Founded in 2014 by former Noitamina producer Koji Yamamoto, TWIN ENGINE has had a hand in some notable titles including Kabaneri of the Iron Fortress, the 2019 version of Dororo, Penguin Highway, and the upcoming Hell’s Paradise: Jigokuraku adaptation. The company, as Yamamoto himself described to us, is a planning and holding company with various studios under their umbrella, with Penguin Highway and A Whisker Away’s Studio Colorido being one of their main studios. We had the opportunity to speak with Yamamoto, TWIN ENGINE producer Naokado Fujiyama, and A Whisker Away co-director Tomotaka Shibayama about TWIN ENGINE’s current projects, including the second season of VINLAND SAGA, as well as developments like Colorido’s partnership with Netflix.
Studio Colorido entered a multi-year partnership with Netflix and Drifting Home is coming out later this year. Could you talk about the partnership and what we could see in the upcoming future?
Yamamoto: On Netflix, we see a lot of content, like anime adaptations based on manga. We do a lot of that here at TWIN ENGINE. For Studio Colorido, we have a lot of different writers and artists that have joined our team and wanted to make original series.
But the caveat for originals is that there’s a lot of risks involved and so we require a long-term plan to succeed. By partnering with Netflix and having a long-term plan, I thought this was a very good way to sort of get ourselves out there.
Original anime projects can be challenging and require a lot of creative involvement. How do you come up with different ideas for each anime film?
Yamamoto: The common theme we have with these anime is focused on fantasy worlds that come from ordinary daily worlds. With A Whisker Away and Drifting Home, you’re jumping into this fantasy world that’s coming from the real world. That’s the central main theme we’re going for with these series.
Many overseas fans are not aware of TWIN ENGINE. Could you share a little bit about the production company and your day to day obligations?
Yamamoto: Basically, TWIN ENGINE is a planning and holding company. We invest money, sell content, and make advertisements. We have different studios under TWIN ENGINE and Studio Colorido is one of the main studios to produce and make anime and content.
Tomotaka Shibayama: The unique part of Studio Colorido is that production companies typically don’t have a lot of interactions with the advertising and publishing companies. We’re actually in very close contact with TWIN ENGINE all the time. That gives us a sort of this unique strength to collaborate and make good anime and products.
You have a new studio called Kafka that was recently founded and is taking over production for the series The Ancient Magus Bride. How did the project and decision become a reality? Could you talk a little bit about the studio?
Yamamoto: With Studio Kafka, we were focused on getting The Ancient Magus Bride. Some people from WIT STUDIO became independent and joined the project management and production of the Studio Kafka. The people involved became independent and were already working on The Ancient Magus Bride. From the very beginning, the studio was formed and we were set out to work on this project.
Now that Kafka has worked on The Ancient Magus Bride, what direction will the studio take in terms of upcoming projects, artistic ways, and other aspects?
Naokado Fujiyama: We worked on three OAD episodes for The Ancient Magus Bride and have one unannounced project we’re working on right now. In terms of the direction, we focused on making every cut and scene very refined and published.
We want not just flashy action and scenes, but we want the audience to see each and every cut and appreciate all the details and everything that went into making the screen and the structure of it. We believe that is an excellent way to make the entire series bloom into something extraordinary. That’s the direction we’re taking with the studio.
VINLAND SAGA Season 2 has been announced with many of its key staff returning at a different studio. It’s very rare to see that and the first season was a huge success overseas at the Anime Trending Awards. Could you talk about how VINLAND SAGA Season 2 came to fruition and what we could expect from the upcoming sequel?
Fujiyama: We chose to switch studios from WIT Studio to MAPPA this time. I think that’s where a lot of people were surprised.
But by switching the studio to MAPPA, new and wonderful staff members have joined the team, and they are working together with the staff from season 1 to create season 2. We are working hard to produce season 2 that will be enjoyable for everyone, so please look forward to it.
Thank you for the insight. Overseas, there is a tendency to be fixated on what studio is credited as the animation production for an anime series. When it was also announced VINLAND SAGA’s core creative team was returning at a different studio, it was a pleasant surprise.
Fujiyama: When we released the trailer for season 2, we released it in a way to show continuity from season 1, and I hope that is something fans would appreciate and a positive aspect. We’re very excited to bring Vinland Saga Season 2.
What did the production structure look like for VINLAND SAGA Season 2?
Fujiyama: TWIN ENGINE basically provided capital, but we also have the editor in chief of the original story and producer from Kodansha and anime producers from MAPPA who transferred from WIT Studio. The new member structure is formed to deliver the best season 2 to the fans.
Any final comments to final as we look forward to what’s to come from TWIN ENGINE?
Fujiyama: As we said, season 2 of VINLAND SAGA is coming in January 2023. We’re hoping we can make something every greater than season 1. We’re very excited about that. For The Ancient Magus Bride, the OAD episodes are now available for our international fans. Please check it out.
Yamamoto: In case anyone is confused, TWIN ENGINE is a holding and planning company and we have various studios, including Studio Colorido and Studio Kafka. Please look forward to the great work coming from those studios.
Interview: TWIN ENGINE Discusses Vinland Saga Season 2, The Ancient Magus Bride, and Studio Colorido – Anime Trending News
'OktoberTheaterFest' AT SHORTS & BRIEFS 8 – Broadway World
Get local news, offers & more…
Manila, Philippines–For the eighth time, Eksena PH, a community of artists and creators, is back with “Shorts & Briefs,” an independently-produced theater festival that features 10-12 minute plays.
The performances will run at the Draper Startup House along Burgos Street, in Poblacion, Makati City, on all Sundays from October 9 to 30, 2022, with 2 p.m. and 7 p.m. showtimes.
In this edition of “Shorts & Briefs,” eight stories for kids, originally published as children’s books, will be adapted into short plays.
“Virgin Labfest” alum Karl Alexis Jingco is the festival’s founder and director whose works revolve around improv and inclusive theater.
The eight plays are as follows:
“Lulu” by BJ Crisostomo, directed by Richardson Yadao, a choreographer at the Alice Reyes Dance Philippines
“Si Tay Nay,” by Sofia Santiago, directed by EC, a storyteller, and an LGBTQ+ advocate
“Signal No. 3” by Dr. Luis Gatmaitan, directed by ER Alviz, a filmmaker whose background is music production and advertising
“Ang Kuya Kong Zombie,” also by Dr. Luis Gatmaitan, directed by Maco Barredo, a former thespian
“Palayain and Aking Inay” by China de Vera, directed and rewritten as “Pagusapan Natin si Amanda” by Dustin Celestino, an experienced playwright whose previous works were staged at Virgin Labfest, Cultural Center of the Philippines
“Si Aries at si Philip” by Juan Ekis, directed by Ryan Termoso, a young church-based filmmaker from Laguna
“The Missing Blanket” by Cheeno Sayuno, directed by Kath Nobleza, a Baguio City-based artist-teacher, featuring Ms. Nobleza’s trained actors
“Maria Sibol” by Mark Boquiren, directed by Jazziekha Alviz, a young mother, filmmaker, and student at the MINT College
The festival’s production team comprises Kevin Matsuyama, graphic designer; Steph Estrella, production manager; Felix Tiongson, head stage manager; Rozen Tabaodaja, tickets manager; Nino Manzano, and Jun Ebdane.
WE WILL ROCK YOU World Tour Cast Announced
I WILL: THE MUSICAL Has its Premiere at Manila Metropolitan Theater Next Month
Watch for a Postmodern Take on CAROUSEL, Starring Gian Magdangal, Karylle Tatlonghari
TP’s ANAK DATU Opens CCP’s New Black Box Theatre
Oliver is a seasoned public relations and digital marketing professional who works with CEOs and young professionals to hone their creativity, stakeholders’ engagement strategies, and writing a… (read more about this author)
Most Popular
‘OktoberTheaterFest’ AT SHORTS & BRIEFS 8
I WILL: THE MUSICAL Has its Premiere at Manila Metropolitan Theater Next Month
WE WILL ROCK YOU World Tour Cast Announced
BroadwayWorld TV
News + special offers for Broadway Shows
Philippines SHOWS
Recommended for You
Sign-Up for Philippines News
Follow Us
BWW Sister Sites
Apps
Michigan Rockers Jeremy Porter & the Tucos To Play Happy Dog on October 13 – Cleveland Scene
By Jeff Niesel on Tue, Sep 27, 2022 at 4:37 pm
Here Are All the Filthy Rich Clevelanders Going to Dee and Jimmy Haslam’s House to Donate $25,000 to J.D. Vance
By Sam Allard
Browns’ Myles Garrett Drove His 2021 Porsche Off Route 18 and it Flipped Over Multiple Times
By Sam Allard
Subscribe now to get the latest news delivered right to your inbox.
Cleveland’s Minus the Alien to Release New EP in November
By Jeff Niesel
Band of the Week: Blue Hour
By Jeff Niesel
Cleveland’s Brian Lisik & Hard Legs To Release Live Album Recorded at the Rialto
By Jeff Niesel
Cleveland Indie Rockers Spirit Oh Spirit Release Latest Single
By Jeff Niesel
Cleveland’s Minus the Alien to Release New EP in November
By Jeff Niesel
Band of the Week: Blue Hour
By Jeff Niesel
Cleveland Indie Rockers Spirit Oh Spirit Release Latest Single
By Jeff Niesel
Cleveland’s Angie Haze To Release New Album in October
By Jeff Niesel
View more issues
Read our sister publications
737 Bolivar Road
Cleveland, OH 44115
A real production – New York Social Diary
Tuesday, September 27, 2022. A beautiful day yesterday in New York, first day of the week, warm at 70 degrees but more like autumn, with the temps dropping to the high 50s. It’s not exactly cold but, between air conditioning and the very warm days of summer, it’s a reminder. Autumn is the messenger; winter is a-cumin’ in .
When I lived in Los Angeles I was surprised and pleased to notice the changes of seasons. They were subtler in the sense that you had to pay attention more closely to Nature’s transitions. But the air was cooler, generally; and of course it got darker earlier. But otherwise it was mainly sunny days like the other seasons.
Autumn in New York really got started last week beginning with the annual United Nations meeting bringing many leaders from countries all over the world for several days of meeting, etc. It’s a nuisance to New Yorkers because the city can only work optimally when all the roads are open. It is a city on the move.
Each year the President, like other world leaders, speaks to the gathering of nations. Now when the President comes to town, at least under these highly publicized events, they close off streets and avenues for blocks and blocks. Its effect is another aspect of the anxiety that these times portray. And so it is.
That night, last Wednesday was the final and most annoying to the populace (for a lot of sensible reasons). It was also the night that Quest Magazine had its annual Quest 400 cocktail party. At Doubles. I was a co-host and “had” to be there. It was called for six but it was slow in gathering because of the scene outside.
Nevertheless people gathered in good numbers eventually and at 7:30, I left the party at 59th and Fifth to go to the Winter Garden Theater on 54th and Broadway. Because of all the blocked roadways including the blocked sidewalks around the Plaza Hotel, I decided to walk. The length is in the crosstown blocks but it’s not a great distance. The sidewalks, however, were crowded also, going and coming.
I’d never seen “The Music Man” before — film or theatre. I knew the score, grew up on it. Wonderful songs, big hits after the original Broadway show was launched. I rarely get to the theatre but Beth DeWoody who is in town invited me. I knew whatever it would be, it would be wonderful because of the score and the time when it had a long run on Broadway and film. And the score is classic Broadway Americana. It doesn’t make you feel bad. In fact, it can even make you feel better, even wonderful.
I ran into Deborah Norville at the Quest party, and when I told her I was off to see the show, she immediately told me how much she loved it. She first saw it when she was a little girl of 7, and she loved it then. And then again the film. I told Beth that story when I got to the theater. She too had seen it first when she was a 4 year old, and she too has seen in many times over the years on film.
And so it was, sort of to my surprise. I’d never seen the stage or film version, so I was unfamiliar with the story and was not aware that it had such a profound effect. A small town in the middle of middle of America — Iowa — in the late 19th/early 20th century.
The stars were Hugh Jackman and Sutton Foster and they were wonderful but so was everyone in this enormous cast. They were all stars before your eyes. Everyone from the oldest to the youngest which included some amazing very young performers and performances. There’s a social message but it’s a carnival musical set in middle America in a time now gone by. And therefore myth, but attached to truth and a great pleasure to witness from my seat in this great old theater.
(Barbra Streisand opened and became a huge star almost overnight in “Funny Girl” in this theater. I can’t resist recalling seeing La Streisand in the show on the second night and it was stunning; she was.)
The Music Man. Everything about this show is a celebration because of the performances — all of them — are brilliant. There were also several people of color among the performers, and it was beautifully integrated in all the roles; all brilliant and wonderful to watch. Amazing talent.
Then of course there was Mr. Jackman. I had never seen him perform in anything — which tells you a little bit about my knowledge of films or television — although we did meet back in 2004. A number of years ago, Susan Silver wrote a piece for the NYSD on her attraction to Hugh Jackman. He was a new star then and highly thought of. But Susan did a kind of essay. Here is a paragraph:
“There we were on a Wednesday afternoon. And it’s just started to drizzle. But we don’t care. Hundreds of females of all ages, some wearing mini skirts, some on walkers are giggling anxiously outside the stage door of a Broadway theater. (On the age scale I am somewhere in between the minis and the appliances.) We are waiting, not for Godot, but for Hugh.
We’re going to re-publish Susan’s piece because it’s very funny and it’s a wonderful portrait of a very talented actor/performer. He dances too. That’s probably well known but he does it so incidentally and so easily you’re amazed by his talent. His dancing reminded me of Fred Astaire. I don’t compare their dancing talents but Fred’s dancing was brilliant but matter-of-factly. Jackman has that quality as a performer.
That Wednesday night when I saw it, the theater was sold out. There were a number of young children in the audience – whole families attending and everyone loved it. I was moved by every aspect of the performance including the audience’s response. And the dancers and the chorus gave us more, in thanks.
