Blog

bergenPAC Announces Performing Arts School Fall Classes – Broadway World

Get local news, offers & more…
The Performing Arts School (PAS) at bergenPAC located at 1 Depot Square in Englewood, is considered the premier arts school in Bergen County and northern New Jersey. PAS offers a variety of classes in Early Childhood, Music, Dance, and Theater throughout the year and are now accepting registrations for fall classes which are set to begin on Monday, September 12. There is a 10% early bird discount for registrants who are paid in full by September 8. PAS will host an open house on September 7 and 8 from 10:30 a.m.- 7:30 p.m. for an introduction to PAS’s wide range of arts education programs. To view the Open House schedule, please click here.
PAS tuition-based arts education programs provide students with unique and “hands-on” arts training by industry professionals that allow them to gain real world experience and enhance academic achievement through the arts as well as opportunities to perform on bergenPAC’s main stage and throughout Bergen County. bergenPAC’s arts education initiatives occur on-site at the Performing Arts School building at 1 Depot Square, Englewood, NJ.
Powered by Benzel Busch, PAS at bergenPAC’s comprehensive early childhood program serves the youngest student population. Children 3 months to 5 years of age can enjoy their very first exposure to music, dance, and theater. These classes will be the beginning of their journey at The Performing Arts School and lay the foundation to create lifelong learners of the arts. The 12-week fall session takes place from September 12 – December 4, 2022. For more information about Early Childhood programs and its benefits on young children, please click here.
The Dance Program at The Performing Arts School at bergenPAC is an electrifying program under the direction of world-renowned dancer and choreograher Roberta Mathes. With stellar professional faculty and facilities, this dance program has had resounding success in reaching children and members of the community, providing the opportunity to receive superb dance training in a positive setting whether they become performing artists or simply dance for fun.
PAS offers a wide array of classes for all ages and abilities (children through adults) in Classical Ballet, Contemporary, Modern Jazz, Horton, Afro Modern, Tap, Hip-Hop, and Acrobatics.
For more serious-minded students, the PAS has a pre-Professional program which offers college guidance for dancers and provides more performance opportunities. To learn more about these dance programs and to register, please click here.
bergenPAC’s regional theater school offers weekly classes for all ages in the dramatic arts and musical theater as well as college and audition preparation for aspiring actors continuing their education. bergenPAC also presents theatrical productions throughout the year on an audition basis. Children of all ages and abilities can enroll in classes such as Acting and Improv, Acting Technique, Scene Study, and more, as well as the opportunity to perform in a production of “Willy Wonka Junior.” The Showtime Jr. program requires an audition for placement. For information about all of PAS Theater classes and registration, please click here.
Powered by Benzel Busch, the PAS music program is rooted in the history of the facility, which formerly housed GRAMMY-winning Bennett Studios. Students are encouraged to take private music lessons while also taking group classes and jam sessions to create a music community. All students are given the opportunity to record their pieces. The curriculum is tailored to the individual instrument and educational needs of the student and focuses on building technical skills as a foundation for performance.
The music program includes the prestigious Young Professionals Vocal Academy at bergenPAC. For over two decades, Amelia DeMayo has been operating a vocal technique program for professional youth; specifically those wishing to pursue a career in musical theatre or classical performance, as well as various forms of media for over 20 years. While her studio is in New York City, she has satellite locations in New Jersey and Westchester, NY, and her student base reaches from coast to coast.
Together with her skilled co-teachers Liliana Sotirova, Gulnara Mitzanova, and Glenn Gordon, Amelia focuses on children aged five through college, preparing young singers using a holistic approach. Focus is on vocal technique, body alignment, breathing, intonation, diction, expression, and building repertoire. Both the recreational singer and those on a professional track are mentored and given career guidance to reach their full potential as a vocal performer.
Instruction is not limited to young children; her musical theatre and classical students have been accepted into the most prestigious pre-college, college, and conservatory programs, including NYU’s Tisch School of Performing Arts, The Manhattan School of Music, and The Royal Conservatoire of Scotland, to name a few. They have also won innumerable international competitions and perform locally in community theatre and at sports venues in the tri-state area.
Amelia’s students (both current and graduates) have appeared, and appear in, countless theatrical productions on Broadway, regional theatre and national tours, including current Broadway productions of Dear Evan Hansen, School of Rock, Kinky Boots, Once On This Island, and A Bronx Tale. Former Broadway productions include Annie, Matilda, On Your Feet, Fiddler on the Roof, Newsies, and Billy Elliot, and too many more to list. Her students are also actively engaged in voice-over work, appear on national commercials and television series, and have also been featured on studio album recordings.
With these top-notch leaders at the helm, the PAS has a proven track record of developing young artists to stardom. Many of its students go on to professional careers and return to teach at the school.
Another flagship music program is the Performing Arts School Show Choir. Students in The Performing Arts School Show Choir will build confidence through performing in an advanced ensemble. Students will be auditioned for this ensemble. They will learn proper posture, breathing, and proper diction. Students will perfect their rhythm, sight-singing, and ear training skills. This ensemble will learn a vast majority of repertoire, while also preparing to perform alongside major artists on the Taub Stage at bergenPAC.
Music programs also include private lessons, music production on Logic and Pro Tools, and the Pop Rock Ensemble. For more information and to register, please click here.
The PAS at bergenPAC also offers high school students the opportunity to earn college credit through the Dual Enrollment Program at Bergen Community College. High school juniors and seniors can receive college credit for just $73.25 per credit plus a one-time registration fee of $15.25. There are currently six classes at The Performing Arts School at bergenPAC where students can receive college credit from Bergen Community College, including The Performing Arts School Show Chorus, Advanced Jazz Dance, Teen Acting Technique, Summer Musical, Private Voice Lessons, and Private Piano Lessons. These college credits are transferable to many colleges in the state of New Jersey. For further instructions and to apply, please click here.
As part of bergenPAC’s mission to provide accessible experiences for diverse populations and to strengthen the role of arts education in the northern New Jersey region, the Performing Arts School at bergenPAC provides scholarship opportunities for students who because of financial limitations are unable to participate in our performing arts programs.
The school’s scholarship opportunities come in the form of full and partial scholarships to our tuition-based programs. A limited number of scholarships are available each year to those who meet the requirements. All information is confidential and brought before a bergenPAC committee. No child is turned away from these programs because of their inability to pay. The Scholarship Program is made possible through donations from generous bergenPAC supporters. To apply, please click here.
New PAS programs are planning to be launched in the fall including High School Musical Awards, and a Young Professionals Training program. PAS continues to raise the bar for performing arts schools.
“Our mission is inclusivity and accessibility with scholarships, special needs, and outreach,” Alexander Diaz, PAS Director of Education and Outreach explains, “We have community partnerships and outreach programs, such as the School Time series, co-productions, in school residencies and in school assembly programs. We also tie into social issues, mental health issues and food insecurity issues through the arts.”
All classes will be held at the Performing Arts School located on 1 Depot Square in Englewood, NJ. To register for fall classes, please call 201-482-8194 ext. 78 or email [email protected], or you can register online here.
Learn more about the School’s arts education programs here https://www.bergenpac.org/education-1/education or make a tax-deductible donation to support the scholarship fund https://www.bergenpac.org/support-bergenpac/donate. The bergenPAC theater is currently undergoing construction that should be completed in Fall 2022. It will include Capital Campaign improvements to the PAS studios. To learn more about bergenPAC’s Capital Campaign, please visit https://bergenpaccapitalcampaign.com/
Centenary Stage Company Launches 2022-23 Season With LAUREL CANYON: A TRIBUTE TO CROSBY, STILLS, NASH & YOUNG
Ocean Grove Camp Meeting Association Presents HOLIDAY ENCORES: RADIO WAVES! ECHOES OF YESTERYEAR!
New Abstract Art Exhibition By Maplewood-Based Artist Aida Jones On Display At South Orange Performing Arts Center
Dance on the Lawn to Return with Performances by Forces of Nature, Nai-Ni Chen & Company, and More
Hot stories

Erika Henningsen Will Lead World Premiere of New Musical JOY Opening in December at George Photo

Erika Henningsen Will Lead World Premiere of New Musical JOY Opening in December at George Street Playhouse

Buy Tickets Now For CHESS At Surflight Theatre Photo

Buy Tickets Now For CHESS At Surflight Theatre

Interview: Constantine Maroulis of FOREIGNERS JOURNEY at Axelrod PAC Photo

Interview: Constantine Maroulis of FOREIGNERS JOURNEY at Axelrod PAC

Algonquin Arts Theatre Announces 2022-2023 Concert Series Featuring Tributes to Neil Young Photo

Algonquin Arts Theatre Announces 2022-2023 Concert Series Featuring Tributes to Neil Young, Linda Ronstadt & More

Erika Henningsen Will Lead World Premiere of New Musical JOY Opening in December at George Street Playhouse
Buy Tickets Now For CHESS At Surflight Theatre
Interview: Constantine Maroulis of FOREIGNERS JOURNEY at Axelrod PAC
Algonquin Arts Theatre Announces 2022-2023 Concert Series Featuring Tributes to Neil Young, Linda Ronstadt & More
BroadwayWorld TV


TICKET CENTRAL

word game
Get Broadway’s #1 Newsletter

News + special offers for Broadway Shows

News + special offers for Broadway Shows

New Jersey SHOWS
Recommended for You


Get New Jersey News
Follow Us

BWW Sister Sites

Apps

source

Monroe City Council approves development of master plan to revitalize parks – KNOE

MONROE, La. (KNOE) – The Monroe City Council has given the green light to a plan to revitalize the city’s parks and community centers.
“We want to hear from the public,” Mayor Friday Ellis told KNOE. “That’s the whole goal is to get community input and let those drive whatever capital projects that we want to move within those parks.”
On August 23, the council approved a plan tasking a landscaping architecture firm with creating a master plan to renovate Charles Johnson, Chennault, and Forsythe Parks.
“With a master plan versus a study, you are actually going to get projects that come out of it and aligned funding sources to be able to achieve those goals,” Mayor Ellis explained.
In addition, the council also approved a plan for a different firm to complete an assessment of Monroe’s seven community centers.
“I want to hear what the kids have to say,” explained Ellis. “What I want in a rec center vs. what they want in a rec center, that’s who we need to be listening to. Oftentimes, they get overlooked. I also want to hear from our senior community. They are a vibrant part of our community centers.”
Ellis adds he wants community centers to be a hub of activity for people of all ages.
“What you saw on the agenda tonight was MCAL, which was on there to start doing some afterschool tutoring,” said Ellis. “We’re also talking with other early education providers in town to be able to expand their services within our rec center to expand seats in early childhood.”
The two agreements are expected to cost taxpayers around $350,000.
Copyright 2022 KNOE. All rights reserved.

source

How to Start a Podcast 2020: Podcasting for Beginners

The Best Free 808 Sample Packs: Thousands of Drum Kits, Samples, and Free Drum Sounds – Magnetic Magazine

