NACOGDOCHES, Texas (KTRE) – Court reporters have a silent but significant role in our justice system, but courts across the state are having trouble finding people to fill that role. It’s causing courts to have setbacks and leaving them to find quick resolutions.
Smaller counties are finding it difficult competing with larger cities that can pay more and often lure away would-be qualified candidates.
Dorlisa Hayter is the court administrator for Nacogdoches County and said once the long time court reporter retired, they had zero applicants for over a year. This led to backload cases that were already scheduled months in advance.
“I would have to reschedule, cancel, and just move things around for those days,” said Hayter.
County Court at Law Judge Jack Sinz said while court trials were taking a hit, they found a short-term resolution by contracting court reporters as needed, but couldn’t cover cases full-time.
“We couldn’t get them every day, so we’re able to use records maybe two or three days a week and pay them by the day and it became difficult to do that. It wasn’t a long-term solution,” said Sinz.
After some research, Sinz proposed to the commissioners court to purchase digital court recorders for his courtroom. Five microphones set to pick up the audio of each speaker. The audio files are then sent to the recording system company to be transcribed.
“Any way that we can help expedite the movement of cases and expedite the justice anywhere is certainly welcomed,” said County Judge Greg Sowell. The commissioners court approved the purchase of equipment and training, costing $10,000 altogether.
Claire Hodges overlooks the court recorder during cases and said the new recording system makes everything much more efficient.
“It allows me to go in, set who the parties are that are going to be in court that day, and then when the judge starts court I can record it and I make notes as I go.” she said.
Other East Texas counties such as Angelina, Cherokee and Smith have also adapted to digital court recorders.
Copyright 2022 KTRE. All rights reserved.
Nacogdoches County finds solution for shortage of court reporters – KLTV
Could Earth ever leave our solar system? – Livescience.com
Live Science is supported by its audience. When you purchase through links on our site, we may earn an affiliate commission. Here’s why you can trust us.
By published
And how could it happen?
In Liu Cixin’s short story “The Wandering Earth (opens in new tab)” (first published in Chinese magazine Science Fiction World in July 2000), Cixin portrays a scenario in which the planet’s leaders agree to propel Earth out of the solar system to escape an imminent solar flare that is expected to decimate all of the terrestrial planets.
This story is, of course, based in the realm of fiction, but could Earth ever really leave the solar system?
“It’s very unlikely,” Matteo Ceriotti, an aerospace engineer and space systems engineering lecturer at the University of Glasgow in the U.K., told Live Science in an email.
However, as Ceriotti explained, “unlikely” does not mean it’s “impossible,” and suggested a way it could theoretically be done.
“The Earth could be moved away from its orbit through the action of a massive interstellar object, flying through interstellar space and coming into the solar system and passing close to the Earth,” he said.
Related: What if Earth were a super-Earth?
“In this close encounter, known as a ‘flyby,’ the Earth and the object would exchange energy and momentum, and the Earth’s orbit would be disrupted. If the object were fast, massive and close enough, it could project the Earth into an escape orbit directed outside of the solar system.”
Timothy Davis, a senior lecturer in physics and astronomy at Cardiff University in the U.K., agreed that Earth could theoretically be ousted from the solar system, and has his own hypothesis about how this could happen.
“The planets, as they exist right now, are in stable orbits around the Sun. However, if the Sun were to have a close encounter with another star, then the gravitational interactions of these bodies could disturb these orbits, and potentially cause Earth to be ejected from the solar system,” Davis told Live Science in an email.
However, Davis noted that, while this scenario is feasible, it is incredibly doubtful it will happen — at least, in the foreseeable future.
“Such stellar encounters are quite rare,” Davis said. “For instance, we know that the star Gliese 710 is expected to come quite close, in astronomical terms, to the Sun in around a million years’ time — but even this flyby is unlikely to perturb the planets.”
While it’s improbable that external forces will force Earth out of the solar system any time soon, could humanity build machinery capable of shifting the planet to such a degree that it ends up being ejected?
“The energy required to remove the Earth from its orbit and eject it from the solar system is so massive — equivalent to sextillion (a 1 with 21 zeros after it) megaton nuclear bombs going off at once — that this seems unlikely,” Davis said.
Even though such an event is far from probable, what would happen if Earth were to break away from the solar system? What impacts would occur if our home planet ended up being permanently booted into the depths of the universe?
“Earth would fly into interstellar space until captured or swallowed by another star or a black hole,” Ceriotti said, adding that were Earth to leave the solar system, it would probably result in the decimation of much — if not all — of the planet’s life.
“It’s unlikely that the atmosphere would remain: Earth’s global climate is very delicate due to a fine balance of radiation incoming from the sun and energy dissipated to deep space. If this was to vary, temperatures would immediately and dramatically change,” Ceriotti said.
Related: Why isn’t Earth perfectly round?
Davis agreed that most life on Earth would not survive this cataclysmic move away from the solar system.
“If Earth were to leave the solar system, it’s very likely that the vast majority of life as we know it would disappear. Almost all the energy used by Earth’s living organisms originates from the Sun, either directly (e.g. plants that photosynthesize), or indirectly (e.g. herbivores eating the plants, and carnivores eating the herbivores).
“In this scenario, the further Earth moved away from the Sun, the lower its temperature would become. It would eventually freeze over entirely. The only natural source of heat left would be the decay of radioactive elements in the Earth’s crust left over from the formation of the solar system,” Davis said.
Davis explained that some life may linger but would ultimately be doomed. “Some ‘extremophiles’ (animals/plants that can live in extreme environments) might eke out a living from this energy, but complex life would likely disappear entirely. This radioactive heat would only allow the Earth to maintain a temperature of around minus 230 degrees C [Celsius, or minus 382 degrees Fahrenheit]. At these temperatures most of the atmosphere would also freeze out, leaving Earth as a dead, icy world hurtling between the stars,” Davis said.
—Why does the Earth rotate?
—How fast does the Earth move?
—What if Earth had rings?
Looking far into the future, Ceriotti added that our solar system will eventually be disturbed so severely that Earth will either be knocked out of it, or will be destroyed entirely.
“We predict that our galaxy is on course to collide with Andromeda [our nearest neighbouring galaxy] in approximately 4.5 billion years. Such a large-scale collision of millions of stars is likely to cause a major disruption in the solar system!” Ceriotti said. “It is also foreseen that the Sun will, in the next 5 billion years or so, enlarge and engulf the Earth,” Ceriotti added
So, while Earth will eventually leave the solar system one way or another, it’s not something we will have to worry about for a few billion years yet. Probably.
Originally published on Live Science.
Joe Phelan is a journalist based in London. His work has appeared in VICE, National Geographic, World Soccer and The Blizzard, and has been a guest on Times Radio. He is drawn to the weird, wonderful and under examined, as well as anything related to life in the Arctic Circle. He holds a bachelor’s degree in journalism from the University of Chester.
Stay up to date on the latest science news by signing up for our Essentials newsletter.
Thank you for signing up to Live Science. You will receive a verification email shortly.
There was a problem. Please refresh the page and try again.
Live Science is part of Future US Inc, an international media group and leading digital publisher. Visit our corporate site (opens in new tab).
© Future US, Inc. Full 7th Floor, 130 West 42nd Street, New York, NY 10036.
Black Wall Street Festival Brings Out The… – New Haven Independent
by | Aug 29, 2022 9:27 am
Post a Comment | E-mail the Author
Posted to: Arts & Culture, Books, Downtown, Music, Visual Arts, Business/ Economic Development
Brian Slattery Photos
The music poured onto Temple Street all the way from the plaza in the middle of the block, directing and enticing a steady stream of pedestrians and shoppers to the long rows of canopies set up for the Black Wall Street Festival, an afternoon-long event designed to showcase a wide range of Black entrepreneurs.
Thanks to the robust turnout, a live band, and a pervasive sense of cheer, the festival was true to its name, turning Temple Street Plaza into something like bazaar meets block party.
Organized by the city Department of Arts, Culture, and Tourism in partnership with The Breed Entertainment, a New Haven-based music production and entertainment company, the Black Wall Street Festival featured “25 Black-owned businesses spanning the arts, books, clothing and retail, consulting, cosmetics and skincare, food and drinks, jewelry, wellness products and more,” according to the official announcement of the event. It was “part of the City’s broader effort to advance inclusive economic growth and to provide equitable arts programming and opportunities for all, as outlined in New Haven’s first-ever Cultural Equity Plan.”
The band, headed up by Ricky Alan Draughn, strutted its way through a series of funk, R&B, and soul classics, drawing an audience who basked in the music and the heat, and answered Draughn’s calls to sing and dance when the song demanded. But the music was also there to set the tone. It created an atmosphere in which shoppers might explore what the vendors had to offer, linger and chat, and catch up with friends. As often as not, conversations began between people who seemed not to have seen one another for a while. The event brought them together.
Several vendors sold clothes they had designed. Others had soaps and original artwork. A few were authors who had their books for sale. On the opposite end of the row from the band, the Kettle King and Many Donuts had set up shop to provide snacks. Those looking for a full meal needed only walk a few steps to the restaurants on Temple Street offering lunch and outdoor seating; in a way those restaurants became part of the festival as well.
Amid the rows of vendors was Jackie Buster, there in her role as the principal and director of Wow! Creative Design Group. Wow! is a creative branding agency that has worked with clients as various as Music Haven, the Halal Guys, and the Cornell Scott-Hill Health Center.
On Saturday, Buster set up shop for the New Haven merchandise that she sold at the Info New Haven store, which she used to run before Covid.
“We were stocking the store,” she said, and when Covid closed the store, “it took on a life of its own. It just kept going.”
Wow! never fully transitioned to being online because during the pandemic, “people just weren’t buying. It was the last thing on people’s minds. It did pick up, however, when things started to normalize.”
Wow! has been designing New Haven-centric products since 2016.
“The first line that we did was for Mayor [Toni] Harp,” selling through a pop-up shop at Woolsey Hall, Buster said. “It wasn’t originally all about clothes. It was about promotional products that we thought people would take home to remember New Haven by,” Buster said. Wow! designed New Haven-themed umbrellas and coffee mugs, pins with the city’s coordinates, postcards. “It was everything. But people wear T‑shirts and hats all the time, so they became our biggest sellers.”
Buster’s family has been in New Haven for 13 generations. “I’m really, really born and bred here.” Her uncle and father were the Buster Brothers — Eddie and Bobby — who are credited with being “the heart and soul of jazz music in New Haven” during that music’s heyday on Dixwell Avenue. She designed a magnet featuring Rufus Greenlee, who owned the Monterey Club; Wow! has an entire line of New Haven jazz-themed products.
“People love buying this stuff and I enjoy selling it because I know whatever they’re buying, they’re buying because they really want it. They’re going to use it or wear it with pride.” These days, she said, “I think people are just happy to be out seeing each other, proud to represent. I think we’re just thankful to exist in an almost normal way.” And “we’re going to continue to create — keep on making this stuff.”
Not far away was A Hustlers Vibe, selling luxury streetwear from hats to T‑shirts to sweatpants for women, men, and children. They’ve been making clothes since 2015 but started in earnest in 2019.
“This is what we do, and what we’ve always done. We’ve always been into clothes,” said Ricardo Steele, who was manning the booth with Rashaan Boyd. (A third partner, Markese Clark, wasn’t at the booth that day.) It helps that A Hustlers Vibe is a group of friends who have known each other since elementary school, growing up together in the Dwight neighborhood. “It just makes it a lot more fun to do it with people you’re close with,” Steele said.
The friends found each other through sports, which “kind of brought us all together,” Steele said. “We all were playing Pop Warner football” as well as basketball. “We just became friends, and now we’re 26, so it’s been a lot of years.” He talked about just how many bonds have been forged through sports and after-school programs, or the Boys’ and Girls’ Club or the YMCA. “We all met there and we’ve been family ever since.”
A Hustlers Vibe, Steele said, is all about positivity, about working hard, making the best of the situation at hand, and relishing your progress; as their motto has it, they are “all hustle, no luck.”
“Right now we do drop-offs and pop-up shops and community events to spread the word about the brand until we get our own store. That’s the goal — to get our own store. We’re just going as far as we can, as fast as we can.” At the same time, the value of events like Black Wall Street was immediately clear to them. “It’s all about bringing it back to the community,” Stelle said.
Closer to Temple Street, Alana Ladson set out her art, in the form of prints, stickers, and other wares. Ladson took drawing seriously even as a child. “When I was a kid, I noticed a discrepancy” in how — and how often — Black people were portrayed in the media. “Where are my whimsical people of color? Where are my whimsical Black girls?” she recalled thinking. “Where are my butterflies, rainbows, and mermaids on Black folks? I wanted to see more of that and I really didn’t. So I decided when I was a little older that I would be the change. I would make what I wanted to see. That’s how I started getting into this.”
By the time Ladson was a teenager, she knew “it was going to be about art for me, but I didn’t know where I was going to take it.” Acquaintances were interested in having pieces of her art, so she started out on Etsy and in time got her own website. “Now I like to vend in person, so that’s mostly where I do business.”
Ladson works as communications manager and college career pathways manager for Music Haven, and “I love doing that. I do art, and I do that, so it’s going well.”
Ladson had for sale a mix of older and newer pieces. Prints that featured butterflies are among her older images, “but they’re really popular, so I keep circulating that.” The stickers and pins were of newer designs. In looking over her pieces she can track her growth as an artist and as an entrepreneur.
“I started off a little bit nervous,” she said. “You have to really advertise yourself, especially on Etsy.” Connecting with people who were interested in what she was making boosted her confidence. But “for the most part, I knew it was something I was going to do. I knew it was going to happen. It was just a question of when and how.”
And “as an artist, I’m still into softness, beauty, nature — those are themes that are going to persevere throughout my art forever. She has noticed “more of a feminism edge” to some of her latest pieces; some of the subjects are perhaps a little “punchier.” “So things have been changing, but it has also been the same,” she said. “Nature, beauty, whimsy — it’s all going to happen, no matter what.”
Don’t want to miss a single Independent article? Sign up for our daily email newsletter! Click here for more info.
Share this story with others.
Be the first to comment
Typical day around Lawrence Streeto
©2005 – 2022 New Haven Independent
site: smartpilldesign
EFCC – Lagos Court Jails Lawyer Two Years for N4 million Fraud – Economic and Financial Crimes Commission
EFCC – Lagos Court Jails Lawyer Two Years for N4 million Fraud Economic and Financial Crimes Commission
source
Apple's 14-inch and 16-inch MacBook Pros have hit a new all-time low price – The Verge
Filed under:
Bose’s terrific audio glasses are also cheaper than ever today
If you buy something from a Verge link, Vox Media may earn a commission. See our ethics statement.
Only the best deals on Verge-approved gadgets get the Verge Deals stamp of approval, so if you’re looking for a deal on your next gadget or gift from major retailers like Amazon, Walmart, Best Buy, Target, and more, this is the place to be.
If you’re preparing to go back to school and require a more powerful laptop than the new M2-powered MacBook Air, you might want to consider investing in Apple’s 14- and 16-inch Macbook Pro models today now that they’ve dropped to new all-time lows. Best Buy is currently selling the 14-inch, M1 Pro-powered MacBook Pro in space gray with 16GB of RAM and 512GB of storage for $1,599, a record-breaking $400 discount. The 16-inch configuration, meanwhile, is on sale at Best Buy and Amazon with Apple’s M1 Pro chip, 16GB of RAM, 512GB of storage, a 10-core CPU, and a 16-core GPU in space gray for $2,099 ($400 off).
Related
Both laptops offer lightning-fast performance that makes them ideal for content creation and creative work. Unlike the new MacBook Air, they each offer stunning Mini LED displays as well and some of the longest-lasting batteries we’ve ever tested. They also tout a terrific selection of ports, including a Thunderbolt 4 port, an HDMI port, and a full-size SDXC slot. Plus, you can use the 16-inch MacBook Pro with three external displays and a 4K TV at the same time. Read our 14- and 16-inch Macbook Pro reviews.
The 14-inch MacBook Pro can be equipped with either the new M1 Pro or M1 Max CPU and can be configured to have up to 64GB of unified memory.
The new 16-inch MacBook Pro is a creative powerhouse equipped with Apple’s latest silicon. Configurable with either the M1 Pro or M1 Max, the 16-inch screen can be lent out to up to three external displays and a 4K TV simultaneously thanks to its vast array of ports.
It’s not every day you come across a great pair of wireless earbuds for under $50, which is why today’s deal on Jabra’s Elite 3 wireless earbuds is such a standout. Regularly $79.99, they’re currently available for just $49.99 at Amazon, which is about $1 shy of their best price to date. They don’t offer active noise cancellation or multipoint support like Jabra’s pricier models, however, they remain a fantastic pair of budget-friendly earbuds thanks to their great sound quality and long battery life. The Elite 3 also allow you to use either earbud independently and sport an IP55 rating for dust and water resistance, meaning they can handle a bit of sweat and the occasional splash of water. Read our review.
Jabra’s Elite 3 earbuds have a refreshed design that’s more stylish than the company’s past earbuds. While they don’t have many frills or extra features, they fare well in the key areas of sound quality, comfort, and battery life.
If you want to give your ears a break and don’t mind forking out extra money to do so, Bose’s Frames Tempo can protect your eyes from the sun and play music simultaneously, making them a great alternative to a traditional set of in-ears. Typically $249, the sunglasses are currently on sale at both Amazon and Best Buy for $174, a new record low.
The Frames Tempo are particularly well-suited for hikers, runners, cyclists, and others who spend a lot of time outdoors, namely because they sit securely on your face no matter how much you move. Admittedly, the audio-equipped Bluetooth sunglasses offer less bass and don’t sound quite as immersive as in-ear headphones due to their design, but we still liked both their sound and voice-call quality, as well as their easy-to-use controls and included USB-C port. Read our review.
The Bose Frames Tempo are Bluetooth-equipped audio sunglasses that are designed to fit right in with an active lifestyle.
Whether you’re embarking on a vacation or simply headed to work, a video doorbell can provide some added peace of mind when it comes to home security. Luckily, the Blink Video Doorbell, our favorite budget video doorbell, is on sale right now at multiple retailers. Normally $49.99, it’s available for $39.99 at Amazon and Best Buy, which is the cheapest the battery-powered doorbell has gone for since Amazon Prime Day. You can also buy the full system — which comes with a Sync Module 2 wireless hub for free local storage and on-demand live views — for $59.98 instead of $84.98 at Amazon.
The Blink video doorbell is limited to 1080p video and doesn’t offer as many smart features as more expensive rivals, true, but it’s still a good doorbell that offers the basics, including motion-activated recording and alerts, night vision, and two-way audio. Plus, you can get up to two years of battery life with a single pair of AA batteries or hardwire it for constant power, which will also allow it to take advantage of your existing doorbell chime.
Blink’s Video Doorbell is amongst our favorites if you’re looking for one that’s budget-friendly and offers motion-activated recording and alerts, night vision, two-way audio, and up to two years of battery life.
Subscribe to get the best Verge-approved tech deals of the week.
Please confirm your subscription to Verge Deals via the verification email we just sent you.
Oops. Something went wrong. Please enter a valid email and try again.
Subscribe to get the best Verge-approved tech deals of the week.
Please confirm your subscription to Verge Deals via the verification email we just sent you.
Oops. Something went wrong. Please enter a valid email and try again.
A sneak-peek into the life & future plans of music producer & DJ Rohit Rao – NewsPatrolling
Posted by: Mahender August 29, 2022 in Entertainment, Fun 
His vast experience with music production and live performances has made him a notable DJ and music producer in the industry.
Rohit Bhalerao aka DJ Rohit Rao is an eclectic talent with an undying thirst for great music since childhood and has always understood the pulse of the entire clubbing & music production business from its very roots.
