PC Gamer is supported by its audience. When you purchase through links on our site, we may earn an affiliate commission. Here’s why you can trust us.
By published
There and back again.
Take Two’s publishing label Private Division has announced it is working with Wētā Workshop (opens in new tab), the production company that created the special effects in Peter Jackson’s Lord of the Rings trilogy, on a new game “set in the Middle-earth universe of J.R.R Tolkien.”
The game, which will be based upon the “literary works of the series”, is currently in early development, and is expected to launch during Take Two’s fiscal year 2024, although a specific release date has understandably not been announced.
Head of Private Division Michael Worosz said “We are thrilled to partner with Wētā Workshop to publish a game set in such an extraordinary and celebrated universe,” adding that “No entity is better equipped than the team at Wētā Workshop to create a distinctive, new Middle-earth gaming experience.”
There’s certainly some truth to that. Wētā Workshop has been regularly involved with many things Tolkien over the last two decades. Most notably, Wētā was behind the visual effects of Peter Jackson’s Lord of the Rings trilogy, which, if you’ve ever watched the Extended Edition’s DVD extras, involves some pretty incredible stuff, like the thousands of amazing costumes, and most of the films stunning “Bigatures” like the models for Rivendell and Minas Tirith. Wētā also worked on the less-well regarded (but still amazing-looking) Hobbit Trilogy, and more recently has been involved with Amazon’s hotly anticipated prequel series.
There’s very little information about what kind of game Wētā is making, but Wētā’s head of Interactive, Amie Wolken, offered a couple of tantalising titbits, stating “It’s a privilege to create a new game set in Middle-earth, especially one that’s so different from what fans have played previously.” Wolken further added “We’re excited for gamers to explore Middle-earth in a way they never had before.”
Combine that last statement with Wētā’s deep experience with Tolkien based world-building, and my guess is that is a LOTR open-world game, one that goes beyond the borders of Mordor as seen in Monolith’s “Shadow of (opens in new tab)” series. But that guess is only educated to primary-school level. It could be absolutely anything, from a Shire management sim to a Nazgûl kart-racer.
In any case, I’m extremely up for this. Monolith hasn’t been back to Mordor since 2017, instead working on its long in-development Wonder Woman (opens in new tab)game. There is that Gollum (opens in new tab)game from Daedalic Entertainment in the works, but our early impressions were mixed (opens in new tab), and it has also been delayed (opens in new tab). You can read the full announcment of Wētā’s new game here (opens in new tab).
Sign up to get the best content of the week, and great gaming deals, as picked by the editors.
Thank you for signing up to PC Gamer. You will receive a verification email shortly.
There was a problem. Please refresh the page and try again.
PC Gamer is part of Future US Inc, an international media group and leading digital publisher. Visit our corporate site (opens in new tab).
© Future US, Inc. Full 7th Floor, 130 West 42nd Street, New York, NY 10036.
A new Middle-earth game is in development by the studio behind the visual effects of Peter Jackson's Lord of the Rings trilogy – PC Gamer
Coming to terms with stability – Alaska Highway News
Sign In
Register
For Naomi Shore, things could not be better.
The Fort St. John-raised singer has just finished work on a new CD she hopes to release before the winter, has helped to launch a new live music production company, and the 34-year-old is in love.
Funny just how life can change, isn’t it?
In 2016, Shore saw her and Lindsay Pratt break-up Twin Peaks, a musical partnership of nine years.
It was also the year she would lose two people close to her, one of those, her ‘nana.’
She called it her six months of sadness, but it would eventually lead to her first solo album Piece by Piece.
Fast forward six years to today.
“I’m a fully domesticated adult woman,” admits Shore.
"I don’t live in a car anymore. I have house plants. I have a cat. I also just bought an area rug.”
Did we mention she’s in love?
Her new record is titled Stability.
“It’s really about, I think, coming to terms with, coming to grips with, the word ‘stability.’ It’s not a bad word. I can be stable and creative. I can be stable and be happy and successful,” says Shore.
“It has, what I would call, a lot of self-help songs. I’m not certain if there’s such a genre as self-help, but many of them were written as my own personal mantras. Like a therapeutic way to get through my feelings.”
Shore and new beau, Rose Prairie Romance lead singer /guitarist Ryan Sebastiano, shared some of the new material August 11 at Festival Plaza – their new business, responsible, too, for setting up other entertainment for the city’s new Music in the Park concert series.
The couple is also looking into an untapped market not seen in Fort St. John.
“We just bought a house and we’re considering putting on house concerts over the winter months,” says Shore.
“The realtor kept asking us – are we looking for a home or a concert venue?”
Stability is targeted for release in October.
Email your letters to [email protected]
© 2022 Alaska Highway News
Call for registration: Music Producer Empowerment workshop in Nigeria – Music In Africa
*Your language will be set using a browser cookie.
Don’t have an account? Sign up
Forgot your password?
Registration is currently ongoing for this year’s Music Producer Empowerment workshop in Lagos, Nigeria, on 20 August.
The initiative, put together by OY Productions, seeks to equip both emerging and established music producers with the necessary tools to navigate the industry.
The workshop will be facilitated by producer, sound engineer, music instructor, and OY Productions founder and CEO Odunayo Yusuf, who boasts many years of experience in the industry and is renowned for his work with artists like Olamide, Awilo Longomba, Patoranking, Stonebwoy and Wande Coal.
He will be joined by fellow producers Masterkraft and Rexie, music lawyer Akinyemi Ayinoluwa and a host of other industry experts who will take participants through music production, mixing and mastering. Attendees will also benefit from free sample packs and music equipment.
Speaking to Music In Africa, Yusuf said the workshop and activities designed around it were born from a “passion to see more music producers become successful and self-sufficient from their skills/creative gifts.”
He added that this year’s edition will build on the successes recorded in 2021, which allowed participants to elevate their music careers.
“The attendees are coming to learn from very experienced hands in the music industry,” Yusuf said. “Over time, you’ll realise the application of the lessons they will take home will affect their approach to music production and ultimately the quality of music that will fill our airwaves.”
On how he hopes initiatives like this will affect Nigeria’s music scene, Yusuf expressed a desire to see “a spark and encourage more people to take on similar initiatives or even approach me for a partnership to make it bigger because the vision requires input from more people.”
Registration for online attendance can be completed via this link until the eve of the event.
Sponsored
See all
Disclaimer: Music In Africa provides a platform for musicians and contributors to embed music and videos solely for promotional purposes. If any track or video embedded on this platform violates any copyrights please inform us immediately and we will take it down. Please read our Terms of Use for more.
New UK valuation study for EQ-5D quality of life questionnaire to start this year – NICE
Sophie Cooper, scientific adviser in NICE's Science, Policy and Research programme
The UK’s new valuation study for the EQ-5D-5L questionnaire, designed to understand how people prioritise different aspects of their quality of life, gets underway in October. The study is an important contribution to the evidence NICE uses to decide whether treatments offer good value.
The results of this study will allow better interpretation of the results of the EQ-5D-5L questionnaire, informed by up-to-date information about the public’s preferences.
Valuation studies gather the public’s views about which aspects of health matter the most to them. Those results create a ‘value set’ that converts people’s responses to quality of life questionnaires completed during clinical trials, into a number called a utility value. Utility values are used to inform many of NICE’s decisions about whether treatments provide good value for money.
NICE prefers to use utility values based on the EQ‑5D questionnaire developed by EuroQol, a registered non-profit foundation. The EQ-5D-5L is the latest version of the EQ-5D, with 5 response options. For example:
Please tick ONE box that best describes your health TODAY:
Pain/Discomfort
□ I have no pain or discomfort
□ I have slight pain or discomfort
□ I have moderate pain or discomfort
□ I have severe pain or discomfort
□ I have extreme pain or discomfort
Extract from EQ-5D-5L, © With permission of EuroQol Research Foundation.
In 2018 researchers published an EQ-5D-5L value set for England after interviewing around 1000 members of the general public. But independent quality assurance raised concerns about the reliability of the data collected in the valuation study, and the methods used to model these data. The English study was one of the first to be carried out anywhere in the world, and since then the international standard valuation study protocol has been improved and additional quality control methods introduced. Accordingly, NICE chose not to use the existing EQ-5D-5L value set for England, and recommended a new valuation study. If companies, academic groups or others preparing evidence submissions for NICE have used the EQ-5D-5L questionnaire to measure health-related quality of life, our methods state that this data should be ‘mapped’ onto the EQ-5D-3L value set.
Most valuation studies involve face-to-face interviews so, like many research studies around the world, it wasn’t safe to start the new study during the COVID-19 pandemic. But work didn’t stop altogether – the study team continued to work on the methods for study, which have now been approved, meaning that data collection will start in October 2022.
Valuation studies are challenging. The tasks are difficult and involve emotive subject matter – people are asked to think about their own death. So it’s important to get a good rapport between interviewer and participant, to ensure that participants understand and are engaged in the exercise. The pandemic raised the questions of how feasible and acceptable it is to do valuation interviews over videoconferencing software (such as Zoom), and whether doing interviews remotely would compromise the quality and accuracy of the results.
In 2021 the research team ran a study to formally compare the feasibility, acceptability and equivalence of using videoconference versus the traditional face-to-face approach in a valuation study (Rowen et al. 2022). The results showed that both approaches are feasible and acceptable, and generated good-quality data. An interesting finding was that the characteristics of people who preferred video interviews differed significantly from those who preferred face-to-face interviews. Therefore, both modes will be used in the UK valuation study, with participants being able to choose their preferred interviewing method, to make the study more inclusive and ensure the sample is representative of the UK population.
The new EQ-5D-5L valuation study is being funded by the EuroQol Research Foundation with ongoing advisory input from NICE, the Department of Health and Social Care, NHS England and NHS Improvement and academic experts. More detailed information about the study design and its governance can be found on the EuroQol website.
