MSF has been advocating for better more effective treatment for drug-resistant tuberculosis (DR-TB) since the late 1990s. The side effects of the medicines people currently take for DR-TB are often described as worse than the disease itself. Patients take up to 20 pills a day, alongside painful injections in some countries, with treatment lasting up to 18 months. Over the course of their treatment, some patients are unable to go to work, socialise, or even visit public places. Their lives are put on hold. And after all that, only about half of people with DR-TB are cured.
DR-TB also tends to affect people from some of the most disadvantaged communities MSF works with. In many cases, people do not know what life will hold for them in over a year’s time when their treatment is due to end. It is in this context that TB-PRACTECAL was conceived (2013) and launched (2017) by MSF-OCA. TB-PRACTECAL is a drug-resistant tuberculosis research programme encompassing a randomised clinical trial (RCT) and three sub-studies (Economic Assessment, Patient Reported Outcomes, and Pharmacokinetic/Pharmacodynamics).
The RCT is a multi-centre, open label, multi-arm, randomised, controlled, phase II-III trial, evaluating short treatment regimens containing newly approved drugs bedaquiline and pretomanid in combination with existing and re-purposed anti-TB drugs for the treatment of biologically confirmed pulmonary multidrug-resistant TB (MDR-TB).
The clinical trial was implemented in Uzbekistan, Belarus, and South Africa, and enrolled 552 patients from January 2017 to March 2021. The trial was stopped early (~85% target sample size) due to the new drugs showing significant improvements in efficacy and safety compared to the control standard of care treatment. All patients in the trial were followed up for a minimum of 72 weeks post randomisation until August 2022. The clinical trial and the three sub-studies completed data collection in Q3 2022 and will carry out final analysis during Q4 2022. The project is currently scheduled to end in Q1 2023.
Given that the project is concluding in the next months, there is an opportunity to evaluate the project to provide MSF-OCA and the wider MSF movement valuable learning from the undertaking of a 10-year, 35m euro research project.
EVALUATION PURPOSE, OBJECTIVES, AND QUESTIONS
This is a summative (process) evaluation. The scientific outcomes of the trial have been assessed and published as part of the RCT, and they will be included as point of reference to assess the effectiveness of the intervention. There are also other sub-studies ongoing that include an economic assessment, patient reported outcomes, and aspects related to pharmacokinetics/ pharmacodynamics. Although these aspects will be out of the scope of this evaluation, the decision of having these studies will be considered when assessing the overall design of the intervention.
The objectives of the evaluation are:
Due to the complexity of TB-PRACTECAL, the evaluation will be organised in five sub-studies, each focusingon a specific aspect of the process.
These sub-studies will be linked to each other, and data shared when necessary to make evaluation inferences. The proposed evaluation sub-streams are a) RCT design, b) governance, c) implementation, d) partnerships and communication, e) ethical dilemmas.
The role advertised in this CfA is for the evaluation team member responsible for sub studies a) RCT design, and e) ethical dilemmas.
To achieve the evaluation objectives, the following questions are proposed for each of the two sub-studies:
EQ1. How appropriate was the design of an RCT and three sub-studies in relation with the TB-PRACTECAL objectives? The appropriateness will be assessed against the intervention outcomes, constrains and failures. The evaluation will consider the context in which decisions were made at the time of the design of the intervention. Actual programme components and outcomes, rather than the intended ones, will be considered.
EQ2. Were there alternative designs that could have produced additional benefits? Linked to the previous question, the evaluation will explore alternatives to the chosen design, if any, and elaborate on potential advantages and disadvantages. To assess potential alternatives, the evaluation will consider aspects related to the population studied, randomisation of participants, blinding, cost, data analysis, etc. As an example, decisions linked to MSF operational involvement – as compared to just funding a third party specialised in Clinical Research to deliver results – will be part of the discussion.
EQ3. What were the mechanisms designed to manage risks (medical, project, organisational) and were they fit for purpose? Under this question the evaluation will consider the mechanisms in place to identify, assess, mitigate, and review risks. Some of the aspects to consider will be related to the complexity of the study, the participation/or lack of it of vulnerable populations, standard practices in selected sites, etc. In addition to documenting risks and their management, the evaluation will identify risks that were identified but not included in the formal mechanism. This will help understand the thought process and describe barriers and constrains in the process.
EQ 12. What were the main ethical dilemmas that were anticipated and which ones were not? What are the lessons learned? This question will explore key dilemmas faced by different structures of the project (Governance, HQ, field, participants, partners, etc.) and what the outcome was. The evaluation will consider these aspects within the contextual challenges of humanitarian interventions. The MSF ERB “Framework for Ethics review” will be used as a guide.
EQ 13. What were the mechanisms in place to resolve the ethical dilemmas and what were the results? Linking with the previous question, the evaluation will analyse the mechanisms that were in place and how they functioned, in case of all (or selected if too many) identified dilemmas.
EQ 14. What are the implications at various levels (organisation, partners, and society) of MSF committing to this type of intervention? This question will draw from information collected in most of the earlier questions to infer what the positive and negative implications on the short, medium, and long terms are.
METHODOLOGY AND DATA SOURCES Evaluators are expected to elaborate a methodology based on remote and on-site data collection methods, including:
EXPECTED OUTPUTS An inception report outlining the scope, workplan, timeline, methodology and limitations will be provided by mid-November 2022.
A first draft report is expected by mid-January 2023.
A final report with findings, discussion and recommendations is expected by the end of January 2023.
A PowerPoint presentation to accompany the evaluation findings should be prepared by the evaluator(s) for ease of presenting findings. Results will be presented to the Commissioners team, field Missions, Cell and the VEU stakeholders shortly after presenting the final report.
PROFILE / REQUIREMENTS FOR APPLICANTS Applicants should have the following qualifications and experience:
1) A proposal containing an initial version of evaluation matrix and the expected budget1 (total estimated workload: 30 consultancy days)
3) CV(s)
4) One example of past evaluation report in a similar context or topic
Applications should be sent to [email protected]
Colombia + 1 more
Nigeria
Syria
Syria
ReliefWeb’s Terms & Conditions.
© 2022 all rights reserved.
Related Platforms
Other OCHA Services
RCT specialist for the Evaluation of the MSF TB-Practecal Clinical Research Project – ReliefWeb
SHAREHOLDER INVESTIGATION: Halper Sadeh LLC Investigates EQ, MTCR, STOR, RCKT – Metacrine (NASDAQ:MTCR), – Benzinga
NEW YORK, Sept. 26, 2022 /PRNewswire/ — Halper Sadeh LLC, an investor rights law firm, is investigating the following companies for potential violations of the federal securities laws and/or breaches of fiduciary duties to shareholders relating to:
Equillium, Inc. EQ's merger with Metacrine Inc. If you are an Equillium shareholder, click here to learn more about your rights and options.
Metacrine Inc. MTCR's merger with Equillium, Inc. If you are a Metacrine shareholder, click here to learn more about your rights and options.
STORE Capital Corporation STOR's sale to GIC and funds managed by Oak Street for $32.25 per share in cash. If you are a STORE Capital shareholder, click here to learn more about your rights and options.
Rocket Pharmaceuticals, Inc. RCKT's merger with Renovacor, Inc. If you are a Rocket shareholder, click here to learn more about your rights and options.
Halper Sadeh LLC may seek increased consideration for shareholders, additional disclosures and information concerning the proposed transaction, or other relief and benefits on behalf of shareholders.
Shareholders are encouraged to contact the firm free of charge to discuss their legal rights and options. Please call Daniel Sadeh or Zachary Halper at (212) 763-0060 or email [email protected] or [email protected].
Halper Sadeh LLC represents investors all over the world who have fallen victim to securities fraud and corporate misconduct. Our attorneys have been instrumental in implementing corporate reforms and recovering millions of dollars on behalf of defrauded investors.
Attorney Advertising. Prior results do not guarantee a similar outcome.
Contact Information:
Halper Sadeh LLC
Daniel Sadeh, Esq.
Zachary Halper, Esq.
(212) 763-0060
[email protected]
[email protected]
https://www.halpersadeh.com
View original content to download multimedia:https://www.prnewswire.com/news-releases/shareholder-investigation-halper-sadeh-llc-investigates-eq-mtcr-stor-rckt-301632647.html
SOURCE Halper Sadeh LLP
© 2022 Benzinga.com. Benzinga does not provide investment advice. All rights reserved.
Live Oak man arrested in stabbing that left victim’s intestines ‘exposed,’ records show – KSAT San Antonio
See the complete list
WEATHER ALERT
Rebecca Salinas, Digital Journalist
Published:
Rebecca Salinas, Digital Journalist
SAN ANTONIO – A Live Oak man has been arrested following an altercation and stabbing that left the victim’s intestines “exposed,” according to court records.
Phillip Andrew Montez, 21, has been charged with aggravated assault causing serious bodily injury and tampering with evidence, records with the Bexar County Jail show.
Live Oak police said the incident happened early Monday morning in the 11500 block of Lone Shadow Trail, not far from Kitty Hawk and Toepperwein roads.
Officers arrived to find the victim in the middle of the road. He had a severe stab wound to his stomach and his “intestines were exposed,” police said. He was taken to Brooke Army Medical Center.
The suspect and male victim gave police conflicting reports of what led to the stabbing, but a witness said that it unfolded after she claimed Montez touched her inappropriately, according to an arrest warrant affidavit.
The witness told police that they were hanging out at a home in Converse on Sunday night, and she reported Montez to the victim.
Both men then went outside the home, and the witness said she never saw them again that night.
The victim later told police that he asked Montez to “go for a ride” to talk about the allegations. They left in Montez’s car and Montez drove them to his house, police said.
The affidavit states that on the way there, Montez texted a relative and told him to meet him outside with a gun.
The victim told police that when they arrived, the relative came out of a bush, approached him, and pointed a gun at him.
He said that once he got out of the car, Montez approached him from the back and cut him in the stomach, the affidavit states. He said they fought over the knife, which cut his hand, and Montez’s relative hit him on the head with the gun.
The victim was able to break free and started to crawl down the road. He said he saw one of the men following him and then said, “Ok bro, I’m dying already,” the affidavit states.
He was able to call 911 before one of the men grabbed it from him and threw it, police said.
A neighbor who heard the commotion went outside to check on the victim, and the men ran away, the affidavit states.
Montez, however, said the altercation started when the victim tried to rob him, according to investigators.
Montez said the victim made him drive to his home and threatened him with a knife. He also said the victim accidentally stabbed himself with the knife during the tussle, the affidavit states.
Montez told police that he tried to wipe blood off his car when he returned home. Police noted that dried blood was seen in various spots on the exterior of the car, and it “appeared that someone tried to wipe it as it appeared to be smeared.”
The car also had scratch marks on the hood, the affidavit states.
A search warrant was completed at Montez’s home, and officers found bloody clothes, a knife, a handgun, and two towels with DNA evidence, police said.
At this time it is unknown if Montez’s relative will face charges in the incident.
Montez was booked on Thursday and his bond is set at $85,000, records show.
Read also:
Copyright 2022 by KSAT – All rights reserved.
Rebecca Salinas joined KSAT in the fall of 2019. Her skills include content management, engagement and reporting.
email
twitter
If you need help with the Public File, call 210-351-1241.
Copyright © 2022 KSAT.com is managed by Graham Digital and published by Graham Media Group, a division of Graham Holdings.
Amazon launches QVC-style livestream shopping in India – TechCrunch
Amazon has launched QVC-style livestream shopping in India, the company said Friday, broadening its offerings in the key overseas market where it has deployed over $6.5 billion to win customers.
The retail group has rolled out the new service, called Amazon Live, bringing an army of more than 150 creators to host livestreams and plug products in the videos. The idea is, influencers, with already a large following, will drive their fans to the shopping app and influence them into buying products. They get a cut each time they are able to make a sale.
Amazon Live is currently hosting livestreams across several categories, including electronics, fashion and beauty, and home decor. The videos were averaging 30 to 600 simultaneous views at the time of publication. The company says it will run 15 livestreams a day between 10 am to 1 am. During the company’s ongoing festive sale, it expects to stream over 450 hours of content.
The launch follows Walmart-owned Flipkart, Amazon’s chief rival in India, also testing a similar offering on its app early this year. Amazon itself quietly launched Live in the U.S. in 2019, attempting to get a slice of a nascent shopping trend made popular by YouTube, TikTok and Instagram.
The live content on Amazon will include streams from mainstream celebrities including Bollywood actor Parineeti Chopra and Indian badminton player Pusarla Venkata Sindhu (PV Sindhu). Other than offering livestreams, Amazon Live will allow customers to communicate directly with influencers through comments. This brings the requirement of moderation — to avoid instances of abuse and hatred.
Kishore Thota, director, Customer Experience & Marketing, Amazon India, told TechCrunch in an interview that the company wants to bring different “thought leaders” in particular spaces. “Even if we take like what we call celebrities, we look at topics where they are respected for their thought leadership in that space. So, the movie celebrity could be there but it’s not just because there are movie celebrities, they are movie celebrities but probably they know really well about dressing for a special event,” he said.
Live shopping originally gained traction in China, where many influencers consistently sell items worth millions of dollars in a single broadcast. Austin Li, a popular influencer, sells more than $1 billion worth of goods in a session.
But whether the model will work in India remains a big question.
In the meantime, New Delhi is preparing to tighten rules to root out fake and paid reviews of products on e-commerce websites and social media platforms. A framework of regulations targeting people who endorse merchandise will soon be released, the government has said. Amazon said it will always make sure it is compliant with local laws.
Amazon Live section on the Indian shopping app. Image Credits: TechCrunch screen capture
Amazon Live section on the Indian shopping app. Image Credits: TechCrunch screen capture
On an FAQ page, Amazon has identified the influencer program as an extension of its Amazon Associates (affiliate) program. The company requires these influencers to have an account with YouTube, Instagram, TikTok or Facebook to qualify.