First LMC Choral Concert 'Wine & Roses' October 15 – Moody on the Market
The Lake Michigan College Visual & Performing Arts Department presents its opening choral concert, Wine and Roses, at 2 p.m., Saturday, Oct. 15, in the Hanson Theatre of Lake Michigan College’s Mendel Center on the Benton Harbor Campus.
The event will feature the sounds of LMC Soundwaves and wine tastings from the College’s campus winery, Lake Michigan Vintners, all in a casual atmosphere. Each collection of rose-themed songs will be paired with a red or white wine tasting. Campus winemaker Timothy Godfrey will explain the winemaking process and “notes” of flavor for each wine.
LMC Soundwaves is under the direction of Rebecca Derbas-Selvidge. This dynamic student ensemble performs frequently in concert each semester. The selections performed are drawn from the standard choral repertoire and include madrigals, motets, folk songs, spirituals, and jazz. Ensemble membership is comprised of LMC students by audition.
Admission is free. For more information, visit lakemichigancollege.edu/arts, email [email protected], or call 269-927-8876.
About the Director
Rebecca Derbas-Selvidge, soprano, holds a Bachelor of Music in Choral Education from Western Michigan University, a Master of Arts from the University of South Florida, and a Certificate of Musical Theatre Performance from the American Musical and Dramatic Academy in New York City. She is a Music Lecturer at Lake Michigan College.
She has performed with various ensembles including Lake Effect Jazz Big Band under Steven Reed, Gold Company under Dr. Steve Zegree, WMU Chorale under Dr. James Bass, and VOICES LMC, as well as regional and local theatre productions such as Sandy in “Grease!,” Mother in SMSO’s “Ragtime,” and Penelope Pennywise in “Urinetown.” She has been the musical director for Twin City Player’s “Sound of Music,” Children’s Music Workshop’s production of “Hairspray,” and CMW TeenStock’s summer musical productions including “Les Misérables” and “Spamalot;” and directed “Xanadu.”
Derbas-Selvidge has performed at the International Association of Jazz Educators conference in Toronto and has appeared on several albums including WMU Gold Company’s “Who Could Ask for Anything More” and “30,” Tim Hauser’s “Love Stories,” and “Ditties for Kiddies,” a benefit CD for Little Kids Rock. She was writer/producer/performer for “A Woman’s World Cabaret” at Danny’s Skylight in New York City and has performed at such venues as The Cutting Room, The Triad, and Studio One in New York City. Derbas-Selvidge was co-singer/songwriter for the band Stoney End, a backup singer for Erin Hill Band, and a founding member of the Three Divas of Southwest Michigan with Carrie VanDenburgh and Katherine Rohwer.
Derbas-Selvidge is a proud alum of the Lake Michigan College music department where she received the Steven Sizer Vocal scholarship, received the Outstanding Musician of the Year award, and met her husband, Alan. She is mom to their son, Jack, and their family dog, Ginger.
About the Lake Michigan College Visual & Performing Arts Department
The Visual & Performing Arts department allows students to reach new levels of excellence through classroom instruction and public performance. The program is based in The Mendel Center, the only performing arts center of its kind in southwest Michigan. Here, LMC students have the opportunity to study theatre, instrumental and vocal music, dance, drawing, painting, and more in a venue that attracts more than 100,000 patrons annually.
Study on the inherent magnetism and its relationship with mechanical properties of structural round steel | Scientific Reports – Nature.com
Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 16078 (2022)
Metrics details
Inherent magnetism is an important properties of ferromagnetic materials. In this study, the internal magnetic field intensity (IMFI) and internal magneto-mechanical effect (IMME) of Q390B in a structural field were investigated to detect and verify the inherent magnetism in structural settings. In the IMFI test, the magnetic flux was used to detect the change in magnetic field to verify the existence of magnetism. In the IMME test, a novel instrument was implemented to measure the magnetic variation in the Q390B specimen without magnetic flux. Based on the low frequency cyclic (LFC) tensile loading tests, the inherent magnetism was fully described. Experimental results indicate that IMME shows great potential and more efficiency in inherent magnetism studies and can be promoted in the near future.
The magnetism properties of materials are widely used in various industries1,2,3,4. For example, magnetism is used as a nondestructive testing method for building steel structures. However, structural steel exhausts can fail during service, which may lead to disasters. Therefore, monitoring the stress of structural steel members is vital. Structural steel, a low carbon alloy steel for buildings and bridges, is a ferromagnetic material or soft magnetic material3,5. After smelting, welding and manufacturing, steel components can obtain a certain magnetism referred to as inherent magnetism. In recent research studies, magnetism has drawn much attention and is widely used in material nondestructive testing (NDT)6,7.
Based on the magnetization processes in steels, popular approaches include magnetic Barkhausen noise (MBN), magnetic hysteresis measurement (MHM), metal magnetic memory (MMM), and magnetic flux leakage (MFL) methods4,8,9,10. The inherent dependence of magnetic properties on atomic structure and microstructure leads to a certain relation between magnetic properties and mechanical stresses11. The magnetic variation in structural steel is sensitive to internal defects and external loads. Under the influence of mechanical stresses, the change in intrinsic magnetization is piezomagnetic for a ferromagnetic material. In 1865, Villari found that magnetism is subjected to mechanical actions such as tension or compression12,13. The change in the magnetism was caused by mechanical stress14. The results show that structural steel tension produces an increase in magnetization in weak fields and a decrease in strong fields. In fact, the stress of ferromagnetic materials is evaluated by the change in the magnetic field. The stress state of ferromagnetic materials can be assessed by the magnetic field intensity. Since then, the connection between the piezomagnetic field and applied stress has become a hot topic6,15.
For origins of the magneto-mechanical effect, Jiles4,15 presented a series of tests for the effect of uniaxial tensile stresses of up to 85 MPa on the Barkhausen activity and magnetic properties of steels. He proposed a theory of the magneto-mechanical effect model for MBN. The domain walls are unpinned by applying stress that makes the walls to move thus changing the magnetization. Dubov16 conducted a study of metal properties with the nondestructive testing (NDT) technique using magnetic memory as a method. Sablik et al.17,18 studied the biaxial stress effects on the MHM of steel with the stress field, and elucidated the variation in magnetic properties with grain size and dislocation density were considered. Bulte et al.19 presented a hypothesis to explain the mechanism by which externally applied stresses can affect the magnetic properties of ferromagnetic materials. According to Leng et al.20,21, the MMM signal response to plastic deformation of low carbon steel was explored by an experimental investigation. Wang et al.7 proposed a new method for estimating the location of the stress concentration and evaluating the degree of damage using a gradient curve.
Liu et al.22 studied the leakage magnetic field distribution on the surface of a reinforced bar in a bridge with axial tensile stress based on the magnetic memory effect of ferromagnetic materials. Guo et al.23 investigated the suitability of MMM technology for monitoring the damage in steel structures exposed to complex stresses in a pseudostatic test of a portal frame. Chen et al.24 conducted a series of static tensile tests and MMM measurements were carried out on the commonly used Q235 steel. Su et al.25 studied on the relationship between the strain and metal magnetic memory field of steel beams with four-point bending tests of Q235B steel I-beams. Li et al.26 demonstrated that data acquisition can be realized accurately using magnetic flux leakage inspection technology based on LabVIEW and that the distribution of the spectrum entropy can provide a method for monitoring crack growth through diagnosis of internal stress concentrations in materials.
In addition, Shi et al.2,9 promised a magnetoelastoplastic coupling model of ferromagnetic material with plastic deformation under applied stress and magnetic fields. A general nonlinear magneto-mechanical model for ferromagnetic materials was discussed under a constant weak magnetic field2. Moreover, Kachniarz et al.27,28 designed steel frame-shaped samples with both magnetizing and sensing windings coiled on their columns, and has made tentative explorations of the magnetoelastic characteristics under tensile stresses. Furthermore, Zhang et al.29 and Bao et al.14 observed that piezomagnetic signals can be detected using fluxgate magnetometers and probed the piezomagnetic behaviour of ferromagnetic steels are subjected to tensile stress. Kaleta et al.30 used the magnetovision as a tool for the investigation of the fatigue process of ferromagnetics materials. Weng et al.31,32 established an online nondestructive stress testing method for arch bridge suspenders based on the principle of magnetic coupling. In the abovementioned previous studies, the relationship between inherent magnetism and structural steel stress has rarely been mentioned. Therefore, to address this in needs, in this paper, uniaxial tensile tests were designed to establish a connection between the magnetic variation and stress.
In the current paper, the inherent magnetism of structural round steel and the relationship between inherent magnetism and stress were studied for low-alloy high-tensile structural Q390B steel. First, the experimental specimens were prepared and internal magnetic field intensity (IMFI) tests were designed. Then, an IMFI study was carried out. Furthermore, internal magneto-mechanical effect (IMME) tests were designed to discover the relationship between the internal magneto and mechanical effect under the low-frequency cyclic (LFC) tensile loading tests. Finally, the observed results were discussed in detail, and an internal magneto-mechanical effect model in relation to stress was proposed.
In the tests, three 32 mm structural round Q390B steel specimens were prepared in advance. The internal magnetic field of the body was considered to be uniform at the cross section of the round steel. The IMFI test of structural steel was designed with room temperature without electromagnetic interference.
The test round steel bar specimens were cut from the same round steel to ensure the stability of the original parameters. In Table 1, material composition and mechanical properties of structural Q390B steel specimens are provided according to the Chinese Standard33. These specimens are low-alloy high-strength structural steels. ‘Q390’ indicates that the yield limit value is 390 MPa. ‘B’ refers to low carbon steel. The steel specimens used in the tests are homogeneous.
The internal magnetic field intensity (IMFI) distribution of the inherent magnetism for the round steel bar test was carried out with the experimental equipment as shown in Fig. 1a. The test device was set in the shielding box to prevent the interference caused by an external magnetic field. A schematic diagram of the IMFI test is shown in Fig. 1a.
Schematic diagram of the experimental equipment. (a) Schematic diagram of the IMFI test; (b) schematic diagram of the measuring coil sensor; (c) measuring coil sensor; (d) magnetic shielding box; (e) TD8900 fluxmeter; (f) round structural steel bar specimen and scale label.
The measuring coil sensor is a winding device as shown in Fig. 1b and c. The device is wounded 500 times by a 0.18 mm copper wire with an inner diameter of 40 mm. Its external dimensions are as follows: the inside diameter is 35 mm, the outside diameter is 58 mm, and the length is 30 mm as shown in Fig. 1b and c. The parameters for measuring the coil sensor are shown in Table 2. The size of the shielding box is 350 mm × 350 mm × 500 mm, as shown in Fig. 1d. The thickness of the shielding box is 0.5 mm with the initial permeability μ0 = 68.8 mH/m, the maximum permeability μm = 377.5 mH/m, the coercivity Hc = 0.5 A/m, and the saturation magnetic induction intensity Bs = 0.75 t. The fluxmeter, as shown in Fig. 1e, is a compact instrument, with high accuracy, automatic drift correction, and microprocessor control, to allow the operator to configure the meter for maximum resolution and accuracy. Magnetic flux is used to inversely calculate the magnetic field distribution inside the magnet. The magnetic flux value of each measuring point is measured by the fluxmeter used in the experiment. The distance spacing of the measuring points was 50 mm. As shown in Fig. 1e, the magnetic flux value was collected by a TD8900 Fluxmeter manufactured by Changsha Tianheng Measurement and Control Technology Co., LTD. The steel bar is fixed in the shielding box. In the test, the diameter of the round steel specimen is 30 mm and the length is 500 mm. The round steel bar specimen and scale label are shown in Fig. 1f.
During the test, the measuring coil sensor was wrapped around the steel laterally and moved from the bottom to the top, as shown in Fig. 1a.
In the experiment, only the change in the relative magnetic flux was considered and measured at a specified point along the axial direction. There are two options to perform this experiment. One option is to first set the fluxmeter to zero, and the initial magnetic flux will be generated when the measuring coil sensor begins to move to the end because of the change in the actual magnetic field at the end of the round steel specimen. Another option is to set the fluxmeter as zero after determining the starting position of the specified measuring point. In such a case, the value of the first measuring point will be zero.
In this paper, the last option was chosen to conduct the IMFI tests of structural steel. First, the measurement sensor was moved to the specified measurement point position. Then the magnetic fluxmeter was set to zero and began to record the data of the specified point prepared. The magnetic flux values at the specified measuring points were measured along the coordinate position of the specimen. As shown in Fig. 1a, the positions of the specified measuring points were 0, 50 mm, 100 mm, 150 mm, 200 mm, 250 mm, 300 mm, 350 mm, 400 mm, 450 mm, and 500 mm, i.e., the forward method. After the measurement, the coordinate positions along the round steel are: 500 mm, 450 mm, 400 mm, 350 mm, 300 mm, 250 mm, 200 mm, 150 mm, 100 mm, 50 mm, and 0 mm, i.e., the reverse method. After the bidirectional measurement, the test was finished. Therefore, the measurement error was reduced by taking the mean value of the bidirectional measurement.
The tests were designed and conducted to obtain the internal magnetic field intensity distribution of the inherent magnetism for round steel specimens with the condition of no load and no external magnetic field in the at room temperature environment. According to the change in magnetic flux inside the round steel body, the distribution of magnetic field intensity B inside the round steel body along the length can be calculated by the Eq. (2) changed from Eq. (1).
where (Phi) is the magnetic flux; n is the number of windings for the measuring coil sensor; B is the magnetic field intensity inside the round steel body; and S is the area of the magnetic field intensity inside the round steel body.
The experimental tests were conducted at a temperature of 20 ± 3 °C. In the IMFI test, three 32 mm specimens of round steel bars were tested, and experimental data of the testing points were recorded by fluxmeter software on a computer. In the tests, the forward and reverse contrast method was used to eliminate the error. Through the test, it was found that the existing magnetism in the round steel was not affected by the external environment. The internal magnetic flux field distribution of the structural round steel bar specimen at the cross section of the round Q390B steel is shown in Fig. 2.
