Blog

Marion Brewington, master gardener – CapeGazette.com

Marion Brewington (French, Sharp, Truitt, Brewington), our devoted matriarch, went to her heavenly reward Thursday, Sept. 22, 2022, peacefully at home at the age of 84.
Marion was born on Sept. 9, 1938, in Milford, daughter of John H. and Ruby (Best) French. She graduated from Milford High School in June 1956. 
In addition to raising her three children, she worked at Delaware State Highway Department, JC Penney Co. in Milford, and the State of Delaware Juvenile Corrections-Stevenson House in Milford, retiring from Stevenson House in June 1991. She truly enjoyed her work there, the children, and especially the staff. They worked together as a family unit and remained close in friendship. 
Never one to sit still, in retirement Marion enjoyed happy years working for both Warner’s Produce and Hill’s Produce. Wherever she went, she left an impact and made many lasting friendships. She loved being a master gardener in both Kent and Sussex Counties, to whom she dedicated more than 20 years of her time and service, and she loved every minute of it. God was an integral part of her life. At an early age, she joined Sardis United Methodist Church, but spent her last years deeply devoted to Long Neck Methodist Church in Millsboro.  
She enjoyed her family greatly and was thrilled for everyone to gather for a meal. Also, gardening was very special to her, especially her vegetables and flowers. Being able to can and freeze her products made her happy, as well as being able to share the bounty. She will be remembered for her work ethic, love of God and family and her dedication to doing things the right way!
She was preceded in death by her parents, John and Ruby French; her brother, Jack French; her foster brother, Joe Penuel; her husbands, James Truitt and George Brewington; and her stepdaughter, Valerie Rogers. 
She is survived by her three children: Deborah Davis, Shirley (Jay) Walls and Richard Sharp; three stepchildren, J.B. Rogers, Eddie (Kim) Brewington and Cindy Brewington-Dare; 12 grandchildren: Kyle Davis, Daniel (Logan Pavlik) Walls, Jamie (John) Eller, Lauren (Stacey) Webb, Jennifer (Blake) Buckner, Nicole Sharp, Kelly (T.C.) Montague, Christine (David) Broadwater, Heather Hudson, George Brewington, Emily (Chris) Kotzian, and Olivia Dare; 16 great-grandchildren: Rylei and Stella Webb, Gavin and Logan Walls, Bella, Declan and Luka Buckner, James Pettitt, Jonah, Samuel, Benjamin, and Owen Montague, Dylan and Alyssa Layfield, William Brewington, and Hunter Kotzian; and one great-great-granddaughter, Skyla Hall. She is also survived by a devoted sister-in-law, Phyllis French; nephew, David French; niece, Rita Wells, and their families; many other family members, extended family, and close friends. 
Funeral services will be held at noon, Friday, Sept. 30, at Berry-Short Funeral Home, 119 N.W. Front St., Milford. A time of visitation for family and friends will begin at 11 a.m. Interment will follow at Milford Community Cemetery. 
Flowers are accepted, or a donation in memory of Marion can be made to Kent County Master Gardeners Scholarship Fund, P.O. Box 136 Woodside, DE 19980.
Online condolences may be sent at shortfuneralservicesandcremation.com.
 
The price of liberty is eternal vigilance.

source

Insider: Audio & Video Recording Capture Couple Selling Meth To Confidential Informant: Criminal Complaint – DrydenWire

WASHBURN COUNTY — Criminal charges have been filed against Gregory Mortensen and Brittany Dohm following an investigation by the Washburn County Sheriff’s Office assisted by the WI D.OJ. Division of Criminal Investigation, and the Sawyer County Sheriff’s Office.
This content is only for paid subscribers to DrydenWire Insider.
Please Login or Subscribe.
Note: Once you are logged in, you will see the full content of this article.
Last Update: Sep 27, 2022 12:55 pm CDT
Submit A Story or Press Release: [email protected]
Advertising Questions: [email protected]
General Questions: [email protected]
We noticed you have an Ad Blocker that is preventing you from seeing our ads.
All of DrydenWire’s content is supported by advertising.
Please consider whitelisting us to ensure we can continue to provide great free content.

source

Master Knife Skills With 63% Off This Japanese Kitchen Knife Set – The Inventory

Seido Japanese Master Chef Knife Set | $90 | 63% Off | StackSocial
Upgrade from prepping all your meals with steak knives (yes, you) with this shiny new Japanese knife set, now 63% off at StackSocial. Comprised of true high-carbon stainless steel, this set is super strong and built to last—so this set will last for years. Japanese knives have a more acute angle than Western-style knives, allowing for precision and sharper cutting. This set includes a standard 8" chef’s knife, a cleaver, two Santoku knives, and a pairing knife for peeling and attention to detail. Let each ergonomic wood handle support you in the kitchen as you embark on your most ambitious meals—or just your every day ones. 
G/O Media may get a commission

source

Father pleads guilty to attempted child endangering after 5-year-old shoots self in Middletown, court records say – FOX19

BUTLER COUNTY, Ohio (WXIX) – A father pleaded guilty to an attempted child endangerment charge following an April shooting when his 5-year-old son accidentally shot himself, according to Butler County court records.
Middletown police say Fernando Enamorado, 31, was arrested after police and fire crews responded to a home on 10th Avenue around 7:15 p.m. on April 27 for a report of a gunshot wound.
When officers arrived, they found a 5-year-old had been shot in the leg, according to police.
Investigators say the child was playing with a gun he found in his father’s bedroom. They think the shooting was an accident.
The child was taken to Atrium Medical Center with non-life-threatening injuries.
Enamorado is the one who called 911. He is heard on the audio recording saying the gun was put in his dresser drawer.
The 31-year-old father will return to court on Oct. 31 for sentencing.
See a spelling or grammar error in our story? Please include the title when you click here to report it.
Copyright 2022 WXIX. All rights reserved.

source

Netflix’s new video game studio is a potentially bold—and risky—swing – Fortune

The phrase “Netflix Originals” has always been a tiny bit of a misnomer.
Contrary to the implication of its “originals” moniker, Netflix doesn’t actually produce movies and television series. Rather, it commissions projects made by outside production companies—Sony Pictures Television and Shondaland, to name two—and distributes content on its eponymous platform.
It’s an approach that has worked wonders for Netflix, allowing it to partner with an array of high-profile talent and avoid some of the prohibitive costs associated with serving as producer and distributor.
So it was a bit surprising to hear that Netflix will take on those dual roles with its venture into the mobile gaming industry.
Netflix officials announced Monday that the company is creating an internal gaming studio “from scratch” in Helsinki, Finland, with the goal of producing titles for its subscription streaming platform. The decision comes 14 months after Netflix declared its intentions to join the mobile gaming wars, a move that has puzzled some investors and analysts.
Details about the proposed studio were scant, though Netflix executives confirmed that Zynga and Electronic Arts veteran Marko Lastikka will serve as studio director. Company officials said they chose Helsinki because it is “home to some of the best game talent in the world” and already has the headquarters of Next Games, a developer acquired by Netflix earlier this year for $72 million. 
In a statement Monday, Netflix vice president of game studios Amir Rahimi suggested the internal unit will operate independently of three small developers purchased by Netflix in the past 12 months. Netflix also is expected to continue hosting games by outside developers, who have created nearly all of the roughly 30 games currently on the company’s platform.
“It’s still early days, and we have much more work to do to deliver a great games experience on Netflix,” Rahimi said. “Creating a game can take years, so I’m proud to see how we’re steadily building the foundation of our games studios in our first year, and look forward to sharing what we produce in the coming years.”
Rahimi’s comments suggest that Netflix sees the gaming industry and in-house game development as a long-term play, giving the new studio time to find its footing. Still, the decision to build out an internal gaming unit carries some risk.
To date, no company has successfully created bestselling mobile games and an accompanying platform, let alone one that depends on subscription revenue. 
The most-played mobile games of all time are available via apps downloaded one-by-one on the Apple iOS and Android operating systems. Roblox is a hugely popular platform, but it merely offers tools for developers to make games. Apple and Google appear to host modestly successful mobile gaming subscription platforms (neither outfit releases subscriber numbers), but they don’t develop titles in-house. Nintendo is probably the closest potential analogue, yet its platform largely exists on a handheld console.
Netflix’s commitment to an internal gaming studio also remains unclear.
While such departments aren’t particularly expensive in the grand scheme of Netflix—the company just blew $200 million on a barely watchable Ryan Gosling-Chris Evans action blockbuster, after all—the company’s recent financials aren’t sparkling. A slowdown in advertiser growth and profits, combined with $14.2 billion in long-term debt liabilities as of June, has forced Netflix into penny-pinching mode this year.
And as Rahimi noted, Netflix’s gaming studio likely will need multiple years to produce anything of serious consequence. By that time, it’s possible that tastes will have shifted or new technologies, such as virtual reality, will have supplanted mobile gaming.
Perhaps Netflix sees a grander vision in its gaming studio, one that didn’t make it into the company’s three-paragraph press release. Monday’s announcement notably never mentions mobile, leaving open the possibility that a new studio could focus more on cloud-based gaming.
Netflix certainly has earned the benefit of the doubt when it comes to busting the entertainment industry status quo. For Netflix leaders, patience and execution—and of course, creating some hits—will be the name of the game.
Want to send thoughts or suggestions for Data Sheet? Drop me a line here.
Jacob Carpenter
Caught in the act. Meta disclosed Tuesday that it has removed about 1,600 Facebook accounts tied to a Russian disinformation network targeting Europe and discovered a significantly smaller propaganda campaign based out of China spreading divisive content in the U.S., the Associated Press reported. The Russian operation marked the largest pro-Kremlin propaganda effort on Facebook since the federation invaded Ukraine, Meta officials said. The Chinese campaign, which spanned multiple social media platforms, appeared to be very small and poorly executed, company leaders said.
An unceremonious exit. Celsius Network CEO Alex Mashinsky resigned Tuesday from his position at the bankrupt cryptocurrency lender, ending a five-year tenure marred by the recent fall of the company, the Wall Street Journal reported. Mashinsky said his presence as chief executive had become a distraction for Celsius, which filed for bankruptcy in July following a collapse of digital currency values. Celsius issued high-yield loans backed by insufficient collateral in the event of a downturn in crypto prices.
Picking up the scraps. Cryptocurrency exchange FTX scooped up the assets of bankrupt crypto brokerage Voyager Digital at auction with a bid of roughly $1.4 billion, Bloomberg reported Monday. The deal gives FTX access to Voyager’s customer base, which totaled about 3.5 million users and 1.2 million funded accounts in the months before its collapse. Voyager declared bankruptcy following a sharp drop in cryptocurrency values earlier this year and the demise of crypto hedge fund Three Arrows Capital, which received large loans from the broker.
Nobody’s crying for them. Tech tycoons listed on the Forbes’ list of the wealthiest 400 Americans have seen their net worth drop by $315 billion in the past year, the news outlet reported Tuesday. The biggest declines in wealth were felt by Amazon founder Jeff Bezos (a $50 billion drop), Alphabet co-founders Larry Page and Sergey Brin (about $30 billion each), and Microsoft co-founder Bill Gates ($28 billion). Tech leaders accounted for roughly two-thirds of the $500 billion in lost wealth among members of the list.
In crisis mode. South Korea’s standing as a hub of semiconductor production is under threat, and it’s got government officials and corporate leaders on edge. The country’s science minister told the Financial Times that there’s “a sense of crisis” spreading throughout the industry, as American legislators lavish semiconductor manufacturers with subsidies and the Chinese government devotes large sums of money to making memory chips. South Korean political leaders have promised to boost federal support for Samsung, SK Hynix, and other domestic chipmakers, but early proposals remain mired in the appropriations process.
From the article:
Lee Jong-ho, minister of science and information communications technology, and a renowned semiconductor expert, told the Financial Times that legislation passed last month had “laid the legal groundwork to support the semiconductor industry against severe competition from countries like the US, China, Japan [and in] Europe and Taiwan”.
“It reflects a sense of crisis about our competitiveness on the global stage and the act is designed to strengthen our competitiveness in supply chain and security,” said Lee.
After a 14-year-old Instagram user’s suicide, Meta apologizes for (some of) the self-harm and suicide content she saw, by Sophie Mellor
Meet the Italian entrepreneur who raised $340 million from Ryan Reynolds, Gabrielle Union and others: ‘Profitable from day one’, by Chloe Taylor
Will Robinhood’s no-gas-fee wallet pay off?, by Jeff John Roberts
Bitcoin rapid payment service Strike raises $80M, takes aim at Visa, by Jeff John Roberts
A Bill Gates-backed startup is retrofitting diesel engines to run on cleaner fuel and challenging the idea that ‘all carbon is evil’, by Ian Mount
Thoma Bravo takes a break from new crypto investments, laying out ethical concerns, by Jessica Mathews
Red in the face. A lesson for Texas legislators: Don’t mess with Redditors. Techdirt reported Monday that a cheeky band of moderators in the /PoliticalHumor subreddit, which boasts about 1.5 billion members, is calling out the Lone Star State’s controversial new censorship law with a creative (albeit crass) digital campaign. Critics of the statute, which says large digital platforms cannot censor online content based on the poster’s viewpoint, have argued that the provision forces tech companies to host all kinds of repulsive speech. So henceforth, the /PoliticalHumor mods are going to “flagrantly break this law” by removing any post on the subreddit that does not contain the phrase “Greg Abbott is a little piss baby.” (Abbott, the governor of Texas, signed the censorship bill into law.) It’s little more than a stunt designed to bring attention to the law—an injunction seeking reinstatement of content is the only legal remedy to censorship in Texas—but certainly a clever one at that. The Supreme Court might take up the constitutionality of the statute sometime next year.
This is the web version of Data Sheet, a daily newsletter on the business of tech. Sign up to get it delivered free to your inbox.
© 2022 Fortune Media IP Limited. All Rights Reserved. Use of this site constitutes acceptance of our Terms of Use and Privacy Policy | CA Notice at Collection and Privacy Notice | Do Not Sell My Personal Information | Ad Choices 
FORTUNE is a trademark of Fortune Media IP Limited, registered in the U.S. and other countries. FORTUNE may receive compensation for some links to products and services on this website. Offers may be subject to change without notice.
S&P Index data is the property of Chicago Mercantile Exchange Inc. and its licensors. All rights reserved. Terms & Conditions. Powered and implemented by Interactive Data Managed Solutions.