Rowen D, Mukuria C, Bray N et al. (2022) Assessing the comparative feasibility, acceptability and equivalence of videoconference interviews and face-to-face interviews using the time trade-off technique. Social Science and Medicine.
There are no comments
Read our comments and moderation policy
Revealed: Secret cameras record 50,000 Auckland drivers unlawfully using phones – Newstalk ZB
12AM – 5AM
Follow the podcast on
Cameras hidden around Auckland by a government agency have recorded the better part of 1000 drivers per day unlawfully using their phones behind the wheel, the Herald can reveal.
The cameras were installed at three secret spots by Waka Kotahi (NZ Transport Agency) as part of a six-month safety trial.
Police are not involved in the trial and the findings will not lead to enforcement action or warning letters, the agency said.
The findings for the first weeks of the trial, obtained by the Herald under the Official Information Act, revealed the shocking extent of illegal phone use – including texting – while driving in the Super City.
Last year, the total number of infringement notices issued by police for illegal use of mobile phones while driving was 40,976 nationally.
But the Waka Kotahi trial data shows there were 44,358 mobile phone use offences detected from May 24 to July 16 this year in Auckland alone, from a total of 3,662,024 vehicles travelling past the camera sites.
That works out as an average of 836 per day or 1.2 per cent of all cars.
A subsequent statement from Waka Kotahi following the Official Information release said a total of 50,333 “potential mobile phone use offences” were detected in the first two months, representing 1.14 per cent of the 4.4 million vehicles that travelled past the cameras.
On July 23, a function of the cameras allowing them to detect people not wearing seat belts was switched on. Initial seat belt data will be available next month, the statement said.
Waka Kotahi land transport director Kane Patena said the purpose of the trial was both to test the camera technology to ensure it was capable and to understand the scale of illegal phone use and seatbelt violations.
“We know that driver distraction is a contributing factor in nearly 8 per cent of all crashes where someone is killed, and approximately 90 people a year are killed on our roads because they didn’t wear a seatbelt,” he said.
“However, the scale of actual distracted driving and seatbelt non-compliance, in general, is mostly anecdotal.”
Patena said officials would undertake a full analysis at the end of the six-month trial.
“We are only two months into the trial, and no detailed analysis has been completed on the raw data. Decisions on the future use of this technology will be made following the completion of the trial and a detailed analysis of the results.”
The statement from Waka Kotahi said that to protect people’s privacy, drivers’ and passengers’ faces are not included in any stored image and number plates are automatically blurred.
Images, where no phone or seat belt offence is captured, are deleted “within minutes”, the statement said. Pictures showing an office are deleted within two days, Waka Kotahi said.
AA motoring affairs policy director Martin Glynn said the rate of texting drivers caught by the cameras still seemed low given the number of cars that passed the sites.
Glynn said the AA supported bigger fines for texting drivers as a way to improve safety on the roads.
In New Zealand, the penalty for using your phone behind the wheel is $150 and 20 demerit points.
“They’re very, very low by international standards,” Glynn said.
In Queensland, drivers can be fined $1078 AUD.
Statistics released last month show deaths on New Zealand’s roads are set to rise again.
The past two years saw lower tolls largely thought to be due to Covid-19 restrictions.
The figures, which were released alongside the Road to Zero Annual Monitoring Report 2021, showed the number of people dying on our roads is currently on track to be about 350-360.
According to the Ministry of Transport website, the provisional death toll as of yesterday stands at 225.
The total death toll on our roads in 2019 was 352.
In 2019, the Government proposed its new road safety strategy called Road to Zero, with the aim of cutting road deaths by 40 per cent during the next decade.
It followed Sweden’s Vision Zero strategy which seeks to eliminate road deaths.
– George Block, NZ Herald
D$ The Sax God Flies From The Shoulders Of… – New Haven Independent
by | Aug 16, 2022 8:45 am
Post a Comment | E-mail the Author
Posted to: Arts & Culture, Music
Brian Slattery Photo
Ben-Salhuddin.
“Jディラ(Love Dilla)” starts with a stately, old-school groove, straight out of the ’70s. Suddenly it’s chopped up, turned inside out. The tempo speeds up, the old sound made into something new. It becomes a vehicle for a rapper’s insistent voice. It’s a narrative about wrestling demons, about running out of time. “It doesn’t really matter in the end ’cause when it’s said and done / the only one who’s winning in the end is Father Time / I’m truly sorry if I ever had to take your son / I’d send you flowers with a note I wrote, it’s so sublime,” he raps, as the music cascades around him, lush and frantic. He drops out, and makes a drama of being allowed back in to rap some more — which is when the music really gets dramatic.
The lyrically and harmonically dense “Jディラ(Love Dilla)” is from Touchdown: Return of the King, a genre-bending new release coming out Aug. 18 on all platforms from Damani Ben-Salhuddin, a.k.a. D$ the Sax God. In its searching, urgent tone, the album marks the arrival of an artist as comfortable in a jazz mode as he is in a hip hop mode, and particularly agile in exploring the spaces in between, around, and beyond them. But the sound can also be understood as the culmination of being raised in New Haven, and being a part of the network of music education opportunities the Elm City has to offer.
Ben-Salhuddin, who is 22, grew up in New Haven and began playing music as a child, first keyboards, then drums. Then “I started playing sax because I saw some dude with a blue sax — shoutout to that blue sax dude, I forget your name — but … he was a little older than me.” Ben-Salhuddin listened to his playing and decided he needed a saxophone too, “even if it wasn’t blue.” He picked up flute as well. He attended Worthington Hooker School and joined Music Haven in 2008, where he learned to play violin. He got into Co-op High, where his brother had gone as well, and specialized in music.
“That was my thing,” he said. “Every single morning of every single day, we would play scales. Shoutout to Patrick Smith — he was my teacher. For 45 minutes we had to play scales, so I definitely put in my 10,000 hours.” He learned from Jesse Hameen II and the surrounding musicians in the jazz program at Neighborhood Music School, whom he called “silent killers” — people with heavy jazz skills who were also friendly and approachable. While in high school he also reached out to West Coast trombonist Ryan Porter for help arranging one of contemporary jazz great Kamasi Washington’s compositions and now thinks of Porter as a mentor.
After graduating Co-op High, Ben-Salhuddin spent a year at UConn, where he was a member of the school’s jazz ensemble and had a chance to meet Chick Corea. He then applied and got in to Berklee College of Music in Boston, concentrating in music production and engineering. “At first I liked it but then the pandemic hit, and it really changed everything. The entire atmosphere is different.” So he returned to New Haven, hunkered down, and kept making music.
Last year Ben-Salhuddin recorded an album called DRUGS — which stands for “dat real unregulated gangsta shit,” he explained — or WITL, which stands for “a week in the life.” It took about a week for him to make. “Every day I recorded a song and I’d mix it, master it, and drop it,” he said. “It was a good way to archive and see my progress, how my week was going, see my moods and what was going on in my life.” The album let him “sit back and analyze, really put myself in those situations and those days. I really figured something out by the end.”
A post shared by Damani (@dbsln_)
As pandemic restrictions lifted, he started getting out to play music again (see above for a snippet of a recent solo set at Stella Blues). He also reconnected with musicians here. This past weekend was a case in point; he played at Orchid Café’s jazz brunch in a group headed up by trumpeter William Fluker, playing a soprano sax he borrowed from New Haven musician Will Cleary. “I knew him when I was a little kid, and then we reconnected all these years later and it was like we never missed a day,” he said.
About a year and a half ago, Ben-Salhuddin started making hip hop, developing a style as a rapper and producer in accordance with his own sensibilities. “I was always a jazz head,” he said. “I haven’t really listened to the Tupacs and the Biggies — not in an active way.” Instead, “Kendrick Lamar was my first real introduction” to hip hop, along with Tyler the Creator, “one of my favorite artists.” He recalled Lamar’s To Pimp a Butterfly coming out in 2015, when he was high school, and “it was my album of the summer.”
“I got a lot of influences,” Ben-Salhuddin said, which means his own music tends to be harmonically and lyrically dense. He makes the beats first, a practice he has grown to love. “I’ll make them in my room, I’ll make them on the bus, outside, roll up onto the roof and make beats. I’ll make beats anywhere. I’ll make one right now. Whenever you get inspiration.”
In coming up with raps to lay over the tops of his grooves, he tries to rap “like a jazz instrumentalist” improvising, finding the holes in the music and filling them with words. “I have a song called ‘Changes,’ ” he said, “because it changes every time you play it.” Music and words are written in the moment — “I’ll sit down and write a verse in 5 or 10 minutes,” he said, then record it right away — and gives himself permission to change it over time. “Nobody can steal your melodies if your melodies are always going to change,” he said. He recalled asking Chick Corea what he thought about songs without melodies. “A song without a melody?” he recalled Corea answering. “Well, that’s not a song.”
“But that’s what I do all the time,” Ben-Salhuddin added with a laugh.
The foray into hip hop has given him a chance to further hone his skills, as someone who likes trying something new, figuring things out. “If you give me something, I’ll either figure out how to use it, or break it and turn it into something I need.” At the same time, he has grown uneasy with the labels of “jazz” and “hip hop” to describe the music he’s making.
“I know this generation oftentimes says ‘I don’t like to be put in a box,’ ” he said, “but for a generation that says that, they put themselves in a lot of categories and boxes — we’re this and we’re that,” from music to identity politics. “It’s just boxes at the end of the day. So I really don’t like to put myself in a box, especially musically. Which I know sounds like a cliche, but it’s true.”
Maybe that’s why Touchdown: Return of the King, with its urgency and ricocheting ideas, feels like a turning point in Ben-Salhuddin’s musical evolution. In writing it, he found that it “was really just about my life. It was my whole entire life boiled down into some music. Everything I’ve been going through and how I feel,” he said.
But it’s also about the present moment he’s in. “That’s how my music comes together. It’s always very spontaneous. I never plan. At the end of the day you got to roll with the punches.”