The internal magnetic flux field distribution curve of the inherent magnetism for the round Q390B steel bar.
In the IMME tests, the round steel member was taken as the research object. The relationship between the internal magnetic field intensity and the stress for the round steel bar was very important for detecting the stress and strain of round steel under loading. In the tensile test, the position of the section neck was difficult to determine after the material entered the plastic deformation stage. This was related to the composition of the metal materials and casting defects. Therefore, the relationship between magnetic variation and stress was designed within a certain tensile stress range. The change in the magnetic field intensity in the round steel specimen causes a change in the electric current in the measuring coil sensor. The value of the change can reflect the changing law of the magnetic field in a round steel member.
The stress of the round steel bar was determined by the uniaxial tensile test. Under the action of stress, the round steel will cause strain along the length and the direction of the cross section. At the same time, the strain along the length and the direction of the cross section will cause a change in the magnetic field intensity inside the round steel. Therefore, the relationship between stress and magnetic field intensity can be obtained through data processing and analysis. Based on this method, a relationship test between magnetic field intensity variation and stress was designed.
The loading and unloading of the tensile test were completed by the universal material mechanics testing machine as shown in the Fig. 3a shown. This instrument was a microcomputer-controlled motor universal testing machine WDW-300 made by Jinan EAST Testing Instrument Co., LTD., as shown in Fig. 2a. The performance parameters are as follows: power: 1.5 kW; voltage: 220 V; accuracy: ± 0.5%; speed range: 0.05–500 mm/min; maximum load: 300 kN; stretch space: 650 mm. Moreover, the measuring coil sensor was still wrapped in the lateral direction of the round steel bar, as shown in the middle. The measuring coil sensor was a winding device as shown in Fig. 1b an c, and the detailed parameters are listed in Table 2. In this study, the microcurrent measuring instrument was improved to measure the internal magnetic field intensity of the 32 mm structural round Q390B steel specimens. The current intensity measuring system was used to measure the change in the internal magnetic field intensity during axial loading according to the designed loading scheme. The current intensity measuring system has three measurement switching gears, i.e., nA, μA, and mA, to choose from as shown in the Fig. 3b.
Schematic diagram of IMME test equipment. (a) Electrohydraulic servo testing machine and testing schematic diagram; (b) the current intensity measuring system.
The test was conducted under the conditions of constant temperature and humidity. The test temperature was kept at 20 ± 3 °C and the humidity was between 25 and 28%. During the loading process, the interference of the environmental magnetic field was ignored. According to the designed tensile strength of 335 MPa (Code for design of steel structures, China), the relationship between the internal magnetic field intensity and the stress for round steel bars was just studied within the elastic range. Finally, the loading scheme is shown in Table 1. The loading speed was 10 MPa/s and the maximum load was selected as 330 MPa. The proportional limit stress σP was determined by tensile testing. The load target was 60 kN, the real stress is 75 MPa, and the specimens were in the elastic phase.
The universal material mechanics testing machine was equipped with a nonconductive fixture. The load path was selected within the elastic range for the structural round Q390B steel specimens. The preloading rate was determined to be 5 mm/min, and the preload was 1 kN. After reaching the target value of 1 kN, the machine started loading at a rate of 1 kN/s. During the test, the value of magnetic flux at the middle point of the specimen was measured and recorded synchronously. The test was repeated 5 times, each load ranging from 0 to 60 kN. The whole process was as follows: First, the test specimen with measuring coil was fixed, and the test fixture was tightened. Second, the motor universal testing machine was stretched to the specified value of 60 kN at the rate shown in Table 3, which was maintained for 5 s. Finally, after the holding time was reached, unloading to 10 kN was performed at the same rate, and then this process was repeated 5 times, as shown in Fig. 4.
Test loading force and time t curve.
In the study, the existing magnetic variation characteristics at the mid-span point of the round steel specimen were selected. A special bandage was used to hold the measuring coil at the centre of the round steel specimen. In this way, the measuring coil was kept in the middle of the specimen during the tensile test.
Through the experiment, we can conclude that the measuring coil is produced by the induction current in the measurement, which can be given the strength value of the field by collecting, integrating and processing the current size. The change in IMME at the midpoint of the round steel specimen under LFC tensile loading and unloading. The experimental data of the testing points were recorded by the current intensity measuring system. According to the testing results on the universal tester above, the current intensity change curve of the time-varying process in the test is obtained, as shown in Fig. 5. Under the action of axial tension, the stress produced by the steel axial force deforms the whole steel body, which reflects the strain, longitudinal tension and transverse contraction.
Current intensity and time curve.
The internal magnetic field distribution curve of the inherent magnetism for the round Q390B steel bar was converted at the cross section of the round steel, as shown in Fig. 2. The fitted curve is also shown in Fig. 2. The measurement results and the fitted curve can be used to obtain the value of the magnetic field intensity by transformation of Eq. (2). The internal magnetic field intensity curve is shown in Fig. 6.
The internal magnetic field intensity curve.
The x-axis is the position of the measuring point along the length of the round steel, and the y-axis is the magnetic field intensity. The intensity of the magnetic field increases from one end to the other, reaches its maximum at the midpoint, and decreases afterwards. It can be seen from the results that the magnetic field intensity is the maximum at the middle of the round steel. The magnetic field intensity is 0.0172 T at the midpoint of the specimen. The fitting results show that the intensity of the magnetic field distribution is parabolic along the length direction. According to the test results shown in Fig. 6, the following equation was obtained from the fitting of a polynomial:
Here, x is the distance of the specimen with dimensions in millimetres (mm). For the round steel specimen, the intensity distribution of the magnetic field is related to the size of the round steel. Furthermore, the production and casting of the structural steel was analysed after a series of technological processes, including argon blowing in the converter, ladle bottom, wire feeding, refining, slab continuous casting, heating, descaling, cooling, etc. During smelting and casting, the structural steel was in the form of sheet steel, and section steel or bar steel served as the raw material of the steel structure. In this process, the refined molten steel crystallizes into a slab through the slab continuous casting process at a reduced temperature. During high-temperature continuous casting, heating and cooling, iron atoms and carbon atoms are dissolved. Temperature changes in smelting and casting promote the dissolution of carbon atoms in the lattice and the mutual transformation of austenite and martensite. All procedures mentioned above affect the magnetic properties of the structural steel.
For the specimen, the magnetic field intensity of inherent magnetism is 0.0172 T at the midpoint. In the elastic stage, when the load is loaded to 60 kN, the actual axial stress is 75 MPa. At this moment, the relation diagram of the current intensity variation and force after five cycles of LFC tensile loading and unloading are shown in Fig. 7. The first tensile loading and unloading cycle in the test is shown in Fig. 8. The first main loading stage is from point Ls to Le. As the load increases, the current generated by the magnetic field changes increases. Continuous output current from the measuring coil sensor can be seen from the figure. Point O to Le is a preloading stage. The curve jump point Lsj occurs at the beginning of the loading. The value of La is 0.68 nA with a force of 16 kN. Subsequently, the current intensity change increases to − 1.58 nA with a force of 60 kN. Point Le is a turning point from the loading and unloading transition. The results of the current intensity jump from point Le to Us. In the unloading stage, the curve is from point Le to Us to Ue. The current intensity change increases to 1.55 nA with a force of 55 kN. The value of Us is 0.50 nA with a force of 10 kN. The second cycle began loading from point Ue to La to Le. The curve jump point occurs during the loading and unloading transition or the unloading and loading transition.
Current intensity and force curve.
Current intensity and force curve of the first LFC test.
By changing the coordinate system, the relation of the current intensity and fitted curve stress is shown in Fig. 9. When the force was loaded to 60 kN, the actual axial stress of the cross-sectional stress of the structural round steel specimen was 75 MPa. The internal magnetomechanical effect model was derived as follows.
Current intensity and fitted stress curve of the LFC tests.
In the loading stage, the cross-section stress (sigma_{loading}) is fitted as Eq. (4) by the first-order decay exponential function for the midpoint of the specimen.
In the unloading stage, the cross-section stress (sigma_{unloading}) is fitted as Eq. (5) by the first-order decay exponential function for the midpoint of the specimen.
For the loading stage, the value (Delta sigma_{loading}) of different t2 and t1 values can be derived from Eq. (4).
Here, It2 and It1 are the values of the current intensity at the start and end, respectively; e is a constant, also the base of the natural logarithm; and (Delta sigma_{loading}) is the value of the stress difference between I2 and I1. The internal magnetomechanical effect model in Eqs. (4) and (5) shows that the relationship between the current intensity and force is stable under the uniaxial stress of round steel in the elastic range. The change between I2 and I1 for the 32 mm structural round Q390B steel specimens can be calculated by the fitted exponential function Eq. (6). The formulas will also be used in detecting and monitoring the stress changes for steel structural members in civil or mechanical industries.
For metallic materials, especially polycrystalline metallic materials, the changes in internal crystal structure are very complex under the action of external forces. For structural steels, the magnetic properties are even more complex for steel members under complicated stress. The study of complex magnetism involves many subjects, such as metal material science, microstructure characterization, quantum mechanics, and micromechanics. For traditional mechanics, the mechanical properties of structural steels cannot be explained clearly. In the tests, the relationship between the current intensity and force is stable under the uniaxial stress of round steel in the elastic range. The relationship between stress and magnetic properties can reflect the mechanical relationship. The relationship can be used to predict the real-time stress condition of steel structural members. By analysing the results of the two experiments, the relationship between the change in stress at the middle point of the round steel and the change in magnetic field intensity is obtained. Finally, it should be noted that the relationship between the internal magnetic field intensity and the stress of the round steel bar is very important for detecting the stress and strain of round steel under loading.
In this paper, an experimental approach was taken to determine the connection between the internal magnetic field intensity and the stress for round steel bars in the elastic range of the material. The results of the study aim to propose a novel way to measure stress changes, which will also be used in detecting and monitoring stress changes for steel structural members in civil or mechanical industries.
In IMFI tests, the internal magnetic field intensity is not evenly distributed along the length, showing a symmetrical distribution. The maximum value appears at the middle point of the round steel bar. The fitting results show that the intensity of the magnetic field distribution is parabolic along the length direction, as shown in Eq. (3).
In IMME uniaxial tensile tests, the relationship test between the magnetic field intensity variation and stress of the existing magnetism was studied in the loading and unloading phases. The internal magnetomechanical effect model shown in Eqs. (4) and (5), demonstrates that the relationship between the current intensity and force is stable under the uniaxial stress of round steel in the elastic range.
There was a jump point for the current intensity value that occurs during the stage of the loading and unloading transition or the unloading and loading transition in the elastic stage. The internal magnetic domain of structural steel is stable, showing the characteristics of the magnetic effect under a low cyclic reciprocating load. It can be concluded that the variation in the magnetic field in round steel is regular under tension. For the 32 mm structural round Q390B steel specimens, the model changes between I2 and I1 can be calculated by the fitted exponential function, Eq. (6). Future work will focus on studies of the relationship between the stress and strain of structural steel and the magnetism of the microstructure in thermodynamics and atomic mechanics.
All data generated or analyzed in the study are included within the paper.
Shi, P., Su, S. & Chen, Z. Overview of researches on the nondestructive testing method of metal magnetic memory: Status and challenges. J. Nondestruct. Eval. 39, 1–37. https://doi.org/10.1007/s10921-020-00688-z (2020).
Article Google Scholar
Shi, P., Jin, K. & Zheng, X. A general nonlinear magnetomechanical model for ferromagnetic materials under a constant weak magnetic field. J. Appl. Phys. https://doi.org/10.1063/1.4945766 (2016).
Article Google Scholar
Jiles, D. C. Review of magnetic methods for nondestructive evaluation. NDT Int. 21, 311–319. https://doi.org/10.1016/0308-9126(88)90189-7 (1988).
Article Google Scholar
Jiles, D. C. The effect of stress on magnetic Barkhausen activity in ferromagnetic steels. IEEE Trans. Magn. 25, 3455–3457. https://doi.org/10.1109/20.42333 (1989).
ADS CAS Article Google Scholar
Kachniarz, M. et al. Magnetoelastic characteristics of constructional steel materials. Adv. Intell. Syst. Comput. 317, 307–315. https://doi.org/10.1007/978-3-319-10990-9_28 (2015).
Article Google Scholar
Jiles, D. C., Thoelke, J. B. & Devine, M. K. Numerical determination of hysteresis parameters for the modeling of magnetic properties using the theory of ferromagnetic hysteresis. IEEE Trans. Magn. 28, 27–35. https://doi.org/10.1109/20.119813 (1992).
ADS Article Google Scholar
Wang, W., Yi, S. & Su, S. Experimental investigation of stress and damage characterization of steel beam buckling using magnetic memory signals. Struct. Design Tall Spec. Build. 25, 505–518. https://doi.org/10.1002/tal.1269 (2015).
Article Google Scholar
Pengpeng, S. & Zheng, X. Magnetic charge model for 3D MMM signals. Nondestruct. Test. Eval. https://doi.org/10.1080/10589759.2015.1064121 (2015).
Article Google Scholar
Shi, P. Magneto-elastoplastic coupling model of ferromagnetic material with plastic deformation under applied stress and magnetic fields. J. Magn. Magn. Mater. 512, 1–9. https://doi.org/10.1016/j.jmmm.2020.166980 (2020).
CAS Article Google Scholar
Clapham, L., Jagadish, C., Atherton, D. L. & Boyd, J. D. The influence of controlled rolling on the pulse height distribution of magnetic Barkhausen noise in steel. Mater. Sci. Eng. A 145(2), 233–241. https://doi.org/10.1016/0921-5093(91)90253-j (1991).
Article Google Scholar
Ktena, A. & Hristoforou, E. Stress dependent magnetization and vector preisach modeling in low carbon steels. IEEE Trans. Magn. 48, 1433–1436. https://doi.org/10.1109/tmag.2011.2172786 (2012).
