Most music producers and engineers do not have the luxury of doing their work in big-budget studios that are perfectly engineered to achieve a dialed-in sound. No, most producers (like I would I imagine) are producing in side rooms, bedrooms, and imperfect spaces in our homes and apartment buildings.
And smaller rooms like the one you're likely in right now pose a completely different set of problems that most amateur music producers aren't equipped to handle. We don't have sound physics degrees or decades of audio acoustics experience. Hell, at least I know I don't.
But when I was lucky enough to get linked up with KRK to review their ROKIT 10-3 G4 Series, I wanted the best results for the review. So I went straight to the source and asked Phil O’Keefe, Gibson Brand's Senior Editor with years of experience as a Recording Engineer, how I could get the best sound in a small, bedroom studio.
KRK was nice enough to let me publish the interview here so that the producer community can benefit from his wealth of knowledge.
Before we jump into this interview, I want to say that many of these things are subjective―ask ten different engineers, and you’ll get ten different responses.
I’ve always felt that monitors are one of the things that you should not skimp on for home studios because almost every decision you make in the studio is based on what the monitors are telling you. Accurate monitoring is crucial. I prefer smaller monitors in smaller studios because they take up less space and cost less. Also, a smaller monitor's frequency response and volume won’t be too much for the room. For this application, I recommend smaller drivers and lower wattage. You don’t want speakers with 10- or 12-inch drivers and 300-watt power amps that are so large they drive the room into acoustic compression and overwhelm it.
A KRK Classic 5 will be a good choice in these rooms, or the KRK Classic 7 if you have a little more space. Another good option is the ROKIT G4, which has some handy features from the onboard DSP that can help new users optimize the speakers to compensate for some of the trouble spots in the room. If you can budget for a pair of ROKIT 5 or ROKIT 7 monitors, that’s probably an ideal entry-level option for small bedroom studios.
Additionally, if you can afford a pair of KRK V-Series or other upscale monitors, that could be a great choice, too. But for most entry-level users, I think the ROKIT G4s are an excellent place to start.
Bedroom studios can have a host of issues! To start with, electricity.
You may have poorly wired outlets, which can lead to noise issues in the equipment you plug in. Electrical ground-related noise can cause a lot of issues. Tools such as AC line conditioners can help with electrical noise issues. Additionally, it is essential to wire up the studio correctly so you don’t create ground loops.
Another primary consideration is acoustics and monitoring. Accuracy can be difficult in a small home studio―some of that is just physics. The dimensions of a room don’t change, and they will impact the room's modal response. If you have a choice, selecting a room with suitable dimensions is very important.
Additionally, if you have a room with interior surfaces that are all very hard (like cinderblock or brick), you’re going to get a lot of slapback echo and have a longer room reverb time. Getting better isolation and lower interference can be big problems―not only for bleed (where the sound you’re creating disturbs others) but also due to sounds coming in from outside, which might cause you to have to clean up your recording or re-track it.
Usually, these issues appear when recording things with a microphone, whether a vocalist, guitar, drum kit, or anything of that nature.
Soundproofing a room can be expensive and challenging. Since many people have their recording rigs based on a laptop with an audio interface, it’s often fairly easy to just move to a location with better acoustics and isolation for recording things like live drums. Then, additional work like keyboard elements, guitar overdubs, and vocals can be done at home. Cab simulators and impulse responses can also be very helpful for recording guitars. Many producers make beats at home with samples, loops, MIDI, and synthesizers, which are all recorded directly. Another way you can get around those issues is by picking quieter times to record – such as midday when your neighbors are at work.
Additionally, if you have a lot of noise issues while you’re mixing, or the room acoustics aren’t that good, you can also opt to monitor on headphones. A good set of headphones can be a real lifesaver. I have about 30 different pairs in my studio, but I have been using the KRK 8400s as my primary mixing reference headphones since they were first released long before I worked for Gibson. They’re fantastic, and the new KNS 8402s are even better. Closed-back, circumaural headphones are essential when trying to track or record, but you don’t have to use sealed headphones for mixing.
Another common problem is that people will incorrectly set the toe-in angle of the monitors. That’s something where the KRK App (Apple/Google) can help. It has tools that will help you set the angles of both monitors equally and get the phase between them the same so that they’re not canceling out. There are a few KRK-specific tools in the KRK App, but most can be used with any monitor brand, so it’s a worthwhile free download for any home studio owner.
That’s a tough one. I don’t mean to cop out on this, but it will depend on the individual room's specifics. If you have a rectangular room with standard ceiling heights, you’ll usually want to set up with the sound shooting down the longer length of the room, with your left monitor the same distance from the left wall as your right monitor is from the right side.
Now, things get funky when the room has a weird shape because symmetry can become much more challenging. It’s all going to come down to the size and shape of the room, how you’re set up within it, and designing acoustic treatments around it. Two-inch-thick acoustic foam or compressed fiberglass panels are great for reflected sound―keeping mid- and high-frequency sound from slapping off a side wall and bouncing to the mix position, but they’re not going to stop the sound entirely. This is especially true for very low frequencies, which will go right through those types of panels as if they weren't even there.
Whenever possible, try to pick a symmetrical room with good dimensions―that will be best for what you want to do. Sometimes you don’t have a choice but to use a less-than-ideal room; in that case, you will need to learn the idiosyncrasies of the room. Try to become aware of things as you work in the room, look for how the frequencies are reinforced, play bass notes, and see how they respond. Does that same thing happen if you move to another room? Learn to compensate for the quirks of the space.
One thing to note here is that any space with dimensions that are the same or multiples of the same (ie: 8’W x 16’L x 8’H) will reinforce those same frequencies in all three dimensions, further compounding the problem throughout. Acoustically, the worst possible space to work in would be a cube.
It’s essential and beneficial for dealing with issues within the room. Monitors do not work in isolation. So, the better the room acoustics, the more accurate the entire monitoring setup. As mentioned, room dimensions are essential. There are room mode calculators online that will show you which low frequencies will give you problems in a room, and that’s important to know.
You could be chasing your tail thinking, “gosh, every time this guy plays a low A, it just sounds deafening,” when it might be the room making you think it’s deafening. It’s not because the monitors are inaccurate. It’s because the room and the monitors are inaccurate representations of what is being played.
One of the big misconceptions is that people will line every wall, ceiling, etc., with carpeting or thin acoustic foam because they think that will make it sound better. It won’t. Those types of materials are effective absorbers only at higher frequencies. Instead, you get a very unbalanced, dark-sounding room, so you’re constantly boosting the high end and end up with overly bright mixes. All you’re left with are the midrange and low frequencies; low frequencies are the hardest to deal with in a home studio.
A mix of acoustic treatments designed for the specific needs of the individual room is usually the best approach― absorption placed at the early reflection points and some diffusion at the back of the room. If it’s a larger room, you can use dedicated commercial diffusers or even just bookshelves lined with books. In most cases, you want as much low-frequency absorption and bass trapping as possible. It’s almost impossible to over-absorb in the low frequencies in a small room.
Another big misconception is that louder is better. It’s not.
There’s something called equal loudness curves (or the Fletcher-Munson curve). Human hearing is not linear. We perceive volume differently at different frequencies. In other words, if you have a low-frequency or high-pitched sound playing softly, your ears will not pick up as quickly as a midrange sound at the same volume. Additionally, while our hearing becomes more linear at higher levels, the louder you turn it up, the more likely you are to exacerbate the acoustical issues that your room already has.
You want to monitor at a level our ears are accurate but not so high that you’re driving the room into acoustic compression and making the issues it may have worse.
Ideally, the best monitoring level is about 85 dB SPL, A-weighted. This is the level at which our ears are flattest, where our hearing response is the most linear, and we hear things equally well in the low-, mid-, and high-frequency ranges. It also happens to be about the loudest you can listen for an entire workday without the risk of damaging your hearing.
When it comes to SPL, there is a meter you can get―either a physical one or an app on a smart device that allows you to measure the loudness of the sounds around you. This is one of the best free (or practically free) tools any new recording enthusiast can get because it will help you set your monitors to a volume level that affords the most accurate response and simultaneously protects your hearing. It will be your best friend in the studio.
That’s a somewhat controversial topic, and some will say “no,” because most small rooms already suffer from low-frequency acoustical issues, and a sub can worsen them. But, depending on what you’re doing and what type of music you’re working on, a sub can be very helpful.
For some genres, it’s almost a necessity. For example, if you’re working on dance music, EDM, or anything with a lot of deep, low-frequency content, a sub can help you hear what’s going on in the lower octaves, where a lot of that energy lives. If you want to hear how the bass and kick interact in the lowest frequencies, adding a sub allows you to hear what’s happening. Since you’re working in a small room, you want to keep the volume relatively low. Otherwise, you risk driving that room and setting off those modal frequencies.
If you use a sub, try to size it reasonably. KRK offers four different subs in the lineup to choose the right one for your space. If you’re using something like a pair of ROKIT 5s, an S8.4 sub would be well-matched. That will give you enough bass reinforcement to hear what’s going on in the bottom, and it’s less likely to overwhelm the room. For a slightly larger room that maybe has seven- or eight-inch nearfield monitors, you can go with a bigger sub―like the KRK S10.4.
For starters, you want to try to get your reference mixes and the mix you’re comparing it against at the same relative volume. This is another case where your SPL meter can come into play. This way, if one track seems less bassy, you’ll know it’s not because of a volume difference; it’s because there’s less bass.
One trick that I have is to use Spotify. I created a playlist with some of my favorite mix reference tracks that cover a lot of genres. If I’m working on a jazz project, I’ll reference those; if I’m working on rock, I can refer to my rock tracks. Having a variety of reference material is great because it gives you similar points you can compare against. Look for stuff that’s universally considered to be well-recorded and accurate sounding. I plug my phone straight into my monitor controller and adjust the volume so that the track I’m playing back is the same as the mixing track. I’ll move between different monitors or speakers in different environments―not just in my studio but also in my living room or car.
This gives me a reference point, especially when recording in an unfamiliar room. The goal is to try to make the mix “translate” so it sounds good on all playback systems―just like your reference tracks.
If your room is horrible, rent time at a local recording studio. That’s the quickest thing you can do.
In a good room, you can use the KRK App and an SPL meter to get a proper monitor setup―with the speakers in an equilateral triangle, equally spaced from each other and you. Don’t have everything against one wall in the room or the exact middle of it because that’s a point where things cancel out. The KRK App can also help ensure your monitors are in-phase.
When tracking things, use a small acoustic screen behind the mic. One of the cheapest things you can do is set up a makeshift vocal booth―get a couple of tall mic boom stands with the boom horizontal and raised (creating a T-shape), and drape thick blankets over them. Put that behind the vocalist. The combination of a mic shield and blankets will cut down on those room reflections and make the room sound a little less lively and bright. That’s a good trick, and it's relatively inexpensive to do something like that.
If you have the money for room treatments, start with four- to six-inch-thick compressed fiberglass corner bass traps. They can also be used in the wall-to-ceiling corners. Put some foam or fiberglass panels at the early reflection points on either side of you, and a bookcase or commercial diffusers on the wall behind you if the room is long (you don’t want diffusers close to you).
Lastly, as we discussed earlier, another important tip is to turn down the volume and monitor at a reasonable level (around 85 dB SPL). It is fun to slam, but that will worsen the acoustic issues. This will ensure you’ll hear more of the direct sound from the nearfield monitors and less of the sound bouncing around the rest of the room.
Managing Editor at Magnetic Magazine – Former Marketing Manager at the Hyperbits Masterclass – Writer, Content Strategist, Music Producer, and Record Label Manager
Professional Sound Engineers Explain Everything You Never Thought To Ask On Setting Up Monitors In A Bedroom Studio – Magnetic Magazine
The Best Work You May Never See: Forsman & Bodenfors, Director Laerke Herthoni Recharge For Volvo – SHOOT Online
View all video categories
After much anticipation, Olivia Wilde’s ” Don’t Worry Darling ” finally…
Martin McDonagh has returned to the Venice International Film Festival…
The high fives continued on the second night of the 2022 Creative Arts…
Brendan Fraser is having a moment at the Venice International Film…
Music was heard loud and clear during the first night of the Creative Arts…
View all video tags
By
385 views
The modern malady of low battery anxiety is examined in this spot, “The Chase,” for Volvo plug-in hybrid automobiles out of agency Forsman & Bodenfors in Sweden. Set to the classic and surprisingly fitting song ”Sinnerman” by Nina Simone, the commercial follows a family’s stressful yet humorous chase for battery life from morning to night, a quest to which we all can relate. With the dad as the main character, played by renowned Danish actor Thomas Hwan, we see his reactions to everything from his Zoom meeting getting suddenly disconnected to his daughter mischievously stealing his charger.
In-between this, we see the car’s charger getting plugged in and plugged out; a visual metaphor for all the gadgets in our lives in constant need of charging. In the end, we see that the mom has stolen the charger for their other car. Luckily, it’s not an issue, and they can still go on the trip as planned since the Volvo Recharge plug-in hybrids are ”electric cars with a backup plan” as the tag line reads.
”Since the stress of low battery anxiety is something almost everyone can relate to, we wanted to highlight this in a hectic but also fun and entertaining way,” said Karl Risenfors, Art Director at Forsman & Bodenfors.
Directed by Laerke Herthoni of production company new-land, the film is part of a global campaign where Volvo says that on the road towards an all-electric future, it’s not just about the number of electric cars, but the number of electric journeys we enable. And that with plug-in hybrids, you can make sure most of your drive is electric, but know that you’re covered for longer journeys too.
Client Volvo Car Corporation Agency Forsman & Bodenfors Sophia Lindholm, Karl Risenfors, Leo Dal, art directors; Hampus Elfström, copywriter; Lena Sellman, producer; Peter Gaudiano, PR/digital strategist; Martin Joelsson, Chanelle Kazemi, art designer. Production Company new-land Laerke Herthoni, director; Erik Torell, Therese Engberg, exec producer; Dea Saracevic, producer; Monika Lenczewska, DP. Editorial Johan Söderberg, Fredrik Åkerström, editors. Color Company 3 Simon Bourne, colorist. Online Swiss Post Production Sound Ballad Adrian Aurelius. Music Jenny Ring, music supervisor; Nina Simone, composer. Media Agency Mindshare
The Trusted Source For News, Information, Industry Trends, New ScreenWork, and The People Behind the Work in Film, TV, Commercial, Entertainment Production & Post Since 1960.
PRISM Project Producer Shogun /r/VirtualYoutuber AMA Highlights – Anime Trending News
The producer for the Vtuber agency PRISM Project, who goes by the alias of Shogun, held a reddit AMA on the /r/VirtualYotubers subreddit. The session focused on the PRISM Project’s ongoing auditions, the agency itself, and the VTuber industry as a whole. Here are some of the highlights.
User /u/AterisksAnonymous posed the following questions: “What do you want to see in an audition reel for new Vtubers? Do you want to see the auditionees talking about themselves more, or do you want to see snippets of their performance as well (in gaming, singing, or otherwise)?
Is having a second/third language still useful in VTubing even if you default to one of them for most of your streams/content in your opinion? Why/why not?
Do you think short-form content (Reels, YT Shorts, Tiktok) is useful for a VTuber’s growth in the long term? Would it be better than having longer but more high quality videos/stream highlights?”
User /u/themadmanazn asked “First two relate directly to the gen 5 audition form. First, there is no explicit section for a video, what was the decision rationale behind this? Second, in the gen 4 auditions there have been some level of theme reveals so talents can tailor their auditions and efforts to match the theme. What was the decision rationale to not doing that this time?