His passion for music started from a young age by learning various aspects of being a Disc Jockey. In the year 2010, he started working in nightclubs as a resident DJ. He got a chance to work in Navi Mumbai’s best clubs and events. DJ Rohit Rao is also known for his work as a sound engineer/recordist for various multimedia projects. ”As a music producer, we need to be open to new sounds and genres instead of sticking to one pattern. Each genre of music has its own vibe, so keep exploring and experiment with various sounds.” says DJ Rohit Rao.
DJ Rohit Rao is known for his dance-floor-breaking remixes and music production. He keeps himself updated with the latest music and trends and in his own style offers exactly what the crowd is looking for. In 2016, he created a remix album brand called Bollyroom under Rohit & Teju’s collaboration, which featured some of the best Bollywood songs of 2016. He committed to his fans, that he will release a new version of the album every year and has stayed true to it for 7 consecutive years, and counting. His remixes mostly gets selected by Club Mirchi on Radio Mirchi 98.3 FM, one of the best radio shows of India, among others. His latest remix of Kesariya with DJ Angel is garnering a lot of love and appreciation from music lovers.
DJ Rohit Rao has taken a lot of effort into his new release called Mind Training and Night Sailor (https://open.spotify.com/album/2TCzu8zikXiRFD4vvzW5zE). These songs are available on all major music streaming platforms including Spotify, Apple Music, Jio Saavn, Beatport, and others.
Turning his dream into a reality, DJ Rohit Rao aka Rohit Bhalerao has made tremendous progress in recent years. He has performed at various music events in India. Along with this, he has worked with a number of well-known DJs from around the world for various projects. Due to his commendable work, he has emerged as one of the best DJs and music producers in India.
As the music scene returns to normal, DJ Rohit Rao is ready to swoop his fans with his smashing new remixes. He is currently working on several music projects and is going to offer the industry some reminiscing music of its time.
To stay updated on his latest events and music releases, follow him on @djrohitrao & djrohitraoofficial on major social media sites. If you find him playing near your city or venue, do drop by to make it a memorable experience.
August 25, 2022
August 24, 2022
August 22, 2022
August 19, 2022
August 18, 2022
August 15, 2022
Comments are closed.
About-Us | Contact-Us | Advertisement Price | Partnered-with | Success Story |
YES To Celebrate 50th Anniversary Of 'Close To The Edge' With Fall 2022 U.S. Tour – BLABBERMOUTH.NET
Prog rock pioneers and Rock And Roll Hall Of Fame inductees YES have revealed the dates and details for the U.S. leg of their “The Album Series Tour 2022,” celebrating the 50th anniversary of their 1972 iconic album “Close To The Edge”. This marks the band’s first trek in the U.S. since 2019 and will kick off with two shows in Glenside, Pennsylvania at the Keswick Theatre on Friday, October 7 and Saturday, October 8 and wrap in New York at the NYCB Theatre on November 19. Tickets will begin to go on sale on Friday, September 2; check local listings for information. See the full tour dates below.
As with “The Album Series Tour 2022,” which started off in the U.K. this past June, the U.S. tour is dedicated to the late Alan White — the band’s legendary drummer — following his passing this past May. Before the tour gets underway, a special tribute concert — “Alan White – Celebrating His Life And Music” — will be held on October 2 at the Paramount Theatre in Seattle.
Alan White joined YES in June 1972, just days before their “Close To The Edge” tour began. Over the following 50 years, Alan would appear on every YES album, including 2021’s “The Quest”. Following the global pandemic, he had been looking forward to this tour and re-joining his bandmates on stage, something he lived for, in the run-up to his 50th anniversary of joining YES. Sadly, that was not be, but Alan‘s towering presence will be omnipresent on the tour. Alan‘s good friend, drummer Jay Schellen, will join YES for the forthcoming tour, alongside Steve Howe (guitars and backing vocals),Geoff Downes (keyboards),Jon Davison (lead vocals) and Billy Sherwood (bass guitar and backing vocals).
The “Close to the Edge” show will comprise full production and a high-definition video wall directed by Andy Clark and featuring the artwork of Roger Dean.
Following the release of “The Yes Album” and “Fragile” in 1971, YES released what is widely considered one of the most defining albums, not only for YES but for the whole progressive movement. “Close To The Edge” became an inspiration for their contemporaries and for successive generations of musicians. The album is saluted with a cover story in the September 2022 issue of the national magazine Guitar Player, for which Steve Howe was interviewed. He recalls: “We were young, enthusiastic, and adventurous, and we had this incredible breakthrough success with ‘Fragile’. We saw our next album as a real opportunity to prove our worth as a band. The door had been opened and we weren’t going to go backward. We wanted to sharpen our skills as far as writing and arranging.”
Journalist Joe Bosso wrote about the album’s place in rock history in Guitar Player (September 2022): “Vast, enigmatic, full of moments of spectacular grandeur and ever-changing hues, ‘Close To The Edge’ is the ‘Lawrence of Arabia’ of progressive-rock albums. Comprised of just three tracks — the dizzying side-long, 18-minute title track, the equally sprawling mini epic ‘And You And I’, and the whacked-out, hyperactive jazz-funk album closer ‘Siberian Khatru’ — ‘Close To The Edge’ documented YES operating at the peak of their musical powers.”
YES 2022 U.S. tour dates are:
Oct. 07 – Keswick Theatre – Glenside, PA
Oct. 08 – Keswick Theatre – Glenside, PA
Oct. 09 – State Theatre – New Brunswick, NJ
Oct. 11 – Ryman Auditorium – Nashville, TN
Oct. 13 – Florida Theatre – Jacksonville, FL
Oct. 14 – The Parker Playhouse – Ft. Lauderdale, FL
Oct. 16 – King Center – Melbourne, FL
Oct. 17 – Ruth Eckerd Hall – Clearwater, FL
Oct. 19 – Saenger Theatre – New Orleans, LA
Oct. 20 – Arena Theatre – Houston, TX
Oct. 21 – The Aztec Theatre – San Antonio, TX
Oct. 23 – Rialto Theatre – Tucson, AZ
Oct. 24 – The Magnolia – El Cajon, CA
Oct. 25 – Fox Performing Arts Center – Riverside, CA
Oct. 27 – Hard Rock Live – Wheatland, CA
Oct. 29 – Paramount Theatre – Seattle, WA
Nov. 04 – The Factory – Chesterfield, MO
Nov. 05 – Brown County Music Center – Nashville, IN
Nov. 06 – Taft Theatre – Cincinnati, OH
Nov. 09 – Orpheum Theater – Madison, WI
Nov. 10 – Wabash Theater – Wabash, IN
Nov. 11 – Hard Rock Casino – Gary, IN
Nov. 13 – Warner Theater – Washington, DC
Nov. 14 – The Palace – Stamford, CT
Nov. 15 – Warner Theatre – Torrington, CT
Nov. 17 – Bergen Performing Arts Center – Englewood, NJ
Nov. 18 – Wind Creek Events Center – Bethlehem, PA
Nov. 19 – NYCB Theatre – Westbury, NY
Formed in 1968 by Jon Anderson and the late and much-missed Chris Squire, YES have been one of the most innovative, influential and best-loved bands in rock music history. Their 1970s albums “The Yes Album”, “Fragile”, “Close To The Edge”, “Yessongs” (a triple live album set),“Tales From Topographic Oceans”, “Relayer” and “Going For The One” were ground-breaking in musical style and content. Their music also became synonymous with artist Roger Dean whose distinctive YES logo design and artwork adorned the lavish gatefold presentation sleeves of many YES albums.
With sales of over 50 million records, the Grammy Award-winning YES were inducted into the Rock And Roll Hall Of Fame in 2017 where they performed “Roundabout” from the album “Fragile” and the FM radio-friendly “Owner Of A Lonely Heart” from the 1985 album “90125”. In 2021 YES released their 22nd studio album, “The Quest”, produced by Steve Howe, which went to No. 1 in the UK rock chart and entered the official U.K. album chart at No. 20.
Photo credit: Mike Ainscoe
7.5/10
8/10
9/10
Trans Siberian Orchestra 2022 schedule, tour dates revealed – USA TODAY
Rare is the juggernaut as potent as Trans-Siberian Orchestra.
The musical locomotive – a gloriously grandiose combination of classical music, hair metal and holiday feels – has owned the road for more than two decades (virtually in 2020) and 2,000 shows.
This year’s tour, dubbed The Ghosts of Christmas Eve – The Best of TSO and More, pulls from TSO’s “The Ghosts of Christmas Eve” album and TV special, one of the enduring holiday classics created primarily by late founder, composer and lyricist Paul O’Neill.
The 60-city, 101-show outing runs Nov. 16 to Dec. 30; tickets go on sale Sept. 16 (10 a.m. local time) at the band’s website.
‘Hold Me Closer’:Britney Spears, Elton John hit the dance floor with synths and Auto-Tune for ‘Hold Me Closer’
But even with TSO’s immense popularity, questions persist from interested fans, from the meaning of the group’s name to their most popular songs.
We enlisted Al Pitrelli, longtime musical director and ace TSO guitarist for the West Coast touring production, to set some records straight.
You likely know it’s Trans-Siberian Orchestra, but where did that come from? In the mid-’90s, TSO spawned from Savatage, a progressive metal band. O’Neill produced and co-wrote with the band; Pitrelli played guitar.
Savatage scored an unlikely hit across multiple radio formats with the stirring guitar blaster “Christmas Eve/Sarajevo 12/24,” prompting O’Neill to spin off Savatage to record an album with a different band name and focus.
When he presented Trans-Siberian Orchestra to Pitrelli, the guitarist’s response was “Sure, it sounds cool, dude. Rolls off the tongue like Led Zeppelin would,” Pitrelli recalls with a laugh.
But the roots of the name are well-founded. O’Neill had traveled from Europe to Japan and was fascinated with Siberia, Pitrelli says. “And now, the name is synonymous with Christmas.”
Call it a trifecta of awesomeness.
Fans still thrill to “Christmas Eve/Sarajevo 12/24” because of its historical ties to TSO. But in 2004, “Wizards in Winter,” a kinetic marriage of orchestral rock, buzzing guitars and a memorable synth hook became an early viral hit when an electrical engineer in Ohio synchronized 16,000 Christmas lights on his house to every beat of the song. In 2005, Miller Brewing Co. turned the scene of colored lights and “Wizards” into a holiday commercial.
And “Christmas Canon,” based on Johann Pachelbel’s “Canon in D Major,” has become so widespread, it’s often used as a wedding song. Or, in some cases, an engagement song.
“We’ll play it live and I’ll look down from the stage and see a dude on his knee,” Pitrelli says. “I’m looking down thinking, ‘This is going to go one of two ways.’ ”
‘Dirty Dancing’ turns 35: We rank the songs on the original soundtrack
“People think we have transporters, like the Starship Enterprise,” Pitrelli jokes.
So, yes, there are two bands divided between the East and West coasts, an evolution from TSO’s first tour of seven cities in 1999.
The popularity of that initial outing prompted O’Neill to staff two touring bands. Since TSO’s performance window is only about seven weeks during the holidays, time is imperative.
“We’d rehearse in two separate rooms in a studio in New York and Paul would bop back and forth between, making sure the bands sounded like a mirror image,” Pitrelli says.
In recent years, the two groups – each with a crew of about 100 – have rehearsed at an arena in Council Bluffs, Iowa, swapping between the main stage for full production run-throughs and the locker rooms to work on harmonies and musical details.
“My job is to maintain the musical integrity of the shows,” Pitrelli says. “If you go to your favorite steakhouse, you want exactly what you like every time.”
Springsteen tickets for $4,000? How dynamic pricing works and how you can beat the system.
Pitrelli laughs, which is an answer in itself.
“Nooooo, wear whatever you want. Just show up and have fun.”
He does, however, recall TSO’s debut as a band in 1999 at the Tower Theater in Philadelphia. “I looked out and saw a really attractive older couple in crocheted reindeer sweaters, and next to them was a dude in a Slayer hoodie.”
“Absolutely not,” Pitrelli says with a touch of annoyance. “Some people, they’re naysayers and what, you want to discredit us? We’re just really good and practice really hard and every note is played live.”
The production is presented in two halves, and the first hour is one of TSO’s patented “stories.” This year will feature the 10 songs from “The Ghosts of Christmas Eve.” (The album also had a companion TV special starring Ossie Davis.)
The second hour runs down other TSO classics from albums including “Beethoven’s Last Night,” as well as the treasured “Wizards in Winter.”
And, of course, “there will be more pyro, hydraulics and blowing stuff up,” Pitrelli promises.
A new round of Usher: The R&B singer has a revamped Las Vegas residency
Since its inception, TSO has extended a charity arm in every city the bands play. Usually, the local concert promoter or radio station will earmark an organization – food banks, arts in schools programs – and TSO gives $1 from every ticket sold to the chosen charity. More than $18 million has been donated by the group through the years.
“That’s all Paul O’Neill and the O’Neill family,” Pitrelli says. “He always wanted to give back and not just come to town, do a show and leave. That was the least we could do.”
Pitrelli pegs the audience demographics as “2 to 92.”
“One of my favorite things is to see grandparents with a grandkid on their lap high-fiving and enjoying as a family,” he says. “It’s those little moments that mean the most.”
Demi Lovato unfiltered:The singer rocks hard to excavate demons on new album
UPDATE: Hankook Tire to add 1,200 jobs in $1.6 billion investment, to total about 2,200 jobs at plant in Clarksville | ClarksvilleNow.com – Clarksville Now
Update, 12:05 p.m.: Based on what a Hankook spokesman told Clarksville Now, the expansion is much more extensive than what has been reported by the state.
The Phase 2 and Phase 3 expansions together will bring a total of 1,200 new jobs. The Phase 3 expansion alone will generate 400 jobs.
There are currently about 950 employees at Hankook. After both expansions are completed, the total number of jobs at the plant will be approximately 2,200, the spokesperson said. That’s 400 more total employees than the 1,800 that was promised when Hankook was announced in 2013.
Between Phases 2 and 3, Hankook is making a $1.6 billion investment in the Clarksville plant, according to a company news release.
To apply for open positions at Hankook, visit https://careers-hankooktire.breezy.hr/
Previously:
CLARKSVILLE, TN (CLARKSVILLE NOW) – Hankook Tire announced today it will add nearly 400 jobs in Montgomery County over the next five years as part of a $612 million expansion.
This is the anticipated Phase Two expansion, combined with Phase Three: The company will double its production of passenger car and light truck tires while simultaneously conducting its Phase Three expansion to add the company’s first U.S. production line of truck, bus and radial tires to the Clarksville operations, according to a state news release.
NEWS ALERTS: To get free breaking news alerts on your phone, text the word NEWS to 77000.
“We are excited that our friends at Hankook Tire have announced funding for Phase Three!” said Montgomery County Mayor Jim Durrett. “We are looking forward to working with Hankook through the construction process and, once complete, to the many job opportunities this project will bring to Montgomery County residents.”
There are currently about 1,000 employees at Hankook.
Upon completion, Hankook Tire’s Tennessee plant will house the company’s production, warehousing, building, equipment and utilities.
“We are so proud of the growth and success Hankook has been able to achieve here,” said Shea Hopkins, vice president of industrial development for the Clarksville-Montgomery County Economic Development Council. “It is a true testament to the positive economic environment that Montgomery County has been able to cultivate with its existing businesses.”
Located off International Boulevard, the more than 2-million-square-foot facility is expected to begin tire production by the final quarter of 2024, reaching full capacity by early 2026, the release said.
“The investment in our Tennessee plant further demonstrates Hankook’s growing presence in the U.S. and commitment to serving our customers,” said Sooil Lee, CEO, Hankook Tire & Technology and president, Hankook Tire America Corp. “Through a focus on sustainable construction and innovative manufacturing, the new phase of our Tennessee plant will provide an effective local-to-local supply chain to more effectively fulfill customer demand. Additionally, we are extremely proud to continue to support the local economy by bringing nearly 400 new jobs to the Clarksville area.”
Hankook Tire’s newest expansion will bring the company’s total investment in Tennessee to nearly $2.2 billion and with the addition of nearly 400 new jobs, the company will employ roughly 2,300 across the state.
This article will be updated.
Chris Smith is editor-in-chief of ClarksvilleNow.com. Reach him by email at [email protected] or call 931-648-7720.
DP World Tour: Thriston Lawrence wins Euro Masters in playoff vs. Matt Wallace – ESPN
Thriston Lawrence won the European Masters in Switzerland following a play-off with England’s Matt Wallace on Sunday, claiming his second win on tour this season.
The South African finished the tournament tied at 18 under with Wallace before taking victory in a play-off.
“It’s a privilege to be able to take this victory,” Lawrence said.
“There’s so much history around this event, all the past champions, so I can’t wait to get my hands on that trophy.
“It’s a tricky golf course, you can lose a few shots, especially around the 14th, 15th, par fives — you can make a silly mistake and another guy can make birdies.
“But I’m just happy with my patience this week and I’m just so pleased to be able to win this week.”
England’s Richard Mansell finished alone in third place at 16 under after a three under round of 67.
Small molecule-mediated allosteric activation of the base excision repair enzyme 8-oxoguanine DNA glycosylase and its impact on mitochondrial function | Scientific Reports – Nature.com
Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 14685 (2022)
Metrics details
8-Oxoguanine DNA glycosylase (OGG1) initiates base excision repair of the oxidative DNA damage product 8-oxoguanine. OGG1 is bifunctional; catalyzing glycosyl bond cleavage, followed by phosphodiester backbone incision via a β-elimination apurinic lyase reaction. The product from the glycosylase reaction, 8-oxoguanine, and its analogues, 8-bromoguanine and 8-aminoguanine, trigger the rate-limiting AP lyase reaction. The precise activation mechanism remains unclear. The product-assisted catalysis hypothesis suggests that 8-oxoguanine and analogues bind at the product recognition (PR) pocket to enhance strand cleavage as catalytic bases. Alternatively, they may allosterically activate OGG1 by binding outside of the PR pocket to induce an active-site conformational change to accelerate apurinic lyase. Herein, steady-state kinetic analyses demonstrated random binding of substrate and activator. 9-Deazaguanine, which can’t function as a substrate-competent base, activated OGG1, albeit with a lower Emax value than 8-bromoguanine and 8-aminoguanine. Random compound screening identified small molecules with Emax values similar to 8-bromoguanine. Paraquat-induced mitochondrial dysfunction was attenuated by several small molecule OGG1 activators; benefits included enhanced mitochondrial membrane and DNA integrity, less cytochrome c translocation, ATP preservation, and mitochondrial membrane dynamics. Our results support an allosteric mechanism of OGG1 and not product-assisted catalysis. OGG1 small molecule activators may improve mitochondrial function in oxidative stress-related diseases.
Genomic DNA, particularly mitochondrial (mt), is prone to oxidative attack and modification by reactive oxygen species (ROS). Endogenous ROS arise primarily as by-products of mitochondrial oxidative phosphorylation or from exogenous exposure to chemicals and physical agents such as ionizing radiation1. Among various oxidative DNA products, 8-oxoguanine (8-oxo-dG, Supplementary Table S1) stands out as one of the most abundant in the genome1,2,3. Replication of this damaged base can be highly mutagenic by converting a normal G-C base pair into an 8-oxo-dG-A mismatch, thereby causing a G to T transversion after two rounds of DNA replication4,5,6. Accumulation of 8-oxo-dG has been causally associated (through a yet to be determined mechanism) with several age-related diseases including cancer, neurodegeneration, chronic obstructive pulmonary disease, diabetes, and heart failure7,8,9,10,11,12,13.