Thota said that Amazon uses its existing moderation techniques, including machine learning algorithms, to eliminate foul language in real time. Although Amazon will be able to attract customers to buy new products through its live commerce experience, Thota said the company is currently not paying any emphasis to the sales side of the move and focusing primarily on getting more customer engagements through live streams.
Influencers have a significant role in what they want to talk about during their streams, he said. He, though, mentioned that sellers could transform into big influencers on the platform over time. “We will work towards it as well to make it as prevalent with small businesses, individual sellers and really empower individuals with the best knowledge of that product in that space to become the influencer in this context,” he said.
Amazon is lagging Flipkart in India on several key metrics and struggling to make inroads in smaller Indian cities and towns, according to a recent report by investment firm Sanford C. Bernstein. Amazon has so far offered “a weaker proposition in ‘new’ commerce” in the country, the report added, pointing to innovations by Flipkart and unicorn social commerce platforms Meesho and DealShare.
At stake is one of the world’s last great growth markets. The e-commerce spending in India, the world’s second-largest internet market, is expected to double in size to over $130 billion by 2025.
‘Amazon Live’ is the retailer’s latest effort to take on QVC with live-streamed video
YouTube acquires Indian social commerce startup Simsim
The story was updated with official comments from Amazon.
Stevie Nicks + Eddie Vedder Play 'Stop Draggin' My Heart Around' – Ultimate Classic Rock
Stevie Nicks and Eddie Vedder joined forces Friday night to perform Nicks' Tom Petty collaboration "Stop Draggin' My Heart Around" during her headlining performance at Vedder's Ohana Festival. You can see video of the performance below.
More than 40 years after its release, the story of "Stop Draggin' My Heart Around" has been well documented. Producer Jimmy Iovine reportedly didn't think Nicks' 1981 solo debut, Bella Donna, had a hit single. Iovine also worked with Tom Petty and the Heartbreakers, so he asked the bandleader to lend Nicks a song for her LP.
The gambit paid off, as "Stop Draggin' My Heart Around" shot to No. 3 on the Billboard Hot 100 and propelled Bella Donna to multiplatinum status, while also solidifying a lifelong friendship between Nicks and Petty.
Nicks told the audience this story before beginning the song at Ohana Festival. "'We recorded it, it's ready to go, he will even sing it with you,'" she recalled a member of Petty's team (likely Iovine) telling her. "'So he's gonna give it to you, and he's gonna sing it with you.' And I said, 'Yes!' And that song kicked Bella Donna to No. 3 and then to No. 1 on the Billboard charts."
Vedder strutted onstage during the first verse to waves of applause from the crowd and proceeded to sing Petty's vocal parts. "That was sneaky Mr. Eddie Vedder!" Nicks said after the performance.
The Pearl Jam frontman is set to perform his own headlining set on the second day of the festival, sharing top billing with Jack White. Pop star Pink will headline on Sunday.
Nicks released a cover of Buffalo Springfield's legendary protest song "For What It's Worth" last week. "I'm so excited to release my new song," she said in a statement. "It was written by Stephen Stills in 1966. It meant something to me then, and it means something to me now. I always wanted to interpret it through the eyes of a woman – and it seems like today, in the times that we live in, that it has a lot to say."
What’s the future of Bardstown Road? Louisville set to devise a master plan – 89.3 WFPL News Louisville
With funding now in place, Louisville officials are set to create a master plan for Bardstown Road. It’ll be the first comprehensive plan for the iconic business and nightlife district in modern history.
Metro Council approved $25,000 last week to cover half the cost of developing a master plan. Louisville Metro’s Office of Advanced Planning and Sustainability is expected to match the appropriation and contract with a third-party consultant to handle design and coordinate public meetings.
The initial $25,000 came out of funds earmarked for District 8, which includes much of the Highlands and many of the most densely populated parts of Bardstown Road. District 8 Council Member Cassie Chambers Armstrong said Bardstown Road is one of the city’s liveliest and most profitable business districts, but there needs to be a plan to continue building off that success.
“We have access to some of the best parks in the entire city, but yet we haven’t thought about how to connect those parks to each other and Bardstown Road,” she said. “We have an area that has one of the greatest potentials to be walkable because we have such a great housing density, but we haven’t thought long-term about how we actually make it so that people really can get to where they need to go.”
Chambers Armstrong said the idea for a master plan came out of conversations with residents and business owners about the Bardstown Road redesign currently underway. She said there’s a number of planning documents for individual neighborhoods surrounding the corridor, but nothing that looks at the area cohesively.
“Bardstown Road is unique in that it is this backbone that connects a whole bunch of neighborhoods and small cities, but it’s also become this kind of dividing line between neighborhoods where people identify themselves as being on one side or the other,” Chambers Armstrong said.
What exactly the master plan will cover is still to be determined. City officials will have to decide whether the plan should include zoning, road improvements, new public spaces or all of the above.
But that doesn’t mean residents and community groups aren’t already thinking about a long-term vision for the district.
Jackie Cobb is president of Friends of Bardstown Road, a collaborative group of business owners and nearby residents. Cobb said most of their work to date has focused on pedestrian safety measures that are part of the redesign the Kentucky Transportation Cabinet is managing.
While the first phase is focused on the section of Bardstown Road between its intersections with Broadway to the north and Eastern Parkway to the south, there are plans to eventually take the redesign all the way to the Watterson Expressway.
“There has been a neighborhood commentary about, ‘Hey, we see what’s happening up on the north end, but what about where we live,’” Cobb said. “So, the master plan is an opportunity to inform this coming next phase of the Bardstown Road redesign and repave.”
While the community will have the opportunity to drive the planning process through public meetings, Cobb said she has her own list of improvements she hopes will be discussed.
“I think there’s potential in this master planning process to address not only the addition of some public spaces like pocket parks or plazas along Bardstown Road, but also more greenspace in addition to street trees,” she said.
Gathering the public’s input on the future of the Bardstown Road corridor won’t get underway until 2023.
Michael King, director of Louisville Metro’s Department of Advanced Planning and Sustainability, said the city is hoping to put out an RFP, or request for proposals, early next year. The RFP will outline the scope of the project, and private firms with master plan experience will then bid on the contract.
King said unlike the Bardstown Road/Baxter Avenue Overlay District, which focuses mainly on having consistent design features, the master plan will likely look more at “creating a sense of place along the corridor.”
“Nothing has really — at least in recent history — has looked at the land use or the opportunity to green the corridor, looked at public art along the corridor, whatever those kinds of placemaking solutions might be,” he said. “That’s the real intent of this plan.”
King said the master planning process will start with an existing needs assessment before moving on to public engagement. The final document will look at short-term improvements, as well as more expensive, longer-term goals over the next decade or so. The fun part, he said, will be finding the funding to realize the community’s vision.
This Month In Tech History: October – Review Geek
Join 350,000 subscribers and get a daily digest of news, articles, and more.
By submitting your email, you agree to the Terms of Use and Privacy Policy.
Danny has been a technology journalist since 2008. He served as senior writer, as well as multimedia and home improvement editor at Top Ten Reviews until 2019. Since then, he has been a freelance contributor to Lifewire and ghostwriter for Fit Small Business. His work has also appeared on Laptop Mag, Tom’s Guide, and business.com. Read more…
The history of technology in October sees the dawn of the age of the personal automobile, the unintended beginnings of video gaming, the release of the classic MP3 player that changed everything, and even the formal definition of the internet. Read on for all the details.
October 1, 1908: Ford Model T Goes On Sale
October 1, 1982: Sony Releases First CD Player
October 8, 1992: Apple Settles Second Lawsuit with ‘The Beatles’
October 12, 1988: Steve Jobs Introduces NeXT Computer
October 18, 1958: World’s First Video Game
October 23, 2001: iPod Released
October 24, 1995: ‘Internet’ Defined
October 30th, 1938: Orson Wells Broadcasts The War of The Worlds
Today, it’s hard to imagine a world without personal vehicles. But, at the start of the 20th century, most people still got around by foot, horse, boat, buggy, or train. And even though manufacturers had been producing automobiles since the 1880s, and Ford itself had been making them since 1903, the Ford Model T was the first personal motorcar to be affordable to middle-class Americans.
The Model T was also the first car Ford mass-produced on a moving assembly line, an innovation unto itself. However, the company didn’t incorporate the production process until 1913. Once implemented, the assembly line reduced Model T manufacturing time from over 12 hours to just an hour and a half, with a Model T rolling off the line every three minutes. The moving assembly line manufacturing process became the standard for the vast majority of the automobile industry.
With over 15 million cars produced between 1908 and 1927, the Model T was an immense commercial success. It also normalized the concept of a personal-use vehicle for regular people. It was the most-sold car in history until 1972, when the German-made Volkswagen Beetle eclipsed it. In 1999 the Model T won the Car of the Century award by the Global Automotive Elections Foundation.
Optical media may seem like retro tech today, but in the early ’80s, it was cutting-edge stuff. When Sony released the first CD player, the Sony CDP-101, in 1982, no CDs existed to play on it. The same day, Billy Joel’s album 52nd Street was reissued on compact disc, making it the first commercially released music album in that format.
The launch of the CDP-101 was a Japan-only release because their Western business partner, Philips, couldn’t meet the deadline. The Dutch company launched the Philips CD-100 just a month later. But neither product would reach U.S. store shelves until early 1983. The devices sold at about $1,000, and at first, only about 20 albums were available to play on them.
Adoption of the new technology was slow at first. But by 1988, CDs were outselling vinyl records, and by 1991 had eclipsed cassette tape sales. The CD format would remain the top format for music consumption until 2005 when the iPod and the iTunes Music Store dethroned it.
Throughout its history, Apple has been involved in many high-profile lawsuits. One of its long-standing legal adversaries was Apple Corps, the holding company formed by The Beatles. In 1978 Apple Corps filed suit against the computer company for trademark infringement. The companies settled out of court in 1981, with Apple Computer agreeing not to enter into the music business, and Apple Records (Apple Corps music division) would stay out of the computer market.
However, the truce didn’t last long. In 1986, Apple Computer built a MIDI (Musical Instrument Digital Interface) and audio-recording components into their Mac computer line. According to Apple Corps, this violated the 1981 agreement and sued Apple Computer again in 1989. The companies settled out of court again in October 1991, with Apple Computer paying Apple Corps 26.5 million dollars and promising never to sell or distribute physical musical media.
The 1991 agreement endured the rest of the 20th century. But, the launch of the iTunes Music Store changed everything in 2003. Apple Corps alleged that the computer company selling digital music was a breach of contract. This time the battle wouldn’t be settled outside the courtroom. After three years, an English judge ruled that Apple Computer did not violate the 1991 settlement.
It wouldn’t be until 2010 that Apple Corps would allow The Beatles‘ music library to be sold through the iTunes Music Store.
When Steve Jobs resigned from Apple in 1985, he didn’t waste any time before establishing a new computer company: NeXT. With funding from the future U.S. presidential candidate Ross Perot, Jobs led the development of the NeXT Computer, a high-end workstation aimed at the higher-education market.
In his typical fashion, Jobs made the launch of the NeXT Computer a multimedia event. However, the NeXT Introduction served not only as a launching pad for a new computer but also as a triumphal re-entry onto the public stage for Jobs. In his own words at the proto-Stevenote, “It’s great to be back.”
The NeXT Computer never achieved the enormous sales numbers as Job’s crowning achievement, the Macintosh. This is likely due to its astronomical price tag of $6,500–the equivalent of $14,000 in 2021. But it did serve several critical roles. Chief among them was the NeXT machine used as the world’s first web server at CERN.
Unfortunately, the NeXT Computer couldn’t keep Jobs’s new company in the hardware business. The firm shifted its focus to software in 1993 and developed the NeXT operating system for porting to third-party software. Apple acquired NeXT four years later, seeing Jobs return to the company he founded in 1976.
When William Higinbotham designed Tennis for Two, he didn’t know he was making the world’s first video game. Higinbotham intended to entertain the attendees of the Brookhaven National Laboratory’s annual public exhibition. Most exhibition items were for scientific instruments like a pulse height analyzer and electronic counters. Higinbotham later said he wanted to “liven up the place” with a game for people to play.
Higinbotham designed the game within just a few hours after learning that the laboratory’s Donner Model 30 analog computer could simulate an object’s trajectory along with wind resistance. He spent the next three weeks with technician Robert V. Dvorak building the game’s physical components, which consisted of an oscilloscope for the display and two aluminum controllers. The game consisted of a simple horizontal line representing the tennis court with a vertical line in the center for the net. The ball would be paddled back and forth between the players, using the controller’s knob to angle the shot and the button to hit the ball.
Tennis for Two was a smash hit at the exhibition, particularly on the day designated for high school students. The line to play the first video game reached into the hundreds. It was so popular that the laboratory upgraded Tennis for Two for the following year’s exhibition. The game received a larger screen, and simulations that incorporated the gravity of the Moon and Jupiter were added.
The game didn’t receive any accolades outside the exhibition at the time. It wasn’t until nearly 20 years later that lawyers discovered and used it as a defense in a video game patent lawsuit. The press surrounding the case led to its recognition as the first video game produced solely for entertainment purposes.
Apple is rarely the first to market with new technology. What the company does well is to develop existing technology into a form that dominates the market. Such is the case with the iPod. MP3 players had been a common part of the digital landscape for years before Apple announced the iPod in 2001. But Steve Jobs found the existing technology lacking and ordered his engineering chief to hire Tony Fadell, who had been pitching an improved MP3 player to various technology companies such as Sony and Philips.
Working as an independent contractor, Fadell recruited former coworkers from his previous employers, General Magic and Philips, to help him build the iPod. Within eight months, Fadell and crew had a prototype to show Apple. The first iPod had 5GB of hard drive storage capacity, a monochrome LCD display, and its click wheel was raised with physical buttons. A far cry from where the iPod ended in 2022 as a smartphone-style device with up to 256GB of storage, a four-inch multi-touch display, and the ability to run apps just like the iPhone.
