Blog

Experimental characterization of $${text {H}}_2$$ H 2 /water multiphase flow in heterogeneous sandstone rock at the core scale relevant for underground hydrogen storage (UHS) | Scientific Reports – Nature.com

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 14604 (2022)
Metrics details
Geological porous reservoirs provide the volume capacity needed for large scale underground hydrogen storage (UHS). To effectively exploit these reservoirs for UHS, it is crucial to characterize the hydrogen transport properties inside porous rocks. In this work, for the first time in the community, we have performed ({text {H}}_2)/water multiphase flow experiments at core scale under medical X-ray CT scanner. This has allowed us to directly image the complex transport properties of ({text {H}}_2) when it is injected or retracted from the porous rock. The important effective functions of capillary pressure and relative permeability are also measured, for both drainage and imbibition. The capillary pressure measurements are combined with MICP data to derive a receding contact angle for the ({text {H}}_2)/water/sandstone rock system. The rock core sample is a heterogeneous Berea sandstone (17 cm long and 3.8 cm diameter). Our investigation reveals the interplay between gravitational, capillary, and viscous forces. More specifically, it illustrates complex displacement patterns in the rock, including gravity segregation, enhancement of spreading of ({text {H}}_2) due to capillary barriers, and the formation of fingers/channel during imbibition which lead to significant trapping of hydrogen. These findings shed new light on our fundamental understanding of the transport characteristics of ({text {H}}_2)/water relevant for UHS.
To mitigate climate change a transition towards green energy systems, with renewable energy sources and large scale energy storage, is essential. Renewable energy sources such as solar and wind can generate clean electricity of which the surplus can be used to convert water into hydrogen through electrolysis1. Hydrogen is an attractive energy carrier because of its high specific energy capacity and its clean combustion products2. Large scale energy storage in the form of hydrogen will require volumes much beyond the capacities of surface-based facilities due to its low density3. Geological formations such as salt caverns, depleted hydrocarbon reservoirs and saline aquifers, are able to provide these gigantic volumes4. Hydrogen can be stored in salt caverns with a high degree of purity as it will have limited risk of contamination due to interactions with the existing reservoir fluid and rock salt5. Many geographical locations, however, will not have the required geology of evaporitic formations with suitable thickness and extent to create such caverns1. Porous reservoirs, on the other hand, are geographically abundant and can provide the volume capacity needed for large scale underground hydrogen storage (UHS)1,6,7.
Gasses such as ({text {CH}}_4), air, and ({text {CO}}_2) have been stored safely and successfully underground in depleted reservoirs and saline aquifers. During such gas storage operations, the injected gas displaces the existing reservoir fluids, and buoyantly rises until it reaches the impermeable caprock, after which it will spread laterally until a trap/anticline structure will prevent its lateral escape to allow reproduction1. The experience with UHS in such reservoirs is limited8,9. However, it is expected that the operation of UHS will be much different compared to UGS as the cyclic loading and frequency of injection and reproduction cycles will be determined by the intermittent green energy production. Furthermore, the purity of the gas stream reproduced from the reservoir will play a more important role as sensitivities towards hydrogen impurities in upstream facilities and applications are to be expected10. In addition to these operational differences, hydrogen’s low density and low viscosity could lead to complex interplay of gravitational, capillary and viscous forces, resulting in much different displacement patterns than observed for ({text {CH}}_4), air and ({text {CO}}_2), which could impact the reproduction.
In the case of underground hydrogen storage in saline aquifers, the injected hydrogen (or cushion gas) will initially displace the more viscous and denser reservoir brine during drainage, while during imbibition which involves the reproduction of the hydrogen, the brine will be displacing the less viscous and less dense hydrogen. Unfavourable viscosity contrasts, as observed during drainage, can lead to an unstable displacement front and the formation of complex fingering patterns11. Furthermore, density differences can lead to gravity override and the formation of a gravity tongue12. The displacement patterns are further complexified by rock structure heterogeneity which can lead to channeling of the flow predominantly along heterogeneity layers11,13. Both fingering and channeling can lead to uncontrolled lateral spreading resulting in pockets of unrecoverable hydrogen1.
To assess the feasibility of hydrogen storage in porous reservoirs, a good understanding of the movement of the hydrogen plume is needed during subsequent injection and reproduction cycles. The distribution of hydrogen in the reservoir will depend on the interaction of hydrogen with the existing brine and the reservoir rock. This interaction can be characterized with multiphase flow parameters such as relative permeability and capillary pressure14,15,16, which are important input parameters for reservoir simulators. These multiphase flow parameters depend on the wettability of the system, and the interplay between capillary, viscous and gravitational forces15. Capillary forces are responsible for the immobilization and trapping of the non-wetting phase, which is called residual trapping, resulting in hysteresis in the relative permeability and capillary pressure functions17.
Recently several methods have been used to characterize the wettability relevant to UHS including: (1) indirect contact angle measurements by combining capillary pressure measurements with mercury injection capillary pressure (MICP) data18, (2) the tilted plate experimental technique19, (3) the captive bubble cell approach20,21,22, (4) in-situ 3D micro-CT methods22, (5) microfluidics23,24. Water-wet conditions have been found in each of these studies with contact angles for the ({text {H}}_2)/brine system ranging between [(0^{circ }) and (59.75^{circ })], with higher contact angles obtained for measurements carried out in real sandstone rock cores. Water wet conditions are favourable for UHS as the hydrogen will preferentially flow through the larger pores resulting in a higher relative permeability. This facilitates the injectivity of the reservoir, while the amount of capillary-trapped hydrogen will be smaller25,26. Furthermore, several of these studies showed that similar contact angles were derived for ({text {H}}_2), ({text {CH}}_4), ({text {N}}_2) and ({text {CO}}_2)21,23. Despite similar wettability characteristics, very different multiphase flow parameters, such as relative permeability and capillary pressure, are to be expected for the ({text {H}}_2)/water system compared to other gas/water systems due to the complex interplay of viscous, capillary and gravitational forces.
One approach to derive meaningful relative permeability and capillary pressure functions for UHS is by conducting pore network modeling6 based on the pore-scale interfacial characteristics such as contact angles23. Another approach is to measure these parameters directly during core-flood tests in the laboratory14,15,17. Relative permeability can be measured directly using unsteady27,28 and steady-state15,17,29,30,31 core-flood test techniques. Capillary pressure curves for the ({text {H}}_2)/water/rock system can be derived from MICP data of small rock samples and using the Young-Laplace equation to convert the data from the Hg/air to the ({text {H}}_2)/water system14,18. This requires the interfacial tension and contact angle of both systems. Capillary pressure can be measured directly for the fluid pair of interest and for larger rock cores using the semi-permeable disk technique32,33,34, the modified semi-dynamic technique18,35,36 and the steady-state technique presented by Pini et al.14, which uses the same experimental apparatus as used for the steady-state relative permeability measurement technique15. By combining the capillary pressure measurements for the ({text {H}}_2)/water/rock system with MICP data of the Hg/air/rock system, receding contact angles for the ({text {H}}_2)/water/rock system can be derived18.
Despite the importance of relative permeability and capillary pressure, to date, only the study of Yekta et al.18 has presented direct measurements of these parameters during drainage for the ({text {H}}_2)/water/rock system. A Vosges sandstone was used for these experiments and the steady-state technique29 and modified semi-dynamic technique were applied35,36 to measure relative permeability and capillary pressure, respectively. The experiments were carried out to represent shallow (50 bar—20 (^{circ }{text {C}})) and deep (100 bar—45 (^{circ }{text {C}})) aquifers. The 3D saturation map, indicative of the complex flow behaviour of such systems, was not visualized. Instead, the mass balance method was used for the water saturation measurements. A few observations of the distribution of hydrogen during core-flood tests exists. Higgs et al.22 and Jha et al.37 used X-ray micro CT to visualize the distribution of hydrogen in initially brine saturated Gosford sandstone and Bentheimer sandstone, respectively. The latter study found an initial hydrogen saturation of up to 65(%) and a residual hydrogen saturation after imbibition of 41(%). The work of Al Yaseri et al.38 carried out core-flooding experiments on a larger Fontaineblue sandstone rock sample (5.45 cm long and 3.86 cm in diameter) for both hydrogen and nitrogen. The gas saturations were visualized during drainage and imbibition using Nuclear Magnetic Resonance (NMR) under pressure and temperature that represent shallow reservoirs. Results show significantly lower initial and residual hydrogen saturations, 4(%) and 2(%) respectively, in comparison with nitrogen where the initial and residual saturations were 15(%) and 8(%), respectively, for the same capillary number.
In this study, the flow behaviour of hydrogen in initially water saturated rock is visualized during a core-flood test carried out for a heterogeneous Berea Sandstone core (17 cm in length and 3.8 cm in diameter), for both drainage and imbibition, at (18^{circ }{text {C}}) and 100 bar, using a medical X-ray CT scanner. Furthermore, relative permeability and capillary pressure curves are derived. The initial and residual saturations are measured and presented in an IR plot. The wettabiltity of the system is characterized by combining the capillary pressure measurements with MICP data. This study is the first of its kind, and sheds new light on our understanding of the mm-cm scale transport characteristics of hydrogen in porous rocks, relevant to underground hydrogen storage.
In this study, relative permeability, capillary pressure and residual trapping are measured for the ({text {H}}_2)/water system by carrying out core-flood tests on a heterogeneous Berea Sandstone core for both drainage and imbibition. A medical X-ray CT scanner is used to visualize the distribution of hydrogen in the rock core. The experimental apparatus and procedure are based on the work of Krevor et al.15 and Pini et al.14. Receding contact angles are derived by combining the capillary pressure measurements with MICP data18.
Degassed tap water, hydrogen gas, and a Berea (Liver) sandstone rock core are used in the experiments. The hydrogen gas consists of 99.99 mol% purity ({text {H}}_2) produced by Linde-gas Company. The Berea sandstone rock core is 17 cm in length and 3.8 cm in diameter. The sample is untreated and consist mainly out of quartz (95%)20. Two low porosity bands cut across the core at 4.5 cm and 13.3 cm from the inlet of the core. The permeability (k) of the sample is 203 mD ((2times 10^{-13};{text {m}}^2)) and the porosity is 19.7%. Figure 1 shows the 3D porosity map of the core. The two low porosity bands are clearly visible.
3D porosity map of the core. The two low porosity bands are clearly visible.
The experiments are carried out at (18^{circ };{text {C}}) and a pressure of 100 bar. At these conditions, the viscosity of hydrogen ((mu _{H_2})) and water ((mu _{water})) are (8.88 times 10^{-6}) Pa s and (1.049 times 10^{-3};{text {Pa s}}), while the densities ((rho _{H_2}) and (rho _{water})) are (7.85;{text {kg/m}}^3) and (1003.1;{text {kg/m}}^3), respectively39. This results in a density difference ((Delta rho)) of (995.25;{text {kg/m}}^3). The interfacial tension ((gamma)) is 71.9 mN/m40. The injection rate for the relative permeability measurements is 5 ml/min, which corresponds to a superficial velocity ((nu)) of (7.35 times 10^{-5};{text {m/s}}).
A complex interplay of viscous, capillary and gravitational forces is expected for the ({text {H}}_2)/water/rock system. To describe the different force balances, the pore scale capillary number (Ca), the macroscopic capillary number ((N_{cv})), and the gravity number ((N_{gv})) are used, and defined as41
and
where, L is the length of the core [m], H is the height of the core [m], (p_{c}^*) is a characteristic capillary pressure for which the entry pressure ((p_e=8995)Pa) is used, and g is the acceleration of gravity [m/({text {s}}^2)]. For the conditions of the experiment a Ca of (9.1times 10^{-9}) and (N_{cv}) of (3.24times 10^{2}) is obtained, pointing towards a capillary dominated regime41. The (N_{gv}) is calculated as (1.3times 10^{1}) showing that gravitational forces dominate over viscous forces41. The bond number, i.e.,
determines how the gravitational forces relate to the capillary forces. The (N_B) is (4.1times 10^{-2}) indicating that the capillary forces dominate over the gravitational forces.
At the mm-scale the two-phase displacement behaviour highly depends on the interplay of viscous and capillary forces which can lead to three different displacement regimes: viscous fingering, capillary fingering and stable displacement. This can be characterized by the pore-scale capillary number (Eq. 1) using the viscosity of the displacing phase, and the viscosity ratio42, (M=frac{mu _{2}}{mu _{1}}), where (mu _{1}) is the viscosity of the displacing phase and (mu _{2}) the viscosity of the displaced phase43. Using these definitions the Ca and M of the drainage and imbibition, corresponding to the flowrate of 5ml/min are, respectively, (Ca_{drain} =9.1times 10^{-9}) and (M_{drain}=1.2times 10^{2}) and (Ca_{imb} =1.1times 10^{-6}) and (M_{imb}=8.5times 10^{-3}). Therefore, based on the phase diagrams for drainage and imbibition presented in the work of Guo and Aryana43, the capillary fingering displacement regime can be expected for both drainage and imbibition.
A schematic of the experimental apparatus can be seen in Fig. 2. The outer surface of the rock sample is covered with a 5mm thick layer of epoxy resin to form a barrier for the fluids. The rock sample is placed inside a peek coreholder. The confining pressure in the coreholder is created with a special connection to the inlet line. The pressure is measured at four locations along the core: the inlet, the outlet, 2.25 cm from the inlet, and 2.25 cm from the outlet. The absolute pressure is measured at the outlet and at 2.25 cm from the outlet with two pressure transducers (GE 5000 series—0.2 premium up to 150 bar). Two pressure differential (dP) devices (Deltabar S PMD75 Endress + Hauser) are used to obtain the pressures at the other two locations. To be able to continuously co-inject water and hydrogen into the rock core two pulse-free high-precision piston pumps (Vindum) are used, one for hydrogen and one for water. The inlet end-cap consists of one inlet port located in the center of the end-cap through which both hydrogen and water are injected. The inlet line between the pumps and the inlet end-cap is kept long to equilibrate the water and hydrogen before entering the core. The effluent is collected in a 150 ml collection vessel. The top of the collection vessel is connected to the hydrogen pump to recirculate the hydrogen in the experiment. The bottom of the collection vessel is connected to a back-pressure regulator. The back-pressure is regulated with a large nitrogen cylinder to maintain the pressure of 100 bar in the experiments. The effluent water is collected in a waste container. Fluid saturations are measured using a medical X-ray CT scanner. The slice thickness of the scans is 0.6 mm, while the resolution in the other two dimensions is 0.19 mm resulting in a voxel size of (0.19times 0.19times 0.6) ({text {mm}}^2). A voltage of 140 kV and a current of 250 mA is used. Each of the scans is taken in three-fold and averaged to reduce the random error in CT number. In this experimental configuration, the hydrogen phase is recirculated, while the water pumps are refilled from a large container with degassed tap water. The water is equilibrated with the hydrogen gas in the long inlet lines. As a consequence, the volume of hydrogen gas in the system slowly decreases with time. To ensure that enough hydrogen gas stays within the system, the volume of hydrogen in the system is refilled to a volume of 90ml at the beginning and end of each day.
Schematic of experimental apparatus.
The experimental techniques used to measure steady-state relative permeability and capillary pressure are based on the techniques described in Krevor et al.15 and Pini et al.14, respectively. The experiment consists of four stages: (1) background scans and absolute permeability test, (2) drainage relative permeability measurements, (3) drainage capillary pressure measurements, (4) imbibition relative permeability and residual trapping measurements. Each of these stages are described in detail below.
At the start of the experiment background scans are taken of the dry core at ambient pressure. Next the core is saturated with hydrogen at a pressure of 100 bar. This is done by injecting hydrogen while simultaneously slowly increasing the backpressure to the experimental pressure of 100 bar. Once the experimental pressure of 100 bar is reached background scans of the hydrogen saturated core are taken, after which the pressure is reduced back to ambient pressure. To completely saturate the core with water and remove all the gas, the system is first flushed with ({text {CO}}_2). Next, the outlet of the core is connected to a vacuum pump while injecting water at the inlet. Once the water reaches the vacuum pump, the outlet lines are connected to the back pressure regulator. The pressure is slowly increased to the experimental pressure of 100 bar and background scans of the water saturated core are taken. The background scans of the dry core and water saturated core are used to calculate a 3D porosity map according to
Here, (CT_{water}) and (CT_{dry}) are the voxel level CT numbers [HU] for the water and dry core, respectively. (I_{water}) and (I_{air}) are the CT values [HU] that would have been obtained if water and air were scanned15. The permeability of different sections of the core, as well as the core as a whole, is determined by injecting water for a range of flow rates. Using these flow rates together with the obtained pressure drops in Darcy’s law allows for the calculation of permeability.
The steady-state relative permeability of the hydrogen and water phase can be calculated based on the one-dimensional form of the extended Darcy’s law and the assumption of constant capillary pressure throughout the core31, i.e.,
Here, the subscript i indicates either the water or the hydrogen phase, (q_i) is the phase injection rate [({text {m}}^3)/s], A is the surface area of the inlet of the core [({text {m}}^2)], k is the permeability [({text {m}}^2)], (k_{r,i}) is the phase relative permeability [–], (mu _i) is the phase viscosity [Pa s], and (Delta P) the pressure drop [Pa] across length L [m]. Relative permeability is a function of saturation. To obtain the relative permeability for a range of saturation values, the fractional flow of hydrogen is increased in a step-wise matter to a fractional flow of 100% hydrogen. Scans are taken for each fractional flow once steady-state is reached. For each fractional flow the 3D steady-state saturation map is calculated according to
where, (CT_{exp}) ,(CT_{H_2}) are the voxel level CT numbers [HU] for the core at a particular step in the experiment, and the hydrogen saturated core, respectively. The experimental conditions of the drainage relative permeability measurements can be found in Table 1.
The technique presented in Pini et al.14 measures water pressure at the outlet and gas pressure at the inlet. In our experimental configuration, water pressure is measured at the outlet, while the pressure in the hydrogen phase is measured at the inlet, as well as the two pressure taps at 2.25 cm from the inlet and outlet36. At steady-state, during the injection of 100% hydrogen, no more water is produced from the core, and therefore the assumption can be made that no gradient exists in the water pressure. Therefore, the water pressure will be the same everywhere in the core, and the measured water pressure at the outlet can be used to obtain the capillary pressure ((p_c)) at the three locations in the core where the hydrogen pressure is measured. The capillary pressure is defined as,
where, (p_{nw}) and (p_{w}) are the pressure in the non-wetting and wetting phase, respectively, which in our case are hydrogen and water. To calculate the capillary pressure for a range of saturation values the flow-rate of the 100% hydrogen injection is step-wise increased. For each flow-rate, scans are taken once steady-state is reached. The slice average saturation at the location of the capillary pressure measurement can be calculated using Eq. (7). The experimental conditions of the drainage capillary pressure measurements can be found in Table 1. To extend the capillary pressure curve over the full range of water saturations, and to derive the receding contact angle of the ({text {H}}_2)/water system, the capillary pressure measurements were combined with MICP data of another Berea (Liver) sandstone rock core that was used in the study of Ni et al.17 which had similar porosity (19%) and permeability (200.4 mD) as the Berea (Liver) used in this study. The Hg/air capillary pressure measurements can be converted to the ({text {H}}_2)/water system using the Young-Laplace scaling18, i.e.,
Here, (gamma) is the interfacial tension [mN/m], (theta) is the contact angle [(^circ)]. By fitting Eq. (8) to the capillary pressure measurements, the receding contact angle of the ({text {H}}_2)/water/Berea system can be determined. The interfacial tension and contact angle of the Hg/air system are taken to be 485 mN/m and (140^circ), respectively. The interfacial tension of the ({text {H}}_2)/water system is taken to be 71.9 mN/m40.
The imbibition steady-state relative permeability measurements were carried out twice for two different initial hydrogen saturations. For the first imbibition measurements (Imbibition 1), the saturation in the core obtained at the last point of the drainage capillary pressure measurements was the starting point for imbibition. For the second imbibition measurements (Imbibition 2), 100% hydrogen was injected into the water saturated core at an injection rate of 5ml/min until steady-state was reached, before starting imbibition. This resulted in a lower initial hydrogen saturation ((S_{gi})) as the starting point for imbibition compared to the first imbibition measurements. The steady-state imbibition relative permeability was calculated using Eq. (6). To calculate the imbibition relative permeability for a range of saturation values the fractional flow of water was increased in a step-wise matter to a fractional flow of 100% water. At steady-state, for each fractional flow, scans were taken and saturations were calculated according to Eq. (7). The experimental conditions during each step of the imbibition experiments can be found in Table 1.
The residual gas saturation ((S_{gr})) is determined from the steady-state saturation obtained during the 100% water fractional flow. The trapping ability of the rock is characterized with the linear trapping coefficient (A)17, defined as
High trapping coefficients correspond to a high trapping ability. Low trapping coefficients are favourable for UHS.
Safety aspects are very important when working with hydrogen. The following safety measures are in place: 1. The room is very well ventilated. 2. A hydrogen monitor is installed next to the experiment. 3. The hydrogen cylinder is closed at all times, except for when refilling the hydrogen pump. 4. A maximum volume of 90ml of hydrogen is used which is recirculated in a closed flow loop. This volume is large enough to carry out the experiments, but small enough to pose limited safety risks in a well ventilated lab. 5. At the end of the experiment the hydrogen is discarded into the fume-hood.
The steady-state saturation profiles along the length of the core, for each step during the drainage relative permeability stage of the experiment, are presented in Fig. 3a. The saturation stays relatively constant with distance, however, higher ({text {H}}_2) saturations can be observed before the low porosity bands which act as capillary barriers.