source

'Little Folk Singer' Ani DiFranco Set to Play Madison Theater in October – Cincinnati CityBeat

By on Tue, Sep 27, 2022 at 12:58 pm
Wanna relive the late-’90s DIY scene? Legendary singer-songwriter and feminist activist Ani DiFranco is rolling through Covington on Oct. 15 for a stop at Madison Theater.
DiFranco originally was set to pass through Greater Cincinnati in fall of 2021 in support of her latest album Revolutionary Love, released that year. The tour was postponed due to safety concerns surrounding COVID-19. 
This time around, DiFranco is touring in celebration of the 25th anniversary of her seminal live album, Living In Clip. The 1997 album not only cemented her place among the DIY scene but also put her in front of an even wider audience. DiFranco’s record label, Righteous Babe Records, is marking the anniversary by reissuing Living In Clip and making it available on vinyl for the very first time. According to press materials, the record will sport a new album cover and many never-before-seen images from the time.
The 26-date run will take DiFranco across the country and give her yet another chance to connect with her devoted fans. Abraham Alexander will open for DiFranco during her visit to Covington. Tickets start at $38. The show starts at 7:30 p.m. Madison Theater is located at 730 Madison Ave, Covington. Info: madisontheater.com.

Below, watch DiFranco discuss her career and Revolutionary Love on CBS This Morning.


Stay connected with CityBeat. Subscribe to our newsletters, and follow us on Facebook, Instagram, Twitter, Google News, Apple News and Reddit.
Send CityBeat a news or story tip or submit a calendar event.
New Ad: Cincinnati Republican Steve Chabot Is Watching You Fuck
By Allison Babka
Tour a World War II-era Naval Ship at Sawyer Point
By Sean M. Peters
Subscribe now to get the latest news delivered right to your inbox.
Tickets are Still Available to Deadmau5 Performance in Cincinnati This Weekend
By Deirdre Kaye
DJ Duo SLANDER to Perform at MegaCorp Pavilion on Heels of Full-Length Debut Release
By Jeff Niesel
Queen City Music Spotlight: Catch These 10 Cincinnati Concerts Featuring Local Acts in September
By Brent Stroud
Cincinnati Native Clockwork DJ Keeps Ticking
By Brian Baker
Cincinnati Band A.M. Nice Releases New Album ‘Half Past Tense’
By Brian Baker
Listen: Massive Nights Releases New Album, “Trash Pop”
By Sean M. Peters
Cincinnati Native Clockwork DJ Keeps Ticking
By Brian Baker
Sound Advice: Drummer Billy Cobham to Revisit Legendary ‘Crosswinds’ Album at Upcoming Cincinnati Show
By Brent Stroud
View more issues
Read our sister publications
811 Race Street, 4th Floor
Cincinnati, OH 45202

source

Identification and modelling of dynamic parameters for round link chains subject to axial loads | Scientific Reports – Nature.com

