Blog

A heat-flux upper boundary for modeling temperature of soils under an embankment in permafrost region | Scientific Reports – Nature.com

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 13295 (2022)
86 Accesses
Metrics details
Building roads in permafrost region is challenged because permafrost is sensitive to temperature increase. As an embankment gains/drains heat mostly at the upper surface, accurately modeling the heat transfer in the upper surface is crucial to understand the thermal stability of the road. Popular methods treat the upper boundary as a temperature-controlled model (TCM), where temperature of the upper surface is set as a sinusoidal function. This simple function, however, fails to identify the influences of solar irradiance, heat convection, and thermal irradiance on the heat transfer on the ground surface. Here we introduce a heat-flux model (HFM) to calculate the heat fluxes at the embankment upper surface and at the adjacent ground surface. HFM-predicted temperature under an embankment is compared against the observed temperature to validate the model, and is compared to the TCM-predicted temperature. While TCM-predicted temperatures and HFM-predicted ones are similar in trend and in pattern, the HFM-predicted temperatures are far more coincident with the observed ones. The pros and cons of both HFM and TCM are discussed. Further studies are expected to use HFM to understand the heat flux components such as solar absorption, heat convection, and thermal irradiance on the temperature of permafrost under embankments.
Permafrost regions cover approximately 22.8 million km2 earth surface, of which permafrost in China makes up 1.59 million km21. Roadways across permafrost regions are usually layered upon a built-up embankment to keep the underlying soil intact2. The construction of the embankment varies the permafrost stratum undesirably and causes differential settlement at the ground surface3,4,5,6. Accurately simulating the heat transfer at the ground surface is critical to precisely predict the temperature of the permafrost stratum after the construction of the embankment. When simulating the temperature of soils under a permafrost embankment, popular methods usually treat this boundary as a temperature-control model (TCM)7,8,9, in which the temperature at the ground surface is assumed a sinusoidal wave. This sinusoidal wave is used to bulkily represent the influences of solar radiation, heat convection, thermal irradiance, and evaporation (if any) on the ground surface10. While this model is simple, the parameters of the sinusoidal wave are estimated by rule of thumb, but not by art (Table 3) and is thus hard to be estimated accurately.
If the ground-surface temperature can be guessed reliably, the temperatures of the deeper soil vary less and thus can be estimated with greater confidence. Qin et al. has proposed a heat-flux upper boundary (HFUB) for the natural ground surface to predict the temperature of permafrost stratum10,11. The model is suitable to predict the temperature of permafrost under a flat, open area only. Liu et al. then proposed an earth-atmosphere coupled model to predict the temperature of soil under an embankment12. This model, however, does not consider the variation of daily solar irradiance. Without a HFM for predicting the temperature of the embankment and its underlying soils, it is unscientific to guide the selection of performance grading of asphalt binder for asphalt pavement under the specific climate condition; it is difficult to understand the partition of radiant heat flux at the ground and to find practical solutions that cut the heat gain of the embankment to preserve the underlying permafrost; it is unknown how to eliminate the sunny-shady effect of embankment in permafrost region by equalizing the conductive heat at both embankment side slopes. In addition, as the global warming heats up the underlying permafrost and causes deformation to the embankment, the HFM is indispensable to predict the settlement of the embankment precisely.
Here we propose a comprehensive heat-flux model (HFM) for the heat transfer at the embankment upper surface and at the natural ground adjacent to the embankment. The proposed model considers the heat flux from solar irradiance, heat convection, and thermal irradiance, and counters the shading effect of the embankment on the adjacent ground. Temperatures predicted by the HFM model are compared against the temperature profiles that are observed from a testing section at the Beiluhe Permafrost Station in the Qinghai-Tibet Plateau. The TCM is also used to predict the temperature at the same site to demonstrate the difference between the TCM and the HFM. The pros and cons of both the HFM and the TCM are explained. The application of the HFM is briefly discussed.
The heat transfer in the embankment and in the soils below an embankment is conduction-dominated, which obeys
where ρ (kg/m3) is the density of the soils; T (°C) is the temperature of the soils; ceq (J/(kg K)) is the equilibrium heat capacity of the soils; and λ (W/(m⋅K)) is the heat conductivity of the soil. It is noted that ceq represents the latent heat of the permafrost when the phase change of water in the permafrost occurs. Methods to calculate ceq and λ have been documented well and can be referred in Appendix A of Supplementary Information.
To solve Eq. (1), one must specify a proper boundary condition to the computational domain, which should be sufficiently large so that a further extent of the domain does not influence the temperature simulation of the embankment and of the underlying soils. As an embankment is usually an isosceles trapezoid with the short base at the top, the computational domain is selected as the trapezoid centered over a rectangle envelop that represents the natural ground (Fig. 1). The heat flux from right and left sides of the rectangle envelop is adiabatic, and the heat flux from the bottom of the base is the product of the local geothermal gradient and the heat conductivity of the soil at the base (Fig. 1). Most of heat fluxes that change the temperature of the embankment and of the underlying soils come from the upper boundary, which consist of the embankment upper surface, the side slope surface, and the adjacent natural ground surface (Fig. 1). In published articles10,13, the upper boundary can be treated as either a temperature-controlled boundary (Fig. 1a) or a heat-flux boundary (Fig. 1b).
The computational domain of an embankment underlain by permafrost. (a) temperature-controlled upper boundary, (b) heat-flux upper boundary. Ti (i = 1, 2, …, 5) stands for a specific sinusoidal temperature function.
Popular models to predict the temperature of the permafrost under a roadway embankment prefer using a temperature boundary, which is termed TCM. The TCM specifies to the upper boundary as a sinusoidal temperature function
where Ts (°C) is the ground-surface temperature, T0 (°C) represents the mean annual ground temperature, and A (°C) is the amplitude of the ground-surface temperature, ω (rad/s) represents the angular frequency, ω = 2π/(24 × 3600 × 365); and ϕ stands for the phases (in radians) of annual ground surface temperature.
Equation (2) considers the daily temperature only, although some models occasionally take the daily temperature pattern into account14. As the ground-surface temperature is difficult to be measured directly, T0 and A are coarsely estimated from the annual air temperature (data from the nearly weather station) according to the adhesive layer theory15. Parameters in Eq. (2) bulkily represent the complex heat transfer at the ground surface, without considering the solar irradiance, convection, thermal irradiance, and evaporation.
The HFM focuses on formulating the upper boundary to solve the temperature of soils in the computational domain using Eq. (1). The most variable heat-flux boundaries are the ground surfaces and the embankment’s upper surface. Both surfaces absorb irradiance from the sun and downward thermal irradiances from the outer space Ld (W/m2). Both surfaces release a portion of the absorption as heat convection H (W/m2), upward long-wave radiation to the outer space Lu (W/m2), and evaporation E (W/m2) (if any) simultaneously. The surplus heat flux, G (W/m2), stores at the ground surface to vary the skin temperature and conducts it to the deeper soils. The heat balance of the upper surface exposed to the air obeys,
where I (W/m2) is the incoming solar irradiance to the surface, R (–) is the reflectance (albedo) of the surface.
In Eq. (3), Lu and Ld are proportional to the ground-surface thermal emissivity, ε (–); in practice, it is more convenient to compute the net long-wave radiation, which is
where σ is the Stefan-Boltzmann constant, σ = 5.67 × 10−8 W ·m−2 ·K−4; the subscripts “s” and “y” represent the ground surface and the outer sky, respectively.
In Eq. (4), the ground-surface temperature, Ts, can be calculated from Eq. (1) once the heat flux is specified to the boundary of the computational domain. The sky temperature, Ty (°C), can be estimated:
where Ta (°C) is the air temperature; εy (–) is the sky emissivity, which is
where Td (°C) is dew point:
where a0 = 17.3, b0 = 237.7, and r0 = a0Ta/(b0 + Ta) + ln(χ/100)12, with χ is the relative humidity of the surrounding air.
The heat convection, H, can be calculated by
where hc (W/(m2·°C)) is the heat convection coefficient. The computation of hc has been well documented in many models, among which the following simple one can provide reliable accuracy16
where v (m/s) is the wind speed recorded at a height of 9.0 m. For a wind recorded from a weather station that is not set at 9.0 m height, the wind speed must be converted according to
In Eq. (3), the evaporation E is difficult to calculate because it is hard to know both the water availability at the ground surface and the evaporation resistance of the ground surface. When water is available at the ground surface, the evaporation is proportional to the incoming solar radiation, with the peak evaporation occuring around solar noon and with a negligible evaporation at nighttime. According to Qin et al.10, the evaporation term can be reasonably neglected by calibrating the solar reflectance at the ground surface. In this model, the evaporation is neglected, and the ground-surface reflectance is adjusted unless the observed ground temperature is coincident with the predicted one. As a result, the heat flux to the upper boundary of the computational domain is
In Eq. (11), formulas to calculate the components H and L have been shown. The most complex component in Eq. (11) is the solar irradiance, I, on the embankment surface and on the ground surface adjacent to the embankment.
Solar irradiance on a global horizontal surface is the global horizontal solar irradiance logged from the local weather station. Solar irradiance is partitioned to beam radiation and diffuse radiation. The side slope of an embankment can be either shaded or sunlit, depending on the time of the day, on the day number of the year, on the orientation of the embankment, and on the angle of the side slope. The solar irradiance on the side slope is thus more complicate. To find the solar irradiance on a tilt surface, one must find the solar azimuth angle, which varies with day and time. On a specific day, the solar declination angle, δ (rad), can be estimated from
where N is the day number of the year, with N = 1 on January 1.
On a specific time of the day, the solar zenith angle can be estimated from
where β (rad) is the latitude of the observer; α (rad) is the solar hour angle, which is 0 at solar noon. The time span from sunrise to sunset can be derived from:
where α at the sunset time is positive, and at the sunrise time is negative.
With the solar declination angle, the solar zenith angle and the solar hour angle, one can find the solar azimuth angle, (gamma) (rad), is given by
If (left|mathrm{sin }gamma right|>1) or if (left|mathrm{sin}theta right|) in Eq. (15) is infinitesimal, the solar azimuth angle has to be estimated by:
It is noted that at noon θ = 0, the denominator in Eqs. (15) and (16) is equal to zero. To circumvent this problem, one can discrete the time sequence between sunrise to sunset in an even number so that the sequence does not have θ = 0.
With the solar azimuth angle, one can determine if a side slope of an embankment is sunlit or shaded. At low-sun case, beam radiation hits one side slope only, while the other is shaded. Assuming the height of the embankment is h (m), beam radiation creates a shaded belt parallel with the embankment orientation. The width of the belt is
where γe (rad) is the orientation of the embankment.
Whether a side slope of an embankment is sunlit or shaded can be estimated by
where η (rad) is the angle of the side slope of the embankment.
Global solar horizontal solar irradiance, I (W/m2), is divided into beam irradiance Ib (W/m2) and diffuse irradiance Id (W/m2), that is
The division has been documented in many models, in which one simple, well-cited model can provide reasonable accuracy17:
where ky is the sky cleanness factor with 0 representing a fully cloudy day and 1.0, a fully sunny day.
The global horizontal solar irradiance, I, can be directly specified to the upper surface of the embankment. However, the solar irradiance on the side slope and on the natural ground surface adjacent to the embankment is more complicate. According to Eq. (18), if a surface is sunlit, the solar irradiance is Id + Ib falling on that surface; otherwise, is the Id only. Diffuse irradiance on the side slope is
The beam radiation on the side slope is the dot product of the beam irradiance Ib and the normal of the side slope.
where the azimuth of the side slope, ψ (rad), can be estimated by
In Eq. (22), if Ibs < 0, which means the slope is shaded, then Ibs = 0. The solar irradiance on the side slope is
The solar irradiance on the natural ground surface, Ig, is also the addition of diffuse irradiance Idg and beam irradiance Ibg. The construction of the embankment blocks the sky view of the natural ground surface, especially the surface that is close to the side slope toe of the embankment. Setting the side slope toe is the origin, the x axis perpendicular to the embankment orientation, and the y axis normal to the ground surface, one gets the sky view factor of any point (x,0) at the natural ground surface as
The diffuse radiation on the natural ground surface adjacent to the side slope is
The beam radiation on the natural ground surface is
The solar irradiance on the natural ground surface adjacent to the side slope is
It is noted that a factor of sunlight reflecting from the side slope can be captured by the adjacent natural ground surface, and vice versa. This solar trapping effect increases the solar absorption of the side slope and of the adjacent ground, especially for the surface near the side slope toe. This topic has been documented and it is found the additional solar absorption caused by the solar trapping effect is negligibly small compared to the solar absorption18.
This study uses both the TCM and HFM to simulate the temperature of underlying permafrost under an embankment in the Beiluhe Permafrost Station (34.8° N, 92.9° E). The simulated results are compared against the logged temperature. The embankment is isosceles with a height of 3 m, a top (short) base of 8.0 m, and a lower (long) base of 17 m. The computational domain is extended horizontally 20 m from the side-slope toe of the embankment, and vertically 22 m from the natural ground surface. The orientation of the embankment is set as east–west orientation, because the thermal asymmetry of this embankment is the most-deleterious case. The embankment filler consists of coarse grained soil. The computational domain in the natural ground, from top to down, consists of a 2 m-thick loose silty clay, a 2 m-thick silty clay, a 6 m-thick layer with ground ice and clay, and finally a 12 m-thick mudstone silty clay (Fig. 1). Soils’ thermal parameters used for the simulation are listed in Table 1. Both left and right sides of the computational domain are set as adiabatic, and the thermal gradient at the bottom of the domain is 0.03 °C/m.
Firstly, the heat-flux boundary is specified to the upper surface of the computational domain. The air temperature Ta, the global horizontal solar radiation I, and the wind speed v, the relative humidity χ, and the sky cleanness factor ky at the embankment site are logged from typical annual weather data. The solar irradiance on the top of the embankment is Eq. (19); that on the side slope, Eq. (24); and that on the adjacent ground surface, Eq. (28). The solar reflectance of the embankment top, side slope, and adjacent ground is set as 0.22 according to Qin et al.19. Considering that water evaporates when it is available at the topsoil and that the evaporation pattern is coincident with solar radiation pattern, the simulation adjusts the reflectance some degree unless the predicted temperatures are best matched with the observed ones.
Then, the TCM is used to simulate the permafrost temperature at the same site. As a guess of the parameters (T0, A, and ϕ) in Eq. (2) could cause substantial errors, this study does not use the adhesive layer theory to parameterize the average, amplitude, and phase of annual ground-surface temperature. Instead, this study uses the least square fitting method to fit the ground-surface temperatures that are predicted via the HFM. The fitting T0, A, and ϕ in Eq. (2) are used as the parameters for the TCM to simulate the soil temperature under the embankment, while the soils’ thermal properties are kept unchanged.
In numerical simulation, either the HFM or the TCM needs specifying an initial temperature to the embankment and to the soil under the embankment. Initial temperatures of the natural ground soils are obtained by repeatedly using the heat-flux boundary to simulate the ground temperature (without embankment) until the differences of the temperature profile at a specific time of two sequential years are less year 0.01 °C. The temperature profile at 00:00 (hh:mm) on September 30 is treated as the initial temperature because the construction of the embankment is completed around this date usually. The initial temperature of the embankment is set as 2 °C uniformly, as usually used in published articles on this topic. This initial temperature (for the soil and the embankment) is used to simulate the temperature of the soils for 50 years after the construction of the embankment.
The soil temperature predicted by the HFM is compared against the temperature logged an earthen embankment in the Beiluhe Permafrost Station from September 2001 to October 2006. The embankment, DK1136 + 400, is an earthen roadbed of the Qinghai-Tibet Railway. Thermistors were buried inside the embankment central borehole and inside the boreholes rightly below the side slope toes to log the soil temperature. In addition, at the natural ground that was 20 m away from the embankment side slope toe, a borehole was also drilled to log temperature at the natural ground. For convenience, the temperature reported in the following section are the daily mean temperature, unless otherwise noted.
Since it was assumed that the ground thermal regime has reached an equilibrium state before the construction of the roadbed. Therefore, to ascertain the ground temperature error caused by the iteration, field-observed temperature from September 7, 2001 to September 7, 2006 was compared with that of simulation. In addition, we adopted the coefficient of determination (R2), mean value (Mean), and standard deviation (Std) to examine the accuracy of the simulation results, where all three indicators were calculated using MATLAB software. The specific calculation methods are as follows:
where To, Ts, (overline{{T }_{o}}) are the observed temperature, the simulated temperature and the average value of the observed temperature, respectively; n represents the total number of values (n = 1, 2, 3, …), and the subscript i stands for the serial number of the values.
Figure 2a,b show the temperature of the soils at 0.5 m depth under the natural ground that is 20 m away from the embankment side slope. It is found that the predicted temperatures (straight line) are well coincident with the simulated ones (dotted data), with R2 = 0.975, a mean error of 0.134 °C and a standard deviation of 0.702 °C (Fig. 2a,b). This statistical data substantiates that the HFM can well predict the temperature of the permafrost under the embankment. The good agreement between the simulation and the observation can be further substantiated from the temperature profiles in the natural borehole. As shown in Fig. 2c, the predicted temperature profile on April 20, 2002 is well agreed with the observed one. Similarly, in Fig. 2d, the predicted temperature profile is highly coincident with the observed one, with R2 = 0.963, a mean error of 0.029 °C and a standard deviation of 0.056 °C.
Soil temperature predicted by HFM. Location: at the natural borehole that is 20 m away from the side-slope toe (a) temperature serial at 0.5 m depth, with R2 = 0.975, Mean = 0.134 °C and Std = 0.702 °C, (b) temperature serial at 0.5 m depth, (c) on April 20, 2002, and (d) on October 19, 2002.
We further compare the predicted temperature profiles at the central borehole of the embankment to the observed ones. It is found that the predicted temperature near the embankment upper surface is greatly deviated from the observed one (Fig. 3). This great deviation is because the embankment is assumed to be completed as September 30 and the embankment temperature is assumed as 2 °C uniformly. These assumptions are somewhat unrealistic because the real construction of the embankment takes months and the temperature of the earthen filler is unknown. Despite this great deviation at near the ground surface, the predicted temperatures at deeper layer are well agreed with the observed ones (Fig. 3). As the heat of the embankment drains overtime and the influence of the initial temperature on the simulation vanishes, it is believed that the HFM can well predict the temperature of the soil under the embankment.
Soil temperature predicted by HFM. Location: at the central borehole. (a) on April 20, 2002, and (b) on October 19, 2002.
Here we compare the soil temperatures predicted by the TCM against the observed ones. To impose the TCM to the embankment surfaces, one must know T0, A, and ϕ in Eq. (2). In this study, the least square fitting method is used to fit the HFM-predicted ground-surface temperature to get T0, A, and ϕ in Eq. (2). The values of T0, A, and ϕ tabulated in Table 2 are used, while the others are the same as those used in the HFM.
It is found that the TCM can also predict the temperature of the soil under the natural ground. As shown in Fig. 4a,b, the temperature serial at 0.5 m depth is well coincident with the observed one, with a R square of 0.925, a mean error of 0.17, and a standard deviation of 1.213 °C. A close comparison between the predicted and observed temperatures reveals that when the temperature is close to the freezing/ thawing point (− 1 to 0 °C), the predicted temperature serial increases or decreases faster than the observed one (Fig. 4b). In reality, when the temperature of a soil is close to the freezing/thawing point, the soil needs more heat (cold) to increase (decrease) its temperature (Fig. 5a). But the TCM unrealistically supplies the sufficient heat (cold) to the soil such that the temperature at the ground surface follows a sinusoidal function (Fig. 5b,c). As a result, the TCM-predicted temperatures deviate somewhat from the observed ones, especially for temperature of the soils at shallow ground where they weather cyclic thawing and freezing annually (Fig. 4c,d). At deeper ground where the soil remains frozen, the predicted temperatures are well agreed with the predicted ones (Fig. 4c,d).
Soil temperatures predicted by TCM. Location: at the natural borehole that is 20 m away from the side-slope toe. (a) Temperature serial at 0.5 m depth, with R2 = 0.925, Mean = 0.17 °C and Std = 1.213 °C, (b) temperature serial at 0.5 m depth, (c) on April 20, 2002, and (d) on October 19, 2002.
During the freezing/thawing period, the TCM imposes more energy to the natural ground surface than the HFM does. (a) The entire year, (b) the thawing period, and (c) the freezing period.
As the temperature profiles and temperature serial in the natural boreholes and central borehole cannot represent the temperature of the entire embankment. Here we show the embankment’s temperature contours that are predicted by the HFM and the TCM, respectively. In case that the embankment has been built for five years, the daily mean temperature predicted by the HFM, in pattern and in magnitude, are highly similar with those predicted by the TCM (Fig. 6a,b). Using the HFM-predicted temperatures to minus the TCM-predicted ones, one can find the difference between the two modelings is about 0.1–0.2 °C (Fig. 6c), which is negligibly small and further implies that both models can predict the temperature of the soil under the embankment. Similar differences and similar patterns are found when the predicted embankment’s temperature contours in 10th year and 50th year are compared (Appendix B in Supplementary Information).
Comparison between the HFM-predicted temperatures and TCM-predicted ones after the embankment is constructed for 5 years. Date: On October 19. (a) HFM-predicted temperature, (b) TCM-predicted temperature, and (c) the HFM-predicted temperatures to minus the TCM-predicted ones.
To further understand the difference between the two models, we analyze the temperature profiles at the embankment central borehole and at the southern and northern side-slope toes. It is found that at the central borehole, the temperature profile predicted by the HFM is closely matched with that predicted by the TCM, especially within 5 year after the construction of the embankment (Fig. 7a). Almost the same difference is observed when compared is the temperature profiled predicted by the two models at 10 year after the construction of the embankment (Fig. 7b). As time elapses, the TCM-predicted temperature is about 0.1–0.2 °C higher than the HFM-predicted model, especially at the deeper layers (Fig. 7c). Similar differences and similar deviations between the two models are observed at the temperatures under the side slopes toes (Figs. 8 and 9). We do not know the reason why the TCM-predicted temperature is about 0.1–0.2 °C higher than the HFM-predicted model, a phenomenon that deserves further investigation.
The central-borehole temperature profile predicted by HFM is compared with that by TCM. Date: on October 27. (a) 5th year, (b) 10th year, and (c) 50th year.
The southern side-slope borehole temperature profile predicted by HFM is compared with that by TCM. Date: on October 27. (a) 5th year, (b) 10th year, and (c) 50th year.
The northern side-slope borehole temperature profile predicted by HFM is compared with that by TCM. Date: on October 27. (a) 5th year, (b) 10th year, and (c) 50th year.
This study is not intended to referee that the HFM is superior to the TCM, or vice versa. Each model has its advantage and disadvantage. The HFM mimics the natural heat transfer at the ground surface and thus can predict the temperature of the soil under the embankment more precisely. The HFM includes the influences of embankment thermal properties and weather data on the temperature of a permafrost stratum. It is thus capable to use the HFM to perform a sensitivity study about the influence of each parameter on the soil temperature. The HFM can help identify if variation of a specific parameter, such as solar reflectance, is favorite to preserve the permafrost under the embankment. If the deformation of the permafrost soil is concerned, it is preferred to use the HFM model to precisely predict the permafrost temperature so that the temperature-related deformation of the soil is estimated properly. In comparison, the TCM model is not a realistic boundary because the ground-surface temperature is not a rigidly sinusoidal wave. The TCM-predicted temperatures could deviate more from the observed ones. But the TCM can predict the temperature of the permafrost in a pattern that is similar to the observed one. As a result, if the trend of the temperature of permafrost under an embankment is interesting, the TCM is superior to the HFM because it is simple and it costs very little simulation time.
Currently, simulation of the temperature of permafrost soils under an embankment needs to guess some parameters. The TCM needs to reasonably guess the mean annual ground-surface temperature, T0, and the amplitude of this temperature, A. In this study, T0, A, and ϕ are regressed from the HFM-predicted temperature. As a result, the TCM-predicted temperature is coincident with the observed ones. However, in most cases, T0, A, and ϕ are unknown. Many documented articles states that T0, A, and ϕ are estimated on the basis of the adhesive layer theory, in which both T0 and A are some cesium degree greater than the local air temperature. But how to estimate both T0 and A is seldom explained. Table 3 lists T0, A, and ϕ that have been used to predict the temperature of permafrost under embankments in the Qinghai-Tibet Plateau. It can be seen that the T0, A, and ϕ vary greatly and that their values, sometime, are specified empirically and randomly.
While the HFM does not need T0, A, and ϕ, it needs to guess some parameters like sky clearness factor, solar reflectance and others. As the heat in the ground comes primarily from the sunlight, the most challenge of the HFM is to guess a reliable solar reflectance R on the upper surface. Although the R value of a surface can be measured, the true R value varies during the courses of day and year, with the lowest reflectance in summer and greatest value in winter12. It has been advocated that the use of energy-based R value to replace the true R so that the seasonal and daily variations of the solar reflectance at the embankment surface are weighed. The data for the energy-based R value, however, is very limited currently28. Specifying a reliable R value for the upper ground surface is thus challenged. Further studies are thus expected to understand the solar reflectance of ground surface in permafrost regions.
The HFM is helpful to select the right performance grading of an asphalt binder according to the climatic condition in the area of uses. In permafrost regions, asphalt pavement is preferred because its flexible properties are advantageously adapted to differential settlement that is caused by the warming of the underlying frozen soils29. Asphalt pavement is typically placed on the top of an embankment. It is critical to select the right performance grading of the asphalt binders to the right climate condition in the area of uses. Performance grading is a function of annual maximum and minimum pavement surface temperature, with one being the average seven-day maximum pavement temperature and the other being the minimum30,31. With the HFM, these temperature extremes can be precisely estimated according to the texture and color of the asphalt pavement and to the specific climatic conditions.
The HFM is powerful to estimate the heat gain and loss at the embankment surface precisely. The most concern heat flux component at the ground surface is the conductive heat flux, which mainly determines the temperature of the underlying frozen soils32,33,34. The HFM can reliably estimate the conductive heat flux to an embankment in a specific climate condition. Under the context of global warming, the HFM can be a useful tool to envision if the underlying permafrost can be cooled by varying embankment surface properties like albedo and emissivity. In addition to the conductive heat flux, how the radiant heat flux partitions at the embankment surface can be calculated. Understanding the heat flux balance at the ground surface is crucial to develop cool embankments and cool pavements for preserving the underlying permafrost under global warming.
The HFM is robust to find practical solutions to eliminate the thermal asymmetry of a roadway embankment in permafrost regions. After an embankment is built, the southern side slope absorbs more solar irradiance than the northern one does. As a result, the permafrost under the southern side slope is typically some Celsius degrees warmer than that under the northern one, a phenomenon that is termed as the sunny-shady effect and has been blamed as the culprit to the longitudinal cracks of the embankment35. Since this effect is caused by differential solar irradiance on both embankment side slopes, it can be mitigated by increasing the albedo of the southern side slope. But it remains unknown that for a specific embankment, increasing the albedo of the southern side slope to which degree can equalize the heat gain of both side slopes and thus eliminate the sunny-shady effect. The HFM can fill this knowledge gap and serves as a powerful tool to estimate the sunny-shady effect.
The HFM is indispensable to precisely calculate the deformation of warming permafrost under the embankment. Building embankment alters the thermal regimes such that the embankment absorbs more sunlight than the adjacent natural ground surface even if the surface materials are the same36. Plus the construction thermal disturbance, the permafrost underlain a roadway embankment has been found 0–1 °C warmer than the adjacent natural ground, especially in warm permafrost regions37. It has been observed that this temperature increment has caused 10–20 cm settlement to the embankment in warm permafrost region, and that the warming of permafrost still continues due to the global warming38. Correctly simulating the temperature increment caused by global warming and construction-induced warming is crucial to predict the embankment’s settlement, which is directly correlated to the damage of the embankment. As the HFM is far more reliable to predict the temperature of the underlying permafrost (Figs. 2 and 3), it is thus indispensable to foresee the serviceability of embankments in permafrost regions.
Other applications of the HFM may be vast but cannot be exhausted herein. For instance, the use of the HFM is not limited to the embankments in permafrost regions but also to those in seasonal frozen regions. It can be used to study on the influences of parameters like surface albedo, surface emissivity, surface roughness, pavement thermal inertia, and other controllable factors on the temperature of the underlying soils and of the pavement structures. It can be also adopted to estimate the impacts the uncontrollable factors like solar irradiance, wind speed, air temperature, and others on the soil temperature. Furthermore, it can be employed to estimate the temperature under embankments that is proactively cooled by inserting the embankment with thermosyphons, covering the side slope with crushed rock layer, and embedding the embankment with air convective duct, etc. While other applications of the HFM is unlimited and await further studies, this study is just a starting of the use of HFM to predict the temperature of permafrost under a roadway embankment.
This study proposed a heat-flux model (HFM) for the heat transfer at the upper surface of an embankment in permafrost regions. Different from traditional temperature-controlled model (TCM) that considers the annual ground-surface temperature varied as a sinusoidal wave, the HFM jointly considers the solar irradiance, heat convection, and thermal irradiance on the ground surface, as well as the shading effect of the embankment on the adjacent ground. The HFM model thus can be used to predict the influence of ground-surface thermal properties and local weather on the temperature of the permafrost under an embankment. The permafrost temperature predicted by HFM is compared against that observed ones. It is found that the HFM model can predict the permafrost soils’ temperature precisely, for instance, with R2 = 0.975, a mean error of 0.134 °C and a standard deviation of 0.702 °C. In comparison, the TCM-predicted temperature is also compared against the observed one. It is found that TCM predicts the permafrost soil temperature in a lower accuracy.
Temperatures predicted by the HFM are 0.1–0.2 °C lower than those predicted by the TCM, but the temperature-varying trend and temperature contour are similarly. It is concluded that if the temperature trend of the soil under an embankment is of concern, the TCM can be recommended if the mean annual ground-surface temperature and its amplitude can be guessed precisely. If the sensitivity of the weather data and ground-surface thermal properties on the permafrost temperature is of concern, the HFM is recommended but the solar reflectance of the ground surface must be weighted wisely. Further studies are expected to understand the energy-based solar reflectance of the natural ground surface and of the embankment surface so that the solar absorption in the HFM is weighted precisely. The HFM can be applied to guide the selection of the performance grading of asphalt pavement in permafrost regions, to understand the heat partition on the embankment surface, to understand the sunny-shady effect of embankments, to calculate the deformation of embankment, and explore other applications related to the HFM.
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Temperature (°C)
Ground-surface temperature (°C)
Air temperature (°C)
Dew point temperature (°C)
Bottom limit temperature (°C)
Upper limit temperature (°C)
Mean annual temperature (°C)
Heat capacity (J/(kg·K))
Equilibrium heat capacity (J/(kg·K))
Time (s)
Amplitude of the temperature (°C)
Solar irradiance (W/m2)
Beam irradiance (W/m2)
Beam irradiance on the side slope (W/m2)
Beam irradiance on the ground (W/m2)
Diffuse irradiance (W/m2)
Diffuse irradiance on the side slope (W/m2)
Diffuse irradiance on the ground (W/m2)
Solar irradiance on the side slope (W/m2)
Reflectance (–)
The net long-wave radiation (W/m2)
Downward thermal irradiance (W/m2)
Upward long-wave radiation (W/m2)
Heat convection (W/m2)
Evaporation (W/m2)
Conduction (W/m2)
Heat convection coefficient (W/(m·°C))
Wind speed (m/s)
Height (m)
Day number of the year (–)
Sky cleanness factor (–)
Height of the embankment (m)
Width of the shaded area (m)
Sky view factor (–)
Water content (–)
Latent heat of water (kJ/kg)
Density (kg/m3)
Heat conductivity (W/(m⋅K))
Thermal emissivity (–)
Stefan–Boltzmann constant (–)
Relative humidity (–)
Latitude (rad)
Solar declination angle (rad)
Solar hour angle (rad)
Solar zenith angle (rad)
Solar azimuth angle (rad)
Orientation of the embankment (rad)
Angle of the side slope (rad)
Azimuth of the side slope (rad)
Angular frequency (rad/s)
Phases (rad)
Unfrozen soil
Frozen soil
Water
Unfrozen water
Ice
Sky
Natural ground surface
Side slope
South-facing side slope
North-facing side slope
Qinghai-Tibet Highway
Qinghai-Tibet Railway
Qinghai-Tibet Plateau
Ran, Y. et al. Distribution of permafrost in China: An overview of existing permafrost maps. Permafrost Periglac. 23, 322–333. https://doi.org/10.1002/ppp.1756 (2012).
Article  Google Scholar 
Ma, W. et al. Remedying embankment thaw settlement in a warm permafrost region with thermosyphons and crushed rock revetment. Can. Geotech. J. 49, 1005–1014. https://doi.org/10.1139/t2012-058 (2012).
Article  Google Scholar 
Wagner, A. M. et al. Permafrost degradation and subsidence observations during a controlled warming experiment. Sci. Rep. 8, 10908. https://doi.org/10.1038/s41598-018-29292-y (2018).
ADS  CAS  Article  PubMed  PubMed Central  Google Scholar 
Pei, W., Zhang, M., Li, S., Lai, Y. & Jin, L. Enhancement of convective cooling of the porous crushed-rock layer in cold regions based on experimental investigations. Int. Commun. Heat Mass 87, 14–21. https://doi.org/10.1016/j.icheatmasstransfer.2017.06.019 (2017).
Article  Google Scholar 
Shang, Y., Niu, F., Lin, Z. & Sun, T. Analysis of the cooling effect of a concrete thermal pile in permafrost regions. Appl. Therm. Eng. 173, 115254. https://doi.org/10.1016/j.applthermaleng.2020.115254 (2020).
Article  Google Scholar 
Lu, Q., Zhao, D. & Wu, S. Simulated responses of permafrost distribution to climate change on the Qinghai-Tibet Plateau. Sci. Rep. 7, 3845. https://doi.org/10.1038/s41598-017-04140-7 (2017).
ADS  CAS  Article  PubMed  PubMed Central  Google Scholar 
Sun, B., Yang, L., Liu, Q. & Xu, X. Numerical modelling for crushed rock layer thickness of highway embankments in permafrost regions of the Qinghai-Tibet Plateau. Eng. Geol. 114, 181–190. https://doi.org/10.1016/j.enggeo.2010.04.014 (2010).
Article  Google Scholar 
Sun, H., Ge, X., Zhu, D., Niu, F. & Chen, J. Numerical investigation of the temperature field of a new convection-intensifying composite embankment in permafrost regions. J. Cold Reg. Eng. 33, 06018001. https://doi.org/10.1061/(ASCE)CR.1943-5495.0000174 (2019).
Article  Google Scholar 
Han, F., Yu, W., Yi, X., Hu, D. & Lu, Y. Thermal regime of paved embankment in permafrost regions along the Qinghai-Tibet Engineering Corridor. Appl. Therm. Eng. 108, 330–338. https://doi.org/10.1016/j.applthermaleng.2016.07.126 (2016).
Article  Google Scholar 
Qin, Y., Hiller, J. E. & Bao, T. Modeling cold region ground temperatures with a heat flux upper boundary model. J. Cold Reg. Eng. 27, 29–43. https://doi.org/10.1061/(ASCE)CR.1943-5495.0000051 (2013).
Article  Google Scholar 
Qin, Y. & Bao, T. Modeling geothermal regime in the Qinghai-Tibet Plateau: An examination of the upper-boundary condition. Arab. J. Geosci. 7, 855–864. https://doi.org/10.1007/s12517-013-0889-2 (2013).
Article  Google Scholar 
Liu, Z., Chen, J., Jin, L., Zhang, Y. & Lei, C. Roadbed temperature study based on earth-atmosphere coupled system in permafrost regions of the Qinghai-Tibet Plateau. Cold Reg. Sci. Technol. 86, 167–176. https://doi.org/10.1016/j.coldregions.2012.10.005 (2013).
Article  Google Scholar 
Zhang, M., Lai, Y., Gao, Z. & Yu, W. Influence of boundary conditions on the cooling effect of crushed-rock embankment in permafrost regions of Qinghai-Tibetan Plateau. Cold Reg. Sci. Technol. 44, 225–239. https://doi.org/10.1016/j.coldregions.2005.12.002 (2006).
Article  Google Scholar 
Qin, Y. & Tang, P. Effects of diurnal temperature rhythm on the geothermal regime under the embankment in Qinghai-Tibet plateau. Arab. J. Geosci. 4, 259–267. https://doi.org/10.1007/s12517-010-0166-6 (2011).
CAS  Article  Google Scholar 
Zhu, L. Study of the adherent layer on different types of ground in permafrost regions on the Qinghai-Xizang plateau. J. Glaciol. Geocryol. 10, 8–14 (In Chinese with English Abstract) (1988).
Qin, Y. & Hiller, J. E. Ways of formulating wind speed in heat convection significantly influencing pavement temperature prediction. Heat Mass Transfer 49, 745–752. https://doi.org/10.1007/s00231-013-1116-0 (2013).
ADS  Article  Google Scholar 
Orgill, J. F. & Hollands, K. G. T. Correlation equation for hourly diffuse radiation on a horizontal surface. Sol. Energy 19, 357–359. https://doi.org/10.1016/0038-092X(77)90006-8 (1977).
ADS  Article  Google Scholar 
Zhang, X., Yan, L.-E. & Qin, Y. Regulating solar absorptance for remedying thermal asymmetry of a roadway embankment. Int. J. Heat Mass Tran. 121, 64–71. https://doi.org/10.1016/j.ijheatmasstransfer.2017.12.151 (2018).
Article  Google Scholar 
Qin, Y., Tan, K., Yang, H. & Li, F. The albedo of crushed-rock layers and its implication to cool roadbeds in permafrost regions. Cold Reg. Sci. Technol. 128, 32–37. https://doi.org/10.1016/j.coldregions.2016.05.004 (2016).
Article  Google Scholar 
Lai, Y., Wang, Q., Niu, F. & Zhang, K. Three-dimensional nonlinear analysis for temperature characteristic of ventilated embankment in permafrost regions. Cold Reg. Sci. Technol. 38, 165–184. https://doi.org/10.1016/j.coldregions.2003.10.006 (2004).
Article  Google Scholar 
Lai, Y., Zhang, S., Zhang, L. & Xiao, J. Adjusting temperature distribution under the south and north slopes of embankment in permafrost regions by the ripped-rock revetment. Cold Reg. Sci. Technol. 39, 67–79. https://doi.org/10.1016/j.coldregions.2004.04.003 (2004).
Article  Google Scholar 
Liu, Z., Lai, Y., Zhang, M. & Zhang, X. Numerical analysis for random temperature fields of embankment in cold regions. Sci. China Ser. D 50, 404–410. https://doi.org/10.1007/s11430-007-2043-z (2007).
Article  Google Scholar 
Zheng, B., Zhang, J. & Qin, Y. Investigation for the deformation of embankment underlain by warm and ice-rich permafrost. Cold Reg. Sci. Technol. 60, 161–168. https://doi.org/10.1016/j.coldregions.2009.08.012 (2010).
Article  Google Scholar 
Chen, L., Yu, W., Yi, X., Hu, D. & Liu, W. Numerical simulation of heat transfer of the crushed-rock interlayer embankment of Qinghai-Tibet Railway affected by aeolian sand clogging and climate change. Cold Reg. Sci. Technol. 155, 1–10. https://doi.org/10.1016/j.coldregions.2018.07.009 (2018).
CAS  Article  Google Scholar 
Su, B., Li, N. & Quan, X. The numerical study on the ventilated embankment in permafrost regions in Qinghai-Tibet railway. Cold Reg. Sci. Technol. 38, 229–238. https://doi.org/10.1016/j.coldregions.2003.11.003 (2004).
Article  Google Scholar 
Qian, J., Yu, Q., You, Y., Hu, J. & Guo, L. Analysis on cooling effect of new hollow concrete brick revetment under gravel pavement in permafrost regions. Cold Reg. Sci. Technol. 85, 15–21. https://doi.org/10.1016/j.coldregions.2012.06.003 (2013).
Article  Google Scholar 
Yuan, C., Yu, Q., You, Y. & Guo, L. Formation mechanism of longitudinal cracks in expressway embankments with inclined thermosyphons in warm and ice-rich permafrost regions. Appl. Therm. Eng. 133, 21–32. https://doi.org/10.1016/j.applthermaleng.2017.12.118 (2018).
Article  Google Scholar 
Sailor, D. J. & Fan, H. Modeling the diurnal variability of effective albedo for cities. Atmos. Environ. 36, 713–725. https://doi.org/10.1016/S1352-2310(01)00452-6 (2002).
ADS  CAS  Article  Google Scholar 
Duojie, C. et al. Assessment of freeze-thaw cycles impact on flexural tensile characteristics of asphalt mixture in cold regions. Math. Probl. Eng. 2021, 6697693. https://doi.org/10.1155/2021/6697693 (2021).
CAS  Article  Google Scholar 
Ramadhan, R. H. & Al-Abdul Wahhab, H. I. Temperature variation of flexible and rigid pavements in Eastern Saudi Arabia. Build. Environ. 32, 367–373. https://doi.org/10.1016/S0360-1323(96)00072-8 (1997).
Hao, J., Cao, P., Liu, Z., Wang, Z. & Xia, S. Developing of a SBS polymer modified bitumen to avoid low temperature cracks in the asphalt facing of a reservoir in a harsh climate region. Constr. Build. Mater. 150, 105–113. https://doi.org/10.1016/j.conbuildmat.2017.05.200 (2017).
CAS  Article  Google Scholar 
Qin, Y., Liang, J., Huang, Z. & Tan, K. Painting the roadway embankment with non-white high reflective pigments to raise the albedo. Environ. Earth Sci. 75, 359. https://doi.org/10.1007/s12665-016-5273-6 (2016).
Article  Google Scholar 
Wang, Q., Fang, J., Zhao, X. & Hu, K. The influence of pavement type on the thermal stability of block-stone embankments in the warm permafrost region. Transp. Geotech. 23, 100334. https://doi.org/10.1016/j.trgeo.2020.100334 (2020).
Article  Google Scholar 
Liu, J., Tai, B. & Fang, J. Ground temperature and deformation analysis for an expressway embankment in warm permafrost regions of the Tibet plateau. Permafrost Periglac. 30, 208–221. https://doi.org/10.1002/ppp.2007 (2019).
Article  Google Scholar 
Wang, S. et al. The temporal effect of distress developments of frozen embankments in the permafrost regions along the Qinghai-Tibet Highway. J. Test. Eval. 47, 3059–3079. https://doi.org/10.1520/JTE20170487 (2018).
Article  Google Scholar 
Qin, Y., Huang, H., Ying, J. & Yang, T. Simulation of short-wave solar radiative transfer across a roadway embankment. Int. J. Heat Mass Tran. 108, 332–340. https://doi.org/10.1016/j.ijheatmasstransfer.2016.11.093 (2017).
Article  Google Scholar 
Qin, Y. & Li, G. Permafrost warming under the earthen roadbed of the Qinghai-Tibet Railway. Environ. Earth Sci. 64, 1975–1983. https://doi.org/10.1007/s12665-011-1014-z (2011).
Article  Google Scholar 
Qin, Y., Zhang, J., Li, G. & Qu, G. Settlement characteristics of unprotected embankment along the Qinghai-Tibet Railway. Cold Reg. Sci. Technol. 60, 84–91. https://doi.org/10.1016/j.coldregions.2009.08.002 (2010).
Article  Google Scholar 
Anderson, D. M. & Tice, A. R. Predicting unfrozen water contents in frozen soils from surface area measurements. High. Res. Rec. 393, 12–18 (1972).
Google Scholar 
Download references
This work is jointly supported by the high-level innovation team and outstanding scholar program in Guangxi colleges and the Science Foundation of Guangxi (No. 2018GXNSFAA294070, 2018GXNSFDA138009).
College of Civil Engineering and Architecture, Guangxi University, 100 University Road, Nanning, 530004, Guangxi, China
Tianyu Wang & Li-E. Yan
The Key Laboratory of Disaster Prevention and Structural Safety of Ministry of Education, Guangxi University, Nanning, 530004, China
Tianyu Wang & Li-E. Yan
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
T.W. and L.Y. wrote the manuscript text together and T.W. prepared the numerical simulation and all figures. All authors reviewed the manuscript.
Correspondence to Tianyu Wang.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Wang, T., Yan, LE. A heat-flux upper boundary for modeling temperature of soils under an embankment in permafrost region. Sci Rep 12, 13295 (2022). https://doi.org/10.1038/s41598-022-17529-w
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-17529-w
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Advanced search
Scientific Reports (Sci Rep) ISSN 2045-2322 (online)
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