When Steve Jobs announced the iPod at a special Apple event in October 2001, it revolutionized how the world consumed music. The company sold 125,000 units of the MP3 player by the end of the year. It took two years for the company to ship a million iPods. But growth was exponential after that. By 2007 Apple sold more than 100 million iPods.
Of course, after the introduction of the iPhone, iPod sales began to dwindle because people didn’t need a separate MP3 player and a smartphone. Nevertheless, the line continued on as the iPod touch until 2022.
In the days of the early internet, the United States government had to cope with multiple world-changing technologies springing up at once. Several federal agencies, including Defense Department, Energy Department, National Science Foundation, and NASA, informally established the Federal Networking Council as a forum for network collaborations. And to help the agencies meet their research, education, and operational mission goals. As well as bridge the
The National Science and Technology Council’s Committee on Computing, Information, and Communications (CCIC) formally chartered the group on September 20th, 1995. In one of their first acts as an official organization, the council unanimously passed a resolution defining the term “Internet” for federal agencies.
According to the resolution, “Internet” refers to the global information system that:
The internet definition was the Federal Networking Council’s only claim to fame. When the organization’s charter came up for review in 1997, it was disbanded, and its duties were handed off to other government bureaucracies.
Alien invasions have been a staple of science fiction for as long as the genre has existed. However, there weren’t as many sci-fi fans in the late 1930s as there are today. When Orson Wells broadcast his radio adaptation of the classic H.G. Wells novel, The War of the Worlds, the general public didn’t know it was all pretend.
When the legendary filmmaker announced at the top of the program that what was to come was just a radio drama, many listeners would miss it because they were tuned into The Mercury Theater on the Air on another network.
Wells formatted the radio adaptation of The War of the Words to sound as though it were an actual news broadcast, depicting a Martian invasion of the small town of Grover’s Mill, New Jersey. There was mass panic when the public heard the reports of military engagements with giant Martian war machines. Historians dispute the extent of the panic. However, it was bad enough that CBS ordered the program interrupted to reassure the listeners that it was a fictional presentation.
Facebook
Twitter
Instagram
LinkedIn
RSS Feed
The Best Free Tech Newsletter Anywhere
By submitting your email, you agree to the Terms of Use and Privacy Policy.
Strictly conformal transformation optics for directivity enhancement and unidirectional cloaking of a cylindrical wire antenna | Scientific Reports – Nature.com
Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 16278 (2022)
68
Metrics details
Using conformal transformation optics, a cylindrical shell made of an isotropic refractive index material is designed to improve the directivity of a wire antenna while making it unidirectionally invisible. If the incident wave comes from a specific direction, it is guided around the wire. Furthermore, when an electrical current is used to excite the wire, the dielectric shell transforms the radiated wave into two lateral beams, improving directivity. The refractive index of the dielectric shell is calculated using the transformation optics recipe after establishing a closed-form conformal mapping between an annulus and a circle with a slit. The refractive index is then modified and discretized using a hexagonal lattice. Ray-tracing and full-wave simulations with COMSOL Multiphysics are used to validate the functionality of the proposed shell.
Since Leonhardt and Pendry discovered a transformation-optical solution for the problem of invisibility1,2, the theory of transformation optics (TO) has caught the interest of scientists. TO recipe incorporates a geometrical interpretation of the device’s function into a calculated material. This theory allowed researchers to derive the material that could realize a specific functionality, essentially an inverse problem. Many fabulous devices have been created using this theory like field rotators3,4,5, field concentrators6,7, carpet cloaks8,9,10,11,12,13,14,15,16, polarization splitters4,17,18,19,20, beam expanders and squeezers21,22, directivity enhancers23,24,25,26,27,28,29, and waveguide couplers30,31,32,33,34,35,36,37. TO has also been used for compressing lenses38,39,40,41,42,43.
Despite being an interesting systematic approach and providing a mathematical path for the design of functional devices, the material calculated by TO is often difficult to realize. In general, the constitutive parameters can possess extreme permittivity and permeability values and a high degree of anisotropy. Attaining anisotropy is quite challenging since the available natural materials exhibit low anisotropy levels. Metamaterial unit cells can provide higher anisotropy at the expense of introducing loss and limiting the bandwidth. The type of transformation used has a significant impact on material complexity. For instance, linear transformations result in a homogeneous anisotropic medium12,15,18,19,30,31,33,44,45, whereas using quasi-conformal and conformal transformations minimizes and eliminates the anisotropy, respectively1,8,23,24,25,26,27,28,29,35,41,46,47,48.
For the case of an omnidirectional cloak, the medium possesses singular constitutive parameters near the concealment region2. The singularity embedded in omnidirectional cloaks stems from using a point-transformed mapping in 3D and a line-transformed mapping in 2D. As a result, a new class of unidirectional invisibility cloaks was introduced, capable of providing invisibility for one incident angle. The mapping is plane-transformed for such unidirectional cloaks, which can lead to material singularity mitigation. Unidirectional cloaks can be designed using linear transformations49,50,51,52, non-linear transformations49,53,54, and conformal transformations1,55,56,57,58,59,60. A cloak prototype was fabricated using metamaterial cells51 and metal 3D printing52. Employing metasurfaces for the realization of the structure is also an active area of research61,62.
On the other hand, conformal and quasi-conformal transformations have been proven to help improve the directivity of a radiating source. Researchers have demonstrated that they can flatten the phase fronts of the cylindrical wave emanating from a point source by using (quasi-) conformal mappings23,24,25,26. Following a similar approach, a conformal transformation was numerically calculated to minimize the phase error at the horn antenna aperture, leading to a directive beam27,28,63.
An interesting TO application is the case of a bi-functional device that provides both unidirectional cloaking and directivity enhancement. Recently, an anisotropic solution was proposed by numerically solving Laplace’s equation64. The designed metamaterial shell could cloak the wire antenna for an incident TM wave and enhance the directivity of the wire antenna that emanated TE waves. The same research group recently proposed an isotropic solution using numerical quasi-conformal transformation65. The resulting isotropic magnetic transformation medium could be used to unidirectionally cloak the loop antenna in the presence of an incident TM wave and to enhance the directivity of the antenna. Since the incident wave and the radiating wave from the loop antenna were TM polarized, an isotropic magnetic material was used. The magnetic medium was realized using printed SRR and meander line structures, limiting the bandwidth.
The most well-known method for deriving the quasi-conformal mapping between physical and virtual spaces is to solve Laplace’s equation with proper Dirichlet and Neumann boundary conditions. The level of anisotropy neglected by pursuing this method is proportional to the conformal module mismatch between the two spaces. If the difference between the conformal modules of two spaces is significant, the transformation calculated by numerically solving Laplace’s equation will deviate from being quasi-conformal. In such cases, using the strictly conformal TO formula is questionable, both mathematically and physically. In the case of carpet cloaks, for example, even a minor conformal module mismatch has been shown to cause a lateral shift11. For the device providing unidirectional cloaking and directivity enhancement, the boundary condition associated with the numerical method procedure does not lead to conformal module matching65. As the radius of the concealment region increases, the conformal module mismatch increases, and numerical calculation alone can not remedy this defect. A strictly conformal transformation can fix this issue, leading to a purely conformal solution.
A closed-form, strictly conformal map between the doubly connected physical and virtual spaces is established here, leading to a perfect conformal module match. The resulting isotropic dielectric shell cloaks the wire antenna from an impinging TM wave and enhances the wire antennas’s directivity. Unidirectional invisibility is obtained by keeping the outer boundary of virtual and physical space alike and mapping the inner cylindrical wire to a slit. The latter also bilaterally improves the directivity. The refractive index is then modified and discretized to investigate the practicality of the device. The device’s unidirectional cloaking property is discussed from two distinct perspectives in the “Discussion” section. Ray-tracing and full-wave simulations are carried out using COMSOL to confirm the device’s functionality.
Here, the virtual and physical spaces are related to each other by a conformal map. The virtual and physical spaces are denoted by the w-plane, which has Cartesian coordinates of (u, v), and the z-plane, which has Cartesian coordinates of (x, y). Assuming the complex variables (w=u+mathrm{i}v) and (z=x+mathrm{i}y), the conformal mapping from the physical space to the virtual space is expressed by the analytic function (w=f(z)). In such a scenario, if the virtual space is filled with the refractive index of n(u, v), the refractive index of the physical space is derived using the following well-known TO formula1:
where n(u, v) is the refractive index of the virtual space. Here, the refractive index of (n(u,v)=1) is assumed.
Figure 1 depicts the schematics of virtual and physical spaces. An annulus with the inner radius of (rho) and the outer radius of one in the physical space is mapped to the doubly connected circular virtual space furnished with a slit (- L le w le L) along the u-axis.
Schematics of the (a) physical space, and (b) virtual space for the directivity enhancement and cloaking of a cylindrical wire antenna.
For the case of 2D simply connected shapes, Riemann’s mapping theorem implies that one can find a conformal mapping between two desired non-empty shapes. This theorem has been the critical factor for all transformation-optical researchers that employ conformal mappings. However, for the conformal mapping of 2D doubly connected regions, there exists another exciting theorem. After adapting the theorem to our case, it reads: “let D be a non-degenerate doubly connected region, then there exists a unique real number (rho), (0< rho < 1), such that there exists a one-to-one analytic function f(z) that maps the annulus (R_u): (rho< left| z right| < 1) onto D. If the outer boundaries correspond to each other, then f(z) is determined up to a rotation of the annulus”. The unique value ({rho ^{ – 1}}) is referred to as the conformal modulus of D66. This means that for a given doubly connected virtual space, there exists a unique annulus with a specified inner radius of (rho) and an outer radius of 1.
There are four critical points to note regarding the configuration in Fig. 1:
The continuity of the transformation at the outer rim is sufficient to achieve the reflectionless property at the outer contour67. Hence, the outer boundary of both physical and virtual spaces is chosen alike. In the “Discussion” section, this point is discussed in greater detail.
There are two main options to improve the directivity of a cylindrical wire. Either one should map the outer contour of the virtual space to a square or a rectangle in the physical space, which is in contrast with the invisibility requirement, or one can transform the inner cylindrical wire in the physical space into a slit in the virtual space. An observer from the outside will perceive the electrical current placed on the inner cylinder of physical space as an electrical current excited on a slit. As a result, the directivity is enhanced since an electrical current excited on a slit radiates mainly along the direction normal to the slit, leading to two directive beams.
Based on the first and second points, the outside observer looking along the x-axis sees the perfect electric conductor (PEC) cylinder as the PEC slit. If the wave’s polarization is TM (magnetic field along the z-axis), the slit (or wire) will not disturb the incident TM wave and will eventually become invisible. Hence unidirectional cloaking can be achieved for the TM polarization. In the case of TE polarization (electric field along the z-axis), a perfect magnetic conductor (PMC) cylinder achieves invisibility55.
The shell is designed to increase the wire’s directivity, which emits TE polarized waves when excited by an electrical current. The dielectric medium designed by conformal transformation for this polarization is entirely efficient. However, for cloaking, TM polarization is involved. Conformal mapping results in a fully magnetic medium for this polarization, and obtaining a wideband magnetic response is difficult65. Although, if the structure’s size is electrically large, as it is in the geometrical optics (GO) regime, the dielectric medium designed based on the TE assumption works well for TM68.
It is worth noting that the propagation direction that the cylindrical wire is invisible for (along the x-axis) is perpendicular to the direction of the directivity enhancement (along the (pm y)-axis) in our configuration.
A direct calculation of the mapping depicted in Fig. 1 is not possible. The mapping should be calculated by splitting the problem into a collection of conformal transformations. In this process, some preliminary conformal maps should be introduced. The fundamental analytic functions employed in the following calculations are available in the conformal mapping handbooks69,70.
The conformal map from a rectangle to the upper half-space is introduced first. This mapping will be used later in the process. Figure 2 depicts this case.
Schematic of the conformal mapping from a rectangle in the z-plane to the upper half of the w-plane41.
Vertices (z = pm K,mathrm{{ }} pm K + iK’) are mapped to the vertices (w = pm 1,mathrm{{ }} pm {k^{ – 1}}(0< k < 1)). Table 1 summarizes the associated vertices.
The analytic function (w = mathrm{{sn}}(z,k)) known as the elliptic sine function provides such a transformation, where k is the modulus of the elliptical integrals. K(k) and (K'(k)) are the complete and complementary complete elliptical integrals of the first with the (K'(k) = K(sqrt{1 – {k^2}})) property.
It is worth mentioning that if the modulus k is known, then the aspect ratio of the rectangle (K(k)/K'(k)) is uniquely determined, and vice versa. It is helpful to define the intermediate parameter (q = {e^{ – pi K'(k)/K(k)}}), which depends on the aspect ratio and modulus k. Modulus k can be expressed as an infinite series of q following the below formula:
The problem here is finding the analytic function (w=f(z)) that maps the interior of the physical space’s annulus (rho< left| z right| < 1) to the interior of the virtual space’s unity circle (|w| = 1), furnished with the slit (- L le w le L). Applying the symmetry principle to the unity circle (left| z right| = 1), we conclude that the analytic function (w = f(z)) also maps the annulus (rho< left| z right| < {rho ^{ – 1}}) to the entire w-plane, including the (- infty le w le – {L^{ – 1}}, – L le w le L), and ({L^{ – 1}} le w le infty) slits. Both domains have symmetry with respect to the real axis. Hence, if a mapping is found that can map the upper half of the annulus (rho< left| z right| < {rho ^{ – 1}}) to the upper half of the w-plane, it is identical with (w = f(z)) based on the symmetry principle, provided that it maps the points according to Table 2.
The procedure for finding the required conformal map is depicted in Fig. 3, where the unknown mapping is derived indirectly using two known conformal maps.
Schematic of the procedure for deriving the conformal map (w=f(z)).