Additional two questions not directly related to the audition form. Third question, now that PRISM is part of Sony Music of Japan, will there be an emphasis on music related content? Fourth question, with PRISM becoming more established as a agency, is there a push/emphasis on pushing current talents or acquiring new talents who are able to be content creators full time?”
User /u/MrXeroh asked “I would like to ask what you are doing in support for the vtubers behind the scenes that you can talk about. What are some form of supports that helps with streaming, getting rights to stream games, advertisement of the company, and feedback for the vtubers to understand growth or positive reinforcement.”
User /u/Frosty_the_Turtle followed up with “Can you tell us a little about about what exactly a manager for a vtuber agency does behind the scenes? What does a day in the life of a vtuber producer look like?”
User /u/intensive_porpoises, who was interested in what goes on behind the scenes, asked: “What is the process like to ask for permissions, and how do you approach someone, when you are interested in using their work?
What kinds of things do you need to have prepared? (For example, is this something that requires a purchase? A lawyer?)
Are there certain types of media that are simpler or more complicated to receive permissions for? (For example, I’ve read that the Japanese music industry is rather strict and robust with how it handles music rights.)
On the subject of the industry, /u/TomoPulse asked “What do you think the VTubing industry will look like over the next ten years, and what do you think the biggest drivers for change will be?”
On the topic of clippers, /u/I_Kektor inquired “What kind of clips do you think are good for the agents of PRISM Project; as in, what would you hope to see more of from the fans?
I understand that there is a form to recommend clips for the official channel, but what is the process for choosing what gets used or not? Is there a checklist or is it on feeling?”
To see the full question and answers, check out the complete AMA on /r/VirtualYoutubers.
PRISM’s mission is to “create a world where all people on Earth can find something they love and feel happiness every single day.” Officially launched in January 2021 with three multilingual talents, the agency has cultivated twelve active talents worldwide. The talents include Iku Hoshifuri, Aoi Tokimori, Meno Ibuki, Rita Kamishiro, Luto Araka, Shiki Miyoshino, Nia Suzune, Yura Rikudou, Pina Pengin, Naki Kamizuki, Sara Nagare, and Non Anon. Primarily active on YouTube, PRISM talents stream a variety of content including singing, karaoke, gaming, art, and much more. Under the guidance of Sony Music, PRISM Project aims to support talents to explore their potential in voice acting, music production, online/offline events, and interacting with new digital technologies.
Bend Studio Shares Art That Adds Days Gone's Deacon To The Last of Us' Giraffe Scene – GameRant
Days Gone developer Bend Studio posts a gorgeous piece of art to celebrate The Last of Us Part 1’s release, adding Deacon to a key scene.
The Last of Us is full of iconic moments, though one of the most memorable of all is the giraffe sequence. Recently, Bend Studio paid tribute to this scene via a piece of art, with the post celebrating the launch of The Last of Us Part 1.
For those unfamiliar with Bend Studio’s work, the developer has delivered a handful of strong titles. Syphon Filter is one of those games, with the studio also delivering Uncharted: Golden Abyss for PS Vita. Most recently, it released Days Gone for the PlayStation 4, an interesting open world game with a loyal following. While Bend is hard at work on its next game, which will not be a sequel to Days Gone, the developer has still shared some art starring Deacon St. John.
The art in question, which was created by Bend Studio’s Senior Concept Artist Katie Scott, did not throw Deacon into his own Freaker-infested world. Instead, he was thrown into another post-apocalyptic universe full of zombie-like foes, as he is pictured standing near Joel and Ellie. With The Last of Us Part 1 only just releasing, Bend Studio’s art is perfectly timed, serving as a celebration of the award-winning title’s PlayStation 5 remake.
The scene Deacon is inserted into is one of the most iconic moments from the entire franchise, as he finds himself in the moment where Joel and Ellie spot a giraffe. With fans making art of The Last of Us’ giraffe scene for years, this piece is the latest of many renditions, though Deacon’s role instantly makes the piece stand out. As Ellie pets the giraffe just like she does in Naughty Dog’s modern classic, Joel can be seen looking off to his side. Deacon comforts him, with the biker placing his hand on Joel’s back,
Given the similarities between Days Gone’s world and the universe The Last of Us is set in, it makes sense that Deacon would have all the skill needed to survive fights against Clickers and Bloaters. With his trusty motorcycle, numerous weapons, and experience surviving against a similar threat, he would be a useful ally for Joel. Considering how both have suffered some devastating losses, they would likely have some common ground that could lead to a friendship sparking. Thinking about the conversation Deacon and Joel would have in this moment is interesting, making the piece even more special beyond its obvious beauty.
For those that enjoy this kind of crossover art, similar celebratory posts have been seen when other PlayStation exclusives have released, all of which can easily be found online. With God of War Ragnarok’s launch inching closer, similar PlayStation Studios art will likely appear in a few months’ time.
The Last of Us Part 1 is available now on PS5. A PC version is currently in development.
A lifelong gamer and comics fan who loves writing about everything in nerd culture… and has a small addiction to trophy and achievement hunting.
LSU Football | Free Live Streaming Audio – Louisiana State University Athletics
Tweets by LSUfootball
© LSU Athletics, Louisiana State University, 2022. All rights reserved. / Privacy Policy / Terms of Service / Brand Guidelines
JBL Tour Pro 2 arrives with a touchscreen on its charging case – TechNave

JBL always gets creative by bringing innovative solutions for its audio gadgets. Previously, the brand launched the world’s first pair of transformative earbuds, and we totally like the idea. A few days ago, it presented another unique earbuds idea, which charging case gets a touchscreen on the side.
The JBL Tour Pro 2 is a pair of high-end true wireless earbuds, offering features including active noise cancelling (ANC), switch to ambient mode, and even swapping between different EQ settings. In addition to a custom EQ, you can use the company’s improved Personi-Fi test to tune the buds to match your hearing, including compensating for any hearing loss.

However, the most interesting part of the earbuds would be the 1.45-inch LED touchscreen embedded in the charging case. One of the reasons that the company did that is most people don’t interact with the options much beyond the initial setup, as it could be troublesome to open the app sometimes. Therefore, with customisable controls on the case, users can decide which settings they need quick access to without picking up the phone. Other than that, some might still want to use the features when connected to a PC, and the JBL Tour Pro 2 still provides full control of your ANC and other options when users are not using it on their smartphones.
Although it sounds good to have a touchscreen on the charging case, there’s a restriction on this one. JBL mentions that there’s no way for users to use their own wallpapers on the touchscreen for now. Nevertheless, users could still change it using a selection of JBL-approved wallpapers. JBL blames this on problems with scaling for the low resolution of the screen, but look at the Samsung Galaxy Z Flip’s cover screen!
What do you think about the JBL Tour Pro 2? Leave a comment to let us know your thoughts, and stay tuned to TechNave.com for more tech news.
Rate & Review now via the TechNave APP and win yourself a branded new smartphone weekly.
Download the TechNave App Now: http://onelink.to/technave
- Follow the latest Tech News and Gadget Reviews
- Compare Gadget Specs
- Get the best Prices from Nearby Retail stores
- Win FREE smartphones from the weekly Giveaway.
Donwload now from:

When you buy a laptop, why are you buying it? For most of us, it’s the convenience of having a portable computer. Smartphones are the same, but there’s nothing like getting work done on a proper laptop.
Many Malaysians prefer Intel® laptops, and there are quite a few models under the Intel® Evo™ category. So, have you been looking for an Intel® Evo™ laptop without knowing what it actually is and who it would benefit? The short answer is – someone who needs a machine that’s as powerful as it is portable. For the longer answer and more details, do read on.
Home | Mobile Phone | iPad & Tablets | Cameras & Camcorders | News | Reviews
copyright © 2021 TechNave.com, a part of Media Prima Group. | About Us | Contact Us | Advertise Here | Privacy Policy | Mobile Site
Tuning of silicon nitride micro-cavities by controlled nanolayer deposition | Scientific Reports – Nature.com
Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 15074 (2022)
Metrics details
Integration of single-photon emitters (SPEs) with resonant photonic structures is a promising approach for realizing compact and efficient single-photon sources for quantum communications, computing, and sensing. Efficient interaction between the SPE and the photonic cavity requires that the cavity’s resonance matches the SPE’s emission line. Here we demonstrate a new method for tuning silicon nitride (Si3N4) microring cavities via controlled deposition of the cladding layers. Guided by numerical simulations, we deposit silicon dioxide (SiO2) nanolayers onto Si3N4 ridge structures in steps of 50 nm. We show tuning of the cavity resonance exceeding a free spectral range (FSR) of 3.5 nm without degradation of the quality-factor (Q-factor) of the cavity. We then complement this method with localized laser heating for fine-tuning of the cavity. Finally, we verify that the cladding deposition does not alter the position and spectral properties of nanoparticles placed on the cavity, which suggests that our method can be useful for integrating SPEs with photonic structures.
Integrated quantum photonic devices are critical elements for future quantum networks, quantum computers, and sensors1,2,3,4,5,6,7,8. One of the essential elements of such a device is a single-photon emitter (SPE), which is coupled to a high Q-factor cavity. Upon excitation of the SPE, the single photon is emitted in the cavity mode and then routed to an optical network for manipulation and detection9,10,11,12. Such an interface requires a nearly perfect matching of the emission line of the SPE with the resonance line of the cavity. Given the intrinsic uncertainty in the SPE emission line and the cavity’s resonances, their matching requires active tuning of the SPE and/or the cavity. While tuning the emission wavelengths of the SPE is possible, for example, by applying electric fields13,14,15, it is arguably more practical to tune the resonance line of the photonic cavity.
Methods of tuning micro-cavities include thermal and electro-optical tuning, application of mechanical stress, and post-fabrication trimming with functionalization of the surface or pattering of the cladding material16,17,18,19,20,21,22,23,24,25,26,27. Most of these methods allow accurate tuning of the cavity resonances with real-time control. However, they are not free from technical challenges. For example, thermal and electrical tuning require a significant amount of electrical power to be delivered into the chip, especially when broadband tuning across a full free spectral range (FSR) is required18,19,20,23,24,25,26. Moreover, in this case, the electrical contacts should be positioned next to the cavities, which complicates the fabrication process and might degrade the cavity performance18. Methods based on the deposition of a photochromic film or the functionalization with a laser addressable polyelectrolyte strongly depend on the thickness of the applied material, which is hard to control. These methods may also degrade the optical properties of the cavities due to surface modification16,17. Post-fabrication trimming of a cladding material requires precise patterning with electron beam lithography, and the cladding itself prevents efficient coupling to integrated SPEs27. Stress-based approaches require sophisticated fabrication and a large device size to tune across the full FSR21,22.
Silicon nitride (Si3N4, or SiN) stands out as a material of choice for many device prototypes due to its CMOS compatibility, broad transparency range, and relatively high refractive index (n ~ 2)28,29,30,31. However, the thermo-optic coefficient of Si3N4 is approximately one order of magnitude lower than for silicon32, which makes it challenging to implement thermal-based tuning strategies described above. Moreover, at cryogenic temperatures required to optimally operate many SPEs, the Si3N4 thermo-optic coefficient becomes even smaller.
In this work, we propose and realize a method for broadband tuning of Si3N4 cavities. It is based on depositing a silicon dioxide (SiO2) cladding of controlled thickness over Si3N4 cavities with tens of nanometers step size. We show that within the range of thicknesses of the cladding layer from 200 to 500 nm, we can tune the resonance position within one FSR of 3.5 nm. Although this method can only tune the resonance in relatively coarse steps, it can be complemented with other methods for fine tuning. Nevertheless, this method allows us to first bring the cavity resonances and SPE emission wavelength closer to a rough approximation, before fine-tuning with an another approach. To this end, we demonstrate fine tuning of the cavity by applying laser heat after depositing the SiO2 cladding. We also show that SiO2 deposition does not change the position and spectral properties of the SPEs (a diamond nanocrystal in our case) that were earlier placed on the ring cavity.
We consider a ridge waveguide with the lower and upper cladding being SiO2 and air, respectively. Figure 1a shows the cross-section of the ridge waveguide. The Si3N4 core has a refractive index of 2.087 (measured value at 737 nm) with width w, and height h = 250 nm. In this work, we consider two nominal design widths, w = 330 and 480 nm. The geometrical parameters of the waveguides are designed to support single-mode propagation for both TM and TE polarizations of light with low losses.
Distribution of SiO2 cladding around the Si3N4 waveguide. (a) Schematic of a ridge waveguide with lower and upper cladding being air and SiO2, respectively. (b) Schematic for theoretical consideration with an additional layer of SiO2 deposited. (c) A channel waveguide, with the upper and lower cladding being SiO2. (d) TEM cross-section of a w = 480 nm Si3N4 waveguide after depositing a t = 500 nm thick SiO2 cladding . (e) Measured dimensions of a w = 480 nm Si3N4 waveguide.
We assume that the deposition of SiO2 forms a layer with thickness t on top of the lower cladding layer and core layer, parallel to the x-axis. This is schematically shown in Fig. 1b. The normal line of the additional layer is parallel to y-axis. In reality, there will be a thin layer of SiO2 (with the normal line along the x-axis) surrounding the vertical edges of the core. However, a deterministic value for the thickness of such a layer is hard to obtain. Hence, it has been neglected in the theoretical model. The ridge waveguide (before deposition) represents t = 0, and another extreme t = ∞ represents a channel waveguide (Fig. 1c). The example of real distribution of SiO2 over Si3N4 waveguide is shown in Fig. 1d,e, (see “Device fabrication” section).
The waveguide optical properties as a function of t are obtained by solving the two-dimensional time-independent Maxwell’s equation33. In Fig. 2, we exhibit the optical mode profile of the waveguides (w = 480 nm) for t = 0 (ridge), t = 150 nm, and t = ∞, for both TE and TM polarizations. For TE polarization, the Ex and Hy components are dominant. On the other hand, for TM polarization, Ey and Hx are dominant. The contrast in refractive index between the upper cladding (air) and the core is larger than the contrast between the lower cladding (SiO2) and the core of the ridge waveguide. Therefore, the vertical symmetry is broken in the optical mode pattern. Moreover, the degree of mode penetration is higher in the lower cladding than in the upper cladding. As t increases, the upper cladding is modified, and the effective contrast in the refractive index is reduced. Consequently, the asymmetry decreases, and the degree of mode penetration in the upper cladding region increases. In the extreme case of t = ∞ (channel waveguide), the symmetry is restored.
Simulation results for the contour plots of the optical mode (H—field) for the waveguide with h = 250 nm, w = 480 nm. The red (blue) color represents the maxima (minima).
The effective refractive index is linked to the group refractive index ({n}_{g}(t)) by the following equation,
where (F(t)=d{n}_{text{eff}}(t)/dlambda).
If a microring cavity is constructed using a waveguide of effective refractive index ({n}_{text{eff}}left(lambda ,tright)), then the resonance frequency can be obtained from the resonance condition (m{lambda }_{res}={n}_{text{eff}}left(lambda ,tright)L), where (L=2pi R) is the round–trip length, and m is a positive integer34. Using this condition, it is straightforward to express ({lambda }_{res}(t)) using Eq. (1) as
Figure 3a,b show ({lambda }_{res}left(tright)) calculated for values of m that most closely match the experimental data (see the experimental section below). From these figures we can see that the changes in ({lambda }_{res}left(tright)) are large and small for small and large t, respectively. Therefore, a logistic curve would give a best and representative estimate for the evolution of ({lambda }_{res}left(tright)). The fitting to a logistic curve can be easily done using a single layer neural network with a sigmoid transfer function, and trained it with data points generated by Eq. (2). The neural network model is employed for a better generalization, and to avoid overfitting35. With this formalism, for the range of t considered here, we find that ({lambda }_{res}left(tright)) can be well approximated by the relationship
where B and a are positive constant coefficients. The fitted values of B and a are tabulated in Table 1. For large t, ({lambda }_{res}left(tright)={lambda }_{infty }); for small t, using Taylor expansion we have ({lambda }_{res}left(tright)={lambda }_{infty }-frac{B}{2}+frac{aB}{4}t+dots). Clearly, the cavity resonance wavelength varies linearly for small t, and eventually saturates as t increases. This asymptotic behaviour is true for any mode order m.