Steady-state saturation profiles along the length of the core. Each subplot indicates a different stage of the experiment. (a) Drainage relative permeability measurements. The water saturation is decreasing with increasing fractional flow of ({text {H}}_2). (b) Drainage capillary pressure measurements. 100% ({text {H}}_2) is injected at different flow-rates. The water saturation is decreasing with increasing flow-rate. (c, d) Imbibition relative permeability measurements for Imbibition 1 and Imbibition 2, respectively. The water saturation increases with decreasing fractional flow of ({text {H}}_2). The dotted line in the saturation profiles of Imbibition 1 and 2 shows the starting point of imbibition. Table 1 shows the experimental conditions during each stage of the experiment.
From the 3D drainage saturation maps which can be seen in Fig. 4 it can be seen that at the inlet the hydrogen flows mainly at the top of the core due to gravity segregation. The low porosity zone at 4.5 cm from the inlet acts as a capillary barrier forcing the hydrogen to spread towards the bottom of the core. As a result the hydrogen is spread more evenly throughout the rest of the core and meaningful multiphase flow parameters can be derived for this region.
Steady-state water saturation maps for each step during Drainage and Imbibition 2.
The drainage relative permeability stage was followed by drainage capillary pressure measurements of which the saturation profiles can be seen in Fig. 3b. The profile with the lowest water saturation was obtained during the last capillary pressure measurement, and formed the starting point of imbibition.
The imbibition relative permeability stage of the experiment was carried out twice. Imbibiton 1 took place immediately after the last capillary pressure measurement. While Imibition 2 started after injection of 100% hydrogen at 5 ml/min into a water saturated core until steady-state was reached. Figure 3c,d show the steady-state saturation profiles for each step for Imbibition 1 and Imbibition 2, respectively. The dotted line shows the saturation at the start of imbibition. It can be seen that the initial ({text {H}}_2) saturation was higher for Imbibition 1 compared to Imbibition 2. For both Imbibition 1 and 2, during the first steps of the imbibiton process the steady-state saturation profiles are constant along the core, however, the water saturation is higher near the inlet. With each step, at steady-state, the water saturation at the inlet is increasing and the region of increased water saturation reaches further down the core. Initially this evolves gradually, however, for both Imbibition 1 and 2, a big change can be observed where the increase in saturation is higher and the region of increased saturation reaches much further down the core. A closer look at the 3D saturation maps, Fig. 4 Imbibition 2, shows that the initial increase in the steady-state saturation profile at the inlet was caused by the formation of fingers which gradually evolved with each step of the experiment. The big change in the steady-state saturation profile is observed when the fingers evolve into a channel as can be seen in Fig. 5. This happened at a fractional flow of 19% hydrogen and 81% water for Imbibition 1 and for a fractional flow of 29% hydrogen and 71% water for Imbibition 2.
Steady-state high water saturation fingers evolving into a high water saturation channel during Imbibition 2.
Despite the low solubility of ({text {H}}_2) in water and the long inlet lines that were used to equilibrate the water with the ({text {H}}_2), it is likely that the observed behaviour is caused by the fact that the injected water was not fully equilibrated with the hydrogen. As a result miscible displacement takes place, where hydrogen is dissolved into the brine which, in combination with capillary fingering, results in the formation of high water saturation fingers. For the low water fractional flows the fingers grow at a very low rate and do not impact the overall flow behaviour, therefore a “pseudo” steady-state is reached and the relative permeability measurements can be made.
However, for high water fractional flows, the water saturation and, consequently, the relative permeability of the water phase in the fingers increases, and a preferential flow path for the water phase is created. In this case, the flow becomes more and more channelized and the fingers evolve into a channel. The pressure drop across the core stabilizes once the channel cuts through the core. However, water is now preferentially flowing through the channel and no meaningful relative permeability measurements can be made.
In the case of miscible displacement in homogeneous porous media, when the injected fluid is more viscous than the ambient fluid, a single dispersive front is to be expected13. The work of Loggia et al.45 showed that in layered heterogeneous media, a single dispersive front is attained when the viscosity ratio is larger than the ratio of permeabilities, while channelling is observed when the viscosity ratio is smaller than the ratio of permeabilities. In our case, at the inlet, imbibition starts with a homogeneous (relative) permeability field as the hydrogen is evenly distributed. During each step of the imbibition stage, the (relative) permeability field for the water phase becomes more heterogeneous near the inlet due to the high water saturation fingers formed by dissolution of hydrogen. Furthermore, the viscosity difference between the injected fluid and the ambient fluid becomes smaller because more hydrogen has been removed from the core. This results into a similar situation as described in the work of Loggia et al.45. Once the relative permeability ratio for the water phase is larger than the viscosity ratio, channels will start to form. The inital water saturation was lower for Imbibition 1, and therefore a higher water fractional flow was needed to reach the situation that allowed for channel formation, compared to Imbibition 2. This shows that, next to fingering due to unstable displacement during the drainage phase1, also channeling during the imbibition phase can result in pockets of unrecoverable hydrogen. In future work, we aim to model the presented experimental study to provide the theoretical understanding behind these observations.
Pressure measurements are taken at four locations along the core. Therefore, relative permeability can be calculated for different sections, and capillary pressure can be calculated for three locations of the core. However, no meaningful multi-phase flow parameters can be obtained for the region at the inlet where the flow of hydrogen and water are segregated. Therefore, the relative permeability measurements presented in this paper are made for the section between 2.25 cm from the inlet and 17 cm from the inlet (outlet), while the capillary pressure measurements are made for the location at 2.25 cm from the outlet.
The relative permeability curves can be seen in Fig. 6a. It can be seen that the cross-over point between the relative permeability curves of both phases is low, indicating that extensive interference between the two phases exists, making it more difficult for both phases to flow. Furthermore, significant hysteresis between the drainage and imbibition curves can be observed for the hydrogen phase, while hysteresis is much less apparent for the water phase. The difference in the relative permeability curves for Imbibition 1 and 2 is the result of the different initial saturation at the start of imbibition. As such, the two imbibition curves form two different scanning curves. The imbibition relative permeability measurements taken after channel formation occurred do not provide meaningful relative permeability data and are indicated by the light shaded markers in Fig. 6a.
(a) Relative permeability curves—Drainage and imbibition. The circles indicate the water relative permeability measurements while the squares are the ({text {H}}_2) relative permeability measurements. In grey are the results for drainage, while in green and yellow the results for Imbibition 1 and 2 are presented, respectively. The lighter shaded green and yellow indicate the measurements that were taken after channel formation occurred. (b) Capillary pressure curve—Drainage. The dashed line shows the fit to MICP data obtained for a Berea (Liver) sandstone rock core with similar permeability and porosity presented in Ni et al.17. A receding contact angle of (45^{circ }) is derived. The black squares are the capillary pressures measured during stage 2: Drainage capillary pressure measurements. The grey squares are the capillary pressures measured during Stage 1: Drainage relative permeability measurements.
The drainage capillary pressure measurements can be seen in Fig. 6b. Capillary pressure measurements were made during Stage 2 where 100% ({text {H}}_2) was injected using a similar approach as described in Pini et al.14. In addition, capillary pressure measurements were also made during the drainage relative permeability stage. In our experimental configuration, ({text {H}}_2) pressure is measured at the pressure tap at 2.25 cm from the outlet during the drainage relative permeability stage (Stage 1). The water pressure at this location was calculated from the water pressure at the outlet, using the average pressure gradient in the core. The capillary pressure measurements made during Stage 1 are indicated in grey. By combining our capillary pressure measurements with MICP data for the Hg/air system obtained for a Berea (Liver) sandstone rock core with similar permeability and porosity presented in Ni et al.17, a receding contact angle of (45^{circ }) was derived. This is in agreement with the contact angles found for the ({text {H}}_2)/brine/rock system in literature22. A comparison between the drainage relative permeability and capillary pressure curves of this study and the study of Yekta et al.18 can be found in the “Supplementary information”.
Figure 7 shows the voxel level residual ({text {H}}_2) saturation as a function of the initial ({text {H}}_2) saturation which is the saturation at the start of Imbibition 2. The different colors show the vertical location in the core: blue is at the top of the core, red is at the bottom of the core where the channel formed. The blue, black and red dashed lines are the best-fit linear trapping relationships for the top of the core (outside channel), the entire core, and the bottom of the core (inside channel), respectively. The grey line indicates the 100% trapping line. The water preferentially flows through the channel and is able to sweep most of the hydrogen in the channel (A = 0.085). However, outside the channel the amount of trapping is very high (A = 0.77). The average linear trapping coefficient of the core is 0.44, suggesting that due to fingering and channel flow a significant amount of hydrogen loss can occur.
IR plot. Initial ({text {H}}_2) saturation at the start of Imbibition 2 versus the trapped ({text {H}}_2) saturation at the end of Imbibition 2. The colored stars are the voxel level ({text {H}}_2) saturation. The color correspond to vertical location in the core. Blue is at the top of the core and red is at the bottom of the core where the channel formed. The blue, black and red dashed lines are the best-fit linear trapping relationships for the top of the core (outside channel), the entire core, and the bottom of the core (inside channel), respectively. The grey line indicates the 100% trapping line.
To characterize the flow behaviour for the ({text {H}}_2)/water system a core flood test was carried out, at (18 {^{circ }{text {C}}}) and 100 bar, on a Berea sandstone rock core, 17 cm in length and 3.8 cm in diameter, for both drainage and imbibition, during which relative permeability and capillary pressure were measured. The obtained multiphase flow parameters provide important input parameters for reservoir simulators to model the behaviour of the hydrogen plume in the reservoir during UHS. The saturation distribution in each step of the experiment was visualized with the use of a medical X-ray CT scanner. By combining the capillary pressure measurements with MICP data a receding contact angle of (45^{circ }) was derived. This is in agreement with in-situ contact angle measurements using micro CT on sandstone rock cores22.
Our work shows that the interplay between gravitational, capillary and viscous forces can lead to complex displacement patterns during UHS in reservoir rock. The high density contrast between the ({text {H}}_2) and water phase can result in gravity segregation. Capillary barriers can counteract this effect, and enhance the spreading of hydrogen. High water saturation fingers can form during imbibition resulting in preferential flow paths for the water phase when these fingers evolve into channels. Outside the channel the trapping of hydrogen is high, while inside the channel an almost perfect sweep occurs. This finger/channel formation could lead to significant trapping of hydrogen during reproduction as part of the hydrogen plume will be bypassed and could potentially have a big impact on the performance of UHS.
To derive meaningful upscaled multiphase flow parameters both the hydrogen and water phases need to flow through the same pore space. As such multiphase flow parameters cannot be accurately derived when gravity segregation and channel flow occurs. Visualization of the saturation distribution is therefore necessary to ensure the validity of relative permeability and capillary pressure measurements for the ({text {H}}_2)/water system.
The experimental CT and pressure data are made available open access to the public at https://gitlab.tudelft.nl/ADMIRE_Public/h2_ct_data.
Heinemann, N. et al. Enabling large-scale hydrogen storage in porous media—The scientific challenges. Energy Environ. Sci. 14, 853–864. https://doi.org/10.1039/D0EE03536J (2021).
CAS  Article  Google Scholar 
Hassanpouryouzband, A., Joonaki, E., Edlmann, K. & Haszeldine, R. S. Offshore geological storage of hydrogen: Is this our best option to achieve net-zero? ACS Energy Lett. 6, 2181–2186. https://doi.org/10.1021/acsenergylett.1c00845 (2021)
Schaber, C., Mazza, P. & Hammerschlag, R. Utility-scale storage of renewable energy. Electr. J. 17, 21–29. https://doi.org/10.1016/j.tej.2004.05.005 (2004).
Article  Google Scholar 
Tarkowski, R. Underground hydrogen storage: Characteristics and prospects. Renew. Sustain. Energy Rev. 105, 86–94. https://doi.org/10.1016/j.rser.2019.01.051 (2019).
CAS  Article  Google Scholar 
Kumar, K. R., Makhmutov, A., Spiers, C. J. & Hajibeygi, H. Geomechanical simulation of energy storage in salt formations. Sci. Rep. 11, 19640. https://doi.org/10.1038/s41598-021-99161-8 (2021).
ADS  CAS  Article  Google Scholar 
Hashemi, L., Blunt, M. & Hajibeygi, H. Pore-scale modelling and sensitivity analyses of hydrogen-brine multiphase flow in geological porous media. Sci. Rep. 11, 8348. https://doi.org/10.1038/s41598-021-87490-7 (2021).
CAS  Article  PubMed  PubMed Central  Google Scholar 
Zivar, D., Kumar, S. & Foroozesh, J. Underground hydrogen storage: A comprehensive review. Int. J. Hydrogen Energy. 46, 23436–23462. https://doi.org/10.1016/j.ijhydene.2020.08.138 (2021). (Hydrogen Separation, Production and Storage.).
CAS  Article  Google Scholar 
Pérez, A., Pérez, E., Dupraz, S. & Bolcich, J. Patagonia wind-hydrogen project: Underground storage and methanation. in 21st World Hydrogen Energy Conference (2016).
RAG. Underground sun storage 2030. Accessed 1 June 2022. https://www.rag-austria.at/forschung-innovation/underground-sun-storage-2030.html (2021).
Laban, M. Hydrogen storage in salt caverns: Chemical modelling and analysis of large-scale hydrogen storage in underground salt caverns. MSc Thesis, TU Delft 1–86 (2020).
Berg, S. & Ott, H. Stability of CO(_2)-brine immiscible displacement. Int. J. Greenhouse Gas Control 11, 188–203. https://doi.org/10.1016/j.ijggc.2012.07.001 (2012).
CAS  Article  Google Scholar 
Nijjer, J. S., Hewitt, D. R. & Neufeld, J. A. Horizontal miscible displacements through porous media: The interplay between viscous fingering and gravity segregation. J. Fluid Mech. 935, A14. https://doi.org/10.1017/jfm.2021.1067 (2022).
ADS  MathSciNet  CAS  Article  MATH  Google Scholar 
Nijjer, J. S., Hewitt, D. R. & Neufeld, J. A. Stable and unstable miscible displacements in layered porous media. J. Fluid Mech. 869, 468–499. https://doi.org/10.1017/jfm.2019.190 (2019).
ADS  MathSciNet  CAS  Article  PubMed  PubMed Central  MATH  Google Scholar 
Pini, R., Krevor, S. C. M. & Benson, S. M. Capillary pressure and heterogeneity for the CO(_2)/water system in sandstone rocks at reservoir conditions. Adv. Water Resources 38, 48–59. https://doi.org/10.1016/j.advwatres.2011.12.007 (2012).
ADS  CAS  Article  Google Scholar 
Krevor, S. C. M., Pini, R., Zuo, L. & Benson, S. M. Relative permeability and trapping of CO(_2) and water in sandstone rocks at reservoir conditions. Water Resources Res.https://doi.org/10.1029/2011WR010859 (2012).
Article  Google Scholar 
Boon, M. & Benson, S. M. A physics-based model to predict the impact of horizontal lamination on CO(_2) plume migration. Adv. Water Resources 150, 103881. https://doi.org/10.1016/j.advwatres.2021.103881 (2021).
CAS  Article  Google Scholar 
Ni, H., Boon, M., Garing, C. & Benson, S. M. Predicting CO(_2) residual trapping ability based on experimental petrophysical properties for different sandstone types. Int. J. Greenhouse Gas Control 86, 158–176. https://doi.org/10.1016/j.ijggc.2019.04.024 (2019).
CAS  Article  Google Scholar 
Yekta, A. E., Manceau, J.-C., Gaboreau, S., Pichavant, M. & Audigane, P. Determination of hydrogen-water relative permeability and capillary pressure in sandstone: Application to underground hydrogen injection in sedimentary formations. Transport Porous Media 122, 333–356. https://doi.org/10.1007/s11242-018-1004-7 (2018). (E2020GL090814 2020GL090814.).
CAS  Article  Google Scholar 
Iglauer, S., Ali, M. & Keshavarz, A. Hydrogen wettability of sandstone reservoirs: Implications for hydrogen geo-storage. Geophys. Res. Lett. 48, e2020GL090814. https://doi.org/10.1029/2020GL090814 (2021) (E2020GL090814 2020GL090814.).
ADS  CAS  Article  Google Scholar 
Hashemi, L., Glerum, W., Farajzadeh, R. & Hajibeygi, H. Contact angle measurement for hydrogen/brine/sandstone system using captive-bubble method relevant for underground hydrogen storage. Adv. Water Resources 154, 103964. https://doi.org/10.1016/j.advwatres.2021.103964 (2021).
CAS  Article  Google Scholar 
Hashemi, L., Boon, M., Glerum, W., Farajzadeh, R. & Hajibeygi, H. A comparative study for H(_2)-CH(_4) mixture wettability in sandstone porous rocks relevant to underground hydrogen storage. Adv. Water Resources 163, 104165. https://doi.org/10.1016/j.advwatres.2022.104165 (2022).
CAS  Article  Google Scholar 
Higgs, S. et al. In-situ hydrogen wettability characterisation for underground hydrogen storage. Int. J. Hydrogen Energy 47, 13062–13075. https://doi.org/10.1016/j.ijhydene.2022.02.022 (2022).
CAS  Article  Google Scholar 
van Rooijen, W., Hashemi, L., Boon, M., Farajzadeh, R. & Hajibeygi, H. Microfluidics-based analysis of dynamic contact angles relevant for underground hydrogen storage. Adv. Water Resources 164, 104221. https://doi.org/10.1016/j.advwatres.2022.104221 (2022).
CAS  Article  Google Scholar 
Lysyy, M., Ersland, G. & Fernø, M. Pore-scale dynamics for underground porous media hydrogen storage. Adv. Water Resources 163, 104167. https://doi.org/10.1016/j.advwatres.2022.104167 (2022).
CAS  Article  Google Scholar 
Alhammadi, A. M., AlRatrout, A., Singh, K., Bijeljic, B. & Blunt, M. J. In-situ characterization of mixed-wettability in a reservoir rock at subsurface conditions. Sci. Rep. 7, 10753. https://doi.org/10.1038/s41598-017-10992-w (2017).
ADS  CAS  Article  PubMed  PubMed Central  Google Scholar 
Arif, M., Lebedev, M., Barifcani, A. & Iglauer, S. CO(_2) storage in carbonates: Wettability of calcite. Int. J. Greenhouse Gas Control 62, 113–121. https://doi.org/10.1016/j.ijggc.2017.04.014 (2017).
CAS  Article  Google Scholar 
Bachu, S. & Bennion, B. Effects of in-situ conditions on relative permeability characteristics of CO(_2)-brine systems. Environ. Geol. 54, 1707–1722. https://doi.org/10.1007/s00254-007-0946-9 (2008).
ADS  CAS  Article  Google Scholar 
Berg, S., Oedai, S. & Ott, H. Displacement and mass transfer between saturated and unsaturated CO(_2)-brine systems in sandstone. Int. J. Greenhouse Gas Control 12, 478–492. https://doi.org/10.1016/j.ijggc.2011.04.005 (2013).
CAS  Article  Google Scholar 
Reynolds, C. A. & Krevor, S. Characterizing flow behavior for gas injection: Relative permeability of CO(_2)-brine and N(_2)-water in heterogeneous rocks. Water Resources Res. 51, 9464–9489. https://doi.org/10.1002/2015WR018046 (2015).
ADS  Article  Google Scholar 
Jackson, S. J., Agada, S., Reynolds, C. A. & Krevor, S. Characterizing drainage multiphase flow in heterogeneous sandstones. Water Resources Res. 54, 3139–3161. https://doi.org/10.1029/2017WR022282 (2018).
ADS  Article  Google Scholar 
Manoorkar, S., Jackson, S. J. & Krevor, S. Observations of the impacts of millimeter- to centimeter-scale heterogeneities on relative permeability and trapping in carbonate rocks. Water Resources Res. 57, e2020WR028597. https://doi.org/10.1029/2020WR028597 (2021) (E2020WR028597 2020WR028597.).
ADS  Article  Google Scholar 
Hassler, G. L. & Brunner, E. Measurement of capillary pressures in small core samples. Trans. AIME 160, 114–123. https://doi.org/10.2118/945114-G (1945).
Article  Google Scholar 
Brown, H. W. Capillary pressure investigations. J. Petrol. Technol. 3, 67–74. https://doi.org/10.2118/951067-G (1951).
Article  Google Scholar 
Pentland, C. H., El-Maghraby, R., Iglauer, S. & Blunt, M. J. Measurements of the capillary trapping of super-critical carbon dioxide in berea sandstone. Geophys. Res. Lett.https://doi.org/10.1029/2011GL046683 (2011).
Article  Google Scholar 
Ramakrishnan, T. S. & Cappiello, A. A new technique to measure static and dynamic properties of a partially saturated porous medium. Chem. Eng. Sci. 46, 1157–1163. https://doi.org/10.1016/0009-2509(91)85109-B (1991).
CAS  Article  Google Scholar 
Lenormand, R., Eisenzimmer, A. & Delaplace, P. Improvements of the semi-dynamic method for capillary pressure measurements. 12–14 (1995).
Jha, N. K. et al. Pore-scale investigation of hydrogen injection in sandstone via X-ray micro-tomography. Int. J. Hydrogen Energy 46, 34822–34829. https://doi.org/10.1016/j.ijhydene.2021.08.042 (2021).
CAS  Article  Google Scholar 
Al-Yaseri, A. et al. Initial and residual trapping of hydrogen and nitrogen in Fontainebleau sandstone using Nuclear Magnetic Resonance core flooding. Int. J. Hydrogen Energy.https://doi.org/10.1016/j.ijhydene.2022.05.059 (2022).
Article  Google Scholar 
Accessed 1 June 2022. https://webbook.nist.gov/chemistry/. NIST Chemistry Webbook.
Chow, Y. T. F., Maitland, G. C. & Trusler, J. P. M. Interfacial tensions of (H(_2)O + H(_2)) and (H(_2)O + CO(_2) + H(_2)) systems at temperatures of (289–448) K and pressures up to 45 MPa. Fluid Phase Equilibria 475, 37–44. https://doi.org/10.1016/j.fluid.2018.07.022 (2018).
CAS  Article  Google Scholar 
Kuo, C.-W. & Benson, S. M. Analytical study of effects of flow rate, capillarity, and gravity on CO(_2)/brine multiphase flow system in horizontal corefloods. SPE J. 18, 708–720. https://doi.org/10.2118/153954-PA (2013).
Article  Google Scholar 
Lenormand, R., Touboul, E. & Zarcone, C. Numerical models and experiments on immiscible displacements in porous media. J. Fluid Mech. 189, 165–187. https://doi.org/10.1017/S0022112088000953 (1988).
ADS  CAS  Article  Google Scholar 
Guo, F. & Aryana, S. A. An experimental investigation of flow regimes in imbibition and drainage using a microfluidic platform. Energies.https://doi.org/10.3390/en12071390 (2019).
Article  Google Scholar 
Sander, R. Compilation of Henry’s law constants (version 4.0) for water as solvent. Atmos. Chem. Phys. 15, 4399–4981. https://doi.org/10.5194/acp-15-4399-2015 (2015).
Loggia, D., Rakotomalala, N., Salin, D. & Yortsos, Y. C. Phase diagram of stable miscible displacements in layered porous media. Europhys. Lett. (EPL) 36, 105–110. https://doi.org/10.1209/epl/i1996-00194-y (1996).
ADS  CAS  Article  MATH  Google Scholar 
Download references
Hadi Hajibeygi and Maartje Boon were sponsored by the Dutch National Science Foundation (NWO) Talent Programme ViDi Project “ADMIRE” (Grant number 17509). We thank all ADMIRE members and its user committee for allowing us publish this paper. This study was conducted in the Laboratory of Geoscience and Engineering at Delft University of Technology. We gratefully thank the technical staff of the Laboratory, specially Michiel Slob and Ellen Meijvogel-de Koning.
Faculty of Civil Engineering and Geosciences, Delft University of Technology, P.O. Box 5048, 2600 GA, Delft, The Netherlands
Maartje Boon & Hadi Hajibeygi
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
M.B.: conceptualization, methodology, experiments, writing—original draft. H.H.: conceptualization, methodology, writing—review and editing, grant acquiring.
Correspondence to Maartje Boon.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Boon, M., Hajibeygi, H. Experimental characterization of ({text {H}}_2)/water multiphase flow in heterogeneous sandstone rock at the core scale relevant for underground hydrogen storage (UHS). Sci Rep 12, 14604 (2022). https://doi.org/10.1038/s41598-022-18759-8
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-18759-8
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Advanced search
Scientific Reports (Sci Rep) ISSN 2045-2322 (online)
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

source

‘Britney was broken. I’ve been broken and it’s horrible’: Elton John on helping Britney Spears sing again – The Guardian

