JLL secures $133.6M financing for Nashville multi-housing development from Square Mile Capital JLL
source
JLL secures $133.6M financing for Nashville multi-housing development from Square Mile Capital – JLL
EQ Riskfactor: 68% of US Businesses More Profitable Than Before COVID-19 Pandemic – Monitor Daily
Become A Member
Sign Up for E-News
Subscribe to Print Magazine
According to a new report from EQ Riskfactor, 68% of U.S. businesses said they are more profitable today than they were before the COVID-19 pandemic compared to 71% of UK businesses. Similarly, 85% of U.S. businesses said they are optimistic about their business and growth during the rest of 2022 and 2023 compared to 90% in the UK market.
The report, titled the Global Business Borrower Report, provides a snapshot of current business sentiment in five markets: the United States, the United Kingdom, France, Germany and the Netherlands. To compile the report, Equiniti surveyed close to 500 businesses in a range of sectors across the United Kingdom, United States, Germany, France and the Netherlands about their current outlook and conditions. The survey consisted of 27 questions and was conducted in Q2/22.
Across all five markets, a clear majority (80%) of all businesses surveyed said they are optimistic about their business and growth during the rest of 2022 and 2023, including 28% who said they are extremely optimistic. Within mainland Europe, 80% of German businesses described themselves as confident, followed by France (76%) and the Netherlands (69%).
Nearly two-thirds (65%) of all European businesses surveyed also said they are more profitable today than they were before the COVID-19 pandemic, with France at 69%, Germany at 67% and the Netherlands at 43%.
“Despite concerns about the direction of the economy and a potential recession, it’s encouraging to see that U.S. businesses still have a positive outlook,” Aaron Hughes, CEO of EQ Riskfactor, said. “The businesses that have managed to stay afloat through the last few tough years are typically the most resilient. Many of these have also had to undergo some degree of cost-cutting in the last two years, as they were forced to right-size their cost base. This cost-cutting has put many companies in a strong position to profit from the reopening of the economy, but they will still have to face the substantial challenges that lie ahead.”
Despite this optimism detailed in the report, there are certainly some major concerns on the horizon. As the fallout from the pandemic continues, almost a third (31%) of U.S. businesses said that COVID-19 is still the biggest challenge they face. This was followed by worries about rising energy bills and inflation, which was highlighted by 17% of U.S. businesses, and supply chain disruption, which was selected by 14%.
Staff procurement was less of a concern in the United States, cited by only 9% of businesses as their biggest concern. Difficulties with the labor market were emphasized by more European businesses as a top concern, with 18% of German businesses ranking this first, followed by the Netherlands (14%), and France (11%). Just 7% of UK businesses pointed to labor market issues as a major concern.
Rising energy bills and inflation was a key concern across all respondents. Almost half (49%) of all businesses surveyed listed it in their top three worries. Similarly, 45% of all businesses put supply chain disruption in their top three concerns.
“There are certainly major challenges on the horizon, even for these resilient businesses. While concerns about the labor market have been loudly publicized, particularly in the U.S., it looks like the ongoing impact of COVID still remains the major challenge for businesses. Of course, the impact of the pandemic has also had knock-on effects on the labor market, inflation and rising energy prices,” Hughe said. “With the northern hemisphere moving into winter soon, pushing up energy use, and little sign of any end to the conflict in Ukraine, energy costs could soon become an even more major concern, particularly for European businesses. Despite some positive signs that inflation in the U.S. may be levelling off, businesses should make use of all available support and plan carefully in order to tackle these challenges and deliver on their optimistic predictions for 2023.”
Like this story? Begin each business day with news you need to know! Register now for FREE Daily E-News Broadcast and start YOUR day informed!
Separate tags with commas
Terry Mulreany
Subscriptions: 800 708 9373 x130
[email protected]
Susie Angelucci
Advertising: 484.459.3016
[email protected]
Visit our sister website for news, information, exclusive articles,
deal tables and more on the asset-based lending, factoring,
and restructuring industries.
www.abfjournal.com
Markiesha Thompson
Monitor 101 2022
Dr. Arin N. Reeves, president and managing director of Nextions, a work culture advisory firm, found herself transitioning from practicing law to focusing on diversity, equity and inclusion in the workplace more than 25 years ago, but she says the… read more
View All Articles
Markiesha Thompson
Monitor 101 2022
While the majority of diversity, equity and inclusion actions and efforts fall on organizations as a whole, there are actionable steps that people of color and other marginalized groups can utilize within the corporate workplace to ensure they are presented… read more
View All Articles
Monitor continues to provide readers, online visitors, on-the-go executives and advertisers with multimedia platform options.
View Now
Copyright © RAM Group Holdings
Gigabyte's RTX 4090 AORUS Master could fit FOUR Mini-ITX cards inside – VideoCardz.com
AORUS released one of the largest graphics cards thus far.
We have been waiting for Gigabyte to publish the full specs of the AORUS RTX 4090 Master. The company is yet to declare the GPU clocks, but full physical specs have now been confirmed.
AORUS RTX 4090 Master, Source: AORUS
For now, this card will be the flagship SKU based on Ada RTX 40 series before Gigabyte reveals its Aorus Xtreme series. But the Master is already one of the largest cards the company has ever made. The official photos show a miniscule dual-slot I/O bracket for a card that needs four slots on a motherboard.
AORUS Master is equipped with three 11 cm fans. To give you some perspective, Mini-ITX GPUs can be as small as 17 cm. With a length of 35.8 cm and width of 16.2 cm, this card could easily fit four stacked ITX cards inside, and yes, we did the math.
The volume of RTX 4090 Aorus Master is 4,383 mm³, which is five times the volume of Gigabyte’s own ITX card. Alternatively, it could fit almost ten Radeon RX 6400 low profile cards. There is probably no scientific point in these calculations, but the size gap between RTX 40 and 30 series is already staggering.
Gigabyte GPU comparison, Source: VideoCardz
Gigabyte is one of the very few companies not adding a triple- or even quad-slot I/O brackets to their cards. One might say it is just their ‘thing’. Worth noting that different AORUS cards often share the same PCB and I/O brackets. Therefore, the company might simply swap coolers to something entirely different (waterblocks/AIO kits) but still retain the same production line.

AORUS RTX 4090 Master, Source: AORUS
Source: Gigabyte
We earn an affiilate comission through Amazon Associate links.
This website relies on third-party cookies for advertisement, comments and social media integration. Check our Privacy and Cookie Policy for details.
You can contact us through our contact page or provide a tip through this page.
Copyright © 2022 · VideoCardz.com
Florida Streaming Tech Company Tivid TV Prepares for Series A Funding Round – PR Web
ORLANDO, Fla. (PRWEB) September 22, 2022
Married duo tech innovators Chris and McKenzy Bowers have set out to create economic change within the film industry with their O.T.T. streaming platform Tivid TV. Tivid TV is the first self-distribution platform that allows filmmakers and content creators to receive 100% royalties from their projects hence their tagline slogan, "Your Movie, Your Money." The forum enables viewers to rent and purchase feature films, documentaries, series, seasons, and episodes directly on your home television or any mobile device, supporting small business owners across the U.S.
The serial entrepreneurs started Tivid TV in 2019 in response to founder and film producer Christopher Michael finding a lack of distribution outlets to place or view his film without taking most of his royalties. With wife McKenzy Bowers' strong marketing and analytical background, they pushed forward to create a solution that would not only remedy the absence of the much-needed new self-distribution platform but also, in turn, create a supported system that will allow existing and freshly emerging filmmakers and content creators to assimilate, produce and distribute.
Since 2019, Tivid TV has independently raised roughly $83,000 in funding towards continuous improvements, strengthening both the front end and back end of its user interface. The Bowers introduced Tivid TV Studios as a form of funding to support Tivid TV's technological improvements, Tivid TV Studios is among one of the highest-rated Florida production movie studios listed on Peerspace that boasts prefabricated sets, including the only private jet set in Florida. The studio is located in the heart of Central Florida near Full Sail University. Since its opening in January Tivid TV Studios has created critical solid partnerships and alliances with other community leaders, such as the Florida Institute of Recording Sound and Technology, to strengthen the film industry and provide internships and other services of enrichment.
"We found that the film industry is essentially one that's seemingly overlooked when it comes to trades. You have trades such as barbering, cosmetology, and the likes that can be a very lucrative field due to extensive hands-on training that allows them to curate their clientele base immediately- sometimes even while they are in training; but most independent filmmakers often graduate with nowhere to go, or no way to break into the industry. Tivid TV is a 360 ° ecosystem structure, and we plan to be the intervention by connecting the dots that will allow them to learn the marketing end of film production and distribution and in turn, allow them to curate their fan base based on data and analytics. We plan to change the mindset that you need Hollywood to create a sustainable living off what you love to do by filling the gaps between independent film business and the community at the touch of a button," say owners Chris and McKenzy Bowers.
Tivid TV is gearing up to invite the public to participate in its first Kickstarter campaign in the company's history. The campaign will allow the tech company to introduce a new cloud-based platform with enhanced U.I. designs, compatibility and add advanced Geolocation Technology that will give the viewer access to see what productions were filmed in their hometown so the community can support local film business.In January, the company will start the journey of identifying series funding investors and venture capitalists that will help sustainably scale, add value and expand the markets of Tivid TV's elevated business model.
About Tivid TV
Tivid TV is a 360° evolving ecosystem where people can learn, film, distribute, and more! It is the only self-distribution platform that offers 100% royalty-based options. It can be downloaded in Google Play, Apple Store and Roku T.V. with more platform integrations to come.
Tivid TV allows young artists, filmmakers, and content creators alike to profit from projects without having to reach unattainable goals for distributor payouts. It is the intellectual property of Tivid TV Studios.
About Tivid TV Studios
Tivid TV Studios is Orlando, FL its first all-inclusive innovative, creative workspace where vision and passion meet to produce mass media production worldwide. Tivid TV Studios' services are designed to fit everyone's operational budgets from pre-production to distribution. The funding from Tivid TV Studios is recycled into the platform to provide more updates and user functionality. The second location is due to open in January in Austin, TX and will also further its partnership with F.I.R.S.T. Institute by inviting its virtual students to benefit the same as the flagship property in Orlando. As Tivid TV continues to grow, Tivid TV Studios will expand into each major city as a local film resource.
Tivid TV Studios boasts all-inclusive prefabricated standing movie sets that are designed with a future hit blockbuster in mind! They are known to introduce fresh freestanding set ideas every three months to give creators the flexibility to create different scenarios year-round. It is a one-stop shop for comprehensive pre- and post-production services. Tivid TV Studios has been previously featured in Black Enterprise Magazine for housing Florida's first and only standing private jet set.
Share article on social media or email:
View article via:
Questions about a news article you’ve read?
Reach out to the author: contact and available social following information is listed in the top-right of all news releases.
Questions about your PRWeb account or interested in learning more about our news services?
Call PRWeb:1-866-640-6397
©Copyright 1997-2015, Vocus PRW Holdings, LLC. Vocus, PRWeb, and Publicity Wire are trademarks or registered trademarks of Vocus, Inc. or Vocus PRW Holdings, LLC.
Sophisticated Studio Residences at 'A'ali'i Ward Village – Pacific Business News – The Business Journals
© 2022 American City Business Journals. All rights reserved. Use of and/or registration on any portion of this site constitutes acceptance of our User Agreement (updated January 1, 2021) and Privacy Policy and Cookie Statement (updated July 1, 2022). The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of American City Business Journals.
How to Record Audio in Linux With Audacity and Reduce Noise – BollyInside
The Best Reviews, list, tips and blogs
Hello everyone, today in this article we will show you how to record audio with Audacity and reduce noise in Linux. The audio editor Audacity is one of those open source applications that has filled a niche that apparently no one was aware of. Originally developed at Carnegie Mellon University at a time when many still thought computers were only for the office and school, and that special DSP peripherals were needed for serious multimedia work. Audacity recognized that occasionally the average computer user needed to edit audio. Ever since, the Audacity team has been providing an open source application for recording and cleaning up sound. So, without further ado, let’s get started.
Audacity is an open source audio recording and editing software, so anyone can download it for free with no restrictions on use. This software can: record live audio, cut, copy, merge or mix sounds, and edit various audio files (Ogg Vorbis, MP3, WAV or AIFF to name a few). This application of Linux distros can be integrated across disciplines and is relatively easy to use. The power of music can be used to make a career. Gone are the days of having to invest in expensive audio software. Audacity offers professional-quality audio editing and recording capabilities.