Theoretically estimated resonance wavelengths of the ring cavity (radius R = 8 µm) for waveguide widths (a) w = 330 and (b) w = 480 nm, respectively. Circles are obtained from Eq. (2), while the solid lines are fits given by Eq. (3).
We fabricated Si3N4 micro-cavity devices consisting of ring cavities (radius R = 8 µm) coupled to straight bus waveguides with the same height h = 250 nm and width w = 330 nm or 480 nm. The gap between the bus and the ring is 160 nm, which is close to the critical gap of the ring cavity that maximizes the bus–cavity coupling. For the efficient coupling of light from a lensed optical fiber, each waveguide has tapered edge couplers (minimum width 150 nm) for the efficient transformation of the TEM00 mode of the lensed fiber to propagating modes of the Si3N4 waveguide.
The fabrication started at a commercial CMOS foundry with a standard 8-in. silicon wafer. A 3.1 µm-thick SiO2 layer and a 250 nm-thick Si3N4 were formed using the thermal oxidation and low-pressure chemical vapor deposition (LPCVD) method. Before deposition of the Si3N4 layer, chemico-mechanical polishing (CMP) was used to reduce the thickness of the SiO2 to 3 µm. Then 248 nm KrF deep ultraviolet (DUV) lithography and inductively coupled plasma (ICP) etch were used to define the Si3N4 waveguides and ring resonators. This was followed by the upper cladding deposition of 3.4 µm-thick SiO2 via plasma-enhanced chemical vapor deposition (PECVD). To expose the Si3N4 ring resonators to the air, a window was opened in the upper cladding layer of SiO2 using lithography and a combination of dry etch (3.1 μm) and wet etch (0.3 μm). The edge coupler for light coupling with fiber was fabricated by the deep etch of the cladding and Si substrate to realize a trench.
The layers of SiO2 cladding were deposited in steps of 50 ± 5 nm by ICP-CVD Oxford PlasmaPro System 100 in SiH4 and N2O atmosphere at 4 mTorr pressure, 150 °C temperature, and 1000 W ICP power. To ensure the thickness accuracy of the cladding layers, each deposition was preceded by calibration measurements, where SiO2 was deposited on a blank target and studied under an ellipsometer (J.A. Woollam V-VASE). After each deposition, we measured the cavity resonance wavelengths in our experimental setup. The accuracy of SiO2 deposition, its distribution around the waveguide and the cavity were studied via cross-section transmission electron microscope (TEM) images (Fig. 1d,e).
High-pressure high-temperature (HPHT) nanodiamonds containing silicon-vacancy (SiV) centers36 were suspended in isopropanol (0.1 wt%), ultrasonicated for 30 min, then randomly deposited on the device by spin-coating at 2000 rpm for 5 min. Under scanning electron microscope (SEM) imaging, we find that approximately 30% of the Si3N4 cavities had nanodiamonds deposited directly on top of them.
We performed measurements at wavelengths of around 737 nm by probing the chip with laser light. It was coupled to the waveguide by a lensed fiber (Oz Optics), and the transmitted light was collected with a 50× objective lens (Olympus) at an opposite edge of the chip, see Fig. 4. We first used attenuated broadband femtosecond (80 fs) laser pulses (Mai Tai, SpectraPhysics) as the input, coupled the transmitted signal to a single-mode fiber, and sent it to an optical spectral analyzer (OSA, Yokogawa AQ6370) with a spectral resolution of 37 pm in the visible range. With its spectral width of over 10 nm, the fs-pulses covered several resonances and allowed a fast estimation of the resonance position. The precise measurement of resonances is then performed by a narrowband (linewidth < 1 MHz) tunable continuous-wave (CW) diode laser (Sacher). We sweep the laser wavelength in the vicinity of the resonance and measure the light intensity passing through the cavity using an optical power meter (Thorlabs) placed after the objective lens. The wavelength of the tunable laser was measured by a wavelength meter (HighFinesse, Model WS-7) with an accuracy of 60 MHz and resolution of 2 MHz. This allowed us to measure the quality factor and fine shifts of the resonance. The devices were placed on a metallic mount which served as an effective heat sink. The ambient temperature fluctuation range was within 0.5 °C over the course of the measurements, within which we did not observe any shift of resonant lines. The experimental data was acquired and post-processed at the PC using self-written software in Python.
Sketch of the experimental setup: light from broadband fs laser or tunable CW laser is coupled to the lensed fiber. Lensed fiber injects the light into the Si3N4 micro-cavity device. At the output of the device the transmitted light is collected and collimated with 50 × objective (Objective 1). Then the light is sent either to the photodetector (for tunable CW laser) or to the optical spectral analyzer (OSA) via a single-mode fiber (for fs laser). The 532 nm pump laser is focused onto the micro-cavity device by 100 × objective (Objective 2) for confocal and heating measurements.
A scanning confocal microscope integrated into the test setup was used to measure the fine resonance shift under the laser heating, as well as the spectra of SiV centers in the nanodiamonds before and after SiO2 deposition. The 532 nm pump laser was scanned using a fast steering mirror (Newport FSM-300) and projected with a 4f lens system to a 100× objective (NA = 0.9, Nikon), which focused the beam onto the chip. The focused spot size was measured to be 500 nm with a knife blade mounted on a piezo stage (Thorlabs NanoMax Max311). The emission was collected by the same 100× objective, and coupled to a single mode fiber (SMF). The signal from SMF was sent either to an avalanche photodetector (PerkinElmer SPCM-AQRH-14FC) to obtain the confocal scan map, or to a spectrometer equipped with an EMCCD camera (Princeton Instruments, 1200 Grooves/mm).
To apply laser heating experiment, the confocal scan map was used to direct the focused 532 nm laser onto the cavity. The tunable CW laser was swept to measure the shift of the cavity resonance. The position of the beam spot was optimised by moving it across the ring cavity in steps of 400 nm to get the largest resonant line shift.
For the measurements of SiV spectra, the confocal scan map was used to locate nanodiamonds containing SiV on the cavities. Using a 532 nm pump power of 0.4 mW, the SiV photoluminescence was collected via the confocal microscope and sent to the spectrometer, where the collected signal was automatically digitized by the included software (LightField).
For very thin layers deposited onto the cavity, we cannot precisely characterize the resonance shift, as it is larger than one (FSR={lambda }^{2}/(2pi {n}_{text{eff}}R)). The measured Q-factor is on the order of 104, which we confirm to be unaffected by the deposition of the cladding layers, see Supplementary Fig. S1. Starting from some finite thickness of SiO2 layer (200 nm in our case), the resonance shift stays within one FSR, and we can track it within the same order (m in Eq. 2). Figure 5 shows the experimentally measured shifts of resonance wavelengths and their theoretical fits as a function of t. The theoretical curves are obtained by averaging the numerical derivatives of the respective numerical fits of the two modes in Fig. 3a,b (see Table 1 for the parameters of the fits). We obtain a generally good agreement between the theoretical predictions and experimental measurements; the observed discrepancies are due to uncertainties in material properties as well as some constraints of the theoretical model. For example, it does not include a thin SiO2 layer deposited around the vertical edges of the core (with the normal of the layer parallel to x-axis, see Fig. 1). Therefore, a good numerical agreement can be obtained by considering the amount of tuning after every increment in the thickness.
Experimental results for tuning the resonance wavelength as a function of additional SiO2 layer thickness. The experimental points are plotted as green crosses, while solid lines represent theoretical curves. Red and blue colors represent TM and TE polarizations, respectively.
A resonance shift of up to 1.5 nm can be obtained when one increases the thickness from 250 to 300 nm (w = 330 nm, TE polarization), while every additional layer of SiO2 leads to a decreasing shift in the resonance (see Fig. 5). Devices with a smaller width (w = 330 nm) experience a larger shift as they have optical modes with weaker confinements, and thus are more susceptible to modifications of their refractive index environment.
While the tuning with SiO2 cladding can strongly shift the cavity resonance, the tuning is not very accurate, i.e. it is difficult to exactly match the measured wavelength with the desired theoretically predicted value. We suggest that our method could be complementary to other methods for fine-tuning: depositing the SiO2 cladding brings the resonance close to the desired wavelength, and precise tuning can then be achieved by other methods. This two-step approach can be useful when tuning requires significant power consumption and/or heat dissipation. One particular scenario is when cavities with nanoparticles containing SPEs are used at cryogenic temperatures. The heat produced by the chip can degrade the properties of SPEs, for example, by causing the drift or broadening of the emission line.
We demonstrate this two-step tuning approach by first depositing a 300 nm cladding, then heating the cavity with the 532 nm pump laser in the confocal microscopy setup. By adjusting the laser power, we can precisely tune the resonant frequency line of the cavity within the range of 12 pm, see Fig. 6. We assume that some inaccuracy in the measurements may occur due to the instability of the tunable laser used to measure resonance line profiles, which has limited mode-hop-free tuning range. We verified that the resonance shifts can be attributed to the laser heating by blocking the laser heating beam, which immediately resulted in the return of resonant line to the initial position. We note that the shifts are due to absorption of the heating laser by the SiO2 cladding, as we do not observe any shifts with an exposed Si3N4 cavities, i.e. before SiO2 cladding. We note that even though both SiO2 and Si3N4 have approximately the same thermo-optic coefficient, SiO2 has an order of magnitude smaller thermal conductivity, which we assume would help to localize the heat at the vicinity of the cavity37. To further verify that the laser-induced heating is localised, we moved the laser spot 2 µm away from the cavity. We observed that the cavity resonance line returns to the initial position (without laser heating). Thus we demonstrate that the cavity can be fine-tuned using the combination of cladding deposition and localized laser heating.
Experimental tuning of the resonance wavelength for Si3N4 ring cavity clad with 300 nm of SiO2 by local heating with 532 nm laser. (a) Spectral profiles of the cavity resonances for different laser powers; (b) the dependence of reversible shift of the central resonance wavelength on applied pump powers of heating 532 nm laser. The red dotted line is a fit indicating the linear dependence of the refractive index (tuning) on temperature.
We note that we cannot directly determine the heating efficiency; using a simplified assumption that all the laser power is transformed into heat without any losses, we obtain a fine-tuning rate of ~ 0.36 nm/W, i.e. ~ 0.1 FSR per W. Although this is an order of magnitude lower than for cavities with integrated heaters26,32, it is sufficient for cavity fine-tuning, and is achievable without the additional fabrication complexity of integrated heaters. However, in practice, SiO2 is almost transparent at 532 nm wavelength. To increase the heating efficiency, and hence the tuning rate, we could use UV lasers with a wavelength shorter than 350 nm, where the SiO2 absorption is much stronger.
Integration of nanoparticles hosting SPEs with photonic platforms is one of the main targets for the successful realization of quantum photonics. We demonstrate that depositing a 500 nm SiO2 cladding does not significantly affect the positioning of nanodiamonds deposited by spin-coating on top of the ring cavities. By comparing Scanning Electron Microscope (SEM) images taken before and after cladding, we find that the position of nanodiamonds does not change within the resolution of the SEM, see Fig. 7a,b. We also verified that the SiV emission from the nanodiamonds do not undergo significant changes in brightness or the spectral properties, Fig. 7c,d. This shows that our tuning method is suitable for photonic cavities with integrated nanoparticles.
Nanodiamonds before and after SiO2 deposition of 500 nm thickness. Position of nanodiamonds placed on top of Si3N4 ring cavity studied under SEM before (a) and after (b) deposition by spin-coating. Spectral properties of two different nanodiamonds (c and d) before (black) and after (red) SiO2 deposition obtained in the measuremnts with confocal microscope setup.
We demonstrate a technique for broadband tuning of Si3N4 microring cavities. The method is based on the deposition of SiO2 nanolayers onto the cavities, combined with localized laser heating. Experimental results show good agreement with the theoretical predictions.
The ability to tune the cavity resonance without significant heat dissipation can be important for quantum photonic applications that operate at cryogenic temperatures. In contrast to the application of photochromic or polyelectrolyte films, we do not observe the degradation of the Q-factor. Furthermore, we verify that nanoparticles placed on the cavity are not displaced by the deposition of the cladding, and that their spectral properties do not change.
Our technique can be helpful for small-volume, high Purcell-factor cavities with large FSR, where cavity tuning of up to several nanometers can be required. This will be a valuable addition to the toolkit for developing integrated quantum photonic devices.
Data may be obtained from the authors upon reasonable request.
Reed, G. T. Device physics: The optical age of silicon. Nature 427, 595–596 (2004).
ADS CAS Article Google Scholar
Jalali, B. Teaching silicon new tricks. Nat. Photonics 1, 193–195 (2007).
ADS CAS Article Google Scholar
O’Brien, J. L. Optical quantum computing. Science 318, 1567–1570 (2007).
ADS CAS Article Google Scholar
O’Brien, J. L., Furusawa, A. & Vučković, J. Photonic quantum technologies. Nat. Photonics 3, 687–695 (2009).
ADS CAS Article Google Scholar
Kimble, H. J. The quantum internet. Nature 453, 1023–1030 (2008).
ADS CAS Article Google Scholar
Wang, J. et al. Multidimensional quantum entanglement with large-scale integrated optics. Science 360, 285–291 (2018).
ADS MathSciNet CAS Article Google Scholar
Qiang, X. et al. Large-scale silicon quantum photonics implementing arbitrary two-qubit processing. Nat. Photonics 12, 534–539 (2018).
ADS CAS Article Google Scholar
Lee, J. et al. Integrated single photon emitters. AVS Quantum Sci. 2, 031701 (2020).
ADS Article Google Scholar
Kim, J.-H., Aghaeimeibodi, S., Carolan, J., Englund, D. & Waks, E. Hybrid integration methods for on-chip quantum photonics. Optica 7, 291–308 (2020).
ADS CAS Article Google Scholar
Elshaari, A. W., Pernice, W., Srinisavan, K., Benson, O. & Zwiller, V. Hybrid integrated quantum photonic circuits. Nat. Photonics 14, 285–298 (2020).
ADS CAS Article Google Scholar
Yanikgonul, S. et al. Integrated avalanche photodetectors for visible light. Nat. Commun. 12, 1834 (2021).
ADS CAS Article Google Scholar
Alagappan, G., Krivitsky, L. A. & Png, C. E. Diamond in a nanopocket: A new route to a strong Purcell effect. ACS Omega 3, 4733–4742 (2018).
CAS Article Google Scholar
Hoang, T. B. et al. Widely tunable, efficient on-chip single photon sources at telecommunication wavelengths. Opt. Express 20, 21758–21765 (2012).
ADS Article Google Scholar
Schwarz, S. et al. Electrically pumped single-defect light emitters in WSe2. 2D Mater. 3, 025038 (2016).
Article Google Scholar
Mendelson, N. et al. Engineering and tuning of quantum emitters in few-layer hexagonal boron nitride. ACS Nano 13, 3132–3140 (2019).