ADS CAS Article Google Scholar
Erber, T., Guralnick, S. A., Desai, R. D. & Kwok, W. Piezomagnetism and fatigue. J. Phys. D Appl. Phys. 32, 2818–2836. https://doi.org/10.1088/0022-3727/30/20/008 (1997).
ADS Article Google Scholar
Villari, E. Ueber die Aenderungen des magnetischen Moments, welche der Zug und das Hindurchleiten eines galvanischen Stroms in einem Stabe von Stahl oder Eisen hervorbringen. Ann. Phys. 202, 87–122. https://doi.org/10.1002/andp.18652020906 (1865).
Article Google Scholar
Bao, S., Gu, Y., Hu, S. & Lou, H. Experimental analysis of piezomagnetic behaviour of ferromagnetic steels subjected to tensile stress. Strain 53, 1–8. https://doi.org/10.1111/str.12214 (2017).
CAS Article Google Scholar
Jiles, D. C. Theory of the magnetomechanical effect. J. Phys. D Appl. Phys. 28, 1537–1546 (1995).
ADS CAS Article Google Scholar
Dubov, A. A. A study of metal properties using the method of magnetic memory. Met. Sci. Heat Treat. 39, 401–405. https://doi.org/10.1007/bf02469065 (1997).
ADS CAS Article Google Scholar
Sablik, M. J., Augustyniak, B. & Chmielewski, M. Modeling biaxial stress effects on magnetic hysteresis in steel with the field and stress axes noncoaxial. J. Appl. Phys. 8, 4391–4393. https://doi.org/10.1063/1.369794 (1999).
ADS Article Google Scholar
Sablik, M. J. Modeling the effect of grain size and dislocation density on hysteretic magnetic properties in steels. J. Appl. Phys. 89, 10. https://doi.org/10.1063/1.1359167 (2001).
CAS Article Google Scholar
Bulte, D. & Langman, R. Origins of the magnetomechanical effect. J. Magn. Magn. Mater. 251, 229–243. https://doi.org/10.1016/s0304-8853(02)00588-7 (2002).
ADS CAS Article Google Scholar
Leng, J., Xu, M., Xu, M. & Zhang, J. Magnetic field variation induced by cyclic bending stress. NDT E Int. 42, 410–414. https://doi.org/10.1016/j.ndteint.2009.01.008 (2009).
CAS Article Google Scholar
Leng, J., Liu, Y., Zhou, G. & Gao, Y. Metal magnetic memory signal response to plastic deformation of low carbon steel. NDT E Int. 55, 42–46. https://doi.org/10.1016/j.ndteint.2013.01.005 (2013).
CAS Article Google Scholar
Liu, L., Zhou, J. T., Zhao, R. Q., Liu, R. M. & Liao, L. Automatic stress detection in reinforced bar based on metal magnetic memory. Int. J. Robot. Autom. 36, 354–362. https://doi.org/10.2316/j.2021.206-206-0652 (2021).
Article Google Scholar
Guo, H. et al. Relationship between applied force and magnetic field in a pseudo-static test of a portal frame. Int. J. Appl. Electromagnet. Mech. 66, 1–19. https://doi.org/10.3233/jae-190135 (2021).
Article Google Scholar
Chen, C. R., Zeng, S. J. & Su, L. Y. Strain energy based method for metal magnetic memory effect of tensile tested structures. J. Nondestruct. Eval. 38, 10. https://doi.org/10.1007/s10921-019-0579-4 (2019).
Article Google Scholar
Su, S. Q. et al. Experimental study on the relationship between the strain and metal magnetic memory field of steel beams. Insight 60, 380–386. https://doi.org/10.1784/insi.2018.60.7.380 (2018).
CAS Article Google Scholar
Li, X. M., Ding, H. S. & Bai, S. W. Research on the stress-magnetism effect of ferromagnetic materials based on three-dimensional magnetic flux leakage testing. NDT E Int. 62, 50–54. https://doi.org/10.1016/j.ndteint.2013.11.002 (2014).
Article Google Scholar
Jackiewicz, D., Szewczyk, R., Salach, J., Bieńkowski, A. & Kachniarz, M. Influence of stresses on magnetic B-H characteristics of X30Cr13 corrosion resisting martensitic steel. Rec. Adv. Robot. Meas. Tech. https://doi.org/10.1007/978-3-319-05353-0_57 (2014).
Article Google Scholar
Kachniarz, M., Jackiewicz, D., Nowicki, M. & Bie, A. Magnetoelastic characteristics of constructional steel materials. Adv. Intell. Syst. Comput. https://doi.org/10.1007/978-3-319-10990-9_28 (2015).
Article Google Scholar
Zhang, J., Jin, W. L., Mao, J. H., Xia, J. & Fan, W. J. Determining the fatigue process in ribbed steel bars using piezomagnetism. Constr. Build. Mater. https://doi.org/10.1016/j.conbuildmat.2019.117885 (2020).
Article Google Scholar
Kaleta, J. & Wiewiórski, P. Magnetovision as a tool for investigation of fatigue process of ferromagnetics. SAE Technical Paper Series. https://doi.org/10.4271/2001-01-4073 (2001).
Article Google Scholar
Weng, G., Wang, J., Liu, Y., Zhu, X. & Dai, J. Magnetic stress sensing system for nondestructive stress testing of structural steel and steel truss components based on existing magnetism. Sensors 20, 20. https://doi.org/10.3390/s20144043 (2020).
CAS Article Google Scholar
Weng, G., Yang, L. & Xiyu, Z. Stress testing of steel suspender of arch bridge model based on induced magnetic flux method. Adv. Mater. Sci. Eng. 2020, 7470156. https://doi.org/10.1155/2020/7470156 (2020).
Article Google Scholar
MOHURD of China. Standard for design of steel structures (GB 50017-2017). (China Architecture & Building Press, Beijing, 2018).
Google Scholar
Download references
This work is supported by the Key Research and Development Program of Shaanxi (Program No. 2022SF-085), the Opening Fund of State Key Laboratory of Green Building in Western China (LSKF202116), the Key Laboratory of Well Stability and Fluid & Rock Mechanics in Oil and Gas Reservoir of Shaanxi Province, Xi’an Shiyou University (No. WSFRM 20200102001), the Science and Technology Plan Project of Yulin (CXY-2020-053).
School of Urban Planning and Municipal Engineering, Xi’an Polytechnic University, Xi’an, 710048, China
Yang Liu, Kun Liu, Linlin Fan & Tao Yang
State Key Laboratory of Green Building in Western China, Xi’an University of Architecture and Technology, Xi’an, 710055, China
Yang Liu & Binbin Li
Department of Civil and Environmental Engineering, University of Michigan, Ann Arbor, MI, 48109, USA
Wentao Wang
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
Y.L., W.W., and B.L. wrote the main manuscript text. Y.L., K.L., L.F., and T.Y. conducted the tests. Y.L., K.L., and L.F. analyzed the data and prepared the figures. All authors reviewed the manuscript.
Correspondence to Yang Liu.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Liu, Y., Liu, K., Wang, W. et al. Study on the inherent magnetism and its relationship with mechanical properties of structural round steel. Sci Rep 12, 16078 (2022). https://doi.org/10.1038/s41598-022-20718-2
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-20718-2
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.
Lil Wayne Puts Miami Beach Mansion Up For Sale At $29.5M – HipHopDX
editions
Miami Beach, FL – Lil Wayne has reportedly put his sprawling Miami Beach mansion up for sale after shelling out $17 million for the estate in 2018.
According to The Real Deal, the platinum-selling rapper listed the seven-bedroom, nine-bathroom and two-half-bath home at 6480 Allison Road for $29.5 million, roughly 75 percent more than he paid for it four years ago.
Built by spec home developer Laurent Harrari in 2017, the expansive property boasts the 10,632-square-foot home, more than a half-acre lot on Allison Island, 110 feet of water frontage, a pool and cabana.
Additional amenities include a movie theater, wine cellar and 22-foot ceilings.
Lil Wayne previously sold his home on nearby La Gorce Island for $10 million, about $1.7 million less than his purchase price, in 2017. The property featured a skate park on the roof and shark lagoon.
But the Young Money superstar isn’t solely offloading his properties. Last year, he splashed $15.4 million on a lavish estate in Hidden Hills, California, making him neighbors with Kanye West, The Weeknd, Kylie Jenner and other celebrities.
Meanwhile, Weezy celebrated his 40th birthday alongside several legendary guests over the weekend, including YG, Keith Sweat, and Skip Bayless. Sweat serenaded Wayne with his 1987 hit “Don’t Stop Your Love,” while Bayless posted a photo of him hanging with his sports-obsessed friend on social media.
“Just returned from Lil Wayne’s 40th birthday party,” the Skip and Shannon: Undisputed co-host tweeted. “Had to leave early because have to be up in 4 hours. But … what a night. Love you, man. Happy40!!!”
related news
July 1, 2022
On the music front, Lil Wayne released his last album, Funeral, in 2020 is currently working on Tha Carter VI.
The New Orleans native teased the project’s arrival at Drake’s October World Weekend festival in August and has been spotted in the studio with old collaborators Wyclef Jean and Juelz Santana in recent weeks.
Cardi B Reveals She Lost Multi-Million Dollar Video Game Deal Due To 'Stupid Decisions'
news | Sep 28, 2022
A$AP Rocky Explains Viral Moshpit Video: ‘That Shit Not Funny’
news | Sep 28, 2022
will.i.am Says Beyoncé’s ‘Break My Soul’ Remix EP Was His Idea
news | Sep 27, 2022
Pakistan Security Breach: PM Shehbaz Sharif’s House Audio Recording Leaks Trigger Political Uproar in the – LatestLY
Islamabad, September 26: Pakistani politics is surrounded by backdoor engagements, closed door talks, public political rallies and massive challenges for the ruling quarters. But now, a new dimension has been added to the persisting uncertainty as a major security breach was witnessed after a leak of audio recordings suspected to be from the Prime Minister’s House, putting more pressure on the incumbent Shehbaz Sharif-led coalition government.
Audio clips of telephonic conversations between Sharif and an official of the Prime Minister’s House has gone viral on social media, raising concerns over the secret tapping of calls and the alleged misuse of power for personal gains. Video: Pakistan PM Shehbaz Sharif Struggles To Put On Headphones During SCO Summit Meeting With Russian President Vladimir Putin.
In the audio leaks, Sharif and the official are talking about the import of machinery from India illegally without getting approvals from the government quarters. And this is being discussed as per directives of the Maryam Nawaz, leader of Pakistan Muslim League Nawaz (PML-N) and daughter of former premier Nawaz Sharif. It has also been claimed by opposition PTI leader, Fawad Chaudhry that the audio leaks and about 8gb of data is up for sale on the dark web. Pakistan PM Shehbaz Sharif Says His ‘Speedy Work’ Will Frighten Imran Khan.
“Eight gb data of audio conversations of PM House is on sale on the dark web. The hacker has also claimed that conversations related to security are also in his possession. This is a serious serious matter of concern and an investigation needs to be launched immediately,” he said.
The audio leaks have also attracted serious criticism from the opposition parties as well as some ally parties, who have raised questions over security. “The audio leaks reveal that the Prime Minister’s House is being misused for personal gains. And the main culprit behind it is Maryam Nawaz,” former premier and PTI chief Imran Khan said.
On the other hand, Information Minister Mariyum Aurangzeb has stated that an inquiry may be launched into the matter after Shehbaz Sharif returns to Pakistan from London. “The decision to hold an inquiry into the audio leaks will be taken up by the Prime Minister once he returns to Pakistan,” she added.
However, a government official highlighted that the conversation in the audio does not reveal any wrongdoings. “Nowhere in those audio clips was anyone talking about diamonds and gifts. There was nothing controversial in the audio from the ruling party’s perspective,” the official said.
This is not the first time that audio conversations have been leaked where public office holders are discussing strategies and plans against their political rivals. But this current development comes at a time when Pakistan is going through its toughest politically uncertain times, coupled with worsening economic situation and Imran Khan’s strong show of public strength, claiming to topple the government through another long march and protest sit-in if it does not hold early elections.
(The above story first appeared on LatestLY on Sep 26, 2022 04:32 PM IST. For more news and updates on politics, world, sports, entertainment and lifestyle, log on to our website latestly.com).
Copyright © Latestly.com All Rights Reserved.
Numerical analysis of unsteady momentum and heat flow of dusty tangent hyperbolic fluid in three dimensions | Scientific Reports – Nature.com
Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 16079 (2022)
Metrics details
This paper explores the impact of MHD and viscous dissipation with joule heating on convective stretching flow of dusty tangent hyperbolic fluid over a sheet in 3D. A time-dependent magnetic field is applied along the z-axis and the sheet being stretched along the xy-plane. The fluid and dust particles motions are coupled only through drag and heat transfer between them. The effect of viscous dissipation with convection is appreciable when the generated kinetic energy becomes appreciable as compared to the amount of heat transferred. A well known bvp4c method has been used to find the fruitful results. Graphs and tables show the facts and figures for physical properties according to different parameters. The main findings are that Increase in power law index, magnetic field, Weissenberg effect, concentration of dust particles, and unsteadiness parameter reduces the flow of fluid and solid granules.
