is the place to start: in a matter of seconds, a fully original bass house song is created, and from there, the melodic techno artist can download the song's stems and put it into their DAW of choice, and proceed on their way to tropical house mastery. 
Music AI is a fantastic launchpad for endless inspiration!
A second great proponent of Soundful is the ability to start tracks that can never be copycats in our software. 
Through Soundful’s proprietary music theory-trained algorithms, its users can guarantee that the song they make will not sound like another song within our ecosystem, or come close to infringing on its copyrights, as we’ve seen so many times in the music industry. And of course, Soundful’s tracks can be owned by the individual user, which puts enormous power and simplicity into the creators’ hands.
Thirdly, there’s rampant fear of AI taking jobs away. The reality is that AI is actually creating more jobs, especially within the music industry. When we need a new sound library, we hire sound designers. At Soundful, we’ve employed countless sound designers from across the globe to create our one-of-a-kind, top-quality sound libraries. AI is really positioned to create more jobs instead of taking them away.
Lastly, music AI is a powerful tool for the creator economy. In this new digital age, the role of the content creator is more important than ever. But with that importance comes the need for these creators to wear countless hats: they need to produce the content, promote the content, find collaborators, and source music that won’t land them in licensing hot water. 
But what if there were a way to make things easier, and help the vital content creator on their way to success? 
That’s where AI comes in: content creators can automatically generate their own genre-specific royalty-free music that perfectly encapsulates the overall vibe of their visual content. It removes one big thorn in the side of every creator today, which is having to navigate the complexities of the current music licensing landscape.
It’s become increasingly more difficult for creators to break the mold, whether it be producers finding new genres to experiment with, classically trained instrumentalists looking for that perfect way to start a song, or TikTok creators monetizing their content all the way down to their music. The future of music at the hands of AI is hugely beneficial for creators at all levels. 
Anything new is scary to people, particularly in our industry. But it is my firm belief that AI in the hands of talented creators will move songwriting and producing forward and be a catalyst for a brand new groundswell of creativity. 

source

‹ Previous Next ›