Roland TR-808 (photo by Brandon Daniel)
If you're making hip-hop, rap, trap, drill music, or anything with a super-heavy low-end, 808 samples will be the best way to achieve what you're after. But buying new 808 sample packs can get incredibly expensive, especially when you're just starting out as a producer.
So if you just need to start making hard-hitting music, everything you need to get started is right here. These are some of the hardest-hitting kits available, and you'll get instant improvements to your beats within just a few minutes of using these packs.
You're welcome.
Need More Free Plugins For Vocal Processing? We Got You…
Choosing an 808 high-quality sample that works with your song is the most crucial first step. Most of what makes a knocking song is simply a correct sample selection. Always be on the lookout for clean samples with an excellent sustain that you can alter and change to suit your needs.
You also have the option to synthesize your own 808 samples out of synths like Serum or Deva. These give you a bit more control over your 808s, but take longer to dial in correctly and can easily take you out of the creative flow when you're in the studi0.
However you chose to get your 808s into your DAW, starting with a fantastic source sample is paramount. Not doing so will only cause problems in the mix, track, and your motivation later on.
Check Out This Comprehensive Bible Of Free Delay Plugins Right Here
Roland-TR-808
This collection of 300 drum samples from the classic TR-808 drum machine has been recorded directly to 1/4" analog tape via a Studer A80 Mk1 tape machine. Each sound in the collection features multiple saturation settings!
Snag These Samples Here
This pack contains a selection of our favorite samples from various Cymatics packs, perfect for trap production. You'll find top-quality melodies, drums, FX, and more inside. Records from artists such as Travis Scott, Young Thug, Lil Baby, Drake, and Lil Uzi have inspired me.
Snag These Samples Here
Adding your favorite synths and Nexus, you can make 808 heavy trap, hip hop, and future bass. Use these samples; however, you need to get knocking results that hit hard in the club.
Snag These Samples Here
When Cymatics made Orchid, they sat down and tried to think from the perspective of the music listener. This changed their entire approach to making melodies. They realized that the one thing the listener wants is to feel good when the music hits their ears. Each sample features an extensive range of applications, allowing you to mix and match them to create your unique sound. The possibilities are endless.
Snag These Samples Here
This pack contains 20 pre-produced 808s ready to be used in your tracks. They have been created with the producer in mind, so you won't need to spend time processing them to get the perfect sound.
Snag These Samples Here
We recorded 16 808 kits through an API console onto tape, using a variety of high-end hardware processors along the way. These are our best-sounding 808s yet. The kits feature clean, colored, and supersaturated 808 samples.
Sang These Samples Here
If you are familiar with hip-hop music, you have probably heard of 808 Mafia. This producer team is top-rated, and their beats are in high demand. If you want to produce music in the style of Lex Luger, Southside, and TM88, then you need to download this complete drum kit that includes 440 high-quality classic samples.
If you are looking for a complete and versatile drum bank full of modern and sharp sounds, this 808 Mafia Drum Kit is made for you!
Snag These Samples Here
808s are the heart of modern trap music, but they can be hard to find. With so many samples being reused and renamed, finding ones that will make your music stand out can be challenging. I've seen countless beats lose an artist's attention just because of a weak 808 drop.
This expansion pack of 808's was designed with the Oracle melody collection in mind. Every 808 samples were tweaked and polished to industry standard, given their personality to help your tracks stand out and hit way harder.
Snag These Samples Here
Goldbaby is a top-rated sample maker. He uses high-end equipment and retro lofi processing to create powerful sounds and unique textures. He has also loaded his website with many free sounds, including an 808 recorded through a cassette tape.
Snag These Samples Here
This library contains 50 key-labeled 808 bass samples produced with the Roland TR 808, Jomox MBase 01, and Elektron Analog Rytm. These samples were then processed with Elektron Analog Heat, which added analog distortion, filter, and EQ. If you're making Hip Hop, Trap, Pop, Future Bass, or EDM, these 808s will help you to add extra low-end to your mixes!
Snag These Samples Here
This free collection of sub-bass samples will get your beats moving the house and pounding in car stereos. It contains different bass variations to choose from to get that earth-shaking sound.
Snag These Samples Here
As one of the top leaders in the sample game, Sample Magic also provides a wide range of free sounds from classic machines, including the much-loved 808. There are 107 sounds available, so there is plenty to choose from on this special day.
Snag These Sounds Here
This sample pack contains 15 custom-made 808s that can be used in all your beats. The corresponding key for each 808 is included for easier use. Each 808 has been EQ'd and compressed, giving it a high-quality and trendy sound. Now you can provide the beats with the hard low-end you've been looking for.
Snag These Samples Here
As Pierre's beats typically feature heavy bass, this pack features similarly weighrty samples. They are all labeled so that you can quickly identify the key. In addition to the 808 shots, you will also find a decent selection of modern trap drums, including claps, cymbals, kicks, various percussion sounds and snares.
Snag These Samples Here
The 808 Drum Kit contains various drum samples to add to your repertoire. These include 808 Bass, Kicks, Snares, Hats, and Percussion (Claves, Congas, Toms, Cowbells, Maracas, Sticks). With such a versatile range of sounds available, this kit is perfect for any production style. So why not give it a go and see what you can create?
Snag These Samples Here
We are confident that you can download a library of 808 samples right now. The samples have been processed with various analog and digital effects. They are ready to be used in your productions immediately. The 808 samples are divided into two main folders: hits and loops.
The samples are provided as WAV files, so you can import them directly into your DAW or sampler. You can use the samples in your music in any way you like, as long as you don't distribute them.
Snag These Samples Here
From our Roland TR-808 drum machine, we bring you the 808 DRUMS, a free drum sample pack featuring over 200 one-shot drum samples, and + a BONUS of 10 Trap drum loops for making Trap, Hip-Hop, R&B, Pop, and House music.
In addition to the ten claps, 15 claves, 25 congas, 25 cymbals, 25 hats, 30 kicks, 50 snares, and 30 toms already at your disposal, you will also have access to 10 bonus drum loops. Over the past four years, eight sounds have significantly impacted many electronic musical styles (Dubstep, Trap, EDM). Used by many famous producers and artists in their music, this sound is essential for any producer's sound library.
Snag Them Here
This free drum kit contains some of the best trap 808s out there: full stop.
Snag These Samples Here
808 Vol. 1 is a new collection of high-quality 808 Bass Samples designed to give you an edge in your next Hip Hop production. Inspired by Travis Scott, Post Malone, Lil Nas X, J. Cole, Kodak Black & Offset, 808 Vol. 1 was built upon quality research of the 808s they use in their chart-topping hits. Surge Sounds' top priority is to provide the best 808 Bass Samples that will push your Hip Hop beats to the next level. 100% Royalty-Free, so you can sell your beats with these 808s.
Snag These Samples Here
This freebie from Samplephonics contains a selection of samples from their premium library, "Deep Trap." The full version includes 198 high-quality beat loops and samples in 24-bit.
Snag These Samples Here
If you're looking for that 808 bass sound in your music, look no further than SimplySounds and Hex Loops. Okay, sure, it's not a sample. It's a VST, but it's too dope not to include. This virtual bass module contains 36 tuned 808 bass sounds, all created using analog synthesizers, digital sine waves, guitar amps, and other top-of-the-line equipment.
Snag This Plugin Here
This Warm 808 Bass Samples pack contains 500 royalty-free music production ready 808 sounds, giving you everything you need to make smooth Hip Hop, Future Bass, Trap, and more. Get creative and go beyond by adding your favorite synths such as Nexus, Sylenth, or any other.
The sound of Warm 808's is inspired by artists such as OVO, Dreamville, Travis Scott, Metro Boomin, Lil Wayne, and many others. This pack of five hundred premium quality 808 bass samples makes it easy to find the perfect 808 sound for your music!
Snag These Samples Here
There are more than 95 drum samples in this pack, including 808s, kicks, snares, hats, pers, FXs, and Vox. Plus, there are extra drum loops included. All sounds are pre-mixed for your convenience! Just add them to your project and start creating some hot beats! Download this pack for FREE today.
Snag These Samples Here
Undoubtedly, Metro Boomin is one of the best beatmakers around. The Drip Kit contains 100 one-shots and tuned 808s inspired by his most successful productions.
Snag These Samples Here
Plenty of free sound kits, loop kits, and preset banks by The Producer's Plug. They also offer some exciting artist packs you might want to look closely at.
Snag These Samples Here
This drum kit includes high-quality drums, one-shots, and melodies that can be imported into your DAW.
According to The Kit Plug, this pack was created by Multi-Platinum Music Producers. All samples are in WAV format, which is compatible with every DAW.
This drum kit includes 15 808s, ten claps, five crashes, 20 FX, five open hats, 20 hi-hats, ten kicks, ten percs, ten snares, and ten loops.
Kyle Beats is a popular YouTuber who focuses on beat-making. Andromeda contains 95 high-quality sounds, including 808s, drums, real guitar loops, and vocal chants.
The DrumStart Volume 3 contains over 300+ loops and one-shots that can be used for Trap or R&B. To learn more about this product, click on the link and watch the demo on YouTube.
Make the samples you just downloaded hit harder by utilizing these three tricks in your mixdowns and compositions. Or check out these three powerful, game-changing 808 tutorials.
When picking an 808, think about its place in the key of your song. Tuning the 808 to the key of your music will help it sit better in the mix. A tuned 808 also works with the kick, bass, chords, and other melodic parts.
If you want your 808 to stand out, try layering a sharp top kick sample over it. But be careful not to overpower the kick with the bass – a good balance is critical. Getting both elements to work well together in the mix can be challenging.
If you don't treat low frequencies, your mix will sound weak, have less impact, and be quieter overall. In other words, masking or overlapping low frequencies causes problems.
And be sure to tighten up the ADSR envelopes on your 808s and kicks to complement each other instead of competing for the same place.
Be sure your 808s sound good on small speakers that can't reproduce lower frequencies, like earbuds, laptops, and phones. Harmonic enhancement techniques like distortion, saturation, and bit-crushing will give the 808 presence. It also adds character, warmth, edge, cohesion, and more. Multiband effects processing is the most effective way to apply distortion.
This technique, which involves splitting the frequency spectrum into independent and adjustable bands, allows you more control over isolated frequencies. It is commonly used in sound design, mixing, and mastering.
Managing Editor at Magnetic Magazine – Former Marketing Manager at the Hyperbits Masterclass – Writer, Content Strategist, Music Producer, and Record Label Manager 

source

AAP has audio recording of BJP's offer to Manish Sisodia, will release it when time comes: Sources | Mint – Mint

We have audio recording of BJP’s offer to Sisodia, will release it when time comes: AAP sources
The AAP has the audio recording of the BJP’s “offer” to Delhi Deputy Chief Minister Manish Sisodia that all cases against him will be dropped if he switched sides, AAP sources said on 22 August.
The Aam Aadmi Party (AAP) will make the audio recording public “when the time comes”, they added.
“We have the audio recording of the BJP’s offer and will make it public to expose the saffron party when the time comes,” one of the sources told PTI.
Delhi Deputy Chief Minister Manish Sisodia on Monday claimed that he was approached by the BJP with the offer to close all cases against him if he joined their party, while asserting that all the allegations against him were false, and that he will never bow down before “conspirators and corrupt people
AAP leaders backed Sisodia’s claims but neither they nor the deputy chief minister disclosed the name of the person from the BJP who had approached him with such offers.
The startling claims of Sisodia came days after his house was raided by the Central Bureau of Investigation (CBI) in connection with allegations of corruption in the implementation of the Delhi excise policy, even as the BJP MP from Northeast Delhi, Manoj Tiwari, asked the AAP leader to name the person who made these “offers” to him.
At a press conference, AAP national spokesperson and Rajya Sabha MP Sanjay Singh evaded a direct reply to a question on how Sisodia managed to record the BJP’s “offer” when the CBI had seized his mobile phone.
“Phone is the only medium? BJP leaders do not know what are the means they use to do such work? The BJP uses all sorts of tactics, tools and means such as phone, messengers, meetings for such work,” Singh said.
When the time comes, everything will be “disclosed”, he added.
“They (BJP) have done it (approached Sisodia). They are making their moves. We are also making our moves. Wait, we will disclose everything when the time comes,” Singh said. 
It is important to note that Manish Sisodia is among 15 people and entities named in an FIR registered by the Central Bureau of Investigation in connection with alleged irregularities in the implementation of the Delhi excise policy, as per news agency PTI report.
The AAP leader’s house was raided on Friday by the CBI over alleged corruption in the Delhi Excise Policy 2021-22. He has stressed that the case against him is an effort to stop the good work being done by CM Arvind Kejriwal-led dispensation and also to put obstacles in the path of the AAP chief who has emerged as an alternative to Prime Minister Narendra Modi.
Meanwhile, in another development, Delhi BJP on Monday staged a protest near Chief Minister Arvind Kejriwal’s residence in Civil Lines area here against the alleged irregularities in the AAP government’s excise policy. Attending the protest, Delhi BJP president Adesh Gupta said Kejriwal should expel Deputy Chief Minister Manish Sisodia from his Cabinet as he is “accused number one” in the case registered by the CBI. A probe is underway by the Central Bureau of Investigation (CBI) into the alleged irregularities in the Delhi government’s Excise Policy 2021-22.
(With inputs from agencies)
Download the Mint app and read premium stories
Log in to our website to save your bookmarks. It’ll just take a moment.
You are just one step away from creating your watchlist!
Oops! Looks like you have exceeded the limit to bookmark the image. Remove some to bookmark this image.
Your session has expired, please login again.
You are now subscribed to our newsletters. In case you can’t find any email from our side, please check the spam folder.
This is a subscriber only feature Subscribe Now to get daily updates on WhatsApp

source

Beat Building: how to make a Big Beat beat – MusicRadar

MusicRadar is supported by its audience. When you purchase through links on our site, we may earn an affiliate commission. Here’s why you can trust us.
By ( , ) published
Learn how to build big Big Beat beats in our Beat Building series of tutorials. Now that’s a tongue twister!
In our Beat Building series, we’re showing you how to produce beats, grooves and drum patterns in a variety of styles and genres, touching on various eras of production, to help you understand the key rhythmic elements behind many of today’s biggest tracks. 
Big beat music got mainstream in the late 1990s/early 2000s, with artists like The Chemical Brothers, Junkie XL, The Crystal Method, and of course Fatboy Slim – the genre is even named after a Brighton club night that he used to run. 
Big beat producers made full use of contemporary sampling technology, with breaks and other loops (often contained within an Akai S-series hardware sampler) playing alongside sampled vocals, and programmed beats, such as might be created on a Roland TR-909. 
Sample selection was everything, especially with the all-important breaks or beats that were the foundations of these new productions
As with hip-hop music previously, sample selection was everything, especially with the all-important breaks or beats that were the foundations of these new productions, and no vinyl stone was left unturned in the search, sometimes using quite unexpected material – see Fatboy Slim’s use of Ashes The Rain And I from 1970’s album James Gang Rides Again, for his hit Right Here, Right Now. 
The James Gang is Joe Walsh pre-Eagles, once again showing us that classic rock has some very usable intros and breaks – the most obvious examples must be Aerosmith’s Walk This Way, or Billy Squier’s The Big Beat… hmm, wonder if that’s where Fatboy Slim got his club name from?beatFirst thing you’ll need is a sampled DRUM BREAK; we’ve faked one here, using the Session Dry Kit in Ableton Live, assuming that an acoustic type beat would be the best source material. You can use one of the many breaks available from SampleRadar absolutely free. 
We won’t convert it to MIDI because we want to keep the flavour of the original beat, but we are slicing it in our software sampler, which is how such things were done back in the day (enable poly mode so it’ll play more than one drum hit at a time). Most soft samplers give you the option of slicing manually or automatically; you’ll need to work according to your chosen beat. 
We’ve kept most of the original pattern, but added a couple of kick drum hits at the end of the two-bar loop. We’re using a 135bpm tempo, right in the ballpark for this genre. Then it’s MIDI time. We’ve used a 909 KIT to add a beat and percussion to beef up the sample and add contrast. 
If you want a really heavy ‘1’, you could use a synth kick, so you can easily adjust the decay and emphasise that first beat in the pattern. We also have a hi-hat loop, not seen here, which is useful for pacy little breakdowns. These parts can be simple – sometimes all you need is that first kick in the bar, and a snare. 
We don’t worry about velocity or groove on the electronic beats, the sample conveys all of that. If it comes from vinyl, the original sample has ‘personality’ already, and we can keep the electronic beat clean-ish (we’ll add a tape simulator/
compressor plugin to the master track, to bind things together).
After building the drum pattern, we’ll add an acid-style bassline with some automation to keep it evolving, then maybe a guitar part. Finally effects, in the form of delays, reverbs, and the all-important tape sim/compression.
Future Music is the number one magazine for today’s producers. Packed with technique and technology we’ll help you make great new music. All-access artist interviews, in-depth gear reviews, essential production tutorials and much more. Every marvellous monthly edition features reliable reviews of the latest and greatest hardware and software technology and techniques, unparalleled advice, in-depth interviews, sensational free samples and so much more to improve the experience and outcome of your music-making.
Don’t miss the latest deals, news, reviews, features and tutorials
Thank you for signing up to Musicradar. You will receive a verification email shortly.
There was a problem. Please refresh the page and try again.
MusicRadar is part of Future plc, an international media group and leading digital publisher. Visit our corporate site (opens in new tab).
© Future Publishing Limited Quay House, The Ambury, Bath BA1 1UA. All rights reserved. England and Wales company registration number 2008885.

source

The last dance for Anthony Worden and the Illiterati was electric – Iowa Public Radio

It was definitely a bittersweet moment for me at 80/35 when Anthony Worden and his band rolled up to play at the IPR stage. They were our final band of the weekend, and the band only had two shows left in Iowa before Worden’s upcoming move to Kansas. The band’s final show was coming up in a week: Illiterati Fest, to be held at Gabe Oasis in Iowa City. The fest would feature an all-star lineup of Iowa musicians, including Joel Sires, The Host Country and Penny Peach.
As fate would have it, I was going to be in Iowa City the same night as Illiterati Fest. My family had purchased tickets to see Spoon (one of the greatest bands of all time) at the Englert Theatre. I told Anthony this, and he immediately reminded me that Gabe’s Oasis was just about a block down the street from the Englert and that his set wouldn’t begin until 11 p.m.
There was nothing left to do but shrug and say, “Well, I guess I’ll see you there!”
I made it to Gabe’s a little before 11 p.m., not long after the Spoon concert had ended. I hadn’t been there in several years, and all I really remembered was the stairs. Right as I entered, the first person I encountered was Anthony’s mother, whom I’d met a couple of times previously. She was wearing a Penny Peach shirt, and she asked “How was Spoon?” I replied that they were amazing, and she said: “Probably not as good as Penny Peach.”
The music had been going since 7, and I arrived as the band Dryad were wrapping up their set on the lower floor. Gabe’s sometimes hosts music on both their lower and upper floors, so while Dryad was playing downstairs, Anthony and his band were getting ready upstairs, and were able to begin within minutes of the end of Dryad’s set.
The crowd was electric, and Worden and the band sounded as good as I’ve ever heard them.
This version of the Illiterati featured Lucas Adolphson of Halfloves on bass, in addition to Worden’s regular bandmates Aaron Knight (drums) and Avery Moss (keyboardist/synthmaster). I have to confess I didn’t recognize Knight, but Worden later assured me that “he is always doing new haircuts,” so it’s hard to recognize him. The band was joined for their final two songs by Elly Hofmaier, AKA Penny Peach, whom Worden adorably referred to as his “little sister.”
I don’t have any pictures from the show, because I was having too much fun listening. I really felt like I was witnessing an important moment in Iowa music history, and I wanted to take it all in.
After the show, I briefly ran into Moss, who gave me a hug and said, “Tony, you beautiful bastard, you made it!” Moss was pretty clearly overcome with emotion and the highs of performing, so I let them be and went to track down Anthony. He was, as you might expect, surrounded by friends and well-wishers, and he took the time to speak with all of them.
If you’ve ever spoken with someone who’s moving away, and you’re not sure you’re going to see them again, you know it’s weird. I consider Anthony a friend, but we have what I’d call a “working relationship,” so this wasn’t a tearful goodbye or anything. I’m grateful to know him, for the music and the memories. You’re still going to hear his music on IPR and I’m looking forward to hearing what his bandmates do next.
Plus, you never know. He might come back some time! Iowans have a tendency to boomerang back on occasion.