Table of Contents
Audacity is available in a wide variety of distros. It’s generally available in the main repositories.
sudo apt install audacity
sudo dnf install audacity
sudo zypper install audacity
sudo pacman -S install audacity
flatpak install flathub org.audacityteam.Audacity
sudo snap install audacity
Step 1: Once Audacity is installed, open it from the application menu or launch it from the terminal. A message similar to this will be displayed:
Step 2: It is easy to start recording by clicking the record button (the red dot). When finished, click the stop button (square icon) to finish. You also get a preview of the waveform of the recording.
Step 3: Then you can check what was recorded by clicking the playback button (green icon).
Step 4: If you do not see any waveform, it means that nothing was recorded. You probably did not set the input correctly. Make sure you have selected the correct microphone and that it is not disabled in the system settings. It can also be accessed from the Audacity interface.
Step 5: Recordings are not automatically saved as MP3 or other formats. To save the recording, you can go to File → Export and select Export as MP3 (or any other preferred format).
Step 1: There is another great feature in Audacity that you can use to reduce white noise in your recorded audio.
Step 2: The best practice is to say nothing for the first five seconds when you start recording with Audacity. This should give you the desired noise floor.
Step 3: On the waveform of the audio recording, select the part that you think is the background noise.
Step 4: With the noise part selected, go to Effects → Noise Reduction from the top menu of the file.
Step 5: A pop-up window like this will open. Click on “Get Noise Profile.”
Step 6: Now you have set up the noise profile. Now you need to use it to reduce the noise from the recording.
Step 7: Press the shortcut key Ctrl + A to select the entire recording. You can also select a part of it: the noise will be reduced only from the selected part.
Step 8: With the audio track selected, go to Effect → Noise Reduction again.
Step 9: This time do not click on “Get Noise Profile.” This time you should be able to press the OK button.
Step 10: Press the OK button to apply the noise reduction effect to the recording, which is reflected on the waveform.
Step 11: Now the recorded audio will have less noise than before. You can fine-tune the noise filtering by selecting the noise reduction effect. To schematize:
We hope you enjoy our article on How to record audio with Audacity and reduce noise in Linux. Audacity can manipulate the speed, pitch and tempo, fad in and out, export the clip to various formats including MP3, add new tracks to the same clip, making it easy to insert background music or sound effects, which can then be edited independently of the main track, edit WAV, AIFF, FLAC, MP2, MP3 or Ogg Vorbis (OGG) audio files. If you like our article, please share it with others.
I hope you understand this article, How to Record Audio in Linux With Audacity and Reduce Noise.
© Tofido Publishing Media Network Limited.
Bollyinside provides you the latest Guides, Tech Tips and tutorials. Which you find here: So never forget to check our Bollyinside Blogs, for technology computer mobile guides and Tips, Top lists, best 10, and bussiness guides.
Bollyinside is part of Tofido ltd, an international media group and leading digital publisher.
Making Music Is Not My Passion But Profession Too – Hindustan Metro
Sonu Makan A Successful Music Director From New Delhi, India Spent his initial days by visiting music academies , studios for recording, making a band and performing in fests and farewell throughout college days but now is successfully running his own Music Studio And Academy for Around 5 years.
Sonu was born in Delhi at Lady Hardinge Hospital Delhi
His ancestors originally belonged to Punjab , Ambala And Then Moved To Delhi For work.
He attended Adarsh Public School Vikas Puri New Delhi
He was involved in his school and college programs and several local talent shows from a very young age. For graduation , He attended Dronacharya College Of Engineering For Btech In Computer Science From 2011 -2015 , Further He went To Mumbai To Complete Sound Engineering Course From ZIMA (Zee Institue For Media And Arts) to pursue his musical career His mother and father wanted him to be a engineer, but he was passionate about music and wanted to be recognised in his field all over the world.
In his Journey , he has made Around 500 songs in 5 years and gave back to back content on his youtube channel SM Music Records by Completing 100 videos on his channel of talented singers , rappers and musicians all over india
And others on individual artist channel and music labels .
Notiably He Has Sung Over 15 -20 songs which includes his original songs as well as cover song having lakhs of views on video His First Hit Maine Socha Na tha Won Him Radio Mirchi Nomination And Vivo Not So Filmy Contest Apart From That Valentine Day Which Garneld 5 lakh plus views on youtube .Sun Meri Soniye , Recently Launced Song Tu Hi Tu Hai Recived Lakhs Of Views
He Aims For 1 Million Views Now And Having Ready 10 -15 songs which will be releasing in coming year .
Apart From Being A Singer And Music Director He Is Teaching Students Music Production And Sound Engineering To New Aspirants Of Music who want to be a music director and pursue music as profession .
Being An Engineer , Singer , Lyrics Writer , Music Director , Mix Master Engineer Now A Teacher He Lives Music Throughtout the Day .He Believes” Its Never Too Late To Wake Up For Ur Dreams”and “Life Seems Easy When Your Passion Becomes Your Profession “
He Aims To Sing For Bollywood One Day And Produce Music For Hindi & Punjabi Music Industry.
We wish Him All the Best for his upcoming journey.
https://youtu.be/OiQ_0nMcx7c
Hindustan Metro provides latest news from India and around the world. Get breaking news alerts from India and follow today’s live news updates in field of politics, sports, entertainment etc.
Contact us: [email protected]
© 2022 Hindustan Metro | Designed by Navjot Thind & Online Waale Media Group
YG Entertainment, agency for Blackpink & Big Bang, holding K-pop auditions in S'pore for those between 10 & 19 – Mothership.sg
Search
Search
News
Covid-19
Lifestyle
Lifestyle News
Hot Deals
Trending
Drama
Things To Eat
Things To Do
Stories Of Us
Celebrity
Heartwarming
Travel
Videos
Abroad
Weekend
Environment
+ More
Parliament
Perspectives
History
GE2020
CareersSearch
News
Covid-19
Lifestyle
Lifestyle News
Hot Deals
Trending
Drama
Things To Eat
Things To Do
Stories Of Us
Celebrity
Heartwarming
Travel
Videos
Abroad
Weekend
Environment
+ More
Parliament
Perspectives
History
GE2020
CareersSearch
← Back
Audition.
|
September 22, 2022, 01:06 PM
Follow us on Telegram for the latest updates: https://t.me/mothershipsg
Follow us on Telegram for the latest updates: https://t.me/mothershipsg
Are you between 10 and 19 years old and want to be a K-pop idol? This might be your chance.
YG Entertainment, a South Korean multinational entertainment agency, are having auditions between Nov. 8 and 11, and the second round on Nov. 25 and 26 in Singapore.
Application
Those interested, and born between the years 2003 and 2012, are able to apply from now to Oct. 23.
In the application form, they will need to fill in personal details such as their name, age, and even their height and weight.
They also have to send in a picture of themselves. Then, they’ll have to choose one audition category – vocal, rap or dance.
Applicants can apply via this .
The entertainment company will send a confirmation e-mail on Nov. 1 to let applicants know the time and date of the first round audition.
View this post on Instagram
A post shared by The Official YG AUDITION (@ygaudition)
The audition
The auditions will be a minute long and take place at Orchard Central Mall, level 10.
Singers and rappers will perform a song within a minute, without any background music.
Dancers will also perform for a minute and will need to bring their own phones to play the music to dance to.YG Entertainment
YG Entertainment was established in 1996.
The company operates as a record label, talent agency, music production company, event management, concert production company, and music publishing house.
The agency manages popular K-pop groups BLACKPINK, BIGBANG, and iKON, amongst others.
Top image via ygaudition and BLACKPINK IG.
If you like what you read, follow us on Facebook, Instagram, Twitter and Telegram to get the latest updates.
Eight out of nine of his air-cons will be moved to his new place.
September 22, 2022, 12:40 PM
Expect to see discounts for brands like SK-II, Kiehl’s, Lamer and more.
September 22, 2022, 12:02 PM
Whee.
September 22, 2022, 11:10 AM
According to him, it wasn't a shotgun wedding.
September 21, 2022, 10:39 PM
The accused was allegedly caught by one of his wives, who found him raping their 15-year-old daughter at their home in Malaysia.
September 21, 2022, 08:57 PM
No such thing as forever friends in international relations.
September 21, 2022, 07:28 PM
Nice.
September 21, 2022, 07:15 PM
He is married to a former Victoria's Secret angel.
September 21, 2022, 07:01 PM
Digging their heels.
September 21, 2022, 06:44 PM
It is closed until Oct. 4, 2022.
September 21, 2022, 06:30 PM
About | Advertise with us | Contact us | We Are Hiring | Privacy policy
Copyright © 2020 Mothership. All rights reserved.Master King's Fall changes – Destiny 2 – Shacknews
New to Shacknews? Signup for a Free Account
Already have an account? Login Now
Every change that is in Destiny 2’s Master King’s Fall raid, including new Champions and shields.
Master King’s Fall has arrived in Destiny 2 and it’s got a few significant changes made to the enemies when contrasted to the normal version. Players that are preparing to tackle this new difficulty should make note of the Master King’s Fall changes, equip their fireteam correctly, and prepare for quite a challenge.
Before you dive into Master King’s Fall, ensure you know how each encounter works. We’ve got our King’s Fall raid guide to assist you as well as a guide for each encounter’s Challenge in our Destiny 2 Strategy Guide. The following table is a cheat sheet of each encounter so you can see at a glance what to expect. More information is found by clicking an encounter or scrolling down.
The Master King’s Fall is the new difficulty level for the iconic raid. As a rule, a Master raid’s recommended Power level is set at +20 points higher than the season’s Pinnacle level. During Season of Plunder, the Pinnacle level is 1580 meaning the Master King’s Fall is at 1600 Power.
In order to stand a chance at surviving and completing the challenges, players should aim to be at Pinnacle Power and have their Artifact Power level in the teens.
Note that only one Challenge will be available each week. However, all the Challenges will be available at the same time when King’s Fall enters the featured raid rotation.
While the players holding the center can slack off in Normal mode, they will need to be more active in helping the players on the wings secure the relics. The Taken Phalanx and Acolytes that spawn are no joke. Basically, even if it comes at the cost of dying, protect the relic runners.
Add-clear weapons are somewhat important here. Thunderlord will tear through groups, as will Gjallarhorn. Remember you need something to burst down the Blight barriers.
The Annihilator Totems section, specifically the Totems Challenge, will be a massive hurdle for a lot of players. Instead of focusing on getting as many Deathsinger’s Power as possible, the goal is to clear every single enemy as quickly as you can. It’s imperative not to get overrun.
Unstoppable Ogres will be the main stopping point. Wait until they are fully out of the ground before stunning them. Once stunned, Gjallarhorn, Xenophage, or powerful grenades (Fusion, Storm, etc) will make short work of them. Shotguns work well to knock down the Blightguards while any weapon with Incandescent will help clear groups of foes.
Keep the rotations tight. Try to keep both sides working at the same pace. If one side gets quicker, it can throw the other side off, causing delays and potentially deaths.
There are a lot of Champions and Boss-style enemies in the Warpriest fight. For this reason, Aeons is an absolute blessing. Have at least two players using Aeons to generate more Heavy ammo than you will know what to do with. The main challenge will be dealing enough damage to the Warpriest – anticipate taking all four phases.
Weapon choice will be whatever is meta within the season. During Season of Plunder, Linear Fusion Rifles remain a great choice. Similarly, Arbalest will help with the Barrier Champions. Whoever is using Divinity can go around stunning one Overload Champion at a time.
Not much changes with the Golgoroth fight, just note that the enemies hit far harder. You may need to linger around the entrance and let the enemies come to you. Use Finishers with Aeons on the Barrier Champions for easy Heavy ammo drops.
The single Hive Knight that mans the platforms is now a Barrier Knight, which at least means you have a way to get more Heavy ammo. Stun it and jump up to the plate while you defeat it to avoid wasting any time.
Weapons-wise, Gjallarhorn, a bunch of Legendary Rocket Launchers, Divinity, and a Well of Radiance remains the go-to strategy.
The addition of Overload Champions to the Oryx fight might actually make it easier in some regards thanks to Aeons. You will now have a guaranteed way to get more Heavy ammo. Keep in mind that if Oryx summons bombs instead of the thunderdome, you’ll need to run as killing these Champions in a timely fashion is unlikely to happen.
The weapons you use to defeat Oryx will be similar, if not exactly the same, as the ones you used to defeat the Warpriest. Remember to scoop up Heavy for the final stand.