source

Taiwan holds live-fire drills as China extends war games – Al Jazeera English

Taiwan’s top diplomat accuses China of simulating an invasion as Taiwanese and Chinese militaries conduct drills in Taiwan Strait.
Taiwan’s military has held live-fire artillery drills simulating a defence of the island as China continued the air and naval exercises it had launched in protest against US House Speaker Nancy Pelosi’s visit to the self-ruled territory.
Taiwanese officials say Tuesday’s drills, which involved soldiers firing howitzer artillery out to sea, had long been scheduled and were not a reaction to China’s unprecedented war games.
Shortly after the hour-long Taiwanese drills ended, China’s Eastern Theater Command announced that it was continuing its exercises in the seas and airspace around Taiwan.
The Reuters news agency, citing an unnamed source, also reported that about 20 Chinese and Taiwanese navy boats were locked in a “standoff” in the Taiwan Strait, with some of the Chinese boats attempting to “press” into the waterway’s median line, the de facto sea border between China and Taiwan.
China claims democratically governed Taiwan, an island of 23 million people, as its own and has called Pelosi’s visit there last week a violation of its sovereignty and a provocation by the United States.
The joint air and sea exercises it launched in response have been its largest in the Taiwan Strait and involved test launches of ballistic missiles over Taipei for the first time. They took place in six zones around the island and were scheduled to run for four days and end on Sunday.
But China’s Eastern Theater Command announced on Monday that it would extend the drills, focusing on anti-submarine and sea assault operations. It said maritime patrol aircraft, fighter jets, helicopters and a destroyer practised locating and attacking targets, including submarines, in the waters off Taiwan.
Tuesday’s drills, it said in a statement, focus on joint blockades and resupply logistics. It did not say when the extended exercises will end.
PLA Eastern Theater Command continued its joint combat training exercises on Tuesday in the waters and airspace around #Taiwan Island, focusing on joint blockade and support. (file pic) pic.twitter.com/o4bCiIdmSv
— People’s Daily, China (@PDChina) August 9, 2022