To counteract these potentially mutagenic consequences, cells primarily use base excision repair (BER), which is a complex multi-enzymatic process that is accomplished through the coordinated action of a DNA glycosylase, AP endonuclease, polymerase-β (or polymerase-γ in the mitochondria), as well as a DNA ligase3,14,15,16. 8-Oxoguanine DNA glycosylase (OGG1) is a bifunctional enzyme that catalyzes both a glycosylase and an AP lyase reaction. OGG1 performs the first, and perhaps also the rate-limiting step, in the damage control pathway involving 8-oxo-dG17. Several studies have demonstrated that the overexpression of OGG1, particularly within the mitochondrial compartment, confers cellular protection in assorted cellular and animal models; for examples, see18,19,20,21. These findings support the view that accelerating OGG1 activity, especially within mitochondria, may be beneficial to mitochondrial function by minimizing the accumulation of mutagenic and cytotoxic 8-oxo-dG in DNA during periods of oxidative stress.
Once OGG1 recognizes an 8-oxo-dG lesion within DNA, it efficiently removes 8-oxo-dG from the damage site through its glycosylase activity via a nucleophilic attack on C1′ of the aberrant nucleotide by the active site residue Lys24918,22. This attack leads to the formation of a Schiff base adduct between the ε-amino group of Lys249 and C1′ of the abasic product (Fig. 1a). Residue Lys249, as well as Asp268, are important for catalysis and conformational adjustment of the damaged nucleotide in the active site23. The rapid nucleobase removal is followed by a much slower AP lyase activity initiated through C2′-proton abstraction that results in β-elimination of the 3′-phosphate group and concurrent DNA strand cleavage.
OGG1 catalytic mechanism. The panels describe the structural interactions between DNA containing 8-oxo-dG and OGG1 represented by the lys249 amino acid. In (a), the glycosylase reaction is displayed and in (b) the AP lyase one with the projected re-arrangements resulting from product assisted catalysis (i) or allosteric modification (ii).
Although the glycosylase reaction is relatively well understood, the mechanism that underpins AP lyase activity, particularly β-elimination, i.e., C2′ proton abstraction, is less clear. It has been proposed24 that β-elimination is achieved through an unprecedented mechanism called “product-assisted catalysis”, in which the 8-oxoGua (glycosylase) product is retained at the product recognition pocket. The N9-atom of the glycosylase product then serves as the catalytic base for C2′-proton abstraction, which is the trigger step for the AP lyase reaction (Fig. 1b i). Consistent with this scenario, in the co-crystal structure of OGG1 and a lesion-containing DNA substrate, the liberated 8-oxoGua is seen sequestered at the active site with the N9-atom located near C2′ at a distance seemingly competent for 8-oxoGua to abstract a proton from C2′24. The 8-oxoGua analogs, 8-bromoguanine (8-bromoGua) and 8-aminoguanine (8-aminoGua, Supplementary Table S1) were also reported to activate AP lyase activity, accelerating this less efficient reaction by > 75- and > 35-fold and with a substrate turnover of 89% and 72%, respectively24. This observed difference in activation levels by these nucleobases was attributed to electron effects on catalysis, supporting the product-assisted catalysis hypothesis. Subsequently, Kuznetsov and coworkers25 suggested that: 1) binding of 8-bromoGua in the catalytic pocket would competitively inhibit enzyme activity; 2) product-assisted catalysis may be interesting mechanistically but may not be relevant in vivo and 3) 8-bromoGua might be an allosteric activator of AP lyase activity although structural support for the latter was lacking. However, binding of free 8-oxoGua at a non-substrate site on OGG1 has been shown to occur with sub-nM affinity and produced a conformational change as measured by intrinsic OGG1 tryptophan fluorescence26. Thus, binding of an activator with free enzyme at the catalytic site would prevent binding of substrate and would result in enzyme inhibition rather than activation. On the other hand, direct binding to free enzyme is consistent with allosteric activation in which 8-oxoGua or its analogues bind to a site outside of the nucleobase recognition pocket to induce a conformational change in the active site. This would move an otherwise misplaced, enzyme-derived base group into a proximal position for C2′-proton abstraction (Fig. 1b ii).
In the current investigation, we present results from a mechanistic assessment of enhanced OGG1 catalytic activity coupled with molecular modeling of potential ligand binding sites and biophysical measures utilizing OGG1 activators that were identified from random compound screening. Moreover, some of these compounds were evaluated in quantitative cellular imaging studies of mitochondrial function in response to oxidative stress. The present data are at odds with the hypothesis of product-assisted catalysis and support an allosteric activation mechanism by product analogs and non-nucleobase small molecule activators. The functional studies herein demonstrate several mitochondrial benefits of OGG1 activation by small molecules in agreement with our earlier work27 and are consistent with results previously obtained by OGG1 overexpression in the mitochondria18,19,20,21.
To understand the mechanism of human OGG1 activation, a detailed initial rate analysis was carried out. A continuous kinetic assay that followed reaction progress curves was desirable for this purpose using molecular beacon technology28 with minor modification: an 8-oxo-dG-containing hairpin DNA substrate (Substrate A) with a fluorescent quench pair of 5′-FAM and 3′-DAB (Supplementary Fig. S1 online). The substrate from the earlier design contained five base pairs 5′ to 8-oxo-dG in the stem of the hairpin DNA substrate. Upon strand cleavage by OGG1, the FAM-containing cleavage product dissociates from the rest of the molecular beacon substrate, thereby releasing the quench effect of 3′-DAB and increasing fluorescence at 522 nm upon excitation at 485 nm. The evolving fluorescence emitted from the early design substrate at 100 nM in the presence of 250 μM 8-bromoGua was linear for a short time (~ 10 min), but then leveled off at a less than stoichiometric substrate turnover (Supplementary Fig. S1). This preliminary result suggested that the cleaved pentameric DNA oligodeoxynucleotide was not completely dissociated from the larger cleavage product at reaction equilibrium. In the current design, the number of nucleotide pairs 5′ to the 8-oxo-dG was trimmed from five to three (Substrate A, Supplementary Fig. S1) to reduce the thermodynamic energy controlling dissociation of the FAM-containing cleavage product. The time course of the OGG1 reaction using 100 nM Substrate A in the presence of 200 μM 8-bromoGua was linear up to ~ 40 min, allowing accurate measurements of initial rates using this substrate (Supplementary Fig. S1).
Having established a continuous kinetic fluorescent assay, we examined the steady state kinetic mechanism of OGG1 activation by 8-bromoGua. In general, three distinct kinetic mechanisms regarding the order of substrate and activator binding are possible (Fig. 2). Crystallographic evidence indicates that upon binding of an 8-oxo-dG-containing DNA oligodeoxynucleotide to OGG1, the aberrant nucleobase is extruded from the DNA helix and inserted into an 8-oxo-dG recognition pocket on the enzyme29. This transition is a prerequisite step to cleavage of the glycosidic bond of the damaged base. Product-assisted catalysis (Fig. 1b i) necessitates an ordered mechanism whereby the substrate binds first, and the activator binds only after the substrate is bound with 8-oxo-dG having been cleaved and the product recognition pocket vacated. If substrate binding occurs after association of the activator to the free enzyme at the product recognition pocket, the flipping of the aberrant nucleobase into this pocket for cleavage would be blocked. Consequently, inhibition rather than activation of the overall activity of OGG1 would result. On the other hand, allosteric activation (Fig. 1b ii) could operate by several mechanisms. For example, for a random binding mechanism (Fig. 2a), an allosteric activator could enhance the OGG1 activity by increasing the affinity of the enzyme for its substrate (α < 1) under non-saturation conditions or by increasing kcat (β > 1), or by a combination of the two (α < 1 and β > 1). For an ordered mechanism with substrate binding first (Fig. 2b), the activation is only realized by increasing kcat (β > 1). Alternately, in an ordered mechanism with activator bound first (Fig. 2c), it binds only to the free enzyme which is necessary for substrate binding and enzyme activity. Because OGG1 is known to have a basal activity in the absence of an activator22, the ordered mechanism with activator binding first cannot account for OGG1 activation. Therefore, only the random mechanism and the ordered with substrate bound first will be considered henceforth.
Kinetic mechanisms of enzyme activation. In these kinetic schemes, the symbols represent: E, enzyme, S, substrate, A, activator, Km, Michaelis-Menton constant, Ka, activation constant, α, the coefficient of interaction between activator and substrate, and β, factor of kcat activation. Equations that describe these mechanisms of random binding, ordered with substrate binding first, and ordered with activator binding first are also provided where V is the maximal initial rate (kcatEt, in which Et is the total enzyme concentration). Further details are found in the Supplementary Table S2.
To perform the initial rate analysis, the concentrations of both substrate and 8-bromoGua were varied in the fluorescent kinetic assay and the corresponding initial rates calculated using data points from the linear portion of the incision reactions revealed by the progress curves. The initial rates were then analyzed via least squares analysis according to Eqs. (1 and 2) (Fig. 2a,b), which describe the mechanisms of random binding and ordered with substrate binding first, respectively. The random kinetic mechanism fits best to the experimental results, with the calculated α value being close to unity (1.2 ± 0.3 μM, Fig. 3d). Figure 3a depicts initial rates as a function of substrate concentration in the presence of different fixed concentrations of activator as well as corresponding theoretical lines that were calculated using the parameters derived from the least squares analysis according to the random kinetic mechanism. The Ka value of 12 ± 3 μM (Fig. 3d) agrees well with values reported in the literature from a dose–response analysis at a single fixed substrate concentration i.e., 9 μM24. The β value, which determines the extent to which the maximum rate of AP lyase is enhanced in the presence of an activator, was 36 ± 9 μM (Fig. 3d). Because binding of activator to free enzyme would inhibit, rather than activate OGG1 as described above, these results which were derived using Eq. (1) (Fig. 2a, random binding) where an activator can bind to the free enzyme as well as the ES complex with a similar affinity (α = 1.2 ± 0.3 μM, Fig. 3d), were the first strong piece of evidence to suggest that OGG1 activation by product or product-analogs may not occur through product-assisted catalysis.
Activation of OGG1 by 8-bromoGua and 9-deazaGua. The term [S] refers to substrate A displayed in Supplementary Fig. S1. Values were obtained in duplicate from an independent experiment by varying substrate concentration over time. In (a) OGG1 (at 10 nM) initial rates were measured as a function of substrate A concentration listed on the x-axis in the presence of 8-bromoGua at 0.0 (×), 0.63 (♢), 2.5 (▽), 5 (△), 10 (◻), and 20 (○) μM. Kinetic parameters from analyzing the data using Eq. (2) were used to calculate the theoretical values (solid lines). (b) Bar plot of OGG1 activity in the presence of 200 μM 8-bromoGua and 9-deazaGua. Data were normalized to OGG1 activity in the presence of 200 μM 8-bromoGua. (c) Similarly, to panel (a), plots of OGG1 (at 10 nM) initial rates as a function of substrate A concentration (x-axis) in the presence of 9-deazaGua at 0.0 (●), 39 (+), 78 (×), 156 (♢), 313 (▽), 625 (△), 1250 (◻), and 2500 (○) μM. (d) Kinetic parameters from analyzing the data using Eq. (2) (Supplementary Table 2) were used to calculate the theoretical values (solid lines). Standard deviation of the fit of the lines provides the error terms.
The N9-atom is absolutely required for base catalysis. As such, a 9-deazaGua analog (Supplementary Table S1 online) would not be expected to activate OGG1 according to product-assisted catalysis. Thus, we next tested the impact of 9-deazaGua on OGG1 activity in the fluorescent kinetic assay. First, the initial rate of OGG1 was evaluated in the presence of 200 μM 9-deazaGua at a substrate concentration (80 nM) which was close to enzyme saturation (Km = 12–15 nM, Fig. 3d). Under the same experimental conditions, this activity was ~ 25% of the initial rate of OGG1 in the presence of 200 μM 8-bromoGua (Fig. 3b). Having demonstrated OGG1 activation by 9-deazaGua relative to vehicle alone, a full kinetic initial rate analysis of OGG1 with varying concentrations of both Substrate A and 9-deazaGua was performed. The initial rates from the latter analysis were best fit with the random mechanism (Eq. 1) by least-squares analysis. Figure 3c depicts the fit results and Fig. 3d summarizes the kinetic parameters obtained from this analysis. The kcat value of 0.006 ± 1 s-1 obtained from this analysis is in good agreement with the 0.009 ± 1 s-1 value obtained from the initial rate analysis of OGG1 in the presence of 8-bromoGua (Fig. 3d). Although 9-deazaGua displays a relatively poor affinity for OGG1 (Ka = 333 ± 84 μM), the β value, which measures the fold of kcat activation, is 18 ± 3 which is 50% of the catalytic activity of OGG1 in the presence of 8-bromoGua (36 ± 9, Fig. 3d). The purity of the 9-deazaGua sample used in this analysis was determined by LCMS to be > 99.5%, thus the observed activation was not due to contamination. Given that 9-deazaGua lacks a catalytic base, this result demonstrated that product-assisted catalysis is not the principal mechanism for the β-elimination step catalyzed by OGG1.
The results described above support an observed random kinetic mechanism for allosteric activation of OGG1 by 9-deazaGua and dispute product-assisted catalysis. Thus, if the activation of OGG1 is indeed allosteric, small molecules that are structurally distinct from product analogs could be discovered as OGG1 activators. To evaluate this possibility, a random screening of small molecules in the GSK compound collection was carried out using the fluorescent kinetic assay described above. Interestingly, several small molecules with diverse structures (examples include compounds I-XIII; Supplementary Table S3) were detected that robustly activated OGG1. The Emax values of these compounds (range = 77–118%, EC50 values = 0.35–6.4 μM) were similar to the Emax value obtained for 8-bromoGua, which served as the positive control. These data indicated that the activation efficiency of these compounds, which were structurally distinct from product analogs, was as great or greater than that of 8-bromoGua. It is difficult to reconcile this outcome by product-assisted catalysis. Rather the results can be easily explained by allosteric activation, in which activation is not achieved through direct involvement of activator in catalysis, but by a conformational change at the active site upon binding of activator to an allosteric binding pocket. The latter step reorients the enzyme-derived catalytic base group for C2′-proton abstraction (Fig. 1b ii).
Compound VI, which contains a fluorine atom, was used in a 19F NMR analysis to detect compound binding to the free enzyme. Figure 4a shows that in the presence of OGG1 and a concentration range close to and above the EC50 for Compound VI (up to 24 μM), the 19F NMR resonance was broadened while also being shifted up field. This finding demonstrates that this compound binds to the OGG1 protein in the absence of a DNA substrate. Figure 4b shows a displacement experiment with compound VII in the presence of compound VI and OGG1. The line narrowing observed on the 19F NMR resonance of compound VI suggests that compound VII competes for the same binding site as compound VI. Similar results were obtained with compounds VIII-X as shown in Fig. 4c which illustrates the line narrowing effect through the peak height of the 19F NMR resonance of compound VI. These results further support an allosteric activation mechanism.
19F NMR Binding Experiments. (a) Non 1H-decoupled 19F NMR spectra of compound VI in the presence of different concentrations of OGG1. Gradual line broadening of the 19F NMR resonance as OGG1 concentration is increased indicates an interaction with OGG1. (b) Non 1H-decoupled 19F NMR spectra of 100 μM compound VI in the absence of OGG1 (top), presence of 16 μM OGG1 (middle) and presence of 16 μM OGG1 and 100 μM compound VII (bottom). The line narrowing effect observed on the bottom spectrum of Compound VI when compared to the middle spectrum is indicative of the two compounds competing for the same binding site. (c) Bar graph of the average peak heights extracted from the 19F NMR spectra (N = 2) of compound VI obtained with various OGG1 concentrations shown in panel c (dark grey on the left) and in the presence of 16 μM OGG1 plus 100 μM of a displacement compound, VII–X (light grey on the right). For the displacement experiments, the peak height of compound VI can be observed to increase, reflecting a line narrowing of its NMR resonance.
Mixed probe molecular dynamics studies identified multiple sites which could accommodate small molecule ligands with appreciable affinities (< 10 μM). Docking studies were performed against seven of the largest sites (A-G in Fig. 5). After removal of highly strained poses (those ≥ 10 kcal/mol above the lowest energy conformation) only sites B, E, and G can accommodate at least nine of the ligands. All other sites can only accommodate five or fewer ligands.
Proposed sites for small molecule OGG1 activator binding. OGG1 (blue ribbon) shown with 8-oxo-dG (yellow spheres) and DNA oligonucleotide (gold) from the cross-liked complex (PDB ID 1HU0). Hot spots (A–G) that were identified using mixed probe molecular dynamics were explored via docking experiments. Three hot spots, (B), (E), and (G) could accommodate > 9 small molecule activators.
Previously published work using compounds A, B, C, D and F (referred to herein as compounds XI, XII, XIII, XIV and VII, respectively, see Supplementary Table S3 online) showed that cells under oxidative challenge, i.e., paraquat (PQ), were protected from accumulation of 8-oxo-dG and associated PQ-induced cytotoxicity27. PQ, which at one time was a widely used agricultural herbicide, stimulated steady-state levels of 8-oxo-dG largely within the mitochondrial compartment. PQ is a redox cycler that associates with Complex I of the mitochondrial respiratory chain to produce the superoxide radical, which can then be transformed into hydrogen peroxide via superoxide dismutase30.
In the present studies, we examined the time- and concentration-dependent effects of PQ on ROS production. Supplementary Figure S2 (online) shows that ROS production was biphasic, with maximal levels obtained at 3 mM and 0.6 mM PQ at 24 and 48 h post-exposure, respectively, in A549 cells incubated with CM-H2DCFDA. Mitochondrial ROS production was also detected using the mitochondrial superoxide sensor, MitoSOX™ (Supplementary Fig. S2). PQ exposure to cells (0.03–3 mM) resulted in a concentration-dependent rise of mitochondrial ROS with maximal signal intensity (1.75-fold) at 3 mM which yielded an EC50 value of 0.28 mM for PQ after 24 h of exposure. Measurements of total glutathione content in response to PQ also showed a time- and concentration-dependent decrease of this major cellular antioxidant. After 24 h of PQ (1 mM) exposure, total glutathione decreased from 21.59 ± 0.44 mM to 17.25 ± 1.14 mM or by 20.1% but after 48 h, it declined to 3.9 ± 0.07 mM or by 87.5%. Total cellular glutathione loss indicated the severity of the ROS production throughout the cells even though it seemingly emanated from within the mitochondrial compartment. The ROS generated in the mitochondria also impacted nuclear DNA by inducing nuclear double-stranded breaks that were detected by γ-H2-AX staining. These breaks were observed only at 48 h beginning at 0.1 mM PQ (Supplementary Fig. S2) and co-existed with the concentration-dependent translocation of NF-κB (Supplementary Fig. S2), consistent with its activation. PQ activates NF-κB in tissues like brain31 and lung32 via a direct interaction with TLR4/9 receptors. Recent data indicates that fragmented, expulsed mtDNA arising from oxidative damage promotes pro-inflammatory events such as NF-κB translocation33.