Ben-Salhuddin is already eager to release more new music, and possibly to form a band of his own. “Time waits for no man,” he said. “Which is a theme, I think, in the album.… You can’t trust or think that you have any amount of time. Time is something that is a gift.” That stance has given him some perspective on what it means to finish a project, even if the way he works allows for the possibility of always changing it, always returning.
“I love to leave a project as is,” he said. “At a certain point you’ve got to stop tinkering, or you just keep working on it and it’s never gonna be right. At a certain point, you got to stop, sit back, and think, ‘yeah, this shit is fire.” Then, he added, “move to the next thing. You got to move to the next thing. You got to move and try not to pass away early.”
Touchdown: Return of the King comes out on Aug. 18 on all platforms. Check D$ the Sax God’s SoundCloud page for previews of the album and past musical projects.
Don’t want to miss a single Independent article? Sign up for our daily email newsletter! Click here for more info.
Share this story with others.
Be the first to comment
Resident reports that recycling was missed.
©2005 – 2022 New Haven Independent
site: smartpilldesign
$9.8M in construction financing secured for JC multifamily development – NJBIZ
A link has been emailed to you – check your inbox.
Rendering for One Mallory. – JLL CAPITAL MARKETS
A new luxury housing development that will bring 44 units to Jersey City’s West Side secured $9.78 million in construction financing, JLL Capital Markets announced Aug. 12.
One Mallory will house a mix of studio, one- and two-bedroom units across seven stories at 70 Fisk St.
JLL represented the borrower, 70 Fisk LLC, to secure a 2.5-year, floating-rate construction loan through Spencer Savings Bank.
The project is scheduled for completion in spring 2024.
The JLL Capital Markets Debt Advisory team representing the borrower was led by Director Max Custer and Senior Director Thomas Didio Jr.
Inside, units will feature gourmet kitchens, quartz countertops, subway tile backsplashes, wood plank-style flooring, in-unit washers and dryers, stylish tiled bathrooms, stainless steel appliances and some private terraces. According to JLL, amenities will include an 1,800-square-foot rooftop deck with lounge seating and scenic city views, a modern fitness center, an oversized resident lounge with televisions and a wet bar, a secure package room, electric car charging stations, bike storage and covered parking for 22 vehicles.
“Jersey City’s West Side has shown exciting momentum over the last 24 months or so with several new projects breaking ground or being completed,” Custer said in a statement. “One Mallory will undoubtedly be a fantastic addition to this quickly evolving neighborhood.”
More Latest Headlines
August 15, 2022
More from This Week’s Issue
© 2022 BridgeTower Media. All information on this site is copyrighted by BridgeTower Media.
All images are the sole property of BridgeTower Media and no rights are granted for any use without the express written consent of BridgeTower Media.
Decontamination of actual radioactive wastewater containing 137Cs using bentonite as a natural adsorbent: equilibrium, kinetics, and thermodynamic studies | Scientific Reports – Nature.com
Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 13837 (2022)
Metrics details
Batch adsorption treatment using Iraqi bentonite as a natural adsorbent was adopted in this study to decontaminate actual 137Cs radioactive wastewater from the Al-Tuwaitha Nuclear Research Center, located south of Baghdad. The bentonite characterization was applied before and after treatment, using chemical compositions analyses, X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), Brunauer–Emmett–Teller (BET) surface area analysis and Fourier-transform infrared spectroscopy (FT-IR). The batch adsorption mode was applied with the initial radioactivity concentration (1440.5 Bq/L), solid/liquid ratio (1 g/L), pH (6–8), contact time (1.5 h), and temperature (298°K). The adsorption experiments showed a decontamination removal efficiency of about 95.66% of 137Cs. A Freundlich adsorption isotherm model was approved for the adsorption of 137Cs, with a coefficient of determination R2 = 0.998. A pseudo-second-order model fitted well with the adsorption of 137Cs, with R2 = 0.983. The positive value of ΔH° in the thermodynamic results indicated that the adsorption process was endothermic physisorption (ΔH° = 15.01 kJ mol−1), spontaneous and favorable (ΔG° = −7.66 kJ mol−1 K−1), with a very low degree of disorder (ΔS° = 0.076 kJ mol−1 K−1).
Radioactive wastewater is one of the most potentially dangerous pollutants that is generated from nuclear energy stations, medical nuclear applications, and various extractive industries worldwide. This radiation risks devastating the environment and living organisms because it is easily absorbed by soils and living creatures1. Since 1991, a great amount of liquid waste polluted with cesium (137Cs) has accumulated underneath the Al-Tuwaitha Nuclear Research Center, located near the city of Baghdad, Iraq2. 137Cs causes significant concern due to its gamma radiation, high solubility in liquid, half-life of 30 years, and its ability to cause serious harm to all living organisms. Accordingly, 137Cs contamination must be reduced to a safe limit to avoid the impacts of any leakage, both natural and industrial. The radioactivity of 137Cs (a long-lived radionuclide) wastewater can be minimized by selecting appropriate remediation. Various remediation methods have been utilized for the decontamination of 137Cs, such as evaporation, chemical precipitation, adsorption, solvent extraction, and filtration3. To remediate isotope substances in wastewater, adsorption is one of the most efficient methods, which is also simple in application and low in cost4,5,6. Bentonite is the most suitable clay used as a buffer and backfill material that is part of a significant group of natural materials mostly composed of fine-grained particles of minerals7,8. It is estimated to protect the surrounding environment from contamination with radionuclides due to its high swelling capacity and ability to adsorb cations on its negatively charged surface9,10,11. Various studies have compared bentonite and other clay minerals (e.g., illite, vermiculite, kaolinite, and palygorskite) on their adsorption efficiency, adsorption capacity, kinetics, isotherms, and parameters’ effects on the adsorption of cesium12,13,14. Additionally, the comparison studies involved modified and pillared bentonite. Moreover, bentonite is used with other materials as an adsorbent in many investigations, including zeolites, activated carbon, and biosorbents15,16,17. Briefly, in all cases (i.e., raw, modified, pillared, and hybrid), bentonite has displayed excellent adsorption of 137Cs such that for availability, inexpensive cost, and simple application, raw bentonite can be employed without any physical or chemical pretreatment18.
In this study, there are two main features that distinguish it from other similar ones. The first of these is that the Cs-137 radioactive liquid used in the research is different due to the properties it contains. The second is that the natural bentonite used is specific to a site. Iraqi raw bentonite was investigated as an adsorbent for the uptake of 137Cs from contaminated liquid at the Al-Tuwaitha site. Bentonite was characterized using chemical composition analyses, X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), scanning electron microscopy (SEM), particle size distribution, surface area, and Fourier-transform infrared (FT-IR) spectroscopy. Investigations studied the removal efficiency% of the effects of adsorption parameters, such as the adsorbent/liquid ratio, pH, sorbate concentration, contact time, and temperature. Additionally, evaluations were conducted of the influence of the adsorption capacity on the kinetic mechanisms, isotherm models, and thermodynamics.
The source of the radioactive waste of Cs-137 is back to the previous activities of the Al-Tuwaitha nuclear site which was attacked during the Gulf war in 1990 and 2003. This radioactive wastewater contains in addition to the 137Cs traces of different types of short half-life radionuclides. All samples were measured and analyzed using gamma spectrometry analysis system with a closed end, coaxial, p-type model GEM65P4-95/ORTEC as shown in Fig. 1, which consists of a 65% relative efficiency of High purity germanium detector (HPGe), with the advanced gamma vision software. The energy and efficiency of the measuring system were calibrated using a multi-energy measuring source (MGS5.1045), using special containers for sec 3600. The dominant radionuclide of (137Cs) was measured at the energy of 661 keV. The specific activity of 137Cs for the stock liquid was 4.5 MBq/L, which was calculated using the below equation19:
Gamma spectrometry technique of HPGe detector.
where A: specific activity in units (Bq/L). B.G: Back ground. V: the volume of the model. eff%: The percentage of efficiency. ({mathrm{I}}gamma %) : Intensity of gamma rays. t: the measurement time.
The contaminated liquid was diluted to a safe limit of about 7201.8 Bq/L. Analytical solutions of HCl and NaOH were used to regulate the pH of the 137Cs solutions for batch experiments using a gamma spectroscopy system HPGe detector. The total samples numbers are 25, and the experiment was repeated two times for each sample.
A bentonite clay sample was supplied from a deposit in Wadi Bashira of the Western Desert (Iraq). The clay sample was crushed by a jaw crusher (Retsch BB 1, Germany), then milled in a rotating cylinder ball mill and sieved in a 75-micron sieve opening. Bentonite clay was used without any physical or chemical pretreatment. Chemical wet analyses were carried out on bentonite to identify the composition of the contents by the Iraqi Geological Survey Laboratories. Mineralogical analyses were inspected using the Ital structure model MPD 3000. A MIRA3 TESCAN high-resolution analytical scanning electron microscope (SEM) with EDX was used to investigate the bentonite’s morphology. The particle size distribution analyses were accomplished by Brookhaven Instruments. The specific surface area (SSA) and the cation exchange capacity (CEC) for bentonite were obtained from technical reports of the Iraqi Geological Survey20. FT-IR analysis was conducted by ultraviolet and visible absorption spectrophotometer by a Bomem MB-Series FT-IR spectrometer according to ASTM E 1252–98.
The batch adsorption mode was applied using 50 ml of 137Cs solutions with different radioactive concentrations (1440.4–7201.8 Bq/L) and five pH values (i.e., 2, 4, 6, 8, and 10). Bentonite was added with various solid/liquid (S/L) ratios (0.5–2.5 g/L) in glass containers. The mixtures were combined using a shaking water bath at 200 rpm and at different bath temperatures (25–50 °C). At the end of the mixing times (which varied from 0.5 to 3 h), the samples were filtered using a 0.45-micron Whatman™ filter, and the radioactivity concentrations (specific activity Bq/kg) of 137Cs in the filtrates were assayed by an HPGe detector. The concentrations of 137Cs (µg/L) in the filtrates were estimated using Eqs. (1)–(4)21.
where λ is the radioisotope decay constant (s−1), Aav is the Avogadro’s number (6.02 × 1023 nuclei/mol), w is the weight (g), and M is the atomic weight (g/mol).
where (v) is the volume of sample (L).