Master King’s Fall offers Destiny 2 players a shot at some neat Harrowed weapons and the Kingslayer Title. Before you dive in, ensure your team’s Power is at the optimal level and that you’re familiar with the Master King’s Fall changes. Go in prepared and expect a challenge and you should claim victory. Stop by the Shacknews Destiny 2 Strategy Guide for more help with endgame content.
Hailing from the land down under, Sam Chandler brings a bit of the southern hemisphere flair to his work. After bouncing round a few universities, securing a bachelor degree, and entering the video game industry, he’s found his new family here at Shacknews as a Guides Editor. There’s nothing he loves more than crafting a guide that will help someone. If you need help with a guide, or notice something not quite right, you can Tweet him: @SamuelChandler
Sam Chandler posted a new article, Master King’s Fall changes – Destiny 2Visioning input sought at Westfield Master Plan workshop Nov. 2 – MassLive.com
WESTFIELD — All are invited to a visioning workshop by the Westfield Master Plan Committee from 6 to 8 p.m. Wednesday, Nov. 2, in the Westfield Middle School cafeteria.
The workshop will be facilitated by the Master Plan Committee, chaired by Jay Ducharme, and Weston & Sampson Associates, which is helping to guide the process. The evening will include a discussion of Westfield’s strengths and weaknesses, and seek to uncover a shared vision for the city’s future direction. Specific action steps to take will also be discussed.
The committee also put out a survey to the public over the summer containing a lot of the areas that will be discussed in the visioning workshop. More than 200 survey responses have been received, but more responses are wanted.
Note to readers: if you purchase something through one of our affiliate links we may earn a commission.
Registration on or use of this site constitutes acceptance of our User Agreement, Privacy Policy and Cookie Statement, and Your California Privacy Rights (User Agreement updated 1/1/21. Privacy Policy and Cookie Statement updated 7/1/2022).
Cookie Settings
© 2022 Advance Local Media LLC. All rights reserved (About Us).
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Advance Local.
Community Rules apply to all content you upload or otherwise submit to this site.Ad Choices
‘Carmen’ Review: You Will Live in Bliss – The New York Times
Advertisement
Supported by
Critic’s Pick
After her priest brother dies, a woman masquerades as a village’s irreverent new spiritual leader in this delightful drama.
Send any friend a story
As a subscriber, you have 10 gift articles to give each month. Anyone can read what you share.
When you purchase a ticket for an independently reviewed film through our site, we earn an affiliate commission.
Thanks to a lineage from Bizet to Beyoncé, Carmen is a name associated with temptation. The new drama “Carmen” is not based on the famous opera and tells an original story, but its heroine calls her community toward earthly delights nonetheless.
Carmen (Natascha McElhone) is the sister of a priest in rural Malta, the kind of holy man who chastises parishioners for singing too beautifully in church, and her joyless lot in life has been to act as his housekeeper. When her brother dies, Carmen is left without a home, money or a profession. But she’s free to live without the imposition of church authority.
Carmen steals the keys to the vacant church and begins to masquerade as the village’s new priest. She doesn’t say Mass, but from the privacy of the confession booth she happily advises long-suffering wives on how to rid themselves of their husbands. Donations to the church explode, and Carmen repurposes the funds liberally: She buys herself a makeover and sends a neighbor to Rome to pursue her dreams. The only danger to her good works is the possibility that a pious churchgoer might expose Carmen’s deception and reimpose rules that weren’t working before she took over.
There is a fable-like quality to this film, which plays a little loose with the details of the plot. It doesn’t quite make sense that in such a small village, Carmen’s schemes go largely unnoticed. But in a movie where the central theme is a divorce from orthodoxy, the writer and director Valerie Buhagiar makes the wise decision to orient her film toward what’s pleasurable rather than what’s logical. The Maltese countryside sparkles in the sunlight, and McElhone delights with a charming and slightly loopy performance as the irreverent spiritual leader.
Carmen
Not rated. Running time: 1 hour 27 minutes. In theaters and available to rent or buy on Apple TV, Google Play and other streaming platforms and pay TV operators.
AdvertisementSHAREHOLDER INVESTIGATION: Halper Sadeh LLC Investigates GMTX, SMBC, EQ, MTCR – Gemini Therapeutics (NASD – Benzinga
NEW YORK, Sept. 22, 2022 (GLOBE NEWSWIRE) — Halper Sadeh LLC, an investor rights law firm, is investigating the following companies for potential violations of the federal securities laws and/or breaches of fiduciary duties to shareholders relating to:
Gemini Therapeutics, Inc. GMTX's merger with Disc Medicine, Inc. Pre-merger Gemini shareholders are expected to own approximately 28% of the combined company. If you are a Gemini shareholder, click here to learn more about your rights and options.
Southern Missouri Bancorp, Inc. SMBC's merger with Citizens Bancshares Co. Under the terms of the merger agreement, Citizens shareholders will have the right to elect either a fixed exchange ratio of 1.1448 shares of Southern Missouri common stock or a cash payment of $53.50 for each Citizens share. If you are a Southern Missouri shareholder, click here to learn more about your rights and options.
Equillium, Inc. EQ's merger with Metacrine Inc. If you are an Equillium shareholder, click here to learn more about your rights and options.
Metacrine Inc. MTCR's merger with Equillium, Inc. If you are a Metacrine shareholder, click here to learn more about your rights and options.Shareholders are encouraged to contact the firm free of charge to discuss their legal rights and options. Please call Daniel Sadeh or Zachary Halper at (212) 763-0060 or email [email protected] or [email protected].
Halper Sadeh LLC represents investors all over the world who have fallen victim to securities fraud and corporate misconduct. Our attorneys have been instrumental in implementing corporate reforms and recovering millions of dollars on behalf of defrauded investors.
Attorney Advertising. Prior results do not guarantee a similar outcome.
Contact Information:
Halper Sadeh LLC
Daniel Sadeh, Esq.
Zachary Halper, Esq.
(212) 763-0060
[email protected]
[email protected]
https://www.halpersadeh.com
© 2022 Benzinga.com. Benzinga does not provide investment advice. All rights reserved.BBC Studios and BBC Music presents Later… with Jools Holland at 30 – BBC
Celebrating a landmark birthday, BBC Two’s Later… with Jools Holland at 30 is to be recorded before 3,000 fans at one of Britain’s most famous concert venues, on Wednesday 5 October.
Thirty years, 60 series and over 450 episodes since it all began back on 8 October 1992, Later… with Jools Holland at 30 shifts to the iconic Eventim Apollo in West London for one night only, to be broadcast later this year.
The special line-up, which will be kept under wraps until the night, will include a typically exciting blend of artists from different eras and musical worlds who have appeared on the show over the years – as well as one or two newer acts in line with the tradition of the show. They all will give us an unforgettable evening of live performances, interviews and musical magic, all steered as ever by Jools himself.
Jools says: “It’s unbelievable that this year sees my show reach its 30th birthday. It’s a testament to the great power of music that we are still going strong, and are now the longest-running international music show on earth. I’m delighted and honoured that we’re going to celebrate this monumental milestone with a special one off event in the fabulous Eventim Apollo, Hammersmith the scene of so many legendary musical moments.”
Lorna Clarke, Director of Music, BBC, says: “The BBC’s commitment to live music remains strong and in a year which has seen the return of live music performance, I’m hugely proud that after 30 incredible years, Later…with Jools Holland is still busy unearthing the superstars of tomorrow as well as featuring some of the world’s best loved musicians, all to entertain the music-loving BBC viewers at home.”
Alison Howe, Executive Producer says: “Later… reaching its 30th birthday is testament to Jools, all the incredible musicians who have supported us and our crew, whose love and commitment of showcasing live music for the audience is unmatched. With our upcoming series, this special show and our 30th Annual Hootenanny, it’s going to be an incredible three months of live music.”
A new series of Later… with Jools Holland, kicks off on 1 October on BBC Two and BBC iPlayer. Guests this series will include The 1975, Self Esteem, Victoria Canal, Ural Thomas, Loyle Carner, Marcus Mumford, The Big Moon, Burna Boy, PVA and Phoenix.
Among the big names who made their UK television debuts on Later include Adele, Amy Winehouse, Alicia Keys, Arctic Monkeys, Katy Perry, Kanye West, Kings Of Leon, Mary J Blige, Metallica, Norah Jones, Stormzy, Taylor Swift and The Weeknd, plus many more.
Other recent highlights on BBC Music TV include the Spring 2022 series of Later…with Jools Holland, with performances from Liam Gallagher, Cat Burns, Charlotte Adigéry & Bolis Pupul, Confidence Man, Jessie Buckley & Bernard Butler, Joe Bonamassa, Obongjayar, Oumou Sangaré, Poppy Ajudha, Sinead O’Brien, Warmduscher and Wet Leg; Glastonbury 2022 broadcast across all channels; BBC Two and iPlayer’s coverage of My Life As A Rolling Stone; the world’s biggest classical music festival, The Proms; award-winning artists from the Reading Festival, including highlight performances from Dave and Arctic Monkeys on BBC One; BBC One and BBC Three first-time broadcasts of the Wireless Festival; plus Reel Stories featuring Robbie Williams (to be broadcast in October), Kylie, Noel Gallagher, Rod Stewart, Sting and Dave Grohl.
Also, 2022 has seen BBC One and BBC iPlayer’s coverage of Radio 1’s Big Weekend, including Harry Styles’ set on the main stage; BBC Four’s coverage of the BBC Radio 6 Music Festival in Cardiff, featuring performances from Johnny Marr, Little Simz, Pixies and IDLES.
Tickets will be on sale from Friday 23 September at 10am.
Later… with Jools Holland at 30 is commissioned by Lorna Clarke, Director of Music for the BBC. It is a BBC Studios Music production with Alison Howe, Executive Producer.
For full details, visit bbc.co.uk/later
JM7What Happened Wednesday at the U.N. General Assembly – The New York Times
What Happened Wednesday at the U.N. General Assembly The New York Times
sourcePutin has been called a 'master procrastinator' but experts say he wanted to avoid mobilizing troops 'at all costs' due to how unpopular it would be in Russia – Yahoo! Voices
Putin announced Wednesday he was calling in reserves, prompting protests in Russia.
Experts said Putin wanted to avoid the move, but also wanted to bolster his military.
The move could weaken support for Putin’s regime as Russians are exposed to the reality of the war.
Russian President Vladimir Putin’s announcement of a partial military mobilization was decried by some as too little too late, but that may be because he had desperately tried to avoid this outcome and thought he could succeed in Ukraine without it, experts said.
Putin said Wednesday he was calling up 300,000 reservists and threatened nuclear options after the Ukrainian military made major gains in recent weeks. The Russian president has found his forces short on manpower while Ukraine, on the other hand, ordered a full military mobilization within days of the invasion in February.
“He’s a master procrastinator,” Michael Kofman, a military analyst of Russia studies at the Center for Naval Analyses told Puck’s Julie Ioffe this week. “He procrastinates and procrastinates till the options go from bad to worse.”
Experts told Insider it could take weeks or months for Russia’s partial mobilization to bear fruit, as the reservists need to be trained, equipped, and deployed. They also said taking such action at this stage in the war shows things are going so poorly for Russia that Putin is anxious for something that could turn the tide.
“In hindsight, he should have done it sooner. Absolutely,” Robert English, a professor at the University of Southern California who studies Russia, the Soviet Union, and Eastern Europe, told Insider, adding that an earlier mobilization of troops wouldn’t have looked so desperate.
But, he said, Putin had thought he could succeed in Ukraine without taking this step, which comes with the risk of inspiring backlash among the Russian people.
“This is something he wanted to avoid at almost any cost. Because up until now, the war has been kind of a television war for Russians,” English said, adding that most well-off people in cities like Moscow and St. Petersburg have largely been able to tune out the war and go about normal life.
“But when you mobilize reservists — even if you target the poor, the rural, the provincial, the minorities, and still avoid the upper middle classes in the big cities — it still will touch them more directly,” he continued. “The fact that he’s resorted to that shows a certain desperation, that they’re afraid of another big Ukrainian breakthrough that could be coming in a week or two.”
If Putin was afraid of the fallout from calling up reservists, it appears to have been warranted. Since the announcement, Russians have flooded the streets in protest with chants of “no to war,” an unusual sight in the country. Around 500 people had been arrested as of Wednesday evening, according to OVD-Info, an independent monitoring group.
The outcry could ultimately threaten Putin’s place as Russia’s longtime leader, according to Simon Miles, an assistant professor at Duke University’s Sanford School of Public Policy and a historian of the Soviet Union and US-Soviet relations.