Although it can’t be ruled out that PQ stimulated ROS in areas other than the mitochondria, the physical tethering of the mtDNA to the inner mitochondrial membrane, which houses Complex I, renders both the mitochondrial membranes and the mtDNA a likely ROS target. The consequences of excessive ROS production on mitochondrial membrane integrity are depicted in Fig. 6. Using machine-learning software (PhenoLOGIC, PerkinElmer) and image acquisition of fluorescence arising from emission of MitoTracker orange dye overlaid within the cells, the normal punctate appearance of functional mitochondria was differentiated from the diffuse pattern exhibited by dysfunctional ones (Fig. 6c). The graphic representation shows that PQ evoked a concentration-dependent effect on mitochondrial membrane integrity with the maximum effect obtained at 3 mM. Using PCR and two mitochondrial primers to evaluate mtDNA damage34, PQ (0.3–3 mM) provoked a concentration-dependent rise in this important parameter (Fig. 6d). Maximal mtDNA damage was obtained at 0.6 mM PQ. From our previous work showing that the OGG1 activators prevented 8-oxo-dG accumulation27, we expected that the OGG1 activators would attenuate mtDNA damage. Figure 6e–g shows that the PQ-induced injury was markedly reduced by compounds XI and VII at both concentrations of PQ but not by compound XIII. The changes in mitochondrial membrane integrity and mtDNA damage were also associated with the concentration-dependent release of cytochrome c (Fig. 6h,i). Panel j shows that compounds XIII (30 and 50 μM) and VII (30 μM) essentially blocked this PQ (0.6 mM)-induced change. The discrepancy between the efficacy of compound XIII noted in the latter experiment and the lack of efficacy with mtDNA damage is not readily apparent at this time. Compound XIII was effective in preventing accumulation of 8-oxo-dG under similar conditions27.
Effects of paraquat on mitochondrial membrane integrity, mtDNA damage and cytochrome c translocation. In (a) baseline values of mitochondrial integrity are noted by the punctate orange colors whereas in (b), paraquat exposure for 24 h elicits a diffuse characteristic in A549 cells. MitoTracker™ orange dye (overlaid orange) was used to demarcate mitochondria (red arrows) and Hoechst 33342 (blue) to denote the nucleus. (c) provides graphical representation of the mean values obtained from the imaging data from 3 independent experiments. Asterisks represent p < 0.0001 by 1-way ANOVA with Dunnet’s post hoc analyses. In (d), paraquat concentration-dependently damaged mtDNA as measured using two mitochondrial primers described in Methods. Values are depicted as percent of baseline control measurements. For (e–g), representative examples obtained from 3 independent experiments show the impact of compounds XI, XII and VII, respectively, on preventing mtDNA damage. For (h–j), changes in cytochrome c translocation are depicted in representative images using anti-cytochrome c-DyLight™-550 (yellow), CellMask™ Deep Red (red) and Hoechst 33342. In this case, OGG1 activators were applied 2 h prior to paraquat rather than 4 h in the other experiments. For (i) statistical analyses (ANOVA with Dunnett’s post-test), asterisks represent p < 0.0001 and for (j) PQ value was p < 0.0001 vs control while 30 and 50 µM of the test compound resulted in p = 0.0002 and 0.0003, respectively.
In separate experiments, normal MEFs were challenged with 400 µM H2O2 to lower mtDNA content (Supplementary Fig. S3 online). At baseline, application of compound VII to MEFs elevated mtDNA levels above control values (Supplementary Fig. S3). After subjecting the cells to H2O2, mtDNA levels at 15 min of recovery were depleted to the same extent in control and compound VII-treated cells, however, compound VII samples achieved recovery faster (Supplementary Fig. S3). These data and those described above suggest that OGG1 activation by small molecules improves mtDNA maintenance under oxidative stress conditions.
Mitochondrial bioenergetics in A549 cells in response to PQ produced time- and concentration-dependent changes (Table 1). At 24 h post-incubation with the A549 cells, ATP levels fell from 6.29 ± 0.83 μmol/gm protein obtained in the absence of PQ to 3.13 ± 0.14, 2.49 ± 0.67, and 1.99 ± 0.45 μmol/gm protein in its presence. By 48 h of incubation, ATP levels further deteriorated, for example, at 3 mM PQ, the values decreased from 5.52 ± 0.81 to 0.73 ± 0.12 μmol/gm protein. By contrast, ADP rose from 17.18 ± 1.94 to 68.69 ± 1.47 μmol/gm protein for the same time period and concentration of PQ. In separate but similar experiments using lysates prepared from cells pre-incubated with compounds XI, XIII, or VII, for 4 h prior to PQ exposure, measurements of ATP and ADP (obtained from independent wells after 48 h of PQ exposure) indicated that the fall in ATP and the rise in ADP provoked by PQ was partially attenuated. The levels of both energy metabolites were increased across the PQ concentration range in the presence of the activators. For example, at 3 mM PQ, the ATP concentration was 0.63 ± 0.05 μmol/gm protein with PQ alone but was 1.31 ± 0.11 μmol/gm protein for PQ plus compound XI. Similar findings were obtained for compounds XIII and VII, respectively, i.e., 0.96 ± 0.10 vs 1.37 ± 0.30 and 0.61 ± 0.09 vs 1.73 ± 0.08 μmol/gm protein. These differences at this PQ concentration represented increases of 108%, 43% and 184%, respectively, which were marked improvements in the amount of ATP. The differences in [ADP] between PQ (3 mM) alone and PQ plus activators were only 9, 13 and 54%, respectively. By diminishing the impact of PQ on mitochondrial bioenergetics, the OGG1 activators maintain cell health, consistent with our earlier results27.
Acute, low levels of PQ have been reported to adversely affect mitochondrial dynamics including excessive levels of fission and mitophagy with loss of TOM20 and other mitochondrial markers such as cytochrome oxidase IV in cultured neuronal cells35. The translocase of the outer mitochondrial membrane (TOM, TOM20 is a major subunit of TOM) is responsible for the import of nuclear-encoded proteins into the mitochondria. In the present study, PQ (0.03–3 mM) resulted in varied changes in TOM20 immunofluorescence (overlaid with images of MitoTracker™ orange and Hoechst 33342) in A549 cells. At low PQ concentrations (0.03–0.3 mM) TOM20 immunofluorescence increased to nearly 25% above baseline after 48 h of incubation of PQ at 0.3 mM PQ but then abruptly dropped below baseline values at 0.6–3 mM PQ (Fig. 7a). Preliminary studies indicated that the levels of dynamin related protein 1 (DRP1) in A549 cells was time-dependent over 18, 24, 30 and 48 h of incubation with PQ. At 48 h, DRP1 values fell below baseline beginning at 0.6 mM PQ (Supplementary Fig. S4 online). Similar to DRP1, A549 cells exposed to PQ revealed a time-dependent change over 24, 30 and 48 h with mitofusin 1 (MFN1) levels rising at the earlier timepoints and falling at 48 h, particularly at the higher PQ concentrations (Supplementary Fig. S4).
Paraquat-induced changes on mitochondrial dynamics. A549 cells were exposed to paraquat for 48 h and/or pre-treated with OGG1 activators for 4 h. Images were obtained and from these images graphical representations are displayed for (a) TOM20, (b) DRP1 and (c) MFN1. The dotted lines refer to the level of change induced by 0.6 mM paraquat. Values represent the average of two independent experiments in triplicate. Statistical significance was conducted and denoted as described in Fig. 6. For compound VII in (a), p = 0.042. In (b) p values from left to right side of the panel denoted by the asterisks equal 0.0138, 0.0023, 0.0002, < 0.0001, < 0.0001, 0.0242, 0.0002, 0.0003 and < 0.0001, respectively. For (c) the asterisks from left to right of the panel represent p-values of; 0.0099, 0.0498, 0.0183, 0.0045, 0.005 and < 0.0001, respectively.
Application of the OGG1 activators; XI, XII, XIII, and VII produced variable results on TOM20 fluorescence. Relative to the mean value of 0.6 mM PQ alone, PQ plus compound XI (10, 30 or 50 μM) resulted in markedly higher values. PQ plus compound XII showed a concentration-dependent rise in TOM20 immunofluorescence whereas compound XIII (10, 30 or 50 μM) and VII (25 μM) had few effects. The impact of PQ plus or minus the OGG1 activators on DRP1 content using quantitative imaging is shown in Fig. 7b. When the experiment was repeated using compounds XI, XII, XIII and VII, applied 4 h prior to PQ with 0.6 mM PQ, Fig. 7b shows that DRP1 content declined by about 24 ± 0.02% at 48 h compared to control levels. By contrast, DRP1 content was increased, essentially at all concentrations of the OGG1 activators which suggested that OGG1 activation may promote mitochondrial fission. To determine whether mitochondria were also undergoing re-organization and fusion, we evaluated the marker MFN1. Increased expression of MFN1 and MFN2 together with enhanced mitochondrial elongation have been identified in animals over-expressing mitochondrial OGG118. Figure 7c demonstrates that compounds XI, XII, XIII, and VII (4 h pre-PQ) also elevated MFN1 protein content after 48 h of PQ (0.6 mM) exposure. The highest levels of MFN1 protein were obtained with compound VII (25 μM), about 106% and 49% above basal and PQ levels, respectively. These data above are indicative of OGG1 mediated mitochondrial re-organization.
Excessive OGG1 activity could lead to the formation of apyrimic/apyrimidinic (AP) sites in the absence of sufficient participation by AP endonuclease 1 (APE1) and other downstream members of the BER pathway. Previous data using adenovirus to overexpress mitochondrial OGG1 in H9C2 cells exposed to oxidative stress showed that mRNA expression of BER members APE1 and DNA polymerase-γ was significantly upregulated by about twofold in the transduced cells compared to control ones20. In the present study, the protein content of DNA ligase III (LIG3), which may be a rate-limiting component of the BER pathway36, was measured. Figure 8 shows that LIG3 levels declined by about 50% in response to 48 h of PQ treatment (at either 0.6 or 1 mM). By contrast, LIG3 protein was significantly increased in the presence of each of the OGG1 activators. At 0.6 mM PQ, compound VII resulted in values that exceeded those values in its absence. In a separate experiment, 0.6 mM PQ increased OGG1 content by 88.3% above baseline (N = 1 in triplicate, p < 0.0001). In the presence of 0.6 mM PQ, two different chemotypes, compounds VII (30 µM) and XI (50 µM) increased OGG1 content by 142.3% (p = 0.0056) and 227.4% (p = 0.002), respectively, above that achieved with PQ alone. The previous findings described above together with those found in the present investigation suggest that enhanced OGG1 activity by an as yet unknown mechanism enhances the protein content of members of the BER pathway for mtDNA repair.
Effects of paraquat on DNA Ligase III in the presence and absence of OGG1 activators. Panels (a–c) represent images obtained in the absence and presence of 0.6 and 1.0 mM paraquat for 48 h, respectively. Sample images depict changes in DNA ligase III content (overlaid orange) with overlaid Cell Mask™ Deep Red (red) and Hoechst 33342 (blue). The line = 40 microns. In (d), graphical representation of the changes resulting in DNA ligase III content after exposure to 0.6 mM paraquat with the dotted line used to depict the changes brought about by the presence of the OGG1 activators (4 h pre-treatment). Similar data were obtained with 24 h of paraquat treatment (data not shown). Values are representative of two independent experiments performed in triplicate. In (d) p-values denoted by the asterisks from left to right of the panel equal 0.0427, 0.0448, 0.0083, 0.0239 and < 0.0001, respectively.
DNA damage arising from ROS, which are a natural by-product of mitochondrial respiration, has long been considered to be a contributing factor to aging and its accompanying diseases. The magnitude of ROS exposure in human cells each day necessitates robust repair systems particularly within the mitochondria. As such, BER and specifically OGG1, have received considerable investigative attention. The present work expands on mechanisms of enhanced OGG1 catalysis for removal of 8-oxo-dG from DNA. Using small molecule OGG1 activators, we also demonstrate potential advantages for mitochondrial function during oxidative assault.
Product-assisted catalysis was first proposed to describe enhancement of OGG1 catalysis24. The evidence for this unique mechanism (Fig. 1b i) was supported by the co-crystal structure of OGG1 with an oxidative lesion-containing DNA substrate. In this co-crystal structure, the cleaved nucleobase, 8-oxoGua, was sequestered at the product recognition pocket with the N9-atom oriented in a seemingly catalytically competent position. Although such a structural orientation would be consistent with product-assisted catalysis, it is not a proof per se of this mechanism. This co-crystal structure is likely a snapshot in time when 8-oxoGua exits the catalytic pocket after cleavage from the lesion-containing DNA substrate, as opposed to 8-oxoGua serving as a catalytic base to prompt subsequent β-elimination by the AP lyase reaction. The present studies demonstrate that activation of OGG1 can be obtained by 9-deazaGua. This product analog lacks an N9-atom that is absolutely required for product-assisted catalysis. Together with the observed random kinetic mechanism, our data suggest that product-assisted catalysis is not a likely mechanism of OGG1 activation in agreement with other investigators25. Moreover, the present data are fully consistent with a mechanism driven by allosteric activation (Fig. 1b ii). Finding structurally diverse small molecule activators, distinct from product analogs, through random screening and demonstrating binding of a small molecule activator (compound VI) to free enzyme, further supports an allosteric mechanism of OGG1 action.
Feedback regulation, either positive or negative, is an efficient mechanism for cells to adapt to fluctuations in dynamic biochemical pathways in response to an ever-changing cellular environment37. Positive feedback regulation of OGG1 by 8-oxoGua could be beneficial during oxidative stress. It has been argued that OGG1, although bifunctional, is mainly responsible for catalyzing the glycosylase reaction in the intracellular context that produces an abasic DNA product under normal physiological conditions38. Allosteric activation of OGG1 AP-lyase activity mediated by the product of the OGG1 glycosylase reaction and its analogs, as shown herein, may provide a positive feedback regulation mechanism to enhance BER in cells undergoing repetitive oxidative stress. When 8-oxo-dG accumulates, it may allosterically bind to OGG1 following excision and enhance AP-lyase functionality to accelerate BER. In turn, cells can accommodate and, over time, adapt to a more hostile environment. The content of OGG1 in the nucleus, perhaps at the cost of mitochondrial dysfunction, increased in cultured cortical neurons following short periods (4 h) of oxidative stress39. Therefore, the notion of a product-mediated allosteric activation of OGG1 offers a mechanistic explanation of the OGG1 AP-lyase catalysis but also provides a plausible mechanism by which cells respond to oxidative stress.
Allosteric activation of enzymes derives from either a reduction in Km, an increase in Vmax, or a combination of the two as the result of activator binding to an allosteric binding site on the enzyme. The α value of ~ 1 determined from the initial rate analysis of OGG1 in the current study indicates that the allosteric activation of OGG1 by 8-oxoGua analogs (Fig. 3) is mainly due to an increase of Vmax. The maximum velocity for the OGG1 AP-lyase reaction involves dynamic processes that precede and include the chemical step (β-elimination), the chemical step itself and product dissociation40. The increase in Vmax of OGG1 by 8-bromoGua arises from acceleration of the chemical step24,25,40. An activation level of more than tenfold by 8-bromoGua has been reported previously24 which is consistent with the β-value of 36 (Fig. 3) obtained in the current investigation.
Allosteric activation of OGG1 requires an enzyme-derived catalytic base for C2′-proton abstraction in the AP lyase reaction (Fig. 1b ii). A plausible candidate is Asp268. According to the structure of OGG1 co-crystalized with an 8-oxo-dG lesion-containing DNA substrate, there is only one residue within the active site that is capable of base catalysis, i.e., Asp26824. In this co-crystal structure, Asp268 is separated from C2′ by 4.9 Å, a distance that is too long for Asp268 to abstract a C2′-proton efficiently. However, it is conceivable that this distance could be shortened through a conformational change induced upon binding of an activator at an allosteric site. Norman and coworkers41 reported that changing Asp268 to Asn268 by site-directed mutagenesis did not significantly perturb the basal activity of strand cleavage. Activation of strand cleavage in the presence of 8-aminoGua, which was observed for the wild-type enzyme, was markedly compromised in the Asp268Asn protein41. This result suggests that Asp268 functions as the catalytic base for the AP lyase reaction. In the absence of activator, Asp268 is located so far from C2′ that it cannot be efficiently engaged in base catalysis. However, Asp268 could move closer to C2′ upon activator binding at an allosteric binding site. As such, Asp268 becomes fully competent for abstracting a C2′-proton. Although the evidence for the allosteric activation of OGG1 by product analogs and small molecule activators is compelling, the exact location of the allosteric binding pocket remains to be confirmed by co-crystallographic analysis of ligand binding.
In general, enzyme activators are more difficult than inhibitors to identify through high throughput screening. Small molecule activators that act as catalysts, i.e., organo-catalysts, are perhaps even more challenging to discover. They must bind to the active site, possess the unique catalytic group and adopt a precise orientation for catalysis. The current evidence argues against product-assisted catalysis and supports allosteric activation using a diverse set of small molecule activators identified through random screening. This validates targeting OGG1 with small molecule activators as potential drug candidates. Our mixed probe molecular dynamics studies suggest that several likely “hot spots” exist for allosteric OGG1 ligand binding. As shown in Fig. 5, sites B, E, and G on the OGG1 protein provide potential starting opportunities for future investigation. The importance of the molecular docking experiments against these hot-spot sites is threefold: (1) the three identified sites (B, E, and G) which accommodate the diverse ligands in this study sit outside of the catalytic pocket, thereby defining the allosteric interaction sites between small molecules and OGG1 for organo-catalysis, (2) they suggest a path forward for additional experiments to resolve the interactions of the identified chemophores using physiological concentrations of ligand during soaking with the OGG1 crystal structure, and (3) limits the search space to three sites instead of ten for additional first-principles (e.g., free energy perturbations) and machine learning approaches to optimize ligands in sites B, E, and G.
Some of the small molecule OGG1 activators described in the current work were previously shown to protect cells from accumulating PQ-induced 8-oxo-dG in mtDNA27. These earlier findings indicated that mitochondrial 8-oxo-dG formation was associated with loss of mitochondrial membrane potential (MMP), which is vitally important for energy production. The OGG1 activators attenuated this outcome and as shown here, preserved ATP levels. Moreover, the PQ-stimulated ROS occurred concomitantly with loss of mitochondrial membrane integrity and mtDNA damage in human A549 cells. Damage to mtDNA was diminished by two of the OGG1 activators. The direct application of H2O2 to a different cell type, i.e., MEF cells, decreased mtDNA copy number (CN) and its recovery was accelerated by the presence of the OGG1 activator, compound VII. DNA strand breaks, particularly mtDNA, lead to fragmentation and expulsion to elicit inflammation through several pathways, such as NF-κB translocation42. PQ also induced NF-κB translocation. The pretreatment of A549 cells with the OGG1 activators also offset cytochrome c translocation which precedes apoptosis. Although the TOM20 results did not indicate enhancement of mitochondrial density, the greater DRP1 and MFN1 protein levels in the presence of the OGG1 activators suggest heightened mitochondrial re-organization to preserve mtDNA integrity. The increased LIG3 and OGG1 content in response to PQ and the OGG1 compounds likely promotes improved BER activity to assure efficient repair of the damaged nucleobase. Lastly, cellular efficacy of these diverse “tool” compounds may be influenced by molecular weight, size, charge, lipophilicity and chemical stability in saline media.
The most prominent mitochondrial function is energy production, which is intimately dependent upon MMP. Recent studies suggest that OGG1 influences MMP. In cultured cortical neurons isolated from mice lacking the genes, Mth1 and Ogg1, 8-oxo-dG accumulated in mtDNA which was accompanied by a loss of MMP and mitochondrial function43. OGG1 siRNA rapidly decreased α-OGG1, which has a targeting sequence for mitochondrial import, coincident with progressive deterioration of MMP with menadione-induced mitochondrial superoxide production44. Respiratory capacity was, however, unaltered using OGG1 deficient (KO) mice45. Decreased mitochondrial function was unrelated to mass and due to fragmentation, suggesting that α-OGG1 is “essential to mitochondrial morphology and function after exogenous oxidative stress”44. Our previous investigation27 and the present one, are consistent with this perspective.
