Ezra Miller charged with felony burglary days after Warner Bros. Discovery CEO Zaslav praises ‘Flash’ movie CNBC
source
Competing effects of vegetation density on sedimentation in deltaic marshes – Nature.com
Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Nature Communications volume 13, Article number: 4641 (2022)
4
Metrics details
Marsh vegetation, a definitive component of delta ecosystems, has a strong effect on sediment retention and land-building, controlling both how much sediment can be delivered to and how much is retained by the marsh. An understanding of how vegetation influences these processes would improve the restoration and management of marshes. We use a random displacement model to simulate sediment transport, deposition, and resuspension within a marsh. As vegetation density increases, velocity declines, which reduces sediment supply to the marsh, but also reduces resuspension, which enhances sediment retention within the marsh. The competing trends of supply and retention produce a nonlinear relationship between sedimentation and vegetation density, such that an intermediate density yields the maximum sedimentation. Two patterns of sedimentation spatial distribution emerge in the simulation, and the exponential distribution only occurs when resuspension is absent. With resuspension, sediment is delivered farther into the marsh and in a uniform distribution. The model was validated with field observations of sedimentation response to seasonal variation in vegetation density observed in a marsh within the Mississippi River Delta.
Natural and anthropogenic forces, such as sea-level rise1,2, coastal development3, reduction of riverine sediment4,5, and subsidence and compaction of coastal sediments6,7, have caused extensive land loss, degradation, and fragmentation of coastal ecosystems, threatening the delivery of important ecosystem services8. For example, the average relative sea-level rise in the Mississippi River Delta (MRD) is 13 mm/yr9. Over the past century, rapid wetland loss has occurred in coastal Louisiana, with a total area of ≈5000 km2 lost between 1932 and 201610. A major restoration scheme is planned, including two sediment diversions, which will enhance sediment delivery and simulate the natural delta-building processes4,11. However, it is still unclear how much sediment can be delivered to and retained by the coastal wetlands2,12.
Wetland vegetation has a strong influence on sediment transport in river deltas13,14. It is widely believed that vegetation enhances sedimentation in both fresh- and saltwater marshes as vegetation increases hydraulic roughness, which reduces flow velocity15, enhancing sediment retention, stabilizing deposited sediment, and minimizing erosion16,17 However, some field observations and numerical models have shown that vegetation does not always enhance sedimentation on deltaic marshes13,18. Because flow is diverted away from regions of very dense vegetation, the sediment supply to those regions declines, reducing the potential deposition19,20. Nardin and Edmonds13 first described these competing influences of vegetation, enhanced retention, and reduced supply, showing that both can impact the net accumulation of sediment on a marsh platform. At present, there are few studies that consider both processes or quantify their competing effects on sedimentation and its spatial distribution. In addition, most model studies, e.g., refs. 13, 21, simplify the vegetation effects through a Manning’s roughness, which does not account for the additional turbulence generated by vegetation, which can also impact sediment transport22,23,24.
Understanding the influence of vegetation on the competing mechanisms of sediment supply and retention is critical for planning successful restoration strategies that will recover lost land. For example, a more efficient application of sediment diversion could be achieved by timing sediment input to periods of vegetation density that optimize sediment accretion, which was the focus of this study. Specifically, this study considered the impact of vegetation density on the sediment supply to and retention on a marsh platform using a random displacement model (RDM), a Lagrangian method that tracks the transport of sediment particles subject to advection, diffusion, deposition, and entrainment. The RDM method was chosen for its computational efficiency. Unlike most numerical models, which represent vegetation through a Manning’s roughness13,20,21, our model considered the effects of vegetation size and area density on velocity, turbulence, and diffusivity, each of which influences sediment deposition and resuspension. Rather than considering a specific site, this study intentionally considered a reduced-order (2D) representation of a marsh platform in order to explore a wide parameter space. The RDM method enabled us to separately quantify the effects of supply and retention and their impacts on sedimentation and its spatial distribution. A previous study validated the RDM model using laboratory measurements of suspended sediment concentration22. The present study offers further validation through a comparison to field measurements.
The model scenario is based on a deltaic marsh and focuses on the exchange between a channel and a marsh platform with emergent vegetation (Fig. 1a). The flow entering the marsh is steady, perpendicular to the marsh edge, and driven by a water surface slope between the channel and marsh. Sediment is continuously introduced to the marsh at the channel boundary. Based on typical conditions in marshes18,19,20,21, 16 base cases considered vegetation area density n = 0 to 500 stems/m2, with stem diameter d = 1.0 cm, water depth H = 0.3 m, and water surface slope S = 0.0005. To consider seasonal effects on vegetation growth and water flux14, additional slopes (S = 0.00025 and 0.001) and stem diameters (d = 0.5 and 1.5 cm) were considered, for a total of 80 cases. Finally, the model was compared to a field study within the MRD, reported in ref. 19, which measured flow, sediment, and vegetation parameters in different seasons (April 24, June 3, and July 1, see also Fig. 1b, c).
a Schematic of modeled scenario with typical scales. b Photo of a field site in Cubits Gap sub-delta, MRD, taken in June 2019, corresponding to the highest vegetation coverage, Vc = 66%. c Same as b, but in July 2019 with Vc = 20%. Change in vegetation coverage was due to natural variation over the growing season. The dominant vegetation was Potamogeton nodosus.
The impacts of vegetation on flow and sediment fate can be quantified by three parameters. First, vegetation increases flow resistance, which decreases velocity on the marsh, which in turn reduces sediment supply relative to the bare bed reference state. The restriction of supply is quantified by the sediment supply ratio (SSR),
Min,n is the sediment mass flux entering the marsh carried by fluid velocity Un, associated with vegetation density n denoted with subscript “n”, and n = 0 for a bare bed (without vegetation). Cc is the suspended sediment concentration in the channel.
Second, sediment retention is quantified by the ratio of net deposition to sediment supply, called the retention efficiency (RE), with Mnd,n the total net deposition on the marsh with vegetation density n.
Third, to compare between cases, the total net deposition, Mnd,n, was normalized by the mass supplied to the bare marsh platform (i.e., maximum supply, Min,0), and this ratio is called the relative net deposition (ND)
Vegetation density impacts time-mean and turbulent velocity, which influences sediment supply and resuspension. Specifically, velocity, shear stress, turbulent kinetic energy (TKE), and diffusivity all decrease with increasing vegetation density (Fig. 2). For a fixed slope S and stem diameter d, increasing stem density n, which increases flow resistance, reduces velocity25,26. A reduction in velocity is associated with a reduction in sediment supply. Because flow resistance is proportional to the frontal area, for the same stem density, a larger (smaller) stem diameter produces a smaller (larger) velocity (Fig. 2a). Increasing slope increases the velocity (Fig. 2a, inset graph), but does not influence the velocity ratio (Eq. 1), so that supply restriction is not a function of surface slope (Eq. (M4) in Methods). Because bed shear stress is proportional to velocity squared (τ ~ U2, Eq. (M9)), it declines more rapidly than velocity with increasing stem density (Fig. 2b). The significant decrease in τn with increasing n reduces the tendency for sediment resuspension, which enhances retention.
Each parameter is normalized by its value without vegetation (bare bed), denoted by subscript “0”. a Normalized velocity (Un/U0) decreases with increasing stem density n. Blue to red color represents increasing diameter or slope. The normalized velocity is not a function of slope (Eq. (M4)), so all cases with the same stem diameter but different slopes collapse to a single curve, shown by the gray curve. The inset graph shows the dimensional velocity Un for different slopes with d = 1.0 cm. b Same as a, but for normalized bed shear stress (τn/τ0, solid lines) and critical shear stress (τc,n/τc,0, dashed lines). The inset graph shows the variation in shear stress for different slopes with d = 1.0 cm. The critical shear stress is not a function of the slope. c Same as a, but for normalized turbulent kinetic energy (kt,n/kt,0). d Same as a, but for normalized diffusivity (Dz,n/Dz,0). The dash-dot line indicates the Peclet number (Pe), the right-hand axis.
Previous studies have shown that for the same velocity, turbulent kinetic energy, kt, is higher in vegetated flow than in non-vegetated flow due to vegetation-generated turbulence27 (Methods, Eq. (M5)). However, since velocity decreases with increasing n, which also impacts TKE, the TKE decreases with increasing stem density (Fig. 2c). For the same n, increasing d (Fig. 2c, blue to red) reduces velocity, which tends to reduce TKE. However, increasing d also increases solid volume fraction, ϕ, which tends to enhance TKE15. These competing effects result in only a small variation in TKE even with a large variation in d.
Turbulent diffusivity (Dz) is proportional to the turbulent velocity scale (sqrt{{k}_{t}}) (Methods), such that diffusivity decreases with increasing stem density (Fig. 2d). Turbulent diffusion tends to carry sediment away from the bed, inhibiting deposition, so that a decrease in diffusivity facilitates sedimentation. The Peclet number Pe = wsH/Dz (right axis in Fig. 2d), which measures the relative importance of settling and diffusivity28, increases as stem density n increases, indicating a shift in sediment transport dominated by diffusion to transport dominated by the settling. This shift impacts the shape of the suspended sediment concentration (SSC) profile. Specifically, as Pe increases with n, the vertical profile of SSC becomes increasingly non-uniform, with a higher concentration near the bed (Supplementary, S2).
Finally, because vegetation-generated turbulence can contribute to resuspension, the critical shear stress for resuspension29,30, τc, is lower with vegetation than for bare bed, and it decreases with increasing stem density (Fig. 2b). Further, for the same stem density, it decreases with increasing stem diameter (Methods, Eqs. (M8) and (M10)). Importantly, bed stress (τn) decreases more rapidly with increasing stem density than critical shear stress τc,n, so the overall effect of increasing vegetation density is to reduce resuspension.
Increasing stem density n reduces velocity (Fig. 2a), which reduces sediment supply to the marsh, illustrated by the supply ratio, SSR (Eq. (1), Fig. 3a). However, a reduction in velocity is also associated with a reduction in shear stress, TKE, and diffusivity, and each of these trends favors deposition, increasing sediment retention efficiency RE (Eq. (2), Fig. 3a). The competing trends of SSR and RE produce a nonlinear relationship between net deposition (ND = SSR × RE) and vegetation density, such that an intermediate density yields the maximum net deposition (Fig. 3b). This is an important result, because one often thinks of vegetation only in terms of enhancing deposition, but the degree of enhancement has a strong dependence on vegetation density through the influence on sediment supply. For example, in the base cases (Fig. 3b), the optimal density (n = 80 m−2) traps 16% of the bare bed supply, whereas the highest density (n = 500 m−2) only traps 7.6% of Min,0, i.e., the densest vegetation does not trap the most sediment. For high vegetation density τn < τc,n (n ≥ 160 m−2 in Fig. 3b), which eliminates resuspension, making retention efficiency RE ≈ 1, so that sediment accretion depends only on supply restriction. In contrast, for small stem density (n < 160 m−2 in Fig. 3b), τn > τc,n, and resuspension is active and increases with decreasing n, offsetting the greater supply (SSR) with decreasing n, so that net deposition (ND) decreases as n approaches 0.
SSR is sediment supply ratio, triangles (Eq.1). RE is retention efficiency, squares (Eq. 2). ND is normalized net deposition, circles (Eq.3). Base cases in a and b, varied stem diameter d in c and d, and varied slope S in e and f. Blue to gray to red color corresponds to increasing diameter or slope. In b vertical dashed line at n = 160 m−2 indicates the condition τn = τc,n. The gray shading around the ND curve denotes the ensemble standard deviation based on ten realizations (Methods), which ranged from 1.1 to 6.0% of the ensemble average. In e note that SSR is not a function of slope (Eqs. (1) and (M4)), so SSR curves with different slopes overlap, shown by the gray line with triangles.
Differences in vegetation type and growth phase can be represented through stem diameter d. Specifically, increasing d indicates a greater frontal area per plant stem, which increases flow resistance and decreases velocity (Fig. 2a), so that sediment supply, SSR, is diminished with increasing d (Fig. 3c). This trend dominates the net deposition over most of the stem density range, such that ND decreases with increasing d (Fig. 3d). However, for small n, and specifically when resuspension is active (τn > τc,n), increasing d decreases bed shear stress by a greater degree than it decreases the critical shear stress (Fig. 2b), such that resuspension decreases with increasing d, which enhances the retention efficiency (RE in Fig. 3c). For this reason, when n is small (n < 40 m−2), net deposition increases with increasing d (Fig. 3d).
Variation in flow forcing due to seasonality, storms, or tides, can be represented by varying S. Consider the smallest value, S = 0.00025, for which the densest vegetation yields the same net deposition as an unvegetated marsh (ND ≈ 5% for both n = 0 and 500 m−2, Fig. 3f). That is, the vegetation provides no enhancement to sediment accretion. This is representative of lower energy environments (S < 0.00025), for which τ0 ≤ τc,0 even for the bare bed, such that the peak in sedimentation shifts to n = 0, and the net deposition in all vegetation cases will be smaller than the unvegetated case. This is because in the absence of resuspension, net deposition is controlled only by supply, which decreases with increasing vegetation density. As S increases from 0.00025 to 0.001, the peak in net sedimentation shifts from n = 20 to n = 200 m−2, and the magnitude decreases (Fig. 3f). These shifts occur because increasing S increases velocity and thus τn, which enhances resuspension and reduces retention efficiency for small n (Fig. 3e, f). Consequently, the peak progressively shifts to a larger n but has a smaller magnitude.
The vegetation density can also affect the spatial distribution of sedimentation31,32. Two deposition patterns emerge in the model, depending on whether resuspension is present. If resuspension is absent (τn < τc,n), deposition progressively decreases with distance into the marsh (x direction), called Pattern 1 (Fig. 4a). Pattern 1 is common in freshwater marshes32,33. Maximum deposition occurs at the marsh edge, where supply is highest. Since no resuspension occurs, deposition near the edge reduces the supply to regions farther into the marsh, and the progressive decrease in supply is reflected in the progressive decrease in sedimentation with distance from the marsh edge. This distribution has been described by an exponential model for sediment deposition31. Because the velocity (Fig. 2) and supply (Fig. 3) decrease with increasing stem density, in Pattern 1, both the total sedimentation (area under curve, dependent on supply) and the distance over which deposition occurs, Lnd (dependent on velocity) decrease with increasing n (Fig. 4a). While total deposition increases with time, the sedimentation distance does not change. Specifically, for Pattern 1, sediment distribution is dominated by settling (large Pe), so that the settling time-scale, H/ws, defines the sedimentation distance, i.e., ({L}_{{nd}}=(2.0pm 0.1)frac{{UH}}{{w}_{s}}) (Supplementary, S3).
a Pattern 1. In cases without resuspension (τn < τc,n e.g., base cases n = 160 and 500 m−2) normalized sedimentation Mnd,1m/Min,0, estimated over ∆x = 1 m increments, decreases with distance from marsh edge over deposition length-scale Lnd, the maximum distance sediment can be carried into the marsh. The curves of Mnd,1m (dashed lines) were smoothed with a moving average. b Pattern 2. In cases with resuspension (τn > τc,n, e.g., base cases n = 40 and 60 m−2) Mnd,1m/Min,n increases with distance from marsh edge until SSC profile reaches equilibrium at Leq, indicated by black arrows.
When resuspension is present (Pattern 2), particles deposited near the edge can later be resuspended and delivered farther into the marsh so that sedimentation can occur farther into the marsh than in Pattern 1 (Fig. 4b). In Pattern 2, sedimentation increases with distance from the marsh edge until distance Leq, reflecting the adjustment in the vertical profile of SSC. At the marsh edge, sediment is introduced uniformly over the depth, which simulates well-mixed sediment coming from the river. As suspended sediment travels into the marsh, the SSC profile evolves to an equilibrium distribution with higher SSC near the bed (Supplementary, Fig. S4). As a result, the near-bed SSC increases between the marsh edge and marsh interior, which results in the increase in sedimentation (Fig. 4b). The distance over which this adjustment occurs, Leq, decreases with increasing stem density (Fig. 4b). Leq is set by the adaptation time-scale for the SSC profile. For small Pe characteristic of Pattern 2, this is the diffusion time-scale, Ta ~ H2/Dz25,31, and Leq ~ UTa. Specifically, ({L}_{{eq}}=(0.16pm 0.02)frac{U{H}^{2}}{{D}_{z}}) (Supplementary, S3).
The simulation of net deposition was validated by comparison to a field study reported in Beltrán-Burgos19, which measured velocity, sediment, and vegetation parameters over a growing season at Cubits Gap, a sub-delta in the MRD (Fig. 1b, c). At this site, the maximum sedimentation occurred during a period of intermediate vegetation density (July). The model inputs, based on the field measurements, are summarized in Table 1 and described in the Methods. The measured (stars) and modeled (circles) sedimentation rates, (widetilde{{q}_{d}}), had a good agreement (Fig. 5), indicating that the RDM captured the competing effects of supply restriction and retention efficiency to predict the observed nonlinear dependence between vegetation density and net deposition.
The gray dashed curve was added to emphasize the nonlinear relationship between net deposition rate and vegetation density. Note that each measurement occurred under a different water slope (Table 1), which was associated with a different modeled curve of (widetilde{{q}_{d}}) versus vegetation density. The individual curves are shown in Supplementary S5.
Using a reduced-order representation of flow between a channel and marsh platform, this study explored a wide parameter space, which provided insight into the role of vegetation density on sediment accretion. First, as vegetation density increases, velocity decreases, which is associated with a reduction in shear stress, TKE, and diffusivity, all of which favor deposition and sediment retention. However, the reduction in velocity also reduces sediment supply. The competing effects of enhanced retention and reduced supply produce a nonlinear relationship, such that an intermediate vegetation density yields the maximum net deposition. Second, the optimum vegetation density depends on the water surface slope (S), with maximum accretion shifting toward lower vegetation density as S decreases. In particular, for sufficiently small S, such that τ0 ≤ τc,0 even for the bare bed, the peak accretion is associated with bare bed (n = 0), and sediment accretion rate decreases with the addition of vegetation. Finally, vegetation density also affects the spatial distribution of sedimentation. If vegetation density is sufficient to eliminate resuspension, the deposition pattern is exponential, with maximum deposition at the marsh edge (Pattern 1). However, if the vegetation density is not sufficient to eliminate resuspension, particles deposited near the edge can be resuspended and delivered farther into the marsh, resulting in lower accretion at the marsh edge and a more uniform spatial pattern of deposition farther into the marsh (Pattern 2).
Topography observed in the field suggests that sedimentation patterns can resemble a hybrid of Patterns 1 and 2 (Fig. 4), with maximum sedimentation occurring 10 s of meters from the edge (as in Pattern 2), but following Pattern 1 farther from the edge34. Elevated turbulence at the channel edge, which was not included in the simulation, can keep particles vertically well-mixed and promote resuspension, both of which diminish net deposition near the edge. The penetration of turbulence from the channel, as well as local shear-layer turbulence and edge-wave generation, could impact the marsh over distance δ ~ (nd)−1 25,35. However, this length-scale is O(1 m), which is small compared to the equilibrium distance, Leq, suggesting Leq is the more important length-scale for edge morphology. In the field, levee elevation increases over a greater length-scale, O(10 m), suggesting a larger transition length for deposition. Seasonal, storm-related, and tidal variation in water depth that submerges the marsh vegetation may extend the deposition length, as higher velocity above the vegetation can carry sediment farther into the marsh, a process not captured in our model, which only considered emergent vegetation.
An important caveat in the simulation is that all deposited particles have the same opportunity to resuspend, dictated by a constant τc. In real systems, this could describe newly deposited sediment or deposition within a specific flow event but would likely overestimate the resuspension of particles deeper in the sediment profile because τc typically increases with sedimentation depth because of consolidation and physico-chemical effects36. Thus, while the spatial pattern may be correctly captured, the simulation underestimates the long-term accumulation of sediment. Moreover, the over-estimation of the resuspension rate may shift the optimal vegetation density upward, suggesting a smaller optimum n in real systems relative to the RDM results.
The 2D simulation (streamwise-depth plane) cannot resolve horizontal heterogeneity in vegetation density (patchiness), which can be present in the field (e.g., Fig. 1c). When vegetation area coverage is above a percolation threshold (>40–50% area coverage), patchiness does not significantly impact marsh-scale flow, and a spatial average model, such as the present simulation, is accurate37,38. Below this threshold, the effect of patchiness depends on stem density. For sparse vegetation (({C}_{d}{ndH} lesssim 0.5), i.e., n < 160 m−2 in our study), patchiness has a negligible impact on flux38. For dense vegetation (Cd ndH ≳ 1.0, i.e., n > 330 m−2 in our study), patchiness enhances channel-marsh connectivity, which increases sediment supply but also increases local velocity and shear stress, which can increase resuspension and decrease retention. Because both supply and resuspension are enhanced, the impact of patchiness on sediment accretion may be small.
By considering the interaction between flow, vegetation, and sediment, this study provides important insight into how vegetation density (related to species and growth phase) influences the potential to trap sediment and build marsh, which are key processes needed to save drowning coasts, such as Louisiana, USA. In particular, the study can provide guidance to optimize the retention of sediment by wetlands targeted by sediment diversions, both at the scale of local levee cuts and by the billion-dollar Mid-Barataria and Mid-Breton structures.
A random displacement model (RDM) is a Lagrangian method that tracks the movement of individual sediment particles, including advection, diffusion, settling, and entrainment (resuspension). It is derived from the Fokker–Planck equation, which describes the conditional probability for the particle’s velocity and position as a function of time39. For a large number of particles and a small time-step, the Fokker–Planck equation is equivalent to the continuum advection-diffusion equation40,41. In this study, a 2D (streamwise, x, and vertical, z, Fig. 1a) RDM was used to simulate the transport of individual sediment particles over a marsh platform. Sediment particles uniformly distributed over depth were continuously introduced to the marsh at the channel boundary. Within each time-step, ∆t, the displacement of each particle (∆x, ∆z) is derived from two components: the time-mean advection and a random turbulent velocity42. Assuming a high streamwise Peclet number, the longitudinal diffusion was neglected43. Specifically, the particle position at time-step i + 1 was described as follows22,44:
in which Kz is the sediment vertical diffusivity. The term ∂Kz/∂z is a pseudo-velocity needed to prevent the artificial accumulation of particles in regions of low diffusivity45. G is a random variable with standard Gaussian distribution (zero mean and unit variance). In this study, particles in the marsh were fine enough to assume that the sediment diffusivity Kz was equal to turbulent diffusivity Dz46. It is worth noting that the 2D model is valid along any vector parallel to the flow direction entering the marsh, as long as the transport onto the marsh platform is dominated by advection. Situations in which the exchange with the marsh is predominantly by lateral diffusion would not be represented by this model. For simplicity, in this study, the flow direction is assumed to be perpendicular to the marsh edge (Fig. 1), and lateral diffusion is not considered.
