Brett Luchesi brings Californian industry expertise to the home of Silver Star Spirits.
by Kelsey Shoemaker
August 5, 2022
3:15 PM
Crystal Wise
Silver Star Spirits is under the helm of its new master distiller, Brett Luchesi, who made the trek from California to the Lone Star State to take part in Trinity River Distillery’s new vision.
Just two months shy of being the newbie in the area, Brett is laying down the foundation for Trinity River Distillery to be bigger, better, and stronger than before. With 11 years in the industry, Brett hopes to bring his award-winning success from San Diego to Cowtown.
“I’m always one to ask people how they do things and take in any knowledge that I can,” Brett says. “I’m open with my style and I want everyone around me to know as much as I know and I want them to teach me things. The beer industry in San Diego was so tight that if you needed something, you could ask another distillery or brewery. That is something I want to bring to Fort Worth. We all work together because that’s how we build this industry in this area and make connections.”
In San Diego, he climbed the proverbial distillery ladder, moving from the bottling line to becoming head distiller at Ballast Point Brewing and Spirits. In his five-year stint, he managed to expand the five products in the SKU to 18. One of his successes: Starting when there were 20 employees and leaving with 700 people working at the brewery. Ballast Point raised brows nationally and internationally with its spirits. One main focus being on them was being guinea pigs for canned cocktails before everyone else caught on to the flashy trend.
Brett Luchesi
“I would never say I’m a master distiller because that shows I know everything and I’ll never admit I know everything,” Brett shares. “The innovation aspect of distilling is something I always look at to improve efficiency, products, and new avenues of flavors we can incorporate.”
The sudden change of scenery was due to his family wanting to mix things up and after some research and digging, Fort Worth was a solid new venture. Brett and Thomas Ingham (also recently acquired in April 2022 as the distillery’s new president and chief executive officer) shared the vision of bringing the community together and expanding the vision of Trinity River Distillery.
“We are very excited to welcome Brett to the Trinity River Distillery family,” Thomas Ingham states in a press release. “Brett is a creative thinker that brings a wealth of knowledge as a former brewer with Ballast Point Brewing Company, as well as Lead and Head Distiller with craft distilleries in the Southwest and West coast. He understands how to combine artistry and process to make a great product.”
by Kelsey Shoemaker
August 5, 2022
3:15 PM
© FWTX.COM All rights reserved. Panther-City Media Group
New Master Distiller at Trinity River Distillery Raises the Bar – Fort Worth Magazine
Full Description of AEW's 'All Elite Women' Trademark – 411mania.com
AEW filed an application last week for the phrase “All Elite Women,” and a new report has the full description of good and services applied for. As noted last week, AEW filed for the application on August 1 for multiple goods & services including live-action content (aka TV series), retail services and more. PWINsider reports that the full description also lists a host of merchandise, video games, digital media, and documentaries.
It was reported in the WON last week that the name could be used for a new reality series, which is speculated to be about AEW’s couples, with an announcement likely set to be made soon.