The problem, by far, includes finding a transformation that maps the upper half of the annulus (rho< left| z right| < {rho ^{ – 1}}) to the upper half of the w-plane. On the other hand, the transformation from a rectangle to the upper half of the w-plane has already been derived (see Fig. 2). Hence, finding a conformal map between the rectangle and the upper half of the annulus (rho< left| z right| < {rho ^{ – 1}}) is the key to finding the solution.
The exponential function (z = irho {e^{ – ieta }}) maps the rectangular region (- pi /2< mathrm{{Re}}{ eta } < pi /2,) (0< mathrm{{Im}}{ eta } < – 2log rho) onto the upper half of the annulus (rho< left| z right| < {rho ^{ – 1}}). Table 3 summarizes the points involved in the mapping.
The vertices and their mapped counterparts in Fig. 3 are labeled with numbers according to Tables 2 and 3.
Based on Fig. 3, the analytic function (w = f(irho {e^{ – ieta }})) maps the rectangle in the (eta)-plane to the upper half of the w-plane. Based on Tables 2 and 3, the correspondence in Table 4 is established.
Comparing Tables 1 and 4, leads to the following equalities:
In conclusion, the following analytic function (w=f(z)) maps the interior of the physical space’s annulus (rho< left| z right| < 1) to the interior of the virtual space’s unity circle (|w| = 1) furnished with the slit (- L le w le L):
where the q parameter associated with the above conformal mapping is (q = {e^{ – pi K'(k)/K(k)}}=rho ^{4}) based on Eq. (3). According to Eq. (2) and the (k=L^{2}) relation, the following formula relates the half-length of the virtual space’s slit L to the inner radius of the physical space’s annulus (rho):
Following Eq. (1), the refractive index of the physical space is derived:
where cn and dn are the elliptic cosine and the delta amplitude functions, respectively.
The inverse of the mapping in Eq. (4) can be derived using the definition of the (mathrm{{s}}{mathrm{{n}}^{ – 1}}) function.
The above integral can be solved numerically or by using “InverseJacobiSN” in Mathematica71.
Here, the radius of the wire antenna equals (rho =0.1) m. The corresponding slit length of (2L=0.4) m is calculated following Eq. (5). Figure 4 depicts the Cartesian grids inside the virtual space and their mapped counterparts in the physical space. The v-constant grids representing a set of rays propagating along the u-axis in the virtual space are guided around the wire as they are mapped to the physical space. Hence, the unidirectional cloaking effect is to be expected. Furthermore, the mapped u-constant grids near the wire are perpendicular to the circumference of the wire. As a result, it is expected that rays emanating from the wire perpendicular to its boundary will be gradually focused along the (pm y) direction by the transformation medium, resulting in two directive beams. Following Eq. (6), the refractive index is calculated and illustrated in Fig. 5.
Grid transformation between the virtual and physical spaces. (a) Cartesian grids in the virtual space, and (b) the corresponding mapped ones in the physical space.
The refractive index profile of the physical space in Fig. 1a with the inner radius of (rho =0.1) m.
Ray-tracing and full-wave simulations are carried out to verify the of the device’s functionality. The ray-tracing simulations assess the response of the device in the GO regime. First, 60 parallel rays are launched along the x-axis from the left side of the simulation domain to evaluate the cloaking functionality. The results are depicted in Fig. 6a, where the color expression represents the optical path length in meters. It is seen that the rays are guided around the wire, implying that the cylindrical wire is unidirectionally invisible. To verify the directivity enhancement, 38 equally-spaced rays are generated in the direction perpendicular to the boundary of the wire. The results are illustrated in Fig. 6b, where the rays generated from the wire’s surface are gathered along the (pm y) direction by the dielectric shell. This confirms the directivity improvement as the omnidirectional pattern of the cylindrical wire changes to a pattern with two beams along the (pm y) direction.
Ray-tracing simulation of the physical space with the refractive index depicted in Fig. 5. (a) The cloaking effect for 60 parallel rays launched along the x-axis. (b) The directivity enhancement effect for 38 equally-spaced rays launched from the inner rim. The color expression presents the optical path length in meters.
The full-wave simulations are carried out at the frequency of 3 GHz. The directivity enhancement is investigated by exciting the cylindrical wire with an out-of-plane electrical current density ({J_z}). Such a current produces TE waves. The amplitude of the electric field ({E_z}) and the far-field pattern with and without the dielectric shell are depicted in Fig. 7. The directivity enhancement is seen by comparing the results with the omnidirectionally radiating bare wire.
The cylindrical wire enclosed by the refractive index profile depicted in Fig. 5 and excited by the uniform electric current density ({J_z}) at 3 GHz. (a) The amplitude of ({E_z}), and (b) the normalized far-field pattern with and without the dielectric shell.
To investigate the cloaking functionality, a TM Gaussian wave that propagates along the x-axis illuminates the structure from the left boundary. The magnetic field amplitude ({H_z}) is depicted in Fig. 8 for three cases: the bare wire, and the cases where the refractive index is realized by pure permittivity and permeability. As mentioned in “Introduction”, the pure permittivity performs similarly to the pure permeability if the structure is electrically large. However, perfect cloaking is obtained for the case where pure permeability is employed. The pure permeability case is simulated only for comparison’s sake.
The amplitude of ({H_z}) for a TM Gaussian wave illuminating the wire antenna covered with (a) no cloak, (b) a pure dielectric cloak, and (c) a pure magnetic cloak.
To bring the refractive index profile in Fig. 5 one step closer to realization, we have changed the background refractive index to 2 and replaced the below unity values with one. Figure 9 depicts the modified refractive index.
The modified refractive index profile in Fig. 5. The background refractive index is changed to 2 and the superluminal index values are replaced with a unity refractive index.
Figure 10 illustrates the ray-tracing results for the refractive index profile shown in Fig. 9, where the color expression represents the optical path length.
Ray-tracing simulation of the physical space with the refractive index depicted in Fig. 9. (a) The cloaking effect for 60 parallel rays launched along the x-axis. (b) The directivity enhancement effect for 36 equally-spaced rays launched from the inner rim. The color expression presents the optical path length in meters.
The full-wave simulation results are depicted in Fig. 11. To illuminate the structure, a TM Gaussian wave propagating along the x-axis is excited from the left boundary. The magnetic field amplitude ({H_z}) is depicted in Fig. 11a. Also, the directivity enhancement functionality is shown by exciting the cylindrical wire with an electrical current density ({J_z}). The amplitude of the electric field ({E_z}) and the far-field pattern with and without the dielectric shell are depicted in Fig. 11b,c.
Full-wave simulation results for the cylindrical wire enclosed by the refractive index depicted in Fig. 9. (a) The amplitude of ({H_z}) for a TM Gaussian wave illuminating the structure. (b) The amplitude of ({E_z}) for the wire excited by the uniform electric current density ({J_z}) at 3 GHz. (c) The normalized far-field pattern with and without the dielectric shell.
The ray-tracing and full-wave simulation results for the dielectric shell in Fig. 9 show that the device maintains its functionality after manipulating the refractive index.
Next, the discretized refractive index is examined. A hexagonal lattice is selected to effectively tessellate the refractive index profile. Figure 12a depicts the arrangement of the hexagonal cells with the side length of (L_mathrm{{Cell}}). Two cases are investigated where the side length of the hexagons (L_mathrm{{Cell}}) equals (lambda /5) and (lambda /10) for the frequency of 10 GHz. The sampling points (centers of the hexagon cells) are illustrated in Figs. 12b,c. Based on the refractive index profile and the local wavelength, both samplings are coarse near the cylindrical wire.
Discretization of refractive index profile in Fig. 9. (a) The hexagonal lattice configuration. (b) Sampling points for (L_mathrm{{Cell}}=lambda /5). (c) Sampling points for (L_mathrm{{Cell}}=lambda /10).
Full-wave simulations are carried out to compare the results of the sampled shell depicted in Figs. 12b,c, with the ones illustrated in Fig. 11a,b. Results are presented in Fig. 13.
Full-wave simulation results for the cylindrical wire enclosed by the discretized refractive index. (a) Discretized refractive index profile, (b) the amplitude of ({H_z}) for a TM Gaussian wave illuminating the structure, and (c) the amplitude of ({E_z}) for the wire excited by the uniform electric current density ({J_z}) at 3 GHz for (L_mathrm{{Cell}}=lambda /5). (d) Discretized refractive index profile, (e) the amplitude of ({H_z}) for a TM Gaussian wave illuminating the structure, and (f) the amplitude of ({E_z}) for the wire excited by the uniform electric current density ({J_z}) at 3 GHz for (L_mathrm{{Cell}}=lambda /10).
It is seen that the cloaking and the directivity enhancing properties degrade for the (L_mathrm{{Cell}}=lambda /5) case since the sampling is very coarse. However, the results obtained for the (L_mathrm{{Cell}}=lambda /10) case are almost identical to the Fig. 11a,b results where the refractive index is continuous.
It is worth investigating the perfectness of the invisibility provided by the dielectric shell. The proposed conformal map transforms the circular outer boundaries of the physical space and the virtual space to each other. This aspect contributes to maintaining the map’s continuity at the outer boundary and, as a result, avoiding reflections. However, this effect is inherently not perfect. Based on the uniqueness theorem for analytic functions, if the values of two conformal maps on a specific boundary (outer rims of both spaces) equal each other, the two conformal maps are equal (Theorem 10.39)72. It means that the perfect transformation continuity requirement for cloaking ((x’ = x,mathrm{{ }}y’ = y,mathrm{{ }}z’ = z)), forces the conformal map to be a unity transformation, which is not intended. In fact, if the radial and angular coordinates of the virtual and physical spaces are denoted as ((R,psi )) and ((r,phi )), the conformal mapping provided in Eq. (4) only ensures the perfect equality of the radial components at the outer contour ((R=r)). Due to the uniqueness theorem, the angular components can not be equal simultaneously ((psi ne phi )). As the radius of the wire increases, the angular components deviate more.
Figure 14 plots (psi) versus (phi) for the inner radius values of (rho = 0.1, 0.2), and 0.3 m. It is seen that the angular coordinate equality between the two spaces is quite good for a small inner radius value. This equality becomes increasingly absolute as (rho) converges to zero, making the physical and virtual spaces similar, representing a unity transformation.
The angular coordinate of the virtual space (psi) versus the angular coordinate of the physical space (phi) on the physical space’s outer contour for (rho = 0.1,mathrm{{ }}0.2), and 0.3 m.
This perfectness of the cloaking can be studied from a different point of view. A refractive index of one ((left| {f'(z)} right| =1)) on the outer boundary is sufficient for avoiding reflections. Here, the complex variables (z = x + iy = r{e^{ivarphi }}) and (w = f(r{e^{ivarphi }}) = u + iv = R{e^{ipsi }}) describe the physical and virtual spaces, respectively. Following Eq. (1), the refractive index formula in the polar coordinates follows the below relation:
where the subscripts denote partial derivatives and the Cauchy–Riemann conditions in polar coordinates ({u_r} = {v_varphi }/r,mathrm{{ }}{v_r} = – {u_varphi }/r) are considered. The proposed conformal mapping ensures (R=r) equality at the outer rim. Hence, the refractive index at the exterior border of the cloak ((R=r=1)) equals (sqrt{R_r^2 + psi _r^2}) or (sqrt{R_varphi ^2 + psi _varphi ^2}) equivalently. Figure 15 plots the refractive index of the physical space’s outer contour for the inner radius values of (rho = 0.1, 0.2), and 0.3 m. It is seen that the refractive index begins to deviate from unity as the inner radius increases.
The refractive index of the physical space’s outer contour versus (phi) for (rho = 0.1,mathrm{{ }}0.2), and 0.3 m.
To verify the perfectness of the unidirectional cloaking, the structure from the simulation section is illuminated by a TM Gaussian wave that propagates along the x-axis. The refractive index is realized by a pure permeability to eliminate any imperfection from using a pure dielectric material for the TM wave. Figure 16 shows the results for the cases in which the inner radius values of (rho =0.2), and 0.3 m are chosen, resulting in excellent cloaking. The case with the inner radius of (rho =0.1) m has already been depicted in Fig. 8c.
A TM Gaussian wave illuminates the wire antenna enclosed by a pure magnetic cloak. (a) (rho =0.2) m, and (b) (rho =0.3) m.
It’s also worth looking into the Zhukovsky mapping56. The Zhukovsky transformation (w = f(z) = z + {rho ^2}/z) maps the inner wire with the radius of (rho) in the physical space to a slit with the half-length of (L = 2rho) in the virtual space. In addition, the outer contour of physical space (|z| = 1) is mapped to an ellipse with major and minor axes equal to (1 + {rho ^2}) and (1 – {rho ^2}), respectively. As (rho) increases, the physical space’s circular outer boundary transforms into an ellipse in the virtual space with a larger axial ratio. Hence, the outer boundaries of physical and virtual spaces become less similar.
Comparing the slit half-length for the Zhukovsky case (L = 2rho) with Eq. (5), it is clear that Eq. (5) contains an additional product series term. The value of the series decreases as (rho) increases, and it approaches one as (rho) approaches zero. In conclusion, for the mapping problem depicted in Fig. 1, the conformal mapping of Eq. (4) converges to the Zhukovsky mapping for very small values of (rho).
As the theory implies and as seen in the cases of the Zhukovsky mapping and the conformal mapping presented in Eq. (4), for a specific doubly connected physical space (annulus shape in this work), there exists a unique value for the slit length embedded in the virtual space. The value of slit length is directly related to the conformal module of the physical space ({rho ^{ – 1}}). The numerical method presented in the literature employs Dirichlet and Neumann boundary conditions on the physical space’s inner and outer boundaries to ensure the continuity of the transformation on the outer rim and the orthogonality of the meshes65. However, the boundary conditions cannot establish any correspondence between ({rho ^{ – 1}}) and the slit length. The method presented in the literature offers no solution for conformal module matching. As a result, as the radius of the wire increases, the numerically calculated transformation deviates substantially from being conformal.