source

Meet Ms. Rocki, co-host of Juneteenth: The Movement 2022 – Iowa Public Radio

Joshalyn Hickey Johnson, also known as “Ms. Rocki,” was born and raised in Waterloo. Her parents were a biracial couple who had difficult times in the 1950’s, and after her family moved to Iowa from Mississippi during The Great Migration, she is the 6th generation in her family to live in the predominantly Black North End district of Waterloo.
Rocki worked a very labor-intensive job for 30 years at a pump factory in Waterloo, but always felt like she wanted to do more. The timing didn’t seem right, however. She was making a decent income, and, it being 1977, it was at the forefront of the Women’s Lib movement. Rocki was getting equal pay as a result, a rarity at the time.
The desire to do more continued, however, and Rocki found herself inspired by Oprah and Martha Stewart. After quitting her job, Rocki turned to her best friend, Chaveevah Banks Ferguson, who owned a publishing company. Rocki had always wanted to write, so she wrote a story she hoped would benefit children of families who were like her own. The book, “Good Morning, Lovey,” did well, so she wrote another one.
Then she started to paint. Oil on canvas, landscape paintings, exploring other avenues of creativity.
Recently, though, after a spate of negativity and bad actors in her community, Rocki decided she wanted to promote the good things about Waterloo, the town she grew up in and knew had positive things about it. Not just the distortions of social media that didn’t feel right to her, that didn’t feel like her city. The churches, the clubs, the organizations that meet and bring positivity to Waterloo.
Rocki and Chaveevah (who is an artist as well) began to go live on Facebook on Fridays, with a show they created, North End Update. They talk about the good things happening in Waterloo and the Cedar Valley area, and have tough conversations about race. The show blew up for the two friends, and the attention has given Rocki other writing opportunities.
She’s currently working on another children’s book, the story of Susan Clark, the first African-American woman to integrate schools in Iowa.

source

Calera Main Street wins award for downtown master plan – WBRC

BIRMINGHAM, Ala. (WBRC) – Calera Main Street has been slow for a couple of decades, but that’s about to change because this past Thursday, Calera Main Street received an award at the Main Street Alabama conference.
Calera Main Street received the award for excellence in planning/public space for its downtown master plan.
Jackie Batson, Executive Director Calera Main Street said it was a real honor
“To be able to be recognized for something that hasn’t even happened yet, but the plan is so significant for our future, we are super excited,” Batson said.
The Calera realization project is ultimately working to bring life back to the downtown area.
“We have done so in the last three years and part of that plan is to develop a master plan,” Batson said. “We have 157-page master plan which is ultimately our road map to how to redevelop and move forward with our district.”
They were able to bring in community design solution professionals that helped produce the master plan which encompasses everything for the downtown district.
“People ask us every day where we are going to park downtown,” Batson said. “It is slated to be designed and put together behind our shops on 31 on the other side of the street, it will be a wonderful first step.”
Batson said everything selected in this area will be consistent throughout the entire district that includes lighting and road pavement.
The city has committed $3.3 million from both private and public investments so far.
For updates follow Calera Main Street on social media and stay tuned.
CLICK HERE TO GET THE WBRC FOX6 NEWS APP
Subscribe to our WBRC newsletter and receive the latest local news and weather straight to your email.
Copyright 2022 WBRC. All rights reserved.

source

Basin-scale multi-decadal analysis of hydraulic fracturing and seismicity in western Canada shows non-recurrence of induced runaway fault rupture | Scientific Reports – Nature.com