In the Taiwanese capital, Taipei, foreign minister Joseph Wu accused China of using Pelosi’s visit as an excuse to prepare for an invasion of the island.
“China has used the drills and its military playbook to prepare for the invasion of Taiwan,” he told reporters, calling the war games a “gross violation” of the territory’s rights.
“After the drills conclude, China may try to routinise its action in an attempt to wreck the long-term status quo across the Taiwan Strait,” he said.
Such moves threatened regional security and provided “a clear image of China’s geostrategic ambitions beyond Taiwan”, Wu said, urging greater international support to stop China effectively controlling the strait.
The scale and intensity of the Chinese exercises – as well as its decision to cut some communication with the US – has prompted concern in Washington, but US President Joe Biden has said he does not expect an escalation.
“I’m not worried, but I’m concerned they’re moving as much as they are. But I don’t think they’re going to do anything more than they are,” Biden told reporters at Dover Air Force Base on Monday.
A senior Pentagon official also told Reuters that Washington was sticking to an earlier assessment that Beijing would not try to invade Taiwan in the next two years. Under Secretary of Defense for Policy Colin Kahl said the US military would continue to carry out voyages through the Taiwan Strait in the coming weeks.
China, meanwhile, has defended its behaviour as “firm, forceful and appropriate”.
“[We] are only issuing a warning to the perpetrators,” foreign ministry spokesman Wang Wenbin told a regular briefing, promising China would “firmly smash the Taiwan authorities’ illusion of gaining independence through the US”.
“We urge the US to do some earnest reflection, and immediately correct its mistakes.”
Follow Al Jazeera English:

source

Assessment of thermal distribution through an inclined radiative-convective porous fin of concave profile using generalized residual power series method (GRPSM) | Scientific Reports – Nature.com

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 13275 (2022)
187 Accesses
Metrics details
The thermal distribution in a convective-radiative concave porous fin appended to an inclined surface has been examined in this research. The equation governing the temperature and heat variation in fin with internal heat generation is transformed using non-dimensional variables, and the resulting partial differential equation (PDE) is tackled using an analytical scheme, generalized residual power series method (GRPSM). Moreover, a graphical discussion is provided to examine the consequence of diverse non-dimensional variables including the parameters of convection-conduction, ambient temperature, radiation, heat generation, and porosity effect on the thermal field of the fin. Also, a graph is plotted to analyze the variations in unsteady temperature gradient using the finite difference method (FDM) and generalized residual power series method (GRPSM). The major result of this investigation unveils that as the convection-conduction parameter scale upsurges, the distribution of temperature in the fin diminishes. For the heat-generating parameter, the thermal distribution inside the fin increases.
Heat transfer is the transmission of energy induced by temperature variations and if two systems in contact have different temperatures, heat transfer occurs until thermal equilibrium is reached. The innovation of effective heat transfer liquids with elevated thermal conductivity and heat transfer coefficient is required to improve the efficiency of the heat transmission process and to reduce the cost and size of the relevant modules and devices. The suspension of tiny solid particulate in liquids is an effective method of increasing the thermal conductivity of liquids and thereby enhances the heat transference phenomenon. Using these kinds of liquids, several investigators explored the features of heat transferal1,2,3,4,5,6,7. On the other side, heat transfer is enhanced using the extended surface. Excessive heat is produced in machine parts in several industrial applications, which can lead to a variety of material flaws. Heat transfer through the extended surface of the apparatus is one strategy for avoiding material damage. A fin is an extended surface that is utilized to augment the rate of heat transference from the primary surface to the environment. It has extensive technological applications, namely air-cooled craft engines, compressors, nuclear reactors, heat exchangers, refrigeration, electrical and electronic apparatuses, and so on. Meanwhile, porous material fins have considerable advantages over conventional fins, and their research is one of the most comprehensive topics in the field of mass and energy transference. In the heat transferal scrutiny of permeable material fins, energy and mass transference of both solid and fluid media must be taken into account. Several analyses have been performed to explore efficient and productive methods of heat transferring through permeable finned surfaces. Ndlovu and Moitsheki8 discussed the one-dimensional heat transport and thermal aspects in a moveable porous straight fin of the uniform area of cross-section. With the impact of radiative, magnetic, and convective mechanisms, Madhura et al.9 depicted the features of the thermal field of a permeable longitudinal fin. The sinc collocation method was executed to study the thermal behavior of permeable fin by Nabati et al.10 under the influence of magnetic force. With the implementation of analytical procedures, Kundu and Yook11 determined the analytical approximation of the porous fin and thus investigated the heat transfer features of the considered fin. Considering the local thermal non-equilibrium model, Buonomo et al.12 researched the energy transfer aspects of a permeable rectangular extended surface. Implementing the spectral collocation method, Kumar et al.13 described the temperature and energy variation in a permeable trapezoidal extended surface with radiation phenomenon.
Fins with a non-uniform cross-sectional area, which contribute to a lighter structure, are recommended in airborne and space application fields over heavier rectangular-shaped fins, despite the fact that such lighter fin constructions are more complicated and costlier to produce. Aziz and Fang14 expounded on the thermal variations inside the straight fin of variable thickness. Further heat transfer aspects are discussed by considering various fin profiles namely trapezoidal, rectangular and concave. Using the DTM approach, Torabi et al.15 debriefed the thermal performance of radiative-convective concave profiled fin. The heat transference features of the concave parabolic extended surface were discussed by Kang16. Recently, Wang et al.17 employed the technique of DTM to examine the aspects of energy dissipation through a permeable fin of the inclined surface. The thermal performance and heat flow in a dovetail fin with internal heat production were probed by Goud et al.18. In the presence of convection and radiation, Jagadeesha et al.19 expounded on the thermal performance of a fully wetted semi-spherical fin using a non-Fourier heat conduction model. Several researchers have worked on solving ordinary differential equations using various techniques, including the differential transform method20,21,22,23,24, sinc collocation approach10, finite difference method25, spectral collocation method26,27, least square method28 and among others. Several of these methodologies are computationally complex because they are trial-and-error in nature or involve complicated symbolic calculations. The residual power series method (RPSM) is one of the analytical techniques which is broadly utilized to achieve an approximate solution because it does not necessitate any restrictive assumptions or linearization. This method can be employed effectively to the given problems and it is easier to achieve accurate approximate solutions without more complications. The RPSM is an innovative approach for procuring analytical Taylor series solutions for linear and nonlinear differential equations. As a result of applying the residual error notion, a series solution, as well as a truncated series solution, can be obtained. Arqub et al.29,30 applied the RPSM for solving the initial value problems. Using RPSM, Syam31 discussed the solution of the fractional-order Fredholm integrodifferential equation. Az-Zo’bi32 applied RPSM to analyze the numerical solution of the time-dependent motion of the van der Waals gas model. Refs.33,34,35,36,37,38 highlights the importance of fluid flow regarding various assumption via different geometries.
The majority of the studies were focused on analyzing the one-dimensional thermal distribution of the porous straight fin or fin with a tapered profile, as evidenced by the above investigations. Further numerical and analytical solutions are provided in other cases. Also, there are no detailed analyses with analytical solutions on the unsteady thermal distribution through a tapered inclined fin. Thus, the principal objective of this analysis is to scrutinize the unsteady temperature variance through an inclined concave porous fin with internal heating. Moreover, the temperature profile of the fin has been solved analytically using the generalized residual power series method (GRPSM).
The unsteady thermal performance of permeable concave fin with convection and radiation is studied. (L) and (W) are the length and width of the permeable concave fin with base thickness (t_{b}). The dissipation of heat to the ambient environment occurs due to the effect of radiation and convection at (T_{a}). The fin which is attached to an inclined surface at an angle (alpha) is considered in this analysis, as demonstrated in Fig. 1. It is assumed that the porous medium is saturated with a single phase, homogeneous, and isotropic fluid. Darcy’s model characterizes the interaction of a porous medium and fluid media. Another implication involves that the fin’s thickness is small in comparison to its length. The temperature inside the fin is also presumed to vary only in the x-direction, with the temperature variation in the y-direction being small enough to ignore.
Physical depiction of an inclined concave parabolic fin.
The transient energy transmission with the above-mentioned assumption is stated by the following governing equation (Torabi et al.15, and Ma et al.39):
where (h^{*}) is the convective heat transfer coefficient, (q^{*} (T)) signifies internal heat generation, (rho) is the density, (sigma) indicates Stefan–Boltzmann constant, (g) symbolizes acceleration due to gravity, (K) is the permeability, (c_{p}) represents specific heat, and (t(x) = left[ {Lambda left( {left( frac{x}{L} right)^{2} – 1} right) + t_{b} } right]) is the local semi-fin thicknesses.
The internal heat generation is presumed to be a function of temperature:
where, (q_{a}) denotes heat generation at ambient temperature, and (xi) is the heat generation parameter. As this analysis considers a finite-length fin with an insulated tip, there will be no heat flow through the tip of the fin. Thus, the relevant boundary conditions (BCs) for Eq. (1) are:
The appropriate non-dimensional terms involved in this study are:
Equation (1) and BCs are transformed to a non-dimensional form using Eq. (2) and Eq. (4) to yield,
The above equation includes radiation-conduction parameter (Nr) which is directly associated with the surface emissivity, fin taper ratio (C) that describes the concave tapered profile, convection-conduction parameter (Nc) is the ratio of convention to conduction, internal heat production parameter (Q), and porosity parameter (S_{H}).
Simultaneously with the help of Eq. (4), Eq. (3) yields,
Let (F) be a function of two variables (x) and (t) i.e.(F(x,t)) and consider the following PDE,
with initial and boundary conditions,
where, (Omega) is a differential operator and (g) denotes the source term.
Assume that the solution of Eq. (7) has the power series in the form shown below
Rewriting the Eq. (7) yields
To evaluate the coefficient functions, (Y_{i} (x),,,,i = 0 ldots k), kth residual function is defined as
Reiterating this operation to find the nth-truncated solution yields
Rearrange the Eq. (5) as:
Let the series solution be in the form
Applying the GRPSM to Eq. (13) gives
To obtain the coefficients (Psi_{k} left( X right),,,k = 1,2,3, ldots ,m), replace (k)th a truncated series of (Theta left( {X,tau^{*} } right)) in Eq. (15), and apply the below derivative formula on ({text{Re}} s^{k} left( {X,tau^{*} } right)) (Modanli et al.40),
For simplificantion, the values for the corresponding parameters are taken as (Nc = 2), (S_{H} = 0.5), (Nr = 3), (Theta_{a} = 0.2), (k_{r} = 0.1), (C = 0.1), (phi = 0.1), (gamma = 0.2), (Q = 0.8) and (alpha = {pi mathord{left/ {vphantom {pi 6}} right. kern-nulldelimiterspace} 6}). Upon substituting these values and with the use of BCs the coefficients of (Psi_{k} left( X right),;k = 1,2,3, ldots ,8) are determined,
Express the above coefficients in a truncation series and ({text{M}} = 0.5937942627) is the value obtained with the help of BC. Using the achieved (k)th truncated series in Eq. (14), the final series solution of the fin problem is represented as
An internal heat generation, natural convection, and radiation impact are taken into account in formulating the unsteady thermal model of an inclined concave porous fin. Equation (1) expresses the corresponding balanced heat equation and is converted to a PDE using dimensionless terms along with BCs. The obtained equation discloses that dimensionless parameters effect the thermal distribution of a porous fin. Subsequently, Eq. (5) is derived analytically using the elementary properties of the proposed technique. For the analysis of the inclination effect, Table 1 is provided to witness the variation in the transient thermal profile (Theta left( {X,tau^{*} } right)) of the inclined porous fin with respect to different angles of inclination (alpha). It is detected from this table, that thermal distribution diminishes from base to tip of the porous fin for all non-dimensional variables considered in the study (Nc = 1), (S_{H} = 10), (Nr = 1), (Theta_{a} = 0.1), (k_{r} = 0.1), (C = 0.1), (phi = 0.1), (gamma = 0.1), (Q = 0.8) at different values of inclination angle. The thermal profile signifies greater thermal distribution at (alpha = 0), resulting in a lower rate of heat transfer. Meanwhile, as the (alpha) value is modified ((alpha = {pi mathord{left/ {vphantom {pi 6}} right. kern-nulldelimiterspace} 6},,{pi mathord{left/ {vphantom {pi 3}} right. kern-nulldelimiterspace} 3},{pi mathord{left/ {vphantom {pi 2}} right. kern-nulldelimiterspace} 2})), the thermal profile of the fin reveals decreasing characteristics at all locations of fin length. The consequence of the aforementioned dimensionless parameters on the thermal gradient (Theta left( {tau^{*} ,X} right)) of the fin is graphically examined in this section. The nonlinear PDE (Eq. (5)) is solved using the finite difference method (FDM) technique in the domain (0 le X le L) and (0 le tau^{*} le T). Along with uniform mesh, the finite-difference approximation is applied in the direction of (X) and the step size of time and space domains are chosen as (Delta tau^{*} = Delta X = 0.001). Further, the present analysis (GRPSM) is compared with the numerical result (FDM) as displayed in Fig. 2 and they are found to be in excellent agreement. The significance of dimensionless parameters on the temperature deviance of the fin has been portrayed in Figs. 3, 4, 5, 6 and 7.
Validation of the present result with the numerical method.
(a) Nature of (Theta left( {X,tau^{*} } right)) for various (Nc) values (b) Nature of (Theta left( {X,tau^{*} } right)) for various (Nr) values.
(a) Nature of (Theta left( {X,tau^{*} } right)) for various (Theta_{a}) values (b) Nature of (Theta left( {X,tau^{*} } right)) for various (S_{H}) values.
(a) Nature of (Theta left( {X,tau^{*} } right)) for various (Q) values (b) Nature of (Theta left( {X,tau^{*} } right)) for various τ* values.
(a) Nature of (Theta left( {X,tau^{*} } right)) for (tau^{*} = 0.1) (b) Nature of (Theta left( {X,tau^{*} } right)) for various (tau^{*} = 0.3).
(a) Nature of (Theta left( {X,tau^{*} } right)) of solid non-porous fin (b) Nature of (Theta left( {X,tau^{*} } right)) of porous fin.
The impact of convective parameter (Nc) on the temperature distribution of the concave fin is seen in Fig. 3a for (S_{H} = 0.5), (Nr = 1), (Theta_{a} = 0.1), (k_{r} = 0.1), (phi = 0.1), (gamma = 0.1), (alpha = {pi mathord{left/ {vphantom {pi 6}} right. kern-nulldelimiterspace} 6}), (Q = 0.8), and (tau^{*} = 0.5) by considering different (C) values ((C = 0.1,{text{and}},C = 0.3)). It is detected that with a rise in the convective parameter ((Nc = 1,,3,,5)) thermal profile decreases. This is due to the effect of the natural convection on the concave surface of the fin. The convection will carry the heat on fin surface and hence helps in decreasing the heat and aids in fin cooling. With all the considered parameter (Nc = 1), (S_{H} = 0.6), (Theta_{a} = 0.2), (k_{r} = 0.1), (phi = 0.1), (gamma = 0.1), (alpha = {pi mathord{left/ {vphantom {pi 6}} right. kern-nulldelimiterspace} 6}), (Q = 0.8), Fig. 3b displays the impact of radiative parameter (Nr) on the thermal performance of the concave fin. The radiative parameter exhibits the same nature as that of the convective parameter, i.e., a decrease in temperature profile with increase in (Nr) (2, 4, 6). The radiation effect increases the transfer of heat from fin surface to the surrounding. Therefore, the reduction in temperature has been observed with rising in radiation parameter. The significance of ambient temperature (Theta_{a} left( {0,,0.3,,0.5} right)) on the fin thermal field of a concave inclined porous fin with (Nc = 1), (S_{H} = 0.2), (Nr = 1), (k_{r} = 0.1), (phi = 0.1), (gamma = 0.1), (alpha = {pi mathord{left/ {vphantom {pi 6}} right. kern-nulldelimiterspace} 6}), (Q = 0.8), and (tau^{*} = 0.5) is exhibited in Fig. 4a. The enhancement in ambient temperature results in an increase in thermal profile. This is because, (Theta_{a}) is the ratio of surrounding temperature to base temperature. Hence, with augment in (Theta_{a}) there is a decrease in the transmission of heat from fin surface to surrounding which leads to the increase in thermal profile. By setting (Nc = 2), (Nr = 1), (Theta_{a} = 0.3), (k_{r} = 0.1), (phi = 0.1),(gamma = 0.1) , (alpha = {pi mathord{left/ {vphantom {pi 6}} right. kern-nulldelimiterspace} 6}), (Q = 0.7), and (tau^{*} = 0.5), the effect of (S_{H}) on (Theta) of the fin has been revealed in Fig. 4b. The enhancement in (S_{H}) ((1,,3,,5)) leads to the reduction in the temperature profile. This is due to the fact that the porosity parameter helps in better interaction of surrounding air with the pores of the fin. Hence the porosity parameter helps in the fin cooling effect. The consequences of heat generation parameter (Q) on the (Theta) of the fin have been depicted in Fig. 5a with (Nc = 1), (S_{H} = 0.3), (Nr = 1), (Theta_{a} = 0.2), (k_{r} = 0.1), (phi = 0.1), (gamma = 0.1), (alpha = {pi mathord{left/ {vphantom {pi 6}} right. kern-nulldelimiterspace} 6}), and (tau^{*} = 0.5). Here the augment in (Q) ((0,,0.4,,0.8)) enlarges the thermal value along the axial length of the fin because of the presence of internal heat within the fin. The internal heat enhances the fin surface temperature therefore it decreases the rate of cooling from the surface of the fin. Figure 5b explicates the impact of (tau^{*}) on (Theta) of the concave porous fin. As the (tau^{*}) ((0.2,,0.3,,0.4)) values increase, the temperature improves remarkably under the consideration of (Nc = 1), (S_{H} = 0.1), (Nr = 1), (Theta_{a} = 0.1), (k_{r} = 0.1), (phi = 0.1), (gamma = 0.1), (alpha = {pi mathord{left/ {vphantom {pi 6}} right. kern-nulldelimiterspace} 6}), (Q = 0.8). Figure 6a and b demonstrate the variation in the unsteady thermal distribution of the concave inclined porous fin as a function of time in a three-dimensional (3D) plot for (Nc = 1), (S_{H} = 0.1), (Nr = 1), (Theta_{a} = 0.1), (k_{r} = 0.1), (C = 0.3), (phi = 0.1), (gamma = 0.1), (alpha = {pi mathord{left/ {vphantom {pi 6}} right. kern-nulldelimiterspace} 6}), and (Q = 0.8). In particular, in Fig. 6a, the value of (tau^{*}) is picked as 0.1, and for this value, a decrement in thermal variation has been discovered, whereas an increment in thermal variation is recognized for (tau^{*} = 0.3), as exhibited in Fig. 6b. A comparison of the thermal profile values of the concave inclined solid and porous fin has been performed to uphold the significance of modeled fin problem. For a better interpretation of the thermal variation of the concave inclined porous and solid fin, Fig. 7a and b are plotted when the parameter values are set to (Nc = 1), (Nr = 1), (Theta_{a} = 0.1), (k_{r} = 0.1), (C = 0.1), (gamma = 0.1), (alpha = {pi mathord{left/ {vphantom {pi 6}} right. kern-nulldelimiterspace} 6}), (Q = 0.8), and (tau^{*} = 0.5). At (X = 0), the thermal field value of the solid fin (left( {S_{H} = phi = 0} right)) is comparatively higher than the porous fin (left( {S_{H} = 10,,phi = 0.1} right)) and the same behavior is observed at all the considered values of (X) (0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6). Thus, it is deduced that the porous fin helps in thermal dissipation and thereby provides a higher heat transfer rate. The effect of the fin taper ratio is recognizable in all of the aforementioned thermal investigation cases, and it is determined that the temperature inside the fin decreases as the scale of (C) (0.1, 0.3) increases.
The current study explains transient thermal dispersion in a concave permeable fin exposed to convective-radiative heat transfer. The governing equation is nondimensionalized by employing non-dimensional terms, and the arising PDE is solved analytically using the GRPSM. The consequences of significant non-dimensional factors on the temperature gradient are also depicted utilizing graphical portrayal. The following are some of the most significant study results of the present research:
Unlike prior investigation, the heat transfer performance of the fin is effected not only by the radiation and convection mechanisms but also by the fin taper ratio, and inclination of the primary surface.
The thermal dispersal in the porous fin is elevated in increasing time.
With a greater level of fin taper ratio, the fin undergoes diminishing thermal dispersal.
As the convection-conduction and porosity parameter values rise, the thermal dispersal in the fin declines.
The temperature profile of the fin exhibits an enhanced nature for the raised heat-generating parameter.
The thermal dispersal in the fin drops as the magnitude of the radiation-conduction attribute rises.
It may be highly beneficial to a designer to select the tapered fin design with an inclined vertical surface for thermal effectiveness in a practical application such as latent heat thermal energy storage systems.
GRPSM provides an analytical solution for nonlinear differential equations and the obtained outcomes in this research work are in close agreement with numerical ones. The exactness of the proposed method signifies that GRPSM is an alternative to other techniques for solving nonlinear PDEs.
All the data are clearly available in the manuscript.
Thermal conductivity
Convection–conduction parameter
Angle of inclination
Time
Emissivity
Stefan–Boltzmann constant
Acceleration due to gravity
Fin taper
Permeability
Specific heat
Radiation–conduction parameter
Convective heat transfer coefficient
Density
Width of the fin
Non-dimensional temperature
Local semi-fin thicknesses
Porosity
Fin taper ratio
Semi-base thickness
Fin’s length (dimensionless)
Internal heat generation parameter (dimensionless)
Porosity parameter
Length of the fin
Time(dimensionless)
Internal heat generation
Volumetric expansion index
Fin axial distance
Temperature
Ambient
Base
Solid
Relative quantity
Aly, E. H. & Pop, I. MHD flow and heat transfer near stagnation point over a stretching/shrinking surface with partial slip and viscous dissipation: Hybrid nanofluid versus nanofluid. Powder Technol. 367, 192–205 (2020).
CAS  Article  Google Scholar 
Song, Y.-Q. et al. Bioconvection analysis for Sutterby nanofluid over an axially stretched cylinder with melting heat transfer and variable thermal features: A Marangoni and solutal model. Alex. Eng. J. 60, 4663–4675 (2021).
Article  Google Scholar 
Bilal, M., Arshad, H., Ramzan, M., Shah, Z. & Kumam, P. Unsteady hybrid-nanofluid flow comprising ferrousoxide and CNTs through porous horizontal channel with dilating/squeezing walls. Sci. Rep. 11, 12637 (2021).
ADS  CAS  Article  Google Scholar 
Madhukesh, J. et al. Physical insights into the heat and mass transfer in Casson hybrid nanofluid flow induced by a Riga plate with thermophoretic particle deposition. Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng. https://doi.org/10.1177/09544089211039305 (2021).
Article  Google Scholar 
Waini, I., Ishak, A., Pop, I. & Nazar, R. Dusty hybrid nanofluid flow over a shrinking sheet with magnetic field effects. Int. J. Numer. Methods Heat Fluid Flow 32, 1067–1091 (2021).
Article  Google Scholar 
Nadeem, M., Siddique, I., Awrejcewicz, J. & Bilal, M. Numerical analysis of a second-grade fuzzy hybrid nanofluid flow and heat transfer over a permeable stretching/shrinking sheet. Sci. Rep. 12, 1631 (2022).
ADS  CAS  Article  Google Scholar 
Algehyne, E. A. et al. Investigation of thermal performance of Maxwell hybrid nanofluid boundary value problem in vertical porous surface via finite element approach. Sci. Rep. 12, 2335 (2022).
ADS  CAS  Article  Google Scholar 
Ndlovu, P. L. & Moitsheki, R. J. Steady state heat transfer analysis in a rectangular moving porous fin. Propuls. Power Res. 9, 188–196 (2020).
Article  Google Scholar 
Madhura, K. R., Kalpana, G. & Makinde, O. D. Thermal performance of straight porous fin with variable thermal conductivity under magnetic field and radiation effects. Heat Transf. 49, 5002–5019 (2020).
Article  Google Scholar 
Nabati, M., Jalalvand, M. & Taherifar, S. Sinc collocation approach through thermal analysis of porous fin with magnetic field. J. Therm. Anal. Calorim. 144, 2145–2158 (2021).
CAS  Article  Google Scholar 
Kundu, B. & Yook, S.-J. An accurate approach for thermal analysis of porous longitudinal, spine and radial fins with all nonlinearity effects: Analytical and unified assessment. Appl. Math. Comput. 402, 126124 (2021).
MathSciNet  MATH  Google Scholar 
Buonomo, B., Cascetta, F., Manca, O. & Sheremet, M. Heat transfer analysis of rectangular porous fins in local thermal non-equilibrium model. Appl. Therm. Eng. 195, 117237 (2021).
Article  Google Scholar 
Varun Kumar, R. S., Sarris, I. E., Sowmya, G., Madhukesh, J. K. & Prasannakumara, B. C. Effect of electromagnetic field on the thermal performance of longitudinal trapezoidal porous fin using DTM-Pade approximant. Heat Transf. 51, 3313–3333 (2022).
Article  Google Scholar 
Aziz, A. & Fang, T. Alternative solutions for longitudinal fins of rectangular, trapezoidal, and concave parabolic profiles. Energy Convers. Manag. 51, 2188–2194 (2010).
Article  Google Scholar 
Torabi, M., Aziz, A. & Zhang, K. A comparative study of longitudinal fins of rectangular, trapezoidal and concave parabolic profiles with multiple nonlinearities. Energy 51, 243–256 (2013).
Article  Google Scholar 
Kang, H. S. Analysis of a concave parabolic fin with vertically cutting fin tip and variable fin base thickness. Int. J. Heat Mass Transf. 173, 121258 (2021).
Article  Google Scholar 
Wang, F. et al. LSM and DTM-Pade approximation for the combined impacts of convective and radiative heat transfer on an inclined porous longitudinal fin. Case Stud. Therm. Eng. 35, 101846. https://doi.org/10.1016/j.csite.2022.101846 (2022).
Article  Google Scholar 
Goud, J. S. et al. Role of ternary hybrid nanofluid in the thermal distribution of a dovetail fin with the internal generation of heat. Case Stud. Therm. Eng. 35, 102113 (2022).
Article  Google Scholar 
Jagadeesha, K. C. et al. A physical depiction of a semi-spherical fin unsteady heat transfer and thermal analysis of a fully wetted convective-radiative semi-spherical fin. J. Indian Chem. Soc. https://doi.org/10.1016/j.jics.2022.100457 (2022).
Article  Google Scholar 
Das, R. & Kundu, B. New forward and inverse solutions for wet fins generalized profiles with all nonlinear phenomena. J. Heat Transf. 143 (2020).
Zeeshan, A., Arain, M. B., Bhatti, M. M., Alzahrani, F. & Beg, O. A. Radiative bioconvection nanofluid squeezing flow between rotating circular plates: Semi-numerical study with the DTM-Padé approach. Mod. Phys. Lett. B (2021).
John Christopher, A., Magesh, N., Punith Gowda, R. J., Naveen Kumar, R. & Varun Kumar, R. S. Hybrid nanofluid flow over a stretched cylinder with the impact of homogeneous–heterogeneous reactions and Cattaneo-Christov heat flux: Series solution and numerical simulation. Heat Transf. 50, 3800–3821 (2021).
Article  Google Scholar 
El Ibrahimi, M. & Samaouali, A. Closed-form approximate solution for heat transfer analysis within functionally graded plate with temperature-dependent thermal conductivity. Compos. Struct. 271, 114140 (2021).
Article  Google Scholar 
Sowmya, G., Varun Kumar, R. S., Alsulami, M. D. & Prasannakumara, B. C. Thermal stress and temperature distribution of an annular fin with variable temperature-dependent thermal properties and magnetic field using DTM-Pade approximant. Waves Random Complex Media 0, 1–29 (2022).
Varun Kumar, R. S. et al. Exploration of transient heat transfer through a moving plate with exponentially temperature-dependent thermal properties. Waves Random Complex Media 0, 1–19 (2022).
Sun, Y. et al. Investigation of transient coupled conduction and radiation heat transfer in the linearly anisotropic scattering cylindrical medium by spectral collocation method. Int. J. Therm. Sci. 172, 107308 (2022).
Article  Google Scholar 
Weera, W. et al. Convective-radiative thermal investigation of a porous dovetail fin using spectral collocation method. Ain Shams Eng. J. 7, 101811. https://doi.org/10.1016/j.asej.2022.101811 (2022).
MathSciNet  Article  Google Scholar 
Biswal, U., Chakraverty, S., Ojha, B. K. & Hussein, A. K. Numerical simulation of magnetohydrodynamics nanofluid flow in a semi-porous channel with a new approach in the least square method. Int. Commun. Heat Mass Transf. 121, 105085 (2021).
CAS  Article  Google Scholar 
Abu Arqub, O., Abo-Hammour, Z., Al-Badarneh, R. & Momani, S. A reliable analytical method for solving higher-order initial value problems. Discrete Dyn. Nat. Soc. 2013, e673829 (2013).
MathSciNet  Article  Google Scholar 
Abu Arqub, O., El-Ajou, A., Bataineh, A. S. & Hashim, I. A representation of the exact solution of generalized lane-emden equations using a new analytical method. Abstr. Appl. Anal. 2013, e378593 (2013).
MathSciNet  Article  Google Scholar 
Syam, M. I. Analytical Solution of the Fractional Fredholm Integrodifferential Equation Using the Fractional Residual Power Series Method. Complexity 2017, e4573589 (2017).
MathSciNet  Article  Google Scholar 
Az-Zo’bi, E. A., Yıldırım, A. & AlZoubi, W. A. The residual power series method for the one-dimensional unsteady flow of a van der Waals gas. Phys. Stat. Mech. Appl. 517, 188–196 (2019).
MathSciNet  Article  Google Scholar 
Chu, Y. M., Nazir, U., Sohail, M., Selim, M. M. & Lee, J. R. Enhancement in thermal energy and solute particles using hybrid nanoparticles by engaging activation energy and chemical reaction over a parabolic surface via finite element approach. Fractal Fract. 5, 17 (2021).
Article  Google Scholar 
Zhao, T. H. et al. A fuzzy-based strategy to suppress the novel coronavirus (2019-NCOV) massive outbreak. Appl. Comput. Math 20, 160–176 (2021).
MathSciNet  MATH  Google Scholar 
Nazeer, M. et al. Theoretical study of MHD electro-osmotically flow of third-grade fluid in micro channel. Appl. Math. Comput. 420, 126868 (2022).
MathSciNet  MATH  Google Scholar 
Chu, Y. M. et al. Combined impact of cattaneo-christov double diffusion and radiative heat flux on bio-convective flow of maxwell liquid configured by a stretched nano-material surface. Appl. Math. Comput. 419, 126883 (2022).
MathSciNet  MATH  Google Scholar 
Zhao, T. H., Khan, M. I. & Chu, Y. M. Artificial neural networking (ANN) analysis for heat and entropy generation in flow of non-Newtonian fluid between two rotating disks. Math. Methods Appl. Sci. https://doi.org/10.1002/mma.7310 (2021).
Article  Google Scholar 
Khan, N. M., Chu, Y. M., Khan, M. I., Kadry, S. & Qayyum, S. Modeling and dual solutions for magnetized mixed convective stagnation point flow of upper convected Maxwell fluid model with second-order velocity slip. Math. Methods Appl. Sci. https://doi.org/10.1002/mma.6824 (2020).
Article  Google Scholar 
Ma, J., Sun, Y. & Li, B. Simulation of combined conductive, convective and radiative heat transfer in moving irregular porous fins by spectral element method. Int. J. Therm. Sci. 118, 475–487 (2017).
CAS  Article  Google Scholar 
Modanli, M., Abdulazeez, S. T. & Husien, A. M. A residual power series method for solving pseudo hyperbolic partial differential equations with nonlocal conditions. Numer. Methods Partial Differ. Equ. 37, 2235–2243 (2021).
MathSciNet  Article  Google Scholar 
Download references
The authors acknowledge the financial support provided by the Center of Excellence in Theoretical and Computational Science (TaCS-CoE), KMUTT. This research was funded by National Science, Research and Innovation Fund (NSRF), and King Mongkut’s University of Technology North Bangkok with Contract no. KMUTNB-FF-65-24. The authors would like to thank the Deanship of Scientific Research at Umm Al-Qura University for supporting this work by Grant Code: 22UQU4331317DSR18.
Department of Mathematics, Davangere University, Davangere, Karnataka, 577002, India
R. S. Varun Kumar & B. C. Prasannakumara
Department of Mathematics, M S Ramaiah Institute of Technology, Bangalore, Karnataka, 560054, India
G. Sowmya
Department of Information Technology, University of Technology and Applied Sciences, Al Mussanah, Sultanate of Oman
M. C. Jayaprakash
Department of Mathematics and Statistics, Riphah International University, I-14, Islamabad, 44000, Pakistan
M. Ijaz Khan
Nonlinear Analysis and Applied Mathematics (NAAM)-Research Group, Department of Mathematics, Faculty of Sciences, King Abdulaziz University, P.O. Box 80203, Jeddah, 21589, Saudi Arabia
M. Ijaz Khan
Mechanical Engineering Department, College of Engineering and Islamic Architecture, Umm Al-Qura University, P.O. Box 5555, Makkah, 21955, Saudi Arabia
Kamel Guedri
Center of Excellence in Theoretical and Computational Science (TaCS-CoE), KMUTT Fixed Point Research Laboratory, Room SCL 802 Fixed Point Laboratory, Science Laboratory Building, Departments of Mathematics, Faculty of Science, King Mongkut’s University of Technology Thonburi (KMUTT), 126 Pracha-Uthit Road, Bang Mod, Thung Khru, Bangkok, 10140, Thailand
Poom Kumam
Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, 40402, Taiwan
Poom Kumam
Intelligent and Nonlinear Dynamic Innovations Research Center, Department of Mathematics, Faculty of Applied Science, King Mongkut’s University of Technology North Bangkok (KMUTNB), 1518, Wongsawang, Bangsue, Bangkok, 10800, Thailand
Kanokwan Sitthithakerngkiet
Mechanical Engineering Department, College of Engineering, Prince Sattam Bin Abdulaziz University, Wadi ad-Dawasir, 11991, Saudi Arabia
Ahmed M. Galal
Production Engineering and Mechanical Design Department, Faculty of Engineering, Mansoura University, P.O. 35516, Mansoura, Egypt
Ahmed M. Galal
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
Conceptualization: R.S.V.K. and G.S., methodology: M.I.K. and M.C.J.; writing-original draft preparation K.G. and B.C.P., writing-review and editing: K.S. and A.M.G.; funding acquisition: P.K., investigation, supervision: B.C.P. and M.I.K. All authors have read and agreed to the published version of the manuscript.
Correspondence to Poom Kumam or Ahmed M. Galal.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Varun Kumar, R.S., Sowmya, G., Jayaprakash, M.C. et al. Assessment of thermal distribution through an inclined radiative-convective porous fin of concave profile using generalized residual power series method (GRPSM). Sci Rep 12, 13275 (2022). https://doi.org/10.1038/s41598-022-15396-z
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-15396-z
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Advanced search
Scientific Reports (Sci Rep) ISSN 2045-2322 (online)
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