After being freed from her 13-year conservatorship, it was unclear if Spears would ever perform again. Now she’s back with a new duet with John – and calling the shots in the studio
Read the Guardian review of Hold Me Closer
This July, in a small basement studio in Beverly Hills surrounded by candles, coloured lights, keyboards and her new husband, Britney Spears rebooted her music career. Six years since her last album, and nine months since she was freed from the conservatorship that had ruled her life for 13 years, she was at the home studio of producer Andrew Watt, recording her parts for Hold Me Closer – a duet with Elton John which mashes up perhaps his defining hit, 1971’s Tiny Dancer, with his 1992 song The One (and a dash of 1976’s Don’t Go Breaking My Heart).
Spears arrived with her vocals warmed up and determined ideas about her contribution, and nailed the performance in less than two hours. “She sang fantastically,” says John from his house in the south of France. “Everyone was saying they don’t think she can sing any more. But I said, she was brilliant when she started so I think she can. And she did it, and I was so thrilled with what she did.”
Released today, the euphoric Hold Me Closer follows Cold Heart, John’s 2021 duet with Dua Lipa, which combined his hits Rocket Man, Sacrifice, Kiss the Bride and Where’s the Shoorah? and made him the first solo artist to score a UK Top 10 single in six different decades. “I want to do one every year for a fun, happy summer record,” says John. After he and Watt created the new Tiny Dancer remix, they weren’t sure who to invite in as guest vocalist. Then John’s husband, David Furnish, had an idea. “He said it would be wonderful for Britney Spears to do it,” John says, as the pair sit side by side the day after he surprised diners in a Cannes restaurant with an impromptu performance of the song. “I said, that’s a pretty amazing idea. She hadn’t done anything for so long. I’d been following what’s been happening to her for a long time.”
John had been an admirer since day one. “She just put out incredibly brilliant records,” he says. “She sang and danced so beautifully.” They first met at his Aids foundation Oscars viewing party in 2013, and she was “lovely – adorable”. And they had their respective Las Vegas residencies at the same time, her at Planet Hollywood, him at Caesars Palace. But even though they often stayed in the same apartment block, “we didn’t really see each other”, says John.
Given what we now know, it’s hard to imagine many people saw Spears at that time. In her fearsome testimony to a court hearing on her conservatorship in June 2021, Spears said she was punished and put on lithium for rejecting some new choreography during the residency, and likened herself to a slave, earning millions for the controllers of the arrangement, including her father, Jamie Spears, while being allocated a $2,000 weekly allowance herself.
In January 2019, she cancelled the residency and announced an “indefinite work hiatus”. Soon after, the #FreeBritney movement went mainstream, convinced – accurately, it would transpire – that Spears was being exploited and abused. In September 2021, the New York Times released the documentary Framing Britney Spears, detailing her fight with her father. John watched it. “You forget she was the biggest star in the whole world at that time. And to see what happened to her makes me so angry. What happened to her shouldn’t have happened to anybody.”
Spears was freed from her conservatorship by a judge in November 2021. The following month, she said that her experiences had left her scared of the music industry, with no intention of picking up her career. “Not doing my music any more is a way of saying ‘fuck you’,” she wrote on Instagram. But she didn’t need any convincing to join John for the duet, he says.
Spears was going to fly to London to record with John, but she was in the middle of her honeymoon after her wedding to the Iranian American model and actor Sam Asghari – having been restricted from marrying or managing her own birth control under the conservatorship – and so recorded with Watt at his studio in Los Angeles. He had never met her before. When she arrived, they talked about music they loved. “She asked me who my favourite artists were – Prince – and I asked her who hers was. She said Elton John,” says Watt. “The song meant so much to her, and you can hear it in her vocal performance. She’s singing her ass off.”
It was as if no time had passed since Spears last stepped inside a studio, Watt adds. “She was so prepared. She had spent time with the record and knew how she wanted to do it.” To construct the song, he explains meticulously, he took the guitar from Tiny Dancer, originally buried so low in the mix you could hardly hear it, and fiddled with the tempo. Extracting the original bass and strings and speeding them up gave it a disco feel. To amplify that sense of transcendence, he punctuated the song with a scale-climbing, heaven-bound sample of “hold me closer”. And John played new Rhodes piano (those are his original vocals).
Watt is 31, the prime age to have been a huge childhood Spears fan with her posters on his wall. He was now faced with one of the biggest pop stars of all time recording her instantly identifiable, strobing, rasping vocals in the same room. “She’s unbelievable at layering her voice and doubling, which is one of the hardest things to do. She really pushed herself, vocally. Sometimes when you produce, the greatest thing in the world you can do is say nothing, so I just let her do her thing. She’s so good at knowing when she got the right take. She took complete control.”
Spears recorded the falsetto parts first, then the lines where she belts. Watt never had to ask her to do anything, and watched as she exacted her own high standards. “She kept going: ‘Nope, again, again, again.’” Then she had an “amazing idea”, he says. “She wanted to listen to the music a bunch of times and she started doing all her incredible ad libs that make the record so her. Tiny Dancer with her voice is special enough, but then she went through and did all these amazing runs.”
Once they had recorded, Spears was “incredibly specific” about how she wanted her vocals and levels mixed, he says. “She was really collaborative and had really good ideas about the production. She’s an expert in music to make you dance.” (Spears’s primary form of performance in recent years has been posting self-choreographed dance videos to Instagram.) “So many of her records are pop perfection, she worked with the greatest of all time and made timeless pop. We experimented with speeding the record up and turning certain elements of the sound up to get it pumping and make you wanna dance.”
Given how disempowered Spears has said she was in the process of making her own music during the conservatorship, she must have felt liberated to wield her expertise in the studio, I suggest. “We didn’t really get into that,” says Watt. “She came there to sing and record. She’s so pro. And if that was something that she was thinking about, she put it all into the record.”
It was afterwards, John admits, that Spears needed some convincing that releasing the track was the right thing to do. (On 25 August, she tweeted about being “kinda overwhelmed … it’s a big deal to me !!!”) “We had to get her to approve what she did,” he says. “She’s been away so long – there’s a lot of fear there because she’s been betrayed so many times and she hasn’t really been in the public eye officially for so long. We’ve been holding her hand through the whole process, reassuring her that everything’s gonna be alright.
“I’m so excited to be able to do it with her because if it is a big hit, and I think it may be, it will give her so much more confidence than she’s got already and she will realise that people actually love her and care for her and want her to be happy. That’s all anybody in their right mind would want after she went through such a traumatic time.”
John is no stranger to helping musicians experiencing difficulties whether in their personal or professional lives, from George Michael, Robbie Williams and Geri Horner (Halliwell) in the 90s to contemporary artists such as Lewis Capaldi, the xx’s Oliver Sim and Sam Fender. He’s motivated by his memories of his own struggles, he says. “It’s hard when you’re young. Britney was broken. I was broken when I got sober. I was in a terrible place. I’ve been through that broken feeling and it’s horrible. And luckily enough, I’ve been sober for 32 years and it’s the happiest I’ve ever been. Now I’ve got the experience to be able to advise people and help them because I don’t want to see any artists in a dark place. A lot of artists, you’d think they’d have a lot of self-esteem but they don’t, and that’s why we go onstage and we get the applause, and then we come offstage and we’re back to square one.”
He wants musicians to “enjoy what they’re doing and feel that they’re worthwhile”, he says. “They deserve to be happy and to be loved and to have an affirmation from someone like me. When I first went to America, I had affirmations from Leon Russell, George Harrison, the Band, Neil Diamond – it made me so happy. It makes you realise they cared and it gave me validation that what I was doing was OK.”
Peer support is one thing: should the industry be better regulated to support musicians and prevent exploitation? “It’s down to having a good manager for a start,” says John. “Someone who’s with you 24/7, who believes in you. It’s all about reaching out. I never reached out and asked for help because I thought, I’m too proud – it will make me feel weak. A lot of these artists don’t reach out for help, so I find out and ring up and then we get together.
“I don’t really know about the music industry. Everyone’s got a different case. It’s very hard for young musicians today to jumpstart a career. Sam Fender has done it with his second record. Little Simz has been fantastic, but she couldn’t go to America because she didn’t have the money to do her tour, which is a disaster for her because the record is doing quite well in America. So there’s a lot of pressure. It is what it is. But I’m Uncle Elton. They can phone me.”
As for Spears, she tweeted before the release that she’s learning “every day is a clean slate to try and be a better person and do what makes me happy … I want to be fearless like when I was younger.”
“Rehabilitation is such a wonderful thing for anybody,” says John. “And I’m just crossing my fingers that this will restore her confidence in herself to get back into the studio, make more records, and realise that she is bloody good.”
Hold Me Closer is out now.

source

The Dangerous Summer Coming Home – Prelude Press

The Dangerous Summer have released their highly anticipated new album, Coming Home today via Rude Records. The album marks the start of a new era for The Dangerous Summer, who added longtime touring guitarist Withenshaw (ex-Every Avenue) as an official member alongside Zawacki, as well. They recorded with Will Beasley (Turnstile, Asking Alexandria, Emarosa), a protégé of producer Paul Leavitt (All Time Low, Yellowcard, The Used), who worked on a large swath of the band’s catalog. Listen to the album now below.
“We named the album ‘Coming Home’ because it’s about coming back to ourselves,” says vocalist and bassist AJ Perdomo. “A full rock band vibe centered around driving guitars and emotionally heart-wrenching lyrics. It felt like a full-circle moment. It was the first time the four of us got in a room, lived in the studio for almost two months, and dug deep with sleepless nights and everything to get it done. We put everything we had into this record, and we are ready to share it with the world.”

A special vinyl variant is also available through Banquet Records. On October 18, the band will perform and meet fans at an in-store at Banquet Records in Kinsgston. Fans who purchase the album or pre-order through Banquet guarantee access to the event. Learn more HERE.
The Dangerous Summer will also hit the road in support of the album, with dates kicking off on October 22 in Denver, CO with special guests Like Pacific and My Kid Brother. Tickets are on sale now HERE.
October 22 – Denver, CO – Marquis Theatre
October 23 – Salt Lake City, UT – The Beehive
October 25 – Las Vegas, NV – The Usual Place
October 27 – Bakersfield, CA – Temblor
October 28 – San Francisco, CA – Milk Bar
October 29 – Anaheim, CA – Chain Reaction
October 30 – West Hollywood, CA – The Roxy
November 1 – San Diego, CA – House of Blues – Voodoo Room
November 2 – Phoenix, AZ – Rebel Lounge
November 4 – Forth Worth, TX – Ridglea Room
November 5 – Austin, TX – Spider House Ballroom
November 6 – San Antonio, TX – Vibes Underground
November 8 – Orlando, FL – Henao Center
November 9 – West Palm Beach, FL – Respectable Street
November 11 – Atlanta, GA – Vinyl
November 12 – Nashville, TN – The End
November 13 – Columbus, OH – Ace of Cups
November 14 – Pittsburgh, PA – Crafthouse
November 15 – Baltimore, MD – Metro Gallery
November 17 – Easton, PA – One Centre Square
November 18 – Teaneck, NJ – Debonair Music Hall
November 19 – Amityville, NY – Amityville Music Hall
November 20 – Brooklyn, NY – Elsewhere Zone 1
November 22 – Ferndale, MI – The Loving Touch
November 23 – Toronto, ON – Velvet Underground
November 25 – Lakewood, OH – Mahall’s
November 26 – Chicago, IL – Beat Kitchen
Comments are closed.
Type above and press Enter to search. Press Esc to cancel.

source

Watch Federal Reserve Chair Jerome Powell speak live at Jackson Hole – CNBC

Watch Federal Reserve Chair Jerome Powell speak live at Jackson Hole  CNBC
source

Enjaymo Eases Fatigue, Improves Quality of Life, Trial Data Shows… – Cold Agglutinin News


Get regular updates to your inbox.
The results add to previous data that show the therapy prevented hemolysis, anemia, need for blood transfusions
by Marta Figueiredo, PhD |
Enjaymo (sutimlimab-jome) led to clinically relevant reductions in fatigue and improvements in quality of life in adults with primary cold agglutinin disease (CAD), according to additional six-month data from Part A of the Phase 3 CARDINAL trial.
These benefits in several patient-reported outcomes add to previously reported data showing the therapy prevented red blood cell destruction (hemolysis), anemia, and the need for blood transfusions, which supported its approval in the U.S. Health authorities in Europe and Japan are also deciding whether to approve the therapy to treat CAD.
These findings further support Enjaymo’s therapeutic potential in this patient population.
The data were detailed in the study, “Sutimlimab improves quality of life in patients with cold agglutinin disease: results of patient-reported outcomes from the CARDINAL study,” published in Annals of Hematology.
In CAD, the immune system produces self-reactive antibodies that bind to red blood cells when exposed to cold temperatures, promoting immune reactions that result in their destruction.
This ultimately leads to hemolytic anemia — a blood disorder wherein red blood cells are destroyed faster than they can be replaced — which is responsible for most CAD symptoms.
CAD is also associated with poor quality of life, with patients showing fatigue levels “comparable to chronic illnesses such as cancer and other hemolytic anemias,” the researchers wrote. The disease usually develops in older adults, increasing the likelihood of simultaneous conditions that may further affect their quality of life.
Previous CAD-related studies rarely included patient-reported outcomes (PROs) of quality of life and fatigue, however. There’s also a limited understanding about the link between treatment-induced reductions in hemolysis and changes in these outcomes.
Part A of the global Phase 3 CARDINAL trial (NCT03347396), which tested six months of treatment with Enjaymo in 24 adults with CAD and a recent history of blood transfusion, included PROs as secondary goals.
Developed by Sanofi’s subsidiary Bioverativ, Enjaymo works by selectively suppressing C1 protein activity. C1 plays a key role in the classical complement pathway, a part of the immune system that’s overactive in CAD and implicated in its associated hemolysis.
The therapy is administered directly into the bloodstream at weight-based doses every week for two weeks, and every other week thereafter.
Previous results showed the therapy safely and rapidly increased hemoglobin levels and reduced the need for blood transfusions — meeting its main goal. Hemoglobin is the protein in red blood cells that transports oxygen throughout the body.
Newly published results concern the impact of Enjaymo on CARDINAL’s PRO-based secondary measures, which included the Functional Assessment of Chronic Illness Therapy (FACIT)-Fatigue Score and in exploratory, health-related quality of life measures.
These comprised the 12-Item Short Form Health Survey (SF-12), which includes physical and mental component scores; the EuroQol 5-dimension 5-level questionnaire (EQ-5D-5L); the Patient Global Impression of Change (PGIC); and the Patient Global Impression of (fatigue) Severity (PGIS).
Data at the study’s start (baseline) showed 91.7% of patients, who had a mean age of 71 (range 55–85), had at least one ongoing/resolved medical history. These included surgical and medical procedures, heart disorders, infections and infestations, and gastrointestinal disorders (all affecting more than 45% of patients).
Also, participants showed severe fatigue and “consistently abnormal measures of QOL [quality of life] at baseline,” the researchers wrote, further emphasizing the poor quality of life of this patient population.
Patients’ mean FACIT-Fatigue scores increased rapidly with Enjaymo treatment from week 1, indicating fewer fatigue symptoms. Scores peaked at week 7 and improvements were sustained through week 26 (about six months), consistently surpassing clinically meaningful thresholds.
Clinically important increases in the FACIT-Fatigue score (of three or more points) were detected in at least 75% of patients. One patient who missed a dose had a FACIT-Fatigue score decline of 44%, which was associated with a rise in classical complement activity by almost 70%.
Clinically meaningful improvements in both SF-12 physical and mental component scores were also detected at week 5 and sustained throughout treatment. These gains were associated with a near-complete reduction in classical complement activity.
Quality of life, as assessed with the EQ-5D-5L, was also considerably improved, with a reduction in the “proportion of patients reporting ‘moderate, severe, or extreme’ (as opposed to ‘no or slight’) problems” after treatment, the research team wrote.
Moreover, 94% of patients who completed the PGIC said they felt treatment had eased their disease and none reported disease worsening. The proportion of patients reporting moderate to severe fatigue in PGIS dropped from 67% to 0% after treatment.
Enjaymo treatment was also associated with a reduction in some CAD-related symptoms and in anemia symptoms. Among the latter, the frequency of fatigue dropped from 75% to 26.3%, weakness from 62.5% to 15.8%, shortness of breath from 54.2% to 15.8%, palpitations from 29.2% to 0%, and chest pain from 8.3% to 5.3%.
“This is the first study to report substantial improvements in PROs for patients receiving classical CP [complement pathway] inhibition therapy for CAD,” the researchers wrote.
While the small patient number limited the analyses’ power to detect statistically significant changes, the study provides strong evidence of Enjaymo’s ability to sustainably lessen fatigue and improve patients’ overall quality of life, they said.
The observed improvements in PROs suggest that “classical CP activation and subsequent hemolysis may be key drivers of fatigue and poor QOL in patients with CAD,” the researchers wrote, noting this further supports the effectiveness of Enjaymo and other approaches “targeting upstream CP components in the management of patients with CAD.”
Get regular updates to your inbox.
3 W Garden St
Suite 700
Pensacola, FL 32502
Website: bionews.com
Email: [email protected]
Phone: 1-800-936-1363
This site is strictly a news and information website about the disease. It does not provide medical advice, diagnosis or treatment. This content is not intended to be a substitute for professional medical advice, diagnosis, or treatment. Always seek the advice of your physician or other qualified health provider with any questions you may have regarding a medical condition. Never disregard professional medical advice or delay in seeking it because of something you have read on this website.

source

Thousands Of Free Hip Hop Samples and Packs For Producers and Beatmakers To Download – Magnetic Magazine

Hot Take: Paying money for hip-hop sample packs is overrated.
Because hip hop, unlike genres like E.D.M. or pop, is more about how you use the samples than the actual quality samples themselves, which means that you can get as professional-sounding results from free hip hop samples as you can from sample libraries that cost an arm and a leg.
Need More Free Plugins For Vocal Processing? We Got You…
So we did the hip hop producer and beat maker community a favor and compiled all of the best free drum samples, melody samples, 808 kits, and more into one place so that you can snag them all quickly and easily. So whether you're making lofi, rap, drill music, or anything else, these samples are perfect for you.
Let's dive into the list.
Check Out This Comprehensive Bible Of Free Delay Plugins Right Here
This collection contains a range of Cymatic's most popular samples from various Cymatics packs, making it perfect for trap production. It includes top-quality melodies, drums, F.X., and more. I was influenced by records from artists such as Travis Scott, Young Thug, Lil Baby, Drake, and Lil Uzi.
Snag These Samples Here
Will Fenwick
You must start with a great beat to make music that gets people moving. These club samples will help you create the perfect foundation for your track. With these samples, you can create a driving, energetic club track to get people dancing all night long. These free samples are perfect for hard-hitting tracks that rappers will pay good money to have. Every drum loop is excellent for dance-friendly beats.
Snag These Samples Here
This pack includes 20 different 808 sounds ready to be used in your music. They have been created with the producer in mind, so you won't need to spend time processing them to get the perfect sound. Download free samples through the link below.
Snag These Samples Here
If you are familiar with hip-hop music, you have probably heard of 808 Mafia. This producer team is top-rated, and their beats are in high demand. If you want to produce music in the style of Lex Luger, Southside, and TM88, then you need to download this complete drum kit that includes 440 high-quality classic samples.
If you are looking for a complete and versatile drum bank full of modern and sharp sounds, this 808 Mafia Drum Kit is made for you!
Snag These Samples Here
Will Fenwick
This free set of sub-bass samples will get your beats moving the house and pounding in car stereos. It contains different bass variations to choose from to get that earth-shaking sound. This sample pack contains heavy basses and hip hop drum samples that are sure to catch the attention of fans and artists.
Snag These Samples Here
This pack of Pierre's beats features bass-heavy samples like his usual style. They are all labeled with the key so you can quickly identify them. In addition to the 808 shots, you will find a decent selection of modern trap drums, including claps, cymbals, kicks, percussion sounds, and snares. And just like the rest of the samples in this list, they are royalty-free.
Snag These Samples Here
The 808 Drum Kit contains various drum samples to add to your repertoire. These include 808 Bass, Kicks, Snares, Hats, and Percussion (Claves, Congas, Toms, Cowbells, Maracas, Sticks). 
With such a versatile range of sounds, this kit is perfect for any production style. So why not give it a go and see what you can create? These samples and loops will help you get the job done.
Snag These Samples Here
808 Vol. 1 is a new collection of high-quality 808 Bass Samples designed to give you an edge in your next Hip Hop production. Inspired by Travis Scott, Post Malone, Lil Nas X, J. Cole, Kodak Black & Offset, 808 Vol. 1 was built upon quality research of the 808s they use in their chart-topping hits. 
Surge Sounds' top priority is to provide the best 808 Bass Samples that will push your Hip Hop beats to the next level. 100% Royalty-Free, so you can sell your beats with these 808s.
Snag These Samples Here
This free offering from Samplephonics consists of a group of samples from their fee-based library, "Deep Trap." The complete version features 198 top-notch beat loops and samples in 24-bit. These are the sounds you need if you're making trap music.
Snag These Samples Here
Will Fenwick
This kit contains 8 melodic samples and is inspired by superstar artists such as the Weeknd, Kehlani, Travis Scott, Cubeatz, Pyrex, Pvlace, and Internet Money. These beats are in the new wave style. 
As music evolves, you don't want to fall behind. Each sample was custom-created to give you the best producer experience regarding sound selection. Re-up today and download this kit for free!
Snag These Samples Here
If you're a hip hop producer looking for fresh loops to build a beat around or just need some inspiration, these free loops are perfect for you. They created these loops to help give you new ideas for beats and produce something unique that you can't find anywhere else. 
This sample pack includes 10 W.A.V. samples with catchy, otherworldly melodies!
Snag These Free Samples Here
This pack of 808 bass samples contains 500 royalty-free sounds ready to be used in music production, giving you everything you need to make smooth Hip Hop, Future Bass, Trap, and more. Get creative and go beyond by adding your favorite synths such as Nexus, Sylenth, or any other.
The sound of Warm 808's is inspired by artists such as O.V.O., Dreamville, Travis Scott, Metro Boomin, Lil Wayne, and many others. This pack of five hundred premium quality 808 bass samples makes it easy to find the perfect 808 sound for your music!
Snag These Samples Here
r-loops offers a free collection of Hip Hop, RnB samples in vinyl format. The library contains 89 sounds, including piano, guitar, organ, strings, and brass samples. This library was inspired by top musicians such as Scott Storch and J.U.S.T.I.C.E. League. While these samples work best for lofi genres or beat with a 90s flavor, they are also suitable for many more modern beat-making styles.
Snag These Samples Here
This pack includes over 300 loops, one-shots, and soft sampler patches, all of which exude expert production values and live-sampled musicianship. You'll find everything a hip-hop producer could want in here, from big beats and dreamy synth loops to rock-solid scratches and affected vocals.
You can expect to hear classic keys like Rhodes, organs, B3 Styles, pianos, and Electric Organs – alongside traditional hip hop elements such as guitars, vibes, electric bass, clarinet, harp, trumpets, and more.
Snag These Samples Here
Undoubtedly, Metro Boomin is one of the best beatmakers around. The Drip Kit contains 100 one-shots and tuned 808s inspired by his most successful productions. Grab these hip hop sounds today and put together a hit in no time.
Snag These Samples Here
Will Fenwick
This drum kit includes high-quality drums, one-shots, and melodies that can be imported into your D.A.W.
According to The Kit Plug, this pack of samples was created by Multi-Platinum Music Producers. The format of the samples, W.A.V., is compatible with every D.A.W; including FL studio, pro tools, Ableton, and more.
This drum kit includes 15 808s, ten claps, five crashes, 20 F.X., five open hats, 20 hi-hats, ten kicks, ten percs, ten snares, and ten loops.
Kyle Beats is a popular YouTuber who focuses on creating beats. Andromeda contains 95 high-quality sounds, including 808s, drums, real guitar loops, and vocal chants.
This product contains over 300+ loops and one-shots perfect for Trap or R&B. To learn more, click on the link and watch the demo on YouTube.
Managing Editor at Magnetic Magazine – Former Marketing Manager at the Hyperbits Masterclass – Writer, Content Strategist, Music Producer, and Record Label Manager 

source

Opinion | Leaked audio of a billionaire GOP donor hands Democrats a weapon – The Washington Post