The doubly connected annulus in the physical space is mapped to a circle furnished with a slit using a closed-form, strictly conformal map. Such a mapping provides unidirectional cloaking while improving the directivity of a cylindrical wire antenna. The conformal mapping leads to an isotropic dielectric material. Both ray-tracing and full-wave simulations confirm the proposed design method.
The datasets used and/or analysed during the current study available from the corresponding author on reasonable request.
Leonhardt, U. Optical conformal mapping. Science 312, 1777–1780. https://doi.org/10.1126/science.1126493 (2006).
ADS MathSciNet CAS Article PubMed MATH Google Scholar
Pendry, J. B. Controlling electromagnetic fields. Science 312, 1780–1782. https://doi.org/10.1126/science.1125907 (2006).
ADS MathSciNet CAS Article PubMed MATH Google Scholar
Chen, H. & Chan, C. T. Transformation media that rotate electromagnetic fields. Appl. Phys. Lett. 90, 241105. https://doi.org/10.1063/1.2748302 (2007).
ADS CAS Article Google Scholar
Kwon, D.-H. & Werner, D. H. Polarization splitter and polarization rotator designs based on transformation optics. Opt. Express 16, 18731–18738. https://doi.org/10.1364/oe.16.018731 (2008).
ADS Article PubMed Google Scholar
Chen, H. et al. Design and experimental realization of a broadband transformation media field rotator at microwave frequencies. Phys. Rev. Lett. 102, 183903. https://doi.org/10.1103/physrevlett.102.183903 (2009).
ADS Article PubMed Google Scholar
Rahm, M. et al. Design of electromagnetic cloaks and concentrators using form-invariant coordinate transformations of maxwell’s equations. Photonics Nanostruct. Fundam. Appl. 6, 87–95. https://doi.org/10.1016/j.photonics.2007.07.013 (2008).
ADS Article Google Scholar
Sadeghi, M. M., Xu, L., Nadgaran, H. & Chen, H. Optical concentrators with simple layered designs. Sci. Rep. 5, 11015. https://doi.org/10.1038/srep11015 (2015).
ADS Article PubMed PubMed Central Google Scholar
Li, J. & Pendry, J. B. Hiding under the carpet: A new strategy for cloaking. Phys. Rev. Lett. 101, 203901. https://doi.org/10.1103/physrevlett.101.203901 (2008).
ADS Article PubMed Google Scholar
Liu, R. et al. Broadband ground-plane cloak. Science 323, 366–369. https://doi.org/10.1126/science.1166949 (2009).
ADS CAS Article PubMed Google Scholar
Ma, H. F. & Cui, T. J. Three-dimensional broadband ground-plane cloak made of metamaterials. Nat. Commun. 1, 21. https://doi.org/10.1038/ncomms1023 (2010).
ADS CAS Article PubMed Google Scholar
Zhang, B., Chan, T. & Wu, B.-I. Lateral shift makes a ground-plane cloak detectable. Phys. Rev. Lett. 104, 233903. https://doi.org/10.1103/physrevlett.104.233903 (2010).
ADS Article PubMed Google Scholar
Chen, X. et al. Macroscopic invisibility cloaking of visible light. Nat. Commun. 2, 1–6. https://doi.org/10.1038/ncomms1176 (2011).
ADS CAS Article Google Scholar
Kadic, M. et al. Transformation plasmonics. Nanophotonics 1, 51–64. https://doi.org/10.1515/nanoph-2012-0011 (2012).
ADS Article Google Scholar
Liu, Y., Zentgraf, T., Bartal, G. & Zhang, X. Transformational plasmon optics. Nano Lett. 10, 1991–1997. https://doi.org/10.1021/nl1008019 (2010).
ADS CAS Article PubMed Google Scholar
Wang, S.-Y., Liu, S.-B., Guo, Y.-N. & Ghen, C. A v-shaped cavity camouflage coating. Opt. Laser Technol. 45, 666–670. https://doi.org/10.1016/j.optlastec.2012.05.014 (2013).
ADS CAS Article Google Scholar
Eskandari, H. & Tyc, T. Controlling refractive index of transformation-optics devices via optical path rescaling. Sci. Rep.https://doi.org/10.1038/s41598-019-54516-0 (2019).
Article PubMed PubMed Central Google Scholar
Mousavi, S. S. S., Majedi, M. S. & Eskandari, H. Design and simulation of polarization transformers using transformation electromagnetics. Optik 130, 1099–1106. https://doi.org/10.1016/j.ijleo.2016.11.129 (2017).
ADS Article Google Scholar
Eskandari, H., Majedi, M. S. & Attari, A. R. Design of reflectionless non-magnetic homogeneous polarization splitters with minimum anisotropy based on transformation electromagnetics. J. Opt. Soc. Am. B 34, 1191–1198. https://doi.org/10.1364/josab.34.001191 (2017).
ADS CAS Article Google Scholar
Eskandari, H., Majedi, M. S. & Attari, A. R. Non-reflecting non-magnetic homogeneous polarization splitter and polarization deflector design based on transformation electromagnetics. Optik 135, 407–416. https://doi.org/10.1016/j.ijleo.2017.01.080 (2017).
ADS CAS Article Google Scholar
Eskandari, H., Attari, A. R. & Majedi, M. S. Design of polarization splitting devices with ideal transmission and anisotropy considerations. J. Opt. Soc. Am. B 35, 1585–1595. https://doi.org/10.1364/josab.35.001585 (2018).
ADS CAS Article Google Scholar
Rahm, M., Roberts, D. A., Pendry, J. B. & Smith, D. R. Transformation-optical design of adaptive beam bends and beam expanders. Opt. Express 16, 11555–11567. https://doi.org/10.1364/oe.16.011555 (2008).
ADS CAS Article PubMed Google Scholar
Emiroglu, C. D. & Kwon, D.-H. Impedance-matched three-dimensional beam expander and compressor designs via transformation optics. J. Appl. Phys. 107, 084502. https://doi.org/10.1063/1.3383057 (2010).
ADS CAS Article Google Scholar
Schmiele, M., Varma, V. S., Rockstuhl, C. & Lederer, F. Designing optical elements from isotropic materials by using transformation optics. Phys. Rev. A 81, 033837. https://doi.org/10.1103/physreva.81.033837 (2010).
ADS Article Google Scholar
Yao, K. & Jiang, X. Designing feasible optical devices via conformal mapping. J. Opt. Soc. Am. B 28, 1037–1042. https://doi.org/10.1364/josab.28.001037 (2011).
ADS CAS Article Google Scholar
Wu, Q. et al. Transformation optics inspired multibeam lens antennas for broadband directive radiation. IEEE Trans. Antennas Propag. 61, 5910–5922. https://doi.org/10.1109/tap.2013.2282905 (2013).
ADS Article Google Scholar
Ebrahimpouri, M. & Quevedo-Teruel, O. Bespoke lenses based on quasi-conformal transformation optics technique. IEEE Trans. Antennas Propag. 65, 2256–2264. https://doi.org/10.1109/tap.2017.2679494 (2017).
ADS Article Google Scholar
Aghanejad, I., Abiri, H. & Yahaghi, A. Design of high-gain lens antenna by gradient-index metamaterials using transformation optics. IEEE Trans. Antennas Propag. 60, 4074–4081. https://doi.org/10.1109/TAP.2012.2207051 (2012).
ADS MathSciNet Article MATH Google Scholar
Aghanejad, I., Abiri, H. & Yahaghi, A. High-gain planar lens antennas based on transformation optics and substrate-integrated waveguide (SIW) technology. Progress Electromagn. Res. C 68, 45–55. https://doi.org/10.2528/pierc16070807 (2016).
Article Google Scholar
Eskandari, H., Saviz, S. & Tyc, T. Directivity enhancement of a cylindrical wire antenna by a graded index dielectric shell designed using strictly conformal transformation optics. Sci. Rep.https://doi.org/10.1038/s41598-021-92200-4 (2021).
Article PubMed PubMed Central Google Scholar
Xu, H. Y., Zhang, B., Barbastathis, G. & Sun, H. D. Compact optical waveguide coupler using homogeneous uniaxial medium. J. Opt. Soc. Am. B 28, 2633–2636. https://doi.org/10.1364/josab.28.002633 (2011).
ADS CAS Article Google Scholar
Huang, L. et al. A general transformation for compact waveguide coupler by using homogeneous media. Photon. Nanostruct. Fundam. Appl. 11, 115–122. https://doi.org/10.1016/j.photonics.2012.11.003 (2013).
ADS Article Google Scholar
Chen, C. et al. A shifted waveguide connector combined with a photonic crystal filter designed by transformation optics. Opt. Laser Technol. 49, 161–165. https://doi.org/10.1016/j.optlastec.2012.12.023 (2013).
ADS Article Google Scholar
Eskandari, H., Majedi, M. S. & Attari, A. R. Reflectionless compact nonmagnetic optical waveguide coupler design based on transformation optics. Appl. Opt. 56, 5599–5606. https://doi.org/10.1364/ao.56.005599 (2017).
ADS Article PubMed Google Scholar
García-Meca, C. et al. Squeezing and expanding light without reflections via transformation optics. Opt. Express 19, 3562–3575. https://doi.org/10.1364/oe.19.003562 (2011).
ADS Article PubMed Google Scholar
Wu, Q., Turpin, J. P. & Werner, D. H. Integrated photonic systems based on transformation optics enabled gradient index devices. Light Sci. Appl. 1, e38. https://doi.org/10.1038/lsa.2012.38 (2012).
ADS CAS Article Google Scholar
Eskandari, H., Attari, A. R. & Majedi, M. S. Reflectionless design of a nonmagnetic homogeneous optical waveguide coupler based on transformation optics. J. Opt. Soc. Am. B 35, 54–60. https://doi.org/10.1364/josab.35.000054 (2017).
ADS CAS Article Google Scholar
Eskandari, H., Quevedo-Teruel, O., Attari, A. R. & Majedi, M. S. Transformation optics for perfect two-dimensional non-magnetic all-mode waveguide couplers. Opt. Mater. Express 9, 1320–1332. https://doi.org/10.1364/ome.9.001320 (2019).
ADS Article Google Scholar
Roberts, D. A., Kundtz, N. & Smith, D. R. Optical lens compression via transformation optics. Opt. Express 17, 16535–16542. https://doi.org/10.1364/oe.17.016535 (2009).
ADS CAS Article PubMed Google Scholar
Quevedo-Teruel, O. et al. Transformation optics for antennas: Why limit the bandwidth with metamaterials?. Sci. Rep. 3, 1903. https://doi.org/10.1038/srep01903 (2013).
Article PubMed PubMed Central Google Scholar
Ebrahimpouri, M. & Quevedo-Teruel, O. Ultrawideband anisotropic glide-symmetric metasurfaces. IEEE Antennas Wirel. Propag. Lett. 18, 1547–1551. https://doi.org/10.1109/lawp.2019.2922238 (2019).
ADS Article Google Scholar
Eskandari, H., Majedi, M. S., Attari, A. R. & Quevedo-Teruel, O. Elliptical generalized Maxwell fish-eye lens using conformal mapping. New J. Phys. 21, 063010. https://doi.org/10.1088/1367-2630/ab2471 (2019).
ADS CAS Article Google Scholar
Taskhiri, M. M. Axis-symmetric ellipsoidal lens antenna design with independent e and h radiation pattern beamwidth. Opt. Laser Technol. 140, 107037. https://doi.org/10.1016/j.optlastec.2021.107037 (2021).
Article Google Scholar
Kadera, P. et al. Wide-angle ceramic retroreflective luneburg lens based on quasi-conformal transformation optics for mm-wave indoor localization. IEEE Access 10, 41097–41111. https://doi.org/10.1109/access.2022.3166509 (2022).
Article Google Scholar
Xu, X. et al. Broad band invisibility cloak made of normal dielectric multilayer. Appl. Phys. Lett. 99, 154104. https://doi.org/10.1063/1.3648116 (2011).
ADS CAS Article Google Scholar
Zhang, J., Liu, L., Luo, Y., Zhang, S. & Mortensen, N. A. Homogeneous optical cloak constructed with uniform layered structures. Opt. Express 19, 8625–8631. https://doi.org/10.1364/OE.19.008625 (2011).
ADS Article PubMed Google Scholar
Landy, N. I. & Padilla, W. J. Guiding light with conformal transformations. Opt. Express 17, 14872–14879. https://doi.org/10.1364/oe.17.014872 (2009).
ADS CAS Article PubMed Google Scholar
Xu, L. & Chen, H. Conformal transformation optics. Nat. Photon. 9, 15–23. https://doi.org/10.1038/nphoton.2014.307 (2014).
ADS CAS Article Google Scholar
Chang, Z., Zhou, X., Hu, J. & Hu, G. Design method for quasi-isotropic transformation materials based on inverse laplace’s equation with sliding boundaries. Opt. Express 18, 6089–6096. https://doi.org/10.1364/oe.18.006089 (2010).
ADS CAS Article PubMed Google Scholar
Luo, Y. et al. A rigorous analysis of plane-transformed invisibility cloaks. IEEE Trans. Antennas Propag. 57, 3926–3933. https://doi.org/10.1109/TAP.2009.2027824 (2009).
ADS Article Google Scholar
Xi, S., Chen, H., Wu, B.-I. & Kong, J. A. One-directional perfect cloak created with homogeneous material. IEEE Microw. Wirel. Compon. Lett. 19, 131–133. https://doi.org/10.1109/LMWC.2009.2013677 (2009).
Article Google Scholar
Landy, N. & Smith, D. R. A full-parameter unidirectional metamaterial cloak for microwaves. Nat. Mater. 12, 25–28. https://doi.org/10.1038/nmat3476 (2013).
ADS CAS Article PubMed Google Scholar
Zheng, B. et al. Experimental realization of an extreme-parameter omnidirectional cloak. Researchhttps://doi.org/10.34133/2019/8282641 (2019).