The removal efficiency (R%) and adsorption capacity (qe) in (mg/g), were determined using Eqs. (5) and (6), respectively22,23:
where Co and Ce are the initial and equilibrium concentrations of radioactive cesium (Bq/L), respectively; V is the volume of the solution (L); and M is the weight of the clay mineral materials (g).
Various types of adsorption isotherms models are mentioned in the literature, and the most remarkable ones have proceeded as linearized isotherm forms of either the Langmuir (Eq. 7), Freundlich (Eq. 8), Temkin (Eq. 9), or Hill (Eq. 10) models24. The adsorption isotherm rule at equilibrium presents the relationship between the adsorbent concentration and ion concentration in solution as follows:
where Ce is the activity concentration of cesium alone in solute (mg/L), qe is the adsorbed material on the adsorbent surface (mg/g), qmax is the maximum monolayer capacity (mg/g), and b is the Langmuir constant (L/g).
where Kf is the Freundlich constant (mg/g) (which approximately indicates the adsorption capacity), and 1/n is the intensity of adsorption (which evaluates the adsorption process).
where b is the isotherm Temkin constant (which is related to the adsorption temperature), A is the binding constant of the equilibrium (L/g), R is the ideal gas constant (8.314 j/mol. K), and T is the absolute temperature (°K).
where nh Hill cooperativity coefficient of the binding interaction, ({q}_{sh}) and KD Hill isotherm constant. Furthermore, in this model if nh =1 that means the binding is hyperbolic or non-cooperative, if nh > 1, binding has positive cooperativity, while negative cooperativity occurs when nh < 1.
The mechanism of 137Cs adsorption on bentonite surfaces was evaluated by using the data resulting from the effect of contact time. The evaluation is based on the application of three kinetic adsorption linearized models: pseudo-first-order (Lagergren model), pseudo-second-order (Ho model), and intraparticle diffusion (Weber-Morris model), which are represented by Eqs. (11), (12), and (13), respectively25.
where qt and qe are the adsorption capacity (mg/g) at time t (min) and at equilibrium, respectively; K1 and K2 are pseudo-first order (min−1) and pseudo-second order (g/mg min) adsorption rate constants, respectively; KP is the constant of the intraparticle diffusion rate (mg/g min0.5); and C is the constant of the intraparticle diffusion.
Thermodynamic studies were conducted by evaluating the physicochemical properties and thermochemical nature of Cs adsorption onto bentonite. Kc values were estimated by Eq. (14) for different temperatures (i.e., 25, 35, 40, 45 and 50 °C), and different values of ΔG°. ΔH° and ΔS° values for these temperatures were estimated from equating Eqs. (15) and (16) to generate Eq. (17), which is called van’t Hoff model26.
where Kc is the equilibrium constant, R is the ideal gas constant (8.314 J/mol. K), T is the absolute temperature (°K), ΔG° is the adsorption Gibbs free energy change (kJ/mol), ΔH° is the adsorption free enthalpy change (kJ/mol), and ΔS° is the adsorption free entropy change (kJ/mol K).
The results of the chemical and mineralogical analyses (shown in Table 1 and Fig. 2) indicated that the applied bentonite type was low-grade bentonite ore. There was a high content of impurities of major minerals (e.g., silica, calcite, and gypsum) as displayed in Fig. 2, while the clay minerals, (Ca, Mg and Na montmorillonites) were present as minor minerals. The bentonite had not been previously purified or modified, which is clearly shown in these results.
XRD pattern of Bentonite clay.
Scanning electron microscopy (SEM) images for bentonite are shown in Fig. 3. The SEM showed the morphology of the bentonite structure before adsorption, as shown in Fig. 3a, with a fine and close plate-like shape structure. In contrast, after adsorption (Fig. 3b), the layered structure was disordered, and the particles were almost flat.
SEM image for Bentonite clay (A) Before adsorption (B) After adsorption.
Energy-dispersive x-ray analysis (EDX) was achieved at point (a) on the bentonite surface after adsorption, as shown in Fig. 3b. The EDX spectrum detects the presence of 137Cs by Lα and Lβ in the range of 4–5 keV (see Fig. 4). The quantitative analysis at the same point indicates the main composition percentage of bentonite clay and the loaded 137Cs.
EDAX analysis of Bentonite after adsorption.
The particle size of bentonite was investigated using a Brookhaven NanoBrook 90Plus particle size analyzer, which uses dynamic light scattering (DLS) principles. The mean particle size of the bentonite is presented in Fig. 5. It was found that the 30.9 nm particle had the highest intensity value, with the specific surface area of bentonite listed in Table 2.
The particle size distribution of Bentonite clay.
Montmorillonite (smectite) has a 2:1-layer structure consisting of an octahedral alumina sheet sandwiched between two opposing tetrahedral silica sheets. FT-IR spectra of bentonite before and after the cesium adsorption process were measured to investigate the structural changes. However, the spectrum of bentonite before the adsorption in Fig. 6b showed the following bands: a stretching vibration Al–OH/OH, bending vibration H–OH, stretching vibration Si–O–Si, and a stretching vibration Al–OH–Al at 3421, 1636, 1026/776, and 912 cm−1, respectively. Figure 6a shows the spectrum after the cesium adsorption, with a slight shift towards a higher frequency on the Al–OH–Al band than in the raw bentonite (from 3421 to 3427 cm−1)27.
FTIR Bentonite clay (a) before adsorption (b) after adsorption.
The effect of the solid/liquid (S/L) ratio on the adsorption of 137Cs is shown in Fig. 7. The bentonite dosage was 0.5, 1, 1.5, 2, and 2.5 g/L of contaminated liquid with all other parameters remaining constant. The removal of cesium increased as the ratio of bentonite to liquid rose. The removal of 137Cs at bentonite amounts greater than 1 g/L remained almost constant. Thus, the equilibrium (1 g/L) ratio was considered to be the optimal dose, with an adsorption removal of 95.66%. Wu et al. (2009)26 studied the adsorption rate of Cs+ by changing the liquid/solid ratio from 1000:1 mL/g to 50:1 mL/g, which decreased the adsorption rate from 63.5 to 98.0%. This can be explained by the fact that the odds of Cs+ colliding on the surface of the montmorillonite increased with additional adsorbent active sites. The increase in adsorbent amounts meant an increase in the surface area and the number of active sites of adsorbent surface exposed for ion exchange, as found by Abou-Lilah et al. (2020)27.
Effect of solid/liquid on the removal of Cs137 by Bentonite at room temperature, t = 1 h., Co = 0.5 μg/L and pH = 6.
The investigation of the initial pH effect on the 137Cs adsorption removal by bentonite is depicted in Fig. 8. The uptake of 137Cs from wastewater occurred at higher pH levels (6–7), while it decreased as the acidity increased from 6 to 4 and the alkalinity increased from 8 to 10. This result can be explained due to the negative electrostatic charge of the natural bentonite clay sheet surfaces, which attracts the positive charge of the 137Cs to its surface to encourage ion exchange. When the acidity increased, the H+ ions increased, competing with the 137Cs ions on the surface of the clay. On the other hand, the high alkalinity creates cesium complexes, such as Cs (OH2)−, which are repulsed by the surface and force the cesium to desorption. This result agrees with the conclusion of the pH investigation by Galambos et al. (2010), which indicated that the adsorption percentage approaching 97% was reached at pH levels between 6 and 8. Therefore, for maximum Cs-adsorption, the disposal of high-level radioactive wastewater should be carried out at a pH of 728.
Effect of initial pH on the removal of Cs137 by Bentonite at room temperature, t = 1 h., Co = 0.5 μg/L and solid/liquid = 1.5 g/L.
The influence of contact time on the 137Cs uptake percent from wastewater using bentonite is plotted in Fig. 9a. The adsorption quickly increased in the first 30 min and reached equilibrium at 1.5 h, with a removal % of 95.66%. The effect of contact time on the 137Cs adsorption using raw bentonites has been studied29,30. The faster 137Cs uptake percent was associated with the initial presence of many empty active sites for adsorption on the clay surfaces. Then, with increasing contact time, the uptake percent gradually increased because most active sites were already occupied and remained in that condition until equilibrium was reached, when all active site became vacant31,32. Kinetic models were employed to simulate the experimental data in the contact time study in relation to the adsorption capacity (qt). The linear forms of the pseudo-first-order model (Eq. 11), pseudo-second-order model (Eq. 12), and intraparticle diffusion model (Eq. 13) are plotted in Fig. 9b–d, respectively. For further discussion, the kinetic characteristics were estimated from the slopes and intercepts of these linear models and tabulated in Table 2. The pseudo-first and second-order models have a good fit to the 137Cs adsorption mechanism, with high regression coefficients (R2) of 0.983 and 0.978, respectively. The theoretical amount of 137Cs adsorbed at equilibrium qe suggested by the pseudo-first-order model was about 2.36 × 10−6 mg/g, which was closer to the experimental qe of about 2.15 × 10−6 mg/g than that of the pseudo-second-order model, which was approximately 2.54 × 10−6 mg/g, as shown in Table 3. Although there is only a small difference in the qe between the first- and second-order models, the regression coefficient R2 best fits the second-order models.
(a) Effect of contact time on the removal of Cs137 (b) pseudo first-order adsorption kinetic model (c) pseudo second-order adsorption kinetic model d: intra-particle diffusion adsorption kinetic model by Bentonite at room temperature, pH = 6, Co = 0.5 μg/L and solid/liquid = 1.5 g/L.