Flow behavior of solid-liquid two-phase flow systems depends on the properties of the dispersed solid phase, the continuous liquid phase that suspends the solids, and the interactions between the two phases. There are many strong reasons of study of fluid dynamics at macro and micro-level as well. At macro level mathematicians and engineers try to investigate the flows without defined boundaries but the case of nano or micro level is really very interesting. In this article we discussed how the surface forces affect the non-Newtonian behavior of solid-liquid suspensions, with the aim of having a deeper understanding of the rheological phenomena.In the classical technologies, paints, coatings, cement slurries, coal slurries, mineral tailings, ceramic oxides, drugs, and food materials are only a few of the many diverse applications. Concentrated suspensions have an immense significance not only in the classical technologies, but also in the emerging technologies as well as in biological systems. We can also detect the presence of a micro-organisms or any impurity in water or in any other liquid. Micro-organism could be considered as particles, not actually but in reference of size, like viruses are nano-sized (20 to about 100 nanometers in size) and bacteria are mostly micro-sized (about 0.5–3 (mu m)). Such type of study moves towards two phase or multiphase flows. In this write-up dust-particles are submerged in non-Newtonian tangent hyperbolic fluid. The prime-mover for the study of dusty flows was Saffmann1. Afterwards Drew2 derived a set of coupled equations Orr–Sommerfield, which were helpful to govern the infinitesimal distribution of dust particles in fluid. Then Mekheimer et al.3 used the same concept of equations gave results for peristaltic flow in a channel. Recently Bhatti and Zeeshan4 discussed the non-Newtonian flow of solid-liquid suspension. Most related and recent studies are given in following references5,6.
The boundary layer flow and heat transfer analysis over a stretching flat surface have many applications in industry such as polymer industry, paper production, rolling and manufacturing of sheets and fibers, drawing of plastic film etc. Parenthetically the study of the particulate flow has significant applications for cooling systems, matter separating systems, and purification of crude oil. The beginners of stretching flows were Sakiadis7, Crane8, Grubka and Bobba9. Wang10 started the study of 3-D flow over a stretching surface. Takhar and Nath11 studied the unsteady three dimensional flow because of stretching surface. A remarkable role in this research area played by Ariel12,13,14. Latest study regarding three dimensional boundary layer flow is done by Hayat et al.15 and Mair et al.16.
The consumption of non-Newtonian fluids found in many engineering and industrial processes, such as food mixing, blood flow, mercury amalgams, and lubrications. In view of intense need, many studies are focused on non-Newtonian fluids. This study is also for the non-Newtonian tangent hyperbolic considered as base fluid which obeys the power law model and capable of describing the shear thinning effects. In the last going decade the boundary layer flow as well as the peristaltic flow considered in the following literature. Akbar et al.17 discussed the stretching problem for 2D, Malik et al.18 proposed the numerical scheme for the flow over stretching cylinder, and Bibi et al.19 investigate the dusty flow over stretching surface. Flow can be disturbed or facilitate by changing the values of different physical parameters. Here we have considered the MHD, effect, joule heating and viscous dissipation with convective boundary conditions. Kumar et al.20 discussed the MhD flow of dusty tangent hyperbolic fluid under the effect of thermal radiations. Historically the front runner of the study of viscous dissipation in natural convection was Gebhart21. Joule heating (also related to resistive or ohmic heating) is the process where the power of an electric current is converted into heat as it flows through a resistance. The effect of viscous dissipation in natural convection is appreciable when the induced kinetic energy becomes appreciable compared to the amount of heat transferred. Above effects are discussed in a combine way in following different references22,23,24,25,26,27,28,29.
Precisely the focus of the current article is to study the three dimensional dusty tangent hyperbolic fluid flow with change in time while considering MHD. This study is different from the previous atricle30 in that respect, we have used different non-Newtonain base fluid and estimated heat flow is executed by joule heating and viscous dissipation with convection. The solution of highly non-linear problem is sorted out numerically.
Physical configuration.
The incompressible unsteady dusty tangent hyperbolic non-Newtonian fluid flow is considered in trheedimenional space. The consideration of temperature profile is under the effect of MHD (Magnetohydrodynamic), Joule heating and viscous dissipation with convective boundary conditions. Flow distribution is due to stretching sheet which is assumed to be placed in xy-plane and fluid is placed along the z-axis. The physical configuration is given in Fig. 1. The two phase modeling is followed by the reference4 and the cauchy stress tensor for tangent hyperbolic fluid is mentioned in the reference19,
where (mu _infty) is the infinite share rate viscosity and (mu _circ) is the zero rate viscosity of the fluid. n is known as power law index, (Gamma) is the time constant and (dot{gamma }) is defined below,
Here (A_1) is the first Rivilin–Ereckson tensor. The fluid tangent Hyperbolic is shear thinning so the (Gamma dot{gamma }<<1) should be considered. The tangent hyperbolic series Eq. (1) reduces to,
Problem can be modeled as:
conditions at the boundary are:
u, v and w are the fluid velocity components in abscissa, ordinate and applicate axis direction. Similarly (u_P), (v_P) and (w_p) are particles velocity components. (rho) is the density of the fluid and (rho _P) is the density of the particles. (sigma) is for electrical conduction. B(t) is the magnetic field. T is the fluid temperature and (T_P) is temperature of particles respectively. (U_w) and (V_w) are the stretching velocities. (T_w) is the temperature of wall, (h_f) is the heat transfer coefficient (HTC) and k is thermal diffusion. C is the volume fraction of the solid particles, S is the drag force, there are different correlations of it according to assumptions are defined by Chhabra in his book31. Here the considered value for S is given below,
Value of the above function is determined by Tam32. The correlation for viscosity of fluid-particle mixture is proposed by Charm and Kurland33.
For the conversion of Partial Differential Equations into Ordinary Differential Equations one need some transformations. Similarity transformations required for the conversion of PDE’s to ODE’s can be defined as
and to be noted that,
Here c is a balancing constant and (a>0) is for accelerated flows and (B_o) is the amplitude of applied magnetism. Using Eqs. (18)–(19) into Eqs. (4)–(13),
along with the boundary conditions
A is the unsteadiness parameter, M is the magnetic parameter, (We_x) and (We_y) are Weissenberg numbers along x and y-direction, Pr is Prandtl number, R is the fluid-particle interaction for velocity profile, (beta _T) is fluid-particle interaction for temperature profile, C is the volume fraction of the granules, (alpha) is the mass concentration, (gamma) is the ratio of the specific heat capacity of the fluid to the particles, s is stretching ratio, (Ec^*) is viscous dissipation parameter and (Ec_x), (Ec_y) are Eckert numbers in x and y-direction, defined below
where (tau _T) is the equilibrium time, required by dust particles to manage their temperature compatible to fluid. Skin friction for three dimensional flow is mentioned in Eq. (29),
coefficients will be reduced to
by inserting Eq. (30), into Eq. (29), one can get,
The expression for the Nusselt number is given in Eq. (33),
where (q_w) denotes the heat flux of the surface. Settle the value of (q_w) into (Nu_x) while considering the thermal radiations effective, one can get following relation for Nusselt number,
Here (Re_x=frac{U_w x}{nu }) and (Re_y=frac{V_w y}{nu }) are the Reynolds numbers.
The suitable method for the problem is bvp4c. For this one can convert equations in he following form:
The required dummy variables as shown in Eq. (41).
Set of Eqs. (35)–(40) can be molded in the initial value problem as:
the reduced endpoint conditions are
There is need of some initial guesses that are (s_{1},s_{2},s_{3},s_{4},s_{5}) and (s_{6}) in a way like integration of the system of ODEs fulfil the conditions at endpoints and obtained the solution for the system of Eq. (42)–(54).
Effect of “n” on the velocity distribution in x-direction.
Effect of “n” on the velocity distribution in y-direction.
Effect of “(We_x)” on the velocity distribution in x-direction.
Effect of “(We_y)” on the velocity distribution in y-direction.
In this section the results of the momentum and temperature boundary layers discussed graphically and numerically. Figures 2 and 3 show the behavior of the power-law index n that the rise in flow index decreases the velocity of both fluid and granules in both directions. Here the values are checked for (n<1) which are applicable for pseudoplastics fluids, so we can use the results for shear thinning fluids. Figures 4 and 5 are for describing the Weissenberg effect, (We_x) and (We_y) are time dependent parameters. Increase in Weissenberg parameter reduces retardation time will reduce the velocity of fluid and solid particles. The Weissenberg effec is actually rod climbing efffect which is associated with the non-Newtonain flows, so one can use the results for the different non-Newtonian fluids. Figures 6 and 7 shows the effects of applied magnetic field. The magnetic field causes Lorentz force which create hurdle in the fluid flow because of resistive nature, in result of which decreases the flow of fluid and solid particles as well in both directions. Figures 8 and 9 are plotted to check the change in velocity profile due to change in A. Graphs show that the increase in unsteadiness, reduces the velocity of fluid and solid particles in both directions. One can see in the graph that velocity decreases near the surface and increases away from surface. As A is defined as inversely proportional to stretching coefficient a. The increase in unsteadiness parameter A reduces the a, in result of which velocity of fluid and solid particles decreases.
Effect of “M” on the velocity distribution in x-direction.
Effect of “M” on the velocity distribution in y-direction.
Effect of “A” on the velocity distribution in x-direction.
Effect of “A’ on the velocity distribution in y-direction.
Effect of “C” on the velocity distribution in x-direction.
Effect of “C” on the velocity distribution in y-direction.
Effect of “R” on the velocity distribution in x-direction.
Effect of “R” on the velocity distribution in y-direction.
Figures 10 and 11 depict the outcome of volume fraction that accretion of concentration enhances the resistance to flow due to which boundary layer becomes shorten in both directions. As the flow is solid-liquid so results show that more the solid will redues the flow rate, we can adjust the flow rate by changing the amount of solid particles in mixture flow. Figures 12 and 13 assimilate the out-turn of interaction between fluid and dust particles R. The interaction reduces the flow of fluid and enhances the speed of dust particles because more the interaction more the particles will flow but due to interaction the resistance increases due to which speed of fluid reduces. Same results are shown in both directions. Figure 14 shows that while enhancing the power law index there is a decrease in temperature of the fluid. The same results for the velocity profile due to power law index and we know that temperature is connected with kinetic energy relation. So we can say that decrease in velocity will reduce the kinetic energy and in turn the temperature of fluid will decrease. Figure 15 shows that rise of unsteadiness decreases the temperature profile. Enhancement in unsteadiness decline the flow of fluid in turn decreases the temperature of fluid. Figures 16, 17 and 18 show that increment of viscous dissipation parameters (Ec^*), (Ec_x) and (Ec_y) enhances the temperature of the system because heat generated during the dissipation due to viscous forces. The produced heat absorbed by the fluid and thicken the thermal boundary layer of fluid and solid particles. Figure 19 shows the results for Prandtl number. Prandtl number has an inverse relation with the thermal conduction of fluid, the enhancement of Pr reduces the temperature of fluid and dust particles as well. Figure 20 shows that enhancement of mass concentration (alpha) reduces the temperature profile of fluid after attaining the maximum value for balancing of the temperature profile of the fluid and solid particles. Figure 21 shows that the enhancment of fluid-particle interaction (beta _T) reduces the temperature profile of fluid and raises the temperature of solid particles. Figure 22 shows the impact of volume fraction of solid particles C on temperature profile. Increase in number of particles the temperature boundary layer decreases because increase in fraction of granules causes resistance results in the generation of internal energy turns to utilized to keep the temperature of the mixture at state of equilibrium. Figure 23 shows that temperature profile increases with increase in Biot number. This is due to the fact that the convective heat exchange at the surface leads to enhance the thermal boundary layer thickness. Figure 24 shows that with the increase in stretching ratio parameter there is decrease in velocity in x-direction and increases in y-direction. And the reason is clear that (s=frac{b}{a},) s is directly proportional to b and inversely proportional to a. So increase in s increases b which is coefficient of (V_w) and decreases the a which is coefficient of (U_w). In Table 1 we have compared the of results with the online published articles by the Ariel12 and Hayat et al.34 in which they have solved the problem by exact method and numerical technique as well. The present data founded by bvp4c numerical method comparable with already published results. Tables 2 and 3 exhibit the changes in values of skin friction and Nusselt number for the considered parameters.
Effect of “n” on the temperature distribution.
Effect of “A on the temperature distribution.
Effect of “(Ec^{*})” on the temperature distribution.
Effect of “(Ec_x)” on the temperature distribution.
Effect of “(Ec_y)” on the temperature distribution.
Effect of “Pr” on the temperature distribution.
Effect of (alpha) on the temperature distribution.
Effect of (beta _T) on the temperature distribution.
Effect of C on the temperature distribution.
Effect of (zeta) on the temperature distribution.
Effect of s on the velocity distribution of fluid in x and y-direction.
The three dimensional unsteady dusty flow of tangent hyperbolic fluid is studied in this article. As we know that time is really important factor in real world so one of the purpose of this study to check the effects of different variables and factors while keeping in mind the effect of time on flows. Also the three dimensional flows are near to real world problems. Here the used concept is of solid-liquid flows which are of already existing flows on earth and using this concept we can take benefits at industrial level like fluidinzation. How these types of flows can be adjusted according to our requirements by considerering different effects. The effects of magnetic field and viscous dissipation with convection are discussed for fluid and dust particles as well. Also we can adjust the temperature of the system according to our requirments by controlling different used parameters. Outcomes of the current problem are mentioned below. Most of the parameter cause hindrance to flows, let have a glance to the results,
Increase in power law index, magnetic field, Weissenberg effect, concentration of dust particles, and unsteadiness parameter reduces the flow of fluid and solid granules in both x and y-directions.
Increase in interaction between fluid and particles drops the flow of fluid, simultaneously increases the velocity (in both x and y-directions) and temperature of dust granules.
Increase in Prandtl number reduces the temperature of fluid and dust granules as well.
Increase in viscous dissipation and Biot number rise the temperature of the system, increase the temperature of fluid and dust particles as well.
By using the above results we can control the flow and temerature of the system at industrial level in different areas especially in polymer industry, as in introduction the detailes for the industries and medical field significances are mentioned.
Saffmann, P. G. On the stability of laminar flow of a dusty gas. J. Fluid Mech. 13, 120–128 (1962).
ADS MathSciNet Google Scholar
Drew, D. A. Stability of a Stokes layer of a dusty gas. Phys. Fluids. 22, 2081–2086 (1979).