The full goods and services description reads:
-Cinematographic films featuring sports, entertainment and subjects of general human interest; Video game discs; Digital media, namely, pre-recorded DVDs, downloadable audio and video recordings, and CDs featuring sports, entertainment and subjects of general human interest; Downloadable video game software; Pre-recorded DVDs featuring sports, entertainment and subjects of general human interest; Recorded video game software
-Decals; Pencils; Pens; Stickers; Cardboard packaging; Cardboard containers for packaging; Labels of paper; Photograph albums; Printed books in the field of sports and entertainment; Printed brochures about sports and entertainment; Printed greeting cards; Printed magazines in the field of sports and entertainment; Printed photographs; Printed postcards; Printed posters; Printed souvenir programs concerning sports and entertainment; Scribble pads; Collectable printed trading cards; Printed calendars; Printed comic books; Printed notepads; Printed picture books; Printed sports trading cards
-Backpacks; Handbags; Wallets; All-purpose carrying bags; Athletic bags; Book bags; Carry-on bags; Duffel bags; Fanny packs; Gym bags; School bags; Tote bags; Travel bags
-Beverageware; Cups; Mugs; Drinking glasses; Lunch boxes; Sports bottles sold empty
-Bandanas; Footwear; Gloves; Headwear; Pajamas; Pants; Pullovers; Raincoats; Shirts; Shorts; Socks; Sweaters; Sweatpants; Sweatshirts; Undershirts; Underwear; Athletic apparel, namely, shirts, pants, jackets, footwear, hats and caps, athletic uniforms; Jogging suits; Leather belts for clothing; Tank tops; Wrist bands as clothing; Clothing belts; Clothing for wear in wrestling games; Dress shirts; Halloween costumes; Masquerade costumes; Outer jackets; Polo shirts; Sports shirts; T-shirts
-Dolls; Skateboards; Action figures and accessories therefor; Board games; Card games; Costume masks; Playing cards; Stuffed toy animals; Tabletop games; Video game machines; Video game machines for use with televisions; Bobblehead dolls; Cases for action figures; Hand-held units for playing electronic games; Toy action figures; Toy wrestling rings
-Retail store services featuring a wide variety of sports and entertainment merchandise; Advertising and promotional services; On-line retail store services featuring a wide variety of sports and entertainment merchandise; Organizing exhibitions for wrestling events; Promotional sponsorship of professional wrestling events
-Streaming of pay-per-view events material on the Internet; Streaming of audio material on the Internet; Streaming of video material on the Internet; Transmission of information in the audiovisual field; Video-on-demand transmission services via the Internet; Communications services, namely, transmitting streamed sound and audiovisual recordings via the Internet; Mobile media services in the nature of electronic transmission of entertainment media content
-Entertainment services in the nature of creation, development, and production of television programming; Entertainment services in the nature of professional athletes competing in wrestling; Fan clubs; Music production services; On-line journals, namely, blogs featuring sports and entertainment; Publishing of electronic publications; Television show production; Educational and entertainment services, namely, a continuing program about wrestling accessible by radio, television, satellite, audio, video and computer networks; Entertainment in the nature of live performances by professional wrestlers; Entertainment in the nature of wrestling contests; Entertainment services, namely, wrestling exhibits and performances by a professional wrestler and entertainer; Entertainment services, namely, providing temporary use of non-downloadable video games; Entertainment, namely, a continuing wrestling show broadcast over television, satellite, audio, and video media; Providing entertainment news and information specifically in the field of sport and entertainment via a website; Providing online music, not downloadable; Providing wrestling news and information via a global computer network; Providing a website featuring non-downloadable publications in the nature of electronic books, magazines, newsletters, journals, periodicals, articles, brochures, and on-line journals in the field of sports and entertainment; Providing an Internet website portal in the field of entertainment, cultural and sporting events
AEW, All Elite Women, Jeremy Thomas
Copyright © 2022 411mania.com, LLC. All rights reserved.
Click here for our privacy policy. Please help us serve you better, fill out our survey.
Use of this site signifies your agreement to our terms of use.
Strange, never-before-seen diamond crystal structure found inside 'Diablo canyon' meteorite – Livescience.com
Live Science is supported by its audience. When you purchase through links on our site, we may earn an affiliate commission. Here’s why you can trust us.
By published
Scientists found something unexpected inside a meteorite that hit Earth 50,000 years ago.
While studying diamonds inside an ancient meteorite, scientists have found a strange, interwoven microscopic structure that has never been seen before.
The structure, an interlocking form of graphite and diamond, has unique properties that could one day be used to develop superfast charging or new types of electronics, researchers say.
The diamond structures were locked inside the Canyon Diablo meteorite, which slammed into Earth 50,000 years ago and was first discovered in Arizona in 1891. The diamonds in this meteorite aren’t the kind most people are familiar with. Most known diamonds were formed around 90 miles (150 kilometers) beneath Earth’s surface, where temperatures rise to more than 2,000 degrees Fahrenheit (1,093 degrees Celsius). The carbon atoms within these diamonds are arranged in cubic shapes.
By contrast, the diamonds inside the Canyon Diablo meteorite are known as lonsdaleite — named after British crystallographer Dame Kathleen Lonsdale, University College London’s first female professor — and have a hexagonal crystal structure. These diamonds form only under extremely high pressures and temperatures. Although scientists have successfully made lonsdaleite in a lab — using gunpowder and compressed air to propel graphite disks 15,000 mph (24,100 km/h) at a wall — lonsdaleite is otherwise formed only when asteroids strike Earth at enormously high speeds.