“The one kind of thing he had going for him, so to speak, was that the war was not really being visited on most Russians,” Miles told Insider, adding that Putin and his “massive state media apparatus were able to present an extremely sanitized, different version” of the war.
For one thing, Putin and Russian media had avoided even calling it a war, instead using the president’s description as a “special military operation.”
But even before the mobilization — and after Ukraine’s successful advances — Russian media recently started to veer from the consistently positive coverage of the war, and published criticism of the military fumbles and failures of leadership, Miles said.
Now, calling up people to fight who may not want to risks further weakening support for Putin’s regime.
Daniel Treisman, a professor at the University of California, Los Angeles, whose work focuses on Russian politics and economics, agreed Putin has sought to avoid mobilizing troops due to how unpopular it would be, noting the protests show it’s clear that Russians hate this development.
“That Putin would do this shows how badly he feels the need right now to change the momentum, which has been all in Ukraine’s favor,” Treisman told Insider in an email, noting it will take weeks to deploy the new units.
Treisman also noted that in addition to announcing the draft Putin introduced tougher penalties for draft dodging, suggesting he was prepared for the people to resist.
“There’s a danger that the draft will be seen to fail and undermine still further the sense that Putin is in control at home,” he said.
Read the original article on Business Insider
Russian President Vladimir Putin's push to mobilize troops against Ukraine has been met with protests on the streets of Russia.
Nearly 1,200 Russians were arrested in anti-war demonstrations in cities including Moscow and St. Petersburg, according to the independent Russian human rights group OVD-Info.
STANISLAV POHORILOV – THURSDAY, 22 SEPTEMBER 2022, 09:26 The Armed Forces of Ukraine have killed 400 Russian soldiers over the previous 24 hours, with the total number of Russia's personnel losses reaching 55,510 since the beginning of the full-scale invasion on 24 February.
Ukraine President Volodymyr Zelenskyy delivered a speech on Wednesday at the UN General Assembly, calling for peace and punishment against Russia.
Ukraine’s top military leadership has cancelled exemptions in the martial law regime that had previously allowed male Ukrainians registered at universities abroad to leave the country, State Border Service spokesman Andriy Demchenko told Ukrainian media outlet Liga on Sept. 22.
More than 100 public drinking water systems in Colorado found levels of "forever chemicals" in their drinking water systems that the EPA now says are unsafe. CBS Colorado explores what money is available to fix the problem, and what precautions water drinkers should take in the meantime.
Russian officials are calling up people who do not fall under the criteria of its partial military mobilization, multiple reports said.
The Russian oligarch and the crown prince met in late August to discuss the release of the prisoners, three anonymous sources told Bloomberg.
ALONA MAZURENKO – THURSDAY, 22 SEPTEMBER 2022, 22:13 President Volodymyr Zelenskyy of Ukraine has urged all Russians to take part in protests against their government if they do not want to lose more soldiers in the war with Ukraine.
KATERYNA TYSHCHENKO – THURSDAY, 22 SEPTEMBER 2022, 22:39 President Volodymyr Zelenskyy does not link the possible end of Vladimir Putin's regime in Russia with the end of the war in Ukraine. Source: Zelenskyy in an interview with the German newspaper Bild, the video was published on Zelenskyy's Telegram Quote from Zelenskyy when asked whether the war will end only when the Putin regime collapses: "I do not associate this with the end of the war.
Department of Justice is gearing up to go ahead and indict Donald Trump, criminology expert says.
Vladimir Putin is calling up 300,000 more troops and making threats about nuclear weapons. Former U.S. Ambassador to Ukraine William Taylor joins Katie Phang to discuss why Putin’s nuclear threats are an act of desperation.
OddsShark released odds for who could replace Robert Sarver as the next owner of the Phoenix Suns, and some big names are among the favorites.
U.S. companies said business perked up slightly in September largely because of an increase in new customer orders, but high inflation, ongoing shortages and rising interest rates remained a drag on their growth prospects.
STORY: Kyrylo Budanov was speaking at a news conference a day after a prisoner swap was agreed between Russia and Ukraine involving almost 300 people, including foreigners.Some of the Ukrainian POWs released by Russia were currently receiving rehabilitation in hospital in Ukraine, the country's interior minister, Denys Monastyrskyi, told the same news conference.Under the terms of the deal, which Turkey helped broker, 215 Ukrainians – most captured after the fall of the port city Mariupol – were released on Wednesday (September 21). In exchange, Ukraine sent back 55 Russians and pro-Moscow Ukrainians.Ten foreigners were also freed following mediation by Saudi Crown Prince Mohammed bin Salman.British ambassador to Ukraine, Melinda Simmons called on Russia to respect international humanitarian law in its treatment of prisoners of war.Tobias Thyberg, Swedish ambassador to Ukraine said: "You have a lot of citizens of your own who are still in Russian captivity, and we certainly will not forget that Ukraine chose at this moment to also manifest its concern for those captives who were not Ukrainian citizens. And that is something for which Sweden is exceptionally grateful."
A California man who was captured on video punching an American Airlines flight attendant in the back of the head on a flight from Mexico to Los Angeles has been arrested, federal prosecutors said.
Some draft-age Russians rushed to leave the country on Thursday to escape their country's biggest conscription drive since World War Two, as world powers at the United Nations demanded Moscow be held accountable for alleged atrocities in Ukraine. The diplomatic confrontations came a day after President Vladimir Putin launched a new mobilisation campaign for the seven-month-old war that has already killed thousands, displaced millions, pulverised cities and damaged the global economy. Surveys in Russia have suggested widespread domestic backing for Moscow's intervention in Ukraine.
Ukraine announced a high-profile prisoner swap early Thursday that culminated months of efforts to free many of the Ukrainian fighters who defended a steel plant in Mariupol during a long Russian siege. In exchange, Ukraine gave up an ally of Russian President Vladimir Putin. President Volodymr Zelenskky said his government had won freedom from Russian custody for 215 Ukrainian and foreign citizens.
The 30-year mortgage rate is averaging at 6.29%, Freddie Mac said in its latest weekly survey on Thursday.
Still working out on the floor? Try this instead.Bending analysis of sandwich panel composite with a re-entrant lattice core using zig-zag theory | Scientific Reports – Nature.com
Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 15796 (2022)
Metrics details
The sandwich panel structures have been widely used in many industrial applications because of their high mechanical properties. The middle layer of these structures is very important factor in controlling and enhancing their mechanical performance under various loading scenarios. The re-entrant lattice configurations, are prominent candidates that can be used as the middle layer in such sandwich structures because of several reasons namely the simplicity in tuning their elastic (e.g., values of Poisson’s ratio and elastic stiffness) and plastic (e.g., high strength-to-weight ratio) properties by only adjusting the geometrical features of the constituting unit cells. Here, we investigated the response of a three-layered sandwich plate with a re-entrant core lattice under flexural bending using analytical (i.e., zig-zag theory), computational (i.e., finite element) and experimental tests. We also analyzed the effects of different geometrical parameters (e.g., angle, thicknesses, and length to the height ratio of unit cells) of re-entrant lattice structures on the overall mechanical behavior of sandwich structures. We found that the core structures with auxetic behavior (i.e., negative Poisson’s ratio) resulted in a higher bending strength and a minimum out-of-plane shear stress as compared to those with conventional lattices. Our results can pave way in designing advanced engineered sandwich structures with architected core lattices for aerospace and biomedical applications.
The sandwich structures have been widely used in many industries such as machine and sport equipment designs, marine, aerospace, and biomedical engineering due to their high strength and low weight properties. The re-entrant lattice structures are among the potential candidates to be considered as a core layer in such composite structures because of their excellent energy absorption capacity and high strength to weight properties1,2,3. Significant efforts have been made in the past to design lightweight sandwich structures with re-entrant lattices to obtain even more improved mechanical properties. Examples of those structures are high-pressure loading in ship hulls, and shock absorbers in automobiles4,5. What makes the re-entrant lattice structures extremely popular, unique and suitable for the sandwich panel designs is the ability to tune their elastic mechanical properties (i.e., elastic stiffness and Poisson’s ratio) independently by simply adjusting their microstructural geometries at the smaller scale. Among these interesting properties is the auxetic behavior (or negative Poisson’s ratio) which refers to a transverse expansion of the lattice structures, when they are longitudinally stretched6. This unusual behavior originates from the microstructural design of their constituting unit cells7,8,9.
After initial studies by Lakes about the production of auxetic foams, significant efforts have been made to design porous structures with negative values of Poisson’s ratio10,11. Towards this aim, several geometrical designs have been proposed such as chiral, semi-rigid and rigid rotating unit cells12 all of which exhibiting auxetic behavior. The advent of additive manufacturing (AM, also known as 3D printing) techniques has also helped the realization of these 2D or 3D auxetic structures13.
The auxetic behavior offers unique mechanical properties. For example, Lakes and Elms14 showed that the auxetic foams have higher yield strengths, higher energy absorption capacity against the impact loading, and lower stiffness properties as compared to the conventional foams. As far as the dynamic mechanical properties of the auxetic foams are concerned, they showed higher resilience under dynamic crushing loads and higher elongation capacity under the pure stretching15. In addition, the use of auxetic fibers as reinforcement in composites would result in enhancing their mechanical properties16 and their resistance to the damage originated from the fiber elongations17.
It has also been shown that the use of re-entrant auxetic structure as a core in curved composite structures could increase their out-of-plane properties, including flexural stiffness and strength18. Using a delamination model, it has also been observed that the auxetic core could increase the fracture strength of the composite plates19. The composites with auxetic fibers could also prevent the propagation of cracks in comparison to those with conventional fibers20.
Zhang et al.21 simulated the dynamic crashing behaviors of re-entrant cellular structures. They found that the stress and energy absorption could be improved by increasing the angle of auxetic unit cells resulting in a lattice with a more negative values of Poisson’s ratio. They also suggested that such auxetic sandwich panels could be used as a protective structure against the high-strain rate impact loads. Imbalzano et al.22 also reported that auxetic composite panels could dissipate more energy (i.e., two times higher) via a plastic deformation and could reduce up to 70% of the back facet’s maximum velocity compared to a single-layer panel.
Recently, the numerical and experimental investigations of the auxetic core sandwich structures have gained a lot of attentions. These studies have highlighted the ways on how to improve the mechanical properties of those sandwich structures. As an example, considering sufficiently thick auxetic layer as a core in a sandwich panel, could lead to a higher effective Young’s modulus than the Young’s modulus of its constituting stiffest layer23. Also, using optimization algorithms, the bending performance of sandwich beams24 or tubular lattices25 with auxetic cores could be improved. There are also other studies concerning mechanical testing of auxetic core sandwich structures under more complex loading scenarios. Examples are compressive testing of concrete composites with auxetic cores26, sandwich panels in a blast loading27, flexural bending28, and low-velocity impact resistance tests29, and nonlinear bending analysis of sandwich plates with functionally graded auxetic cores30.
Since the computational simulations and experimental evaluations of such structures are often very time-consuming and expensive, there is a need for the development of theoretical approaches that can effectively and accurately provide the required information for designing a core auxetic sandwich structure under arbitrary loading conditions in a reasonable time. The current analytical approaches, however, suffer from many limitations. These theories in particular, are not accurate enough for predicting the behavior of relatively thick composites and for analyzing composites that are composed of several materials with highly dissimilar elastic properties.
Since these analytical models depend on the applied loads and boundary conditions, here, we focus on the bending properties of sandwich panels with an auxetic core. The equivalent single-layer theories for such analyses fall short of correctly predicting the shear and axial stresses in highly heterogeneous lay-ups in moderately thick sandwich composites. Moreover, the number of kinematic variables (e.g., displacement, velocity etc.) in some theories such as layer-wise theories, highly depends on the number of layers. This means that the kinematic fields of each layer can independently be described while satisfying certain physical continuity constraints. Therefore, this will end up in considering a great number of variables in the model, making such approaches computationally very expensive. To overcome these limitations, we propose a method based on the zig-zag theory that is a particular sub-class of layer-wise theory. This theory enforces the continuity of the shear stresses across the entire laminate thickness by assuming a zig-zag pattern for the in-plane displacements. The zig-zag theory, therefore, gives the same number of kinematic variables regardless of the number of layers in a laminate.