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 16155 (2022)
Metrics details
A round link chain subject to axial dynamic loads composes a nonlinear viscoelastic system. Unlike the classical pounding problems, the round link chain will not only suffer linear elastic deformation, but also nonlinear plastic or impacting deformation. Based on theoretical formulation and experiments, a new approach is presented in this paper to model and identify the nonlinear dynamic parameters, namely the stiffness and damping for the round link chain. With linear deformation, nonlinear deformation and energy dissipation considered, a modified nonlinear viscoelastic model is developed to describe the vibrational behavior of the chain with numbers of round links. The linear elastic model and impacting model are combined to derive the equivalent nonlinear stiffness, while experiments and the least square fitting method are employed to identify the nonlinear damping according to the modified nonlinear viscoelastic model. The influences of the key parameters such as the length of the chain, elastic module and loading frequency on the dynamic stiffness and damping are investigated. Another test is performed to validate the identification model and good agreements are observed.
As key components of shipping/lifting hoists or bulk material handling machines, round link chains are wildly used in marine, mechanical, mining and civil engineering. Investigations on the dynamic characteristics are of great significance for good performance of the corresponding equipment and machines1,2,3.
Numerous researchers have been devoting to the static and dynamic analysis for kinds of round link chains. Ming et al.4 derived an equation to relate the contact area of the round link chains to the static contacting stress. Li et al.5 calculated the maximum stress and pressure distribution of the contact area of the ring chain by Hertz theory, and obtained the maximum stress of the meshing contact area of the sprocket chain. Bian et al.6 established the mathematical equation of circular chain structure, deduced two static analysis models of chain-ring contact, simulated and analyzed the collision process between circular chains, and revealed the fatigue fracture mechanism and fatigue crack propagation law of circular chain. Li et al.7 established a virtual prototype model for dynamics simulation of chain drive system, simulated and analyzed the start-up of ring chain load after shutdown, and obtained the variation law of kinematics and dynamic behavior response of meshing contact. Diao et al.8 conducted photo-elasticity experiments and finite element (FE) analysis on the contact stress for the round link chains. Wang et al.9 used time-varying dynamic analysis method to obtain the dynamic tension distribution of the chain of heavy scraper conveyor. The finite element analysis was carried out on the three-dimensional contact between the adjacent chains of the straight segment and the bending segment to obtain the three-dimensional stress distribution of the chain.
As reviewed, since the round link chain usually suffer heavy axial load to convey bulk material or to transfer motions, reasonably more attentions are paid to the dynamic characteristics in the axial direction. When the round chain is subjected to harmonic or impacting excitations, impacting, friction and even plastic deformation10 can be observed. The round link chain composes a typical viscoelastic system. The damping effects and the nonlinear stiffness should be considered in the dynamic analysis. The Kelvin–Voight model, which was firstly developed for the pounding problems11, is widely used to take the energy dissipation into account. However, quite similar to the pounding problems, the contact, friction and the plastic deformation are actually all nonlinear. Thus, the linear model cannot totally consider the nonlinear factors for the damping and stiffness. To address the issues for the pounding problems, kinds of non-linear models12, such as the Hertzdamp non-linear model13 and nonlinear Hunt–Crossley model14 have been proposed. All the nonlinear models are quit efficient and accurate for lots of cases and they are also well employed to model other viscoelastic systems15,16,17.
However, the stiffness and damping coefficients can hardly be determined for complex practical systems. Thereby, considerable work has been done to develop identification methods and experimental techniques to identify or measure the dynamic parameters18. Based on the servo motor current and corresponding position deflection, Yang et al.19 developed a new identification methodology for the accurate joint stiffness of heavy duty robots. Fan et al.20 employed the expected trajectory and external load to identify the stiffness defect of a parallel manipulator. Jin et al.21 extended the Hertzdamp model to derive the equivalent stiffness and damping for auto eliminating clearance auxiliary bearing devices. Liu et al.22 established a variable motion mapping method to enhance stiffness identification of the remote object. Based on the output properties, Zhao et al.23 developed an algorithm to reconstruct simultaneously an anti-damping coefficient for some anti-stable systems, yet the algorithm is not suitable for the Kelvin–Voigt damping and some other spatially varying damping.
With the devolvement of experimental techniques, more and more test-based composite methods are proposed to obtain the dynamic stiffness and damping. Wang et al.24 designed a measurement system and derived a tangential contact stiffness model to identify the friction damping and the key parameters of tangential contact stiffness in the transition process. Xu et al.25,26,27 developed a laser-based deformation modeling methods and successfully identified complex deformations for composite structures. Lee et al.28 utilized curved-edge diffraction to improve the dimensional measurement technique, and the dynamic parameters for a ball bearing spindle system was obtained. Domenico Lisitano et al.29 formulated a so called layer method for damping matrix identification using the experimental receptance- -matrix data together with physical connectivity constraints. The method could overcome the ill-conditions and is stable for various frequency ranges. Budak et al.30 put forward a new identification framework for the process parameters in turning and milling. The process damping was obtained from chatter tests and the indentation force coefficient is identified with an energy method. Ben Romdhane et al.31 performed experiments to determine the loss factors of a non-obstructive particle system with large number of freedoms. When the damping properties were obtained, they employed an equivalent viscous damping to predict the dynamic characteristics of a beam with the non-obstructive particle system.
The above review indicates that the nonlinear viscoelastic models can be successfully used to study the dynamic characteristics of a wide range of viscoelastic systems, not just limited to the pounding problems. Even though the stiffness and damping coefficients are hardly determined theoretically for complex systems, including the round link chain, the model still can provide physical insights into the viscoelastic problems and can be readily employed to develop experiment-based composite identification methods. Moreover, as presented in the latest literature, the stiffness, linear or nonlinear, can be formulated in a theoretical way, though the expressions of the nonlinear ones are quite complex. However, damping properties for complicated systems are usually obtained using tests, because the energy dissipating mechanism for the systems is comprehensive and sophisticated. Hence, this paper is intended to combine the theoretical modeling and experiments for dynamic parameter identification of a round link chain with numbers of round links. An energy method is utilized to deduce the nonlinear stiffness, including the linear elastic one and the one for the indentations. Based on a modified nonlinear viscoelastic model and testing data, the nonlinear damping for the round link chain is given. The identified results is validated with a new experimental case and the effects of the material and geometrical properties are also examined.
As shown in Fig. 1, when a round link chain is subjected to large dynamic loads in the axial direction, impacting, elastic and plastic deformations will occur. It composes a typical viscoelastic system. In order to accurately simulate stiffness effects and energy dissipation, a nonlinear vibrational system is proposed for a round link chain with n links in this paper. As shown in Fig. 2, the model is based on the non-linear viscoelastic model in Ref12. In the model, the linear stiffness and nonlinear contact stiffness are modeled as an equivalent nonlinear stiffness. The energy dissipation in the contact process is expressed with equivalent damping. The total mass of the n links is simulated with a concentrated mass m.
Force diagram of the round link chain.
Equivalent dynamic model for a round link chain with n links.
In this way, the governing equations can be expressed as
where the inertial force (F_{m} = mddot{x}) and (x) is the displacement of the chain. The elastic force (F_{k} = k_{e} left( x right)x), (k_{e} left( x right)) is the equivalent nonlinear stiffness. The dissipated force (F_{c} = c_{e} left( x right)dot{x}) and (c_{e} left( x right)) is the nonlinear equivalent damping. In the model, the total mass m is known, while the nonlinear elastic and dissipated forces are needed to be determined.
As analyzed above, the equivalent nonlinear elastic force (F_{k}) can be divided into two parts, namely the linear elastic force and the nonlinear elastic force. The linear elastic force is deduced by the linear elastic deformation of the chain, while the nonlinear elastic force is due to the contact between the adjacent round links. One link of the round link chain is taken and analyzed to derive (F_{k}), as shown in Fig. 3. The round link is assumed to comprise homogeneous and isotropic elastic materials.
Force diagram of a round link in the chain, (a) geometry of the round link and (b) simplified force diagram.
For the linear elastic deformation of the round link, the assumption of infinitesimal strain theory is employed. Due to the deformation coupling of the curved segment BC in the round link, the application of axial load (F) will introduce axial force (N), bending moment (M) and shear force (Q) acting on the straight segment AB. Considering the symmetry of the round link and the axial load, the forces and moment can be defined as
The axial force (N_{c}), the moment (M_{c}), and the shear force (Q_{c}) acting on the curved segments are related to the subtended angle (theta) and can be expressed as
The total potential energy of the round link is composed of the potential energy (U_{AB}) stored in the straight segment and the potential energy (U_{BC}) for the curved segment. Thus, the total potential energy of the round link chain (U) can be obtained as
where, (E) is the elastic modulus and the shear modulus (G = {E mathord{left/ {vphantom {E {left( {2left( {1 + mu } right)} right)}}} right. kern-nulldelimiterspace} {left( {2left( {1 + mu } right)} right)}}). (mu) is the Poisson’s ratio.(A_{S}) is the cross-sectional area. (J_{1}) and (J_{2}) are the elastic section modulus of the straight and curved segments, respectively. They can be determined as
Since the geometry and axial load are assumed to be symmetric, the deformation condition at point A is given as
Substituting Eq. (4) into Eq. (6), the moment (M) is obtained as
where (k_{0} = {{left( {pi – 2} right)J_{1} R^{2} } mathord{left/ {vphantom {{left( {pi – 2} right)J_{1} R^{2} } {left( {2LJ_{2} + pi RJ_{1} } right)}}} right. kern-nulldelimiterspace} {left( {2LJ_{2} + pi RJ_{1} } right)}}). Substituting Eq. (7) into Eq. (4), the total potential energy (U) can be obtained as
Then, the linear elastic deformation (Delta L) of the round link can be expressed as
where (Delta L_{1}),(Delta L_{2}),and (Delta L{}_{3}) are defined as
The relationship between the linear elastic deformation and the equivalent elastic force is therefore established.
For the nonlinear elastic deformation due to contact, the Hertzian contact theory is used to derive the relationship between the indentation and the equivalent elastic force. As show in Fig. 4, the local indentation is induced between the adjacent round links subject to heavy axial loads. The principal radius of curvatures where the horizontal and vertical loops come into contact are defined as (rho_{1}) and (rho_{1}^{prime }), respectively. The other principal radius of curvatures are defined as (rho_{2}) and (rho_{2}^{prime }), respectively.
Diagram of local indentation deformations in the round link chain.
As the vertical and horizontal loops have the same geometry, the sum of the curvatures (rho) follows that12:
The local indentation is assumed as circles, and the radius (e) is much smaller than that of the curvature at the contact point. Hence, according to Hertzian contact theory, the radius (e) and the max stress in the contact area (sigma_{max }) can be given as
where the parameter (k_{1} = k_{2} = {{left( {1 – mu^{2} } right)} mathord{left/ {vphantom {{left( {1 – mu^{2} } right)} {left( {pi E} right)}}} right. kern-nulldelimiterspace} {left( {pi E} right)}}). The stress in the area of contact is given as follows:
The local deformations (delta_{1}) and (delta_{2}) at the contact area between the horizontal and vertical loops, respectively, are equal on the basis of symmetry. According to the geometrical relationship, the total contact-induced indentation deformation (delta) is obtained as
Assuming the displacement at point A of the round link is (x_{A}), which is a combination of the linear elastic deformation and the contacting indentation, the total displacement of the round link chain with n links (x) can be derived as
The equivalent nonlinear elastic force (F_{k}) can then be expressed as a function of the displacement (x). The equivalent nonlinear stiffness can also be obtained as
According to Eq. (1), the equivalent nonlinear damping for the round link chain can be expressed as
Since the inertial force (F_{m}) and equivalent nonlinear elastic force (F_{k}) have been expanded with respect to the displacement (x), the equivalent nonlinear damping (c_{e}) can be formulated, once the external force (F) and displacement (x) are tested in the experiment. This paper is focused on the round link chain in the scraper conveyer. In the practical working state, the fluctuating excitation is primarily induced by rotation of the driving system at some speed and initial deformations of the chain can also be observed due to transported coals. Thus, the external excitation can be taken as a simple harmonic motion, defined as
where (A) is the amplitude of the fluctuating displacement, (omega) is the angular velocity, and (x_{0}) is the initial deformation due to the pretension force. Thus, the output force corresponding to the excitation can be defined as
where (F_{0}) is the pretension force. (F_{A}) is the amplitude of the pulsatile force response, and (varphi) is the phase variation between the force and the displacement.
The nonlinear dissipated force (F_{c}) and corresponding equivalent nonlinear damping (c_{e}) can be obtained as
It can be found from Eq. (20) the equivalent nonlinear damping is a function of exciting frequency (omega) and the amplitude of the fluctuating displacement (A). In this paper, the polynomial approximation method is utilized to approximate the equivalent nonlinear damping (c_{e}). Since the highest power of both (omega) and (A) taken in (c_{e}) is 2, as shown in Eq. (20), (c_{e}) is expanded as
where the coefficients (alpha_{1}) and (alpha_{2}) are connected to the square of the velocity. (alpha_{3}) and (alpha_{4}) are connected to the velocity. (alpha_{5}) corresponds to the energy dissipation due to the pretension force. With five or more different experimental cases, all the coefficients can be determined and the equivalent nonlinear damping is then obtained. In order to improve the accuracy of the identified results, more than five experimental cases are used and the least square method for multiple variables are employed. Assuming there are M(M > 5) pairs of efficient test data and the fitted damping is (overline{c}_{e}), then the least square sum of the deviations (varphi) can be expressed as
where (x_{1i}),(x_{2i}),(x_{3i}) and (x_{4i}) are (omega_{i}^{2}),(omega_{i}),(A_{i}^{2}) and (A_{i}), respectively. To ensure (varphi) is the minimal, the partial derivatives of (varphi) with respect to the unknown coefficients are taken to be zero. The corresponding system of linear equations in a simple form is obtained as
where the elements in the matrix (G), and (C) are defined as
where (x_{5i} = 1). The coefficients for the nonlinear damping are then calculated.
In order to determine the coefficients for the equivalent nonlinear damping, an electronic universal tensile testing machine was employed to perform the dynamic tensile tests on the 14 × 50 round link chain used in mining applications. The circular chain is extracted from the coal mine of Shandong Energy Group. Figure 5 is the actual working condition of the circular chain used in the coal mine scraper conveyor. The schematic diagram of the experiment system is illustrated in Fig. 6. Harmonic displacement signals are generated by a signal generator controlled by a laptop. The signal is magnified by a power amplifier and drives the exciter to stretch the round link chain. In order to simulate practical loading conditions, a preload is firstly applied to ensure the round link chain is tensile condition in the test. The initial displacement, amplitude and frequency of the fluctuating load are set in the laptop. The total tensile force and displacement are measured by force sensor and displacement sensor, respectively. The measured signals are post processed by the data acquisition equipment and analyzed in the laptop.
Actual use of underground ring chain in coal mine.
The schematic diagram of the test system.
The round link chain in the test is made of 25MnSi steel (E = 210 Gpa) and the mass per unit length is m = 4.0 kg/m. The geometrical dimensions of the round link chain used in the tests are shown in Fig. 7. The number of the round links between the fixtures is 16 (n = 16), and the effective length of the chain between the fixtures was 800 mm. The ambient temperature during the test is 23 °C.
Dimensions of the round link.
In this part, the proposed theoretical model is employed to formulate the nonlinear stiffness of the 14 × 50 round link chain in the test. As shown in Fig. 8a, the stiffness of the round link chain is nonlinear with respect to the displacement x, especially when x is in the range from 0 to 3 mm. That is, when the axial deformation of each link is 0–0.3 mm, the nonlinearity of the stiffness is the strongest. With increase in the length of the chain, the stiffness and the nonlinearity are both weakened. When the displacement is large enough, the stiffness of the chain is inversely proportional to the length, which is the case for the linear elastic problems.
Parameter effects on the nonlinear stiffness, (a) effects of the total length and (b) effects of the elastic module with E0 = 2.1 × 105 Mpa and n = 16.
The influences of the material parameters on the stiffness of the chain are shown in Fig. 8b. A rise in the elastic module seems to reinforce the stiffness of the chain. Nevertheless, the stiffness is not any more proportional to the elastic module. The stiffness tends to be linear, when the material is more elastic.
In order to obtain the coefficients for the equivalent nonlinear damping, a series of experiments are performed, following the setup described in part 3. One of the tests is presented in detail to demonstrate the detailed identification procedure for the coefficients. In the case, (x_{0}), (A_{0}), (omega) and (k_{0}) are taken as 2.2 mm, 0.25 mm, 1.884 rad/s and 0.08973 mm/s, respectively. Thus, the displacement excitation is expressed as
Figure 9a shows time-varying curves for the total displacement of the round link chain, and the dynamic force responses are measured with the force senor, as shown in Fig. 9b. With increment in the deformation of the round link chain, the nonlinearity is weakened. Overall, the frequency of the force responses keeps in agreement with that of the exciting displacement. This phenomenon and the variation of the stiffness to the displacement coincide mutually.
The loading and responses in time domain.
The relationship between the force responses and the displacement excitation in the steady state is obtained, as shown in Fig. 10. The approach track is distinct from the restitution one, which implies that significate energy dissipation is observed in the vibration of the round link chain. Therefore, it is necessary to involve the damping property into the dynamic model of the round chain under axial excitation, especially if the load is relatively large, like the loads in the mining engineering.
Force–displacement curve.
According to the measured data for the dynamic force response, a fitting function in waveform is employed to derive the formula of the force with respect to time t, expressed as
It is worth noting that R-square for the fitting is equal to 0.9999 and the fitting is therefore accurate enough. Now that the displacement, the geometrical and material parameters for the tested round link chain are determined, then the equivalent elastic force of the chain can also yield based on Eq. (15). One can calculate the elastic force and then submit it to Eq. (20) at each time step to determine the damping. Alternatively, to simplify the calculation, the formulation of the elastic force can also be fitted in the similar way. According to Eq. (20), the dissipated force and corresponding damping coefficient can be derived by using the property of the trigonometric functions. In this case, (F_{c}) and (c_{e}) can be expressed as
As expressed in Eq. (21), the nonlinear damping depends on the amplitude and frequency of the external excitation source. A series of experiments are needed to get the coefficients in Eq. (21). Hence, with the same experimental model (the 14 × 50 round link chain), 9 different tests were implemented based on the aforementioned experimental setup. Corresponding damping properties are determined with the similar framework presented ahead, as listed in Table 1.
A two-variable second-order polynomial equation is defined to fit the equivalent damping of the round link chain, as shown in Eq. (21). According to Eq. (23), the data in Table. 1 is utilized to calculate the coefficients in Eq. (21). The coefficients are finally obtained as
As shown in Fig. 11, the damping is significant at low frequencies, while increase in frequency leads to decrease in the damping. However, when the frequency rises over about 12.5 Hz, the damping increases rapidly and it tends to be more significant at high frequencies. It may be because that the energy dissipation mainly lie in the plastic deformation of the round link in the low frequency range, while at high frequencies, friction and pounding play a major role in dissipating energy.
The nonlinear damping properties with respect to vibration amplitude and frequency.
In order to validate the proposed framework for determination of the dynamic parameters of the round link chain, another test is implemented. Totally different key parameters are taken for the simulated harmonic displacement load to make sure the validation is accurate. The initial displacement (x_{0} = 2.25;{text{mm}}), the loading frequency (f = 7;{text{Hz}}), and the amplitude (A = 0.32;{text{mm}}). Then displacement excitation turns to be (x = 2.25{ + 0}{text{.32}}sin left( {14pi t} right)). According to Eq. (15), the elastic force (F_{k}) is obtained, and the damping can be given by submitting (A = 0.32;{text{mm}}) and (f = 7;{text{Hz}}) into Eq. (21). According to Eq. (1), the force response is then determined. The curves for the force response to the exciting displacement are employed to analyze the accuracy of the proposed method. The proposed result is compared with the experimentally measured curve, as shown in Fig. 12. Good agreement is observed between the proposed and experimental results.
Comparison between the measured results and the prediction curve.
This paper presents a new framework to identify the nonlinear stiffness and damping properties of a round link chain under axial dynamic excitation. A modified nonlinear viscoelastic model is developed to study vibrations of the chain with numbers of round links. Based on linear elastic theory and contacting models, a theoretical model is established for the equivalent nonlinear stiffness, including elastic and contacting deformation effects. A series of dynamic experiments are performed and accordingly, the least square fitting method is employed to determine the equivalent damping of the chain. Another test case with totally different loading parameters is designed to validate the proposed framework and the proposed results agree well with the experimental ones. The effects of key material and loading parameters on the nonlinear stiffness and damping are examined. It is found with small dynamic deformations the stiffness is strong nonlinear to the deformation, and the nonlinearity will turn to small if the deformation or the length of the chain increase, or the elasticity of the chain decrease. Due to transformation of the main manners of the energy dissipation, the nonlinear damping is firstly decreased with rise in the loading frequency. However, when the frequency increase over a critical one, the damping turns to increase. That is, the nonlinear damping is significant at both low and high frequencies, while it is relatively small in the middle frequency range. The developed identification framework and proposed results can provide some physical insights into the dynamic properties of the round chain and can help improve the performance of the machines such as the scraper conveyor.
Due to the ongoing project of the team, the data sets obtained during the current study are temporarily not public, but can be obtained from the corresponding authors according to reasonable requirements.
Wang, F. Dynamic predication and analysis on mooring Maneuver of ship. J. Shanghai Jiaotong Univ. (Chin. Ed.) 46(8), 1210–1217 (2012).
ADS  Google Scholar 
Wang, R., Wang, D., Zhu, H., Zhu, Z. & Zhang, D. Wear analysis for ring chain of a heavy-load scraper conveyor under different environment media. Tribol. Trans. 64(2), 214–228 (2021).
CAS  Article  Google Scholar 
Zhang, Q., Gu, J., Liu, J. & Tian, Y. Temperature effect on the impact characteristics of mine ring chain under different working conditions. Strength Mater. 53, 189–197 (2021).
Article  Google Scholar 
Li, M., Xue, H. & Yang, J. Stress analysis of mining round-link chain. J. Xian Min. Inst. 16, 165–168 (1996).
Google Scholar 
Li, J. & Ma, Q. Mechanical characteristics of scraper chain transmission system under the condition of chain blocked. J. China Coal Soc. 43(S2), 591–599 (2018).
MathSciNet  Google Scholar 
Bian, X., Gong, Y. & Gao, L. Contact analysis and simulation of high performance round link chain. Int. J. Wirel. Mobile Comput. 16(3), 241–246 (2019).
Article  Google Scholar 
Li, S. Study on dynamic characteristics of chain transmission system of scraper conveyor. In Xi’an University of Science and Technology (2019).
Diao, S. Study on the stress character of the roller chains. J. Wuyi Univ. 11, 39–43 (1997).
Google Scholar 
Wang, D., Zhang, J., Zhu, Z., Gang, S. & Li, X. Crack initiation characteristics of ring chain of heavy-duty scraper conveyor under time-varying loads. Adv. Mech. Eng. 11, 9 (2019).
Article  Google Scholar 
Zhang, Q., Wang, H. & Guo, T. Fatigue damage of V-lock chain ring under random load. Polish Maritime Res. 23, 4–9 (2016).
Article  Google Scholar 
Stavros, A. Anagnostopoulos. Equivalent viscous damping for modeling inelastic impacts in earthquake pounding problems. Earthq. Eng. Struct. Dyn. 33(8), 897–902 (2004).
Article  Google Scholar 
Jankowski, R. Non-linear viscoelastic modelling of earthquake induced structural pounding. Earthq. Eng. Struct. Dyn. 34(6), 595–611 (2005).
Article  Google Scholar 
Muthukumar, S. & DesRoches, R. A Hertz contact model with non-linear damping for pounding simulation. Earthq. Eng. Struct. Dyn. 35(7), 811–828 (2006).
Article  Google Scholar 
Khatiwada, S., Chouw, N. & Butterworth, J. A generic structural pounding model using numerically exact displacement proportional damping. Eng. Struct. 3, 62–63 (2014).
Google Scholar 
Zhang, J., Chen, H. & Li, D. Nonlinear dynamical model of a soft viscoelastic dielectric elastomer. Phys. Rev. Appl. 8(6), 064016 (2017).
ADS  Article  Google Scholar 
Turkes, E. et al. A new process damping model for chatter vibration. Measurement 44(8), 1342–1348 (2011).
ADS  Article  Google Scholar 
Turkes, E. et al. Decomposition of process damping ratios and verification of process damping model for chatter vibration. Measurement 45(6), 1380–1386 (2012).
ADS  Article  Google Scholar 
Xie, Z. et al. Experimental and numerical exploration on the nonlinear dynamic behaviors of a novel bearing lubricated by low viscosity lubricant. Mech. Syst. Signal Process. 182, 109349 (2023).
Article  Google Scholar 
Yang, K., Yang, W., Cheng, G. & Lu, B. A new methodology for joint stiffness identification of heavy duty industrial robots with the counterbalancing system. Robot. Comput. Integr. Manufact. 53, 58–71 (2018).
Article  Google Scholar 
Fan, S. & Fan, S. Approximate stiffness modelling and stiffness defect identification for a heavy-load parallel manipulator. Robotica 37(6), 1120–1142 (2019).
Article  Google Scholar 
Jin, C., Li, G., Hu, Y., Xu, Y. & Xu, L. Identification of mechanism stiffness of autoeliminating clearance for auxiliary bearing. Tribol. Trans. 62(2), 154–163 (2019).
CAS  Article  Google Scholar 
Liu, L., Zhang, Y., Liu, G. & Xu, W. Variable motion mapping to enhance stiffness discrimination and identification in robot hand teleoperation. Robot. Comput. Integr. Manufact. 51, 202–208 (2018).
Article  Google Scholar 
Zhao, Z., Banda, K. & Guo, B. Simultaneous identification of damping coefficient and initial value for PDEs from boundary measurement. Int. J. Control 91(7), 1508–1521 (2017).
MathSciNet  Article  Google Scholar 
Wang, J., Chen, T., Wang, X. & Xi, Y. Dynamic identification of tangential contact stiffness by using friction damping in moving contact. Tribol. Int. 131, 308–317 (2019).
Article  Google Scholar 
Xu, X., Augello, H. & Yang, H. The generation and validation of a CUF-based FEA model with laser-based experiments. Mech. Adv. Mater. Struct. 2019, 1–8 (2019).
Google Scholar 
Xu, X., Yang, H. & Augello, C. Optimized free-form surface modeling of point clouds from laser-based measurement. Mech. Adv. Mater. Struct. 2019, 1–9 (2019).
Google Scholar 
Yang, H. & Xu, X. Multi-sensor technology for B-spline modelling and deformation analysis of composite structures. Compos. Struct. 244, 111000 (2019).
Article  Google Scholar 
Lee, D. et al. An optical measurement technique for dynamic stiffness and damping of precision spindle system. Measurement 131, 61–68 (2019).
ADS  Article  Google Scholar 
Lisitano, D., Bonisoli, E. & Mottershead, J. Experimental direct spatial damping identification by the stabilised layers method. J. Sound Vib. 437, 325–339 (2018).
ADS  Article  Google Scholar 
Budak, E. & Tunc, L. Identification and modeling of process damping in turning and milling using a new approach. Cirp Ann. Manufact. Technol. 59(1), 403–408 (2010).
Article  Google Scholar 
Romdhane, M. et al. The loss factor experimental characterisation of the non-obstructive particles damping approach. Mech. Syst. Signal Process. 38(2), 585–600 (2013).
ADS  Article  Google Scholar 
Download references
This work was supported by the National Natural Science Foundation of China (No. 52104134), the China Postdoctoral Science Foundation under Grant 2020M682268, the Major Science and Technology Innovation Projects in Shandong Province under Grant 2019SDZY04, Shandong Provincial Natural Science Foundation (Grant No. ZR2020QA044) and the State Key Laboratory of Mechanical System and Vibration (Grant no. MSV202109).
Shandong Provincial Key Laboratory of Robotics and Intelligent Technology, Shandong University of Science and Technology, Qianwangang Road 579, Qingdao, 266590, Shandong Province, China
Kun Zhang, Zhengxian Sun, Jinpeng Su & Mingchao Du
Shandong Energy Group, Jingshi Road 10777, Jinan, 250014, Shandong Province, China
Kun Zhang & Xuntao Wei
School of Mechanical Engineering, Liaoning Technical University, Yulong Road 88, Fuxin City, 123000, Liaoning Province, China
Kun Zhang & Hongyue Chen
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
K.Z. and J.S. conducted relevant experiments and completed the writing of the paper, Z.S. and X.W. assisted the experiment and completed the data collection, M.D. and H.C. deduced the equation and completed the drawing of relevant icons.
Correspondence to Jinpeng Su.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Zhang, K., Sun, Z., Su, J. et al. Identification and modelling of dynamic parameters for round link chains subject to axial loads. Sci Rep 12, 16155 (2022). https://doi.org/10.1038/s41598-022-19207-3
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-19207-3
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Scientific Reports (Sci Rep) ISSN 2045-2322 (online)
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