ADS MathSciNet MATH Google Scholar
Mekheimer, K. S., El Shehawey, E. F. & Elaw, A. M. Peristaltic motion of a particle fluid suspension in a planar channel. Intl. J. Theoret. Phys. 37, 2895–2920 (1998).
MATH Google Scholar
Bhatti, M. M. & Zeeshan, A. Analytic study of heat transfer with variable viscosity on solid particle motion industry Jeffery fluid. Mod. Phys. Lett. B. 30(1650196), 13 (2016).
Google Scholar
Ellahi, R. et al. Study of two-phase newtonian nanofluid flow hybrid with hafnium particles under the effects of slip. Inventions 5, 22 (2020).
Google Scholar
Bibi, Madiha, Malik, M. Y. & Zeeshan, A. Numerical analysis of unsteady magneto-biphase Williamson fluid flow with time dependent magnetic field. Commun. Theoret. Phys. 71, 143–151 (2019).
ADS MathSciNet CAS Google Scholar
Sakiadis, B. C. Boundary-layer behaviour on continuous solid surface. I. Boundary layer equations for two dimensional and axisymmetric flow. J. AIChE. 7, 26–28 (1961).
CAS Google Scholar
Crane, L. J. Flow past a stretching sheet. Z. Angew. Math. Phys. 21, 645–647 (1970).
Google Scholar
Grubka, L. J. & Bobba, K. M. Heat transfer characteristics of a continuous stretching surface with variable temperature. ASME J. Heat Transf. 107, 248–250 (1985).
Google Scholar
Wang, C. Y. The three-dimensional flow due to a stretching flat surface. Phys. Fluids. 27, 1915–1917 (1984).
ADS MathSciNet MATH Google Scholar
Takhar, H. S. & Nath, G. Unsteady three-dimensional flow due to a stretching flat surface. Mech. Res. Commun. 23, 325–333 (1996).
MATH Google Scholar
Ariel, P. D. Generalized three-dimensional flow due to a stretching sheet. J. App. Math. Mech. 12, 844–852 (2003).
MathSciNet MATH Google Scholar
Ariel, P. D. On computation of the three-dimensional flow past a stretching sheet. Appl. Math. Comput. 188, 1244–1250 (2007).
ADS MathSciNet MATH Google Scholar
Ariel, P. D. The three-dimensional flow past a stretching sheet and the homotopy perturbation method. Comput. Math. Appl. 54, 920–925 (2007).
ADS MathSciNet MATH Google Scholar
Hayat, T., Kiyani, M. Z., Alsaedi, A., Ijaz Khan, M. & Ahmad, I. Mixed convective three-dimensional flow of Williamson nanofluid subject to chemical reaction. Intr. J. Heat Mass Transf. 127, 422–429 (2018).
CAS Google Scholar
Khan, M., Salahuddin, T., Yousaf, M. M., Khan, F. & Hussain, A. Variable diffusion and conductivity change in 3D rotating Williamson fluid flow along with magnetic field and activation energy. Int. J. Numer. Methods Heat Fluid Flowhttps://doi.org/10.1108/HFF-02-2019-0145 (2019).
Google Scholar
Akbar, N. S., Nadeem, S., Haq, R. U. & Khan, Z. H. Numerical solutions of magneto hydrodynamic boundary layer flow of tangent hyperbolic fluid flow towards a stretching sheet with magnetic field. Ind. J. Phys. 87, 1121–1124 (2013).
CAS Google Scholar
Malik, M. Y., Salahuddin, T., Hussain, A. & Bilal, S. MHD flow of tangent hyperbolic fluid over a stretching cylinder: Using Keller box method. J. Magnet. Magnet. Mater. 395, 271–276 (2015).
ADS CAS Google Scholar
Bibi, Madiha, Zeeshan, A., Malik, M. Y. & Rehman, K. U. Numerical investigation of the unsteady solid-particle flow of a tangent hyperbolic fluid with variable thermal conductivity and convective boundary. Eur. Phys. J. Plus 134, 298 (2019).
CAS Google Scholar
Ganesh Kumar, K., Gireesha, B. J. & Gorla, R. S. R. Flow and heat transfer of dusty hyperbolic tangent fluid over a stretching sheet in the presence of thermal radiation and magnetic field. Intl. J. Mech. Mater. Eng. 13, 2 (2018).
Google Scholar
Gebhart, B. Effects of viscous dissipation in natural convection. J. Fluid Mech. 14, 225–232 (1962).
ADS MathSciNet MATH Google Scholar
Khan, M. I., Hayat, T., Khan, M. I. & Alsaedi, A. A modified homogeneous–heterogeneous reactions for MHD stagnation flow with viscous dissipation and Joule heating. Intl. J. Heat Mass Transf. 113, 310–317 (2017).
CAS Google Scholar
Kumar, K. G., Gireesha, B. J. & Manjunatha, S. Scrutinization of joule heating and viscous dissipation on MHD flow and melting heat transfer over a stretching sheet. Int. J. Appl. Mech. Eng. 23, 429–443 (2018).
CAS Google Scholar
Shehzadi, S. A., Hayat, T. & Alsaedi, A. Influence of convective heat and mass conditions in MHD flow of nanofluid. Bull. Pol. Acad. Sci. Tech. Sci. 20, 20. https://doi.org/10.1515/bpasts-2015-0053 (2015).
CAS Google Scholar
Guha, A. & Pradhan, K. Natural convection of non-Newtonian power-law fluids on a horizontal plate. Intl. J. Heat Mass Transf. 70, 930–938 (2014).
Google Scholar
Geethan Kumar, S. et al. Three-dimensional hydromagnetic convective flow of chemically reactive Williamson fluid with non-uniform heat absorption and generation. Int. J. Chem. Reactor Eng. 17, 28 (2018).
Google Scholar
Sankar, M., Do, Younghae, Ryu, Soorok & Jang, Bongsoo. Cooling of heat sources by natural convection heat transfer in a vertical annulus. Numer. Heat Transf. Part A Appl. 68, 847–869 (2015).
ADS CAS Google Scholar
Reddy, N. K. & Sankar, M. Buoyant convective transport of nanofluids in a non-uniformly heated annulus. J. Phys. Conf. Ser. 1597, 012055 (2020).
Google Scholar
Sankar, M., Kiran, S. & Sivasankaran, S. Natural convection in a linearly heated vertical porous annulus. J. Phys. Conf. Ser. 1139, 012018 (2018).
Google Scholar
Bibi, Madiha, Zeeshan, A. & Malik, M. Y. Numerical analysis of unsteady flow of three-dimensional Williamson fluid-particle suspension with MHD and nonlinear thermal radiations. Eur. Phys. J. Plus. 135, 850 (2020).
CAS Google Scholar
Chhabra, R. P. Bubbles, Drops, and Particles in Non-Newtonian Fluids (CRC Press, 2006).
Google Scholar
Tam, C. K. W. The drag on a cloud of spherical particles in low Reynolds number flow. J. Fluid Mech. 38, 537–546 (1969).
ADS MATH Google Scholar
Charm, S. E. & Kurland, G. S. Blood Flow and Microcirculation (Wiley, 1974).
Google Scholar
Hayat, T., Ashraf, B. & Shehzad, S. A. Three-dimensional flow of eyring powell nanofluid over an exponentially stretching sheet. Int. J. Numer. Methods Heat Fluid Flow 20, 20 (2015).
MathSciNet MATH Google Scholar
Download references
Department of Mathematics, Quaid-i-Azam University, Islamabad, 44000, Pakistan
Madiha Bibi & M. Y. Malik
Department of Mathematics, Purdue University, 150 N. University Street, West Lafayette, IN, 47907, USA
Madiha Bibi
Department of Mathematics and statistics, FBAS, International Islamic University, Islamabad, 44000, Pakistan
A. Zeeshan
Department of Mathematics, College of Sciences, King Khalid University, Abha, 61413, Saudi Arabia
M. Y. Malik
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
M.B. wrote the main manuscript. A.Z. and M.Y.M. has given the guidelines. All authors reviewed the manuscript.
Correspondence to Madiha Bibi.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Bibi, M., Zeeshan, A. & Malik, M.Y. Numerical analysis of unsteady momentum and heat flow of dusty tangent hyperbolic fluid in three dimensions. Sci Rep 12, 16079 (2022). https://doi.org/10.1038/s41598-022-20457-4
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-20457-4
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.
HIDIVE Streams Bibliophile Princess & Akiba Maid War in Fall 2022 – Anime Trending News
HIDIVE has announced that it has acquired the streaming rights to Bibliophile Princess and Akiba Maid War for its Fall 2022 anime simulcast lineup.
Tarou Iwasaki (Sweetness and Lightning) is directing Bibliophile Princess, with Mitsutaka Hirota (EDENS ZERO) as series screenwriter and Mizuka Takahashi (Overlord III co-sub character designer) as character designer. Other staff members include Junko Abe (Chihayafuru Season 3 animation director) and Shinichi Yoshikawa (Date a Live IV Ep 5 and 11 monster designer) as sub-character designers, Hitomi Yoshida (The Vampire Dies in No Time) as art director, Harue Ohno (Chihayafuru Season 3) as color designer, Junko Sakai (Akebi’s Sailor Uniform) as photography director, and Yuuko Fukushima (Kodai Ouja Kyouryuu King: D-Kids Adventure) and Tomotaka Oosumi (SD Gundam World Heroes) as music composers. Madhouse is in charge of the animation production.
Meanwhile, the voice cast consists of Reina Ueda as Elianna Bernstein, Ryouhei Kimura as Christopher, Kouki Uchiyama as Alexei Strasser, Yuuma Uchida as Glenn Eisenach, Wataru Hatano as Theodore, Gen Satou as Alan Ferrera, Ayaka Nanase as Eilieen, Ryouhei Azakami as Irvin Olanza, Nobunaga Shimazaki as Alfred Bernstein, and Taku Yashiro as Jean.
Bibliophile Princess is adapted from a series of fantasy romance light novels written by Yui and illustrated by Satsuki Shiina. The series is published under Ichijinsha’s Iris Neo label and was first launched on July 1, 2016. The seventh volume will be released on October 4, 2022. J-Novel Club releases the light novels in English. A separate manga adaptation by Yui Kikuta was launched in 2019.
HIDIVE describes Bibliophile Princess as:
Known as the Bibliophile Princess for her unquenchable love of books, Lady Eliana Bernstein wants nothing more than to shirk social duties in favor of retreating to the library. So, when the handsome Crown Prince Christopher promises to shield her from high-society drudgery in exchange for pretending to be his fiancée, she jumps at the chance to hide behind their sham relationship and read to her heart’s content (especially since he’s offered her access to the palace library). But much like the plot of her favorite novel, soon Eli’s feelings for the prince develop in unexpected ways, and she realizes she can’t always judge a royal book by its cover.
Meanwhile, Akiba Maid War is directed by Souichi Masui (Rascal Does Not Dream of Bunny Girl Senpai), with Yoshihiro Hiki as series screenwriter and Manabu Nii (The Day I Became a God) as character designer. Other staff members consist of Kouhei Honda as art director, Naomi Nakano (Sword Art Online the Movie -Progressive- Aria of a Starless Night) as color designer, Rumi Ishiguro (I’m Quitting Heroing co-photography director) as photography director, and Yoshihiro Ike (takt op.Destiny) as music composer. P.A.Works is handling the animation production and Cygames is credited with the series’ music production.
The main voice cast for the original anime series includes Reina Kondou as Nagomi Wahira, Rina Satou as Ranko Mannen, Minami Tanaka as Yumechi, Tomoyo Kurosawa as Shippon, and Ayahi Takagaki as the owner of the Tontokoton maid cafe.
Akiba Maid War is described by HIDIVE as:
Akihabara is the center of the universe for the coolest hobbies and quirkiest amusements. In the spring of 1999, bright-eyed Nagomi Wahira moves there with dreams of joining a maid café. She quickly dons an apron at café Ton Tokoton, AKA the Pig Hut. But adjusting to life in bustling Akihabara isn’t as easy as serving tea and delighting customers. Paired with the dour Ranko who never seems to smile, Nagomi must do her best to elevate the Pig Hut over all other maid cafés vying for top ranking. Along the way she’ll slice out a place for herself amid the frills and thrills of life at the Pig Hut. Just when Nagomi’s dreams are within her grasp, she discovers not everything is as it seems amid the maid cafés of Akihabara.
HIDIVE’s complete Fall 2022 lineup has so far includes:
Source: HIDIVE
Blind Moose Studios bridges artistic community – Reminder Publications
Sept. 27, 2022 | Ryan Feyre
[email protected]
Tommy and Daniel Carr are making headway in their new music studio in Northampton, where they hope to work with artists all over the region and strengthen relationships in and around the city.
Reminder Publishing submitted photo
NORTHAMPTON – An analog and digital recording studio on 2 Conz St. in the Unit 22 Maplewood Shops is making headway by looking to bridge the artistic community in Western Massachusetts, Connecticut and beyond.
Blind Moose Studios, which was co-founded by brother musicians Daniel and Tommy Carr in 2014, provides mixing, mastering, production and sound design for artists all over New England, and even some outside of the region. Now, after moving into the new studio in Northampton at the start of 2022, the duo is bridging the gap between artists from their old home base in Connecticut and the bustling scene in and around Northampton.
Background
Blind Moose initially began as a way for the brothers to write and record their own projects before branching out to offer recording services for their friends, and eventually 100-plus artists from around the region. “It was really borne out of a necessity to write and record our own projects,” said Daniel.
After working as an intern for recording studios in Los Angeles during the early part of the 2010s where he learned the multi-faceted aspects of recording, Tommy moved back home to Connecticut, and he and Daniel started honing in on the vision for the studio while simultaneously working on their own projects.
“We started playing open mics, so we started getting introduced to people in the Connecticut area, and we started doing live sessions,” said Tommy.
Daniel added, “We started doing live shows at our house, and that kind of lead to meeting other bands and artists, and eventually turning some of that into what was always and what would become the studio.”