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 14463 (2022)
Metrics details
Hydraulic fracturing (HF) is a reservoir stimulation technique that has been widely deployed in recent years to increase the productivity of light oil and/or natural gas from organic-rich, low-permeability formations. Although the process of fracturing a rock typically results in microseismic events of magnitude < 0, many cases of felt seismic events (typically magnitude 3.0 or larger) have also been reported. In the Western Canada Sedimentary Basin (WCSB), where more than 40,000 wells have been drilled and hydraulically fractured in the past two decades, the occurrence of HF-induced events has surged in some areas. Yet, many other areas of the WCSB have not experienced a significant increase in induced seismicity, despite a sharp increase in both the number of HF wells and the volumes of injected fluid. The relationship between injected volume and induced magnitudes can be quantified using the seismic efficiency ratio (SEFF), which describes the ratio between the net seismic moment release and the injected fluid volume. Runaway rupture, in which the fault rupture is dominated by the release of accumulated tectonic stresses, is inferred to be marked by an abrupt increase in SEFF to a value > 0.5. Most previous studies of induced earthquakes have been limited to a single operation and/or seismicity sequence. To better understand the observed variability of the seismic response to HF stimulations at a basin scale, we compiled HF data for all unconventional wells hydraulic fractured in the WCSB between 2000 and 2020, together with the seismicity reported during the same period. We grouped these observations into bins measuring 0.2° in longitude and 0.1° in latitude, or approximately 13 by 11 km. We identified 14 areas where large magnitude events resulted in high SEFF values, implying runaway rupture had taken place. However, we find that in these areas, sustained fluid injection did not lead to persistent high SEFF values. Instead, as injection continued, SEFF values returned to values less than 0.5. This suggests that there is a limited budget of tectonic strain energy available to generate runaway rupture events: once this is released, event magnitudes decrease even if high volume injection persists.
Hydraulic fracturing (HF) is a reservoir stimulation technique that has been extensively used to enhance the production of hydrocarbons from organic-rich, low-permeability shale formations. A causal association between hydraulic fracturing and induced (anthropogenic) earthquakes has been documented around the world1, including in the Bowland Shale in the UK2,3, the Sichuan Basin in China4, the Utica Shale in Ohio5, the Woodford Shale in Oklahoma6, and the Montney7 and Duvernay8 Formations in the Western Canada Sedimentary Basin (WCSB).
In the Western Canada Sedimentary Basin (WCSB), more than 40,000 wells have been drilled and hydraulically fractured between the years 2000 and 2020 (Fig. 1)9. Over this time, there has been a progressive increase in well depth, as deeper formations are explored, and an increase in the length of the lateral sections of horizontal wells. Taken together, this has led to higher volumes of fluid pumped into each HF well (Fig. 2). Many areas of the WCSB have not experienced any significant increase in seismicity, despite a large increase in both the number of hydraulically fractured wells and the volumes of fluid pumped10. However, in certain areas of western Canada, particularly near Fox Creek11 and Red Deer12 in central Alberta, and in the Horn River Basin13 and Fort St. John area in NE British Columbia14, the rate of seismicity has grown in conjunction with increasing intensity of hydraulic-fracturing operations. This spatial correlation has prompted provincial agencies to introduce new regulations, most notably Traffic Light Protocols (TLPs) to manage the risk of induced seismicity15,16.
Hydraulically fractured (HF) wells in the Western Canada Sedimentary Basin (WCSB) between January 1, 2000 and January 1, 2020, and the reported seismicity during the same period. The HF wells, colour-coded by the stimulated formation, together with the boundary of the Duvernay and Montney formations, are shown in (a), and the number of stimulated wells per formation is shown in (b). The moment magnitude of earthquakes and suspected blasts from the compiled public seismic catalogs45,49 are shown in (c), together with the date of the implementation of magnitude-based traffic-light protocols for induced seismicity (IS-TLP) in North Peace and the Kiskatinaw Seismic Monitoring and Mitigation Area (KSMMA) areas for the Montney Formation, and Fox Creek and Red Deer areas for the Duvernay formation (red vertical lines). The strong correlation between the number of hydraulic fractured wells and the number of seismic events, shown in (d), is the main motivation of this study. (e) Reference map of North America, with the studied area shown in (a) highlighted in red. The number of suspected blasts has also increase in western Canada since 2014; these were removed from the seismicity catalog prior to calculating response paths. The HF wells and earthquakes shown in (a) were grouped into bins measuring 0.2° in longitude and 0.1° in latitude (approximately 11 × 13 km) to calculate the total fluid pumped, total seismic moment and maximum earthquake magnitude inside each bin, as shown in Fig. 2. The temporal variation of the seismic and hydraulic fracturing activity illustrated in this figure is also shown in Video S1 in the supplementary materials. All geoLOGIC systems ltd. data and software is copyright 2022.
(a) Total fluid pumped (TFP) in every unit area of 0.2° longitude by 0.1° latitude (the unit areas are shown in Fig. 1a), and the moment magnitude of the seismic events (shown in Fig. 1c). The black dots show the maximum magnitude and total volume as of January 1, 2020 reported inside each unit area that contains hydraulically fractured (HF) wells, for seismic events that occurred after the start of HF operations and up to 90 days after completion. The grey lines show the response path, which tracks the magnitude-volume relationship over time. Although almost every black dot falls approximately at or below the McGarr moment cap25 marked by the red line, 14 response paths significantly surpass this relationship. In 93% of such cases (13 out of the 14 cases), continued fluid injection within the same unit area as the induced earthquake did not trigger another large seismic event. (b) Total well length (TWL) or measured depth (MD) of the HF wells, with the true vertical depth and total fluid pumped (TFP) during the HF stimulation of each well until January 1st, 2020 (c). The fluid intensity of the hydraulic stimulation (i.e., TFP/TWL, in m3/m), is also shown in (b). The temporal variation of the total fluid pumped per HF well and maximum moment magnitudes illustrated in this figure is also shown in Video S1 in the supplementary materials. All geoLOGIC systems ltd. data and software is copyright 2022.
Given the impacts of induced seismicity, both on hydrocarbon producers and on the public who live near to their operations17, much recent research has focussed on the factors that control the magnitudes of induced earthquakes2,18,19. Broadly speaking, two end-member scenarios have been proposed. In the arrested rupture scenario, events primarily release strain that has been introduced by the industrial activity, and hence the maximum magnitude is limited by the injection volume20,21,22. In the runaway rupture scenario, the fault rupture is initiated by the industrial activity, but it extends beyond the fluid-perturbed region and releases tectonically accumulated strain energy. In this scenario, the maximum magnitude is limited only by tectonic factors23.
In 1976, McGarr24 developed a formulation to relate the volume of rock and/or fluid extracted during mining to the maximum seismic moment released as induced seismicity. In 2014, McGarr25 adapted this formulation to estimate the maximum seismic moment release generated by subsurface fluid injection. The McGarr equation, and the resulting upper bound for seismic moment release, is based on several assumptions, including that all of the strain released by the seismicity is directly generated by the subsurface deformation induced by industrial activities. However, detailed microseismic observations of induced seismicity sequences indicate that hydraulic fracturing induced seismicity occurs on pre-existing tectonic faults, and therefore may be releasing stored tectonic strain energy, in addition to any strain imparted by the injection operations26,27. Atkinson et al.10 presented a selection of case studies from the WCSB where induced earthquake magnitudes appear to exceed the McGarr maximum magnitude based on volumes in HF wells, indicating that runaway rupture had occurred, whereas the induced earthquakes from water disposal wells in the same basin did not exceed McGarr’s maximum magnitude cap. Similarly, seismicity at the Pohang enhanced geothermal site in South Korea appears to have significantly exceeded the McGarr volume-based maximum magnitude28.
In this “runaway rupture” scenario28, the injection creates a perturbation that initialises earthquake rupture within the stimulated rock volume, but this rupture extends along larger faults into rock volumes that are unaffected by injection-induced pressure changes. In this scenario, the upper limit to induced earthquake magnitudes is controlled by the structural, geomechanical and tectonic characteristics of the formation in question, rather than by the scale of the injection operations. We note that even in a runaway rupture scenario, assuming a rate and state nucleation model, earthquake rate is still expected to scale with stressing rate, which in turn might be expected to scale with injection volume. Therefore, a scaling or correlation between injection volume and seismicity should still be expected in a runaway rupture scenario, but with no upper bound to the value of any scaling coefficient. We also note in passing that this scenario does not necessarily imply that the maximum magnitude, MMAX, for induced seismicity will be the same as tectonic MMAX estimates, since the formations targeted for hydraulic fracturing typically have lower stresses, and smaller faults, than mid-crustal rocks where larger earthquakes are typically generated29, which are the primary control on tectonic MMAX estimates.
The phenomenon of runaway rupture may impose its own limits on the amount of seismic moment released over the longer term. Tectonic strain energy is accumulated over geological timescales, meaning that there is no opportunity for this energy to be recharged over the timescales in which hydraulic fracturing takes place (years and/or decades). In principle, once this energy has been released, further injection in the vicinity of a reactivated fault will only be able to release the strain directly imparted by injection. Given the above, we might expect to observe the following with respect to earthquake magnitudes. During initial operations, tectonic strain energy can be released, leading (in some areas and some formations, where critically-stressed faults are present) to rapid escalation of event magnitudes. However, as injection continues within an area and the tectonic strain energy budget has been consumed, the cumulative seismic moment would be expected to revert to the bounds imposed by a volumetric cap. Alternatively, if the accumulated tectonic strain budget is sufficiently high, runaway rupture may persist for extended periods of time.
In this study, we examine and compare the temporal evolution of induced earthquake magnitudes and injection volumes in hydraulic fracturing wells in the WCSB over the past two decades. The availability of hydraulic fracturing and induced seismicity data from the WCSB, a region which covers over 1000 km from north to south, provides an opportunity to evaluate the hypotheses described above at a regional (basin) scale.
McGarr24 proposed a relationship between the cumulative seismic moment (ΣM0) of induced seismic events observed in oilfields and copper mines in the 1960s and 1970s, based on the volume changes (|ΔV|) created either by injection or extraction of fluids, or removal of rock volumes by mining. McGarr25 refined this relationship for cases of seismicity induced by the injection of large volumes of fluid—mostly saltwater disposal, enhanced geothermal systems (EGS) and unconventional hydrocarbon wells. In addition to the relationship between ΔV and ΣM0
McGarr25 further derived the expected moment of the largest induced event, M0(max), by assuming an earthquake stress drop equal to half of the stress buildup during a tectonic cycle and a b-value of 1 for the Gutenberg-Righter distribution30 of the magnitudes of the induced events:
The maximum moment magnitude of induced events, MMAX, can be calculated with the moment-magnitude scale from Hanks and Kanamori ({M}_{MAX}=({mathrm{log}}_{10}{M}_{0}left(mathrm{max}right)-9.05)/1.5)31.
In addition to the above-referenced assumptions, the McGarr relationship represents an upper bound, in that it assumes that the strain generated by subsurface injection is released as seismic energy. In reality, for many sites, much of the deformation may be released as aseismic deformation (for example, by creep on fractures and/or poroelastic expansion of the reservoir rocks). As a result, for most injection sites, ΣM0 falls well below the McGarr limit, and ({M}_{0}left(mathrm{max}right)ll mu Delta V). To account for this, Hallo et al.21 proposed a modification to the McGarr relationship, introducing a Seismic Efficiency Ratio (SEFF) parameter as a calibration factor to McGarr’s relationship,
SEFF has been observed to range between 10–6, to a ratio of unity (or higher)21. Noting that Eq. (2) assumes a stress drop corresponding to 50% of the maximum stress drop over a seismic cycle, Li et al.32 derived a physical interpretation for SEFF,
where c is the fraction of the full co-seismic stress drop during a tectonic loading cycle. This formulation implies that SEFF ≥ 0.5 and has no upper limit. A value of SEFF that is less than 0.5 does not require the release of any tectonic strain energy; rather, it indicates the prevalence of deformation processes associated with fluid injection21. Hence, hereafter, we refer to the situation whereby induced earthquake magnitudes are limited by the injected volume, as per McGarr25, as the arrested-rupture scenario, since the implication is that rupture dimensions, and hence earthquake magnitudes, are limited by the injection volume. We note that, in practice, a sequence of induced seismicity may release both tectonically stored energy and the injection-induced strain at a rate that produces an overall SEFF < 0.5. In such situations, discriminating between scenarios will be difficult in practice, unless high-resolution microseismicity observations are available from which deformation processes can be imaged in detail.
Galis et al.22 proposed an alternative model for arrested rupture cases where
in which γ is determined by the reservoir thickness, bulk modulus and coefficient of dynamic friction. However, the Galis et al. model is based on an assumption that the injection-induced perturbation can be represented as an expanding cylinder within the reservoir22, a situation that is unlikely to be representative of hydraulic fracturing in shale reservoirs, where the evolution and distribution of pressures may be strongly controlled by, for example, the presence of permeable structures such as fracture networks within the reservoir27.
The alternative endmember to the arrested rupture scenario is that induced earthquakes, while initiated by injection, generate ruptures that release significant quantities of stored tectonic strain energy. We refer to this as the runaway rupture scenario. Within the Hallo et al. SEFF framework, a runaway rupture scenario would be represented by values of SEFF that exceed 0.5, implying that the seismic moment released exceeds the amount of deformation created by the injection, and therefore that a significant portion of the seismic moment is generated by the release of tectonic strain energy. The behaviour of such cases over an extended period of injection then becomes of particular significance. If, for a given area, we initially observe runaway rupture and SEFF > 0.5, but over time SEFF trends back to 0.5 or lower, then we can assume that initial seismicity was dominated by the release of tectonic energy (i.e., runaway rupture), but that the tectonic strain energy budget was limited, and that subsequent injection is dominated by arrested ruptures, and is not able to generate seismicity at a rate that exceeds the McGarr cap.
Figure 3 shows schematic examples of conceptual response paths of seismic activity according to the scenarios described in the preceding paragraphs. Scenario 1 shows a situation with a relatively stable SEFF around 0.5, at the upper limit for propagation of arrested ruptures22, following the relationship described by Eqs. (3 and 4). Scenarios 2 and 3 show sharp increases in the seismic activity during injection operations that exceed the McGarr cap, implying the occurrence of runaway rupture and the release of significant amounts of stored tectonic strain energy. In Scenario 2, the contribution from the tectonic strain energy is then used up, and the evolution of magnitudes returns to that described by the McGarr cap. In Scenario 3, ΣM0 continues to exceed the McGarr cap over an extended period of time, implying a continued contribution to the overall seismic strain release from tectonic strain. Figure 3b shows the evolution of these scenarios with respect to SEFF: in the arrested rupture case (Scenario 1), SEFF is below 0.5 throughout; in Scenario 2, SEFF is initially greater than 0.5, but then drops below 0.5 as injection continues, and in Scenario 3 SEFF persists at values greater than 0.5 over an extended period.
Schematic illustrations of conceptual induced seismicity response paths. In (a) we show the potential evolution of ΣM0 relative to ΔV for three conceptual scenarios. Scenario 1 (in green) shows an arrested-rupture case, where magnitudes are always limited by the injection volume according to Eq. (3), with SEFF = 0.5. Scenario 2 (orange) shows a runaway rupture case, where ΣM0 exceeds this cap given by Eq. (3). However, over time, once the tectonic strain energy budget has been released the cumulative seismic moment relationship reverts to that described by Eq. 3. Scenario 3 (red) shows a runaway rupture case where the tectonic strain energy continues to contribute to the induced seismicity over an extended period, with ΣM0 continuing to exceed the Eq. (3) cap. In (b) we show the same conceptual scenario paths viewed with respect to SEFF.
The extent to which these scenarios occur is of great significance with respect to long-term assessments of seismic hazard from hydraulic fracturing-induced seismicity. It is already established that in certain settings, runaway rupture has occurred, and as such we cannot use the McGarr cap as an upper bound for event magnitudes10,28. The extent to which runaway rupture can persist is also of significance. Hydraulic fracturing-induced seismicity hazard assessments are often performed using observed rates of seismicity per well33, with these rates extrapolated into the future without any consideration of whether the rates of seismicity observed during initial fault reactivation might be representative of longer-term behaviour. If the budget of tectonic strain energy is high relative to the amount released by hydraulic fracturing, then we might expect the rates of induced seismicity to persist at a high level, whereas if the budget of tectonic strain energy is significantly depleted by the induced seismicity, then we might expect rates of seismicity to decrease over time.
In this study, we compiled hydraulic-fracturing data available from provincial regulators (see “Methods and datasets” section) for wells in western Canada. We grouped wells into “blocks” of 0.2° in longitude by 0.1° in latitude (approximately 13 × 11 km), aggregating the total volume of fluid injected inside each HF well located inside each block. This area size was chosen to implement a similar spatiotemporal association filter proposed for HF-induced seismicity in western Canada in recent studies8, where only seismic events located less that 5 km from any well pad were associated with the HF stimulation of any unconventional well. This 5 km radius (or 10 × 10 km for gridded areas) was then rounded to the nearest 0.1 degree in geographical coordinates for simplicity. This spatial discretisation enables analysis of fluid volumes injected at the scale of well pads (i.e., multiple horizontal wells drilled at close distances from each other), instead of individual wells8, thereby recognising that wells from multiple different pads could influence the same fault structures. The block dimensions are also larger than typical location uncertainties of the seismic events reported in regional catalogs34. A sensitivity analysis of the block size is presented in our supplementary materials.
To calculate SEFF for each block, we compared injection volumes to the cumulative seismic moments of earthquakes recorded within the block (Fig. 4). To ensure that we only consider events that may have been induced by hydraulic fracturing, we only use events that occurred within 3 months after any hydraulic fracturing activity within a block. This temporal filter for HF-induced earthquakes has also been suggested by Schultz et al.8, and reflects maximum observed delay-times between injection and induced seismicity identified by Verdon and Bommer30 in their worldwide compilation of hydraulic fracturing induced seismicity case studies. Sequences of wastewater disposal induced seismicity have also been identified in the WCSB—such sequences are often easy to identify as persistent, long-standing clusters of seismicity35. Events within such sequences were removed from our analysis. Verdon and Bommer36 have demonstrated that only certain formations within the WCSB are susceptible to induced seismicity—for example, there are no reliably-documented cases of hydraulic fracturing induced seismicity from wells targeting shallow, Cretaceous-age formations in the WCSB. In our analysis, we only include wells that target formations below the base-Mannville unconformity, which is a major basin-wide stratigraphic feature of Lower Cretaceous age that marks the onset of clastic deposition in a foreland basin setting. By contrast, Palaeozoic and lower Mesozoic deposition in the WCSB took place on an extensional/transtensional passive margin37. Notwithstanding these steps, the assessment of whether an earthquake (or sequence of seismicity) is induced (and if induced, by what particular activity) is not trivial38, and so the inclusion of any particular event in our analysis does not mean that we explicitly assign causation to a particular activity.
Example of the Seismic Efficiency Ratio (SEFF) calculated for one unit area of 0.2° in Longitude by 0.1° in Latitude (or approximately 13 × 11 km) near the town of Fox Creek in central Alberta. Most of the wells hydraulic fractured in this area were from the Duvernay and Montney formations (b), whereas the entire seismic activity in the same area (d) occurred only during the hydraulic stimulations of the Duvernay wells (e) despite all wells being located only a few kilometers apart from each other (shown in f). The shallow depth distribution of most of the same seismic events (shown in g), of less than 5 km, also suggests that these events where induced by the hydraulic fracturing stimulations of wells from the Duvernay formation (as natural events tend to have deeper locations). The seismic activity (d) has no clear correlation with the injection in the two water disposal (WD) wells (also shown in e) located inside the same unit area. The Gutenberg-Richter distribution of the seismic events from this area (shown in c), and calculated using a Maximum Likelihood Estimate method39), has a b-value close to 1 [as assumed in Eq. (2)], and a magnitude of completeness (Mcomp) of 2.3. The SEFF calculated for all unit areas in western Canada, shown in the background map in a), is also shown in Fig. 6 together with the calculated b-value and observed maximum moment magnitude, and also in Video S2 and listed in Table S1 in the supplementary materials. All geoLOGIC systems ltd. data and software is copyright 2022.
We computed the temporal evolution of SEFF within each block (Fig. 5), in order to assess the extent to which each of the endmember scenarios described in Fig. 3 might apply to the induced seismicity within the WCSB. We also computed the b-value and magnitude of completeness of the Gutenberg-Righter distribution of the seismic events for each block with at least 20 seismic events (shown in Figs. 4, 6 and Video S2, and listed in Table S1 in the supplementary material). To calculate b values for each block, we first measured the catalog completeness (Mcomp in Fig. 4c) as the magnitude with the largest numbers of events, and then calculated the a and b values of the Gutenberg-Righter distribution (log10 N = a − bM, where N is the number of events with magnitudes greater than or equal to M) using the Maximum Likelihood Estimate method39 (see example in Fig. 4c).
(a) Response path of the cumulative fluid pumped in all hydraulic-fractured wells located inside the unit areas of 0.2° in Longitude by 0.1° in Latitude shown in Fig. 4a (in grey), highlighting the response path of the unit area near Fox Creek obtained from the Total Fluid Pumped per well from this area (shown in Fig. 4e), and cumulative seismic moment of all seismic events inside the same area (shown in Fig. 4f near the HF wells, and their magnitudes shown in Fig. 4d). The response path calculated for all unit areas in western Canada, are also shown in Video S2 in the supplementary materials. The variability of the SEFF for this example unit area near Fox Creek, shown in (b), shows two clear runaway rupture sequences (similar than the scenario 2 illustrated in Fig. 3b), attributable to the reactivation of two different (but relatively close) faults located inside this unit area. A constant SEFF of 0.5, which corresponds to a seismic cycle with zero stress drop [from Eq. (4)] is also shown in (a) and (b) for reference. The True Vertical Depth (TVD) of the same hydraulic fractured wells are shown in (c), together with the TVD of the Precambrian basement (retrieved from the 3D provincial Geological Model of Alberta48). All geoLOGIC systems ltd. data and software is copyright 2022.
Cross-plots of variables for each grid block, including SEFF, MMAX, ΣM0, ΔV, and b-values. The dashed lines show the least-squares fit between each pair of variables. The gradient of this line, M, the Pearson’s correlation coefficient, R, and the statistical significance of this value, P, are reported in each sub-plot.