In order to show the capacity of our approach in predicting the behavior of sandwich panels with re-entrant cores under bending loading, we compared our results with the classical theories (i.e., 3D elasticity (Pagano), first-order shear deformation theory (FSDT)) of plates and validated our approach by computational models (i.e., finite element) and experimental data (i.e., three-point bending of the 3D printed sandwich panels). For this purpose, we, first, derived the displacement relations based on the zig-zag theory, and then, obtained the governing equations using Hamilton’s principle and solved them by the Galerkin method. Our results suggested a powerful tool for designing the corresponding geometrical parameters of a sandwich panel with an auxetic core helping in finding structures with improved mechanical properties.
Let us consider a three-layer sandwich plate (Fig. 1). The geometric parameters of this structure are: top layer, ({h}_{t}), middle layer, ({h}_{c}), and, bottom layer, ({h}_{b}) thicknesses. We assume that the structural core is composed of a re-entrant lattice structure. This structure is composed of unit cells that are arranged in an ordered manner next to each other. By changing the geometrical parameters of the re-entrant structure their mechanical properties (i.e., values of Poisson’s ratio and elastic stiffness) can be changed. The geometrical parameters of a unit cell, as shown in Fig. 1, are angle (θ), length (h), height (L), and strut thickness (t).
Three-layered sandwich plate with a re-entrant lattice structure as a core.
The zig-zag theory provides a very accurate prediction of the stress and strain behaviors of moderately thick layered composite structures. The structure displacement in a zig-zag theory consists of two parts. The first part shows the behavior of the whole sandwich plate, and the second part considers the behavior between the layers so that to satisfy the shear stress continuity (or so-called zig-zag functions). Also, the zig-zag function vanishes on the outer surfaces of the laminated plate instead of within a given layer. As a result, the zig-zag function provides a contribution from each layer to the overall deformation of the cross-section. This important difference ensures a more physically realistic distribution for the zig-zag function instead of other zig-zag functions. The present refined zig-zag model does not enforce the continuity of the transverse shear stresses along the intermediate layers. The displacement field based on the zig-zag theory can, therefore, be written as follows31.
In Eq. (1), k = b, c, t represents the bottom, middle, and top layer, respectively. The displacement field of the midplane along the Cartesian axis (x,y,z) is (u,v,w), and in-plane bending rotation about the (x,y) axis is ({uptheta }_{x}) and ({uptheta }_{y}). ({psi }_{x}) and ({psi }_{y}) are the spatial amplitudes of the zig-zag rotation, while ({phi }_{x}^{k}left(zright)) and ({phi }_{y}^{k}left(zright)), represent zig-zag functions.
The zig-zag amplitudes are vector functions of the actual response of the plate under the applied loading. They provide the proper scaling of the zig-zag functions, thus controlling the total zig-zag contribution to the in-plane displacements. The shear strain along the thickness of the plate consists of two parts. The first part is the uniform shear angle through the total laminate thickness, and the second part is the piecewise constant functions that are uniform through the thickness of each individual layer. According to these piecewise constant functions, the zig-zag function for each layer can be written as:
In Eq. (2),({c}_{11}^{k}) and ({c}_{22}^{k}) are the elastic constants of each layer, and h is the total thickness of the plate. Also, ({G}_{x}) and ({G}_{y}) are weighted-average transverse-shear stiffness coefficients, which are represented as31:
The two zig-zag amplitude functions (Eq. (3)) and the remaining five kinematic variables (Eq. (2)) of first-order shear deformation theory constitute a set of seven kinematic variables associated with this refined zig-zag plate theory. By assuming linear strain relations, the strain field in the Cartesian coordinate system with considering the zig-zag theory can be obtained as:
where ({varepsilon }_{yy}) and ({varepsilon }_{xx}) are normal strains and ({gamma }_{yz},{ gamma }_{xz}) and ({gamma }_{xy}) are shear strains.
Using Hooke’s law and considering the zig-zag theory, the stress-strain relationships for an orthotropic plate with a re-entrant lattice structure can be obtained by Eq. (5)32 where ({c}_{ij}) is the elastic constants of the stress-strain matrix.
By considering orthotropic material models, the elastic constants can be calculated as:
where ({G}_{ij}^{k})، ({E}_{ij}^{k}) and ({v}_{ij}^{k}) are shear modulus, Young’s modulus, and Poisson’s ratios in different directions, respectively. These coefficients are equal for the isotopic layers in all directions. Also, for a re-entrant lattice core, as shown in Fig. 1, these properties can be re-written as33.
By applying the Hamilton principle to the equation of motions of sandwich plate with a re-entrant lattice core, the governing equations of the structure can be obtained. The Hamilton principle is written as:
where δ represents the variation operator, U represents the strain potential energy, and W is the work done by the external forces. The total strain potential energy is obtained using Eq. (9), where A is the midplane domain.
By assuming uniform applied load (p) in the z-direction, the work of an external force can be obtained using:
By replacing Eqs. (4) and (5) in Eq. (9) and also replacing Eqs. (9) and (10) in Eq. (8) and integrating through the thickness of the plate, Eq. (8) can be rewritten as:
The (phi) indices denote to the zig-zag functions, ({N}_{ij}) and ({Q}_{iz}) are in-plane and out-of-plane forces, and ({M}_{ij}) represent bending moments which can be calculated as follow:
By applying integration by parts to Eq. (12) and calculating variation coefficients, the governing equations of the sandwich panel can be obtained in the form of Eq. (13).
We used Galerkin method to solve the differential governing equation system for a simply supported sandwich plate. Assuming a quasi-static condition, the unknown functions are considered as Eq. (14).
({u}_{m,n}), ({v}_{m,n}), ({w}_{m,n}),({{uptheta }_{mathrm{x}}}_{mathrm{m}text{,n}}), ({{uptheta }_{mathrm{y}}}_{mathrm{m}text{,n}}), ({{uppsi }_{mathrm{x}}}_{mathrm{m}text{,n}}) and ({{uppsi }_{mathrm{y}}}_{mathrm{m}text{,n}}) are unknown constants that can be obtained by minimizing the error. (overline{overline{u}} left( {x{text{,y}}} right)), (overline{overline{v}} left( {x{text{,y}}} right)), (overline{overline{w}} left( {x{text{,y}}} right)), (overline{overline{{{uptheta }_{x} }}} left( {x{text{,y}}} right)), (overline{overline{{{uptheta }_{y} }}} left( {x{text{,y}}} right)), (overline{overline{{psi_{x} }}} left( {x{text{,y}}} right)) and (overline{overline{{ psi_{y} }}} left( {x{text{,y}}} right)) are test functions that should satisfy the minimum necessary boundary conditions. For the simply supported boundary condition, the test functions can be recalculated in the form of:
A system of algebraic equations is obtained by substituting Eq. (14) to governing equations, which can lead to achieving the unknown coefficients in Eq. (14).
We used finite element modelling (FEM) approaches to computationally simulate the flexural bending of simply supported sandwich panels with a re-entrant lattice structure as a core. The analyses were performed in a commercial finite element code (i.e., Abaqus ver 6.12.1). A three-dimensional hexahedral solid element with a reduced integration (C3D8R) was used for modelling the top and bottom layers and a linear tetrahedron element (C3D4) was used to model the middle (re-entrant) lattice structure. We performed a mesh sensitivity analysis to check the mesh convergency and concluded that the displacement results converged by an element size equal to the minimum thickness among three layers. The sandwich plate was loaded using a sinusoidal loading function while a simply supported boundary condition was considered on four edges. A linear elastic mechanical behavior was considered as the material model which was assigned to all layers. No contact was defined between layers and they were tied together.
We used 3D printing techniques to create our prototypes (i.e., sandwich plate with auxetic core printed three times) and the corresponding custom-made experimental setup to apply similar flexural bending (uniform load p along the z-direction) and boundary conditions (i.e., simply support) assumed in our analytical approach (Fig. 1).
The 3D printed sandwich panel, here, was composed of two skins (top and bottom) and a re-entrant lattice core whose dimensions are listed in Table 1 and were fabricated using a Ultimaker 3 (Italy) 3D printing machine that uses Fused Deposition Modeling (FDM) technique for its processes. We 3D printed the bottom plate and the core auxetic lattice structures together while we 3D printed the top layer separately. This helped to avoid any complexity for the support removal processes in case the entire structure was supposed to be printed at once. Once two separate parts were 3D printed, they were glued together using a super glue. We used polylactic acid (PLA) for printing these components and set the infill density to the maximum (i.e., 100%) to prevent any local defects while printing.
The custom-made gripping system mimicked the similar simply support boundary conditions assumed in our analytical models. This means that the gripping system disabled the displacement of the plate in the x- and y- directions along its edges while allowing the free-rotation of those edges about the x- and y- axes. This has been performed by considering a fillet with a radius of r = h/2 at the four edges of the gripping system (Fig. 2). This gripping system also ensured that the applied load was fully transferred from the testing machine to the plate, and it was in line with the center line of the plate (Fig. 2). We used polyjet 3D printing technique (ObjetJ735 Connex3, Stratasys® Ltd., USA) with a hard commercial polymer (i.e., Vero family) for printing the gripping system.
The schematic of the 3D printed custom-made gripping system and their assemblage with the 3D printed sandwich panel with an auxetic core.
We performed displacement-control quasi-static compression tests using a mechanical test benchmark (Lloyd LR, load cell = 100 N), and collected the force and displacement from the machine at the sampling rate of 20 Hz.
The numerical study of the proposed sandwich structure is presented in this section. We assumed that the top and bottom layers were made of carbon epoxy, and the re-entrant core lattice structure was made of polymer. The mechanical properties of the materials used in this study are shown in Table 2. Also, the dimensionless relations of displacement and stress field results are given in Table 3.
The maximum vertical dimensionless displacement for the simply supported plate with a uniform loading is compared with those obtained from different methods (Table 4). There is a good agreement between the presented theory, FEM, and experimental test.
We compared the vertical displacement of the refined zig-zag theory (RZT) with the 3D elasticity theory (Pagano), the first-order shear deformation theory (FSDT), and FEM results (see Fig. 3). According to the displacement plots of a thick sandwich plate, the first-order shear deformation theory had the maximum difference with the elasticity solution. The refined zig-zag theory, however, predicted the highly accurate result. Furthermore, we compared the out-of-plane shear stress and the in-plane normal stress of different theories in which the zig-zag theory reached more accurate results than FSDT (Fig. 4).
The comparison of the normalized vertical deformation calculated using different theories at y = b/2.
The variation of (a) shear stress, and (b) normal stress, along the thickness of the sandwich panel calculated using different theories.
We further analyzed the effects of the geometrical parameters of the unit cells of the re-entrant core on the overall mechanical properties of the sandwich plate. The angle of the unit cells is the most important geometrical parameter in the design of re-entrant lattice structures34,35,36. We, therefore, calculated the effects of the angle of unit cells as well as the out-of-plane thickness of the core layer on the overall deflection of the plate (Fig. 5). The maximum dimensionless deflection decreased by increasing the thickness of the intermediate layer. The relative flexural strength increased for a thicker core layer and when (frac{{h}_{c}}{h}=1) (i.e., when there is a single re-entrant layer). The sandwich panel with an auxetic unit cell (i.e., (theta =70^circ)), had the lowest displacement (Fig. 5). This indicates that the flexural strength of the auxetic core is more than the conventional one, is less effective and there in positive Poisson ratios.
The normalized maximum deflection of re-entrant lattice core with different unit cell angles and out-of-plane thicknesses.
The thickness and length-to-height ratio of an auxetic lattice core (i.e., (theta =70^circ)) influenced the maximum displacement of the sandwich plate (Fig. 6). As it can be observed, the maximum deflection of the plate increased by increasing h/l. Besides, increasing the thickness of the auxetic core reduced the porosity of the re-entrant structure, which increased the bending flexural strength of the structure.
The maximum deflection of the sandwich plate by different thicknesses and lengths of an auxetic core lattice structure.
The study of the stress field is an interesting area that can be explored by changing the geometrical parameters of the unit cells, thereby, investigating the failure modes (e.g., delamination) of the sandwich structures. The values of Poisson’s ratio have a larger effect on the out-of-plane shear stress field than normal stresses (see Fig. 7). Furthermore, this effect is not consistent in different directions since those lattices have orthotropic material properties. The other geometrical parameters such as thickness, height, and length of the re-entrant structure had a negligible effect on the stress field and, therefore, they have not been analyzed in this study.
The variation of the components of the shear stresses at different layers of sandwich panels with various re-entrant lattice cores.