You’ve probably heard that Republicans are dissembling madly about new tax policies in the law President Biden signed this month. The Inflation Reduction Act will boost IRS funding to better target wealthy tax avoiders, and Republicans are pretending this will unleash an army of tens of thousands of IRS agents exclusively on working- and middle-class taxpayers.
That’s par for the course. But now, a billionaire GOP donor has reportedly been caught on a recording advising Republicans to amplify distortions exactly like this.
Politico obtained audio of a conference call that Republican National Committee chairwoman Ronna McDaniel held with top GOP donors, telling them their help is badly needed to win the Senate.
McDaniel advised the donors that Democrats are swamping Republicans in money, because GOP fundraising is flat with small donors. Hence big donors must step up and bail out GOP candidates by giving directly to their campaigns, McDaniel told them.
But buried in the Politico story is another revelation.
Specifically, Politico reports, during the question-and-answer session, billionaire GOP donor Steve Wynn asked whether there are additional ways for very well-heeled donors to give anonymously. Wynn also urged Republicans to crank up the messaging that Democratic tax policies will primarily hammer working-class people, per Politico:
It’s particularly perverse for a billionaire donor such as Wynn to advise Republicans to “message” in this way because the new legislation’s provisions are actually designed to target the very wealthiest Americans who benefit from business structures that require lots of IRS resources to audit. That is, people like Wynn.
To be fair, it’s not entirely clear which tax policies Wynn was referring to here. But Steve Rosenthal, a senior fellow with the nonpartisan Tax Policy Center, notes that Wynn’s claim is often made by opponents of beefing up IRS tax funding. They say such funding will inevitably mean increased targeting of low-level cash workers and cash businesses, because they are often tax avoiders.
It’s true that cash workers and small-to-midsize cash businesses are sometimes part of the tax avoidance problem. But the new policy — which would spend $80 billion on IRS enforcement, with the goal of raising at least $200 billion in additional tax revenue over 10 years — is specifically meant to address a problem that has been a huge boon to very rich taxpayers.
The infusion of money is necessary because the IRS has been the target of an extraordinarily successful campaign to defund it. Who benefits most from an underfunded IRS? The wealthy.
As ProPublica usefully documented, when the IRS finds itself without sufficient resources and personnel, it’s outmatched by the ultrawealthy, who can hire squadrons of accountants and lawyers to help them avoid paying taxes.
Notably, while audit rates have fallen across the board in recent years, they’ve plunged the most for the wealthy. As the Government Accountability Office documented, in 2010, 21.2 percent of tax returns reporting over $10 million in income were audited; by 2019, that fell to 3.9 percent. Among those making between $5 million and $10 million, audits fell from 13.5 percent to just 1.4 percent.
“The lack of resources prevents the IRS from ensuring that large and sprawling operations pay their full tax bill,” Rosenthal told us. “The point of increased enforcement is to pursue these businesses.”
There’s no telling whether Wynn himself will be affected by the Inflation Reduction Act’s changes. But Wynn, who presided over casinos and properties on multiple continents, oversaw the same sort of complex business structures that potentially benefited from years of starved IRS enforcement, Rosenthal says.
“Wynn is trying to push Republicans to scare the little fish into thinking the IRS is targeting them,” Rosenthal told us, “when in fact the IRS has pledged to target the big fish.”
In short, the new policies will target members of Wynn’s class. It’s pretty revealing for Wynn to be urging Republicans to attack those policies by arguing that their real victims will be waiters and bartenders. Democrats should jump on this.
Opinion•
Opinion•
Opinion•

source

Heptones for charity event – Jamaica Observer

Earl Morgan has lasting memories of Brentford Road. That’s where he recorded a series of hit songs with The Heptones at Studio One for producer Clement “Coxson” Dodd.
Morgan returns to the Kingston strip (now known as Studio One Boulevard) tomorrow with The Heptones for a fund-raising event at Studio One Boulevard Entertainment Centre. Robert Dacres and Carlton Scarlett are his colleagues in the group.
“Is a great feeling to go anywhere near Studio One ’cause dat’s where The Heptones do some of dem greatest hits an’ where wi do Heptones on Top, one of di greatest reggae albums. Wi beat di test of times to dis day,” he said.
The classic Heptones line-up also included lead singer Leroy Sibbles and Barry Llewyllyn. At Studio One they dominated the rocksteady era of the late 1960s with songs such as Sea of Love, Party Time, Why Did You Leave, Sweet Talking and Heptones Gonna Fight.
Sibbles left the group in the late 1970s and was replaced by Naggo Morris. Llewyllyn died in 2011, while Morris died in 2020.
Morgan told the Jamaica Observer that the current line-up has kept busy. They have performed in Mexico and Germany, and have dates confirmed for the United Kingdom in September.
In 2021 Trench Town Records released The Heptones EP. In June, their 1983 album Heptones in a Dancehall Style was reissued by British company Burning Records.
Turbulence, King Benj-I, Wayne J, and Johnny Lion are also expected to perform at tomorrow’s event.
— Howard Campbell
Now you can read the Jamaica Observer ePaper anytime, anywhere. The Jamaica Observer ePaper is available to you at home or at work, and is the same edition as the printed copy available at
HOUSE RULES

source

Halifax Health Nurse Accused of Rape at Hospital – News Daytona Beach

DAYTONA BEACH, Fla. – A registered nurse anesthetist that worked at Halifax Hospital in Daytona has been arrested and charged after allegedly locking up and raping a girl inside the building. 57 year-old Joel Gingery was charged with both sexual battery and false imprisonment for the incident.
Things started when Gingery reportedly invited the victim, an 18 year-old girl, to the hospital to hang out with him. The two knew each other from a jiu jitsu class that Gingery taught.
The victim’s description of the incident recalled Gingery taking her into a fourth floor room, blocking the door, and sexually assaulting her. Police say he remained in contact, trying to apologize convince her to see him again. He reportedly promised he wouldn’t repeat his heinous assault.
Trident BJJ, the jiu jitsu studio that Gingery taught at, has released a statement following the publicization of the allegations:

Halifax Health Daytona has not yet released a statement responding Gingery’s charges, as of Friday morning. One profile on him from the Brazilian jiu jitsu community reports that he was at one point a Navy SEAL.
Other items that may interest you
More local news


1410 Lpga Blvd Suite 148,
Daytona Beach, FL 32117
(386) 255-9300

source

Ro Khanna's Apology Tour. And Why Trump Voters Love It. – POLITICO

The Friday Read
The congressman from Silicon Valley is pressure-testing a message that he thinks could save the Democratic party in the industrial Midwest.
Rep. Ro Khanna (D-Calif.), second from right, tours New Castle Stainless Plate in New Castle, Ind., on Aug. 3, 2022. | Photographs by Luke Sharrett for POLITICO
By Michael Kruse

Link Copied
Michael Kruse is a senior staff writer at POLITICO and POLITICO Magazine.
NEW CASTLE, Ind. — Dressed in gray suit slacks, black work boots and a blue hard hat, the congressman from Silicon Valley one recent morning in a steel factory here stood and looked at a big, roaring furnace so hot it was glowing orange.
For Ro Khanna, the progressive Democrat and third-term House member who represents the district singularly synonymous in the country with big money and high tech, this was the first stop of a four-day, three-state tour through the more downcast Midwest, meeting with local officials, factory workers and union retirees in perennially depressed one-time auto-industry strongholds.
Khanna, who turns 46 next month, is still young, but he’s been at this a long time. He worked as a volunteer on Barack Obama’s first state senate campaign before eventually working in his presidential administration. He modeled Howard Dean’s 2004 presidential run in his own precocious, even pushy initial try for Congress going on 20 years back. He was a national co-chair of Bernie Sanders’ 2020 bid, and his new book got kudos on Twitter from Bill and Hillary Clinton. And in the conference room here at New Castle Stainless Plate, the audience made up of the company’s CEO plus a clutch of his right-hand men, Khanna had road-tested pieces of a message he’s been honing for years. “Make more stuff here,” he said. “Build our productive capacity,” he said. “Buy American,” he said.
Khanna is at heart an academic and a policy wonk. But he’s keen, too, on the language of politics and persuasion; it matters what you say, he believes.
These, of course, are not new ideas. But the combination of the messenger and the locale was unusual. In August, when most members of Congress are in their respective districts or perhaps off elsewhere to raise funds, Khanna was here — not only not at home but in a red part of a red state, not asking for their money, and not asking for their votes (at least not yet). Instead, he was here in Indiana, then Wisconsin, then Iowa, sharpening a key plank of his overall political pitch, attempting to rehab his party’s reputation in an area of the country that’s become increasingly inhospitable, and also very obviously laying seed for his own evident presidential ambitions. And maybe the most surprising part of this surprising scene? It appeared to be working.
Because now out on the factory floor, the supply chain manager sidled up to me to express some mixture of confusion and pleasant surprise.
Fred Centner thought former president Donald Trump had had “a lot of good ideas.” The former president also, unfortunately, was “an idiot,” Centner said. He wishes he would just go away. Before this visit from Khanna, he had looked him up, pegging him as a “typical liberal.” The way Khanna was talking, though, sounded to Centner a lot like … Trump.
Make more stuff here? “That’s what Trump wanted,” he said over the noise of the heavy machinery. Buy American? “It’s a Trump concept. It’s a Republican concept,” he said. “So, to hear a Democrat coming out and saying, ‘Hey, we want the same things’ … it’s good to hear.”
Khanna, 45, is still young, but he’s been at politics a long time. He worked as a volunteer on Barack Obama’s first state senate campaign before working in his presidential administration.
As Democrats look ahead to 2024 and beyond, it’s an article of faith that they’ll only keep the White House if they field a candidate — like Joe Biden, even Bernie Sanders — who can speak to enough Rust Belt voters to keep them in the Democratic fold. But Khanna, polished, coastal and almost omnipresent on cable TV, including regular hits on Fox, is still an unknown quantity to people like the Republican mayor of nearby Rushville. Mike Pavey came to see Khanna mainly because he wanted to know what he was doing here.
Khanna was sitting in a meeting room in a Hampton Inn most specifically because of Robin Johnson. A part-time political science professor, the host of a radio show called “Heartland Politics” and an informal adviser to outgoing Democratic congresswoman Cheri Bustos of Illinois, Johnson earlier this year had read something Khanna wrote for the Wall Street Journal. It piqued his interest, so Bustos connected him with Khanna, which led to Khanna coming to talk at the college where Johnson teaches and eventually this convening of a handful of mayors from the area and from both parties. The subject line of Johnson’s emailed invites: “Bringing tech jobs to the Heartland.”
Pavey, the mayor from Rushville, admitted during introductions he and the two city and county officials who joined him had made the hour-or-so drive somewhat skeptically. “I said, ‘What’s he up to?’” granted the local economic development director. Another Republican mayor Johnson had approached but who had not come, Pavey said, had been blunt: “Why would a representative out of California come to Indiana to take jobs away from his area and promote them here?”
POLITICO Weekend delivers gripping reads, smart analysis and a bit of high-minded fun. Sign up for our newsletter.
Khanna had anticipated that wariness. “Look, you people in this room will disagree on where I stand on abortion, on gay marriage. But why can’t we find the place where we do agree?” he said.
“I just think we’ve got to wake up as a country across the political divide and come together on how we build the next generation of manufacturing in America. And we’ve got to get these jobs not just in Silicon Valley, or New York, or Austin, but around the country,” he said.
“We have forgotten what won World War II. It was a victory of production. I mean, it was obviously the men who sacrificed their lives in Normandy, and our amazing military, but the way we really won is we outproduced Japan and Germany by orders of magnitude.”
Khanna eats lunch with New Castle Mayor Greg York at a Wendy's on Aug. 3.
Khanna, according to former and current advisers and aides, is at heart something of an academic and a policy wonk. But he’s keen, too, on the language of politics and persuasion even to the point of bumper-sticker slogans. It matters what you say, he believes, but realistically, it might matter even more how you say it.
“He’s just very good from a messaging perspective,” Steve Spinner, a friend and mentor and Khanna’s campaign chair for the past decade, told me. “That’s an area that Democrats historically struggle with, from the White House on down, and it’s something that Ro is actually quite good at.”
“He is one of the few people,” said Jane Kleeb, a board member of Our Revolution, the progressive political action organization launched by Sanders in 2016, “that get how to talk about rural economic development without sounding like they’re reading off a talking-point sheet.”
“And it’s so ironic,” said Johnson, “that it’s coming from somebody who represents Silicon Valley.”
He’s good at it because he works at it. Which is why being with Khanna at times can feel like a real-time catch-phrase workshop.
“Economic patriotism,” Khanna said not once but three times in the two-hour roundtable with the mayors at the Hampton Inn.
“Economic patriotism,” said Brian Sheehan, Rushville’s community development director, repeating it back to Khanna. He told Khanna to trademark the term. “Awesome,” he said. “I think that’s the kind of thing that connects to everyone.”
“I was impressed by the fact that it seemed like his goal was to help our region and do it in a bipartisan way,” Pavey told me. “I’m encouraged.”
“I hope that you’re running for a higher office,” Greg York, the mayor of New Castle, told Khanna. York is a Democrat, but in 2016, he told me, he voted for Trump. He voted for Joe Biden in 2020. In 2024, though, he wants to vote for somebody else. “I hope that’s why you’re visiting us,” York said.
Khanna’s father (top left) was a chemical engineer, and his mom was a substitute teacher addressing the functional needs of children with disabilities. | Courtesy of Ro Khanna
Now we were in Anderson, Ind., in a back booth of a Texas Roadhouse just off Interstate 69, tinny, too-loud country music blaring from a speaker on the ceiling. Khanna ordered a half slab of ribs with green beans and corn. I suggested this “economic patriotism” message sounds different coming from him rather than, say, white, more immediately identifiably “Rust Belt” candidates like Tim Ryan in Ohio or John Fetterman in Pennsylvania.
Khanna concurred. “I think people underestimate biography and identity in people’s perception.”
The Hindu grandson of a freedom fighter in the Mahatma Gandhi-led independence movement and the son of Indian immigrants, his father a chemical engineer and his mom a substitute teacher addressing the functional needs of children with disabilities, Khanna was born in 1976 in Philadelphia — in America’s bicentennial year, in the home of Independence Hall and the Liberty Bell, a historical coincidence I’m emphasizing only because he so frequently does. He grew up in Pennsylvania’s Bucks County, long a microcosmic, middle-of-the-road chunk of political territory, watching Rocky movies, rooting for the Eagles of the NFL and playing Little League and Strat-O-Matic baseball. “That was my upbringing,” Khanna told me as we ate dinner. “Americana.” His ninth grade English teacher told him he was “going to be the first Indian American president.”
The valedictorian of his class at Council Rock High, Khanna started college at Duke, graduated from the University of Chicago with the highest honors in economics and then went to Yale Law. As an undergrad in Chicago, with close friend and eventual law-school roommate Renato Mariotti, Khanna organized in April 1998 a conference called “The Challenge of Modern Democracy” — a three-day affair that drew to campus notables such as the former prime minister of Canada, the former president of Haiti, the presidents of Morehouse College and MIT, and a preeminent federal appellate judge. “He is definitely,” said Mariotti, a former federal prosecutor who now is the legal affairs columnist for POLITICO Magazine, “one of the most ambitious people that I’ve ever known.”
“I will be one of the most impactful players in Washington from day one,” he told the publication India Abroad three years before he won Silicon Valley’s seat in Congress, “because of the constituency I represent, which I honestly believe is the greatest, most influential constituency in the country, in the world.” | Ben Margot/AP Photo
He ran for Congress in 2004, then again in 2014, then again in 2016, challenging beloved, long-standing incumbents. In between, in addition to teaching at San Francisco State, Santa Clara and Stanford universities, the intellectual property attorney was a deputy assistant secretary in Obama’s Commerce Department, and then wrote a book about it. “As I traveled the country, I learned that manufacturers remain at the cornerstone of our economy and our national security, and are indispensable to American greatness,” he wrote in Entrepreneurial Nation: Why Manufacturing is Still Key to America’s Future. “Democrats and Republicans must find common ground to keep America a manufacturing leader,” he added. He got the book blurbed by boldface names ranging from the late labor leader Richard Trumka to SpaceX and Tesla tycoon Elon Musk. “I’ve spent a lifetime thinking about policy issues,” Khanna told SF Weekly when he was 27 years old. “I will be one of the most impactful players in Washington from day one,” he told the publication India Abroad three years before he won Silicon Valley’s seat in Congress, “because of the constituency I represent, which I honestly believe is the greatest, most influential constituency in the country, in the world.”
It was getting late at the Texas Roadhouse.
“I think when people look at me, they’re like, ‘All right, he’s an Indian American guy from Silicon Valley, he understands wealth generation, and the future, and the global economy’ — and then this is a guy who’s saying, ‘We can produce this stuff in America, and we can produce the future in America,’” he told me. “It’s taken me a lot of thinking to get to the point about how Bucks County and Pennsylvania relate to California and how both are important,” he said. “It’s the combination” — melding Silicon Valley and Bucks County out here in the vast, vexed left-behind in-between — “that makes it, I think, intriguing. And the first thing is you’ve got to capture people’s imagination before they’ll listen to you.”
At a sparse Chrysler auto lot, Khanna repeats his new favorite phrase. “Economic patriotism,” he said. “An Indian American from Silicon Valley says, ‘We’ve got to make things in America,’ people don’t think it’s xenophobic.”
The union hall the next morning felt like a cross between a museum and a senior center.
On the walls of the old UAW building in Anderson was a portrait of President John F. Kennedy, framed, black-and-white, yellowing newspaper clippings from the ’60s and ’70s, and a bulletin board with tips on how to handle Alzheimer’s and spot scams that target the elderly.
Khanna sat surrounded by a dozen or so General Motors retirees Johnson again had helped convene. He all but apologized.
“We made a huge strategic mistake as a country. We just let our production go offshore. It was a mistake by, frankly, everyone in power over the last 40 years,” Khanna said. “And I’ve been trying to work at figuring out how we get new manufacturing into every part of this country.”
The CHIPS act, which allots some $50 billion to stateside semiconductor production and research, was a start, said Khanna, who helped shepherd the recently Biden-signed legislation along with Senate Majority Leader Chuck Schumer as well as a pair of Republicans — Rep. Mike Gallagher of Wisconsin and Sen. Todd Young of right here in Indiana.
A filing cabinet is pictured on the factory floor of New Castle Stainless Plate during Khanna's tour of the facility.
But Khanna argued for much more support from the federal government. “With interest-free loans, with financing, with capital … I think we’ve got to have the government back in the process of building things in America,” he said. “I think with the pandemic people say, ‘We aren’t making our masks in this country? We’re not making our PPE in this country? We’re not making antibiotics in this country? We’re not making the chips that are in our cars in this country? We aren’t making baby formula enough in this country?’ People say, ‘What the hell’s going on?’” he said.
“You guys,” Khanna said, “knew this a long time ago.”
It’s not just all the factory jobs that went away, said the group gathered at the union hall. It’s all the other kinds of jobs, which existed in the area because of all the factory jobs — so many of which kept going away, in the ’70s, in the ’80s, in the ’90s, into the new century, until there were nearly none. It’s the depression, it’s the divorces, it’s the drugs, they said, because of all that loss over all that time.
“I’m 80 years old,” one of them said. “I’ve seen this stuff go on and on and on and on.”
“Indiana’s a great place. It’s home,” said another. “But it’s not what it was.”
It was drizzling when we walked outside. Johnson drove Khanna out of Anderson, past empty storefronts, past parking lots with weeds, past a church called Promise Land.
It’s not just all the factory jobs that went away, said a group of General Motors retirees who gathered to speak with Khanna. It’s all the other kinds of jobs, which existed in the area because of all the factory jobs.
Back in New Castle, inside the Henry County Democratic headquarters with brown wood walls, simple white tables and an Obama-Biden ’08 sign in the corner, Khanna took the mic. This wasn’t even on the itinerary at the beginning of the day, but the mayor had made some calls, and now about 20 locals were here to listen to the congressman from Silicon Valley.
I texted a picture to Mark Longabaugh, a senior adviser to Sanders during his 2016 presidential campaign who sees a potential successor in Khanna.
“As a political professional who would be advising somebody like Ro, my advice would be: Be ready. Launching a presidential campaign, you don’t do it with a snap of the fingers,” Longabaugh told me. Khanna says he’s not planning on running for president in 2024. “The other thing that I’ve said to him,” Longabaugh said, “is really 2028 is not that far away.”
“I don’t think he is just interested in having positions for positions’ sake,” said Mariotti, his college classmate and law-school roommate. “But I think it’s fair to say that a congressman from California traveling around the country and building a nationwide network is something that you only do if you have presidential ambitions.”
“I personally,” said Spinner, “look at him as the future of the party.”
“We made a huge strategic mistake as a country. We just let our production go offshore. It was a mistake by, frankly, everyone in power over the last 40 years,” Khanna said.
Now, here at the headquarters of the county party, Khanna said much of what he had said at the steel factory, and at a factory that makes gym equipment and window shades and projection screens, and at a factory that makes seats for cars, and at a sparse Chrysler auto lot, and at the Hampton Inn with the mayors, and at the union hall with the retirees, floating again to this group this new favorite phrase.
“Economic patriotism,” he said.
“An Indian American from Silicon Valley says, ‘We’ve got to make things in America,’ people don’t think it’s xenophobic,” he said. “Make stuff in America. Invent it here, produce it here, buy it here …”
Khanna’s new book, Dignity in a Digital Age: Making Tech Work for All of Us, is too early and a little too nerdy to be seen as the kind of familiar, almost obligatory offering from somebody running for something, but this impromptu evening event fairly quickly did turn into what felt to me like a rough-cut town hall of a proto-presidential campaign. He painted an explicit contrast with Trump. “He sold false hope,” he said. “We actually have a real vision.” And here in the late summer of a midterm year, Khanna worked his way toward the sort of closing I’ve come to expect at a different point in the political calendar before walking out into the cold in some dot on the map in Iowa or New Hampshire.
Top figures from Bernie Sanders’ presidential campaign are encouraging Khanna to run for president in 2024 if Joe Biden doesn’t seek a second term.
“People love this country. They want America to win. They want us to lead because we’re a great nation. And they know we’re a great nation because of stories like mine,” Khanna said. He acknowledged sometimes it was hard growing up with immigrant parents and brown skin and the name Rohit. “But that’s not what I remember about growing up in Bucks County, Pa.,” he said. “I remember Little League coaches who believed in me. I remember the local paper, the Bucks County Courier Times, that published my letters to the editor in a community that was 95 percent white. I grew up believing I could do anything in this country. That’s the story of America. That’s the essence of America, whether in Bucks County, Pa., or New Castle, Ind.”
After the people clapped, I went to the rear of the room to talk to a woman wearing a Sanders shirt. “I don’t know why he’s here,” Jessika Feltz, the vice chair of the county party, said of Khanna, “but I like that he’s here.”
I wondered if she would vote for Khanna for president.
“Hundred percent,” she said.
“Over Biden?” I asked.
“Hundred percent.”
Khanna came over to thank her for coming. “Run for president,” she said. He laughed. She laughed. But it didn’t sound like they were joking.
A few days later, following stops in Janesville, Wis., and Dubuque, Iowa, I got a text from Khanna. “I have refined my pitch to a new economic patriotism,” he said. “The word new is key as it gives a sense of future and technology.” Coming from him, coming from Silicon Valley, he added, “it’s something fresh, with a fresh pair of eyes and thinking that is resonating.”
Gripping reads, smart analysis and a bit of high-minded fun. Because even power needs a day off.
By ELLIOT ACKERMAN
By ALI VITALI
By DEREK ROBERTSON
By NANNA MUUS STEFFENSEN AND ELLA CREAMER
By NORA NEUS
POLITICO Weekend flies into inboxes every Friday. Don’t miss it!