Related: Diamond hauled from deep inside Earth holds never-before-seen mineral
While studying lonsdaleite in the meteorite, the researchers found something odd. Instead of the pure hexagonal structures they were expecting, the researchers found growths of another carbon-based material called graphene interlocking with the diamond. These growths are known as diaphites (opens in new tab), and inside the meteorite, they form in a particularly intriguing layered pattern. In between these layers are “stacking faults,” which mean the layers don’t line up perfectly, the researchers said in a statement (opens in new tab).
Finding diaphites in the meteoritic lonsdaleite suggests that this material can be found in other carbonaceous material, the scientists wrote in the study, which means it could be readily available to use as a resource. The finding also gives the researchers a better sense of the pressures and temperatures needed to create the structure.
—Never-before-seen crystals found in perfectly preserved meteorite dust
—Massive meteorite impact created the hottest mantle rock ever
—These meteorites contain all of the building blocks of DNA
Graphene is made of a one-atom-thick sheet of carbon, arranged in hexagons. Although research on this material is still ongoing, the material has many potential applications. Because it is both as light as a feather and as strong as a diamond; both transparent and highly conductive; and 1 million times thinner than a human hair (opens in new tab), it could one day be used for more targeted medicines, tinier electronics with lighting-fast charging speeds, or faster and bendier technology, the researchers said.
And now that researchers have discovered these graphene growths inside meteorites, it’s possible to learn more about how they form — and thus how to make them in the lab.
“Through the controlled layer growth of structures, it should be possible to design materials that are both ultra-hard and also ductile, as well as have adjustable electronic properties from a conductor to an insulator,” Christoph Salzmann, a chemist at University College London and co-author of a paper describing the research, said in the statement (opens in new tab).
The strange new structures were described July 22 in the journal Proceedings of the National Academy of Sciences (opens in new tab).
Originally published on Live Science.
JoAnna Wendel is a freelance science writer living in Portland, Oregon. She mainly covers Earth and planetary science but also loves the ocean, invertebrates, lichen and moss. JoAnna’s work has appeared in Eos, Smithsonian Magazine, Knowable Magazine, Popular Science and more. JoAnna is also a science cartoonist and has published comics with Gizmodo, NASA, Science News for Students and more. She graduated from the University of Oregon with a degree in general sciences because she couldn’t decide on her favorite area of science. In her spare time, JoAnna likes to hike, read, paint, do crossword puzzles and hang out with her cat, Pancake.
Stay up to date on the latest science news by signing up for our Essentials newsletter.
Thank you for signing up to Live Science. You will receive a verification email shortly.
There was a problem. Please refresh the page and try again.
Live Science is part of Future US Inc, an international media group and leading digital publisher. Visit our corporate site (opens in new tab).
© Future US, Inc. Full 7th Floor, 130 West 42nd Street, New York, NY 10036.
Steam Phunk and Idun Nicoline release a wonderful dance single, entitled, “Hell & High Water” – Bong Mines Entertainment
Steam Phunk is a DJ and producer act consisting of Alexander and Sebastian, two brothers from Hamburg, Germany. Idun Nicoline is a singer-songwriter from Oslo, Norway. Not too long ago, they released a wonderful dance single, entitled, “Hell & High Water.”
“Bring hell and higher water, I’m gonna leave no matter what you say. ‘Cause you said you wouldn’t call her but you went ahead and did it anyway. Not gonna change my mind, we’ve run out of time. Oh, this is goodbye, not gonna change my mind.” – lyrics
‘Hell & High Water’ tells a heartfelt tale about a woman who decides to leave her significant other high and dry. Apparently, their once budding relationship has turned toxic and there’s no going back to what they used to be. Later, she tells her partner the reason why she’s leaving, “Our conversations turn to fighting ‘cause all you ever think about is her.”
‘Hell & Water’ contains a breakup narrative, catchy vocals, and danceable drops that will resonate well with fans of Jonas Blue, Gryffin, and Nora Van Elken. The dance floor-friendly tune possesses thudding drum-laden instrumentation flavored with EDM, deep house, and electro-dance elements. Furthermore, “Hell & Water” invites listeners to dance at a beach party or simply relax by a pool.
‘Hell & High Water’ is about being so done with someone that it doesn’t matter what they say or do to make amends – hence the lyrics bring ‘Hell & High Water.’ We think a lot of people have a hard time getting out of toxic relationships. That’s why we wanted to write an anthem that people can sing along with when they decide to stop putting up with people’s bad behavior.” – Steam Phunk explained
Steam Phunk’s sound is based on melodic beats crossed with deep house elements. In childhood, the two brothers discovered that instruments produce more than just melodies, but also offer the possibility to write songs and tell stories. Since then, they have been making music together. So far, they have performed on the main stage at Freshtival, collaborated with various artists around the world, and heard on radio stations and official Spotify playlists in several countries. Also, Steam Phunk has received support from R3HAB, Tiesto, and Oliver Heldens.
Idun Nicoline discovered her passion and interest for writing music and singing at an early age. At 19, she moved to Boston to attend Berklee College of Music, where she discovered her passion for production and recording. In 2014, Idun attended Berklee’s five-week summer program and was granted a 50% scholarship to attend the college full time. She graduated from Berklee with a degree in Music Production and Engineering in 2020.
Being a student at Berklee has given Idun a lot of opportunities including producing a lot of artists, releasing two singles, and the opportunity to record with the Grammy Award-winning recording engineer, George Massenburg, and producer, Kevin Killen. So far, Idun has opened for artists such as AURORA and Julie Bergan. A few of her musical influences include LEON, Sigrid, Chelsea Cutler, Julia Michaels, and Astrid S.
We recommend adding Steam Phunk’s and Idun Nicoline’s “Hell & High Water” single to your favorite dance playlist. Also, let us know how you feel in the comment section below. Mel Blanc’s famous catchphrase, That’s All Folks! Thanks for reading another great article on Bong Mines Entertainment – the hot spot for new music. Always remember that (P) Positive, (E) Energy, (A) Always, (C) Creates, (E) Elevation (P.E.A.C.E). Contact us on social media via Twitter, YouTube, Instagram, or Facebook, and let us know what’s going on. “Disclaimer: This post contains Apple TV and Apple Music affiliate links. We may earn an affiliate commission when you buy through links on our site.
Idun NicolineSteam Phunk
Your email address will not be published.
Forgotten Password
Music Publishing Administration Software Market Size, Scope, Growth Opportunities, Trends by Manufacturers And Forecast to 2029 – Shanghaiist – Shanghaiist
New Jersey, United States – Music Publishing Administration Software Market report performs thorough market observation to identify market potential statistics to make an informative decision for the business. Potential customers and their demands are studied in the market analysis to guide industry owners to launch the right products into the market and generate larger revenues. It works as an effective means to forecast market growth and overall sales growth. Market drivers presented in this market report are leading factors for business growth. A useful framework is provided in this market report to predict market and industry attractiveness. Such framework refers to Porter’s five forces analysis spots out five factors, which enhance the market growth.
Music Publishing Administration Software market research is one of the efficient ways of testing out ideas before bringing them to market. It assures business owners to obtain huge success in the business by providing them with important market data and allowing them to launch products or services successfully. In order to become successful in the cut-throat competition, key organizations have to project their reaction to the change for staying relevant. By getting all the details regarding increasing consumer requirements and competitors’ reactions, business owners can secure relevancy as well as longevity in the market. This Music Publishing Administration Software market report enables key players to change, stay successful and be innovative with the times. It provides you with detailed understanding of the foundation of the industry that refers to competitors and customers.
Get Full PDF Sample Copy of Report: (Including Full TOC, List of Tables & Figures, Chart) @ https://www.verifiedmarketresearch.com/download-sample/?rid=80466
Key Players Mentioned in the Music Publishing Administration Software Market Research Report:
Songtrust, matijakolaric.com, Songspace, Vistex ROBA Music Publishing, TuneRegistry, LLC, Synchtank, Reprtoir, YourTempo.com, Golba Music
Music Publishing Administration Software Market Segmentation:
Music Publishing Administration Software Market By Type
• Cloud-Based
• On-Premise
Music Publishing Administration Software Market By Application
• Large Enterprises and Small
• Medium-sized Enterprises (SMEs)
This Music Publishing Administration Software market report assists a number of investors, shareholders as well as enterprises in understanding the tough areas of marketing ideas, technical development, key issues, and systematic analysis in order to accomplish long-term competitive gain in the industry. It goes on to talk about basic market facets along with market drivers, restraints, existing problems, forthcoming opportunities, and forecasts. This Music Publishing Administration Software market survey depicts a few exact customer insights in order to build technology strategies to make investment useful. It makes use of both primary and secondary methods to offer wide-ranging industry data to help out you in making business choices and introducing new items to the market.
Inquire for a Discount on this Premium Report @ https://www.verifiedmarketresearch.com/ask-for-discount/?rid=80466
For Prepare TOC Our Analyst deep Researched the Following Things:
Report Overview: It includes major players of the Music Publishing Administration Software market covered in the research study, research scope, market segments by type, market segments by application, years considered for the research study, and objectives of the report.
Global Growth Trends: This section focuses on industry trends where market drivers and top market trends are shed light upon. It also provides growth rates of key producers operating in the Music Publishing Administration Software market. Furthermore, it offers production and capacity analysis where marketing pricing trends, capacity, production, and production value of the Music Publishing Administration Software market are discussed.
Market Share by Manufacturers: Here, the report provides details about revenue by manufacturers, production and capacity by manufacturers, price by manufacturers, expansion plans, mergers and acquisitions, and products, market entry dates, distribution, and market areas of key manufacturers.
Market Size by Type: This section concentrates on product type segments where production value market share, price, and production market share by product type are discussed.
Market Size by Application: Besides an overview of the Music Publishing Administration Software market by application, it gives a study on the consumption in the Music Publishing Administration Software market by application.
Production by Region: Here, the production value growth rate, production growth rate, import and export, and key players of each regional market are provided.
Consumption by Region: This section provides information on the consumption in each regional market studied in the report. The consumption is discussed on the basis of country, application, and product type.
Company Profiles: Almost all leading players of the Music Publishing Administration Software market are profiled in this section. The analysts have provided information about their recent developments in the Music Publishing Administration Software market, products, revenue, production, business, and company.
Market Forecast by Production: The production and production value forecasts included in this section are for the Music Publishing Administration Software market as well as for key regional markets.
Market Forecast by Consumption: The consumption and consumption value forecasts included in this section are for the Music Publishing Administration Software market as well as for key regional markets.
Value Chain and Sales Analysis: It deeply analyzes customers, distributors, sales channels, and value chain of the Music Publishing Administration Software market.
Key Findings: This section gives a quick look at the important findings of the research study.
For More Information or Query or Customization Before Buying, Visit @ https://www.verifiedmarketresearch.com/product/music-publishing-administration-software-market/
About Us: Verified Market Research®
Verified Market Research® is a leading Global Research and Consulting firm that has been providing advanced analytical research solutions, custom consulting and in-depth data analysis for 10+ years to individuals and companies alike that are looking for accurate, reliable and up to date research data and technical consulting. We offer insights into strategic and growth analyses, Data necessary to achieve corporate goals and help make critical revenue decisions.
Our research studies help our clients make superior data-driven decisions, understand market forecast, capitalize on future opportunities and optimize efficiency by working as their partner to deliver accurate and valuable information. The industries we cover span over a large spectrum including Technology, Chemicals, Manufacturing, Energy, Food and Beverages, Automotive, Robotics, Packaging, Construction, Mining & Gas. Etc.
We, at Verified Market Research, assist in understanding holistic market indicating factors and most current and future market trends. Our analysts, with their high expertise in data gathering and governance, utilize industry techniques to collate and examine data at all stages. They are trained to combine modern data collection techniques, superior research methodology, subject expertise and years of collective experience to produce informative and accurate research.