Here, the bending flexural strength of a simply supported sandwich plate with a re-entrant lattice core was investigated by zig-zag theory. The presented formulation was compared with other classical theories including the 3D elasticity, first-order shear deformation theory, and FEM. We also verified our approach by comparing our results with experimental results of the 3D printed sandwich structures. Our results showed that the zig-zag theory was capable of predicting the deformation of moderately thick sandwich structures under the flexural bending loading. Moreover, the effects of the geometrical parameters of the re-entrant lattice structures on the bending behavior of the sandwich plates were analyzed. The results showed that by increasing the level of auxeticity (i. e., θ < 90), the flexural bending strength increased. Also, increasing the length-to-height ratio and decreasing the thickness of the core lattice reduced the bending flexural strength of the sandwich plate. In the end, the effect of the Poisson’s ratio on the out-of-plane shear stresses was studied which confirmed that it had the greatest effect on the shear stresses created along with the thickness of those sandwich plates. The presented formulation and conclusion can pave ways in designing and optimizing sandwich structures with a re-entrant lattice core under more complex loading conditions necessary for in the design of load-bearing structures in aerospace and biomedical engineering.
The datasets used and/or analysed during the current study available from the corresponding author on reasonable request.
Aktay, L., Johnson, A. F. & Kröplin, B. H. Numerical modeling of honeycomb core crush behavior. Eng. Fract. Mech. 75(9), 2616–2630 (2008).
Google Scholar
Gibson, L. J. & Ashby, M. F. Cellular solids: Structure and properties (Cambridge University Press, 1999).
MATH Google Scholar
Papka, S. D. & Kyriakides, S. Experiments and full-scale numerical simulations of in-plane crushing of a honeycomb. Acta Mater. 46(8), 2765–2776 (1998).
ADS CAS MATH Google Scholar
Evans, K. E. & Alderson, A. Auxetic materials: Functional materials and structures from lateral thinking!. Adv. Mater. 12(9), 617–628 (2000).
CAS Google Scholar
Bhullar, S. K. Three decades of auxetic polymers: a review. e-Polymers 15(4), 205–215 (2015).
Google Scholar
Ren, X., Das, R., Tran, P., Ngo, T. D. & Xie, Y. M. Auxetic metamaterials and structures: A review. Smart Mater. Struct. 27(2), 023001 (2018).
Google Scholar
Nicolaou, Z. G. & Motter, A. E. Mechanical metamaterials with negative compressibility transitions. Nat. Mater. 11(7), 608–613 (2012).
ADS CAS PubMed Google Scholar
Saxena, K. K., Das, R. & Calius, E. P. Three decades of auxetics research− materials with negative Poisson’s ratio: A review. Adv. Eng. Mater. 18(11), 1847–1870 (2016).
CAS Google Scholar
Evans, K. E. & Alderson, K. L. Auxetic materials: the positive side of being negative. Eng. Sci. Educ. J. 9(4), 148–154 (2000).
Google Scholar
Lakes, R. Foam structures with a negative Poisson’s ratio. Science 235, 1038–1041 (1987).
ADS CAS PubMed Google Scholar
Yang, W., Li, Z. M., Shi, W., Xie, B. H. & Yang, M. B. Review on auxetic materials. J. Mater. Sci. 39(10), 3269–3279 (2004).
ADS CAS Google Scholar
Liu, Y. & Hu, H. A review on auxetic structures and polymeric materials. Sci. Res. Essays 5(10), 1052–1063 (2010).
Google Scholar
Luo, C. et al. Design, manufacturing and applications of auxetic tubular structures: A review. Thin-Walled Struct. 163, 107682 (2021).
Google Scholar
Lakes, R. S. & Elms, K. Indentability of conventional and negative Poisson’s ratio foams. J. Compos. Mater. 27(12), 1193–1202 (1993).
ADS Google Scholar
Scarpa, F. & Smith, F. C. Passive and MR fluid-coated auxetic PU foam–mechanical, acoustic, and electromagnetic properties. J. Intell. Mater. Syst. Struct. 15(12), 973–979 (2004).
CAS Google Scholar
Greaves, G. N., Greer, A. L., Lakes, R. S. & Rouxel, T. Poisson’s ratio and modern materials. Nat. Mater. 10(11), 823–837 (2011).
ADS CAS PubMed Google Scholar
Jiang, J. W. & Park, H. S. Negative poisson’s ratio in single-layer black phosphorus. Nat. Commun. 5(1), 1–7 (2014).
Google Scholar
Alderson, A. & Alderson, K. L. Auxetic materials. Proc. Inst. Mech. Eng. Part G J. Aerosp. Eng. 221(4), 565–575 (2007).
CAS Google Scholar
Donoghue, J. P., Alderson, K. L. & Evans, K. E. The fracture toughness of composite laminates with a negative Poisson’s ratio. Phys. Status Solidi (b) 246(9), 2011–2017 (2009).
ADS CAS Google Scholar
Quan, C. et al. 3d printed continuous fiber reinforced composite auxetic honeycomb structures. Compos. B Eng. 187, 107858 (2020).
CAS Google Scholar
Zhang, X. C., Ding, H. M., An, L. Q. & Wang, X. L. Numerical investigation on dynamic crushing behavior of auxetic honeycombs with various cell-wall angles. Adv. Mech. Eng. 7(2), 679678 (2015).
Google Scholar
Imbalzano, G., Tran, P., Ngo, T. D. & Lee, P. V. A numerical study of auxetic composite panels under blast loadings. Compos. Struct. 135, 339–352 (2016).
Google Scholar
Gorodtsov, V. A., Lisovenko, D. S. & Lim, T. C. Three-layered plate exhibiting auxeticity based on stretching and bending modes. Compos. Struct. 194, 643–651 (2018).
Google Scholar
Zhao, X. et al. Bending response and energy absorption of sandwich beams with novel auxetic honeycomb core. Eng. Struct. 247, 113204 (2021).
Google Scholar
Jiang, H., Ziegler, H., Zhang, Z., Atre, S. & Chen, Y. Bending behavior of 3D printed mechanically robust tubular lattice metamaterials. Addit. Manuf. 50, 102565 (2021).
Google Scholar
Zhong, R. et al. Mechanical properties of concrete composites with auxetic single and layered honeycomb structures. Constr. Build. Mater. 322, 126453 (2022).
Google Scholar
Arifurrahman, F., Critchley, R. & Horsfall, I. Experimental and numerical study of auxetic sandwich panels on 160 grams of PE4 blast loading. J. Sandw. Struct. Mater. 23(8), 3902–3931 (2021).
Google Scholar
Choudhry, N. K., Bankar, S. R., Panda, B. & Singh, H. Experimental and numerical analysis of the bending behavior of 3D printed modified auxetic sandwich structures. Mater. Today Proc. 56, 1356–1363 (2021).
Google Scholar
Usta, F., Türkmen, H. S. & Scarpa, F. Low-velocity impact resistance of composite sandwich panels with various types of auxetic and non-auxetic core structures. Thin-Walled Struct. 163, 107738 (2021).
Google Scholar
Li, C., Shen, H. S. & Wang, H. Full-scale finite element modeling and nonlinear bending analysis of sandwich plates with functionally graded auxetic 3D lattice core. J. Sandw. Struct. Mater. 23(7), 3113–3138 (2021).
Google Scholar
Tessler, A., Di Sciuva, M. & Gherlone, M. A consistent refinement of first-order shear deformation theory for laminated composite and sandwich plates using improved zig-zag kinematics. J. Mech. Mater. Struct. 5(2), 341–367 (2010).
Google Scholar
Reddy, J. N. Mechanics of laminated composite plates and shells: Theory and analysis (CRC Press, 2003).
Google Scholar
Di, K. & Mao, X. B. Free flexural vibration of honeycomb sandwich plate with negative Poisson’s ratio simple supported on opposite edges. Acta Mater. Compos. Sin. 33, 910–920 (2016).
Google Scholar
Khoshgoftar, M. J. & Abbaszadeh, H. Experimental and finite element analysis of the effect of geometrical parameters on the mechanical behavior of auxetic cellular structure under static load. J. Strain Anal. Eng. Des. https://doi.org/10.1177/0309324720957573 (2020).
Google Scholar
Khoshgoftar, M. J., Barkhordari, A., Seifoori, S. & Mirzaali, M. J. Elasticity approach to predict shape transformation of functionally graded mechanical metamaterial under tension. Materials 14(13), 3452 (2021).
ADS CAS PubMed PubMed Central Google Scholar
Khoshgoftar, M. J. & Barkhordari, A. Sensitivity analysis and study of parameters affecting auxetic cells with reentrant cell structure. Mater. Today Commun. 31, 103786 (2022).
CAS Google Scholar
Download references
Department of Mechanical Engineering, Faculty of Engineering, Arak University, Arak, 3815688349, Iran
M. J. Khoshgoftar & A. Barkhordari
Department of Mechanical Engineering, Politecnico Di Milano, Via La Masa, 1, 20156, Milan, Italy
M. Limuti, F. Buccino & L. Vergani
Department of Biomechanical Engineering, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology (TU Delft), Mekelweg 2, 2628 CD, Delft, The Netherlands
M. J. Mirzaali
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
M.J.K. and A.B. designed the research, implementation of the research, and performed numerical analysis and data analysis. M.L. and M.J.M. performed the experiments. M.J.K. and A.B. wrote the paper. F.B. and L.V. edited the paper. All the authors reviewed the manuscript.
Correspondence to M. J. Khoshgoftar.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Khoshgoftar, M.J., Barkhordari, A., Limuti, M. et al. Bending analysis of sandwich panel composite with a re-entrant lattice core using zig-zag theory. Sci Rep 12, 15796 (2022). https://doi.org/10.1038/s41598-022-19930-x
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-19930-x
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Advanced search
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.VIDEO: Expansion Set for Athens, Ga., Film, TV Studio One Year Into Construction – Construction Equipment Guide
Wed September 21, 2022 – Southeast Edition
In November 2021, construction began on a $60 million, 45-acre sound-stage development project in Athens, Ga., to attract film and television production to the college town.
In September 2022, not even one year into the project, Athena Studios announced that it had purchased an additional 65 acres of land adjacent to the original site currently under construction at 900 Athena Dr. The move was made in anticipation of demand for its initial 200,000-sq.-ft., purpose-built production space.
The expansion will add 350,000 sq. ft. to the already massive facility, which is scheduled to open its first phase on Mar. 1, 2023, with the ability to host productions of any size. The increased acreage will allow for the construction of backlot space and make Athena one of the largest production studios in Georgia.
More than 300 workers have been involved with the construction of the studio over the last 10 months, the Athens Banner-Herald reported.
Athena Studios CEO Joel Harber told the Athens news source that the University of Georgia (UGA) and Georgia Film Academy (GFA) building, which is currently being built to house the studio's business office entrance, is slated to open later this year.
Designed to create a local industry workforce through its partnership with UGA and GFA, the building will include a 14,000-sq.-ft. learning center with its own sound stage. Film and TV production students will be moving from their current 2,000-sq.-ft. space on campus into the much larger facility when it is finished.
Just past the UGA/GFA structure, according to Harber, the studio plans to erect a secure gate within which will be sound stages, a mill, offices and a base camp. The stages will be equipped with “silent air” systems so that productions can record clear audio without having to turn off the air-conditioning system during filming, and industry standard Insul-Quilts will be used for soundproofing.
The Banner-Herald noted that the expanded secure backlot will feature a variety of spaces to build sets and film outdoor scenes.
The new studio company has partnered with Atlanta-based Raulet Property Partners, which matches film and television productions with Georgia studio space, and Forest Park, Ga.-based Cinelease, a provider of lighting and grip equipment, power distribution, grip trucks, expendables and heavy equipment to productions around the country.
“[Athena is] stepping up to meet the industry’s demand,” explained Harber. “We’re proud to play such an important role in Georgia’s TV and film industry, bringing opportunity to the hundreds of crews and experienced vendors in and around Athens.”
While watching the credits of Disney's “Jungle Cruise” one evening several years ago, Harber, an Athens-based real estate developer, noticed that the movie was made on location in Hawaii and on sound stages in Atlanta. That fueled a desire to put his hometown on the map for Georgia film production, and shortly after he began to make it a reality.
With the groundbreaking for Athena Studios last fall, the UGA graduate’s dream of building a studio in his college’s town started take shape.
Harber told the Banner-Herald that the studio's primary goal is to stay in constant production by employing International Alliance of Theatrical Stage Employees (IATSE) union members on television shows from companies such as Netflix and Warner Brothers, and will be open to working with independent productions as well.