Figure 5a,b show the evolution of SEFF for all the blocks in our study area in which SEFF is close to 0.5 at any point during the two decades covered by our study. We omit grid blocks where SEFF ≪ 0.5, since these cases will not contribute to any assessment of the extent to which runaway rupture can occur and persist. We observe that values of SEFF higher than 0.5 are evident, indicating that runaway rupture has likely occurred. We identified 14 such cases, which are shown in detail in the Supplementary Material. However, the general trend for these cases is for SEFF to decrease to < 0.5 as injection proceeds, in accordance with Scenario 2 of Fig. 3. Indeed, there are no cases for which SEFF is greater than 0.5 after the cumulative injection of more than 105 m3. Given that typical injection volumes for Montney, Horn River and Duvernay wells are 20,000 m3 or more, this would indicate that runaway rupture does not persist after stimulation of more than 4 or 5 wells within a given block.
In Fig. 6, we provide cross-plots of relevant variables for each grid block, including ΣM0, SEFF, the cumulative injection volume ΔV, the largest observed magnitude MMAX, and b-values. Figure 6 also shows the gradient, m, of the least-squares fit between each pair of variables (for ΣM0, SEFF, and ΔV, fitted in log space), the Pearson’s correlation coefficient, R, and the P values for assessing the null hypothesis that there is no relationship between the variables. Some of the observed correlations are trivial and expected, such as between SEFF and ΣM0 (as per Eq. 3), and between MMAX and ΣM0.
We note the statistically significant negative correlation between SEFF and ΔV: this supports the situation discussed in the previous paragraph where high SEFF values do not persist as larger volumes are injected, leading to a negative correlation. We note the absence of correlation between ΔV and MMAX: this is because the occurrence of large events is primarily controlled by the presence of high SEFF values, rather than high injection volumes. As a result, we observed strongly significant correlation between MMAX and SEFF. We observe negative correlation between b-values and SEFF: high SEFF values (SEFF > − 1) are universally associated with b-values of approximately 1.0 or less, equivalent to values commonly observed for tectonic earthquakes40. In contrast, many of the blocks with lower SEFF values are associated with higher b-values. This is consistent with the hypothesis that cases with high SEFF represent situations where tectonic stress is released, and hence the b-values are similar to those observed for tectonic earthquakes. In contrast, higher b-values are often argued to indicate seismicity driven by fluid-movement within fault and fracture networks41, and hence indicative of seismicity driven directly by fluid injection rather than the release of tectonic stress. Overall, the strong correlations between the rates and magnitudes of the induced seismicity and the SEFF value shows that, for improved seismic hazard assessment, it is vital that we understand the controls on seismic efficiency, and how it might vary over both space and time for a given target formation and type of industrial activity. Understanding the controls on SEFF are more important the b values, which tend to revert to tectonic values once large earthquakes, driven by release of tectonic stresses, begin to occur.
Figures 4 and 5 show an example of the temporal evolution of SEFF calculated for one unit block near the town of Fox Creek in central Alberta. A similar plot of the SEFF for each unit block is shown in Video S2 in the Supplementary Material. The response path of this area, as delineated by the evolution of SEFF, shows evidence for runaway rupture with an initial sharp increase in the cumulative seismic moment. Over time, however, while seismic activity continues, it does so at a more gradual rate, resulting in a decrease in the SEFF, implying that seismicity becomes dominated by arrested ruptures that release strain energy imparted by the injection process. Figures S5 to S18 in the Supplementary Material highlights the unit blocks from Video S2 that had runaway ruptures (i.e., areas with SEFF higher than 0.5 at any moment).
Kao et al.42 calculated the rate of tectonic moment accumulation across the WCSB, based on geodetic observations of tectonic strain. They found that injection induced seismicity typically occurred in areas where the tectonic moment rate was MOTS = 1–2 × 106 Nm/km2/yr. Adjusting this rate for our blocks with areas of 11 × 13 km gives a tectonic moment rate of MOTS = 1.43–2.86 × 108 Nm/block/yr. On this basis, the occurrence of a single M 3.0 induced earthquake within a grid block, if it primarily releases accumulated tectonic strain energy, represents the tectonic strain accumulated over 100,000 years. This implies that the tectonic strain rate in the WCSB is insufficient to reload a fault and thus allow continued occurrence of runaway rupture within a given area that is subject to repeated injection activities. This observation is supported by our compilation of SEFF values within the basin: runaway rupture, as indicated by larger magnitude events occurring after small injection volumes, giving SEFF > 0.5, can (and does) occur. However, SEFF > 0.5 does not appear to persist as injection continues in a given location, which is consistent with the fact that a handful of induced events of moderate magnitude may be sufficient to release the tectonic strain accumulated over many thousands, or indeed millions of years.
In the Fox Creek area in central Alberta, Reyes-Canales et al.43 performed an assessment of event rates and Gutenberg-Richter b-values. This area is the subject of the Alberta Energy Regulator’s Subsurface Order No. 2 (SSO2)16, imposing a Traffic Light Protocol with a red light of M 4.0. The rate of occurrence of M > 3.0 events in this area shows a gradual decrease from 2015 through to 2020, while injection volumes into the Duvernay within this area have continued to rise (Fig. 7a). Reyes-Canales et al.43 suggested that some of this reduction in seismicity could be attributed to the targeting areas less susceptible to induced seismicity. However, it is also clear that there has been a reduction in the seismic activity of the eastern region inside the Fox Creek area that previously exhibited higher seismic activity. This reduction in the seismic activity occurred despite the per-well injection volumes in this area continuing to rise during this time (Fig. 7b). Reyes-Canales et al.40 suggested that the reduction could have been driven by the implementation of the SSO2 TLP, which encourages the operators to exercise additional precautions and mitigation strategies to avoid induced seismicity.
(a) Number of earthquakes of magnitude ≥ 3.0 per year reported inside the Fox Creek area designated in the Alberta Energy Regulator’s Subsurface Order No. 2 (SSO2)16 (shown in Figs. 1a and 4a), and total volume injected in HF wells inside the same area. (b) Average injected volume per year per HF well inside the Fox Creek area. Note the gradual decrease in the number of earthquakes per year of magnitude ≥ 3.0 since 2015, despite the constant increase in the total injected volume per year in HF wells, and in the average injected volume per HF well.
Our results presented above suggest an alternative hypothesis to explain the reduction in seismicity seen in the Fox Creek region since 2015. Rather than being primarily driven by the introduction of the TLP, it instead may represent a situation in which runaway rupture has become less prevalent as the tectonic strain accumulated over millennia is released by initial hydraulic fracturing in the area, with later wells subsequently limited by the the moment cap indicated by Eq. (3) with respect to the maximum available moment that could be generated. The relative significance of these factors could be further addressed by examining in more detail the extent to which operators have successfully taken pro-active steps to mitigate induced seismicity in practice—no actual examples of such were presented by Reyes-Canales et al.40, although detailed information of operators’ mitigation steps is seldom publicly available. Even in cases where seismogenic faults have been identified, mitigation steps taken by operators have often not been effective28,44. The fact that per-well injection volumes have continued to increase indicates that the TLP has not led to any major changes in operators’ completion strategies. Moreover, the reduction in seismicity in the Fox Creek area is observed at all magnitudes, whereas the SSO2 TLP, with a red light at M 4.0, is only designed to mitigate larger-magnitude events.
The WCSB has a wide variety of geological and tectonic features that influence the seismic response of unconventional wells to hydraulic fracturing stimulations. Responses range from virtually zero seismicity near shallower Bakken and Viking wells located in the east side of the basin, to the seismically active areas near some longer and deeper Duvernay and Montney wells on the west side of the basin. In some cases, the maximum magnitude has surpassed the expected levels estimated with McGarr’s cap function, which is commonly used to estimate the maximum seismicity level associated with fluid-injection operations. We fit a seismic efficiency ratio (SEFF), the ratio of the net seismic moment release and the forecasted maximum moment, and find that the obtained SEFF exhibits a complex evolution in such areas, with anomalously high seismic activity arising from inferred runaway rupture processes on pre-existing faults. In 93% of cases where exceedance of SEFF = 0.5 occurred (i.e., in 13 out of 14 cases), representing the presumed onset of stored tectonic stress release, continued injections within the same 0.2° × 0.1° area (in Latitude x Longitude, of approximately 13 × 11 km) did not lead to further seismicity with characteristics of runaway rupture.
To study the recent seismicity associated with hydraulic fracturing operations in the WCSB, we first compiled public seismic catalogs from the Composite Alberta Seismicity Catalog (CASC, retrieved from https://www.inducedseismicity.ca/catalogues/, last accessed on August 2021) that includes all seismic events reported in Alberta and NE British Columbia until January 2020, in the seismic catalog from the Geological Survey of Canada (GSC), Alberta Geological Survey (AGS), US Geological Survey (USGS), and the TransAlta/Nanometrics seismic network installed in 2013 around the Brazeau Dam in west-central Alberta45. The CASC catalog first eliminates duplicate events that appear in different catalogs, and classifies each event as an earthquake or a suspected blast (discriminated from seismic events from its time of occurrence -as every mine blast is schedule in afternoon hours only to ensure plenty of daylight during each blast– and its epicenter proximity to open pit coal mines or quarries). The AGS also provides in their seismic catalog (publicly available from https://ags-aer.shinyapps.io/Seismicity_waveform_app/) a similar discrimination for each reported seismic event, as Suspected Earthquake (SE), Suspected Induced (SI) or Known Induced (KI), although for KI events it does not specify induced by what (i.e., hydrocarbon production, enhanced oil recovery, salt water disposal, or hydraulic fracturing, all of them previously reported in western Canada46).
The CASC catalog also assigns a moment magnitude (MwAsg) to each event to normalize the magnitudes reported in different catalogs and using different scales (mostly local magnitude)45. The seismic events in the catalogs from the Horn River Basin47 and the GSC for the provinces of Saskatchewan and Manitoba were also added to the CASC catalog to cover the seismicity reported in the entire basin between 2000 and 2020.
The stimulation data from the wells hydraulic fractured in the same period (as injected fluid volumes, target formation, and well depth, length, and orientation) was retrieved with the software geoSCOUT (see Data availability). We then clustered the earthquake and well data in unit areas of 0.2° in Longitude by 0.1° in Latitude (or approximately 13 × 11 km, somewhat larger than a standard township of 6 × 6 miles) to calibrate McGarr’s cap function (Eq. 2) to estimate the maximum magnitude of an induced seismic event by calculating for each unit area a Seismic Efficiency Ratio (SEFF) from the total fluid pumped in every hydraulic fractured well, and the cumulative seismic moment from every seismic event reported inside each unit area. In the case of Alberta, we were also able to compare the wells’ proximity to the basement, as shown in Figs. 4g and 5c (another key geological parameter in relation to seismicity induced by water injection operations including hydraulic fracturing) from the depth of the Precambrian basement included in the province’s 3D geological model48. This was not possible for other unit areas within the same WCSB, particularly in NE British Columbia (as shown in Video S2 in the supplementary material), where no detailed map of the Precambrian basement has been released to date. Finally, the location of the water disposal wells, as the ones shown in Fig. 4f, were retrieved from the public databases of the provincial regulators of Alberta and British Columbia, and their monthly injection data is also publicly available in https://petroninja.com/ (see more details in Data availability). The authors thank geoLOGIC systems ltd. for their contribution of data and software used in this study. All geoLOGIC systems ltd. data and software is copyright 2022.
The supplementary material contains two animations (Videos S1 and S2) and one table (Table S1) based on Figs. 1 and 4, showing the temporal and spatial variation of hydraulic fracturing and seismic activity in the WCSB between the years 2000 and 2020. A sensitivity analysis of grid areas of different sizes and locations used for the estimation of the Seismic Efficiency Ratio (SEFF) inside each area, and their response path and variability of SEFF overtime (based on Fig. 5), are shown in Figs. S1 to S4, and the 14 cases of runaway rupture observed in our study are shown in detail in Figs. S5 to S18.
The regional seismic catalogs from western Canada used in this study are publicly available (see “Methods and datasets”). For convenience, the well information from the hydraulic fractured wells in the WCSB was retrieved using geoSCOUT software from geoLOGIC Systems Ltd., licensed to the Microseismic Industry Consortium, University of Calgary. Information from the HF stimulation from the same wells is also publicly available in http://fracfocus.ca/en and in the public databases of the provincial regulators of Alberta and British Columbia (https://www1.aer.ca/ProductCatalogue/WELL.html; https://reports.bcogc.ca/ogc/app001/r/ams_reports/1), that also include the location of the water disposal (WD) wells in both provinces. The monthly injection data of the WD wells reproduced in this manuscript and in its supplementary material is also publicly available from https://petroninja.com/.
Schultz, R. et al. Hydraulic fracturing-induced seismicity. Rev. Geophys. 58, 1–43 (2020).
Google Scholar 
Clarke, H., Verdon, J. P., Kettlety, T., Baird, A. F. & Kendall, J.-M. Real-time imaging, forecasting, and management of human-induced seismicity at Preston New Road, Lancashire, England. Seismol. Res. Lett. 90(5), 1902–1915 (2019).
Google Scholar 
Kettlety, T. & Verdon, J. P. Fault triggering mechanisms for hydraulic fracturing-induced seismicity from the Preston New Road, UK Case Study. Front. Earth Sci. 9, 670771 (2021).
Google Scholar 
Meng, L., McGarr, A., Zhou, L. & Zang, Y. An investigation of seismicity induced by hydraulic fracturing in the Sichuan Basin of China based on data from a temporary seismic network. Bull. Seismol. Soc. Am. 109(1), 348–357 (2019).
Google Scholar 
Kozłowska, M. et al. Maturity of nearby faults influences seismic hazard from hydraulic fracturing. Proc. Natl. Acad. Sci. USA 115(8), E1720–E1729 (2018).
ADS  PubMed  PubMed Central  Google Scholar 
Ries, R., Brudzinski, M. R., Skoumal, R. J. & Currie, B. S. Factors influencing the probability of hydraulic fracturing-induced seismicity in Oklahoma. Bull. Seismol. Soc. Am. 110(5), 2272–2282 (2020).
Google Scholar 
Mahani, A. B. et al. Fluid injection and seismic activity in the Northern Montney Play, British Columbia, Canada, with special reference to the 17 August 2015 Mw 4.6 induced earthquake. Bull. Seismol. Soc. Am. 107(2), 542–552 (2017).
Google Scholar 
Schultz, R., Atkinson, G., Eaton, D. W., Gu, Y. J. & Kao, H. Hydraulic fracturing volume is associated with induced earthquake productivity in the Duvernay play. Science 359, 304–308 (2018).
ADS  CAS  PubMed  Google Scholar 
Pedersen, P. K. & Eaton, D. W. Introduction to special section: Low-permeability resource plays of the Western Canada Sedimentary Basin—defining the sweet spots. Interpretation 6(2), SEi-SEii (2018).
Google Scholar 
Atkinson, G. M. et al. Hydraulic fracturing and seismicity in the Western Canada Sedimentary Basin. Seismol. Res. Lett. 87(3), 631–647 (2016).
Google Scholar 
Bao, X. & Eaton, D. W. Fault activation by hydraulic fracturing in western Canada. Science 354(6318), 1406–1409 (2016).
ADS  CAS  PubMed  Google Scholar 
Wang, J. et al. Sequential fault reactivation and secondary triggering in the March 2019 red deer induced earthquake swarm. Geophys. Res. Lett. 47(22), e2020GL090219 (2020).
ADS  CAS  Google Scholar 
Farahbod, A., Kao, H., Cassidy, J. & Walker, D. How did hydraulic-fracturing operations in the Horn River Basin change seismicity patterns in northeastern British Columbia, Canada?. Leading Edge 34(6), 658–663 (2015).
Google Scholar 
Fox, A. & Watson, N. Induced Seismicity Study in the Kiskatinaw Seismic Monitoring and Mitigation Area, British Columbia (BC Oil and Gas Commission, 2019).
Google Scholar 
Kao, H., Visser, R., Smith, B. & Venables, S. Performance assessment of the induced seismicity traffic light protocol for northeastern British Columbia and western Alberta. Lead. Edge 37(2), 117–126 (2018).
Google Scholar 
Shipman, T., MacDonald, R. & Byrnes, T. Experiences and learnings from induced seismicity regulation in Alberta. Interpretation 6(2), SE15–SE21 (2018).
Google Scholar 
Cremen, G. & Werner, M. A novel approach to assessing nuisance risk from seismicity induced by UK shale gas development, with implications for future policy design. Nat. Hazards Earth Syst. Sci. 20, 2701–2719 (2020).
ADS  Google Scholar 
Mancini, S., Werner, M., Segou, M. & Baptie, B. Probabilistic forecasting of hydraulic fracturing-induced seismicity using an injection-rate driven ETAS model. Seismol. Res. Lett. 92, 3471–3481 (2021).
Google Scholar 
Kwiatek, G. et al. Controlling fluid-induced seismicity during a 6.1-km-deep geothermal stimulation in Finland. Sci. Adv. 5, eaav7224 (2019).
ADS  PubMed  PubMed Central  Google Scholar 
Shapiro, S. A., Dinske, C. & Langenbruch, C. Seismogenic index and magnitude probability of earthquakes induced during reservoir fluid stimulations. Lead. Edge 29, 304–309 (2010).
Google Scholar 
Hallo, M., Oprsal, I., Eisne, L. & Ali, M. Y. Prediction of magnitude of the largest potentially induced seismic event. J. Seismol. 18, 421–431 (2014).
ADS  Google Scholar 
Galis, M., Ampuero, J. P., Mai, P. M. & Cappa, F. Induced seismicity provides insight into why earthquake ruptures stop. Sci. Adv. 3(12), eaap7528 (2017).
ADS  PubMed  PubMed Central  Google Scholar 
Gischig, V. Rupture propagation behavior and the largest possible earthquake induced by fluid injection into deep reservoirs. Geophys. Res. Lett. 42, 7420–7428 (2015).
ADS  Google Scholar 
McGarr, A. Seismic moments and volume changes. J. Geophys. Res. 81(8), 1487–1494 (1976).
ADS  Google Scholar 
McGarr, A. Maximum magnitude earthquakes induced by fluid injection. J. Geophys. Res. Solid Earth 119, 1008–1019 (2014).
ADS  Google Scholar 
Eyre, T. S., Eaton, D. W., Zecevic, M., D’Amico, D. & Kolos, D. Microseismicity reveals fault activation before Mw 4.1 hydraulic-fracturing induced earthquake. Geophys. J. Int. 218(1), 534–546. https://doi.org/10.1093/gji/ggz168,July (2019).
ADS  CAS  Google Scholar 
Igonin, N., Verdon, J. P., Kendall, J.-M. & Eaton, D. W. Large-scale fracture systems are permeable pathways for fault activation during hydraulic fracturing. J. Geophys. Res. Solid Earth 126, 1–19. https://doi.org/10.1029/2020JB020311 (2021).
Google Scholar 
Ellsworth, W. L., Giardini, D., Townend, J., Ge, S. & Shimamoto, T. Triggering of the Pohang, Korea, Earthquake (⁠Mw 5.5) by enhanced geothermal system stimulation. Seismol. Res. Lett. 90(5), 1844–1858. https://doi.org/10.1785/0220190102 (2019).
Google Scholar 
Verdon, J. P. & Bommer, J. J. Green, yellow, red, or out of the blue? An assessment of Traffic Light Schemes to mitigate the impact of hydraulic fracturing-induced seismicity. J. Seismol. 25, 301–326 (2021).
ADS  Google Scholar 
Gutenberg, B. & Richter, C. Frequency of earthquakes in California. Bull. Seismol. Soc. Am. 34, 591–610 (1944).
Google Scholar 
Hanks, T. C. & Kanamori, H. A moment magnitude scale. J. Geophys. Res. 84, 2348–2340 (1979).
ADS  Google Scholar 
Li, Z., Elsworth, D., Wang, C., EGS-Collab. Constraining maximum event magnitude during injection-triggered seismicity. Nat. Commun. 12, 1–9 (2021).
Google Scholar 
Ghofrani, H. & Atkinson, G. A preliminary statistical model for hydraulic fracture-induced seismicity in the Western Canada Sedimentary Basin. Geophys. Res. Lett. 43, 10164–10172. https://doi.org/10.1002/2016GL070042 (2016).
ADS  Google Scholar 
Schultz, R., Stern, V., Gu, Y. J. & Eaton, D. Detection threshold and location resolution of the Alberta geological survey earthquake catalogue. Seismol. Res. Lett. 86(2A), 385–397. https://doi.org/10.1785/0220140203 (2015).
Google Scholar 
Schultz, R., Stern, V. & Gu, Y. J. An investigation of seismicity clustered near the Cordel Field, west central Alberta, and its relation to a nearby disposal well. J. Geophys. Res. Solid Earth 119, 3410–3423. https://doi.org/10.1002/2013JB010836 (2014).
ADS  Google Scholar 
Verdon, J. & Bommer, J. Comment on “Activation rate of seismicity for hydraulic fracture wells in the Western Canadian Sedimentary Basin” by Ghofrani and Atkinson (2020). Bull. Seismol. Soc. Am. 111(6), 3459–3474 (2021).
Google Scholar 
Mossop, G., Shetsen, I. & comp. Geological atlas of the Western Canada Sedimentary Basin, Canadian Society of Petroleum Geologists and Alberta Research Council (1994). https://ags.aer.ca/reports/atlas-western-canada-sedimentary-basin.
Verdon, J. P., Baptie, B. J. & Bommer, J. J. An improved framework for discriminating seismicity induced by industrial activities from natural earthquakes. Seismol. Res. Lett. 90(4), 1592–1611. https://doi.org/10.1785/0220190030 (2019).
Google Scholar 
Aki, K. Maximum likelihood estimate of b in the formula logN=a-bM and its confidence limits. Bull. Earthq. Res. Inst. 43, 237–239 (1965).
Google Scholar 
Frohlich, C. & Davis, S. D. Teleseismic b values; or, much ado about 1.0. J. Geophys. Res. Solid Earth https://doi.org/10.1029/92JB01891 (1993).
Google Scholar 
Verdon, J. Fractal dimension of microseismic events via the two-point correlation dimension, and its correlation with b values. In 4th EAGE Passive Seismic Workshop, Amsterdam, The Netherlands (2013).
Kao, H. et al. Induced seismicity in Western Canada linked to tectonic strain rate: Implications for regional seismic hazard. Geophys. Res. Lett. 45, 11104–11115. https://doi.org/10.1029/2018GL079288 (2018).
ADS  Google Scholar 
Reyes-Canales, M., Rodriguez-Pradilla, G., Yusifbayov, J. & Baan, M. V. D. The rise, peak and decline of the seismic hazard related to hydraulic fracturing activities in the Duvernay play, Fox Creek area, Alberta. J. Geophys. Res. Solid Earth 127, 56. https://doi.org/10.1029/2021JB023060 (2022).
Google Scholar 
Kettlety, T., Verdon, J. P., Butcher, A., Hampson, M. & Craddock, L. High-resolution imaging of the ML 2.9 August 2019 earthquake in Lancashire, United Kingdom, induced by hydraulic fracturing during Preston New Road PNR-2 Operations. Seismol. Res. Lett. 92(1), 151–169. https://doi.org/10.1785/0220200187 (2021).
Google Scholar 
Fereidoni, A. & Cui, L. Composite Alberta Seismicity Catalog: CASC2014-x (2015).
Eaton, D. W. & Eyre, T. S. Induced seismicity in Western Canada: causes and consequences. In Geohazards 7, Canmore, Alberta, Canada (2018).
Farahbod, A. M., Kao, H. & Cassidy, J. F. A relocated earthquake catalogue for seismic events in the Horn River Basin, northeast British Columbia, using the single-station location method. Geological Survey of Canada, Open File 8146 (2016).
Alberta Geological Survey. 3D provincial geological framework model of Alberta, version 2 (Alberta Energy Regulator/Alberta Geological Survey, 2019).
Schultz, R. & Stern, V. The regional Alberta observatory for earthquake studies network (RAVEN). CSEG Rec. 40(8), 34–37 (2015).
Google Scholar 
Download references
We would like to thank all the sponsors of the Bristol University Microseismicity ProjectS group and the Microseismic Industry Consortium for their support, and geoLOGIC Systems Ltd. for providing access to the well data analyzed in this study through their geoSCOUT platform. We are also very thankful for the discussions with Melanie Popp and Alemayehu Aklilu we had during the preparation of this manuscript. We thank geoLOGIC Systems Ltd. for their contribution of data and software used in this study. All geoLOGIC Systems Ltd. data and software is copyright 2022. This research was supported by the Natural Science and Engineering Research Council of Canada (NSERC, Grant Number IRCPJ/485692-2014), and by the UK Natural Environment Research Council (NERC, Grant Number NE/R018162/1).
Germán Rodríguez-Pradilla
Present address: School of Earth Sciences, University of Bristol, Bristol, UK
Department of Geoscience, University of Calgary, Calgary, AB, Canada
Germán Rodríguez-Pradilla & David W. Eaton
School of Earth Sciences, University of Bristol, Bristol, UK
James P. Verdon
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
G.R.P. first compiled the hydraulic fracturing and seismicity datasets from the WCSB to illustrate in this manuscript the spatial variability of the seismic response of large-scale HF stimulations in a full basin, multi-year timescale, based on the methodology of previous studies of HF-induced seismicity from D.W.E. and J.P.V. All authors discussed the methods and results and jointly produced the interpretations and conclusions. G.R.P. and J.P.V. co-wrote and edited the article.
Correspondence to Germán Rodríguez-Pradilla, David W. Eaton or James P. Verdon.
The BUMPS and MIC consortia are both sponsored by a range of hydrocarbon operating companies, some of whom have conducted hydraulic fracturing activities in the WCSB. JPV has acted as an independent consultant for a variety of organisations including hydrocarbon operating companies and governmental organisations on issues pertaining to induced seismicity. The results and conclusions are those of the authors—representatives of our sponsors have not influenced the analyses presented here.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Video 1.
Supplementary Video 2.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Rodríguez-Pradilla, G., Eaton, D.W. & Verdon, J.P. Basin-scale multi-decadal analysis of hydraulic fracturing and seismicity in western Canada shows non-recurrence of induced runaway fault rupture. Sci Rep 12, 14463 (2022). https://doi.org/10.1038/s41598-022-18505-0
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-18505-0
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Advanced search
Scientific Reports (Sci Rep) ISSN 2045-2322 (online)
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