The accumulation of 8-oxo-dG lesions within DNA triggers serial events that are deleterious to mitochondrial function and cell viability. Menadione-induced oxidative stress in OGG1 KO cells provokes rapid cell death by two separate mechanisms, i.e., poly-ADP-ribose polymerase-dependent or calpain-mediated46. Single-stranded breaks in both genomes precedes cell death whereas breaks in mtDNA provoke its depletion. In turn, the loss of mtDNA CN lowers energy production to compromise cell viability34. By contrast, overexpression of mitochondrial OGG1 lowers mtDNA 8-oxo-dG levels with fewer mtDNA deletions and fragments with improved CN to support expression of mitochondrial encoded proteins, preservation of MMP and reduce apoptosis20. Sufficient CN is absolutely necessary for biogenesis of key oxidative phosphorylation proteins47. Depletion of CN impedes mtDNA replication47, while the persistence of abasic sites blocks replication48. Heteroplasmy and low levels of absolute CN may influence the onset of human age-related diseases49, whereas high levels of wild type mtDNA can offset deleterious pathogenic mtDNA mutations50 and support organ function51. Thus, the protection against PQ-induced mtDNA damage and the accelerated recovery of CN post-H2O2 exposure by our OGG1 activators may provide a therapeutic means to slow disease pathology.
The metabolic and functional ramifications of OGG1 deficiency (KO) or its overexpression, particularly within mitochondria, have been examined in several murine models of disease. As compared to wild type mice, OGG1 KO mice have 20-fold more 8-oxo-dG in their mtDNA52, suffer greater levels of ischemic cortical infarct39 and with aging display a Parkinson’s disease phenotype53. Moreover, the KO mice have greater high fat diet (HFD)-induced adiposity with metabolic syndrome features54 and reduced gene expression of Krebs’ cycle components. By contrast, transgenic mice that overexpress mitochondrial OGG1 have lower levels of 8-oxo-dG within white adipose tissue, improved whole body energy expenditure and attenuated adiposity18. Mitochondria of OGG1 transgenic mice are elongated with increased expression of mitochondrial encoded genes with reduced levels of NF-κB. The latter phenotype indicates that enhanced OGG1 activity within mitochondria improves their function when stressed.
Collectively, our previous27 and current findings demonstrate that OGG1 represents a promising drug target for discovering small molecule activators to treat oxidative stress-related diseases. Potentially contributing to these diseases are genetic and environmental factors that lower OGG1 efficacy. For example, activity by the loss of function OGG1 Ser326Cys variant, which is associated with Alzheimer’s Disease55 and all-cause mortality56, is improved by our small molecule OGG1 activators27. ROS-mediated oxidation of OGG1’s multiple cysteines or exposure to cadmium also lowers OGG1 catalysis57,58. Independent confirmation that small molecules can enhance OGG1 activity59, albeit by a separate mechanism than that described herein, i.e., via polynucleotide kinase phosphatase, strongly indicate that OGG1 is druggable. It is noteworthy, however, that some pro-inflammatory conditions may benefit from OGG1 inhibition60,61. The OGG1 inhibitor, TH5487, prevents TNF-α-induced OGG1 interactions with nuclear DNA to decrease NF-κB binding62. Oxidized mtDNA within mitochondria, if not readily repaired by OGG1, fragments and exits the organelle to initiate inflammation63. Nonetheless, allosteric activation by small molecules is favorable to drug discovery. The further optimization of these early, tool compounds toward selective, orally available, and potent small molecule OGG1 activators along with comparison to their inhibitory counterparts will promote greater understanding of their therapeutic potential.
Unless otherwise stipulated, chemicals including 8-bromoGua, 8-aminoGua, and Benzonase® nuclease were purchased from Sigma-Aldrich (St Louis, MO), Roche (San Francisco, CA) or for 9-deazaguanine (9-deazaGua), Santa Cruz Biotechnology (Dallas, TX). The purity of 9-deazaGua was > 99.5% as determined by LCMS (Supplementary Fig. S5).
As described previously27, Escherichia coli cells over-expressing Flag-His-Tev-rhOGG1 (amino acids 1–345) were lysed in buffer A (50 mM Tris–HCl, pH7.5, containing 250 mM NaCl, 25 mM imidazole, and 0.1 mM TCEP) supplemented with Benzonase® nuclease and EDTA-free, complete, protease inhibitor cocktail tablets. The lysate was passed twice through an Avestin pressure drop homogenizer (12 kpsi). Cell debris was removed by centrifugation (30,000 g X 45 min) and the supernatant mixed with Ni–NTA agarose resins equilibrated with buffer A. The mixture was rotated (2 h), centrifuged (4,000 g X 5 min), resuspended in buffer A and packed into a XK26 column, which was then washed with buffer A until A280 reached baseline. The captured OGG1 protein was eluted with 0–50% buffer B (buffer A + 500 mM imidazole) gradient in buffer A. The eluted fractions were analyzed by SDS–PAGE. Fractions containing protein were pooled and concentrated using a 10-kDa molecular weight cut-off centrifugal concentrator. The tags of the OGG1 protein were removed by His6-Tev protease (enzyme: substrate ratio = 1:100) followed by passage through a Ni–NTA agarose column. Tag-free OGG1 was collected, concentrated, and injected into a Superdex 200 26/60 gel filtration column equilibrated with buffer A. The eluted protein was detected by a 4–12% gradient SDS–PAGE. Human OGG1 fractions were pooled, aliquoted and stored in buffer B plus 400 mM NaCl at − 80 °C. Both the full length (1–345 amino acids) and truncated (12–345) OGG1 proteins were prepared to 99% purity without DNA contamination measured by gel densiometry with chromatograms at an A280/A260 ratio. Both proteins were tested using a gel-based assay and the fluorescent kinetic assay described below, with comparable activity, however the truncated form was used in these studies. It has been reported that the OGG1 β-isoform in situ lacks glycosylase activity but protects mitochondrial function as an aconitase chaperone protein64.
An assay was constructed based on published methods28 using an 8-oxodG-containing hairpin oligodeoxyribonucleotide (IDT, Coralville, IA) in water (100 μM) which was annealed (Peltier Thermal Cycler, BIO-RAD, Hercules, CA) by heating (90 °C X 5 min) and cooling (4 °C at 0.05 °C/sec) the sample. All reactions (total assay volume = 10 μl; the buffer contained 50 mM Tris–HCl, pH 7.5, 50 mM KCl, 1 mM EDTA, 1 mM DTT, 1 mM CHAPS and 0.1 mg/ml BSA) were run in Greiner 384 black low volume plates (Bio One, Monroe, NC). The annealed substrate plus or minus activator was mixed with enzyme and the evolving fluorescence of each well was measured in kinetic mode (λex/em: 485/522 nm and a dichroic at 515 nm, SpectraMax, Molecular Devices, San Jose, CA). Initial rates were calculated from the linear phase and the molar concentration of the reaction product from a FAM standard curve.
Compounds (> 2 million from the GSK collection) were dispensed (0.06 μl/well in DMSO) in 1536 Greiner black low volume plates. The 8-oxodG containing hairpin DNA substrate in 3 μl assay buffer was added to each plate well followed by addition of 3 μl enzyme. The concentration of the reactants in the compound screening protocol were: OGG1 = 10 nM, substrate A = 100 nM, and compounds were added at 20 µM. The level of DNA cleavage was: < 5% for OGG1 alone and about 20% for OGG1 + Hits or 8-bromoGua. Compounds with activation > 20% relative to that obtained with 500 μM 8-bromoGua, which was defined as 100%, were classified as potential Hits. After incubation (22 °C X 40 min), fluorescence intensity was determined (ViewLux, Perkin Elmer, Waltham, MA). Concentration responsiveness was evaluated with these hits followed by a least squares analysis according to Eq. (1):
where ν = the initial rate in the presence of an activator, Emax = maximum activity, EC50 = concentration of activator at which the enzyme displays half-maximal activity, B = background, and n = the Hill coefficient. Several Hits were assessed for binding to OGG1 using surface plasmon resonance (Biacore T100, A100 and S51, Cytiva, Sweden). For representative values of compounds used in cell-based studies, see Supplementary table 3 legend. Each compound was measured for its binding characteristics to an immobilized target as well as non-specific interactions with decoy proteins, e.g., glutathione, and a blank sensor chip surface. Ogg1 specificity is addressed by subtracting the binding response from a reference cell (Neutravidin surface) from the surface containing the target protein (OGG1 plus Neutravadin surface).
Samples were prepared in 20 mM Tris–HCl, pH 7.5, containing 150 mM NaCl, 0.1 mM TCEP, 2% DMSO-D6 (99.9 atom %D) and 20% D2O (99.9 atom %D). Line broadening of a single fluorine-containing OGG1 activator (compound VI, 100 μM) upon binding to OGG1 (0–24 μM) was monitored at 564.17 MHz by 19F-NMR (Varian Unity INOVATM 600 system, Agilent Technologies, Santa Clara, CA). Line narrowing resulting from displacement of the bound fluorine-containing compound was also measured in the presence of a potential competitive displacement compound e.g., compound VII (100 μM). 19F-NMR spectra were recorded using a 5 mm fluorine probe, regulated at 20 °C and the following parameters: 128 K complex data points, sweep width of 139,860 Hz, acquisition time of 0.469 s per scan, 384 scans and a relaxation delay of 1.85 s. Prior to Fourier transformation, sensitivity and resolution were enhanced by applying an exponential line broadening of 1 Hz over the first 128 K data points and zero filled to 512 K data points. Spectra were analyzed using in-house data analysis software.
To identify potential small molecule binding sites, mixed probe molecular dynamics were carried out as previously described65 using the published OGG1 crystal structure66. The simulation was carried out with a box of 80% water and 20% probes (14% isopropanol with 2% each of acetamide, isopropylamine, and acetate plus one sodium counterion to neutralize charge)24. An equilibration phase of 1.5 ns was followed by a 40 ns simulation. The threshold for a site to be a potential binding “hot-spot” was set to < -1 kcal/mol. Modeling small molecule interactions with OGG1 was accomplished using GlideXP67 as implemented in the 2017–4.11 Schrodinger Suite with OPLS200568 forcefield. OGG1 from the crystal structure24 was protonated (pH 7.4), whereas missing rotamers and contiguous gaps less than 5 amino acids were rebuilt using Prime69. Crystallographic waters greater than 5Å from the nearest sidechain were removed. For docking experiments, protein grids centered at each hot-spot were prepared (box length = 10Å—14Å, depending on pocket solvent exposure) and a rigid receptor was used. Ligands were protonated and tautomerized to pH 7 (± 2) with those having a probability > 5% kept as distinct entities for docking with up to 500 conformations/ligand. Each minimized docked pose was visually inspected. Those with nonsensical interactions or obviously strained geometries were removed. Docking-induced strain was calculated by assessing the distance between global and local minima (OPLS2005).
Type II alveolar epithelial cells, A549 (ATCC; Manassas, VA), were grown to sub-confluence as described previously27 using complete Ham’s F12 medium with 10% heat-inactivated fetal bovine serum (FBS), and GlutaMAX™ supplement (Life Technologies, Carlsbad, CA) in O2:CO2; 95:5% at 37 °C. For sub-culture, the cells were treated with Trypsin/EDTA (Lonza Inc., Walkersville, MD), counted (Trypan blue, Life Technologies, Carlsbad, CA), and seeded (100,000 cells/ml in 96-well plates). Oxidative stress was invoked by paraquat (N, N′-dimethyl- 4,4′-bipyridinium dichloride) at varying concentrations (0.01–3 mM) and incubation periods (refer to figure legends). PQ was dissolved in Dulbecco’s phosphate buffered saline and stored in aliquots (1 M, − 20 °C) until use when they were thawed and diluted in cell culture medium. Unless stated otherwise, OGG1 activators were incubated with cells for 4 h prior to treatment with PQ. All measures were performed in triplicate on three independent occasions unless stated otherwise. For specific details describing the immunofluorescence staining and quantification please refer to the Supplemental materials.
Mouse embryonic fibroblasts (MEFs) were grown in Dulbecco’s Modified Eagle Media (25 mM glucose with pyruvate; ThermoFisher, Waltham, MA) with 10% FBS at 5% CO2 at 37 °C. For sub-culture, cells were trypsinized (ThermoFisher, Waltham, MA), counted using a cytosmart cell counter (Corning, Corning, NY), and 100,000 cells were plated per well in 12-well plates. Cells were cultured for 24 h prior to a 4 h treatment with 30 µM compound (in DMSO) or vehicle. For hydrogen peroxide (H202) treatments, the stimulus concentration was determined by the absorbance at 240 nm (1.31 = 30 mM H202) and adjusted in calculations. Cells were washed with PBS and exposed to 400 µM H202 in DMEM without FBS for 15 min. At that time, H202 was neutralized by the addition of an equal volume of DMEM with 2X FBS, all media removed, cells washed with PBS, and warm DMEM with FBS added for the indicated recovery time. To collect cells, plates were washed with PBS, trypsinized and collected by centrifugation prior to flash freezing in liquid nitrogen. All samples were collected and kept at -80˚C until analysis for mtDNA determination. MEFs were kindly provided by Dr. Mark Gladwin, University of Pittsburgh Medical Center. All work regarding the collection of the MEFs were conducted in accordance with Institutional Policy on the Care, Welfare and Treatment of Laboratory Animals and were reviewed by the Institutional Animal Care and Use Committee using an ethical review process at the institution where the work was performed.
MEFs pellets were rapidly thawed and digested with SDS/proteinase K as previously described70. After freeze–thaw of resuspended DNA, total DNA was quantitated by AccuBlue® (Biotium, Freemont, CA) and assayed for relative nuclear DNA (nDNA) levels by quantitative PCR as described71. Samples were adjusted to be within + /- 1 Cq value and assayed in duplex for both mtDNA (mitochondrial NADH-dehydrogenase subunit 1; mt-ND1) and nDNA (HDAC1) against a pooled sample standard curve. Both nuclear and mitochondrial targets were plotted and validated to be in the linear range. Furthermore, ∆Cq values were plotted to assess the effect of dilution on relative mtDNA levels. With these validations in place, we determined the relative mtDNA levels (normalized to nDNA levels).
For mtDNA damage, A549 cells were lysed using the Cells-to-Ct kit (ThermoFisher, Waltham, MA). DNA was isolated, quantified and followed by long and short chain PCR reactions according to published methods34,72. Long-chain PCR was conducted using the 8.9 kilobase mtDNA fragment and primers (IDT, Research Triangle Park, NC) with accession numbers 14841 and 5999; and for short-chain PCR using the small mt fragment and accession numbers 14620 and 1484134. The PCR product was quantified using PicoGreen™ (Life Technologies, Carlsbad, CA). Fluorescence intensity of the long-chain was subtracted from that of the short-chain and expressed as a percent of the untreated control.
Adenosine triphosphate (ATP) and adenosine diphosphate (ADP) levels in A549 cells cultured in 6-well plates were measured following treatment with or without PQ (0–3 mM, plus or minus OGG1 activators) using commercially available kits (BioVision, Milpitas, CA and Abcam, Cambridge, MA, respectively). Samples were collected from separate plates for each metabolite, lysed, stored at − 80 °C for analysis. Perchloric acid (4 M) extracts were prepared, neutralized and fluorescence intensity (ATP, ex/em:535/587 nm, ADP, ex/em:535/587 nm) was monitored using an Envision Multi-label plate reader (Perkin Elmer, Waltham, MA). ATP and ADP levels were normalized to protein concentration (Bradford, BIO-RAD, Hercules, CA).
Data represents mean ± SEM unless stated otherwise. Initial rates were analyzed using a least-squares analysis. Comparisons were made by ANOVA with Dunnett’s post-hoc analysis or one-or two-way students’ t-test using GraphPad Prism. Minimal statistical significance was set at p < 0.05.
All data generated or analyzed during this study are included in this published article (and its Supplementary information files) or are available from the corresponding author.
Barnes, D. E. & Lindahl, T. Repair and genetic consequences of endogenous DNA base damage in mammalian cells. Annu. Rev. Genet. 38, 445–476 (2004).
CAS PubMed Article Google Scholar
Radak, Z. & Boldogh, I. 8-oxo-7,8-dihydroguanine: Link to gene expression, aging and defense against oxidative stress. Free Radic. Biol. Med. 49, 587–596 (2010).
CAS PubMed PubMed Central Article Google Scholar
David, S. S., O’Shea, V. L. & Kundu, S. Base excision repair of oxidative DNA damage. Nature 447, 941–950 (2007).
ADS CAS PubMed PubMed Central Article Google Scholar
Peoples, M. C. & Karnes, H. T. Recent developments in analytical methodology for 8-hydroxy-2′-deoxyguanosine and related compounds. J. Chromatogr. B 827, 5–15 (2005).
CAS Article Google Scholar
Shibutani, S., Takeshita, M. & Grollman, A. P. Insertion of specific bases during DNA synthesis past the oxidation-damaged base 8-oxodG. Nature 394, 431–434 (1991).
ADS Article Google Scholar
Grollman, A. P. & Moriya, M. Mutagenesis by 8-oxoguanine: An enemy within. Trends Genet. 9, 246–249 (1993).
CAS PubMed Article Google Scholar
Kalyani, R. R., Corriere, M. & Ferrucci, L. Age-related and disease-related muscle loss: The effect of diabetes, obesity, and other diseases. Lancet Diabetes Endocrinol. 2, 819–829 (2014).
PubMed PubMed Central Article Google Scholar
Sheng, Z. et al. 8-Oxoguanine causes neurodegeneration during MUTYH-mediated DNA base excision repair. J. Clin. Investig. 122, 4344–4361 (2012).
CAS PubMed PubMed Central Article Google Scholar
Pastukh, V. M. et al. Oxidative DNA damage in lung tissue from patients with COPD is clustered in functionally significant sequences. Int. J. Chronic Obstr. Pulm. Dis. 6, 209–217 (2011).
CAS Google Scholar
Cooke, M. S., Evans, M. D., Dizdaroglu, M. & Lunec, J. Oxidative DNA damage: Mechanisms, mutation, and disease. FASEB J. 17, 1195–1214 (2003).
CAS PubMed Article Google Scholar
Simone, S., Gorin, Y., Velagapudi, C., Abboud, H. E. & Habib, S. L. Mechanism of oxidative DNA damage in diabetes-tuberin inactivation and downregulation of DNA repair enzyme 8-oxo-7,8-dihydro-2-deoxyguanosine-DNA glycosylase. Diabetes 57, 2626–2636 (2008).
CAS PubMed PubMed Central Article Google Scholar
Ide, T. Mitochondrial DNA damage and dysfunction associated with oxidative stress in failing hearts after myocardial infarction. Circ. Res. 88, 529–535 (2001).
CAS PubMed Article Google Scholar
Vlahopoulos, S., Adamaki, M., Khoury, N., Zoumpourlis, V. & Boldogh, I. Roles of DNA repair enzyme OGG1 in innate immunity and its significance for lung cancer. Pharmacol. Ther. 194, 59–72 (2018).
PubMed PubMed Central Article Google Scholar
Krokan, H. E. & Bjørås, M. Base excision repair. Cold Spring Harb. Perspect. Biol. 5, 1–22 (2013).
Article Google Scholar
Zharkov, D. O. Base excision DNA repair. Cell. Mol. Life Sci. 65, 1544–1565 (2008).
CAS PubMed Article Google Scholar
Robertson, A. B., Klungland, A., Rognes, T. & Leiros, I. Base excision repair: The long and short of it. Cell. Mol. Life Sci. 66, 981–993 (2009).
CAS PubMed Article Google Scholar
Ruchko, M. V., Gorodnya, O. M., Zuleta, A., Pastukh, V. M. & Gillespie, M. N. The DNA glycosylase, Ogg1, defends against oxidant-induced mtDNA damage and apoptosis in pulmonary artery endothelial cells. Free Radic. Biol. Med. 50, 1107–1113 (2011).