CAS Article Google Scholar
Piegdon, K. A. et al. All-optical tunability of microdisk lasers via photo-adressable polyelectrolyte functionalization. Opt. Express 20, 6060–6067 (2012).
ADS CAS Article Google Scholar
Faraon, A. et al. Local tuning of photonic crystal cavities using chalcogenide glasses. Appl. Phys. Lett. 92, 043123 (2008).
ADS Article Google Scholar
Shainline, J. M., Fernandes, G., Liu, Z. & Xu, J. Broad tuning of whispering-gallery modes in silicon microdisks. Opt. Express 18, 14345–14352 (2010).
ADS CAS Article Google Scholar
Shen, Y., Divliansky, I. B., Basov, D. N. & Mookherjea, S. Electric-field-driven nano-oxidation trimming of silicon microrings and interferometers. Opt. Lett. 36, 2668–2670 (2011).
ADS CAS Article Google Scholar
von Klitzing, W., Long, R., Ilchenko, V. S., Hare, J. & Lefèvre-Seguin, V. Frequency tuning of the whispering-gallery modes of silica microspheres for cavity quantum electrodynamics and spectroscopy. Opt. Lett. 26, 166–168 (2001).
ADS Article Google Scholar
Niu, N. et al. A full free spectral range tuning of p-i-n doped gallium nitride microdisk cavity. Appl. Phys. Lett. 101, 161105 (2012).
ADS Article Google Scholar
Hosseini, N. et al. Stress-optic modulator in TriPleX platform using a piezoelectric lead zirconate titanate (PZT) thin film. Opt. Express 23, 14018–14026 (2015).
ADS CAS Article Google Scholar
Zhang, M. et al. Synchronization of micromechanical oscillators using light. Phys. Rev. Lett. 109, 233906 (2012).
ADS Article Google Scholar
Ding, L. et al. Wavelength-sized GaAs optomechanical resonators with gigahertz frequency. Appl. Phys. Lett. 98, 113108 (2011).
ADS Article Google Scholar
Dong, P. et al. Thermally tunable silicon racetrack resonators with ultralow tuning power. Opt. Express 18, 20298–20304 (2010).
ADS CAS Article Google Scholar
Lee, B. S. et al. On-chip thermo-optic tuning of suspended microresonators. Opt. Express. 25, 12109–12120 (2017).
ADS CAS Article Google Scholar
Atabaki, A. H., Eftekhar, A. A., Askari, M. & Adibi, A. Accurate post-fabrication trimming of ultracompact resonators on silicon. Opt. Express 21, 14139–14145 (2013).
ADS CAS Article Google Scholar
Moss, D. J., Morandotti, R., Gaeta, A. L. & Lipson, M. New CMOS-compatible platforms based on silicon nitride and Hydex for nonlinear optics. Nat. Photonics 7, 1749–4885 (2013).
Article Google Scholar
Bauters, J. F. et al. Ultra-low-loss high-aspect-ratio Si3N4 waveguides. Opt. Express 19, 3163–3174 (2011).
ADS CAS Article Google Scholar
Li, Q. et al. Vertical integration of high-Q silicon nitride microresonators into silicon-on-insulator platform. Opt. Express 21, 18236–18248 (2013).
ADS Article Google Scholar
Gondarenko, A., Levy, J. S. & Lipson, M. High confinement micron-scale silicon nitride high Q ring resonator. Opt. Express. 17, 11366–11370 (2009).
ADS CAS Article Google Scholar
Elshaari, A. W., Zadeh, I. E., Jöns, K. D. & Zwiller, V. Thermo-optic characterization of silicon nitride resonators for cryogenic photonic circuits. IEEE Photonics J. 8, 2701009 (2016).
Article Google Scholar
Fallahkhair, A. B., Li, K. S. & Murphy, T. E. Vector finite difference modesolver for anisotropic dielectric waveguides. J. Lightwave Technol. 26, 1423–1431 (2008).
ADS CAS Article Google Scholar
Bogaerts, W. et al. Silicon microring resonators. Laser Photonics Rev. 6, 47–73 (2012).
ADS CAS Article Google Scholar
Alagappan, G. & Png, C. E. Deep learning models for effective refractive indices in silicon nitride waveguides. J. Opt. 21, 035801 (2019).
ADS CAS Article Google Scholar
Choi, S. et al. Varying temperature and silicon content in nanodiamond growth: Effects on silicon-vacancy centres. Sci. Rep. 8, 3792 (2018).
ADS Article Google Scholar
COMSOL material library.
Download references
We thank Valery A. Davydov from L.F. Vereshchagin Institute for High Pressure Physics RAS and Viatcheslav N. Agafonov from Universite F. Rabelais for the provided nanodiamonds.
We acknowledge the funding support from the Agency for Science, Technology and Research, Singapore (#21709) and the National Research Foundation, Singapore (Grant No. NRF-CRP14-2014-04).
Institute of Materials Research and Engineering, Agency for Science, Technology, and Research (A*STAR), 2 Fusionopolis Way, #08-03 Innovis, Singapore, 138634, Singapore
Dmitry A. Kalashnikov, Nelson Lim, Victor Leong & Leonid A. Krivitsky
Institute of High Performance Computing, Agency for Science, Technology, and Research (A*STAR), Fusionopolis, 1 Fusionopolis Way, #16-16 Connexis, Singapore, 138632, Singapore
Gandhi Alagappan & Ching Eng Png
Institute of Microelectronics, Agency for Science, Technology, and Research (A*STAR), 2 Fusionopolis Way, #08-02 Innovis, Singapore, 138634, Singapore
Ting Hu
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
D.A.K., G.A. and L.A.K. jointly conceived the idea of the experiment. G.A. and C.E.P. designed the optical devices. T.H. and N.L. fabricated the samples. D.A.K. and V.L. built the chip characterization setup and conducted optical measurements. G.A. and D.A.K. analysed the experimental data. D.A.K. wrote the first draft of the manuscript with the contributions of all co-authors. D.A.K., G.A. and L.A.K. coordinated the project.
Correspondence to Dmitry A. Kalashnikov.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Kalashnikov, D.A., Alagappan, G., Hu, T. et al. Tuning of silicon nitride micro-cavities by controlled nanolayer deposition. Sci Rep 12, 15074 (2022). https://doi.org/10.1038/s41598-022-19255-9
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-19255-9
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Advanced search
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.
Stock Market Today: Dow, S&P Live Updates for Sept. 2 – Bloomberg
Bloomberg Daybreak Middle East. Live from Dubai, connecting Asian markets to the European opens. The show will focus on global macro issues with a middle eastern context, provide expert analysis of major market moving stories and speak with the biggest newsmakers in the region.
Simulcast of Bloomberg Television
We take a look at an electric-powered surfboard, and then ponder the threat posed to marine wildlife by plastic in the world’s oceans. And last, we show you how to make your own high-quality wooden board.
China’s Energy Giants Sell Gas to World Scrambling for Supply
Above-Target Philippine Inflation Keeps Door Open for Rate Hikes
UK Consumer Spending Slows as Spike in Energy Bills Looms
Just How Bad Is the Economy Getting in China?
UK’s Crypto Future in Limbo as Truss Wins Prime Minister Race
PMI Weighs Lowering Swedish Match Acceptance Threshold
Claim of TikTok Breach Spotlights Viral App’s Lure as Target
French Bid to Counter Netflix Threat Falters on Antitrust Rules
Ex-Militant Tapped to Protect Nigerian Pipelines He Once Blew Up
China Delays Key Annual Financial Forum Amid Covid Flare-Up
Adani’s Rise to World’s Third Richest Hinges on Lofty Valuations
Fortune of Jailed Chinese Billionaire’s Family Survives in Exile
Nadal’s 22-Match Slam Winning Streak Ends With Loss to Tiafoe at US Open
Judge Connects Again, Hits MLB-best 54th HR, Yanks Top Twins
A New Chinese EV Battery Giant Has Emerged
Japan’s Play-It-Safe Prime Minister Is Living Dangerously
The Yuan’s Slide Is Too Big for Beijing to Stop
Startup Wants to Chart Path to More Equitable Urban Development
The ESG Crown Is Slipping, and It’s Mostly the Fund Industry’s Own Fault
A New Contaminant Found in Popular Drugs Could Cost Big Pharma Millions
Chicago Receives Another 50 Migrants Sent By Bus From Texas
Arsenic Found in Tap Water of NYC Public Housing Complex
Typhoon Passes South Korea Leaving Trail of Floods and Outages
Typhoon Batters S. Korea With 3 Feet of Rain, Damaging Winds
Urban Migration Slows in 2022 for Many Major US Cities
Stockholm’s ‘Housing for All’ Is Now Just for the Few
A Ring of Empty Pedestals Marks the Lack of Women in Copenhagen’s Public Art
Crypto Traders See Escape From Tightest Range in About Two Years
Binance Will Convert Users’ USDC Into Its Own Stablecoin
Bitcoin Finds Relief From a Past Record High in 2017
Elaine Chen
US stocks suffered a third weekly loss after jobs data did little to alter views on the Federal Reserve’s next policy move.
The S&P 500 contended with its longest weekly losing streak since mid-June, as the central bank’s hawkish chorus grew louder in recent days. The index also ended Friday lower, erasing the gains it notched earlier in the session after the jobs report showed some signs of easing in a still-tight American labor market. A delay in the opening of a key gas pipeline to Europe bruised sentiment in the afternoon, ahead of a three-day weekend for American markets.
Immersive Sound: What Can Brands Do? | LBBOnline – Little Black Book – LBBonline
Immersive Sound: What Can Brands Do? | LBBOnline Little Black Book – LBBonline
source
Naqada Music Workshops Aims to Revolutionize the MENA Music Scene – EIN News
There were 1,003 press releases posted in the last 24 hours and 229,455 in the last 365 days.
These workshops are curated for musicians, music enthusiasts, and anyone seeking knowledge about the music industry.
Naqada Music Management
Naqada Music Management
+20 115 053 5735
[email protected]
You just read:
EIN Presswire’s priority is source transparency. We do not allow opaque clients, and our editors try to be careful about weeding out false and misleading content. As a user, if you see something we have missed, please do bring it to our attention. Your help is welcome. EIN Presswire, Everyone’s Internet News Presswire™, tries to define some of the boundaries that are reasonable in today’s world. Please see our Editorial Guidelines for more information.
Follow EIN Presswire
© 1995-2022 Newsmatics Inc. dba EIN Presswire
All Right Reserved.
Anne Heche was inside a burning house for 45 minutes after the accident, audio recordings reveal – Marca
Editions:
En/lifestyle/celebrities
The actress died last August 12
For 45 minutes, actress Anne Heche was trapped in the Los Angeles home she crashed her Mini Cooper into as it caught fire, records reveal.
Page Six details that NBC4 on Thursday released time-stamped audios of the Los Angeles Fire Department’s response after the fatal crash occurred in the Mar Vista neighborhood.
Deputy Chief Richard Fields said of the incident, “Given the intense fire and smoke conditions, the interior of the vehicle could not be clearly seen or clearly accessed.”
Recordings reveal that the LAFD arrived at 11:01 a.m. last Aug. 5 and realized within seconds that a person was “trapped inside the vehicle,” although Fields clarified that the dispatcher was referring to Lynne Mishele, the homeowner.
At 11:18, firefighters thought there were no more victims to rescue, while the actress was seen seven minutes later “pushed to the ground” and “inaccessible” in her car.
“The person in the vehicle was not in the driver’s seat, but on the floor of the passenger seat,” Fields clarified.
It was not until 11:49 that Heche was removed alive from her car and subsequently “assessed” and “loaded” onto a stretcher.
Days later it was learned that the actress was driving under the influence of cocaine at the time of the accident, after the Los Angeles Police Department obtained a warrant to test Heche’s blood.
Following the accident , the “Six Days, Seven Nights” star went into a coma, and on August 11 her representative revealed that the actress had “suffered a severe anoxic brain injury” and was “not expected to survive.”
© Unidad Editorial Información Deportiva, S.L.U. All rights reserved.
Follow us
New this week: John Legend, 'Serpent Queen' and 'Pinocchio' – Bay News 9
Get the best experience and stay connected to your community with our Spectrum News app. Learn More
Continue in Browser
Get hyperlocal forecasts, radar and weather alerts.
Please enter a valid zipcode.
Save
Here’s a collection curated by The Associated Press’ entertainment journalists of what’s arriving on TV, streaming services and music platforms this week.
MOVIES
— A race between two “Pinocchio” films begins with Robert Zemeckis’ adaptation ahead of Guillermo del Toro’s by a nose. On Thursday, Zemeckis’ animated fantasy of the classic Italian fable will premiere on Disney+. Next month, Del Toro’s stop-motion “Pinocchio” will debut at the London Film Festival and eventually land on Netflix on Dec. 9. For now, we have Zemeckis’ take on the old tale with Tom Hanks as the voice of Geppetto and Cynthia Erivo as the Blue Fairy.
— A trio of the summer’s biggest box-office hits are landing on streaming platforms. On Thursday, Taika Waititi’s whimsically deconstructive “Thor: Love and Thunder" arrives on Disney+. The 29th film in the Marvel cinematic universe, and possibly the Marvel movie most distinctively the work of its filmmaker, “Love and Thunder” follows-up Waititi’s “Thor: Ragnarok.” In his review the AP’s Mark Kennedy wrote: “If you thought that was bananas filmmaking, its sequel is the whole fruit basket.”
— “Jurassic World: Dominion” (Peacock) and “Elvis” (HBO Max) are also streaming. Colin Trevorrow’s “Dominion,” which has nearly grossed $1 billion at the box office, is available in both its theatrical cut and and an extended edition with 14 more minutes and an alternative ending. In her review, AP Film Writer Lindsey Bahr praised some of its sequences but called the sixth film in the franchise "a chaotic mishmash on an epic scale." Baz Luhrmann’s carnivalesque Elvis Presley biopic, starring breakthrough actor Austin Butler and Tom Hanks, also doesn’t skimp on scale. In her review, Bahr called it “gloriously messy — a maximalist opera of contradictions, styles, truths, myths, memories and headlines.”
— AP Film Writer Jake Coyle
MUSIC
— John Legend isn’t taking the easy route with his eighth studio album. “Legend” is a massive 24-song double album with the new EGOT honoree collaborating with Rick Ross, Jazmine Sullivan, Jada Kingdom, Rapsody, Ledisi, Jhene Aiko, Ty Dolla $ign and more. Initial singles on the Friday release point to a light, dance beat: The super-sexy, sticky “Honey” with Muni Long, the funky “Dope” with rapper JID and the retro, roller disco jam “All She Wanna Do” featuring Saweetie, with one of the cutest videos ever as the two performers surprise auditioning dancers.
— Now for something a little different: Kane Brown’s third studio album, “Different Man,” is out Friday. It will feature 17 songs, including singles “Like I Love Country Music,” “Whiskey Sour,” “One Mississippi,” “Leave You Alone” and “Grand,” an expertly crafted hip-hop-country melding with happy lyrics: “Remember when I couldn’t stand it?/Now I got the posture.” Look for two duets — “Different Man,” with Blake Shelton and Brown’s wife, Katelyn, on “Thank God.” “Different Man” represents the first time Brown co-produced one of his albums.
— With “Nut,” KT Tunstall finishes a trilogy of albums she began recording and releasing in 2016 with “Kin” and then “Wax.” The trio explore the three existential parts of ourselves, first the spirit, then the body and now with “Nut,” the mind. One of the singles from the new album, “I Am The Pilot,” is a terrific synth-driven tune that nicely represents what she wanted to do with a mind-orientated album: lean into rhythm. The Scottish Tunstall burst onto the music scene in 2004 with her multi-platinum debut, “Eye to the Telescope,” which spawned the global hits “Black Horse and the Cherry Tree” and “Suddenly I See.”