source

Rents Just Set a New Record High, but There’s Also Good News – Realtor.com News

(Brendan Smialowski / AFP via Getty Images)
The wild rent hikes that landlords delighted in at the expense of their tenants appear to be tapering off.
The housing market slowdown has spilled over into the rental market, affecting how big of a bump many landlords are requesting. Rents, which hit another all-time high of $1,879 a month in July, rose just $3 a month from June in the 50 largest metropolitan areas, according to a recent Realtor.com® report.
And while they were up 12.3% in July compared with a year earlier, that’s down from a nearly 17% price spike seen in the spring. This was the smallest increase since August of last year. (Metros include the main city as well as the surrounding towns, suburbs, and smaller urban areas. This explains why rents within big-city downtowns may be substantially higher.)
The report was based on the apartments, condos, townhomes, and single-family homes listed for rent on Realtor.com® in July in the 50 largest metros. Only studios and one-bedroom and two-bedroom homes were included in the analysis.
“It’s important that renters understand that slowing rent growth is not the same thing as cheaper rent,” says Realtor.com Chief Economist Danielle Hale. “Landlords have eased up on the size of rent increases, but many renters are still feeling the pinch on their monthly budgets. Even as they juggled higher costs for food and groceries and transportation, [many say] rising rent and housing expenses is the biggest source of financial strain.”
Many renters are simply tapped out. Between soaring inflation, higher gas prices, and the stock and cryptocurrency markets taking a beating, they have less cash on hand to spend more on housing.
Meanwhile, over the past year, plenty of landlords have successfully made up for what they lost during the eviction moratorium and when many rentals were heavily discounted during the COVID-19 pandemic. So rent increases have slowed.
“I expect rent growth to continue slowing in the near term,” says Hale. However, renting is still cheaper than buying in many parts of the country. And as there aren’t enough homes for rent or sale to go around, prices will likely stay high until more units become available.
“We’ve seen builders pivot their attention to [putting up more apartments]. As these projects are completed, they should help the supply of homes for rent better meet demand … and relieve pressure on higher rents,” says Hale.
Renters in Miami continued to experience the biggest sticker shock. Landlords raised rents about 26.2% in July compared with just one year earlier. However, as painful as those increases were for Magic City residents, they were still far below the 51.6% jump in April.
Tenants in New York City, who are facing lines around the block during open houses and bidding wars, also felt the sting of significant rent hikes. Rents went up 25.4% in New York. Within the city itself, they were up 38.3% compared with a year earlier. In the burbs outside of New York City, rents grew by just 12.9%.
Rents also rose 24.8% in Boston, 20.6% in Chicago, and 20.4% in Orlando, FL.
“Miami continues to top the list with the highest rent growth, but it’s no longer in a league of its own,” says Hale. “Still, as rents in Miami have surged, its relative affordability has dwindled.”
Those living in the bigger cities saw higher rent hikes than those in the suburbs as workers return to offices, restaurants and bars reopen, and entertainment is once again in full swing. Rents jumped 12.8% year over year in cities and rose 11.7% in the burbs.
The price of studios, common in cities, is also going up more than one- and two-bedroom units as renters increasingly seek out more affordable options. Monthly studio prices rose 14.3%.
“I expect urban rent growth to exceed suburban rent growth,” says Hale. “This means that the premium renters have to pay to live downtown, in the middle of everything, is likely to go up.”
Unfortunately for cash-strapped renters, rental prices are up across the nation. The lowest increases were in Minneapolis, where rents grew by 3.3% in July. The Midwestern city was followed by Sacramento, CA, at 3.4%; Riverside, CA, at 4.2%; Phoenix, at 4.8%; and Buffalo, NY, at 6.3%.
Clare Trapasso is the deputy news editor of Realtor.com where she writes and edits news and data stories. She previously wrote for a Financial Times publication, the New York Daily News, and the Associated Press. She also taught journalism courses at several New York City colleges. Email [email protected] or follow @claretrap on Twitter.
Twitter Follow @claretrap
Trends
Home Improvement
Unique Homes
Sell
Celebrity Real Estate

source

Cardio and Strength Training May Help You Live Longer, Study Says – The New York Times

Advertisement
Supported by
A consensus is building among experts that both strength training and cardio‌ are important for longevity.
Send any friend a story
As a subscriber, you have 10 gift articles to give each month. Anyone can read what you share.

Regular physical activity has many known health benefits, one of which is that it might help you live longer. But what’s still being determined are the types and duration of exercise that offer the most protection.
In a new study published in The British Journal of Sports Medicine, researchers found that while doing either aerobic exercise or strength training was associated with a lower risk of dying during the study’s time frame, regularly doing both — one to three hours a week of aerobic exercise and one to two weekly strength training sessions — was associated with an even lower mortality risk.
Switching from a sedentary lifestyle to a workout schedule is comparable to “smoking versus not smoking,” said Carver Coleman, a data scientist and one of the authors of the study.
The paper is the latest evidence in a trend showing the importance of strength training in longevity and overall health.
“The study is exciting because it does support having a mix of both aerobic and strength training,” said Dr. Kenneth Koncilja, a gerontologist at the Cleveland Clinic, who was not involved in the study. “That is definitely something I talk with my patients about all the time.”
For the study, researchers used National Health Interview Survey data, which followed 416,420 American adults recruited between 1997 and 2014. Participants filled out questionnaires detailing the types of physical activity they had been doing, which included specifying how much moderate or vigorous exercise, along with how many sessions of muscle-strengthening exercises they did in a week.
After adjusting for factors such as age, gender, income, education, marital status and whether they had chronic conditions, such as diabetes, heart disease or cancer, researchers found that people who engaged in one hour of moderate to vigorous aerobic activity a week had a 15 percent lower mortality risk. Mortality risk was 27 percent lower for those who did three hours a week.
But those who also took part in one to two strength-training sessions per week had an even lower mortality risk — a full 40 percent lower than those who didn’t exercise at all. This was roughly the difference between a nonsmoker and someone with a half-a-pack-a-day habit.
Experts say it has been difficult to study longevity and strength training because so few people do it regularly. Even in the recent study, just 24 percent of participants did regular strength training (as opposed to 63 percent who said they did aerobic workouts). “Even with huge cohorts like we had here, the numbers are still relatively small,” said Arden Pope, an economist at Brigham Young University and one of the authors of the paper.
However, research is starting to catch up. In a recent meta-analysis, published February, also in The British Journal of Sports Medicine, researchers were able to quantify the effect of strength training on longevity outside of aerobic activity.
They found the largest reduction was associated with 30 to 60 minutes of strength training a week, with a 10 to 20 percent drop in the risk of mortality, cardiovascular disease and cancer. However, as Haruki Momma, a sports scientist at Tohoku University and one of the authors of the study, points out, there needs to be more research done to find the optimal amount of strength training.
Even though more research is needed, experts generally agree that regular strength training can have important benefits for healthy aging, including maintaining a high quality of life.
“You will function at a much higher level, for longer, if you have good muscle strength,” said Dr. Bruce Moseley, an orthopedic surgeon at Baylor College of Medicine.
Muscle strength is required for a number of daily activities, such as getting out of a chair, opening a jar of pickles, carrying groceries into the house or doing yardwork. However, “we progressively lose muscle mass as we age,” said Monica Ciolino, a physical therapist at Washington University at St. Louis.
This muscle loss usually starts in a person’s 30s and progresses with age. However, “we can absolutely fend off the negative effects” with regular strength training, Dr. Ciolino said. And it’s never too late to start. Research shows even septuagenarians with mobility issues can benefit from a regular strength-training program.
Dr. Moseley suggests aiming for a consistent strength-training schedule and easing into it to avoid overuse injuries.
“Keep it at a light and easy level at first,” he said. “Once your body starts getting adjusted, then you can start increasing.”
If you are still uncertain about certain exercises, he recommends seeking out expert advice through an exercise class or consulting with a personal trainer. The important thing, he said, is to get to started and to make it a habit. Not only can this help you live longer, it will improve your quality of life.
“When I ask people, ‘What does successful aging mean to you?’ people say they want to be independent, they want to maintain their function and quality of life, they want to do the things that they want to do,” Dr. Koncilja said. “It’s not necessarily just living as long as possible.”
Rachel Fairbank is a freelance science writer based in Texas.
Advertisement

source

AFMX Offers Local Filmmakers Opportunities To Pitch Projects To Industry Pros – Los Alamos Daily Post