“There is a wealth of creative talent in Athens in all facets of what you need to make movies and television,” he explained. “I'm hoping that some of that gravitates towards us.”![]()
An artist’s rendering shows what Athena Studios will look like at 900 Athena Drive in Athens. The first phase of the soundstage is expected to be completed by early 2023. (Photo Courtesy of Athena Studios)
Today’s top stories
An artist’s rendering shows what Athena Studios will look like at 900 Athena Drive in Athens. The first phase of the soundstage is expected to be completed by early 2023. (Photo Courtesy of Athena Studios)
Concrete Sector Continues to See Project Delays, Production Cut-Backs
Atkinson Moves Mountains On California Highway Project
Uncommon MSE Wall Failure Calls for Unique Geotechnical Solutions
Bobcat Unleashes T86 Compact Track Loader, S86 Skid Steer Loader
Texas AGC Lauds Record $85B in Funding
Case E Series Excavators Reloaded With Major Evolution in Operator Experience
American Cancer Society to Host Big Dig Denver's 2nd Annual Event
Raised On Blacktop With American Pavement Specialists
Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.Contents Copyrighted 2022, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.
Richest Musicians In Nigeria And Their Networth 2022: Top 10 Wealthiest – Bscholarly
Top 10 Richest Musicians In Nigeria: Music is a branch of art that is primarily made to entertain audience. It is usually expressed by different instruments and organs. These instruments are systematically and harmoniously pit together to make intelligible sounds that are very appealing to the ears and rhythmic. Music is not limited to the sounds, or rhythms, it encompasses both the lyrical compositions accompanying the sounds which are put together in a harmonious sequence and tunes.
Music has been an age long concept that is used for numerous purposes. Ranging from technological innovations and enhancement of music production, music has seemlessly become a global phenomenon and a very lucrative venture. Music is art and one of the most popular form of literature. In line with global best practice, African continent has shown great interest in the art and has overtime excelled in the field.
Recommended: Most Famous People in the World 2022
1. WizKid: Networth $21 Million. Ayodeji Ibrahim Balogun AKA Wizkid was born on 16 of July 1990, he is known to be a singer and songwriter having begun his career at a very tender age. He rose to fame after signing a deal with the Empire Mates Entertainment (E.M.E), a Label managed by the music star, Banky W.
Richest and Wealthiest Musicians in Nigeria 2022
With songs like Hola At your Boy and many others before leaving the label at the expiration of his contract. He has also achieved international recognition and collaborations with artist like Drake and others. He is one of the best in Nigeria and Africa with a Grammy Award to his title he is also recognized as one of the richest musicians in Nigeria and beyond.
2. Davido: Networth $19.5 Million. The first Nigerian singer to be featured in a FIFA World Cup single, David Adedeji Adeleke is known with his stage name, Davido. Born on the 21st of November 1992. He is a Nigerian-American singer and songwriter, a record producer.
Who is the Richest Musician in Nigeria
He has received numerous awards and nominations for his tons of musics and studio albums. He is known for affluence and relation with rich family members. He is considered one of the top hip-hop star with local and international recognitions and deals. He is one of the richest musicians in Nigeria.
Also see: Richest Men in South Africa and their Networth 2022
3. Don Jazzy: Networth $18.5 million. Michael Collins Ajereh popularly known as Don Jazzy was born in November 1982. He is a Nigerian record producer and singer. He founded Marvin Records (a reputable Record Label with lots of famous music artists) he is also the CEO.
10 richest musicians in Nigeria & their cars
He also founded Mo Hits in conjunction with D’Banj. Don Jazzy is known to be one of the most successful music producer in Nigeria having signed at some point, music stars like Wizkid, Tiwa Savage and others. Don Jazzy remains one of the richest musicians in Nigeria with more participation in music production.
4. Burna Boy: Networth $17 million. Damini Ebunoluwa Ogulu was born on the 2nd of July 1991. He is a Nigerian singer, rapper and music producer known for his unique music style of Afro, raggae and pop. He is popularly known by his stage name; BURNA BOY. After his record release of Like To Party, he rose to fame as the song made the list of one of the big tracks in 2012.
List of Top 10 Richest Musicians In Nigeria 2022
He had a sign up with record labels like the Warner Music Group and the Bad Habit/Atlantic Records in the United States of America. He won the Best World Music Album at the 63rd Annual Grammy Awards in 2021, making him the first Nigerian to clinch the award. With over six albums and numerous songs to his name, endorsements and record deals to his credit, Burna Boy remains one of the richest musicians in Nigeria.
Also see: Oldest Books in the World 2022
5. 2Baba: Networth $16 million. Innocent Ujah Idibia popularly known as 2baba, his stage name is one of the foremost musicians in Nigeria and one of the most talented too. He was born on the 18th of September 1975. He is not just known for song writing, and singing but also for music production, philanthropy, activism and entrepreneurship. One of the few best singers with amazing lyrics.
Richest musician in Nigeria Forbes 2022
He is one of the most famous singer in Nigeria and beyond with tons of music and studio albums to his credit. After his hit single titled African Queen in the early 2000, Idibia became a star in the industry with lots of signings and record deals. He was once an ambassador for NAFFAC, Guinness beer, Airtel communication network and so many others, he has also won numerous awards including being the first winner of the MTV EMA Best African Act category in 2005.
He is also listed as one of the most decorated artist in the industry. He is revered and considered a role model to many in the industry and certainly one of the richest.
6. Olamide: Networth $12 million. Olamide Gbenga Adedeji popularly known as Olamide which also is his stage name. He was born on the 15th of March 1989. Olamide is a Nigerian rapper, singer and music producer. The Nigerian hip-hop and rap star expresses his music prowess perfectly in both yoruba and English language. He is a professional singer with local and international recognition.
Forbes List of Richest Musicians in Nigeria
He released his debut studio album in 2011 titled Rapsodi under Coded Tunes Record Label. He grew in his career path with lots of songs, awards and nominations to his credit. Some of his hit track albums includes; YBNL Nation otherwise known as Yahoo boy no Laptop. The album featured songs like, voice of the street, Stupid Love and some others. With his endorsement deal in 2013, he became the first Nigerian to sign an endorsement deal with Cîroc. He is one of the richest musicians in Nigeria.
Recommended: Richest Authors In the world
7. D’banj: Networth $11 million. D’Banj is the stage name for the rock star, Oladapo Daniel Oyebanjo. Born on the 9th of June 1980, D’Banj, the founder of Mo’ Hits Record is a producer and a Nigerian singer and rapper. He had had a very successful music career and famous for his hit records.
Richest and Wealthiest Musicians in Nigeria 2022
He is also a series award winner, one of which includes the awards for Best African Act conferred at the MTV Europe Music Awards held in 2007. The music star had been a part of record labels like the GOOD Music, RCA, Sony Music Entertainment and others where he made hit tracks. He is considered one of the most successful singers with global recognition and fame. He, with lots of hit songs to his name, is one of the richest musicians in Nigeria.
8. Phyno: Networth $11 million. Chibuzor Nelson Azubuike popularly known as Phyno which is his stage name was born on October 9th 1986. Phyno is a Nigerian rapper, songwriter, singer as well as a record producer who has been on the spotlight for the good reasons in recent times. The pop rapper had started his music career in 2003 as a producer. He is one of the renowned rapper who displays great prowess in rapping using Igbo language.
Top 10 richest Nigerian musicians
In 2014, he had the release of his debut studio album No Guts No Glory. The album featured hit tracks like; Parcel, O Set, Ghost Mode and Man of the Year. With numerous collaborations and hit sounds with famous music stars like Me Raw, M I Ibaga, Timaya and many others, he has rose to fame as one of the richest musicians in Nigeria.
Also see: Past leaders of Nigeria from 1960 till date
9. Timaya: Net worth $10.5 million. Inetimi Timaya Odon popularly known by his stage name, Timaya was born on the 15th of August 1980. Timaya is a multiple award-winning singer. A Nigerian singer and songwriter who hails from Odi, in Bayelsa state, which is in the South-South Region of Nigeria.
Wealthiest artist in Nigeria
The Egberi 1 of Bayelsa as he is fondly called is the founder of Dem Mama Records Limited and a renowned Afro-caribbean and dancehall music star. With his numerous song records and and albums, he gained international recognition and prominence with the release of his studio album De Rebirth in partnership with Black Body Entertainment.
This was further solidified with his hit single, Plantain Boy. He is one of the richest Nigerian musicians with lots of awards and nominations to his career.
10. Tiwa Savage: Net worth $9 million. Tiwa Savage is the stage name of the Nigerian singer and vocalist Tiwatope Savage. She was born on the 5th of February 1980. She had moved to london when she was 11 to further her education after which she shortly after ventured into music as a backup vocalist for foreign artists, she was able to sign a publishing deal with Sony/ATV Music Publishing in 2009. She later moved back to Nigeria and signed a record deal with Marvin Records in 2012 and had a successful career with the emerging growth in the industry. She had her debut studio album titled Once Upon a Time was released in 2013.
Top 20 richest musicians in Nigeria and their net worth 2022
From there she released numerous other singles like, kele kele love, without my heart, Eminado and many others. Tiwa Savage in June 2016 signed a publishing and management deal with Roc Nation and released a debut in 2017 which gained massive popularity and award nominations. She signed a deal with Universal Music Group and that marked her departure from Marvin Records in 2019. With a prolific afro and pop as well as hip-hop sound records, she is a fluent singer in both English and Yoruba. Tiwa Savage is one of the richest musicians in Nigeria.
Recommended: Fastest Rappers in the world currently
In conclusion, Africans has talents and one of the major industries where such talents are showcased is the music industry. These musicians are not just self made and financially famous, they also promote the countries image here in Nigeria and beyond.
Edeh Samuel Chukwuemeka ACMC, is a Law Student and a Certified Mediator/Conciliator in Nigeria. He is also a Developer with knowledge in HTML, CSS, JS, PHP and React Native. Samuel is bent on changing the legal profession by building Web and Mobile Apps that will make legal research a lot easier.
Your email address will not be published.
📚 Interesting Articles For You!
🔥 School News & Scholarships
About Us
Address & Contact
Follow Us on Social Media
Our Relevant PagesTransit Briefs: NYMTA, LA Metro, OKC Streetcar, RTD, Boston’s South Station, Metro-North, LIRR – RailwayAge Magazine
Gov. Hochul, MTA Chief Executive Officer Janno Lieber, and Demetrius Crichlow, Senior Vice President of NYCT Subways tour a 7 train with newly installed high- resolution security cameras at the Corona Maintenance Facility in Queens, Tuesday Sept. 20, 2022. Eventually, all 6,500-plus subway cars in the NYCT system will be outfitted with two high resolution video cameras to ensure safety for straphangers. (Kevin P. Coughlin / Office of Governor Kathy Hochul)
Metropolitan Transportation Authority (MTA) to install security cameras in every subway car. Also, LA Metro releases new photos of the K Line’s Hyde Park Station artwork; the OKC Streetcar reaches one million rider milestone; the Regional Transportation District (RTD) closes financial transaction reducing its annual debt service by more than $144 million over 200 years; officials celebrate the next chapter in the redevelopment of Boston’s South Station; and Metro-North Railroad and Long Island Rail Road (LIRR) will get their own police detail.
MTA
Gov. Kathy Hochul on Sept. 20 announced that MTA’s New York City Transit (NYCT) has received a $2 million award, through the Urban Area Security Initiative federal grant program, to provide funding for the installation of cameras across the entire fleet of subway cars, “enhancing security coverage, and, most importantly, increasing passenger confidence in mass transit safety.”
The Urban Area Security Initiative is a program under the U.S. Department of Homeland Security Preparedness Grants. The funding, MTA says, will enable the purchase of 5,400 cameras to be installed on 2,700 NYCT subway cars, two per car. Additionally, the program will fund approximately 3,800 cameras expanding coverage in approximately 130 subway stations.
According to the MTA, funding will further strengthen NYCT’s existing security network of more than 10,000 cameras across all 472 subway stations. The new funding covers the cost of camera installation on 6,355 cars, allowing the MTA to fully outfit every subway car with cameras—supplementing an existing camera pilot program that includes 200 cameras in 100 subway cars. Additionally, funding from the Subway Action Plan totaling $3.5 million will enable the purchase of 7,310 cameras on 3,655 cars, two per car. The total funding to complete the installations equals $5.5 million. When installation begins, MTA says, an additional 200 train cars per month will have cameras installed until the entire subway car fleet is camera-equipped, which is anticipated to occur sometime in 2025. In addition, when new R211 subway cars are delivered starting in early 2023 they will already be camera-equipped, MTA says.