source

StarX MusicX Lab Enters the era of Digital Content Creation with the Release of Its First AI-composed Songs – Yahoo Finance

BEIJING, July 19, 2022 /PRNewswire/ — Kunlun Tech’s social entertainment platform StarX MusicX Lab, specializing in AI composition, recently released five songs, all of which were composed by AI software. The five AI-generated content (AIGC) compositions are now available on more than 180 music platforms worldwide including Spotify, SoundClould, QQ Music and NetEase Cloud Music.
Music labels, singers and music producing organizations have started to use the AIGC songs StarX MusicX Lab produced. The songs, many of which have been recorded by mainstream artists in Indonesia and Malaysia, are already proving popular on StarX’s entertainment social platform StarMaker.
In the Web3.0 era, a new generation of platforms is on the rise. “AIGC is emerging as a key player in this new form of content creation,” says Kunlun Tech CEO Han Fang. “To this end, StarX MusicX Lab has started rolling out AIGC songs, providing a new kind of AI application scenario and giving us the freedom to let our imagination fly in terms of what is possible when it comes to content creation.”
The efforts by StarX MusicX Lab marked a material change in how AI-composed audio is produced. With the latest technological advances now having been converted into applications, AI can do what is truly imaginative, making a contribution to the harmony between the virtual and real worlds. Over time, more AI-originated creations are bound to go mainstream.
Based on AI application scenarios, the Lab is a part of Kunlun Tech dedicated to developing AI-composed musical tracks. With sophisticated and professional full-chain music production and worldwide distribution capabilities, the platform is able to deliver high-quality singles, soundtracks and ambient music to the four corners of the globe.
The Lab is equipped with a highly-efficient and low-cost AI composer, which provides creators with the capability of producing multiple forms of content, no matter whether what is created is destined for an application in social media, gaming and entertainment, film and television production, or a marketing campaign.
With the development and improvement of AI technology, AIGC will be more helpful than ever in terms of content creation by improving the efficiency and diversity of content production, while offering more dynamic and interactive content. The massive virtual world that is the Metaverse spans a wide range of sectors including AI, gaming and social media, among many others. In the medium and long term, AIGC can be expected to bring innovation to the virtual world and enhance the co-prosperity of all links in the industry chain by identifying and leveraging new growth points.
The next stages of development in the Metaverse require not only technological progress, but also content-side support. In 2021, Kunlun Tech completed its Metaverse portfolio and the build out if its AI-driven applications for social entertainment and information distribution. As AIGC evolves, the Metaverse business will serve as a new contributor to Kunlun Tech’s exponential growth.
China’s top Internet firms, including Byte and Baidu, have already entered and are quickly making progress in the realm of AIGC, while StarX MusicX Lab has already taken the lead in related technologies.
The digital human ecology built around the virtual world and the Metaverse infrastructure has begun to take shape, and so did the music ecology built around the new media of the Internet. The wide application of AI technologies will dramatically change how content is created. As AIGC evolves, StarX MusicX Lab will continue to expand its business footprint, as the firm further improves its creation capabilities, while producing exclusive songs for the world’s influencers.
Supported by increasingly stronger computing power, AI that features self-computing and greater adaptability will be a perfect match for content production needs by unleashing the vitality of content creation and by making the creative space more diverse and dynamic. With the popularity of AI products and the growing demands of fans, StarX’s creative content destined for application in the entertainment, audio, and social media sectors is bound to have even greater potential and room for development.
SOURCE Kunlun Tech
Tesla CEO Elon Musk raised the stakes in his court battle with Twitter on Friday, filing a counter lawsuit that accuses the social media company of fraud.
Apple and Amazon have thrown billions of dollars at sports media rights over the last few months, outbidding traditional competitors and spiraling the streaming wars into its next stage of battle.
Warner Bros. Discovery's recent HBO Max retreat may signal good things to come for competitor Netflix.
Box office receipts hit a nearly three-month low this weekend, but there's still time for a Hollywood ending.
AMC CEO Adam Aron has become a hero to retail investors amid the meme stock era, but one analyst argues that a new offering of AMC Preferred Equity (APE) shares is disingenuous and ultimately bad for investors.
After the company's sale setback, Kohl's is pivoting toward inclusion, premier denim, and a whole new fashion attitude.
Singer Nolan Neal, who was a contestant on both America’s Got Talent and The Voice has died. He was 41. Neal was found dead in his Nashville apartment on Monday, July 18, with no cause of death yet determined. That said, he did have a self-admitted history of drug abuse. His passing was announced …
So many things I saw on Ugly Betty were a lie.View Entire Post ›
Is "The Miz" in a new documentary series about Woodstock '99? Eagle-eyed viewers of Netflix’s recent three-part documentary series “Trainwreck: Woodstock ‘99” raised their eyebrows during the first few moments of Episode 1 when the camera passes over the crowd and a young, shirtless man who looks an awful lot like the Miz shouts “Woodstock ‘99 baby, yeah!” directly into the camera. The documentary series is the latest to explore the disastrous music festival that took place in 1999, three years
The star of Marvel's "She-Hulk" isn't afraid to use her clout to support trans rights, VFX artists facing "incredibly difficult" conditions and more.
News Corporation's (NWSA) better-than-expected fourth-quarter fiscal 2022 results are driven by gains from revenue growth across most segments and contributions from the recent buyouts.
When looking for the best artificial intelligence stocks to buy, identify companies using AI technology to improve products or gain a strategic edge, such as Google, Microsoft and Nvidia.
Are BTS's J-Hope and model Irene Kim more than just friends?
'Jeopardy!' is airing reruns while the quiz show is currently on hiatus before new episodes. 'Jeopardy!' fans had strong reactions to seeing Matt Amodio again before the 2022 Tournament of Champions.
The Tasty singer replied to Bey Hive members on social media.
The changes will let users silently leave group chats and control who sees their online status.
After reports that the Queen had invited Meghan Markle and Prince Harry to Balmoral, sources claim the Sussexes haven't been invited after all.
Pitt apparently has a "good list" and a "s**t list" for actors he's worked with over his career, according to his co-star.
Thought it’s only been a little over a week since Beyoncé dropped her seventh studio album Renaissance, the long-awaited project has already further cemented Queen Bey’s status in history as it’s landed at the number one spot on the Billboard 200 album chart.
'Grease' actor Eddie Deezen cannot face trial for his charges of assault because he is not mentally fit, according to a state order. Deezen was arrested in April.

source

Live news updates from August 8: China continues military drills around Taiwan, Falling tech stocks send SoftBank to $23.3bn loss – Financial Times

Expert insights, analysis and smart data help you cut through the noise to spot trends, risks and opportunities.
Join over 300,000 Finance professionals who already subscribe to the FT.
Then $69 per month
New customers only
Cancel anytime during your trial
OR
BEST VALUE – SAVE 20%
Then $74.75 every 3 months
Sign in
Check if your university has an FT membership to read for free.
We use cookies for a number of reasons, such as keeping FT Sites reliable and secure, personalising content and ads, providing social media features and to analyse how our Sites are used.
International Edition

source

The best places to live in North America – The Economist

For a look behind the scenes of our data journalism, sign up to Off the Charts, our weekly newsletter
OVER 630,000 people moved to North America from other parts of the world in the first half of 2022, a rise of 51% from the same period a year earlier. It is easy to see why. The region is home to some of the world’s most “liveable” cities, according to an index by EIU, our sister company. It ranks living conditions in 172 cities around the world, taking into account more than 30 factors related to education, culture, the environment, health care, infrastructure and stability. This year, every city in North America included in the index scored above 80 (out of 100), with an average of 88. That makes North America the second-most “liveable” region in the world, narrowly behind Western Europe. Which of its cities stood out?
Those looking for a new home may want to consider Calgary. The Canadian city scored 96 points, the most of any North American city in the region. It is not its first time at the top: Calgary has come first in the region twice before in the past decade. Vancouver, Toronto and Montreal filled the next three spots. Residents of all four Canadian cities enjoy top scores for health care and education. Canada’s rollout of covid-19 vaccine boosters and the quick reopening of schools during the pandemic aided its high marks.
The top ranked city in the United States was Atlanta, which came fifth overall. Los Angeles, the region’s biggest climber, rose to ninth place from 15th, thanks to big gains in the culture and environment category after it eased capacity restrictions for venues in February. New York, meanwhile, remained close to the bottom in 21st place—two below its pre-pandemic rank. The city scored poorly on stability and infrastructure (as New Yorkers worried about high crime rates or stuck on an ageing subway will understand). Mexico is not included in EIU’s North American index, but its cities were among the bottom 50 of the global survey. When it comes to liveability, it seems the further north you go the better. ■
A look at excess deaths suggest summers will become more deadly as temperatures rise
The country wants to resume its pre-war export levels by the autumn
The overturning of Roe v Wade has also pushed Democrats and women to the polls
Published since September 1843 to take part in “a severe contest between intelligence, which presses forward, and an unworthy, timid ignorance obstructing our progress.”
Copyright © The Economist Newspaper Limited 2022. All rights reserved.