The intraparticle diffusion model does not fit with the experimental data because the regression coefficient R2 had a low value (0.757), indicating poor diffusion and that adsorption mainly occurred on the surface. The kinetics of 137Cs of adsorption fitted with the pseudo-second-order model, meaning that the controlling mechanism step was ion-exchange by electrostatic interactions, which played a key role. Most of the previous studies on ion adsorption on clays were represented by the pseudo-second-order kinetic model32,33,34. Film diffusion can be considered the rate-controlling step if the adsorption process is marked by inefficient mixing, small solute size, and low concentration; otherwise, intraparticle diffusion controls the process.
This study investigated the effects of the initial concentrations of adsorbate on the amount of Cs+ ions sorbed onto the surface of the clay, finding that increasing the initial adsorbate concentrations caused an increase in the equilibrium concentration. Thus, the amount of 137Cs isotope sorbed onto the surface of the clay increased, as illustrated in Fig. 10. The adsorption isotherm illustrates the adsorption situation at equilibrium and reveals the influence of the adsorbate ion concentration in the bulk solution on the total adsorbed amount. Figure 11a–d clarify the application of the linear form of either the Langmuir (Eq. 7), Freundlich (Eq. 8), or Temkin (Eq. 9), Hill (Eq. 10) adsorption isotherms of 137Cs. To verify the experimental data, the correlation coefficient parameters of these isotherms was estimated from the slopes and intercepts of linearization, as shown in Table 4. From the obtained correlation coefficient (R2) values for these models, it was evident that the isotherm model’s applicability for cesium removal using raw bentonite follows this order: Freundlich > Langmuir > Temkin > Hill, as shown in Table 4. The R2 value was greater than 0.99 for both the Langmuir and Freundlich isotherm models, making them more suitable to elucidate the adsorption isotherm of the adsorbed ions than the Temkin model, with R2 = 0.963. While Hill model with nh = 4.5 > 1 indicate that positive cooperative adsorption, this mean influencing of other binding sites on the same adsorbent, but the data did not fit with Hills model at R2 = 0.73635. Depending on the comparison between the correlation coefficient parameters of the isotherm models, for the Langmuir model, the maximum monolayer adsorption capacity qmax was 5.18E-6 mg/g and RL (the dimensionless equilibrium parameter value) was close to 0.058. An RL value in the range from 0–1 indicates that the adsorption process is favorable. However, in the Freundlich model, the adsorption intensity constant (n) was 1.28, which indicates moderate adsorption, whereas, for good adsorption, the (n) value must range from 2 to 1036.
Effect of Cs137 concentrations on the amount of Cs+ ions adsorbed.
(a) Langmuir adsorption isotherm (b) Freundlich adsorption isotherm (c) Temkin adsorption isotherm (d) Hill adsorption isotherm .by Bentonite at room temperature, pH = 6, t = 1 h., and solid/liquid = 1.5 g/L.
These favorable characteristics support the validity of using the Langmuir adsorption isotherm model. The adsorption by raw bentonite is monolayered sorption predominantly on distinct localized adsorption sites, with no transmigration of the adsorbate in the plane of the surfaces and assumes uniform energies of monolayer sorption onto the adsorbent surface, which was also concluded for the adsorption by raw bentonite by Abou-Lailah et al. (2020)27 and Balouch et al. (2013)37.
The effect of temperature on 137Cs adsorption is shown in Fig. 12a, which indicates that 137Cs removal increased slightly with the increasing temperature of the adsorption process from 298–323°K. Gibbs free energy (ΔG°), enthalpy (ΔH°), and entropy (ΔS°) provide an evaluation of the adsorption process spontaneity, the adsorption process nature, and the applicability of the adsorbent, respectively. The equilibrium constant (Kc) was determined from Eq. (14), while ΔH° and ΔS° were evaluated from the slope and intercept of a graph of Ln Kc versus 1/T (van’t Hoff), as illustrated in Fig. 12b. The thermodynamic parameters for 137Cs adsorption are listed in Table 5.
(a) Effect of Temperature on the removal of Cs137. (b) (Van’t Hoff) relation adsorption by Bentonite, pH = 6, Co = 0.5 μg/L, t = 1 h. and solid/liquid = 1.5 g/L.
The negative value of ΔG° confirms the spontaneous nature of the adsorption process. The values of ΔG° (−7.66 kJ/mol) indicated that the process of physisorption had occurred, as values of ΔG° for the physisorption process are generally between 20 and 0 kJ/mol. The positive value of ΔH° (15.01 kJ/mol) confirmed the endothermic nature of the process. The positive value of ΔS° (0.076 kJ/mol/°K) signified that randomness among the solid–liquid interfaces in the bulk solution had increased during adsorption equilibrium38,39. The numerical value of ΔH° supplies the type of sorption features, such that if the ΔH° value is from 2–21 kJ/mol, the adsorption process is physisorption, but if it ranges from 80–400 kJ/mol, it is chemisorption40. Based on the range of the ΔH° value, the 137Cs adsorption occurred using an ion-exchange mechanism41.
The optimum equilibrated conditions resulting from the batch adsorption experiments were a solid:liquid ratio of 1 g/L, pH (6–8), initial cesium activity concentration (7201.8 Bq/L), contact time (1.5 h), and temperature (298°K). The adsorption efficiency achieved about 95.66% at the optimum condition. The results of this study were compared with some previous studies using the same approach. The batch adsorption conditions are listed in Table 6. The results of this study are similar to the adsorption efficiency of bentonite found in other studies42. Also, the Langmuir isotherm fit with an adsorption isotherm of 137Cs mentioned by43. It should be noted that the raw bentonite in this study was untreated or modified.
Iraqi raw bentonite without any pretreatments successfully decontaminated 137Cs from the Al-Tuwaitha radioactive wastewater by batch adsorption. The adsorption experiments indicated that about 95.66% of 137Cs was decontaminated under the following conditions: initial activity concentration (1440.5 Bq/L), solid:liquid ratio (1 g/L), pH (6–8), contact time (1.5 h), and temperature (298°K). The adsorption in this 137Cs isotherm study proved the validity of using the Langmuir adsorption isotherm model. The kinetics of the adsorption of 137Cs fitted with a pseudo-second-order model, meaning that the controlling mechanism step was ion-exchange by electrostatic interactions on the bentonite clay surface. The positive value of ΔH° in the thermodynamic study confirmed the endothermic nature of the process. The ΔH° range value indicated that 137Cs adsorption was physisorption and used an ion-exchange mechanism. These results support the notion that batch adsorption with raw bentonite is beneficial for several reasons, including its high efficiency, simple application, low cost, and use of eco-friendly material. Additionally, this study provides useful information about the adsorption process to develop a suitable continuous method for radioactive wastewater treatment. Finally, the adsorption technique minimizes the volume of one liter of radioactive wastewater to the volume of one gram of loaded bentonite, which can be easily sequestered in a landfill after suitable cementation.
All data generated or analyzed during this study are included in this published article.
T. S. and D. Registry, ToxProfiles 2008: Including ToxFAQs and Public Health Statements, U.S Dept. of Health and Human Services, Public Health Service, Agency for Toxic Substances and Disease Registry, Division of Toxicology, Atlanta, GA, (2008). 34. J. S.
Abdulameer, O., Al-Alawy, I. Radiological Characterization and Safety Assessment of Destroyed Nuclear Facilities at Al-Tuwaitha Nuclear Site in Iraq 2019.
International Atomic Energy Agency. Review of the Factors Affecting the Selection and Implementation of Waste Management Technologies; IAEA-TECDOC-1096 (IAEA, 1999).
Google Scholar
Liang, T. & Hsu, C. Sorption of cesium and strontium on natural mordenite. Radiochim. Acta 61(2), 105–108 (1993).
CAS Article Google Scholar
Kadhum, S. T., Alkindi, G. Y. & Albayati, T. M. Remediation of phenolic wastewater implementing nano zerovalent iron as a granular third electrode in an electrochemical reactor. Int. J. Environ. Sci. Technol. 19(3), 1383–1392. https://doi.org/10.1007/s13762-021-03205-5 (2022).
CAS Article Google Scholar
Kim, C. K., Kong, J. Y., Chun, B. S. & Park, J.-W. Radioactive removal by adsorption on Yesan clay and zeolite. Environ. Earth Sci. 68(8), 2393–2398 (2013).
CAS Article Google Scholar
Savage, D., Lind, A., Arthur, R. C. Review of the Properties and Uses of Bentonite as a Buffer and Backfill Material. (SKI Report 9) (1999).
Becerro, A. I., Mantovani, M. & Escudero, A. Mineralogical stability of phyllosilicates in hyperalkaline fluids: Influence of layer nature, octahedral occupation and presence of tetrahedral Al. Am. Mineral. 94, 1187–1197. https://doi.org/10.2138/am.2009 (2009).
CAS Article ADS Google Scholar
Brigatti, M. F., Galan, E., Theng, B. K. G. Structure and mineralogy of clay minerals. In Developments in Clay Science, Vol. 5, pp. 21–68 (2013).
Sun, D., Cui, H. & Sun, W. Swelling of compacted sand Bentonite mixtures. Appl. Clay Sci. 43(3–4), 485–492 (2009).
CAS Article Google Scholar
Mollins, L. H., Stewart, D. I. & Cousens, T. W. Predicting the properties of Bentonite-sand mixtures. Clay Miner. 31(2), 43–252 (1996).
Article Google Scholar
Sawhney, B. L. Kinetics of cesium sorption by clay minerals. Soil Sci. Soc. Ameh. Peoc. 30, 565–569 (1966).
CAS Article ADS Google Scholar
Ohnuki, T. & Kozai, N. Adsorption behavior of radioactive cesium by nonmica minerals. J. Nuclear Sci. Technol. 50(4), 369–375 (2013).