According to the MTA, this is the latest measure Gov. Hochul has taken to deter crime and enhance the safety of New York City Subways. In June, Gov. Hochul signed legislation to protect roughly 11,000 more transit workers against assault and harassment. The legislation extended criminal charges to individuals who assault station customer assistants, ticket or revenue collectors, maintenance workers, repairers, cleaners, and their supervisors, who were not protected under previous laws.
“My number one priority as Governor is keeping New Yorkers safe,” Governor Hochul said. “I am proud that we will be installing cameras on all Subway cars – expanding our security capabilities, deterring crime, and providing our law enforcement with support. As we continue welcoming riders back to the transit system, we will continue doing everything in our power to keep riders safe.”
According to the MTA, all Metro-North trains are equipped with cameras, and more than 90% of LIRR trains are equipped with security cameras. Last year, camera installation across every subway station was accelerated and completed ahead of schedule. Two thousand cameras were installed in 2021 alone, MTA says.
“The MTA is committed to providing safe and reliable public transit and the Urban Area Security Initiative Award marks the latest step forward in the Authority’s mission to be a fully monitored transit system by better deterring crime and increasing passenger security,” MTA says.
LA Metro
At the future Hyde Park Station on the K Line, the Metro Art-commissioned artwork installed at the station’s entrance and platform celebrates the “vibrant culture, community and music of Hyde Park.”
According to Metro, the artwork, Hyde Park Oasis, which was created by artist Carlson Hatton, who was commissioned through an open competitive process following the recommendation of a panel of community-based arts professionals, is “a series of art panels layered with history and visions for the future shared by Hyde Park residents, small business owners and youth.”
Hyde Park Oasis, Metro says, is the culmination of many engaged public conversations, which brought together the artist and Hyde Park residents with deep community ties. Residents shared personally meaningful historical and cultural references and identified key imagery that represented their vision and knowledge of Hyde Park, all while Hatton listened.
An integral part of the design’s development, Metro says, was Hatton’s mentoring of four local student artists: Joshua Castro, Barbara Visconti, Felipe Garcia and Jarrid Godbold. Throughout the course of several years, they researched neighborhood references by sourcing and photographing imagery unearthed in the community conversations. Hatton then wove these images into the 10 densely layered paintings of Hyde Park Oasis.
Classic low-riders along Crenshaw Boulevard, live music gatherings, energetic social scenes, verdant gardens with fruit trees, mask festivals and the playing of hand-made African drums are all included, as are hundreds of patterns documented along Crenshaw. Music emerged as a key theme, too, with influential Crenshaw Corridor musicians and styles—from legendary drummer Robin Russell to contemporary jazz artists to the drum line tradition—all visible in the work.
With rhythmic patterns of color and wide skylines of majestic palm trees cresting notable buildings on the horizon, Hyde Park Oasis is “a tribute to Hyde Park and its soundtrack as it echoes across South Los Angeles,” Metro says.
These artworks, which are fabricated as durable porcelain enamel steel panels, are now visible on all sides of Hyde Park Station at Crenshaw Boulevard and Slauson Avenue.
Learn more about the artwork here.
Check out previous posts on the installed station artworks of the Crenshaw/LAX (K Line) Transit Art Program featuring videos on the K Line artists and artwork by filmmaker Mobolaji Olambiwonnu:
Learn more about the Crenshaw/LAX (K Line) Transit Project, now K Line, Art Program here.
OKC Streetcar
OKC Streetcar announced on Sept. 16 that it reached its one million rider milestone on Saturday, Sept. 10, since service began in December 2018, according to EMBARK officials.
A 2009 voter-approved project of Oklahoma City’s Metropolitan Area Projects (MAPS) 3 program, OKC Streetcar “aims to strengthen community connections, support economic growth, and enhance mobility for residents and visitors in OKC’s core.” OKC Streetcar construction was completed in October 2018, and the service officially launched on Dec. 14, 2018, with fare collection beginning in February 2019. The streetcar includes two route options: the 4.8-mile Downtown Loop and the two-mile Bricktown Loop, and serves five Downtown OKC districts, including Automobile Alley, Bricktown, City Center, Arts District and Midtown.
OKC Streetcar is the region’s first local passenger rail in nearly a century, says EMBARK, the business unit of the Central Oklahoma Transportation & Parking Authority (COTPA), a public trust administered by the City of Oklahoma City. Now the Regional Transportation Authority (RTA) of Central Oklahoma is conducting federal studies to bring regional commuter rail service to Edmond, Oklahoma City, Norman, and Tinker Air Force base.
“I commend everyone at OKC Streetcar for working together to get through a two-year period that was very challenging across the country for public transit, downtowns and tourism,” said Oklahoma City Mayor David Holt. “As we transition into some normality, the Streetcar continues to emerge as a valuable resource for visitors, who are themselves an ever more important part of our local economy.”
Holt adds, “As we begin to welcome more aspects of a comprehensive transit system, including the RAPIDBus Rapid Transit line and the potential for commuter rail through RTA, we will begin to fully realize the important role that the Streetcar plays as a circulator for residents arriving downtown without a car.In the meantime, the Streecar has already spurred major economic development downtown, and in moving more an a million passengers, it has obviously already established itself as a desirable amenity.”
The first MAPS projects began on Dec. 14, 1993, when voters approved the first sales tax. MAPS for Kids was established in 2001 when voters approved a second MAPS tax, raising $700 million and benefitting public schools located in Oklahoma City.
Voters approved MAPS 3 on Dec. 8, 2009. The sales tax ran from April 2010 through December 2017. MAPS 4 was approved in 2019 and will raise a projected $1.1 billion over eight years, EMBARK says. MAPS 4 will “continue the transformation of Oklahoma City’s public transit system with $97 million dedicated to dramatic new improvements, including two Bus Rapid Transit lines and more than 500 bus shelters.”
“Continuing to build transportation that is accessible to all means greater opportunity for our future generations,” said Assistant City Manager and EMBARK Administrator Jason Ferbrache. “Today, the streetcar is a critical strategic element of our region’s transportation future—connecting with as many as three RAPID transit lines, dozens of bus routes, bike share, and the RTA’s visionary commuter rail network.”
RTD
RTD announced on Sept. 19 that in late August it closed a financial transaction that refinanced its FasTracks Series 2014 certificates of participation (COPs) with FasTracks bonds to lock in savings of more than $144 million in future interest expense over the next 22 years.
The transaction, authorized by RTD’s Board of Directors at its July 26 meeting, will “reduce its annual debt service by a significant amount through interest savings–on average, the net present value of the savings is approximately $6.5 million each year in today’s dollars,” the agency says. This reduction, RTD says, will increase future budgeting flexibility and help RTD continue to deliver valuable public transportation services to the community. RTD adds that it regularly looks for opportunities to decrease its financial obligations.
“This transaction is a consequential achievement and demonstrates thoughtful stewardship of public funds and fiscal accountability,” RTD General Manager and CEO Debra A. Johnson said.
Referencing the agency’s strategic plan, she added: “Our priority of financial success is paramount. We want to optimize the dollars we spend in the most efficient manner possible. With this transaction, we are making the most of taxpayer dollars for the betterment of the agency.”
The 2014 COPs were initially issued to provide part of the funding to build RTD’s newest commuter rail line, the N Line, which serves Denver, Commerce City, Northglenn and Thornton. These COPs were refinanced with $320 million in bond proceeds, proceeds from the 2014 COPs debt service reserves and $93.3 million of RTD cash, including $0.3 million for the cost of issuance, RTD says.
According to RTD, the refinancing used the approximately $350 million of remaining FasTracks sales tax bond borrowing capacity approved by voters in 2004. RTD says it used the remaining debt capacity with this transaction to “realize significant additional interest savings achieved through issuing bonds rather than COPs and to avoid any expiration of the voter authorization.”
Beyond reducing FasTracks’ outstanding debt and debt service, the refinancing, RTD says, also improves the agency’s ability to issue COPs to fund future projects. However, RTD adds that it has no current plans to issue additional debt and forecasts that ongoing district needs will be funded with cash.
Boston South Station
Privately-owned global real estate firm Hines on Sept. 20 was joined by Gov. Charlie Baker, Mayor Michelle Wu, Senator Lydia Edwards, and Chairman and State Representative Aaron Michlewitz to celebrate the beginning of the “highly anticipated” expansion and improvement of the Gov. Michael S. Dukakis Transportation Center at Boston’s South Station. The project, Hines says, is “notable for its significant private investment in the city’s transit hub, and the continuation of South Station’s history of being a regional transportation core and destination.”
Work on the 51-story, 1,020,000-square-foot building, which was developed and designed by global placemaker Pelli Clarke & Partners, began in January 2020 and will “redefine the Boston skyline,” Hines says.
Currently, the South Station train station and bus terminal are two separate buildings, making connections between them difficult and inconvenient. According to Hines, the completion of the South Station Transportation Center will create comfortable and convenient transfers between all modes of transit, with direct connections between the rail and bus terminals.
According to Hines, the new outdoor concourse area will increase in size by 67% for an improved experience for passengers and people passing through the station. The tracks and platforms will be covered, and the outdoor concourse will be transformed into an architecturally significant gateway to the city. The new bus terminal will increase capacity by more than 50% and will provide more convenient connections to the train and subway.
Hines says it has committed to supporting local employment opportunities, including at least 50% of the total work hours benefitting Boston residents; at least 25% of the total work hours will benefit people of color; and at least 10% of the total work hours benefiting female workers. Construction is being privately funded and, along with creating a new public space at the train station concourse, it will also improve the streetscape along Atlantic Avenue with new sidewalks, granite curbs, streetlights, greenery and street furniture, “further activating the area and resulting in a vibrant, safe and welcoming experience for all.”
In addition to transit and station improvements, Hines says the development will deliver a state-of-the-art office and residential tower positioned directly above South Station. Anticipated for delivery in 2025, the first phase of the project will offer approximately 670,000 rentable square feet of Class A office and amenity space, as well as approximately 166 luxury residential condominium units and more than 500 parking spaces.
The office component will feature 29,000 square feet, primarily column-free, floor plates with 13 feet floor-to-ceiling heights and unobstructed views of downtown Boston and Boston Harbor. The residential component of the tower will offer studio, one-, two- and three-bedroom residences along with penthouse duplex homes. Office tenants and residents will be provided with market-leading amenities such as a large park situated on top of the parking garage; conference center; fitness and wellness center, a restaurant and landscaped terrace with a swimming pool and dining and entertaining space for resident use on the 36th floor.
Strategically located at the nexus between Boston’s Central Business District and the rapidly growing Seaport District, Hines says the property has convenient access to Logan International Airport, as well as the area’s primary highways, including Interstate 93 and the Massachusetts Turnpike.
The building is designed to achieve LEED Gold certification, WELL Gold certification and to be one of the first BREEAM “Excellent” ratings in the U.S.
Metro-North Railroad/LIRR
According to a WSHU report, starting in January, Metro-North Railroad and LIRR will have a dedicated unit of police officers ride the commuter rail system to “address growing safety concerns of riders and employees.”
According to the report, riders surveyed in August gave the LIRR its lowest marks for safety, crime and quality of life. Major crimes on the LIRR were up by 73% through August, including theft and violent crimes against riders and employees.
“These are true victims,” MTA Police Commissioner John Mueller said. “These are people that have to go home and then they have to come back to work a lot of the time traumatized. So, we’re going to be watching this very carefully. And we’re going to be advocating for consequences.”
According to the report, Mueller told the MTA Board during Monday’s meeting the train patrol unit will be deployed with 60 existing officers, following routes to stations with the most ridership.
Last week, the MTA announced record ridership numbers for the commuter rail system, back to pre-pandemic levels. Metro-North Railroad set a ridership record, carrying more than 181,600 riders, the highest since at least March 2020. LIRR carried more than 200,000 riders on a weekday for the second time since March 2020. Its record was set earlier in the month since COVID.
The creation of the new unit will be “cost neutral” to the department, according to the MTA, because it uses existing officers, WSHU reported. The MTA police force, with about 1,100 officers, stepped up patrols of LIRR trains earlier this year to combat rising crime. The transit agency has hired 500 additional officers since 2019.
According to the report, with more commuters on the rails, Mueller said more officers and canines on the platform and trains will keep everyone safe. Starting at 5 a.m., officers will start on either side of the train platform, get on trains and walk to the middle car, while interacting with riders.
“The goal is to be highly visible to deter crime,” Mueller said. “We want a lot of rider interaction with the officers,” he added.
Rail Group News offers news and analysis from Railway Age, IRJ and RT&S by email.