source

Shambhala Music Festival Was an Extraordinary Experience – EDM Identity

Shambhala Music Festival this year was an incredible experience and worth the three years it took to come back to fruition. To give an accurate review of this year’s Shambhala, you must know what Shambhala encompasses. Shambhala music festival is a 3-day festival at the Salmo River Ranch in the gorgeous forests of British Columbia.
Though it’s advertised as a three-day festival, attendees can arrive as early as Tuesday, leave as late as the following Tuesday, and most do. This is an excellent way for attendees to beat the line traffic getting in, meet their neighbors, and decompress and sleep after the festival to prepare to drive home. Music starts Thursday, but sound camps throughout the campgrounds go all hours. Having been unable to attend Shambhala since 2019, I was excited to make my way back to the festival – and I was impressed by the experience.
Even with all the additional days to enter, it’s been anywhere from three to upwards of 16 hours with only one available entrance. In 2019, arriving at the early hour of 7am still had us waiting six hours to enter. This year, an additional entry was added for staff which maybe cut the line down but not by as much as you would think. Though many Shambhala veterans have mastered the best times to try and enter, other first-timers this year mentioned wait times ranging from two to nine hours. Issues were credited to new software and being short-staffed.
That being said, although Shambhala was understaffed this year, they held it together incredibly well. The staff was very attentive, and even though medical crews were picking up extra shifts, every call was handled with care and alertness. I truly commend the Shambhala staff and volunteers for holding together what could have been a problematic disaster. The shortage was barely noticeable while being in attendance, and all in all, the event was handled smoothly.
From the incredible lasers at the Pagoda stage to the intense bass at the AMP stage, absolutely nothing was lackluster. Everywhere you turned, there was some sort of fascinating piece to look at or explore. For example, inside the festival grounds, there was a treasure hunt that I followed. We would stumble upon a box and a QR code next to it.
That QR code led to a personality quiz that ended with a riddle. The answer to the puzzle would unlock the box, which had little trinkets to take, and then the next riddle would lead you to the next box. Ultimately, the final box contained Shambhala merchandise! This treasure hunt was a great way for us to interact and meet other attendees also trying to figure out the riddle.
At each stage, there was an art exhibit walk-through that contained some of the most remarkable pieces of art I’ve ever seen. One notable piece interacted with an app on your phone, which, when held up to the painting, made it slightly 3-D and made the painting move and transform like a trippy scenic clip.
Shambhala is superb in creating areas around the event grounds and near stages that ideally offer places to sit or lay down and still enjoy the music and production. One of my favorite hangout spots was sitting in the bench areas out by the Grove stage and hanging by the beachside of the Salmo River, listening to the Living Room stage.
I made it my mission to try every single vendor at least once, and some of the standouts for me were the warm ricotta balls, a great snack at the end of the night when it was colder, and the cold salad wraps, perfect for the sweltering sunny day. One of the better parts of the food vendors here compared to other festivals is that the portion sizes are larger; therefore, you get more bang for your buck.
The only concern I had with the meal amenities was that the food was only sold within the festival grounds, which was a bit of a walk for attendees out in further camping areas. In the future, it would be nice to see more of a camper’s “lounge/vendor” area, where attendees could grab a coffee, food, or merchandise closer to the festival grounds.
While some don’t enjoy this rule, I find that it creates the best atmosphere. Being someone that attends many festivals which sell and allow alcohol, I’ve seen that it can create disruptive and sloppy attendees and, in some cases, dangerous; when people mix alcohol with other substances. Rarely did I see any attendees being rude or unable to function. It was so refreshing to have a high-spirited and loving crowd around at Shambhala instead of seeing people passed out everywhere.
It was so fun seeing the buzzing excitement pulsing every time someone mentioned the return of Shambhala after three years. Additionally, A Hundred Drums gave a standout performance on Thursday, flowing through a tantalizing groove of heavy, deep bass that entranced the crowd and connected to the heart of Shambhala.
Trapeze artists, flow artists, and an incredible vocalist came together to put on a 45-minute complete show unveiling the new, upgraded stage. The artists of Le Cirque de la Nuit gave one of the best performances I have seen, adding elements of fire, heights, swords, and heavy structural objects while performing to a custom score by Hollywood composer Zain Effendi. The unveil showed the replacement of the old geodesic structure with a new updated dojo-inspired stage design.
Having become renowned for his past performances at the festival, it made sense for Excision to christen the newly developed stage with a performance. He delivered one of the best classic sets I have seen from him in a while, reminiscent of his earlier years. The energy level from him and the crowd was unmatched as he cycled through multiple genres and had every single person jumping and dancing.
This included the spectacular visual array CloZee brought to the Pagoda while blessing us with a new unreleased track she had with Ganja White Night. The Sponges and Defunk brought funky vibes to the Fractal Forest, while the DNB Girls Takeover threw down in an epic three-hour showdown. Additionally, Deathpact unveiled on Sunday that the mysterious artist is actually two artists, leaving attendees with more questions than answers on who they could be.
This year, the Shambhala antics were a highlight for me. Some of these moments include seeing a sporadic, fun lightsaber fight ensue in the food market, volunteering to teach a silly water aerobics class in the river, and seeing random dance circles pop up with someone towing a prominent speaker around.
Starting from the first day of attendance, I befriended neighbors around my campsite and created friends I will continue to hold in my heart. A crew of Canadian Shambhala veterans welcomed us into their inner circle and were adamant about showing us around new artists and spending time including us in their ventures.
From hanging out on a giant ducky in the middle of the river to watching one of their friends, Metafloor, absolutely crush it with some deep, bass-heavy beats at the Cedar Lounge, complete with their own dancing pole and gumball machine, this crew truly embodies the spirit of Shambhala. We even participated in their group’s themed outfits created by their merchandise line Swerve Supply Co.
A notable moment for many attendees was the number of animals in attendance. I’m not talking about service animals; this one is aimed at the farm animals. Starting Friday night, the cows in a nearby fenced-off pen managed to escape and roam around the campground tents. Though the cows were harmless, animals such as wild turkeys and bears, which are known to be more aggressive, were also roaming the campgrounds.
As the ‘farmily’ expands, a few logistical items can be reviewed to improve future experiences. Water stations this year were few and far between, as many of them were rarely full over the weekend. Many attendees in the ShambaLodging had to go inside the festival grounds even to get water. Additionally, the water stations were not distinctively marked within the grounds, and for newcomers, they proved challenging to find, especially as the heat levels rose.
Shambhala has proven time and time again that it truly is a safe and loving place that brings in not just an array of exquisite music but also the community festivals first began with. If you haven’t been yet, I strongly recommend it; you won’t regret the experience and the friends you make.
Website | Facebook | Twitter | Instagram | SoundCloud | YouTube

source

Digital Audio Workstations (DAWs) Market with Tremendous growth by 2029 – Ableton Live, Acoustica, Adobe – openPR

Permanent link to this press release:

All 5 Releases

source

Free Massive X Presets: 700+ Big Sounds To Download For The Native Instruments Synth – Magnetic Magazine

Native Instruments
In 2019, Native Instruments released an entirely new iteration of its flagship Massive VST synthesizer. Massive X was more than a simple update or UI change to its original modeling. No, Massive X was an entirely new synth that quickly became another powerhouse player in the plugin world of VST synths for music production.
Need More Free Sounds? Check This Out. 
But music production can be damn expensive, especially if you are new to music production or aren't bringing in thousands of dollars from your productions. So we did the heavy lifting for you and collected every free preset and sound we could find for the synth.
By the end of this article, you'll have a massive new library of expressive sounds that allow you to get the most out of this powerful wavetable synth.
This pack of presets and sounds for Massive X has a little something for everyone but certainly a little something extra for bass-loving producers. Right off the bat, you can check that this massive pack of sounds is filled with bass sounds, leads, keys, atmospheres, and more. This is a killer pack to have, regardless of the genres of music you are producing.
Check Out More Analog Emulation Sounds Here <<<
This is one of the most extensive free Massive X preset packs online for the synth and is the perfect thing for your arsenal of sounds.
TL;DR? Save this pack and get creative with it right away.
Snag These Vicious Antelope's Presets (50 Sounds)
This freebie includes 12 presets for Chillwave / Future Bass Genres using Massive X.
The collection of sounds takes its inspiration from artists such as Odesza, Flume, and San Holo. All three producers have been producing some of the best electronic music recently, with more signature and laid-back sound pallets. The pack includes 12 presets that are perfect for any producer looking to make music in the style of these artists.
Snag These From Genera Studios Here
A random assortment of different single patches to download, this library won't make or break your library but are still worth checking out if you need a random pad, shimmering key, or programmed string pattern. But if you're looking for more premium string VSTs, check out our deep dive here.
Snag These From Preset Patch's Here 
This pack comprises 25 great atmospheres and effect presets that showcase what Massive X can be capable of. The presets are perfect for various genres, from ambient to dubstep. They'll help you add some extra depth and character to your productions. This pack is worth checking out if you're looking for some new Massive X sounds!
Check Out More High-Level Production Tutorials Here <<<
And while you're there, be sure to check out the wealth of information and knowledge the website offers for music producers. They have a collection of marketing tutorials, a podcast, and an entire blog with a bit of everything for you to play with and get involved in.
Note that if you want to download this pack, you must give the company your email address and receive promotional material from them.
Snag These From SupremeJa Here
This is a killer collection of very experimental sounds for the synthesizer. 20 presets have been taken from the premium pack and included in this demo that you can snag for free. These presets are designed to push the boundaries of what is possible with synthesis. As such, they may not always produce pleasant-sounding results. However, for those willing to experiment, Vulcan provides a unique and powerful tool for sound design.
Note that if you want to download this pack, you must give the company your email address and receive promotional material from them. I recommend checking out the full premium pack if you like this demo pack.
Snag These From Spektralisk Here
This free demo pack contains ten excellent presets from the True Trance Sounds Volume 12 pack. The presets are perfect for creating trance music, and they sound great. The collection is of great value, and it's worth checking out. Not that, because this is just the demo of the total premium package that you can buy, this just has a small taste of everything you could be getting. But included in that tiny little taste are some great pluck, soaring leads, and aggressive bass synths that showcase what you can do with the plugin.
To download, you must have a working email address. The video below is for the whole pack, not just the free demo version, but it will give you an idea of what to expect.
Snag These From NatLife Sounds Here
This is a decent-sounding collection of 10 presets containing plucks, lead, and bass sounds.
The Essential Massive X by Sonorous is a small but decent-sounding collection of 10 presets containing plucks, lead, and bass sounds. The presets add extra depth and dimension to your music, and the overall sound quality is quite good. The only downside is that there aren't many presets to choose from, so you may get bored with the sound after a while.
The MIDI patterns and drum samples in the pack are a great bonus. They provide a great way to get started with creating your music.
Snag These From Sonorous Here
French developer Expressive-e has released a free pack of 20 original presets for Massive X. The presets include pads, leads, and experimental soundscapes. These sounds are perfect for electronic music production and provide a great starting point for exploring the possibilities of Massive X.
To download the pack, you must provide a valid email address. This is so that we can send you the link to the collection and any further instructions.
Snag These From Sonorous Here
This one includes pads, leads, plucks, keys, and bass sounds, for use in all music genres. These are high-quality sounds that can be used in any genre of music to add some flavor or spice up a track.
His website has some cool free stuff to download, so it is worth checking out. The website includes various music production-related things, making it a great place to find new and exciting things to add to your collection.
Snag These From ANNMS Here
If you're looking for a new preset pack to help you make a smooth-sounding trap and hip-hop beats, AngelicVibes has got you covered. Their preset pack contains over 40 presets for bells, synths, pads, and more, so you can find the perfect sound for your track. Whether you're just getting started in production or are a seasoned pro, this pack is sure to have something for you. So check it out and see what AngelicVibes can do for your music today!
You will need to enter in an email address to access this one. This is to ensure that only those who are interested in the content can access it. This also allows for a way to contact you should there be any issues with the download.
Snag These From AngelicVibes Here
Loop Legendz's "Soul Survivor" consists of 20 mellow drill-rap or trap presets with pads, plucks, leads, and bass sounds. You also get a collection of 75 drum hits as well to help flesh out your productions. The presets are perfect for creating atmospheric and emotive tracks, and the drum kit adds a layer of versatility and groove.
Snag These From Loop Legendz Here
Presets can be imported into the User Presets folder by opening the preset file and clicking 'import.' A preset file can be opened from anywhere on the user interface. It will be saved to the User Presets folder and accessed in the User category in the Browser.
Here are the steps you need to follow to load one of these free preset files to the User Presets folder:
Managing Editor at Magnetic Magazine – Former Marketing Manager at the Hyperbits Masterclass – Writer, Content Strategist, Music Producer, and Record Label Manager 

source

In ‘Court Night Live’, A&E Finds Spiritual Successor To ‘Live PD’ – Deadline

By Peter White
Television Editor
A&E is heading to court, live.
The cable network has ordered Court Night Live, a reality series that will bring live trials to television.
The series comes from Big Fish Entertainment, the company behind controversial series Live PD. Although it will air on Wednesday nights at 9pm, starting August 10, rather than on Friday and Saturday nights, Court Night Live appears to be the network’s spiritual successor to live cops series.
Summer Premiere Dates For New & Returning Series On Broadcast, Cable & Streaming
Deadline revealed that Live PD, which was one of the highest rated series on cable, was canceled in June 2020, in the wake of George Floyd’s death and after a controversy that video allegedly captured by the Live PD crew of the death of Javier Ambler during a police stop had been destroyed.

'Live PD' Successor 'On Patrol: Live' Scores Strong Opening For Reelz Despite Technical Glitch

A Live PD successor On Patrol: Live recently premiered to strong numbers on Reelz.
Court Night Live will be hosted by Vinnie Politan, the lead anchor for Court TV, and Judge Greg Mathis, who hosts Judge Mathis, with analysis from retired Judge Vonda Evans. It will see civil cases from across the country litigated live from pop-up courtrooms in Philadelphia, Tampa, and Chicago in front of a gallery of community members.
During each broadcast, viewers will have the chance to vote on the verdicts in select cases in real time via text message. Politan, Mathis, and Evans will provide context and bring their legal perspectives to viewers so that they can better understand how the wheels of justice turn.
Court Night Live is produced by Big Fish Entertainment. Dan Cesareo, Lucilla D’Agostino and John Zito are executive producers for Big Fish, Elaine Frontain Bryant, Shelly Tatro, and Sean Gottlieb are executive producers for A&E.
“Court Night Live will combine the inherent drama of live civil court proceedings with context and expert legal analysis, elevating the traditional court shows that have been a staple of the television landscape for decades,” said Elaine Frontain Bryant, EVP and Head of Programming for A&E.  “Court Night Live gives viewers a chance to experience public trials live in the virtual courtroom gallery on air.”

Subscribe to Deadline Breaking News Alerts and keep your inbox happy.
Broadcast networks’ fall lineups and schedules
New and returning series on broadcast, cable and streaming
Series that made it or didn’t make it in 2021-22
Signup for Breaking News Alerts & Newsletters
Get our latest storiesin the feed of your favorite networks
We want to hear from you! Send us a tip using our annonymous form.
Sign up for our breaking news alerts
Deadline is a part of Penske Media Corporation. © 2022 Deadline Hollywood, LLC. All Rights Reserved.

source

Flemington Borough Master Planning Process, Rezoning for Downtown Business District Moving Forward in August – TAPinto.net

source

Blake Masters' views on guns, immigration, abortion, Social Security – The Arizona Republic

source

Record the road with this audio-enabled front and rear dashcam – Mashable

TL;DR: As of August 8, you can get the Blackbox Dash Cam and Rear Camera(opens in a new tab) for just $44.99 instead of $119.99 — that’s a 62% discount.
A lot of wild stuff can happen while you’re driving. If something goes wrong, you likely want as much evidence that you’re not at fault as you can get, or at least you may want a video to see exactly what happened. For that, a dash cam might be helpful. The Blackbox HD Dash Cam and Rear Camera is a wide-angle dash cam(opens in a new tab) with its own internal storage, and it may even help you park. This intuitive dash cam is on sale for a limited time for $44.99, normally sold for $119. 
There are myriad reasons to have a dash cam installed in your car, and they aren’t all to prove your innocence in case you’re involved in an accident. When someone drives by blasting a song you can’t quite put a finger on, the Blackbox’s built-in audio recording system may have captured it so you can go home and realize Maroon 5’s “One More Night” still hits.
And yes, in case of an accident, the seamless loop recording can capture a constant feed that’s only recorded over when all 32GB of local storage is full. This dash cam set can also help keep you informed about what’s going on behind your car. About 29% of car accidents are rear-end collisions. Even if you’re responsible with your rearview mirror, you can’t always see everything going on behind you. Stay informed with the included rearview camera(opens in a new tab) to cover your back-end blindspot. If something happens, it might be useful to prove it’s not your fault. Or, if you need a little assistance when you’re parking, you can use the built-in parking assist system, accessible through the four-inch multi-language display. 
Whether you’re trying to preempt any accidents or just get a better view of your parking situation, an HD view could be a huge help. For a limited time, save 62% on a Blackbox Dash Cam and Rear Camera(opens in a new tab), on sale for $44.99 (Reg. $119). 
Prices subject to change.
More in Cameras

source

MBE Aug. 8: 808 and celebrate, chill yer bones, get down with new MJ Nebreda – KCRW

The date is August eighth (8/8), so you know we’re celebrating the prolific 808 drum machine! This device transformed music production in the ‘80s, and today can be instantly recognized in everything from underground beats to mainstream hits. Click play immediately for the instrumental version of Snoop’s “Drop It Like It’s Hot,” and stick around to listen out for that very special kick drum sound throughout the show. Cool points await you for your efforts.
Lean into the unexpected with us via “Bone Marrow Stem Cell” from Berlin-based duo EASTER, comprised of writer Stix Omar and producer Maximilian Boss. Equal parts intriguing and terrifying. 
Plus, Miami based, Caracas born MJ Nebreda is back with dance floor ready, genre-blending Latin-infused sounds off of her recently released EP “Sin Pensar.” We’re excited about this young artist on the rise, who you may recognize from Ambar Lucid’s MBE visit last month. 
Ready to get this week officially started? You’ve come to the right place.

More from Morning Becomes Eclectic
Latest
Anne Litt shares her take on the week in KCRW music.

Featured
Get the latest from KCRW in your inbox 3x a week.