source

How to Edit a Podcast in Descript

‘Jeopardy!’ Looks To Expand Franchise With Master League – Deadline

By Lynette Rice
Senior TV Writer/TV Editor, Awards
For fans who can’t get enough of the Jeopardy! franchise, Executive Producer Michael Davies has some promising news for you.
Now that a revival of Celebrity Jeopardy! is off the ground, Davies is flirting with other off-shoots like a masters league that features the show’s winningest players, and maybe even a spinoff focused solely on sports and pop culture trivia.
“What we really need to develop is the pro-level version of the game,” Davies told the New York Times. “It seemed ridiculous to me that we have this sport where every single year we take all of our best players — we take our LeBrons and our Dwyanes — and we switch them all out.”

Davies would even like to air the masters league live. “That makes a lot of my staff nervous,” he said to the paper.
The franchise has already begun filming a Second Chance Tournament that will bring back promising contestants, as well as a revamped Tournament of Champions. There’s lots of other distractions in the works for Jeopardy! hungry viewers, like a podcast and a hall of fame for the show’s best players.
“I don’t think there’s ever really been a game show that has really listened to its fans the way that Jeopardy! is currently doing,” former contestant-turned-game show journalist Cory Anotado told the NYT.
Subscribe to Deadline Breaking News Alerts and keep your inbox happy.
Signup for Breaking News Alerts & Newsletters
Get our latest storiesin the feed of your favorite networks
We want to hear from you! Send us a tip using our annonymous form.
Sign up for our breaking news alerts
Deadline is a part of Penske Media Corporation. © 2022 Deadline Hollywood, LLC. All Rights Reserved.

source

The best new free music-making software: essential freeware synths, drum machines and effects for October 2022 – MusicRadar

MusicRadar is supported by its audience. When you purchase through links on our site, we may earn an affiliate commission. Here’s why you can trust us.
Did somebody say free plugins? It’s our monthly round-up of the most fantastic freeware for producers on a budget
Everybody loves a free plugin. We’d wager that even the most affluent music-makers, smugly reclining in their padded studio chairs while they bask in the radiant glow of a specced-out M1 Mac, feel a twinge of excitement when a gratuitous VST pops up on their 6K Retina display. 
This is our monthly free software round-up’s raison d’être. It exists to serve you, the sonically curious and financially prudent producer, in your pursuit of the internet’s finest freeware. We know you’re a busy bunch, so here we present the most intriguing freebies from our regular news coverage that you may have missed, plus anything else that’s caught our eyes (and ears) over the past 30 days. 
• The best free music software and plugins: DAWs, synths effects and more
Platforms: Mac/PC | Formats: Standalone | Download