CAS Article Google Scholar
Durrant, C. B., Begg, J. D., Kersting, A. B. & Zavarin, M. Cesium sorption reversibility and kinetics on illite, montmorillonite, kaolinite. Sci. Total Environ. 610–611, 511–520 (2018).
Article ADS Google Scholar
Mockovciakova, A. & Orolinova, Z. Adsorption properties of modified Bentonite clay. Chem. Technol. 1, 47–50 (2009).
Google Scholar
Al-Nasri, S. & Holmes, S. Effect of different conditions on the sorption behavior of Co2+ using celatom-zeolite Y Composite’, World Academy of Science, Engineering and Technology, Open Science Index 81. Int. J. Mater. Metall. Eng. 7(9), 652–658 (2013).
Google Scholar
Alamudy, H. A. & Cho, K. Selective adsorption of cesium from an aqueous solution by a montmorillonite-prussian blue hybrid. Chem. Eng. J. 349(2018), 595–602 (2018).
CAS Article Google Scholar
Yusof, M. Y. M., Idris, M. I., Mohamed, F., & Nor, M. M. Adsorption of radioactive element by clay: A review. In IOP Conference Series: Materials Science and Engineering 785 (2020). https://doi.org/10.1088/1757-899X/785/1/012020.
Ibrahim, Z. H., Mkhaiber, A. F. & Al-Nasri, S. K. Estimation of concentration of radioactive elements for the liquid waste pool in radiochemistry laboratories in AlTuwaitha Site Baghdad-Iraq. J. Eng. Appl. Sci. 13(10), 3386–3391 (2018).
Google Scholar
Saffa, F.A. Fouad, Tectonic Map of Iraq, Scale 1:1000000, 3rd Edition, 2012., Iraqi Bulletin of Geology and Mining., Vol. 11, No. 1, 2015, p 1−7, Papers of the Scientific Geological Conference Part 2.
Knoll, G. F. Radiation Detection and Measurement 4th edn. (Wiley, New York, 2010) (ISBN-13:978-0470131480).
Google Scholar
Khadim, A. T., Albayati, T. M. & Cata Saady, N. M. Desulfurization of actual diesel fuel onto modified mesoporous material Co/MCM-41. Environ. Nanotechnol. Monit. Manag. 17, 100635. https://doi.org/10.1016/j.enmm.2021.100635 (2022).
Article Google Scholar
Khader, E. H., Mohammed, T. J. & Albayati, T. M. Comparative performance between rice husk and granular activated carbon for the removal of azo tartrazine dye from aqueous solution. Desalin. Water Treat. 229, 372–383. https://doi.org/10.5004/dwt.2021.27374 (2021).
CAS Article Google Scholar
Al-Jaaf, H. J., Ali, N. S., Alardhi, S. M. & Albayati, T. M. Implementing eggplant peels as an efficient bio-adsorbent for treatment of oily domestic wastewater. Desalin. Water Treat. 245, 226–237. https://doi.org/10.5004/dwt.2022.27986 (2022).
CAS Article Google Scholar
Kadhum, S. T., Alkindi, G. Y. & Albayati, T. M. Determination of chemical oxygen demand for phenolic compounds from oil refinery wastewater implementing different methods. Desalin. Water Treat. 231, 44–53. https://doi.org/10.5004/dwt.2021.27443 (2021).
CAS Article Google Scholar
Wu, J. et al. Behavior and analysis of Cesium adsorption on montmorillonite mineral. J. Environ. Radioact. 100(10), 914–920. https://doi.org/10.1016/j.jenvrad.2009.06.02 (2009).
CAS Article PubMed Google Scholar
Galamboš, M. et al. Cesium sorption on Bentonites and montmorillonite K10 M. J. Radioanal. Nucl. Chem. 284, 55–64. https://doi.org/10.1007/s10967-010-0480-1 (2010).
CAS Article Google Scholar
Khan, S. A., Rehman, R. U. & Khan, M. A. Sorption of cesium on Bentonite. Waste Manag. 14, 629–642 (1994).
CAS Article Google Scholar
Missana, T., Garcıa-Gutiérrez, M. & Alonso, Ú. Kinetics and irreversibility of cesium and uranium sorption onto Bentonite colloids in a deep granitic environment. Appl. Clay Sci. 26(1–4), 137–150 (2004).
CAS Article Google Scholar
Miura, T., Takizawa, N., Togashi, K., Sasaki, A. & Endo, M. Adsorption/desorption characteristics of cesium ions on natural and synthetic minerals. J. Ion Exchange 29(1), 9–15 (2018).
Article Google Scholar
Tuaimah, S. K., Al-Nasri, S. K., Al-Rahmani, A. A. & Abbas, T. K. Using dates leaves midribs to prepare hierarchical structures incorporating porous carbon and zeolite a composites for cesium137Cs ion exchange. Baghdad Sci. J. 17(3), 0818 (2020).
Article Google Scholar
Ijagbemi, C. O., Baek, M.-H. & Kim, D.-S. Montmorillonite surface properties and sorption characteristics for heavy metal removal from aqueous solutions. J. Hazard. Mater. 166(1), 538–546 (2009).
CAS Article Google Scholar
Dumat, C., Cheshire, M. V., Fraser, A. R., Shand, C. A. & Staunton, S. The effect of removal of soil organic matter and iron on the adsorption of radiocaesium. Eur. J. Soil Sci. 48(4), 675–683 (1997).
CAS Article Google Scholar
Khalili, F. I., Salameh, N. H. & Shaybe, M. M. Sorption of uranium (VI) and thorium (IV) by Jordanian Bentonite. J. Chem. 13, 13 (2013).
Google Scholar
Al-Ghouti, M. A. & Da’ana, D. A. Guidelines for the use and interpretation of adsorption isotherm models: A review. J. Hazard. Mater. 393, 122383. https://doi.org/10.1016/j.jhazmat.2020.122383 (2020).
CAS Article PubMed Google Scholar
Kalash, K. R. & Albayati, T. M. Remediation of oil refinery wastewater implementing functionalized mesoporous materials MCM-41 in batch and continuous adsorption process. Desalin. Water Treat. 220, 130–141. https://doi.org/10.5004/dwt.2021.27004 (2021).
CAS Article Google Scholar
Balouch, A., Kolachi, M., Talpur, F. N., Khan, H. & Bhanger, M. I. Sorption Kinetics, Isotherm and Thermodynamic Modeling of Defluoridation of GroundWater Using Natural Adsorbents. Am. J. Anal. Chem. 4, 221–228 (2013).
Article Google Scholar
Saha, P., & Chowdhury, S. Insight into Adsorption Thermodynamics, edited by M. Tadashi (InTech, 2011). Chap. 16, pp. 349. https://doi.org/10.5772/13474.
Attallah, M. F., Rizk, S. E. & Afifi, E. M. E. Efficient removal of iodine and chromium as anionic species from radioactive liquid waste using prepared iron oxide nanofibers. J. Radioanal. Nucl. Chem 317, 933. https://doi.org/10.1007/s10967-018-5938-6 (2018).
CAS Article Google Scholar
Vijayakumar, G., Tamilarasan, R. & Dharmendirakumar, M. Adsorption, Kinetic, Equilibrium and Thermodynamic studies on the removal of basic dye Rhodamine-B from aqueous solution by the use of natural adsorbent perlite. J. Mater. Environ. Sci. 3(1), 157–170 (2012).
CAS Google Scholar
Dubey, S. S., Rao, B. S. & Kiran, B. V. Equilibrium and thermodynamic studies of cesium adsorption on bentonite clay. Int. J. Pharm. Technol. 5(1), 5204 (2013).
CAS Google Scholar
Kajjumba, G. W., Emik, S., Öngen, A., Özcan, H. K., & Aydın, S. Modelling of adsorption kinetic processes—errors, theory and application. In Advanced Sorption Process Applications. (IntechOpen, 2019). https://doi.org/10.5772/intechopen.80495.
Lian, L., Guo, L. & Guo, C. Adsorption of Congo red from aqueous solutions onto Ca-Bentonite. J. Hazard. Mater. 161(1), 126–131. https://doi.org/10.1016/j.jhazmat.2008.03.063 (2009).
MathSciNet CAS Article PubMed Google Scholar
De Tello, C. C. O., dos Santos, D. M. M. & Teixeira, T. B. Study of the sorption and modelling of cesium by a Brazilian Bentonite using PHREEQC. MRS Adv. 5, 245–252. https://doi.org/10.1557/adv.2020.57 (2020).
CAS Article Google Scholar
Download references
We gratefully acknowledge the scientific support of the Radiation and Nuclear Safety Directorate Al-Tuwaitha Nuclear Site/Atomic Energy Authority, Baghdad-Iraq, Department of Chemical Engineering, University of Technology-Iraq; and to the Iraqi Geological Survey/Ministry of Industry and Minerals.
Iraqi Geological Survey/Ministry of Industry and Minerals, Baghdad, Iraq
Wasan A. Muslim
Department of Chemical Engineering, University of Technology-Iraq, 52 Alsinaa St., PO Box 35010, Baghdad, Iraq
Talib M. Albayati
Radiation and Nuclear Safety Directorate Al-Tuwaitha Nuclear Site/Atomic Energy Authority, Baghdad, Iraq
Salam K. Al-Nasri
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
W.A. and T.M. wrote the main manuscript text and S.K. prepared Figs. 1, 2 and 3. All authors reviewed the manuscript.
Correspondence to Talib M. Albayati.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Muslim, W.A., Albayati, T.M. & Al-Nasri, S.K. Decontamination of actual radioactive wastewater containing 137Cs using bentonite as a natural adsorbent: equilibrium, kinetics, and thermodynamic studies. Sci Rep 12, 13837 (2022). https://doi.org/10.1038/s41598-022-18202-y
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-18202-y
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Advanced search
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.