Link Copied
© 2022 POLITICO LLC

source

The Best Grooveboxes for Beat Creation and Live Performance – Gearnews

The Best Grooveboxes for Beat Creation and Live Performance  ·  Source: Thomas Evans / Unsplash
Sometimes, taking a break from your DAW can be the creative breath of fresh air you need. We’ve selected some of the best grooveboxes for beat creation and live performance to keep the ideas flowing.
Before it was first used by Roland in 1996 to market the MC-303, the term “Groovebox” simply referred to a standalone drum machine, sampler, synthesizer – or a combination of the three – with its own sequencer onboard. This instrument design concept initially emerged through instruments like the EMS Synthi in the early 1970s.
However, it wasn’t until mainstream music became more loop orientated, that more grooveboxes began to populate the market. Notable instruments like the Roland MC-202, the Linn 9000, the SC Studio 440, the E-mu SP-1200, and the AKAI MPC had a profound effect on modern music.
Their intuitive interface design placed music production tools at the fingertips of many artists that no longer had to rely on expensive studios for that first creative spark. Grooveboxes have certainly evolved over the years, becoming both more affordable and versatile with audio interfaces and extensive connectivity options.
The Novation Circuit Tracks is a battery-powered standalone groove station with far more power than you’d expect in its price range. At the core, it’s an eight-track sequencer with an eight-track internal mixer equipped with two inputs.
You have four drum channels, two synth channels, and two additional MIDI channels for sequencing external instruments. It may look simple, but the Circuit Tracks has parameter automation, trigger probability, and pattern mutate. Which are features you’ll find in units almost twice the price.
It may not have an audio interface or DAW integration, but it’s compatible with the Novation Components cloud platform, which adds some useful management features.
Novation Circuit Tracks
Novation Circuit Tracks
If you’re looking for something a little off the beaten track, the Polyend Tracker could be what you’re after. The verticle spreadsheet-style beat programming isn’t for everyone, but it can produce a different scope of results compared to traditional step sequencers.
The Polyend Tracker is an eight-track monophonic sampler with a large screen and an interface that gives you an overview of your sample selection, note values, and other per-step parameters like most trackers.
Overall, it’s a new-school piece of gear with an old-school sensibility. The audio output is a little clunky sounding, but you can easily export stems via microSD. It also has incredible MIDI sequencing capabilities for controlling other instruments, so at least it plays well with others.
Polyend Tracker
Polyend Tracker
The Digitakt remains one of the finest groove-based instruments ever designed, with a multitude of ways to approach music creation. So, if you use a sample-based production workflow, this is certainly a great option.
As a standalone one-shot sampler, it has one of the best-sounding engines on the market, and the versatile sequencer makes it easy to create unique patterns.
The Digitakt is also an audio interface and is compatible with Elektron’s powerful Overbridge software. This makes it easy to get sounds in or out at the start or end of your session.
Elektron Digitakt
Elektron Digitakt
With a legacy reaching back to the mid-80s, the MPC One brings together features from the X and Live versions in a more compact and affordable package. If your goal is to create music outside of a DAW, the MPC One does this almost too well.
So well in fact, that it ends up feeling rather DAW-like in its approach. There’s no denying the power of the MPC One as a standalone music creation station, but features like paid plug-ins are bound to raise a few eyebrows.
The result is that the modern MPC range will always polarize opinions. Either you completely love it, or you use something else.
AKAI Professional MPC One
AKAI Professional MPC One
The MC-707 Groovebox is Roland’s modern flagship in the longstanding MC series. Rather than attempting to cram every DAW feature available into a single standalone unit, you get an intuitive enough workflow to easily turn pattern jamming into songs.
Besides the sequencing and arrangement tools, the main drawcard is the Roland sound. With the ZEN CORE sound engine, you have access to a ton of Roland synths and drum machines to bring into your tracks.
The screen interface is a little small and clunky, but this comes with the territory for a lot of Roland gear. So don’t forget your menu diving goggles for this one.
Roland MC-707
Roland MC-707
Videos:
By loading the video, you agree to YouTube’s privacy policy.
Learn more
Load video

By loading the video, you agree to YouTube’s privacy policy.
Learn more
Load video

By loading the video, you agree to YouTube’s privacy policy.
Learn more
Load video

By loading the video, you agree to YouTube’s privacy policy.
Learn more
Load video

Note: This article contains affiliate links that help us fund our site. Don’t worry: the price for you always stays the same! If you buy something through these links, we will receive a small commission. Thank you for your support!
How do you like this post?
Your email address will not be published.





· It’s not freeloading to accept compensation for a government-mandated closure which is forced upon businesses on pain of arrest and criminal sanction you fool. Is there anyone with an IQ over 50 …
· Speaking of making stuff up … Ah, the old “every organisation I don’t agree with is a known hate group” line. That makes you a known imbecile. Go and peddle your culture war crap somewhere…
· Oh no. Anyway.

source

HBO Documentary Films Acquires ‘Master of Light,’ Acclaimed Doc On Gifted Artist Who Painted Behind Bars – Deadline

By Matthew Carey
Documentary Editor, Awards
HBO Documentary Films has acquired worldwide television and streaming rights to Master of Light, the SXSW award-winning film about artist George Anthony Morton, who honed his exceptional talent while serving a prison sentence.
Dutch filmmaker Rosa Ruth Boesten directed the documentary, which is produced by Oscar winner Roger Ross Williams, Ilja Roomans, and Anousha Nzume.
“I learned about George through a mutual friend who met George in New York and told me about his story,” Boesten told Deadline at SXSW, where her film premiered, winning the Grand Jury Prize for documentary. “He just had a New York Times article that came out and I read about the story and was just blown away by his artwork. And that’s when I reached out, and that’s where it started for me.”

MTV Documentary Films Sets Release Date For ‘Art & Krimes By Krimes,’ Doc About Artist Who Made “Secret Masterpiece” Behind Bars

Morton “is a classical painter who spent ten years in federal prison for dealing drugs. While incarcerated, he nurtured his craft and unique artistic ability,” HBO Documentary Films noted. “Since his release, he is doing everything he can to defy society’s unlevel playing field and tackle the white-dominant art world. Now, he is on a journey back to his hometown of Kansas City, where he tries to heal the broken relationship with his mother and paint family members in the style of the Dutch Old Masters.”
The release from HBO Documentary Films adds, “Going back home forces George to face his past in his quest to rewrite the script of his life and discover the contribution of African influences to the realist tradition.”
In a statement, Boesten commented, “As a first-time director, I am overwhelmed with excitement to work with such an acclaimed company as HBO Documentary Films. We hope George’s story of perseverance and talent as a classical painter will resonate with all audiences.”
In addition to the Grand Jury Prize at SXSW, Master of Light won Best Documentary Feature at the San Francisco International Film Festival and Best First Feature at Sheffield DocFest in the U.K.
“From the moment I saw a teaser of the film,” Williams said in a statement, “I knew Rosa’s talent and George’s story had to be showcased to a wide audience. To see it come to fruition with HBO is a very proud moment for the whole team.”
 

Master of Light is a One Story Up and Docmakers & Vulcan Productions production. Rosa Ruth Boesten directs; the film is produced by Roger Ross Williams, Ilja Roomans, and Anousha Nzume, and executive produced by Jody Allen, Ruth Johnston, Rocky Collins, Jannat Gargi, and Geoff Martz.
HBO Documentary Films did not reveal an intended release date for the film.
“It’s been quite overwhelming,” Morton told Deadline of seeing his story transformed into a documentary. “Because the film is so immersive in my own healing journey and my own practice… It was a beautiful struggle, I would say, very beautiful struggle, but I’m honored for the opportunity. It’s really humbling. Being able to find light within darkness is probably the best kind of light.”
Subscribe to Deadline Breaking News Alerts and keep your inbox happy.
Signup for Breaking News Alerts & Newsletters
Get our latest storiesin the feed of your favorite networks
We want to hear from you! Send us a tip using our annonymous form.
Sign up for our breaking news alerts
Deadline is a part of Penske Media Corporation. © 2022 Deadline Hollywood, LLC. All Rights Reserved.

source

A new perspective on Workload Control by measuring operating performances through an economic valorization | Scientific Reports – Nature.com