CAS PubMed Article Google Scholar
Komakula, S. S. B. et al. The DNA repair protein OGG1 protects against obesity by altering mitochondrial energetics in white adipose tissue. Sci. Rep. 8, 14886. https://doi.org/10.1038/s41598-018-33151-1 (2018).
ADS CAS Article PubMed PubMed Central Google Scholar
Tan, Y. B. et al. Pharmacological Protection of mitochondrial DNA integrity may afford a new strategy for suppressing lung ischemia-reperfusion injury. Ann. Am. Thorac. Soc 14(3), S210–S215 (2017).
PubMed PubMed Central Article Google Scholar
Torres-Gonzalez, M., Gawlowski, T., Kocalis, H., Scott, B. T. & Dillmann, W. H. Mitochondrial 8-oxoguanine glycosylase decreases mitochondrial fragmentation and improves mitochondrial function in H9C2 cells under oxidative stress conditions. Am. J. Physiol. Cell Physiol. 306, C221–C229 (2014).
CAS PubMed Article Google Scholar
Yuzefovych, L. V. et al. Alteration of mitochondrial function and insulin sensitivity in primary mouse skeletal muscle cells isolated from transgenic and knockout mice: Role of OGG1. Endocrinology 154(8), 2640–2649 (2013).
CAS PubMed PubMed Central Article Google Scholar
Nash, H. M., Lu, L., Lane, W. S. & Verdine, G. L. The critical active-site amine of the human 8-oxoguanine DNA glycosylase, hOgg1: Direct identification, ablation and chemical reconstitution. Chem. Biol. 4, 693–702 (1997).
CAS PubMed Article Google Scholar
Tyugshev, T. E. et al. Roles of active-site amino acid residues in specific recognition of DNA lesions by human 8-oxoguanine-DNA glycosylase (OGG1). J. Phys. Chem. B 123, 4878–4887 (2019).
Article Google Scholar
Fromme, J. C., Bruner, S. D., Yang, W., Karplus, M. & Verdine, G. L. Product-assisted catalysis in base-excision DNA repair. Nature Struct. Biol. 10, 204–211 (2003).
CAS PubMed Article Google Scholar
Kuznetsov, N. A. et al. Kinetics of substrate recognition and cleavage by human 8-oxoguanine-DNA glycosylase. Nucl. Acids Res. 33(12), 3919–3931 (2005).
CAS PubMed PubMed Central Article Google Scholar
Boldogh, I. et al. Activation of ras signaling pathway by 8-oxoguanine DNA glycosylase bound to its excision product, 8-oxoguanine. J. Biol. Chem. 287, 20769–20773 (2012).
CAS PubMed PubMed Central Article Google Scholar
Baptiste, B. A. et al. Enhanced mitochondrial DNA repair of the common disease-associated variant, Ser326Cys, of hOGG1 through small molecule intervention. Free Radic. Biol. Med. 124, 149–162 (2018).
CAS PubMed PubMed Central Article Google Scholar
Mirbahai, L. et al. Use of a molecular beacon to track the activity of base excision repair protein OGG1 in live cells. DNA Repair 9, 144–152 (2010).
CAS PubMed Article Google Scholar
Banerjee, A., Yang, W., Karplus, M. & Verdine, G. L. Structure of a repair enzyme interrogating undamaged DNA elucidates recognition of damaged DNA. Nature 434, 612–618 (2005).
ADS CAS PubMed Article Google Scholar
Cocheme, H. M. & Murphy, M. P. Complex I is the major site of mitochondrial superoxide production by paraquat. J. Biol. Chem. 283(4), 1786–1798 (2008).
CAS PubMed Article Google Scholar
Dwyer, Z. et al. Characterizing the protracted neurobiological and neuroanatomical effects of paraquat in a murine model of Parkinson’s disease. Neurobiol. Aging 100, 11–21 (2021).
CAS PubMed Article Google Scholar
Subbiah, R. & Tiwari, R. R. The herbicide paraquat-induced molecular mechanisms in the development of acute lung injury and lung fibrosis. Crit. Rev. Toxicol. 51(1), 36–64 (2021).
CAS PubMed Article Google Scholar
West, A. P. & Shadel, G. S. Mitochondrial DNA in innate immune responses and inflammatory pathology. Nat. Rev. Immunol. 17(6), 363–375 (2017).
CAS PubMed PubMed Central Article Google Scholar
Furda, A., Marrangoni, A. M., Lokshin, A. & Van Houten, B. Oxidants and not alkylating agents induce rapid mtDNA loss and mitochondrial dysfunction. DNA Repair (Amst) 11, 684–692 (2012).
CAS Article Google Scholar
Chen, N. et al. Drp1-mediated mitochondrial fission contributes to mitophagy in paraquat-induced neuronal cell damage. Environ. Pollut. 272, 116413–116426 (2021).
CAS PubMed Article Google Scholar
Akbari, M. et al. Overexpression of DNA ligase III in mitochondria protects cells against oxidative stress and improves mitochondrial DNA base excision repair. DNA Repair (Amst) 16, 44–53 (2014).
CAS Article Google Scholar
Kobayashi, T. J., Yokota, R. & Aihara, K. Feedback regulation and Its efficiency in biochemical networks. J. Stat. Phys. 162, 1425–1449 (2016).
ADS MathSciNet MATH Article Google Scholar
Dalhus, B. et al. Separation-of-function mutants unravel the dual-reaction mode of human 8-oxoguanine dna glycosylase. Structure 19, 117–127 (2011).
CAS PubMed Article Google Scholar
Liu, D. et al. Evidence that OGG1 glycosylase protects neurons against oxidative DNA damage and cell death under ischemic conditions. J. Cerebr. Blood Flow Metab. 31, 680–692 (2011).
CAS Article Google Scholar
Kuznetsov, N. A. et al. Kinetic conformational analysis of human 8-oxoguanine-DNA glycosylase. J. Biol. Chem. 282, 1029–1038 (2007).
CAS PubMed Article Google Scholar
Norman, D. P. G., Chung, S. J. & Verdine, G. L. Structural and biochemical exploration of a critical amino acid in human 8-oxoguanine glycosylase. Biochemistry 42, 1564–1572 (2003).
CAS PubMed Article Google Scholar
Riley, J. S. & Tait, S. W. G. Mitochondrial inflammation and immunity. EMBO Rep. 21, e49799 (2020).
CAS PubMed PubMed Central Article Google Scholar
Leon, J. et al. 8-Oxoguanine accumulation in mitochondrial DNA causes mitochondrial dysfunction and impairs neuritogenesis in cultured adult mouse cortical neurons under oxidative conditions. Sci. Rep. 6, 22086 (2016).
ADS CAS PubMed PubMed Central Article Google Scholar
Lia, D. et al. Mitochondrial maintenance under oxidative stress depends on mitochondrially localised α-OGG1. J. Cell Sci. 131, jcs213538 (2018).
PubMed Article Google Scholar
Stuart, J. A., Bourque, B. M., de Souza-Pinto, N. C. & Bohr, V. A. No evidence of mitochondrial respiratory dysfunction in OGG1-null mice deficient in removal of 8-oxodeoxyguanine from mitochondrial DNA. Free Radic. Biol. Med. 38, 737–745 (2005).
CAS PubMed Article Google Scholar
Oka, S. et al. Two distinct pathways of cell death triggered by oxidative damage to nuclear and mitochondrial DNAs. EMBO J. 27, 421–432 (2008).
CAS PubMed PubMed Central Article Google Scholar
Dickinson, A. et al. The regulation of mitochondrial DNA copy number in glioblastoma cells. Cell Death Differ. 20, 1644–1653 (2013).
CAS PubMed PubMed Central Article Google Scholar
Pinz, K. G., Shibutani, S. & Bogenhagen, D. F. Action of mitochondrial DNA Polymerase g at sites of base loss or oxidative damage. J. Biol. Chem. 270(16), 9202–9206 (1995).
CAS PubMed Article Google Scholar
Filograna, R., Mennuni, M., Alsina, D. & Larsson, N. G. Mitochondrial copy number in human disease: The more the better?. Febs Lett. 595, 976–1002 (2021).
CAS PubMed Article Google Scholar
Filograna, R. et al. Modulation of mtDNA copy number ameliorates the pathological consequences of a heteroplasmic mtDNA mutation in the mouse. Sci. Adv. 5, 1–13 (2019).
Article Google Scholar
Tian, Q. et al. Mitochondrial DNA copy number and heteroplasmy load correlate with skeletal muscle oxidative capacity by P31 MR spectroscopy. Aging Cell https://doi.org/10.1111/acel.13487 (2021).
Article PubMed PubMed Central Google Scholar
de Souza-Pinto, N. C. et al. Repair of 8-oxodeoxyguanosine lesions in mitochondrial DNA depends on the oxoguanine DNA glycosylase (OGG1) gene and 8-oxoguanine accumulates in the mitochondrial DNA of OGG1-defective mice. Cancer Res. 61, 5378–5381 (2001).
PubMed Google Scholar
Cardozo-Pelaez, F., Sanchez-Contreras, M. & Nevin, A. B. C. Ogg1 null mice exhibit age-associated loss of the nigrostriatal pathway and increased sensitivity to MPTP. Neurochem. Int. 61(5), 721–730 (2012).
CAS PubMed PubMed Central Article Google Scholar
Sampath, H. et al. 8-Oxoguanine DNA Glycosylase (OGG1) deficiency increases susceptibility to obesity and metabolic dysfunction. PLoS ONE 7(12), e51697 (2012).
ADS CAS PubMed PubMed Central Article Google Scholar
Dincer, Y. et al. DNA repair gene OGG1 polymorphism and its relation with oxidative DNA damage in patients with Alzheimer’s disease. Neurosci. Lett. https://doi.org/10.1016/j.neulet.2019.134362 (2019).
Article PubMed Google Scholar
Corella, D. et al. Effects of the Ser326Cys Polymorphism in the DNA Repair OGG1 Gene on Cancer, Cardiovascular, and all-cause mortality in the predimed study: Modulation by diet. J. Acad. Nutr. Diet. 118(4), 589–605 (2018).
PubMed Article Google Scholar
Bravard, A. et al. Redox Regulation of Human OGG1 Activity in Response to Cellular Oxidative Stress. Mol. Cell. Biol. 26(20), 7430–7436 (2006).
CAS PubMed PubMed Central Article Google Scholar
Bravard, A. et al. Oxidation status of human OGG1-S326C polymorphic variant determines cellular DNA repair capacity. Cancer Res. 69(8), 3642–3649 (2009).
CAS PubMed Article Google Scholar
Michel, M. et al. Small-molecule activation of OGG1 increases oxidative DNA damage repair by gaining a new function. Science 376, 1471–1476 (2022).
CAS PubMed Article Google Scholar
Mabley, J. G. et al. Potential role for 8-oxoguanine DNA glycosylase in regulating inflammation. FASEB J. https://doi.org/10.1096/fj.04-2278fje (2004).
Article PubMed Google Scholar
Visnes, T. et al. Small-molecule inhibitor of OGG1 suppresses proinflammatory gene expression and inflammation. Science 362, 834–839 (2018).
ADS CAS PubMed PubMed Central Article Google Scholar
Hanna, B. M. F., Helleday, T. & Mortusewicz, O. OGG1 inhibitor TH5487 alters OGG1 chromatin dynamics and prevents incisions. Biomolecules. 10(11), 1483. https://doi.org/10.3390/biom10111483 (2020).
CAS Article PubMed Central Google Scholar
Xian, H. et al. Oxidized DNA fragments exit mitochondria via mPTP- and VDAC-dependent channels to activate NLRP3 inflammasome and interferon signaling. Immunity 55, 1–16 (2022).
Article Google Scholar
Panduri, V. et al. Role of mitochondrial hOGG1 and aconitase in oxidant-induced lung epithelial cell apoptosis. Free Radic. Biol. Med. 47(6), 750–759 (2009).
CAS PubMed PubMed Central Article Google Scholar
Bakan, A., Nevins, N., Lakdawala, A. S. & Bahar, I. Druggability assessment of allosteric proteins by dynamics simulations in the presence of probe molecules. J. Chem. Theory Comput. 8, 2435–2447. https://doi.org/10.1021/ct300117j (2012).
CAS Article PubMed PubMed Central Google Scholar
Bjoras, M., Seeberg, E., Luna, L., Pearl, L. H. & Barrett, T. E. Reciprocal “flipping” underlies substrate recognition and catalytic activation by the human 8-oxo-guanine DNA glycosylase. J. Mol. Biol. 317, 171–177 (2002).
CAS PubMed Article Google Scholar
Friesner, R. A. et al. Extra precision glide: Docking and scoring incorporating a model of hydrophobic enclosure for protein-ligand complexes. J. Med. Chem. 49, 6177–6196 (2006).
CAS PubMed Article Google Scholar
Banks, J. L. et al. Integrated modeling program, applied chemical theory (IMPACT). J. Comp. Chem. 26, 1752–1780 (2005).
CAS Article Google Scholar
Jacobson, M. et al. Hierarchical approach to all-atom protein loop prediction. Protein Struct. Funct. Bioinform. 55, 351–367 (2004).
CAS Article Google Scholar
Kolesar J.E. & Kaufman B.A. Using two-dimensional intact mitochondrial DNA (mtDNA) agarose gel electrophoresis (2D-IMAGE) to detect changes in topology associated with mitochondrial replication, transcription, and damage. in Hanada K. (ed)DNA Electrophoresis. Methods in Molecular Biology 2119 https://doi.org/10.1007/978-1-0716-0323-9_3 (Humana, 2020).
Falabella, M. et al. G-quadruplex dynamics contribute to regulation of mitochondrial gene expression. Sci. Rep. 9(1), 5605–5622 (2019).
ADS CAS PubMed PubMed Central Article Google Scholar
Furda, A., Santos, J.H., Meyer, J.N. & Van Houten, B. Quantitative PCR-Based Measurement of nuclear and mitochondrial DNA damage and repair in mammalian cells. in Keohavong P., & Grant S. (eds.) Molecular Toxicology Protocols. Methods in Molecular Biology (Methods and Protocols), 1105, https://doi.org/10.1007/978-1-62703-739-6_31 (Humana Press, 2014).
Dai, Y., Zheng, K., Clark, J. & Swerdlow, R. H. Rapamycin drives selection against a pathogenic heteroplasmic mitochondrial DNA mutation. Hum. Genet. 23, 637–647 (2014).
CAS Google Scholar
Mortusewicz, O., Rothbauer, U., Cardoso, M. C. & Leonhardt, H. Differential recruitment of DNA ligase to DNA repair sites. Nucl. Acids Res. 34, 3523–3532 (2006).
CAS PubMed PubMed Central Article Google Scholar
Download references
The authors acknowledge Elizabeth Ellis, Ph.D. (deceased), Strathclyde Institute of Pharmacy & Biomedical Sciences, Strathclyde University, Glasgow UK for helpful discussions on cell-based studies. For supplemental figure S3, compound VII (F) was synthesized at the Oregon Health & Sciences University Medicinal Chemistry Core and was made available as a kind gift from Professor R. Stephen Lloyd. We are grateful to James F. Callahan, Ph.D., for helpful insights with the manuscript and to Mary Mentzer for LCMS analysis.
This work was supported by the National Institutes of Health [AA123456 to A.B., BB123456 to C.D.]; and the Alcohol & Education Research Council [abcde123456]. Funding for open access charge: National Institutes of Health.
These authors contributed equally: Gaochao Tian and Steven R. Katchur.
GSK, Collegeville, PA, 19426, USA
Gaochao Tian, Steven R. Katchur, Yong Jiang, Jacques Briand, Michael Schaber, Constantine Kreatsoulas, Benjamin Schwartz, Sara Thrall, Alicia M. Davis & William L. Rumsey
Division of Cardiology, Department of Medicine, Center for Metabolism and Mitochondrial Medicine, University of Pittsburgh, Pittsburgh, PA, 15261, USA
Sam Duvall & Brett A. Kaufman
Heart, Lung, and Blood Vascular Medicine Institute, University of Pittsburgh, Pittsburgh, PA, 15261, USA
Sam Duvall & Brett A. Kaufman
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
G.T. and S.R.K. contributed equally and were responsible for conception, design and performance of enzymology and cell-based experiments, respectively. Y.J. provided biological reagents for assay development. J.B. performed NMR studies. M.S., B.S., and S.T. contributed to design of enzymology and biophysical studies. C.K. performed computational evaluation of ligand binding. A.M.D. conducted mtDNA damage assessment. S.D. and B.A.K. performed MEF experiments and mtDNA content determinations. W.L.R. conceived the project and designed cell based studies. W.L.R., G.T., S.R.K. and B.A.K. contributed to writing of the manuscript. All authors reviewed the manuscript.
Correspondence to Gaochao Tian, Steven R. Katchur or William L. Rumsey.
WLR is chief scientific officer, serves on the board and owns stock in Luciole Pharmaceuticals, Inc, a startup company devoted to development of OGG1 activators. All other authors have no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Tian, G., Katchur, S.R., Jiang, Y. et al. Small molecule-mediated allosteric activation of the base excision repair enzyme 8-oxoguanine DNA glycosylase and its impact on mitochondrial function. Sci Rep 12, 14685 (2022). https://doi.org/10.1038/s41598-022-18878-2
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-18878-2
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Advanced search
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.
Libs of TikTok suspended from Twitter in wake of Children’s National Hospital audio recording – The Daily Dot
Illustration by Max Fleishman
David Covucci
Tech
Posted on Aug 29, 2022
On Thursday, Chaya Raichik, the person behind the right-wing account Libs of TikTok, tweeted audio of a conversation she had with employees at Children’s National Hospital that set off a weekend-long firestorm. It ended in her account getting temporarily suspended from Twitter.
Seth Dillon, owner of the conservative satire website Babylon Bee’s owner, posted the news of Libs of TikTok’s account lockout.
Libs of TikTok’s last post appears to be on Friday.
On Thursday, Aug. 25, Libs of TikTok shared audio that caused a right-wing explosion, in which she spoke to at least two employees at Children’s National Hospital and asked them if they would perform hysterectomies on children under the age of 18 to aid in transitioning.
The call came as conservatives have led a charge against children’s hospitals for providing care to trans patients, as part of a moral panic against transgender people, one which Libs of TikTok both spearheaded and egged on.
In the audio, it’s unclear who Raichik speaks to, but she goads them into saying they would conduct hysterectomies on patients under the age of 18.
🚨BREAKING EXCLUSIVE REPORT🚨
.@ChildrensNatl admits in damning audio recording that they do “gender affirming” hysterectomies on minors including 16-year-olds and “younger kids”
Full story here: https://t.co/NLtLoew2lT pic.twitter.com/Izt8sGMgTX
According to the Washington Post, Children’s National Hospital didn’t dispute the accuracy of the audio but said that the employees provided inaccurate information. Conservatives have pointed back to a line on Children’s website, which said the hospital provided gender-affirming care to patients from ages “0-21.”
Children’s Hospital told the Post that the information on its website was also erroneously posted.
But the denials from Children’s National Hospital did not satiate the right-wing crowd stirred up by the audio. It led to a flood of threats against the hospital, which has happened to a number of children’s hospitals that Libs of TikTok and other prominent conservatives posted about this month.
In the wake of the reports about threats being made to the hospital, Libs of TikTok was locked out of her account.
According to Fox News, Libs of TikTok is not allowed to post for a week.
In its message to Libs of TikTok, Twitter noted that “You may not promote violence against, threaten, or harass other people on the basis of race, ethnicity, national origin, sexual orientation, gender, gender identity, religious affiliation, age, disability, or serious disease.”