— Ozzy Osbourne has tapped some of the best guitarists on the planet for his latest solo album, “Patient Number 9” — guys like Eric Clapton, Jeff Beck, Mike McCready, Zakk Wylde and former Black Sabbath band member Tony Iommi. Beck lends his axe skills for the rocking title track, in which Ozzy sings: “If there’s a God, why’d he let the Devil do his work on me?/If there’s a God, what am I doing here?” Others aboard for this Ozzfest are Red Hot Chilli Pepper drummer Chad Smith, Metallica’s Rob Trujillo, Guns N’ Roses bassist Duff McKagan and Foo Fighters’ late drummer Taylor Hawkins.
— AP Entertainment Writer Mark Kennedy
TELEVISION
— Adventure athletes are the stars of “Edge of the Unknown with Jimmy Chin,” debuting Monday, on the National Geographic channel (on Disney+ starting Wednesday, Sept. 7.) The 10-part series details the risks, rewards and mindset of such athlete, kicking off with back-to-back episodes on rock climber Alex Honnold of “Free Solo” documentary fame and big mountain skier Angel Collinson. Filmmaker Jimmy Chin, a pro climber and skier who’s featured in an episode, is executive producer with E. Chai Vasarhelyi. They directed the Oscar-winning “Free Solo.”
— Catherine de Medici, the Italian-born, 16th-century French queen with a fierce reputation, owns the spotlight in Starz’ edgy “The Serpent Queen.” Samantha Morton (“The Walking Dead”) stars as the adult Catherine, with Liv Hill seen in flashbacks as the teenager destined to become the wife of one French king and the influence-wielding mother of three others. Colm Meaney, Kiruna Stamell and Rupert Everett are part of the ensemble cast of the eight-part series debuting Sunday, Sept. 11, on Starz’s streaming platforms (and on the Starz channel).
— Susan Sarandon and Trace Adkins play country music royalty in Fox’s new drama “Monarch, ” but their dynasty is in danger of toppling. Anna Friel, Joshua Sasse and Beth Ditto co-star as the couple’s offspring, with an impressive back-up chorus dropping in: Shania Twain, Martina McBride, Little Big Town and Tanya Tucker are among the guest stars on the series debuting Sunday after Fox’s NFL telecast. “Monarch” settles into its regular 8 p.m. EDT Tuesday slot beginning Sept. 20.
— AP Television Writer Lynn Elber
___
Catch up on AP’s entertainment coverage here: https://apnews.com/apf-entertainment.
Copyright 2022 The Associated Press. All rights reserved. This material may not be published, broadcast, rewritten or redistributed without permission.
Murdaugh defense says state has recordings from just before killings – Live 5 News WCSC
CHARLESTON, S.C. (WCSC) – Alex Murdaugh’s defense team says prosecutors have audio and video recordings taken a short time before Murdaugh’s wife and son were shot to death.
The claim comes in response to a prosecution motion for a blanket protective order the defense team says would restrict their use of the evidence, violating Murdaugh’s constitutional rights.
In that filing, Murdaugh’s attorneys allege that agents with the State Law Enforcement Division, “acting at the direction of the Attorney General’s Office, played portions of a video and audio recording obtained from Paul’s phone to Murdaugh’s family members.”
The defense says it believes the recording was shown to the family without obtaining an order authorizing the disclosure of the information to potential witnesses or third parties.
“In any event, on the recording, Paul is taking a video of his friend’s dog, who Paul was concerned about,” the documents state. “Apparently, a conversation between Maggie, Paul and Alex is also captured on this recording. Family members report that Maggie, Paul and Alex are having a convivial conversation about the behavior of their own dog, Bubba. There is absolutely no indication of a disagreement or dispute between Paul, Maggie, and Alex, according to family members who viewed the recording. However, the State contends that within minutes after this convivial, light-hearted conversation, Alex murdered both Maggie and Paul for no apparent reason.”
The defense also claims a news story about the recording did not include any information about the nature of the conversation and how “incongruent the tone and tenor of the conversation is to the State’s theory of the case.”
“Perhaps this crucial information was intentionally omitted from the media leak to portray Alex Murdaugh in the worst possible light,” the documents state. “Regardless, the State has disclosed this information in violation of this Court’s order sealing the search warrant application and the materials obtained in the searches.”
The defense goes on to allege that now that the time has come for the Attorney General’s Office to disclose a “mountain of evidence” against their client, the Attorney General “refuses to comply with his discovery obligations until the Court imposes a gag order and other restrictions” on Murdaugh and his attorneys.
Murdaugh’s attorneys call the state’s claim that the motion is “only intended to prevent the dissemination of any evidence in this case except as is necessary for the state and defense to prepare for and litigate any hearings and trial” hypocritical.
“For months on end, the state’s prosecutors have selectively leaked information about evidence obtained through sealed search warrants to various media outlets,” the defense states.
They say any reports about an audio recording from Paul Murdaugh’s phone that allegedly places Alex Murdaugh at the scene of the murders would have been obtained through a search warrant issued under seal. That seal, they say, would prohibit the disclosure of information obtained from these searches.
The state, in its motion for the protective order, argued the case has generated significant public attention and that evidence in the case “contains sensitive information which should remain protected unless and until it is used in court.” Prosecutors also say a standard state grand jury protective order already exists for state grand jury evidence and as some of it is relevant to the murder cases, “it makes sense for all of the evidence to be handled pursuant to the similar rules.”
Attorney General’s Office spokesman Robert Kittle said the office did not have a comment on the defense’s claims, referring questions to the state’s motion for the protective order, which read in part:
The state has no desire to preclude the defense from any discovery and has every intent of moving this case to a public trial as soon as praticeable. As soon as the two discovery issues are addressed and the court green lights it, discovery will be sent. For these reasons, the state moves for issuance of an order unsealing search warrants in this case as well as a temporary protective order pending this court’s decision as to whether it should be made permanent.
Copyright 2022 WCSC. All rights reserved.
Halloween Horror Nights 2022: A look inside the expanded event at Universal Studios Hollywood – Finger Lakes Times
Cloudy skies early, then off and on rain showers overnight. Low 63F. Winds light and variable. Chance of rain 40%..
Cloudy skies early, then off and on rain showers overnight. Low 63F. Winds light and variable. Chance of rain 40%.
Updated: September 5, 2022 @ 11:04 pm
Crows take over in the Scarecrow-themed Maze at Universal Studios on Aug. 22, 2022, in Los Angeles. Along with the Halloween Maze, there are seven other mazes that will open for scares on Sept. 8 and run through Halloween. (David Crane/Los Angeles Daily News/TNS)
Crows take over in the Scarecrow-themed Maze at Universal Studios on Aug. 22, 2022, in Los Angeles. Along with the Halloween Maze, there are seven other mazes that will open for scares on Sept. 8 and run through Halloween. (David Crane/Los Angeles Daily News/TNS)
Bloody guts dangle from the ceiling, swaying as we make our way through a maze filled with bodies, scarecrows and towering corn stalks. Through the darkness, beams of sunlight creep in. It’s an unnerving scene, even though it’s daylight outside.
Halloween Horror Nights creative director and executive producer John Murdy cracks a smile as our crew collectively reacts with an “ewwwww” as we brush by what appears to be human entrails. Of course, it’s all an elaborate illusion pulled off by the folks responsible for some of the most terrifying modern horror films and from a studio that gave life to the original Universal monsters.
We were deep in the heart of one of Universal Studios Hollywood’s annual scare-a-thon’s newest attractions, Scarecrow: The Reaping, where Murdy’s crew was feverishly putting the finishing touches on scenes in an already elaborately detailed maze. He gave us tours of the attractions ahead of the event officially kicking off on Sept. 8 and running select evenings through Oct. 31.
HHN was shut down in 2020 due to the COVID-19 pandemic, but returned for a smaller event in 2021.
“This feels more like us,” Murdy said. “For so much of last year, we were asking ‘Is it going to even happen?’ Things were changing every week, as far as the regulations, and there was just less content last year than we typically do. Now we’re back to doing eight houses, the Terror Tram — where we’re adding a whole new section — plus our three scare zones.”
Things do look and feel a bit more normal throughout the theme park as we head into the haunting season and there are quite a few new additions to the seasonal event. Here’s what’s coming in 2022.
Each season, HHN produces walk-thru attractions based on popular horror films, television shows, video games, original concepts and even collaborations with big-name music acts like Black Sabbath and Alice Cooper.
This year, Murdy and his team worked with longtime HHN fan and pop star Abel Tesfaye, who is professionally known as The Weeknd. They had no idea the 32-year-old had been coming to their event for years, until he approached them with the idea to turn his 2020 “After Hours” album into a real life horror story.
“He comes at things very cinematically and he had an interest in being a film director when he was younger,” Murdy said of Tesfaye, who was very hands-on in the creation of The Weeknd: After Hours Nightmare. “I wouldn’t be surprised if he ended up directing a movie at some point.”
Though the attraction is based on songs like “Blinding Lights,” “Escape from LA,” “Heartless” and “Save Your Tears,” Murdy was more interested in bringing out the thoughts and emotions that were in The Weeknd’s head during the writing and recording process.
“It goes to some very dark places,” he said. “We want fans to feel like they’re living it, so while it takes its inspiration from the songs and the music videos, we take that and turn it up to 11.”
Other new attractions include Scarecrow: The Reaping, a maze that cropped up at Universal Orlando in 2017. It’s set at a Depression-era farm where extreme drought and inexperienced farmers ravaged the land.
“I see it as an ecological horror story,” Murdy said, noting that the scarecrows, crows and Mother Nature are the biggest threats within. “We grounded this story in the ’30s with the Dust Bowl, which was the biggest ecological disaster that ever befell America up until that point. So it seemed, in this day and age, very much a hot topic, so we’ve made it a cautionary tale for our times.”
There’s also an original maze dubbed Universal Horror Hotel that is set inside a 1920s Hollywood hotel, which was once the hunting ground of a notorious serial killer. His ghost still lurks inside and guests must try to check-out before it’s too late.
An attraction based on the 1988 cult classic film “Killer Klowns from Outer Space” will return to HHN this year with alien clowns, colorful environments and the best scents, as the cotton candy aroma fills the air throughout the maze.
One not-so-pleasant-smelling maze will be on modeled after the original “Halloween” film. With the franchise, starring original Scream Queen Jamie Lee Curtis, coming to a close with “Halloween Ends” hitting theaters on Oct. 14, HHN takes a nostalgic look back at John Carpenter’s 1978 classic which spawned the iconic boogeyman, Michael Myers. And there’s plenty of “rotten flesh” smells to enhance the experience.
Universal is bringing back La Llorona: The Weeping Woman, an attraction based on the Latin American mythical ghost who seeks out children. It will be located on the upper lot, adjacent to the Dia De Los Muertos Plaza and the all-new El Pueblo del Terror scare zone. The area will feature Latin American and Aztec mythical creatures like El Cucuy, chupacabras and more.
“It’s almost like a mini land dedicated to Latin American myths and legends and a celebration of Latino horror heritage, which I think is cool,” Murdy said. “So many people have reached out to us and said they are thrilled to see their culture represented at our event.”
The Horrors of Blumhouse is back, too, this time focusing on the movie studio’s horror-comedy “Freaky” and the paranormal-thriller, “The Black Phone.” The Universal Monsters maze will be resurrected as Universal Monsters: Legends Collide, which focuses on an original story featuring The Wolf Man, The Mummy and Dracula and includes a musical score composed by Guns ‘N Roses guitarist, Slash.
Jabbawockeez, a hip-hop dance crew that won the first season of “America’s Best Dance Crew,” will once again take the stage multiple times per evening with an all-new show that mixes dance, special effects, music, horror and humor.
Fans will notice that the HHN footprint has dramatically expanded this year. Aside from the three dedicated scare zones — El Pueblo del Terror, Sideshow Slaughterhouse and Clownsawz — there are designated immersive photo op areas where guests can pose with creepy characters and, for the first time ever, Death Eaters will roam Hogsmeade Village inside The Wizarding World of Harry Potter.
The Terror Tram has also been extended and will once again be taken over by scary failed clown Hollywood Harry. He’s throwing a Halloween party on the backlot and everyone is invited. Each themed area along the walking path pays homage to classic Halloween imagery, including jack-o-lantern’s, ghosts, black cats and skeletons and it concludes inside the all-new Jupiter’s Claim set from director Jordan Peele’s latest thriller, “Nope.” In a rare attraction crossover moment, The Teathered from Peele’s 2019 horror film “Us” will be occupying this space and are ready to terrorize those who innocently cruise through.
———
Halloween Horror Nights
When: 7 p.m. select evenings Sept. 8-Oct. 31
Where: Universal Studios Hollywood, 100 Universal City Plaza, Universal City
Tickets: $72-$102 general admission; $179-$289 Universal Express; $219-$329 Universal Express Unlimited; $112-$154 After 2 p.m. Day/Night Passes; $319-$449 R.I.P. Tour; $199 Frequent Fear Pass; $329 Ultimate Fear Pass. All tickets are now on sale now at universalstudioshollywood.com.
———
Success! An email has been sent to with a link to confirm list signup.
Error! There was an error processing your request.
Our daily headlines delivered to your inbox each morning for your reading pleasure.
Receive news and emergency updates as soon as the stories unfold.
Get the latest obituaries from the Finger Lakes Times.
Get the latest local and national news.
Get our expert short-term forecast, summary of the weather details and news of any severe weather.
Measurement of focal light spot at single-photon level with silicon photomultipliers | Scientific Reports – Nature.com
Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 15060 (2022)
Metrics details
Focal spot (light spot) at single-photon level have important applications in many fields. This report demonstrates a method for measuring focal spot size at the single-photon level indirectly. This method utilizes Silicon Photomultiplier (SiPM) as the single-photon sensitive detectors, combined with a nano-positioning stage. The approach involves one- or two-dimensional space scanning and a deconvolution operation, which enable evaluations of the size and spatial distribution of the focal spot formed by a single-photon-level pulsed laser. The results indicate that the average full width at half maximum of the focal spot is about 0.657 μm, which is close to the nominal resolution of the objective lens of the microscope (i.e. 0.42 μm). The proposed method has two key advantages: (1) it can measure focal spot at the single-photon level, and (2) the focal spot can easily be aligned with the detector because the array area of the Geiger mode avalanche photodiode (Gm-APD) cells in SiPM is usually on the order of square millimeter, and there is no need to put an optical slit, knife edge, or pinhole in front of the detector. The method described herein is applicable in weak focal spot detection related fields.