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 14599 (2022)
Metrics details
Workload Control (WLC) is a production planning and control system conceived to reduce queuing times of job-shop systems, and to offer a solution to the lead time syndrome; a critical issue that often bewilders make-to-order manufacturers. Nowadays, advantages of WLC are unanimously acknowledged, but real successful stories are still limited. This paper starts from the lack of a consistent way to assess performance of WLC, an important burden for its acceptance in the industry. As researchers often put more focus on the performance measures that better confirm their hypotheses, many measures, related to different WLC features, have emerged over years. However, this excess of measures may even mislead practitioners, in the evaluation of alternative production planning and control systems. To close this gap, we propose quantifying the main benefit of WLC in economic terms, as this is the easiest, and probably only way, to compare different and even conflicting performance measures. Costs and incomes are identified and used to develop an overall economic measure that can be used to evaluate, or even to fine tune, the operating features of WLC. The quality of our approach is finally demonstrated via simulation, considering the 6-machines job-shop scenario typically adopted as benchmark in technical literature.
Nowadays, more than 40 years after its original conception, Workload Control (WLC) has been deeply investigated1 and its manyfold benefits are unanimously acknowledged by the scientific community2. Nonetheless, although they have increased over the last decade, successful industrial implementations of WLC are still limited3,4,5. A possible explanation of such a limited industrial consideration could be the complexity and the heavy informational requirements of WLC, which are both higher than those of other ‘paper and pencil’ lean-techniques, such as dual Kanban or Constant Work In Progress-ConWIP6. Another hurdle to WLC acceptance can be found in7,8, where the large gap between theoretical contributions and industrial applications is clearly discussed and exemplified. Both authors noted that most of the studies are carried on using over-simplified event-based simulation models, which do not account for real-life constraints. Perfectly balanced systems with a rather low utilization level (typically set at 90%) are generally considered, while additional operative issues such as handling times, limited buffer areas and parts-feeding requirements are neglected9. Although the spectrum of the business cases is much wider than that10, only a few researchers focused on unbalanced manufacturing systems (see for example11) and tried to investigate the applicability of WLC to these system too8,12.
A last and more subtle problem has been identified by6, who noted that in scientific literature WLC performance is generally measured using time-related measures, such as the percentage of tardy jobs or the like. There is no doubt that the capability to set and respect short delivery dates in response to customers’ enquiries is a primary market requirement for Make-To-Order (MTO) manufacturers13,14. Yet, focusing exclusively on this measure is somehow myopic because, if WLC is regulated by simple operating rules, the percentage of on time deliveries does not deviate much from that of a purely push operating system, with optimized dispatching rules15,16. This is a strong disincentive, as manufacturers do not see the point of adopting a complex production planning and control (PPC) system, if similar results could be achieved with a much simpler MRP based system, provided of adequate capacity control and scheduling mechanisms17,18. To get rid of this misconception, the research community should extend the analysis beyond ‘time related’ performance measures, and should try to quantify other WLC related benefits, such as WIP reduction and containment. WIP, in fact, is the worst cause of waste of a lean-oriented manufacturing systems and its reduction, beside containing the shop floor throughput time, would also cut holding costs, free up space, improve order and tidiness, and favor visual management and control19. As noted by4, performance measures related to these elements of competitive edge exist, but they are seldom used to assess performance of WLC systems. Also, these are unstructured approaches that focus on a single and specific feature of a WLC systems, so that the overall view, and the overall benefits are lost anyway.
For this reason, an interesting branch of research has developed over the last decade, with the aim of evaluating WLC performances by means of economic values, that is costs and/or revenues20,21,22. Although this research topic is also reflected in the wider literature on weighted earliness and tardiness (see for example23), we believe that an economic evaluation in monetary terms is the main way to merge and combine different benefits and costs. To this aim, all the relevant costs (of variable nature) and incomes of a specific WLC configuration might be quantified, confronted, and discussed, to assess and compare the expected economic benefits of the WLC implementation.
However, the mentioned studies on economic assessment of WLC performances present some important limitations from our point of view. First, the cost system they propose are specific of the simulated case22,24,25, and often industry-specific and related to semiconductor manufacturing20,26,27,28. Second, although the cost factors, or clearing functions, have been reported in previous research, we note that these methods were seldom adopted to the so-called research field of rule-based WLC (see29,30 for an overview on rule-based and optimization based WLC).
Indeed, we believe that such a system, as well as the cost function, should be better generalized and detailed, especially in the rule-based WLC field. We also note that previous research mostly focus on costs, whereas we believe that incomes should also be considered to provide a better performance indicator. Finally, in the authors’ opinion, previous research works do not clearly report how an economic indicator could be used to identify and fine-tune a specific WLC configuration, and it could also provide to companies, and especially SMEs, a method to assess economic benefits to be expected from a WLC implementation.
To overcome these limitations, the present paper incorporates a general method for economic evaluation in WLC research, by proposing a Revenue per job function that could be used to select and fine-tune the best performing WLC configuration in given circumstances. This function is also applied to a simulated 6-machines job-shop scenario, which is typically used as a benchmark in technical literature, and supported by a sensitivity analysis, so as to show the benefits of our approach in a common scenario, and to assess how these benefits might change under different ratios of cost parameters. By doing this, we suggest a possible solution to the problem identified by6, i.e. we provide a general method, as well as a sample implementation and a sensitivity analysis to identify a trade-off between different performances and metrics.
The remainder of the paper is organized as follows. In “An overview on WLC research” and “Performance assessment of a WLC system” sections we provide a brief overview of WLC research, also including studies on performance assessment of WLC systems. Moving from these premises, the economic assessment model is developed in “A proposal for an economic evaluation of WLC systems”, where all the cost and revenues voices are discussed in detail. The approach is finally tested via discrete event simulation in “Performance assessment of a WLC system” and Performance assessment in monetary terms” sections that describe, respectively, the simulated environment and the obtained outcomes. Comments, managerial insights, and conclusions are finally provided in “Conclusions, managerial implications, and future works”.
A major guiding principle of WLC is input/output control31, asserting that the input and the output rate of a shop should equal. Scientific literature, however, presents several WLC methods, whose unifying theme is use of a pre-shop pool and order release mechanism1. In this paper, we refer to the so-called LUMS WLC (see for more details32), a rule-based approach to WLC consisting of three (or four) control levels, namely the (i) customer enquiry and order entry, which are sometimes separated in two different stages; (ii) order release and (iii) priority dispatching. At each level, two methods of control are available: input and output control33. The former regulates the input flow of orders to the next stage, and the latter controls workload by regulating the outward flow, e.g. by setting due dates and adjusting capacity. In this regard, we note that WLC is partially aligned with the stream of research on Value-Chain Flexibility34,35,36. According to this framework, in fact, to answer to the environmental uncertainty that is typical of job shops oriented manufacturers, and which has significantly increased in the post-pandemic era, organizations should exploit four different types of flexibility, namely: (i) product development; (ii) manufacturing; (iii) logistics and (iv) spanning flexibility37.
The alignment between these two concepts lies in the fact that WLC could significantly impact on manufacturing flexibility, and especially on machine and routing flexibility (see37), and it could also provide some positive outcomes on other types of flexibility.
To improve flexibility and stabilize lead times in a context of environmental uncertainty, WLC uses workload caps or norms, generally expressed as number of expected working hours, to regulate the release of new production orders. More precisely, work in process is constantly monitored and new jobs are not released in the shop floor, unless all norms are fully met. If one or more norms are violated, jobs are stopped into a Pre-Shop-Pool (PSP) of pending orders, waiting to be reconsidered for possible future release. Due to this pattern, the time a job spends in the PSP, namely the ({text{PSP}}_{{{text{time}}}}), may not be negligible relatively to its Shop Floor Throughput Time (({text{SFTT}})), i.e., total time from order release to dispatching. Hence, in a WLC system, these two quantities are always considered together as they determine the Gross Throughput Time of a job ({text{GTT}} = left( {{text{PSP}}_{{{text{time}}}} + {text{SFTT}}} right)).
When a customer places an order (or makes an order enquiry), the manufacturer must decide whether to accept the order or not. Only profitable and technically feasible jobs should enter the PSP. Since this evaluation step is standard and typical of many manufacturing system, it is rarely considered by the WLC research community. A more interesting decision, which has sparked much more research interest, concerns the customer enquiry stage and the assignment of a due date to the accepted jobs38. Such choice, which often requires a bargain process with the customer, may also impact on the acceptance decision because, if the required due date is too thigh, the manufacturer could incur into penalties, and could even jeopardize the respect of the overall production plan, by trying to preempt a critical job, to speed up its delivery. Hence, customer enquiry stage and order acceptance are generally treated in parallel.
The job release phase is the crucial part of a WLC system. The adopted technique for selecting and releasing orders from the PSP to the shop floor can make the difference between a successful and unsuccessful WLC implementation3. Specifically, all jobs pending in the PSP are periodically considered for possible release to the shop floor. This task is performed in sequence, by considering one job at a time, from the first to the last one in the PSP. In the PSP, indeed, jobs are sorted in order of priority, typically by means of a dispatching rule, which is usually the same used to sort jobs in the shop floor. Release depends both on the workload of the considered job and on the current system’s state (expressed as the level of the norms), as detailed below.
Let (w_{j,m}) be the workload of job (j) on machine (m) and let (tilde{j}) be one of the job in the PSP. When, at time (t), (tilde{j}) is selected for possible release, its workload (w_{{tilde{j},m}}) is used to update the cumulative workload released to the system ((W_{t})) and/or that released to a specific machine ((W_{m,t} )).
The update is done as in Eqs. (1) and (2), whereas the cumulative workloads are computed as in Eqs. (3) and (4), respectively.
where (t^{ + }) is the time immediately after job (tilde{j}) has been selected for possible release, (J_{{left( {S,m} right)}}) is the subset of jobs released in the shop floor, which still need to visit machine m, (w_{{tilde{j},m}}) equals zero for all machines m that does not lay on the routing of job (tilde{j}).
It is worth noting that these equations are used at different times. Whereas Eqs. (1) and (2) are related to the selection process, Eqs. (3) and (4) are triggered by the manufacturing processes in the shop floor. Equations (1) and (2), in fact, are evaluated any time a job of the PSP is select for possible release, whereas Eqs. (3) and (4) are applied every time a job in the shop floor moves from a machine to the next one.
We also note that, if a single norm is used to constrain the cumulative workload of the system (W_{t}), the release phase is named ‘total shop load’ control. Conversely, if multiple norms are used to limit the cumulative workload (W_{m,t}) of individual machines, the release phase is labelled as ‘bottleneck load’ or ‘load at each machine’, if control is limited to the supposed bottlenecks or extended to all machines, respectively (for more details, see39,40,41).
Anyhow, the updated values (W_{{t^{ + } }}) or (W_{{m,t^{ + } }}) are compared to the system’s norms and the job (tilde{j}) is released to the shop floor, provided that none of the norms is violated. If not so, (tilde{j}) remains in the PSP and the process is iterated until the whole list of jobs in the PSP has been completed.
Relatively to the release phase, another crucial decision regards the quantification of the individual workloads (w_{j,m}) of the entering jobs. Generally speaking, the workload released to a certain machine (m) can be split into a direct and an indirect part. The first part is related to the jobs that are in the queue of machine (m); this part is considered ‘direct’ because these jobs are currently using the productive capacity of machine (m). The second part, instead, is due to the jobs that are still upstream of machine (m) and that will visit this machine later on. This part of the workload is considered ‘indirect’ because these jobs will use the productive capacity of machine (m) only in a later moment. Hence, the workload (w_{j,m}) should be fully included in (W_{m}) if job (j) is queuing at machine m and should be partially included in (W_{m}) if job (j) is still upstream of m. In other words, (w_{j,m}) should be rescaled (or reduced) to consider the time lag that will elapse before (j) reaches (m): the more (m) is downstream, the fewer load should be attributed to it 42. How to properly rescale the workload (w_{j,m}) is a highly researched topic. A first attempt, known as the Load Oriented Order Release (LOOR) approach, was proposed by 43, who dynamically rescales (w_{j,m}) using a depreciation factor obtained through a statistical (mainly regression based) analysis. Other probabilistic approaches have been proposed next as in44,45. Also, a specific methodology was developed at Lancaster University Management School, also referred to as LUMS methodology, designed for the specific needs of MTO companies and concentrated upon the Aggregate Load field of WLC. However, despite the research interest that they roused, these approaches have seldom found their way into practice and nowadays they are increasingly less used in the literature46. As47 pointed out, in fact, sophisticated methods are too complex for a straightforward application in the industry and, consequently, they have been misused for lack of understanding and neglected over time. To solve this operational problem, other authors (see for example48) simplified the problem by considering (w_{j,m}) as a fixed value equal to the sum of the processing and set up time of job j on machine m. This approach is known as the ‘aggregate approach’, since the direct and indirect part of the workload are not differentiated and (w_{j,m}) is never rescaled, not even if job (j) is queuing at a machine upstream of (m). A more refined alternative, known as the ‘corrected aggregate approach’, is frequently applied too.
According to this approach, introduced by 33, the workload is rescaled as in Eq. (5):
As Eq. (5) shows, the rescaling rule is very simple, as the corrected load (tilde{w}_{j,m}) is obtained using as scaling factor the position (n_{j,m}) of machine (m) in the routing of job (j). Like the ‘aggregated approach’, the load is rescaled as soon as job (j) is released and, next, the value of (tilde{w}_{j,m}) will no longer be changed. The use of the corrected aggregate approach is generally preferable, as it assures high performance, and it also simplifies the fine-tuning of the norms, as described in greater details by15,41.
Finally, jobs in the shop floor are managed as in a standard batch and queue system, i.e. they are pushed from a machine to the next one. For this reason WLC is generally considered a hybrid push–pull technique. Hence, when more jobs compete for the same machine, WLC uses some predefined dispatching rule. However, if norms have been properly fine-tuned, queues tend to be short and stable and so jobs dispatching become a less important issue that can be simply treated using one of the manyfold dispatching rules proposed in the literature49. For a comprehensive discussion of the most common dispatching rules we refer the interested reader to50.
As already mentioned, WLC assessment is frequently carried on using tardiness and/or percentage of tardy jobs as performance indicator. However, some examples of alternative measures can be found in the literature, as exemplified in Table 1, which shows the most common measures grouped in the broad categories suggested by4. We note that, with respect to4, the internal co-ordination category is not reported. To the best of the authors knowledge, in fact, such measures (e.g. co-ordination between production and marketing) have not been used in the last decade.
Almost all the metrics reported in Table 1 are self-explaining; only some of them deserve some further comments. Supply chain time was introduced by53 to measure lead time of a MTO supply chain of highly customizable goods. Also58, uses two interesting measures, namely the Strike rate, that is the proportion of successful quotations among total enquiries, and the Production yield, referred to as the successful rate of the production of a product, or the percentage of jobs that do not generate quality problems, such as reworks or scraps.
It is important to observe that most of the studies makes use of ‘time related’, ‘dependability’ and ‘shop load-related’ measures, with the first two categories being the most widely used6. ‘Market-related’ measures are, indeed, less common: the table reports59, for instance, which compared alternative production planning and control systems in terms of the generated volumes (and monetary value) of the accepted orders; and58, where the information architecture for WLC is detailed, reporting a case study of a small precision-engineering MTO manufacturer.
Although the set of available measures is rather ample and variegated, a common and standard way to assess real-word performance of WLC and, more in general, of a PPC system, is still missing. Researchers, in fact, are often tempted to report the measures that better confirm their hypotheses, often arguing that those performance measures are the most pertinent in the industrial case under analysis. Consequently4, suggested that researchers should “ask themselves whether the same set of measures should be used to assess WLC implementation in practice, in order to determine appropriate measures for their project”. Unfortunately, despite this suggestion, many scholars still continue to use very specific measures that might fail to capture the overall benefits of a PPC system, also due to the fact that some of these measures are conflicting (e.g. short lead time versus high service level, or high volume of orders versus small percentages of tardy jobs) a fact that makes extremely hard the definition of adequate benchmarks. The need, and the relevant practical implications, of a standardized measure is evident, but little has been done so far, toward this goal.
A recent stream of research has indeed started to investigate WLC performances from a more comprehensive point of view. A preliminary single-machine cost function was proposed in 1997 by60, by calculating a weighted sum of the WIP and tardiness costs under a periodic order release policy. The first cost function that could be applied to a WLC system, however, can be found in the influential work of Asmundsson et al.61, proposing the clearing function models, which are deemed as advanced and widely used models to date in terms of optimization-based order release models30. In 201162, jointly considered different and potentially conflicting performance measures, by converting them in monetary terms. The same approach was followed by63, who compared alternative production plans considering three different kind of costs: (i) WIP holding costs, (ii) finished goods holding cost, and (iii) backlog cost. Within this stream of research28, reported an interesting experimental comparison of different iterative approaches and a clearing function, estimated by means of two different approaches, in a simplified model of a wafer fabrication facility. One year after27, implemented two linear programming models for cycle time estimate and presented the computational testing of a production planning model based on clearing functions on a large-scale data set that represents a wafer fabrication facility with two products. The performances of different plans are then compared based on the profit realized by the facility when the execution of the plans is simulated. Reference26 assessed and compared, under a wide range of operating conditions, the performances of a production planning model with fixed lead times and a second model with workload-dependent lead times in a rolling horizon setting.
Another emerging stream of research has made use of adaptive planning system, such as machine learning algorithms and artificial neural networks, to dynamically set lead times, plan capacities and decide on whether to release orders or not15,24,25,41. Finally, starting from the seminal work29, interesting studies have been carried out in the very last years to bring together and compare the rule-based WLC, i.e. order release mechanisms determining the release times of the orders by means of a set of rules, and optimization-based WLC, i.e. multi-period order release mechanisms that use optimization models20,22,30.
While we praise the effort of these authors, we also note that:
To the best of our knowledge, an economic valorization has seldom been used in rule-based WLC literature;
Relative to such a WLC scenario, the cost structures proposed are not complete, as they do not account either for production costs or for sales prices, thus missing the huge difference between accepted and non-accepted customer’s orders;
A general method for economic evaluation of WLC systems is still missing in rule-based WLC literature.
The approach to properly evaluate WLC based upon economic considerations is the topic of the following sections.
Our proposal is to evaluate performances of different WLC systems, by considering incomes and costs items that closely match the classification structure provided in Table 1. All proposed costs and incomes are traditionally used in inventory management theory and can be easily estimated and measured in production systems64. If a Manufacturing Execution System is in place, all the inputs of the income/cost equations (provided next), can be easily collected on the field. Should this not be the case, the standard costs and the standard times reported, respectively, in the bill of materials and in the production-cycle can be used as a viable alternative. Similarly, if a simulation model is needed, these costs can be easily embedded in the simulation logic and used to fine tune the norms and to operate the system at the point of maximum economic viability.
The first category contains two costs items related to the time a job has spent in the shop floor, either being processed or waiting in queue. These are the Transformation ((TR)) and WIP Holding costs ((WH)), respectively. Concerning (TR), it includes direct materials costs, all direct production costs (sustained on the shop floor) and, eventually, the setup costs, as shown in Eq. (6).
where ({mathcal{M}}_{j}) is the total cost of the direct materials (or parts, or components) used to manufacture job (j), (t_{j,m}) is the actual processing time of job (j) on machine (m), (p_{m}) is the cost of use per unit of time of machine (m), which should include depreciation, energy, direct labor and, eventually, auxiliary operating costs, (mathcalligra{t}_{{j,m}}) is the actual setup time of job (j) on machine (m), (b_{j}) is the batch size of job (j), (s_{m}) is the setup cost per unit of time.
If needed, the handling costs related to the distance covered by a job along its route could be included in Eq. (6) too. We decided not to do so, because handling costs (as well as other cost items of logistic nature) depend on the layout of the system but not on the way in which a WLC system has been dimensioned and fine-tuned. The same would not be true if the aim were to compare alternative PPC systems that leverage on specific handling and/or feeding systems such, for example, as a dual Kanban system with milk-run feeding strategy65. In this case, indeed, handling costs would change with the considered alternative. Please note that also the transformation costs herein considered do not depend on the adopted WLC system; yet a precise quantification of these costs is essential for a correct valorization of WIP and Stocks that, instead, are highly influenced by the WLC system in use.
Concerning (WH), this item accounts for the cost sustained to hold work in process in the shop floor and it is obtained by multiplying the total time in the system, or Shop Floor Throughput Time ((SFTT)), for the unitary holding cost per unit of time (h). That is:
The holding cost (h_{j}) depends on the value of job (j) and, therefore, it increases as job (j) moves downstream its manufacturing process. Also, assuming that materials are evenly added throughout the manufacturing process (as for an assembly line) and that the cost of use (p_{m}) does not vary much from one machine to another, the increase of (h_{j}) can be considered linear. So, the holding cost can be expressed as in Eq. (8):
where (k_{h}) is a fixed coefficient lower that one, and (0.5TR_{j}) is the average value of job (j).
If all materials enter at the beginning of the production cycle, the computation of the holding cost changes as in Eq. (9):
This category contains the costs incurred by the company to meet customers’ needs in terms of delivery times. Two items are considered, namely the Storage costs ((ST)) of end goods and the Penalty costs ((PN)).
The first item, related to earliness, accounts for the fact that orders completed on time must remain in stock for some time before being finally aggregated with other orders and dispatched to the end customer. So, expenses for storage of the manufactured items are incurred. The second item, instead, is related to tardiness and is incurred anytime orders are shipped late. Note that penalties may be explicitly agreed with the customer at the contractual level, but even if this were not the case, an implicit cost should be considered, at least to cover for backlog issues such as: customer compensation for delay, loss of goodwill, expedited shipping, potential loss of future orders, as well as for other indirect costs. Also note that storage and penalty costs can be considered as mutually exclusive, as either one or the other must be null for every order. Indeed, it can be assumed that late orders are never held in stock (or are held for a very short time) but are shipped immediately.
Operatively, akin the holding cost for WIP, also the holding cost of the finished goods are obtained by multiplying the time spent by a job in the finished goods inventory for its monetary value. Since jobs have been completed and are ready to be delivered, their value coincides with the total transformation costs. So, we have that:
where (IT_{j}) is the total inventory time and the unit holding cost ({mathcalligra{h}}) is again obtained as a fraction of the total transformation cost (TR_{j}).
Penalties costs are harder to be estimated, and this topic has been intensively studied in the Make-To-Stock sector, whose literature on Out-Of-Stock could provide some interesting suggestions to the reader (see for example66,67 for quantitative studies on Out-Of-Stock in the fast-moving consumer goods sector). Yet, neglecting costs of penalties would lead to an inaccurate cost structure. So, our suggestion is to calculate (PN) by multiplying a unitary penalty cost (or fee) per unit of time, say (f), for the total delay (D), expressed as the positive difference between the shipping time (ST) and the due date (DD) agreed upon with the customer. So, we have:
where in analogy with the holding cost, the coefficient (k_{p}) is used to express the penalty (f) as a fraction of the sale price (P), per unit of delay time. We note that it could be wise to limit the penalty cost to a maximum value, such as a given percentage of the sales price, to rule out the risk of unrealistically higher penalty costs due to very long delays.
For a fair comparison, the generated turnover should be included in the analysis, too. Different PPC systems, in fact, may lead to a different throughput rate and, consequently, to non-negligible changes in the production volumes and turnover. Note that this issue is even more stringent when WLC is considered, as different ‘job acceptance’ rules may modify not only the productive volumes, but also the productive mix, with strong impact on the overall profitability.
In case of MTO companies, production is activated upon customer’s demand and each accepted job is sold at the selling prince contractually defined with the customer. So, turnover ((TV)) can be easily obtained summing up the selling prices of all the jobs delivered in the considered time interval. Instead, in case of simulation, we suggest compute the turnover of job as in Eq. (12):
where (delta > 0) is a mark-up percentage applied to the total transformation cost.
The mark-up should cover the indirect industrial costs, a quota of the overhead costs and, eventually, it should generate a profit. This percentage is generally available in the cost accounting system of the firm.
To demonstrate the need to introduce the economic model to assess the quality of a WLC system, we reproduced the High-Variability Low Volumes (HVLV) six-machines job-shop, which is typically used as a benchmark in technical literature68. To this aim we used Simpy©, an open-source discrete event simulation package, developed in Python 3.7©.
Concerning the simulated job-shops:
All the six machines are equally loaded, with an average utilization rate or 90%;
They all have constant capacity and full availability;
Materials and resources are always available; machines can be idle, but starvation never occurs;
The job shop is ‘pure and randomly routed’. In this regard:
Each job is processed by (N) machines, with (N) uniformly distributed in the range (left[ {1, ,6} right]);
The order in which machines are visited is random, but half of the generated jobs has a ‘directional routing’, while the other half has a ‘purely random routing’. Specifically, machines are labelled with a progressive number (from 1 to 6) and, in case of directional routing, for each couple of successive machines (left( {i,k} right)) in the routing of job (j), (k) must be greater than (i).
Rerouting is not allowed, i.e., a machine cannot appear on the routing of job (j) more than once.
Processing time (t_{j,m}) (of each job (j) on each machine (m)) follows a Gamma Distribution with shape parameter (k = 2) and scale parameter (theta = 0.52). Hence the average processing time on each machine is (overline{t} = 1.05) time units and the coefficient of variation is (CV = 0.707). This choice is typical to reproduce the processing time variability of HVLV job-shops.
Set-up times must be performed any time a machine processes a new job, but they are not sequence dependent. Hence, set-up times are not explicitly defined, but simply included in the processing times (t_{j,m}) generated from the Gamma distribution described above;
Jobs are generated according to a Poisson process, with exponential distributed inter-arrival times. An arrival rate ({ }lambda = 1.45) units of time was chosen to obtain, in a purely push-operating system (i.e., jobs never wait in the PSP), the desired 90% utilization rate, for each machine.
Concerning the WLC used to regulate the job-shop, aiming to investigate how performance and costs change as the operating setting changes, a rather ample set of alternative were tested, as detailed next:
Job entry – All generated jobs are always accepted (i.e., total acceptance rule) and an exogenous due date, imposed by the customer, is assigned to each job upon arrival. The value of the due date is randomly generated following the same logic proposed by ample WLC research. Specifically, as shown in Eq. (13) the due date of job (j) is obtained adding to the arrival time (AT_{j}) the expected total processing time (left( {overline{t} cdot N_{j} } right)) and a uniformly distributed random allowance (U).
where (n) is a natural number used to include the extra allowance factor (noverline{t}) in the expected processing time (N_{j} overline{t}).
Job Release, the following sub setting were used:
Jobs in the PSP are considered for possible release every 24 units of time;
Norms are defined as upper bound of the workload (expressed in units of expected working time) either using the Total Shop (TSL) load or the load at each machine approach (LEM). So, the decision of releasing a job depends on the value of (W_{t}) or of (W_{m,t}) in the first and second case, respectively. Also, in case of load at each machine the upper bound set on (W_{m,t}) is the same for all machine (m); a natural choice for a perfectly symmetric job-shop whit equivalent and equally loaded machines.
The workload contribution of each entering job is quantified either using the aggregated (AGG) or the corrected aggregated (CAGG) approach, computed as in Eqs. (3) and (5), respectively.
Job Dispatching—Two alternative dispatching rules, namely First In First Out (FIFO) and Planned operation Start Time (PST) are used. The first one is extremely easy (jobs simply queue up) and is the one that minimizes work in process; the second one is very effective in minimizing tardiness or other time related performances69. Specifically, when the PST rule is in use, jobs are sorted in ascending order of their planned operation start time. The later one is computed as in Eq. (14):
Where (n) is a natural number and (tilde{N}_{j} le N_{j}) is the number of machines that are yet to be visited by job (j), so that (tilde{N}_{j} overline{t}) is the remaining expected processing time. In brief, therefore, (PST_{j}) is an estimate of the net time that is still available to complete the job in time.
Concerning the allowance factors of Eqd. (13) and (14), we consider (U) as uniformely distributed on the interval (left[ {0, 30} right]) and we set (n = 2). Both values were empirically defined via simulation, to maximize the percentage of on time deliveries when the job-shop operates in purely push way and the PST rule is used, provided that the percentage of on time deliveries does not drop below 75% (considered as a realistic value) when the FIFO rule is used instead. For the sake of clarity, the settings used for the Job-Shop and for the WLC system are summarized in Table 2.
In brief, a total of eight alternatives configurations were obtained, by combining 2 aggregations of workload measure, 2 workload accounting systems and 2 dispatching rules, that is 2 different options for each variable parameter that we considered in our simulation (namely Aggregation of workload measure, Workload accounting over time and Dispatching rule).
Hence, we have 3 variables, each of which can assume 2 alternative levels. Also, if we consider the baseline WLC policies (i.e., total shop load, aggregated approach, FIFO rule) as ‘low factor levels’, and the alternative policies as ‘high factor levels’ (i.e., load at each machine, corrected aggregated approach, PST rule), the design scheme that we tested corresponds to a (2^{3}) full factorial design with repetitions.
For each one of the eight investigated configurations, we recorded the performance observed for different levels of the norms. More precisely, starting from an almost infinite level, corresponding to a purely push operating system, we progressively constrained the system by reducing the norms’ level proceeding with step of 1%. This procedure was interrupted as soon as the observed throughput dropped below 1.44 [jobs per time unit], that is the lower end of the 95% confidence interval of the throughput of the unconstrained system. In this way the full domain of the solutions ensuring the maximum throughput is obtained, with the last generating one corresponding to the condition that minimizes work in process and queues. For each investigated point we performed a simulation trial of 10 runs, each of 3650 units of time. A warm-up period of 1200 units of time, enough to reach the steady state of the system, was also included in each simulation run. These simulation parameters are consistent with those generally used in case of job-shop simulations and provide stable results in an adequate amount of time.