Having previously worked on a synth with Novation and a microtuning plugin with Oddsound, Aphex Twin (AKA Richard D. James) has now released a free “custom sample mashing app” known as Samplebrain.aphex twinAphex Twin: “I hate the idea of using other people’s equipment – I’ve just got a bit obsessed, I suppose”
This open-source software works by chopping samples up into a ‘brain’ of small, interconnected sections called blocks, which are grouped into a network based on their similarity. This then processes a target sample, chopping it up into blocks in the same way, and attempts to match each block with one in its brain for realtime playing. The idea is that you’re interpreting one sound with another.
Discussing the origins of the software (it’s actually been in development since 2015) and what it’s capable of, Aphex Twin said (opens in new tab): “What if you could reconstruct source audio from a selection of other MP3s/audio on your computer? What if you could build a 303 riff from only a cappellas or bubbling mud sounds? What if you could sing a silly tune and rebuild it from classical music files? You can do this with Samplebrain.”
Platforms: PC | Formats: VST2/VST3 | Download
It’s a shame this one’s PC-only, because everybody should be able to take advantage of this powerful, experimental free drum machine plugin. Here’s the lowdown: Off-Grid is based around seven channels, each of which is equipped with four cells, or voices. 
Each cell can be independently controlled and holds one of the plugin’s 448 built-in sounds, which can be reversed, looped and pitch-shifted as you please. That’s not all – there’s a ton of potential for randomization, meaning glitchy, unpredictable drum grooves are just a click away.
Platforms: Mac/PC | Formats: VST3/AU | Download (opens in new tab)
You may already be familiar with the sound of OTT (over-the-top) compression, but now Sixth Sample and Integraudio are giving you the effect for free with their new Cramit plugin. Many will know the term OTT from the name of a preset in Ableton Live’s multiband compressor, and it’s also been adopted by third-party plugin manufacturers such as Slate Digital and Xfer Records. 
Sixth Sample’s take on the concept gives you three bands of upwards/downwards compression and expansion, and also enables you to apply seven types of distortion (pre or post) that are integrated into a single control. You also get 10 factory presets and a resizable interface.tessla proPlatforms: PC | Formats: VST | Download (opens in new tab)

Nothing beefs up a mix like a tasty bit of analogue saturation, but not all of us can afford a smorgasbord of outboard. Enter TesslaPRO. This Windows-only saturator updates Variety of Sound’s TesslaPRO plugin for a third iteration, bringing the rich tones of classic transformer-based circuit designs of yore straight into the modern era. 
Aimed at mixing and mastering engineers nostalgic for the “extra vibes” delivered by highend analogue equipment, TesslaPRO blesses your audio with those all-important artifacts, bringing depth, dimension and warmth where it’s needed.movementronPlatforms: PC | Formats: VST3 | Download (opens in new tab)

Have you ever found yourself at a creative standstill? Stuck in a production rut? Fear not, because Movementron, a free synth from Flandersh Tech, is all about movement. 
This dual-oscillator gem enables you to sequence your choice of waveforms over 8 steps, creating complex, evolving patterns with the first oscillator, while the second allows you to draw your own waves into the plugin. Flandersh Tech have even thrown in a sequence-able filter, LFO, compressor, delay and reverb too. Neato. 
Platforms: Mac/PC | Formats: VST3/AU | Download (opens in new tab)
Most DAWs come bundled with a free filter plugin, but these are often pretty basic and uninspiring. When you’ve maxed out your stock filter’s capabilities, it’s a good idea to test the waters with something new. A great place to start would be TheWaveWarden’s Filter Force Free, a free version of their (still fairly cheap, at €29) Filter Force Pro plugin. 
This dual filter shines in its modulation capabilities, offering producers two sequencer lanes for rhythmic filter manipulation that’ll generate life and movement in your source audio. The free version’s restricted to two filter types, but it’s a decent plugin nonetheless.

Platforms: Mac/PC | Formats: Kontakt | Download
Every so often a free plugin comes along that stops us in our tracks. Aria Libera is one of those plugins. A Kontakt instrument from Sonora Cinematic, it’s based around  a collection of recordings of vocalist Emma May Price, that have been processed through a granular modular synthesizer. Haunting and ethereal, this one will add a touch of mood and colour to any track. 
Current page: October 2022
I’m the Tech Features Editor for MusicRadar, working on everything from artist interviews to tech tutorials. I’ve been writing about (and making) electronic music for over a decade, and when I’m not behind my laptop keyboard, you’ll find me behind a MIDI keyboard or a synthesizer. 
Don’t miss the latest deals, news, reviews, features and tutorials
Thank you for signing up to Musicradar. You will receive a verification email shortly.
There was a problem. Please refresh the page and try again.
MusicRadar is part of Future plc, an international media group and leading digital publisher. Visit our corporate site (opens in new tab).
© Future Publishing Limited Quay House, The Ambury, Bath BA1 1UA. All rights reserved. England and Wales company registration number 2008885.

source

This pilot program will be required for Marine master, first sergeants – Marine Corps Times

A new Marine Corps pilot program aims to supplement the limited amount of time enlisted service members are given for professional military education, according to the most senior enlisted member of the Marine Corps.
The program ― previously a voluntary course for senior enlisted Marines ― is now being tested as a part of the standard course load for E-8 service members.
“We developed the Senior Enlisted Blended Seminar Program comprised of eight weeks of nonresident seminar instruction followed by a two-week resident session, and it will be a requirement for First Sergeants and Master Sergeants,” Sergeant Major of the Marine Corps Troy Black said in a statement to Marine Corps Times. “The program is currently in a pilot phase.”
“The SEBSP leverages lessons from the Marine Corps University’s College of Distance Education and Training, delivered blended programs for Expeditionary Warfare School and Command and Staff College Distance Education Programs,” he said.
First announced in February, the previously voluntary six-week course was “neither available to the majority of the E-8 population nor a PME requirement for promotion,” according to a MARADMIN post.
Another weeklong required seminar for promotion to E-9 also will be phased out, the February MARADMIN added, though a timeline on this hasn’t been announced.
While the Marine Corps’ professional military education program has evolved over time, this combined in-person and online seminar is being considered a favorable step forward to expand higher learning opportunities for enlisted Marines.
Black briefly spoke about the pilot program, and the status of enlisted professional military education in the Marine Corps, to a group of service members in an hourlong podcast conversation on Sept. 16 at the Marine Corps University’s Brute Krulak Center for Innovation & Future Warfare in Quantico, Virginia.
As the event was hosted at the institutional home to the service’s enlisted professional military education program, Black was asked for his perspective on what has and hasn’t been working in the pipeline.
Black shared that the limited amount of time currently invested for Marines, a period which he said adds up to roughly 22 weeks, remains a challenge.
“Time is the only constraint, not the desire for the curriculum that we have,” said Black, who noted that the Marine Corps recently conducted a servicewide assessment of all its enlisted professional military education curriculum.
In comparison, at the officer level, the Expeditionary Warfare School provides a 41-week educational program.
Other subjects discussed in the conversation included Force Design 2030 and the culture of the Marine Corps.
“We’re working on a draft right now of a document that’s going to in black and white determine what our ethos and culture is,” said Black, emphasizing that the Marine Corps is focused on being a war-fighting organization.
There is no set publication date for this document, Black said, and it is not associated with Force Design 2030.
Jonathan is a staff writer and editor of the Early Bird Brief newsletter for Military Times. Follow him on Twitter @lehrfeld_media
Marine Corps Times © 2022
Marine Corps Times © 2022

source

Audio Description (AD) – RNIB

A basic RNIB guide explaining what audio description is and how it is used by blind and partially sighted people. Audio Description on TV can make programmes more accessible.
Audio description, or AD, is a spoken description of the visuals happening on screen to help blind and partially sighted viewers follow the story. It describes elements like facial expressions, movement, gestures, body language and activity. The voice used for AD is a real person.
AD can be used on most UK based broadcast channels like BBC, ITV, Sky and catch-up services like BBC iPlayer, ITV Hub, 4 On Demand.
Audio description in cinema is possible via the use of headsets at most movie theatres.
Streaming services like Amazon Prime and Netflix also provide audio description.
AD is useful if you do not have enough vision to see what is happening but want to be able to tell what is going on during the visual parts a television broadcast, film or documentary.
Without the use of AD, a blind person can miss out on various story lines and plots as the physical actions can be just as significant as the dialogue. AD paints an audio picture of the onscreen content, helping blind or partially sighted people enjoy and experience television programs and films just as sighted people do.
If you have a question about living with sight loss we’re here to offer support.
Call 0303 123 9999
“Alexa, call RNIB Helpline” on Alexa-enabled devices
Most mainstream televisions available today have accessibility features built into them which help to make TV for visually impaired users accessible
We're open 8am – 8pm on weekdays and 9am – 1pm on Saturdays
Email us at [email protected] or say: "Alexa, call RNIB Helpline"

source

After years of decline, the auto industry in Canada is making a comeback – WUNC

RACHEL MARTIN, HOST:
The U.S. gets all the attention for car manufacturing in North America. But after years of decline, that industry is making a comeback in Canada. NPR’s H.J. Mai traveled to Ontario to find out why.
H J MAI, BYLINE: I’m in the Canadian city of Windsor, Ontario, just across the river from Detroit. The truck traffic on the Ambassador Bridge connecting the two cities shows the economic importance of their close, cross-border tie. It’s only when I spot the roughly three dozen Tim Hortons locations, a popular Canadian coffee and doughnut chain, that I realize I’m not in the U.S. anymore.
UNIDENTIFIED PERSON: Could I get a Double Double myself?
MAI: Windsor has benefited from this close connection to Detroit and the big three carmakers that are located there. It’s been the city’s economic engine for more than 100 years. And President Biden’s landmark climate bill, known as the Inflation Reduction Act, promises to accelerate Windsor’s re-emergence as an automotive heavyweight.
DREW DILKENS: Companies that are looking at the new world of automotive and figuring out what role they’re going to play, they’re going to start looking at Windsor-Essex as a place to do business.
MAI: Mayor Drew Dilkens says Windsor is humming again, as new production lines open and additional shifts return. A multibillion-dollar investment from Stellantis, the maker of Chrysler cars, and South Korea’s LG to build a new battery factory in town is further proof that things are trending up.
DILKENS: Five billion dollars, 3,000 jobs – it is not a small, little investment. For a community like ours, it is a massive, game-changing investment. And I’m not even sure those two words are quite, you know, big enough.
MAI: The U.S. climate legislation adds yet another gear. It provides tax credits to EV buyers, but only if the cars and batteries are largely made in North America, and the materials used in batteries, such as lithium or nickel, are mine locally. This gives Canada a clear advantage, according to GM Canada’s David Paterson.
DAVID PATERSON: Our supply chains in North America have been global in the past. Now we have an opportunity to bring some of that back, more to North America, as we shift to making batteries.
MAI: But the industry faced a number of challenges during the past two decades. Like Michigan, Ontario’s auto sector was hit hard by increased automation and the NAFTA trade agreement, as carmakers moved their assembly lines to places like Mexico. Windsor posted some of the highest unemployment numbers in the province for a while.
ANGELO DICARO: We’ve seen disinvestment in the sector. We’ve seen job losses in the sector. We’ve seen plants closed and communities basically disappear as a result of that.
MAI: Angelo DiCaro is the director of research for Unifor, a union that represents roughly 230,000 Canadian auto workers. But change is in the air, and car companies have taken notice, says Flavio Volpe, president of the Canadian Auto Parts Manufacturers’ Association.
FLAVIO VOLPE: Ontario, in the last 18 months, has had the greatest run of new investment in vehicle production in its entire history.
MAI: Ontario has attracted more than $16 billion in planned investments during the past year and a half, yet competition – especially from the U.S. – remains high. Canada’s auto sector is also highly dependent on U.S. buyers, with nearly 80% of cars produced in the country ending up on American roads. Nevertheless, Volkswagen and Tesla both publicly confirmed they are looking at Canada as a potential site for a new battery plant, and that’s got Canada feeling optimistic about the future.
PATERSON: Let’s work our way through this. Let’s make the transition to electric. Let’s optimize the system as best we can. And then let’s take on the world.
MAI: Canada wants to become a global hub for electric vehicle and battery production, and it is laying the groundwork now.
H.J. Mai, NPR News, Windsor, Ontario.
(SOUNDBITE OF MUSIC) Transcript provided by NPR, Copyright NPR.

source

Short Interest in VictoryShares US EQ Income Enhanced Volatility Wtd ETF (NASDAQ:CDC) Declines By 51.0% – MarketBeat

Sign up for MarketBeat All Access to gain access to MarketBeat’s full suite of research tools:
VictoryShares US EQ Income Enhanced Volatility Wtd ETF (NASDAQ:CDC – Get Rating) saw a large decline in short interest during the month of September. As of September 15th, there was short interest totalling 35,000 shares, a decline of 51.0% from the August 31st total of 71,500 shares. Based on an average trading volume of 210,500 shares, the short-interest ratio is presently 0.2 days.

VictoryShares US EQ Income Enhanced Volatility Wtd ETF Trading Down 0.8 %

Shares of VictoryShares US EQ Income Enhanced Volatility Wtd ETF stock opened at $60.30 on Wednesday. The firm has a fifty day moving average of $66.74 and a two-hundred day moving average of $68.58. VictoryShares US EQ Income Enhanced Volatility Wtd ETF has a 52 week low of $60.06 and a 52 week high of $74.46.