Light spot focusing technology has important applications in laser autocollimation and measurements1, two-dimensional exfoliated materials2, optical transmission3, and biological microfluidic tube preparation4. These applications require the light beam to be focused on a small focal spot. Small focal spot at single-photon level, have important applications in time-dependent fluorescence lifetime spectroscopy5, confocal laser scanning microscopy (CLSM)6,7 and single-photon-emission computed tomography (SPECT)8. The conventional methods of measuring light focal spot include plate/plane detector measurements9,10,11, (slit, aperture or knife edge) scanning methods12,13, and charge coupling device (CCD) imaging14,15,16. The intensity spatial distribution and size of a millimeter-level focal spot is usually easy to be obtained by these methods directly. Jain et al.10 used a digital 194 μm pixel flat panel detector (FPD) combined with a micro pinhole (10 μm) to measure the focal spot, and they applied a deconvolution method to reduce the fuzzy effect caused by the detector during the measurement process; the size of the measured focal spot was about 0.6 mm. However, millimeter-level focal spot cannot meet the spatial accuracy requirements of the above mentioned applications4. To obtain smaller light focal spot, Liu et al.15 used a CCD to calculate the centroid position of the focal spot based on the two-dimensional (2D) gray values of the small focal spot. This approach allowed the researchers to measure the size of the light focal spot with a diameter on the order of dozens of microns. Tiwari et al.16 situated the CCD photosensitive surface perpendicular to the beam axis, recorded the 2D beam intensity distribution on the scanning plane via CCD imaging, and measured a focal spot of 4 μm, which was smaller than the pixel size of the CCD. Nevertheless, the CCD used in this method cannot be applied in single-photon detection, which means that it cannot be used to measure a light focal spot at single-photon level. What’s more, to date, measurements of the single photons level have rarely been achieved. Liu 17 used a high-speed rotating hollow probe with a small hole to perform arc scanning in the light field and employed a photomultiplier tube (PMT) as the optical signal detector to measure a Bessel beam with a minimum size of 6 μm. With this method, a non-diffractive light focal spot with a small energy density and unknown energy distribution could be measured without focusing, thanks to the high responsiveness, low noise, fast response time, and high quantum efficiency of the PMT. However, the scanning structure was complex, the photon number resolution capability was poor, and the integration level of the system was limited because of the relatively large volume of PMT.
To relieve the aforementioned problems, this report proposes a method for measuring tiny focal spot at the single-photon level, by using Silicon Photomultiplier (SiPM) which has recently been applied in many fields and can be served as a substitute for traditional PMT18,19,20. The SiPM is composed by hundreds to thousands of Single Photon Avalanche Diodes (SPADs), also called Geiger mode APDs (Gm-APDs), each Gm-APD cells is connected in parallel to a common load by a serial resistor with a resistance of about hundreds of kilohm. In this proposed method, the one-dimensional (1D) and 2D spatial distributions of the relative photoresponse of SiPM to the light focal spot were firstly obtained by scanning a nano-positioning stage. Then, the 1D and 2D spatial distributions of the relative intensity of the focal spot under test were determined by deconvolution operation21. No slit, knife edge, or pinhole was required in the proposed system.
The experimental setup used to measure the focal spot is shown in Fig. 1. The SiPM (The model and necessary parameters were shown in Table 1) was placed in a shielded metal box with an optical aperture. The photosensitive side of the SiPM was fixed facing downward on the nano-positioning stage (closed-loop displacement accuracy = 2 nm; displacement range = 200 μm; PI nanoXYZ®, Germany), which facilitated alignment with the laser spot. The nano-positioning stage was controlled by the stage driver, which could freely move towards the x-, y-, and z-directions along with the SiPM. The bias voltage for SiPM from a power supply is several volts higher than the SiPM’s breakdown voltage (the over-voltage was 3 V in this work). The output avalanche pulse signal from SiPM was first amplified by a fast amplifier (homemade, bandwidth = 10 kHz–1 GHz, Gain = 50), and then sent into a high-speed digital storage oscilloscope (Tektronix DPO4102B-L digital phosphor oscilloscope, USA; sample rate = 5 GHz; bandwidth = 1 GHz) to record the pulse waveform and pulse counting rate (PCR). The threshold of the oscilloscope was set to 0.5 p.e. (where p.e. = photon equivalent) to eliminate the electronic noise from the avalanche pulses, and the hold off time of the oscilloscope was set larger than the recovery time of the Gm-APD cell of SiPMs to eliminate most of the after-pulse and delay crosstalk event. The laser beam generated by a pico-second pulsed laser (PDL-800D; central wavelength = 375 nm; full width at half maximum (FWHM) in the time domain = 44 ps; repetition frequency = 31.125 kHz to 80 MHz; maximum average optical power = 0.7 mW, PicoQuant GmbH Inc., Germany) was firstly passed through a 100 μm pinhole to limit the diameter and intensity of the light beam and then reflected by a beam- splitter of the microscope (Olympus X-73, Japan).Then, the laser beam was focused through the objective lens (Model: LMPLFLN, Japan; 100×; resolution = 0.42 μm, Olympus Corp., Japan), thus forming a tiny light spot on the surface of the SiPM. The intensity of the pulsed laser was adjusted to attenuate the number of photons reaching the photosensitive surface of the SiPM to the single-photon level for each light pulse, which means that there were only a few photons in each laser pulse on average. The distance between the SiPM and the objective lens (i.e. the z position of the nano-positioning stage) should be optimized after changing SiPM. The SiPM was scanned row-by-row by controlling the nano-positioning stage, and the SiPM output pulse counting rate (PCR) at each position in the x– and y-directions was recorded to obtain the data matrix of the PCR. The 1D and 2D PCR distribution maps could then be constructed using any common mathematical software.
Schematic diagram of the experimental setup. SiPM silicon photomultiplier, PC personal computer; the dotted box represents the microscope.
A diagram showing the scanning process of the focal spot relative to the photosensitive surface of the SiPM is presented in Fig. 2. As the pitch of the Gm-APD cell of the SiPMs differs, a suitable scanning step length and number of steps must be set when measuring the PCR of an SiPM. The spatial distribution of the PCR can also be called the spatial distribution of the detector’s relative photoresponse because the PCR directly reflects the local relative light response of the detector. The intensity of the laser pulse remained constant during the experiment, so the spatial distribution of the intensity of the focal spot reaching different SiPM surfaces should also be constant. If the size and shape of the Gm-APD cell of the SiPM as well as the spatial distribution of its photon sensitivity are known, the relative intensity spatial distribution and size of the focal spot under test, can be deduced by deconvolution method which is well known in Fourier optics or information optics26. Specifically, the spatial 1D and 2D distributions of the relative light intensity of the focused laser spot, can be obtained by deconvoluting the 1D and 2D PCR data of the SiPM and the normalized photoresponse function of the Gm-APD cell of SiPM (vide infra and Fig. 3).
Illustration of the scanning process of the focused laser spot relative to SiPM (blue dotted lines with arrows represent the scanning route; Gm-APD Geiger mode avalanche photodiode).
Spatial 1D and 2D distributions of the relative photoresponse (i.e.PCR, recorded at 0.5 p.e. threshold) of SiPMs to the single-photon-level light focal spot. (a) 1D and (b) 2D distribution of the PCR of the SiPM from Fondazione Bruno Kessler (FBK), Italy (model = NUV-HD-LF), with 35 μm Gm-APD cell pitch(The inset is the optical microscope photograph of the SiPM surface); (c) 1D and (d) 2D distribution of the PCR of the SiPM from novel device laboratory (NDL),China (model = EQR1011-1010C-T), with 10 μm Gm-APD cell pitch(the black solid square with rounded corners is the layout of the active region29); (e) 1D and (f) 2D distribution of the PCR of the Hamamatsu SiPM, Japan (model = S12571-010C) with 10 μm Gm-APD cell pitch(The inset is the secondary electron microscopy (SEM) image of the SiPM surface18). ((a,c,e) is corresponding to the function h(x, y) in Eq. (1)).
As an SiPM is composed of Gm-APD cell array with a regular cell shape (mostly square) and gaps between adjacent Gm-APD cells, the photosensitive area of the Gm-APD cell in an SiPM can be described mathematically by a rectangular function or a trapezoid function. The trapezoid function considered the decreasing electric field at the edge of the photosensitive area in a Gm-APD cell27, by first order approximation. Hence the measured 2D relative photoresponse data, h(x, y), can be regarded as the convolution of a trapezoid or rectangle function g(x, y), and the spatial distribution function of the focal spot intensity, f(x, y). They are related through the expression in Eq. (1),
where x and y are the coordinates in the waist cross-section of the focused laser beam perpendicular to the propagation direction of the beam, and ε(x, y) is the noise fluctuation of the measured data, which can be eliminated by a low-pass filtering operation. Then, according to the principle of the Fourier optics26, the intensity distribution function, f(x, y), can be obtained via deconvolution operation. Take the discrete Fourier transformation of h(x, y) and g(x, y) in Eq. (2) and (3), respectively,
where fx, fy are the variable in space frequency domain and L0 is the scanning range. Then, according to the Fourier transformation principle, we have the relationship in Eq. (4),
where F(fx, fy) is the Fourier transformation of f(x, y). The spatial distribution function of the relative light intensity of the focal spot, f(x, y), can then be obtained by the inverse Fourier transformation, as shown in Eq. (5):
The size of the focal spot can be estimated by eye in the map of f(x, y), while a more precise size (defined as the FWHM) of the focal spot can be obtained by function fitting of f(x, y). For the 1D relative light intensity distribution of a focal spot, f(x) or f(y), can be obtained by deconvolution operation of the 1D PCR data. And the size of the focal spot along the x– or y-direction can be obtained through unary function fitting of the deconvolution data, f(x) or f(y), respectively. As the semiconductor laser was working in the fundamental mode in this work, the output beam was a Gaussian beam, which is focused to a Bessel beam by the lens along its longitudinal axis. According to the well-known principle of optics28, f(x) or f(y) can be fitted by the Airy formula based on the Bessel function, as shown in Eq. (6),
where I(v) is the intensity distribution of a focal spot, v is the distance relative to the extreme point of the distribution, J1(v) is the first-order Bessel function in the first class, and I0 is the maximum intensity of the distribution. As the measured PCR data includes the dark count rate of the SiPM and possible stray-photon-induced pulse count rate, an intensity shift should be added into the fit function, as shown in Eq. (7),
where Id is the baseline of the light intensity distribution.
From Fig. 3a,b, it is clear that the spatial distribution of the PCR within an Gm-APD cell (cell pitch = 35 μm) is uniform, and different Gm-APD cells can be clearly distinguished. Figure 3c,d show the 1D and 2D distribution of the PCR of the NDL SiPM (cell pitch = 10 μm), we can see that the Gm-APDs are still distinguishable. As the layout spacing between two neighboring Gm-APD cells is 3 μm according to Ref29, Fig. 3d suggests that the size of the focal spot should be smaller than 3 μm, otherwise the different Gm-APD cells would not be distinguishable. Figure 3e,f show the 1D and 2D PCR distribution of the Hamamatsu SiPM with 10 μm cell pitch, respectively. The details in each Gm-APD cell can still be resolved by eye (Fig. 3f). The inset in Fig. 3f shows the SEM image of the 10 μm Gm-APD cell18. In the inset, the region inside the red solid line is the un-shading region, contrasting to the shading region by the quenching resistor film. One can see that the outline of un-shading region (i.e. the red solid line) in the inset in Fig. 3f is basically consistent with the outline of the photosensitive region of the SPADs in the 2D map (Fig. 3f).
The 1D deconvolution results (Fig. 4) of the 1D spatial distributions of the PCR of SiPMs (Fig. 3) were obtained by Eq. (1–5) and the rectangular function model. It is clear that for each of the tested SiPM, the spatial distribution range of the focal spot intensity was on the micron scale, and the intensity distribution of the focal spot closely followed a Bessel distribution. To quantitatively evaluate the size of the focal spot, the Airy formula based on the Bessel function (see Eq. (7)) was used to fit the 1D deconvolution results. The fitting results are shown as solid red lines in Fig. 4a,c,e, and the fitting parameters are shown in Table 2. The fitting results indicated that the average FWHM of the focal spot was 0.657 μm. To more intuitively visualize the relative intensity distributions of the focal spot, the 2D deconvolution operation was performed with the data shown in Fig. 3b,d,f to obtain the 3D views of the deconvolution results (shown in Fig. 4b,d,f, respectively). The spatial distribution ranges of the focal spot under test were basically consistent with the 1D results.
Deconvolution results of the relative photoresponse (PCR) of the SiPMs: (a) 1D and (b) 2D (shown in 3D-view) deconvolution results obtained by the FBK SiPM with 35 μm Gm-APD cell pitch (model = NUV-HD-LF); (c) 1D and (d) 2D (shown in 3D-view) deconvolution results obtained by the NDL SiPM with 10 μm cell pitch (model = EQR1011-1010C-T); (e) 1D and (f) 2D (shown in 3D-view) deconvolution results obtained by the Hamamatsu SiPM with 10 μm cell pitch (model = S12571-010C).
Table 2 shows the FWHM of the focal spot measured by the three models of SiPMs; these results are generally consistent with the nominal resolution of the objective lens of the microscope (i.e., 0.42 μm) and the focal spot size (i.e., 0.8 μm) mentioned by Anfimov et al. when measuring the fill factor of a SiPM via focused laser scanning30. The obtained FWHM result (i.e. 0.657 μm on average) are larger than the nominal focal spot resolution of the objective lens (0.42 μm), which may be due to the fact that the setup of the optical path was not adjusted to the optimal state. The adjusted R2 (i.e. the fitting determination coefficient. if the adjusted R2 is 0, the fitting effect of the model is poor; if the result is 1, the fitting is error-free.) coefficients are all close to 1, indicating that the light intensity distribution of the laser focal spot follows a Bessel distribution with high confidence.
It is worth noting that we found the different mathematical function models for describing photoresponse of Gm-APD cells in SiPM has relative little affect on the FWHM results of the focal spot (See Supplementary Information). The maximum difference of the FWHM results obtained by the two different function model (i.e. the rectangular function and trapezoid function) is 0.14 μm (See Supplementary Information). For simplicity, the rectangular function is adequate to serve as the photoresponse fucntion in our proposed method. All of the results indicate the focal spot under test is sub-micron. Therefore, the focal spot size evaluation results obtained in these experiments are reasonable.
To confirm that the focal spot incident on the SiPM surface is weak enough to the single-photon level, we recorded the oscilloscope capture and measured the histogram of the waveform area of the avalanche pulses output by the three kinds of SiPMs (see Fig. 5). Single-photon response pulses were clearly observed, and the pulses have a clear multiple relationship, corresponding to the number of detected photons (see Fig. 5a,c,e). Additionally, Fig. 5b,d,f shows a clear discrete photon-equivalent peak, which indicates that the most probable number of detected photons is 4, 2 and 1, respectively. The difference of detected photons is because that the photon detection efficiency (PDE) of the three SiPMs are different. Since the discrete peaks in Fig. 5b,d,f correspond to the number of detected photons, these plots are often called the photon number resolution spectra. The estimated average number of the photons hitting the surface of the SiPMs is about 8, obtained by dividing the average detected photons by the PDE of the SiPMs. Overall, the results in Fig. 5 confirm that the number of photons hitting the SiPM is at the single-photon level.
Oscillograph capture and the photon number resolution spectra of the SiPMs employed in this work. (a) Oscillograph showing the avalanche pulses from the FBK SiPM (model = NUV-HD-LF) under the irradiation of the focal spot; (b) Photon number resolution (histogram of the waveform area) spectrum of the FBK SiPM; (c) Waveforms of the avalanche pulses from the NDL SiPM (model = EQR1011-1010C-T) under the irradiation of the focal spot; (d) Photon number resolution spectrum of the NDL SiPM; (e) Oscillograph showing the avalanche pulses from the Hamamatsu SiPM (model = S12571-010C) under the irradiation of the focal spot; (f) Photon number resolution spectrum of the Hamamatsu SiPM.
This work verified that an SiPM combined with precision scanning technology can be used to indirectly measure the size of a sub-micron focal spot at the single-photon level. According to the deconvolution results from the measured 1D relative photoresponse distribution data, the average FWHM of the focal spot under test was about 0.657 μm, which is close to the resolution of the objective lens in the microscope (0.42 μm). The proposed method has two key advantages: first, it can be used to measure a sub-micron focal spot at the single-photon level, and second, the focal spot can easily be aligned with the detector. Through rapid scanning and a deconvolution operation, the spatial distribution of the intensity of a light focal spot can be obtained, which could lead to various applications in weak light focal spot detection and the development of sub-micron focal spot measurement techniques.