source

2022 Kia EV6 vs. 2022 Tesla Model Y Comparison – J.D. Power

Reminiscent of when SUVs first became popular, electric vehicles (EVs) are quickly gaining traction. Virtually every automaker selling cars in the United States currently offers—or will soon—a fully electric vehicle. Those that haven't yet gone all-in on EVs are headed in that direction, offering a mix of hybrid, plug-in hybrid, mild-hybrid, and fuel-cell electric vehicles.
It's not just the luxury brands leading the charge (pun intended) toward electrification. Automakers such as Chevrolet (Bolt EV, Bolt EUV), Ford (F-150 Lightning, Mustang Mach-E), Hyundai (Ioniq 5), Kia (EV6), Nissan (Leaf), and Volkswagen (ID.4)—all known for accessible pricing with an emphasis on value—are getting in on the early action, offering affordable, dedicated EVs to the motoring public.
Korean automaker Kia recently launched its first dedicated battery-electric vehicle (BEV), the EV6 compact crossover SUV. The new EV6 signals the U.S. launch of Kia's 'Plan S' strategy that will deliver 11 all-new electrified models globally by 2026. It joins the award-winning Hyundai Ioniq 5, also new for 2022, packing a 1-2 EV punch from parent company Hyundai Motor Group (HMG).
In contrast, Tesla, the all-American EV maker led by CEO Elon Musk, has been producing all-electric cars non-stop since 2008. Despite increasing competition, the Texas-based automaker is widely considered the EV leader in the U.S. market.
If you're in the market for a new, all-electric crossover, you'll want to consider the EV6 and the Model Y, regardless of their maker’s EV pedigree or how long they've been on the market. What do these two electric crossovers have in common? What are their differences? This 2022 Kia EV6 vs. 2022 Tesla Model Y comparison will help you decide between the two.
2022 Kia EV6 Front Quarter View
2022 Kia EV6
Consumers will find that 2022 Kia EV6 pricing ranges from $42,695 to $57,695, including the $1,295 destination charge. All 2022 Kia EV6 SUVs qualify for a $7,500 federal tax credit, and, unlike some electric cars, the Kia EV6 is available in all 50 states. Supply, however, is limited, so check with your local Kia dealer for availability.
The 5-passenger EV6 comes in three trim levels: Light, Wind, and GT-Line. Kia says a fourth, performance-oriented trim—the 576-horsepower GT—will join the EV6 lineup next year. The Light trim comes with a single electric motor that drives the rear wheels, while the Wind and GT-Line are available in either rear-wheel drive (RWD) or dual-motor all-wheel drive (AWD). To get the dual-motor AWD setup, you'll pay an extra $3,900 (Wind) or $4,700 (GT-Line).
Kia provides five years of basic connected services free of charge on all EV6 trims. Basic features include trip-planning services, 911 Connect, maintenance alerts, remote charging, and more. Buyers may also purchase one of several other plans, gaining access to services such as roadside assistance, remote locking/unlocking, a car-finder, and more.
Buyers looking to get into a new Tesla Model Y will pay more. Shoppers will find that 2022 Tesla Model Y pricing ranges from $61,190 to $71,190, including the $1,200 destination charge. According to Tesla's website, the Model Y is currently available in Long Range and Performance trims. However, in April 2022, the automaker added a base Model Y trim—the first Model Y built at the company's newest Gigafactory in Austin, Texas. Tesla has allegedly offered some customers with existing orders the opportunity to switch to the Texas-built base Model Y.
Because Tesla has sold more than 200,000 electric vehicles in the U.S., the Model Y does not currently qualify for the federal tax credit. Auto industry lobbyists and some automakers are pushing for an expansion of the tax credits, however, so things may change relatively soon, which would benefit Tesla greatly. In the meantime, Model Y buyers can take solace knowing that Teslas are known for their resale value. Indeed, the 2022 Tesla Model Y ranks highest in the Premium Electric segment of the J.D. Power 2022 U.S. ALG Residual Value Awards. That might help take some of the sting out of not receiving the federal tax credit.
All-wheel drive is standard on every 2022 Tesla Model Y SUV, courtesy of dual motors. It offers standard seating for five passengers; the optional third-row seat expands passenger capacity to seven. Note, however, that the third row is very tight and meant for small children.
Various connected services come standard with the Model Y, including automatic collision notification, digital key, and remote access, which allows trusted drivers to access the vehicle if they need to borrow it. Tesla includes standard connectivity for eight years.
Advantage: Neither
The EV6 is less expensive and buyers are eligible for the federal tax credit, but the Model Y has standard AWD and class-leading residual values.
2022 Tesla Model Y White Front Quarter View
2022 Tesla Model Y 
The Kia EV6 is too new for inclusion in the J.D. Power 2022 Vehicle Dependability Study (VDS), which assesses owner-reported problems during the third year of ownership. The EV6 is not among the three highest-ranked models in the Compact SUV segment in the J.D. Power 2022 U.S. Initial Quality Study (IQS). The 2022 Kia EV6 comes with the following warranty coverage:
Like the Kia EV6, the Tesla Model Y is too new for inclusion in the 2022 VDS. Though the Model Y did take part in the 2022 IQS, it is ineligible for awards because Tesla Motors does not allow J.D. Power access to owner information in the 15 states that require the automaker's permission. However, the Tesla Model Y ranks second among Premium BEVs in the J.D. Power 2022 U.S. Electric Vehicle Experience (EVX) Ownership Study, which examines satisfaction among EV owners. The 2022 Tesla Model Y comes with the following warranty coverage:
Advantage: Kia EV6
2022 Kia EV6 Interior Dashboard
2022 Kia EV6
Along with its platform-mate, the Hyundai Ioniq 5,the 2022 Kia EV6 is the first new model from HMG to use the automaker's Electric-Global Modular Platform (E-GMP), which will underpin future electric Hyundai and Kia models. Characteristics of the platform include a long wheelbase, wide stance, and a low, flat floor directly under which the battery resides.
Speaking of batteries, Kia offers two battery packs on the new EV6. A smaller, 58-kWh pack goes into the Light trim, while a larger 77.4-kWh pack powers the Wind and GT-Line trims. Buyers can choose between a rear electric motor (RWD) and dual electric motors (AWD).
The Light trim's 58-kWh battery powers the rear wheels only, and output measures 167 hp and 258 pound-feet of torque. According to Kia, the EV6 Light can accelerate from zero-to-60 mph in 8 seconds flat. The Environmental Protection Agency (EPA) says the EV6 Light has a maximum range of 232 miles while consuming 29 kWh/100 miles.
The more powerful 77.4-kWh battery provides more power and quicker acceleration. With the larger battery and single rear motor, output increases to 225 hp while torque remains at 258 pound-feet, and Kia says zero-to-60-mph acceleration improves to 7.2 seconds. Notably, the larger battery and single motor provide the greatest driving range, EPA-estimated at 310 miles. According to the EPA, the energy consumption of the extended-range RWD model is also 29 kWh/100 miles.
Upgrading to the dual-motor AWD powertrain with the larger battery results in 320 hp and 446 pound-feet of torque. Kia says this combination results in zero-to-60-mph acceleration of 5.1 seconds. The maximum travel distance is 274 miles, and EPA energy consumption is 31.7 kWh/100 miles. According to Kia, the EV6 with RWD tops out at 115 mph, while AWD versions can hit 117 mph. Kia says the EV6 Light has no towing capability, but the Wind and GT-Line can tow 2,300 pounds when properly equipped.
The Kia EV6 makes it easy to add range to the battery pack quickly. It comes standard with multi-charging capability supporting 400- and 800-volt fast charging, making it compatible with fast chargers delivering from 50 kW to 350 kW of power. According to Kia, you can recharge the standard battery from 10 to 80 percent in under 18 minutes using a 350-kW fast charger. If you're in a hurry, you can add nearly 70 miles in less than five minutes using a 350-kW fast charger.
Additionally, under the Kia Charge Pass program, all new EV6 buyers receive 1,000 kWh of complimentary charging through Electrify America's nationwide charger network, which is usable during the first 36 months of ownership. That translates to about 4,000 miles for the RWD EV6 Light with the larger, 77.4-kWh battery pack.
Wind and GT-Line trims of the EV6 also come with Vehicle-to-Load (V2L) functionality, enabling owners to use their car as a mobile generator to power electrical appliances, devices, tools, and recreational equipment.
All versions of the 2022 Tesla Model Y use two motors—a 91-kW unit powering the front wheels and a 200-kW motor at the rear—giving it standard AWD. The Model Y has a redesigned battery pack that Tesla integrates into the SUV's structure. The EPA says the base Model Y can travel 279 miles while consuming 28 kWh of energy every 100 miles.
Essentially using the same electric motors, the 2022 Tesla Model Y Long Range is EPA-rated for 330 miles of range while consuming 28 kWh/100 miles. According to Tesla, the Model Y can accelerate from zero-to-60 mph in 4.8 seconds, and its towing capacity is 3,500 pounds with the available tow package.
For those seeking brisker acceleration, there's the Model Y Performance. According to Tesla, it can go zero-to-60 mph in 3.8 seconds, reaching a top speed of 155 mph. The Model Y Performance uses a 133-kW electric motor at the front and a 179-kW unit at the rear. The EPA says the Model Y Performance has 303 miles of range while consuming 30 kWh of electricity every 100 miles.
In contrast to other automakers, Tesla operates and maintains an exclusive network of public chargers. However, the automaker has recently said it will open its Tesla Supercharger network to all EV owners. Model Y owners can plug into these Level 3 DC fast chargers that provide broad coverage. The Tesla Superchargers can help reduce any range anxiety that Model Y owners may be feeling.
Advantage: Tesla Model Y
2022 Tesla Model Y Interior Dashboard Front Seats
2022 Tesla Model Y
Kia proudly states that the 2022 Kia EV6 comes standard with Drive Wise, a collection of 21 advanced driving assistance systems (ADAS). Highlights include automatic forward emergency braking, blind-spot warning (BSW) with collision-avoidance steering assistance, driver monitoring, forward-collision warning (FCW) with pedestrian and cyclist detection, rear cross-traffic warning with automatic rear braking, lane-departure warning (LDW), lane-keeping assistance (LKA), intersection turn assistance, navigation-based adaptive cruise control (ACC) with stop-and-go capability, automatic high-beam headlights, traffic sign recognition, Highway Driving Assist, and Safe Exit Assist.
Upgrade to the EV6 GT-Line and you get evasive steering assistance, a surround-view camera, Highway Driving Assist 2 (brings Level 2 ADAS, combining ACC with lane-centering assistance), and Remote Smart Parking Assist (RSPA).
To date, neither the National Highway Traffic Safety Administration (NHTSA) nor the Insurance Institute for Highway Safety (IIHS) has published crash-test ratings for the Kia EV6.
Like the EV6, the 2022 Tesla Model Y also comes standard with many ADAS. Features include FCW with AEB, BSW, LDW, and LKA. The standard Autopilot package provides Level 2 semi-autonomous driving assistance, leveraging ACC with stop-and-go capability and lane-centering assistance. The optional Enhanced Autopilot package adds automatic lane-change capability and Autopark automatic parking assist.
Despite the somewhat misleading name, the Model Y with the Full Self Driving (FSD) package cannot actually drive itself. It can, however, slow your Model Y automatically for red lights and stop signs on surface streets. To fully enjoy FSD's capabilities, you'll need to earn a high Safety Score. Consumers should also be aware that the technology is under scrutiny by federal regulators following several serious accidents involving Tesla drivers who were apparently using it.
Despite some of the challenges with its hands-free driving technology, Tesla achieves the highest score in the J.D. Power 2021 U.S. Tech Experience (TXI) Study, which surveyed owners of new 2021 model-year vehicles. Because Tesla does not allow public access to owner data without its permission in 15 states, the brand is not rank-eligible in J.D. Power studies. Therefore, it doesn't officially rank highest in the 2021 TXI Study. Nevertheless, Tesla's top score in the study suggests that owners are happy with the overall tech experience with their vehicles. Likely contributing to Tesla owner satisfaction are frequent over-the-air (OTA) software updates.
As of this writing, the NHTSA hasn't rated the crashworthiness of the 2022 Tesla Model Y. However, the structurally similar 2021 model earned the top rating of 5 stars in all crash tests, as well as 5 stars for rollover resistance. The 2022 Tesla Model Y earned a Top Safety Pick+ rating in IIHS evaluations.
Advantage: Tesla Model Y
2022 Kia EV6 Rear Quarter View Action
2022 Kia EV6
Front and center in the 2022 Kia EV6 are dual, side-by-side 12.3-inch screens—one for the instrument cluster and the other housing the vehicle's infotainment system controls. The wide, horizontal curved display features blue light-filtered screens that Kia says reduce eye strain and fatigue.
The EV6's standard infotainment system includes embedded navigation, wired Android Auto and Apple CarPlay, voice recognition, a built-in Wi-Fi hotspot, and a 14-speaker Meridian premium audio system with HD Radio and SiriusXM satellite radio. Bluetooth hands-free capability comes standard, as does wireless phone charging. The available head-up display features augmented reality (AR) technology that projects a 3D image onto the base of the windshield.
As mentioned above, the EV6 comes standard with Kia Connect, a collection of connected services to enhance the ownership experience. In a Kia first, OTA updates keep the maps and infotainment system current.
Sticking with the single-screen approach, the 2022 Tesla Model Y features a 15-inch touchscreen mounted horizontally atop the center stack. Unlike most EVs, the Model Y doesn't have a traditional instrument panel or many secondary switches, so you control almost everything via the giant touchscreen.
Like the EV6, the Model Y comes standard with factory navigation, OTA updates, natural-voice recognition, and a wireless charging pad. Unlike the EV6, Android Auto and Apple CarPlay are not available. Rather, Tesla offers built-in apps like Netflix and YouTube, various music-streaming apps, and an internet browser. Gamers will enjoy the fact that you can play video games on the Model Y's touchscreen, but only if the car is in Park.
Advantage: Kia EV6
2022 Tesla Model Y Blue Rear Quarter View Action
2022 Tesla Model Y
As mentioned earlier, the 2022 Kia EV6 rides on parent-company HMG's new E-GMP vehicle architecture, hallmarks of which are a long wheelbase and short overhangs with the wheels pushed out to the corners. Kia notes that the EV6's 114.2-inch wheelbase is the same as that of the much larger Telluride SUV. Combined with a flat vehicle floor, the result is an open, spacious cabin.
The EV6's dual screens contribute to a sleek, modern, minimalist but functional look inside the cabin. A free-standing center console houses the vehicle start/stop button, gear-selector dial, wireless charging pad, dual cupholders, and covered storage.
The EV6 has seating for five. The base Light trim has cloth and artificial leather-covered seats, while the Wind and GT-Line have fully synthetic leather seats. Heated seats come standard on all trims, while the Wind and GT-Line also get ventilated seats. A heated steering wheel is optional on Wind and GT-Line trims. All EV6 SUVs have rear-seat heat/air ducts and two USB-C charge ports.
Cargo room behind the second-row seats measures 24.4 cubic feet. Fold the rear seats down and cargo space climbs to 50.2 cubic feet.
As with the EV6, the 2022 Tesla Model Y offers a simple but functional cabin. The overall look and feel is minimalist and futuristic all at the same time. Tesla upholsters the Model Y's seats in vegan synthetic materials.
One key difference between the EV6 and the Model Y is that the Tesla offers an optional third-row seat, increasing passenger capacity from five to seven. Keep in mind, though, that passenger space in the optional third row is extremely tight.
Compared to the EV6, the Model Y offers significantly more cargo space, with 30.2 cubic feet behind the second row (26.6 in 7-passenger models). Maximum cargo space measures 72.1 cubic feet (67.9 in 7-seat models). The Model Y also has a front trunk, or "frunk," enabling owners to stow an additional 4.1 cubic feet of gear.
Advantage: Tesla Model Y
If you'd like to learn more about these electric crossover vehicles, be sure to read our expert review of the 2022 Kia EV6 and research the 2022 Tesla Model Y. To find out how people like you rate models in this segment, check out our ratings from verified vehicle owners.
Also, please keep in mind that while the information in this article was accurate and valid on August 6, 2022, it may have changed since that date. Always confirm product details and availability with the automaker's website or your local dealership.
Related Resources
Real insights from real owners
© 2022 J.D.Power. All rights reserved.
© 2019 J.D.Power. All rights reserved.

source

The best things to do around Sarasota for Aug. 11-17 – Your Observer

The Observer Media Group Inc. respects your privacy and values the relationship we have with you. We use technology to collect information that helps us enhance your experience and our products and services. The cookies we use help us understand what information and advertising are most useful and valuable. Please take a moment to review our Cookie Policy and Privacy Policy. By clicking “Accept,” you agree to our use of cookies and similar technologies.
‘How to Succeed in Business Without Really Trying’
7:30 p.m. at Manatee Performing Arts Center, 502 Third Ave. W.
$16.50-$38
Visit ManateePerformingArtsCenter.com.
Wouldn't it be great if you had a handy instructional guidebook to help you achieve all your hopes and dreams? Perhaps, but maybe also having all the answers would present a whole new host of problems. That's the crux of this drama, which takes its protagonist through a wide spectrum of experiences. Runs through Aug. 21
Frost
8 p.m. at Studio One @ Reflex Arts, 6260 N. Lockwood Ride Road,
$15-$25
Visit DingbatTheatre.org
The weather outside isn't frightful. But this show is so delightful. The Dingbat Theatre Project brings you the tale of Jack Frost borrowing elements from Russian, Slavic and Northern European folklore. This play is written by Luke Manual McFatrich and Emma Denson and inspired by "The Runaway Shadows" by L. Frank Baum.
Jazz Thursday at the SAM: Ona Kirei
5:30 p.m. at Sarasota Art Museum, 1001 S. Tamiami Trail
$20 for non-members
Visit SarasotaArtMuseum.org
Listen to the sultry jazz sounds of singer Ona Kirei and take in the sights of the Sarasota Art Museum in one fell swoop. The museum's galleries will be open to 7 p.m., and Bistro will be serving a dinner menu complete with beer, wine and cocktails. Kirei, born in Barcelona, released her debut album "Mirage" earlier this year.
Masters Rowing
8 a.m. at Nathan Benderson Park, 5851 Nathan Benderson Circle
Free
Visit NathanBendersonPark.org.
The USRowing Masters National Championships will be held at Nathan Benderson Park, featuring races in more than 200 masters categories. A master is a competitor who has attained or will attain the age of 21 during the current calendar year. Runs through Sunday.
 
Friday Fest: Big Night Out 
5 p.m. at Van Wezel Performing Arts Hall, 777 N. Tamiami Trail
Free 
Visit VanWezel.org.
Sarasota just isn't the same when the Van Wezel Performing Arts Hall is out of season. But Friday Fest was built to combat that very phenomenon. For four Fridays during the summer, the lawn at Van Wezel is transformed into a raucous outdoor party with the best bands in town. Big Night Out will take the stage on Friday evening, and Jah Movement will play the final Friday Fest in September. And after that, the venue will return to its normal action-packed scheduling.
Ballroom Florida
10 a.m. to 5 p.m. at John & Mable Ringling Museum of Art, 5401 Bay Shore Rd.
Free with museum admission
Visit Ringling.org
What do you know about Japan's Jazz Age? Not much? Then you're a perfect candidate for this exhibit, which features six evocative paintings by Japanese artist Enomoto Chikatoshi. These paintings depict taxi dancers at Ballroom Florida, which for a brief moment in time was a Jazz hot spot in pre-WW2 Tokyo. The era evaporated as war began, but the moment in time is eternally preserved by Chikatoshi's tasteful brushwork. 
 
‘We’re Doomed!’
7:30 p.m. at Bowne’s Lab, 1265 First St.
$12-$15
Visit FloridaStudioTheatre.org
How do you like your disaster movies? Do you like aliens destroying the world or zombies running through the streets? Whatever you like, the improv crew at Florida Studio Theatre will do their best to bring it to you. They'll tackle the rich and storied genre of the disaster movie but bring you some fresh laughs along the way.
Second Saturday at the SAM
11 a.m. to 5 p.m. at Sarasota Art Museum
Free
Visit http://SarasotaArtMuseum.org
The only thing better than a great art museum is a great art museum for free. The Sarasota Art Museum opens its doors to the public for no charge every second Saturday, which means you can visit exhibits like Katrina Coombs "I M(O)THER," which examines femininity, sexuality and spirituality in the modern world.
‘The Teenyboppers’
7:30 p.m. at Jervey Theatre, 140 W. Tampa Ave., Venice
$10
Visit VeniceTheatre.org
Come out and support the area's young improv artists. The Venice Theatre presents "The Teenyboppers," a group of teen artists who have been working all summer to sharpen their comedic instincts and repartee. Guest teaching artist Casey Berkery and the talented cast are waiting to make you laugh, and even they don't know how they'll do it.
 
‘Home is Us’ Book Signing and Talk
2 p.m. at Fogartyville, 525 Kumquat Court
Free
Visit wslr.org/fogartyville/
Author Dr. Jackie Ogega, a Kenyan-American survivor of gender-based violence, will talk about her mother's upbringing in Kenya and her fight to ensure a safe and equitable world for herself and her three daughters. The author's mother, Marcella, will be on hand, and Ogega will take questions about her memoir.
 
Monday Night Jazz: Valerie Gillespie Ensemble
7:30 p.m. at John C. Court Cabaret, 1265 First St.
$25-$39
Visit JazzClubSarasota.org.
Valerie Gillespie, who both sings and plays saxophone, will be backed by a talented group including bassist Steve Boisen, drummer Jean Balduc and keyboardist Jody Marsh at the Jazz Club's Monday Night Jazz Cabaret. Gillespie is based in the Tampa area, and her website says she is dedicated to preservation of live jazz.
 
Jazz Happy Hour: Akeim Esdaile
6 p.m. at Selby Library, 1331 First St.
Free
Visit SarasotaMusicArchive.org.
The librarian is not going to shush you. You're free to move and dance and vibe to the smooth guitar sounds of Akeim Esdaile, who specializes in modern jazz and improvisation. Selby Library will be the scene, and for an hour, it will be transformed from a sedate housing of knowledge into a swanky jazz cabaret. This event is the third and final edition of the Sarasota Music Archive's summer Jazz Happy Hour at Selby Library.
Derek Richards
7 p.m. at McCurdy’s Comedy Theatre, 1923 Ringling Blvd.
$25
Visit McCurdysComedy.com.
Derek Richards has made people laugh on Army bases across the world, and he's coming back to Sarasota to bring laughs to the McCurdy's Comedy faithful. Richards has worked in Las Vegas and USO tours for years, and he's a regular on SiriusXM Satellite Radio Network.
‘Let It Be’
7:30 p.m. at The Players Centre for Performing Arts, 3501 South Tamiami Trail, Suite 1130
$26.50
Visit ThePlayers.org.
There will be an answer. Let It Be. Follow this Players Centre for Performing Arts show, which tracks two families and their relationship as they work their way through the turbulent 1960's with the canon of Beatles songs as their soundtrack. This Aug. 17 performance is just a preview, and the show's regular run will conclude on Aug. 28.
Join the Neighborhood! Our 100% local content helps strengthen our communities by delivering news and information that is relevant to our readers. Support independent local journalism by joining the Observer’s new membership program — The Newsies — a group of like-minded community citizens, like you. Be a Newsie.
View the discussion thread.
Verified Audit
1101 Fifth Ave. Ste, 270 San Rafael, CA 94901
(415) 461-6006
www.verifiedaudit.com

source

Adaptive neuro fuzzy inference system modeling of Synsepalum dulcificum L. drying characteristics and sensitivity analysis of the drying factors | Scientific Reports – Nature.com