Article PubMed PubMed Central Google Scholar
Jiang, W. X. et al. Invisibility cloak without singularity. Appl. Phys. Lett. 93, 194102. https://doi.org/10.1063/1.3026532 (2008).
ADS CAS Article Google Scholar
Jiang, W. X., Feng Ma, H., Cheng, Q. & Cui, T. J. A class of line-transformed cloaks with easily realizable constitutive parameters. J. Appl. Phys. 107, 034911. https://doi.org/10.1063/1.3294651 (2010).
ADS CAS Article Google Scholar
Ma, Y. et al. First experimental demonstration of an isotropic electromagnetic cloak with strict conformal mapping. Sci. Rep. 3, 2182. https://doi.org/10.1038/srep02182 (2013).
Article PubMed PubMed Central Google Scholar
Chen, H., Leonhardt, U. & Tyc, T. Conformal cloak for waves. Phys. Rev. A 83, 055801. https://doi.org/10.1103/PhysRevA.83.055801 (2011).
ADS CAS Article Google Scholar
Xu, L., Chen, H., Tyc, T., Xie, Y. & Cummer, S. A. Perfect conformal invisible device with feasible refractive indexes. Phys. Rev. B 93, 041406. https://doi.org/10.1103/PhysRevB.93.041406 (2016).
ADS CAS Article Google Scholar
Xu, L., Tyc, T. & Chen, H. Conformal optical devices based on geodesic lenses. Opt. Express 27, 28722–28733. https://doi.org/10.1364/OE.27.028722 (2019).
ADS Article PubMed Google Scholar
Liu, Y., Sun, F. & He, S. Omnidirectional conformal cloak without geometrical dispersion. Phys. Rev. Appl. 12, 064009. https://doi.org/10.1103/PhysRevApplied.12.064009 (2019).
ADS CAS Article Google Scholar
Wang, Z., Liu, Y., Cheng, T., Sun, F. & He, S. Designing conformal cloaks by manipulating structures directly in the physical space. Opt. Express 28, 23105–23113. https://doi.org/10.1364/OE.395358 (2020).
ADS Article PubMed Google Scholar
Zhang, K., Wang, Y., Burokur, S. N. & Wu, Q. Generating dual-polarized vortex beam by detour phase: From phase gradient metasurfaces to metagratings. IEEE Trans. Microw. Theory Tech.https://doi.org/10.1109/tmtt.2021.3075251 (2021).
Article Google Scholar
Wang, Y. et al. Perfect control of diffraction patterns with phase-gradient metasurfaces. ACS Appl. Mater. Interfaces 14, 16856–16865. https://doi.org/10.1021/acsami.2c00742 (2022).
CAS Article PubMed Google Scholar
Eskandari, H., Albadalejo-Lijarcio, J. L., Zetterstrom, O., Tyc, T. & Quevedo-Teruel, O. H-plane horn antenna with enhanced directivity using conformal transformation optics. Sci. Rep.https://doi.org/10.1038/s41598-021-93812-6 (2021).
Article PubMed PubMed Central Google Scholar
Keivaan, A., Fakheri, M. H., Abdolali, A. & Oraizi, H. Design of coating materials for cloaking and directivity enhancement of cylindrical antennas using transformation optics. IEEE Antennas Wirel. Propag. Lett. 16, 3122–3125. https://doi.org/10.1109/LAWP.2017.2764064 (2017).
ADS Article Google Scholar
Fakheri, M. H., Abdolali, A., Moradinia, Z., Oraizi, H. & Keivaan, A. Bi-functional antenna coating for cloaking and directivity enhancement made of isotropic materials. Progress Electromagn. Res. 90, 9–18. https://doi.org/10.2528/PIERM19101504 (2020).
Article Google Scholar
Henrici, P. Applied and Computational Complex Analysis, Volume 3: Discrete Fourier Analysis, Cauchy Integrals, Construction of Conformal Maps, Univalent Functions (Wiley, 1986).
MATH Google Scholar
Yan, W., Yan, M., Ruan, Z. & Qiu, M. Coordinate transformations make perfect invisibility cloaks with arbitrary shape. New J. Phys. 10, 043040. https://doi.org/10.1088/1367-2630/10/4/043040 (2008).
ADS Article Google Scholar
Zharova, N. A., Zharov, A. A. & Zharov, A. A. Conformal transformations in design of the coatings with gain-loss permittivity. Phys. Rev. A 89, 043801. https://doi.org/10.1103/physreva.89.043801 (2014).
ADS Article Google Scholar
Nehari, Z. Conformal Mapping, International Series in Pure and Applied Mathematics (McGraw-Hill, 1952).
Google Scholar
Abramowitz, M. & Stegun, I. A. (eds) Handbook of Mathematical Functions: With Formulas, Graphs, and Mathematical Tables. Dover Books on Mathematics (Dover Publications, 1965).
Google Scholar
Inc., W. R. Mathematica, Version 12.1. Champaign, IL, 2020.
Shilov, G. E. et al. Elementary Real and Complex Analysis (Courier Corporation, 1996).
Google Scholar
Download references
Department of Electrical Engineering, Ferdowsi University of Mashhad, 9177948944, Mashhad, Iran
Hossein Eskandari
You can also search for this author in PubMed Google Scholar
H.E conceived the idea, carried out the simulations, and prepared the manuscript.
Correspondence to Hossein Eskandari.
The author declares no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Eskandari, H. Strictly conformal transformation optics for directivity enhancement and unidirectional cloaking of a cylindrical wire antenna. Sci Rep 12, 16278 (2022). https://doi.org/10.1038/s41598-022-20503-1
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-20503-1
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.
'Jeopardy!' Looks To Expand Franchise With Master League – Deadline
By Lynette Rice
Senior TV Writer/TV Editor, Awards
For fans who can’t get enough of the Jeopardy! franchise, Executive Producer Michael Davies has some promising news for you.
Now that a revival of Celebrity Jeopardy! is off the ground, Davies is flirting with other off-shoots like a masters league that features the show’s winningest players, and maybe even a spinoff focused solely on sports and pop culture trivia.
“What we really need to develop is the pro-level version of the game,” Davies told the New York Times. “It seemed ridiculous to me that we have this sport where every single year we take all of our best players — we take our LeBrons and our Dwyanes — and we switch them all out.”
Davies would even like to air the masters league live. “That makes a lot of my staff nervous,” he said to the paper.
The franchise has already begun filming a Second Chance Tournament that will bring back promising contestants, as well as a revamped Tournament of Champions. There’s lots of other distractions in the works for Jeopardy! hungry viewers, like a podcast and a hall of fame for the show’s best players.
“I don’t think there’s ever really been a game show that has really listened to its fans the way that Jeopardy! is currently doing,” former contestant-turned-game show journalist Cory Anotado told the NYT.
Subscribe to Deadline Breaking News Alerts and keep your inbox happy.
Signup for Breaking News Alerts & Newsletters
Get our latest storiesin the feed of your favorite networks
We want to hear from you! Send us a tip using our annonymous form.
Sign up for our breaking news alerts
Deadline is a part of Penske Media Corporation. © 2022 Deadline Hollywood, LLC. All Rights Reserved.
I'm Not Sorry – New study delves into the minds of people who refuse to apologize – PR Web
The moral compass of unapologetic people may not always point north, but their unwillingness to say sorry could also be linked to underdeveloped emotional and social intelligence.
MONTREAL (PRWEB) September 29, 2022
History is filled with really lousy apologies. A well-known chef accused of unsavory conduct sent fans a half-hearted apology and a recipe for cinnamon rolls. An actor turned writer stole plotlines, and then when it became public, also plagiarized an apology. But what can be said of people who simply refuse to apologize at all, sincerely or not? A study by PsychTests.com looks into the personality, attitude, and behavior of people who stubbornly withhold their “mea culpa” even when they know they’ve done something wrong.
Analyzing data collected from 12,259 people who took the Emotional Intelligence Test, PsychTests’ researchers compared people who are willing to apologize after committing a transgression (“Apologizers”) and those who are not (“Defiers”).
Here’s what the results revealed:
DEFIERS ARE MORE LIKELY TO CROSS PERSONAL AND SOCIAL BOUNDARIES
DEFIERS ARE WILLING TO COMMIT ACTS OF KINDNESS, BUT LESS SO THAN APOLOGIZERS
DEFIERS TEND TO HAVE A MORE CYNICAL VIEW OF MORALITY AND PEOPLE
DEFIERS ARE MORE LIKELY TO HAVE LOWER EMOTIONAL INTELLIGENCE THAN APOLOGIZERS
PSYCHTESTS’ STUDY ALSO INDICATED THAT:
“An unwillingness to apologize says a lot about a person’s character,” explains Dr. Ilona Jerabek, president of PsychTests. “A large part of it is pride; it burns us to have to give the other person the satisfaction of being right because we believe it will make us lose face and look foolish. However, the pattern we are seeing in our study is that it’s more than just a matter of ego. People who refuse to say sorry are not only less kind to their fellow human beings, they also seem to unapologetically commit faux pas that would make most people cringe. They scoff at the idea of a moral code by defying their own principles, and some of the Defiers actually scorn the victims of transgressions rather than the transgressors themselves. So, this sense of defiance and spite appears to run deep.”
“The question remains, what compels these people to withhold apologies? Well, based on our study, emotional and social intelligence, or a lack thereof, appear to play a major role. People with high EQ are empathetic, compassionate, and both socially and self-aware, which means they are able to put themselves in other people’s shoes and understand how their actions hurt others. Defiers certainly possess the capacity for empathy, but fail to expand their awareness to the consequences of their lack of remorse. This means that unrepentant people look at apologizing from the perspective of ‘If I say sorry, how will it make me look?’ rather than trying to understand how it would benefit the other person or the relationship.”
HERE ARE SOME TIPS ON HOW TO OFFER A GENUINE APOLOGY, INSTEAD OF A HALF-HEARTED “OK…SORRY” OR “I’M SORRY, BUT…”:
What’s your EQ? Find out more about the Emotional Intelligence Test here: https://testyourself.psychtests.com/testid/3979
Professional users, such as HR managers, coaches, and therapists, can request a free demo for this or other assessments from ARCH Profile’s extensive battery: http://hrtests.archprofile.com/testdrive_gen_1
To learn more about psychological testing, download this free eBook: http://hrtests.archprofile.com/personality-tests-in-hr
About PsychTests AIM Inc.
PsychTests AIM Inc. originally appeared on the internet scene in 1996. Since its inception, it has become a pre-eminent provider of psychological assessment products and services to human resource personnel, therapists and coaches, academics, researchers and a host of other professionals around the world. PsychTests AIM Inc. staff is comprised of a dedicated team of psychologists, test developers, researchers, statisticians, writers, and artificial intelligence experts (see ARCHProfile.com).
Share article on social media or email:
View article via:
Questions about a news article you’ve read?
Reach out to the author: contact and available social following information is listed in the top-right of all news releases.
Questions about your PRWeb account or interested in learning more about our news services?
Call PRWeb:1-866-640-6397
©Copyright 1997-2015, Vocus PRW Holdings, LLC. Vocus, PRWeb, and Publicity Wire are trademarks or registered trademarks of Vocus, Inc. or Vocus PRW Holdings, LLC.
Teaching kids how to create a safe space, one downward dog at a time – Los Angeles Times
Leah Rose Gallegos paced the library at Accelerated Charter Elementary School. In 15 minutes, the room would be full of fifth-graders in sneakers and school uniforms, arms raised overhead, dutifully following her instructions to breathe, stretch and look inward.
But first it was time for a consecration of sorts.
Gallegos stepped around the yoga mats spread on the floor, leaving drops of rosemary and lavender oil near the desks pushed against the wall and bookshelves stuffed with textbooks, board games and a row of mesh bug habitats housing newly hatched moths.
“It’s aromatherapy,” explained Gallegos, as the scent wafted around the room. “It’s one of the tricks that we do. When they walk in, they can feel like they’re somewhere else.”
The choice of rosemary was a deliberate one, she said; the resilient, sun-loving herb grows all over Los Angeles. In a later class, she will bring in a sprig of the live herb so kids will recognize it. She’ll teach them how to transfer its fragrance to their fingertips with just a gentle touch, so they don’t have to wait until her next visit to experience that sense of calm.
This is what her mindfulness class is meant to do, she said: “The goal is to give them as many tools as possible to help themselves.”
Gallegos — who founded People’s Yoga with Lauren Quan-Madrid in 2014 in East Los Angeles — was at Accelerated Charter for the first mindfulness class of the 2022-23 school year, a monthly offering for students in transitional kindergarten through sixth grade.
Gallegos and fellow instructors from People’s Yoga teach children yoga postures, deep breathing and meditation techniques. In a world that can feel scary and out of control — especially lately — the class aims to teach children how to create a safe place of their own.
“I don’t tell them, ‘It’s going to make you feel good.’ I say, ‘See how you feel,’” Gallegos said. “I really want them to reclaim the power of their own body, and of managing their own emotions.”
How To Save A Life
Pandemic stress, traumatic events and economic uncertainty have upended our world. This series aims to make the cascade of threats to your mental health a little easier to manage.
The stresses of the last two years have prompted a nationwide crisis in children’s mental health that hasn’t spared Accelerated Charter, a short walk from Exposition Park and USC. The school’s roughly 500 students in transitional kindergarten through sixth grade have collectively mourned family members lost to COVID-19 and watched parents who are essential workers risk exposure to the virus, while navigating the chaos, uncertainty and isolation of online school and pandemic life.
No monthly meetup alone can heal those hurts. But since the mindfulness class started, teachers and administrators at Accelerated Charter have noticed a subtle shift in the way students respond to stress and to the strength of their own emotions.
“At the beginning, it was, ‘Yoga? What is that? What’s going on?’” said Nestor Alas, the school’s dean of culture. “Because they have this perception, this mentality, about yoga being like, ‘Oh, that is for other types of people. That is not for us.’”