Shimizu, Y. et al. Ultra-sensitive angle sensor based on laser autocollimation for measurement of stage tilt motions. Opt. Express 24, 2788–2805. https://doi.org/10.1364/OE.24.002788 (2016).
ADS CAS Article PubMed Google Scholar
Mao, Y. et al. A vacuum ultraviolet laser with a submicrometer facula for spatially resolved photoemission spectroscopy. Light Sci. Appl. 10, 22–30. https://doi.org/10.1038/s41377-021-00463-310(1) (2021).
ADS CAS Article PubMed PubMed Central Google Scholar
Aiba, M., Beutner, B. & Milas, N. Beam-size-free optics determination. Nucl. Inst. Methods Phys. Res. A 753, 24–33. https://doi.org/10.1016/j.nima.2014.03.031 (2014).
ADS CAS Article Google Scholar
Yang, L., Ji, S., Xie, K., Du, W. & Liu, B. High efficiency fabrication of complex microtube arrays by scanning focused femtosecond laser Bessel beam for trapping/releasing biological cells. Opt. Express 25, 8144–8157. https://doi.org/10.1364/OE.25.008144 (2017).
ADS CAS Article PubMed Google Scholar
Suhling, K. et al. Fluorescence lifetime imaging (FLIM): Basic concepts and some recent developments. Med. Photonics. 27, 3–40. https://doi.org/10.1016/j.medpho.2014.12.001 (2015).
Article Google Scholar
Thibon, L., Lorenzo, L. E., Piché, M. & Koninck, Y. D. Resolution enhancement in confocal microscopy using Bessel-Gauss beams. Opt. Express 25, 2162–2177. https://doi.org/10.1364/OE.25.002162 (2017).
ADS Article PubMed Google Scholar
Slenders, E., Castello, M., Buttafava, M., Villa, F. & Vicidomini, G. Confocal-based fluorescence fluctuation spectroscopy with a SPAD array detector. Light Sci. Appl. 10, 31–42. https://doi.org/10.1038/s41377-021-00475-z (2021).
ADS CAS Article PubMed PubMed Central Google Scholar
Holly, T. A., Abbott, B. G., Al-Mallah, M., Calnon, D. A. & Soman, P. Single photon-emission computed tomography. J. Nucl. Cardiol. 17, 941–973. https://doi.org/10.1007/s12350-010-9246-y (2010).
Article PubMed Google Scholar
Wang, X., Su, X., Liu, G., Han, J. & Wang, R. Investigation of high-precision algorithm for the spot position detection for four-quadrant detector. Optik 203, 163941. https://doi.org/10.1016/j.ijleo.2019.163941 (2019).
Article Google Scholar
Jain, A., Panse, A., Bednarek, D. R. & Rudin, S. Focal spot measurements using a digital flat panel detector. Spie Med. Imaging. DOI 10(1117/12), 2043057 (2014).
Google Scholar
Wu, B., Li, L.G., Liu, S.Q., Ying, C.P., Chen, K.F. Accurate focusing of knife-edge imaging optical system based on the area under MTF curve. Proceedings of SPIE-The International Society for Optical Engineering. 8908, 89081U-89081U-6, DOI: https://doi.org/10.1117/12.2034545 (2013).
Anoop, G. & Milster, T. D. Spot distribution measurement using a scanning nanoslit. Appl. Opt. 50, 4746–4754. https://doi.org/10.1364/AO.50.004746 (2011).
ADS Article Google Scholar
González-Cardel, M., Arguijo, P. & Díaz-Uribe, R. Gaussian beam radius measurement with a knife-edge: A polynomial approximation to the inverse error function. Appl. Opt. 52, 3849–3844. https://doi.org/10.1364/AO.52.003849 (2011).
ADS Article Google Scholar
Sheng, L. G., Lv, Y., Liu, L. S., Geng, R. & Li, X. Y. A high accuracy sub-pixel light spot positioning algorithm. Appl. Mech. Mater. 644–650, 1459–1463. https://doi.org/10.4028/www.scientific.net/AMM.644-650.1459 (2014).
Article Google Scholar
Liu, X., Lu, Z., Wang, X., Ba, D. & Zhu, C. Micrometer accuracy method for small-scale laser focal spot centroid measurement. Opt. Laser Technol. 66, 58–62. https://doi.org/10.1016/j.optlastec.2014.07.016 (2015).
ADS Article Google Scholar
Tiwari, S. K., Ram, S. P., Jayabalan, J. & Mishra, S. R. Measuring a narrow Bessel beam spot by scanning a charge-coupled device (CCD) pixel. Meas. Sci. Technol. 21, 025308. https://doi.org/10.1088/0957-0233/21/2/025308 (2010).
ADS CAS Article Google Scholar
Liu, Y. Measurement of Non-diffractive facula Size and Energy Distribution (Huazhong University of Science and Technology, 2007) ((in Chinese)).
Google Scholar
K. Yamamoto, T. Nagano, R. Yamada, T. Ito, Y. Ohashi, Recent Development of MPPC at Hamamatsu for Photon Counting Applications, Proceedings of the 5th International Workshop on New Photon-Detectors, (PD18), DOI: https://doi.org/10.7566/JPSCP.27.011001 (2019).
Acerbi, F. & Gundacker, S. Understanding and simulating SiPMs. Nucl. Instr. Methods Phys. Res. 926, 16–35. https://doi.org/10.1016/j.nima.2018.11.118 (2019).
ADS CAS Article Google Scholar
Nagai, A. et al. Characterization of a large area silicon photomultiplier. Nucl. Instr. Methods Phys. Res. 2, 2. https://doi.org/10.1016/j.nima.2019.162796 (2019).
CAS Article Google Scholar
Vacheret, A. et al. Characterization and simulation of the response of multi pixel photon counters to low light levels. Nucl. Inst. Methods Phys. Res. A 656, 69–83. https://doi.org/10.1016/j.nima.2011.07.022 (2011).
ADS CAS Article Google Scholar
Gola, A., Acerbi, F., Capasso, M., Marcante, M. & Zorzi, N. Nuv-sensitive silicon photomultiplier technologies developed at fondazione bruno kessler. Sensors 19, 308. https://doi.org/10.3390/s19020308 (2019).
ADS CAS Article PubMed Central Google Scholar
FBK SiPM (NUV-HD-LF) data, https://agenda.infn.it/event/15508/contributions/30188/attachments/21368/24347/GSSI_2018_-_Alberto_Gola_-FBK_custom_SiPMs_technologies.pdf (2018).
Hamamatsu(S12571–010C) data, http://www.hamamatsu.com.cn/product/18321.html (2013).
Jiang, J. et al. Study of SiPM for CEPC-AHCAL. Nucl. Instrum. Methods Phys. Res., Sect. A 980, 164481. https://doi.org/10.1016/j.nima.2020.164481 (2020).
CAS Article Google Scholar
Goodman, J. W. Introduction to Fourier Optics 4 (Roberts & Company Publishers, 2005).
Google Scholar
G., Zappalà, Acerbi, F., Ferri, A., Gola, A., Paternoster, G., Regazzoni, V., et al. Study of the photo-detection efficiency of FBK high-density silicon photomultipliers. Journal of Instrumentation, 11, P11010-P11010, http://iopscience.iop.org/1748-0221/11/11/P11010 (2016).
Born, M. & Wolf, E. Principles of Optics 180–181 (Publishing House of Electronics Industry, 1980).
Google Scholar
Private communication with Prof. Han in NDL Lab in Beijing, China.
Anfimov, N. V., Vorobel, V., Kovalev, Y. S. & Kodyš, P. Scanning a silicon photomultiplier with a laser beam. Phys. Part. Nucl. Lett. 16, 820–825. https://doi.org/10.1134/S1547477119060025 (2019).
Article Google Scholar
Download references
This work was supported by the National Natural Science Foundation of China (Grant Nos. 11975176), the Natural Science Basic Research Plan in Shaanxi Province of China (Grant No. 2019JM-139), the Key Research and Development Program of Shaanxi Province (No. 2020KW-011),the Fundamental Research Funds of Shaanxi Key Laboratory of Artificially-Structured Functional Materials and Devices (No. AFMD-KFJJ-21207).
These authors contributed equally: Chen Zhang, Xinyue Cao, Lina Liu and Lianbi Li.
School of Science, Xi’an Polytechnic University, Xi’an, 710048, China
Guoqing Zhang, Yaxian Yang, Chen Zhang, Xinyue Cao, Lianbi Li & Xiaoxiang Han
School of Science, Xi’an University of Technology, Xi’an, 710048, China
Lina Liu
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
Y.Y. wrote the main manuscript text and analysed the results, G.Z. proposed the main ideas and overall planning, C.Z. and X.C. conducted some experiment (s), L.L. built the main experimental setup, L.L. give some support for building the experimental setup, X.H. amended and checked the whole paper. All authors reviewed the manuscript.
Correspondence to Guoqing Zhang.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Zhang, G., Yang, Y., Zhang, C. et al. Measurement of focal light spot at single-photon level with silicon photomultipliers. Sci Rep 12, 15060 (2022). https://doi.org/10.1038/s41598-022-17759-y
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-17759-y
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Advanced search
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.
Best Portable Speakers Of 2022 To Buy Right Now – The Island Now
You may require some good music to listen to when on a trip, having a picnic, beach, or any other place where plug-in speakers aren’t available or wearing earbuds isn’t suitable. Best Bluetooth speakers are also significant sound equipment for a modern home since it’s ideal for listening to music, playing games, and watching TV.
Best portable will allow you to enjoy your favorite playlist despite your location. Moreover, with the best portable speaker, you can enjoy having a party without depending on big speakers, which require hundreds or thousands of dollars.
These small devices offer a serious boom and come in a compact space; hence you can easily move with them from one place to the other. Everyone enjoys listening to music, and the concentration in improvement on audio technology has offered an opportunity for low-cost best, quality portable audio equipment.
These best Bluetooth speakers also come with an auxiliary input for convenience. In addition, they are in different colors, sizes, and shapes, plus you can connect them to numerous devices. An excellent portable Bluetooth speaker gives quality sound and plays music with minimal distortion. Moreover, a good portable Bluetooth speaker should have a great battery life to serve you adequately when on the go.
Other best Bluetooth speakers are well-built and have a higher IP rating. Therefore, they can withstand wet conditions as you use them outside. Others can charge your smartphone, some in-built virtual assistants are integrated, and others have a fancy light show.
Storm box Blast is one of the biggest plus more dominant Bluetooth speakers that Tribit’s brands have produced. Moreover, these portable speakers are distinct and sound every inch like advertised, even at higher volumes. If you are after a room-rockin’ speaker, this is among the best party speakers to choose from.
This portable Bluetooth speaker looks like a brick enclosed in Christmas tree lights. It’s a black plastic cuboid with RGB lighting panels. Moreover, the speakers also have some flashing LEDs around their drivers. There are 15 LED lights on either side of the metallic grille plus two at the back of the dual woofers.
The device also has three ambient light profiles. One light scrolls through hues for all the speaker LEDs plus the volume-effect side panels. The other maintains the speaker’s LEDs white and offers a rainbow effect to its side panels. The third ambient light turns off every beat-driven light effect, although it still fires up the side panels when you change the volume.
These best Bluetooth speakers feature both physical and wireless connections. You will get three ports at its back, shielded using a rubber cap to prevent dust and other particles.
Stormbox Blast doesn’t need power plugging for it to function. The device has an inbuilt battery which lasts about 30 hours of continuous use to fully drain. You need about 3.5 hours to fully charge this battery using a USB-C. You can connect your favorite music using Bluetooth 5.3 or a 3.5mm aux.
Bluetooth 5.3 allows dual-device pairing within a wireless range of 40m. Stormbox Blast is rated IPX7 waterproof. This makes waterproof speakers suitable for use at a pool party. With a Tribit app, one can select jazz, party, audiobook, music EQ, or classical tweak and present them with the help of a five-band EQ tab. You are also free to customize your own.
Connectivity: You can connect the Stormbox Blast speaker either wireless or wired. These best portable bluetooth speakers have a 3.5mm aux to complete a wired connection for listening. Moreover, Bluetooth 5.3 has made it possible to have a wireless connection. Bluetooth 5.3 allows wireless dual-device pairing within a range of 40m.
Simple Design: This small Bluetooth speaker has a brick design. It’s made with a strong handle, making it easier to move with it everywhere. At the top, you will get all the control buttons, including power, Bluetooth, volume up and down, Xbass boost button, etc. The speaker features 32 LED lights which are cool and more enjoyable when having a party. One can easily toggle to different modes to do pulse-like breathing or dance to the music. The colors are also adjustable.
Return Policy: Tribit brand policy lasts for 30 days only. After 30 days are over from the time of your purchase, you will not get an exchange or a refund. For a return process to be successful, the best Bluetooth speaker must be unused, and in the same state you received it. That is, in its original packaging.
Waterproof: Tribit StormBox Blast features a waterproof rating of IPX7. Therefore, you don’t need to get inside a room while enjoying your time at the beach, and a pop-up storm or rain appears. You can use this speaker pool when having a pool party. This waterproof rating also makes Tribit StormBox Blast a suitable option for hiking.
Battery Capacity: Tribit StormBox Blast comes with a battery that lasts 30 hours of battery life of continuous playback. Moreover, it takes about 3.5 hours for its battery to charge fully.Besides this, people who prefer the best noise-canceling headphones are now switching towards such speakers.
=> Click here to visit the official website of Tribit StormBox
Treblab brand has been manufacturing top-quality sound devices for a while now. With a good reputation, this brand has grown to become one of the popular picks available in marketplaces. Furthermore, this company’s latest offering is the Treblab HD Max Bluetooth speaker.
This sound device has a similar design as JBL Xtreme 3 and TREBLAB HD77. Moreover, the device features a well-built body that has a waterproof rating of IPX6. This confirms that it’s guarded against water contact for about three minutes. Therefore, you can use it in any outdoor activities without worrying about the weather.
Treblab HD Max features a detachable shoulder strap with an in-built bottle opener. Thus, you can enjoy drinks with friends while playing your best music. These tough strap connections are of metal and hence unbreakable. In addition, this sound device comes with a long-lasting battery life which offers long listening sessions, thus suitable for outdoor events like hiking or partying.
It also features three sound modes: indoor, bass boost, and outdoor. Indoor preset offers the stereo speaker some boom in the bass range. Balanced mid-range makes the lead instruments and the vocals sound clear in the mix.
This speaker has a simple design with an easy-to-recognize volume, play/pause, plus multi-function keys, which are at the top of its side, depending on how you position it. On every end, it’s fitted with a passive subwoofer for extra bass.
The device features a USB-C port for charging it. Similarly, it also includes a USB A port to enable you to charge other devices. Therefore, you can charge your smartphone as you listen to music. Apart from wireless connections, you can also connect this device via a 3.5mm port.
Booming Sound: Treblab HD Max has rich audio and punchy bass playback balance. It’s fitted with a 50W speaker and four drivers, which powers the audio. In addition, there is also a passive subwoofer on its ends. Generally, you will have a rich, crisp, and loud, filling any room minus distortion.
Moreover, you will also have three playback modes which will auto-equalize the sound based on your surroundings. Bass Boost mode pumps up the boom to offer punchy music. Indoor mode provides the best playback option for the best balance of highs, mids, and bass. Lastly, the outdoor mode offers a more natural balance for use in an open space.