The time-step, ∆t, was chosen so that the vertical particle trajectory within each time-step was much smaller than the scale of vertical gradients in the diffusivity and velocity47,48. A length-scale equal to 0.05H was suggested for emergent vegetation49. Thus, ∆t was selected as
The velocity, shear stress, TKE, and turbulent diffusivity were dependent on vegetation area density, n. For simplicity, the vegetation was modeled as rigid cylinders with diameter d and height h greater than water depth H, i.e., emergent vegetation. The velocity (U) within the marsh can be derived from the conservation of momentum20,50,
in which g is the acceleration of gravity, Cf is the bed-drag coefficient, and Cd is a bulk vegetation drag coefficient. The turbulent diffusivity, Dz, depends on the turbulence velocity scale (({{k}_{t}}^{-1/2})) and integral length-scale (lt), i.e., ({D}_{z}={alpha }_{z}sqrt{{k}_{t}}{l}_{t}), in which αz is a scale constant that depends on both the solid volume fraction, ϕ, and vegetation arrangement51. For the marsh considered in this study, αz = 0.44 to 0.93. Within vegetation, lt and kt are shaped by the vegetation. When d ≤ ∆s (average distance to nearest neighboring stem), lt = d15,51. The vegetation-generated kt within a marsh of rigid, emergent stems can be estimated from Tanino and Nepf51, ({k}_{t}={gamma }^{2}{left({C}_{d}frac{n{d}^{2}}{2(1-phi )}right)}^{2/3}{U}^{2}), in which γ is a scale coefficient (γ2 = 1.1 ± 0.2) and ϕ = πnd2/4 is the solid volume fraction. The bed-generated turbulence is related to the bed shear stress (τ = ρCfU2). Specifically, τ/ρ = ξkt with the scale coefficient ξ = 0.20 ± 0.0152. Combining the vegetation- and bed-generated turbulence, the total turbulence within the marsh is
A no-flux (reflecting) boundary condition was applied to the water surface. Unlike many previous studies, which define the bed as a reflecting condition22,49, our model accounted for sediment deposition and resuspension at the bed. Within the model, the vegetation impacts sedimentation through its influence on diffusivity and resuspension. Particles are deposited on the bed if the vertical displacement within a time-step passed below the bed level (i.e., z position at time-step i, zi ≤ 0). If a particle is deposited, it will cease to move until it is re-entrained. A probabilistic approach was used to represent resuspension53. The resuspension probability was determined by the frequency of entrainment of a particle from the bed, fe, described by the erosion rate, E (m/s). Specifically, the frequency fe = E/D, in which D is the sediment grain size. For each deposited particle, a random number Gr from a uniform distribution (0,1) was generated at each time-step ∆t. If Gr ≤ fe ∆t, the deposited particle resuspended53, otherwise it remained deposited.
A nonlinear erosion model provides a good description of the erosion of cohesive sediment54,55. There is no universally accepted methodology to estimate the critical shear stress τc from soil properties56, so the best method is a direct measurement in the laboratory or field. Following the method in Walder55, measurements of erosion rate E (m/s) and bed shear stress τ in the Lower Mississippi River Delta, Barataria and Breton Sound (unpublished data, The Water Institute of the Gulf) were fit to the following model,
in which (widetilde{Phi }) is the dimensionless erosion rate, (widetilde{Phi }=({rho }_{d}/{rho }_{s})left(E/sqrt{frac{{tau }_{c}}{rho }}right)) with τc the critical shear stress, ρ the fluid density, ρs the grain density, and ρd the bulk dry density; (widetilde{{tau }_{e}}) is the dimensionless excess shear stress, (widetilde{{tau }_{e}}=left(tau -{tau }_{c}right)/{tau }_{c}). The data provided a fitted estimate of scale coefficient β; exponent m, and critical shear stress τc. Thus, the erosion rate can be estimated by
When τ ≤ τc, the erosion rate is zero, i.e., no resuspension. Note that τc was used in fitting the erosion function was determined with Sedflume under bare bed conditions57.
Recent studies have shown that turbulence generated by vegetation can lower the threshold for sediment motion, reducing the critical shear stress τc,n and critical velocity Uc,n within the marsh24,29,30,58. For flat bare beds, the role of turbulence is inherently represented in τc because bed shear stress has a linear relationship with TKE (τ/ρ = ξkt)59. With this relation, τc can be converted to an equivalent turbulence threshold58. If we assume that the magnitude of TKE determines the onset of resuspension, we can equate the critical turbulence defined for bare bed, kt,c0 (=τc/ξρ, with subscript “0” for bare bed), to the TKE in a marsh of stem density n, and solve for the ratio of critical velocity for resuspension in vegetated (Uc,n) and bare (Uc,0) beds, as in Yang58:
For consistency with previous work, we cast this in terms of the Shields parameter,
Combining Eqs. (M8) and (M9), the ratio of vegetated to bare bed critical Shields parameter (θc,n/θc,0) or critical shear stress (τc,n/τc,0) is29:
Using Eq. (M10), the critical shear stress for a marsh with stem density n, τc,n, was estimated from the critical shear stress for a bare bed with the same sediment and used in Eq. (M7).
This study simulated the flux of water and sediment from a channel onto a marsh platform with different densities of emergent vegetation based on typical conditions of marshes collected from the literatures18,19,20,21. The flow entering the marsh platform was driven by the water surface slope (S) between the channel and marsh platform. Flow direction was assumed to be perpendicular to the marsh edge. For the base cases, S = 0.0005 and water depth H = 0.3 m. The grain size of marshes generally ranges from D = 10 to 70 µm18,19,20,21. For simplicity, we considered uniform silt with D = 50 µm (ρs = 2650 kg/m3). The settling velocity, ws, was estimated using the Ferguson and Church formulation60. For D = 50 µm, ws = 2.1 mm/s, which falls in the range for mud from the previous studies61. The bed-drag coefficient, Cf, was set to a spatially and temporally constant value of 0.00520.
Common vegetation species in the marshes have stem diameters d ranging from 0.5 cm to 1.5 cm18,19,20,21. A diameter of 1 cm was chosen in the base cases. The vegetation density, n, varied from 0 to 500 stems/m2 (16 different values), which spans values observed in the field. The vegetation drag coefficient Cd was taken as 1.062. For simplicity, the vegetation on the marsh was assumed to be emergent, such that the vegetation height in the model was set to the depth H. To capture attributes of different estuaries and marshes and the seasonal effects of vegetation growth and water flux, additional slopes (S = 0.001 and 0.00025) and stem diameters (d = 0.5 and 1.5 cm) were considered.
In the RDM, particles were released continuously and uniformly over the depth at the marsh edge (x = 0, Fig. 1), and the model was run for 1000 s, which ensured that the sedimentation rate (i.e., net deposition rate qd) reached an equilibrium state (Supplementary, S1). Simulations with different particle numbers, N, and time-step, ∆t, ranging from 10,000 to 100,000 and 0.01 to 0.1 s, respectively, confirmed that the solution was insensitive to particle number and time-step within this range (varied by less than 6.5%). A particle number of 50,000 and a time-step of 0.05 s were adopted to satisfy stability criteria. Each case was repeated for ten realizations, and the ensemble average was used in the reported results. As an example of statistical variation, the ensemble standard deviation is shown with gray shading in Fig. 3b.
Field data from Beltrán-Burgos19 was compared to model simulations. The study measured velocity, sediment, and vegetation parameters at different stages during the growing season between April and August 2019 within the Cubits Gap sub-delta in the MRD (Fig. 1b, c). Details of the field measurements can be found in Chapter 3 in ref. 19. The vegetation at the mudflat included Potamogeton nodosus, Stuckenia pectinate, and Potamogeton crispus. For simplicity, we based the model vegetation on the dominant species Potamogeton nodosus, which has oval leaves (~15 cm long and ~2 cm wide). Vegetation coverage, Vc, defined as the fraction of horizontal surface area obstructed by plants, was estimated on April 24, June 3, and July 1, using random quadrat (0.25 m2) surveys and recrelated species, Potamogeton malainus, ref. 63 correlated Vc measured with underwater digital imaging to the one-side leaf area index (LAI, surface area per bed area). The empirical relation (See Fig. 8 in ref. 63) was applied in the present study. LAI is a reasonable estimate for plant frontal area per bed area, such that ndH = ({{mbox{LAI}}}) in Eq. (M4). The measured velocity and LAI were used in Eq. (M4) to estimate water surface slope, S. In Potamogeton species, the stems are small compared to the leaves, such that the leaf width was assumed to determine the turbulence length-scales, i.e., lt = lw. Turbulence length-scale defined by leaf width was also observed for Typha in Xu and Nepf27. Since the leaves contributed the majority of plant frontal area63, we defined vegetation density based on leaf area, i.e., nl (leaves/m2) = LAI ⁄Al, with Al the area of one leaf.
The sedimentation rate, qd, was defined by the total number of particles deposited, Mnd,n, over domain area, A, and simulation time, T, i.e.,
Because the lateral dimension, and thus A, is not explicitly defined within the model, a direct comparison between RDM and measured qd would only be possible through calibration. To eliminate the need for calibration, the measured and simulated sedimentation rates, qd, were normalized by their maximum value in July, i.e., (widetilde{{q}_{d}}={q}_{d}/{q}_{d,{July}}). The normalized sedimentation rates are shown in Fig. 5.
The field data in this study are extracted from the study19. The data generated in this study have been deposited in the Zenodo database (https://doi.org/10.5281/zenodo.6754621).
Syvitski, J. P. M. et al. Sinking deltas due to human activities. Nat. Geosci. 2, 681–686 (2009).
ADS CAS Article Google Scholar
Blum, M. D. & Roberts, H. H. Drowning of the Mississippi Delta due to insufficient sediment supply and global sea-level rise. Nat. Geosci. 2, 488–491 (2009).
ADS CAS Article Google Scholar
Arkema, K. K. et al. Coastal habitats shield people and property from sea-level rise and storms. Nat. Clim. Change 3, 913–918 (2013).
ADS Article Google Scholar
Paola, C. et al. Natural processes in delta restoration: application to the Mississippi Delta. Annu. Rev. Mar. Sci. 3, 67–91 (2011).
ADS Article Google Scholar
Syvitski, J. P. M., Vörösmarty, C. J., Kettner, A. J. & Green, P. Impact of humans on the flux of terrestrial sediment to the global coastal ocean. Science 308, 376–380 (2005).
ADS CAS PubMed Article Google Scholar
Morton, R. A., Bernier, J. C., Barras, J. A. & Ferina, N. F. Historical subsidence and wetland loss in the Mississippi Delta plain. Trans. Gulf Coast Assoc. Geol. Soc. 55, 555–571 (2005).
Google Scholar
Kirwan, M. L. & Megonigal, J. P. Tidal wetland stability in the face of human impacts and sea-level rise. Nature 504, 53–60 (2013).
ADS CAS PubMed Article Google Scholar
Murray, N. J. et al. The global distribution and trajectory of tidal flats. Nature 565, 222–225 (2019).
ADS CAS PubMed Article Google Scholar
Jankowski, K. L., Törnqvist, T. E. & Fernandes, A. M. Vulnerability of Louisiana’s coastal wetlands to present-day rates of relative sea-level rise. Nat. Commun. 8, 14792 (2017).
ADS CAS PubMed PubMed Central Article Google Scholar
Couvillion, B. R., Beck, H., Schoolmaster, D. & Fischer, M. Land Area Change in Coastal Louisiana (1932 to 2016). Map 3381 (U.S. Geological Survey, 2017).
Coastal Protection and Restoration Authority of Louisiana. Louisiana’s Comprehensive Master Plan for a Sustainable Coast. (Coastal Protection and Restoration Authority of Louisiana, 2017).
Esposito, C. R., Shen, Z., Törnqvist, T. E., Marshak, J. & White, C. Efficient retention of mud drives land building on the Mississippi Delta plain. Earth Surf. Dynam. 5, 387–397 (2017).
ADS Article Google Scholar
Nardin, W. & Edmonds, D. A. Optimum vegetation height and density for inorganic sedimentation in deltaic marshes. Nat. Geosci. 7, 722–726 (2014).
ADS CAS Article Google Scholar
Styles, R. et al. Seasonal controls on sediment delivery and hydrodynamics in a vegetated tidally influenced interdistributary island. J. Geophys. Res. Oceans 126, e2020JC016146 (2021).
ADS Article Google Scholar
Nepf, H. M. Flow and transport in regions with aquatic vegetation. Annu. Rev. Fluid Mech. 44, 123–142 (2012).
ADS MathSciNet MATH Article Google Scholar
Fagherazzi, S. et al. Numerical models of salt marsh evolution: ecological, geomorphic, and climatic factors. Rev. Geophy. 50, (2012).
Nepf, H. M. Hydrodynamics of vegetated channels. J. Hydraulic Res. 50, 262–279 (2012).
Article Google Scholar
Temmerman, S. et al. Impact of vegetation on flow routing and sedimentation patterns: three-dimensional modeling for a tidal marsh. J. Geophys. Res. Earth Surf. 110, (2005).
Beltrán-Burgos, M. Effects of vegetation seasonality on sediment dynamics in a freshwater marsh of the Mississippi River Delta. MS thesis, Tulane Univ. (2021).
Nardin, W., Edmonds, D. A. & Fagherazzi, S. Influence of vegetation on spatial patterns of sediment deposition in deltaic islands during flood. Adv. Water Resour. 93, 236–248 (2016).
ADS Article Google Scholar
Olliver, E. A., Edmonds, D. A. & Shaw, J. B. Influence of floods, tides, and vegetation on sediment retention in Wax Lake Delta, Louisiana, USA. J. Geophys. Res. Earth Surf. 125, e2019JF005316 (2020).
Xu, Y. & Nepf, H. Suspended sediment concentration profile in a Typha latifolia canopy. Water Resour. Res. 57, e2021WR029902 (2021).
ADS Google Scholar
Yager, E. M. & Schmeeckle, M. W. The influence of vegetation on turbulence and bed load transport. J. Geophys. Res. Earth Surf. 118, 1585–1601 (2013).
ADS Article Google Scholar
Tinoco, R. O. & Coco, G. Observations of the effect of emergent vegetation on sediment resuspension under unidirectional currents and waves. Earth Surf. Dyn. 2, 83–96 (2014).
ADS Article Google Scholar
White, B. L. & Nepf, H. M. Shear instability and coherent structures in shallow flow adjacent to a porous layer. J. Fluid Mech. 593, 1–32 (2007).
ADS MATH Article Google Scholar
Temmerman, S. et al. Vegetation causes channel erosion in a tidal landscape. Geology 35, 631–634 (2007).
ADS Article Google Scholar
Xu, Y. & Nepf, H. Measured and predicted turbulent kinetic energy in flow through emergent vegetation with real plant morphology. Water Resour. Res. 56, e2020WR027892 (2020).
ADS Google Scholar
Pritchard, D. Rate of deposition of fine sediment from suspension. J. Hydraulic Eng. 132, 533–536 (2006).
Article Google Scholar
Tinoco, R. O. & Coco, G. Turbulence as the main driver of resuspension in oscillatory flow through vegetation. J. Geophys. Res. Earth Surf. 123, 891–904 (2018).
ADS Article Google Scholar
Liu, C., Shan, Y. & Nepf, H. Impact of stem size on turbulence and sediment resuspension under unidirectional flow. Water Resour. Res. 57, e2020WR028620 (2021).
ADS Google Scholar
Duvall, M. S., Wiberg, P. L. & Kirwan, M. L. Controls on sediment suspension, flux, and marsh deposition near a bay-marsh boundary. Estuaries Coasts 42, 403–424 (2019).
CAS Article Google Scholar
Temmerman, S., Govers, G., Wartel, S. & Meire, P. Spatial and temporal factors controlling short-term sedimentation in a salt and freshwater tidal marsh, Scheldt estuary, Belgium, SW Netherlands. Earth Surf. Process. Landf. 28, 739–755 (2003).
ADS Article Google Scholar
Moskalski, S. M. & Sommerfield, C. K. Suspended sediment deposition and trapping efficiency in a Delaware salt marsh. Geomorphology 139–140, 195–204 (2012).
ADS Article Google Scholar
Bevington, A. E. & Twilley, R. R. Island edge morphodynamics along a chronosequence in a prograding deltaic floodplain wetland. J. Coast. Res. 344, 806–817 (2018).
Article Google Scholar
Zong, L. & Nepf, H. Spatial distribution of deposition within a patch of vegetation. Water Resour. Res. 47, W03516 (2011).
ADS Article Google Scholar
Jacobs, W., Le Hir, P., Van Kesteren, W. & Cann, P. Erosion threshold of sand–mud mixtures. Continental Shelf Res. 31, S14–S25 (2011).
Article Google Scholar
Luhar, M., Rominger, J. & Nepf, H. Interaction between flow, transport and vegetation spatial structure. Environ. Fluid Mech. 8, 423 (2008).
Article Google Scholar
Wright, K., Hiatt, M. & Passalacqua, P. Hydrological connectivity in vegetated river deltas: the importance of patchiness below a threshold. Geophys. Res. Lett. 45 10,416–10,427 (2018).
Borgas, M. S. & Sawford, B. L. A family of stochastic models for two-particle dispersion in isotropic homogeneous stationary turbulence. J. Fluid Mech. 279, 69–99 (1994).
ADS MathSciNet CAS MATH Article Google Scholar
Hoteit, H., Mose, R., Younes, A., Lehmann, F. & Ackerer, P. H. Three-dimensional modeling of mass transfer in porous media using the mixed hybrid finite elements and the random-walk methods. Math. Geol. 34, 435–456 (2002).
MathSciNet MATH Article Google Scholar
Tsai, C. W. & Huang, S.-H. Modeling suspended sediment transport under influence of turbulence ejection and sweep events. Water Resour. Res. 55, 5379–5393 (2019).
ADS Article Google Scholar
Gardiner, C. W. Stochastic Methods (Springer, 2009).
Taylor, G. I. Dispersion of soluble matter in solvent flowing slowly through a tube. Proc. R. Soc. Lond. Ser. A. Math. Phys. Sci. 219, 186–203 (1953).
ADS CAS Google Scholar
Tsai, C. W., Hung, S. Y. & Wu, T.-H. Stochastic sediment transport: anomalous diffusions and random movement. Stoch. Environ. Res. Risk Assess. 34, 397–413 (2020).
Article Google Scholar
Wilson, J. D. & Yee, E. A critical examination of the random displacement model of turbulent dispersion. Bound. Layer. Meteorol. 125, 399–416 (2007).
ADS Article Google Scholar
Absi, R. Concentration profiles for fine and coarse sediments suspended by waves over ripples: an analytical study with the 1-DV gradient diffusion model. Adv. Water Resour. 33, 411–418 (2010).
ADS Article Google Scholar
Follett, E., Chamecki, M. & Nepf, H. Evaluation of a random displacement model for predicting particle escape from canopies using a simple eddy diffusivity model. Agric. For. Meteorol. 224, 40–48 (2016).
ADS Article Google Scholar
Israelsson, P. H., Kim, Y. D. & Adams, E. E. A comparison of three Lagrangian approaches for extending near field mixing calculations. Environ. Model. Softw. 21, 1631–1649 (2006).
Article Google Scholar
Huai, W. et al. Predicting the vertical low suspended sediment concentration in vegetated flow using a random displacement model. J. Hydrol. 578, 124101 (2019).
Article Google Scholar
Baptist, M. Modelling floodplain biogeomorphology. PhD thesis, Delft Univ. Technology (2005).
Tanino, Y. & Nepf, H. M. Lateral dispersion in random cylinder arrays at high Reynolds number. J. Fluid Mech. 600, 339–371 (2008).
ADS MATH Article Google Scholar
Soulsby, R. L. Measurements of the Reynolds stress components close to a marine sand bank. Mar. Geol. 42, 35–47 (1981).
ADS Article Google Scholar
Lackey, T. & Macdonald, N. The particle tracking model description and processes. In Proc. XVIII World Dredging Congress 2007, WEDA, Lake Buena (2007).
Houwing, E.-J. & van Rijn, L. C. In situ erosion flume (ISEF): determination of bed-shear stress and erosion of a kaolinite bed. J. Sea Res. 39, 243–253 (1998).
ADS Article Google Scholar
Walder, J. S. Dimensionless erosion laws for cohesive sediment. J. Hydraulic Eng. 142, 04015047 (2015).
Article Google Scholar
Knapen, A., Poesen, J., Govers, G., Gyssels, G. & Nachtergaele, J. Resistance of soils to concentrated flow erosion: A review. Earth Sci. Rev. 80, 75–109 (2007).
ADS Article Google Scholar
McNeil, J., Taylor, C. & Lick, W. Measurements of erosion of undisturbed bottom sediments with depth. J. Hydraulic Eng. 122, 316–324 (1996).
Article Google Scholar
Yang, J. Q., Chung, H. & Nepf, H. M. The onset of sediment transport in vegetated channels predicted by turbulent kinetic energy. Geophys. Res. Lett. 43, 11,261–11,268 (2016).
Google Scholar
Stapleton, K. R. & Huntley, D. A. Seabed stress determinations using the inertial dissipation method and the turbulent kinetic energy method. Earth Surf. Process. Landf. 20, 807–815 (1995).
ADS Article Google Scholar
Ferguson, R. I. & Church, M. A simple universal equation for grain settling velocity. J. Sediment. Res. 74, 933–937 (2004).
ADS Article Google Scholar
Lamb, M. P. et al. Mud in rivers transported as flocculated and suspended bed material. Nat. Geosci. 13, 566–570 (2020).
ADS CAS Article Google Scholar
Nepf, H. M. Drag, turbulence, and diffusion in flow through emergent vegetation. Water Resour. Res. 35, 479–489 (1999).
ADS Article Google Scholar
Zhao, D., Xie, D., Zhou, H., Jiang, H. & An, S. Estimation of leaf area index and plant area index of a submerged macrophyte canopy using digital photography. PLoS ONE 7, e51034 (2012).
ADS CAS PubMed PubMed Central Article Google Scholar
Download references
This study received support from the National Natural Science Foundation of China (51879138), US NSF Grant EAR 1854564, and the National Academies of Sciences, Engineering, and Medicine under Grant Agreement number 2000008941. The authors thank Elizabeth Follett for her assistance with the numerical model. The authors also thank Danxun Li, Liecai Cao, and Yanchong Duan for their discussions.
State Key Laboratory of Hydroscience and Engineering, Department of Hydraulic Engineering, Tsinghua University, Beijing, China
Yuan Xu
Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
Yuan Xu & Heidi M. Nepf
The Water Institute of The Gulf, Baton Rouge, LA, USA
Christopher R. Esposito
Department of Earth and Environmental Sciences, Tulane University, New Orleans, LA, USA
Christopher R. Esposito & Maricel Beltrán-Burgos
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
H.M.N. and Y.X. designed the study. Y.X. and H.M.N. built the model. C.R.E. and M.B.-B. contributed field insights and field data. Y.X. drafted the paper. All authors contributed to the interpretation of the results and editing of the text.
Correspondence to Yuan Xu.
The authors declare no competing interests.
Nature Communications thanks Laurel Larsen, William Nardin and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Xu, Y., Esposito, C.R., Beltrán-Burgos, M. et al. Competing effects of vegetation density on sedimentation in deltaic marshes. Nat Commun 13, 4641 (2022). https://doi.org/10.1038/s41467-022-32270-8
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-022-32270-8
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Advanced search
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.
Meet the self-produced artist who sings about aliens and zodiac signs – INQUIRER.net
SCOUT Friday Picks is our dedicated column on music, with a focus on familiar faces and new, young voices. For recommendations on who you want us to feature next, tag us on Twitter and Instagram at @scoutmagph.
There are various reasons artists produce music. Some express activism while others empower people. There are also those who want to curse their exes in a ~creative~ way and those whose goal is to simply see you bop your head to their songs.
Then there’s XTIE, a Hong Kong-based self-produced indie artist who uses music to channel her emotions and react to real-life situations. “I often have pent-up emotions I want to release—like anger, sadness, and frustration—so I create music to channel them,” XTIE opens up in a chat with Scout. “I get inspiration from my daily life, my friends, and also the things happening around the world.”
With honest, candid, and sometimes, humorous lyrics, it’s easier for the producer-artist to express herself in this fashion. Although she often uses fictional and extraterrestrial entities in songwriting, the general themes of her tracks have always been inspired by her personal experiences.
So far, XTIE has released singles about being occasional enemies with your friends, Virgo kids who constantly put unnecessary pressure on themselves, and building a flower town to escape the chaos brought by reality. Oh, and can you believe she also wrote a song from the perspective of an alien?
Uh-huh, her latest single “Spaceship” is about an alien observing Earth and seeing people repeat history and their mistakes. It’s a song that hopes to transport you to a world free of bad habits, toxicity, and many other absurd issues humans face. Production-wise, “Spaceship” has a dreamy and ethereal vibe (as if to mimic the feeling of floating in space) and is accompanied by various ’70s and ’80s sound elements.
“I’ve always wanted to be a singer,” XTIE shares without a moment of hesitation. “When I was in primary and secondary school, I took part in a lot of singing competitions. That’s when I realized I [wanted] to sing.”
During that time, the singer-songwriter was just a young girl with big dreams who had no idea that there’s an industry supporting people who want to do music professionally. So when she finally learned more about the music scene, her desire to produce songs intensified—if not for herself, then at least for other artists.

“I started writing songs when I was in high school. Then it came to a point when I wanted to make better demos and that’s how I started learning [music] production on YouTube,” she tells us. Soon after self-learning, she became a songwriter and/or producer for a number of local artists in Hong Kong (and some Korean acts) before ultimately deciding to pursue her own singing career.
Those who have already checked out XTIE’s stuff would quickly notice the common denominator among all of her songs: bubblegum pop influences, catchy vocal chops, and euphoric dancefloor moments.
When asked if there’s a specific reason she decided to focus on these genres, she answered: “Growing up, I listened to a lot of electropop and western EDM [songs]. So when I [was just starting] out [as] an artist, I mainly produced soft electropop music.”
Her vocal texture was a big factor, too. The moment she realized she tends to sing “really” lightly, she immediately figured the lighter subgenres of pop would suit her voice more. Plus, these kinds of music (which she collectively calls the “ear candy kind of sound”) fit her personal taste.
XTIE also reveals that she often uses her voice to tweak her demos and do sound design. “I think that’s what makes my soundscape more unique. I use my voice to do some music production by layering it until it becomes lighter.”
“I love Taylor Swift since I was 16 or 17. She was the first woman I knew that could actually write songs and speak for herself,” says the producer-artist. “She’s a huge icon—one of the most famous women in the music scene—so she inspires me a lot.”
On the production side, she looks up to Troye Sivan and Lauv, who both had a “DIY artist” journey. According to XTIE, these two artists reminded her that she could be her own artist using her authentic sound. She was inspired by how they were able to grow their music careers without higher-ups telling them what to do, especially when they were still starting out.
When asked about her favorite self-produced songs, she becomes more like her lyrics—relaxed and candid. You can tell making music brings her genuine happiness, if her growing smile while talking is anything to go by.
“It’s actually an unreleased song, which I recently finished the production. It’s for a local artist in Hong Kong who went independent after being with a big label for years,” says XTIE. Despite being unreleased, she didn’t hesitate to share what it is about. “It’s about online verbal bullying—how people on the internet just kind of attack somebody without really knowing their story.”
As public figures working in the music scene, specifically, there will be people quick to judge them based on how they sing, how they look, or how they do things. So XTIE (and the artist she’s producing this song for) wanted to address how words can kill, but also heal people.
As for her own releases, she considers “Frenemy” the closest to her heart. It’s her most personal song because she wrote it when she got a bit disappointed with her friends who weren’t supportive of her indie artist journey. “Plus, we have this tendency to compare ourselves to others and be jealous of their accomplishments, especially now that social media plays a huge influence in shaping our lives. ‘Frenemy’ also touches on that topic,” she adds.
For most artists, a creative block happens when inspiration temporarily stops flowing. It could come in the form of zoning out when you’re supposed to be writing lyrics or entirely losing interest in your work. But the Hong Kong-based artist hasn’t experienced anything like it in a long while. “I have this small notebook I always carry around, so whenever a story, an idea, or even a keyword pop in my head, I can easily jot them down.”
There are also times when random beats invade her mind even during time off work. Whenever that happens, she would quickly open her phone and make a rough draft of loops, chord progressions, sound choices, and sound design.
So for XTIE, a creative block happens when she can’t tell if the song is already in its best version. “I usually ask myself, ‘Is the production really done? Do I still need to add one more layer of a sound choice? Should I have this element panned to the right? Oh, maybe I can improve this bit.’ There’s a lot of decision-making behind it, and sometimes, I couldn’t determine if the song’s finished,” she admits.
But the good thing about being able to write and produce on her own is freedom. XTIE reveals that whenever she experiences this kind of block, she would immediately take a step back and breathe. She doesn’t stress over strict deadlines because she’s her own boss.
As a woman navigating the industry, XTIE wants to see an environment where women are able to achieve as much as men do. “Let women in music thrive. I want to witness more women succeed on their music journey,” she says. She’s also waiting for the time when people would stop addressing her as a “female” producer.
Right now, XTIE is currently preparing for her debut album to be released in March. Its working title is “Oxymoron,” and it fittingly involves putting together contrasting ideas.
“What’s special about this album is the people I’m gonna be working with. For my previous releases, I did everything on my own—writing, producing, and performing. But for ‘Oxymoron,’ I invited several producers (who are all women) to collaborate with me,” XTIE shares. “It’s gonna be an album celebrating women in music.”
This article was first published on Scout Magazine
By providing an email address. I agree to the Terms of Use and acknowledge that I have read the Privacy Policy.
CURRENT.DYNAMIC.INSIDER.
Mall Grab is ready for the next level – DJ Mag
On his debut album, ‘What I Breathe’, Aussie-born, London-based DJ and producer Mall Grab marks a new creative chapter in his journey, far from the lo-fi house sound that shot him into the spotlight in 2015. Filled with grime and jungle influences, tracks featuring Novelist, D Double E, Nia Archives and Turnstile’s Brendan Yates, as well as his own vocals, it’s his most ambitious work to date. Here, Kristan Caryl chats to him about ADHD, being an outsider, dogs, style, hardcore and more
In 2017, Jordon Alexander very quickly went from little-known hopeful to top-tier house star. “When I got all that clout it does fuck up how you think of things,” he says, looking back with a slight sense of embarrassment. “It warps your view on the world. I was young. Pretty stupid. Just a little dumb c*nt thrust into a certain position and out to make a point.”
Five years later, there is no shred of ego about him. He talks sensitively and sensibly. At 28, he seems comfortable with who he is, and where he’s at. And he should be, with an accomplished debut album out now, a full schedule of bookings and a strong community of artists he is proud to support on his Steel City Dance Discs label. But there have been some bumps along the way.
One of them was partying too much. He would deal with the “nervousness and insecurities” of his new-found success “with binge drinking”, which is a common but little discussed problem in the dance music industry. Eventually, “it just gets sad,” he says in his gentle Aussie lilt. “You lose your zest for life. It was almost like an identity crisis. My personality and my stage persona merged into one, so I didn’t know where Mall Grab started and Jordon ended. I realised that drinking was a catalyst in all that.”
To combat this, Jordon has gone sober for extended periods on a couple of occasions. Each time reminds him of why he got into making and playing music in the first place. He says it can be fun to play in a right old state, but that there is nothing more satisfying than playing straight-headed: “It’s an amazing experience. The conversations you have are much more meaningful. Everything is just more genuine because if there is too much partying it becomes boring. You get jaded, you lose inspiration.”
Jordon has lived with ADHD all of his life, and it’s exacerbated by drinking. If unchecked, he says, it can lead to severe personality disorders, “which I think has definitely come out in some ways in the past”. These days he gets regular therapy to help on that front. “It’s the most helpful thing that I’ve ever done. It helps me deal with things, find out what’s toxic and just bring up all the stuff I’ve repressed.”
During the pandemic, though, he again struggled “quite a lot” with drinking and partying because “there was nothing else to do”. Many musicians turned to production for a way out of lockdown loneliness, but Mall Grab found no solace in his software. Instead, inspiration left him and he found himself in a vicious cycle of trying to sit down to write, failing to come up with anything, getting frustrated and hitting the beers. “It was like when I was at school, when I would get into something for a while and it would be going well, but then I’d lose my focus and wouldn’t be able to get it back so I would just be like, ‘Fuck this, fuck everything’.”
At first, Jordon “felt like an outsider”, partly because he was Australian and didn’t know anyone in the scene, and partly because his apparent overnight success made him a target for those who saw him as competition. He initially blew up at the heart of the much-hyped but short-lived ‘lo-fi house’ sound. The truth is, as with anything from Larry Heard’s rough-edged deep house to raw Motor City techno, that dusty and DIY aesthetic was just a result of the basic software he used to make his music. At the time, he hated the term, but now enough time has passed for him to appreciate what it did for him.
“The reason it sounded like that was because I was just not as good a producer as I am today,” he smiles, as he once again tucks his classic mid-length surfer hair behind his ears. That began to change in 2018 with his ‘How The Dogs Chill, Vol.1’ EP, which, he reckons, featured “the last lo-fi house tune” alongside a showcase of newer, harder sounds that have become his signature. “It was a real learning curve,” he says. “You get to a stage where you stop caring about everyone else and just focus on the people that do support you. I wanted to learn more, to focus on making my own sound.”
The house music of Mall Grab’s first few releases on labels like 1080p was quite different to the Talking Heads records he first started DJing with as a 12-year-old. They were borrowed from his father and played on a rudimentary setup next to second-hand disco music in local bookstores. It was the fizzing electro and blog house of labels like Ed Banger in 2007 and 2008 that turned him onto contemporary club sounds, while the legendary radio stations on Grand Theft Auto: San Andreas completed the first phase of his learning.
When we speak, Jordon is wearing a Righteous Jams t-shirt with a logo stylised like the famous Def Jam Recordings label. They’re a hardcore and punk band from Boston and a nod to the other side of his music taste: at school, he played in various bands, but owing to his “not very sociable side” he says he was never really a part of any scene until he got into electronic music. Most of the bands were inspired by classic skating sounds.
He still skates today, partly as a way of exercising, but partly for the rush of nostalgia that takes him back to those early years, especially the music. “I think a huge part for people who even just played Tony Hawk Pro Skater video games was the soundtrack. I definitely got heaps of my music taste from that, and from the skating videos, especially on the punk and hardcore side of things.”
Jordon is sat in a flat he shares with his best friend — who also does all his label artwork — and the friend’s fiancee. There’s an empty clothes horse behind him, and three original pieces of art on the wall by Korean video artist Nam June Paik, pop artist Robert Rauschenberg and abstract artist Sam Francis. He started collecting a couple of years ago, firstly because he loves art, but also as a form of investment. “It’s better than buying a car,” he says. “It’s something I can look at every day and get inspiration from.”
“I just love jumping around and dancing. I go through bursts of hyperactivity so hardcore is good for that, but so is DJing. The musical stimulation is like a massage for your brain, as corny as that sounds”
The hustle and bustle of East London’s busy streets drifts in through the windows. The occasional dog bark interrupts us. “I wish it was mine. I love dogs and always had a good rapport with them,” he says, adding that he grew up around the greyhounds his uncle bred. The only other interruptions during our conversation are when Jordon’s own busy thoughts distract him mid-sentence and he loses his thread. It’s a rare sign of his ADHD, because otherwise he comes across as a pretty calm character.
“That’s only because I’m doing this interview,” he reckons. “If we were in a cafe having a coffee or whatever I’d be tapping my feet under the table, constantly looking at my phone and shit, so the ADHD is definitely a big part of my personality.” One way his ADHD comes through is in the music he makes, plays and enjoys: the punk and hardcore he grew up around is high energy and explosive. It’s angry but, to those who listen closely, emotional. “I’m big on endorphins,” he says. “I just love jumping around and dancing. I go through bursts of hyperactivity so hardcore is good for that, but so is DJing. The musical stimulation is like a massage for your brain, as corny as that sounds.”
The day we speak is the day Boris Johnson resigns as UK Prime Minister. It is announced just as we start our Zoom. “Kind of predictable, I suppose,” reckons Jordon, but he falls short of equating Boris’ last few chaotic hours with the storming of Capitol Hill in the US back in January last year. “British people are not as divisive as Americans,” he says. “They’re not as likely to take to the streets, but generally it’s become the same in Australia. Everything has grown so much more partisan.”
He has been in London five years, and by now it feels like home. He misses the “fresher produce” of Australia, as well as “the more consistent weather”, but has a community of friends from Aus that have helped him to feel settled. “We’ve kind of got our own little transplant of Australianisms in amongst the sea of British contrasts.”
His flat is in Haggerston in the London borough of Hackney, right above what is famously said to be the worst Tesco Express in the country. It gives him an interesting perspective on life in the UK. “There’s always something going on there,” he laughs. “Last night, I was watching someone who was wrongly accused of shoplifting. It was all kicking off , so it’s always good to have a sticky beak,” he says as he cranes his neck towards the window, “and listen in when you hear something going on outside.”
It was the practicalities of international travel but also London’s rich music scene that initially took him there. And a lot of his material bears the influence of what he was listening to: he loves jungle, bass, hip-hop and grime, and laments the lack of such strong scenes back in Aus.
“People grow up here with electronic music of all different types. I guess it helps how dense the population is. Whereas Australia is so spread out, there are pockets of things here and there, and now there is a great underground, but back then it was niche. And even if you did get established, there were only a few places in the country you could play, and only play them once or twice a year so you didn’t over-saturate yourself. But here, you are on the doorstep of the world and can be somewhere else, like all over Europe, literally every weekend.”
He grew up 90 minutes north of Sydney in Newcastle, an industrial harbour which is the biggest exporter of coal in the world and was once just as important for the steel industry. It also has picture perfect beaches, a bohemian surf and skate scene, and a university where Jordon started to study Psychology, but quit after a year. “I probably thought I was smarter than I was,” he jokes. “I watched American Psycho, I’d seen Charlie Kaufman movies, so yeah, I thought it would be cool, but I figured out quite quickly that it wasn’t what I wanted to do.” After dropping out, he worked a job delivering pizzas for Domino’s, which he rates. “I just drove around listening to music.”
Now fully embedded in London, he has tried to “tastefully implant” himself into the grime and garage communities he has always respected, rather than just ripping them off in a contrived fashion. On his debut album ‘What I Breathe’ for example, he has sampled a lot of recognisable breaks, but was keen to “bring new life into them”. It also has a magnificent cover featuring six of his favourite dogs, all Golden Retrievers, all hired from someone in Cornwall for a one-day shoot that he had long dreamt of and which “did wonders for my dopamine levels”.
Some of the tracks on the album date back to 2019, when he was making tunes to play a set made up exclusively of his own material at Sónar. In early lockdown, he tried to develop them but, as he has explained, that didn’t work. It was when lockdown ended and he finally began to play out again that he got somewhere and the album felt more like “a coherent project”. He credits working with guest collaborators like Novelist, D Double E, Baltimore hardcore band Turnstile’s frontman Brendan Yates and Nia Archives as “definitely being a big part of the glue that helped make those tracks into an album”.
Many artists use a long-player as a way of stretching their legs into totally new sounds. There is a pressure to do more than on a 12”, to show a different side, to prove your worth. Often that takes the form of trite ambient tracks or overly elaborate synth work. “I totally agree,” says Jordon. “Someone just holding down a key and it all feels a little bit unnecessary. I was much more leaning towards wanting to showcase all my influences and show where I’m going in the future.”
“I would always rather listen to a good banger than some beautiful electronic piece. That’s just the way my brain works”
Over the years, Jordon has mastered the art of making a good banger. Though they might not get the critical acclaim of more heady sounds, they are no easier to perfect. Thankfully, he has not shied away from that signature high-energy style on the album. “I would always rather listen to a good banger than some beautiful electronic piece,” he says. “That’s just the way my brain works.”
On the album, a perfect balance is struck. The tracks — a crisp, potent, eclectic melange of garage, breaks, house, jungle and rave — are not all-out for the dancefloor, but they do pack a punch both physically and emotionally. That nuance can be from Nia Archive’s neo-soul vocals, the poignant bars of Novelist and D Double E, or Mall Grab’s own meaningful melodies. His own singing also appears on two tracks, partly as a way to “kick some stuff out of my head” and party because he couldn’t find the samples he wanted. “I’m really curious to see how people take it,” he says.
One of the tracks he sings on is ‘Lost In Harajuku’. It has a hyper-real feel, with super polished beats and melodies that glow like neon signs in a high-rise future metropolis. Unsurprisingly, then, it was written in a Tokyo hotel room, on GarageBand. “I wanted to write a song that was about how I felt when I was in Japan, because I really love Japan. It’s one of my favourite places in the world. They have a respect for craftsmanship and culture and do everything so well.”
Clothes are one thing in particular he always picks up when he’s in Japan. “Mainly old stuff,” he says. “They take such good care over there. And they’re all in the consignment stores and relatively well priced. They just know what they’re doing and that’s why all the Japanese designers are the ones who lead the modern fashion industry.”
In fact, flipping these clothes became a way to supplement his DJ income in the early days and is something he still does. Packaging and shipping stuff off, along with “menial stuff like scrolling social media” are some of the distractions that can take him away from doing things he should be doing. For that reason, he enjoys starting his days early so that if he does get distracted he still has time to get back to his to-do list. That’s why our call begins at the record-for-a-DJ time of 9:30am.
“Fuck!” he cuts in at 10:39am. “I actually had a house viewing at 10:30.” He’s looking to buy a place, maybe with a backyard, hopefully for a dog “when I’ve slowed down”. Given the list of works in progress he reels off — a mixtape with rappers, a second album, a side-project with his guitar, and reigniting his passion for DJing now he is sober — that still seems a long way off.
Kristan J Caryl is a freelance writer. Follow him on Twitter
Want more? Check out Nia Archives Fresh Kicks mix and interview here
Thrust Publishing Ltd, Unit 3, 30-40 Underwood Street, London, N1 7JQ, United Kingdom. Tel: +44(0)7940488008
🌱 Old Spanish Sugar Mill Closing + Orlando Recovers Stolen Equipment – Patch
Hello again, everybody! It’s me, Carlos Hernandez, your host of the Orlando Daily. Here are all the most important things to know about what’s happening locally.
Now, today’s weather:
A t-storm around in the p.m.. High: 96 Low: 78.
👀 Attention local businesses & marketers: Attract more customers in Orlando by sponsoring this daily newsletter, which gets read by the same people you’re trying to reach. Click here to learn more.
Here are the top five stories in Orlando today:
1. The Old Spanish Sugar Mill inside DeLeon Springs State Park is closing after nearly six decades serving residents due to their contract not being renewed. The last day of operation will be September 12 with a new vendor taking over on October 1. (Orlando Weekly)
2. A man was killed and a woman and teenager were injured in a shooting in Orange County, according to police. The incident happened on Holly Creek Road in Zellwood. An investigation is underway. (WFTV)
3. A naked Florida man armed with a machete who allegedly tried to steal another man’s clothes was arrested Monday morning at a DeLand gas station, according to the Volusia Sheriff’s Office. Brandon Wright. 34, is facing charges of attempted robbery with a deadly weapon, aggravated battery with a deadly weapon and aggravated assault with a deadly weapon. (Fox 35)
4. City of Orlando has recovered equipment it said was stolen days after launching litigation against Mad Cow Theatre. “We had been negotiating with the city in good faith over these items,” said Mad Cow Theatre Executive Director Mitzi Maxwell. (Subscription: Orlando Sentinel)
5. Kimco Realty acquired Colonial Plaza last year and wants to convert the retail plaza into mixed-use multifamily housing. Buildings could reach up to seven stories high, if approved by City of Orlando. (Click Orlando)
Today in Orlando:
From my notebook:
More from our sponsors — thanks for supporting local news!
Featured businesses:
Events:
Thanks for following along and staying informed. I’ll see you around!
— Carlos Hernandez
About me: Hello my name is Carlos Hernandez and I am a food writer with over 10 years of experience in the industry. I write the food blog Carlos Eats (http://www.carloseats.com) and also contribute to several newspapers and magazines with food-related blogs and articles.
Have a news tip or suggestion for an upcoming Orlando Daily? Contact me at [email protected]
Get more local news delivered straight to your inbox. Sign up for free Patch newsletters and alerts.
'Ghost footprints' left by ancient hunter-gatherers discovered in Utah desert – Livescience.com
Live Science is supported by its audience. When you purchase through links on our site, we may earn an affiliate commission. Here’s why you can trust us.
By published
The eerie prints appear only after it rains.
Researchers accidentally discovered the unusual impressions in early July as they drove to another nearby archaeological site at Hill Air Force Base in Utah’s Great Salt Lake Desert. The team initially only found a handful of footprints, but a thorough sweep of the surrounding area using ground-penetrating radar (GPR) revealed at least 88 individual footprints belonging to a range of adults and children, potentially as young as 5 years old. (The GPR technique works by firing radio waves into the ground that bounce off objects that are hidden under the surface.)
The ghostly prints were left by bare human feet at least 10,000 years ago when the area was still a vast wetland. However, researchers suspect that the tracks could date back as far as 12,000 years ago during the final stretch of the last ice age during the Pleistocene epoch (2.6 million to 11,700 years ago).
The discovery of so many ancient footprints is a “once-in-a-lifetime discovery,” Anya Kitterman, the cultural resource manager at Hill Air Force Base who oversaw the archaeological work, said in a statement (opens in new tab). “We found so much more than we bargained for.”
However, the discovery has not yet been published in a peer-reviewed journal because researchers are still analyzing the footprints.
Related: 100,000-year-old Neanderthal footprints show children playing in the sand
The Great Salt Lake Desert was once covered by a large, salty lake similar to the nearby Great Salt Lake — the largest saltwater lake in the Western Hemisphere — which the desert is named after. The ancient lake slowly dried up due to changes in Earth‘s climate triggered by the end of the last ice age, which left behind the salts that were once dissolved in the water. But during the transition from lake to dry salt flats, the area was briefly a large wetland that was occupied by humans up until 10,000 years ago, according to the statement.
During this time, the conditions would have been perfect to create the ghost footprints, the researchers said.
Normally, when it rains, the water is quickly absorbed deep into the surrounding sediment, which means the ground quickly returns to its normal color. But when the rain falls on top of the hidden muddy footprints, the water gets trapped, creating patches of dark and wet sediment that stand out from their surroundings.
Less than a mile (1.6 kilometers) away from where the tracks were uncovered, a previous research group uncovered a hunter-gatherer camp dating to 12,000 years ago, where the humans who left the prints might have lived. Archaeological finds at the site included an ancient fireplace, stone tools used for cooking, a pile of more than 2,000 animal bones and charred tobacco seeds, which are the earliest evidence of tobacco use in humans.
The researchers involved with the new finding have collected some of the footprints in order to determine their exact age. Using radiocarbon dating, researchers hope to be able to analyze small pieces of organic material that could have been trapped in the sediment by the foot of whoever left the prints, according to the statement.
—Ice age children frolicked in ‘giant sloth puddles’ 11,000 years ago, footprints reveal
—Prehistoric desert footprints are earliest evidence for humans on Arabian Peninsula
—10,000-year-old footprints show journey of squirmy toddler and caregiver
“We have long wondered whether other sites like White Sands were out there and whether GPR would be effective for imaging footprints at other locations,” Thomas Urban, an archaeologist at Cornell University who developed the GPR survey technique used at White Sands and more recently at the Hill Air Force Base, said in a statement (opens in new tab). “The answer to both questions is yes.”
The researchers say that these types of discoveries are important because they are direct evidence of human settlement in the area and are much more visceral than other nearby archaeological discoveries. “There is an immediate human connection to seeing human footprints,” Duke said. “To see them from a distant past, especially so much different than it looks today, can be impactful.”
Originally published on Live Science.
Harry is a U.K.-based staff writer at Live Science. He studied Marine Biology at the University of Exeter (Penryn campus) and after graduating started his own blog site “Marine Madness,” which he continues to run with other ocean enthusiasts. He is also interested in evolution, climate change, robots, space exploration, environmental conservation and anything that’s been fossilized. When not at work he can be found watching sci-fi films, playing old Pokemon games or running (probably slower than he’d like).
Stay up to date on the latest science news by signing up for our Essentials newsletter.
Thank you for signing up to Live Science. You will receive a verification email shortly.
There was a problem. Please refresh the page and try again.
Live Science is part of Future US Inc, an international media group and leading digital publisher. Visit our corporate site (opens in new tab).
© Future US, Inc. Full 7th Floor, 130 West 42nd Street, New York, NY 10036.
Firecracker Entertainment Sparks Opportunity for Independent Creatives – Times Square Chronicles
Facebook
Twitter
Google+
YouTube
LinkedIn
RSS
New production house offers space for creatives to collaborate, explore, and expand their art –
FORKS, WA – August 3, 2022 – Independent author M.B. Thurman, creator of The Summoned Series of books, today announced the formation of Firecracker Entertainment in partnership with actress Samantha Rose Baldwin. Projects will span from book publication to music production to immersive theatre experiences and beyond.
A full-service media house, Firecracker Ent. has three projects scheduled for 2022, with the Summoned Audiobook slated as its first release. Featuring a diverse ensemble cast, the audiobook stars Samantha Rose Baldwin as heroine Hadley Weston and Mateus Ward as romantic counterpart Fitz MacGregor.
“From the beginning, I envisioned Summoned as a fully immersive experience for the reader. From print to audio to visuals, I wanted readers to enjoy an elevated experience in the Summoned universe. But I struggled to find partners who could help bring this vision to life, which made me realize there was an industry gap when it comes to supporting independent creators,” said M.B. Thurman, Executive, Firecracker Ent. “In response to that need, Firecracker Ent. provides space for creatives to collaborate, explore, and expand their art.”
Five projects are slated for production in 2023, including original music inspired by The Summoned Series;
the Summoned: Immersive Experience; and publication of Crossed, Book II of The Summoned Series. Firecracker Ent. will collaborate with artists creating works in the Summoned universe, as well as those who have been previously hindered by the business of artistic industries.
“It’s important to foster safe spaces for artists where there are no rules and no boundaries, only resources,” said Samantha Rose Baldwin, Producer, Firecracker Ent. “Working with M.B. to build the world of Summoned has been so freeing, because we’ve been able to craft an environment that allows for creativity without the limitations that might impede our process. We look forward to offering artists those same opportunities through Firecracker Ent.”
Independent author M.B. Thurman has been building the world of Summoned since publishing the first book in the series in December 2020. Thurman’s initial effort in creating an immersive Summoned world was
the Summoned Audiobook, where she’s making her directorial debut. Under Firecracker Ent., Thurman is set to publish her second novel, Crossed, in early 2023.
Actress Samantha Rose Baldwin hails from upstate New York State and is best known for her work on Netflix’s Cobra Kai and the 2019 Justin Ward film, Relish. Baldwin is set to make her television debut on one of HBO Max’s hottest shows in late 2022. Baldwin stars in and co-produced the Summoned Audiobook and will take on the same roles for the Summoned Book Trailer, a short film based on the novel, which is slated to begin production under Firecracker Ent. in 2022.
Hadley Weston reunites with her secret love interest, Fitz MacGregor, in Paris, defying orders from governing officials that they remain apart. When they are mysteriously followed, Fitz must reveal an unbelievable truth: he’s a witch, and so is Hadley. While she cultivates her newfound power, Hadley partners with Fitz to solve a family mystery originating during seventeenth century witch trials in Scotland. When evidence leads them to a witch raising an army in a foreign world, Hadley and Fitz are forced to make a crucial decision: align themselves with a government they distrust or allow this foreign power to utilize Fitz’s ancestral magic to destroy peace with humankind.
For more information about Firecracker Ent. and upcoming projects, please visit firecrackerentertainment.com.
Suzanna, co-owns and publishes the newspaper Times Square Chronicles or T2C. At one point a working actress, she has performed in numerous productions in film, TV, cabaret, opera and theatre. She has performed at The New Orleans Jazz festival, The United Nations and Carnegie Hall. She has a screenplay and a TV show in the works, which she developed with her mentor and friend the late Arthur Herzog. She is a proud member of the Drama Desk and the Outer Critics Circle and was a nominator. Email: [email protected]
T2C is the go to place for the best-kept secrets and latest up-dates for the tourist but for Hell’s Kitchen, Clinton and Times Square this is their neighborhood. Times Square may be the tourist hotspot of North America, but New York residents are the community members who live and breathe city life and make dedicated readers.
Copyright © 2014 Times Square Chronicles
Army Corps releases final Alvin R. Bush Dam Master Plan – US Army Corps of Engineers – Baltimore District
The U.S. Army Corps of Engineers (USACE), Baltimore District, has released the new Alvin R. Bush Dam Master Plan (“2022 Master Plan”) and Finding of No Significant Impact (FONSI) that will serve as the guiding document for decision making at the lake for next 15 to 25 years.
This revision is a part of a larger, USACE-wide effort to bring all master plans up to date across the country.
The 2022 Master Plan will provide guidance for stewardship of natural resources and management for long-term public access to, and use of, the natural resources at Alvin R. Bush Dam, including the land classification of the USACE-managed lands.
Alvin R. Bush Dam, Clinton County, Pennsylvania.
The 2022 Master Plan reflects changes in land management classifications to align with current USACE regulations and guidance that have occurred since the 1964 original Master Plan was drafted. It also incorporates community input related to enhancements and opportunities at the project site. The draft plan was available for public comment from March 22 to April 20, 2022.
The 2022 Master Plan also refines land classifications to be consistent with authorized project purposes and current resource objectives. This includes a mix of natural resource and recreation management objectives compatible with recreation trends and regional goals established by stakeholders and USACE during the master planning revision process.
The 2022 Master Plan does not change the technical operations of the lake as related to its primary mission of flood risk management; it provides a management framework that balances the stewardship of natural resources and provision of high-quality recreation activities. It also provides a discussion of factors influencing resource management and development, including descriptions of existing development, and considerations of future development activities.
It is important to note that the 2022 Master Plan does not appropriate money to enhancements discussed in the plan, but effectively portrays where projects could be authorized if funding or a strategic partnership were to become available for implementation.
The final Master Plan, previous master plan and additional information can be found on the project website: https://www.nab.usace.army.mil/Missions/Dams-Recreation/Alvin-R-Bush/ARB-Master-Plan-Revision/
About Alvin R. Bush Dam
The Alvin R. Bush Dam project has prevented an estimated $293.8 million in flood damages for the local community since its construction was completed in 1962. Alvin R. Bush Dam is located in Clinton County on Kettle Creek, approximately 8.4 miles above the mouth of the creek and about 15 miles above Renovo, Pennsylvania. Alvin R. Bush Dam is an earth and rockfill dam structure. The project controls a drainage area of 226 square miles or about 92 percent of Kettle Creek. The project reduces flood heights of Kettle Creek below the dam and of the West Branch below the mouth of Kettle Creek. The recreational facilities are operated and maintained by the Department of Conservation and Natural Resources of the Commonwealth of Pennsylvania. These recreation facilities include an 1,800-acre park with a boat launch, picnic areas and campgrounds.
###
Baltimore District celebrates 175 years of Service to our Nation in 2022
Since the Nation’s fight for independence, the U.S. Army Corps of Engineers has played a vital role in developing our Nation. The Baltimore District has a long and storied history that extends as far back as the early 1800s when USACE constructed Fort McHenry, successfully shielding Baltimore against British attacks in the War of 1812. And when the threat of coastal attack diminished in the 1820s, Baltimore District turned its attention to developing roadways, railways, canals, and more, marking the beginning of the District’s Civil Works mission. Baltimore District delivers vital engineering solutions in collaboration with its partners to serve and strengthen the Nation, energize the economy, and reduce disaster risks. Baltimore District has an extensive flood risk management program, inspecting nearly 150 miles of levee systems and operating 16 dams, translating to the prevention of more than $16 billion of flood damages to date. The district maintains 290 miles of federal channels, including dredging the Baltimore Harbor, which material is beneficial mainly for restoration missions, such as the expansion of Poplar Island in the Chesapeake Bay. The district has vast ecosystem restoration missions that include restoring native oyster populations in the Bay. Baltimore District is the only district to operate a public utility — the Washington Aqueduct — that produces an average of 135 million gallons of drinking water per day at two treatment plants for approximately one million citizens living, working, or visiting the National Capital Region. The district also cleans up formerly used defense sites, decommissions and deactivates former nuclear power plants, and performs cleanup of low-level radioactive waste from the Nation’s early atomic weapons program. Baltimore District executes a robust military construction program and provides real estate services. These civil and military missions and diverse engineering services support communities and warfighters while addressing the ever-growing list of emerging national security requirements and ultimately protecting the Nation.
For more information, please visit www.nab.usace.army.mil/.
Release no. 22-018
Deliver vital engineering solutions, in collaboration with our partners, to secure our Nation, energize our economy, and reduce disaster risk.
The official public website of the Baltimore District, U.S. Army Corps of Engineers. For website corrections, write to [email protected].
Inside a TV news station determined to report facts in the Taliban's Afghanistan – Iowa Public Radio
KABUL, Afghanistan — Inside a cramped and windowless room at the headquarters of Afghanistan’s leading news channel, a group of young editors race against a six o’clock deadline.
One fiddles with the audio for a story on the year-long closure of girls’ secondary schools. Another tinkers with the images of Taliban officials at an international conference. They are stories that will be featured in that evening’s broadcast from TOLOnews.
When the Taliban returned to power last year, few expected Afghanistan’s first 24/7 news channel to survive. The first time the group was in power, in the 1990s, radios mostly carried Islamic programming and propaganda, and TVs were banned. After they were toppled in 2001, the Taliban spent the next couple of decades staging deadly attacks, often against journalists. In 2016, seven TOLO TV employees were killed by a Taliban suicide bomber.
Despite that history, the Taliban have let this democratic institution stand. But every day is a struggle for the journalists who still work there.
TOLOnews was barely in a position to cover the Taliban’s sudden takeover of the government last year.
“We lost more than 90% of our colleagues after the collapse of the government,” said Khpowlwak Sapai, the head of the network. Many TOLOnews reporters, producers, and editors were among the tens of thousands of Afghans who frantically fled the country within days of the fall of Kabul.
Sapai was only lucky in that he was able to hire new staff from the more than 200 media outlets that shut down soon after the return of the Taliban. Some closed under the pressure of draconian reporting restrictions, others ran out of funding amid the country’s economic collapse.
One of the young unemployed journalists Sapai hired was 23-year-old Toba Walizada, the network’s education reporter, who has spent the last year relentlessly covering the Taliban’s ban on middle and high schools for girls.
Over the last year, Walizada has produced hundreds of stories about the school closures, and the authorities don’t understand why she keeps covering the same story.
“The ministry of education always closes the door in my face,” Walizada said. “I’m always calling the deputy spokesman for the Islamic Emirate and he always tells me, ‘I have told you already, there is nothing new to say.'”
“I would like to continue my struggle here … if I leave, who will be the voice of Afghanistan?”
Her story that’s airing this evening is a fresh angle for her beat. An Afghan ulema – a group of Muslim scholars – has called for girls to be admitted to school.
This may not be the development the Taliban want to hear, yet the self-proclaimed Islamic Emirate could hardly complain about news coverage of Islamic scholars.
For the journalists who still work in Afghanistan, it’s not always clear where the red lines are. The Taliban’s media law simply warns against broadcasting anything that is “contrary to Islam” or involves national security.
Over the last year, there have been numerous accounts of raids, beatings, and detentions of Afghan journalists across the country who were pursuing stories the authorities did not like, according to the Committee to Protect Journalists.
None of this has stopped TOLOnews from broadcasting critical voices.
When the United Nations published a report blaming the Taliban for extrajudicial killings, TOLO programs analyzed and debated the findings.
When the Taliban ordered the network to stop playing popular foreign TV shows featuring women, and ordered TOLO not to explain why the shows disappeared, Sapai decided his news program owed it to viewers to tell them why some of the shows were disappearing. Both Sapai and the anchor who delivered that news were briefly arrested for defying Taliban orders.
In spring, the Taliban issued a decree instructing women, including on-camera journalists, to cover their faces in public. The network’s female journalists decided they would abide by the order by wearing COVID face masks so they could keep working — and in an act of solidarity, their male colleagues also wore masks on air.
And tonight, they are ready to go on air again.
With minutes to spare before the six o’clock broadcast, a TOLOnews anchor in a sharp navy suit and perfectly coiffed hair settles in behind a desk in the brightly lit studio.
A producer counts down and the broadcast begins. It is a woman who delivers the leading story about the Taliban’s participation in an international conference. TOLO’s audience may not see her face behind the mask, but they’ll hear her voice as she explains where the Taliban’s Afghanistan may be headed next.
Copyright 2022 NPR. To see more, visit https://www.npr.org.
Sequential process optimization for a digital light processing system to minimize trial and error | Scientific Reports – Nature.com
Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 13553 (2022)
123
Metrics details
In additive manufacturing, logical and efficient workflow optimization enables successful production and reduces cost and time. These attempts are essential for preventing fabrication problems from various causes. However, quantitative analysis and integrated management studies of fabrication issues using a digital light processing (DLP) system are insufficient. Therefore, an efficient optimization method is required to apply several materials and extend the application of the DLP system. This study proposes a sequential process optimization (SPO) to manage the initial adhesion, recoating, and exposure energy. The photopolymerization characteristics and viscosity of the photocurable resin were quantitatively analyzed through process conditions such as build plate speed, layer thickness, and exposure time. The ability of the proposed SPO was confirmed by fabricating an evaluation model using a biocompatible resin. Furthermore, the biocompatibility of the developed resin was verified through experiments. The existing DLP process requires several trials and errors in process optimization. Therefore, the fabrication results are different depending on the operator’s know-how. The use of the proposed SPO enables a systematic approach for optimizing the process conditions of a DLP system. As a result, the DLP system is expected to be more utilized.
Vat photopolymerization (VPP) is an additive manufacturing technology that can be used in various fields such as medicine, jewelry, and industry1,2,3,4. As it can be applied from the nanoscale to macroscale, the continuous demand and related research have increased5,6,7,8,9. Digital light processing (DLP), a VPP method, is an additive technology that uses a light source to photopolymerize a single layer of a three-dimensional (3D) structure by single exposure. The production speed is fast because it uses the digital mirror device (DMD) module of the beam projector to produce a pattern on a flat surface10. The DLP system uses a liquid photocurable resin, which is a synthetic organic material primarily composed of monomers, oligomers, photoinitiators, and additives. The photoinitiator receives the specific wavelength energy and is activated to generate a free radical to form a polymer bond with the monomer and oligomer11,12,13.
The liquid photocurable resins used may have different process conditions depending on the manufacturer, even if they are based on the same polymer; therefore, the identification of optimized process conditions for each resin is vital. The understanding of the material properties and curing conditions of newly developed resins is necessary to apply them to the DLP system. However, for many commercially available and developed resins, data are only provided on the curing thickness according to the exposure time of a specific wavelength. Therefore, unnecessary trials and errors are required for successful production. A logical and efficient workflow should be followed to reduce waste of resins and time and obtain high-quality products.
The VPP method is divided into bottom-up and top-down approaches according to the build plate and vat configuration, as shown in Fig. S114. In the bottom-up approach, the build plate rises from the bottom of the vat to perform the process, as shown in Fig. S1a. The bottom-up method is primarily used for projection types, such as DLP systems15,16. In the top-down approach, the process proceeds as the build plate descends from the top of the vat to the bottom, as shown in Fig. S1b. The top-down method is widely used in laser scanning types, such as stereolithography apparatus17,18.
Most DLP systems use the bottom-up approach to fabricate components upside down, which has three advantages. First, the bottom-up approach enables a more precise control of the layer thickness than the top-down approach19, such that high-precision parts can be manufactured20. Second, the bottom-up method does not require a re-coater for the recoating mechanism because the resin is automatically recoated between fabrication processes by the build plate movement21. Third, the bottom-up approach is more cost-effective than the top-down approach. The top-down approach requires a large amount of resin because the fabrication area is immersed in resin22. In the top-down method, photopolymerization is selectively performed on the top surface of the vat, as shown in Fig. S1b. The 3D structure is fabricated as the build plate descends toward the bottom of the vat. Therefore, the resin must be filled to the top surface of the vat, to where the focus of the light source is set. The height of the vat becomes the maximum height fabricated by the top-down approach, and the higher it is, the more resin is required. Conversely, the bottom-up approach selectively performs photopolymerization on the bottom surface of the vat, as shown in Fig. S1a. If the resin covers the fabrication area, the bottom-up method can be used with a small amount of resin. In addition, as the maximum build height is determined by the rise height of the build plate, there are low restrictions on the fabrication height. Therefore, the bottom-up method enables fabrication with a small amount of resin, and cleaning is easy23,24. Table S1 shows a comparison of the top-down and bottom-up approaches. However, some common problems can occur with these DLP systems based on the bottom-up approach, including poor initial adhesion, poor recovery of resins, and over-curing of overhang structures, as depicted in Fig. 1b–e. These three problems are examined in more detail as follows.
(a) Schematic diagram of DLP system. (b) Layer slip error due to poor build plate adhesion of the first layer. (c) Incomplete fabrication due to recoating error. (d) Shape distortion of the structure due to insufficient polymerization. (e) Over-curing due to excessive polymerization. (f) Chemical structure of isosorbide dimethacrylate (ISDM), the primary material of photocurable resin. (g) Chemical structure of poly(tetrameghylene ether) glycol-polyurethane acrylate (PTMG-PUA) as an additive material to improve the properties of phtocurable resins.
First, an initial fabrication failure problem may occur if the adhesion between the build plate and the first layer is weak. The DLP process proceeds with repeated up-and-down movements of the build plate. The build plate moves down for the curing of the layer and up to prepare for the curing of the next layer. In this process, the first layer is continuously affected by tensile force. Therefore, if the first layer has weak adhesion to the build plate, the 3D structure may detach during the DLP process, or layer alignment may be a problem owing to layer sliding, as shown in Fig. S2a. Conversely, additive manufacturing is possible if the adhesion between the build plate and the first layer is strong. However, an excessively strong adhesion of the first layer causes strong cross-linking of the polymer. This leads to shrinkage and deformation of the cured layer, as shown in Fig. S2b.
Second, poor recoating of the photocurable resin can occur. Resin recoating is required for additive manufacturing in bottom-up DLP systems before ultraviolet (UV) exposure. The resins on the vat are automatically arranged and coated when the z-stage is elevated using the bottom-up approach. The viscosity of the resin influences the recoating result at this stage. When using a DLP system, the viscosity of the photocurable resin is an important property that affects the production speed and shape distortion. In the recoating process for curing the next layer, the high-viscosity photocurable resin prevents smooth recoating and increases the time required for fabrication.
Third, in a DLP system, over-curing occurs when a light of excessive energy penetrates the resin to a depth greater than the thickness of the layer, as shown in Fig. S2e. The more transparent the resin, the greater the over-curing. As a result, the inside of the undercut structure, such as the microchannel, becomes blocked25. There are several methods to change the layer thickness and solve over-curing: UV intensity, exposure wavelength, exposure time, and resin26,27,28. The most convenient are to change the UV intensity and exposure time. However, the reduction of these parameters to improve over-curing causes low interlayer adhesion, and the strength of the product is lowered, or shape implementation is complicated. These three problems should be addressed for the stable fabrication of an open channel or undercut structure.
In most studies, only the curing thickness according to the exposure energy of the photocurable resin was verified, and manufacturing has been attempted29,30. However, it is not easy to achieve successful production under these conditions. Furthermore, although many studies suggest a solution by focusing only on the specific problem23,25,31, such as cure depth, studies on the integrated management of the three representative problems are scarce. Logical and efficient optimization can reduce the possibility of failure, increase the yield of the process, and reduce processing time and cost. The existing DLP system often depends on the experience and expertise of skilled workers, and requires several trials and errors in process optimization.
Therefore, a sequential process optimization (SPO) for application to a DLP system is proposed in this study. The SPO was systematized to minimize trial and error, considering the three problems previously described. A 3D microstructure was fabricated using the process conditions derived from this, and the biocompatibility of the developed resin was confirmed through cell culture. A systematic approach for optimizing the process conditions of DLP printing was possible when using the SPO proposed in this study. Thus, the application range of the DLP system was increased by reducing the risk of process failure and waste of resources and time.
Figure 1a illustrates the schematics of the developed DLP system32. The DLP system used a 6.6 W optical powered 405-nm near-UV LED (CBT39, Luminus), full-HD (1920 × 1080) DMD module (DLPLCR6500EVM, Texas Instruments), and a 100-mm focal length infinity-corrected objective lens (2 × EO M Plan Apo, Edmund Optics). The optical system used an enhanced aluminum-coated reflection mirror (#63-171, Edmund Optics) and a 100-mm focal length achromatic doublet lens (AC254–100, Thorlabs) to handle the optical path and improve imaging such as spherical aberration. The width of a single mirror of a DMD module is 7.56 μm. The field of view for the developed DLP system is 14.52 × 8.16 mm2. A five-phase stepper motorized Z-stage (ZCVL630, Misumi) with a 1-μm resolution and 30-mm stroke was used for precision additive manufacturing. An auto-leveling build plate with a ball-head joint was used. The glass build plate reduced the reflection and scattering of light from the UV lamp. The DLP system developed used the bottom-up method, as it is advantageous for producing microstructures, uses a small amount of resin, and is easy to clean.
In the bottom-up method, the polymerized resin may adhere to the vat surface owing to the excessive separation force. This problem can be solved by coating the vat with polydimethylsiloxane (PDMS), as depicted in Fig. 1a, because the porous structure of PDMS creates an oxygen inhibition layer that supplies oxygen between the PDMS window and the interface of the resin to inhibit radical polymerization. Therefore, the vat was coated with PDMS to reduce the release force between the cured resin and the vat5.
All chemicals used in this study were as follows: isosorbide (1,4:3,6-dianhydro-D-sorbitol, 98%), methacrylate anhydride (94%), ethyl 4-N,N-dimethylaminobenzoate (EDMAB), tetrahydrofuran (THF, anhydrous, 99.9%), and magnesium sulfate (MgSO4, 99.5%) were purchased from Sigma-Aldrich. Triethylamine (TEA) and 4,4-dimethylaminopyridine (DMAP) were purchased from Daejung for isosobide dimethacrylate (ISDM). Poly(tetramethylene ether)glycol (PTMG, average Mn 1000 g/mol), isophorone diisocyanate (IPDI, 98%), and diphenyl (2,4,6-trimethylbenzoyl)phosphine oxide (TPO, Shinyoun Rad Chem Ltd.) were also purchased from Aldrich, Korea, for the synthesis of PTMG-based urethane acrylate. ISDM (Fig. 1f) was synthesized as shown in Fig. S433.
The entire reaction proceeded in four steps by adding the reactants sequentially. In the first step, as shown in Fig. 2a, IPDI (14 mmol, 1 equivalents) and 0.01 g of DBTDL were placed in a three-necked flask under a nitrogen atmosphere and reacted at 60 °C for 10 min. A Fourier transform infrared (FT-IR) spectrometer was employed to confirm the functional groups of the target urethane acrylate. FT-IR spectroscopy was performed using a Thermo Scientific Nicolet™ 6700 spectrometer in the attenuated total reflection infrared mode. The analysis was conducted within the frequency range of 4000–400 cm−1 by co-adding 32 scans at a resolution of 2 cm−1.
(a) Reaction scheme for PTMG-based PUA. (b) Square and spring symbols represent IPDI and PTMG (or HEMA), respectively, (c) PT–PT PUA structure of the final step and (d) FT-IR spectra of PTMG PUA.
PTMG (28 mmol, 2 equivalent) was added to IPDI with a tin catalyst and continuously stirred at 60 °C until the NCO functional peak (2270 cm−1) from FT-IR disappeared to obtain the PTMG-IPDI-PTMG structure with C=C (1640 cm−1) and C=O (1600 cm−1) functional groups in methacrylate. In step 2, as shown in Fig. 2b, IPDI (28 mmol, 2 equivalents) was added again to the PTMG-IPDI-PTMG structure and continuously stirred under nitrogen at 60 °C for 10 min until the OH peak (3360 cm−1) from FT-IR disappeared to obtain the IPDI-PTMG-IPDI-PTMG-IPDI structure. In step 3, 3.8262 g (29.4 mmol, 2.1 equivalents) of HEMA was added to the result compound in step 2, as shown in Fig. 2c. The final reaction proceeded at 40 °C until the NCO functional peak (2270 cm−1) disappeared from FT-IR, as shown in Fig. 2d, to obtain the target PTMG PUA with the HEMA-IPDI-PTMG-IPDI-PTMG-IPDI-HEMA structure.
Isosorbide obtained by hydrogenation of glucose followed by dehydration of sorbitol has attracted considerable attention because of its rigidity and transparency34,35,36 as an alternative to bisphenol-A, an environmental hormone that is harmful to the human body37. Isosorbide is a renewable and non-toxic substance with good optical properties. However, owing to the brittleness of ISDM, there is a limit to additive manufacturing; thus, it was used in combination with other materials because it is colorless and transparent. PTMG is a material with excellent strength and abrasion resistance38. PUA has a high abrasion resistance and optical properties39,40. Thus, a blend of PTMG PUA and ISDM, as shown in Fig. 1f,g, may compensate for the limitation of isosorbide and enhance flexibility, which is the advantage of PTMG PUA. Accordingly, the effect of the weight ratio shown in Table S2 (0:10/2:8/8:2/10:0, w/w) between ISDM and PTMG PUA on tensile strength, elongation, light transmittance, and curing speed was investigated. As shown in Fig. S5, tensile strength and elongation were measured according to the ratio of ISDM and PUA (conditions 1, 2, 3 in Table S2). As shown in Figs. S6 and S7, light transmittance and curing speed were measured according to the ratio of ISDM and PUA (conditions, 2, 3, 4 in Table S2).
The SPO proposed in this study follows the workflow shown in Fig. 3. The first sequence of SPO is a single-layer test. The first sequence secures a dataset on the curing thickness of the resin according to the exposure energy, which is the most basic in the VPP method. During the process, the standard exposure energy required for the process is identified. The curing thickness of the resin according to the exposure energy has a significant impact on the fabrication of complex 3D microstructures. An undesired structure may be created if the cured thickness is too large or smaller than the layer thickness.
SPO workflow: single layer test, resin recoating test, adhesion test, over-cure test.
The second sequence is the resin-recoating test. In micro-additive manufacturing, careful consideration should be given to the use of recoaters that cause microstructure breakage41. Therefore, natural automatic recoating of the resin is essential in a bottom-up DLP system that does not require a recoater. However, due to this, air bubbles generated in the processing area remain inside the final product and may deteriorate the physical properties or cause shape errors outside the product. Therefore, the appropriate resin viscosity and process speed should be determined to prevent air bubbles and incomplete resin filling during the recoating process.
In the third sequence, i.e., the first layer adhesion test, the adhesion condition of the first layer is confirmed. This section discusses the adhesion between the build plate and the first layer. If the adhesion between the build plate and the first layer is too weak, delamination problems may occur during the initial fabrication. Conversely, if adhesion is too strong, fabrication is possible, but the structure may crack or deform with time. In this study, the layer adhesion test is conducted according to the exposure time to confirm the optimal adhesion. Optimal adhesion is checked simply by fabricating a layered pattern over exposure time and raising the build plate to process speed.
In the final sequence, i.e., the over-cure test, the appropriate overlap between the layers must be confirmed to minimize over-curing. An adequate overlap between layers is required for balanced fabrication31. If the overlap level is too low, the durability of the structure decreases. Conversely, if the overlap level is excessive, an unintended shape is produced owing to the over-cure. This is one of the reasons why it is challenging to fabricate overhang structures using a DLP system. Photocurable resins are made nontransparent by adding light absorbers or dyes to prevent over-curing42. Because the resin is nontransparent, the light penetration depth is limited, reducing the probability of over-curing. However, the use of additives causes changes in the physical properties of the raw material and deterioration of transparency. Consequently, it is challenging to observe internal structures, such as microchannels, and optical applications are limited. In this study, to maintain the properties of the raw material, the optimal overlap condition was determined using the exposure energy without adding other additives.
The cured thickness of the resin due to the photopolymerization reaction can be calculated and predicted mathematically. When UV light hits the resin, some light is scattered or absorbed at the resin surface. According to the Beer–Lambert law, the intensity of light decreases exponentially. Equation (1) is the working curve equation, which is derived by arranging the exposure equation obtained through the Beer–Lambert law in terms of energy, where Cd is the maximum curing thickness, Dp is the penetration depth of light, Emax is the maximum exposure energy of the resin surface, and Ec is the critical energy at which the resin phase changes into a solid. As shown in Fig. 4a, the critical energy Ec is the minimum energy required to initiate photopolymerization. According to Eq. (1), the curing properties of resins depend on two parameters: exposure energy and penetration depth43,44. As the amount of energy input and penetration depth increase, the cured thickness of the resin increases.
(a) Photopolymerization ratio and critical exposure energy according to the exposure time. (b) Single-layer photopolymerization according to the exposure time. (c) Single-layer thickness measurement result for each resin.
Based on Eq. (2), the curing thickness of the resin can be predicted using the exposure time as a process variable, where t is the exposure time, t0 is the critical time. As shown in Fig. 4b, the build plate was removed, and two types of newly developed resins were placed on the PDMS-coated vat. A square pattern of 2 × 2 mm2 was exposed to each resin with a light source with a wavelength of 405 nm from 1500 to 4500 ms at intervals of 500 ms. According to Eq. (1), the depth of penetrated UV light is proportional to the exposure time, because the maximum exposure energy depends on the time integral of the irradiance. To evaluate the thickness of the cured single layer according to various exposure times of UV light, the cured single layer was separated from the vat, washed with isopropyl alcohol (IPA), and the cured thickness was measured using an optical microscope (MS-12Z-L1215).
The curing thickness according to the exposure time of the two types of resins is shown in Fig. 4c. The curing thickness is controlled by adding a specific dye, photoinitiator, or UV absorber to the photocurable resin. However, in this case, lowering the transparency of the raw material is disadvantageous. Thus, the exposure energy was used to maintain the transparency of the photocurable resin.
The critical energy Ec is obtained by multiplying the critical time t0 and the illuminance E41. Ec is difficult to observe experimentally. This is because, in theory, the curing thickness is zero at Ec. Therefore, prediction is a standard method for deriving Ec45. A tendency line was obtained from the measured curing thickness, and the corresponding x-intercept value was assumed to be t0. The average light penetration depth Dp was obtained by substituting the measured Cd, t0, and t values into Eq. (2). Consequently, the working curve equation of the resin was derived, as shown in Fig. 4c. Additional experiments were performed to verify the derived working curve equation, as shown in Fig. S8. The cured thickness is highly sensitive to exposure time with a large amount of ISDM. As shown in Fig. 4c, IP(2:8) had a considerably lower gradient than IP(8:2). This is because the photopolymerization levels of the ISDM and PTMG PUA differ according to the exposure energy. This result indicates that IP(8:2) enables a broader range of thickness control.
After one layer is fabricated in the DLP system, the build plate rises farther than the layer thickness in the z-axis direction, as shown in Fig. 5a. After the z-axis has stopped and a set delay time had passed, the build plate was lowered to the next layer position. In this process, resin settling behavior occurs. As such, the success of recoating is determined by the photocurable resin viscosity and the build plate speed.
Behavior of (a) low-viscosity resin and (b) high-viscosity resin according to the movement of the build plate in the z-axis direction. (c,d) Photopolymerization and non-breaking resin interface of low-viscosity resin. (e) Samples without internal bubbles and shape errors due to stable recoating. (f g) Photopolymerization and breaking resin interface of high-viscosity resin. (h) Sample shape error due to poor recoating.
In a DLP system, the viscosity of the photocurable resin is an essential parameter46,47. The higher the viscosity of the resin, the more time is required for recoating, and the possibility of air bubbles in the fabrication area increases, as depicted in Fig. 5b.
The vat coated with PDMS was located above the optical system, and a glass build plate was mounted on the z-axis stage and positioned parallel to the vat (Fig. 1a). Assuming that the vat and the build plate are parallel, the photocurable resin flows between infinitely large plates with very narrow gaps. Therefore, the resin flow between the vat and build plate can be assumed to be a fully developed laminar flow without time disturbance48. The capillary force dominates the force acting on the two plates and the resin because the effect of gravity is negligible for liquids between the micro/nanogap. A large negative pressure is generated at the liquid interface between the two plates at micro/nano spacing, which functions as a large adhesion force between the two plates49,50.
The adhesion between the build plate and vat is a critical factor to consider for successful fabrication in a bottom-up DLP system. The initial condition setting considering the adhesive force was managed in the following sequence. The current sequence conformed to the recoating condition according to the behavior of the resin between the two plates.
The recoating process proceeded in the DLP system, as shown in Fig. 5a,b. Figure 5a illustrates the use of a resin with an appropriate viscosity, and Fig. 5b illustrates the use of a high-viscosity resin. The internal pressure of the resin between the vat and build plate is expressed by Eq. (3):
where T is the surface tension, r1 is the radius of the middle point between the vat and the build plate inside the resin, and r2 is the radius of curvature outside the resin. When the pressure inside the droplet is lower than the outside pressure (Δp < 0), the capillary adhesion pulls the two surfaces above and below. The generated capillary adhesive force is expressed by Eq. (4).
where V is the volume of the resin, θ is the contact angle, and h is the distance between the vat and the build plate. Assuming that the amount of evaporation of the resin is negligible, the numerator can be treated as a constant. Therefore, adhesion is most affected by the gap between the vat and build plate, and adhesion F decreases as the build plate rises51.
Assuming that the surface roughness of the vat and build plate is uniform when the build plate rises, the interface retreats in the radial direction of the build plate to maintain the resin volume and contact angle on the surface52,53, as depicted in Fig. 5a. The resin is recoated because of this flow, but the fingering effect and bubbles occur due to the instability of the interface depending on the viscosity of the resin54.
In a low-viscosity resin, the interface stability of resin-vat and resin-build plates is high because the flow rate Vr of the resin is greater than or equal to the rate of increase of the build plate speed Vs. Accordingly, the movement of the resin and the build plate has high synchronicity, as depicted in Fig. 5a. However, for a high-viscosity resin, because Vr is smaller than Vs, there is a mismatch in the resin movement for the build plate movement, causing the resin to separate, as depicted in Fig. 5b. This causes bubbles in the resin and fabrication failure.
Owing to the fast fabrication speed of the DLP system, the photocurable resin should behave flexibly between the vat and build plate. The resin flow between the two plates is an incompressible laminar flow, and the velocity distribution Vr of the resin is expressed by Eq. (5)55:
where z is the vertical distance from the vat, L is the x-direction length of the curing area, and μ is the viscosity of the resin. The maximum velocity Vmax occurs at point h/2, and is expressed by Eq. (6):
As previously mentioned, the flexibility of the resin flow during the rise and fall of the build plate is critical for effective recoating. Accordingly, a difference between the build plate speed Vs and the resin speed Vmax closer to 0 is optimal. When the build plate movement time is tb, the speed Vs can be expressed as h/tb. If this is summarized for time tb together with Eqs. (6), (7) is identical.
According to Eq. (7), the higher the viscosity of the resin, the more time is required for the build plate movement. Therefore, the use of a low-viscosity resin is advantageous for rapid manufacturing and stable recoating in a DLP system. The relationship between the build plate speed and viscosity also affects the build area, but it was not considered in this study because the maximum build area was as small as 13 × 7.5 mm2.
The manufacturability based on the difference in viscosity was confirmed through experiments using the low-viscosity IP(8:2) and high-viscosity IP(2:8) resins selected in this study. A 5 × 5 × 1 mm3 sample was fabricated with the DLP system, as shown in Fig. 5c,f under a layer thickness of 100 µm, z-lift distance of 1 mm, and z-lift speed of 100 mm/min. Because the purpose of this experiment was to confirm the effect of viscosity, the exposure time was set to 2500 ms such that the resin could be sufficiently photopolymerized. The time required for the one-layer process cycle under this condition was 5.9 s.
A distinct difference in resin behavior according to viscosity was confirmed when the build plate returned to its origin. The IP(8:2) resin maintained a mass on the vat without breaking the interface during the process, as shown in Fig. 5d. The sample in Fig. 5e was produced without internal bubbles or shape errors.
In contrast, in the IP(2:8) resin, as shown in Fig. 5g, the interface was broken on the vat and separated, causing air bubbles during the process, interfering with resin filling, and causing manufacturing defects, as shown in Fig. 5h. For high-viscosity IP(2:8) resin, the results can be improved if the z-lift speed is lowered and sufficient recoating time is considered. However, this requires a very long process time, which limits the fast manufacturing of the DLP system. Therefore, IP(2:8) resin was no longer considered in the subsequent sequence, and optimization was performed using IP(8:2) resin.
To reliably attach the first layer to the build plate, the adhesive force between the build plate and the first layer must be greater than the stress that occurs when the build plate is raised for the next layer. The force that occurs when two plates are separated between a viscous fluid is defined as the Stefan adhesion in Eq. (8)56,57:
where R is the radius of the separating plates, h is the distance between the two plates, μ is the viscosity of the fluid, and dh/dt is the rate of separation. Equation (8) indicates that the force applied to the previous layer is linearly proportional to the separation speed as the build plate moves to the next layer. Previously, the relationship between the processing time and resin viscosity at a z-lift speed of 100 mm/min was confirmed through the resin-recoating test sequence. The z-lift speed of 100 mm/min was the same as that of Eq. (8).
To identify the adhesion condition of the first layer at a separation speed of 100 mm/min, 2 ml of IP(8:2) resin was placed into the vat, as depicted in Fig. 6a, and the build plate was set at the starting position. Figure 6b illustrates that a 2 × 2 mm2 square image was generated as a 3 × 5 array. Each image was cured on the build plate by sequential exposure to 405 nm light from 1600 to 3000 ms at 100 ms intervals. After the process was completed, the build plate was raised at a separation speed of 100 mm/min. The cured pattern on the build plate shown in Fig. 6c was washed with IPA, and a distinct pattern was observed, as shown in Fig. 6d.
(a) Schematic diagram for the first layer adhesion test. (b) 3 × 5 square image pattern for adhesion test according to the exposure time. (c) First layer fabrication according to the exposure time. (d) After cleaning the build plate, the exposure time was confirmed to be suitable for first layer adhesion. (e) Failure to build plate adhesion due to insufficient exposure time. Misalignment of each layer is observed. (f) Sample fabricated by applying the optimal first layer exposure time. (g) First layer with excessive exposure time applied, causing dimensional accuracy failure and deformation due to step difference.
The pattern not attached to the build plate and that remaining on the build plate are confirmed in Fig. 6d. Patterns that do not adhere to the build plate are due to insufficient adhesion to resist the stresses caused by the separation speed. A stable adherence to the build plate was achieved from the tenth pattern, indicating that the first layer required 2500 ms or longer exposure time.