However, it did not cite specific posts that Libs of TikTok made that brought about the action on her account.
David Covucci is the senior politics and technology editor at the Daily Dot, covering the nexus between Washington and Silicon Valley. His work has appeared in Vice, the Huffington Post, Jezebel, Gothamist, and other publications. He is particularly interested in hearing any tips you have. Reach out at [email protected]
FTC sues broker over sale of sensitive reproductive health and location data
‘The divorce is going rough’: Jeff Bezos shares photo of him eating McDonald’s alone
‘I got sent home because I had to doo-doo’: Amazon driver says his supervisor tracked him down while he used the bathroom
Newsletter: Why does no one eat at Burger King?
Get the Daily Dot in your inbox
Abuse victims of ‘master manipulator’ former Scottish university lecturer receive compensation – STV News
News / Glasgow & West
Kevin O’Gorman was branded a ‘monster’ by abuse victims targeted at two Scottish universities between 2006 and 2014.
Victims of a disgraced former academic branded a “master manipulator” who sexually abused students while employed at two Scottish universities have received five-figure compensation payouts.
Kevin O’Gorman used his position of privilege to carry out the campaign of abuse towards eight young men at the Heriot Watt and Strathclyde institutions between 2006 and 2014.
Several of those involved have now been granted financial settlements set to exceed half a million pounds in the aftermath of his conviction in 2019.
O’Gorman was sentenced to 240 hours of unpaid work and was placed on the sex offenders’ register for five years, despite maintaining his innocence.
He claimed he that he didn’t abuse the students and was instead following a “mindfulness technique” similar to the one used by Adam Smith, the 18th century economist.
However one of his victims, Fraser Blevins, described him as “a monster” adding an independent report commissioned by Strathclyde University was tantamount to “turning a blind eye” to the abuse.
Waiving his right to anonymity, he added: “For many years I blamed myself. It took others coming forward for me to take courage in that and tell my story. Thankfully, I also had the support of my wife and she gave me strength to pursue this.
“I still believe the so-called ‘impartial report’ Strathclyde commissioned was quite frankly a disgrace and a sham – it claims to be an institution aiming to mould future leaders of the world yet the university failed to demonstrate the key characteristics of honesty, integrity and trust.
“They had an opportunity to right the wrongs of O’Gorman yet shirked their responsibility. The university never reached out to me personally at any point, and put me through many sleepless nights having to relive the damage done. I don’t think I can forgive them for their betrayal but I certainly hope to now move on with my life.”
O’Gorman was employed at Strathclyde’s school of management from 2005 until 2012 when he left to join Heriot-Watt as a professor of management.
He later became head of international in the school of social sciences, but was relieved of the role in 2017 following a complaint of sexual misconduct.
It later emerged the institution was aware of allegations against O’Gorman in a report produced by Lord Sandison QC.
A spokesperson for Heriot-Watt university said the institution was “deeply saddened at the distress inflicted on student victims by Dr O’Gorman”.
A spokesperson for the University of Strathclyde said: “Lord Sandison QC conducted a thorough and detailed independent examination of our systems, processes and actions.
“All of the enquiry’s recommendations were taken on in full by the university. The health, safety and well-being of our students and staff are always our first priority and the independent report helped the university to enhance our procedures to safeguard members of our university community.”
Copyright © 2007-2022 STV. All rights reserved.
What ASU alumni are 'Learning from Experience' – ASU News Now
The College of Liberal Arts and Sciences at Arizona State University has launched “Learning from Experience,” a podcast that tackles some of the challenges and decisions that recent graduates face.
Each month, the podcast will feature a new alum from The College, and will share personal stories of successes and failures and tips for navigating the real world after graduation.
The College worked directly with current students to get their feedback on what topics the podcast should cover.
The Emerging Leaders young alumni organization also helped brainstorm podcast content and contributed as some of the podcast’s first guests.
“Our alumni in The College’s Emerging Leaders organization are contributing to student success in diverse and innovative ways. Sharing their career journeys and experiences is one way they can support our students and show our community the unparalleled value and impact of a degree in the liberal arts and sciences,” said Patrick Kenney, dean of The College of Liberal Arts and Sciences and vice provost for academic enterprise strategy at ASU.
English alum Amanda Ventura Zink, political science alum Steven Slugocki and psychology alum Ashlie Temple are featured in the first three podcast episodes.
Listen to the first episode:
Amanda Ventura Zink is currently the public affairs manager for Waymo, where she leads the public education campaign “Let’s Talk Autonomous Driving.”
“There’s not a day that goes by at Waymo where it’s not part of my job to think about how we could be giving back with our technology,” Ventura Zink in her interview.
She provides insights on community engagement, work-life balance and redefining career success.
Listen here:
Steven Slugocki was elected in 2015 as the youngest chairman of the Maricopa County Democratic Party and served in that capacity until 2020.
“I had this extreme high of getting elected and becoming a chair, and then I started to see, almost immediately after, the doubts, the emails, the social media posts, that were like, ‘Hey, this guy is way too young. He’s too wild. He has no experience. He’s never done this before. How did this happen? How did he get in this position?’ Slugocki said.
In his interview, he discusses his experience with imposter syndrome as well as how he prioritized his passion for politics.
Listen here:
Ashlie Temple manages clinical services across five different states as the patient care services manager for Albertsons, Safeway and Vons pharmacies.
“Deciding your career path for what you feel like is the rest of your life can be a really daunting task, Temple said. “I was that way. When I started as an undergrad at ASU I wanted to be a lawyer. I quickly learned that’s not my forte.”
A master’s degree, a doctoral degree and a pharmacy residency later, she shares her personal experience with adapting, pivoting and finding the perfect career fit.
Listen here:
The “Learning from Experience” podcast launches new episodes the first Wednesday of each month. Alumni from The College can reach out to Allison Connell if they wish to be featured in an upcoming episode.
Digital Marketing Manager, The College of Liberal Arts and Sciences
480-965-3787 [email protected]
The new Media and Immersive eXperience Center in downtown Mesa — which opened its doors to students this month as the fall semester began — will put Arizona State University in the top tier of academic filmmaking and media production facilities.The cutting-edge building, called the MIX Center, is capable of producing anything from blockbuster superhero movies to VR videogames — and teaching…
The new Media and Immersive eXperience Center in downtown Mesa — which opened its doors to students this month as the fall semester began — will put Arizona State University in the top tier of academic filmmaking and media production facilities.
The cutting-edge building, called the MIX Center, is capable of producing anything from blockbuster superhero movies to VR videogames — and teaching students the skills they need to succeed in a digital economy.
The MIX Center is part of ASU at Mesa City Center, which also includes an outdoor plaza space with a 100-foot movie screen and The Studios. The Studios at Mesa City Center is a repurposed mid-century building that houses programming and support services for local community entrepreneurs, facilitated by the J. Orrin Edson Entrepreneurship and Innovation Institute.
The MIX Center hosts hundreds of students who will be making films, designing virtual worlds and creating immersive media experiences. It houses The Sidney Poitier New American Film School’s production and post-production programs, plus classes in digital media technology, worldbuilding, experience design and gaming from The Design School and the School of Arts, Media and Engineering (both, like the Poitier Film School, part of the Herberger Institute for Design and the Arts), as well as from the Ira A. Fulton Schools of Engineering and the College of Global Futures.
ASU President Michael Crow said of the building: “There’s nothing that can be imagined that you can’t do here.
“What it means for students is that they will have the foundation to get deeply involved in new industries, in manufacturing, in entertainment, in digital expression. They’ll have every tool imaginable for the digital economy.”
The project is a partnership between ASU and the city of Mesa. The city invested $63.5 million toward the project and managed the design and construction of the building while ASU contributed $33.5 million, which included interior work and high-end equipment. ASU also will pay all operations and maintenance costs for the MIX Center; costs will be shared with the city of Mesa for The Studios.
Mesa Mayor John Giles said that the complex is important to educational attainment in the city.
“Mesa needs to be a college town, and that’s happening,” he said. “Downtown Mesa is a very special place. It has a lot of character and a lot of resources. What we need is a few more people, and with this facility now open, it will be fun to see more activity.”
The Studios and many of the spaces in the MIX Center are fully open to the community, including the fabrication studio.
Crow said that ASU’s presence will help downtown Mesa evolve.
“The downtowns that are most successful are those that have a broad orientation but also have some type of intense creativity going on, and this is a huge catalyst for that,” he said.
Clockwise from left: city of Mesa Mayor John Giles, city of Mesa Manager Chris Brady and ASU President Michael Crow check out a sound studio during a tour of the MIX Center in downtown Mesa on Aug. 16. Photo by Charlie Leight/ASU News
Here are some of the cool things in the MIX Center:
High-tech sound stages: The building has three sound stages with a total of more than 8,000 square feet of Hollywood-level space. Two smaller stages are designed for teaching, and the largest one is built up to full, professional cinematic quality.
“If you came off a Marvel lot in Atlanta and you came here, you wouldn’t find anything missing – the rigging, the power distribution, the acoustic insulation — everything is up to top-of-the-line standards,” said Jake Pinholster, founding director of the MIX Center and executive dean in the Herberger Institute.
“It’s one of the best — if not the best — academic sound stages in the country.”
Two screening rooms: The two rooms, one with 261 seats and one with 76 seats, off the lobby have Dolby Atmos sound and will be used for lectures and post-production work on films as well as public screenings.
“Not only is it the best sound of any movie theater you’ve ever been in, it’s the level of sound where if you finish a movie in here, you get the Dolby Atmos stamp on it at the end,” Pinholster said.
Because there is no movie theater directly in downtown Mesa, the MIX Center will offer public screenings of family, classic and indie films, likely starting late in 2022.
Enhanced immersion studio: This three-story “black box” showcase space is for anything that is not entirely media-based, such as live performances and interactive installations. The studio hosted the MIX Center’s first public performance, “The Most Beautiful Home … Maybe,” an interactive theater experience, earlier this month.
Pinholster said the space is already in high demand.
“There’s a very full schedule for the whole year of different types of installations, other theatrical experiences, escape rooms, virtual reality experiences, 360-degree projections and sound installations.
“This room can do anything at the intersection of the digital and the physical.”
Fabrication lab: A digital fabrication lab, one of the spaces open to the community, can create smaller-scale items with laser cutters, desktop millers and vinyl cutters, as well as several 3D printers.
A production shop down the hall has a computer-controlled plasma cutter, plus a machine that uses a high-pressure jet of water mixed with grit that can precisely cut through metal that’s up to half an inch thick. That space can manufacture larger pieces for theater and film scenes, as well as large-scale public art pieces.
Recording studio: The recording studio has three control rooms, one of which is large enough for teaching 30 students.
The space is large enough for several musicians to record audio, and the studio is set up to teach surround and spatialized audio.
“This room can dynamically switch between Dolby Atmos, for surround sound for cinematic release, and a third-order ambisonic space, which is fully immersive audio, which allows audio to sound not just like it’s coming from anywhere on the perimeter, but actually can be attached to virtual objects in the air and sound like it’s coming right beside your ear,” he said.
“We’re excited to be able to offer that to our students and we’re one of the only places in the country where that’s going to become a regular part of the undergraduate teaching curriculum.”
Foley stage: This part of recording studio, one of the only Foley stages in Arizona, will be used for the process of replacing sound that can’t be captured on location.
The stage is a platform that will contain several different surfaces, including concrete, sand, wood and gravel, to record footsteps and other sounds that are then inserted into a film during post-production.
A Dreamscape Learn classroom: Dreamscape Learn is a multi-user virtual-reality educational platform. The Tempe campus includes two Dreamscape Learn pods plus desktop space. The MIX Center will be the most advanced Dreamscape Learn site, holding 32 learners. The space will be used not only by students and researchers to develop content, but also for the public.
Flexible lobby: The entryway includes space for a café and a multi-purpose exhibition space, plus a community room for local groups to use for classes, workshops, meetings, receptions and exhibitions.
A 32-foot screen in the lobby is responsive to visitors via sensors in the ceiling and will be used for interactive displays.
“The entire building will be a creative space for students,” Pinholster said.
“I’m going to teach a class every semester that is focused on using the building as a canvas, so students will get to do installation work in the lobby, on the big screens, on the gallery walls upstairs,” he said.
Audio systems Technical Director Ryan Pottle talks with students about the MIX Center’s Foley sound room on Aug. 23.
Fourth-year film and media production (directing) student Joe Nixon (right) chats with a couple of his classmates before the start of a Cinematography I class in a green-screen room at the new MIX Center on Aug. 23.
Fourth-year film and media production students Gaby Bhasin (left) and Tory Morentin look at the directory display to find their class on Aug. 23 at the new MIX Center.
Clinical Assistant Professor Nita Blum talks with her Intro to Film Production class, held on a soundstage at the new MIX Center on Aug. 23.
The architecture of the new MIX Center, as seen from its lobby, combines wood and metal.
Much of the building is designed for optimal student access. There are 12 editing bays available 24 hours a day, seven days a week.
“It’s an inclusion issue. A lot of students can’t afford to have their own gear, so having this available 24/7 is really important,” Pinholster said.
Likewise, students can check out equipment in order to shoot on location. The check-out desk is near the loading dock, so students can just pull up, get the gear and load their cars.
“The Poitier School provides them with very high-end professional gear that’s available on a 12-hour-day basis,” he said. “We’re very conscious of giving our students access to everything we can that will give them an industry-standard education.”
Designing the MIX Center was a years-long process, Pinholster said. The team visited nine professional and academic production facilities around the world, including the University of Southern California, the YouTube studios and the Dolby headquarters.
“We tried to see how much of that we could get into this building and, in addition, tried to figure out how to future-proof it that so we have the ability to adapt to things we don’t expect.”
And how does the MIX Center compare to the facilities they visited?
“In the ‘best of’ category,” he said.
“There are places that have stand-out spaces, but in terms of functionality, we’re up there among the best, if not the best.”
Steven Tepper, dean of the Herberger Institute, said the space has the best of today’s technology and is designed to adapt to what’s next.
“You know how special it is just watching people’s faces when they walk in to the MIX — students, community members, faculty, industry professionals. People’s eyes get wide and their jaws drop,” he said.
“Many have told me they only wish they could go back to school and learn in this facility.”
The MIX Center is open to all Herberger Institute students, although with 750 students, the Poitier School will have the largest presence.
Cheryl Boone Isaacs, founding director of The Sidney Poitier New American Film School and a professor of practice, has decades of experience in the film industry.
“The Sidney Poitier New American Film School recognizes and values creativity, and we are putting together the most inclusive, most affordable and most impactful film program for the next generation of cinematic storytellers,” she said.
“The students, faculty and staff are energized and excited about this new space that will allow us to educate and advise students in the practices of contemporary filmmaking and emerging medias.”
The MIX Center in downtown Mesa hosts hundreds of students who will be making films, designing virtual worlds and creating immersive media experiences. Photo by Charlie Leight/ASU News
The Studios is housed on the ground floor of a building that used to be the Mesa Public Library, and then later was used as a data center by the city. The renovation by Mesa in support of ASU’s entrepreneurship programs created an open floor plan and salvaged several parts of the mid-century design. A former patio with a terrazzo spiral staircase has been enclosed with glass walls to create a bright, airy gathering space.
A few segments of the concrete “waves” that had been on the roof were repurposed into a public art installation outside the north side of the building.
Nyasha Stone Sheppard, community manager for The Studios at Mesa City Center, said the space will help develop entrepreneurs, innovators and small businesses at any stage.
“We’re welcoming the community into the space to meet with staff and other entrepreneurial support organizations to develop their ventures,” she said.
The space includes a conference room, a community room, high-top tables for teamwork and alcoves for individual work. Several computer workstations will be added.
The Studios is one of six place-based innovation spaces in the Edson Institute. Like all of the spaces, The Studios will offer services and programming based on what the community needs, Stone Sheppard said.
“We’ll have some programs in the evenings because that’s one thing we hear from our community – ‘There are all of these great workshops in the middle of the workday but I need something in the evening,’” she said.
The building prompted a bit of nostalgia in Giles.
“When I was a kid, this was the beautiful Mesa library, and I have fond memories of spending my summer here and downtown,” he said.
“Architecturally, it’s a beautiful building, and we’re so glad it’s back in the public realm.”
The Studios, which is part of ASU at Mesa City Center, is housed on the ground floor of a building that used to be the Mesa Public Library. Photo by Charlie Leight/ASU News
The outdoor spaces at ASU at Mesa City Center are cool, too. A 100-foot-long screen hangs on the front of the MIX Center and will show movies to people who can sit in the adjacent park.
Even the “back lot” between the MIX Center and The Studios is nice.
“In a normal film production facility, this would be a space for trucks, but we wanted to be a little more lovely than that,” Pinholster said. ASU added hardscaping, seating, shade trees and festoon lights, plus power and plumbing connections for food trucks so it’s a hangout and event space.
Giles said that the Poitier School is poised to become a premier destination for those looking to work in the film industry.
“Mesa, Arizona, will be on the map when it comes to filmmaking and educating filmmakers thanks to ASU. There are future Oscar winners that will come out of this building.”
Top photo: Assistant Professor Philip Klucsarits gives his Cinematography I students a short tour of the 280-seat screening auditorium with its state-of-the-art video editing and audio editing stations on Aug. 23 at the new Media and Immersive eXperience Center at the Mesa City Center. Photo by Charlie Leight/ASU News
Reporter , ASU News
480-727-4503 [email protected]
Contact us
Strategic Use of Music to Support Learning – ATD
Quick. What’s the letter immediately after P in the English alphabet? You’re probably singing the alphabet song to yourself to answer this question. The song is an example of a mnemonic device—an effective tool for helping learners memorize nearly anything. There is something special about this particular device that makes it so unforgettable: music.
Listening to music affects a wide cross section of the brain, including those areas linked to spatial reasoning and navigation. Since these areas are also known to play a role in memory and recall, it’s not a big leap to conclude that music can support or even accelerate the learning process. But how, exactly, does it work? What are some guidelines for including music in your instructional design?
Be sure that the music you choose appeals to your learning audience. Avoid lyrics unless you are using a song as a mnemonic device and have written a specific song to support the memory of your content (like in the alphabet song).
For a practical guide to implementing music in your training, access this wonderful member-only guide by Lenn Millbower.
Margie Meacham, “The Brain Lady,” is a scholar-practitioner in the field of education and learning and president of LearningToGo. She specializes in practical applications for neuroscience to enhance learning and performance. Meacham’s clients include businesses, schools, and universities. She writes a popular blog for the Association of Talent Development and has published two books, Brain Matters: How to Help Anyone Learn Anything Using Neuroscience and The Genius Button: Using Neuroscience to Bring Out Your Inner Genius.
She first became interested in the brain when she went with undiagnosed dyslexia as a child. Although she struggled in the early grades, she eventually taught herself how to overcome the challenge of a slight learning disability and became her high school valedictorian, graduated magna cum laude from Centenary University, and earned her master’s degree in education from Capella University with a 4.0.
Meacham started her professional career in high-tech sales, and when she was promoted to director of training, she discovered her passion for teaching and helping people learn. She became one of the first corporate trainers to use video conferencing and e-learning and started her own consulting company from there. Today she consults for many organizations, helping them design learning experiences that will form new neural connections and marry neuroscience theory with practice.
“I believe we are on the verge of so many wonderful discoveries about how we learn. Understanding what happens in the brain is making us better leaders, teachers, parents, and employees. We have no limits to what we can accomplish with our wonderful brains— the best survival machines ever built.”
—Margie Meacham
You’re Invited to Our Vogue World Screening Party During New York Fashion Week – Vogue
To revist this article, visit My Profile, then View saved stories.
To revist this article, visit My Profile, then View saved stories.