Battery Life: Treblab HD Max comes with an in-built 12000mAh battery. Therefore, you will enjoy up to 20 hours of playback with a volume of 30%, and when the volume is 100%, you will have five hours of playback. You can recharge this device using USB-C and other mobile devices using USB-A.
Rugged Design: Treblab HD Max speaker looks like a tank, and the device weighs about six pounds. It comes with detachable shoulder straps making it easy to carry around. Moreover, Treblab HD Max is suitable for use in rigorous environments since it has a sturdy design. Its casing consists of a nice mixture of nylon and thick soft-touch rubbers. Moreover, the speaker suits the IPX6 water resistance rating, making it suitable for house parties or outdoor events.
Simple to Use: Treblab HD Max button layout is standard. It consists of a volume up, down, power, and play/pause. In addition, it has a mic; hence you will take phone calls on a loudspeaker.
=> Click here to visit the official website of TREBLAB
HYPERBOOM is a Bluetooth speaker with an in-built carrying strap making it simple to carry around. This best Bluetooth speaker features a neutral plus balanced audio profile making it best for listening to several audio contents.
This device comes with a high-capacity battery hence suitable for long listening sessions without recharging. HYPERBOOM ultimate ears speaker features treble ranges and balanced mid that offers a clear, accurate vocal.
This speaker is suitable for house parties, in the backyard, or any outdoor occasion. Moreover, this speaker has a square shape to offer stability and features a touch control at the top. The device has a durable plastic casing rated IPX4 water-resistant hence water splash or rain won’t damage it.
With a one-touch music control, you can pause, skip, or play tracks directly from your speaker, minus reaching your phone. Moreover, you can set up a one-touch playlist for comfortable music control on your preferred streaming platforms, including Spotify, Amazon Music, Apple Music, and Deezer premium.
HYPERBOOM speaker comes with a high-capacity rechargeable battery that offers playback for 24 hours. Nevertheless, HYPERBOOM ultimate ears features an optical, Bluetooth, and an aux 3.5mm input.
Its Bluetooth version allows two devices to pair at the same time. Besides these audio inputs, the device has USB-A output for charging devices. You can switch between all these inputs comfortably with the help of a dedicated button for each the top of the speaker. The optical and 3.5mm ports are covered with a rubber flap at the back of the speaker.
Design: Hyper Boom speaker is designed for use at house parties, in your yard, or on any outdoor occasion. This speaker has a square-shaped to make it more stable. Moreover, it also features touch capacitive controls at the top. This control allows you to play, pause, skip tracks, etc., without touching your phone. Its casing is of strong plastic material, which is IPX4 water-resistant. The speaker comes with a rubber strap attached to it, which makes carrying easier.
Sound: This speaker’s sound can make or disrupt a party. Hyperboom ultimate ears have two 114mm woofers tuned on the low end. The low-end offers some more punch in lower frequencies. The other frequencies are balanced well and the stereo sounds clear and rich.
Moreover, the speaker also has two 25mm tweeters which do well against the punchy and loud woofers. The vocals stand out well from the instrumentation, and the cymbals/hi-hats sound crisp. This makes it suitable for use on any occasion or variety of music. The speaker also features adaptive EQ and utilizes an in-built mic to adapt EQ settings.
Connectivity: Bluetooth, 3.5MM aux, or an optical port allows you to play your favorite music with this speaker. Moreover, its Bluetooth allows dual pairing simultaneously, and you will have stable connections within a range of 45M. You can charge external devices using a USB-A port. Moreover, all of these ports are covered using a waterproof rubber flap.
Battery Life: Hyperboom comes with a battery with a playback time of 24 hours when at 50% volume. Moreover, it takes only 2.5 hours to fully recharge the battery. The speaker will state the battery levels by tapping the volume up and the buttons.
=> Click here to visit the official website of HYPERBOOM
Motion Boom Plus from Soundcore is the largest portable Bluetooth speaker family member. This speaker features more power than the normal Motion Boom. Furthermore, it also has an in-built carrying handle and a new removable carrying strap. This speaker has a power consumption of 80W, split between two 30W Titanium woofers and two 10W tweeters. Moreover, this speaker has a waterproof rating of IP67. Thus it’s dust plus waterproof, which is suitable for any outdoor event.
These portable Bluetooth speakers come with a 13,400mAh rechargeable battery which offers a playback time of 20 hours. This battery is recharged using a USB-C port. To charge your external devices, you will use a USB-A port. Similarly, you can connect this speaker using Bluetooth 5.3, which supports SBC and AAC codecs.
This Bluetooth version offers improved signal strength and advanced security. Furthermore, you can also play your music through a 3.5mm aux input. The port is sealed together with USB-C and USB-A ports.
This speaker features an extra driver, which offers a wider sonic palette. Nevertheless, the speaker is still fun with hip-hop and pop tracks and other less energetic styles. High-end and mids are well defined. The speaker features an optional BassUp mode plus passive bass radiators at both ends.
Soundcore application for Android and iOS offers a simple though usable EQ using numerous presets you can save. PartyCast 2.0 will enable you to link up to other 100 compatible Soundcore speakers.
The speaker features six control buttons available below the speaker handle. This will help you govern basic actions, including playing, pausing, engaging BassUp mode, and adjusting volume. Moreover, all the other controls are illumined and operational even in dark conditions except for volume down and up.
Water and Dust Proof: This stereo pair speaker has a rating of IP67. This means it’s waterproof and dust-tight. You can submerge it to a depth of one meter for about 30 minutes minus issue. Dust-proof and waterproof protection makes the speaker suitable for use on a hike, at the beach, and in several other places.
Connectivity: You can freely connect this speaker, either wireless or wired. It has Bluetooth 5.3, which offers stable and strong signals within a range of 45M. At the rear panel, you will get a 3.5mm aux port to connect to devices that aren’t Bluetooth enabled. You will also get other ports, including a USB-C port for recharging the battery and a USB-A port for charging mobile devices.
Simple to Use: This smart speaker features an array of controls at the top front edge. Bluetooth pairing and bass mode buttons are on the far left. Moreover, the power plus PartyCast buttons are on the far right, and the multifunction button (track navigation, playback, call management) is at the center with separate volume controls on either side.
Battery Life: Motion Boom Plus has a good rechargeable battery with a capacity of 13,400mAh. The speaker will operate for about 20 hours when this battery is fully charged.
=> Click here to visit the official website of Motion Boom Plus
In the past, the best Bluetooth speakers have been an excellent and convenient way of listening to music. However, we are in an era where several portable wireless speakers are available on the Bluetooth speaker market, making it tiresome to select the best one.
Furthermore, you can also look for Best Web Hosting Services to understand thousands of options online. However, the market contains several cheap plus poor-quality portable speakers making it difficult to get a budget Bluetooth speaker that satisfies your entertainment needs. When we were searching for the best portable speaker, we considered numerous factors to have our decision. We looked at every single feature possible and cross-checked some customers’ reviews.
Presently, audio equipment isn’t about size but capabilities. Size depends on personal preference. Most portable Bluetooth speakers weigh between one and two pounds. The lower weight is better for every person since you can get comfortable carrying it to any place, including hiking.
Another important factor to check out is the speaker’s driver. Several best Bluetooth speakers have a driver of 40mm, and it’s a suitable size. The driver’s size also determines the size of the speaker. Therefore, if you are hoping to buy a big-size driver, the size of the speaker will also change.
Portable speakers have a full-range and single driver, and it’s placed downward or upward to offer better stereo sound quality.
There are speakers with twin drivers to offer loud sound. Furthermore, best Bluetooth speakers are relatively compact and cannot house a woofer. Therefore to reproduce bass sound, passive manufacturers install radiators.
A separate bass radiator is added for the speaker to offer crisp, high, detailed mid-range plus loud stereo sound.
A microphone will allow you to answer phone calls directly from the speaker. Thus, no need to disconnect the speaker. Furthermore, a microphone will connect you with a voice control assistant. This way, you will control other functions minus touching the phone, although there are speakers with in-built voice assistants.
You can go anywhere with a portable speaker. This can be to a hike, beach, party, etc.
A waterproof smart speaker is important since electronics and water are incompatible. Thus, you can freely use a waterproof speaker outdoors without any worries. Moreover, always buy a portable speaker that’s sturdy to prevent damage by accidental falls.
Measured in signal-to-noise ratio on a one to one-hundred scale in decibels. Ultimately, a 90 to100 decibel radio is of the best quality. Listening to music from a high-quality smart speaker is enjoyable.
Sound quality is an important feature to consider when purchasing a portable speaker. Speakers on our list are portable and offer better sound quality through lowering frequency plus total harmonic distortion. There are best Bluetooth speakers offering total harmonic distortion below 1%.
Furthermore, the speaker should be loud enough for you to enjoy the music at a party. Always check on speaker specifications before purchasing it. You can consider buying a portable speaker that has in-built subwoofers.
This is another aspect you should consider. The Bluetooth version is important since it impacts speakers’ efficiency. Moreover, the higher Bluetooth version has additional capabilities, including gathering sensor information.
Recharging your portable speaker after every hour of use can be stressful. This is why battery life should be important to check out when buying a portable speaker. Usually, operation length determines the battery’s life span. Moreover, a portable speaker features a USB port for recharging purposes and connectivity. Furthermore, USB ports will allow you to connect your portable speaker to a power bank.
Portable Bluetooth speakers are suitable for various cases, including watching movies, listening to music, and recording a sound podcast. Thus, they are an appropriate investment for long-term usage. Still, if you are worried about the speaker’s battery, you must invest in a portable speaker with a longer-lasting battery.
Moreover, apart from home use, there are several other places you can use these speakers. This includes when on a hiking trip, outside a pool, at the gym, at a house party, in your backyard, etc.
The best portable speaker is part of the advancement made to audio equipment. This technology is available in several modern sound systems and has several benefits.
Firstly, it’s more convenient to carry these speakers around. Secondly, the best Bluetooth speakers can connect to any device which supports Bluetooth technology. This will allow you to stream music from your device.
The connection procedure between Bluetooth-enabled devices, which can be more than two, is known as pairing. When pairing, all you have to do is follow the pairing guidelines. Moreover, the process is similar to every other Bluetooth device.
First, switch the speaker to Bluetooth mode to allow pairing. When done, you need to go to your smartphone’s Bluetooth settings to switch on Bluetooth. After switching on, the speaker will appear on the discovered list. Click on it to complete the pairing process.
A portable speaker’s average battery life ranges from 10 – 12 hours. This depends on the model you select. Moreover, the best Bluetooth speakers’ battery life varies; therefore, you must compare different options before choosing the best speaker to suit your needs.
Best Bluetooth speakers are popular but have evolved into more advanced models that produce the best quality sound and have long-lasting battery life.
Moreover, they also come with other excellent features, including Bluetooth connectivity and automatic speaker detection. These features allow users to listen to their best music from any Bluetooth-enabled device.
There before, it did, but presently it’s more improved; hence the degradation is at its minimal.
Moreover, the level of degradation depends on the quality of codecs the manufacturer employs. That is, two devices with Bluetooth 4.0 can have distinct levels of impact to sound quality. This can range from quite non-existent.
Yes. Bluetooth is normally affected by the distance between connected devices. Furthermore, things in between them also affect it. Walls, people, and other objects can lead to unnecessary resistance, affecting signal strength.
Always ensure that there’s nothing between the two devices, and you should keep them within the recommended range, normally 40M.
Portable speakers are the best way to entertain yourself when hiking, relaxing in the backyard, etc. Moreover, a portable speaker is also a suitable way of having fun with friends at the beach, camping, partying, etc. Furthermore, they come at different prices, determined by their features, brand, design, sound quality, etc. Therefore, you can decide what features will suit your needs when you need to buy a portable speaker.
Some factors to guide you include Bluetooth version, battery lifespan, size and weight, durability, sound quality, etc. Moreover, one doesn’t need to use a lot of cash to get the best portable speaker. Our list has portable speakers with excellent features in a small cast.
MIALive: Adorkor Band to stream free gig from Ghana | Music In Africa – Music In Africa
*Your language will be set using a browser cookie.
Don’t have an account? Sign up
Forgot your password?
Ghanaian music production agency Creative Matta, in partnership with the Music In Africa (MIAF) Foundation, will hold the Adorkor Virtual Concert on 18 September.
The concert is supported by the Foundation’s Music In Africa Live (MIALive) project, which was launched in response to the COVID-19 pandemic to support players in the African music industry. The project assists music professionals with funding for digital projects in three grant types: Showcase, Capacity Building and Music Advocacy.
Founded in 2020, Adorkor Band has become popular within the local live music circuit. It combines soul, funk, Afrobeats, jazz and rock with notable Ghanaian rhythms of highlife, kpanlogo and agbadza.
The band says the upcoming concert, curated for neo Afro-soul lovers and heralding a live album later this year, offers the group a broader platform to stamp its mark on Ghana’s burgeoning live music scene.
“Being a part of MIALive shows us that we are doing something right in order to be selected and that all our hard work and efforts prior to this have not been in vain,” Adorkor Band lead singer Susan Augustt told Music In Africa, adding that being selected as a MIALive beneficiary is a welcome relief for the ensemble, as COVID-19 took a huge toll on local musicians, particularly those relying on gigs to sustain themselves.
“As a new band, it was the fear of the unknown because we did not know when the pandemic was going to end and it became difficult to manage the group. This initiative takes a lot of pressure off the band in terms of financing and allows us to bring our creativity and music to life without having to compromise too much on quality.
“We are able to showcase a more refined product and seek out more opportunities with the content to reach a larger audience. It also gives a lot of hope to other bands to remain optimistic.”
The Adorkor Virtual Concert will stream live on Facebook, Instagram and YouTube.
Sponsored
See all
Disclaimer: Music In Africa provides a platform for musicians and contributors to embed music and videos solely for promotional purposes. If any track or video embedded on this platform violates any copyrights please inform us immediately and we will take it down. Please read our Terms of Use for more.
Tronsmart Reveals Its Latest T7 Wireless Bluetooth Speaker – Forbes
The new Tronsmart T7 wireless speaker is water resistant and includes a pulsing light to match the … [+]
Tronsmart may not be a household name in the consumer electronics sector, but don’t let that put you off. The company makes some tremendous true wireless earbuds and Bluetooth wireless speakers.
Designed with outdoor use in mind, the new Tronsmart T7 wireless speaker is an ideal companion for a visit to the beach or a hike in the countryside. The T7 offers 360° sound and a customizable backlight that can pulse and shimmers with the beat of the music being played.
Regarding sound quality, Tronsmart says the T7 can deliver all-round stereo sound thanks to its powerful woofer combined with back-to-back twin tweeters. And with Tronsmart’s patented SoundPulse audio, the T7 can create booming bass despite its compact size.
Tronsmart has released a smartphone app for use with the T7 that offers personalized EQ with one tap. In addition, users can choose from various EQ modes to cater to different musical tastes. The speaker can also play with a broader soundstage and extra clarity with its stereo pairing mode.
The shape of the T7 is the same cylindrical design as Tronsmart’s T6 series. There’s also outdoor protection thanks to an IPX7 rating that can shrug off water splashes and humidity. The built-in rechargeable battery inside the T7 can play for up to a long-lasting battery that provides 12 hours of playtime on a single charge.
Pricing & Availability: The Tronsmart T7 wireless speaker is available from the , and from Amazon US at $41.99, Amazon UK at £41.99 and Amazon ES at €41.99.
More info: