Blog

Watch Chelsea train live at Stamford Bridge! | News | Official Site | Chelsea Football Club – Chelsea FC

You have the opportunity to see Thomas Tuchel and his players up close and personal at an exclusive open training session being held at Stamford Bridge later this month…
The event will be held on Tuesday 23 August but be warned, you’ll have to be quick to secure your seat for this popular event!  
This will be the perfect family event and attendees at the event will also have the chance to feature in the squad photo with the Chelsea players. The Blues squad will line up in front of the stand full of fans for a big group photo (including the fans) which will be shared on our digital channels. 
There are a limited number of tickets available for the open training session, which are available for fans to come and attend for FREE. 
Starting tomorrow, (Wednesday 10 August), there will be a 24-hour early access period only available to Chelsea members and season ticket holders. After this, tickets will be available to all Chelsea fans until they’re sold out. Get yours at the links below.
Stamford Bridge Open Day – Tuesday 23 August – Doors open 2.30pm
Members and season ticket holders book your early-access place here! (Opens 10/08)
Club Chelsea and Westview members book your early-access place here! (Opens 10/08)
All other fans can book your place here! (Opens 11/08)
We look forward to welcoming you to the Bridge for what promises to be a special day! 

source

TG Therapeutics Provides Business Update and Reports Second Quarter 2022 Financial ResultsConference call to be held today, August 8, 2022 at 8:30 AM ET – BioSpace

Skip to main content
Published: Aug 08, 2022
NEW YORK, Aug. 08, 2022 (GLOBE NEWSWIRE) —TG Therapeutics, Inc. (NASDAQ: TGTX) today announced its financial results for the second quarter ended June 30, 2022 and recent company developments, along with a business outlook for the remainder of 2022.
Michael S. Weiss, the Company’s Chairman and Chief Executive Officer, stated, “Our primary focus for the remainder of this year is working toward the approval of ublituximab, which has a PDUFA goal date of December 28, 2022, and preparing for its potential launch in early 2023. If approved, we believe ublituximab has the potential to be a meaningful treatment option for patients with relapsing forms of multiple sclerosis.” Mr. Weiss continued, “During the first half of the year we implemented a number of cost-saving measures, and we are pleased to report those efforts have resulted in a lower than expected 2Q burn, which we believe puts us in a good financial position as we approach the potential launch of ublituximab.”

Recent Highlights
Ublituximab in Multiple Sclerosis
Key Objectives for 2022
Financial Results for the Three and Six Months Ended June 30, 2022
CONFERENCE CALL INFORMATION
The Company will host a conference call today, August 8, 2022, at 8:30 AM ET, to discuss the Company’s second quarter 2022 financial results.
In order to participate in the conference call, please call 1-877-407-8029 (U.S.), 1-201-689-8029 (outside the U.S.), Conference Title: TG Therapeutics. A live audio webcast will be available on the Events page, located within the Investors & Media section, of the Company’s website at http://ir.tgtherapeutics.com/events. An audio recording of the conference call will also be available for replay at www.tgtherapeutics.com, for a period of 30 days after the call.

ABOUT TG THERAPEUTICS
TG Therapeutics is a biopharmaceutical company focused on the acquisition, development and commercialization of novel treatments for B-cell diseases. In addition to a research pipeline including several investigational medicines, TG has completed a Phase 3 program for ublituximab, an investigational glycoengineered monoclonal antibody that targets a unique epitope on CD20-expressing B-cells, to treat patients with relapsing forms of multiple sclerosis (RMS). For more information, visit www.tgtherapeutics.com, and follow us on Twitter @TGTherapeutics and LinkedIn.

Cautionary Statement
This press release contains forward-looking statements that involve a number of risks and uncertainties. For those statements, we claim the protection of the safe harbor for forward-looking statements contained in the Private Securities Litigation Reform Act of 1995. Such forward looking statements include but are not limited to statements regarding the Company’s plans, goals, strategies, timelines, anticipated milestones, and expectations for our current or future approved drugs and drug candidates, including; plans and timelines for potential approval of ublituximab monotherapy in RMS and, if approved, plans and timelines for commercializing ublituximab in RMS; the timing of initiation of clinical trials or the results of ongoing and planned clinical trials; the potential benefits of ublituximab in RMS or any of the Company’s drug candidates in treating patients; and financial guidance regarding the period in which we will have sufficient capital resources to fund our operations.
All forward-looking statements in this press release are based on management’s current expectations and beliefs and are subject to a number of risks and uncertainties. In addition to the risk factors identified from time to time in our reports filed with the Securities and Exchange Commission, factors that could cause our actual results to differ materially from those expressed or implied by any forward-looking statements contained in this press release include the following: our ability to, if approved, establish, maintain and enhance our commercial infrastructure, to market and sell ublituximab; the potential for variation from the Company’s projections and estimates about the potential market for ublituximab due to a number of factors, including for example, limitations that regulators may impose on the required labeling for the product; our ability to reach certain regulatory milestones at all or within the timelines projected; our ability to obtain, or to obtain within the timeline projected or for the indications sought, marketing authorization for our product candidates, including ublituximab monotherapy in RMS; our ability to successfully complete analyses of our clinical study results and present data within the timeframes projected; the risk that the interim, top-line and preliminary data from our clinical trials that we announce or publish may change, or the perceived product profile may be impacted, as more patient data or additional endpoints are analyzed; the risk that regulatory authorities disagree with the conclusions we have reached or data we have publicly disclosed and we are unable to obtain approval for, or successfully commercialize, our product candidates; the risk that preclinical and clinical results for the Company’s drug candidates may not support further development of such drug candidates; actions of regulatory agencies, which may affect the initiation, timing and progress of clinical trials; the Company’s reliance on third parties to perform manufacturing, distribution and supply services, and a range of other support functions for its clinical products; the risk that the ongoing COVID-19 pandemic and associated government control measures or other global issues such as the ongoing conflict in the Ukraine have an adverse impact on our clinical trials and other research and development plans or our regulatory filings and commercialization efforts; the accuracy of our estimates regarding expenses, future revenue, capital requirements and needs for additional financing; our financial performance; and the sufficiency of our existing capital resources to fund our future operating expenses for the timelines projected. Further discussion about these and other risks and uncertainties can be found in our Annual Report on Form 10-K for the fiscal year ended December 31, 2021 and in our other filings with the U.S. Securities and Exchange Commission, including the most recent quarterly report on Form 10-Q for the second quarter ended June 30, 2022.
Any forward-looking statements set forth in this press release speak only as of the date of this press release. We do not undertake to update any of these forward-looking statements to reflect events or circumstances that occur after the date hereof. This press release and prior releases are available at www.tgtherapeutics.com. The information found on our website is not incorporated by reference into this press release and is included for reference purposes only.

CONTACT:
Investor Relations
Email: [email protected]
Telephone: 1.877.575.TGTX (8489), Option 4
Media Relations:
Email: [email protected]
Telephone: 1.877.575.TGTX (8489), Option 6
TG Therapeutics, Inc.
Selected Condensed Consolidated Financial Data
Statements of Operations Information (in thousands, except share and per share amounts; unaudited):
 
Condensed Balance Sheet Information (in thousands):
* Condensed from audited financial statements


Primary Logo
Back to news
Back to top
© 1985 – 2022 BioSpace.com. All rights reserved. Powered by Madgex Job Board Software

source

Systems of axon-like circuits for self-assembled and self-controlled growth of bioelectric networks | Scientific Reports – Nature.com

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 13371 (2022)
158 Accesses
1 Altmetric
Metrics details
By guiding cell and chemical migration and coupling with genetic mechanisms, bioelectric networks of potentials influence biological pattern formation and are known to have profound effects on growth processes. An abstract model that is amenable to exact analysis has been proposed in the circuit tile assembly model (cTAM) to understand self-assembled and self-controlled growth as an emergent phenomenon that is capable of complex behaviors, like self-replication. In the cTAM, a voltage source represents a finite supply of energy that drives growth until it is unable to overcome randomizing factors in the environment, represented by a threshold. Here, the cTAM is extended to the axon or alternating cTAM model (acTAM) to include a circuit similar to signal propagation in axons, exhibiting time-varying electric signals and a dependence on frequency of the input voltage. The acTAM produces systems of circuits whose electrical properties are coupled to their length as growth proceeds through self-assembly. The exact response is derived for increasingly complex circuit systems as the assembly proceeds. The model exhibits complicated behaviors that elucidate the interactive role of energy, environment, and noise with electric signals in axon-like circuits during biological growth of complex patterns and function.
Electric phenomena are essential in the development of complex biological structures and their function. By guiding cell migration1, electric fields and potentials influence wound healing and tissue regeneration2, and direct pattern formation (like left or right, up or down3) in processes such as early neuronal development4 or growth of plant roots5 and pollen tubes6. The aggregate effect of potential differences across membranes, gap junctions, action potentials in axons, and other bioelectric phenomena forms networks of electric potentials that communicate among cells to influence gene expression and thus, formation of biological structure and function in embryogenesis and morphogenesis7,8,9. Changes in physical structure are communicated electrically throughout the network, resulting in coordination of distant growth processes to produce spatially differentiated target structures10. The flow of information from the environment to biological structure and function through electric potentials represents computation without neurons and is postulated to be a primitive and ancient mechanism11.
Self-assembly models are inspired by autonomous interactions among component parts that build complex structures, including examples such as biomolecules (DNA and proteins), living organisms, social networks, and even galaxies. Theoretically, self-assembly is an algorithmic process, resulting in complex and powerful behavior that is capable of Turing universal computation12,13, and has produced new methods for building nanostructures14.
Originally motivated by DNA-based self-assembly14, the circuit tile assembly model (cTAM) was introduced to demonstrate how self-controlled growth15 and self-replication16 can be achieved as emergent properties without explicit programming. Rather, they are made possible by a finite resource (e.g., an electric potential (nu _0)) that is consumed as tiles with simple circuits bind to a growing circuit assembly15, as illustrated in Fig. 2. In the cTAM, tiles attach if a constant voltage (Direct Current or DC) at the terminus is greater than or equal to a threshold (tau). This assembly process produces a family of circuits whose electrical properties change as the circuit grows, which in turn, modulates electric signals that are communicated throughout, as illustrated in Fig. 2. In contrast to models based on differential equations, the cTAM is abstract and discrete, with the potential to reveal the essence of electrical effects in biological phenomena. As an abstract model, the cTAM is amenable to analysis for exact prediction of its maximum circuit size through self-controlled growth and thus, of its electrical properties, as a function of the voltage source (nu _0) or threshold (tau)15,17,18, and their effects on growth of the assembled circuit (such as self-replication16). Figure 1 shows examples of phenomena to which this model could be applied to gain quantitative insights into their dynamical properties at the macrolevel.
Examples of biological phenomena that could potentially be analyzed by the acTAM models and its variants to gain quantitative insights into their dynamical properties at the macrolevel (Galvanic Phenomena19, DNA–Protein Interactions20, Cellular Membranes21, Axonal Networks22) .
The goal of this paper is to further elucidate the role of electric signals in the growth of biological structures by adding a capacitor to the attaching tile in the cTAM model and extending the analysis to the frequency and time domains. The specific example biosystem that the cTAM represents can be regarded as an axon, and its electrically-driven growth as thresholded signal communication with its environment. Thus, this cTAM is termed the axonal cTAM (or just acTAM), which also denotes the time-varying nature of the model (‘ac’ for alternating current, or AC). The acTAM circuits approximate equivalent circuits for the propagation of action potentials in cable theory23 and the Hodgkin-Huxley model24. Propagation of electric signals along axons are the physical basis for communication from sensory to information-processing neurons and are fundamental to neural information processing. Moreover, axonal networks are capable of information processing25,26 and computation27 without neurons.
Capable of modeling both spiked and graded signals, acTAMs inherit a unique property of the cTAM models in that they produce a dynamically changing family of circuits in which both structure and electrical properties vary as growth proceeds. The acTAM captures the coupled effects of growth and electric potential in an axon-like circuit. In early neural circuit assembly, spontaneous electrical activity is important in development, which is followed by network refinement by signals evoked from sensory input4,28. Electrical activity also promotes neural repair29. Thus, the cTAM could also serve as a tool to understand the effect of electrical activity on the growth of axonal networks, as well as its role in the electric potential distributions that arise in bioelectric networks8 that lead to observable properties of form and function in biological organisms.
In what follows, the acTAM is defined, and the expressions for the node potentials as a function of the parameters and size of the circuit are derived Nodal analysis of acTAM systems and applied to the analysis of steady-state behavior. The transient and complete solutions are derived. The product of the acTAM is a system of ladder circuits, and their mature size is characterized. Finally, a discussion of the significance of the acTAM for development and function of structures in biological systems is presented.
An cTAM ladder circuit is assembled as ladder tiles attach to a seed with a DC voltage source (nu _0) and subsequently, each other as long as the voltage across the resistor R at the terminus is at least (tau). In addition, Watson–Crick complementary DNA glues at the top (a–a(^{prime })) and bottom (b–b(^{prime })) bind the assembly together.
This section presents definitions of the cTAM (to make the paper self-contained) and its extension to the acTAM.
(acTAM Circuit) An axonal circuit is a tuple
on a graph (N, E), where N denotes the set of nodes corresponding to electrical nodes in the circuit, E denotes the set of edges, C is a set of circuit components (chosen from resistors, capacitors, and voltage sources) assigned to edges (e_{(i,j)} in E) where ({i, j} in N), and g maps some subset of nodes (partial N) to some subset of glues labeled from a finite alphabet (Sigma), i.e. (g: partial N rightarrow Sigma). (partial N = N_{in} cup N_{out}) consists of two finite subsets of nodes, input nodes (N_{in}) and output nodes (N_{out}) of the circuit, and are the points at which glues bind tiles together on the boundary of the circuit. The size of the circuit is the number of tiles in it. (A cTAM is an acTAM with only resistor tiles, without capacitors.)
(acTAM) An axonal tile assembly system (acTAM) is a tuple (mathscr {C} = (Gamma , S, nu _0, zeta , tau )), where (Gamma) is a finite nonempty alphabet of tiles, (S subset Gamma) is a subset of seed tiles, (nu _0) is the potential at the power source, (zeta : Gamma (N_{in}) times Gamma (N_{out}) rightarrow {0,1}) is a glue indicator function that determines whether glues on input nodes of a tile match or bind to glues on output nodes of acTAM circuits, and (tau in {mathbb {R}}_{+}) is the threshold voltage that sets one of the criteria for further tile attachments.
The simplest acTAM consists of two circuit tiles, a seed tile (Fig. 3) and an unlimited number of copies of one ladder tile (Fig. 4). The circuit in the tiles consists of a resistor (alpha R) in series with a parallel combination of a capacitor C and a resistor R. The ladder circuit is equivalent to that used in cable theory23 to model signal propagation down axons, with (alpha R) being the longitudinal resistance, R the membrane resistance, and C the membrane capacitance. Growth of the ladder is determined by the electric potential difference across the RC pair, or between the nodes joining the (alpha R) resistors and the RC pair and the common ground (bottom of the circuit). Ladder tiles attach to the seed and subsequently, to other ladder tiles, if and only if the node potential at the output nodes of last tile in the assembly is at least (tau) (Fig. 5). The electric potential at node k in a given acTAM circuit of size n tiles at time t will be denoted (nu ^n_k(t)) (Or just (nu _k(t)) if a certain size n is assumed), where (k=0,ldots ,n), including the source potential (nu _0^n(t)) (or just (nu _0)) at the seed.
In the simplest model, ladder tiles bind to form assemblies in the shape of growing ladders. In a reaction-rate limited regime, ladder tiles are present in saturation and always bind whenever the tip potential is at least (tau), whereas in a diffusion-limited regime, ladder tiles only arrive and attach at set time intervals. The specific mechanism by which tiles attach can be left unspecified under either assumption. One specific implementation would follow the well known aTAM model of DNA self-assembly12,13, in which a tile has a pair of oligonucleotides a, b on the output nodes of a DNA molecular tile that may bind to their corresponding Watson-Crick complements (a^{prime }, b^{prime }) on input nodes of the attaching ladder tile. Other models can use protein-protein interactions resulting from electric potentials forming across ion channels11. In this paper, assembly processes are monotonic, i.e., once a tile is attached, the attachment will never dissolve. The behavior of the family of acTAM circuits is characterized below in general, for both DC and AC.
The seed tile for the acTAM consists of a voltage source (nu _0(t)), two resistors, R and (alpha R), and a capacitor C. The top node has glue a, and bottom node has glue b.
The ladder tile for the acTAM consists of resistors R and (alpha R), and a capacitor C. The input nodes have glues (a^{prime }) and (b^{prime }) on top and bottom and the output nodes have glues a and b on top and bottom, both respectively.
An acTAM ladder circuit is assembled as ladder tiles attach to a seed with a voltage source (nu _0(t)) and subsequently, each other as long as the voltage across the RC pair at the terminus is at least (tau). In addition, the hybridized glues at the top (a–a(^{prime })) and bottom (b–b(^{prime })) bind the assembly together. Nodes are labeled k and the terminal (last) node n.
Kirchoff’s Current Law (KCL) is about conservation of charge and states that the sum of the currents entering and exiting any node in a circuit must be 0. In particular, the seed (Fig. 3) has a distribution of potentials at its three nodes (source (nu _0), ground (nu _{-1}), and node potential (nu _1) at the tip of the tile (between (alpha R) and the parallel C–R pair). Attachment of successive ladder tiles causes a (speed of light, nearly instantaneous for relatively small circuits) propagation of the signals to the other tiles, which reconfigures the node potentials at the previous nodes into a new steady state after a brief transient, as illustrated in Fig. 6. Over time, the self-assembly process in an acTAM model generates a family of circuits of increasing size (number of tiles) with a dynamic potential distribution (nu ^n_k) at nodes k in a ladder of size n ((kin {1,ldots ,n})). Because of the series-parallel resistance of the circuits in the family, the tip potentials (nu ^n_n) are a decreasing function of time or size, so they eventually become unable to support new attachments, as shown in the DC case in15,17. Thus an acTAM really defines a dynamical system of growing circuits of increasing size that exhibit emergent characteristic behavior.
Response of first node potential in the seed tile for (alpha = 1, R=1 Omega , C=10^{-3} F), and (|nu _0| = 50 text {V}). The second tile attaches to the seed at t = 0.003 s, causing the node potential at node 1 ((nu _1)) to undergo a transient. The steady-state (ss) DC value 25 V (top line) for the seed alone is shown for reference.
For the analysis of the acTAM, the differential equations for a system of circuits are derived using nodal analysis (KCL). First, the system is solved for a non-time-varying (DC) case, which makes the capacitor an open circuit and the circuit purely resistive (“Nodal analysis of acTAM systems”). Then, in “Steady-state phasor analysis”, the steady-state response in the frequency domain is derived from the DC equations with complex impedances. Thus, the steady-state time response is derived for a sinusoidal input voltage. The transient response (“Transient response”) was determined from results in30 and initial conditions, which are set by the node potentials when a new ladder tile attaches. The complete response is steady-state plus transient (“Complete solution”). The dynamic behavior is shown in Fig. 7.
Response of node potentials for parameters (alpha = 1, R=1 Omega , C = 10^{-3} F), and (|nu _0| = 50 text {V}). Tiles attach every t = 0.003 s, causing the node potentials to undergo transients before returning toward steady-state values. With a threshold of (tau = 3 text {V}), no further attachments occur past node (k=4).
The temporal dynamics of the circuit system assembled in the acTAM model can be characterized in general using the equations for the node voltages (nu ^n_k) obtained from Kirchoff’s Current Law (KCL). (We will drop the superindex n when the context is not ambiguous.) Given the circuit in Fig. 5, for an arbitrary intermediate node k, where the current in the capacitor is (C d nu _k / d t), the node equation is
where (nu _k) is the electric potential at node k. Rearranging and using the shorthand (nu _k^{prime } = d nu _k/d t), the differential equation for (nu _k) is
For the first node (k=1), the equation is
and for the last node (k=n,)
In matrix form, the system of differential equations thus becomes
Under direct current (DC, time invariant supply), the capacitor C is an open circuit and can be ignored, and thus, the general form of the node equations for node k of n is
The set of equations then becomes
where the matrix of coefficients is
and the source vector is
with (nu _0) the DC source potential. According to Cramer’s rule, the node potentials are then given by
where ({mathbf {A}}^{(k)}_n) is the matrix with the k-th column of ({mathbf {A}}_n) (Eq. 8) replaced with the vector ({mathbf {b}}_n) from Eq. (9), and (|cdot |) or a corresponding capital letter denotes the determinant of the corresponding matrix. Since ({mathbf {A}}_n) is a tridiagonal matrix for (n ge 2), the determinants (A_n = |{mathbf {A}}_n|) satisfy a recurrence relation
with (A_1 = 1+alpha), and (A_{0} = 0). Equation (11) is a linear recurrence, and has a solution similar to that derived in31 for equivalent resistance. Therefore, the general solution for a circuit ladder of size n is a linear combination
where (a_1) and (a_2) are constants, and (rho _1) and (rho _2) are the roots of the characteristic equation of the recursion,
Solving Eq. (13) yields two solutions,
Using the the initial conditions from Eq. (11) with (k=1) and (k=2),
yields the following two equations,
Solving for (a_1) and (a_2) gives
The recurrence for (A_n^{(k)}=|{mathbf {A}}_{n}^{k}|) is
where
with (a_1) and (a_2) given by Eq. (15). Therefore, according to Cramer’s rule (Eq. 10), the node potentials at node k are
and for the last (terminal) node ((k=n)) in the ladder, the node potential is
where (nu _0) is the source voltage.
Since (|rho _2| < 1), as n becomes large, the node potential at the terminus of the ladder in the last tile is bounded by
With a sinusoidal time-varying source (nu _0(t)), phasor analysis can be used to derive the steady state response of the circuit in Fig. 5. Phasor analysis represents circuit components with complex impedances, allowing the steady state behavior of the circuit to be solved using nodal analysis, as in the DC case. The impedances are (Z_1 = R/(1 + j omega R C)) for the parallel combination of R and C and (Z_2 = alpha R) for the series resistor. For an intermediate node k other than 1 or n, the node equation is
with (omega) the angular frequency. If we let (alpha ^{prime } = alpha (1 + j omega R C)), then, the system of equations from nodal analysis is identical to those for DC (Eq. 7), except the node potentials are now in the phasor or frequency domain. Therefore, with that substitution, the solution for node potentials is the same as Eq. (17),
with complex
and
in which (alpha ^{prime }) has been substituted for (alpha). The node potential at the terminus of the ladder is bounded by Eq. (20) with (alpha ^{prime }) substituted for (alpha),
where the source voltage is now a function of frequency (omega). Converting from frequency back to the time domain, the steady state node voltages are
where (|nu _k|) is the magnitude and (angle nu _k) is the phase of the complex node potentials (nu _k(omega )). Like axons, the acTAM ladder is a low-pass filter. The magnitude of the frequency response (Eq. 22) and phase are shown in Figs. 8 and 9, respectively.
Magnitude of the frequency response for parameters that approximate an axon ((alpha = 10^{-6}, R = 10^{12} Omega , C = 10^{-8} F), and (|nu _0| = 100 text {mV})).
Phase of the frequency response for parameters that approximate an axon ((alpha = 10^{-6}, R = 10^{12} Omega , C = 10^{-8} F), and (|nu _0| = 100 text {mV})).
According to30, the eigenvalue for node k of n for the matrix in Eq. (8) with (alpha ^{prime }) substituted for (alpha) is
and the ith value in the kth eigenvector (chi _{i,k}) for (lambda _k) is
The transient response for node k of n is thus
where the (b_i)’s are determined from initial conditions.
With a sinusoidal time-varying source (nu _0(t)), the complete solution for a node (k in {1,ldots ,n}) is the sum of the transient (Eq. 29) and steady-state (Eq. 26) responses,
for a ladder of length n. The constants (b_i) in Eq. (29) are determined by initial conditions, which are the node potentials when a new tile attaches or are the values of the potentials (nu ^{n-1}_k(t)) for nodes (k in {1,ldots ,n-1}) in a ladder of length (n-1), i.e. the node potentials ((nu ^{n-1}_k(t))) in the ladder of length (n-1) are the initial conditions for the node potentials ((nu ^n_k(t))) in a ladder of length n. For an attaching tile, since it is disconnected from a source, the initial condition is (nu ^{n}_n(0)=0). If attachments to a growing ladder only occur after it has practically reached steady state, then, the initial conditions for attachment to a ladder of size n are the DC values for the node potentials, or (nu ^n_k) (Eq. 18).
Equation (30) for different nodes k is plotted for a couple of binding regimes. The first binding regime is an approximation for diffusion-limited growth in which tiles are available for binding at a fixed time interval T. Every T seconds, a new tile arrives at a growing ladder and attaches if the terminal potential is at least (tau). In Fig. 10, with circuit parameters that approximate those for axons, a DC voltage source is applied at (t=0) and tiles arrive every (T = 0.3) s. There is relatively little attenuation as growth proceeds because the value of (alpha) is small compared to R. The same circuit parameters and (T = 0.2) s are used in Fig. 11 with (nu _0(t) = 0.1 sin (omega t + phi )) and (omega = 20 pi) (rad/s). An exponential decrease in amplitude is observed, as well as shifts in the phase of the sinusoid. The other regime approximates reaction-rate limited growth in which tiles are available in saturation and is shown in Fig. 12. As soon as the terminal potential (nu _n ge tau), a new tile will attach. Because the time to reach (tau) is shorter than the time to reach steady-state, the response at each node is attenuated to a transient value at the attachment and changes to new time behavior with (nu ^{n-1}_{k}(t)) as the initial condition, where for the last tile (nu ^{n}_n(0) = 0) and for the next to last tile (nu ^{n}_{n-1}(0)=tau).
Complete response for parameters that approximate an axon ((alpha = 10^{-6}, R=10^{12} Omega , C=10^{-8} F), and (|nu _0| = 100 text {mV})) under a binding regime that approximates diffusion-limited growth with a time between attachments of (T = 0.3) s.
Complete response for parameters that approximate an axon ((alpha = 10^{-6}, R = 10^{12} Omega , C=10^{-8} F), and (nu _0(t) = 100 sin (omega t + phi ) text {mV}) with (omega = 20 pi) (rad/s)) under binding regime that approximates diffusion-limited growth with a time between attachments of (T = 0.2) s.
Complete response for parameters that approximate an axon ((alpha = 10^{-6}, R=10^{12} Omega , C=10^{-8} F), and (nu _0(t) = 100 text {mV})) under binding regime that approximates reaction-rate limited growth with tiles in saturation and a threshold of (tau = 50 text {mV}).
Using the expressions derived in previous sections, bounds on the length of the ladder can be derived. Given the biological connection of the acTAM ladder circuit and growth/signal propagation in axons, the length provides a measure of both the driving potential (nu _0) and the threshold (tau). In our model, (nu _0) represents the source of energy for the growth or the strength of the signal from a sensor, and the threshold (tau) represents those randomizing forces in the environment that oppose either growth or signal propagation. Thus, the length of the ladder is a measure of both.
To determine bounds on the length n of the ladder, the terminal voltage has to be less than the threshold, i.e.,
where the expression for (nu _n) is from Eq. (19). Rearranging, it is found that (A_n > nu _0/tau), which has no ready solution for n. Nevertheless, by using Eq. (20) for n large, it is found that the condition for growth to cease is bounded by
Thus, the growth is bounded and the length given (nu _0) and (tau) can be estimated. Moreover, for complex (alpha ^{prime }), length is not only modulated by input potential and threshold, but also by the frequency of the input. The dependence of length n on frequency is shown in Fig. 13.
Dependence of length n on (nu _0/tau) at different frequencies for parameters that approximate an axon ((alpha = 10^{-6}, R = 10^{12} Omega , C = 10^{-8} F), and (nu _0(t) = 100 text {mV})).
Likewise, the input potential (nu _0) and threshold (tau) that generate a given length can be determined from Eq. (31) as
For (alpha ^{prime } = 1) in Eq. (18), (A_n) becomes
By using relations for the golden ratio (phi) in Eq. (34), Eq. (33) becomes
where (F_{2n+1}) are the odd Fibonacci numbers, which is similar to a result for the equivalent resistance of long resistive ladders32. The golden ratio and Fibonacci numbers appear frequently in nature, mathematics, and human designs. Thus, the relationship of driving force (nu _0) and environment (tau) that produce a given length ladder to the golden ratio and the Fibonacci sequence provide further evidence of the connection of the acTAM to biological systems.
In addition, using the equation for the node potential (Eq. 18) and recurrence for the determinant (Eq. 11),
it is seen that this ratio is bound by a Lucas sequence U(P, Q) with (P=2+alpha ^{prime }), (Q=1), (U_1(P,Q) = 1), and (U_0(P,Q) = 0). Comparing (nu _0/tau) to generate lengths n and (n-1) as n becomes large gives
which is one of the solutions, (rho _1), to the characteristic (Eq. 14), the limit of the ratio of two numbers in the Lucas sequence, and for (alpha ^{prime } = 1) is equal to (1 + phi), where (phi) is the well-known golden ratio.
As mentioned earlier, (nu _0) represents a signal or energetic driving force for ladder elongation, (tau) represents randomizing forces or noise in the environment, and the length of the ladder for which the signal is (ge tau) is an artifact produced by the ratio (nu _0/tau), a kind of signal-to-noise ratio for the acTAM. Thus, the ladder is produced by an interaction between its own internal assembly process and its environment. Therefore, it is natural to ask, what is the sensitivity of the structure of the ladder, i.e. length, to changes in the environment, i.e (nu _0/tau). For any given (nu _0/tau), a unique ladder length is produced. Nevertheless, there are an infinite number of (nu _0/tau) that can produce a ladder of a given length n. Thus, the system itself, the ladders, can only tell us so much about the environment, (nu _0/tau). This is a consequence of the discreteness of the ladder growth in a continuous environment. Using Eq. (19), for a ladder of length (n-1) to add one additional tile, (nu _{n-1} = nu _0/A_{n-1} ge tau), and for growth to terminate at length n, (nu _n = nu _0/A_{n} < tau). Solving both for (nu _0/tau)
which represents the continuous interval that will produce a ladder of length n, spanning a voltage range
where (rho _1) and (rho _2) are given in Eq. (14), the solutions to the characteristic equation. For (alpha ^{prime }=1), Eq. (39) is equal to
which are the even Fibonacci numbers (F_{2n}). The size of this interval grows unboundedly as n becomes large. Thus, larger and larger (nu _0/tau) are required to produce longer ladders, and there is a larger spread in its values between adjacent lengths.
There are two interpretations of this remark. First, the length of the ladder, which is also a measure of the spatial extent over which a signal exceeds the threshold, is the artifact by which the acTAM assembly senses its environment. As the length of the ladder increases, the uncertainty about the (nu _0/tau) that produced the ladder increases, and alternatively, the length of the ladder becomes less sensitive to changes in (nu _0/tau). Autopoiesis33 is a theory that describes the ability of a system to maintain itself through a constructive relationship with an environment. In an abstract way, the acTAM captures some of the tradeoffs between a system being able to “know” its environment and also, remaining stable in the face of environmental changes. Living organisms have evolved to find a middle ground of sensing and responding to changes while maintaining those characteristics that define it as a species and have enabled it to survive in a given environment.
Living systems transduce flows of energy and matter from the environment to grow, produce complex biological patterns, respond to sensory input, and reproduce. Because of their complexity, it is a challenge to model the input-output relationships among the various flows into the system and predict the response, be that a structure or a behavior.
In the original cTAM (Fig. 1), simple circuit tiles attach to a growing ladder circuit if the voltage at the terminus is greater than or equal to a threshold. The cTAM enables self-controlled growth driven by a finite source of energy (voltage source) in a background environment. This complex and characteristic behavior comes as a direct consequence of the interaction among components of the model that are proxies for components in a biological network, namely matter (represented by circuit tiles), energy (input voltages), communication (through signal propagation and dynamic interaction among components representing somatic computation10,11 without a central information processor) and interaction with the environment (dynamic growth to homeostasis) at various levels of abstraction.
In this paper, the model has been extended to the acTAM to incorporate other components that are considered important for biological circuit models, such as capacitors and time-varying bioelectric signals, while keeping the model amenable to quantitative and predictive analysis.
Figures 8, 9, 10, 11, 12 and 13 represent results for the acTAM with circuit parameters approximating an axon. After all, the acTAM circuit is highly similar to that of axonal cable theory, which at this stage, is its most appropriate benchmark. In these figures, the acTAM produces a response that approximates signaling in axonal networks, namely it acts as a low-pass filter.
Levin and collaborators7,8,9 describe how complicated distributions of electric potentials might influence biological pattern formation through interactions with genetic mechanisms. The acTAM is a tool that enables exploration of the interaction between electric potentials that depend on the growth of a biological structure, and vice versa. Growth itself introduces more complicated time-varying behavior, as seen in Figs. 10, 11 and 12, and additional frequency components in the signal. Interestingly, in Figs. 10 and 12, transients from growth by attachment of circuit tiles results in waveforms that are starting to look like action potentials. It has been suggested11 that bioelectric phenomena are an ancient mechanism to control growth and form, possibly predating cells themselves. Transduction of energy to overcome disorder through growth of organized structures would seem to be a prerequisite for early life, and at least in its electric signals, the acTAM starts to demonstrate how those early growth mechanisms may have contributed to the development of complex biological shape and function.
In this paper, the acTAM is monotonic, i.e. once a tile attaches, it cannot detach. Nevertheless, extensions to the acTAM are possible that allow detachment. In order for growth to proceed, the model would have to incorporate forward and reverse reaction rates that would determine the extent of the growth, with this cTAM representing a kind of abstract non-equilibrium thermodynamics that might lend itself to quantitative analysis. Certainly, a series of attachment and detachment events would produce even more complex electric signals and growth behavior.
In conclusion, the acTAM abstracts and is equivalent to other other models of bioelectric networks7,8,9 and offers the potential to uncover deep clues on the etiology of biological structure formation (shape and dynamics). For example, what really controls and limits growth is access to environmental resources and the coupling between components and the environment. It also captures mechanisms that couple growth and electrical signaling in axon-like networks with predictive capability for both length and electrical response. These models also provide full and realistic examples of the well known property of autopoiesis33, in which the structure of an organism is determined and preserved by, not in spite of, interaction between components and the environment. Furthermore, the model itself (although not the analysis) is relatively simple and so affords the possibility of models for more complex and realistic phenomena (proteins and neuronal assemblies) in which the representation of matter is less abstract than in conventional models and closer to direct electrical phenomena. These properties would also allow the possibility of providing a more objective and systematic framework to address issues such as homeostasis, self-healing, and other epigenetic biological phenomena as emergent properties34,35 rather than being explicitly programmed.
The datasets used and/or analysed during the current study available from the corresponding author on reasonable request. These include Mathematica programs that were used to generate simulation data for figures.
Funk, R. H. Endogenous electric fields as guiding cue for cell migration. Front. Physiol. 6, 143 (2015).
Article  Google Scholar 
Tyler, S. E. B. Nature’s electric potential: A systematic review of the role of bioelectricity in wound healing and regenerative processes in animals, humans, and plants. Front. Physiol. 8, 627 (2017).
Article  Google Scholar 
Robinson, K. R. & Messerli, M. A. Left/right, up/down: The role of endogenous electrical fields as directional signals in development, repair and invasion. BioEssays News Rev. Mol. Cell. Developmental Biol. 25, 759–766 (2003).
Article  Google Scholar 
Spitzer, N. C. Electrical activity in early neuronal development. Nature 444, 707–712 (2006).
ADS  CAS  Article  Google Scholar 
Canales, J., Henriquez-Valencia, C. & Brauchi, S. The integration of electrical signals originating in the root of vascular plants. Front. Plant Sci. 8, 2173 (2018).
Article  Google Scholar 
Agudelo, C., Packirisamy, M. & Geitmann, A. Influence of electric fields and conductivity on pollen tube growth assessed via electrical lab-on-chip. Sci. Rep. 6, 19812 (2016).
ADS  CAS  Article  Google Scholar 
Levin, M. Endogenous bioelectrical networks store non-genetic patterning information during development and regeneration. J. Physiol. 592, 2295–2305 (2014).
CAS  Article  Google Scholar 
Pietak, A. & Levin, M. Bioelectric gene and reaction networks: Computational modelling of genetic, biochemical and bioelectrical dynamics in pattern regulation. J. R. Soc. Interface 14(134), 20170425 (2017).
Article  Google Scholar 
Srivastava, P., Kane, A., Harrison, C. & Levin, M. A meta-analysis of bioelectric data in cancer, embryogenesis, and regeneration. Bioelectricity 3(1), 42–67 (2021).
Article  Google Scholar 
Manicka, S. & Levin, M. Modeling somatic computation with non-neural bioelectric networks. Sci. Rep. 9, 18612 (2019).
ADS  CAS  Article  Google Scholar 
Levin, M. & Martyniuk, C. J. The bioelectric code: An ancient computational medium for dynamic control of growth and form. Bio Syst. 164, 76–93 (2018).
Google Scholar 
E. Winfree, Algorithmic self-assembly of DNA. PhD thesis, California Institute of Technology, June 1998.
E. Winfree and P. Rothemund, The program-size complexity of self-assembled squares, in STOC ’00: Proceedings of the thirty-second anual ACM symposium on Theory of Computing, (New York), pp. 459–468, ACM, ACM Press, 2000.
Winfree, E., Liu, F., Wenzler, L. A. & Seeman, N. C. Design and self-assembly of two-dimensional DNA crystals. Nature 394, 539–544 (1998).
ADS  CAS  Article  Google Scholar 
Deaton, R., Garzon, M., Yasmin, R. & Moore, T. A model for self-assembling circuits with voltage-controlled growth. Int. J. Circ. Theory Appl. 48(7), 1017–1031 (2020).
Article  Google Scholar 
Yasmin, R., Garzon, M. & Deaton, R. Model for self-replicating, self-assembling electric circuits with self-controlled growth. Phys. Rev. Res. 2, 033165 (2020).
CAS  Article  Google Scholar 
Yan, Y., Garzon, M. & Deaton, R. Harmonic circuit self-assembly in cTAM models. IEEE Trans. Nanotechnol. 18, 195–199 (2019).
ADS  CAS  Article  Google Scholar 
Yan, Y., Garzon, M. & Deaton, R. Self-assembly of 2-d resistive electric grids. IEEE Trans. Nanotechnol. 18, 562–566 (2019).
ADS  CAS  Article  Google Scholar 
Wells, D. A. The Science of Common Things: A Familiar Explanation of the First Principles of Physical Science. For Schools, Families, and Young Students, Ivison, Phinney, Blakeman, 1859, p. 290. This work is in the public domain in its country of origin and other countries and areas where the copyright term is the author’s life plus 70 years or fewer.https://commons.wikimedia.org/wiki/File:Galvani-frogs-legs-electricity.jpg. Accessed 5 July 2020.
Wheeler, R. (Zephyris). 2007. B-/Z-DNA junction bound to a Z-DNA binding domain. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License. https://commons.wikimedia.org/wiki/File:B-,_Z-DNA_junction_2ACJ.png. Accessed 5 July 2020.
Nrets. (2008). This file is licensed under the Creative Commons Attribution-Share Alike 3.0 Unported license. https://commons.wikimedia.org/wiki/File:MembraneCircuit.jpg. Accessed 5 July 2020.
B. Blausen. (2013). This file is licensed under the Creative Commons Attribution-Share Alike 3.0 Unported license. https://commons.wikimedia.org/wiki/File:Blausen_0657_MultipolarNeuron.png. Accessed 5 July 2020.
Scott, A. C. The electrophysics of a nerve fiber. Rev. Mod. Phys. 47, 487–533 (1975).
ADS  Article  Google Scholar 
Hodgkin, A. L. & Huxley, A. F. A quantitative description of membrane current and its application to conduction and excitation in nerve. J. Physiol. 117, 500–544 (1952).
CAS  Article  Google Scholar 
Debanne, D. Information processing in the axon. Nat. Rev. Neurosci. 5, 304–316 (2004).
CAS  Article  Google Scholar 
Alcami, P. & El Hady, A. Axonal computations. Front. Cell. Neurosci. 13, 413 (2019).
CAS  Article  Google Scholar 
Zhang, X., Pan, L. & Paun, A. On the universality of axon p systems. IEEE Trans. Neural Netw. Learn. Syst. 26, 2816–2829 (2015).
MathSciNet  Article  Google Scholar 
Ibarretxe, G., Perrais, D., Jaskolski, F., Vimeney, A. & Mulle, C. Fast regulation of axonal growth cone motility by electrical activity. J. Neurosci. 27(29), 7684–7695 (2007).
CAS  Article  Google Scholar 
Goldberg, J. L. Role of electrical activity in promoting neural repair. Neurosci. Lett. 519, 134–137 (2012).
CAS  Article  Google Scholar 
Yueh, W.-C. Eigenvalues of several tridiagonal matrices. Appl. Math. E-Notes 5, 66–74 (2005).
MathSciNet  MATH  Google Scholar 
Kagan, M. On equivalent resistance of electrical circuits. Am. J. Phys. 83(1), 53–63 (2015).
ADS  Article  Google Scholar 
M. Kagan & X. Wang. Infinite circuits are easy. How about long ones? arXiv:1507.08221 [physics.gen-ph] https://doi.org/10.48550/arXiv.1507.08221(2015).
H. R. Maturana & F. J. Varela. Autopoiesis and Cognition: The Realization of the Living, vol. 42 of Boston Studies in Philosophy of Science. (D. Reidel Pub. Co., Dordrecht, 1972).
Sosik, P., Garzon, M., Smolka, V. & Drastik, J. Morphogenetic systems for resource bounded computation and modeling. Inform. Sci. 547, 814–827 (2021).
MathSciNet  Article  Google Scholar 
Garzon, M., Sosik, P., Drastik, J. & Skalli, O. A self-controlled and self-healing model of bacterial cells. Membranes 12, 678–694 (2022).
CAS  Article  Google Scholar 
Download references
Department of Electrical and Computer Engineering, University of Memphis, Memphis, TN, 38152, USA
Russell Deaton & Rojoba Yasmin
Department of Computer Science, University of Memphis, Memphis, TN, 38152, USA
Max Garzon
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
R.D., M.G., and R.Y. made substantial contributions to the conception of the acTAM model. R.D. drafted the work and M.G. substantively revised it. R.Y. confirmed the model with simulations.
Correspondence to Russell Deaton.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Deaton, R., Garzon, M. & Yasmin, R. Systems of axon-like circuits for self-assembled and self-controlled growth of bioelectric networks. Sci Rep 12, 13371 (2022). https://doi.org/10.1038/s41598-022-17103-4
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-17103-4
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Advanced search
Scientific Reports (Sci Rep) ISSN 2045-2322 (online)
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

source

Thermodynamics of organic electrochemical transistors – Nature.com

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Nature Communications volume 13, Article number: 4514 (2022)
480 Accesses
1 Altmetric
Metrics details
Despite their increasing usefulness in a wide variety of applications, organic electrochemical transistors still lack a comprehensive and unifying physical framework able to describe the current-voltage characteristics and the polymer/electrolyte interactions simultaneously. Building upon thermodynamic axioms, we present a quantitative analysis of the operation of organic electrochemical transistors. We reveal that the entropy of mixing is the main driving force behind the redox mechanism that rules the transfer properties of such devices in electrolytic environments. In the light of these findings, we show that traditional models used for organic electrochemical transistors, based on the theory of field-effect transistors, fall short as they treat the active material as a simple capacitor while ignoring the material properties and energetic interactions. Finally, by analyzing a large spectrum of solvents and device regimes, we quantify the entropic and enthalpic contributions and put forward an approach for targeted material design and device applications.
Organic mixed ion-electron conductors (OMIECs)1,2 emerged as an ideal class of materials for bioelectronic applications, both in-vivo and in-vitro. The attention to OMIECs stems from a reversible and energy-efficient redox mechanism that allows controlling the charge carrier density of the material. These appealing features, absent in traditional organic and inorganic electronic devices, have been harnessed to design human-compatible electronics, e.g., circuits that can be implanted within an organism and interact with tissues, neurons, blood, etc.3,4,5. The most prominent device based on OMIECs is the organic electrochemical transistor (OECT)6, whereby a gate electrode is employed to flood or deplete the OMIEC with ionic species, therefore switching on and off its conductivity. The traditional OECT architecture, sketched in Fig. 1a, has been employed for a broad spectrum of applications of technological interest as proven by the number of successful demonstrations of OECT-based devices for biosensors7, artificial synapses8,9, hardware capable of computing10,11,12, and wearable electronics for biofluid and biosignal monitoring3,13,14. More recently, the application scope of OECTs has been further expanded, entering dry electronics: using solid electrolytes, OECT-based devices were shown to be an excellent candidate for non-volatile memories15 as well as a good alternative to traditional low-cost organic and inorganic digital circuitry16,17. This multifaceted range of applications demands a detailed understanding of the physical and chemical processes underlying the OECT operation, as well as comprehensive electronic modeling. In their seminal paper, Bernards et al. borrowed the mathematical framework of thin-film field-effect transistors (FETs)18 to describe the channel current Id as a function of the gate voltage Vgs and drain voltage Vds of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS)-based OECTs, according to
where Vp is the pinch-off voltage defined as Vp = eρ0/C*, Λh is the hole mobility (we chose this uncommon notation to avoid confusion with the chemical potential μ extensively used below), C* is the volumetric capacitance, ρ0 is the intrinsic charge carrier density, e is the elementary charge, and t, W, and L are the geometrical channel thickness, width, and length. Bernards model is an elegant and often used framework to describe the operation OECTs. However, it does not allow for an accurate quantitative analysis of the important figures of merit of OECT operation (e.g., transconductance, saturation in on- and off-state, subthreshold behavior, etc.), nor for qualitative description of the OECTs IV curves, such as the peculiar S-shaped transfer curve, especially for high-performance devices. The latter, is the result of an electrochemical, rather than electrostatic, charging mechanism mediated by the redox reaction
Figure 1 shows how such a reaction is reflected in the electrical properties of the PEDOT when a gate voltage is applied.
a Typical setup for the IV measurement of an OECT using a non-polarizable Ag/AgCl pellet as a gate electrode. Such setup is used throughout this work too. b Redox reaction driving the operation of OECTs. The amount of oxidized and reduced PEDOT leads to the transfer curve sketched below. c Key difference between the FET-based model for OECTs and our thermodynamic model: the nonlinear charge accumulation resulting from the Gibbs free energy, in strong contrast with a linear accumulation typical of a capacitor.
In order to address these discrepancies, several approaches have been proposed to extend Bernards model, usually adding parameters that capture OECT-specific properties not seen in conventional FETs, e.g., ion concentration-dependent mobility19, disorder20, or ion diffusion21. Bernards model and its extensions rely on the assumption that the accumulated ions in the channel can be calculated as a simple parallel-plate capacitor, similar to a metal-oxide-semiconductor FET, but experimental evidence shows a marked nonlinear potential-dependent capacitance, as shown in Supplementary Fig. 1 and ref. 22. Moreover, the chemistry behind the redox process leading to the OECT switching is not taken into account: electrostatic interactions alone cannot comprehensively describe a redox reaction and therefore cannot explain the basic mechanism that underlies the OECT operation. A few studies put forth the idea, or the necessity, to investigate the metal/electrolyte/polyelectrolyte system on a thermodynamic basis, therefore rendering the purely electrostatic picture insufficient23. For example, thermodynamic notions (Nernst law and Boltzmann statistics) need to be integrated into the model in order to describe the concentration-dependent threshold voltage exploited in OECTs for ion sensing7,24. Romele et al.25 investigated the transport properties of OMIECs and observed that the channel resistance and capacitance are independent of the electrolyte concentration, in contrast to the double-layer theory. This ionic buffering is explained in terms of Donnan’s equilibrium. Tybrandt et al.26 reasoned in terms of the chemical potential of the charged species within the polymeric channel: their study results in accurate numerical drift-diffusion simulations and in the key observation that polyelectrolyte/conductive polymer blends should be viewed as two-phase materials. Rebetez et al. investigated the temperature-dependence of the reaction equilibrium that drives the polaron and bipolaron formation and revealed the importance of entropy in the establishment of the redox equilibrium27. These approaches highlight physical and chemical mechanisms behind the charging dynamics of OECTs and provide good tools to understand the interaction at the gate/electrolyte and electrolyte/polymer interface. However, a fully-developed mathematical framework capable of reproducing experimental data while considering the material properties was never proposed. A number of empirical models and numerical simulations were also proposed23,28,29. A detailed overview of the mathematical models of OECTs and their evolution over time was recently reported by Colucci et al.30.
Here, we propose a universal approach derived from thermodynamic axioms capable of explaining a plethora of OECT and OMIEC properties in a variety of applications. We argue that, although FET models can provide a useful and convenient tool to investigate the properties of OECTs, they fail in giving a realistic physical and chemical picture of the system. Instead, we reason in terms of chemical equilibrium and electrochemical potential. Key in our approach is the fact that we do not rely on the direct proportionality between applied voltage and accumulated charge typical of a parallel-plate capacitor. Rather, a nonlinear voltage-dependent charge accumulation (Fig. 1c) naturally derives from the treatment of the Gibbs energy. We analyze the equilibrium that establishes between the conductive polymer and electrolyte, and how the gate-source voltage perturbs it. In doing so, key features of OECTs naturally emerge from the math without artificial parametrization. For example, previously overlooked peculiarities of OECTs, such as saturation in the on-state and the strong voltage-dependent capacitance are intrinsically captured by our model, and so is the effect on the device performance based on the doping level.
We support our findings with experimental data employing PEDOT:PSS (the most widely employed OMIEC) OECTs as a reference system, and with numerical simulations. We capitalize on the investigation and quantification of intrinsic material properties such as the interactions occurring between the polymer and ions mediated by the solvent.
When a PEDOT:PSS film is immersed in an aqueous electrolytic solution (e.g., NaCl in H2O), the polymeric matrix swells, and ions can penetrate. Cations act as dedopants, reducing a fraction of the existing polarons PEDOT+ into PEDOT0 according to Eq. (2). This process happens spontaneously, without the need for external forces (e.g., a gate potential), and it is proven by the conductance lowering of PEDOT:PSS when going from salt-free solvents to the electrolytic environment. Interestingly, the resulting amount of Na:PSS is independent of the concentration of salt in the bulk electrolyte, as shown experimentally by Romele et al.25. This appears evident looking at the equilibrium constant keq
where the activity of the electrons provided by the electrodes is considered unitary. Here, [PEDOT 0] is the percentage of PEDOT that reduces after the PSS moiety pairs with a cation, and [PEDOT +] is the percentage of PEDOT in its oxidized state. Since the sum [PEDOT 0]+[PEDOT +] = 1 is constant, and so are the temperature and the pressure, we treat the system as a canonical ensemble with two phases31. Eq. (3) provides a bridge between a chemical picture of the system, since it describes the chemical reaction, and an electronic picture, because it quantifies the doping level at a certain temperature. Hence, we use it as starting point for our analysis. We set out this investigation with the definition of Gibbs free energy G, of a chemical reaction, and by treating the channel as a binary mixture of the two species. The definition of Gibbs energy of a binary mixture is
where H is the enthalpy, T is the temperature, and Smix is the entropy of mixing. In the simplest approximation, the enthalpy of mixing Hmix is neglected and the only contribution to the enthalpy is H0, namely the sum of the enthalpies of the pure PEDOT 0 and of pure PEDOT + with the corresponding chemical potentials μp0 and μp+, respectively31. By defining ϕ as the relative concentration of reduced PEDOT, defined as
which spans from 0 (purely oxidized phase) to 1 (fully reduced phase), we can describe the entropy of mixing31. Accordingly, Eq. (4) becomes
Where kB is the Boltzmann constant. Eq. (6) is plotted in Fig. 2a for different temperatures. It is important to point out that the free energy of the whole system (electrolyte + OMIEC) should also take into account the free energy of the electrolyte Ge, and not only the one of the OMIEC. When ions migrate from the electrolyte into the polymer, a ΔGe may be expected. However, such change is negligible as calculated in Supplementary Note 1. Therefore, Ge is a constant, allowing us to calculate the variation of G only on the OMIEC, as well as calculate the derivative (see next section) without incurring an error.
a Temperature and ϕ dependence of the Gibbs free energy (with Hmix = 0, using ({mu }^{{p}^{+}}=-60 ;{{{{{rm{meV/mol}}}}}}) and ({mu }^{{p}^{0}}=0)). Higher temperatures shift the minimum towards ϕ0 = 0.5 and to lower energies. b Measurement of the current flowing in a PEDOT:PSS thin-film at a different temperatures, in deionized water (DIW) and saltwater DIW:NaCl 100 mM (circles). Curves are fitted with a linear regression (solid lines). The experiment in DIW (see Methods for details) is used to estimate the contribution of the temperature-dependent mobility, which is then subtracted, leading to the blue dashed line. The same contribution is subtracted from the current measured in DIW:NaCl. The negative slope shows that, besides the increased mobility, the doping density is lowered. Note that at room temperature, the current drops by 8% with respect to when it is in distilled water (DIW), hence ϕ0(T = 300 K) = 0.08. c Calculated concentration of reduced PEDOT0 and doped/oxidized PEDOT+ in the film at different temperatures.
Since the pure phases are entropically unfavorable, the systems’ equilibrium at a certain temperature lies in its energetic minimum characterized by the coordinates ϕ0 and G0. ϕ0 can be found by measuring the conductance of a PEDOT:PSS film in deionized water (DIW) and in saltwater. The current flowing through a film of PEDOT:PSS is given by
where [PSS−] is the concentration of PSS in PEDOT:PSS (in m−3), and it is the maximum charge carrier density that the film can reach (when ϕ = 0). This happens in DIW, where in absence of a reducing agent (ϕ = 0) the charge density is [PSS−]. Thus, by varying the temperature of the solution, the temperature dependence of the hole mobility Λh(T) is found. This is shown in Fig. 2b, where a linear increase of the conductance is obtained, with a slope of 1.9 μA/K We ascribe it to a temperature-activated hopping mechanism, typical in conductive polymers. The situation is different in NaCl(aq) where both ϕ and Λh are expected to vary with temperature. Again, a linear increase is observed. However, the slope is 1.4 μA/K, 26% lower than in DIW. By assuming Λh(T) is the same for PEDOT:PSS in DIW and NaCl(aq), the difference must lay in the different charge carrier concentrations. We can therefore calculate ϕ(T), reported in Fig. 2c. In doing so, we are considering the hole mobility to be independent of the ion concentration. Although the mobility may depend on the doping concentration, Friedlein et al. showed that its effect is weak and should not compromise our results in the small range of dedoping level i.e., from 8% to 11.5%19. Accordingly, the doping level (defined as 1–ϕ) decreases, revealing that the cation concentration within PEDOT:PSS increases as a consequence of increased entropy of mixing.
A temperature-dependent doping concentration, linked to a higher entropic contribution (ϕ0 → 0.5 for T → ∞) is compatible with a thermodynamic picture. We now aim to generalize the mathematical framework in order to describe the behavior of PEDOT:PSS in the presence of an external gate electrode, hence, an OECT.
Our mathematical analysis is outlined in Fig. 3a and proceeds as follow: firstly, the equilibrium state of the reaction is analyzed (blue panel); eventually, by applying an external voltage, the equilibrium is perturbed and the electrochemical potential must be introduced (yellow panel). the Gibbs energy can be employed, by deriving with respect to ϕ, to obtain the chemical potential μ
μ is plotted in Fig. 3a for different temperatures. The equilibrium state, characterized by μ0 = μ(ϕ0) = 0, can be altered by an external stimulus e.g., an electrical (gate) potential Vgs, hence introducing the electrochemical potential in the channel (bar{mu })
with Vch being the potential in the channel, which depends on the drain-source voltage Vds according to Eq. Supplementary Eq. 4. By plugging Eq. (9) into Eq. (8), and integrating Eq. (7) over the channel length (refer to Supplementary Note 2 for the full procedure), we obtain the following expression for the current Id flowing in the OECT channel for a given T, Vds, and Vgs
where β = e/kBT is the ratio of the elementary charge to thermal energy and (Z=exp (frac{{mu }^{p+}-{mu }^{p0}}{{k}_{B}T})) is a material-dependent constant that includes the chemical potential of the unmixed species. In doing so, the crucial point distinguishing this model from FET-based models is the calculation of the accumulated charge in the channel: the charge accumulation is not directly proportional to the gate-source voltage as in a plate capacitor model. Rather, it is a nonlinear function of the gate potential (see Fig. 1c) that is derived directly from the equilibrium constant in Eq. (3). Under the condition that Hmix = 0, i.e., particle-particle interactions are neglected. While this seems a far-reaching simplification, it shines a light on some basic features of OECTs as can be seen in the output and transfer characteristics plotted in Fig. 4. Firstly, Eq. (10) includes the linear proportionality with the geometric parameters of the channel and with the hole mobility, as in the Bernards model. In contrast to it, it does not feature capacitance, underscoring the fact that we did not consider the system as a plate capacitor. Additionally, unlike traditional FETs, the equation does not need to be split between linear and saturation regimes. Rather, the dependence of Vd becomes weaker as Vg becomes more negative, and the saturation at large drain voltages is inherently captured. Moreover, it reproduces the saturation in the off-state (due to the complete PEDOT reduction (ϕ = 1) as well as the saturation in the on-state (complete oxidation (ϕ = 0)) as shown in Fig. 3a. The latter was never described in previous theories for OECTs. From a thermodynamic standpoint, μ(ϕ = 0) → − ∞ and μ(ϕ = 1) → + ∞. This means that huge changes in chemical potential i.e., large variation of Vgs, bring about small changes in cation concentration, hence saturation of the drain current. Finally, this model confirms a shift of the threshold voltage at different temperatures32 and foresees that, at room temperature, a gate voltage of <1 V is needed to drive a PEDOT:PSS-based OECT from the on-state to the off-state, in good agreement with state-of-the-art OECTs. In Fig. 3b, c, the transfer characteristics are fitted with the thermodynamic model and compared to the traditional FET-based model (Bernards model), revealing a much better agreement with experimental data even for the simplistic model without particle-particle interactions. In Fig. 2 the same curves are reported on a logarithmic scale. Nevertheless, we stress that this model does not aim to describe the properties of the channel for currents below the threshold voltage, where the leakage current becomes non-negligible and diffusion currents may play an important role. Moreover, decoupling thermodynamic and kinetic effects is a challenging task. To this end, each voltage sweep was performed very slowly (1 V/min) to ensure that the system is always at equilibrium. This is a “static” model, and the description of transient effects may go beyond the thermodynamic approach.
a Step-by-step workflow of our thermodynamic analysis. Starting with the Gibbs energy G, the chemical potential μ can be obtained. These properties are material-specific and by measuring the resistance of the PEDOT/electrolyte system only the equilibrium can be probed. By applying an external field, the equilibrium is perturbed (yellow box), and the current-voltage characteristics can be obtained as explained in the main text and in Supplementary Note 2. The pink and blue spheres indicated a fully oxidized and fully reduced PEDOT phase, respectively. b Transfer characteristics of a PEDOT:PSS OECT with a channel of 100 mM aqueous NaCl solution at Vds = −0.6 V and −0.3 V. The experimental curves (red circles) have been fitted (solid lines) with b the FET-based model (Bernards model), c with the thermodynamic model in the assumption of Hmix = 0, and d with the thermodynamic model including the enthalpy of mixing. The device features W = 50 μm, L = 200 μm, t = 200 nm. The parameters for the fits are: Vp = 0.57 V and ΛhC = 40 F/cm/s/V for the FET model. For the scenario with Hmix = 0: ({mu }^{{p}^{+}}+{mu }^{{p}^{0}}=1cdot 1{0}^{-21}J), Λh[PSS−] = 1.06 × 1022 C/cm2/s/V, T = 300K, and α = 0.2 (see Eq. Supplementary Eq. 14). When adding the enthalpy: h1 = 0.20, h2 = 0.18, h3 = 0.20.
Investigation of the chemical potential and free energy underlying the transfer characteristics of an OECT immersed in a 100 mM NaCl aqueous solution, b 100 mM KCl aqueous solution, c ionic liquid, d 100 mM LiClO4 in butanol, and e 100 mM LiClO4 in water. Experimentally determined curves with Vds = 5 mV (circles) are fitted with the blue solid curves. The histograms on the right display the parameters used for the fits. In Supplementary Table 1 the values and the errors of the parameters used for the fits are reported, together with the fitting procedure. All energies are in kBT units.
In order to achieve better quantitative agreement with experimental data, we must go beyond the interaction-free approximation and allow for enthalpic contributions Hmix arising from the interaction between reduced PEDOT pairs (interaction parameter h1), between oxidized PEDOT pairs (interaction parameter h2), or between each other (interaction parameter h3) using the following term describing interactions as
Differently from the previous scenario, ϕ(μ) cannot be explicated if Hmix ≠ 0. We need to resort to numerical solutions for the integration in Eq. Supplementary Eq. 7 plotting and data fitting (see Supplementary Note 3 for the full code). With this method, we fit the transfer characteristics as shown in Fig. 3d: the agreement with experimental data is striking and decisively improving with respect to the scenario with Hmix = 0.
The presence of underlying S-shaped chemical potential can be directly probed by measuring a transfer curve for Vds → 0 (See Eq. Supplementary Eq. 10). Lowering the drain-source voltage to such a low value (5 mV in our experiments) makes the channel potential homogeneous and, mathematically speaking, compresses the integral along the channel length to a point (See Supplementary Fig. 3). We do this for a number of material combinations, fit the data, and analyze the parameters used for the modeling.
For example, using larger cations (K instead of Na as in Fig. 4a, b), the charges are forced to stay farther away, lowering the Coulomb interaction energy (which we believe is mainly reflected in the decrease of the interaction parameters h1, h2, and h3). Moreover, different solvents can be used to validate the model. If a water-free solvent is used, the enthalpy of mixing is larger than in the case of water. This is visible when employing an ionic liquid (Fig. 4c) or butanol (Fig. 4d) as electrolyte. Figure 4d, e compare OECTs immersed in a solution of 100 mM LiClO4, first in butanol and then in water. Water, with its higher dielectric constant, significantly lowers the contribution of Hmix, again reflected in the decrease of the interaction parameters.
Besides the trend, it is worth discussing the absolute values of the Hmix contribution: its magnitude is a small correction to the interaction-free scenario with Hmix = 0. This may be surprising as the electrostatic interaction that arises between holes, cations, and polyelectrolyte may make a larger effect be expected. This apparent paradox is readily resolved by reasoning in terms of energy variation ΔG: in the fully oxidized phase, the PSS dopants are paired with positively charged polarons. When cations are injected, they replace the polaronic charge without altering dramatically the energetic landscape. This process is sketched in Supplementary Fig. 5. Therefore, the driving force behind the operation of an OECT is entropy, with small perturbations coming from the enthalpic terms. Therefore, for targeted material design, the entropic term must be addressed in order to change the device’s figures of merits decisively.
The thermodynamic model offers a way to understand OMIECs and OMIEC-based devices, as well as a pathway for intelligent device engineering and material design. The very fact that chemical equilibrium is at the core of the operation of an OECT (i.e., the system lies at the minimum of the Gibbs energy function), leads to a transconductance that is highest for Vgs = 0, which is an excellent feature for possible self-powered devices. Note that this is true only if the drain voltage approaches zero, and there may be an additional shift due to the reaction at the gate/electrolyte interface. Therefore, minimizing the channel length ensures a high on-state current despite the low Vds used. Moreover, the same approach (low Vds, small L), allows for an easier mathematical analysis of the entropic e enthalpic analysis and fitting and should be used to compare different OECTs.
As discussed above, the entropic term dominates the enthalpic, giving the OECTs a dissimilar behavior when compared to traditional FETs and OFETs. Unfortunately, the entropic term is also very challenging to tune, posing the difficult question of how to improve the device’s performance. On the contrary, one can change the enthalpic term more easily by employing different ions and solvents, although these may be dictated by the application. In general, by decreasing the enthalpic contribution h1 and h2, as well as increasing h3, the resulting transconductance of the device can be increased. This can be seen by solving numerically Eq. (4).
Another point to pay attention to is the type of material used. Our measurements have been carried out using PEDOT:PSS channels. We believe, however, that the model it can be extended to any type of depletion mode OECTs in which a scheme analogous to the one in Supplementary Fig. 5 applies. However, novel OMIECs allow for accumulation mode OECTs, where the species in the off-state may be fully neutral (i.e., only the neutral polymer without any dopant), and only in the on-state ions generate charge carriers. On the one hand, the model cannot be readily interpreted for accumulation mode OECTs. On the other hand, the theory is not material-specific but rather universal. The basic features deriving from the thermodynamic model e.g. S-shaped transfer curves, bell-shaped transconductance, and transition from on- to off-state in the range of 1 V33,34 still apply to such devices, suggesting that the model may be applied to them as well. In doing so, one must adjust the initial equations and take into account the fact that the device may be off-state when is doped (See Supplementary Eq. 11).
A thermodynamic analysis of the OECTs is presented. Our approach stands on general thermodynamic axioms and leads to a comprehensive, compact, and quantitative framework capable of describing the current-voltage characteristics of such devices and how these arise from the interactions of the material. We reveal that the main driver in the switching of the OECT is the entropy of mixing, in strong contrast with traditional models based on purely electrostatic effects. By measuring the channel current at very low drain voltages, we are able to quantify the enthalpic term of the total free energy, and conclude that it only represents a minor contribution when compared to the entropy (1–10% depending on the system). We also highlight that some important advantages of OECTs, e.g., high transconductance and low voltage operation, are purely a consequence of such thermodynamic features. Our model allows excellent fitting of experimental transfer curve and leads to the conclusion that a model based purely on electrostatic interactions, like the ones typically used, is insufficient to interpret experimental data correctly and unravel chemical and physical interaction of the material with the ions. In fact, the electrostatic (enthalpic) contribution is minor and we quantified it across a large range of materials. Our approach can be used for a better understanding of the physical and chemical interactions that drive the operation of OECTs, as well as a precise guideline for targeted material modeling and engineering.
OECTs were fabricated on 1 × 1 inch glass substrates covered with Cr (3 nm) and Au (50 nm). The photoresist AZ 1518 (MicroChemicals GmbH) was spin-coated (3000 rpm for 60 s; SAWATEC AG), followed by baking at 110 °C for 60 s. Gold traces were shaped by illuminating in a mask aligner photolithography system (I-line 365 nm, lamp power 167 W, SUESS Microtec AG) for 10 s, photoresist developing (AZ 726 MIF, MicroChemicals GmbH), and Au- and Cr-etching for 60 s and 20 s (10% diluted aqueous solutions of Standard Gold/Chromium etchants, Merck KGaA). After O2-plasma cleaning, PEDOT:PSS (Clevios PH1000, Heraeus Deutschland GmbH & Co. KG) with 5% v/v ethylene glycol (Merck KGaA) was spin-coated (2000 rpm for 60 s) to yield an ~200 nm thick layer. This step was followed by drying at 120 °C for 20 min. Orthogonal photoresist OSCoR 5001 (Orthogonal Inc.) was spin-coated (3000 rpm for 60 s), baked for 60 s at 100 °C, and exposed for 12 s to structure channel and gate. After post-baking (60 s at 100 °C), development followed by covering the sample with Orthogonal Developer 103a (Orthogonal Inc.) and removing it by spinning after 60 s (twice). Excess PEDOT:PSS was removed by O2-plasma etching (5 min, 0.3 mbar, Diener electronic GmbH & Co. KG), after which the sample was placed in Orthogonal Stripper 900 (Orthogonal Inc.) overnight at room temperature. Electrical characterizations were performed using Keithley 2600 SMUs controlled by the software SweepMe! (sweep-me.net) with the PEDOT:PSS film immersed in 100 mM water:NaCl. The transfer curves were measured slowly (1 V/min) using an Ag/AgCl pellet as a gate in order to ensure the system operated at equilibrium and so minimized transient and hysteretic behaviors. After a preliminary test to establish where the saturation in the on and off states occurred, the measurement was carried out from the on-state to the off-state. The temperature-resolved measurement was carried out with the device immersed in a beaker filled with water and NaCl 100 mM, with the beaker on top of a hotplate, and a thermocouple attached to the substrate. A voltage of 10 mV was applied constantly, while temperature and current were controlled with a parameter analyzer Keythley interfaced with the software SweepMe! (sweep-me.net). Numerical simulations were coded in Matlab, code in Supplementary Note 3. In Fig. 4, The experimental I–V transfer curves are transformed into a μ − ϕ as explained in Supplementary Note 2. This is possible only because the curves are measured at vanishing drain voltage. By integrating the chemical potential, the Gibbs free energy is obtained, which is the curve on which the fit is carried out. In order to measure a significant current even with very small Vd (5 mV), the channel was patterned to be wide and short: L = 50 μm, W = 500 μm.
Data available on request from the authors or downloadable from https://osf.io/dufsz/?view_only=e884dff34dc646599f95ae02a44d42ce.
Codes are included in the Supplementary Information (Note S3). For more information please contact the corresponding author.
Paulsen, B. D., Tybrandt, K., Stavrinidou, E. & Rivnay, J. Organic mixed ionic–electronic conductors. Nat. Mater. 19, 13–26 (2020).
ADS  CAS  PubMed  Article  Google Scholar 
Rivnay, J., Owens, R. M. & Malliaras, G. G. The rise of organic bioelectronics. Chem. Mater. 26, 679–685 (2014).
CAS  Article  Google Scholar 
Khodagholy, D. et al. In vivo recordings of brain activity using organic transistors. Nat. Commun. 4, 1–7 (2013).
Google Scholar 
Strakosas, X., Bongo, M. & Owens, R. M. The organic electrochemical transistor for biological applications. J. Appl. Polym. Sci. 132, 41735 (2015).
Leleux, P. et al. Organic electrochemical transistors for clinical applications. Adv. Healthc. Mater. 4, 142–147 (2015).
CAS  PubMed  Article  Google Scholar 
Rivnay, J. et al. Organic electrochemical transistors. Nat. Rev. Mater. 3, 1–14 (2018).
Article  Google Scholar 
Lin, P., Yan, F. & Chan, H. L. Ion-sensitive properties of organic electrochemical transistors. ACS Appl. Mater. Interfaces 2, 1637–1641 (2010).
CAS  PubMed  Article  Google Scholar 
Cucchi, M. et al. Directed growth of dendritic polymer networks for organic electrochemical transistors and artificial synapses. Adv. Electron. Mater. 2100586 (2021).
Ji, X. et al. Mimicking associative learning using an ion-trapping non-volatile synaptic organic electrochemical transistor. Nat. Commun. 12, 1–12 (2021).
ADS  Article  Google Scholar 
Van De Burgt, Y. & Gkoupidenis, P. Organic materials and devices for brain-inspired computing: from artificial implementation to biophysical realism. MRS Bull. 45, 631–640 (2020).
ADS  Article  Google Scholar 
Cucchi, M. et al. Reservoir computing with biocompatible organic electrochemical networks for brain-inspired biosignal classification. Sc. Adv. 7, eabh0693 (2021).
ADS  Article  Google Scholar 
Petrauskas, L. et al. Nonlinear behavior of dendritic polymer networks for reservoir computing. Adv. Electron. Mater. 8, 2100330 (2021).
Keene, S. T. et al. Wearable organic electrochemical transistor patch for multiplexed sensing of calcium and ammonium ions from human perspiration. Adv. Healthc. Mater. 8, 1901321 (2019).
CAS  Article  Google Scholar 
Campana, A., Cramer, T., Simon, D. T., Berggren, M. & Biscarini, F. Electrocardiographic recording with conformable organic electrochemical transistor fabricated on resorbable bioscaffold. Adv. Mater. 26, 3874–3878 (2014).
CAS  PubMed  Article  Google Scholar 
van de Burgt, Y. et al. A non-volatile organic electrochemical device as a low-voltage artificial synapse for neuromorphic computing. Nat. Mater. 16, 414–418 (2017).
ADS  PubMed  Article  Google Scholar 
Ersman, P. A. et al. All-printed large-scale integrated circuits based on organic electrochemical transistors. Nat. Commun. 10, 1–9 (2019).
Article  Google Scholar 
Weissbach, A. et al. Photopatternable solid electrolyte for integrable organic electrochemical transistors: operation and hysteresis. J. Mater. Chem. C 10, 2656–2662 (2022).
CAS  Article  Google Scholar 
Bernards, D. A. & Malliaras, G. G. Steady-state and transient behavior of organic electrochemical transistors. Adv. Funct. Mater. 17, 3538–3544 (2007).
CAS  Article  Google Scholar 
Friedlein, J. T., McLeod, R. R. & Rivnay, J. Device physics of organic electrochemical transistors. Org. Electron. 63, 398–414 (2018).
CAS  Article  Google Scholar 
Friedlein, J. T. et al. Influence of disorder on transfer characteristics of organic electrochemical transistors. Appl. Phys. Lett. 111, 023301 (2017).
ADS  Article  Google Scholar 
Gentile, F. et al. A theoretical model for the time varying current in organic electrochemical transistors in a dynamic regime. Org. Electron. 35, 59–64 (2016).
CAS  Article  Google Scholar 
Inal, S., Malliaras, G. G. & Rivnay, J. Benchmarking organic mixed conductors for transistors. Nat. Commun. 8, 1–7 (2017).
CAS  Article  Google Scholar 
Kaphle, V., Paudel, P. R., Dahal, D., Krishnan, R. K. R. & Lüssem, B. Finding the equilibrium of organic electrochemical transistors. Nat. Commun. 11, 1–11 (2020).
Article  Google Scholar 
Tseng, H., Cucchi, M., Weissbach, A., Leo, K. & Kleemann, H. Membrane-free, selective ion sensing by combining organic electrochemical transistors and impedance analysis of ionic diffusion. ACS Appl. Electron. Mater. 3, 3898–3903 (2021).
CAS  Article  Google Scholar 
Romele, P., Ghittorelli, M., Kovács-Vajna, Z. M. & Torricelli, F. Ion buffering and interface charge enable high performance electronics with organic electrochemical transistors. Nat. Commun. 10, 1–11 (2019).
CAS  Article  Google Scholar 
Tybrandt, K., Zozoulenko, I. V. & Berggren, M. Chemical potential–electric double layer coupling in conjugated polymer–polyelectrolyte blends. Sci. Adv. 3, eaao3659 (2017).
PubMed  PubMed Central  Article  Google Scholar 
Rebetez, G., Bardagot, O., Affolter, J., Réhault, J. & Banerji, N.What drives the kinetics and doping level in the electrochemical reactions of pedot: Pss? Adv. Funct. Mater. 32, 2105821 (2021).
Paudel, P. R., Kaphle, V., Dahal, D., Radha Krishnan, R. K. & Lüssem, B. Tuning the transconductance of organic electrochemical transistors. Adv. Funct. Mater. 31, 2004939 (2021).
CAS  Article  Google Scholar 
Szymański, M. Z., Tu, D. & Forchheimer, R. 2-d drift-diffusion simulation of organic electrochemical transistors. IEEE Trans. Electron. Devices 64, 5114–5120 (2017).
ADS  Article  Google Scholar 
Colucci, R., de Paula Barbosa, H. F., Günther, F., Cavassin, P. & Faria, G. C. Recent advances in modeling organic electrochemical transistors. Flex. Print. Electron. 5, 013001 (2020).
CAS  Article  Google Scholar 
Dill, K. A., Bromberg, S. & Stigter, D. Molecular driving forces: statistical thermodynamics in biology, chemistry, physics, and nanoscience (Garland Science, 2010).
Bongartz, L. M., Weissbach, A., Cucchi, M., Leo, K. & Kleemann, H. Temperature-dependence of all-solid-state organic electrochemical transistors. In 2022 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS), 1–4 (IEEE, 2022).
Pappa, A. M. et al. Direct metabolite detection with an n-type accumulation mode organic electrochemical transistor. Sci. Adv. 4, eaat0911 (2018).
ADS  PubMed  PubMed Central  Article  Google Scholar 
Inal, S. et al. A high transconductance accumulation mode electrochemical transistor. Adv. Mater. 26, 7450–7455 (2014).
CAS  PubMed  Article  Google Scholar 
Download references
We thank Dr. Ron Dockhorn for the fruitful conversations about the thermodynamics of conductive polymers. H.T. thanks the financial support from the European Social Fund (ESF) and the Free State of Saxony in the framework of OrgNanoMorph (project number: 100382168). L.M.B. and H.K. are grateful for funding from the German Research Foundation (DFG, KL 2961/5-1). A.W. thanks the project ESF Re-Learning (cfaed), ESF Number: 100382146.
Open Access funding enabled and organized by Projekt DEAL.
Laboratory for Soft Bioelectronic Interfaces, Neuro-X Institute, École Polytechnique Fédérale de Lausanne (EPFL), Geneva, Switzerland
Matteo Cucchi
Technische Universität Dresden, Dresden, Germany
Matteo Cucchi, Anton Weissbach, Lukas M. Bongartz, Richard Kantelberg, Hsin Tseng, Hans Kleemann & Karl Leo
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
M.C. originated the idea, developed the math, and designed the experiments. A.W., L.M.B., H.T., H.K., and K.L. equally contributed to the discussion. R.K. generated the code for the fits for the enthalpy of mixing.
Correspondence to Matteo Cucchi.
The authors declare no competing interests.
Nature Communications thanks the anonymous reviewers for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Cucchi, M., Weissbach, A., Bongartz, L.M. et al. Thermodynamics of organic electrochemical transistors. Nat Commun 13, 4514 (2022). https://doi.org/10.1038/s41467-022-32182-7
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-022-32182-7
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Advanced search
Nature Communications (Nat Commun) ISSN 2041-1723 (online)
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

source

‘The time is right’: reggae colossus Burning Spear on racism, rebellion and returning to Britain – The Guardian

He is the Jamaican legend who liberated reggae, taking it out of Kingston, drenching it in horns – and giving it a joyous, spiritual kick. As Burning Spear hits the road, he looks back on his astonishing life
It’s been two decades since Burning Spear set foot on a UK stage and almost as long since he took on anything that could qualify as a tour: a remarkable state of affairs for the man who has been Jamaica’s most exhilarating performer for half a century.
With an agenda that was equal parts celebration, Black history lesson and pulpit preaching – immersed in horn-drenched music that was at once modern and ancient – Burning Spear entranced and energised audiences across the world. Subdued lighting, smoke (much of which came from the crowd) and live dub versioning built the atmosphere around roots reggae’s greatest voice as he offered hope for the future while addressing the injustices of the past.
Throughout Spear’s career his music has been motivated by his devout Rastafari faith, looking towards African culture as the roots of Black consciousness, and sowing cerebral salvation throughout the diaspora: roots reggae was a vital, joyous contemporary expression of what was forcibly stolen 400 years ago. Burning Spear and his fellow Rastas celebrated the Black separatist activist Marcus Garvey and railed against the evils of slavery and colonialism, warning that a slavery of the mind can be more dangerous than physical subjugation. His goal has been to uplift.
“The time was right,” he says of his return to the UK this week at the age of 77, speaking on the phone from his New York home. “Look at the last two years – nobody going no place, nobody doing things together, nobody even shaking hands! If somebody stand next to you in a line and that man sneeze, everybody look at him with a bad eye! Now, as things start to come around again, the time is right to be playing my music live in a way that will bring people together.
“It’s not like I retired, but it’s best sometime to hold back. These shows are going to be amazing because people haven’t seen me for a while and that means we’re going to have a stronger force of energy in the place.”
Doing what he believes to be the right thing, as opposed to the most lucrative, has been a Burning Spear characteristic since he was still known as Winston Rodney. It’s a motivation that took him in and out of Jamaica’s legendary Studio One record company at the start of his career in the late 1960s.
A tiler by trade, Rodney arrived in Kingston from St Ann parish on Jamaica’s rural north coast in his early 20s, armed with an acoustic guitar and some self-penned hymns to Rastafari. Although the faith had been present on the island since the 1930s, it was still widely despised in the broadly Christian, British-ruled country – particularly in the embryonic music business. Coxsone Dodd of Studio One (“the best musicians, singers, engineers were in there,” Spear says) was the only producer in town that encouraged Rastas.
Spear has mixed memories of his time there. “Remember your first day going to school? You’re shy, you don’t know how to communicate, you don’t know who is a friend – that was what going to Studio One was like. I knew if I don’t say something that makes sense they would have kicked my arse out and I wouldn’t be here now. I stand up strong, and when I sing my first song to Mr Dodd of course he like the sound of it and he was like: ‘Damn! We’ll have to keep this one!’”
Sympathetic as Dodd was to Rastafari as a faith, he didn’t get it as a music. He recorded the Abyssinians’ Satta Massagana then refused to release it because he thought it too confrontational to have much appeal. Likewise, with Spear: Dodd cut two albums with him at the start of the 1970s but the recording was too restrained to capture the essence of Spear’s dread delivery.
This wasn’t the owner’s only failing, Spear recalls. “I could hang out with some of the best musicians and studio engineers and watch them work, so I learn a lot. Then I realised that you’re not getting paid. People write Mr Dodd was a good man. No! Mr Dodd would be taking credit for all of we songs. When it come to fixing up on the music, he can grow the music, he was good at that, but getting some money? No, that’s not Mr Dodd; he wasn’t an honest man.”
After several years, Burning Spear returned to St Ann, understandably disillusioned – he had failed at the island’s number-one hit factory, and his brand of roots music hadn’t found a place on the all-important Kingston sound systems. Back then reggae was an almost exclusively urban affair, the industry in the capital dictating musical development with a conceit that assumed anyone else had straw in their ears. Upon returning to life away from music, Spear fell in with local sound system owner and nascent record producer Lawrence Lindo, AKA Jack Ruby, who talked him into recording again. It was a revelation.
The producer’s lethargic time signatures, arrangements that left big spaces, and unique Addis Ababa-slanted horn phasing, gave Spear the ideal platform to properly explore his compelling vocal range. Most importantly he had hijacked Kingston’s edgier take on roots music and shifted it to the hills. This had the pace and tinge of melancholy that evoked the weariness brought on by life in rural Jamaica, where hard work from sun up to sun down – “from nah see to nah see” – was the norm, and carrying things along seemingly endless dusty roads was what people did.
On top of that, Spear’s lyrics had the spirit of rural resistance: these folk might be worked to exhaustion, but they would never be put down. This essence dates back to Queen Nanny of the Maroons, whose guerrilla army of rebel slaves held off British redcoats on the island’s mountainous interior in the 18th century until they were granted their own settlement.
Since the majority of Jamaica’s population were rural and a significant proportion of Kingstonians were recent transplants, hearing themselves in this music gave Burning Spear the success that had evaded him at Studio One. “Jamaican people always expected from their music that some consciousness and culture get mixed in – not all of it, but there must be some,” he says. “Music that carry a lot of strong vibes is a force to uplift the thoughts and minds of the people, so you would have more consciousness, less violence and people wouldn’t be so ignorant and so stupid towards each other.”
Four mid-1970s albums – Marcus Garvey, Man in the Hills, Dry & Heavy and Social Living – cemented Spear alongside Bob Marley as the most significant voice in reggae at the time. The songs weren’t so much an incitement to fight Babylon, but rather an explanation of why it was such a good idea; and although anger and indignation had their place, they set out the motivation for Black pride and self-celebration.
“When I put my lyrics together I know I have to tell a story, with a beginning, a middle and an end that people can follow and it will educate them,” he says. “If it’s about Christopher Columbus or the end of war or living good, the music needs to carry some form of education within it – if people know these stories, they can think properly.”
Songs such as Civilised Reggae and Slavery Days are Spear giving advice or providing information, rather than targeting individuals or situations. Even through Jamaica’s sustained political violence of the 1970s, he believed that people should and could govern themselves if given the knowledge and self-awareness to do so; for Burning Spear, “the oppressor” is a nebulous force rather than a particular regime, and as likely to come from within a person as from the outside.
In recent years, the issue that has most stirred Burning Spear is to see Garvey, who so powerfully influenced the Rastafari faith, recognised as the Black Jamaican hero he was. “The time is right for Marcus Garvey to have a public holiday in his honour and be studied in school. The time is right for the people of Jamaica to come together and make sure that take place.”
These albums pretty much established Burning Spear’s future career path – atmospheric, politicised roots music of the highest calibre, best experienced in a live environment. After 50-odd years in the business, he knows what works in a concert. “People knows what to expect, which is me, Burning Spear, and they are ready to accept it. They know. I will just be who I is – I can’t be less or more.”
But he hasn’t given up on recording, actually enjoying lockdown as a chance to “gather” ideas to take to the studio later this year. Judging by his 2021 single Mommy, which brought all the vintage Spear resonance and musical depth to bear but with modernised instrumentation and sounds, this new music will not disappoint.
“You can’t just come up with a melody, or you can’t just create lyrics – you have to let them come to you,” he says. “When everything closed, I could relax and enjoy the melodies and lyrics coming to me. I have to prepare myself to store them, then when I need them in the studio I can take whatsoever I need and put it where it belong. I’m filled with lyrics and melody ideas. That’s me, that’s what I is – music.”
Burning Spear plays the Birmingham Forum on 13 August and O2 Academy Brixton, London, on 14 August.

source

Get to know CCM's incoming faculty members and new unit heads – University of Cincinnati

UC’s College-Conservatory of Music will welcome six new full-time faculty members to its roster of distinguished performing and media arts experts this fall. In addition, the college is also welcoming five current faculty members into new leadership roles for 2022-23.
The six newest members of CCM’s faculty will begin their appointments on Aug. 15, 2022. Those faculty members are:
513-556-5803
[email protected]
513-556-2696
[email protected]
513-556-3442
[email protected]
513-556-6017
[email protected]
513-556-3442
[email protected]
513-556-3442
[email protected]
The following current CCM faculty members have recently assumed new roles:
513-556-3737
[email protected]
513-556-5803
[email protected]
513-556-9530
[email protected]
513-556-6046
[email protected]
312-882-5647
[email protected]
Learn more about CCM’s divisional and departmental leadership here.
At CCM, tomorrow’s arts luminaries work with today’s industry leaders. More than 150 internationally recognized faculty members work with students from around the world. With a 7:1 student-to-faculty ratio, CCM students receive personalized mentorship from professors who guide their individual scholarly, creative, musical, performing and teaching growth.
Who are our faculty members? CCM professors are Grammy, Emmy and Tony Award-winning performers and designers, ASCAP and BMI Award-winning songwriters and composers, Naumburg Gold Medalists and Fulbright Scholars. They are members of major American orchestras, as well as directors and conductors for the world’s leading opera houses and summer festivals. They are researchers, educators, choreographers, filmmakers and playwrights, as well as experts on health and wellness for artists. They have published widely-used textbooks, performed at the White House and produced multimedia for US presidents. They have been featured on major broadcasts like Good Morning America, the Today Show, the Tonight Show, the BBC Proms and Sesame Street, to mention just a few of their accomplishments.

At the University of Cincinnati, we realize the impact our teaching, research, artistry and service can have on our community and the world. So, we don’t wait for change to happen. We break boundaries, boldly imagine and create what’s Next. To us, today’s possibilities spark tomorrow’s reality. That’s why we are leading urban public universities into a new era of innovation and impact, and that’s how we are defining Next for the performing and media arts.
We’re about engaging people and ideas – and transforming the world.
We are UC. Welcome to what’s Next.
Featured image at top: The exterior of CCM’s Patricia Corbett Theater. Photo/UC Creative + Brand
Rebecca Butts | Assistant Public Information Officer | UC College-Conservatory of Music
| 513-556-2675

August 2, 2022
The Cincinnati Symphony Orchestra (CSO) and the UC College-Conservatory of Music (CCM) are proud to announce recent successes of their CSO/CCM Diversity Fellowship program. Established in 2015 and launched with a grant from The Mellon Foundation, the nationally-recognized program amplifies and supports extraordinary young string players from populations historically underrepresented in American orchestras through a specialized, two-year graduate degree-level education, professional development and mainstage performance opportunities with the Cincinnati Symphony Orchestra. Four CSO/CCM Diversity Fellows have obtained full-time positions with major American orchestras for the 2022-23 season; additional Diversity Fellows successes include careers in music education, social change and orchestral administration.

August 1, 2022
UC College-Conservatory of Music Costume Design and Technology student Brittanie McKenna Travis shares her experience as an intern at the Television Academy Foundation

August 1, 2022
CCM Prep at the University of Cincinnati College-Conservatory of Music offers a wide variety of programs in music dance, and theatre arts for arts enthusiasts of all ages and abilities — including classes for children, teens, adults and students preparing for a future in the performing arts.

University of Cincinnati
2600 Clifton Ave.
Cincinnati, OH 45220
513-556-0000
UC Tools
About Us
University of Cincinnati | 2600 Clifton Ave. | Cincinnati, OH 45221 | ph: 513-556-6000
Alerts | Clery and HEOA Notice | Notice of Non-Discrimination | eAccessibility Concern | Privacy Statement | Free Speech | Copyright Information
© 2020 University of Cincinnati
University of Cincinnati
2600 Clifton Ave.
Cincinnati, OH 45220
513-556-0000
© 2020 University of Cincinnati

source

A heat-flux upper boundary for modeling temperature of soils under an embankment in permafrost region | Scientific Reports – Nature.com

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 13295 (2022)
86 Accesses
Metrics details
Building roads in permafrost region is challenged because permafrost is sensitive to temperature increase. As an embankment gains/drains heat mostly at the upper surface, accurately modeling the heat transfer in the upper surface is crucial to understand the thermal stability of the road. Popular methods treat the upper boundary as a temperature-controlled model (TCM), where temperature of the upper surface is set as a sinusoidal function. This simple function, however, fails to identify the influences of solar irradiance, heat convection, and thermal irradiance on the heat transfer on the ground surface. Here we introduce a heat-flux model (HFM) to calculate the heat fluxes at the embankment upper surface and at the adjacent ground surface. HFM-predicted temperature under an embankment is compared against the observed temperature to validate the model, and is compared to the TCM-predicted temperature. While TCM-predicted temperatures and HFM-predicted ones are similar in trend and in pattern, the HFM-predicted temperatures are far more coincident with the observed ones. The pros and cons of both HFM and TCM are discussed. Further studies are expected to use HFM to understand the heat flux components such as solar absorption, heat convection, and thermal irradiance on the temperature of permafrost under embankments.
Permafrost regions cover approximately 22.8 million km2 earth surface, of which permafrost in China makes up 1.59 million km21. Roadways across permafrost regions are usually layered upon a built-up embankment to keep the underlying soil intact2. The construction of the embankment varies the permafrost stratum undesirably and causes differential settlement at the ground surface3,4,5,6. Accurately simulating the heat transfer at the ground surface is critical to precisely predict the temperature of the permafrost stratum after the construction of the embankment. When simulating the temperature of soils under a permafrost embankment, popular methods usually treat this boundary as a temperature-control model (TCM)7,8,9, in which the temperature at the ground surface is assumed a sinusoidal wave. This sinusoidal wave is used to bulkily represent the influences of solar radiation, heat convection, thermal irradiance, and evaporation (if any) on the ground surface10. While this model is simple, the parameters of the sinusoidal wave are estimated by rule of thumb, but not by art (Table 3) and is thus hard to be estimated accurately.
If the ground-surface temperature can be guessed reliably, the temperatures of the deeper soil vary less and thus can be estimated with greater confidence. Qin et al. has proposed a heat-flux upper boundary (HFUB) for the natural ground surface to predict the temperature of permafrost stratum10,11. The model is suitable to predict the temperature of permafrost under a flat, open area only. Liu et al. then proposed an earth-atmosphere coupled model to predict the temperature of soil under an embankment12. This model, however, does not consider the variation of daily solar irradiance. Without a HFM for predicting the temperature of the embankment and its underlying soils, it is unscientific to guide the selection of performance grading of asphalt binder for asphalt pavement under the specific climate condition; it is difficult to understand the partition of radiant heat flux at the ground and to find practical solutions that cut the heat gain of the embankment to preserve the underlying permafrost; it is unknown how to eliminate the sunny-shady effect of embankment in permafrost region by equalizing the conductive heat at both embankment side slopes. In addition, as the global warming heats up the underlying permafrost and causes deformation to the embankment, the HFM is indispensable to predict the settlement of the embankment precisely.
Here we propose a comprehensive heat-flux model (HFM) for the heat transfer at the embankment upper surface and at the natural ground adjacent to the embankment. The proposed model considers the heat flux from solar irradiance, heat convection, and thermal irradiance, and counters the shading effect of the embankment on the adjacent ground. Temperatures predicted by the HFM model are compared against the temperature profiles that are observed from a testing section at the Beiluhe Permafrost Station in the Qinghai-Tibet Plateau. The TCM is also used to predict the temperature at the same site to demonstrate the difference between the TCM and the HFM. The pros and cons of both the HFM and the TCM are explained. The application of the HFM is briefly discussed.
The heat transfer in the embankment and in the soils below an embankment is conduction-dominated, which obeys
where ρ (kg/m3) is the density of the soils; T (°C) is the temperature of the soils; ceq (J/(kg K)) is the equilibrium heat capacity of the soils; and λ (W/(m⋅K)) is the heat conductivity of the soil. It is noted that ceq represents the latent heat of the permafrost when the phase change of water in the permafrost occurs. Methods to calculate ceq and λ have been documented well and can be referred in Appendix A of Supplementary Information.
To solve Eq. (1), one must specify a proper boundary condition to the computational domain, which should be sufficiently large so that a further extent of the domain does not influence the temperature simulation of the embankment and of the underlying soils. As an embankment is usually an isosceles trapezoid with the short base at the top, the computational domain is selected as the trapezoid centered over a rectangle envelop that represents the natural ground (Fig. 1). The heat flux from right and left sides of the rectangle envelop is adiabatic, and the heat flux from the bottom of the base is the product of the local geothermal gradient and the heat conductivity of the soil at the base (Fig. 1). Most of heat fluxes that change the temperature of the embankment and of the underlying soils come from the upper boundary, which consist of the embankment upper surface, the side slope surface, and the adjacent natural ground surface (Fig. 1). In published articles10,13, the upper boundary can be treated as either a temperature-controlled boundary (Fig. 1a) or a heat-flux boundary (Fig. 1b).
The computational domain of an embankment underlain by permafrost. (a) temperature-controlled upper boundary, (b) heat-flux upper boundary. Ti (i = 1, 2, …, 5) stands for a specific sinusoidal temperature function.
Popular models to predict the temperature of the permafrost under a roadway embankment prefer using a temperature boundary, which is termed TCM. The TCM specifies to the upper boundary as a sinusoidal temperature function
where Ts (°C) is the ground-surface temperature, T0 (°C) represents the mean annual ground temperature, and A (°C) is the amplitude of the ground-surface temperature, ω (rad/s) represents the angular frequency, ω = 2π/(24 × 3600 × 365); and ϕ stands for the phases (in radians) of annual ground surface temperature.
Equation (2) considers the daily temperature only, although some models occasionally take the daily temperature pattern into account14. As the ground-surface temperature is difficult to be measured directly, T0 and A are coarsely estimated from the annual air temperature (data from the nearly weather station) according to the adhesive layer theory15. Parameters in Eq. (2) bulkily represent the complex heat transfer at the ground surface, without considering the solar irradiance, convection, thermal irradiance, and evaporation.
The HFM focuses on formulating the upper boundary to solve the temperature of soils in the computational domain using Eq. (1). The most variable heat-flux boundaries are the ground surfaces and the embankment’s upper surface. Both surfaces absorb irradiance from the sun and downward thermal irradiances from the outer space Ld (W/m2). Both surfaces release a portion of the absorption as heat convection H (W/m2), upward long-wave radiation to the outer space Lu (W/m2), and evaporation E (W/m2) (if any) simultaneously. The surplus heat flux, G (W/m2), stores at the ground surface to vary the skin temperature and conducts it to the deeper soils. The heat balance of the upper surface exposed to the air obeys,
where I (W/m2) is the incoming solar irradiance to the surface, R (–) is the reflectance (albedo) of the surface.
In Eq. (3), Lu and Ld are proportional to the ground-surface thermal emissivity, ε (–); in practice, it is more convenient to compute the net long-wave radiation, which is
where σ is the Stefan-Boltzmann constant, σ = 5.67 × 10−8 W ·m−2 ·K−4; the subscripts “s” and “y” represent the ground surface and the outer sky, respectively.
In Eq. (4), the ground-surface temperature, Ts, can be calculated from Eq. (1) once the heat flux is specified to the boundary of the computational domain. The sky temperature, Ty (°C), can be estimated:
where Ta (°C) is the air temperature; εy (–) is the sky emissivity, which is
where Td (°C) is dew point:
where a0 = 17.3, b0 = 237.7, and r0 = a0Ta/(b0 + Ta) + ln(χ/100)12, with χ is the relative humidity of the surrounding air.
The heat convection, H, can be calculated by
where hc (W/(m2·°C)) is the heat convection coefficient. The computation of hc has been well documented in many models, among which the following simple one can provide reliable accuracy16
where v (m/s) is the wind speed recorded at a height of 9.0 m. For a wind recorded from a weather station that is not set at 9.0 m height, the wind speed must be converted according to
In Eq. (3), the evaporation E is difficult to calculate because it is hard to know both the water availability at the ground surface and the evaporation resistance of the ground surface. When water is available at the ground surface, the evaporation is proportional to the incoming solar radiation, with the peak evaporation occuring around solar noon and with a negligible evaporation at nighttime. According to Qin et al.10, the evaporation term can be reasonably neglected by calibrating the solar reflectance at the ground surface. In this model, the evaporation is neglected, and the ground-surface reflectance is adjusted unless the observed ground temperature is coincident with the predicted one. As a result, the heat flux to the upper boundary of the computational domain is
In Eq. (11), formulas to calculate the components H and L have been shown. The most complex component in Eq. (11) is the solar irradiance, I, on the embankment surface and on the ground surface adjacent to the embankment.
Solar irradiance on a global horizontal surface is the global horizontal solar irradiance logged from the local weather station. Solar irradiance is partitioned to beam radiation and diffuse radiation. The side slope of an embankment can be either shaded or sunlit, depending on the time of the day, on the day number of the year, on the orientation of the embankment, and on the angle of the side slope. The solar irradiance on the side slope is thus more complicate. To find the solar irradiance on a tilt surface, one must find the solar azimuth angle, which varies with day and time. On a specific day, the solar declination angle, δ (rad), can be estimated from
where N is the day number of the year, with N = 1 on January 1.
On a specific time of the day, the solar zenith angle can be estimated from
where β (rad) is the latitude of the observer; α (rad) is the solar hour angle, which is 0 at solar noon. The time span from sunrise to sunset can be derived from:
where α at the sunset time is positive, and at the sunrise time is negative.
With the solar declination angle, the solar zenith angle and the solar hour angle, one can find the solar azimuth angle, (gamma) (rad), is given by
If (left|mathrm{sin }gamma right|>1) or if (left|mathrm{sin}theta right|) in Eq. (15) is infinitesimal, the solar azimuth angle has to be estimated by:
It is noted that at noon θ = 0, the denominator in Eqs. (15) and (16) is equal to zero. To circumvent this problem, one can discrete the time sequence between sunrise to sunset in an even number so that the sequence does not have θ = 0.
With the solar azimuth angle, one can determine if a side slope of an embankment is sunlit or shaded. At low-sun case, beam radiation hits one side slope only, while the other is shaded. Assuming the height of the embankment is h (m), beam radiation creates a shaded belt parallel with the embankment orientation. The width of the belt is
where γe (rad) is the orientation of the embankment.
Whether a side slope of an embankment is sunlit or shaded can be estimated by
where η (rad) is the angle of the side slope of the embankment.
Global solar horizontal solar irradiance, I (W/m2), is divided into beam irradiance Ib (W/m2) and diffuse irradiance Id (W/m2), that is
The division has been documented in many models, in which one simple, well-cited model can provide reasonable accuracy17:
where ky is the sky cleanness factor with 0 representing a fully cloudy day and 1.0, a fully sunny day.
The global horizontal solar irradiance, I, can be directly specified to the upper surface of the embankment. However, the solar irradiance on the side slope and on the natural ground surface adjacent to the embankment is more complicate. According to Eq. (18), if a surface is sunlit, the solar irradiance is Id + Ib falling on that surface; otherwise, is the Id only. Diffuse irradiance on the side slope is
The beam radiation on the side slope is the dot product of the beam irradiance Ib and the normal of the side slope.
where the azimuth of the side slope, ψ (rad), can be estimated by
In Eq. (22), if Ibs < 0, which means the slope is shaded, then Ibs = 0. The solar irradiance on the side slope is
The solar irradiance on the natural ground surface, Ig, is also the addition of diffuse irradiance Idg and beam irradiance Ibg. The construction of the embankment blocks the sky view of the natural ground surface, especially the surface that is close to the side slope toe of the embankment. Setting the side slope toe is the origin, the x axis perpendicular to the embankment orientation, and the y axis normal to the ground surface, one gets the sky view factor of any point (x,0) at the natural ground surface as
The diffuse radiation on the natural ground surface adjacent to the side slope is
The beam radiation on the natural ground surface is
The solar irradiance on the natural ground surface adjacent to the side slope is
It is noted that a factor of sunlight reflecting from the side slope can be captured by the adjacent natural ground surface, and vice versa. This solar trapping effect increases the solar absorption of the side slope and of the adjacent ground, especially for the surface near the side slope toe. This topic has been documented and it is found the additional solar absorption caused by the solar trapping effect is negligibly small compared to the solar absorption18.
This study uses both the TCM and HFM to simulate the temperature of underlying permafrost under an embankment in the Beiluhe Permafrost Station (34.8° N, 92.9° E). The simulated results are compared against the logged temperature. The embankment is isosceles with a height of 3 m, a top (short) base of 8.0 m, and a lower (long) base of 17 m. The computational domain is extended horizontally 20 m from the side-slope toe of the embankment, and vertically 22 m from the natural ground surface. The orientation of the embankment is set as east–west orientation, because the thermal asymmetry of this embankment is the most-deleterious case. The embankment filler consists of coarse grained soil. The computational domain in the natural ground, from top to down, consists of a 2 m-thick loose silty clay, a 2 m-thick silty clay, a 6 m-thick layer with ground ice and clay, and finally a 12 m-thick mudstone silty clay (Fig. 1). Soils’ thermal parameters used for the simulation are listed in Table 1. Both left and right sides of the computational domain are set as adiabatic, and the thermal gradient at the bottom of the domain is 0.03 °C/m.
Firstly, the heat-flux boundary is specified to the upper surface of the computational domain. The air temperature Ta, the global horizontal solar radiation I, and the wind speed v, the relative humidity χ, and the sky cleanness factor ky at the embankment site are logged from typical annual weather data. The solar irradiance on the top of the embankment is Eq. (19); that on the side slope, Eq. (24); and that on the adjacent ground surface, Eq. (28). The solar reflectance of the embankment top, side slope, and adjacent ground is set as 0.22 according to Qin et al.19. Considering that water evaporates when it is available at the topsoil and that the evaporation pattern is coincident with solar radiation pattern, the simulation adjusts the reflectance some degree unless the predicted temperatures are best matched with the observed ones.
Then, the TCM is used to simulate the permafrost temperature at the same site. As a guess of the parameters (T0, A, and ϕ) in Eq. (2) could cause substantial errors, this study does not use the adhesive layer theory to parameterize the average, amplitude, and phase of annual ground-surface temperature. Instead, this study uses the least square fitting method to fit the ground-surface temperatures that are predicted via the HFM. The fitting T0, A, and ϕ in Eq. (2) are used as the parameters for the TCM to simulate the soil temperature under the embankment, while the soils’ thermal properties are kept unchanged.
In numerical simulation, either the HFM or the TCM needs specifying an initial temperature to the embankment and to the soil under the embankment. Initial temperatures of the natural ground soils are obtained by repeatedly using the heat-flux boundary to simulate the ground temperature (without embankment) until the differences of the temperature profile at a specific time of two sequential years are less year 0.01 °C. The temperature profile at 00:00 (hh:mm) on September 30 is treated as the initial temperature because the construction of the embankment is completed around this date usually. The initial temperature of the embankment is set as 2 °C uniformly, as usually used in published articles on this topic. This initial temperature (for the soil and the embankment) is used to simulate the temperature of the soils for 50 years after the construction of the embankment.
The soil temperature predicted by the HFM is compared against the temperature logged an earthen embankment in the Beiluhe Permafrost Station from September 2001 to October 2006. The embankment, DK1136 + 400, is an earthen roadbed of the Qinghai-Tibet Railway. Thermistors were buried inside the embankment central borehole and inside the boreholes rightly below the side slope toes to log the soil temperature. In addition, at the natural ground that was 20 m away from the embankment side slope toe, a borehole was also drilled to log temperature at the natural ground. For convenience, the temperature reported in the following section are the daily mean temperature, unless otherwise noted.
Since it was assumed that the ground thermal regime has reached an equilibrium state before the construction of the roadbed. Therefore, to ascertain the ground temperature error caused by the iteration, field-observed temperature from September 7, 2001 to September 7, 2006 was compared with that of simulation. In addition, we adopted the coefficient of determination (R2), mean value (Mean), and standard deviation (Std) to examine the accuracy of the simulation results, where all three indicators were calculated using MATLAB software. The specific calculation methods are as follows:
where To, Ts, (overline{{T }_{o}}) are the observed temperature, the simulated temperature and the average value of the observed temperature, respectively; n represents the total number of values (n = 1, 2, 3, …), and the subscript i stands for the serial number of the values.
Figure 2a,b show the temperature of the soils at 0.5 m depth under the natural ground that is 20 m away from the embankment side slope. It is found that the predicted temperatures (straight line) are well coincident with the simulated ones (dotted data), with R2 = 0.975, a mean error of 0.134 °C and a standard deviation of 0.702 °C (Fig. 2a,b). This statistical data substantiates that the HFM can well predict the temperature of the permafrost under the embankment. The good agreement between the simulation and the observation can be further substantiated from the temperature profiles in the natural borehole. As shown in Fig. 2c, the predicted temperature profile on April 20, 2002 is well agreed with the observed one. Similarly, in Fig. 2d, the predicted temperature profile is highly coincident with the observed one, with R2 = 0.963, a mean error of 0.029 °C and a standard deviation of 0.056 °C.
Soil temperature predicted by HFM. Location: at the natural borehole that is 20 m away from the side-slope toe (a) temperature serial at 0.5 m depth, with R2 = 0.975, Mean = 0.134 °C and Std = 0.702 °C, (b) temperature serial at 0.5 m depth, (c) on April 20, 2002, and (d) on October 19, 2002.
We further compare the predicted temperature profiles at the central borehole of the embankment to the observed ones. It is found that the predicted temperature near the embankment upper surface is greatly deviated from the observed one (Fig. 3). This great deviation is because the embankment is assumed to be completed as September 30 and the embankment temperature is assumed as 2 °C uniformly. These assumptions are somewhat unrealistic because the real construction of the embankment takes months and the temperature of the earthen filler is unknown. Despite this great deviation at near the ground surface, the predicted temperatures at deeper layer are well agreed with the observed ones (Fig. 3). As the heat of the embankment drains overtime and the influence of the initial temperature on the simulation vanishes, it is believed that the HFM can well predict the temperature of the soil under the embankment.
Soil temperature predicted by HFM. Location: at the central borehole. (a) on April 20, 2002, and (b) on October 19, 2002.
Here we compare the soil temperatures predicted by the TCM against the observed ones. To impose the TCM to the embankment surfaces, one must know T0, A, and ϕ in Eq. (2). In this study, the least square fitting method is used to fit the HFM-predicted ground-surface temperature to get T0, A, and ϕ in Eq. (2). The values of T0, A, and ϕ tabulated in Table 2 are used, while the others are the same as those used in the HFM.
It is found that the TCM can also predict the temperature of the soil under the natural ground. As shown in Fig. 4a,b, the temperature serial at 0.5 m depth is well coincident with the observed one, with a R square of 0.925, a mean error of 0.17, and a standard deviation of 1.213 °C. A close comparison between the predicted and observed temperatures reveals that when the temperature is close to the freezing/ thawing point (− 1 to 0 °C), the predicted temperature serial increases or decreases faster than the observed one (Fig. 4b). In reality, when the temperature of a soil is close to the freezing/thawing point, the soil needs more heat (cold) to increase (decrease) its temperature (Fig. 5a). But the TCM unrealistically supplies the sufficient heat (cold) to the soil such that the temperature at the ground surface follows a sinusoidal function (Fig. 5b,c). As a result, the TCM-predicted temperatures deviate somewhat from the observed ones, especially for temperature of the soils at shallow ground where they weather cyclic thawing and freezing annually (Fig. 4c,d). At deeper ground where the soil remains frozen, the predicted temperatures are well agreed with the predicted ones (Fig. 4c,d).
Soil temperatures predicted by TCM. Location: at the natural borehole that is 20 m away from the side-slope toe. (a) Temperature serial at 0.5 m depth, with R2 = 0.925, Mean = 0.17 °C and Std = 1.213 °C, (b) temperature serial at 0.5 m depth, (c) on April 20, 2002, and (d) on October 19, 2002.
During the freezing/thawing period, the TCM imposes more energy to the natural ground surface than the HFM does. (a) The entire year, (b) the thawing period, and (c) the freezing period.
As the temperature profiles and temperature serial in the natural boreholes and central borehole cannot represent the temperature of the entire embankment. Here we show the embankment’s temperature contours that are predicted by the HFM and the TCM, respectively. In case that the embankment has been built for five years, the daily mean temperature predicted by the HFM, in pattern and in magnitude, are highly similar with those predicted by the TCM (Fig. 6a,b). Using the HFM-predicted temperatures to minus the TCM-predicted ones, one can find the difference between the two modelings is about 0.1–0.2 °C (Fig. 6c), which is negligibly small and further implies that both models can predict the temperature of the soil under the embankment. Similar differences and similar patterns are found when the predicted embankment’s temperature contours in 10th year and 50th year are compared (Appendix B in Supplementary Information).
Comparison between the HFM-predicted temperatures and TCM-predicted ones after the embankment is constructed for 5 years. Date: On October 19. (a) HFM-predicted temperature, (b) TCM-predicted temperature, and (c) the HFM-predicted temperatures to minus the TCM-predicted ones.
To further understand the difference between the two models, we analyze the temperature profiles at the embankment central borehole and at the southern and northern side-slope toes. It is found that at the central borehole, the temperature profile predicted by the HFM is closely matched with that predicted by the TCM, especially within 5 year after the construction of the embankment (Fig. 7a). Almost the same difference is observed when compared is the temperature profiled predicted by the two models at 10 year after the construction of the embankment (Fig. 7b). As time elapses, the TCM-predicted temperature is about 0.1–0.2 °C higher than the HFM-predicted model, especially at the deeper layers (Fig. 7c). Similar differences and similar deviations between the two models are observed at the temperatures under the side slopes toes (Figs. 8 and 9). We do not know the reason why the TCM-predicted temperature is about 0.1–0.2 °C higher than the HFM-predicted model, a phenomenon that deserves further investigation.
The central-borehole temperature profile predicted by HFM is compared with that by TCM. Date: on October 27. (a) 5th year, (b) 10th year, and (c) 50th year.
The southern side-slope borehole temperature profile predicted by HFM is compared with that by TCM. Date: on October 27. (a) 5th year, (b) 10th year, and (c) 50th year.
The northern side-slope borehole temperature profile predicted by HFM is compared with that by TCM. Date: on October 27. (a) 5th year, (b) 10th year, and (c) 50th year.
This study is not intended to referee that the HFM is superior to the TCM, or vice versa. Each model has its advantage and disadvantage. The HFM mimics the natural heat transfer at the ground surface and thus can predict the temperature of the soil under the embankment more precisely. The HFM includes the influences of embankment thermal properties and weather data on the temperature of a permafrost stratum. It is thus capable to use the HFM to perform a sensitivity study about the influence of each parameter on the soil temperature. The HFM can help identify if variation of a specific parameter, such as solar reflectance, is favorite to preserve the permafrost under the embankment. If the deformation of the permafrost soil is concerned, it is preferred to use the HFM model to precisely predict the permafrost temperature so that the temperature-related deformation of the soil is estimated properly. In comparison, the TCM model is not a realistic boundary because the ground-surface temperature is not a rigidly sinusoidal wave. The TCM-predicted temperatures could deviate more from the observed ones. But the TCM can predict the temperature of the permafrost in a pattern that is similar to the observed one. As a result, if the trend of the temperature of permafrost under an embankment is interesting, the TCM is superior to the HFM because it is simple and it costs very little simulation time.
Currently, simulation of the temperature of permafrost soils under an embankment needs to guess some parameters. The TCM needs to reasonably guess the mean annual ground-surface temperature, T0, and the amplitude of this temperature, A. In this study, T0, A, and ϕ are regressed from the HFM-predicted temperature. As a result, the TCM-predicted temperature is coincident with the observed ones. However, in most cases, T0, A, and ϕ are unknown. Many documented articles states that T0, A, and ϕ are estimated on the basis of the adhesive layer theory, in which both T0 and A are some cesium degree greater than the local air temperature. But how to estimate both T0 and A is seldom explained. Table 3 lists T0, A, and ϕ that have been used to predict the temperature of permafrost under embankments in the Qinghai-Tibet Plateau. It can be seen that the T0, A, and ϕ vary greatly and that their values, sometime, are specified empirically and randomly.
While the HFM does not need T0, A, and ϕ, it needs to guess some parameters like sky clearness factor, solar reflectance and others. As the heat in the ground comes primarily from the sunlight, the most challenge of the HFM is to guess a reliable solar reflectance R on the upper surface. Although the R value of a surface can be measured, the true R value varies during the courses of day and year, with the lowest reflectance in summer and greatest value in winter12. It has been advocated that the use of energy-based R value to replace the true R so that the seasonal and daily variations of the solar reflectance at the embankment surface are weighed. The data for the energy-based R value, however, is very limited currently28. Specifying a reliable R value for the upper ground surface is thus challenged. Further studies are thus expected to understand the solar reflectance of ground surface in permafrost regions.
The HFM is helpful to select the right performance grading of an asphalt binder according to the climatic condition in the area of uses. In permafrost regions, asphalt pavement is preferred because its flexible properties are advantageously adapted to differential settlement that is caused by the warming of the underlying frozen soils29. Asphalt pavement is typically placed on the top of an embankment. It is critical to select the right performance grading of the asphalt binders to the right climate condition in the area of uses. Performance grading is a function of annual maximum and minimum pavement surface temperature, with one being the average seven-day maximum pavement temperature and the other being the minimum30,31. With the HFM, these temperature extremes can be precisely estimated according to the texture and color of the asphalt pavement and to the specific climatic conditions.
The HFM is powerful to estimate the heat gain and loss at the embankment surface precisely. The most concern heat flux component at the ground surface is the conductive heat flux, which mainly determines the temperature of the underlying frozen soils32,33,34. The HFM can reliably estimate the conductive heat flux to an embankment in a specific climate condition. Under the context of global warming, the HFM can be a useful tool to envision if the underlying permafrost can be cooled by varying embankment surface properties like albedo and emissivity. In addition to the conductive heat flux, how the radiant heat flux partitions at the embankment surface can be calculated. Understanding the heat flux balance at the ground surface is crucial to develop cool embankments and cool pavements for preserving the underlying permafrost under global warming.
The HFM is robust to find practical solutions to eliminate the thermal asymmetry of a roadway embankment in permafrost regions. After an embankment is built, the southern side slope absorbs more solar irradiance than the northern one does. As a result, the permafrost under the southern side slope is typically some Celsius degrees warmer than that under the northern one, a phenomenon that is termed as the sunny-shady effect and has been blamed as the culprit to the longitudinal cracks of the embankment35. Since this effect is caused by differential solar irradiance on both embankment side slopes, it can be mitigated by increasing the albedo of the southern side slope. But it remains unknown that for a specific embankment, increasing the albedo of the southern side slope to which degree can equalize the heat gain of both side slopes and thus eliminate the sunny-shady effect. The HFM can fill this knowledge gap and serves as a powerful tool to estimate the sunny-shady effect.
The HFM is indispensable to precisely calculate the deformation of warming permafrost under the embankment. Building embankment alters the thermal regimes such that the embankment absorbs more sunlight than the adjacent natural ground surface even if the surface materials are the same36. Plus the construction thermal disturbance, the permafrost underlain a roadway embankment has been found 0–1 °C warmer than the adjacent natural ground, especially in warm permafrost regions37. It has been observed that this temperature increment has caused 10–20 cm settlement to the embankment in warm permafrost region, and that the warming of permafrost still continues due to the global warming38. Correctly simulating the temperature increment caused by global warming and construction-induced warming is crucial to predict the embankment’s settlement, which is directly correlated to the damage of the embankment. As the HFM is far more reliable to predict the temperature of the underlying permafrost (Figs. 2 and 3), it is thus indispensable to foresee the serviceability of embankments in permafrost regions.
Other applications of the HFM may be vast but cannot be exhausted herein. For instance, the use of the HFM is not limited to the embankments in permafrost regions but also to those in seasonal frozen regions. It can be used to study on the influences of parameters like surface albedo, surface emissivity, surface roughness, pavement thermal inertia, and other controllable factors on the temperature of the underlying soils and of the pavement structures. It can be also adopted to estimate the impacts the uncontrollable factors like solar irradiance, wind speed, air temperature, and others on the soil temperature. Furthermore, it can be employed to estimate the temperature under embankments that is proactively cooled by inserting the embankment with thermosyphons, covering the side slope with crushed rock layer, and embedding the embankment with air convective duct, etc. While other applications of the HFM is unlimited and await further studies, this study is just a starting of the use of HFM to predict the temperature of permafrost under a roadway embankment.
This study proposed a heat-flux model (HFM) for the heat transfer at the upper surface of an embankment in permafrost regions. Different from traditional temperature-controlled model (TCM) that considers the annual ground-surface temperature varied as a sinusoidal wave, the HFM jointly considers the solar irradiance, heat convection, and thermal irradiance on the ground surface, as well as the shading effect of the embankment on the adjacent ground. The HFM model thus can be used to predict the influence of ground-surface thermal properties and local weather on the temperature of the permafrost under an embankment. The permafrost temperature predicted by HFM is compared against that observed ones. It is found that the HFM model can predict the permafrost soils’ temperature precisely, for instance, with R2 = 0.975, a mean error of 0.134 °C and a standard deviation of 0.702 °C. In comparison, the TCM-predicted temperature is also compared against the observed one. It is found that TCM predicts the permafrost soil temperature in a lower accuracy.
Temperatures predicted by the HFM are 0.1–0.2 °C lower than those predicted by the TCM, but the temperature-varying trend and temperature contour are similarly. It is concluded that if the temperature trend of the soil under an embankment is of concern, the TCM can be recommended if the mean annual ground-surface temperature and its amplitude can be guessed precisely. If the sensitivity of the weather data and ground-surface thermal properties on the permafrost temperature is of concern, the HFM is recommended but the solar reflectance of the ground surface must be weighted wisely. Further studies are expected to understand the energy-based solar reflectance of the natural ground surface and of the embankment surface so that the solar absorption in the HFM is weighted precisely. The HFM can be applied to guide the selection of the performance grading of asphalt pavement in permafrost regions, to understand the heat partition on the embankment surface, to understand the sunny-shady effect of embankments, to calculate the deformation of embankment, and explore other applications related to the HFM.
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Temperature (°C)
Ground-surface temperature (°C)
Air temperature (°C)
Dew point temperature (°C)
Bottom limit temperature (°C)
Upper limit temperature (°C)
Mean annual temperature (°C)
Heat capacity (J/(kg·K))
Equilibrium heat capacity (J/(kg·K))
Time (s)
Amplitude of the temperature (°C)
Solar irradiance (W/m2)
Beam irradiance (W/m2)
Beam irradiance on the side slope (W/m2)
Beam irradiance on the ground (W/m2)
Diffuse irradiance (W/m2)
Diffuse irradiance on the side slope (W/m2)
Diffuse irradiance on the ground (W/m2)
Solar irradiance on the side slope (W/m2)
Reflectance (–)
The net long-wave radiation (W/m2)
Downward thermal irradiance (W/m2)
Upward long-wave radiation (W/m2)
Heat convection (W/m2)
Evaporation (W/m2)
Conduction (W/m2)
Heat convection coefficient (W/(m·°C))
Wind speed (m/s)
Height (m)
Day number of the year (–)
Sky cleanness factor (–)
Height of the embankment (m)
Width of the shaded area (m)
Sky view factor (–)
Water content (–)
Latent heat of water (kJ/kg)
Density (kg/m3)
Heat conductivity (W/(m⋅K))
Thermal emissivity (–)
Stefan–Boltzmann constant (–)
Relative humidity (–)
Latitude (rad)
Solar declination angle (rad)
Solar hour angle (rad)
Solar zenith angle (rad)
Solar azimuth angle (rad)
Orientation of the embankment (rad)
Angle of the side slope (rad)
Azimuth of the side slope (rad)
Angular frequency (rad/s)
Phases (rad)
Unfrozen soil
Frozen soil
Water
Unfrozen water
Ice
Sky
Natural ground surface
Side slope
South-facing side slope
North-facing side slope
Qinghai-Tibet Highway
Qinghai-Tibet Railway
Qinghai-Tibet Plateau
Ran, Y. et al. Distribution of permafrost in China: An overview of existing permafrost maps. Permafrost Periglac. 23, 322–333. https://doi.org/10.1002/ppp.1756 (2012).
Article  Google Scholar 
Ma, W. et al. Remedying embankment thaw settlement in a warm permafrost region with thermosyphons and crushed rock revetment. Can. Geotech. J. 49, 1005–1014. https://doi.org/10.1139/t2012-058 (2012).
Article  Google Scholar 
Wagner, A. M. et al. Permafrost degradation and subsidence observations during a controlled warming experiment. Sci. Rep. 8, 10908. https://doi.org/10.1038/s41598-018-29292-y (2018).
ADS  CAS  Article  PubMed  PubMed Central  Google Scholar 
Pei, W., Zhang, M., Li, S., Lai, Y. & Jin, L. Enhancement of convective cooling of the porous crushed-rock layer in cold regions based on experimental investigations. Int. Commun. Heat Mass 87, 14–21. https://doi.org/10.1016/j.icheatmasstransfer.2017.06.019 (2017).
Article  Google Scholar 
Shang, Y., Niu, F., Lin, Z. & Sun, T. Analysis of the cooling effect of a concrete thermal pile in permafrost regions. Appl. Therm. Eng. 173, 115254. https://doi.org/10.1016/j.applthermaleng.2020.115254 (2020).
Article  Google Scholar 
Lu, Q., Zhao, D. & Wu, S. Simulated responses of permafrost distribution to climate change on the Qinghai-Tibet Plateau. Sci. Rep. 7, 3845. https://doi.org/10.1038/s41598-017-04140-7 (2017).
ADS  CAS  Article  PubMed  PubMed Central  Google Scholar 
Sun, B., Yang, L., Liu, Q. & Xu, X. Numerical modelling for crushed rock layer thickness of highway embankments in permafrost regions of the Qinghai-Tibet Plateau. Eng. Geol. 114, 181–190. https://doi.org/10.1016/j.enggeo.2010.04.014 (2010).
Article  Google Scholar 
Sun, H., Ge, X., Zhu, D., Niu, F. & Chen, J. Numerical investigation of the temperature field of a new convection-intensifying composite embankment in permafrost regions. J. Cold Reg. Eng. 33, 06018001. https://doi.org/10.1061/(ASCE)CR.1943-5495.0000174 (2019).
Article  Google Scholar 
Han, F., Yu, W., Yi, X., Hu, D. & Lu, Y. Thermal regime of paved embankment in permafrost regions along the Qinghai-Tibet Engineering Corridor. Appl. Therm. Eng. 108, 330–338. https://doi.org/10.1016/j.applthermaleng.2016.07.126 (2016).
Article  Google Scholar 
Qin, Y., Hiller, J. E. & Bao, T. Modeling cold region ground temperatures with a heat flux upper boundary model. J. Cold Reg. Eng. 27, 29–43. https://doi.org/10.1061/(ASCE)CR.1943-5495.0000051 (2013).
Article  Google Scholar 
Qin, Y. & Bao, T. Modeling geothermal regime in the Qinghai-Tibet Plateau: An examination of the upper-boundary condition. Arab. J. Geosci. 7, 855–864. https://doi.org/10.1007/s12517-013-0889-2 (2013).
Article  Google Scholar 
Liu, Z., Chen, J., Jin, L., Zhang, Y. & Lei, C. Roadbed temperature study based on earth-atmosphere coupled system in permafrost regions of the Qinghai-Tibet Plateau. Cold Reg. Sci. Technol. 86, 167–176. https://doi.org/10.1016/j.coldregions.2012.10.005 (2013).
Article  Google Scholar 
Zhang, M., Lai, Y., Gao, Z. & Yu, W. Influence of boundary conditions on the cooling effect of crushed-rock embankment in permafrost regions of Qinghai-Tibetan Plateau. Cold Reg. Sci. Technol. 44, 225–239. https://doi.org/10.1016/j.coldregions.2005.12.002 (2006).
Article  Google Scholar 
Qin, Y. & Tang, P. Effects of diurnal temperature rhythm on the geothermal regime under the embankment in Qinghai-Tibet plateau. Arab. J. Geosci. 4, 259–267. https://doi.org/10.1007/s12517-010-0166-6 (2011).
CAS  Article  Google Scholar 
Zhu, L. Study of the adherent layer on different types of ground in permafrost regions on the Qinghai-Xizang plateau. J. Glaciol. Geocryol. 10, 8–14 (In Chinese with English Abstract) (1988).
Qin, Y. & Hiller, J. E. Ways of formulating wind speed in heat convection significantly influencing pavement temperature prediction. Heat Mass Transfer 49, 745–752. https://doi.org/10.1007/s00231-013-1116-0 (2013).
ADS  Article  Google Scholar 
Orgill, J. F. & Hollands, K. G. T. Correlation equation for hourly diffuse radiation on a horizontal surface. Sol. Energy 19, 357–359. https://doi.org/10.1016/0038-092X(77)90006-8 (1977).
ADS  Article  Google Scholar 
Zhang, X., Yan, L.-E. & Qin, Y. Regulating solar absorptance for remedying thermal asymmetry of a roadway embankment. Int. J. Heat Mass Tran. 121, 64–71. https://doi.org/10.1016/j.ijheatmasstransfer.2017.12.151 (2018).
Article  Google Scholar 
Qin, Y., Tan, K., Yang, H. & Li, F. The albedo of crushed-rock layers and its implication to cool roadbeds in permafrost regions. Cold Reg. Sci. Technol. 128, 32–37. https://doi.org/10.1016/j.coldregions.2016.05.004 (2016).
Article  Google Scholar 
Lai, Y., Wang, Q., Niu, F. & Zhang, K. Three-dimensional nonlinear analysis for temperature characteristic of ventilated embankment in permafrost regions. Cold Reg. Sci. Technol. 38, 165–184. https://doi.org/10.1016/j.coldregions.2003.10.006 (2004).
Article  Google Scholar 
Lai, Y., Zhang, S., Zhang, L. & Xiao, J. Adjusting temperature distribution under the south and north slopes of embankment in permafrost regions by the ripped-rock revetment. Cold Reg. Sci. Technol. 39, 67–79. https://doi.org/10.1016/j.coldregions.2004.04.003 (2004).
Article  Google Scholar 
Liu, Z., Lai, Y., Zhang, M. & Zhang, X. Numerical analysis for random temperature fields of embankment in cold regions. Sci. China Ser. D 50, 404–410. https://doi.org/10.1007/s11430-007-2043-z (2007).
Article  Google Scholar 
Zheng, B., Zhang, J. & Qin, Y. Investigation for the deformation of embankment underlain by warm and ice-rich permafrost. Cold Reg. Sci. Technol. 60, 161–168. https://doi.org/10.1016/j.coldregions.2009.08.012 (2010).
Article  Google Scholar 
Chen, L., Yu, W., Yi, X., Hu, D. & Liu, W. Numerical simulation of heat transfer of the crushed-rock interlayer embankment of Qinghai-Tibet Railway affected by aeolian sand clogging and climate change. Cold Reg. Sci. Technol. 155, 1–10. https://doi.org/10.1016/j.coldregions.2018.07.009 (2018).
CAS  Article  Google Scholar 
Su, B., Li, N. & Quan, X. The numerical study on the ventilated embankment in permafrost regions in Qinghai-Tibet railway. Cold Reg. Sci. Technol. 38, 229–238. https://doi.org/10.1016/j.coldregions.2003.11.003 (2004).
Article  Google Scholar 
Qian, J., Yu, Q., You, Y., Hu, J. & Guo, L. Analysis on cooling effect of new hollow concrete brick revetment under gravel pavement in permafrost regions. Cold Reg. Sci. Technol. 85, 15–21. https://doi.org/10.1016/j.coldregions.2012.06.003 (2013).
Article  Google Scholar 
Yuan, C., Yu, Q., You, Y. & Guo, L. Formation mechanism of longitudinal cracks in expressway embankments with inclined thermosyphons in warm and ice-rich permafrost regions. Appl. Therm. Eng. 133, 21–32. https://doi.org/10.1016/j.applthermaleng.2017.12.118 (2018).
Article  Google Scholar 
Sailor, D. J. & Fan, H. Modeling the diurnal variability of effective albedo for cities. Atmos. Environ. 36, 713–725. https://doi.org/10.1016/S1352-2310(01)00452-6 (2002).
ADS  CAS  Article  Google Scholar 
Duojie, C. et al. Assessment of freeze-thaw cycles impact on flexural tensile characteristics of asphalt mixture in cold regions. Math. Probl. Eng. 2021, 6697693. https://doi.org/10.1155/2021/6697693 (2021).
CAS  Article  Google Scholar 
Ramadhan, R. H. & Al-Abdul Wahhab, H. I. Temperature variation of flexible and rigid pavements in Eastern Saudi Arabia. Build. Environ. 32, 367–373. https://doi.org/10.1016/S0360-1323(96)00072-8 (1997).
Hao, J., Cao, P., Liu, Z., Wang, Z. & Xia, S. Developing of a SBS polymer modified bitumen to avoid low temperature cracks in the asphalt facing of a reservoir in a harsh climate region. Constr. Build. Mater. 150, 105–113. https://doi.org/10.1016/j.conbuildmat.2017.05.200 (2017).
CAS  Article  Google Scholar 
Qin, Y., Liang, J., Huang, Z. & Tan, K. Painting the roadway embankment with non-white high reflective pigments to raise the albedo. Environ. Earth Sci. 75, 359. https://doi.org/10.1007/s12665-016-5273-6 (2016).
Article  Google Scholar 
Wang, Q., Fang, J., Zhao, X. & Hu, K. The influence of pavement type on the thermal stability of block-stone embankments in the warm permafrost region. Transp. Geotech. 23, 100334. https://doi.org/10.1016/j.trgeo.2020.100334 (2020).
Article  Google Scholar 
Liu, J., Tai, B. & Fang, J. Ground temperature and deformation analysis for an expressway embankment in warm permafrost regions of the Tibet plateau. Permafrost Periglac. 30, 208–221. https://doi.org/10.1002/ppp.2007 (2019).
Article  Google Scholar 
Wang, S. et al. The temporal effect of distress developments of frozen embankments in the permafrost regions along the Qinghai-Tibet Highway. J. Test. Eval. 47, 3059–3079. https://doi.org/10.1520/JTE20170487 (2018).
Article  Google Scholar 
Qin, Y., Huang, H., Ying, J. & Yang, T. Simulation of short-wave solar radiative transfer across a roadway embankment. Int. J. Heat Mass Tran. 108, 332–340. https://doi.org/10.1016/j.ijheatmasstransfer.2016.11.093 (2017).
Article  Google Scholar 
Qin, Y. & Li, G. Permafrost warming under the earthen roadbed of the Qinghai-Tibet Railway. Environ. Earth Sci. 64, 1975–1983. https://doi.org/10.1007/s12665-011-1014-z (2011).
Article  Google Scholar 
Qin, Y., Zhang, J., Li, G. & Qu, G. Settlement characteristics of unprotected embankment along the Qinghai-Tibet Railway. Cold Reg. Sci. Technol. 60, 84–91. https://doi.org/10.1016/j.coldregions.2009.08.002 (2010).
Article  Google Scholar 
Anderson, D. M. & Tice, A. R. Predicting unfrozen water contents in frozen soils from surface area measurements. High. Res. Rec. 393, 12–18 (1972).
Google Scholar 
Download references
This work is jointly supported by the high-level innovation team and outstanding scholar program in Guangxi colleges and the Science Foundation of Guangxi (No. 2018GXNSFAA294070, 2018GXNSFDA138009).
College of Civil Engineering and Architecture, Guangxi University, 100 University Road, Nanning, 530004, Guangxi, China
Tianyu Wang & Li-E. Yan
The Key Laboratory of Disaster Prevention and Structural Safety of Ministry of Education, Guangxi University, Nanning, 530004, China
Tianyu Wang & Li-E. Yan
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
T.W. and L.Y. wrote the manuscript text together and T.W. prepared the numerical simulation and all figures. All authors reviewed the manuscript.
Correspondence to Tianyu Wang.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Wang, T., Yan, LE. A heat-flux upper boundary for modeling temperature of soils under an embankment in permafrost region. Sci Rep 12, 13295 (2022). https://doi.org/10.1038/s41598-022-17529-w
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-17529-w
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Advanced search
Scientific Reports (Sci Rep) ISSN 2045-2322 (online)
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

source

Taiwan holds live-fire drills as China extends war games – Al Jazeera English

Taiwan’s top diplomat accuses China of simulating an invasion as Taiwanese and Chinese militaries conduct drills in Taiwan Strait.
Taiwan’s military has held live-fire artillery drills simulating a defence of the island as China continued the air and naval exercises it had launched in protest against US House Speaker Nancy Pelosi’s visit to the self-ruled territory.
Taiwanese officials say Tuesday’s drills, which involved soldiers firing howitzer artillery out to sea, had long been scheduled and were not a reaction to China’s unprecedented war games.
Shortly after the hour-long Taiwanese drills ended, China’s Eastern Theater Command announced that it was continuing its exercises in the seas and airspace around Taiwan.
The Reuters news agency, citing an unnamed source, also reported that about 20 Chinese and Taiwanese navy boats were locked in a “standoff” in the Taiwan Strait, with some of the Chinese boats attempting to “press” into the waterway’s median line, the de facto sea border between China and Taiwan.
China claims democratically governed Taiwan, an island of 23 million people, as its own and has called Pelosi’s visit there last week a violation of its sovereignty and a provocation by the United States.
The joint air and sea exercises it launched in response have been its largest in the Taiwan Strait and involved test launches of ballistic missiles over Taipei for the first time. They took place in six zones around the island and were scheduled to run for four days and end on Sunday.
But China’s Eastern Theater Command announced on Monday that it would extend the drills, focusing on anti-submarine and sea assault operations. It said maritime patrol aircraft, fighter jets, helicopters and a destroyer practised locating and attacking targets, including submarines, in the waters off Taiwan.
Tuesday’s drills, it said in a statement, focus on joint blockades and resupply logistics. It did not say when the extended exercises will end.
PLA Eastern Theater Command continued its joint combat training exercises on Tuesday in the waters and airspace around #Taiwan Island, focusing on joint blockade and support. (file pic) pic.twitter.com/o4bCiIdmSv
— People’s Daily, China (@PDChina) August 9, 2022

In the Taiwanese capital, Taipei, foreign minister Joseph Wu accused China of using Pelosi’s visit as an excuse to prepare for an invasion of the island.
“China has used the drills and its military playbook to prepare for the invasion of Taiwan,” he told reporters, calling the war games a “gross violation” of the territory’s rights.
“After the drills conclude, China may try to routinise its action in an attempt to wreck the long-term status quo across the Taiwan Strait,” he said.
Such moves threatened regional security and provided “a clear image of China’s geostrategic ambitions beyond Taiwan”, Wu said, urging greater international support to stop China effectively controlling the strait.
The scale and intensity of the Chinese exercises – as well as its decision to cut some communication with the US – has prompted concern in Washington, but US President Joe Biden has said he does not expect an escalation.
“I’m not worried, but I’m concerned they’re moving as much as they are. But I don’t think they’re going to do anything more than they are,” Biden told reporters at Dover Air Force Base on Monday.
A senior Pentagon official also told Reuters that Washington was sticking to an earlier assessment that Beijing would not try to invade Taiwan in the next two years. Under Secretary of Defense for Policy Colin Kahl said the US military would continue to carry out voyages through the Taiwan Strait in the coming weeks.
China, meanwhile, has defended its behaviour as “firm, forceful and appropriate”.
“[We] are only issuing a warning to the perpetrators,” foreign ministry spokesman Wang Wenbin told a regular briefing, promising China would “firmly smash the Taiwan authorities’ illusion of gaining independence through the US”.
“We urge the US to do some earnest reflection, and immediately correct its mistakes.”
Follow Al Jazeera English:

source

Assessment of thermal distribution through an inclined radiative-convective porous fin of concave profile using generalized residual power series method (GRPSM) | Scientific Reports – Nature.com

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 13275 (2022)
187 Accesses
Metrics details
The thermal distribution in a convective-radiative concave porous fin appended to an inclined surface has been examined in this research. The equation governing the temperature and heat variation in fin with internal heat generation is transformed using non-dimensional variables, and the resulting partial differential equation (PDE) is tackled using an analytical scheme, generalized residual power series method (GRPSM). Moreover, a graphical discussion is provided to examine the consequence of diverse non-dimensional variables including the parameters of convection-conduction, ambient temperature, radiation, heat generation, and porosity effect on the thermal field of the fin. Also, a graph is plotted to analyze the variations in unsteady temperature gradient using the finite difference method (FDM) and generalized residual power series method (GRPSM). The major result of this investigation unveils that as the convection-conduction parameter scale upsurges, the distribution of temperature in the fin diminishes. For the heat-generating parameter, the thermal distribution inside the fin increases.
Heat transfer is the transmission of energy induced by temperature variations and if two systems in contact have different temperatures, heat transfer occurs until thermal equilibrium is reached. The innovation of effective heat transfer liquids with elevated thermal conductivity and heat transfer coefficient is required to improve the efficiency of the heat transmission process and to reduce the cost and size of the relevant modules and devices. The suspension of tiny solid particulate in liquids is an effective method of increasing the thermal conductivity of liquids and thereby enhances the heat transference phenomenon. Using these kinds of liquids, several investigators explored the features of heat transferal1,2,3,4,5,6,7. On the other side, heat transfer is enhanced using the extended surface. Excessive heat is produced in machine parts in several industrial applications, which can lead to a variety of material flaws. Heat transfer through the extended surface of the apparatus is one strategy for avoiding material damage. A fin is an extended surface that is utilized to augment the rate of heat transference from the primary surface to the environment. It has extensive technological applications, namely air-cooled craft engines, compressors, nuclear reactors, heat exchangers, refrigeration, electrical and electronic apparatuses, and so on. Meanwhile, porous material fins have considerable advantages over conventional fins, and their research is one of the most comprehensive topics in the field of mass and energy transference. In the heat transferal scrutiny of permeable material fins, energy and mass transference of both solid and fluid media must be taken into account. Several analyses have been performed to explore efficient and productive methods of heat transferring through permeable finned surfaces. Ndlovu and Moitsheki8 discussed the one-dimensional heat transport and thermal aspects in a moveable porous straight fin of the uniform area of cross-section. With the impact of radiative, magnetic, and convective mechanisms, Madhura et al.9 depicted the features of the thermal field of a permeable longitudinal fin. The sinc collocation method was executed to study the thermal behavior of permeable fin by Nabati et al.10 under the influence of magnetic force. With the implementation of analytical procedures, Kundu and Yook11 determined the analytical approximation of the porous fin and thus investigated the heat transfer features of the considered fin. Considering the local thermal non-equilibrium model, Buonomo et al.12 researched the energy transfer aspects of a permeable rectangular extended surface. Implementing the spectral collocation method, Kumar et al.13 described the temperature and energy variation in a permeable trapezoidal extended surface with radiation phenomenon.
Fins with a non-uniform cross-sectional area, which contribute to a lighter structure, are recommended in airborne and space application fields over heavier rectangular-shaped fins, despite the fact that such lighter fin constructions are more complicated and costlier to produce. Aziz and Fang14 expounded on the thermal variations inside the straight fin of variable thickness. Further heat transfer aspects are discussed by considering various fin profiles namely trapezoidal, rectangular and concave. Using the DTM approach, Torabi et al.15 debriefed the thermal performance of radiative-convective concave profiled fin. The heat transference features of the concave parabolic extended surface were discussed by Kang16. Recently, Wang et al.17 employed the technique of DTM to examine the aspects of energy dissipation through a permeable fin of the inclined surface. The thermal performance and heat flow in a dovetail fin with internal heat production were probed by Goud et al.18. In the presence of convection and radiation, Jagadeesha et al.19 expounded on the thermal performance of a fully wetted semi-spherical fin using a non-Fourier heat conduction model. Several researchers have worked on solving ordinary differential equations using various techniques, including the differential transform method20,21,22,23,24, sinc collocation approach10, finite difference method25, spectral collocation method26,27, least square method28 and among others. Several of these methodologies are computationally complex because they are trial-and-error in nature or involve complicated symbolic calculations. The residual power series method (RPSM) is one of the analytical techniques which is broadly utilized to achieve an approximate solution because it does not necessitate any restrictive assumptions or linearization. This method can be employed effectively to the given problems and it is easier to achieve accurate approximate solutions without more complications. The RPSM is an innovative approach for procuring analytical Taylor series solutions for linear and nonlinear differential equations. As a result of applying the residual error notion, a series solution, as well as a truncated series solution, can be obtained. Arqub et al.29,30 applied the RPSM for solving the initial value problems. Using RPSM, Syam31 discussed the solution of the fractional-order Fredholm integrodifferential equation. Az-Zo’bi32 applied RPSM to analyze the numerical solution of the time-dependent motion of the van der Waals gas model. Refs.33,34,35,36,37,38 highlights the importance of fluid flow regarding various assumption via different geometries.
The majority of the studies were focused on analyzing the one-dimensional thermal distribution of the porous straight fin or fin with a tapered profile, as evidenced by the above investigations. Further numerical and analytical solutions are provided in other cases. Also, there are no detailed analyses with analytical solutions on the unsteady thermal distribution through a tapered inclined fin. Thus, the principal objective of this analysis is to scrutinize the unsteady temperature variance through an inclined concave porous fin with internal heating. Moreover, the temperature profile of the fin has been solved analytically using the generalized residual power series method (GRPSM).
The unsteady thermal performance of permeable concave fin with convection and radiation is studied. (L) and (W) are the length and width of the permeable concave fin with base thickness (t_{b}). The dissipation of heat to the ambient environment occurs due to the effect of radiation and convection at (T_{a}). The fin which is attached to an inclined surface at an angle (alpha) is considered in this analysis, as demonstrated in Fig. 1. It is assumed that the porous medium is saturated with a single phase, homogeneous, and isotropic fluid. Darcy’s model characterizes the interaction of a porous medium and fluid media. Another implication involves that the fin’s thickness is small in comparison to its length. The temperature inside the fin is also presumed to vary only in the x-direction, with the temperature variation in the y-direction being small enough to ignore.
Physical depiction of an inclined concave parabolic fin.
The transient energy transmission with the above-mentioned assumption is stated by the following governing equation (Torabi et al.15, and Ma et al.39):
where (h^{*}) is the convective heat transfer coefficient, (q^{*} (T)) signifies internal heat generation, (rho) is the density, (sigma) indicates Stefan–Boltzmann constant, (g) symbolizes acceleration due to gravity, (K) is the permeability, (c_{p}) represents specific heat, and (t(x) = left[ {Lambda left( {left( frac{x}{L} right)^{2} – 1} right) + t_{b} } right]) is the local semi-fin thicknesses.
The internal heat generation is presumed to be a function of temperature:
where, (q_{a}) denotes heat generation at ambient temperature, and (xi) is the heat generation parameter. As this analysis considers a finite-length fin with an insulated tip, there will be no heat flow through the tip of the fin. Thus, the relevant boundary conditions (BCs) for Eq. (1) are:
The appropriate non-dimensional terms involved in this study are:
Equation (1) and BCs are transformed to a non-dimensional form using Eq. (2) and Eq. (4) to yield,
The above equation includes radiation-conduction parameter (Nr) which is directly associated with the surface emissivity, fin taper ratio (C) that describes the concave tapered profile, convection-conduction parameter (Nc) is the ratio of convention to conduction, internal heat production parameter (Q), and porosity parameter (S_{H}).
Simultaneously with the help of Eq. (4), Eq. (3) yields,
Let (F) be a function of two variables (x) and (t) i.e.(F(x,t)) and consider the following PDE,
with initial and boundary conditions,
where, (Omega) is a differential operator and (g) denotes the source term.
Assume that the solution of Eq. (7) has the power series in the form shown below
Rewriting the Eq. (7) yields
To evaluate the coefficient functions, (Y_{i} (x),,,,i = 0 ldots k), kth residual function is defined as
Reiterating this operation to find the nth-truncated solution yields
Rearrange the Eq. (5) as:
Let the series solution be in the form
Applying the GRPSM to Eq. (13) gives
To obtain the coefficients (Psi_{k} left( X right),,,k = 1,2,3, ldots ,m), replace (k)th a truncated series of (Theta left( {X,tau^{*} } right)) in Eq. (15), and apply the below derivative formula on ({text{Re}} s^{k} left( {X,tau^{*} } right)) (Modanli et al.40),
For simplificantion, the values for the corresponding parameters are taken as (Nc = 2), (S_{H} = 0.5), (Nr = 3), (Theta_{a} = 0.2), (k_{r} = 0.1), (C = 0.1), (phi = 0.1), (gamma = 0.2), (Q = 0.8) and (alpha = {pi mathord{left/ {vphantom {pi 6}} right. kern-nulldelimiterspace} 6}). Upon substituting these values and with the use of BCs the coefficients of (Psi_{k} left( X right),;k = 1,2,3, ldots ,8) are determined,
Express the above coefficients in a truncation series and ({text{M}} = 0.5937942627) is the value obtained with the help of BC. Using the achieved (k)th truncated series in Eq. (14), the final series solution of the fin problem is represented as
An internal heat generation, natural convection, and radiation impact are taken into account in formulating the unsteady thermal model of an inclined concave porous fin. Equation (1) expresses the corresponding balanced heat equation and is converted to a PDE using dimensionless terms along with BCs. The obtained equation discloses that dimensionless parameters effect the thermal distribution of a porous fin. Subsequently, Eq. (5) is derived analytically using the elementary properties of the proposed technique. For the analysis of the inclination effect, Table 1 is provided to witness the variation in the transient thermal profile (Theta left( {X,tau^{*} } right)) of the inclined porous fin with respect to different angles of inclination (alpha). It is detected from this table, that thermal distribution diminishes from base to tip of the porous fin for all non-dimensional variables considered in the study (Nc = 1), (S_{H} = 10), (Nr = 1), (Theta_{a} = 0.1), (k_{r} = 0.1), (C = 0.1), (phi = 0.1), (gamma = 0.1), (Q = 0.8) at different values of inclination angle. The thermal profile signifies greater thermal distribution at (alpha = 0), resulting in a lower rate of heat transfer. Meanwhile, as the (alpha) value is modified ((alpha = {pi mathord{left/ {vphantom {pi 6}} right. kern-nulldelimiterspace} 6},,{pi mathord{left/ {vphantom {pi 3}} right. kern-nulldelimiterspace} 3},{pi mathord{left/ {vphantom {pi 2}} right. kern-nulldelimiterspace} 2})), the thermal profile of the fin reveals decreasing characteristics at all locations of fin length. The consequence of the aforementioned dimensionless parameters on the thermal gradient (Theta left( {tau^{*} ,X} right)) of the fin is graphically examined in this section. The nonlinear PDE (Eq. (5)) is solved using the finite difference method (FDM) technique in the domain (0 le X le L) and (0 le tau^{*} le T). Along with uniform mesh, the finite-difference approximation is applied in the direction of (X) and the step size of time and space domains are chosen as (Delta tau^{*} = Delta X = 0.001). Further, the present analysis (GRPSM) is compared with the numerical result (FDM) as displayed in Fig. 2 and they are found to be in excellent agreement. The significance of dimensionless parameters on the temperature deviance of the fin has been portrayed in Figs. 3, 4, 5, 6 and 7.
Validation of the present result with the numerical method.
(a) Nature of (Theta left( {X,tau^{*} } right)) for various (Nc) values (b) Nature of (Theta left( {X,tau^{*} } right)) for various (Nr) values.
(a) Nature of (Theta left( {X,tau^{*} } right)) for various (Theta_{a}) values (b) Nature of (Theta left( {X,tau^{*} } right)) for various (S_{H}) values.
(a) Nature of (Theta left( {X,tau^{*} } right)) for various (Q) values (b) Nature of (Theta left( {X,tau^{*} } right)) for various τ* values.
(a) Nature of (Theta left( {X,tau^{*} } right)) for (tau^{*} = 0.1) (b) Nature of (Theta left( {X,tau^{*} } right)) for various (tau^{*} = 0.3).
(a) Nature of (Theta left( {X,tau^{*} } right)) of solid non-porous fin (b) Nature of (Theta left( {X,tau^{*} } right)) of porous fin.
The impact of convective parameter (Nc) on the temperature distribution of the concave fin is seen in Fig. 3a for (S_{H} = 0.5), (Nr = 1), (Theta_{a} = 0.1), (k_{r} = 0.1), (phi = 0.1), (gamma = 0.1), (alpha = {pi mathord{left/ {vphantom {pi 6}} right. kern-nulldelimiterspace} 6}), (Q = 0.8), and (tau^{*} = 0.5) by considering different (C) values ((C = 0.1,{text{and}},C = 0.3)). It is detected that with a rise in the convective parameter ((Nc = 1,,3,,5)) thermal profile decreases. This is due to the effect of the natural convection on the concave surface of the fin. The convection will carry the heat on fin surface and hence helps in decreasing the heat and aids in fin cooling. With all the considered parameter (Nc = 1), (S_{H} = 0.6), (Theta_{a} = 0.2), (k_{r} = 0.1), (phi = 0.1), (gamma = 0.1), (alpha = {pi mathord{left/ {vphantom {pi 6}} right. kern-nulldelimiterspace} 6}), (Q = 0.8), Fig. 3b displays the impact of radiative parameter (Nr) on the thermal performance of the concave fin. The radiative parameter exhibits the same nature as that of the convective parameter, i.e., a decrease in temperature profile with increase in (Nr) (2, 4, 6). The radiation effect increases the transfer of heat from fin surface to the surrounding. Therefore, the reduction in temperature has been observed with rising in radiation parameter. The significance of ambient temperature (Theta_{a} left( {0,,0.3,,0.5} right)) on the fin thermal field of a concave inclined porous fin with (Nc = 1), (S_{H} = 0.2), (Nr = 1), (k_{r} = 0.1), (phi = 0.1), (gamma = 0.1), (alpha = {pi mathord{left/ {vphantom {pi 6}} right. kern-nulldelimiterspace} 6}), (Q = 0.8), and (tau^{*} = 0.5) is exhibited in Fig. 4a. The enhancement in ambient temperature results in an increase in thermal profile. This is because, (Theta_{a}) is the ratio of surrounding temperature to base temperature. Hence, with augment in (Theta_{a}) there is a decrease in the transmission of heat from fin surface to surrounding which leads to the increase in thermal profile. By setting (Nc = 2), (Nr = 1), (Theta_{a} = 0.3), (k_{r} = 0.1), (phi = 0.1),(gamma = 0.1) , (alpha = {pi mathord{left/ {vphantom {pi 6}} right. kern-nulldelimiterspace} 6}), (Q = 0.7), and (tau^{*} = 0.5), the effect of (S_{H}) on (Theta) of the fin has been revealed in Fig. 4b. The enhancement in (S_{H}) ((1,,3,,5)) leads to the reduction in the temperature profile. This is due to the fact that the porosity parameter helps in better interaction of surrounding air with the pores of the fin. Hence the porosity parameter helps in the fin cooling effect. The consequences of heat generation parameter (Q) on the (Theta) of the fin have been depicted in Fig. 5a with (Nc = 1), (S_{H} = 0.3), (Nr = 1), (Theta_{a} = 0.2), (k_{r} = 0.1), (phi = 0.1), (gamma = 0.1), (alpha = {pi mathord{left/ {vphantom {pi 6}} right. kern-nulldelimiterspace} 6}), and (tau^{*} = 0.5). Here the augment in (Q) ((0,,0.4,,0.8)) enlarges the thermal value along the axial length of the fin because of the presence of internal heat within the fin. The internal heat enhances the fin surface temperature therefore it decreases the rate of cooling from the surface of the fin. Figure 5b explicates the impact of (tau^{*}) on (Theta) of the concave porous fin. As the (tau^{*}) ((0.2,,0.3,,0.4)) values increase, the temperature improves remarkably under the consideration of (Nc = 1), (S_{H} = 0.1), (Nr = 1), (Theta_{a} = 0.1), (k_{r} = 0.1), (phi = 0.1), (gamma = 0.1), (alpha = {pi mathord{left/ {vphantom {pi 6}} right. kern-nulldelimiterspace} 6}), (Q = 0.8). Figure 6a and b demonstrate the variation in the unsteady thermal distribution of the concave inclined porous fin as a function of time in a three-dimensional (3D) plot for (Nc = 1), (S_{H} = 0.1), (Nr = 1), (Theta_{a} = 0.1), (k_{r} = 0.1), (C = 0.3), (phi = 0.1), (gamma = 0.1), (alpha = {pi mathord{left/ {vphantom {pi 6}} right. kern-nulldelimiterspace} 6}), and (Q = 0.8). In particular, in Fig. 6a, the value of (tau^{*}) is picked as 0.1, and for this value, a decrement in thermal variation has been discovered, whereas an increment in thermal variation is recognized for (tau^{*} = 0.3), as exhibited in Fig. 6b. A comparison of the thermal profile values of the concave inclined solid and porous fin has been performed to uphold the significance of modeled fin problem. For a better interpretation of the thermal variation of the concave inclined porous and solid fin, Fig. 7a and b are plotted when the parameter values are set to (Nc = 1), (Nr = 1), (Theta_{a} = 0.1), (k_{r} = 0.1), (C = 0.1), (gamma = 0.1), (alpha = {pi mathord{left/ {vphantom {pi 6}} right. kern-nulldelimiterspace} 6}), (Q = 0.8), and (tau^{*} = 0.5). At (X = 0), the thermal field value of the solid fin (left( {S_{H} = phi = 0} right)) is comparatively higher than the porous fin (left( {S_{H} = 10,,phi = 0.1} right)) and the same behavior is observed at all the considered values of (X) (0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6). Thus, it is deduced that the porous fin helps in thermal dissipation and thereby provides a higher heat transfer rate. The effect of the fin taper ratio is recognizable in all of the aforementioned thermal investigation cases, and it is determined that the temperature inside the fin decreases as the scale of (C) (0.1, 0.3) increases.
The current study explains transient thermal dispersion in a concave permeable fin exposed to convective-radiative heat transfer. The governing equation is nondimensionalized by employing non-dimensional terms, and the arising PDE is solved analytically using the GRPSM. The consequences of significant non-dimensional factors on the temperature gradient are also depicted utilizing graphical portrayal. The following are some of the most significant study results of the present research:
Unlike prior investigation, the heat transfer performance of the fin is effected not only by the radiation and convection mechanisms but also by the fin taper ratio, and inclination of the primary surface.
The thermal dispersal in the porous fin is elevated in increasing time.
With a greater level of fin taper ratio, the fin undergoes diminishing thermal dispersal.
As the convection-conduction and porosity parameter values rise, the thermal dispersal in the fin declines.
The temperature profile of the fin exhibits an enhanced nature for the raised heat-generating parameter.
The thermal dispersal in the fin drops as the magnitude of the radiation-conduction attribute rises.
It may be highly beneficial to a designer to select the tapered fin design with an inclined vertical surface for thermal effectiveness in a practical application such as latent heat thermal energy storage systems.
GRPSM provides an analytical solution for nonlinear differential equations and the obtained outcomes in this research work are in close agreement with numerical ones. The exactness of the proposed method signifies that GRPSM is an alternative to other techniques for solving nonlinear PDEs.
All the data are clearly available in the manuscript.
Thermal conductivity
Convection–conduction parameter
Angle of inclination
Time
Emissivity
Stefan–Boltzmann constant
Acceleration due to gravity
Fin taper
Permeability
Specific heat
Radiation–conduction parameter
Convective heat transfer coefficient
Density
Width of the fin
Non-dimensional temperature
Local semi-fin thicknesses
Porosity
Fin taper ratio
Semi-base thickness
Fin’s length (dimensionless)
Internal heat generation parameter (dimensionless)
Porosity parameter
Length of the fin
Time(dimensionless)
Internal heat generation
Volumetric expansion index
Fin axial distance
Temperature
Ambient
Base
Solid
Relative quantity
Aly, E. H. & Pop, I. MHD flow and heat transfer near stagnation point over a stretching/shrinking surface with partial slip and viscous dissipation: Hybrid nanofluid versus nanofluid. Powder Technol. 367, 192–205 (2020).
CAS  Article  Google Scholar 
Song, Y.-Q. et al. Bioconvection analysis for Sutterby nanofluid over an axially stretched cylinder with melting heat transfer and variable thermal features: A Marangoni and solutal model. Alex. Eng. J. 60, 4663–4675 (2021).
Article  Google Scholar 
Bilal, M., Arshad, H., Ramzan, M., Shah, Z. & Kumam, P. Unsteady hybrid-nanofluid flow comprising ferrousoxide and CNTs through porous horizontal channel with dilating/squeezing walls. Sci. Rep. 11, 12637 (2021).
ADS  CAS  Article  Google Scholar 
Madhukesh, J. et al. Physical insights into the heat and mass transfer in Casson hybrid nanofluid flow induced by a Riga plate with thermophoretic particle deposition. Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng. https://doi.org/10.1177/09544089211039305 (2021).
Article  Google Scholar 
Waini, I., Ishak, A., Pop, I. & Nazar, R. Dusty hybrid nanofluid flow over a shrinking sheet with magnetic field effects. Int. J. Numer. Methods Heat Fluid Flow 32, 1067–1091 (2021).
Article  Google Scholar 
Nadeem, M., Siddique, I., Awrejcewicz, J. & Bilal, M. Numerical analysis of a second-grade fuzzy hybrid nanofluid flow and heat transfer over a permeable stretching/shrinking sheet. Sci. Rep. 12, 1631 (2022).
ADS  CAS  Article  Google Scholar 
Algehyne, E. A. et al. Investigation of thermal performance of Maxwell hybrid nanofluid boundary value problem in vertical porous surface via finite element approach. Sci. Rep. 12, 2335 (2022).
ADS  CAS  Article  Google Scholar 
Ndlovu, P. L. & Moitsheki, R. J. Steady state heat transfer analysis in a rectangular moving porous fin. Propuls. Power Res. 9, 188–196 (2020).
Article  Google Scholar 
Madhura, K. R., Kalpana, G. & Makinde, O. D. Thermal performance of straight porous fin with variable thermal conductivity under magnetic field and radiation effects. Heat Transf. 49, 5002–5019 (2020).
Article  Google Scholar 
Nabati, M., Jalalvand, M. & Taherifar, S. Sinc collocation approach through thermal analysis of porous fin with magnetic field. J. Therm. Anal. Calorim. 144, 2145–2158 (2021).
CAS  Article  Google Scholar 
Kundu, B. & Yook, S.-J. An accurate approach for thermal analysis of porous longitudinal, spine and radial fins with all nonlinearity effects: Analytical and unified assessment. Appl. Math. Comput. 402, 126124 (2021).
MathSciNet  MATH  Google Scholar 
Buonomo, B., Cascetta, F., Manca, O. & Sheremet, M. Heat transfer analysis of rectangular porous fins in local thermal non-equilibrium model. Appl. Therm. Eng. 195, 117237 (2021).
Article  Google Scholar 
Varun Kumar, R. S., Sarris, I. E., Sowmya, G., Madhukesh, J. K. & Prasannakumara, B. C. Effect of electromagnetic field on the thermal performance of longitudinal trapezoidal porous fin using DTM-Pade approximant. Heat Transf. 51, 3313–3333 (2022).
Article  Google Scholar 
Aziz, A. & Fang, T. Alternative solutions for longitudinal fins of rectangular, trapezoidal, and concave parabolic profiles. Energy Convers. Manag. 51, 2188–2194 (2010).
Article  Google Scholar 
Torabi, M., Aziz, A. & Zhang, K. A comparative study of longitudinal fins of rectangular, trapezoidal and concave parabolic profiles with multiple nonlinearities. Energy 51, 243–256 (2013).
Article  Google Scholar 
Kang, H. S. Analysis of a concave parabolic fin with vertically cutting fin tip and variable fin base thickness. Int. J. Heat Mass Transf. 173, 121258 (2021).
Article  Google Scholar 
Wang, F. et al. LSM and DTM-Pade approximation for the combined impacts of convective and radiative heat transfer on an inclined porous longitudinal fin. Case Stud. Therm. Eng. 35, 101846. https://doi.org/10.1016/j.csite.2022.101846 (2022).
Article  Google Scholar 
Goud, J. S. et al. Role of ternary hybrid nanofluid in the thermal distribution of a dovetail fin with the internal generation of heat. Case Stud. Therm. Eng. 35, 102113 (2022).
Article  Google Scholar 
Jagadeesha, K. C. et al. A physical depiction of a semi-spherical fin unsteady heat transfer and thermal analysis of a fully wetted convective-radiative semi-spherical fin. J. Indian Chem. Soc. https://doi.org/10.1016/j.jics.2022.100457 (2022).
Article  Google Scholar 
Das, R. & Kundu, B. New forward and inverse solutions for wet fins generalized profiles with all nonlinear phenomena. J. Heat Transf. 143 (2020).
Zeeshan, A., Arain, M. B., Bhatti, M. M., Alzahrani, F. & Beg, O. A. Radiative bioconvection nanofluid squeezing flow between rotating circular plates: Semi-numerical study with the DTM-Padé approach. Mod. Phys. Lett. B (2021).
John Christopher, A., Magesh, N., Punith Gowda, R. J., Naveen Kumar, R. & Varun Kumar, R. S. Hybrid nanofluid flow over a stretched cylinder with the impact of homogeneous–heterogeneous reactions and Cattaneo-Christov heat flux: Series solution and numerical simulation. Heat Transf. 50, 3800–3821 (2021).
Article  Google Scholar 
El Ibrahimi, M. & Samaouali, A. Closed-form approximate solution for heat transfer analysis within functionally graded plate with temperature-dependent thermal conductivity. Compos. Struct. 271, 114140 (2021).
Article  Google Scholar 
Sowmya, G., Varun Kumar, R. S., Alsulami, M. D. & Prasannakumara, B. C. Thermal stress and temperature distribution of an annular fin with variable temperature-dependent thermal properties and magnetic field using DTM-Pade approximant. Waves Random Complex Media 0, 1–29 (2022).
Varun Kumar, R. S. et al. Exploration of transient heat transfer through a moving plate with exponentially temperature-dependent thermal properties. Waves Random Complex Media 0, 1–19 (2022).
Sun, Y. et al. Investigation of transient coupled conduction and radiation heat transfer in the linearly anisotropic scattering cylindrical medium by spectral collocation method. Int. J. Therm. Sci. 172, 107308 (2022).
Article  Google Scholar 
Weera, W. et al. Convective-radiative thermal investigation of a porous dovetail fin using spectral collocation method. Ain Shams Eng. J. 7, 101811. https://doi.org/10.1016/j.asej.2022.101811 (2022).
MathSciNet  Article  Google Scholar 
Biswal, U., Chakraverty, S., Ojha, B. K. & Hussein, A. K. Numerical simulation of magnetohydrodynamics nanofluid flow in a semi-porous channel with a new approach in the least square method. Int. Commun. Heat Mass Transf. 121, 105085 (2021).
CAS  Article  Google Scholar 
Abu Arqub, O., Abo-Hammour, Z., Al-Badarneh, R. & Momani, S. A reliable analytical method for solving higher-order initial value problems. Discrete Dyn. Nat. Soc. 2013, e673829 (2013).
MathSciNet  Article  Google Scholar 
Abu Arqub, O., El-Ajou, A., Bataineh, A. S. & Hashim, I. A representation of the exact solution of generalized lane-emden equations using a new analytical method. Abstr. Appl. Anal. 2013, e378593 (2013).
MathSciNet  Article  Google Scholar 
Syam, M. I. Analytical Solution of the Fractional Fredholm Integrodifferential Equation Using the Fractional Residual Power Series Method. Complexity 2017, e4573589 (2017).
MathSciNet  Article  Google Scholar 
Az-Zo’bi, E. A., Yıldırım, A. & AlZoubi, W. A. The residual power series method for the one-dimensional unsteady flow of a van der Waals gas. Phys. Stat. Mech. Appl. 517, 188–196 (2019).
MathSciNet  Article  Google Scholar 
Chu, Y. M., Nazir, U., Sohail, M., Selim, M. M. & Lee, J. R. Enhancement in thermal energy and solute particles using hybrid nanoparticles by engaging activation energy and chemical reaction over a parabolic surface via finite element approach. Fractal Fract. 5, 17 (2021).
Article  Google Scholar 
Zhao, T. H. et al. A fuzzy-based strategy to suppress the novel coronavirus (2019-NCOV) massive outbreak. Appl. Comput. Math 20, 160–176 (2021).
MathSciNet  MATH  Google Scholar 
Nazeer, M. et al. Theoretical study of MHD electro-osmotically flow of third-grade fluid in micro channel. Appl. Math. Comput. 420, 126868 (2022).
MathSciNet  MATH  Google Scholar 
Chu, Y. M. et al. Combined impact of cattaneo-christov double diffusion and radiative heat flux on bio-convective flow of maxwell liquid configured by a stretched nano-material surface. Appl. Math. Comput. 419, 126883 (2022).
MathSciNet  MATH  Google Scholar 
Zhao, T. H., Khan, M. I. & Chu, Y. M. Artificial neural networking (ANN) analysis for heat and entropy generation in flow of non-Newtonian fluid between two rotating disks. Math. Methods Appl. Sci. https://doi.org/10.1002/mma.7310 (2021).
Article  Google Scholar 
Khan, N. M., Chu, Y. M., Khan, M. I., Kadry, S. & Qayyum, S. Modeling and dual solutions for magnetized mixed convective stagnation point flow of upper convected Maxwell fluid model with second-order velocity slip. Math. Methods Appl. Sci. https://doi.org/10.1002/mma.6824 (2020).
Article  Google Scholar 
Ma, J., Sun, Y. & Li, B. Simulation of combined conductive, convective and radiative heat transfer in moving irregular porous fins by spectral element method. Int. J. Therm. Sci. 118, 475–487 (2017).
CAS  Article  Google Scholar 
Modanli, M., Abdulazeez, S. T. & Husien, A. M. A residual power series method for solving pseudo hyperbolic partial differential equations with nonlocal conditions. Numer. Methods Partial Differ. Equ. 37, 2235–2243 (2021).
MathSciNet  Article  Google Scholar 
Download references
The authors acknowledge the financial support provided by the Center of Excellence in Theoretical and Computational Science (TaCS-CoE), KMUTT. This research was funded by National Science, Research and Innovation Fund (NSRF), and King Mongkut’s University of Technology North Bangkok with Contract no. KMUTNB-FF-65-24. The authors would like to thank the Deanship of Scientific Research at Umm Al-Qura University for supporting this work by Grant Code: 22UQU4331317DSR18.
Department of Mathematics, Davangere University, Davangere, Karnataka, 577002, India
R. S. Varun Kumar & B. C. Prasannakumara
Department of Mathematics, M S Ramaiah Institute of Technology, Bangalore, Karnataka, 560054, India
G. Sowmya
Department of Information Technology, University of Technology and Applied Sciences, Al Mussanah, Sultanate of Oman
M. C. Jayaprakash
Department of Mathematics and Statistics, Riphah International University, I-14, Islamabad, 44000, Pakistan
M. Ijaz Khan
Nonlinear Analysis and Applied Mathematics (NAAM)-Research Group, Department of Mathematics, Faculty of Sciences, King Abdulaziz University, P.O. Box 80203, Jeddah, 21589, Saudi Arabia
M. Ijaz Khan
Mechanical Engineering Department, College of Engineering and Islamic Architecture, Umm Al-Qura University, P.O. Box 5555, Makkah, 21955, Saudi Arabia
Kamel Guedri
Center of Excellence in Theoretical and Computational Science (TaCS-CoE), KMUTT Fixed Point Research Laboratory, Room SCL 802 Fixed Point Laboratory, Science Laboratory Building, Departments of Mathematics, Faculty of Science, King Mongkut’s University of Technology Thonburi (KMUTT), 126 Pracha-Uthit Road, Bang Mod, Thung Khru, Bangkok, 10140, Thailand
Poom Kumam
Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, 40402, Taiwan
Poom Kumam
Intelligent and Nonlinear Dynamic Innovations Research Center, Department of Mathematics, Faculty of Applied Science, King Mongkut’s University of Technology North Bangkok (KMUTNB), 1518, Wongsawang, Bangsue, Bangkok, 10800, Thailand
Kanokwan Sitthithakerngkiet
Mechanical Engineering Department, College of Engineering, Prince Sattam Bin Abdulaziz University, Wadi ad-Dawasir, 11991, Saudi Arabia
Ahmed M. Galal
Production Engineering and Mechanical Design Department, Faculty of Engineering, Mansoura University, P.O. 35516, Mansoura, Egypt
Ahmed M. Galal
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
Conceptualization: R.S.V.K. and G.S., methodology: M.I.K. and M.C.J.; writing-original draft preparation K.G. and B.C.P., writing-review and editing: K.S. and A.M.G.; funding acquisition: P.K., investigation, supervision: B.C.P. and M.I.K. All authors have read and agreed to the published version of the manuscript.
Correspondence to Poom Kumam or Ahmed M. Galal.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Varun Kumar, R.S., Sowmya, G., Jayaprakash, M.C. et al. Assessment of thermal distribution through an inclined radiative-convective porous fin of concave profile using generalized residual power series method (GRPSM). Sci Rep 12, 13275 (2022). https://doi.org/10.1038/s41598-022-15396-z
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-15396-z
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Advanced search
Scientific Reports (Sci Rep) ISSN 2045-2322 (online)
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

source

StarX MusicX Lab Enters the era of Digital Content Creation with the Release of Its First AI-composed Songs – Yahoo Finance

BEIJING, July 19, 2022 /PRNewswire/ — Kunlun Tech’s social entertainment platform StarX MusicX Lab, specializing in AI composition, recently released five songs, all of which were composed by AI software. The five AI-generated content (AIGC) compositions are now available on more than 180 music platforms worldwide including Spotify, SoundClould, QQ Music and NetEase Cloud Music.
Music labels, singers and music producing organizations have started to use the AIGC songs StarX MusicX Lab produced. The songs, many of which have been recorded by mainstream artists in Indonesia and Malaysia, are already proving popular on StarX’s entertainment social platform StarMaker.
In the Web3.0 era, a new generation of platforms is on the rise. “AIGC is emerging as a key player in this new form of content creation,” says Kunlun Tech CEO Han Fang. “To this end, StarX MusicX Lab has started rolling out AIGC songs, providing a new kind of AI application scenario and giving us the freedom to let our imagination fly in terms of what is possible when it comes to content creation.”
The efforts by StarX MusicX Lab marked a material change in how AI-composed audio is produced. With the latest technological advances now having been converted into applications, AI can do what is truly imaginative, making a contribution to the harmony between the virtual and real worlds. Over time, more AI-originated creations are bound to go mainstream.
Based on AI application scenarios, the Lab is a part of Kunlun Tech dedicated to developing AI-composed musical tracks. With sophisticated and professional full-chain music production and worldwide distribution capabilities, the platform is able to deliver high-quality singles, soundtracks and ambient music to the four corners of the globe.
The Lab is equipped with a highly-efficient and low-cost AI composer, which provides creators with the capability of producing multiple forms of content, no matter whether what is created is destined for an application in social media, gaming and entertainment, film and television production, or a marketing campaign.
With the development and improvement of AI technology, AIGC will be more helpful than ever in terms of content creation by improving the efficiency and diversity of content production, while offering more dynamic and interactive content. The massive virtual world that is the Metaverse spans a wide range of sectors including AI, gaming and social media, among many others. In the medium and long term, AIGC can be expected to bring innovation to the virtual world and enhance the co-prosperity of all links in the industry chain by identifying and leveraging new growth points.
The next stages of development in the Metaverse require not only technological progress, but also content-side support. In 2021, Kunlun Tech completed its Metaverse portfolio and the build out if its AI-driven applications for social entertainment and information distribution. As AIGC evolves, the Metaverse business will serve as a new contributor to Kunlun Tech’s exponential growth.
China’s top Internet firms, including Byte and Baidu, have already entered and are quickly making progress in the realm of AIGC, while StarX MusicX Lab has already taken the lead in related technologies.
The digital human ecology built around the virtual world and the Metaverse infrastructure has begun to take shape, and so did the music ecology built around the new media of the Internet. The wide application of AI technologies will dramatically change how content is created. As AIGC evolves, StarX MusicX Lab will continue to expand its business footprint, as the firm further improves its creation capabilities, while producing exclusive songs for the world’s influencers.
Supported by increasingly stronger computing power, AI that features self-computing and greater adaptability will be a perfect match for content production needs by unleashing the vitality of content creation and by making the creative space more diverse and dynamic. With the popularity of AI products and the growing demands of fans, StarX’s creative content destined for application in the entertainment, audio, and social media sectors is bound to have even greater potential and room for development.
SOURCE Kunlun Tech
Tesla CEO Elon Musk raised the stakes in his court battle with Twitter on Friday, filing a counter lawsuit that accuses the social media company of fraud.
Apple and Amazon have thrown billions of dollars at sports media rights over the last few months, outbidding traditional competitors and spiraling the streaming wars into its next stage of battle.
Warner Bros. Discovery's recent HBO Max retreat may signal good things to come for competitor Netflix.
Box office receipts hit a nearly three-month low this weekend, but there's still time for a Hollywood ending.
AMC CEO Adam Aron has become a hero to retail investors amid the meme stock era, but one analyst argues that a new offering of AMC Preferred Equity (APE) shares is disingenuous and ultimately bad for investors.
After the company's sale setback, Kohl's is pivoting toward inclusion, premier denim, and a whole new fashion attitude.
Singer Nolan Neal, who was a contestant on both America’s Got Talent and The Voice has died. He was 41. Neal was found dead in his Nashville apartment on Monday, July 18, with no cause of death yet determined. That said, he did have a self-admitted history of drug abuse. His passing was announced …
So many things I saw on Ugly Betty were a lie.View Entire Post ›
Is "The Miz" in a new documentary series about Woodstock '99? Eagle-eyed viewers of Netflix’s recent three-part documentary series “Trainwreck: Woodstock ‘99” raised their eyebrows during the first few moments of Episode 1 when the camera passes over the crowd and a young, shirtless man who looks an awful lot like the Miz shouts “Woodstock ‘99 baby, yeah!” directly into the camera. The documentary series is the latest to explore the disastrous music festival that took place in 1999, three years
The star of Marvel's "She-Hulk" isn't afraid to use her clout to support trans rights, VFX artists facing "incredibly difficult" conditions and more.
News Corporation's (NWSA) better-than-expected fourth-quarter fiscal 2022 results are driven by gains from revenue growth across most segments and contributions from the recent buyouts.
When looking for the best artificial intelligence stocks to buy, identify companies using AI technology to improve products or gain a strategic edge, such as Google, Microsoft and Nvidia.
Are BTS's J-Hope and model Irene Kim more than just friends?
'Jeopardy!' is airing reruns while the quiz show is currently on hiatus before new episodes. 'Jeopardy!' fans had strong reactions to seeing Matt Amodio again before the 2022 Tournament of Champions.
The Tasty singer replied to Bey Hive members on social media.
The changes will let users silently leave group chats and control who sees their online status.
After reports that the Queen had invited Meghan Markle and Prince Harry to Balmoral, sources claim the Sussexes haven't been invited after all.
Pitt apparently has a "good list" and a "s**t list" for actors he's worked with over his career, according to his co-star.
Thought it’s only been a little over a week since Beyoncé dropped her seventh studio album Renaissance, the long-awaited project has already further cemented Queen Bey’s status in history as it’s landed at the number one spot on the Billboard 200 album chart.
'Grease' actor Eddie Deezen cannot face trial for his charges of assault because he is not mentally fit, according to a state order. Deezen was arrested in April.

source

Live news updates from August 8: China continues military drills around Taiwan, Falling tech stocks send SoftBank to $23.3bn loss – Financial Times

Expert insights, analysis and smart data help you cut through the noise to spot trends, risks and opportunities.
Join over 300,000 Finance professionals who already subscribe to the FT.
Then $69 per month
New customers only
Cancel anytime during your trial
OR
BEST VALUE – SAVE 20%
Then $74.75 every 3 months
Sign in
Check if your university has an FT membership to read for free.
We use cookies for a number of reasons, such as keeping FT Sites reliable and secure, personalising content and ads, providing social media features and to analyse how our Sites are used.
International Edition

source

The best places to live in North America – The Economist

For a look behind the scenes of our data journalism, sign up to Off the Charts, our weekly newsletter
OVER 630,000 people moved to North America from other parts of the world in the first half of 2022, a rise of 51% from the same period a year earlier. It is easy to see why. The region is home to some of the world’s most “liveable” cities, according to an index by EIU, our sister company. It ranks living conditions in 172 cities around the world, taking into account more than 30 factors related to education, culture, the environment, health care, infrastructure and stability. This year, every city in North America included in the index scored above 80 (out of 100), with an average of 88. That makes North America the second-most “liveable” region in the world, narrowly behind Western Europe. Which of its cities stood out?
Those looking for a new home may want to consider Calgary. The Canadian city scored 96 points, the most of any North American city in the region. It is not its first time at the top: Calgary has come first in the region twice before in the past decade. Vancouver, Toronto and Montreal filled the next three spots. Residents of all four Canadian cities enjoy top scores for health care and education. Canada’s rollout of covid-19 vaccine boosters and the quick reopening of schools during the pandemic aided its high marks.
The top ranked city in the United States was Atlanta, which came fifth overall. Los Angeles, the region’s biggest climber, rose to ninth place from 15th, thanks to big gains in the culture and environment category after it eased capacity restrictions for venues in February. New York, meanwhile, remained close to the bottom in 21st place—two below its pre-pandemic rank. The city scored poorly on stability and infrastructure (as New Yorkers worried about high crime rates or stuck on an ageing subway will understand). Mexico is not included in EIU’s North American index, but its cities were among the bottom 50 of the global survey. When it comes to liveability, it seems the further north you go the better. ■
A look at excess deaths suggest summers will become more deadly as temperatures rise
The country wants to resume its pre-war export levels by the autumn
The overturning of Roe v Wade has also pushed Democrats and women to the polls
Published since September 1843 to take part in “a severe contest between intelligence, which presses forward, and an unworthy, timid ignorance obstructing our progress.”
Copyright © The Economist Newspaper Limited 2022. All rights reserved.

source

Shambhala Music Festival Was an Extraordinary Experience – EDM Identity

Shambhala Music Festival this year was an incredible experience and worth the three years it took to come back to fruition. To give an accurate review of this year’s Shambhala, you must know what Shambhala encompasses. Shambhala music festival is a 3-day festival at the Salmo River Ranch in the gorgeous forests of British Columbia.
Though it’s advertised as a three-day festival, attendees can arrive as early as Tuesday, leave as late as the following Tuesday, and most do. This is an excellent way for attendees to beat the line traffic getting in, meet their neighbors, and decompress and sleep after the festival to prepare to drive home. Music starts Thursday, but sound camps throughout the campgrounds go all hours. Having been unable to attend Shambhala since 2019, I was excited to make my way back to the festival – and I was impressed by the experience.
Even with all the additional days to enter, it’s been anywhere from three to upwards of 16 hours with only one available entrance. In 2019, arriving at the early hour of 7am still had us waiting six hours to enter. This year, an additional entry was added for staff which maybe cut the line down but not by as much as you would think. Though many Shambhala veterans have mastered the best times to try and enter, other first-timers this year mentioned wait times ranging from two to nine hours. Issues were credited to new software and being short-staffed.
That being said, although Shambhala was understaffed this year, they held it together incredibly well. The staff was very attentive, and even though medical crews were picking up extra shifts, every call was handled with care and alertness. I truly commend the Shambhala staff and volunteers for holding together what could have been a problematic disaster. The shortage was barely noticeable while being in attendance, and all in all, the event was handled smoothly.
From the incredible lasers at the Pagoda stage to the intense bass at the AMP stage, absolutely nothing was lackluster. Everywhere you turned, there was some sort of fascinating piece to look at or explore. For example, inside the festival grounds, there was a treasure hunt that I followed. We would stumble upon a box and a QR code next to it.
That QR code led to a personality quiz that ended with a riddle. The answer to the puzzle would unlock the box, which had little trinkets to take, and then the next riddle would lead you to the next box. Ultimately, the final box contained Shambhala merchandise! This treasure hunt was a great way for us to interact and meet other attendees also trying to figure out the riddle.
At each stage, there was an art exhibit walk-through that contained some of the most remarkable pieces of art I’ve ever seen. One notable piece interacted with an app on your phone, which, when held up to the painting, made it slightly 3-D and made the painting move and transform like a trippy scenic clip.
Shambhala is superb in creating areas around the event grounds and near stages that ideally offer places to sit or lay down and still enjoy the music and production. One of my favorite hangout spots was sitting in the bench areas out by the Grove stage and hanging by the beachside of the Salmo River, listening to the Living Room stage.
I made it my mission to try every single vendor at least once, and some of the standouts for me were the warm ricotta balls, a great snack at the end of the night when it was colder, and the cold salad wraps, perfect for the sweltering sunny day. One of the better parts of the food vendors here compared to other festivals is that the portion sizes are larger; therefore, you get more bang for your buck.
The only concern I had with the meal amenities was that the food was only sold within the festival grounds, which was a bit of a walk for attendees out in further camping areas. In the future, it would be nice to see more of a camper’s “lounge/vendor” area, where attendees could grab a coffee, food, or merchandise closer to the festival grounds.
While some don’t enjoy this rule, I find that it creates the best atmosphere. Being someone that attends many festivals which sell and allow alcohol, I’ve seen that it can create disruptive and sloppy attendees and, in some cases, dangerous; when people mix alcohol with other substances. Rarely did I see any attendees being rude or unable to function. It was so refreshing to have a high-spirited and loving crowd around at Shambhala instead of seeing people passed out everywhere.
It was so fun seeing the buzzing excitement pulsing every time someone mentioned the return of Shambhala after three years. Additionally, A Hundred Drums gave a standout performance on Thursday, flowing through a tantalizing groove of heavy, deep bass that entranced the crowd and connected to the heart of Shambhala.
Trapeze artists, flow artists, and an incredible vocalist came together to put on a 45-minute complete show unveiling the new, upgraded stage. The artists of Le Cirque de la Nuit gave one of the best performances I have seen, adding elements of fire, heights, swords, and heavy structural objects while performing to a custom score by Hollywood composer Zain Effendi. The unveil showed the replacement of the old geodesic structure with a new updated dojo-inspired stage design.
Having become renowned for his past performances at the festival, it made sense for Excision to christen the newly developed stage with a performance. He delivered one of the best classic sets I have seen from him in a while, reminiscent of his earlier years. The energy level from him and the crowd was unmatched as he cycled through multiple genres and had every single person jumping and dancing.
This included the spectacular visual array CloZee brought to the Pagoda while blessing us with a new unreleased track she had with Ganja White Night. The Sponges and Defunk brought funky vibes to the Fractal Forest, while the DNB Girls Takeover threw down in an epic three-hour showdown. Additionally, Deathpact unveiled on Sunday that the mysterious artist is actually two artists, leaving attendees with more questions than answers on who they could be.
This year, the Shambhala antics were a highlight for me. Some of these moments include seeing a sporadic, fun lightsaber fight ensue in the food market, volunteering to teach a silly water aerobics class in the river, and seeing random dance circles pop up with someone towing a prominent speaker around.
Starting from the first day of attendance, I befriended neighbors around my campsite and created friends I will continue to hold in my heart. A crew of Canadian Shambhala veterans welcomed us into their inner circle and were adamant about showing us around new artists and spending time including us in their ventures.
From hanging out on a giant ducky in the middle of the river to watching one of their friends, Metafloor, absolutely crush it with some deep, bass-heavy beats at the Cedar Lounge, complete with their own dancing pole and gumball machine, this crew truly embodies the spirit of Shambhala. We even participated in their group’s themed outfits created by their merchandise line Swerve Supply Co.
A notable moment for many attendees was the number of animals in attendance. I’m not talking about service animals; this one is aimed at the farm animals. Starting Friday night, the cows in a nearby fenced-off pen managed to escape and roam around the campground tents. Though the cows were harmless, animals such as wild turkeys and bears, which are known to be more aggressive, were also roaming the campgrounds.
As the ‘farmily’ expands, a few logistical items can be reviewed to improve future experiences. Water stations this year were few and far between, as many of them were rarely full over the weekend. Many attendees in the ShambaLodging had to go inside the festival grounds even to get water. Additionally, the water stations were not distinctively marked within the grounds, and for newcomers, they proved challenging to find, especially as the heat levels rose.
Shambhala has proven time and time again that it truly is a safe and loving place that brings in not just an array of exquisite music but also the community festivals first began with. If you haven’t been yet, I strongly recommend it; you won’t regret the experience and the friends you make.
Website | Facebook | Twitter | Instagram | SoundCloud | YouTube

source

Digital Audio Workstations (DAWs) Market with Tremendous growth by 2029 – Ableton Live, Acoustica, Adobe – openPR

Permanent link to this press release:

All 5 Releases

source

Free Massive X Presets: 700+ Big Sounds To Download For The Native Instruments Synth – Magnetic Magazine

Native Instruments
In 2019, Native Instruments released an entirely new iteration of its flagship Massive VST synthesizer. Massive X was more than a simple update or UI change to its original modeling. No, Massive X was an entirely new synth that quickly became another powerhouse player in the plugin world of VST synths for music production.
Need More Free Sounds? Check This Out. 
But music production can be damn expensive, especially if you are new to music production or aren't bringing in thousands of dollars from your productions. So we did the heavy lifting for you and collected every free preset and sound we could find for the synth.
By the end of this article, you'll have a massive new library of expressive sounds that allow you to get the most out of this powerful wavetable synth.
This pack of presets and sounds for Massive X has a little something for everyone but certainly a little something extra for bass-loving producers. Right off the bat, you can check that this massive pack of sounds is filled with bass sounds, leads, keys, atmospheres, and more. This is a killer pack to have, regardless of the genres of music you are producing.
Check Out More Analog Emulation Sounds Here <<<
This is one of the most extensive free Massive X preset packs online for the synth and is the perfect thing for your arsenal of sounds.
TL;DR? Save this pack and get creative with it right away.
Snag These Vicious Antelope's Presets (50 Sounds)
This freebie includes 12 presets for Chillwave / Future Bass Genres using Massive X.
The collection of sounds takes its inspiration from artists such as Odesza, Flume, and San Holo. All three producers have been producing some of the best electronic music recently, with more signature and laid-back sound pallets. The pack includes 12 presets that are perfect for any producer looking to make music in the style of these artists.
Snag These From Genera Studios Here
A random assortment of different single patches to download, this library won't make or break your library but are still worth checking out if you need a random pad, shimmering key, or programmed string pattern. But if you're looking for more premium string VSTs, check out our deep dive here.
Snag These From Preset Patch's Here 
This pack comprises 25 great atmospheres and effect presets that showcase what Massive X can be capable of. The presets are perfect for various genres, from ambient to dubstep. They'll help you add some extra depth and character to your productions. This pack is worth checking out if you're looking for some new Massive X sounds!
Check Out More High-Level Production Tutorials Here <<<
And while you're there, be sure to check out the wealth of information and knowledge the website offers for music producers. They have a collection of marketing tutorials, a podcast, and an entire blog with a bit of everything for you to play with and get involved in.
Note that if you want to download this pack, you must give the company your email address and receive promotional material from them.
Snag These From SupremeJa Here
This is a killer collection of very experimental sounds for the synthesizer. 20 presets have been taken from the premium pack and included in this demo that you can snag for free. These presets are designed to push the boundaries of what is possible with synthesis. As such, they may not always produce pleasant-sounding results. However, for those willing to experiment, Vulcan provides a unique and powerful tool for sound design.
Note that if you want to download this pack, you must give the company your email address and receive promotional material from them. I recommend checking out the full premium pack if you like this demo pack.
Snag These From Spektralisk Here
This free demo pack contains ten excellent presets from the True Trance Sounds Volume 12 pack. The presets are perfect for creating trance music, and they sound great. The collection is of great value, and it's worth checking out. Not that, because this is just the demo of the total premium package that you can buy, this just has a small taste of everything you could be getting. But included in that tiny little taste are some great pluck, soaring leads, and aggressive bass synths that showcase what you can do with the plugin.
To download, you must have a working email address. The video below is for the whole pack, not just the free demo version, but it will give you an idea of what to expect.
Snag These From NatLife Sounds Here
This is a decent-sounding collection of 10 presets containing plucks, lead, and bass sounds.
The Essential Massive X by Sonorous is a small but decent-sounding collection of 10 presets containing plucks, lead, and bass sounds. The presets add extra depth and dimension to your music, and the overall sound quality is quite good. The only downside is that there aren't many presets to choose from, so you may get bored with the sound after a while.
The MIDI patterns and drum samples in the pack are a great bonus. They provide a great way to get started with creating your music.
Snag These From Sonorous Here
French developer Expressive-e has released a free pack of 20 original presets for Massive X. The presets include pads, leads, and experimental soundscapes. These sounds are perfect for electronic music production and provide a great starting point for exploring the possibilities of Massive X.
To download the pack, you must provide a valid email address. This is so that we can send you the link to the collection and any further instructions.
Snag These From Sonorous Here
This one includes pads, leads, plucks, keys, and bass sounds, for use in all music genres. These are high-quality sounds that can be used in any genre of music to add some flavor or spice up a track.
His website has some cool free stuff to download, so it is worth checking out. The website includes various music production-related things, making it a great place to find new and exciting things to add to your collection.
Snag These From ANNMS Here
If you're looking for a new preset pack to help you make a smooth-sounding trap and hip-hop beats, AngelicVibes has got you covered. Their preset pack contains over 40 presets for bells, synths, pads, and more, so you can find the perfect sound for your track. Whether you're just getting started in production or are a seasoned pro, this pack is sure to have something for you. So check it out and see what AngelicVibes can do for your music today!
You will need to enter in an email address to access this one. This is to ensure that only those who are interested in the content can access it. This also allows for a way to contact you should there be any issues with the download.
Snag These From AngelicVibes Here
Loop Legendz's "Soul Survivor" consists of 20 mellow drill-rap or trap presets with pads, plucks, leads, and bass sounds. You also get a collection of 75 drum hits as well to help flesh out your productions. The presets are perfect for creating atmospheric and emotive tracks, and the drum kit adds a layer of versatility and groove.
Snag These From Loop Legendz Here
Presets can be imported into the User Presets folder by opening the preset file and clicking 'import.' A preset file can be opened from anywhere on the user interface. It will be saved to the User Presets folder and accessed in the User category in the Browser.
Here are the steps you need to follow to load one of these free preset files to the User Presets folder:
Managing Editor at Magnetic Magazine – Former Marketing Manager at the Hyperbits Masterclass – Writer, Content Strategist, Music Producer, and Record Label Manager 

source

In ‘Court Night Live’, A&E Finds Spiritual Successor To ‘Live PD’ – Deadline

By Peter White
Television Editor
A&E is heading to court, live.
The cable network has ordered Court Night Live, a reality series that will bring live trials to television.
The series comes from Big Fish Entertainment, the company behind controversial series Live PD. Although it will air on Wednesday nights at 9pm, starting August 10, rather than on Friday and Saturday nights, Court Night Live appears to be the network’s spiritual successor to live cops series.
Summer Premiere Dates For New & Returning Series On Broadcast, Cable & Streaming
Deadline revealed that Live PD, which was one of the highest rated series on cable, was canceled in June 2020, in the wake of George Floyd’s death and after a controversy that video allegedly captured by the Live PD crew of the death of Javier Ambler during a police stop had been destroyed.

'Live PD' Successor 'On Patrol: Live' Scores Strong Opening For Reelz Despite Technical Glitch

A Live PD successor On Patrol: Live recently premiered to strong numbers on Reelz.
Court Night Live will be hosted by Vinnie Politan, the lead anchor for Court TV, and Judge Greg Mathis, who hosts Judge Mathis, with analysis from retired Judge Vonda Evans. It will see civil cases from across the country litigated live from pop-up courtrooms in Philadelphia, Tampa, and Chicago in front of a gallery of community members.
During each broadcast, viewers will have the chance to vote on the verdicts in select cases in real time via text message. Politan, Mathis, and Evans will provide context and bring their legal perspectives to viewers so that they can better understand how the wheels of justice turn.
Court Night Live is produced by Big Fish Entertainment. Dan Cesareo, Lucilla D’Agostino and John Zito are executive producers for Big Fish, Elaine Frontain Bryant, Shelly Tatro, and Sean Gottlieb are executive producers for A&E.
“Court Night Live will combine the inherent drama of live civil court proceedings with context and expert legal analysis, elevating the traditional court shows that have been a staple of the television landscape for decades,” said Elaine Frontain Bryant, EVP and Head of Programming for A&E.  “Court Night Live gives viewers a chance to experience public trials live in the virtual courtroom gallery on air.”

Subscribe to Deadline Breaking News Alerts and keep your inbox happy.
Broadcast networks’ fall lineups and schedules
New and returning series on broadcast, cable and streaming
Series that made it or didn’t make it in 2021-22
Signup for Breaking News Alerts & Newsletters
Get our latest storiesin the feed of your favorite networks
We want to hear from you! Send us a tip using our annonymous form.
Sign up for our breaking news alerts
Deadline is a part of Penske Media Corporation. © 2022 Deadline Hollywood, LLC. All Rights Reserved.

source

Flemington Borough Master Planning Process, Rezoning for Downtown Business District Moving Forward in August – TAPinto.net

source

Blake Masters' views on guns, immigration, abortion, Social Security – The Arizona Republic

source

Record the road with this audio-enabled front and rear dashcam – Mashable

TL;DR: As of August 8, you can get the Blackbox Dash Cam and Rear Camera(opens in a new tab) for just $44.99 instead of $119.99 — that’s a 62% discount.
A lot of wild stuff can happen while you’re driving. If something goes wrong, you likely want as much evidence that you’re not at fault as you can get, or at least you may want a video to see exactly what happened. For that, a dash cam might be helpful. The Blackbox HD Dash Cam and Rear Camera is a wide-angle dash cam(opens in a new tab) with its own internal storage, and it may even help you park. This intuitive dash cam is on sale for a limited time for $44.99, normally sold for $119. 
There are myriad reasons to have a dash cam installed in your car, and they aren’t all to prove your innocence in case you’re involved in an accident. When someone drives by blasting a song you can’t quite put a finger on, the Blackbox’s built-in audio recording system may have captured it so you can go home and realize Maroon 5’s “One More Night” still hits.
And yes, in case of an accident, the seamless loop recording can capture a constant feed that’s only recorded over when all 32GB of local storage is full. This dash cam set can also help keep you informed about what’s going on behind your car. About 29% of car accidents are rear-end collisions. Even if you’re responsible with your rearview mirror, you can’t always see everything going on behind you. Stay informed with the included rearview camera(opens in a new tab) to cover your back-end blindspot. If something happens, it might be useful to prove it’s not your fault. Or, if you need a little assistance when you’re parking, you can use the built-in parking assist system, accessible through the four-inch multi-language display. 
Whether you’re trying to preempt any accidents or just get a better view of your parking situation, an HD view could be a huge help. For a limited time, save 62% on a Blackbox Dash Cam and Rear Camera(opens in a new tab), on sale for $44.99 (Reg. $119). 
Prices subject to change.
More in Cameras

source

MBE Aug. 8: 808 and celebrate, chill yer bones, get down with new MJ Nebreda – KCRW

The date is August eighth (8/8), so you know we’re celebrating the prolific 808 drum machine! This device transformed music production in the ‘80s, and today can be instantly recognized in everything from underground beats to mainstream hits. Click play immediately for the instrumental version of Snoop’s “Drop It Like It’s Hot,” and stick around to listen out for that very special kick drum sound throughout the show. Cool points await you for your efforts.
Lean into the unexpected with us via “Bone Marrow Stem Cell” from Berlin-based duo EASTER, comprised of writer Stix Omar and producer Maximilian Boss. Equal parts intriguing and terrifying. 
Plus, Miami based, Caracas born MJ Nebreda is back with dance floor ready, genre-blending Latin-infused sounds off of her recently released EP “Sin Pensar.” We’re excited about this young artist on the rise, who you may recognize from Ambar Lucid’s MBE visit last month. 
Ready to get this week officially started? You’ve come to the right place.

More from Morning Becomes Eclectic
Latest
Anne Litt shares her take on the week in KCRW music.

Featured
Get the latest from KCRW in your inbox 3x a week.

source

‹ Previous Next ›