After spending half a year at their mother’s house, the brothers moved into what was known in Connecticut as Blind Moose Studios.
“I will say, in those days, Dan was much more of the musician while I was more coming from the production side,” said Tommy. “It made sense to merge our powers for a greater purpose.”
Developing as musicians and allowing others to flourish
At this point, both Tommy and Daniel are proficient in many facets of musicianship. Both work on a variety of projects that meld different genres together, including punk, new wave, MPC production, soul, R&B, singer/songwriter and sprinkles of rock.
Their dynamic styles and expertise have bled into their studio work, allowing them to collaborate with artists from a range of genres. “We’ll essentially be helping someone produce their project, and we’re able to approach that with a songwriting mentality and an engineering side,” said Daniel. “It’s nice to have that balance. We just love making sounds from sounds.”
The studio’s website shows a list of projects they collaborated on in the past with artists such as King Bongo, Funnybone Records & Friends, Laura Wolf and many more. The studio’s Facebook page also provides updates about the artists and projects they most recently worked on, including The Human Fund’s self-titled project and Niamh’s recent single “No Fire.”
“In the studio, we just love sounds, so anyone that comes to us and wants to be recorded, we’ll help them out,” added Tommy. “We’ve had a lot of fun allowing people to go in their own direction, and then we just help guide them a little bit. We like to let people turn the knobs.”
The move to Northampton
After several years in Connecticut, the brothers moved up to Northampton and officially opened the studio. After briefly bouncing back and forth between Connecticut and Northampton, the brothers decided to only operate in the nucleus of Hampshire County.
The move was a natural one for Tommy and Daniel, as they each shared a love of visiting the city for shows and the local record shops, like Turn It Up Records.
“I’ve wanted to move up to Northampton since I was maybe 17 or 18,” said Daniel. “I just went up there a lot, like a lot of people from Connecticut.”
While both artists consider the Hartford area a home base creatively, they also wanted to move to Northampton to branch out and meet more people. “It just seems like we needed a concrete spot with a little bit more direction toward the arts,” said Daniel. “When you think of Hartford, you think of insurance, but when you think of Northampton, you think of an art-centric place.”
Even in a short nine months, the brothers can already feel the vibrancy of being so close to downtown Northampton. “Our workflow is able to flourish because of the space,” said Daniel. “It’s been nice being in Northampton. I think our artists from the Hartford area enjoy it as well. It’s a nice destination.”
Tommy added, “One of our focuses is we’re really trying to get to know the area more. We’re trying to work different organizations and schools to extend the arm of audio engineering, which seems to be in certain areas. We’re trying to make the studio very accessible since they’re often very expensive and intimidating. We’re trying to break that.”
How tape has factored into their work
The duo’s use of tape for recording has been crucial to their success as a studio, as well. “We got an eight-track quarter inch tape machine a while back,” said Tommy. “Using tape, and just the different sounds you could get from tape, has been a big part of our recording journey.”
Daniel added, “It’s certainly an eye-opener, but also people have a lot of fun getting into that magic of analog.”
According to Tommy, the plug-ins added over the past two to three years provided a warmer feeling to the analog sounds compared to digital plug-ins. “The aspect of having to punch in physically and nail the take has its own set of benefits that can never be replaced,” said Tommy. “There is a sonic difference.”
Booking for the future
The brothers told Reminder Publishing that they usually book studio time by appointment unless they are mixing, mastering or editing.
“At any random time, we’ll have one or sometimes three or four ongoing projects,” said Daniel. “For example, we have someone coming up for three weeks.”
Tommy added, “We like to be flexible with people, but we certainly love it when we can lock in and really work on a project.”
While working on these projects, the duo also wants to bolster their community outreach, which is something they hope to do in the coming months.
“I think there’s another side of us that wants to have a little fun and make our own videos,” said Daniel. “And of course, we’re just continuing to learn and better our craft.”
The duo will have plenty of opportunity to do that in a city that continues to house a flourishing art scene.
Visit the Blind Moose Studios Facebook page to learn more about what the Carrs offer: https://www.facebook.com/BlindmooseStudios.
Share this:
Chinese Support for Putin’s War Looks More Shaky After Summit – The New York Times
Chinese Support for Putin’s War Looks More Shaky After Summit The New York Times
source
How VTube Studio’s NVIDIA integration is making VTubing more accessible – Dexerto
VTubing can be easy, but at the higher end it can be an expensive and intensive process. VTube Studio and NVIDIA are looking to change that, with new technology looking to make the streaming medium more accessible to all.
Getting into VTubing can be as simple as getting a couple of PNG images, plugging them into a Discord bot, and going live on Twitch. However it can also be a complex mix of Live2D or 3D models, with individual body parts animated and rigged to follow the streamer’s every move.
That upper echelon of VTubing can be quite hard to access. It requires high-quality equipment — either an iPhone or iPad to use face tracking, or a beefy enough computer to track those same expressions from a webcam. Either way, it’s a big hardware investment to get things running smoothly.
VTube Studio is one such face tracking software for VTubing, and one of the most popular out there. The PC program lets users load up their model before using a webcam or smartphone to track movements and mimic them on the model.
Denchi, the person behind VTube Studio, knows just how resource intensive the whole medium can be. While it’s inherently a PC application, many users opt to run it on their smartphone and send tracking data to their computer to cut down on CPU and GPU usage.
“Over the last few years, I’ve tried out pretty much every face tracking framework, but they are often unstable, highly experimental, or prohibitively expensive,” they told Dexerto.
“Most people use either the webcam-based face tracking or the iOS face tracking right now. The existing webcam face tracking in VTube Studio, an open-source library called OpenSeeFace, is already really impressive, especially considering it’s made from scratch by a single person.
“But both the webcam-based tracking and iOS tracking have their issues. The webcam-tracking is relatively resource-intensive and isn’t as accurate as iOS tracking, while the iOS tracking is very accurate and tracks more facial features, but users need an expensive iPhone or iPad to use it.”
However that barrier of entry is coming down even further with a new collaboration between VTube Studio and NVIDIA. The new NVIDIA Broadcast face tracking feature reduces the load on GPUs for VTubers looking to keep everything on their computer, and the Live2D program is one of the first to take advantage of it.
It has been “optimized for running most of the face tracking AI code… on its highly performant tensor cores that all their RTX series cards have” — the same stuff that makes your AAA games look silky smooth on PC, but can now also help with face tracking.
【📢】I've been working with the amazing people at @NVIDIAStudio over the last few months to bring their newly released NVIDIA Broadcast face tracking to VTube Studio!! ✨It works on any RTX-series GPU and is ACCURATE and HIGHLY PERFORMANT ✨Will be released early October! 🍂 pic.twitter.com/4dGl5ojqvp
It also looks smoother without impacting performance too much — in fact potentially surpassing what’s currently on the market, Denchi claims.
“The performance impact will be minimal and the tracking can be run alongside even the most demanding of games,” they continued. “The accuracy of the NVIDIA face tracking is also extremely good, coming really close to the quality of the current iOS tracking, perhaps even surpassing it in some aspects.”
The feature doesn’t just help VTube Studio, but any developer looking to use face tracking on NVIDIA GPUs. It opens up a wealth of opportunities for development in the VTubing space which could see the barrier of entry drop even further.
It’s a space NVIDIA is firmly trying to position itself in too. Gerardo Delgado Cabrera, the Product Line Manager at NVIDIA Studio working on the new Broadcast features, said it’s part of long-term plans to help “optimize” the VTubing space.
“As part of NVIDIA Studio we work with all the top creative apps – as well as upcoming ones,” he told Dexerto. “And one of the hottest areas of development in live streaming is VTubing.
“We reached out to all the top VTubing apps months ago, and started working with all of them to help them optimize their apps. There’s actually been improvements shipped already through NVIDIA Studio drivers to help with optimization and stability.
NVIDIA Broadcast’s face tracking will go live in October, with an update pushed to VTube Studio at the same time. This will help around 30% of users who have RTX-enabled GPUs. The update will also be completely free for all, and the manufacturer is working with the VTubing community to continually add new features and updates.
This includes a new tool in the augmented reality software development kit at NVIDIA called Face Expression Estimation, which “helps animate face meshes that can convey better emotions,” said Delgado.
It poses itself as a big leap for the tech side of the VTubing space, but at the end of the day, it’s only a small part of the experience. There’s still plenty of growth in terms of what VTubers could become, and Denchi is going to continually explore that with VTube Studio.
“I think tracking is certainly going to improve, but I also think it’s important to remember that tracking is only one aspect of VTubing. Personally, most of the VTubers I watch regularly have very basic tracking and often pretty simple models.
“At the end of the day, VTubers aren’t really that different from normal streamers. People watch VTubers because they like their personalities and stream content. While a good tracking setup can be helpful, nothing can replace a fun personality and interesting stream content.
“That’s what I want to focus on with VTube Studio. Most of the features I plan to add in the future are focused on improving viewer interaction and collaboration with other VTubers. That’s what I personally enjoy most and also what I think sets VTubers apart from normal streamers.”
Fortnite at 5: Can Epic Games' reign push beyond battle royales? – Washington Post – The Washington Post
Sign in
Your browser does not support the video element.
Even if you’ve never played, by now you know of “Fortnite.”
Five years ago the battle royale debuted for millions of people across the world, becoming one of gaming’s biggest titles and even launching some of its top players into new stratospheres of celebrity.
But what’s more interesting is what Fortnite could yet become — and how the game could reshape the internet as we know it.
DrLupo has made millions while streaming to his 4.5 million followers on Twitch and another 1.8 million subscribers on YouTube. He’s used that platform to raise millions more in fundraising for St. Jude Children’s Research Hospital, serving as something of a celebrity to the hospital’s patients, as well as their benefactor. All of this success, he said, can be traced back to five years ago when he decided to start playing a cartoonish shooter game called “Fortnite.”
“It’s the base for a lot of what I’ve been able to do in my career,” Lupo, whose real name is Ben Lupo, told The Washington Post in August. “It was hands down the most important thing that I ever did with streaming.”
[How well do you know 'Fortnite's' island? Take our geography quiz!]
“Fortnite,” the wildly popular battle royale that pits a hundred players against each other in a fight to be the last player or team standing, first released in September 2017. The game became an instant success, growing to hundreds of millions of players and raking in hundreds of millions in revenue every month despite being free to play. In the process, it became much more than a moneymaker, resonating in ways few entertainment products ever have.
For starters, “Fortnite” catapulted a number of Twitch streamers, such as Lupo, into a new stratosphere of fame. When Lupo started streaming the game, he played with Tyler “Ninja” Blevins, a friend and fellow streamer who, with his blue hair and knack for winning, became the poster child of “Fortnite’s” early viral success. Over time, Lupo said his Twitch channel grew from a few hundred viewers to more than 10,000 people all simultaneously watching him play “Fortnite” with Blevins and others.
Nowadays, Lupo, 35, has an exclusive streaming deal with YouTube for an undisclosed amount (Lupo said it leaves his family secure for life), and he’s raised more than $10 million for St. Jude from streaming “Fortnite” and other games. Meanwhile, Blevins is streaming everywhere — truly, on all possible platforms — and he’s turned his meteoric rise from “Fortnite” into an apparel line, a cover story in ESPN the Magazine and a gig co-hosting the 2018 New Year’s Eve festivities from Times Square.
“It blew the top off of gaming for everybody across the board,” Lupo said.
When “Fortnite” first launched, it filtered into all facets of life. It was ubiquitous and unmissable. Kids whipped out their “Fortnite” dances in the schoolyard. The game was blamed for a Boston Red Sox starting pitcher’s carpal tunnel. Parents, partners and, even, professional coaches all eventually asked the same question: “When will this end?”
It hasn’t yet. “Fortnite” is available on any internet-connected PC, console, phone or tablet near you, in part thanks to a mode now playable on web browsers. Some of the world’s most popular media franchises and sports leagues — from Star Wars and Darth Vader to the NFL — have in-game characters, apparel or set locations for “Fortnite’s” virtual island. The Russo brothers, the Hollywood directors best known for making some of the most ambitious movies in Marvel’s cinematic universe, brought their work into the game when “Fortnite” gave players control of the reality-bending Infinity Gauntlet owned by the Avengers’ nemesis, Thanos.
“As storytellers, we are motivated by our desire to consistently push the envelope of what is achievable,” Joe and Anthony Russo wrote in an email, responding to questions from The Post. “Bringing Thanos to the Fortnite Universe in such an authentic way was very gratifying to us and we are extremely interested in finding ways to continue to be a part of the Epic ecosystem.”
The Russo brothers added that their collaborations with Epic are based of a “shared vision of the future of storytelling.”
“No other game had done that at that point,” Ali “SypherPK” Hassan, said about the Thanos event. Hassan, a streamer with 6.2 million followers on Twitch, found success making videos about all the events and updates on “Fortnite’s” island.
“Fortnite” found mass appeal by swapping the hyper-realistic grit found in shooting games such as “Call of Duty” for a bright, cartoonish world that appeals to both adults and kids. As Lupo points out, there’s no blood in “Fortnite.” Other players are just eliminated.
LEFT: Darth Vader enters the battle royale. RIGHT: Spider-Man and other Marvel heroes have made frequent appearances in “Fortnite” as well. (Epic Games)
“You can have John Cena and LeBron James face off against Master Chief and Goku,” Lupo said. “It feels like a fever dream. Go back five years and tell me this is going to happen and I’d laugh in your face.”
In 2019, Drake and Travis Scott played “Fortnite” with Blevins and NFL wide receiver JuJu Smith-Schuster, shattering viewership records on Twitch at the time. Since then, the lines between popular music and the game have continued to blur. A year later, popular music producer and DJ Marshmello hosted the first-ever musical performance within the game in a suburban part of the island called Pleasant Park. Travis Scott and Ariana Grande followed up with shows of their own and recently MTV added a new music award to recognize the best such in-game performances. Now, iHeartRadio has created a private island within “Fortnite” to host performances, and it’s sponsored by insurance company State Farm.