A year later, Alas said, “kids are using the strategies in yoga to deal with stuff outside the classroom — any problem, any issue.”
Earlier that week, Alas found a kindergarten student in tears over a lost lunchbox.
“What do you think we can do now?” Alas asked.
The boy looked at him with a tear-streaked face. “Breathe in,” he replied.
Together they took three deep breaths — in through the nose, out through the mouth, just like the child had learned. “I feel better,” he said when they were done, then returned to the hunt for his lunchbox.
When Accelerated Charter’s South-Central campus fully reopened for in-person learning for the summer 2021 program, Principal Karin Figueroa could see right away that her students were going to need extra support.
COVID-19, she said, “was like a new layer of trauma” on top of what kids were already dealing with.
Nationwide, pandemic-fueled disruptions to education have undermined years of progress in elementary math and reading skills. Those losses have been most acute in communities of color and those with high rates of poverty.
The vast majority of students at Accelerated Charter identify as Latino, and more than 90% of the school’s families qualified for free or reduced-priced meals prior to the pandemic, Figueroa said.
Figueroa hired a counselor and a social worker. She also wanted to go a step further.
“With younger children, they’re not able to verbalize [stress], but they will display it in different ways, whether it be a push or a yell. That’s the only way that they know how to express it,” she said. “So our job is to equip them with the words, techniques and strategies that they can tap into to cope with whatever it is that they’re feeling.”
She reached out to People’s Yoga. Before the pandemic, the studio offered family classes, occasional one-off workshops for elementary schools and ongoing programs at high schools in LAUSD and elsewhere. As the slow return to in-person activities began, Gallegos felt a strong urge to expand the studio’s offerings to young people.
“I felt this huge pull to do something that would support children, especially during this time when everything is crashing down on all of us,” she said.
California
A psychologist and expert in trauma urges professionals and parents to take a holistic approach to healing our children.
The students at Accelerated Charter were hardly alone in their struggles. One analysis of 80,000 young people worldwide found that symptoms of depression and anxiety doubled during the first year of the pandemic, with 25% of youth reporting signs of depression and 20% experiencing anxiety symptoms.
It’s a challenge that the U.S. — and California in particular — was ill-prepared to meet.
Even prior to the pandemic, mental health was the leading cause of poor life outcomes in young people, according to a public health advisory the U.S. Surgeon General issued in December.
Of the millions of children experiencing a treatable mental or emotional health condition, one study found, roughly half did not receive adequate care. California ranks in the bottom five states in
its ratio of school counselors to students. A 2020 statewide audit found that 97% of the state’s school districts failed to employ the recommended number of mental health professionals, and 25% had no such staff at all.
With a yawning gap between students’ emotional and mental health needs and available staff, many schools in California and beyond have embraced low-cost programs to bolster kids’ resilience.
Several studies have found that regular yoga instruction in the classroom helps improve students’ anxiety and emotional regulation. By 2015, roughly 1,000 schools across the country had implemented some sort of yoga program on campus.
But it hasn’t been universally embraced: Alabama law banned yoga in schools until 2021 and still prohibits meditation, chanting and the use of non-English terms in any classroom mindfulness instruction. (For example, the pose known in Hindi as adho mukha svanasana must have an English nickname like “downward dog,” and namaste is out.)
With children, educators say, specific poses matter less than the deep breathing and quiet attention that yoga requires. In a world that throws out all kinds of unexpected challenges, being able to create a sense of internal peace is invaluable.
“We wanted to be able to equip the students with techniques on self-regulating behavior, self-calming behavior, especially under stressful situations,” Figueroa said.
Back at Accelerated Charter, the room filled up with the students of Edgar Dominguez’s fifth-grade class.
“What’s the definition of yoga?” Gallegos asked the class.
“To be flexible,” a girl called out.
“With just our bodies?” Gallegos asked.
“No. Our arms, our hearts,” said Matthew Rosario, 10, from a mat in the front of the room.
Gallegos had them rise and stretch their arms and legs as though climbing an invisible ladder. They practiced breathing exercises: a deep breath in through the nose, an exhale through the mouth, as though fogging a mirror.
California
L.A. is known for its yoga culture. But yoga studios are few and far between in South L.A., so this co-op was created to expand the practice’s reach.
Can you say, ‘Ujjayi breath’?” she asked.
“Ujjayi breath,” the kids replied in unison.
At the end of the class, Gallegos asked how they’d felt when they came in that day and how they felt afterward. A hand shot up from the front. At the start of the class, he’d felt exhausted, Jabet Ibarra said.
And now?
“Grateful,” the 10-year-old said confidently.
When the pandemic hit, Ibarra explained after class, students had “nothing — just do class and do work,” he said.
But things are better now. He’s back in school. He can see his friends.
“We’re not in Zoom or home school, and we have yoga,” he said. “So I was grateful that we have something to calm us down.”
California
A poll of young Californians finds a generation feeling the strain of problems from the cost of housing to a lack of healthcare.
Get Group Therapy
Life is stressful. Our weekly mental wellness newsletter can help.
You may occasionally receive promotional content from the Los Angeles Times.
Follow Us
Corinne Purtill is a science and medicine reporter for the Los Angeles Times. Her writing on science and human behavior has appeared in the New Yorker, the New York Times, Time Magazine, the BBC, Quartz and elsewhere. Before joining The Times, she worked as the senior London correspondent for GlobalPost (now PRI) and as a reporter and assignment editor at the Cambodia Daily in Phnom Penh. She is a native of Southern California and a graduate of Stanford University.
California
Subscribe for unlimited access
Follow Us
Business Briefs Sept. 30 – Chadds Ford Live – Chadds Ford Live
Dignitaries from Kennett Square and Berger Rental Communities ceremonially break ground for Kennett Square Apartments to be built at 600 W. State Street (in the background) in the borough. From left are Doug Doerfler (Kennett Borough council), Matt Jonson, Dan Berger, Steve Berger, and Kennett Mayor Matt Fetick.
• Berger Bental Communities of Malvern broke ground Tuesday for a new 166-unit apartment in Kennett Square. The complex, known as Kennett Square Apartments, will have two, four-story buildings with studio, one-bedroom, and two-bedroom units. Rental prices will range from $1,300 to $2,500 per month. The complex is supposed to be ready by spring 2024.
• Wine tasting classes are returning to R Five Wines in Downingtown. Wine Tasting 101 is scheduled for 6:30 p.m. on Wednesday, Oct. 19. Wine educator Jessica Nee will explore the five Ss of wine tasting – See, Swirl, Smell, Sip, and Savor! Jessica will walk attendees through the basics of wine tasting so you can better appreciate what you are drinking and approach wines like a pro. The tasting includes four wines, mini cheese, and a charcuterie plate. The cost is $35 per person, limited to 25 people. Order tickets here.
• The next meeting of the Business and Professional Association of Western Delaware County is Wednesday, Oct. 19, at Brandywine Prime. Networking and cocktails begin at 6:15 p.m., dinner is at 7. Glen LeGault, of LeGault Financial Services, and Ann Angelucci, of Premier Payroll Services, are the scheduled speakers. The cost is $40. Go here to pay online.
About CFLive Staff
See Contributors Page https://chaddsfordlive.com/writers/
Comments
See Contributors Page https://chaddsfordlive.com/writers/
You must be logged in to post a comment.
Copyright © Chadds Ford Live – Building Community – One Story at a Time
WordPress webhosting and development by 2by2host.com
Artesia Pro Xjam Mobile Pad Controller Debuts – Mix
Update your browser to view this website correctly. Update my browser now
×
Home TechnologyNew Products
Artesia Pro has introduced Xjam, a plug-and-play mobile pad controller for live performance and music production.
By Mix Staff
San Diego, CA (September 29, 2022)—Artesia Pro has introduced Xjam, a plug-and-play mobile pad controller for live performance and music production.
The Xjam sports a slim, ultra-thin form factor with an anodized aluminum body, making it a portable option for programmers, DJs and music producers who need to bring their tools with them. Class-compliant and USB powered, Xjam works with Macs, PCs and iOS devices.
The Xjam features 16 pads that offer a responsive feel and polyphonic aftertouch; they can be used to access 48 user-programmable scene presets, which can be recalled via three banks. A half-dozen assignable knobs allow producers to control parameters such as volume, pan, filter, cutoff, and more; these result in use as up to 18 assignable 360° encoders accessible via three banks. As a USB-powered controller, users can take the unit anywhere and use it by simply plugging it into their device of choice.
The unit comes with a variety of bundled software, including Bitwig Studio 8-track and Wavelab LE for Mac and PC, as well as Cubasis on the iPhone and iPad. It also offersTRS 3.5mm MIDI out and comes with a USB-C-to-USB-A cable.
Artesia Pro’s Xjam is available at $139 USD MAP.
Mix Staff
artesia pro ⋅ Controller ⋅ xjam
© 2022 MIX is part of Future plc, an international media group and leading digital publisher. Visit our corporate site.
The hills are alive with art: Hilltown weekend features open studio tour, an art salon and other events – GazetteNET
Chesterfield painter Cynda Sperry is one of the participating artists in this weekend’s open studios tour in the Hilltowns. Photo by manadamarsh.com
Work by potter Worthington potter Mark Shapiro, one of the artists in the open studios tour this weekend in the Hilltowns. Photo by manadamarsh.com
“For the Love of PTown,” painting by Huntinton artist Susanna White. Image by Janine Norton
Fabric artist Kathy Ford of Worthington says there’s “a lot of new energy this year” in the arts community in the Hilltowns. Photo by manadamarsh.com
Worthington painter Elena Allee says her work is informed by her obsession “with the tension and dialogue between abstraction and figuration.” Image by manadamarsh.com
Work by painter Valerie Claff of Chesterfield, who will demonstrate her watercolor technique during this weekend’s open studios tour in the Hilltowns. Image by manadamarsh.com
The logo for the open studios tour in the Hilltowns Image by manadamarsh.com
Northampton, Easthampton and Amherst might grab many of the headlines when it comes to the area’s arts scene, given the number of artists in those towns, the presence of the Five Colleges, and performance venues such as the Academy of Music.
But as artists in the Hilltowns might say, “Don’t forget about us.”
This weekend, some of those artists are offering a specific reminder, with 18 art makers in six towns throwing open the doors of their studios to feature work from 23 artists in total. Also on tap will be an art salon in Cummington, a wine tasting in Southampton, and a celebration of the 10th anniversary of The Old Creamery Co-op in Cummington that will be marked with food and music.
The Hilltown Arts Alliance and the Hilltown Community Development Corp. have joined forces to sponsor the Sept. 30 through Oct. 2 events, both as a way to showcase the vitality of the arts and small businesses in their communities and to mark something “of a return to normalcy,” as one organizer puts it, after COVID-19 disrupted things in the past two years.
“There’s a lot of new energy this year,” said Kathy Ford, a fabric artist and the president of the Hilltown Arts Alliance. “We’ve got some wonderful artists taking part (in open studios) and then all the other events going on … and we’re looking at some increased opportunities for the arts (in the Hilltowns) coming down the road.”
As Dave Christopolis, director of the Hilltown CDC, notes, Cummington is on the cusp of receiving designation as a Massachusetts Cultural District, which should pave the way for grants that can be used to create more studio space and other facilities in town, most notably by refurbishing the former elementary school that closed several years ago.
“It can be a little hard to define this region,” said Christopolis. “We’re between the Berkshires, which is very well known, and the Northampton-Amherst area and the colleges. But we’ve got over 300 local businesses, we have a pretty vibrant arts community, and we’re looking to build on that and also give artists more tools for marketing their work.”
Christopolis said the Hilltown CDC is also helping restore some other venerable buildings in the region that artists might use; meantime, he noted, two new restaurants, The Goldenrod Country Inn and Liston’s Bar & Grill, have opened in older spaces in Worthington (Liston’s officially reopens Oct. 1 under new ownership).
The Hilltown Arts Alliance, a nonprofit group that supports artists in the region, began the open studios tour in June 2018, and Ford said the turnout that year and in 2019 was good, considering it was a new event.
Then the pandemic shut it down in 2020; last year it was shifted to early October and held with COVID protocols such as masks, “and the response was pretty strong,” she said. “I think people were just so happy to get out and do something.”
This year’s tour, which takes place Oct. 1 and 2 from 11 a.m. to 5 p.m. both days, will cover studios in six communities: Plainfield, North Chester, Worthington, Huntington, Chesterfield, and Cummington. Artists include painters, sculptors, fabric and jewelry makers, printmakers and ceramicists; 23 artists are included, with some sharing their work at other’s studios.
A number of live demonstrations and other events are scheduled in artists’ studios. Chesterfield painter Valerie Claff, for instance, will paint a watercolor from start to finish on Oct. 1, beginning at 1:30 p.m., and acclaimed potter Mark Shapiro of Worthington will make a teapot in one hour, beginning at 3:30 p.m. on Oct. 1.
“Meeting people and sharing some of your work with them is really a treat,” said Ward, also of Worthington; she’ll demonstrate some of her quilt-making techniques at her studio at 11:30 a.m. on Oct. 2.
To set the stage for the studio tour, The Art Salon, a regular program in the Valley in which a small group of artists and designers discuss their work in an informal setting, will take place at the Cummington Community House at 6:30 p.m. tonight (Friday, Sept. 30). Before that, an art walk in the town’s Cultural District is offered at 5:30 p.m., and a dance performance will be staged outside the Community House at 6 p.m.
Ward says open studio tours in the Hilltowns, to some degree, are building on the legacy of the Cummington School of the Arts, a summer program that began in the 1920s and extended into the latter 20th century, featuring various performances and residencies for a range of artists. Some notable names, such as painters Helen Frankenthaler and Willem de Kooning and photographer Diane Arbus, spent time there.
“There really is a rich tradition here, especially of artists from cities finding a new home in the country,” said Ward, who has previously worked as an architect in New York City and then Amherst.