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 13261 (2022)
201 Accesses
Metrics details
The requirement for easily adoptable technology for fruit preservation in developing countries is paramount. This study investigated the effect of pre-treatment (warm water blanching time—3, 5 and 10 min at 60 °C) and drying temperature (50, 60 and 70 °C) on drying mechanisms of convectively dried Synsepalum dulcificum (miracle berry fruit—MBF) fruit. Refined Adaptive Neuro Fuzzy Inference System (ANFIS) was utilized to model the effect and establish the sensitivity of drying factors on the moisture ratio variability of MBF. Unblanched MBF had the longest drying time, lowest effective moisture diffusivity (EMD), highest total and specific energy consumption of 530 min, 5.1052 E−09 m2/s, 22.73 kWh and 113.64 kWh/kg, respectively at 50 °C drying time, with lowest activation energy of 28.8589 kJ/mol. The 3 min blanched MBF had the lowest drying time, highest EMD, lowest total and specific energy consumption of 130 min, 2.5607 E−08 m2/s, 7.47 kWh and 37 kWh/kg, respectively at 70 °C drying temperature. The 5 min blanched MBF had the highest activation energy of 37.4808 kJ/mol. Amongst others, 3—gbellmf—38 epoch ANFIS structure had the highest modeling and prediction efficiency (R2 = 0.9931). The moisture ratio variability was most sensitive to drying time at individual factor level, and drying time cum pretreatment at interactive factors level. In conclusion, pretreatment significantly reduced the drying time and energy consumption of MBF. Refined ANFIS structure modeled and predicted the drying process efficiently, and drying time contributed most significantly to the moisture ratio variability of MBF.
Synsepalum dulcificum (Sapotaceae) fruit known as miracle berry fruit (MBF) is an evergreen shrub that is native to West African tropical region1. The plant is known as Agbayun amongst the Yorubas of southwestern Nigeria2. It is of Sapotaceae family and grows to about 2–5 m high. The plant is hairless with smooth leaves that measured up to 0.05–0.1 m in length and 0.02–0.031 m in width; it has thin branches that clustered at the apex of the branch-lets3. S. dulcificum is of white flowers and its fruits measured around 0.0200–0.0205 m long4. The fruit is of high value to Yorubas due to its usefulness as a sweetener and because it is an ingredient in phyto-medicine concoction making5. When the fruit is licked, it deposits an active glycoprotein component called miraculin on the tongue. The action of miraculin is such that it binds to the tongue’s sweet receptor cells and suppresses the brain’s feedback of a sour taste by activating the sweet receptors hence resulting in a perception of sweet taste4.
Despite the high value placed on MBF in Nigeria, the poor post harvest plans for the highly perishable fruit is enabling the usually experienced shortages in the off-season production periods. Consequently, enormous quantity of MBF are wasted during the peak production season because of bountiful yield that meets with poor preservation plans; thereby forcing farmers to sell the harvests locally and at any cost possible. Therefore, studies concerning preservation, storage, and reuse of MBF, which are presently unfounded in the literature are crucial to enhance its utilization. To lessen these study gaps, this study proposed the application of practical, effective, and easy to implement drying technology for the preservation of MBF in a developing country like Nigeria where MBF grows, thereby creating a partway for the commercialization of dried MBF products.
Drying is a widely acceptable preservation technique for fruits and vegetables. It aids physical and chemical changes in food products and therefore reduces water activities, prevents microbial and enzymatic activities that otherwise encourage spoilage6. In a typical drying process, the dryer supplies the product with higher heat energy than ambient, and as the heat energy increased, the relative humidity of the drying air decreases. The reduced relative humidity decreases the air density and increases the moisture removal capability of the drying air as it moves over the product undergoing drying. At high temperature and low relative humidity, the vapour pressure of the product increases, thereby enabling the moisture migration from the internal part or core to its surface7 and to the environment.
Generally, the efficiency of the drying process and quality of the dried product are dependent on the chosen drying factors8. These requirements had led researchers to investigate several pre-treatment methods and dryer type for different fruits and vegetables. Considering the effect of pre-treatment of fruit and vegetables prior to drying for instance, Kaveh et al.9 established that pre-treating blackberry fruits with solution of ascorbic acid, blanching in hot water, blanching in microwave, and sonication prior to convective drying reduced specific energy consumption, drying time, colour change and shrinkage. Rojas et al.10 also concluded that pre-treatment with ethanol prior to apple fruit ultrasound-assisted convective and convective drying improved the moisture mass transfer rate, with reduction in shrinkage and rehydration capacity. Brar et al.11 as well showed that ascorbic acid chemical solution, potassium metabisulfite for 1 min at 40 °C and citric acid had significant decreased effect on the time of apple fruit drying. Tunde-Akintunde et al.12 concluded that hot water, steam, palm oil/water and groundnut/water blanching significantly reduces the drying rate of bell pepper. The literature review showed that pre-treatment prior to drying have profound positive effect on the efficiency of the drying process which is a strong considerable point for industrial commercialization.
Pre-treatment can be achieved through chemical (liquid and gas phase) or physical (thermal and non-thermal) method13; however, the clamour and government legislation favouring green processing and green products, justifies the utilization of physical pre-treatment method on fruit and vegetables. A simply achieved but effective physical pre-treatment method is thermal blanching. It is the process of heating the agro-produce rapidly to a predetermined temperature, holding it at that temperature over a choice resident time, followed by cooling or immediate subsequent processing14. Thermal blanching inactivates enzymes, significantly reduces the drying rate, improves the product quality, eliminates pesticide residues and toxic constituents, eliminates the air in products tissues, lessens microbial load amongst others15. Thermal blanching is techno-economically suitable to industrial or commercial applications. It is usually done at high-temperature-low resident time or low-temperature-high resident time to prevent tissue disruption or breakdown14. However, it is believed that low temperature blanching can minimize process resources amongst other benefits. Jeet et al.16 employed warm water (60 °C for 10 min) pre-treatment prior to drying of unripe banana slices. The choice of warm water pre-treatment is usually aimed at mitigating the usually experienced extreme loss in firmness of tender textured agro-produce after hot water blanching (70–100 °C)13. Presently, reports on warm water thermal blanching are still nascent and therefore forms a focus for this study.
Also considering the effect of dryer type for fruit and vegetable drying purposes, microwave-drying technique involving volumetric heating and internal vapor generation adopted by Demiray et al.17 shortens the drying time of onion when compared to pure convective drying method. Furthermore, the convective dryer has been reported to be less effective with drying time (leading to inefficient use of energy) and slightly decrease product quality (color and vitamin C amongst others) when compared to modern drying technologies like microwave, vacuum, infrared, hybrid ovens and others18. However, and despite the notable deficiencies of convective drying, the technique remains the most practicable method of drying especially in developing countries where cost of drying facility installation, operation, and maintenance requirements translate to a big challenge. The convective dryer is cheap to install, easily scaled for varied throughput, easily operated, and maintained. Therefore, utilization of convective drying method is still relevant despite the availability of competitive alternatives.
Modelling is an important endeavour for in-depth understanding, prediction, monitoring, rectification, controlling, alteration and redesigning of the process and equipments8. The thin layer models including empirical, theoretical, and semi-theoretical equations have been mostly utilized to analyze and explain drying processes in the last decades9. However, recent reports are suggesting the adoption of machine learning and artificial intelligent methods because of their perceived improved accuracies when compared to thin layer models. For instance, Yazdani19, Kaveh et al.9 and Sakar et al.20 applied artificial neural networks (ANN), Adaptive Neuro Fuzzy Inference System (ANFIS) and Gauss Process Regression Based Model (GPR), respectively, to drying of pineapple, orange and sweet potatoes for process modelling, prediction and optimization. Intelligent methods perform best when their structure is optimized before utilized for dataset approximation; however, most literature relied on subjective trial-and-error approach to specify the intelligent method’s structure and this can limit the effectiveness of the tool. More also, the investigation of optimum ANFIS structure (within given structure parameters) to drying data modelling is few in the literature. In addition to predictive modelling, the establishment of sensitivity analysis for a process is necessary to provide detailed information for decision-making21. Sensitivity analysis is a conscious platform for process determination and operation and in today’s knowledge advancement; the theoretical methods have been well developed such that it becomes intellectually short-changed to perform modelling without sensitivity analysis22. Literature review showed that sensitivity analysis of drying process with ANFIS is currently a gap in study.
This work contributes to knowledge by investigating the material-processing-product relationship that is specific to convectively dried warm water blanched MBF, represents the drying characteristics with an optimized ANFIS structure and investigate the sensitivity of the drying kinetics to drying factors using the optimized ANFIS structure. To the best of our knowledge, these are present gaps in the literature and their elucidation will form a partway to specific equipment, process and controller design and development for a potential MBF’s drying process industrial commercialization and also forms a precursor to MBF preservative plan that will contribute to food security especially in developing countries. The specific objectives were to (a) study the effect of physical pre-treatment (warm water blanching time—3, 5 and 10 min at 60 °C) and drying temperatures (50, 60 and 70 °C) at constant air velocity (1.2 m/s) on the drying characteristics [drying time (min), effective moisture diffusivity (m2/s), activation energy (kJ/mol), total energy consumption (kWh) and specific energy consumption (kWh/kg)] of convectively dried MBF (b) optimize the ANFIS network structure to model and predict the drying kinetics of MBF and (c) investigate the sensitivity of moisture ratio to the drying factors (pre-treatment type, drying temperature and drying time) using the optimized ANFIS structure.
In this study, the experimental research and field studies on plants, including the collection of MBF, complies with relevant institutional, national, and international guidelines and legislation. Freshly harvested MBF were sourced from a farmland in Ogbomoso Oyo State Nigeria after securing consent from the farmer who owns the farmland. The fruits were harvested, rinsed with distilled water, transported to the laboratory in a closed glass bottle and stored in a refrigerator (Heier thermocool, model 4523, UK) at a temperature of less than 4 °C. Prior to the drying experiment, MBF samples were allowed to thaw at room temperature (26–29 °C) for 1 h. The measured (using vernier calliper) approximate dimension of the MBF used in this study (considering 10 randomly selected samples) were; mass of 3.10 g, diameter of 0.013 m and length of 0.018 m.
Warm water blanching pre-treatment of MBF samples were achieved by dipping samples in warm water (60 °C) for 3, 5 and 10 min, respectively in accordance with the method of Taiwo and Adeyemi23. At the completion of the specified resident time in the warm water medium, the samples were removed and wiped dry with tissue paper. The samples were then allowed to attain room temperature by placement on aluminium foil and exposure to air. Thereafter, the samples were subjected to specific drying procedure as described in the next sub-section.
The contribution of warm water blanching pre-treatment at different dipping times and different drying temperature on the drying characteristics of MBF were determined. The differently pre-treated MBF were dried in a convective hot air oven (SG-90526—model, Stangas—company, Italy—country) as previously used by the same authors at nutritive quality preserving temperatures of 50, 60, and 70 °C, and at a constant dryer air velocity of 1.5 m/s. The ambient air temperature varied between 28 and 33 °C. At each selected drying temperature, the dryer was allowed to run for 30 min so that a uniform temperature state throughout the drying chamber was achieved before the introduction of selected experimental MBF samples. In each drying run, an approximately 200 g of pre-treated MBF were spread evenly on a tray and in a single layer within the steady state dryer. The instantaneous weights of the sample undergoing drying were determined firstly at 10 min interval during the early stages of the drying process and later at 30 min interval at the later stages of the drying process. This was achieved by discontinuously weighing the sample on digital weighing balance (± 0.01 g precision) and repeated severally until a constant MBF sample weight was observed. Experiments were done in three replicates for the purpose of data integrity and the mean of the replicates were used to describe the drying characteristics of the MBF samples. The initial moisture content of the un-blanched, 3 min, 5 min and 10 min warm water blanched samples were determined to be 10.91%, 11.03%, 11.14% and 11.43%, respectively by using the oven dried method at 105 °C for 24 h24,25.
The drying characteristics of MBF were evaluated by determining the moisture ratio, effective moisture diffusivity (EMD), activation energy, and energy consumption. In addition, ANFIS network structure was refined for the multidimensional predictive modelling of the drying process; and applied for the sensitivity analysis of moisture ratio to the individual and interaction of drying process factors used in this study.
The moisture content is a subset of moisture ratio. It was therefore calculated first using Eq. (1) as employed by Bousselma et al.26.
where Mc is the moisture content (d.b), Ww is the sample wet weight (g), and Dw is the samples dry weight (g).
Thereafter, the moisture ratio throughout drying was calculated with Eq. (2)
where MR represents the moisture ratio, Mt represents the moisture content (g water/g dry matter) throughout the drying time, Mo represents the initial moisture content (g water/g dry matter), and Me represents the equilibrium moisture content (g water/g dry matter) of the MBF.
EMD is an important drying characteristic that describes the moisture transportation rate from the sample’s internal component to the sample’s surface27. Previous studies by Motevali et al.28 and Sarvestani et al.29 showed that moisture transport could be investigated by the use of Fick’s second law of diffusion. Sarvestani et al.29 used Eq. (3) as the Fick’s second law of diffusion for sphere shaped sample like MBF.
The solution to Eq. (3) is represented by Eq. (4) in one-dimensional spherical system.
At long drying time (n = 1), Eq. (4) reduces to Eq. (5)
where Deff is the representation of effective moisture diffusivity (m2/s), r is the representation of radius of the fresh fruit and t is the representation of time (min). The EMD was then determined by applying the slope method where the plot of Ln MR versus t gives a straight-line curve with slope KL as represented in Eq. (6).
This refers to the energy required for the initiation of moisture migration from the sample’s core to its surface before being evaporated to the environment. In accordance with the method employed by Motevali et al.28, activation energy was established with Arrhenius equation given in Eq. (7).
where Ea represents the activation energy (kJ/mol), T represents the absolute temperature (K), R represents the universal gas constant (8.3 kJ/mol), and Do represents the Arrhenius equation’s pre-exponential factor (m2/s). Simply, Ln ({text{D}}_{{{text{eff}}}}) was plotted against the T−1 to derive the activation energy.
Adopting the method of Tunde-Akintunde30 and İsmail et al.31, the energy consumption was determined. The total and specific energy consumption were determined using Eqs. (8) and (9), respectively.
where ({text{E}}_{{text{t}}}), ({text{E}}_{{text{s}}}), ({text{A}},;{text{v}},;{uprho }_{{text{a}}} ,;{text{c}}_{{text{a}}} ,;{Delta T},;{text{D}}_{{text{t}}}) and W0 are the total energy required for drying (KWh), specific energy consumption (KWh/kg), the tray area (m), air velocity (m/s), the air density (kg/m2), specific heat capacity of the drying air (kJ/kg °C), temperature difference (°C), time of drying (h) and initial weight (kg), respectively.
ANFIS is a representation of Sugeno fuzzy inference system. It is a hybridization of ANN and Fuzzy logic (FL) and models multiple input data relating to a single output data27. The FL part of ANFIS matches or maps the input data characteristics to input membership functions, input membership function to rules, rules to a set of output data characteristics, output characteristics to output membership function and the output membership function to the output. The outline of the membership function is proportional to values that are adjustable in other to change the outline of the membership function32. In furtherance, the ANN part of ANFIS plays the role of automatically adjusting the parameters of the FL membership function and thereby optimizing its structure in the process. ANN achieves the membership function structural adjustment using a back propagation algorithm or with a least square approximation type of method. The parameters associated with membership functions change through the learning process. FIS learn and develops rules from data during a training process for approximation. A generalized model of ANFIS structure consisting of two factors contribution or inputs—a and b is represented in Fig. 1.
The ANFIS network structure.
The rules of a typical ANFIS structure is represented in Eqs. (10–13) as follows;
In Fig. 1, the input layer consists of two inputs ‘a’ and ‘b’. The input Layer 1 as represented by Eq. (14) is the crisp inputs for the system under consideration, ({text{O}}^{1}) is a representation of the layer, and i is the representation of ANFIS node.
In layer 2, the given crisp input data are conformed into a fuzzy space using a membership function of choice. This process is referred to as fuzzification, hence the layer is known as fuzzification layer. This layer has adaptive nodes as represented in Eq. (15) and (16); μAi and μBi are the representation of the input membership functions.
Layer 3 is referred to as the firing strength layer of the structure. This layer determines the product of the degrees to which the input factors fits into the membership function of choice and it is depicted in Eq. (17).
Layer 4 is termed as the normalization layer. The ratio of the firing strength of each rule is calculated with respect to the sum of the firing strengths of all the rules. The layer also has fixed nodes as depicted in Eq. (18).
Layer 5 is termed as defuzzification layer, it is represented in Eq. (19). The layer consists of the consequent parameters of the fuzzy rules. The neurons in this layer are very connected to the normalization neuron.
Layer 6 produces the total output for each input in the fuzzy space, which equals the sum of inputs in layer 5. It is represented in Eq. (20).
The type and number of membership function are the two most important parameters that affect the performance of ANFIS network structure for classification, modeling and clustering. In this study, the best-tuned choice of these two parameters was investigated. Effect of four membership functions types (trimf, pimf, gbellmf and gaussmf) and three numbers of each membership function (2, 3 and 5 mf) on the accuracy of the built ANFIS network structure for modeling and prediction of the MBF drying data was investigated. The drying data set were partitioned into training (60%), checking (15%), and testing (25%) for the entire ANFIS model network structure development in conformation with the acceptable standard33.
The investigation of the level of contribution or importance of each drying factor (or combination of drying factors) to the performance of the drying process (as measured by a characteristic drying indicator) is crucial for an in-depth understanding of the process and also crucial to making operational decision for the process. Such investigation represents the sensitivity of a process characteristic or performance indicator to the process factors. In this study, the sensitivity of MFB’s moisture ratio during drying to each drying factor (pretreatment type, drying time, and drying temperature) and combination of drying factors were evaluated using ANFIS. The contribution of the individual drying factor (or combination of drying factors) to the prediction accuracy [as measured with root mean square error (RMSE)] of the moisture ratio was utilized as the yardstick to determine the sensitivity. Hence, an individual drying factor (or a specific combination of drying factors) that has lower RMSE contribution to the prediction of moisture ratio is more sensitive than an individual drying factor (or a specific combination of drying factors) that has a higher RMSE contribution to the prediction of moisture ratio.
The effect of pretreatment and drying temperature on the moisture ratio variation of MBF is represented in Fig. 2a–c.
Effect of pretreatment and drying temperature on moisture ratio kinetics at (a) 50 °C, (b) 60 °C and (c) 70 °C.
Agricultural products are considered porous in nature34, and therefore, when subjected to hot air drying, the heat energy travels through the pores and make the product’s moisture (including surface, hydrate and cell bound waters) content to migrate outwards to the surface from the core and eventually evaporate into the environment. Usually, hot air is dehumidified, energized and is in a state of thirst or disequilibrium. In a bid to revert to its original state, the disequilibrium air strives to absorb moisture while hovering over the agricultural product in the dryer. Hence, the porous characteristics of agricultural product and the action of disequilibrium air on agricultural product ensure the moisture dehydration of the product. The profile in Fig. 2a–c conforms to other reported profiles on the drying of agricultural fruits, vegetables, and crops35. The profile showed that MBF drying occurred in three stages at all the tested pretreatment types and drying temperatures. These are the initial fast drying stage (initial linear-like portion of the profile), low drying stage (middle non-linear concave portion of the profile) and lowest drying stage (last linear-like portion of the curve). Generally, these stages are dependent on the moisture content availability and nature of the internal cell structure of the product undergoing drying, however, case hardening also make its contribution especially within the low and lowest drying stages34. It is also observed that the drying profile in Fig. 2a–c does not exhibit any constant rate drying period (step profile), instead, the drying took place entirely in the falling drying period (steep profile). This implies that the mechanism of moisture migration in MBF was predominantly diffusion controlled. This observation conforms to the report of Elmas et al.36.
Furthermore, Fig. 2a–c showed that untreated MBF sample exhibited the longest drying time followed by 10 min, 5 min and 3 min warm water blanched MBF samples at all selected drying temperatures. The associated long drying time in untreated MBF showed that quick moisture content removal was difficult when compared to the pretreated ones. This may probably be due to its firm natural cell structure (which meant a tight fruit’s moisture to tissue). By implication, the applied pretreatment may have disrupted the firm natural cell structure of MBF and reduced the surface wax too, leading to the crashing down of the drying time significantly. A similar report on the capability of blanching to reduce the drying time was made by Tunde-Akintunde30. In addition, Fig. 2a–c also showed that the drying time variation in the pretreated MBF samples followed a definite trend where an increase in pretreatment time led to an increase in drying time in all drying temperatures. This observation may be attributed to the differences in the initial moisture content of the pretreated samples, which increased as the sample’s resident time in the blanching medium increased. The observation can also be explained by a possible increase in the collapse of the cell pore structures while the pretreatment time increased from 3 to 10 min.
In addition, the effect of drying temperature on the drying time is observable in Fig. 2a–c. The increment in drying temperature showed a direct proportionality to reduction in drying time. This can be explained by the fact that increased temperature can quicken the relative humidity reduction of drying air. Therefore, as the drying temperatures increased, the inward heat transfer, outward moisture migration, and surface moisture evaporation of MBF are highly enhanced leading to decreased drying time. Cheng et al.37, made the same observation during the drying of cherry tomato; likewise, Abano38 made the same observation during the drying of Orange-Fleshed Sweet Potato Slices (Ipomoea batatas).
The effective moisture diffusivity of the untreated and treated samples of MBF at different drying temperatures were estimated through the graphical method and in connection with Eq. (6) is shown in Fig. 3a–c. Effective moisture diffusivity is an indication of the ease of moisture migration from the sample’s core to its surface.
Estimation of the effective moisture diffusivity (a) 50 °C, (b) 60 °C and (c) 70 °C.
The calculated effective moisture diffusivity for each MBF samples is shown in Table 1. The table showed that the effective diffusivity ranged from 5.1052 E−09–1.0088 E−08. This conforms to the generally reported range (10–12–10–8 m2/s) of moisture diffusivity in fruit, vegetables, and crops39. It can be concluded that the effective moisture diffusivities determined and reported in Table 1 are reliable judging from the high coefficient of determination (R2) values of the equation of fit that ranged from 0.9553 to 0.9895.
Furthermore, Table 1 showed that unblanched MBF sample dried at 50 °C had the lowest effective moisture diffusivity while the 3 min blanched MBF sample dried at 70 °C had the highest effective moisture diffusivity. The trend of the effective moisture diffusivity showed that it increased with decrease in pretreatment time and increase in drying temperature. These results conform to the observations made in the section concerned with the “Effect of warm water blanching pretreatment and drying temperature on the moisture ratio of MBF”, where increased drying temperature reduced drying time and increased pretreatment time increased the drying time. Therefore, the same mechanism should govern the observations in the two sections.
The activation energy is a representation of the energy utilized to initiate diffusion of moisture in a product and it shows the relationship between effective moisture diffusivity and temperature27,40. In this study, the graphical method used for the establishment of activation energies of the samples are depicted in Fig. 4a–d. In line with other reports41, the graphical plots were all straight lines and therefore indicates an Arrhenius relationships (effective moisture diffusivity increased with increased temperature). The equation of fit used for the calculation of the activation energies and their respective accuracies (R2) were depicted on the Fig. 4a–d. The high R2 values showed that the equations are dependable.
Estimation of the activation energy of (a) unblanched, (b) 10 min blanched, (c) 5 min blanched and (d) 3 min blanched.
Going forward, the calculated activation energy for each sample in this study is represented in Table 2. The obtained activation energy values were within the generally reported range of 12.7–110 kJ/mol for foods, fruits and vegetables30. The Table 2 showed that unblanched samples had the least activation energy when compared to the blanched samples despite the unblanched sample’s reported least effective moisture diffusivity in the previous section. This observation may be explained with the fact that, though dissociation of the cell bound moisture within the core of unblanched MBF was easily activated, the naturally strong waxy outer coating of unblanched MBF delayed the crossing of the dissociated moisture from within the cell structure to the surface layer. This also explains the comparably longest drying time exhibited by unblanched MBF sample in the previous section. A close observation where unblanched sample had least activation energy compared to blanched sample was also reported by Cheng et al.37 in a study concerning the influence of blanching on the drying characteristics of Cherry Tomato. Table 2 also showed that 5 min blanched sample had the highest activation energy and 3 min blanched sample had the lowest activation energy within the blanched MBF samples. The difference between the activation energies of blanched MBF samples is marginal.
The energy intensive nature of the convective drying technology necessitates the understanding of its total and specific energy requirement of specific products dried. This understanding enables convective drying process to be conducted economically for optimal gains. The Fig. 5a,b showed the total and specific energy consumed during the drying of unblanched and differently blanched MBF samples in this study.
Energy consumption of the drying process.
As represented in Fig. 5a, the highest total energy consumption was observed in unblanched samples dried at 50 °C while the lowest energy consumption was observed in 3 min blanched samples dried at 70 °C. The figure also showed that total energy consumption decreased with decreased temperature and decreased pre-treatment time. Likewise, the specific energy consumption in represented in Fig. 5b takes the same trend as observed in Fig. 5a. The observed total and specific energy consumption seems proportional where samples with higher drying time had higher energy consumption. This observation had been attributed to the cell structure condition and strong waxy surface tissue of MBF that was affected by the applied pretreatment type and the dryer operational temperature that energize the water vapor in MBF during drying. Adeyi et al.41 also reported a close result during the drying of Cobra 26 F1 tomato slab in a convective dryer.
The descriptive statistics of the experimental data used for predictive model development in this study is represented in Table 3. The descriptive statistics enables familiarity and understanding of the data of interest.
Amongst other data description given in Table 3, the skewness represents the measure of data inequality around its mean value. The skewness can be positive, negative, or undefined; and in a normal distribution, the tail on either side of the skewness curve is the exact mirror image of one another. Also, the Kurtosis measures the profusion or lack of outliers in relation to a normal data distribution. The kurtosis is regarded as heavily tailed or light tailed depending on the quantity of outliers in a data. It should be noted that the Kurtosis is distinct from standard deviation, which quantifies the amount by which data differs from the arithmetic mean. The types of kurtosis include meso, lepto and platykurtic. The other data descriptors including mean, median, mode, standard error, samples variance, standard deviation and others are literal.
The skewnesses in all the data factors (drying time, drying temperature, pretreatment and moisture ratio) are low and positive meaning that the data are normally distributed and has symmetry about its mean in a frequency distribution. Furthermore, the Kurtosis values in the factors are also low. This shows that a larger portion of the data fits to a specific distribution while very few portion deviates. Therefore, the data is uniformly organized.
Having had being familiar with the data, ANFIS was trained to develop a network model structure for the process. Such networked model structure is required for process analysis, understanding, redesigning, decision-making, and control. Compared to empirical models, artificial intelligent models are easily adapted for controller design and can deal with multidimensional factors or systems. To determine the best ANFIS network predictive model structure for the drying data in this study, the effect of membership function type and membership function number on the accuracy of the structure was investigated. The result of the investigation is represented in Table 4.
The table showed that the ANFIS structure developed with three (3) numbers of trimf membership function type was the least efficient (in terms of R2 value) while the ANFIS structure developed with five (5) numbers of gbell membership function was the most efficient amongst the 12 combinations of the membership function type—membership function numbers tried. The most efficient ANFIS structure also had the least epoch number. Few epoch numbers are good for limiting the computer memory exhaustion during ANFIS predictive modeling. It should also be noted that increased membership function number increased the complexity of the ANFIS structure thereby elongating the simulation time. This according to Table 4, does not necessarily translate into high performance. Therefore, a too complex or too simple ANFIS network structure should be avoided.
In accordance, Fig. 6a–e represents the content of the most efficient ANFIS structure (three (3) numbers of gbellmf) developed and used for predictive modeling of the drying data in this study. Figure 6a–c showed the training part of the ANFIS structure while Fig. 6d,e showed the prediction part of the ANFIS structure. Figure 6a showed the training and checking error profile during the model development and informed that the training error decreased progressively throughout the training process. However, the checking error initial increased from zero epoch until 20 epochs before it decreased until 38 epochs as demarcated with the small circle after which the checking error increased again. This observation means that the ideal training epoch for this structure is 38, above which there exist a serious data over-fitting32. Data over-fitting implies data memorization rather than the required data feature understanding42.
ANFIS performance plot.
During the course of ANFIS network structure development (i.e. training), the original form of the membership function undergoes refinement to sharpen its data approximation capability. The original form of the gbellmf used for predictive modeling in this study is represented in Fig. 6b while the refined form of the same gbellmf is represented in Fig. 6c. Comparing Fig. 6b,c, it is observed that the first and the third membership functions undergone significant refinement evident by change of shape while only the second membership function did not undergo refinement significant.
The simulation accuracy and modeling efficiency (parity plot) of the refined ANFIS structure that was used for the drying data approximation are shown in Fig. 6d,e. Figure 6d showed the one to one mapping of the ANFIS prediction of the drying data, and showed that significant portion of the experimental data were accurately mapped by the refined ANFIS structure. The parity plot in Fig. 6e showed that refined ANFIS structure has a high coefficient of determination (R2) that is close to unity while it has a root mean square error (RMSE) value of 0.0274 that is close to zero. Generally, a model having R2 value that is close to unity and RMSE value that is also close to zero is considered accurate43. Bousselma et al.26 derived R2 of 0.9995 in modeling the drying kinetics of pre-treated apricot with ANFIS. This result is important for process control during production.
The individual and interactive contribution (as measured by prediction error) of drying process factors (drying time, drying temperature and pretreatment factor) to moisture ratio of MBF are represented in Fig. 7a,b.
Sensitivity analysis of the drying factors at (a) individual contribution and (b) interactive contribution.
The Fig. 7a showed that drying time contributed the least prediction error (0.1785) to the moisture ratio of MBF during drying. This was followed by drying temperature (0.3287) and pretreatment (0.3288). This means that moisture ratio of MBF during drying is most sensitive to drying time followed by drying temperature and pretreatment factor. This observation is logical because if given a sufficient drying time, a product undergoing moisture removal at any given drying temperature with or without pretreatment will get to its equilibrium moisture content. The idea of varied drying temperature and pretreatment type is to shorten the drying time. Figure 7a showed that the difference in the sensitivity of moisture ratio to drying temperature factor compared to pretreatment factor is however marginal.
Considering the sensitivity of moisture ratio of MBF to the interactive or combined drying factors, Fig. 7b showed that the drying time cum pretreatment factor interaction contributed prediction error of 0.1485 while drying time cum drying temperature factor interaction contributed 0.1553. In addition, drying temperature cum pretreatment interactively contributed 0.3275. This means that on factor interaction basis, moisture ratio of MBF is most sensitive to drying time cum pretreatment factor, followed by drying time cum drying temperature factor and lastly followed by drying temperature cum pretreatment factor. This result is important for decision-making and operational control during production.
The effect of thermal pretreatment and drying temperature on the drying characteristics of MBF were investigated and modeled with ANFIS. The sensitivity of moisture ratio during drying to individual and interactive drying process factors were also investigated using ANFIS. These were aimed for drying equipment design and commercialization of MBF dried products. It was concluded from the results that MBF drying occurred in falling rate period only. The thermal pretreatment and drying temperature assisted in reducing the drying time significantly. The range of effective moisture diffusivities fall within the range reported in the literature and the best effective moisture diffusivity was observed in MBF sample that was blanched for 3 min. The activation energies also fall within the ones reported for agro-product in the literature. The unblanched MBF sample had the least activation energy and 5 min hot water blanched sample had the highest activation energy. Thermal pretreatments significantly reduced the total and specific energy consumption. ANFIS structure of 3—gbell membership function—38 epochs showed efficiency in modeling the multidimensional MBF drying data with high coefficient of determination value and can be useful in process controller design. Sensitivity analysis showed that moisture ratio was most sensitive to drying time on individual factor contribution level, and to drying time cum pretreatment factors on interactive factors contribution level. Therefore, drying time should be given the highest consideration when deciding on the moisture ratio of dried MBF product.
All data used in this study are included in the report.
Awotedu, O. L. & Ogunbamowo, P. O. Nutritional, anti-nutritional and phytochemical profile of the leaves and fruits of Synsepalum dulcificum (Schumach. & Thonn.) Daniell. Am. J. Biol. Chem. 7(3), 53–59 (2019).
Google Scholar 
Obafemi, T., Akinmoladun, A., Olaleye, M., Agboade, S. O. & Onasanya, A. A. Antidiabetic potential of methanolic and flavonoid rich leaf extracts of Synsepalum dulcificum in type 2 diabetic rats. J. Ayurveda Integr. Med. 8(4), 238–246 (2017).
CAS  Article  Google Scholar 
Rodrigues, J. F., Andrade, R. S., Bastos, S. C., Coelho, S. B. & Pinheiro, A. C. M. Miracle fruit: An alternative sugar substitute in sour beverages. Appetite 107, 645–653 (2016).
Article  Google Scholar 
Akinmoladun, A. C., Adetuyi, A. R., Komolafe, K. & Oguntibeju, O. O. Nutritional benefits, phytochemical constituents, ethnomedicinal uses and biological properties of Miracle fruit plant (Synsepalum dulcificum Shumach. and Thonn. Daniell). Heliyon 6, e05837 (2020).
Article  Google Scholar 
Jerimiah, O. J., Ilesanmi, O. R. & Ige, M. M. Proximate and mineral composition of Synsepalum dulcificum seed. Sci. Res. J. 3, 2201–2797 (2015).
Google Scholar 
Rahmawati, R. et al. Optimization of temperature and drying time of indigenous cocktail yeast mold culture using response surface methodology (RSM). Food Res. 4(2), 389–395 (2020).
Article  Google Scholar 
Akpinar, E. K. Energy and exergy analyses of drying of eggplant slices in a cyclone type dryer. J. Mech. Sci. Technol. 19(2), 692–703 (2005).
Article  Google Scholar 
Mbegbu, N. N., Nwajinka, C. O. & Amaefule, D. O. Thin layer drying models and characteristics of scent leaves (Ocimum gratissimum) and lemon basil leaves (Ocimum africanum). Heliyon 7, e05945 (2021).
CAS  Article  Google Scholar 
Kaveh, M., Abbaspour-Gilandeh, Y., Fatemi, H. & Chen, G. Impact of different drying methods on the drying time, energy, and quality of green peas. J. Food Process. Preserv. 45, e15503 (2021).
CAS  Article  Google Scholar 
Rojas, M. L., Augusto, P. E. D. & Carcel, J. A. Ethanol pretreatment to ultrasound assisted convective drying of apple. Innov. Food Sci. Emerg. Technol. 61, 102328 (2020).
CAS  Article  Google Scholar 
Brar, H. S., Kaur, P., Subramanian, J., Nair, G. R. & Signgh, A. H. Effect of chemical pretreatments on drying kinetics and physic chemical characteristics of yellow European plums. Int. J. Fruit Sci. 20, 252–279 (2020).
Article  Google Scholar 
Tunde-Akintunde, T. Y., Akintunde, B. O. & Fagbeja, A. Effect of blanching methods on drying kinetics of bell pepper. Afr. J. Food Agric. Nutr. Environ. 11(7), 5457–5474 (2011).
Google Scholar 
Deng, L.-Z. et al. Chemical and physical pre-treatments of fruits and vegetables: Effects on drying characteristics and quality attributes—A comprehensive review. Crit. Rev. Food Sci. Nutr. https://doi.org/10.1080/10408398.2017.1409192 (2017).
Article  PubMed  Google Scholar 
Kapadiya, D. C., Makavana, J. M. & Kathiria, M. K. Effect of hot water blanching treatment on the quality of dried potato slices. Int. J. Curr. Microbiol. Appl. Sci. 7(7), 2754–2764. https://doi.org/10.20546/ijcmas.2018.707.322 (2018).
CAS  Article  Google Scholar 
Xiao, H.-W. et al. Recent developments and trends in thermal blanching—A comprehensive review. Inf. Process. Agric. 4, 101–127. https://doi.org/10.1016/j.inpa.2017.02.001 (2017).
Article  Google Scholar 
Jeet, P., Immanuel, G. & Prakash O. Effects of blanching on the dehydration characteristics of unripe banana slices dried at different temperature. AgricEngInt CIGR J. 17(2). http://www.cigrjournal.org (2015).
Demiray, E., Seker, A. & Tulek, Y. Drying kinetics of onion (Allium cepa L.) slices with convective and microwave drying. Heat Mass Transf. 53, 1817–1827 (2017).
ADS  CAS  Article  Google Scholar 
Abbaspour-Gilandeh, Y., Jahanbakhshi, A. & Kaveh, M. Prediction kinetic, energy, and exergy of quince under hot air dryer using ANNs and ANFIS. Food Sci. Nutr. 8, 594–611 (2019).
Article  Google Scholar 
Yazdani, M., Borghaee, A. & Beheshti, B. Mathematical and neural networks modelling of thin-layer drying of peach (Prunus persica) slices and their comparison. Eur. J. Exp. Biol. 3, 712–721 (2013).
Google Scholar 
Sakar, T., Molla, S., Sudipta, K. H. & Runu, C. Artificial neural network modelling approach of drying kinetics evolution for hot air oven, microwave, microwave convective and freeze dried pineapple. SN Appl. Sci. 2, 1–8 (2020).
Google Scholar 
Adeyi, A. J., Adeyi, O., Oke, E. O., Okwokwo, E. & Ogunsola, A. D. Effective moisture diffusivity of Sierrathrissa leonensis cracker: Optimization, sensitivity and uncertainty analyses. Sci. Afr. J. 12, e00807 (2021).
Google Scholar 
Saltelli, A. Sensitivity analysis for importance assessment. Risk Anal. 22(3), 579–290 (2002).
Article  Google Scholar 
Taiwo, K. A. & Adeyemi, O. Influence of blanching on the drying and rehydration of banana slices. Afr. J. Food Sci. 3(10), 307–315 (2009).
CAS  Google Scholar 
AOAC. Official Methods of Analysis 13th edn. (AOAC, 1990).
Google Scholar 
Fadeyibi, A., Lamidid, W.A. and Ademola, S.M. Engineering and proximate properties of miracle berry fruit (Synsepalum dulcificum L.). Agric. Eng. Int. CIGR J. 23(4) (2021)
Bousselma, A., Abdessemed, D., Tahraoui, H. & Amrane, A. Artificial intelligence and mathematical modelling of the drying kinetics of pre-treated whole apricots. Kem. Ind. 70, 651–667 (2021).
CAS  Google Scholar 
Ojediran, J. O. et al. Hot air convective drying of hog plum fruit (Spodias mombin): Effect of physical and edible-oil aided chemical pretreatment on drying and quality characteristics. Heliyon 7, e08312 (2021).
Article  Google Scholar 
Motevali, A., Abbaszadeh, A., Minaei, S., Khoshtaghaza, M. H. & Ghobadian, B. Effective moisture diffusivity, activation energy and energy consumption in thin-layer drying of jujube (Zizyphus jujube Mill). J. Agric. Sci. Technol. 14, 523–532 (2012).
Google Scholar 
Sarvestani, E. S., Rahimi, A. & Hatamipour, M. S. An experimental study on drying characteristics and kinetics of figs (Ficus carica). Pol. J. Chem. Technol. 16(4), 60–65 (2014).
CAS  Article  Google Scholar 
Tunde-Akintunde, T. Y. Effect of pretreatments on drying characteristics and energy requirements of plantain (Musa AAB): Plantain drying: drying characteristics and energy requirements. J. Food Process. Preserv. 38, 1849–1859 (2014).
Article  Google Scholar 
İsmail, O., Beyribey, B. and Doymaz, I. Effect of drying methods on drying characteristic, energy consumption and color of nectarine. Journal of Thermal Engineering. 2 (2), (2016).
Okonkwo, C. E. et al. Neural network and adaptive neuro fuzzy inference system modeling of the hot air drying process of orange –fleshed sweet potato. J. Food Process. Preserv. 00, e16312 (2022).
CAS  Google Scholar 
Oke, E. O., Adeyi, O., Adeyi, A. J. & Adekunle, K. O. Modeling of Grewier mollis stem bark gum extraction yield using neuro-fuzzy technique. Int. J. Eng. Res. Afr. 34, 70–80 (2017).
Article  Google Scholar 
Gao, Y., Yang, X., Chu, L., Zhang, Y. & Qinghai, L. Experimental investigation and thin-layer modelling of cassava slice drying. J. Therm. Anal. Calorim. 147, 1379–1387 (2020).
Article  Google Scholar 
Mishraa, M., Kandasamy, P., Shuklaa, R. N. & Kumar, A. Convective hot-air drying of green mango: influence of hot water blanching and chemical pre-treatments on drying kinetics and physicochemical properties of dried product. Int. J. Fruit Sci. 21, 732–757 (2021).
Article  Google Scholar 
Elmas, F., Varhan, E. & Koç, M. Drying characteristics of jujube (Zizyphus jujuba) slices in a hot air dryer and physicochemical properties of jujube powder. J. Food Meas. Charact. 13, 70–86 (2019).
Article  Google Scholar 
Cheng, L., Fang, S. & Ruan, M. Influence of blanching pre-treatment on the drying characteristics of cherry tomato and mathematical modelling. Int. J. Food Eng. 11, 265–274 (2015).
CAS  Article  Google Scholar 
Abano, E. Microwave and blanching pretreatments for hot air drying of orange-fleshed sweet potato slices (Ipomoea batatas). Int. J. Food Sci. (2020).
Kipcak, A. S. & Doymaz, I. Mathematical modelling and drying characteristics investigation of black mulberry dried by microwave method. Int. J. Fruit Sci. 20, 1222–1233 (2020).
Article  Google Scholar 
Srikanth, K. S. et al. Convective drying and quality attributes of elephant foot yam (Amorphophallus paeoniifolius). LWT Food Sci. Technol. 99, 8–16 (2019).
CAS  Article  Google Scholar 
Adeyi, O. et al. Drying characteristics of thermally pre-treated COBRA 26 F1 tomato slabs and applicability of Gaussian Process Regression-based models for the prediction of experimental kinetic data. Korean J. Chem. Eng. 39(2), 1135–1145 (2021).
Google Scholar 
Adeyi, A. J. et al. Effect of varied alkali treatment of Ampelocissus cavicaulis fiber on the tensile property of reinforced polyester composite: prediction, optimization, uncertainty and sensitivity analysis. Adv. Ind. Eng. Polym. Res. 4, 29–40 (2020).
Google Scholar 
Inyang, U. E., Oboh, I. O. & Etuk, B. R. Kinetic models for drying techniques—food materials. Adv. Chem. Eng. Sci. 8, 27–48 (2018).
CAS  Article  Google Scholar 
Download references
Department of Chemical Engineering, Michael Okpara University of Agriculture, P.M.B 7267, Umudike, Abia State, Nigeria
Oladayo Adeyi, Emmanuel Olusola Oke & John Adebayo Otolorin
Department of Mechanical Engineering, Ladoke Akintola University of Technology, P.M.B 4000, Ogbomoso, Oyo State, Nigeria
Abiola John Adeyi
Department of Mechanical Engineering, Obafemi Awolowo University Ile Ife, Ife, Nigeria
Oluwaseun Kayode Ajayi
Department of Mechanical Engineering, Osun State University, Osogbo, Nigeria
Seun Oyelami
Forestry Research Institute of Nigeria, Ibadan, Nigeria
Sylvester E. Areghan & Bose Folashade Isola
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
Conceptualization: O.A. and A.J.A.; Data curation: A.J.A., O.A. and E.O.O.; Investigation: O.K.A., J.A.O. and S.O.; Methodology: A.J.A. and O.A.; Software: A.J.A., O.A. and E.O.O.; Writing—original draft: A.J.A., O.A., E.O.O., S.E.A. and B.F.I.
Correspondence to Abiola John Adeyi.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Adeyi, O., Adeyi, A.J., Oke, E.O. et al. Adaptive neuro fuzzy inference system modeling of Synsepalum dulcificum L. drying characteristics and sensitivity analysis of the drying factors. Sci Rep 12, 13261 (2022). https://doi.org/10.1038/s41598-022-17705-y
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-17705-y
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Advanced search
Scientific Reports (Sci Rep) ISSN 2045-2322 (online)
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