Charlie Puth, who’s preparing to release his third studio album in October, recorded a live performance that debuted on the island at the beginning of the month.
“I’m not even going to pretend I know a lot about ‘Fortnite.’ I didn’t even know that they were doing virtual concerts,” Puth said. “I felt bad that I wasn’t one of the first ones doing it. So, I just hopped at the opportunity.”
To Puth, who isn’t much of a gamer, the show with iHeartRadio was just another platform to connect with fans online.
The game’s impact has been felt outside of the entertainment world as well. Last year, “Fortnite” was the focal point in a courtroom battle between Epic and Apple, in which the game developer claimed the iPhone maker was operating as a monopoly by requiring all iOS app distribution and monetary transactions run through Apple’s App store. When a judge ruled that Epic had failed to prove Apple to be a monopoly, it dealt a blow to Epic chief executive Tim Sweeney’s ultimate vision for the game and his company — the creation of the metaverse.
[Silicon Valley is racing to build the next version of the internet. Fortnite might get there first.]
The metaverse, simply, is an online digital world in which users can easily and seamlessly interact with brands, intellectual properties and each other online. In many ways, “Fortnite” has provided one of the clearest models of how such a vision could work. Epic Games is already in a long-term partnership with Lego, one of the most-popular building-blocks companies in the world, to create and “shape the future of the metaverse” together.
“Fortnite” did not start off as a battle royale game. In fact, it was originally launched as “Fortnite: Save the World,” a game where four players fend off zombies together by building defensive structures and crafting weapons. The game’s battle royale component, “Fortnite Battle Royale,” was developed in just two months after the launch of the initial “Save the World” mode. “Fortnite” wasn’t the first battle royale, an increasingly popular genre during the late 2010s, and was preceded by “PlayerUnknown’s Battlegrounds” and “H1Z1.” But, two weeks after the free-to-play portion released, “Fortnite Battle Royale” already had over 10 million players.
Epic Games declined to make anyone at the company available to discuss the creation, development and direction of “Fortnite.”
When “Fortnite” first released, Lupo said he was a bit hesitant to parachute in and leave his other games behind. He had some gripes with the gameplay but Epic just kept releasing new updates. Bugs were solved. Gripes were addressed. Epic continued to call the game a “beta” long after it first released. And alongside every update came a new weapon for players to fire off in the game.
“It used to be that you would see an update to a game every six months or maybe a year,” said Matthew Ball said, a former Amazon executive and the author of a book on efforts to construct a metaverse. “When ‘Fortnite’ came out, there weren’t very many other publishers that were making updates of significance every 90 days, but also minor changes three times per week.”
Ball said any notion that Epic’s success with “Fortnite” was a stroke of luck would be a mistake. “Fortnite” was not Epic’s “first or second big hit,” he noted. That honor belongs to “Unreal Tournament,” the seminal sci-fi first-person shooter Epic released two decades ago that helped make Epic the company it is today.
“Unreal’s” true legacy came from the game’s engine — a software framework that acts as the foundation and building blocks of a video game. It’s common practice for developers to license a game engine from another creator, and the Unreal Engine has been used to power hundreds of games today including “Mass Effect,” “BioShock,” “PlayerUnknown’s Battlegrounds” and of course, “Fortnite.” More recently, Unreal Engine has found a home in Hollywood, where it’s been used to create virtual sets for Disney’s “The Mandalorian” and HBO’s “Westworld.”
“Epic Games, they own ‘Fortnite’ but, really, their moneymaker is Unreal Engine,” Hassan, AKA SypherPK, said. “Their plan is to give people Unreal Engine tools to customize the ‘Fortnite’ experience and create new game modes.”
If people stop playing the battle royale “Fortnite” is based on, that’s fine, Hassan said. Epic Games wants to host user-generated islands and games that can live on “for years” past the original game. At the start of the year, Hassan announced he’s launching his own production studio in Austin to support content creators and potentially build maps or new game modes within “Fortnite.”
“If anything is going to be a separate universe that we hang out in, it would be ‘Fortnite,' ” said Kathleen Belsten, a 29-year-old Australian streamer known as “Loserfruit.” Belsten is one of a handful of streamers who have their own likeness in the game, which she describes as “cloning yourself in another universe.”
“ ‘Fortnite,’ as a game, over the years has slowly but surely transitioned into becoming a gaming platform. I think that genuinely is the future of ‘Fortnite,’ ” said Ali “Myth” Kabbani, a Twitch streamer with more than 7.4 million followers who first found an audience playing the game.
Kabbani and other streamers said Epic is attempting to turn “Fortnite” into a virtual sandbox. The game’s creative mode already lets players build, share or explore islands created by other players. Kabbani said that when Epic gives people more of the tools to really create entire games within “Fortnite’s” framework, it’ll be “a different ballgame” — less battle royale, more metaverse.
“We’re talking ‘Roblox.’ We’re talking ‘Minecraft’-level of creativity and community,” Kabbani said.
“Maybe we have already seen the peak of ‘Fortnite,’ " he said. “But I think we have yet to see the second peak of ‘Fortnite.’ ”
How to record audio on a Mac without downloading any apps – RouteNote
For Mac users, there are plenty of apps that have recording features like Apple’s pro-level DAW Logic Pro, or countless third-party options like FL Studio, Ableton, Cubase, REAPER, Pro Tools, Reason, etc. But if you just need to record a quick voice-over for your next TikTok using your MacBook’s built-in mics, you won’t want to or need to purchase, download and learn a new program.
There are three apps that can record audio that come pre-installed on all new Macs: GarageBand, Voice Memos and QuickTimePlayer.
If you need to do any editing to the audio, or need a specific file format or quality, we recommend GarageBand. It’s free to download on the App Store.
If you just need the raw audio and don’t want to learn how to use Apple’s free DAW, Voice Memos or QuickTime Player will do the job. Voice Memos couldn’t be easier to use, with just one primary function – audio recording.
Recordings are automatically saved to the cloud, so you can access them across devices. Use the icons in the top right corner to trim/adjust the audio. To save recordings outside of Voice Memos, simply drag the recording from the left menu to your desired folder.
To get the highest possible audio quality, click Voice Memos in the menu bar in the top left corner, then Preferences and switch the Audio Quality to Lossless.
Apple’s built-in media player can also record audio and video.
Your email address will not be published. Required fields are marked *
Sign up to our newsletter and make sure you don’t miss a thing!
Hit enter to search or ESC to close.
Bay Area software engineer allegedly assaulted aboard airplane in racist attack – Yahoo! Voices
A Bay Area woman, returning from a technology conference in Florida, was allegedly assaulted on board an airplane by another passenger using his seatback.
Thousands of protesters marched on Monday against economic and social reforms proposed by Colombian leftist President Gustavo Petro – which he says will fight inequality – just 50 days after he took office. Petro, 62, has promised to seek "total peace" through deals with rebel groups and crime gangs and asked lawmakers to approve a tax reform which would raise an initial $5.6 billion for social programs next year. Petro has constructed a majority in congress through alliances with a range of parties.
Tens of thousands of men are fleeing Russia for fear of being drafted into President Vladimir Putin's invasion of Ukraine. Putin ordered a partial mobilization last week.
England women's captain Heather Knight has accused India of "lying" about giving tailender Charlie Dean warnings before her controversial "Mankad" run-out in the third one-day international between the sides.
Twitter and Elon Musk are set to go to trial in October over the billionaire's attempt to back out of acquiring the social media company.
Saarah Sareshwala was asleep when the incident happened
A new study has found artificial sweeteners may be linked to heart disease and the risk of stroke.
How wonderful that his owner went back for his sibling.
In her new book, "Live Wire: Long-Winded Short Stories," the Emmy-winning talk-show host opened up about her experience joining "Live!"
Lin Xiaojun, who won South Korea's first gold medal of the 2018 PyeongChang Olympics as Lim Hyo-Jun, will now skate for China.
Federal Reserve Chairman Jerome Powell spoke about stablecoins, DeFi, and the prospect of a Fed-issued digital dollar in remarks Tuesday.
Claira Janover said she was doxxed after a TikTok of her making an analogy to argue against the "All Lives Matter" argument was taken out of context.
One item on the menu that I can talk about is the Mercedes EQB, an all-electric SUV that should be landing in dealer lots any day now. You also can send a direct message to @kirstenkorosec. Acton, which you may remember purchased docking and charging startup Duckt some months back, has begun rolling out docking/charging stations across Paris.
Federal Reserve Chairman Jerome Powell ramped up his criticism of decentralized finance on Tuesday, saying the monetary policy normalization worldwide has “revealed significant structural issues" in the DeFi ecosystem and exposed “conflict of interest,” as he called for more appropriate regulation. "Within the DeFi ecosystem, there are these very significant transparency, lack of transparency [issues]," he said at a conference hosted by the Banque of France.
Options trading activity does not yet hint at a bottom in U.S. stocks, Barclays derivatives strategists said on Tuesday, rebutting speculation among some investors that a record surge in put option trading volumes suggested the market may be nearing a reversal. With the S&P 500 marking a fresh bear market low on Tuesday, down 24% for the year, traders and investors are searching for clues as to when the market may bottom out. Trading in put contracts – typically used to protect against market losses – has surged, with a record 33.93 million put contracts changing hands on Friday alone.
Americans feel a lot better because of falling gas prices: A survey of U.S. consumer confidence jumped to a five-month high of 108 in September.
"Ask the nurse about the doctor when it’s just them in the room. If they say something vague like, 'We have very good providers here,' but don’t specifically say anything about your specific provider, that’s a red flag."View Entire Post ›
Witnesses saw the firefighter wearing the shirt while he worked on a hydrant Saturday. Fire officials said the shirt, whose slogan is a stand-in for insulting President Biden, “violates the Department’s uniform policy.”
MUMBAI (Reuters) -The Reserve Bank of India may have to resort to tried and tested measures to shore up its foreign exchange reserves, including encouraging non-resident Indians to deposit more funds, as it looks to stabilise a steadily declining rupee, economists said. The Indian currency has weakened 9.5% so far this year, with the central bank defending the rupee via dollar sales that depleted its forex reserves to $545 billion from the peak $642 billion a year ago. "The central bank should intervene to ensure that a falling currency does not eclipse India's fundamentals," Abheek Barua, chief economist at HDFC Bank, wrote in a note this week.
More Wall Street caution continues, this time from Goldman and BlackRock who both say bonds are a better bet right now.
Three games into a comeback from an Achilles tear, Shepard suffered a non-contact injury on the final Giants snap on Monday.
Warriors' Stephen Curry says he spoke with Adam Silver about Robert Sarver discipline, calls impending Suns sale 'exactly what should have happened' – ABC News
SAN FRANCISCO — Golden State Warriors star Stephen Curry, speaking publicly on the Robert Sarver matter for the first time Sunday, said he had private conversations with commissioner Adam Silver regarding the punishment handed down by the league to the embattled Phoenix Suns and Mercury owner.
"[I] got [Silver's] point of view of what decisions and, I guess, mechanisms he had to intervene and bring down a punishment that was worthy of the actions that we were all responding to and representing the league as a whole and protecting the integrity of the league and the standard that we set terms of from execs, ownership, all the way down to players," Curry said while addressing the situation during the Warriors' media day. "There should be a standard around what's tolerable and what's not."
The NBA announced Sept. 13 that Sarver would be suspended for one year and fined $10 million after an independent investigation found that he used the N-word at least five times "when recounting the statements of others" and was also involved in "instances of inequitable conduct toward female employees," including "sex-related comments" and inappropriate comments on employees' appearances. The NBA commissioned the investigation in the wake of an ESPN story in November 2021 detailing allegations of racism and misogyny during Sarver's 17 years as owner.
The NBA's announcement was met with backlash, as LeBron James, Chris Paul, Draymond Green and others spoke out and said the punishment wasn't severe enough. PayPal, the Suns' jersey patch sponsor, threatened to not renew their partnership with the team if Sarver remained owner. And Suns minority owner Jahm Najafi, the team's second-largest stakeholder, called for Sarver to resign.
Just over a week after his suspension was handed down, Sarver announced he is beginning the process to sell both the Suns and Mercury.
"I think the outcome was exactly what should have happened," Curry said. "Honestly, I thought with the punishment that was handed down, it would have dragged out a little longer, but I'm glad we got to a point where hopefully the team is up for sale sooner than later and can kind of move on knowing that's where it should be."
In an interview with Rolling Stone magazine published earlier this month, Curry expressed regret for not taking a public stance and boycotting the 2014 playoff game against the Clippers that followed the publication of an audio recording in which then-Clippers owner Donald Sterling made racist remarks — ultimately leading to his lifetime ban from the league.
Curry commended James, Paul and Green, his teammate on the Warriors, for using their public platforms to speak out on Sarver, and expressed appreciation to Silver for answering his call.
"The top players who have vested interests in protecting the league as well, all that stuff matters, and you want to have swift responses and reactions to stuff like that," Curry said.
After Sarver's suspension was handed down, but before he announced his intention to sell, Green recorded a 25-minute podcast episode in which he called on NBA owners to hold a vote to terminate Sarver's position as owner of the Suns.
"You know, if this is governed by a vote, then why isn't there a vote," Green said Sunday at Warriors media day, explaining the thought process he had during his podcast. "It's a 100 percent fireable offense. It's 100 percent forceable — to force a sale type of event. So why isn't there a vote if that's what has to happen?"
"I was very happy to see that he was selling the team because I think that's right," Green continued. "When you look at some of the things that people has gotten in trouble over, I think that falls under the same boat. And we're all a part of this league, and no one person is bigger than the league. If that goes for us as players, that goes across the board. We're still all a part of the league, no matter what level you're at."
24/7 coverage of breaking news and live events
FUNNY GIRL PIN
SHOP BEETLEJUICE
NEXT BWW EVENTS STREAM