AFMX News:
ALBUQUERQUE — Albuquerque Film & Music Experience (AFMX), dedicated to workforce development for New Mexico creatives, is offering two opportunities for filmmakers to pitch their work during the organization’s 10th anniversary events Sept. 13-18.
Executive Story Editor Christopher Lockhart of Facebook’s The Inside Pitch hosts The Inside Pitch live. Lockhart, along with Joshua Michael Stern (Jobs, Swing Vote, Why Women Kill), Stewart Lyons (Breaking Bad, Better Call Saul, The Cleaning Lady), Karen Criswell (Executive Producer, BLKBX and former vice president of operations for DreamWorks Studios) and Matthew McDuffie (HBO, Showtime, CBS, Fox and Warner Bros.) will hear pitches and offer constructive feedback.
Both panels are for educational purposes and will provide valuable information to all participants.
Inside The Inside Pitch occurs 12:30-2:30 p.m., Saturday, Sept. 17, at the National Hispanic Cultural Center’s Bank of America Theatre. Lockhart will take participants and the audience through crafting the logline, pitching your project – including do’s and don’ts, structuring your project, and attracting producers to your script. Those wishing to submit loglines to consider discussing during this conversation must complete the form by 11:59 p.m. MDT, Saturday, Aug. 27, 2022. A limited number of loglines are selected for discussion. 
Perfecting Your Pitch occurs 3:30-5:30 p.m., Saturday, Sept. 17, at the National Hispanic Cultural Center’s Bank of America Theatre. The event is an opportunity for filmmakers and writers to practice pitching to Hollywood executives and producers. There are limited spots available. Those interested in being considered to pitch must complete the short form and upload a video pitch by 11:59 p.m. MDT, Saturday, Aug. 27, 2022. All submitters will be notified in early September.
“AFMX is committed to providing opportunities to local filmmakers, musicians, and other creatives. As we grow, we will build more opportunities to elevate creatives in our area. We are also strongly focused on supporting students seeking careers in creative industries, and ensuring New Mexicans are competitive for above-the-line positions in film and music,” AFMX Executive Director Ivan Wiener said.  
New Mexico filmmakers are encouraged to participate in these two opportunities and become part of the AFMX experience.
For a full lineup of September movies, music, panels, events and special guests, and to purchase tickets and passes, visit https://www.afmxnm.com/afmx-10th-anniversary-2022. 
Sponsors power our work; we can’t do it without critical community support. Special thanks to our sponsors, Reel Solutions, Sunny505, iHeart Radio, Bernalillo County Commissioner Steven Michael Quezada, Comcast NBC Universal, UNM Film & Digital Arts, One Albuquerque Film Office, Jouska Road Productions, M’Tucci’s Bar Roma, Yamaha Entertainment Group, Wells Fargo Advisors, Venturi Realty Group, Enchanted Rain Films, and many more.
About Christopher Lockhart 
Christopher Lockhart is an executive, filmmaker and educator with 30-plus years of industry experience. He’s read over 60,000 screenplays in his career. As Executive, Story Editor, Producer at, the world’s largest diversified talent agency, he curates film and TV projects for A-list actors such as Denzel Washington. In his spare time, he started The Inside Pitch, which happens to live on Facebook, where he moderates nearly 14,000 creatives and offers daily advice and feedback on the Hollywood script maze. Before starting the online group, his writing workshop, also called The Inside Pitch, was filmed for Los Angeles television and earned him an Emmy Award nomination.
About Other Pitch Panelists 
Stewart Lyons
Co-Executive Producer, Line Producer, Director, Writer and Production Executive Stewart Lyons works on projects with Netflix, Sony Pictures Television, Warner Brothers, Amazon, Starz, Apple, HBO, FX, AMC and three broadcast networks. Stewart is a production consultant who has done detailed production analysis, schedules, and/or budgets for over 300 television pilots for television broadcast, cable and streaming services. Stewart has credits on more than 600 episodes of television, including 33 series and 29 pilots (21 ordered to series). One hundred of these episodes were shot in New Mexico. His most recent projects include The Cleaning Lady, Roswell NM, Snowfall and Better Call Saul. Stewart worked on the pilot and every episode of Breaking Bad, for which he received two Emmys and additional awards from the Directors Guild of America and Producers Guild of America, plus two Peabody Awards and a Golden Globe. He teaches line producing at the graduate level at DePaul University.
Josh Stern
Showrunner, Writer, Producer and Director Joshua Michael Stern often self-generates financing for his projects and offers a unique perspective on how to develop and deliver successful pitches. His feature films include Jobs, starring Ashton Kutcher, Josh Gad and J.K. Simmons; Neverwas, starring Aaron Eckhart, Sir Ian McKellan, Jessica Lange and others; and Disney’s Swing Vote, starring Kevin Costner. His series include Lionsgate’s Graves, which he created and wrote, and Paramount+ ongoing series Why Women Kill, for which he is Executive Producer. Stern is in development for a feature-film version of King Lear he adapted with Anthony Hopkins to play the lead, as well as multiple original series with studios and platforms, including a show with Uma Thurman.
Karen Criswell
Executive Producer Karen Criswell served as VP of Operations for DreamWorks Studios. Criswell ran strategy and operations for the teams behind a slate of interactive games, music development deals, narrative films and television productions that
occurred during her 18-year tenure. Her time at the studio included three “Best Picture” Oscars for American Beauty,
Gladiator and A Beautiful Mind. Criswell left in 2014 to focus on independent production consulting and creative work in documentary, film and emerging new media. Her collaboration with Frank Donner at BLKBX Creative Group spans decades, and she is currently focused on the growth of BLKBX Originals. 
Matthew McDuffie
Screenwriter Matthew McDuffie has been a professional screenwriter for 30 years writes written for HBO, Showtime, CBS, Fox and Warner Bros. (where he currently has a deal to develop a television series) and has worked with the producers of Six Feet
Under, Rome, ER, Ocean’s Eleven, Shameless and Saving Private Ryan. He is the writer and director of the film Burning Bodhi, starring Kaley Cuoco and Virginia Madsen, and wrote the screenplay for The Face of Love, starring Annette Bening and Ed Harris, with the film’s director, Arie Posin. McDuffie was nominated for a Writers Guild Award for his teleplay of Anne Rule’s account of Ted Bundy, The Stranger Beside Me. He also created the story for Lifetime’s Odd Girl Out, adapted Meg Wolitzer’s Surrender, Dorothy for Diane Keaton and turned the novel A Cool, Dry Place into a film starring Vince Vaughn. McDuffie teaches introductory, advanced and graduate levels of screenwriting at The University of New Mexico as a Professor of Practice.
About AFME | AFMX
The AFME Foundation, a non-profit 501 (c) (3) organization, supports the nurturing, success, and growth of a vibrant creative community, specifically through film, music, and the arts, and seeks to help further a world-class economic center of excellence for these industries in Albuquerque, New Mexico. It produces the Albuquerque Film & Music Experience (AFMX), an annual film and music festival that attracts prominent attendees, filmmakers, musicians and visionaries from around the globe to celebrate the art of storytelling and collaborate into the future. The Foundation also supports the Albuquerque film, music and art scenes through the creation, facilitation, and support of complimentary, mission-based projects and programs. Our purpose is to provide opportunities for future generations while increasing exposure and economic impact for the City of Albuquerque, the State of New Mexico, and our partners.

Copyright © 2012-2022 The Los Alamos Daily Post is the Official Newspaper of Record in Los Alamos County. This Site and all information contained here including, but not limited to news stories, photographs, videos, charts, graphs and graphics is the property of the Los Alamos Daily Post, unless otherwise noted. Permission to reprint in whole or in part is hereby granted, provided that the Los Alamos Daily Post and the author/photographer are properly cited. Opinions expressed by readers, columnists and other contributors do not necessarily reflect the views of the Los Alamos Daily Post. The Los Alamos Daily Post newspaper was founded by Carol A. Clark on Feb. 7, 2012.

source

Portland Whole Health Learning Live Educational Event | VA Maine health care – Veterans Affairs

An official website of the United States government
The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you're on a federal government site.
The site is secure.
The https:// ensures that you're connecting to the official website and that any information you provide is encrypted and sent securely.
Portland Whole Health Learning Live Educational Event
When:
Wed. Oct 19, 2022, 11:00 am – 1:00 pm ET
Where:
Portland VA Clinic

Cost:
Free
Whole Health is VA’s approach to care that supports Veteran’s health and well-being and centers around what matters to the Veteran, not what is the matter with them. This process includes their health team getting to know Veterans on a more personal level to develop a personalized health plan based on their values, needs, and goals.
Whole Health puts Veterans in control of their care. It focuses on self-care, skill building and support. These services are not diagnosis or disease based, but support the personal health plan of each Veteran. Approaches such as stress reduction, yoga, tai chi, mindfulness, nutrition, acupuncture, and health coaching are available.
ADDITIONAL DETAILS:                
Explore the Wheel of Health via experiential activities and browse information & resources provided by VA Maine Healthcare System. Attention Maine Veterans: you are invited to consider what matters to you and explore the many components that contribute to your WholeHealth while mixing with fellow Veterans & VA staff while learning about the WholeHealth model of care and services available to Veterans at the VA Maine Healthcare System.
This event will be complying with current National CDC and Veteran Heath Administration pandemic response guidance.
Last updated:

source

Satin Jackets' 5 Favorite Plugins For Producing Nu-Disco – Magnetic Magazine

Satin Jackets' signature sound has made him a mainstay in many worlds. Whether it's his warm vocal takes, funk bass lines, grooving percussions, or unique live sets, his signature nu-disco sound has something for everyone to fall in love with. 
But achieving such a signature nu-disco sound is more accessible said than done, and it can often seem like magic how producers like Satin Jackets do what they do in the studio. 
So we decided to lock him down, pick his brain, and discover precisely what plugins he's using to make amazing Nu-Disco songs. 
Making More Melodic Music? Check Out Budakid's Favorite Melodic House Plugins
Satin Jackets' newest single is the North Star of what Nu-Disco producers should aim for in their productions. It's funky, clean, warm, and arresting. 
So before Satin Jackets breaks down his favorite synths that went into the making of this track, give the single a few listens so that your ears can studio the exact timbres and nuances in the track that these plugins help you achieve. 
This one can work wonders on the beat bus or drums and synths with a clean or tape setting. It brings out nice mids and harmonics while cutting on the highs that can sound sharp. 
One must be careful not to destroy the bass or introduce too much distortion. In the end, the beat can feel like it has a better grip and sits more present in the mix.
Snag It Here
Like the original hardware, this one tightens the screws on every mix. Applied carefully, with a low attack, I usually split the mid and side bands rather than left and right channels so I can also tweak the stereo image a bit. 
The result sounds fuller and warmer, just like everyone wants. It can be used every time towards the end when most of the mixing is done.
Snag It Here
I own the hardware but have moved towards the plugin for convenience and mobility. It adds sparkle and stardust to every mix, but it’s essential not to overdo it. 
In most cases, taking the setting one notch back from where it sounded good is the right amount. I usually set the bass left to sub, which adds a nice amount of basement that we all like so much. Also, the stereo expander never hurts as long as it stays below half.
Snag It Here
This one can now be used natively without a UA interface with the new Spark subscription model. 
It’s a convenient tool to level out frequency curves by checking if a peak or a dip by one or two steps sounds better than before. Again, less is more here. Thankfully, most changes are subtle but still crisp and noticeable.
Snag It Here
This is my go-to plugin on the beat bus to make it sound bigger. There’s a “fat” setting, but “warm” sometimes work better depending on the situation. One can apply quite a bit of either setting while going easy on the compression threshold and giving just a tiny bit of saturation. 
It’s essential to keep checking the input signal so it is always leveled correctly.
Snag It Here
Managing Editor at Magnetic Magazine – Former Marketing Manager at the Hyperbits Masterclass – Writer, Content Strategist, Music Producer, and Record Label Manager 

source

Eight Artists We Loved At Mission Creek 2022 – Iowa Public Radio

Despite being Iowa’s first capital city, Iowa City has a chip on its shoulders, a complex related to not quite being at the center. With its university and its history, the town, maybe understandably, doesn’t like to imagine itself as a satellite of Des Moines. This comes through in the planning and programming each year for Mission Creek Music Festival. The resiliency of the local music community to keep building, growing and making art through the pandemic was on full display in early April in Iowa City.
Friday afternoon to a crowd of bobbing heads at Mission Creek, Ahzia got to his hook which might just encapsulate the true ethos behind the festival. “Tell them where you came from,” he repeated. “Tell them where you came from.”
This is the trick of Iowa City and maybe any community trying to make something. It’s excited to raise up its own and allow them space alongside a big name. Putting them in the conversation. Asking questions. Drawing connections. And revealing the sinew that helps us tell them where we come from.
Over a long three-day festival, Iowa City’s Anthony Worden and I ran around trying to soak in as many different acts as possible. Maybe the speed of it all was easy for a more athletic attendee. But for us, it was decidedly tough to keep pace. If anything kept us on the trail it was the artists we kept finding. Whether an energetic performer or a challenging sound — some had both — there was something to plug into, something that kept us going.
Here are eight acts that I can’t get out of mind even two weeks out.

ALYX RUSH


Starting the weekend on the biggest stage is a tough spot to fill, but not one that Iowa artist Alyx Rush had any issue with. His is a high-energy and heartfelt R&B that spotlights his tight vocal work.
Of course, if you’re looking for some music to start with, I’ll heartily recommend his newest release “Body Rock” (2021). It’s got the kind of cool, sweet sex appeal of a Frank Ocean track. It’s a great place to start.
But don’t sleep on seeing Rush live. He’s playing with bassist Blake Shaw and guitarist Dan Padley, a real Iowa City Wrecking Crew. If you see the band on a lineup, make sure you make it out. Hint: Rush is playing 80/35 this summer in Des Moines.

OHMME


The most hypnotic performance from the weekend was from Ohmme at Trumpet Blossom. Chicago-based singer-guitarists Macie Stewart and Sima Cunningham layer powerful harmonies over some fuzzy, at-times shoe-gazey guitar. This back-and-forth could have carried the performance for another hour.
The A-side of their 2020 single “Mine” shows off this interplay between the singers and is a good start. If you like that, work your way through their 2020 album “Fantasize Your Ghost” to the song “The Limit.” You won’t regret it.

TEMPERS


The stairwell outback at Gabe’s was made for the muffled sounds of slinky synth-pop. Inside that Friday night, Tempers’ Jasmine Golestaneh and Eddie Cooper danced on stage voicing songs dripping in reverb, driven by drum machines.
Yet another night proving one of Iowa City’s immutable rules: Thursdays are for dancing.
I can’t say I knew this group prior to seeing them live. But I’m stuck on their album “New Meaning.” It’s full of darkwave sounds a la the Cocteau Twins and will be my getting-ready soundtrack for weeks to come.

GOOD MORNING MIDNIGHT


Making room for Iowa City musical excellence like Good Morning Midnight is certainly expected at Mission Creek. It’s also appreciated by me specifically. ⁠
The band’s singer, Charlie Cacciatore, has been the band leader for this act since 2016, and in that time, the band has leaned into a kind of midwestern edge. They bring a lyrical seriousness that’s in distress; they present problems that the songs want to sit with.
For those looking to dive into Good Morning Midnight’s music, Caccitore suggested starting with “Holy Ghost” from their newest album Songs of Violence (2021).