source

Mixing on Headphones for Stereo & Immersive Audio: OLLO Chat Podcast

TAVERNIER PILATES STUDIO CELEBRATING 20 YEARS – Florida Keys Weekly Newspapers – Florida Keys Weekly

On a recent Wednesday morning at 8:30 a.m. — while many of us were still blinking awake over our coffee mugs — the Pilates in Paradise studio in Tavernier was humming with activity.
In the back of the room, owner Christi Allen Franchini led two apprentice teachers through a floor mat exercise; on the right side, next to the mirrors, staffer Chris Hoguet watched as a client stretched on Pilates equipment.
“Flex, point, roll down, over, flex, point, again,” said Franchini kindly, yet firmly. She stood erect with perfect posture, her eyes bright and alert, hair springing outward in curls.
“Keep that back line, that’s right,” she continued. “Don’t drop the legs, Deb.”
Franchini took a quick break to chat with an observer. “Like I was saying, pilates is my superpower. But I have an injury, so I am getting physical therapy. All of us here at the studio have injuries and issues. … And what is really good to know is: PT is not forever. Pilates is forever,” she said. 
Suddenly, she turned her attention back to her apprentices. “Make sure you put the pelvis down before spinning your legs,” she called out.
Franchini’s passion for Pilates has been a through line in her life, giving her the focus and resilience to create a successful business with two studios, a teacher certification program, philanthropic efforts and plenty of happy students. Toss a rock in the Upper Keys, and you’ll probably hit someone who either knows Franchini or has gone to Pilates in Paradise, which celebrates its 20th anniversary this year. Bear in mind: That means Franchini’s business prospered despite the 2009 recession, Hurricane Irma and the pandemic.
“Christi is very persistent and persuasive,” said Carolyn Cochrane, a longtime student. “When she first started she was in (a small office in Key Largo). Whenever she would relocate, she’s always been trying to improve her facility, and she’s done a great job.”
And she certainly seems to have it all. She’s happily married to boat captain Victor Franchini and mom to two children. But as with any superhero origin story, Allen has hit her share of challenges. She had a less-than-sterling college career in Washington State, then she opened — and closed — a clothing boutique in Tallahassee. Twenty years ago, she found her way to the Florida Keys as a personal trainer, but she had a setback when she tore the ACL in her knee. After two surgeries, she could no longer run. But while her body healed, she practiced Pilates.
“I thought I was going to be a wreck,” she said. “But because of Pilates, I was able to run after taking two years off. … The doctors were amazed.”
She was hooked, and a business was born. She wanted to give students the vitality that Pilates had given her. She took a teacher certification program in New York under Joe Pilates’ protégé Romana Kryzanowska.
“I love this part of Pilates,” she said. “It feeds my soul — helping everyday people that deal with physical limitations that don’t allow them to say yes to life. … Pilates opens the door to being able to say yes to things you want to do.”
A few years back, Hoguet found himself at a crossroads. As a disabled veteran, he wanted to give back to other vets while also finding a vocation that was healing. He discovered Pilates in Paradise’s special program for veterans, who can take classes at a discounted rate. The project was created by former staffer Kerri Bender (who has since moved). Bender and Franchini encouraged Hoguet to be a teacher himself, and he jumped at the opportunity.
“Pilates in Paradise has had a big effect on my life,” he said. “My pain level has dramatically decreased, and it has given me the opportunity to help others.”
Franchini has created a family of happy students, and they are not all the lithe, skinny, finely sculpted models that popular culture may have us believe. They are everyone from high school football players to mothers who have just given birth. One longtime student, Pat Miller, is 87 and has had knee, shoulder and hip replacements.
As for the future, Franchini is planning a Pilates-themed boat cruise and continuing her teacher certification program so she can spread her message up and down the Keys.
“Yesterday, I worked with a client who, when she first came to me, walked in bent over and crooked with nerve pain down her leg. Some years later, she showed me pictures of her dancing and dropping it like it’s hot. … Pilates is an exercise method that heals your body. When you do it with proper alignment and proper mechanics, it will change your life.”
More information about Pilates in Paradise studios in Ocean Reef and Tavernier is available at [email protected], 305-453-0801 or @PilatesInParadise on Facebook.

MARATHON WEEKLY
305.743.0844
9709 OVERSEAS HWY
OLDE TOWNE CENTRE
MARATHON, FL 33050
UPPER KEYS WEEKLY
305.363.2957
91760 OVERSEAS HIGHWAY
TAVERNIER FL 33070
KEY WEST WEEKLY
305.453.6928
305.509.7347
5450 MACDONALD AVENUE, NO. 5
KEY WEST, FL 33040

You must be to post a comment.

source

U.S. to Send Ukraine More Weapons in Latest Round of Aid – The New York Times

U.S. to Send Ukraine More Weapons in Latest Round of Aid  The New York Times
source

‹ Previous Next ›