VictoryShares US EQ Income Enhanced Volatility Wtd ETF Increases Dividend

The firm also recently announced a monthly dividend, which was paid on Tuesday, September 13th. Shareholders of record on Monday, September 12th were given a dividend of $0.259 per share. This is a boost from VictoryShares US EQ Income Enhanced Volatility Wtd ETF’s previous monthly dividend of $0.08. The ex-dividend date of this dividend was Friday, September 9th. This represents a $3.11 annualized dividend and a dividend yield of 5.15%.

Institutional Trading of VictoryShares US EQ Income Enhanced Volatility Wtd ETF

Institutional investors and hedge funds have recently made changes to their positions in the business. Westside Investment Management Inc. bought a new stake in shares of VictoryShares US EQ Income Enhanced Volatility Wtd ETF during the 2nd quarter valued at $26,000. Accel Wealth Management bought a new stake in shares of VictoryShares US EQ Income Enhanced Volatility Wtd ETF in the 1st quarter valued at $130,000. Clearview Wealth Advisors LLC bought a new stake in shares of VictoryShares US EQ Income Enhanced Volatility Wtd ETF in the 1st quarter valued at $135,000. Horizons Wealth Management bought a new stake in shares of VictoryShares US EQ Income Enhanced Volatility Wtd ETF in the 2nd quarter valued at $397,000. Finally, Private Trust Co. NA bought a new stake in shares of VictoryShares US EQ Income Enhanced Volatility Wtd ETF in the 2nd quarter valued at $459,000.

Further Reading

This instant news alert was generated by narrative science technology and financial data from MarketBeat in order to provide readers with the fastest and most accurate reporting. This story was reviewed by MarketBeat’s editorial team prior to publication. Please send any questions or comments about this story to [email protected].
Before you consider VictoryShares US EQ Income Enhanced Volatility Wtd ETF, you’ll want to hear this.
MarketBeat keeps track of Wall Street’s top-rated and best performing research analysts and the stocks they recommend to their clients on a daily basis. MarketBeat has identified the five stocks that top analysts are quietly whispering to their clients to buy now before the broader market catches on… and VictoryShares US EQ Income Enhanced Volatility Wtd ETF wasn’t on the list.
While VictoryShares US EQ Income Enhanced Volatility Wtd ETF currently has a “N/A” rating among analysts, top-rated analysts believe these five stocks are better buys.
View The Five Stocks Here
Complete the form below to receive the latest headlines and analysts’ recommendations for your stocks with our free daily email newsletter:
Axel Merk, President and CIO of Merk Investments has three very different stocks he frames within the current market and economic conditions.
Sign up for MarketBeat All Access to gain access to MarketBeat’s full suite of research tools:
View the latest news, buy/sell ratings, SEC filings and insider transactions for your stocks. Compare your portfolio performance to leading indices and get personalized stock ideas based on your portfolio.
Get daily stock ideas from top-performing Wall Street analysts. Get short term trading ideas from the MarketBeat Idea Engine. View which stocks are hot on social media with MarketBeat’s trending stocks report.
Identify stocks that meet your criteria using seven unique stock screeners. See what’s happening in the market right now with MarketBeat’s real-time news feed. Export data to Excel for your own analysis.
MarketBeat All Access subscribers can access stock screeners, the Idea Engine, data export tools, research reports, and other premium tools.
Looking for new stock ideas? Want to see which stocks are moving? View our full suite of financial calendars and market data tables, all for free.
Receive a free world-class investing education from MarketBeat. Learn about financial terms, types of investments, trading strategies and more.
As Featured By:
MarketBeat empowers individual investors to make better trading decisions by providing real-time financial data and objective market analysis. Whether you’re looking for analyst ratings, corporate buybacks, dividends, earnings, economic reports, financials, insider trades, IPOs, SEC filings or stock splits, MarketBeat has the objective information you need to analyze any stock. Learn more about MarketBeat.
Twitter Facebook StockTwits Financial Juice YouTube
MarketBeat is accredited by the Better Business Bureau MarketBeat is rated as Great on TrustPilot
© American Consumer News, LLC dba MarketBeat® 2010-2022. All rights reserved.
326 E 8th St #105, Sioux Falls, SD 57103 | [email protected] | (844) 978-6257
MarketBeat does not provide personalized financial advice and does not issue recommendations or offers to buy stock or sell any security.

Our Accessibility Statement | Terms of Service | Privacy Policy | Do Not Sell My Information | RSS Feeds

© 2022 Market data provided is at least 10-minutes delayed and hosted by Barchart Solutions. Information is provided ‘as-is’ and solely for informational purposes, not for trading purposes or advice, and is delayed. To see all exchange delays and terms of use please see Barchart’s disclaimer.

source

New studio Embark announces new free-to-play shooter, The Finals – Polygon

Filed under:
Nexon-backed Embark Studios shows its first game, a Running Man-style game show
Four years ago, Electronic Arts’ chief design officer left to co-found his own studio, created with Nexon’s backing. On Monday, Patrick Söderlund’s studio showed off its first game: The Finals, a squad-based, free-to-play multiplayer shooter inspired by sci-fi bloodsport narratives like Squid Game and The Running Man, where pretty much everything on the game’s maps can be destroyed.
The Finals, said Embark Studios creative director Gustav Tilleby, is “a hero builder, not a hero shooter.” As shown in a debut trailer, players will have access to a variety of weapons and their tactical uses, from a katana and other melee weapons, to rocket launchers, and even a foam gun that can reinforce crumbling walls or build a bridge to higher ground.
“We want to build a game that provides players with the tools to meaningfully interact, change, and use their world,” Tilleby said. “So, this is a shooter; it’s a game where aiming and shooting is important. But it’s also a game where the players can use the environment, and adapt to changes in the environment.”
“We want The Finals to be a game about intuitiveness; wherever you think something should work, it probably will,” Tilleby said. Hence the comprehensive destruction players can wreak all over the map. A standard match in The Finals will feature four teams of three players each. It is “not a battle royale, it’s not a military sim,” Tilleby emphasized.
Stockholm-based Embark Studios was co-founded in 2018 by Söderlund and Rob Runnesson, who is also Embark’s chief creative officer. Originally, Embark’s first game was to have been ARC Raiders, a free-to-play, third-person sci-fi shooter that was announced in December at The Game Awards 2021. In August, Embark announced ARC Raiders was delayed into 2023; but something codenamed “Project Discovery” — which is The Finals — “has progressed faster than we first imagined,” Söderlund said, moving its development and launch planning up on the schedule.
The Finals’ fully destructible environments “means there’s plenty of chaos to go around,” Tilleby said. He called the maps “hyper-realistic virtual playgrounds,” that are “based on iconic real world locations.” One shown Monday was based on the Hotel Monaco in Monte-Carlo, for example (though Embark wasn’t giving out any details on where else the game will be heading).
The environments will have changing weather and time of day to further differentiate each match. Players can destroy furniture and scenery, or entire buildings themselves, by blowing out a load-bearing wall and watching the rest of the structure come pancaking down. “You can interact with physical objects, you can pick them up and throw them, set things on fire,” Tilleby said.
The key innovation behind all of this destruction, Tilleby said, is that all of it runs on The Finals’ servers, as opposed to their clients’ hardware. This is what makes collapsing a whole building possible, Tilleby said. “Server-side movements and destruction is another thing we’ve been chasing for a long time,” he added. “In a multiplayer space, it opens up so many possibilities. It’s kind of like a holy grail.”
Player avatars will, of course, be endlessly customizable both in appearance and performance. “You can be nimble, kind of [like a] ninja, go up onto the rooftops and take down enemies with a katana, or you can be a heavy, a tank, with a rocket launcher. It’s really up to you.” Yes, the game “will definitely have a form of battle pass,” Tilleby said. In Monday’s briefing, we saw players dressed in ballerina tutus and samurai armor, among many other outfits.
The Finals will stage a closed alpha beginning Thursday, Sept. 29 and running until 3 a.m. EDT on Monday, Oct. 3. Embark is taking registrations for the PC alpha (via Steam) right now, but says the player population will be limited and not everyone will be admitted. (When The Finals launches in full, it will also come to PlayStation 5 and Xbox Series X). Players can expect to play a game that has bugs and balance issues, and they’re being asked not to stream their play (although sharing written impressions is fine). The alpha will run in Europe and North America.
The Finals does not yet have a launch date or window; Embark is planning larger-scale alpha and beta tests after the one this coming weekend.
A weekly roundup of the best things from Polygon
Please check your email to find a confirmation email, and follow the steps to confirm your humanity.
Oops. Something went wrong. Please enter a valid email and try again.
Filed under:
Please check your email to find a confirmation email, and follow the steps to confirm your humanity.
Oops. Something went wrong. Please enter a valid email and try again.

source

Wacom Intuos Pro Tablet Review: A Tablet Meant For More Than Drawing – Magnetic Magazine

Wacom has long been a global industry leader in creative drawing tablets. Digital artists have gone as far as to say that Wacom is the best drawing tablet in its market, but they're not the only ones finding amazing days to use these powerful tools.
Because as technology advances, Wacom's features have been able to integrate into other vocations like music production and more. How do I know this? Because we got our hands on Wacom's Intuous Pro model and tested it out over a week or so and I quickly discovered how powerful of a workflow tool this thing can be.
And while Wacom released the original unit in 2019, we decided there is no better time than now to look at this powerful Tablet to determine who this is made for and if it's still worth the purchase today.
The packaging for the Wacom Intuos Pro is very well done and protects the contents perfectly. There is no way that the device or accessories can be damaged when shopping in specialist shops or by post. The box has an outer slipcase, and inside the box, everything is packed securely.
We find the following accessories in addition to the Wacom Intuos Pro: a pen, a pen holder with spare refills, a USB cable, the wireless kit (transmitter and battery), instructions, and the driver CD. We appreciate the pen holder and the integrated wireless kit as two advantages of this product range.
The Wacom Intuos Pro craftsmanship is impeccable at first glance. Its sleek design makes me excited to bust this thing out and start integrating it into my studio and creative workflow.
The Wacom Intuos Pro comes with the Pro Pen 2, which is very similar to an actual pen in appearance and feel. The tip is firm, the grip is curved, and there are switches on the side for added convenience. 
It feels like an actual pen you're working with and responds well to pressure on the pad! While I know it may be standard practice for pen tablets to be velocity sensitive in 2022, it still feels like a great feature.
The ergonomic rubber shape allows you to grip it firmly without causing discomfort to your wrist or fingers, even if you're using it for long periods. Plus, the pen doesn't require batteries! 
The ergonomic aspect of this was indeed a game-changer for me. I spend many hours a week audio editing and making minute adjustments on photos, automation lanes in my DAW while producing music, and more. Because I've always done this with a mouse, my forearms are not likely for me lately. But the switch in grip and the change in posture offered by the Tablet remedied these issues overnight.
Wacom Intuos Pro has a great battery life in comparison to its competition. It stays functioning for much longer than you would expect and means you can safely and comfortably bring this thing with you without flights and trips to get some work done while you're in transit.
Plus, as a bonus, It offers 10 hours of use and can be charged within a few hours with its USB-C type charging cable!
This is where this truly shines and can be a game-changing thing to add to any creative workflow. Most people only assume that Wacom tablets are for digital artists in photoshop or InDesign, but that couldn't be further from the case.
With more customization points and extreme cross-platform usage, Wacom tablets fit seamlessly into audio editing, music production, and other creative workflows. As a music producer, I have really loved drawing in my automating lines with the Wacom tablet.
Not only that, but the ergonomic side of things means that my wrists and forearms are much happier using this after a long session in the studio than it ever was using a standard mouse!
Tablet:
Active Area 8.82 x 5.83" / 224 x 148 mm
Number of Buttons 8
Buttons Customizable Yes
Inputs/Outputs 1 x USB-C
Dimensions (W x H x D) 13.18 x 8.54 x 0.31" / 338 x 219 x 8 mm
Stylus:
Pressure Levels 8192
Tilt 60°
Number of Switches 2
Report Rate 200 PPS
Resolution 5080 lpi
Technology Electromagnetic Resonance (EMR)
Dimensions (L x D) 6.2 x 0.6" / 157.0 x 15.0 mm
General:
Wireless Connectivity Bluetooth
Bluetooth Protocol Bluetooth + LE
Bluetooth 4.2
Battery Type Lithium-Ion
Maximum Battery Life 12 Hours
Charging Time 4.5 Hours
Multi-Touch Yes
Weight 1.5 lb / 0.7 kg
Managing Editor at Magnetic Magazine – Former Marketing Manager at the Hyperbits Masterclass – Writer, Content Strategist, Music Producer, and Record Label Manager 

source

[Free For Profit ] Hip Hop Underground Instrumental | Lofi Type Boom Bap Beat | Base DE Rap