An example is given in Fig. 1, where the percentage of jobs delivered in time (performance measure) is plotted on the (y) axis, versus the norm level plotted on the ({ }x) axis. Note that the latter one is expressed as a percentage of the unconstrained case, that is a value equal to 100% correspond to an unconstrained system (i.e., norms are never violated, and jobs are always released upon arrival, without pending in the PSP).
Trend of the percentage of tardy job of eight WLC configurations.
A first consideration concerns norm levels, marking a significant difference between FIFO rule, performing much better in terms of on time jobs for low values of the norms, that is a relatively starved system, and PST rule, which overperforms FIFO at higher norm levels (i.e., roughly above 55%).
Figure 1 is also in line with WLC literature to confirm that better on time performances are obtained with the load at each machine approach and with PST dispatching rule to sort jobs both in the pre-shop pool and in the shop floor. However, in this case, a clear maximum does not exist, as the red curves flatten out for high values of the norms, when the WLC system approximates a purely push-operating job shop. In other words, in terms of the percentage of on time orders, the performance of a purely push system based on the PST rule does not deviates much from that of a WLC system. The system, in fact, is undersaturated (90% utilization level) and so, even if jobs are pushed in production, queues do not diverge, and the use of an appropriate rule (such as the PST) is enough to assure a good performance. Also note that the red curves fall very quickly when work in process is reduced moving from right to left, that is when moving away from the purely push condition. Hence, improvements achievable in terms of WIP reduction are limited. Conversely, as the blue curves demonstrate, the FIFO rule coupled with the load at each machine approach ensures a high reduction in WIP at the expense of a modest deterioration of the percentage of on time deliveries. In this case, in fact, there is a clear maximum point, which is located in the left-hand side of the graph.
So, as anticipated in “Performance assessment of a WLC system” section, there is a clear trade off among different solutions, and choosing one of them based on a single criterion could be somehow misleading. This concept is expressed in an even clearer way by Table 3 where, for each investigated WLC configuration, the average value of the following performance measures is given:
Gross Throughput Time—GTT, the overall time spent by a job in the system both as an order pending in the PSP, or as an actual job being processed on the shop floor.
Shop-Floor Throughput Time—SFTT, the overall time spent by a job in the shop floor (also known as production Lead Time).
Work In Process—WIP, the amount of jobs processed in the shop floor, measured as units of remaining working time.
Percentage of jobs in time—% IN TIME, the number of jobs completed and delivered before their due date over the total number of accepted jobs.
Tardiness—Tar, the difference between the completion (or delivery) time (C_{j}) and the due date (DD_{j}), if the difference is positive, zero otherwise., i.e., (T_{j} = {text{max}}left{ {0,left( {C_{j} – DD_{j} } right)} right}).
Earliness—Ear, the difference between the due date and the completion time, if the difference is positive, zero otherwise., i.e., (E_{j} = {text{max}}left{ {0,left( {DD_{j} – C_{j} } right)} right}).
As anticipated, all these metrics are evaluated in average terms, with the exception of the tardiness, for which we have also provided its maximum value and its conditional expectation ({mathbb{E}}left[ {Tleft| T rightrangle 0} right]), that is the mean taken on jobs with non-zero delay only. We also note that, since both the earliness and the tardiness were provided, we decided not to include the earliness (E_{j} = left( {C_{j} – DD_{j} } right)) in Table 3. For the sake of completeness and of clarity the overall best is displayed immediately underneath the corresponding metric, and it is also highlighted in light blue color.
Lastly, we note that, for each considered configuration, norms have been fined tuned relatively to three alternative objective functions that, as indicated in the fifth column of the table are: (i) the minimum level of WIP, (ii) the maximum percentage of on time delivery, and (iii) the minimum tardiness. For this reason, the table is organized in blocks of three rows, one for each configuration and objective function. Note that sometimes, the values of two adjacent rows may be identical (as for rows 13 and 14); in these cases, although fine tuning was made with respect to different performance parameters, the same configuration (in terms of norm levels) was found.
As a benchmark, the same parameters have also been computed for the purely push-operating system equipped with FIFO and PST rules, respectively.
The WLC configuration based on the load at each machine approach, with corrected aggregated workload and PST dispatching rule, is the one that seems to perform best, as it optimizes three out of eight metrics. Yet, a clear dominant solution does not exist and, even more surprisingly, the minimum maximum tardiness is provided by the push operating system with PST dispatching rule.
An overall view of this fact is finally given by the radar chart of Fig. 2, where obtained performances are shown in relative terms. Specifically, we included in the chart all the configurations that achieved the absolute maximum for at least one performance. These configurations correspond to the rows 2, 13, 15, 17 and 19 that are highlighted in grey in Table 3. Note that configuration 2 is the push case, while configurations 13, 19 and 25 are the ones that optimize time related performances. As already noted, they all have a trend very similar to that of the push case, except for the maximum tardiness, that is reduced. We note that Fig. 2 also includes configuration 25, a WLC configuration that achieved good performances, on average, on all metrics.
Radar plot of the observed performance indicators.
Even this plot clearly shows that, if WLC is fine tuned to minimize lateness related objectives the difference between WLC and Push are marginal, and perhaps not enough to justify WLC implementation in the industry. Besides, relevant improvements can be obtained focusing on WIP reduction, especially when dispatching rules less prone to the prioritization of urgent orders are used. In this case, however, while it is still possible to keep the percentage of jobs in time at a fairly good level, the number of outliers with a very high tardiness increases significantly (see for example row 15 and 17 of Table 3). These are the jobs with high workload that wait a long time in the PSP before being released and that, once in the shop floor, although being late, are not prioritized and go through all the queues.
It is thus clear that selecting and fine tuning a WLC configuration based on a single metric is a myopic approach, that may lead to a sub-optimal solution that does not exploits the full potentiality of WLC. Hence, in the following section we will discuss how the use of the economic approach herein proposed can be effective to solve this problem.
To introduce adequate costs in the simulated scenario, the following parameters were used:
Cost of direct material ({mathcal{M}}) uniformly distributed on the interval (left[ {10, 30} right]).
Processing cost per unit of time (p_{m} = 17.75), for each machine (m).
Stock holding coefficient (k_{h} = 0.12%).
Penalties coefficient (k_{p} = 3k_{h} = 0.36%).
Mark Up coefficient (delta = 17.5%).
We also note that:
All direct materials are supposed to be added to a job at its first operation, so Eq. (9) can be used.
Since setup time were included in the processing time of each job, we also assumed that the quota of the setup cost per job is included in the processing cost per unit of time (p_{m}).
We limited the maximum penalty to the contractual selling price (P_{j}), that is (PN_{j} = {text{min}}left{ {P_{j} ,left( {k_{p} P_{j} T_{j} } right)} right}), where (T_{j}) is the tardiness. Hence, if the tardiness is so high that the penalty equals the contractual price the income is null (as for a lost sale) and there is a loss equal to all costs incurred.
Using these settings, in the baseline case (i.e., the push operating system with FIFO dispatching rule) the average selling price is 100, the average total cost is 90, for an expected operating revenue, which we will simply refer to as revenue per job, of 10 units for each job sold. We note that the system we proposed could be easily adapted to different cost and income settings.
The trend of the average revenue per job (on the (y) axis) versus the norm level (on the (x) axis) is shown in Fig. 3, for all eight investigated configurations (see also Fig. 1 and Table 2). We note at first that the PST norm significantly outperform FIFO in terms of Revenue per Job. Also, WLC configurations with Aggregated load perform slightly better than those with Corrected aggregated load, and the Aggregated load at Each machine achieves the highest value of Revenue per job. However, we believe important to note that, although the curves, and specifically PST curves (i.e. the red-brown ones), are rather flat for high values of the norms, a global maximum always exists as all curves are convex. This fact means that all WLC configuration we tested achieved a maximum in the Revenue per job function for some value of the norm below 100%, i.e. in a non-push condition.
Trend of revenues per job of eight WLC configurations.
To assess the impact that our the operational parameters we selected have on costs and incomes, we performed a preliminary 4-ways ANOVA. Specifically, we used the revenue per job as response variable and (i) Norm level, (ii) Aggregation of workload measure, (iii) Workload accounting over time and (iv) Dispatching rule as factors. The analysis confirmed all the hypotheses and indeed all factors and interactions were significant with a (p)-value lower than 0.005, with the only exception of the Workload accounting over time criterium, i.e. aggregated load vs. corrected aggregated load. For this reason, we excluded it from the analysis from now on. For a more detailed explanation on this point, please refer to Online Appendix A.
This fact is confirmed by the one-way ANOVA of Tables 4 and 5, that reveals that the points of maximum revenue per job of the alternative configurations differ significantly, in statistical terms. Note that, since the effect of the Workload accounting over time resulted non-significant in the preliminary 4-ways ANOVA, the analysis was limited to four WLC alternatives and the push system was taken as benchmark.
As Table 4 reports, revenues per job clearly differ when the PST rule is used instead of the FIFO one. This fact was also confirmed by a Tukey–Kramer post-hoc test (at level (alpha = 0.1)); a synthesis of the pairwise comparison is provided in Table 6, which also highlights a significant difference between the optimal WLC configuration and the corresponding push condition (reported with bold character in Table 6).
It is interesting to note that the WLC configuration that maximizes the expected Revenue per job is the same one that maximized the percentage of on time deliveries (as we found in “Performance assessment of a WLC system”section), namely Aggregation of workload method: Load at each machine; Workload accounting over time: Aggregated; and Dispatching rule: PST. Yet, as it is shown by Table 7, the operating point that maximises the value of Revenue per job clearly differs from the one that maximizes the percentage of jobs delivered in time. Specifically, as it is shown in Table 7, which displays the norm level at each machine, either in units of time, or as a percentage relative to the norm of the push case, to maximise revenues in our specific scenario it is advisable to reduce the level of the norms to reduce WIP and stockholding costs. This improvement is large enough to positively balances the extra costs related to a small deterioration of the percentage of on time deliveries, that are necessarily incurred when the norms’ level is reduced. It is also worth noting that the difference in expected revenue, obtained at these two alternative operating points, is statistically significant with a p-value of a one-tailed T-test (ll 0.01). On the contrary, the expected revenue of the WLC system maximizing the percentage of jobs delivered in time does not significantly differ from that of the benchmark push-system, with a p-value > 0.1. This is another clear indication of the opportunity to fine-tune a WLC system considering the expected Revenue per job, rather than a single performance measure.
Clearly, the results we discussed above depend on the cost structure under analysis and, most of all, on the values of the coefficients (k_{h}) and (k_{p}) used to estimate the stockholding and the penalties cost, respectively. As above discussed, in fact, these costs directly reflect antithetical operating performances (mainly WIP level and tardiness) for which a tradeoff must be achieved. Hence, for a further insight, we repeated the optimization analysis for different values of the cost ratio (r = left( {frac{{k_{p} }}{{k_{h} }}} right)), by fixing (k_{h}) at its original value of 0.12% and by progressively reducing (k_{h}) from (8k_{h}) to (0.25k_{h}). Obtained results are graphically summarized in Fig. 4, which shows the maximum expected revenue that can achieved using the most effective WLC configurations, each one fine-tuned for each level of the investigated cost ratio (r).
Sensitivity analysis.
As it can be seen, the WLC configurations based on the aggregate approach, load for every machine and the PST rules is almost ever the dominant solutional and the positive gap, increases as the ratio (r) decreases. As already noted, indeed, this configuration is the one that tends to optimize the trade-off between low WIP and short and stable gross throughput time, and this fact becomes particularly relevant as the stockholding costs increase relative to the penalty ones. The only exception is the WLC configuration based on corrected aggregate approach, load for every machine and the PST rules, that becomes the best option for very high levels of the stockholding cost (the indifference point is found around (r = 2/5)). The use of the corrected aggregate approach, in fact, is more precise, but also more selective and binding; hence, relatively to the aggregate approach, it is more performant in terms of WIP, but less in terms of percentage of tardy job. In term of cost, this condition becomes valuables only when (r) is small. For the same reason for low levels (r), even the use of the FIFO policies becomes quite performing, as it outperforms the benchmark push approach, yet it remains lower than the other two configurations. Conversely, the economical gap among the benchmark push approach and the WLC policies based on the PST rule becomes almost inappreciable when (r) is big.
This paper deals with WLC, an hybrid push–pull PPC system that has seen a great deal of attention in the last decades. Focusing on performance assessment of rule-based WLC systems, the paper shows that setting the norms and other operating parameters by considering the percentage of tardy job as the only optimization criterion is generally sub-optimal. To get the most out of WLC, in fact, and to achieve benefits that could justify the required initial investment, practitioners should look for a trade-off between WIP reduction and due date compliance. To simplify this multi-criteria optimization problem, we propose to homogenize alternative performance criteria, even conflicting ones, by translating them in monetary terms. To this aim, we developed a general economic model to properly consider the economic valorization of the operating performances regarding a WLC system, namely the Revenue per job. It is the authors’ opinion, in fact, that such a trade-off might only be identified and analyzed by means of an economic model, which enables the comparison of different system performances. Also, without an economic model that justifies the benefits of WLC, companies, and especially SMEs, will not be supported to implement ‘off-the-shelves’ WLC systems. We do believe, instead, that an adequate and realistic economic calculation of WLC benefits might help SMEs to decide for its implementation. Industrial sectors that could benefit from the approach we propose in this study are sub-contract machining shops, producers of mechanical components (e.g. for the automotive industry) and producers of electronic components (e.g. wafer fabrication).
The model has been finally tested via simulation and validated through a comprehensive statistical analysis. What emerged from the analysis is the fact that the economic optimum point (i.e. the maximum expected revenue per job) hardly ever coincides with the point that optimizes a single performance measure. The difference is even more prominent in case of high stock holding costs, comparable to those related to penalties. We note that the existence of these economic optimum points is calculated in a simulated system taken from the mainstream of WLC research, whose parameters and values have been used with profit by previous studies aiming at minimizing shop floor throughput times and percentages of tardy jobs in WLC systems. Thus, we believe that the existence of said optimum values in the Revenue per job function of such a simulated system justifies the need to look for it from a broader, and more general, perspective. Also, we reported how the specific performances of different WLC configurations might impact on the economic method we propose, and we reported a sensitivity analysis that, starting from the preliminary observations of20,22, shows the results of a continuous variation of the cost ratio r, and it allows the extension of our WLC evaluation approach to different sectors and industries. As an example, if we recall the above-mentioned sectors, a low r value is expected in companies producing electronic components, where penalty costs are higher than holding costs. Conversely, a high r value is typical of sub-contract machining shops and of producers of mechanical components, where WIP value and holding costs are higher. Thus, these sectors could use the model we propose to better understand cost savings or other benefits expected from WLC adoption.
In general, with respect to the WLC configurations we investigated, the best economic performance can be achieved with a WLC system based on aggregate load, load at each machine, and PST dispatching rule. Yet, a WLC system based on the corrected aggregate approach becomes preferable for lower levels of the cost ratio (r = left( {frac{{k_{h} }}{{k_{p} }}} right)). Indeed, in this condition the additional WIP reduction that can be achieved is enough to offset the unavoidable worsening of delivery times. In this regard, it has to be said that our model underestimates the benefits related to WIP reduction. Less WIP, indeed, reduces errors (as visual management becomes easier), and assures other savings related to improved tidiness and reduced occupied space that could be dedicated to other activities. Since these savings have not yet been captured by our model, it is likely that the corrected aggregated approach becomes advantageous also at higher value of the ratio (r). For the same reason, advantages of WLC over the benchmark push-oriented job shop might become evident also for values of (r) lower than 3, where, at the moment, the economic difference between WLC and push is very small. In this respect, we finally note that we limited the analysis to a rather unsaturated system with an average utilization rate of 90%. This decision, which is in line with the mainstream of WLC literature, suggests that the economic advantages achievable by applying WLC to almost saturated systems (i.e., utilization rate of 95% or higher, at least for certain amounts of time), with respect to push-operated systems, could be bigger than what we report. In such conditions, in fact, push systems will greatly diverge from hybrid or pull ones, in terms of queues and shopfloor throughput time. All these issues could be further investigated in subsequent works. Also, aligned with research mainstream on WLC, our model considers only machines as constrained resources. In some situations, this might not be the case, as human resources could be equally critical bottlenecks (e.g. manual assembly station or testing benches). We note that, in these cases, the general approach we followed still holds true, but some improvements are needed, and scientific research on this topic is still scarce. Developing a broader WLC approach capable of operating with a combination of human and machine resources, which takes into consideration the peculiarities of each one of them, could definitely be a topic of future research. Another important aspect that is currently undervalued in most WLC studies is the preliminary identification and mapping, and the subsequent management of critical constrained resources. As we mentioned above, the focus is (almost) only on machines, which are often considered identical in terms of utilization and availability rates. Thus, much WLC research does not consider stable or shifting bottlenecks. Therefore, considering an early identification and management of critical constrained resources, be them human or machines, could bridge the gap among WLC and other PPC systems (e.g. theory of constraints and drum-buffer-rope), and extend the impact of WLC on flexibility, by covering other aspects of flexibility, such as labor and material handling flexibility.
To conclude, we provide a last remark concerning the FIFO policy. As shown in the present paper, although this rule assures significant advantages in terms of WIP, it is always penalizing in economic terms. As discussed in “Performance analysis”section, the problem is mainly related to a minority of jobs requiring very high processing times. The fact is that these outliers wait for very long time in the PSP, before being admitted in the shop floor; also, once in the system, although already late, they are forced to queuing up because of the FIFO policy. Hence, incurred penalties are very high and detrimental in terms of revenue per job. To limit this issue, it could be wise to devise an acceptance policy that rejects new orders with a heavy workload, anytime the workload in the system approaches norms’ level, or to incorporate some other expediting corrections to the order release policy that could improve the system. As an example, only regular job should be sorted using the FIFO rule, whereas jobs that have been waiting for long in the PSP should be prioritized. The economic evaluation of this approach could be the topic of a future work.
The datasets generated and/or analysed during the current study are available in the ‘wlc-economic-valorization’ repository, available at the current web link: https://github.com/dmezzogori/wlc-economic-valorization. Please, note that the repository might be amended and improved at a later stage, upon paper’s acceptance or by answering to reviewers comments.
Thürer, M., Stevenson, M. & Silva, C. Three decades of workload control research: A systematic review of the literature. Int. J. Prod. Res. 49(23), 6905–6935 (2011).
Article  Google Scholar 
Thürer, M., Stevenson, M. & Land, M. J. On the integration of input and output control: Workload Control order release. Int. J. Prod. Econ. 174, 43–53 (2016).
Article  Google Scholar 
M. Bertolini, G. Romagnoli, F. Zammori, and D. Uckelmann, “An industrial perspective on Workload Control: Economic evaluation and suitable technologies,” in Proceedings of 2017 International Conference on Industrial Engineering and Systems Management, IEEE IESM 2017, 2018, p. Paper in press.
Hendry, L., Huang, Y. & Stevenson, M. Workload control: Successful implementation taking a contingency-based view of production planning & control. Int. J. Oper. Prod. Manag. 33(1), 69–103 (2013).
Article  Google Scholar 
Raaymakers, W. H. M., Bertrand, J. W. M. & Fransoo, J. C. Performance of workload rules for order acceptance in batch chemical manufacturing. J. Intell. Manuf. 11(2), 217–228 (2000).
Article  Google Scholar 
M. Bertolini, G. Romagnoli, and F. Zammori, “Simulation of two hybrid production planning and control systems: A comparative analysis,” in Proceedings of 2015 International Conference on Industrial Engineering and Systems Management, IEEE IESM 2015, 2016, pp. 388–397.
M. Bertolini, G. Romagnoli, and F. Zammori, “Assessing performance of Workload Control in High Variety Low Volumes MTO job shops: A simulative analysis,” in Proceedings of 2015 International Conference on Industrial Engineering and Systems Management, IEEE IESM 2015, 2016, pp. 362–370.
Zammori, F., Ferretti, C., Ganugi, P. & Mezzogori, D. Workload control with shifting bottlenecks: Norms optimisation through design of experiments. Int. J. Math. Model. Numer. Optim. 11(4), 355 (2021).
Google Scholar 
Bertolini, M., Romagnoli, G. & Zammori, F. 2MTO, a new mapping tool to achieve lean benefits in high-variety low-volume job shops. Prod. Plan. Control 28(5), 444–458 (2017).
Article  Google Scholar 
Stevenson, M., Huang, Y., Hendry, L. C. & Soepenberg, E. The theory and practice of workload control: A research agenda and implementation strategy. Int. J. Prod. Econ. 131(2), 689–700 (2011).
Article  Google Scholar 
Fernandes, N. O., Land, M. J. & Carmo-Silva, S. Workload control in unbalanced job shops. Int. J. Prod. Res. 52(3), 679–690 (2014).
Article  Google Scholar 
Thürer, M., Fernandes, N. O., Stevenson, M. & Qu, T. On the backlog-sequencing decision for extending the applicability of ConWIP to high-variety contexts: An assessment by simulation. Int. J. Prod. Res. 55(16), 4695–4711 (2017).
Article  Google Scholar 
Petroni, A., Zammori, F. & Marolla, G. World class manufacturing in make-to-order batch-production SMEs: An exploratory analysis in northern Italy. Int. J. Bus. Excell. 11(2), 241 (2017).
Article  Google Scholar 
Gómez Paredes, F. J., Godinho Filho, M., Thürer, M., Fernandes, N. O. & Jabbour, C. J. C. Factors for choosing production control systems in make-to-order shops: A systematic literature review. J. Intell. Manuf. 33(3), 639–674 (2022).
Article  Google Scholar 
Mezzogori, D., Romagnoli, G. & Zammori, F. Deep learning and WLC: How to set realistic delivery dates in high variety manufacturing systems. IFAC-PapersOnLine 52(13), 2092–2097 (2019).
Article  Google Scholar 
Melnyk, S. & Ragatz, G. L. Order review/release: Research issues and perspectives. Int. J. Prod. Res. 27(7), 1081–1096 (1989).
Article  Google Scholar 
Singgih, I. K., Yu, O., Kim, B. I., Koo, J. & Lee, S. Production scheduling problem in a factory of automobile component primer painting. J. Intell. Manuf. 31(6), 1483–1496 (2020).
Article  Google Scholar 
Moon, I., Lee, S., Shin, M. & Ryu, K. Evolutionary resource assignment for workload-based production scheduling. J. Intell. Manuf. 27(2), 375–388 (2016).
Article  Google Scholar 
Hopp, W. W. J. & Spearman, M. L. M. To pull or not to pull: What is the question?. Manuf. Serv. Oper. Manag. 6(2), 133–148 (2004).
Article  Google Scholar 
Neuner, P. & Haeussler, S. Rule based workload control in semiconductor manufacturing revisited. Int. J. Prod. Res. 59(19), 5972–5991 (2021).
Article  Google Scholar 
E. Albey and R. Uzsoy, Lead time modeling in production planning, in 2015 Winter Simulation Conference (WSC), 2015, pp. 1996–2007.
Schneckenreither, M., Haeussler, S. & Gerhold, C. Order release planning with predictive lead times: A machine learning approach. Int. J. Prod. Res. 59(11), 3285–3303 (2021).
Article  Google Scholar 
Kutanoglu, E. An analysis of heuristics in a dynamic job shop with weighted tardiness objectives. Int. J. Prod. Res. 37(1), 165–187 (1999).
MATH  Article  Google Scholar 
M. Schneckenreither and S. Haeussler, Reinforcement learning methods for operations research applications: The order release problem, vol. 11331 LNCS, no. 2016. Springer International Publishing, 2019.
Schneckenreither, M., Windmueller, S. & Haeussler, S. Smart Short Term Capacity Planning: A Reinforcement Learning Approach. In Advances in Production Management Systems. Artificial Intelligence for Sustainable and Resilient Production Systems: IFIP WG 5.7 International Conference, APMS 2021, Nantes, France, September 5–9, 2021, Proceedings, Part I (eds Dolgui, A. et al.) 258–266 (Springer, 2021).
Chapter  Google Scholar 
T. Ziarnetzky, N. B. Kacar, L. Monch, and R. Uzsoy, Simulation-based performance assessment of production planning formulations for semiconductor wafer fabrication. in 2015 Winter Simulation Conference (WSC), 2015, pp. 2884–2895.
Kacar, N. B., Monch, L. & Uzsoy, R. Planning wafer starts using nonlinear clearing functions: A large-scale experiment. IEEE Trans. Semicond. Manuf. 26(4), 602–612 (2013).
Article  Google Scholar 
Kacar, N. B., Irdem, D. F. & Uzsoy, R. An experimental comparison of production planning using clearing functions and iterative linear programming-simulation algorithms. IEEE Trans. Semicond. Manuf. 25(1), 104–117 (2012).
Article  Google Scholar 
Pürgstaller, P. & Missbauer, H. Rule-based vs. optimisation-based order release in workload control: A simulation study of a MTO manufacturer. Int. J. Prod. Econ. 140(2), 670–680 (2012).
Article  Google Scholar 
Haeussler, S. & Netzer, P. Comparison between rule- and optimization-based workload control concepts: A simulation optimization approach. Int. J. Prod. Res. 58(12), 3724–3743 (2020).
Article  Google Scholar 
Wight, O. Input/Output control a real handle on lead time. Prod. Invent. Manag. J. 11(3), 9–31 (1970).
Google Scholar 
Thürer, M., Stevenson, M. & Qu, T. Job sequencing and selection within workload control order release: An assessment by simulation. Int. J. Prod. Res. 54(4), 1061–1075 (2016).
Article  Google Scholar 
Land, M. J. & Gaalman, G. J. C. Workload control concepts in job shops. A critical assessment. Int. J. Prod. Econ. 46–47, 535–548 (1996).
Article  Google Scholar 
Day, G. S. The capabilities of market-driven Organizations. J. Mark. 58(4), 37 (1994).
Article  Google Scholar 
Dwivedi, A. et al. Addressing the challenges to sustainable initiatives in value chain flexibility: Implications for sustainable development goals. Glob. J. Flex. Syst. Manag. 22(S2), 179–197 (2021).
Article  Google Scholar 
Ming, L. T. Value chain flexibility with RFID: A case study of the octopus card. Int. J. Eng. Bus. Manag. 3, 3 (2011).
Article  Google Scholar 
Zhang, Q., Vonderembse, M. A. & Lim, J. S. Value chain flexibility: A dichotomy of competence and capability. Int. J. Prod. Res. 40(3), 561–583 (2002).
MATH  Article  Google Scholar 
Moreira, M. R. A. & Alves, R. A. F. S. A methodology for planning and controlling workload in a job-shop: A four-way decision-making problem. Int. J. Prod. Res. 47(10), 2805–2821 (2009).
MATH  Article  Google Scholar 
Bergamaschi, D., Cigolini, R., Perona, M. & Portioli, A. Order review and release strategies in a job shop environment: A review and a classification. Int. J. Prod. Res. 35(2), 399–420 (1997).
MATH  Article  Google Scholar 
G. Marangoni, G. Romagnoli, and F. Zammori, “Multiple Value Stream Mapping : How to implement Work Load Control in complex systems,” in IESM’2013, International Conference on Industrial Engineering and Systems Management, 2013.
Mezzogori, D., Romagnoli, G. & Zammori, F. Defining accurate delivery dates in make to order job-shops managed by workload control. Flex. Serv. Manuf. J. 33(4), 956–991 (2021).
Article  Google Scholar 
Wiendahl, H.-P. Load-Oriented Manufacturing Control (Springer, 1995).
Book  Google Scholar 
Bechte, W. Theory and practice of load-oriented manufacturing control. Int. J. Prod. Res. 26(3), 375–395 (1988).
Article  Google Scholar 
Land, M. J. & Gaalman, G. J. C. The performance of workload control concepts in job shops: Improving the release method. Int. J. Prod. Econ. 56–7, 347–364 (1998).
Article  Google Scholar 
Cigolini, R. & Portioli-Staudacher, A. An experimental investigation on workload limiting methods within ORR policies in a job shop environment. Prod. Plan. Control 13(7), 602–613 (2002).
Article  Google Scholar 
Yan, H., Stevenson, M., Hendry, L. C. & Land, M. J. Load-Oriented Order Release (LOOR) revisited: Bringing it back to the state of the art. Prod. Plan. Control 27(13), 1078–1091 (2016).
Article  Google Scholar 
Stevenson, M. Refining a workload control (WLC) concept: A case study. Int. J. Prod. Res. 44(4), 767–790 (2006).
Article  Google Scholar 
Thürer, M. & Stevenson, M. Workload control in job shops with re-entrant flows: An assessment by simulation. Int. J. Prod. Res. 54(17), 5136–5150 (2016).
Article  Google Scholar 
van Ooijen, H. P. G. & Bertrand, J. W. M. Economic due-date setting in job-shops based on routing and workload dependent flow time distribution functions. Int. J. Prod. Econ. 74(1–3), 261–268 (2001).
Article  Google Scholar 
Chiang, T. C. & Fu, L. C. Using dispatching rules for job shop scheduling with due date-based objectives. Int. J. Prod. Res. 45(14), 3245–3262 (2007).
ADS  MATH  Article  Google Scholar 
Hutter, T., Haeussler, S. & Missbauer, H. Successful implementation of an order release mechanism based on workload control: A case study of a make-to-stock manufacturer. Int. J. Prod. Res. 56(4), 1565–1580 (2018).
Article  Google Scholar 
Land, M. J., Stevenson, M. & Thürer, M. Integrating load-based order release and priority dispatching. Int. J. Prod. Res. 52(4), 1059–1073 (2014).
Article  Google Scholar 
Kundu, K. & Portioli-Staudacher, A. Investigation of effectiveness of order review and release models in make to order supply chain. MATEC Web Conf. 81(06003), 06003 (2016).
Article  Google Scholar 
Kundu, K., Land, M. J., Portioli-Staudacher, A. & Bokhorst, J. A. C. Order review and release in make-to-order flow shops: Analysis and design of new methods. Flex. Serv. Manuf. J. 33(3), 750–782 (2021).
Article  Google Scholar 
Renna, P. Allocation improvement policies to reduce process time based on workload evaluation in job shop manufacturing systems. Int. J. Ind. Eng. Comput. 8, 373–384 (2017).
Google Scholar 
Thürer, M. et al. Lean control for make-to-order companies: Integrating customer enquiry management and order release. Prod. Oper. Manag. 23(3), 463–476 (2014).
Article  Google Scholar 
Chen, J. C., Chen, T. L., Pratama, B. R. & Tu, Q. F. Capacity planning with ant colony optimization for TFT-LCD array manufacturing. J. Intell. Manuf. 29(8), 1695–1713 (2018).
Article  Google Scholar 
Huang, Y. Information architecture for effective workload control: An insight from a successful implementation. Prod. Plan. Control 28(5), 351–366 (2017).
CAS  Article  Google Scholar 
Dumetz, L. et al. A simulation framework for the evaluation of production planning and order management strategies in the sawmilling industry. IFAC-PapersOnLine 28(3), 622–627 (2015).
Article  Google Scholar 
Fu, M. C., Herrmann, J. W. & Narayanaswamy, M. Setting thresholds for periodic order release. J. Intell. Manuf. 8(5), 369–383 (1997).
Article  Google Scholar 
Asmundsson, J., Rardin, R. L., Turkseven, C. H. & Uzsoy, R. Production planning with resources subject to congestion. Nav. Res. Logist. 56(2), 142–157 (2009).
MathSciNet  MATH  Article  Google Scholar 
J. Liu, C. Li, F. Yang, H. Wan, and R. Uzsoy, Production planning for semiconductor manufacturing via simulation optimization, Proc. 2011 Winter Simul. Conf., pp. 3617–3627, 2011.
M. Li, A Metamodeling-Based Approach for Production Planning, Proc. 2014 Winter Simul. Conf., pp. 2204–2215, 2014.
W. J. Stevenson, Operations management, 10th Editi. Milan, Italy.: McGraw-Hill/Irwin, 2009.
Zammori, F., Braglia, M. & Castellano, D. Just-in-time parts feeding policies for paced assembly lines: Possible solutions for highly constrained layouts. Int. Trans. Oper. Res. 23(4), 691–724 (2016).
MathSciNet  Article  Google Scholar 
Bottani, E., Bertolini, M., Rizzi, A. & Romagnoli, G. Monitoring on-shelf availability, out-of-stock and product freshness through RFID in the fresh food supply chain. Int. J. RF Technol. 8(1–2), 33–55 (2017).
Article  Google Scholar 
T. Gruen and D. Corsten, “A Comprehensive Guide to Retail Out-of-Stock Reduction in the Fast-Moving Consumer Goods Industry,” 2007.
Thürer, M., Stevenson, M., Land, M. J. & Fredendall, L. D. On the combined effect of due date setting, order release, and output control: An assessment by simulation. Int. J. Prod. Res. 57(6), 1741–1755 (2019).
Article  Google Scholar 
Thürer, M., Stevenson, M., Silva, C., Land, M. J. & Fredendall, L. D. Workload control and order release: A lean solution for make-to-order companies. Prod. Oper. Manag. 21(5), 939–953 (2012).
Article  Google Scholar 
Download references
Department of Engineering “Enzo Ferrari”, University of Modena and Reggio Emilia, Via P. Vivarelli, 10, 41125, Modena, MO, Italy
Davide Mezzogori
Department of Engineering and Architecture, University of Parma, Viale delle Scienze, 181/A, 43124, Parma, PR, Italy
Giovanni Romagnoli & Francesco Zammori
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
G.R. mostly wrote “Introduction” to “Performance assessment of a WLC system” sections and prepared Table 1, D.M. mostly wrote “A proposal for an economic evaluation of WLC systems” and “Performance assessment of a WLC system” sections and prepared Table 2 and Fig. 1, F.Z. prepared and run the simulations, prepared all other figures and tables, and mostly wrote “Performance assessment in monetary terms” section. All authors wrote the “conclusions” section and reviewed the manuscript.
Correspondence to Giovanni Romagnoli.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Mezzogori, D., Romagnoli, G. & Zammori, F. A new perspective on Workload Control by measuring operating performances through an economic valorization. Sci Rep 12, 14599 (2022). https://doi.org/10.1038/s41598-022-17968-5
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-17968-5
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Advanced search
Scientific Reports (Sci Rep) ISSN 2045-2322 (online)
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