She notes that potters in the Hilltowns, including Mark Shapiro, have also featured a tour of their studios for years.
Events in the Hilltowns this weekend include tastings at Sena Farm Brewery in Worthington, including the unveiling of a new beer, The Artist’s Palate, flavored with local raspberries; the Old Creamery Co-op celebration, on Oct. 1 from 5:00 to 7:30 p.m. at Pettingill Memorial Park in Cummington; and a wine tasting at Glendale Ridge Vineyard in Southampton on Oct. 2 from 4:00 to 6:00 p.m.
More information about all these events, including a map of participating artists’ studios and places to eat, can be found at hilltownartsalliance.org.
Steve Pfarrer can be reached at [email protected].
SOUTH DEERFIELD — Three years after they began looking for a site that could accommodate their rapidly growing polyurethane manufacturing business…
SHELBURNE FALLS — “What would happen if farmers adapted to climate change without relying so much on plastic and petroleum?” asks Abby Ferla. “One…
HADLEY — The University of Massachusetts has filled 585 staff positions at all levels since May 1 — and it’s still 700 short of being fully staffed…
KYIV, Ukraine — Russian President Vladimir Putin signed treaties Friday to illegally annex more occupied Ukrainian territory in a sharp escalation…
School of Dance hosts the first Dance Studio Day in November – Ohio University
Students and teachers of dance are invited to join the Ohio University School of Dance faculty and current students for Dance Studio Day on Saturday, Nov. 5.
The event features a full day of fun and educational dance activities designed to help participants progress in the discipline. Dance Studio Day is open to high school dancers of all levels, and runs from 9:30 a.m. – 4 p.m. at Ohio University.
During Dance Studio Day, students will have the opportunity to participate in master classes with OHIO faculty and students, and meet current dance majors and featured alumni to learn more about the exciting opportunities available in the School of Dance and the College of Fine Arts.
“This event will be a unique opportunity for dancers and teachers to immerse themselves in the exciting and warm embrace of the Ohio University environment and the brilliance of its School of Dance community. Our students and faculty look forward to sharing their passion for movement, self-expression, dedication to high academic rigor, and shared learning. The School of Dance offers a highly supportive environment, and we invite all who want to discover this extraordinary opportunity in OHIO,” says Zelma Badu-Younge, professor of dance and director of the School of Dance.
Participating students will receive one-on-one feedback from faculty and advanced students to help refine their skills as artists. And as an added benefit, current high school seniors may choose to use this experience as an audition.
Students should register for Dance Studio Day before the day of event. There is no fee to attend.
© 2022 Ohio University. All rights reserved.
Microsoft reportedly prepares Surface Studio 3 with two-generation-old CPU and GPU – Neowin
Microsoft plans to unveil next-generation Surface devices during its annual event announced for October 12, 2022. Besides new Surface Pro and Laptop models, Microsoft will show the much-anticipated third-gen Surface Studio all-in-one (do not confuse it with the Surface Laptop Studio). As usual, last-minute leaks reveal slightly disappointing details about the largest Surface computer with a sophisticated hinge.
Windows Central reports that the upcoming Surface Studio 3 will remain a high-end premium device with a price tag climbing past a $3,000 threshold. Rumors claim Microsoft has decided to offer a single SKU with an 11th Gen Intel processor and “last-gen” Nvidia RTX graphics card. Two-generation-old hardware is quite a disappointment for such an expensive computer, especially considering performance and architecture improvements in Intel’s 12th and 13th Gen CPUs. Other specs reportedly include only 32GB of RAM and a 1TB solid-state drive.
Of course, the new hardware will be much more capable compared to what the Surface Studio 2 offers (7th Gen Intel processor and the Nvidia GTX 1070 graphics card), but it is still sad to see Microsoft not opting for more recent and powerful components. The company still wants to play it safe after choosing the newest processors that caused many problems in the Surface Pro 4 and the original Surface Book.
Design-wise, the Surface Studio 3 will most likely remain identical to its predecessor. A leak from the FCC recently revealed the Surface Studio 3 with the same hinge, base, and large bezels around the display. Even the keyboard and mouse that Microsoft bundles with the Surface Studio 3 will get little to no changes. The “updated” Surface Pen will feature the classic rounded design, meaning no wireless charging like in the Surface Slim Pen 2.
As for the other features, like a high refresh rate display, upgraded speakers, or better thermals, we need to wait for October 12 to hear from Microsoft itself. Those not interested in buying a $3,000 all-in-one with a slightly outdated hardware might be more interested in the more affordable Surface Pro 9 or Surface Laptop 5.
Would you consider a $3000+ all-in-one with two-generation-old hardware? Share your thoughts in the comments.
Source: Windows Central
with 0 comments
with 16 comments
with 17 comments
with 18 comments
Please enter your reason for reporting this comment.
windows 11 tick
windows 10
windows 11 insider preview
windows 11 promo
teams windows 11
windows 11 2022 update
windows 11 22h2
tech tip tuesday
twirl
microsoft weekly
© Since 2000 Neowin LLC. All trademarks mentioned are the property of their respective owners.
Beat Blitz, a new rhythm-based platformer from a one-man indie studio, launches late next month – Pocket Gamer
Courtesy of indie studio Bassware, a brand new rhythm game that’s reminiscent of some old classics, entitled Beat Blitz, will be launching for Android and iOS on October 24th. This charming little indie title will see you take on gauntlets full of obstacles and challenging terrain, dodging danger as you also aim to keep on the beat to collect orbs in time with the music.
Right away, Beat Blitz reminded me of a really old Xbox 360 arcade original indie game called, very simply, The Impossible Game. The vibes are quite similar in the sense that you control a small geometric shape making its way across an equally small stage full of neon colours and tough obstacles.
Where Beat Blitz differentiates itself from the regular obstacle course runner that is The Impossible Game is its rhythm-based mechanics. This is a one-finger game that is quite simple at its core, as all you’ll be doing is tapping your screen to make your shape jump. To spice this up, there are orbs placed around the stage in between bouts of obstacles as you continuously are forced to the right of the screen that you’ll have to time your jumps to collect.
On top of that, you’ll also have to do that in time with the music, otherwise, your score will be lower, as will your multiplier to up that score even more. This makes for an interesting combo of a somewhat endless-runner adjacent style of play alongside some cool rhythm mechanics mixed in with reflex-based obstacle avoidance. All-in-all, it makes for quite a unique little hodgepodge of different gameplay.
To top it off, Beat Blitz also has quite a sick soundtrack with pulsating beats and some catchy EDM-based earworms that will keep you fully engaged with the gameplay. Add this in with the neon-soaked visual style of the stages you’ll play through, and you’ve got a pretty nifty simple but hard-to-master indie rhythm game.
Currently, Beat Blitz doesn’t have its store pages up for the App Store or Google Play, but you can tune into Bassware Games’ Twitter account for more updates, screenshots, and trailers!
A Guide on the Best Schools/Colleges for Electronic Music Production – We Rave You
Making music is a passion for many people. For some, it’s a lifelong dream to create the next big hit. If you’re one of those people, then you’ll need to go to school to learn the proper techniques. In this blog post, we will discuss the best schools and colleges for electronic music production. We’ll also give you a few tips on what to look for when choosing a school!
What is electronic music production and what do you learn in school?
Electronic music is defined by the use of electronic musical instruments and technology in its production. This type of music generally includes a variety of genres, including EDM, house, techno, dubstep, and more.
While some may consider anything made with a computer to be electronic music, true EM production involves the use of specific software and hardware to create original sounds. In school, you will learn about the various elements of EM production, such as sound synthesis, mixing, and sequencing. You will also get the opportunity to try producing your own tracks.
The best schools/colleges for electronic music production
If you’re interested in pursuing a career in electronic music production, think about what type of music you’d like to produce, as advised by writers pro. There are many different sub-genres of electronic music, and each has its own unique sound. Do your research and make sure you’re choosing a school that specializes in the type of music you want to pursue, not something else.
Then think about the kind of equipment you’d like to use. Many schools have state-of-the-art facilities with the latest industry-standard equipment. However, some students prefer to use more traditional hardware and software. Make sure the school you choose has the right mix of equipment for your specific needs.
Last but not least, what is your budget? EM production can be expensive, so it’s important to find a school that fits your financial needs.
Now let’s dive into the best international school programs.
1) The University of Edinburgh in Scotland offers a four-year degree program. The course covers a wide range of genres, from dance music to ambient soundscapes. Students have access to top-notch facilities and equipment, including an on-campus recording studio.
2) The University of Salford in England offers a three-year degree program in electronic music production. The course focuses on dance and club music genres, and students have access to world-class facilities and equipment.
3) Berklee College of Music in the United States offers a variety of degree programs in EM production, including a Bachelor’s degree and a Master’s degree. The program covers a wide range of genres, and students have access to state-of-the-art facilities and equipment. Berklee also offers online classes for students who want to study at their own pace.
4) The Royal Conservatory of Music in Canada offers a two-year Artist Diploma in Electronic Production and Composition. The program covers a wide range of genres, from experimental soundscapes to dance music.
5) SAE Institute in Australia offers a three-year diploma program in audio engineering with a focus on electronic music production. The program covers a wide range of genres.
You might need outstanding grades or an out of the ordinary admissions essay to get into these schools. If that’s the case, don’t hesitate to get college essay help if you can afford it. It can make a huge difference.
How to choose the proper school for your needs
Start by considering the level of training you need. If you’re just starting out, you may want to consider a program that offers an Associate’s Degree or Certificate. These programs will give you the basic skills you need to get started in the industry. However, if you’re looking to pursue a career in electronic music production, you’ll need to get a Bachelor’s Degree from an accredited institution.
Next, take a look at the curriculum offered by each school and check out their stock music libraries. Make sure it includes courses on music theory, composition, sound design, and audio engineering. You should also look for programs that offer internships or externships so that you can gain real-world experience.
Also, don’t forget to consider the cost of each program. Tuition and fees can vary widely, compare costs before making your final decision.
Tips for paying for school and getting scholarships
A day in the life of an electronic music producer
Producing electronic music is a lot more than just making a beat and mixing some sounds together. It requires a deep understanding of music theory and composition, as well as an ear for detail. A typical day in the life of an electronic music producer might involve spending hours creating new sounds in their studio, or working on a remix of a track by another artist. They might also spend time listening to new releases and looking for inspiration for their next project.
Conclusion
If you’re interested in a career in electronic music production, there are a number of great schools and colleges to choose from. Pick one that suits your needs and go for it! Good luck!
Photo by Jordan Whitfield on Unsplash
Acting as the CEO and founder of the site, the highly successful entrepreneur soon saw his team grow meteorically under his stewardship, amassing more than 1 million followers across the brand’s platforms. In addition, working with esteemed global entities such as Tomorrowland, AMF, EXIT Festival, Ushuaïa, Hï Ibiza, Parookaville and many others festivals and clubs aswell as some of the world’s most reputable record labels, artists and agencies.
[email protected]
Putin proclaims annexation of four Ukrainian regions – The Washington Post
Putin proclaims annexation of four Ukrainian regions The Washington Post
source
Marywood welcomes new music production club – The Wood Word – The Wood Word
Emma Bernatowicz, ContributorSeptember 29, 2022
Photo credit/ Kim Petro
The club’s first meeting!
Joining Marywood’s lineup of 50 clubs this semester is the Music Production Club. Junior Eric Spivak, a film, tv and digital media major with a music minor, is the brains behind it all.
While most clubs are department-based, Spivak wanted to “bridge the gap” between the music programs and the multimedia communication program. Spivak recognized both programs could benefit from working with one another and especially provide equipment access to students in the music program.
Spivak is a self-proclaimed beginner in music production, but his interest was piqued while working with school friends on some music projects.
“I met two friends here, Rubane Singh and Jason Ardan, and we worked on music together, which sparked [my] interest in starting the club,” he explained.
That communal feeling is what Spivak wants to introduce everyone to in the hopes that more people might join the club.
Even though the club is new to Marywood, Spivak hopes it will benefit both music and multimedia communication students. He hopes that the club opens up opportunities for students through equipment access, practicum opportunities, and working with like-minded people. Practicum is a required course where multimedia communication students gain practical, hands-on experience outside the classroom.
“I really hope in the Spring semester for this to count toward practicum,” said Spivak.
He also hopes the club generates further interest in music production to eventually move toward a music production major in the future.
The club will be a place for members to work and grow individually, but also a collaborative space for like-minded people to work with one another.
“The club is open to everyone. Our advisors and I would be more than happy to teach the basics of music production,” Spivak noted.
Gina Sacco, a freshman music therapy major and club member, is excited about the group.
“I want to learn how to use the equipment better, utilize LogicPro, and to learn how to make tracks, which I could use in my future career,” said Sacco.
The club is on its way towards a successful semester and a bright long-term future with the hopes to continue expanding.
“We want to try to expand the club to utilize different people’s talents and work collaboratively,” states Sacco.
Contact the writer: Emma Bernatowicz
([email protected])
A Top Stories
Arts & Entertainment
A Top Stories
The Crypt Collection: “A Nightmare on Elm Street”: A retrospective into the classic horror film.
A Top Stories
OPINION: “The Little Mermaid” looks flawed, but not because of the casting
A Top Stories
“Dancing at Lughnasa” gives an intimate perspective on change
A Top Stories
Students Express Concerns about Active Shooter Drill
A Top Stories
Marywood Field Hockey Brings Awareness to Eating Disorders
A Top Stories
Marywood Welcomes New International Students
A Top Stories
Marywood Men’s Soccer falls short to Penn State Berks
A Top Stories
BookLash: Is “The Handmaid’s Tale” a scary prediction of the future?
A Top Stories
Marywood men’s lacrosse ends playoff run against Gwynedd Mercy
A Top Stories
OPINION: Unions are the backbone of our country
The Wood Word
The news site of Marywood University