Djo's Joe Keery Knows the Universe Won't Decide for Him – FLOOD Magazine

Listen
Djo’s Joe Keery Knows the Universe Won’t Decide for Him
In our latest digital cover story, the Stranger Things star shares how his creative processes for songwriting and acting overlap, as well as how his second solo LP DECIDE was inspired by a need for change.
Words: Margaret Farrell
Photos: Pooneh Ghana
September 28, 2022
Photo by Michael Muller. Image design by Gene Bresler at Catch Light Digital. Cobver design by Jerome Curchod.
Phoebe Bridgers makeup: Jenna Nelson (using Smashbox Cosmetics)
Phoebe Bridgers hair: Lauren Palmer-Smith
MUNA hair/makeup: Caitlin Wronski 
With 232 pages and an expanded 12″ by 12″ format, our biggest print issue yet celebrates the people, places, music, and art of our hometown, including cover features on David Lynch, Nipsey Hussle, Syd, and Phoebe Bridgers’ Saddest Factory Records, plus Brian Wilson, Cuco, Ty Segall, Lord Huron, Remi Wolf, The Doors, the art of RISK, Taz, Estevan Oriol, Kii Arens, and Edward Colver, and so much more. 
The West Coast punks’ 1980 debut full-length stands as both an important historical document and a necessary, contemporary reflection of the world today.
The jazz fusionist plays to his strengths as a sample-based thinker and collage artist while also showing how he can wrestle his micro-moments into long-form works.
Folksy, harmonic, and earnest in a way that Reed’s often-salacious songs could never be, this archival leap into memory lane is charming, scattered, sketchy, and even funny at times.
Joe Keery wants to go back to a certain golden age of music. No phones or collabs over Zoom—just himself, studio musicians, and producers wizarding over a massive stripboard, confined to a studio for a few weeks with the challenge of throwing ideas to the wall and seeing what sticks. “It would be nice to see how a different environment affects the music you’re making,” he tells me over Zoom of his dream studio locale: Paris. He sits in front of a royal blue velvet couch as he envisions how he wants to challenge himself with making music in the future. 
He invokes a romanticized pressure cooker situation where one is forced to follow their creative intuition in a single studio for a short number of weeks. “Constraints are not necessarily bad,” he says. “Having some outside pressures can be good creatively, because you’re forced to make decisions.” A second passes before a soft smile begins to take shape across his face: A cheesy full-circle moment is about to take place, and he realizes this before the words fly out of my mouth. “You’re forced to decide,” I say, smirking at the namedrop of the album he’s promoting for this interview. “Deciiiiiide,” he says in a sing-songy voice before flailing his arms around in a circle. 
Calling in from Rome, I catch Keery right before he’s about to go back on set for a new movie he’s working on, acting alongside Willem Dafoe and Lily James. Keery is most known for his acting career, starring in Stranger Things as Steve Harrington and showing his range with comedies like 2021’s Free Guy and thriller-horror films like 2020’s Spree. Although acting has brought him stardom, dethroning Robert Pattinson as Hollywood’s new hair king isn’t his only creative pursuit. 
Before Joe Keery was a household name, he gained familiarity in the Chicago music scene playing in the meditative psych-rock group Post Animal. In 2019, it was officially revealed that Keery had parted ways with the band due to scheduling conflicts and the rise of his acting career. Later that year, he released his first single “Roddy” under the name Djo. His growing fame seems to have nurtured his creative output. That same year, he released his debut album Twenty Twenty. 
“The imagery of the eight-ball [on the album cover] is asking the universe, ‘What should I do?’ The universe’s answer is just, ‘Decide, dude. Decide.’”
Now, three years later, Djo returns with the sophomore follow-up DECIDE, which demonstrates an exciting progression from mystical psych-rock to punchy ’70s synth-rock. Inspired by Daft Punk’s Random Access Memories, Keery uses that robotic sound to explore existential dread and technological mundanity. “That’s a band that as a really young kid I found and thought, ‘This is insane,’” he says of the French duo, his eyes growing wide. “I didn’t really understand it because my context for bands was Bruce Springsteen and Led Zeppelin. It’s a band you can kind of keep going back to, and the older you get, you glean something different from their music.”
On Twenty Twenty standout “Chateau (Feel Alright),” Keery gets lost in a dreamy, uncertain certainty. “It’s a decision that I’m glad that I made / I’m still uncertain that it happened at all,” he sings alongside a noodling guitar. His voice has a slight echo, which emphasizes his mind’s instability. It’s easy to imagine Keery lost in his memories, adding and subtracting details in a calm daze. Later, on “Mortal Projections,” Keery eerily declares: “I’ve seen reflections of my mortal self projected on the wall.” It wouldn’t have been necessarily accurate to say that nostalgia, the passage of time, and indecision have been themes throughout Keery’s music, but DECIDE makes clear that these concepts are routinely bumbling around his head. At times, Twenty Twenty crept along with an unsettling inconclusiveness; on DECIDE, Keery pushes forward with urgency and resolve. 
“I’m an indecisive person,” he says. “A lot of change is based around making decisions. That’s a quality that I appreciate in other people and wish that I could [have].” He looks off to the side and smiles before referring to his album’s cover. “The imagery of the eight-ball is asking the universe, ‘What should I do?’ The universe’s answer is just, ‘Decide, dude. Decide,’” he laughs. “You can take out the ‘dude,’ though. I don’t think it’s ‘Decide, dude.’” But who’s to say what the universe sounds like. Maybe, it can take the form of some hippie surfer bro ushering us toward solutions. 
It’s this combination of lightness and existentialism that makes DECIDE worth its runtime. Whether it’s recognizing a shitty friendship, confronting new adulthood, or ignoring the cringey urge to stalk yourself on the internet, Keery doesn’t take himself too seriously, yet doesn’t hold back personal faults and fears. On “Gloom” he sounds like he’s imploding a bit. He bashes someone’s mom and girlfriend, then later frets about not being able to walk his dog. And it’s funny—it’s often hard to tell if Keery is battling a frenemy or himself: “Your insults don’t affect me with my favorite coat on / I know my hair looked good in the bathroom at the bar / Turns out I left my wallet at the bathroom bar,” he sings over a lovechild beat of Devo and Gary Numan.
Keery reveals his innate ability for comedy no matter what he’s making. “It’s difficult to not do it, to be honest with you,” he says while discussing the humor in “Gloom.” “It’s difficult sometimes not to have humor in songs. That was a song that poured right out. I guess it’s a part of my personality. Life is crazy, and a lot of the time things don’t make sense.” Comedy is part of his art, but not something he wants to make the central point. “For a long time, I was like, ‘I don’t want to make a comedy album.’ So maybe I shied away. But this last time I felt more comfortable in letting what will be, be. The second you censor yourself you start to subtract the thing that makes it unique to you.”
He looks to icons like John Lennon and Paul McCartney when staying true to himself throughout the writing process. “The majority of the time, I’m not like, ‘Ooh, these are nice lyrics,’ then applying those to the song. Something I love about Lennon is that a lot of his lyrics seem very stream of consciousness. It poured out of him in a way, but it means something as well. I’m not the type of guy who’s writing a lyric like a poem then applying it to music that’s already been written. A lot of it’s based around being inspired by the music, listening to it, and laying something on top of that.” 
“I felt more comfortable in letting what will be, be. The second you censor yourself you start to subtract the thing that makes it unique to you.”
The humor in Keery’s songs acts mostly to cope or find relief from life’s stresses. “I was mostly trying to be open and true to myself when writing the music. At the end of the process, you kind of have to find the throughline as to what the songs are about.” At 30 years old, that throughline is presented as Keery making sense of his late twenties. “I think universally, it feels you’re at the crest of this wave facing this big sort of abyss before you. You start to question what you really want out of your life, I guess. What is important to you? What do you value? [This album] is the only place where I can talk about those sorts of things creatively. From 25 to 30, I’ve seen the most change with myself. I’m inspired by it and also terrified by it.” 
He details what terrifies him most about these changes: “Things not being the way they were. Saying goodbye to things is difficult. Saying goodbye to chapters of your life that you’ll never get to revisit is a sad realization, but a part of life. Not wanting to say goodbyes is a big theme in the record.”
DECIDE came together with the help of what Keery calls a “supergroup of friends” which included Adam Thein, who also worked on Twenty Twenty. The two met as a result of Keery fawning over Thein’s old group Dolores. Keery reached out to Thein after he’d moved to Oregon and the two have gone from collaborators to close friends. Other collaborators include his friend Sam Jordan, who Keery grew up playing with, Slow Pulp drummer Teddy Matthews, and Kainalu’s Trent Prall. His face brightens describing what made him hunger for a small hint of those golden days—four dudes in a room, jamming. “Get Back was coming out as we were recording. We’d get up in the morning, we’d make coffee, watch some of the documentary, and then we’d probably go in around noon and stay ’til midnight, and then come home and talk about what we did and do that for 10 days. It was incredible.”
One of DECIDE’s strongest tracks was born from that period, which comes the closest to what Keery idealizes as the “old way of making music.” It also, ironically, showcases Keery waving goodbye to the past. “And when I’m back in Chicago I feel it / Another version of me, I was in it,” goes the melancholic synth ballad “End of Beginning.” Here, Keery looks back on a younger version of himself in the city he came of age in. He captures the phantom-limb sensation that comes back when you revisit a former home; memories of yourself begin to feel bittersweet, and that past version almost becomes a familiar stranger with a blurred face. “That [song] felt like an introduction to a new way of being creative and making music that I kind of want to continue to pursue.” 
“Saying goodbye to chapters of your life that you’ll never get to revisit is a sad realization, but a part of life. Not wanting to say goodbyes is a big theme in the record.”
As a self-proclaimed indecisive, Keery reveals his go-to strategy for battling uncertainty. “My favorite part of the process is being like, ‘Let’s do the opposite of what we think is right in this situation, see if it works. Maybe it won’t, but at least we tried it.’ And so I’d say more often than not some really exciting things come out of that.” He uses this open-ended strategy for his acting as well. There’s recognition that decisiveness isn’t necessarily a perfect trait. In some ways it might lead to stubbornness. “When I started this [album], I had a bunch of different ideas about what I thought it would be, or what it would turn into. It’s completely different. So I think you can plan and you can plan, but at the end of the day, the music is going to be kind of what it is.” He adds that it’s best “being open to change, and realizing that if you try something, it doesn’t mean you’re stuck doing it that way.”
What Keery is getting at, both on his new album and in our conversation, is that revisiting any idealized golden age has its merits—but taking the risks that come up along the way and seeing where you end up may be the only way forward. FL
Listen to flood fm

source

End of the line for Geneva's co-working space, Port 100 – Finger Lakes Times

Mostly cloudy early, then sunshine for the afternoon. High 58F. Winds N at 5 to 10 mph..
Clear skies. Low 37F. Winds light and variable.
Updated: September 29, 2022 @ 8:08 am
Maureen Ballatori is co-owner of Port 100, a Geneva co-working space on Castle Street that will close at the end of 2022 — six years after it opened.
Courtney Carroway of 29 Design Studio works at Port 100, which is closing its doors at the end of the year.