TRÉ BURT


There’s nothing I can write about Trè Burt that’d be prettier or more accessible than his music. He’s funny when he wants to be. He’ll ruin you when you’re not ready.
His 2022 single “Know Your Demons” — maybe a good starting point for you if you’re new to his music — comes complete with an R&B chorus and some fuzzy rock and roll bass on the record. But he kept things simple on stage. Just him wrapped around a small guitar.
On stage at the newly opened Riverside Theatre, he sang his 2020 song “Under the Devil’s Knee.” Reminiscent of documentary songwriting like “The Lonesome Death of Hattie Carroll,” it chronicles the lives and killings of George Floyd, Eric Garner and Breonna Taylor at the hands of police.
It wasn’t that long ago when the racial justice protests of 2020 filled the pedestrian mall. If you’re looking for it in town, you’ll still spot some of the spray paint, though much of it has been power washed away. The room was dead quiet, caught in Burt’s voice.
Check out his song “Tell Mary.” Then listen to the whole album.

RAMONA AND THE SOMETIMES


Des Moines-based Ramona and The Sometimes, led by Ramona Muse Lambert, came to the Riverside stage with cloth flowers blooming from their shoulders and sides. Whether dancing across the front of the stage or from her stool, Lambert’s good humor and earnestness were infectious. Her lyricism drifts towards a want to experience intimacy despite often bleak realities.
Take the 2022 single “Station Wagon.” Lambert presents images of the everyday: folded laundry or cereal boxes or making out in the back of a car — images that let us forget the climate disaster, “Like the world’s not burning, but it’s burning.”

FENNESZ


Not enough is said about live music’s head nods. Airy bops or thrash shakes: they’re a dance, something specific to the music and the body.
On Thursday night, Fennesz’s set pulsed with cinematic, arresting synth-scapes. And all around the stage, heads bowed familiarly, locked — though maybe unsure of the time signature.
Hearing something challenging could be alienating. But falling into a wave of nods, it makes the strange familiar.

BEACH BUNNY


This is music about a breakup. Or maybe a crush. Pop—even pop-punk—deals in drawing connections between the specific. Experiences of pain, love and moving on become recognizable, understandable and even shared.
This is the yearning energy Beach Bunny brought to the Englert Friday night. Though they were down the band’s guitarist, singer Lili Trifilio was undaunted: “You probably can’t do a lot of things because this is a seated venue, but we’re gonna try to have some fun.”
As the first song began, young crowd members rushed up the aisles to scream and jump with Trifilo, who led a set about hurt and self-worth.
While Hurt is specific, music abstracts it. Music makes it understandable, shared and damn fun to dance to.
“Fire Escapes” is a song I haven’t been able to get out of my daily playlist since it came out this year. But the band’s 2018 EP “Prom Queen” is a delight.

source

BIOMEDevice Boston Adds Exclusive Master Class Cybersecurity Series | mddionline.com – Medical Device and Diagnostics Industry

MD+DI Online is part of the Informa Markets Division of Informa PLC
This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC’s registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.
See All Markets »
See All Product Development »
See All Manufacturing »
See All Regulatory & Quality »
See All Technologies »
| Aug 23, 2022

An exclusive Master Class Cybersecurity Series headlines Day 2 of BIOMEDevice Boston, bringing together the most brilliant minds in medtech cybersecurity. This series will explore the necessary steps needed with cybersecurity when working in the medtech space and end with a special keynote open to all BIOMEDevice Boston attendees and exhibitors. This Master Class Conference pass is available exclusively with BIOMEDevice Boston, which is Sept. 28-29 at the Boston Convention & Event Center in Boston.
The Cybersecurity Series, presented by Velentium, takes place Sept. 29 and includes three unique Master Class sessions and one keynote detailing the importance of cybersecurity in relation to medtech organizations and products. Those who register for the Master Class Conference sessions will have access to both the Master Class Cybersecurity Series and the Master Class Start-Up Series.
The need for cybersecurity has become a necessity in the medtech landscape; according to Omnia Health, the surge in connected medical device adoption has seen the industry make a decade’s worth of progress practically overnight. The Master Class Cybersecurity sessions and keynote dive into how these crucial protective steps affect all areas of quality medical technology.
“We are very excited to partner with the BIOMEDevice Boston show to promote education and awareness for Embedded Cybersecurity,” said Ben Trombold, VP of Sales & Marketing at Velentium. “Product security has always been our passion. However, with the coordinated attacks and regulatory requirements increasing yearly, protecting medical devices and patients is more important now than ever. We look forward to working with everyone at the event and moving our industry forward.”
The Master Class Cybersecurity Series joins the Master Class Start-Up Series, presented by MassMedic, at BIOMEDevice Boston as part of multiple one-of-a-kind learning experiences under one roof. The Master Class Start-Up Series is Sept. 28 and explores the ever-changing medtech investment landscape, what it takes to mature alongside these trends, and garners an inside look at various funding vehicles – from strategics, to venture capital – and everything in between.
The sessions are held on the show floor toward the back of the conference center and the keynote is on Center Stage. The keynote is open to all who have an expo pass and a conference pass, plus exhibitors. Register here for a Master Class Conference Series pass for access to the Day 2 Master Class Cybersecurity Series sessions below, including the closing day keynote.
Master Class Cybersecurity Series, presented by Velentium:
“How to Align Your Development with the Latest FDA Expectations”
Presented by Christopher Gates, Director of Product Security at Velentium, 10:30 a.m.
This keynote dives into the latest FDA draft of requirements for cybersecurity in pre-market submissions. Christopher Gates goes over the new medical device cybersecurity laws and regulatory requirements and review all the new manufacturer’s activities expected by the FDA, including the expected 41 cybersecurity deliverables. Gates also details how to layer in the cybersecurity processes to development that will meet FDA requirements while minimizing cost burdens and development delays.

“Shifting Sands of Medical Device Cybersecurity Regulation: Past, Present and Future Implications from a Practitioner’s Perspective”
Presented by Garrett Schumacher, Senior Cybersecurity Engineer at Velentium, 11:30 a.m.
Garrett Schumacher uses this presentation to walk attendees through new and pending FDA regulations and how to secure their products, their business model, and their relationships with markets and regulators in the ever-evolving medtech market.

“Software Supply Chain Security Mitigations for Medical Device Development”
Presented by Christopher Gates, Director of Product Security at Velentium, 12:30 p.m.
In this presentation, Christopher Gates details the environment, risks, best practices and security mitigation tools available (including SBOMs) to secure their supply chain from cyber threats to their customers. With many medical devices involving computers, phones, apps and server applications, cybersecurity for clients has become a must.

Keynote: “Cybersecurity: Unworkable Today, Hope for Tomorrow”
Presented by Christopher Gates, Director of Product Security at Velentium, 1:30 p.m.
The closing keynote is open to all attendees and discusses one approach to leave behind the latest FDA draft guideline, which states 41 security artifact deliverables are required and mandates ongoing security testing activities for the life of medical devices. The approach Christopher Gates details aligns with the intent of regulatory standards, doesn’t require staffing up with expensive and hard-to-find embedded cybersecurity experts, and improves the overall speed of the development process.
More information about text formats
Follow us:

source

Watch live: President Biden speaks about federal student loan forgiveness and the payment pause – CNBC

Watch live: President Biden speaks about federal student loan forgiveness and the payment pause  CNBC
source

How To Mix Your Live Streaming Audio In A Daw

The Best MIDI Cables of 2022: The Only Ones You Should Think About Getting For Your Studio – Magnetic Magazine

MIDI cables are one of the music studio's most commonly used tools. They bring so much to the table and are so quintessential to our workflows as musicians that when they don't work as intended, our production sessions come to a screeching halt.
And between things moving around, wires getting crossed, and simple degradation of the MIDI cables over time, MIDI cables can stop working as intended, a bit more common than you might expect. At least if you try and cut corners by purchasing cheap cables.
But when it comes time actually to look into the best midi cables on the market, you are overwhelmed with options. Sow e did the heavy lifting, reviewing, and patching to find you the best MIDI cables of 2022.
So let's dive in…
You use MIDI, or Musical Instrument Digital Interface, cables to connect keyboards and electronic musical devices to computers. The MIDI cables are labeled as "In" and "Out" plugs, but they will not work if they are connected to electronic instrument ports that are labeled the same. 
This is because the data flow that the plugs show corresponds to the direction that data will go to the computer, not the port on the instrument that each cable must be connected to.
I highly recommend it to my friends and other artists as Monoprice is a reliable brand with excellent standards for the products they release. This standard-keyed 5-pin DIN connector allows you to sync up and connect almost all MIDI devices. This MIDI cord is an old standard compatible with MIDI-to-MIDI connections. The company that made this product also made sure it was RoHS compliant, so you know that it does not contain any environmental toxins.
I have been a musician and DJ for over seven years and have always used MonoPrice PA XLR wires for my live shows. They have never failed me and are of high quality. I have never had any grounding or shielding issues. I had 16 25-foot XLRs and two 30-foot XLRs before I bought three more.
If you have any problems, you can open them up and fix them. I had one bent, but that was because the person who helped me with my shoulder surgery didn't attach it correctly. I set it, and it's not a wiring problem but a personnel one. Save yourself money and headaches, and buy these for your live gigs.
Cable Matters is a brand known for its cables and related products. It offers a variety of threads and connectors, including MIDI cables, which provide excellent value for money. The Cable Matters MIDI cable can be a great pick if you are looking for multiple MIDI cables for all your MIDI controllers. This is because it comes as a pack of 2 cables, giving you a fantastic value for money. These cables are 5-pin to 5-pin cables, making them very versatile.
Each of these cables also has a length of 6 feet, which is the same as more premium options. Unlike other budget-friendly and entry-level options, this pack of MIDI cables offers a lifetime warranty for both of its MIDI cables, making them more reliable.
I've bought a few of these, and the cords are pretty thin. But I haven't had any problems after using them for a month. They fit well into the plugs, the shielding hasn't come off, and the MIDI information transfers reliably from one end to the other. The thin cables don't have that solid, chunky feel, but they work fine.
Snag Them Here
Roland
This Roland MIDI cable is a great way to connect your instrument to your PC. It has a single USB plug and two MIDI ports, so you can record audio from your instrument and use your computer as an output device. This lets you mix the audio in real-time and save your edits for later. I have used this with my Korg MS20 and Ableton, and it worked seamlessly.
This cable is powered by USB, so it doesn't require an external power source. This also works with iPads through the Apple iPad Camera Connection Kit. These two features make this product simply unique, freeing you from bulky computer equipment.
Snag It Here
LiDiVi
Lidivi is a newer brand than most other MIDI brands, so most of its offerings are more compatible with recent MIDI controllers, like the MIDI cable. Lividi's MIDI cable can be a good choice if you have a newer MIDI controller that uses USB connectors to your computer. This MIDI cable comes with a USB to 5-pin connector thanks to a built-in adapter and converter.
This MIDI cable is of premium quality and has a standard length of 6.5 feet. The build quality is quite sturdy, and you get a 1-year warranty, making it a long-lasting cable. I have several retroes, modern synth keyboards, and different DAWs.
I was always having trouble finding a USB / MIDI connector that would work well with any combination of synths and DAWs, but then I got this one. It's amazing! The USB / MIDI connection is always there when I need it. The only downside is that the cables look a bit flimsy.
Snag It Here
Amazon
Cable Matters offers a two-pack of MIDI cables perfect for building your studio or connecting a few synths and drum machines to one device. There is a lifetime warranty, too, so you're covered if you don't lose or accidentally damage it.
I have an MPC One as my main sequencer, and I wanted to connect a keyboard controller, control a midi cable to connect to my pedal, and sync my drum machine.
I chose to connect the keyboard and pedal to the drum machine's integrated MIDI ports and the Circuit with this cable interface so it could have in and out control. It works great, and in sync, the drum machine recognizes it right away, and you can assign the MIDI inputs and outputs per channel without any problems. This cable is well-built and long enough for my needs. The only downside is that the IN/OUT labels are just small pieces of tape that can easily fall off. I just put on better labels, and that solved the problem.
Snag Them Here
Amazon
DigitalLife produces various electronics products and accessories, such as the MIDI cables shown here, which can be an excellent option for those looking for something versatile.
DigitalLife's MIDI cable is an excellent option for those who need a versatile and reliable MIDI cable. This DigitalLife MIDI cable is a versatile option, thanks to its functionality and features. The best thing about this MIDI cable is that it uses USB type B to USB type C connectors, so it works with your computer and smartphone. For connecting your MIDI controller to either of these, you can use its 5.9 feet length. However, this Digitalife MIDI cable does not come with a warranty.
Snag Them Here
No matter if you're on stage or in a big studio, you need to be able to move around freely. That's where this top MIDI cable from Hosa comes in, with its 20-foot length. Plus, the company that made it is famous for their skill in making these audio cables.
This wire has extra-durable nickel-plated plugs, which also improve signal transmission. The rest of the cable is covered with a copper spiral shield to prevent electromagnetic and radio frequency interference.
Snag Them Here 
This cord is another option for recording audio from MIDI to your computer. It's a simple-to-install adapter, allowing you to use it immediately. It also works for Windows and Mac, so no matter what system you use, you won't have any problems.
The 5-pin connectors support input and output of up to 16 channels so you can run multiple audio parts from a single device. This gives you more creative license, allowing you to mix as many tracks as you wish.
This could allow just about anyone to start recording their electronic music on their computer, as it's one of the more inexpensive options in the market. It's a necessary device you need to start recording, mixing, and editing your audio. Plus, the included instruction sheet makes using the cable uncomplicated.
Snag Them Here
You will need a MIDI keyboard cable that connects directly to your iPhone or iPad if you want to use it with iOS 10.32 devices and up. This USB to Lightning MIDI cable is guaranteed to work and does not require any adapters or OTG cables.
This MIDI cable for the keyboard is made from materials optimized to deliver signals almost instantaneously while ensuring the highest possible audio quality. These materials are made from durable alloys and are lightweight, making the product portable and long-lasting.
I bought this cable to connect my Yamaha YDP-184 R Digital Piano to the iPad to improve note recognition using the Simply Piano app. The often suggested alternative setup is using a standard USB cable (B male to A male) connected to lighting to a USB camera adapter. However, having one cable instead of two does the job and works flawlessly. I highly recommend it.
Snag Them Here
The Roland Black Series MIDI Cable is perfect for those needing high-quality MIDI cables for their pedalboard, studio instruments, or other equipment. The connectors are made with commercial-grade nickel for superior signal quality, making them perfect for professional use.
This product also includes high-density shielding to prevent interference from other sources, making it ideal for running different synths in my tiny bedroom studio. You can use it on hardware, drum machines, laptops, modular synths, and more. I love using this on my Roland Fantom-06 and my Korg MS20.
I've tried out a bunch of different MIDI cables throughout the years, and the inexpensive ones always end up falling apart at the adapter end. These Roland black series are pretty solid and flexible interconnect – only time will tell, but I think they'll last for a while.
Snag Them Here
This makes it perfect for traveling musicians who want to take their music with them wherever they go. This MIDI cable is designed differently than other MIDI cables with USB to 5-pin connectors. It has internal adapters and connectors inside its USB housing, which makes it much smaller. Even though it is 6.5 feet long, it is compact and great for portable usage. Unfortunately, OTraki, a smaller brand of audio products, does not include any form of warranty with this MIDI cable.
The interface functioned adequately under Windows 10 on my machine and didn't necessitate any drivers beyond those that Windows automatically installed. The one slight issue of concern is the structural integrity of the design.
The USB connector is not level with the adapter's plastic body because the cable's weight has caused it to bend slightly. I wonder how long this product will last because of this. I am still happy with my purchase because it worked when I plugged it in.
Snag Them Here
Managing Editor at Magnetic Magazine – Former Marketing Manager at the Hyperbits Masterclass – Writer, Content Strategist, Music Producer, and Record Label Manager 

source

‹ Previous Next ›