To revist this article, visit My Profile, then View saved stories.
Your New York Fashion Week schedule just got upgraded: Vogue Club is taking over the iconic Gansevoort Hotel Rooftop for an exclusive, members-only cocktail screening of Vogue World, Vogue's first live fashion show!
Inspired by the landmark “Fashion’s New World” portfolio that leads Vogue’s global September Issue—and in honour of Vogue’s 130th anniversary—the Vogue World experience will go beyond the traditional runway show…Don’t miss your chance to be part of the celebrations, alongside fellow Vogue Club members and Vogue editors.
Please note that due to overwhelming demand, we are unable to accommodate guest ticket requests for this particular event. For full Terms and Conditions (including details about the photography, filming, and audio recording that will take place at this event), please see below.
RSVP here
T&C’s:
1. Tickets to the in-person event are free to Vogue Club members but will be limited.
2. Tickets will be issued on a first-come-first-served basis.
3. Tickets will be available to claim on Monday, August 29, 2022 at 12 PM EDT.
4. Live Stream is available on www.vogue.world on event day.
5. Transport and accommodation is not included.
6. Tickets are non-transferable and non-refundable.
7. You must RSVP and receive confirmation from Vogue Club to attend the event.
8. Neither plus-ones nor unregistered members will be permitted to attend the event.
9. Tickets are not to be duplicated for the purposes of falsifying entry.
10. Release: Please note that there will be photography, filming, and audio recording (the “Recordings”) undertaken at the Vogue Club, NYFW Cocktail and Vogue World Screening Event, on September 12th, 2022 (the “Event”). The Recordings may be used by Advance Magazine Publishers Inc and its related and affiliated companies and their respective officers, directors, agents, employees, licensees, subsidiaries, partners, consultants, and contractors (the “Releasees”) throughout the universe, in perpetuity, in any media and format for editorial and commercial purposes, including, but not limited to, in connection with the promotion and advertising of their products and services (including, but not limited to, Vogue Club, the Event, and future events) (the “Uses”). By accepting this invitation, you grant, release, and quit claim to the Releasees the right to use your name, voice, and likeness in the Recordings for the Uses and acknowledge and agree that the Recordings may be used by the Releasees without any limitation or liability.
© 2022 Condé Nast. All rights reserved. Use of this site constitutes acceptance of our User Agreement and Privacy Policy and Cookie Statement and Your California Privacy Rights. Vogue may earn a portion of sales from products that are purchased through our site as part of our Affiliate Partnerships with retailers. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Condé Nast. Ad Choices
CN Fashion & Beauty
DS Audio’s Truly Excellent ES 001 Eccentricity Detection Stabilizer – AnalogPlanet.com
One problem that seems to plague many turntable designers is they frequently start with the assumption that the record you’re going to play on their creation is perfect — as in, it’s flat, smooth, and perfectly centered. Unfortunately, this is rarely true, as most records do have errors of one type or another.
I would argue perfect centering is far more important than having a flat record. [Agreed!—MM] Even the slightest amount of wiggling back and forth as the record spins will cause two distinct problems. For starters, as the cartridge jogs from side to side, the arm’s horizontal motion will be reversing direction every 0.9 seconds, resulting in potential stiction problems with gimbal bearings, and potential azimuth shifts with a unipivot as the stylus drags the arm to the left, and then to the right.
More importantly, an off-center record’s pitch will be constantly wavering up and down every 1.8 seconds. If, for example, you’ve ever looked at a readout from the Dr. Feickert PlatterSpeed app, you will have noticed there’s a green line that shows speed over time, and a yellow line that looks like a sine wave. The green line has been filtered by the app to make it easier to interpret, but the wiggly yellow line represents what you actually hear when you’re listening to the record.
We have solutions to help deal with a lack of flatness, of course. There are clamps, weights, rings, vacuum platters, and even record-flattening machines that can make your record as flat as a mirror, but a lack of perfectly centered records is a problem pretty much all turntable designers have chosen to ignore.
It wasn’t always this way. Forty years ago, Nakamichi offered two models that endeavored to center your records perfectly, using contraptions that would have made Rube Goldberg proud. But now, after nearly 40 years of most everyone ignoring the problem, DS Audio has introduced its solution — namely, the DS Audio ES 001 eccentricity detection stabilizer.
The ES 001 is an intensely clever device that uses LEDs and electronics to determine how off-center your record is, but fixing the problem isn’t always so simple. First of all, an off-center record can be the result of two things. Sometimes, it’s simply that there’s a little play between the turntable’s spindle and the hole, making it pure luck how centered the record is when you drop it onto the platter — but more often, the hole isn’t perfectly concentric with the grooves, due to imperfect positioning of the stamper in the press when the record was made. The ES 001 is perfect for fixing the first problem, though solving the second one might require more drastic measures.
The DS Audio ES 001 (which retails for $6,000) looks a bit like a fancy audiophile record weight, albeit one with a small display screen on top. It has two parts: 1) a base that sits flat on a record’s label, centered on the platter spindle by a clever self-adjusting hole, and 2) the main measuring unit and display, which can rotate freely on the base. To measure your record’s centering, you place the ES 001 on the record with the platter stopped, and then, while holding the top half of the device, you start the platter, and will next be prompted on the screen to start the measurement.
The ES 001’s optical sensors will read any movement in the position of the lead-out groove at the end of the record, then show the results as a plus sign (+) on a target in the display. You then stop the platter and nudge the record by hand to get the plus sign as close to the center of the target as possible. If you’re 100% perfect, you will be rewarded with a message saying, “The center is ok.” If not, you can repeat the test to try and refine your results. The entire process can be done in as little as 30 seconds, but that length of time may vary depending on how long your platter takes to start and stop. Once you’ve got it lined up, you can remove the ES 001 and play the record as is, or you can add a weight of your choice (more about that later).
If the record is pressed accurately and you’re only dealing with a little slop between the spindle and hole, you’re golden. But if the hole is actually a tiny bit off-center, you may have to take matters into your own hands (so to speak). Included in the kit that comes with the ES 001 is a reamer that can be used to expand the record hole a little bit, giving more scope for adjustment. Of course, doing this is non-reversible, so you’re going to have to ask yourself whether you really want to permanently alter your record so you can center it perfectly. I found, in most cases, that even when I couldn’t get a record centered to “The center is ok” standards, I was able to minimize the eccentricity without having to ream out the hole.
Compatibility Options
Before I got the DS Audio ES 001 review sample in hand, I figured my Roksan turntable with its removable spindle would be a perfect match for the device, with plenty of scope to move the record around on the platter as needed. As it turns out, the device needs to be perfectly centered relative to the platter, and that self-adjusting center hole doesn’t get small enough to lock down on the stub left when you take off the Roksan’s spindle. The device will still work on a Roksan or Vertere turntable, but you need to leave the removable spindle cap in place.
Turntables with record-clamping systems can be problematic when used with the ES 001. Most clamps work by placing a washer around the spindle to lift the center of the record, then the clamp flexes the record down onto the platter surface. Because the ES 001 has to sit flat on the record label to work, you will have to remove the lift washer to use it — but once the record has been centered, you have no way to put the washer back without disturbing the record’s position.
This could be a problem with many high-end turntables including SME, Kuzma, Brinkmann, AMG, VPI, and others. You can always carefully replace the ES 001 with a record weight or a simple clamp that doesn’t use a lift washer, but your elaborate clamp may not be compatible. Even with turntables like the Dr. Feickert that don’t use a lift washer, you will need to take care not to shift the record’s position as you screw the clamp into place. I used the ES 001 with my Brinkmann La Grange turntable by simply using its clamp with the lift washer removed, while taking care not to shift the record on the glass platter. (I did not have a vacuum platter turntable available at the time of this review, so I could not try the ES 001 with one of them.)
The Stabilizer Percentages
In a perfect world, the DS Audio ES 001 would have no purpose, but in reality, without correction, pretty much every record will sit on your platter a little off-center. While testing the ES 001, I went through over 100 records to see how bad they were — thankfully, very few were off by more than the center bullseye ring of the display’s target area. In most cases, I could reduce any error by at least 75%, just by manipulating the record within the play around the spindle.
This adjustment can vary a bit, depending on how tight your record spindle is. I found my Thorens TD-125 rarely left any play, while my Technics SL-1200 offered more scope. I did successfully use the reamer on a couple of particularly bad LP examples, but permanently altering my records really cuts against the grain for me. I just can’t do it.
Sonically, a perfectly centered record takes on a lot of the better qualities of an open reel tape, or, dare I say it, a CD. There is a solidity and sure-footed quality that becomes addictive, with no ambiguity in the pitch of each note. This is most obvious with a pitch-stable instrument like a piano, but the effect is quite audible with most instruments. Chords sound more in tune, and harmonically complex. As Linn’s Ivor Tiefenbrun would say, it plays the tune.
Conclusion
The improvements wrought by the DS Audio ES 001 eccentricity detection stabilizer can be quite striking, and this device demonstrates how pointless it is to get too worked up about a turntable’s wow and flutter specs unless you can also address this basic issue. True, something as simple as a tapered spindle, like those used on TechDAS turntables, can go a long way towards fixing the centering problem, albeit in a much-easier-to-implement way.
Though the hurdles I’ve outlined above, plus the device’s hefty $6K price tag, will admittedly limit the ES 001’s appeal for some, I’m quite happy its mere existence will finally get people talking about this fundamental problem with LP playback. Fact is, the DS Audio ES 001 eccentricity detection stabilizer does exactly what it is designed to do. It is simple and quick to use, and it helps remedy a critical record-centering problem I’ve often wished was a bit easier to address.
For More Info
For more information about DS Audio, go here. If you want to order an ES 001, go here, and be sure to scroll down to the USA and Canada section underneath the America & South America header to find out exactly where to do so.
Author bio: Since the mid-1980s Michael Trei has worn several hats in the high-end audio world, at times serving as a retailer, installer, distributor, and writer (his byline often appears in Sound & Vision, in fact). For the last 20 years, he has also offered his services as a high-end turntable setup specialist, working on hundreds of systems a year for both customers and dealers around the globe.
- Log in or register to post comments
To some extent I have been doing something similar for the past 50 years ( manipulating the centre hole of off centre pressings). However this device promises more accuracy. The main problem is that although although it indicates if it is OFF centre finding the correct centre seems still to involve a fair bit of trial and error. Remember too that what is correct for side one may be incorrect for side two especially is misaligned stampers in the press are the cause. Getting both sides of an LP correct could seemingly take a long time – one album an evening :-)?
This is a real problem and it is great to see another attempt to address it. It shows new thinking but the price for what is not an easy solution is off putting but might encourage something with a more realistic tariff.
you put it on the turntable. If you flip sides, you need to do that too. It doesn’t seem it takes that much effort TBH – according to what Mike said it is a relatively quick operation. Also the tool to enlarge the hole does not “correct” the alignment, just makes the hole larger so you have more room to play.
I fully understand your reluctance to ‘alter’ the spindle holes on your records, but I have to ask what good is a record that is ‘off centre’ and plays with the anomalies mentioned in your excellent article? I alter the spindle holes on many records I purchase because this ‘off centre’ defect is widespread throughout the industry. There is nothing (well maybe ‘non fill’) that annoys me more than a spindle hole that is not properly centred. When you start out on this apparent destructive path it can be very daunting. The good news, at least in my experience, is that the more practice you get the better you become at carrying out this alteration in a seamless and invisible manner. Most alterations to the spindle hole are minimal. I have found in many cases that part of the actual paper label has extended over the hole and that has caused the record to rotate eccentrically. The fix is quite simple in this case. My alterations to spindle holes are neat and look exactly like they should. There is no need to make a ‘dog’s dinner’ of a spindle hole to achieve concentricity. You will, however, make mistakes initially when you start this so it is always best to start on a record that is dispensable and unimportant to you. The other option is to buy nothing but Japanese pressed vinyl but that is impractical since nothing was pressed to vinyl there after 1988 or so.
So glad AnalogPlanet has Michael Trei on board for reviews; I can’t think of a better person on all things analog. I love the idea of this tool but wonder how easy and effective it would be to align a record on a suspended table like an LP12.
$6000.00?? Ridiculous I purchased one on Amazon for $60.00 with level. perfect.
Hi Mike, Send me a PM at [email protected] and I’ll send you a paper I have on it. It is basically a step by step instruction on what to do. I use a Round File rather than a Reamer and it works really well. The amount of ‘alteration’ that is needed on the correct part of the spindle hole is mostly very small and it is not even noticeable when done. I am picky about buying records from known bad plants and I pretty much stick with Optimal, Pallas, Record Industry, Vinyl Factory and Dublin Vinyl in Europe. In the U.S., Gotta Groove and RTI, in that order, are my favourite plants. I posted on another forum recently that a start up Irish pressing plant, Dublin Vinyl, in Glasnevin, Dublin presses the best spindle holes I have ever seen. They are totally concentric on both sides and the vinyl is as quiet as a tomb. The plant is using some of the newish Canadian WarmTone presses.
I havn’t bought a record since the mid 80s. Are off center records still a problem or is this for mainly old/used records?
With the sky high prices today I would hope it’s mainly the latter.
Put a record on the platter, put a ring that matches the platter on top to center the record, and play.
Seems like we could solve this problem for the price of a platter ring made to match the platter….hundred bucks?
Of course, you’d like to have an LP that’s both perfectly flat and perfectly centered. However, I don’t see how DS Audio’s ES 001 can function if you’re turntable uses vacuum hold-down like mine does. It may be possible, but Mike’s most excellent review seems to indicate that it would probably take a great deal of fiddling, some of which may result in the inability for the vacuum to function properly, depending on how off-centered the record.
My own experience is that vacuum hold-down has clear sonic advantages, but whether those advantages outweigh those of centering an LP is an open question.
This is a great example of what’s up:
https://www.youtube.com/watch?v=lqUWaChKoEg
Stolen from Engine:
“Well, and regarding excentricity, you can pretty simply calculate the effect, as the speed deviation is directly proportional to the radius deviation. Typically one will tend to apply it to a playback radius of 100 mm, as that makes it easy to calculate and represents roundabout the middle of the LP playback area. So at 100 mm an excentricity of 0.2 mm would already mean a peak wow of +/- 0.2 % (or an RMS wow of that times 0.5^0.5 = ca. +/- 0.141 %). And due to the radius dependence with a playback radius range of ca. 60 to 145 mm one can of course also conclude, that the effect has to be almost 2.42 times as bad near the end of the record than at the beginning.”
The thread I got that from….
https://www.vinylengine.com/turntable_forum/viewtopic.php?f=19&t=100085
to a hundred dollar problem. Are you sure the government didn’t invent it?
Whatever imaginary “problem” you’re throwing $6,000 at, the real problem, at least one that, you know, you can actually hear, is the leftover manufacturing debris that is left on new vinyl these days. At prices reaching $40/LP, we all get to enjoy endless pops and clicks on our $50k rigs. What a joke.
To some extent I have been doing something similar for the past 50 years ( manipulating the centre hole of off centre pressings). However this device promises more accuracy. The main problem is that although although it indicates if it is OFF centre finding the correct centre seems still to involve a fair bit of trial and error. Remember too that what is correct for side one may be incorrect for side two especially is misaligned stampers in the press are the cause. Getting both sides of an LP correct could seemingly take a long time – one album an evening :-)?
This is a real problem and it is great to see another attempt to address it. It shows new thinking but the price for what is not an easy solution is off putting but might encourage something with a more realistic tariff.
you put it on the turntable. If you flip sides, you need to do that too. It doesn’t seem it takes that much effort TBH – according to what Mike said it is a relatively quick operation. Also the tool to enlarge the hole does not “correct” the alignment, just makes the hole larger so you have more room to play.
I fully understand your reluctance to ‘alter’ the spindle holes on your records, but I have to ask what good is a record that is ‘off centre’ and plays with the anomalies mentioned in your excellent article? I alter the spindle holes on many records I purchase because this ‘off centre’ defect is widespread throughout the industry. There is nothing (well maybe ‘non fill’) that annoys me more than a spindle hole that is not properly centred. When you start out on this apparent destructive path it can be very daunting. The good news, at least in my experience, is that the more practice you get the better you become at carrying out this alteration in a seamless and invisible manner. Most alterations to the spindle hole are minimal. I have found in many cases that part of the actual paper label has extended over the hole and that has caused the record to rotate eccentrically. The fix is quite simple in this case. My alterations to spindle holes are neat and look exactly like they should. There is no need to make a ‘dog’s dinner’ of a spindle hole to achieve concentricity. You will, however, make mistakes initially when you start this so it is always best to start on a record that is dispensable and unimportant to you. The other option is to buy nothing but Japanese pressed vinyl but that is impractical since nothing was pressed to vinyl there after 1988 or so.
So glad AnalogPlanet has Michael Trei on board for reviews; I can’t think of a better person on all things analog. I love the idea of this tool but wonder how easy and effective it would be to align a record on a suspended table like an LP12.
$6000.00?? Ridiculous I purchased one on Amazon for $60.00 with level. perfect.
Hi Mike, Send me a PM at [email protected] and I’ll send you a paper I have on it. It is basically a step by step instruction on what to do. I use a Round File rather than a Reamer and it works really well. The amount of ‘alteration’ that is needed on the correct part of the spindle hole is mostly very small and it is not even noticeable when done. I am picky about buying records from known bad plants and I pretty much stick with Optimal, Pallas, Record Industry, Vinyl Factory and Dublin Vinyl in Europe. In the U.S., Gotta Groove and RTI, in that order, are my favourite plants. I posted on another forum recently that a start up Irish pressing plant, Dublin Vinyl, in Glasnevin, Dublin presses the best spindle holes I have ever seen. They are totally concentric on both sides and the vinyl is as quiet as a tomb. The plant is using some of the newish Canadian WarmTone presses.
I havn’t bought a record since the mid 80s. Are off center records still a problem or is this for mainly old/used records?
With the sky high prices today I would hope it’s mainly the latter.
Put a record on the platter, put a ring that matches the platter on top to center the record, and play.
Seems like we could solve this problem for the price of a platter ring made to match the platter….hundred bucks?
Of course, you’d like to have an LP that’s both perfectly flat and perfectly centered. However, I don’t see how DS Audio’s ES 001 can function if you’re turntable uses vacuum hold-down like mine does. It may be possible, but Mike’s most excellent review seems to indicate that it would probably take a great deal of fiddling, some of which may result in the inability for the vacuum to function properly, depending on how off-centered the record.
My own experience is that vacuum hold-down has clear sonic advantages, but whether those advantages outweigh those of centering an LP is an open question.
This is a great example of what’s up:
https://www.youtube.com/watch?v=lqUWaChKoEg
Stolen from Engine:
“Well, and regarding excentricity, you can pretty simply calculate the effect, as the speed deviation is directly proportional to the radius deviation. Typically one will tend to apply it to a playback radius of 100 mm, as that makes it easy to calculate and represents roundabout the middle of the LP playback area. So at 100 mm an excentricity of 0.2 mm would already mean a peak wow of +/- 0.2 % (or an RMS wow of that times 0.5^0.5 = ca. +/- 0.141 %). And due to the radius dependence with a playback radius range of ca. 60 to 145 mm one can of course also conclude, that the effect has to be almost 2.42 times as bad near the end of the record than at the beginning.”
The thread I got that from….
https://www.vinylengine.com/turntable_forum/viewtopic.php?f=19&t=100085
to a hundred dollar problem. Are you sure the government didn’t invent it?
Whatever imaginary “problem” you’re throwing $6,000 at, the real problem, at least one that, you know, you can actually hear, is the leftover manufacturing debris that is left on new vinyl these days. At prices reaching $40/LP, we all get to enjoy endless pops and clicks on our $50k rigs. What a joke.