Pittsburgh Steelers Sign Former Ohio State Running Back Master Teague III | Eleven Warriors – Eleven Warriors
Master Teague III is getting another shot to make an NFL roster.
The Pittsburgh Steelers signed the former Ohio State running back on Wednesday, adding him to their roster after placing another running back they recently signed, Jeremy McNichols, on injured reserve with a shoulder injury.
Teague will now get his second shot at making an NFL roster after going undrafted earlier this year. Teague initially signed with the Chicago Bears following the draft, but was waived by the Bears following their rookie minicamp.
He’ll likely face an uphill battle to make the Steelers’ 53-man roster. Najee Harris returns for his second year as the Steelers’ starting running back while Anthony McFarland and Benny Snell are expected to be his top backups. But Teague will now have the opportunity to show what he can do in training camp and in the Steelers’ three preseason games with hopes of showing enough value as a running back and on special teams to earn a spot on the roster or practice squad.
He becomes the second former Ohio State player on the Steelers’ roster, joining Cameron Heyward.
Scroll To Top
Fresh cotton and other wares at Eleven Warriors Dry Goods.
Eleven Warriors is where Ohio State fans gather. As an independent site, we’re committed to delivering Buckeye fans the news and analysis they deserve, all while remaining free.
If supporting an indie site is your thing, please consider becoming a 12th Warrior, buying our merch, or contributing in other ways.
Forged in Columbus, OH–IO.
All systems operational.
4 Side Gigs for Recent College Graduates – GOBankingRates
Many of the offers appearing on this site are from advertisers from which this website receives compensation for being listed here. This compensation may impact how and where products appear on this site (including, for example, the order in which they appear). These offers do not represent all available deposit, investment, loan or credit products.
Congratulations to the class of 2022! Students who recently graduated with college degrees may be currently on job hunts for their first full-time positions. As post grads prepare to start their careers, it may be beneficial to work an additional side hustle.
Here It Is: Our 2022 Small Business Spotlight
Read More: 22 Side Gigs That Can Make You Richer Than a Full-Time Job
While side gigs aren’t exactly new advice, new grads do benefit from working relevant jobs in their fields instead of resorting to more laundry list options such as delivering food or driving rideshares.
Bonus Offer: Open a new Citi Priority Account by 1/9/23 and earn up to a $2,000 cash bonus after completing required activities.
No matter what you majored in, there’s a way to focus on activities that highlight your skills and can help boost your resume and land you a great job. Here are a few side gigs recent graduates may consider exploring.
Recent graduates with majors in marketing or communications have several side hustle opportunities available to them.
Scott Gibney — education and career consultant at Gibney Solutions LLC — said marketing majors may provide social media solutions to local businesses. Similarly, communications majors can recommend and develop public relations strategies to small businesses. Those who majored in journalism can start their careers as freelance writers by pitching magazines, media outlets and local newspapers with relevant story ideas.
A writing side hustle offers a recent college graduate the opportunity to start building up experience and a portfolio of clips. The sooner a college graduate can establish a portfolio, the more their chances improve for getting noticed in their desired field.
“Many students wait until their junior year to look for jobs or internships to get experiential training which can be included on their resume,” Gibney said. “But, in this competitive age, the time to start planning this search should now begin in the freshman year.”
Bonus Offer: Find a Checking Account that Fits Your Lifestyle. $100 Bonus Offer for New Checking Account Customers.
Take Our Poll: Do You Tip For Service?
If you majored in computer science, consider working in a role where you help with coding for a local merchant’s website or support other technology. This is a side hustle you can work from the comfort of home that offers value to both introverts and extroverts.
One question Gibney is often asked is which side gigs are best for art, music and theater majors. How can creatives get started in their respective fields?
Look for opportunities all around you. If you graduated with a major in art, you may consider providing support to a local gallery with exhibits or tours. Illustrators may consider a side hustle where they can focus on graphic design and work with a few clients on new logos or refreshing older designs.
“Theater degree candidates can introduce themselves to production staff at the local playhouse, offering to help with the business aspects of a production or to introduce acts,” Gibney suggested.
Bonus Offer: Bank of America $100 Bonus Offer for new Online Checking Accounts. See page for details.
All of these roles give recent graduates the hands-on experience they need and allow them to maximize their side hustles. Gibney said students will be able to develop problem-solving skills, enhance their professional network and build their resumes with experiential training and skills that companies are seeking.
Don’t see a side gig in this list that fits your skill set? Consider creating your own side hustle. This gives students opportunities to help local companies and merchants while showing future employers their innovative sides.
Gibney uses the example of a student who graduates with a fashion degree. The side gig might be offering to create and host a fashion show at a local dress shop.
When considering the best side hustle options, Gibney said college students should first take into consideration how this activity can play a positive role in getting a job. To do this, students should focus on their major and career goals. Successful side gigs — such as those in relevant fields like writing, coding, design or a side hustle built from scratch — allow students to show potential employers how they take academic theory learned in school and successfully apply it to real-life activities.
More From GOBankingRates
Share This Article:
Heather Taylor is a senior finance writer for GOBankingRates. She is also the head writer and brand mascot enthusiast for PopIcon, Advertising Week’s blog dedicated to brand mascots. She has been published on HelloGiggles, Business Insider, The Story Exchange, Brit + Co, Thrive Global, and more media outlets.
Every day, get fresh ideas on how to save and make money and achieve your financial goals.
Sponsored Links by Zergnet 
Advertiser Disclosure: Many of the offers appearing on this site are from advertisers from which this website receives compensation for being listed here. This compensation may impact how and where products appear on this site (including, for example, the order in which they appear). These offers do not represent all available deposit, investment, loan or credit products.
SAVE NOW!
Sign up for our daily newsletter for the latest financial news and trending topics.
For our full Privacy Policy, click here.
ROOTSandBLUES: Artist captivates with musical retelling of Robert W. Service poem – Penticton Western News
Cellist, composer and performing artist Christine Hanson will be playing the ROOTSandBLUES Main Stage at 7 p.m. on Sunday, Aug. 21, and will take part in a “Pushing The Boundaries” workshop at 3:15 p.m. Saturday at the Barn Stage. (Contributed)
Award winning cellist and composer Christine Hanson to play Main Stage on Sunday
By James Murray
Contributor
Against a backdrop of Ted Harrison’s timeless artwork depicting the Yukon and Canadian Arctic, and the words of Robert W. Service’s memorable poem The Cremation of Sam McGee, cellist, composer and performing artist Christine Hanson’s music rises, tumbles and turns and dances across the stage – not at all unlike the aurora borealis.
Hanson will bring her work to the Main Stage at the 30th Annual Salmon Arm ROOTSandBLUES Festival and in an afternoon workshop.
The multi award-winning, Edmonton-based cellist and composer, Hanson has studied, performed and recorded music for some 30 years. In addition to her classical training on cello, she has studied contemporary musical theory, composition, music technology and jazz at Grant MacEwan University in Edmonton, as well as electronic music production at the SAE Institute in Glasgow, Scotland.
“The Sam McGee piece was originally commissioned in 2007 by the Celtic Connections Music Festival in Glasgow, where I was living at the time. I knew I wanted it to be a multi-media piece. I stewed over it for a whole year. In the end – well, I think it says who I am, where I come from and where I’ve landed as an artist. I’m excited about presenting it to the audience at ROOTSandBLUES.”
Hanson will be accompanied on stage by Billi Zizi on electric guitar and vocals, Eric Doucette, keyboard, Nick La Riviere, trombone, Ivonne Hernandez, violin, Jamie Philp, acoustic and electric guitars, Mario Allende, drums, Clinton Carew, narrator and local musician Jake McIntyre-Paul on bass.
Read more: ‘Celebrate compassion’: New York’s Willie Nile to rock Salmon Arm’s Song Sparrow Hall
Read more: Summerland connection to Sam McGee recognized
“The art work, the poem and the music work on so many levels. On one level it is about friendship and promises made, on another level it is about the human condition, life’s struggles, rebirth and death,” said Hanson. “It is about life during simpler times and about time shrouded in a misty past. It is also about simple joys and feeling good … for me, I guess, it’s mostly about connecting to the audience.”
In 2006, Hanson won CBC’s Galaxie Award for Best New Artist at Junofest. She has also toured with the Amati Tango Trio in the Arctic, performed Hadestown with playwright/composer Anais Mitchell and folk artist Ani DiFranco, as well as accompanied Jann Arden at Edmonton’s Winspear Centre. Hanson also performed on Scottish singer-songwriter Rab Noakes’ 2018 album, Welcome to Anniversaryville, produced by the BBC’s John Cavanagh. In 2020, Hanson was nominated for a Western Canadian Music Award in the Instrumental Artist of the Year category.
Music captured Hanson’s heart, mind and imagination at an early age. She began playing cello at age four.
Let her capture your heart, mind and imagination at 7 p.m. Sunday, Aug. 21 at the Main Stage. Hanson will also take part in a “Pushing The Boundaries” workshop at 3:15 p.m. Saturday at the Barn Stage.
[email protected]
Like us on Facebook and follow us on Twitter
Roots and Blues FestivalSalmon Arm
Be Among The First To Know
Sign up for a free account today, and receive top headlines in your inbox Monday to Saturday.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
A link has been emailed to you – check your inbox.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
A link has been emailed to you – check your inbox.
Master Piece lives up to his name at Del Mar – The San Diego Union-Tribune
First of all, Master Piece wouldn’t have been running in Sunday’s Grade II Eddie Read Stakes at Del Mar had the original field gone off as entered.
Then there was the incident coming out of the gate and an inquiry to survive.
But after a rather long review of the start, Master Piece was officially declared the 16-1, long-shot winner of the 11/8-mile, $250,000 turf test for older horses.
Clearly, Master Piece, with Abel Cedillo aboard, veered left leaving the starting gate, making contact with Cathkin Peak, one of four Phil D’Amato-trained entries in the 10-horse field. Then, Master Piece veered a second time while still in the short chute, but this time made no contact.