Maureen Ballatori is co-owner of Port 100, a Geneva co-working space on Castle Street that will close at the end of 2022 — six years after it opened.
Courtney Carroway of 29 Design Studio works at Port 100, which is closing its doors at the end of the year.
GENEVA — An innovative co-working space launched by the city six years ago to encourage entrepreneurship is closing its doors at the end of the year.
According to co-owner Maureen Ballatori, Port 100 was home over the course of its existence to nearly 100 members and 50 businesses at 100 Castle St., space that was renovated by building owner Dave Linger with city assistance.
“I think the pandemic had a big effect on that space,” Ballatori said Tuesday. “We were on a great trajectory (prior to Covid-19).”
Port 100’s second co-working space on East Avenue in downtown Rochester will remain open. Ballatori said that space recovered quickly when the pandemic eased.
Ballatori owns Port 100 with Craig Webster, whose company, Webster Management, also manages the Geneva Enterprise Development Center. He will assume full ownership in January, she said.
Port 100 features work spaces for up to 12 permanent full-time members and other options as well. The site provides all the workings of a business office.
Ballatori has a special place in her heart for Port 100. Her company, 29 Design Studio Branding and Marketing, evolved from a one-person operation to eight employees. Her business will move over to an adjacent spot in the building, called the Nathaniel Block.
“It’s been such an awesome space for us,” she said.
It was Ballatori, with help from the Ontario County Industrial Development Agency, who spearheaded the effort to save the facility after City Council ending funding for the co-working space as part of the 2020 budget. The IDA provided $30,000 over three years to make up for the loss of city funding.
“We were fortunate to have the county step in,” she said. “With that funding (from the IDA), we had broken even and would have needed that level of funding to continue.”
Ballatori noted that the agency was open to renewing the support for another three years. However, the responsibilities of managing her growing business and family concerns — she is the mother of two younger children — also factored into her decision to close Port 100.
Ballatori said she is proud of what Port 100 has accomplished, noting that a number of businesses and non-profits were members over the six-year run. The space currently has 16 members.
“I didn’t see this as a failure,” she emphasized. “The space ran its course, but I think shared spaces are here to stay. Look at Monaco’s at 10 a.m. on a Tuesday. It’s full.”
Monaco’s Coffee is a bustling establishment on Washington Street that draws a number of people with laptops in hand.
Linger looks at Port 100 as a success as well. He noted that former city manager Matt Horn and Sage Gerling, then director of neighborhood initiatives, were searching for space for a co-working site and chose his building.
“This building was a dilapidated mess,” he said. “They looked past the mess.”
The building was not only renovated to provide space for Port 100 and a retail/office space, it also features 14 apartments with 100 percent occupancy, he noted.
Linger believes the renovation has helped encourage development in a part of Castle that had been somewhat of an afterthought.
“It’s been an ongoing process, but Castle has come a long way,” he said.
Ballatori expressed thanks to Linger, who helped Port 100 deal with a downturn in tenants during the pandemic.
“Co-working spaces are not covid-friendly,” Linger observed. “They (Port 100) were great tenants. I have nothing but positive things to say. It’s just been a tough couple of years for the business.”

The Finger Lakes Times mobile app brings you the latest local breaking news, updates, and more. Read the Finger Lakes Times on your mobile device just as it appears in print.


Success! An email has been sent to with a link to confirm list signup.
Error! There was an error processing your request.
Our daily headlines delivered to your inbox each morning for your reading pleasure.
Receive news and emergency updates as soon as the stories unfold.
Get the latest obituaries from the Finger Lakes Times.
Get the latest local and national news.
Get our expert short-term forecast, summary of the weather details and news of any severe weather.

source

Antares Auto-Tune vs Waves Tune: Which vocal tuner is best? – MusicRadar

MusicRadar is supported by its audience. When you purchase through links on our site, we may earn an affiliate commission. Here’s why you can trust us.
Two of the biggest vocal tuners go head to head as we put Antares Auto-Tune up against Waves Tune to see which is the right one to apply to your vocals
It’s the big Antares Auto-Tune vs Waves Tune head-to-head as we line up two of the biggest names in vocal processing. The business of vocal tuning and pitch correction plugins is huge, for two reasons. There’s the obvious need to correct a singer’s vocal issues as, of course, we don’t all boast the best voices. Then there’s the ongoing popularity of the synthetic effect kick-started by Antares. This artificial vocal effect is still one of the most well-used production techniques today, and if you want to create it with your own vocals or simply keep your singing better in tune, then there is a lot of software to choose from. We’re lining up two of the most popular vocal tuners from two of the industry’s biggest hitters to see which is the right one for your needs.
Waves Tune (opens in new tab) and Antares Auto-Tune EFX+ (opens in new tab) both sit at similar and very popular price points at just over $200 and will each perform a variety of vocal tuning feats. Antares’ Auto-Tune effect was made famous by Cher with the track Believe in 1997. It’s an effect that you still hear across many genres and many other vocal tuners try to emulate it. However, as the original Auto-Tune creators, you can take it as a given that the company has included the ability to create such vocal effects in EFX+. 
Waves Tune can also create the effect just as quickly. Both titles can also be used for more human and subtle tuning, so if you are not a fan of the popular effect, there will still be plenty on offer for you and your vocal tuning with both plugins. 
However there are also big differences between both of the plugins we have lined up, so let’s see which will suit your tuning needs across a variety of subjects including features, design, sound quality and ease of use.Antares Auto-TuneLet’s get started with that most popular of contemporary vocal effects: the synthetic vocal. Both Waves Tune and Antares Auto-Tune EFX+ feature the ability to create this famous effect – and very quickly, as we find out below. Beyond this popular effect though, the plugins differ quite widely in their aspirations.
Waves Tune is more about seeing the notes on screen and making major or minor adjustments. You can get the software to do this for you according to various settings (song pitch, formant, vibrato and so on), or you get the opportunity to go in and make the edits yourself, even note by note if you wish. This not only allows you to make pitch changes on individual phrases, for example, but to keep the human feel of the original recording. 
Antares Auto-Tune EFX+ doesn’t give you these features in such a visual way, nor is it about this kind of detail. However it does offer banks of other effects on top of that Auto-Tune effect and you can keep the humanity in there by switching the Auto-Tune option off or dialling back the Retune Speed. 
It’s the sheer number of other effects that are the standout feature of EFX+ and these tip the ‘Features’ balance in its favour. As you load in one of its many presets you’ll discover various effects (shown in a block of four) that combine to produce dramatic pitch, filter, amp, vocoder and mutating vocal effects. None of them are human in a Waves Tune way, but they are all exciting, although some might not be that useful in some mix situations. To top it off you get an X-Y pad to control parameters and an Auto-Motion pattern generator to give you extra melodic movement in an instant.
Both plugins can produce the synthetic vocal effect we all know and love. Waves Tune adds a more human element by way of its detailed editing, but Auto-Tune EFX+ gives you a Humanize dial and while you don’t get the detail, you get loads of added extra effects.Antares Auto-TuneWaves Tune and Antares Auto-Tune EFX+ certainly feature very different interface designs. Waves Tune is perhaps starting to show its age as it first appeared in 2006. Next to the sleeker, colourful and more modern interface of Auto-Tune EFX+, it is a very different proposition, dominated by a central window that shows the vocal (or other audio) being processed. It appears within the window as notes across the keyboard (top to bottom). Editing is easy and you can zoom in on notes for microtuning and note shifting. A number of other dials allow easy editing of the Note Transition and Speed, and these determine the ‘robotic-ness’ of the effect which can be increased if they are at a minimum. 
Auto-Tune EFX+’s UI is more space age, imparting the excitement of the various effects you can apply to your vocals which are shown at the bottom. As we have seen in the Features section, Auto-Tune EFX+ is now not just about tuning but wilder effects. That said, tuning still plays a huge part in just about everything it does so its screen is dominated by a keyboard showing the notes played and also a large central dial indicating notes, plus the other large Retune Speed and Humanize controls that help get that all important synthetic tuning effect. 
We’re starting to see that while these are tuning plugins, they both have different target audiences so it’s hard to say whether one looks better, but we will try! And only because Waves Tune could probably do with a refresh, it’s EFX’s more modern finish for us.Waves TuneWith Waves Tune, you set it up with the key of your song and the central display will show (in red) notes not allowed in that scale, so you already know visually which notes are allowed. Playing your recorded audio through the plugin will show you in orange the notes sung, while a green line is the suggested tuning position. Next time you play it, the pitch correction will take effect according to the green line. 
For more detailed actions you can click and drag notes up and down by semitones or zoom in on the corrected lines and edit them to make them sharper or flatter. You can add subtle vibrato in the bottom right section and the three knobs left of this help you get that more synthetic effect. The Speed dial determines how quick the tuning effect is applied; the faster you go the more artificial the result. Note Transition is similar and how quickly you’ll move from one note to the next, with the same lower setting introducing less humanity. Ratio acts a little like a mix control, determining how much the previous parameters come into play. When you make your vocals more robotic you’ll see the tuning flatten and the note transitions become square as the tuning becomes more artificial and, hey presto, your vocal is synthetic!
With Auto-Tune EFX+ the process is quite different but just as easy, depending on what you want to do. Playing the audio through the plugin and it immediately takes effect, so it’s more ‘live’ than Waves Tune which needs to process the audio once first. Then you set your song key (as with Waves Tune, use a plugin like Hornet SongKey if you don’t know it), and set your Formant and Auto-Tune controls. The former allows you to pitch up and down your vocals without inherent chipmunk effects. Select the Auto-Tune button, raise the Retune Speed dial (similar to the Waves Speed dial but you are turning it the other way to make the speed quicker) and you have instant synthetic vocals.
The lower half of Auto-Tune EFX+ is more about the extra effects you get with the plugin – see Feature above. These are simple to dial up and edit (using a central modular section) and a neat X-Y pad lets you slide between parameters in a graphical way. 
It’s easy to get the famous synthetic vocal effect with both plugins. But when it comes to detailed vocal editing Waves Tune makes it clearer to see what is going on and make precision edits. However, Auto-Tune’s EFX+ lets you get to its many effects quicker.Waves TuneAt first glance Waves Tune and Antares Auto-Tune EFX+ both look very different but on one level they will actually deliver similar sound qualities: they both do vocal tuning corrections and the famous artificial tuning effect. As we have dug deeper in this head-to-head, though, we have found other sonic differences. 
Waves Tune is more about refined editing and natural results. Add a hint of vibrato here, some subtle tuning there for a natural-sounding vocal take where it’s not obvious that any editing has even been done. You can go unnatural very easily too, with a three-point click and turn routine that takes around 10 seconds! However, it’s one effect or the other, with only some formant and vibrato extras to explore beyond these. With Antares EFX+, things get a little crazier…
The Auto-Tune sounds is a little more instant and pronounced with Auto-Tune EFX+. That’s not to say Waves Tune lacks anything, but it’s very easy to take this synthetic sound into more dramatic territories with EFX+. You then combine it with a full-on multi-effects engine, with six different modules and your vocal – or any other audio for that matter – will be pitched, crunched, filtered, saturated and distorted. And best of all you can glide parameters up and down with an X-Y Pad for great movement and diversity. 
So it sounds like Antares wins out in the sound quality stakes but that depends on what you want. Wild and crazy? Yes EFX+ wins. Natural human and detailed? Waves Tune does it. Truth is we’d gladly have both plugins lined up on our vocal tracks, such is their sound and usefulness across both scenarios.
While both of these plugins both fall into the same price range and they are also clearly tuning plugins, our head to head has revealed different uses and potential customers. We’ll start with the popular over processed vocal tuning effect and both will happily get as robotic or as synthetic as you like – and very quickly indeed. Beyond this though, as we have seen, they start to veer off in different directions.
Waves Tune (opens in new tab) certainly has the ability to dehumanize your vocal – in the popular and pleasing way – but it also has fine tuning and detailed, zoomed in note editing at its heart. You could spend an age tweaking a long vocal line to not only put it completely in tune but also retain all of its humanity. And you wouldn’t hear a note out of place or any edit. No-one would know a thing and your – or your singer’s – blushes will have been spared!
Auto-Tune EFX+ (opens in new tab) can also do the robotic effect but can stretch it in all sorts of directions, not to mention layering other effects on top of it. The clue is in the name EFX+: this is Auto-Tune on steroids. So that gives us two very distinct pieces of software which would suit two very different producers. Those after perfect vocals and who like getting into the detail will love Waves Tune. Those after instant gratification and out-there vocal effects will prefer Auto-Tune EFX+. 
It’s therefore an easy call for you to make. Are you in one camp or the other? Simply choose your own winner! For us though, picking one overall is tough as they excel at very different things. Do we want the crazy and flexible sounds of EFX+ or the solid performing and more natural sound of Waves Tune? We’re leaning more towards flexibility versus humanity and would probably opt for Auto-Tune EFX+, although the truth is you could easily plug both of these side by side into your effects chain and get the best of two very different worlds. And with regular offers for both (at the time of writing Waves Tune is 86% off, for example!) then you can probably afford to do just that. 
Andy has been writing about music production and technology for 30 years having started out on Music Technology magazine back in 1992. He has edited Future Music, Keyboard Review, MusicTech magazines and currently runs Computer Music which he helped launch back in 1998. He owns way too many synthesizers.
Don’t miss the latest deals, news, reviews, features and tutorials
Thank you for signing up to Musicradar. You will receive a verification email shortly.
There was a problem. Please refresh the page and try again.
MusicRadar is part of Future plc, an international media group and leading digital publisher. Visit our corporate site (opens in new tab).
© Future Publishing Limited Quay House, The Ambury, Bath BA1 1UA. All rights reserved. England and Wales company registration number 2008885.

source

‹ Previous Next ›