A 10 × 5 × 1 mm3 sample was prepared to confirm whether the first-layer exposure conditions were appropriate for the DLP system. Figure 6e illustrates the case of insufficient adhesion. The first layer applied the 2000 ms condition, and the remaining layers were fabricated with a layer height of 100 µm under the 1600 ms condition. In the working curve of the single-layer test, 2000 ms was a sufficient time for photopolymerization. However, the 2000 ms condition provided insufficient energy for build plate adhesion; thus, the process was terminated with the sample floating in the vat, as shown in the inset image of Fig. 6e. Samples were created as unaligned layers because when the initial layer adhesion failed, additional layer fabrication caused layer slip.
In Fig. 6f, 2500 ms derived through experimentation was applied as the optimal first-layer condition, and the remaining layers were fabricated with a layer height of 100 µm under the 1600 ms condition. The sample was fabricated in a state of adhesion to the build plate, as depicted in Fig. 6f. Each layer of the sample was aligned during fabrication. Finally, in Fig. 6g, the first layer condition was applied at 16,000 ms, ten times the process condition (recommended as the first layer conditions for commercial equipment).
The sample was adhered to a build plate during the fabrication. However, as shown in Fig. 6g, a step difference was observed between the first and subsequent layers, caused by over-curing owing to the excessive exposure time of the first layer. A step difference affects the dimensional accuracy and causes product deformation in the future. Therefore, confirming the first-layer adhesion condition using the method proposed in this sequence is helpful for successful fabrication. The optimized exposure time of the first layer adhesion for IP(8:2) was 2500 ms.
Fabricating overhang structures using the VPP method remains challenging, particularly when the top angle is almost parallel to the build plate. As shown in Fig. 7a, the resin trapped in the structure causes an additional photopolymerization reaction due to UV transmission, causing an over-curing problem58. As the size of the structure decreases, the inside is clogged, and a sizeable dimensional error occurs.
(a) Principle of over-cure in DLP system. (b) Lattice structure manufactured with 1400-ms exposure time. (c) Over-cured lattice structure manufactured with 2000-ms exposure time. (d) Measurement of over-cure of lattice structure overhang according to the exposure time.
IP(8:2) resin with a suitable viscosity for the DLP system was selected based on the resin recoating test. Furthermore, the first layer adhesion test performed in the third sequence confirmed that the initial exposure condition for stable attachment to the build plate was 2500 ms. Exposure time conditions were selected by referring to the working curve of the first sequence. The experiment was conducted with exposure time conditions set at 200-ms intervals from 1200 to 2000 ms. In the 2000-ms condition, up to five times the exposure energy can be produced compared with the laminate thickness.
A 3 × 3 × 3 mm3 lattice structure with a line width of 500 μm was fabricated under the conditions of a layer thickness of 100 μm, z-lift speed of 100 mm/min, and first-layer exposure time of 2500 ms. The fabricated lattice structure was washed with IPA and post-processed for 3 min in a UV oven with a wavelength of 405 nm. The thickness of the upper frame of the manufactured lattice structure was measured using an optical microscope (MS-12Z-L1215, SEIWA Optical), as shown in Fig. 7b,c.
The results for each condition are shown in Fig. 7d. Under the 1200-ms condition, as the exposure energy was insufficient to cause a photopolymerization reaction, the fabrication was unsuccessful. In contrast, at the 2.000-ms condition, over-curing of up to 1.6 times the design thickness of 500 μm occurred owing to excessive exposure energy. Therefore, the optimal exposure time was 1400 ms, 5% of the design thickness was overcured, and this value was the optimal overlap condition.
However, under these process conditions, despite reducing over-curing, the strength and durability of the structure immediately after fabrication were low because the bonding force between each layer was weak. Thus, post-processing in a UV oven after IPA cleaning was essential to improve the low strength and durability. UV curing also induced a complete reaction of the photoinitiator remaining on the structural surface. Therefore, UV curing improved strength and durability and reduced the biological toxicity.
The optimal process conditions for the developed resin were obtained through SPO, as previously described. The test artifact for confirming manufacturability was designed to evaluate whether the obtained conditions were suitable, as depicted in Fig. 8a. The test artifact was divided into eight sections from A to H to confirm manufacturability. Section A confirmed the manufacturability of the overhang structure according to the x–y aspect ratio, and Section B evaluated the fabrication precision according to the angle. The production of cylinders and square pillars according to the x–y aspect ratio was verified in Section C. Section D confirmed the implementation of the engraved pattern according to the width, and section E evaluated the manufacturing precision of the spherical shape. Section F evaluated the fabrication of the cone shape according to the angle, and section G confirmed the manufacturability of the cantilever beam according to the angle.
(a) Test artifact for verification of process conditions. (b) Conceptual diagram of three-step cleaning of DLP production sample. Test artifacts of (c) 100-μm layer and (d) 50-μm layer thickness conditions. (e) Dabo tower scaled down to 6/10,000. (f) Surface vertex centroid structure. (g) 3D microfluidic chip.
In the VPP method, cleaning after manufacturing is also important and must be carefully performed because damage may occur in microstructures during cleaning. The removal of the uncured resin remaining on the structure safely and accurately without damage was performed through a three-step cleaning process, as depicted in Fig. 8b. A well plate or sample bottle was prepared to contain the fabricated structure and IPA for washing. The first wash removed most of the resin on the surface, the second wash was performed by transferring the structure to an uncontaminated IPA, and the same method was used in the third wash to remove the uncured resin inside the structure.
Although vibration using ultrasonic waves facilitates cleaning, excessive vibrations can cause damage to the structure and require care. The structures cleaned in the third step were cured using UV light. Because the microstructure before post-UV curing is not durable, it may be damaged when wiping the IPA on the surface. Therefore, post-UV curing was performed with the microstructure immersed in IPA or deionized (DI) water to complete the final curing process without damage or distortion, as depicted in Fig. 8b.
Figure 8c shows a test artifact manufactured using the process conditions derived from the proposed SPO. A test artifact manufactured with a layer thickness of 100 µm was produced without problems in most areas. However, a low resolution was observed in slanted or curved structures (e.g., sections B, E, F, and G) owing to the high layer thickness. The resolution was improved by generating a test artifact with a layer thickness of 50 μm. Process conditions with a layer thickness of 50 µm were inferred from the first and last sequences. Figure 8d illustrates the manufactured test artifact, where the resolution of the slanted or curved structure was improved. The process conditions obtained by the SPO were suitable for fabricating a complex 3D structure, as depicted in Fig. 8e–g.
Additional experiments were conducted using a commercial photocurable resin to confirm whether the proposed SPO is universally applicable. Spot-HT-blue (Spot-A Materials, Barcelona, Spain) and OrmoComp (Micro-resist Technology GmbH, Germany) were used as commercial materials. OrmoComp lowered the viscosity by mixing with Ormothin (micro-resist technology GmbH, Germany) in a 3:1 ratio. The process conditions for both commercial materials were derived by applying the SPO, as shown in Table S3, confirming that both the developed and commercial resins could be successfully manufactured in the DLP system using SPO.
The scaffold was fabricated with the DLP system using three resins along with IP(8:2) as the development material. L-132 cells, which are normal lung cells, were cultured on a well plate with the three types of scaffolds. L-132 cells were seeded in 500 μL at a concentration of 5 × 104 cells/cm2. After culturing for 24 h, the sample was treated with 800 μL dimethyl sulfoxide (Sigma-Aldrich). A treatment with 20 μL of MTT (Sigma-Aldrich) was performed for 4 h. The absorbance was measured at 540 nm using a microplate reader (Asys UVM 340; Biochrom Ltd., Cambridge, UK) to confirm cell viability59,60.
A live/dead cell assay (BioVision, CA, USA) was used to observe cell adhesion and cytotoxicity in the developed materials. L-132 cells (5 × 104 cells/mL) were cultured in Spot- HT blue, IP(8:2), and OrmoComp for 3 days. In sequence, cells were treated with Live-Dye, a cell-permeable green fluorescent dye, and propidium iodide, a non-permeable red fluorescent dye. The cells were observed using a Nikon Eclipse TS100led Trinocular fluorescence microscope (Nikon Corporation, Tokyo) with a band-pass filter (detect fluorescein and rhodamine), as shown in Fig. 9b.
(a) L-132 cell viability results according to photopolymerization resin. (b) Cell observation results of the 3D scaffold of resins: Spot-HT blue, IP(8:2), OrmoComp.
The cell viability of the resin is shown in Fig. 9a. The cell culture images of Spot-HT, IP(8:2), and OrmoComp resin were produced using the DLP system. IP (8:2), an isosorbide-based resin, exhibited a high cell viability of 95.5%, confirming the biocompatibility of the developed resin. The values of OrmoComp and Spot-HT_blue were lower than those of IP(8:2). The environment for cell incubation of IP(8:2) was better than that of the other two structures. As shown in Fig. 9b, live and dead staining was performed to investigate the cell adhesion and cytotoxicity of the developed materials for 3D cell culture. The results indicated that the IP(8:2) materials increased cell adhesion compared to the Spot-HT blue and OrmoComp surfaces. In addition, living cells were observed in cells cultured in the pillars of the IP(8:2) scaffold. No dead cells were observed in the IP(8:2) scaffold. This suggests that IP(8:2) does not cause damage to cells, and the material is biocompatible. In contrast, the Spot-HT blue scaffold showed a few living cells, but almost no attached cells in pillars of the scaffold. Furthermore, the OrmoComp scaffold had dead cells. Our findings indicate that the developed IP(8:2) materials can be potentially used for 3D cell culture, regeneration, and drug screening in biomedical fields.
This study derived process conditions using the SPO for application in the DLP system of an isosorbide-based biocompatible photocurable resin. The three typical problems in the DLP system are (1) initial adhesion, (2) poor resin recoating, and (3) over-cure and incomplete curing caused by inappropriate exposure conditions. Prevention of the identified problems is essential for the successful use of the DLP system. SPO is constructed to minimize trial and error by considering the representative problems in advance.
In the first sequence, a dataset of the photopolymerized resin thickness according to the exposure energy was obtained. In the second sequence, the resin behavior during the recoating process according to the resin viscosity and build plate movement was analyzed mathematically. Moreover, the availability of the resin and the required time were determined. The low-viscosity resin has high manufacturability and is advantageous for rapid manufacturing. In the developed IP(8:2) resin, 5.9 s were required for a one-layer cycle when manufacturing at a build plate speed of 100 mm/min in the DLP system used in the experiment. In the third sequence, the adhesion conditions of the first layer to the build plate were quantitatively evaluated using a direct method. At a processing speed of 100 mm/min for the IP(8:2) resin, the appropriate first layer exposure time was 2500 ms. Appropriate first-layer adhesion conditions prevented excessive adhesion and deformation problems.
In the last sequence, the appropriate level of overlap conditions required for additive manufacturing was confirmed. At a processing thickness of 100 µm, the over-cure required a minimum exposure time of 1400 ms to fabricate a 500-µm thick overhang structure. Three-step cleaning and UV curing were used as post-processing methods to prevent damage to the fabricated structure and increase durability.
A test artifact was generated to evaluate the derived process conditions. Furthermore, the biocompatibility of the developed resin was confirmed through cell experiments, and the applicability of the SPO to commercial resins was guaranteed.
Logical and efficient optimization of workflows in the manufacturing field reduces the possibility of process failure and waste of time and money. In this study, an SPO applied to an overall DLP system was proposed. The proposed method reduces process failure in the DLP system, as well as the waste of resources and time, thereby increasing its range of applications. In the future, it is necessary to add a system that heats high-viscosity resin so that it does not affect the manufacturing speed of the DLP system. The advanced SPO considering the heating system, is expected to increase the possibility of using high-viscosity resin in the DLP system.
All data generated or analyzed during this study are included in this published article and its supplementary information files. The datasets used and/or analyzed during the current study are available from the corresponding author on reasonable request.
Ambrosi, A. & Pumera, M. 3D-printing technologies for electrochemical applications. Chem. Soc. Rev. 45, 2740–2755 (2016).
CAS PubMed Article Google Scholar
Camposeo, A., Persano, L., Farsari, M. & Pisignano, D. Additive manufacturing: Applications and directions in photonics and optoelectronics. Adv. Opt. Mater. 7, 1800419 (2019).
PubMed Article CAS Google Scholar
Moroni, L. et al. Biofabrication: A guide to technology and terminology. Trends Biotechnol. 36, 384–402 (2018).
CAS PubMed Article Google Scholar
Udofia, E. N. & Zhou, W. 3D printed optics with a soft and stretchable optical material. Addit. Manuf. 31, 100912 (2020).
Google Scholar
Gross, B., Lockwood, S. Y. & Spence, D. M. Recent advances in analytical chemistry by 3D printing. Anal. Chem. 89, 57–70 (2017).
CAS PubMed Article Google Scholar
Gul, J. Z. et al. 3D printing for soft robotics—a review. Sci. Technol. Adv. Mater. 19, 243–262 (2018).
CAS PubMed PubMed Central Article Google Scholar
Truby, R. L. & Lewis, J. A. Printing soft matter in three dimensions. Nature 540, 371–378 (2016).
ADS CAS PubMed Article Google Scholar
Vaezi, M., Seitz, H. & Yang, S. A review on 3D micro-additive manufacturing technologies. Int. J. Adv. Manuf. Technol. 67, 1721–1754 (2013).
Article Google Scholar
Choi, J. W. et al. A three-dimensional liquid-based exchangeable gradient osmosis chip for a permeability controllable microfluidic device. ACS Appl. Polym. Mater. 3, 5836–5844 (2021).
CAS Article Google Scholar
Lu, Y., Mapili, G., Suhali, G., Chen, S. & Roy, K. A digital micro-mirror device-based system for the microfabrication of complex, spatially patterned tissue engineering scaffolds. J. Biomed. Mater. Res. Part A: 77, 396–405 (2006).
Article CAS Google Scholar
Bagheri, A. & Jin, J. Photopolymerization in 3D printing. ACS Appl. Polymer Mater. 1, 593–611 (2019).
CAS Article Google Scholar
You, S., Wang, P., Schimelman, J., Hwang, H. H. & Chen, S. High-fidelity 3D printing using flashing photopolymerization. Addit. Manuf. 30, 100834 (2019).
CAS PubMed PubMed Central Google Scholar
Warr, C. et al. Biocompatible PEGDA resin for 3D printing. ACS Appl. Bio Mater. 3, 2239–2244 (2020).
CAS PubMed PubMed Central Article Google Scholar
Waheed, S. et al. 3D printed microfluidic devices: Enablers and barriers. Lab Chip 16, 1993–2013 (2016).
CAS PubMed Article Google Scholar
Bhattacharjee, N., Urrios, A., Kang, S. & Folch, A. The upcoming 3D-printing revolution in microfluidics. Lab Chip 16, 1720–1742 (2016).
CAS PubMed PubMed Central Article Google Scholar
Au, A. K., Huynh, W., Horowitz, L. F. & Folch, A. 3D-printed microfluidics. Angew. Chem. Int. Ed. 55, 3862–3881 (2016).
CAS Article Google Scholar
He, Y., Wu, Y., Fu, J. z., Gao, Q. & Qiu, J. J. Developments of 3D printing microfluidics and applications in chemistry and biology: A review. Electroanalysis 28, 1658–1678 (2016).
Smith, P. T. et al. Additive manufacturing of bovine serum albumin-based hydrogels and bioplastics. Biomacromol 21, 484–492 (2019).
ADS Article CAS Google Scholar
Santoliquido, O., Colombo, P. & Ortona, A. Additive Manufacturing of ceramic components by Digital Light Processing: A comparison between the “bottom-up” and the “top-down” approaches. J. Eur. Ceram. Soc. 39, 2140–2148 (2019).
CAS Article Google Scholar
Weems, A. C., Pérez-Madrigal, M. M., Arno, M. C. & Dove, A. P. 3D printing for the clinic: Examining contemporary polymeric biomaterials and their clinical utility. Biomacromol 21, 1037–1059 (2020).
CAS Article Google Scholar
Melchels, F. P., Feijen, J. & Grijpma, D. W. A review on stereolithography and its applications in biomedical engineering. Biomaterials 31, 6121–6130 (2010).
CAS PubMed Article Google Scholar
Hu, K., Wei, Y., Lu, Z., Wan, L. & Li, P. Design of a shaping system for stereolithography with high solid loading ceramic suspensions. 3D Print. Addit. Manuf. 5, 311–318 (2018).
Lian, Q., Yang, F., Xin, H. & Li, D. Oxygen-controlled bottom-up mask-projection stereolithography for ceramic 3D printing. Ceram. Int. 43, 14956–14961 (2017).
CAS Article Google Scholar
Behroodi, E., Latifi, H. & Najafi, F. A compact LED-based projection microstereolithography for producing 3D microstructures. Sci. Rep. 9, 1–14 (2019).
Article CAS Google Scholar
Wang, Z., Martin, N., Hini, D., Mills, B. & Kim, K. Rapid fabrication of multilayer microfluidic devices using the liquid crystal display-based stereolithography 3D printing system. 3D Print. Addit. Manuf. 4, 156–164 (2017).
Ahn, D., Stevens, L. M., Zhou, K. & Page, Z. A. Rapid high-resolution visible light 3D printing. ACS Cent. Sci. 6, 1555–1563 (2020).
CAS PubMed PubMed Central Article Google Scholar
Lee, J. H., Prud’Homme, R. K. & Aksay, I. A. Cure depth in photopolymerization: Experiments and theory. J. Mater. Res. 16, 3536–3544 (2001).
ADS CAS Article Google Scholar
Zheng, X. et al. Design and optimization of a light-emitting diode projection micro-stereolithography three-dimensional manufacturing system. Rev. Sci. Instrum. 83, 125001 (2012).
ADS PubMed Article CAS Google Scholar
Choong, Y. Y. C., Maleksaeedi, S., Eng, H., Su, P.-C. & Wei, J. Curing characteristics of shape memory polymers in 3D projection and laser stereolithography. Virtual Phys. Prototyping 12, 77–84 (2017).
Article Google Scholar
Aduba, D. C. Jr. et al. Vat photopolymerization 3D printing of acid-cleavable PEG-methacrylate networks for biomaterial applications. Mater. Today Commun. 19, 204–211 (2019).
CAS Article Google Scholar
Guerra, A. J. et al. Optimization of photocrosslinkable resin components and 3D printing process parameters. Acta Biomater. 97, 154–161 (2019).
CAS PubMed Article Google Scholar
Choi, J. W. et al. Optimization of the projection microstereolithography process for a photocurable biomass-based resin. 3D Print. Addit. Manuf. 8, 293–301 (2021).
Kim, S., Cho, J. K., Shin, S. & Kim, B.-J. Photo-curing behaviors of bio-based isosorbide dimethacrylate by irradiation of light-emitting diodes and the physical properties of its photo-cured materials. J. Appl. Polym. Sci. 132, 42726 (2015).
Article CAS Google Scholar
Wu, J. et al. Isohexide derivatives from renewable resources as chiral building blocks. Chemsuschem 4, 599–603 (2011).
ADS CAS PubMed Article Google Scholar
Rose, M. & Palkovits, R. Isosorbide as a renewable platform chemical for versatile applications—quo vadis?. Chemsuschem 5, 167–176 (2012).
CAS PubMed Article Google Scholar
Fenouillot, F., Rousseau, A., Colomines, G., Saint-Loup, R. & Pascault, J.-P. Polymers from renewable 1, 4: 3, 6-dianhydrohexitols (isosorbide, isomannide and isoidide): A review. Prog. Polym. Sci. 35, 578–622 (2010).
CAS Article Google Scholar
Han, D.-H., Kim, M.-J., Jun, E.-J. & Kim, J.-B. Salivary bisphenol-A levels due to dental sealant/resin: a case-control study in Korean children. J. Korean Med. Sci. 27, 1098–1104 (2012).
CAS PubMed PubMed Central Article Google Scholar
Du, Y., Zhang, J. & Zhou, C. Synthesis and properties of waterborne polyurethane-based PTMG and PDMS as soft segment. Polym. Bull. 73, 293–308 (2016).
CAS Article Google Scholar
Deng, Y., Zhou, C., Zhang, Q., Zhang, M. & Zhang, H. Structure and performance of waterborne polyurethane-acrylate composite emulsions for industrial coatings: Effect of preparation methods. Colloid Polym. Sci. 298, 139–149 (2020).
ADS CAS Article Google Scholar
Park, J. et al. Conformal phase masks made of polyurethane acrylate with optimized elastic modulus for 3D nanopatterning. J. Mater. Chem. C 2, 2316–2322 (2014).
CAS Article Google Scholar
Choi, J. W., Wicker, R. B., Cho, S. H., Ha, C. S. & Lee, S. H. Cure depth control for complex 3D microstructure fabrication in dynamic mask projection microstereolithography. Rapid Prototyping J. 15, 59–70 (2009).
Article Google Scholar
Urrios, A. et al. 3D-printing of transparent bio-microfluidic devices in PEG-DA. Lab. Chip 16, 2287–2294 (2016).
CAS PubMed PubMed Central Article Google Scholar
Ian Gibson, I. G. Additive manufacturing technologies 3D printing, rapid prototyping, and direct digital manufacturing. 498 (Springer, 2015).
Emami, M. M., Barazandeh, F. & Yaghmaie, F. Scanning-projection based stereolithography: Method and structure. Sens. Actuators, A 218, 116–124 (2014).
CAS Article Google Scholar
Jacobs, P. F. Rapid prototyping & manufacturing: fundamentals of stereolithography. (Society of Manufacturing Engineers, 1992).
Caprioli, M. et al. 3D-printed self-healing hydrogels via digital light processing. Nat. Commun. 12, 1–9 (2021).
Article CAS Google Scholar
Luo, Y., Le Fer, G. l., Dean, D. & Becker, M. L. 3D printing of poly (propylene fumarate) oligomers: Evaluation of resin viscosity, printing characteristics and mechanical properties. Biomacromolecules 20, 1699–1708 (2019).