The stewards ruled there wasn’t enough to warrant a disqualification.
“I was a little nervous,” admitted Michael McCarthy, the trainer of Master Piece, after the race. “But it was one horse. It’s not like it was the entire field.”
“I didn’t think a whole lot happened at the start,” said Cedillo. “I just brushed the horse alongside me (Cathkin Peak). My trip was really good. He was running all the way.”
Master Piece was next-to-last after a half mile and still seventh at with a quarter-mile to go and fourth at the top of the stretch.
“I got lucky at the three-eighths pole,” said Cedillo. “I had to go between two horses and the opening was there for me. Then he was really running late. Big race, good race for him.”
“I knew he would run well,” said McCarthy of Master Piece. “But I was surprised at the move he put in. That was pretty impressive.”
Then came the wait as the start was replayed and replayed on the video board.
Meanwhile, D’Amato’s entries ran second (Hong Kong Harry), third (Cathkin Peak), fifth (Masteroffoxhounds) and eighth (Cash Equity).
Master Piece finished 3¼ lengths ahead of Hong Kong Harry with Ramon Vazquez aboard.
It was another half length back to Cathkin Peak and Umberto Rispoli. Going into the Eddie Read Stakes, Rispoli and D’Amato had already combined to win six turf races in the first six days of the summer meeting, including two stakes races.
Master Piece, whose best finish in a stakes race since being imported from South America was a second in the 2021 Grade II Del Mar Handicap, paid $34.20 to win.
Master Piece was the longest shot in a series of wins by outsiders to cap Sunday’s program. In order, Heathers Grey (10-1) won the seventh, Justique (9-1) won the eighth, Master Piece took the ninth, I’m Corfu (14-1) won the 10th and Claddagh Cure (10-1) took the finale.
Juan Hernandez won the first three races Sunday to give him 13 wins and a four-win lead over Rispoli over the meeting’s first two weekends.
Earlier, Hernandez’s agent, Craig O’Bryan discussed how the relocation of five-time Del Mar riding champion Flavien Prat to the East Coast has affected the availability of good mounts for Hernandez and other jockeys.
“Everyone else moves up one,” said O’Bryan. “But everyone already knew Juan is very good. He won 12 of the last 23 stakes before Del Mar already has three here. It’s definitely helped with Prat moving on. Some very good horses that he rode here, now need riders … horses from trainers like (Bob) Baffert and (John) Sadler …
“But there are loyalty issues, too. If Juan has consistently been on a horse for a trainer in top races, we’re not going to jump to another horse just because he’s become available because Prat has departed. It’s a two-way street.”
Hernandez’s first two wins Sunday were for Baffert. His third win was for Peter Miller, who then doubled in the fourth.
Center is a freelance writer.
Sign up for U-T Sports daily newsletter
The latest Padres, Chargers and Aztecs headlines along with the other top San Diego sports stories every morning.
You may occasionally receive promotional content from the San Diego Union-Tribune.
Horse Racing
Havnameltdown wins Sunday’s Best Pal pulling away
Horse Racing
Day 15 of a 31-day meet
Horse Racing
Filly makes race look like a paid workout
Horse Racing
Day 14 of the 31-day meet
Horse Racing
Heads field in Saturday’s Grade II Yellow Ribbon
Horse Racing
Day 13 of the 31-day meet
Privacy Policy
Terms of Service
Sign Up For Our Newsletters
Follow Us
Vandoorne and Mercedes-EQ seal World Championship titles as Mortara wins in Seoul – Formula E
Immerse yourself in Formula E’s dedicated fan festival – Enter the Driver Q&A, get virtual autographs and join in on the fan wall.
Master the unpredictable. Play Formula E Predictor
Change the race. Boost your favourite driver
DHL + Formula E Together Green Award. Celebrating sustainability heroes
Immerse yourself in Formula E’s dedicated fan festival – Enter the Driver Q&A, get virtual autographs and join in on the fan wall.
Master the unpredictable. Play Formula E Predictor
Change the race. Boost your favourite driver
DHL + Formula E Together Green Award. Celebrating sustainability heroes
Stoffel Vandoorne steered to silverware with a second-placed finish in the Hana Bank Seoul E-Prix Round 16 to make more than sure of sealing the 2021/22 ABB FIA Formula E Drivers’ World Championship and the Teams’ World Championship for Mercedes-EQ – a double-double – as Edoardo Mortara (ROKiT Venturi Racing) steered to a consummate centenary race win.
Vandoorne navigated the Lap 1 melee and kept it clean throughout the rest of the race to bring the Silver Arrow 02 home second – plenty enough to see him take a maiden Drivers’ crown and hand Mercedes-EQ back-to-back Drivers’ and Teams’ titles on the German marque’s Formula E swansong.
Mortara checked out once he hit the front via a stunning dummy saw him complete a successful switchback on Julius Baer Polesitter Antonio Felix da Costa (DS TECHEETAH) on Lap 3. From there, he managed the gap and his usable energy perfectly to sign off his and Venturi’s campaign in style – the Monegasque outfit taking second in the Teams’ running ahead of DS TECHEETAH, and Mortara third in the Drivers’.
RESULTS: The Hana Bank Seoul E-Prix Round 16
Jake Dennis (Avalanche Andretti) drove to a strong third position, despite a tough-to-take five second penalty following a coming-together with da Costa.
Robin Frijns (Envision Racing), Oliver Askew (Avalanche Andretti), and Jean-Eric Vergne (DS TECHEETAH) rounded out the top six, with Evans coming home an eventual seventh – a strong drive with little else he could have done. Nobody won more than Evans’ four races this season, but it was Vandoorne’s consistency – just one non-score and a record eight podiums – that sealed the deal.
"World Champions; wow," said Vandoorne. "It’s just the best feeling ever. Just look at the season we’ve had – the consistency and the car has been amazing and the team has done an incredible job – I think every single one of us deserves it. What we’ve accomplished is something special."
.@svandoorne is the 2021/22 ABB FIA Formula E World Champion! 👏🏆 pic.twitter.com/8JholUiHh2
As it happened…
A dry track greeted the grid on Sunday in Seoul after Saturday’s downpours, everybody filtered through with the leaders as you were with Dan Ticktum (NIO 333) profiting to go sixth amid the melee through Turn 2. Vandoorne picked his way through to hold that fourth spot, with Evans gaining a place to go 12th with an important move on Nyck de Vries (Mercedes-EQ).
On Lap 3, Mortara spied his chance to jump da Costa for the lead with a switchback at Turn 22. The dummy was bought by the Portuguese and the Venturi driver took the lead, with Dennis following in second spot.
Ticktum had run with the lead six through the opening laps but was forced to pit with a technical problem at the end of Lap 3. A real shame for the Brit who looked to be in with a chance of sealing NIO 333’s first points since Rome.
The first round of ATTACK MODE activations was kicked off by Pascal Wehrlein (Porsche), who’d worked his way up five positions to 10th, before retiring the Porsche at Turn 4. De Vries was in strife on Lap 7, too, with the Mercedes-EQ driver getting into Wehrlein – causing both race-ending damage; Venturi’s chances of overthrowing the German giants saw a significant boost.
With a third of the race gone and one of two mandatory 30kW ATTACK MODE boosts down, Mortara headed Dennis and looked to be managing a cushion of just over a second. Both were three seconds up the road of Da Costa, Vandoorne, Frijns, di Grassi, Askew, Vergne, Evans and Cassidy rounded out the top 10. As it stood, Vandoorne had more than a hand on the Drivers’ World Championship trophy, with Evans needing to win. The Jaguar driver, meanwhile, was losing ground to the leader – some 10 seconds back.
There was big Teams’ World Championship drama on Lap 13 as di Grassi was forced into pitting to sort a front-right puncture. That gave Mercedes-EQ a 16-point advantage – impossible to close without the Brazilian’s presence in the points.
With 22 minutes plus one lap to go, the Safety Car was deployed to recover Maximilian Guenther’s stricken Nissan e.dams which looked to have something terminally broken on the front left corner. A lifeline for Evans? The pack would be squeezed back up but Vandoorne, still fourth, held all the cards.
On the restart, leader Mortara and da Costa jumped for their second ATTACK MODE boost. At Turn 22, Dennis was on the defensive with da Costa hunting second with that extra 30kW of power in-hand. The Portuguese’ DS and Dennis’ Andretti came to blows and da Costa ended up nose-first in the wall and shuffled right to the back of the pack.
Into 6m35s plus one lap after TAG Heuer Added Time, and Dennis was penalised to the tune of five seconds added to his race time for that move – leaving him a net third at the final chequered flag of the Gen2 era.
Mortara had plenty in hand to steer to the win by almost four seconds from Vandoorne, with Dennis third, Frijns fourth, Askew fifth and Vergne rounding out the top six. Evans’ seventh was valiant but ultimately not enough.
Back-to-back on Mercedes-EQ swansong
With Mercedes-EQ ending their current spell at the end of the Gen2 era, and McLaren set to enter the next generation and Gen3 in their place, Team Principal Ian James could barely contain his excitement at securing back-to-back Teams’ and Drivers’ titles.
"This is huge," he said. "I’m just about holding it together at the moment. I’m so pleased for Stoffel – there isn’t anybody that deserves it more than him. He has been so consistent this year – everything he’s put into the building and team development – he’s been such an instrumental part of our success and to see him achieve this is a dream come true for him – it’s phenomenal. And then to do it in Mercedes-EQ’s final year as well. This is a very special moment."
WORLD CHAMPION 🏆
🇰🇷 2022 Hana Bank #SeoulEPrix | @svandoorne @MercedesEQFE pic.twitter.com/CAyzVrrajk
Published on 14th August 2022
5 min read
Get yourself up to date with the action and the inside track from the 2022 Hana Bank Seoul E-Prix in the Live Hub