source

Phyllo Without the Fuss: Flaky Pastry Recipes Anyone Can Master – The Wall Street Journal

This copy is for your personal, non-commercial use only. Distribution and use of this material are governed by our Subscriber Agreement and by copyright law. For non-personal use or to order multiple copies, please contact Dow Jones Reprints at 1-800-843-0008 or visit www.djreprints.com.
https://www.wsj.com/articles/phyllo-dough-recipes-flaky-pastry-recipes-anyone-can-master-11661451737
Listen to article
(3 minutes)

RECENTLY, A WELL-MEANING person recommended Sharon Brenner’s “A Pie Project”—a digital cookbook devoted solely to Greek pies—specifically, the part where I could learn how to make phyllo dough from scratch.
But I’ve always found the store-bought frozen sheets difficult enough to maneuver. That’s what I needed to learn how to do. You might want to do the same, because frozen phyllo can be one of the handiest ingredients to stock in your kitchen. It contains multitudes of one-pan recipes.
Continue reading your article with
a WSJ membership
WSJ Membership
Customer Service
Tools & Features
Ads
More
Dow Jones Products
WSJ Membership
Customer Service
Tools & Features
Ads
More
Copyright ©2022 Dow Jones & Company, Inc. All Rights Reserved
This copy is for your personal, non-commercial use only. Distribution and use of this material are governed by our Subscriber Agreement and by copyright law. For non-personal use or to order multiple copies, please contact Dow Jones Reprints at 1-800-843-0008 or visit www.djreprints.com.

source

Materials for Matadors — Helpful Resources at the University Library – California State University, Northridge

Students study and chat with one another in front of the Freudian Sip on the Main Floor. Photo by Lee Choo, 2019.
Student uses equipment in the Audio Recording Studio to record and edit a project. Photo by Lee Choo, 2019.
Creative Maker Studio guests take advantage of the instruments and other equipment available to record music. Photo by Lee Choo, 2019.
Two 3D printers in the process of creating new models at the Creative Maker Studio. Photo by Lee Choo, 2019.
A group of students relax and study at a few of the lounge areas in the University Library. Photo by Lee Choo, 2019.
Whether you’re a brand new Matador or returning student, you’ll want to become familiar with all the University Library has to offer. Need a quiet place to study? Or someplace you can meet with a group to discuss a project? Do you need some audio equipment for an assignment? A laptop? A sewing machine? A cup of coffee? All of these things are available for CSUN students, all under one roof. 
Brianna Limas is the new outreach librarian in the Research, Instruction and Outreach (RIOS) Department of the University Library. She focuses on making resources available to the community and organizes library tours and programs. She also writes for the library’s blog, “Cited at the Library”, to help promote useful services and events. Limas said libraries have evolved a great deal from what we might have all experienced in the past.
“No one really gets “shushed” in the library these days… at least not on the first or second floors,” she said. “At the library we really want to invite the community to come in and just be present and engaged,” she explained. “As the semester gets going, I hope folks across campus feel welcome to stop by, grab a coffee and have a conversation; you can see what’s going on in the Learning Commons, check out the book displays, or talk to a librarian at the Reference Desk. We’re here to help!”
Limas said she wants students to know that the library can help support their needs.
“The Library is a place where conversations about equity and accessibility are constantly happening and always relevant; those values are really central to the field of librarianship.”
So what’s she looking forward to discovering about her new workplace?
“I’m excited to plan events and gatherings in the AS/RS (automated storage and retrieval system) viewing room and attend workshops in the Creative Maker Studio. The Map Collection is very cool, also. I have a checklist of places in the library that I’m excited to visit more often: the Gohstand Leisure Reading Room, the Music & Media and Teacher Curriculum Center, the Special Collections & Archives and the Library Exhibit Gallery are definitely top of my list of places of interest in the University Library.”
If you haven’t been to the University Library yet or if it’s been a while, here’s a roundup of some key information:
Hours
Study Rooms
To reserve a study room, visit https://csun.libcal.com/.
Laptop, Tablet & Device Checkout
Lab Printing
Creative Maker Studio
The Creative Maker Studio, previously known as The Creative Media Studio, will have some new additions soon that will include sewing machines, laser cutters, vinyl cutters, virtual reality and more. Right now, there’s a variety of other equipment available to students.
There will also be some important changes to the University Library’s Course Reserves (which are class materials, such as textbooks, that can be reserved for courses taken at CSUN), Periodicals and Microfilm (RPM) Collections according to the library’s website. They will be moved from the fourth floor, East Wing to the Main Floor.
To learn more about the University Library’s Learning Commons, visit https://library.csun.edu/learning-commons.
Some features of the library that were closed from the pandemic will reopen this Fall semester, as well.
Follow the University Library @CSUNLIBRARY and the Creative Maker Studio @CSUN_CMS on Instagram to keep up with the latest news!
, ,
CSU Leader
CSYou
CSU News
California State University Northridge President Dr. Erika D. Beck: Five Things You Need To Be A Highly Effective Leader During Uncertain & Turbulent Times

Dealers at CSUN’s Electric Car Show
What is critical race theory? Professor Theresa Montaño explains
Five athletes from Crook County High School ink letters of intent

Several area standouts make college choices

USC WOMEN MAINTAIN TOP SPOT UNANIMOUSLY IN CWPA WEEK 13 POLLS
Get the full Currents experience
California State University, Northridge Seal California State University, Northridge
University Advancement
Marketing and Communications
18111 Nordhoff Street, Northridge, CA 91330
Phone: (818) 677-2130 / Contact Us

source

Watch tonight's U21 game against Brighton live | News – Arsenal.com

This menu is keyboard accessible. To open a menu item’s submenu, press the space bar. To close a submenu press the escape key.
Off the back of a 4-1 win against Chelsea last weekend, the next challenge for our Under-21s is Brighton away tonight, and you can watch all the action live right here on Arsenal.com and the official app.
We’ll be looking to continue our 100 per cent winning start to this Premier League 2 season and make it three wins out of three against a Brighton side currently sitting 11th in the table and yet to record a win. 
The game kicks off at 7pm (UK) and can be watched for free on our official site and app.
If watching on the app, please ensure you’ve updated the latest version – iOS / Android
Copyright 2022 The Arsenal Football Club plc. Permission to use quotations from this article is granted subject to appropriate credit being given to www.arsenal.com as the source.
 
 
MEN
WOMEN
ACADEMY
CLUB
 
 
MEN
WOMEN
ACADEMY
 
 
 
 
MEN
WOMEN
ACADEMY
 
 
 
MEN
WOMEN
ACADEMY
 

Membership 2022/23 image of emile smith-rowe

Always be ahead of the game


Always be ahead of the game
 
Arsenal Football Club
Highbury House
75 Drayton Park
London, N5 1BU
Telephone Number
020 7619 5000
Explore our Help Centre for answers to common questions
For all other enquiries please use our New Enquiry form
Website feedback? Fill in our form
Check out our exclusive Wallpapers for desktop and mobile today!

source

Boston producers hit the surf for a 'Beats on the Beach' Block Party – Vanyaland

Rilla Force is making sure Boston squeezes some final summer “feels” out of August in more ways that one. Fresh off the release of his new electronic banger “FEELS” (out today, August 26), the producer has also co-organized the Beats on the Beach Block Party, a beatmaker-focused event taking over Dorchester’s Malibu Beach tomorrow (August 27).
The all-afternoon affair is a celebration of the third annual Beats on the Beach competition, which challenges local producers to create their own music using sample packs of ocean-adjacent sounds. Beats on the Beach began in 2020 as a project of Save the Harbor/Save the Bay, a local non-profit that is “committed to making Boston Harbor, the Islands, our beaches, and our programs inclusive, equitable, diverse, and accessible for everyone and anyone, knowing that racism and oppressive systems have prevented that from becoming a reality.”
This year’s block party transforms the competition into a free community event, featuring fresh eats from The Pull-Up, dragon boat rides from Ohana New England, and performances from Dephrase, Lightfoot, Leo The Kind, LDER, ximena, 1800shortking, The Hip-Hop Transformation, and Rilla Force himself.
“Maya [Smith] from Save the Harbor and LDER came up with the original concept for Beats on the Beach in the early stages,” Rilla explains. “The first year LDER and myself [pictured above] were featured producers for the competition — that meant we made beats using samples collected from local beaches around Massachusetts. We would use those beats as promotion material and inspiration for other producers to enter the competition.”
The year, competitors used similar sample packs of splashes, boardwalk footsteps, and crunching pebbles collected by Dephrase and Lightfoot. The 2022 first place winner will walk away with Izotope’s Music Production Suite, a cash prize, and the opportunity to have Leo The Kind evolve their beat into a full song.
Most notably, the block party spotlights electronic and lo-fi musicians in an unlikely location: An outdoor all-ages space in broad daylight, as opposed to late night clubs and bars where casual music fans might not stumble upon their set. The presence of producers on Malibu Beach tomorrow will send a clear message: Beats — and Massachusetts beaches — are for everyone.
Grab all the details for tomorrow’s event in the flyer below.
***

source

Technological and Creative Innovation to Be Celebrated at AES New York 2022 – rAVe [PUBS]


There are technologies now so foundational that they are indelibly integrated into audio production, and individuals so influential that they permanently advance the creative application of audio technology. Included in the AES New York 2022 Convention’s two full days of comprehensive sessions on October 19–20 are celebrations of such contributions to the audio sciences alongside the exploration of the latest technologies and the ideas of the latest generation of innovators.
50 years ago, the concept of a parametric equalizer was introduced at an AES Convention in a paper authored and presented by George Massenburg, now an AES Fellow and Gold Medal awardee. At AES New York 2022, Massenburg will return full circle for the golden anniversary of this seminal and now ubiquitous technology, discussing his coining of the term “parametric” and the experimentation and collaboration of individuals who contributed to the development of sweep-tunable EQ.
Fundamental technologies can be built upon, even generations after their introduction. In the AES New York Convention workshop “Applications and impact of the parametric EQ on the 50th anniversary of its invention,” Massenburg and other innovative engineers will review the established application archetypes for parametric and sub-band (“graphic”) equalization and explore creative applications of EQ.
Continuing the creativity theme, the AES New York session “Celebrating Al Schmitt” will recognize the enormous contributions to the art of audio production by this beloved producer, engineer and mentor. An AES Fellow, the late, great Schmitt’s seven decades of award-winning and excellence-defining recordings have inspired and led the way for thousands of today’s audio professionals, while entertaining millions. The celebration, led by Elliot Scheiner, will include contributions from additional friends and collaborators of Schmitt’s, including Frank Filipetti, Chuck Ainlay, Niko Bolas, Dana Dowd, Paula Salvatore and George Massenburg.
“One of the greatest aspects of the AES is the opportunity to meet and learn from the amazingly inspiring pioneers of our industry,” says Jonathan Wyner, AES Past President and Chair of the AES New York 2022 Convention. “The parametric EQ is something we take for granted, but we shouldn’t lose sight of its impact. It changed recorded music forever – and so did Al Schmitt, who set a standard for what recorded music could sound like.”
“Discover More” at the 153rd AES New York 2022 Convention. The ultimate experience begins in NYC with the return of the unparalleled interaction of an in-person Convention on October 19–20 (with additional training opportunities on October 18 and Tech Tours and Networking events on October 21). Then, on October 26–27, the online event will bring its own separately curated program of workshops and papers to a world-wide audience.
AES New York 2022 event partners include Dell, IMES (Iron Mountain Entertainment Services) and Qualcomm. The Convention will once again be collocated with NAB Show New York with a shared exhibits space. Exhibits+ registration, giving access to the in-person exhibition floor and related sessions, is free during the Early Bird period, while full technical program registration for the in-person or online components and All Access bundles are available at Early Bird pricing through August 31 at AESShow.com.

source

Witness: R. Kelly manager threatened her over stolen video – Scott County Times


You are currently in standard theme
You are currently in flex theme


CHICAGO (AP) — A former girlfriend of R. Kelly wept on the witness stand Thursday as she testified that a Kelly business manager told her in 2007 she should have been killed for causing the R&B star so much trouble by stealing a video from a gym bag full of recordings of Kelly having sex with women and girls.
Prosecution witness Lisa Van Allen said she rummaged through the bag on a rare occasion when Kelly left it unattended at a studio one day in 2000. She said she then watched the videos one after the other on a VHS player. She took one that, among other footage, showed Van Allen, Kelly and a younger girl who testified against Kelly last week under the pseudonym, “Jane,” having sex.
Van Allen, 42, is the only witness so far to have testified both at Kelly’s ongoing federal trial as well as at his 2008 state child pornography trial, at which Kelly was acquitted.
Kelly, who rose from poverty on Chicago’s South Side to become a superstar singer, faces charges in his hometown of child pornography and enticement of minors for sex. The 55-year-old and co-defendant Derrel McDavid, the former business manager, are also charged with rigging the 2008 trial by threatening witnesses and concealing video evidence.
Kelly was handed a 30-year prison sentence by a federal judge in New York in June for convictions on racketeering and sex trafficking charges. If convicted in U.S. District Court in Chicago, he could see years added to that sentence.


Van Allen, crying and reaching for tissues during her testimony Wednesday, said it was McDavid who told her in 2007 at a Chicago lawyer’s office that a polygraph had indicated she wasn’t truthful about the video she handed back. Kelly and his insiders were worried Van Allen had made other copies.
“He said that I failed (the lie-detector), and that they should have murked me from the beginning,” she testified, using a slang word for killed. She said she took the comment as a threat.
Van Allen sounded shaken, too, while recalling McDavid’s response to her when she told him she was going to tell Kelly about McDavid’s threat.
“He said (Kelly) knew everything that was going on,” she said.
Kelly’s 2008 trial revolved a around a different video that state prosecutors said showed Kelly abusing the girl called Jane at the Chicago federal trial. After acquitting Kelly in 2008, jurors said they had no choice because the girl did not take the witness stand at that trial. Last week, Jane did testify that she was the child in the video and Kelly was the adult man. The evidence at the current trial includes several videos.


Van Allen, who said she began a nine-year relationship with Kelly in 1998 when she was 18, said Kelly was obsessed with control, prohibiting her from speaking to other men and other men from speaking to her. She told jurors Kelly would sometimes hit her because, as she put it, “I wouldn’t listen to daddy.”
She testified she only learned after Kelly filmed himself having sex with Van Allen and Jane that Jane had only been 14 at that time.
Asked by a prosecutor how she felt as she viewed the videos at the studio in 2000, Van Allen responded, “Disgusted.” She also recalled being nervous Kelly might walk back into the room at any moment, knowing he’d be furious if he saw what she was doing.
The same video she took from Kelly also had footage of Kelly sexually abusing Jane at two different locations, Van Allen testified. She said she took the tape because she never wanted Kelly or anyone else to see it. She said she decided in 2007 to return the tape she had taken and that, while she insisted she didn’t pressure Kelly for money, he offered to pay $250,000 for it.
In cross examination, a defense attorney for McDavid, Beau Brindley, asked Van Allen that if her goal was to prevent anyone from ever seeing it, why didn’t she simply destroy it in 2000. She answered, “I could have if that crossed my mind.”


Brindley sought to cast doubts about her account that McDavid threatened her. His voice soaring, Brindley asked Van Allen if she was “prepared to admit” that her claim McDavid made a death threat “is a lie?”
“I am not prepared to admit that,” she shot back.
He asked her if she ever had any indication McDavid was “a murderous accountant” prior to their 2007 conversation about the lie-detector test.
“Not until he said they should have murked (killed) me,” she answered.
___


Follow Michael Tarm on Twitter at https://twitter.com/mtarm and find AP’s full coverage of the R. Kelly trial at https://apnews.com/hub/r-kelly.
Copyright 2022 The Associated Press. All rights reserved. This material may not be published, broadcast, rewritten or redistributed without permission.
Click here to view this author’s last article or here to see all of their content.

Click here to see all E-editions

Realtime Radar
Scattered showers and thunderstorms before 7pm. Partly cloudy, with a low around 71. South southeast wind 0 to 5 mph. Chance of precipitation is 30%. New rainfall amounts between a tenth and quarter of an inch possible.
Hourly Forecast
7-Day Forecast
Based on data from National Weather Service and OpenWeather.


$10 per thousand reads up to $50 per post.
Neighbors $10 per thousand reads up to $50 per post.
News $30 per thousand reads up to $200 per post.
Start Posting

User Help/Support Page
The Scott County Times
311 Smith Ave.
Forest, MS 39074
Phone: (601)-469-2561
Email:
[email protected]
© Copyright 2022 The Scott County Times, 311 Smith Ave.- Forest, MS 39074  | Terms of Use | Privacy Policy

source

Solid State Logic Continues Expansion With Latest Plug-In, X-Limit – Live Design

source

‹ Previous Next ›