Pang, D., Cong, H., Li, X., Li, H. & Gao, X. Liquid-bridge flow between two slender plates: Formation and fluid mechanics. Chem. Eng. Res. Des. 170, 304–313 (2021).
CAS Article Google Scholar
Men, Y., Zhang, X. & Wang, W. Capillary liquid bridges in atomic force microscopy: Formation, rupture, and hysteresis. J. Chem. Phys. 131, 184702 (2009).
ADS PubMed Article CAS Google Scholar
Ni, Q. & Crane, N. Controlling normal stiffness in droplet-based linear bearings. Micromachines 9, 525 (2018).
PubMed Central Article Google Scholar
Tadrist, L., Motte, L., Rahli, O. & Tadrist, L. Characterization of interface properties of fluids by evaporation of a capillary bridge. R. Soc. Open Sci. 6, 191608 (2019).
ADS CAS PubMed PubMed Central Article Google Scholar
Bowen, J. & Cheneler, D. Closed-form expressions for contact angle hysteresis: capillary bridges between parallel platens. Colloids Interfaces 4, 13 (2020).
CAS Article Google Scholar
Nguyen, H. N. G., Zhao, C.-F., Millet, O. & Selvadurai, A. Effects of surface roughness on liquid bridge capillarity and droplet wetting. Powder Technol. 378, 487–496 (2021).
CAS Article Google Scholar
Brulin, S., Roisman, I. V. & Tropea, C. Fingering instability of a viscous liquid bridge stretched by an accelerating substrate. J. Fluid Mech. 899 (2020).
Li, X., Mao, H., Pan, Y. & Chen, Y. Mask video projection-based stereolithography with continuous resin flow. J. Manuf. Sci. Eng. 141, 081007 (2019).
Article Google Scholar
Noel, A. C., Guo, H.-Y., Mandica, M. & Hu, D. L. Frogs use a viscoelastic tongue and non-Newtonian saliva to catch prey. J. R. Soc. Interface 14, 20160764 (2017).
PubMed PubMed Central Article Google Scholar
Ward, T. Capillary-pressure driven adhesion of rigid-planar surfaces. J. Colloid Interface Sci. 354, 816–824 (2011).
ADS CAS PubMed Article Google Scholar
Gong, H., Beauchamp, M., Perry, S., Woolley, A. T. & Nordin, G. P. Optical approach to resin formulation for 3D printed microfluidics. RSC Adv. 5, 106621–106632 (2015).
ADS CAS PubMed Article Google Scholar
Kim, G.-J., Lee, K.-J., Choi, J.-W. & An, J. H. Drug evaluation based on a multi-channel cell chip with a horizontal co-culture. Int. J. Mol. Sci. 22, 6997 (2021).
CAS PubMed PubMed Central Article Google Scholar
Nunewar, S. N. et al. Synthesis of 1-(Indol-2-yl)-phenoxazine hybrids from quinacetophenone precursors and their biological evaluation as DNA intercalating agents. J. Mol. Struct. 1217, 128311 (2020).
CAS Article Google Scholar
Download references
This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. 2022R1F1A1069152). This work was also supported by a Grant PEH21065 (Establishment of the Rapid Manufacturing Platform for Ceramic Additive Manufacturing) from Korea Institute of Industrial Technology (KITECH).
Advanced Joining and Additive Manufacturing R&D Department, Korea Institute of Industrial Technology, 113-58, Seohaean-ro, Siheung-si, 15014, Republic of Korea
Jae Won Choi & Cheol Woo Ha
Department of Mechanical Engineering, BK21 FOUR ERICA-ACE Center, Hanyang University, 55 Hanyangdaehak-ro, Ansan, 15588, Republic of Korea
Jae Won Choi & Sukjoon Hong
Department of Food and Nutrition, KC University, 47, 24-Gil, Kkachisan-ro, Seoul, 07661, Republic of Korea
Gyeong-Ji Kim & Jeung Hee An
Green Chemistry and Materials Group, Korea Institute of Industrial Technology, Daejeon, Chungcheongnam-do, 31056, Republic of Korea
Baek-Jin Kim
Department of Green Process and System Engineering, Korea University of Science and Technology (UST), Daejeon, Chungcheongnam-do, 31056, Republic of Korea
Baek-Jin Kim
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
J.W.C. designed, fabricated the micro 3D structure and wrote the main manuscript text and prepared figures. G.-J.K. performed a cell viability experiment. B.-J.K. synthesized a photopolymerizable resin. S.H. and J.H. performed the data analysis. C.W.H. supervised the project and wrote and reviewed the manuscript. All authors read and reviewed the manuscript.
Correspondence to Cheol Woo Ha.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Choi, J.W., Kim, GJ., Hong, S. et al. Sequential process optimization for a digital light processing system to minimize trial and error. Sci Rep 12, 13553 (2022). https://doi.org/10.1038/s41598-022-17841-5
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-17841-5
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Advanced search
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.
iZotope & Exponential Audio reverb sale – Gearnews
· Source:
Until the end of July, customers can save 80% on seven iZotope & Exponential Audio top-selling reverb plug-ins. The offers are available from iZotope and its dealers, such as our affiliate partner Thomann.
In 2019, the two companies joined forces with the Cambridge, MA-based iZotope acquiring the latter’s entire product line. At the time, Exponential Audio was a leader in digital reverb development with flagship products including R4, PhoenixVerb Surround, and Symphony.
They were mostly used in the film space and surround audio realms, and they are still a stronghold in the field. However, founder and reverb expert Michael Carnes joined iZotope as a Research Fellow to continue building products under the iZotope – now Soundwide – umbrella. In the meantime, existing Exponential Audio plug-ins get to keep their brand name with software and customer support handled by iZotope.
When it comes to Exponential reverbs, products like PhoenixVerb, NIMBUS, R2, and R4 are best suited towards music production with their intuitive controls and penchant for depth and shimmer.
Meanwhile, Excalibur offers several LFO-driven modulation effects to imaginitive sound designers.
Until the end of July, customers can save 80% on seven of iZotope and Exponential Audio’s top-selling reverb plug-ins. The following products are on sale:
Exponential Audio Phoenix Verb
Exponential Audio Phoenix Verb Download
Exponential Audio R2
Exponential Audio R2 Download
Exponential Audio R4
Exponential Audio R4 Download
Exponential Audio Stratus
Exponential Audio Stratus Download
Exponential Audio Symphony
Exponential Audio Symphony Download
Exponential Audio Nimbus
Exponential Audio Nimbus Download
iZotope Neoverb
iZotope Neoverb Download
By loading the video, you agree to YouTube’s privacy policy.
Learn more
Load video
By loading the video, you agree to YouTube’s privacy policy.
Learn more
Load video
* This article contains affiliate links to help us fund Gearnews. If you buy something through these links, we will receive a commission. Don’t worry, the price for you always stays the same. Thank you for your support!
How do you like this post?
Your email address will not be published.
· Not been to a synth exhibition since the British Music Fair at Wembley in 1988! My first one was at Olympia the year before. Tickets ordered and looking forward to Oct 8th 👍
· nice
· I owned the Iridium 2-part multi timbral, but returned it due to audio bugs and blank screen issues, twice. Then I took the Hydrasynth mono timbral, but the sound quality felt too cheapish VST like. …
Spotify separates music and podcast feeds in Home screen – Stuff Magazines
Spotify separates music and podcast feeds in Home screen Stuff Magazines
source
NEWS: Pixey Shares New Single 'I'm Just High' And Announces Mini-album 'Dreams, Pains And Paper Planes.' – God Is In The TV
Transcendent singer-songwriter and producer, Pixey, has shared ‘I’m Just High’, a sleek, edgy, groove-laden summer anthem, taken from forthcoming mini-album, ‘Dreams, Pains & Paper Planes,’ out on 30th September. ‘I’m Just High’ received its worldwide radio premiere on the Future Sounds show on BBC Radio 1 last night with Clara Amfo. ‘One of the UK’s shiniest new stars’ has created a summer anthem that combines a euphoric chorus and funk-laden riffs with her signature breakbeat samples to create another slice of 90s inspired dream-pop magic.
Pixey takes you through dreamy psychedelic wonderlands with sass, honesty and verve in her latest single. Speaking of the music video she said, “I remember having a clear concept of how I wanted the music video to be… I wanted the verses to feel claustrophobic and constrained, with the choruses breaking free into a fantastical and unrealistic world always coming back to reality.” She said that director, Dan Broadley, “took my concept and elevated it to a level I couldn’t have predicted & we shot on the hottest day on record, which was definitely a challenge!” Watch here:
‘I’m Just High’ follows previous mini-album teasers, ‘Recycled Paper Planes,’ and ‘Come Around (Sunny Day)’ .
Pixey said, ‘I’m Just High’ is a track I wrote, recorded and co-produced between time in the studio and my own bedroom. The track itself is a double entendre. I like to put my own experiences into my music and I feel like this song is probably one of my most honest songs to date. I hope people can find some comfort in the song, I always like to write upbeat, groovy beats to personal struggles I’m still figuring out.”
Her forthcoming mini-album, ‘Dreams, Pains & Paper Planes,’ will be Pixey’s first longer project since the shimmering ‘Sunshine State ‘ EP arrived in October 2021, which followed her celebrated early 2021 debut EP, ‘Free To Live In Colour ‘whose title track was crowned ‘Tune Of The Week’ by Jack Saunders on BBC Radio 1.
Just like Grimes, the majority of Pixey’s work was impressively written, recorded and produced by the artist herself in her bedroom, alongside a couple of studio tracks. In 2016, she suffered a near fatal viral illness which proved to be the catalyst for her musical awakening, Pixey said,
“When I thought I was going to die I thought of all the things I wish I’d done and music was the first thing I thought of. As soon as I started recovering I started learning to record and produce.” She taught herself Ableton production software before mastering guitar and eventually drums and bass after her previous (and current) boyfriend(s) left their instruments lying around to prove she could learn it quicker and play it better.
Once able to carve out her own sound, Pixey turned to The Verve, The Prodigy and De La Soul for sonic inspiration, adding, “I particularly like the idea of using samples/making my own riffs sound like samples which was heavily inspired by the De La Soul album ‘3 Feet High and Rising.’ Starting out initially though, Grimes was a huge catalyst when I realised she wrote, recorded & produced herself.” Her prolific and unusual song writing style stems from an original riff or beat, with further layers added as she records and produces, and lyrics being added last – the process taking only a day or two.
Speaking of her upcoming record, ‘Dreams, Pains & Paper Planes;’ Pixey said, “Genre-bending was something I wanted to experiment with, tailoring to the moods of each song but still keeping to the core big beat elements. I wanted to write a record that kept a sunny sound but was more anxious lyrically. More than anything, I want the listener to feel like they can dip into an alternate world for a while, whether it’s comforting or not”.
Pixey has just been confirmed to provide the official 22/23 season Premier League titles for BT Sport’s coverage, for every match throughout the entire season, with her cover of The Charlatans’ ‘One To Another,’ in collaboration with Mint Royale.
Earlier this year, she joined labelmate Alfie Templeman on his spring headline tour of sold-out venues across the country, including an enthralling night at London’s Shepherds Bush Empire. Pixey has just kicked off a summer of festivals including Truck, Tramlines, Y Not, and more.
‘Dreams, Pains & Paper Planes‘ is out on 30th September on Chess Club Records. Pre-order Dreams, Pains & Paper Planes HERE
See Pixey live in 2022:
July
30th – Y Not? Festival, Derbyshire
August
6th – Bingley Weekender, Bingley
14th – 110 Above Festival, Leicester
September
10th – Confessional Music And Arts Festival, Blackburn
I consent to the terms and conditions
This site uses Akismet to reduce spam. Learn how your comment data is processed.
God is in the TV is an online music and culture fanzine founded in Cardiff by the editor Bill Cummings in 2003. GIITTV Bill has developed the site with the aid of a team of sub-editors and writers from across Britain, covering a wide range of music from unsigned and independent artists to major releases.
I consent to the terms and conditions
Pritzker's national strategy- POLITICO – POLITICO
Shia Kapos' must-read rundown of political news in the Land of Lincoln
Get the Illinois Playbook newsletter
By signing up you agree to receive email newsletters or updates from POLITICO and you agree to our privacy policy and terms of service. You can unsubscribe at any time and you can contact us here. This sign-up form is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
By SHIA KAPOS
Good Wednesday morning, Illinois. The heat has dipped, and all seems right in the world.
Illinois Gov. JB Pritzker has donated $2 million to the Democratic Governors Association to help Democrats in effort to preserve abortion rights. | Ashlee Rezin/Chicago Sun-Times via AP
Gov. JB Pritzker has donated $2 million to the Democratic Governors Association as part of a strategy to help Democrats across the country win governors’ races in November.
The goal is to elect Democrat governors who can be a firewall against new abortion restrictions pushed by conservative legislatures. Part of the effort is identifying states where a Democratic governor can veto anti-abortion legislation pushed by a conservative legislature.
“I’m just doubling-down my support for pro-choice candidates, particularly governors who will have an enormous impact on the future of women’s reproductive rights until we can pass a federal law guaranteeing those rights,” Pritzker told your Playbook host.","link":{"target":"NEW","attributes":[],"url":"https://www.politico.com/news/2022/08/09/pritzker-uses-terrible-desantis-as-foil-in-national-campaign-on-abortion-rights-00050583","_id":"00000182-89ae-d71e-abeb-cffe4a460000","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a460001","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>Pritzker told your Playbook host.
He’s donated “hundreds of thousands” of dollars to governor candidates across the country and is waiting for the Democratic primary to wrap up in Florida before wading into that race, too.
Republican Ron DeSantis “is a terrible anti-choice governor,” Pritzker said in an interview, adding that Florida is among “the places where I’m trying to make a difference.”
Billionaire replay: Pritzker funding a Florida race could become a repeat of the political battle he faced against hedge fund exec Ken Griffin in Illinois. Griffin has since moved to the Sunshine State and is a strong supporter of DeSantis.
— Pritzker uses ‘terrible’ DeSantis as foil in national campaign on abortion rights,","link":{"target":"NEW","attributes":[],"url":"https://www.politico.com/news/2022/08/09/pritzker-uses-terrible-desantis-as-foil-in-national-campaign-on-abortion-rights-00050583","_id":"00000182-89ae-d71e-abeb-cffe4a460002","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a460003","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>Pritzker uses ‘terrible’ DeSantis as foil in national campaign on abortion rights, from POLITICO’s home page
— The Ken Griffin interview:","link":{"target":"NEW","attributes":[],"url":"https://www.chicagotribune.com/opinion/commentary/ct-opinion-ken-griffin-illinois-pension-jb-pritzker-desantis-20220809-jnrzlzbpvbfcnjauz522qcvi4m-story.html","_id":"00000182-89ae-d71e-abeb-cffe4a460004","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a460005","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>The Ken Griffin interview: “If Ron (DeSantis) decides to run for president (I’m pretty confident), I’m gonna be a big supporter of his,” Griffin told Tribune’s Chris Jones.
Tyler Meredith, left, plays Leone Baxter and Yuriy Sardarov is Clem Whitaker in TimeLine Theatre’s world premiere of Campaigns, Inc. | Joe Mazza/brave lux inc
“Fake news,” campaign consulting and political intrigue take center stage in Campaigns, Inc., premiering on TimeLine Theatre’s stage","link":{"target":"NEW","attributes":[],"url":"https://timelinetheatre.com/events/campaigns-inc/","_id":"00000182-89ae-d71e-abeb-cffe4a490000","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a490001","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>TimeLine Theatre’s stage Thursday and running through Sept. 18.
It’s a comedy about the 1934 California governor’s race between Democrat Upton Sinclair, who wrote about Chicago’s meat-packing industry in “The Jungle,” and conservative Republican Frank Merriam.
True story: Sinclair’s campaign slogan was “end poverty in California,” and he called for ending the sales tax and instituting an income tax on anyone earning more than $50,000 a year — a lot during the Depression. He won the Democratic nomination by more votes than any primary candidate in California had ever won before. Republicans were appalled.
The play’s title, Campaigns, Inc., takes its name from the political consulting firm created by the husband-wife team of Clem Whitaker and Leone Baxter. It’s believed to be the first-ever political consulting firm.
Campaigns, Inc. was hired to destroy Sinclair by using words and dialogue from his many books against him, including a tale about Sinclair’s failed divorce, titled “How I Got Licked.”
It worked. Sinclair lost and the political consulting industry was born. Playbook talked to playwright Will Allen about the production:
How did you come to tell this story? “A filmmaker buddy sent me an article from the New Yorker in 2012, called “The Lie Factory”","link":{"target":"NEW","attributes":[],"url":"https://www.newyorker.com/magazine/2012/09/24/the-lie-factory","_id":"00000182-89ae-d71e-abeb-cffe4a490002","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a490003","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>“The Lie Factory” with a note saying it could be a good play. I was immediately fascinated. I had never heard of Baxter and Whitaker.”
Their work seems a lot like what we see in political ads today: “They were the first people to develop a scheme of a mass media assault of misinformation. That issue remains huge today. It’s shocking that in 88 years, we haven’t learned anything. While the methods of a media attack have evolved, the messages and ideas and the way we manipulate voters is still virtually the same.”
How did you write the play? “I spent the first year or so researching all the different players in this story from Upton Sinclair and Frank Merrion, to Charlie Chaplin, William Randolph Hearst, a lot of athletes and movie stars and FDR in the White House.”
Do you follow politics? “I would call myself a political junkie. A lot of people tell me I should run for office, and it’s something I have thought about. But my wife isn’t interested in that. So for now, I’ll stick to writing about politicians.”
Have a news tip, suggestion, birthday, anniversary, new job, or any other nugget for Playbook? I’d like to hear from you: [email protected]","link":{"target":"NEW","attributes":[],"url":"mailto:[email protected]","_id":"00000182-89ae-d71e-abeb-cffe4a490004","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a490005","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>[email protected]
STEP INSIDE THE WEST WING: What’s really happening in West Wing offices? Find out who’s up, who’s down, and who really has the president’s ear in our West Wing Playbook newsletter, the insider’s guide to the Biden White House and Cabinet. For buzzy nuggets and details that you won’t find anywhere else, subscribe today.
At Lion Electric’s Joliet Manufacturing Facility in Channahon at 11:15 a.m. to celebrate clean manufacturing investments","link":{"target":"NEW","attributes":[],"url":"https://www.illinois.gov/about/live-video.html","_id":"00000182-89ae-d71e-abeb-cffe4a4c0000","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a4c0001","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>to celebrate clean manufacturing investments … At the Dairy Building in Springfield at 3 p.m. for the unveiling","link":{"target":"NEW","attributes":[],"url":"https://www.illinois.gov/about/live-video.html","_id":"00000182-89ae-d71e-abeb-cffe4a4c0002","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a4c0003","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>or the unveiling of the Illinois State Fair Butter Cow.
At the Chicago Cultural Center at 10 a.m. to release the City’s 2023 Budget Forecast.
No official public events.
— Pritzker says Illinois will benefit from CHIPS & Science Act:","link":{"target":"NEW","attributes":[],"url":"https://www.kfvs12.com/2022/08/09/illinois-governor-says-his-state-expected-benefit-chips-science-act/","_id":"00000182-89ae-d71e-abeb-cffe4a4f0001","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a4f0002","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>Pritzker says Illinois will benefit from CHIPS & Science Act: The governor was on hand in Washington for President Joe Biden signing into law the innovation and economic competitiveness legislation that authorizes tens of billions in new research and development spending at the Department of Energy and National Science Foundation. “We have a lot of manufacturing,” said Pritzker. “We’re in the heart of what use to be called the Rust Belt, now the Innovation Belt, and our manufacturers use semiconductors in virtually everything that they do, and it’s been very hard to obtain those chips when they needed it.” via KFVS 12 …
… Biden signs CHIPS and Science bill, boosting semiconductor production,","link":{"target":"NEW","attributes":[],"url":"https://www.politico.com/video/2022/08/09/biden-signs-chips-and-science-bill-supporting-semiconductor-production-and-research-658468","_id":"00000182-89ae-d71e-abeb-cffe4a500000","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a500001","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>Biden signs CHIPS and Science bill, boosting semiconductor production, via POLITICO VIDEO
Alexi Giannoulias, the Democratic nominee for secretary of state, is pushing for legislation to protect abortion-care data that could be threatened by anti-abortion groups known to use license plate scanners to get information about patients.
He’s working with state Reps. Kelly Cassidy (D-14th) and Ann Williams (D-11th), who have pledged to sponsor the proposed legislation in Springfield.
“Illinois must enact protections to ensure the data is not used to target women seeking access to abortion services or employing it as a surveillance system to track them,” Giannoulias said in a statement.
What the legislation would do: Giannoulias wants to limit the purpose for which Automatic License Plate Readers (ALPRs) can be used, such as to locate drivers involved in serious crimes and stolen vehicles. Giannoulias also is calling for legislation that specifies ALPRs cannot be used to track individuals seeking abortion care or individuals assisting them and nor should information be shared with other states.
— Elizabeth Rochford has been endorsed by the Illinois Federation of Teachers in the race for the Illinois Supreme Court’s Second District.
— The People Who Play By The Rules PAC has launched a series of "Business Speaks" ads","link":{"target":"NEW","attributes":[],"url":"https://www.youtube.com/watch?v=9HwN2k2Bhp4","_id":"00000182-89ae-d71e-abeb-cffe4a520000","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a520001","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>“Business Speaks” ads featuring business folks. The latest has Tom Sodeika of Auxilium HCM criticizing Pritzker over Covid-19 mitigation policies, taxes and “big name businesses” moving out of Illinois.
— MAYOR’s RACE | Ald. Sophia King joins race to unseat Lightfoot:","link":{"target":"NEW","attributes":[],"url":"https://chicago.suntimes.com/2022/8/10/23298770/sophia-king-running-for-mayor-chicago-2023-election-lightfoot-obama-preckwinkle","_id":"00000182-89ae-d71e-abeb-cffe4a530002","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a530003","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>Ald. Sophia King joins race to unseat Lightfoot: “King is chair of the Chicago City Council’s Progressive Caucus. Her husband, Alan, an attorney and house music DJ, is a close friend and basketball-playing buddy of former President Barack Obama,” by Sun-Times’ Fran Spielman.
— Bill Conway makes it official: The Navy veteran and former prosecutor officially threw his hat in the ring for alderman of the 34th Ward. The newly shaped ward includes parts of Chicago’s Loop, West Loop, Greektown and Fulton River District areas. “My top priority is working closely with law enforcement and community partners to ensure public safety,” Conway said in a statement — a reminder that he was also a former candidate for Cook County state’s attorney.
— Foxx moves to drop charges in 8 murders tainted by former CPD detective Reynaldo Guevara:","link":{"target":"NEW","attributes":[],"url":"https://chicago.suntimes.com/crime/2022/8/9/23298481/foxx-drops-murder-charges-tainted-former-cpd-detective-reynaldo-guevara","_id":"00000182-89ae-d71e-abeb-cffe4a550000","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a550001","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>Foxx moves to drop charges in 8 murders tainted by former CPD detective Reynaldo Guevara: The cases from the 1980s and ’90s were dropped Tuesday — based on allegations of misconduct by the former Chicago Police detective, by Sun-Times’ Andy Grimm and Stefano Esposito.
— Foxx defends her tenure amid wave of staff losses in State’s Attorney’s Office:","link":{"target":"NEW","attributes":[],"url":"https://chicago.suntimes.com/2022/8/9/23298904/kim-foxx-defends-her-tenure-amid-wave-of-staff-losses-in-states-attorneys-office#:~:text=Foxx%20said%20the%20stress%20of,t%20fall%2C%E2%80%9D%20Foxx%20said.","_id":"00000182-89ae-d71e-abeb-cffe4a550004","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a550005","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>Foxx defends her tenure amid wave of staff losses in State’s Attorney’s Office: “Foxx points to national shortage of prosecutors during pandemic era’s ‘Great Resignation,’” by Sun-Times’ Andy Grimm.
Cannabis confusion: Knowing the difference between regulated weed stores and unregulated CBD shops:","link":{"target":"NEW","attributes":[],"url":"https://abc7chicago.com/sunnyside-dispensary-cbd-thc-near-me-river-north-chicago/12112671/","_id":"00000182-89ae-d71e-abeb-cffe4a560000","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a560001","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>Knowing the difference between regulated weed stores and unregulated CBD shops: “Regulated dispensaries like the River North Sunnyside store are not happy about new unregulated shops, a spokesperson said,” by ABC 7’s Jason Knowles
— Chicago police official overseeing court-ordered reforms is axed by top cop after questioning deep staff cuts:","link":{"target":"NEW","attributes":[],"url":"https://chicago.suntimes.com/crime/2022/8/9/23298886/chicago-police-official-overseeing-reforms-axed-by-top-cop-after-questioning-deep-staff-cuts","_id":"00000182-89ae-d71e-abeb-cffe4a570000","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a570001","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>Chicago police official overseeing court-ordered reforms is axed by top cop after questioning deep staff cuts: “Robert Boik, who has served in high-ranking civilian roles within the department since 2016, was dismissed after sending an email criticizing Supt. David Brown’s decision to move 46 officers to the Bureau of Patrol as part of a larger reorganization, according to sources,” by Sun-Times’ Tom Schuba and Fran Spielman.
— Lightfoot assures cops: ‘I will always have your back’:","link":{"target":"NEW","attributes":[],"url":"https://chicago.suntimes.com/city-hall/2022/8/9/23298560/lightfoot-chicago-police-officers-graduation-time-off-suicides-foot-chase-policy-crime-city-council","_id":"00000182-89ae-d71e-abeb-cffe4a570002","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a570003","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>Lightfoot assures cops: ‘I will always have your back’: “The mayor’s latest attempt to reclaim the police support that has abandoned her since her landslide victory in 2019 came during a graduation ceremony Tuesday in the ballroom at Navy Pier,” by Sun-Times’ Fran Spielman.
— NASCAR permit agreement reveals new details about race coming to Chicago,","link":{"target":"NEW","attributes":[],"url":"https://www.nbcchicago.com/investigations/nascar-permit-agreement-reveals-new-details-about-race-coming-to-chicago/2910896/","_id":"00000182-89ae-d71e-abeb-cffe4a570004","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a570005","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>NASCAR permit agreement reveals new details about race coming to Chicago, by NBC 5’s Mary Ann Ahern and Shelby Bremer
— Riot Fest management apologizes and its contractor steps down after ‘hostile’ community meeting:","link":{"target":"NEW","attributes":[],"url":"https://www.chicagotribune.com/news/breaking/ct-douglass-park-community-members-organize-against-music-festivals-20220810-d3w5gpb74fg45cnk6pmujwld2u-story.html","_id":"00000182-89ae-d71e-abeb-cffe4a580000","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a580001","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>Riot Fest management apologizes and its contractor steps down after ‘hostile’ community meeting: Momentum to booting the festival is gaining traction, reports Tribune’s Kinsey Crowley
— CPS outlines Covid-19 protocols for new school year, including expanding test-to-stay program,","link":{"target":"NEW","attributes":[],"url":"https://www.chicagotribune.com/news/breaking/ct-chicago-public-schools-covid-protocols-2022-23-school-year-20220809-mu4tc7ypjfesxkb4efnsnpgfhe-story.html","_id":"00000182-89ae-d71e-abeb-cffe4a580002","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a580003","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>CPS outlines Covid-19 protocols for new school year, including expanding test-to-stay program, by Tribune’s Tracy Swartz
— Man allegedly stole $56,000 in watches from Ralph Lauren on Mag Mile — then was arrested hours later for hammer attack at Mother Hubbard’s,","link":{"target":"NEW","attributes":[],"url":"https://chicago.suntimes.com/crime/2022/8/9/23298406/felon-vintage-watches-ralph-lauren-hammer-attack-mother-hubbards","_id":"00000182-89ae-d71e-abeb-cffe4a590000","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a590001","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>Man allegedly stole $56,000 in watches from Ralph Lauren on Mag Mile — then was arrested hours later for hammer attack at Mother Hubbard’s, by Sun-Times’ Tom Schuba
— Lawsuit claims grand jury was misled in case of Christopher Vaughn, Oswego man convicted of murdering wife and 3 kids in 2007,","link":{"target":"NEW","attributes":[],"url":"https://www.chicagotribune.com/news/breaking/ct-vaughn-murder-suit-20220809-iwpxqyl7ybdmrj7vnb5zynawg4-story.html","_id":"00000182-89ae-d71e-abeb-cffe4a590002","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a590003","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>Lawsuit claims grand jury was misled in case of Christopher Vaughn, Oswego man convicted of murdering wife and 3 kids in 2007, by Tribune’s Robert McCoppin
— State Sen. Michael Hastings suing Frankfort police over release of report alleging he abused his wife,","link":{"target":"NEW","attributes":[],"url":"https://www.chicagotribune.com/suburbs/daily-southtown/ct-sta-senator-hastings-frankfort-police-report-st-0810-20220809-apgbyx3lavdybnprw333fujvyy-story.html","_id":"00000182-89ae-d71e-abeb-cffe4a590004","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a590005","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>State Sen. Michael Hastings suing Frankfort police over release of report alleging he abused his wife, by Daily Southtown’s Mike Nolan
Barbara Flynn Curry was Democratic Majority Leader of the Illinois House of Representatives from 1997 to 2019. | AP file photo
Former Illinois House Majority Leader Barbara Flynn Currie is the 2022 recipient of the Paul Simon-Jim Edgar Statesmanship Award presented by the Paul Simon Public Policy Institute. Former Gov. Jim Edgar and John Shaw, director of the institute, announced the award. In a statement, they praised Currie’s “four decades of forceful, creative, consequential, and civil leadership in the Illinois General Assembly.”
INTRODUCING POWER SWITCH: The energy landscape is profoundly transforming. Power Switch is a daily newsletter that unlocks the most important stories driving the energy sector and the political forces shaping critical decisions about your energy future, from production to storage, distribution to consumption. Don’t miss out on Power Switch, your guide to the politics of energy transformation in America and around the world. SUBSCRIBE TODAY.
We asked what item you took on your way out the door from an old job:
We were expecting folks to take something like boxes of pens or wine glasses from the lunch room (cough, cough). But most of you said name plates, including Beth A. O’Mahoney: “At all of my past jobs working in both state government and in the private sector, I have taken my name plate from my cube or office. I have quite the collection now.”
Cam Davis, an MWRD commissioner: “A coffee mug that says, ‘Don’t Let The Bastards Wear You Down’ from the old Lake Michigan Federation.”
Larry Beaumont: “I took a mockup of a pipe bomb that I used in a trial of a bombing murder case I prosecuted.”
Lissa Druss, Strategia Consulting CEO: “My Rolodex. That’s right before I started putting phone numbers into my Palm Pilot! And that’s before I got my BlackBerry.”
Dan Schneider, staff attorney at Legal Action Chicago: “After interning for a music distribution company in Massachusetts, my boss let me select an item out of their inventory to take home with me. I choseRappin’ With The Rickster","link":{"target":"NEW","attributes":[],"url":"https://www.amazon.com/Rappin-With-the-Rickster/dp/B003675NFQ","_id":"00000182-89ae-d71e-abeb-cffe4a5f0003","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a5f0004","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”> Rappin’ With The Rickster, a DVD compilation of ‘New York Zelig","link":{"target":"NEW","attributes":[],"url":"https://www.nytimes.com/2021/02/02/arts/music/ricky-powell-dead.html","_id":"00000182-89ae-d71e-abeb-cffe4a600000","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a600001","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>New York Zelig’ Ricky Powell’s early 1990s cable access show.”
What can’t you miss at the Illinois State Fair? Email [email protected]","link":{"target":"NEW","attributes":[],"url":"mailto:[email protected]","_id":"00000182-89ae-d71e-abeb-cffe4a600002","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a600003","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>[email protected]
‘People will die waiting’: America’s system for the disabled is nearing collapse:","link":{"target":"NEW","attributes":[],"url":"https://www.politico.com/news/2022/08/10/americas-system-for-the-disabled-is-nearing-collapse-00050713","_id":"00000182-89ae-d71e-abeb-cffe4a610000","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a610001","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>America’s system for the disabled is nearing collapse: “Providers for intellectually and developmentally disabled struggle to recruit and retain staff amid soaring inflation, pandemic burnout,” reports POLITICO’s Dan Goldberg.
— Trump endorsed 5 candidates in Tuesday’s primaries. Here are the winners,","link":{"target":"NEW","attributes":[],"url":"https://www.politico.com/news/2022/08/10/trump-endorsed-candidates-2022-primary-results-00050519","_id":"00000182-89ae-d71e-abeb-cffe4a620001","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a620002","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>Trump endorsed 5 candidates in Tuesday’s primaries. Here are the winners, by POLITICO’s Marissa Martinez
— Why the Trump search warrant is nothing like Hillary’s emails,","link":{"target":"NEW","attributes":[],"url":"https://www.politico.com/news/2022/08/09/why-the-trump-search-warrant-is-nothing-like-hillarys-emails-00050691","_id":"00000182-89ae-d71e-abeb-cffe4a620003","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a620004","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>Why the Trump search warrant is nothing like Hillary’s emails, by POLITICO’s Kyle Cheney
— Republicans who blast FBI’s Trump search are prepping to snag Joe in a Hunter Biden probe,","link":{"target":"NEW","attributes":[],"url":"https://www.politico.com/news/2022/08/10/republicans-hunter-biden-investigation-00050723","_id":"00000182-89ae-d71e-abeb-cffe4a620005","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a620006","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>Republicans who blast FBI’s Trump search are prepping to snag Joe in a Hunter Biden probe, by POLITICO’s Jordain Carney
— Democrats betting on progressives to keep control of Senate,","link":{"target":"NEW","attributes":[],"url":"https://www.politico.com/news/2022/08/10/progressives-fetterman-oz-trump-00050765","_id":"00000182-89ae-d71e-abeb-cffe4a620007","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a620008","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>Democrats betting on progressives to keep control of Senate, by POLITICO’s Holly Otterbein
— After court ruling, Dems expect to receive Trump’s tax returns ‘immediately,’ though Trump is likely to further appeal,","link":{"target":"NEW","attributes":[],"url":"https://www.politico.com/news/2022/08/09/house-panel-trumps-tax-returns-appeals-court-00050535","_id":"00000182-89ae-d71e-abeb-cffe4a620009","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a62000a","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>After court ruling, Dems expect to receive Trump’s tax returns ‘immediately,’ though Trump is likely to further appeal, by POLITICO’s Kyle Cheney
— Grand jury declines to indict woman in Emmett Till lynching,","link":{"target":"NEW","attributes":[],"url":"https://www.politico.com/news/2022/08/09/emmett-till-lynching-carolyn-bryant-accuser-00050694","_id":"00000182-89ae-d71e-abeb-cffe4a62000b","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a62000c","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>Grand jury declines to indict woman in Emmett Till lynching, via The Associated Press
— Demand for Italian beef is booming. Thank ‘The Bear’:","link":{"target":"NEW","attributes":[],"url":"https://www.nytimes.com/2022/08/09/dining/hulu-the-bear-italian-beef-sandwich.html","_id":"00000182-89ae-d71e-abeb-cffe4a630000","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a630001","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>Demand for Italian beef is booming. Thank ‘The Bear’: “The FX series has fueled a spike in sales of the sandwich at Chicago-specialty restaurants across the country,” via The New York Times.
— Robert Lee Berner Jr., an attorney with the law firm Baker & McKenzie where, for over 60nyears, he was a driving force of the firm’s global expansion, has died. He was 90. “A career highlight was successfully arguing one of the most consequential business law cases in the past century (Ernst & Ernst v. Hochfelder) in front of the U.S. Supreme Court,” according to his obituary","link":{"target":"NEW","attributes":[],"url":"https://www.legacy.com/us/obituaries/chicagotribune/name/robert-berner-obituary?id=36168849","_id":"00000182-89ae-d71e-abeb-cffe4a640000","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a640001","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>according to his obituary. Politicos might remember Berner as the father of Mary Berner, Louise Berner Holmberg, Robert L. Berner III, John R. Berner and Sheila Berner Kennedy, whose husband is Chris Kennedy.
— Nichelle Nichols blazed a trail from Robbins, Illinois, to the Starship Enterprise:","link":{"target":"NEW","attributes":[],"url":"https://www.wbez.org/stories/nichelle-nichols-blazed-a-trail-from-robbins-illinois-to-the-starship-enterprise/ea54d55d-454e-4e8e-b296-e13559384f81","_id":"00000182-89ae-d71e-abeb-cffe4a640002","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a640003","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>Nichelle Nichols blazed a trail from Robbins, Illinois, to the Starship Enterprise: Urban historian Shermann “Dilla” Thomas talked with Lisa Labuz about Nichelle Nichols and the trailblazers of Robbins, via WBEZ’s Cianna Greaves
Oct. 29: The Chicago Humanities Festival hosts a conversation between Pete Souza (the official White House photographer for Barack Obama and Ronald Reagan) and David Axelrod (former chief strategist and senior adviser to Obama) “for a look at the moments — little and big — that make up life in the Oval Office.”Tickets here","link":{"target":"NEW","attributes":[],"url":"https://www.chicagohumanities.org/events/attend/pete-souza-david-axelrod/","_id":"00000182-89ae-d71e-abeb-cffe4a650000","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a650001","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”> Tickets here
TUESDAY’s ANSWER: It was too easy! Congrats to Lilly Athamanah, Marc Schulman, Ed Mazur, Andy Shaw, Loren Wassell and Stephen Rosenblat for being quick on the draw to answer that playwright Jim Jacobs’ experience at Taft High School in Chicago","link":{"target":"NEW","attributes":[],"url":"https://www.chicagotribune.com/news/ct-xpm-2000-10-13-0010130082-story.html","_id":"00000182-89ae-d71e-abeb-cffe4a670000","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a670001","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>Taft High School in Chicago was the basis for the musical “Grease.” It was our homage to Olivia Newton John who died earlier this week.
H/T to David Isaacson of Theater Oobleck for the 1971 poster of the play “Grease,”","link":{"target":"NEW","attributes":[],"url":"https://www.politico.com/f/?id=00000182-8302-dd9f-a7ea-abf23d3a0000","_id":"00000182-89ae-d71e-abeb-cffe4a670002","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a670003","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>poster of the play “Grease,” before it became a movie in 1978.
TODAY’s QUESTION: What two DuPage County towns had a rivalry over the location of a courthouse? Email [email protected]","link":{"target":"NEW","attributes":[],"url":"mailto:[email protected]","_id":"00000182-89ae-d71e-abeb-cffe4a670004","_type":"33ac701a-72c1-316a-a3a5-13918cf384df"},"_id":"00000182-89ae-d71e-abeb-cffe4a670005","_type":"02ec1f82-5e56-3b8c-af6e-6fc7c8772266"}”>[email protected]
Former state Sen. Jim DeLeo, Cook County Government chief of staff Kara Highfill, 42nd Ward business affairs director Joanna Angarone, Chicago Neighborhood Initiatives President David Doig and essayist Elaine Soloway.
-30-
© 2022 POLITICO LLC
Mack Brown Live! Returns To TOPO Starting Aug. 22 – University of North Carolina Athletics – UNC Athletics
August 9, 2022
NOTE: The October 31 show will be pre-recorded in studio because of Halloween and the festivities that surround the holiday on Franklin Street.
New Heels4Life Executive Director Aims To Extend NIL Reach, Opportunities
Single-Game Football Tickets On-Sale
UNC Featured On ACC Football Road Trip Thursday
Little Named To Mannelly Award Watch List
Thanks for visiting !
The use of software that blocks ads hinders our ability to serve you the content you came here to enjoy.
We ask that you consider turning off your ad blocker so we can deliver you the best experience possible while you are here.
Thank you for your support!
Price Alert: Shares of Equillium (EQ) Trade 7.04% Lower at Midday August 8 – Equities News
EQ – Market Data & News
Shares of Equillium Inc (NASDAQ: EQ) fell 7.04% Monday.
As of 11:36:34 est, Equillium is currently sitting at $2.51 and dropped $0.19 so far today.
Equillium has moved 17.39% over the last 30 days and has moved YTD 28.38% based on the most recent close.
The company is set to release earnings on 2022-08-09.
For technical charts, analysis, and more on Equillium visit the company profile.
About Equillium Inc
Equillium is a clinical-stage biotechnology company leveraging deep understanding of immunobiology to develop novel products to treat severe autoimmune and inflammatory disorders with high unmet medical need. Equillium is developing itolizumab for multiple severe immuno-inflammatory diseases, including acute graft-versus-host-disease (aGVHD), lupus/lupus nephritis and uncontrolled asthma.
To get more information on Equillium Inc and to follow the company's latest updates, you can visit the company's profile page here: Equillium Inc's Profile. For more news on the financial markets be sure to visit Equities News. Also, don't forget to sign-up for the Daily Fix to receive the best stories to your inbox 5 days a week.
Sources: Symbol info widget is provided by TradingView based on 15-minute-delayed prices. All other article data is provided by IEX Cloud on 15-minute delayed prices or EOD company info.
Stock price data is provided by IEX Cloud on a 15-minute delayed basis. Chart price data is provided by TradingView on a 15-minute delayed basis.
DISCLOSURE: The views and opinions expressed in this article are those of the authors, and do not represent the views of equities.com. Readers should not consider statements made by the author as formal recommendations and should consult their financial advisor before making any investment decisions. To read our full disclosure, please go to: http://www.equities.com/disclaimer
Loading…
End of content
No more articles to load
© 2022 Equities News | Equities.com, Inc.
* All dates and time are being displayed in Eastern Standard Time (EST).
Follow Equillium Inc.
Atrial Fibrillation Pattern & Outcomes of Early Rhythm Control (ERC) Therapy – Physician's Weekly
For latest News and updates
Select Page
Aug 8, 2022
It was unknown if the pattern of atrial fibrillation (AF) or the time of AF treatment affects how well the early rhythm control (ERC) works. For a study, researchers sought to examine patients who presented with various AF patterns and received either conventional treatment or ERC and were compared in terms of clinical features and outcomes.
In the predetermined analysis of the EAST-AFNET 4 (Early treatment of atrial fibrillation for stroke prevention) experiment, the effects of ERC were compared in first-diagnosed atrial fibrillation (FDAF), paroxysmal AF (paroxAF), and persistent AF (persAF). Over the course of a mean follow-up of 5.1 years, associations between AF pattern & main outcomes (first major outcome: cardiovascular mortality, stroke, and hospitalization for heart failure and acute coronary syndrome; second primary outcome: nighttime hospital stays per year) were compared. The EQ-5D was used to evaluate changes in quality of life factors connected to health.
In comparison to patients with paroxAF (n=994, 70 years, 50.0% female), and persAF (n=743, 70 years of age, 38.0% female), FDAF patients (n=1,048, enrolled 7 days after diagnosing AF) were marginally older (71 years, 48.0% female). In each of the 3 AF patterns, ERC decreased the main result. Hospitalizations for acute coronary syndrome were more common in FDAF (incidence rate ratio [IRR]: 1.50; 95% CI: 0.83-2.69; P=0.032) than in paroxAF (IRR: 0.64; 95% CI: 0.32-1.25) or persAF IRR: 0.50; 95% CI: 0.25-1.00). Patients with FDAF stayed in the hospital longer (IRR: 1.38; 95% CI: 1.12-1.70; P=0.004) than patients with paroxAF (IRR: 0.84; 95% CI: 0.67-1.03) and persAF (IRR: 1.02; 95% CI: 0.80-1.30). ERC enhanced patients’ health-related quality of life (EQ-5D score) in patients with paroxAF and persAF but not in patients with FDAF (P=0.019).
In all AF patterns, ERC lowers the first primary composite result. Particularly on ERC, patients with FDAF are at significant risk for acute coronary syndrome and hospitalization.
Reference: jacc.org/doi/10.1016/j.jacc.2022.04.058
Your email address will not be published. Required fields are marked *
© 2022 Physician’s Weekly![]()