Having serviced over 5000+ clients, we have provided reliable market research services to more than 100 Global Fortune 500 companies such as Amazon, Dell, IBM, Shell, Exxon Mobil, General Electric, Siemens, Microsoft, Sony and Hitachi. We have co-consulted with some of the world’s leading consulting firms like McKinsey & Company, Boston Consulting Group, Bain and Company for custom research and consulting projects for businesses worldwide.
Contact us:
Mr. Edwyne Fernandes
Verified Market Research®
US: +1 (650)-781-4080
UK: +44 (753)-715-0008
APAC: +61 (488)-85-9400
US Toll-Free: +1 (800)-782-1768
Email: [email protected]
Website:- https://www.verifiedmarketresearch.com/
FL Studio Mobile Review: DAW On Your ‘Droid – Android Police
I Want It AllWhen I saw that Fruityloops Studio had been released for Android, I don’t mind admitting I was pretty excited. I love my phone and I
When I saw that Fruityloops Studio had been released for Android, I don’t mind admitting I was pretty excited. I love my phone and I love my tablet, but I often find myself wishing I could do something more productive with them. The tablet I use is the Acer Iconia A700 and, judging by the specs, this slate should be more than capable of empowering me to actually create some kind of content instead of simply facilitating content consumption. I’ve spent more than my fair share of hours working with Reason, Cubase, and Cakewalk on my PC, so the idea of high quality music production on a tablet was instantly attractive.
For those unfamiliar with Fruityloops, or digital audio creation at all, FL Studio is a Digital Audio Workstation which allows you to create music using a combination of different instruments and drum machines. You can ‘play’ directly onto a virtual piano keyboard or enter your composition step by step in a sequencer, where a colored bar of your chosen length will play a note depending on where you place it. You can alter the volume of each instrument and each note, and apply reverb, delay, EQ, overdrive and filter effects. The finished masterpiece can be exported as a wav or m4a file, or even a midi file, ready to be imported to your computer.
FL Studio is beautifully presented. From the first time you fire it up, it’s obvious that the developers have spent a lot of time making sure that this app really looks the part. There’s a mild iOS flavor to the design, but to be honest I think this is largely to do with the fact that, like it or not, iOS development informs a lot of what we see on other platforms.
FL Studio uses a semi-real style where appropriate – the effects area is all modeled on real-world analogue counterparts – and a straightforward, icon-driven approach to the actual music creation areas. The layout is clean and the use of popup dialogs allows access to all the settings and options you could want without ever looking cluttered.
I found the UI somewhat idiosyncratic to begin with, and I suspect that first time composers might need to set aside a good hour of use before becoming comfortable with it.
As an example, there is a ‘Swing’ control, which allows the budding musician to add a slight lilt to drum tracks. At one point, I changed this to see what effect it would have. I should have paid more attention to what I was doing, as it took me about ten minutes to find that control again – squirreled away on a screen which appears when you change the sound of one of the drum tracks. I had to edit a drum part, click on one of the instrument names and there it sat. Easy enough when you know where it’s hiding, but damned elusive while you’re looking on the main screen, the instruments screen, the effects panels and anywhere else it might logically be.
This was not the only time I found myself somewhat at odds with the workflow and certain parts really seemed counter-intuitive. Pressing the edit button in step sequencer mode will give you a new note to play with, but it doesn’t actually remain on your score until you hit the ‘Draw’ button which not only sticks that note but also provides you with a new one. If you hit ‘Done’ before ‘Draw’ your note is lost forever. However, having played with the sequencer for a weekend, I realized that I was very quickly doing exactly what I wanted, without having to think about it anymore. So, a learning curve is present, and you should expect it, but you should also trust that the developers have actually created a very useable canvas for music creation.
There is one specific choice that the devs made which I wish could be made mandatory in all similar cases. Many values can be adjusted using a button on either side of a counter, showing the number you are changing. If you keep the button pressed down, the value continues to change in that direction, ramping up in speed the longer you press it. We’ve all seen this behavior on our computer software, but for some reason it is often missing in the mobile world. I was genuinely delighted to see this touch included, and it shows that the Fruityloops programmers are in tune with their audience (pun intended!).
FL Studio presents the user with what seems like a great range of sounds to play with. There are eleven drum collections and six sound effects packs, which are designed to be used via the drum machine. A total of fifty synthesizer voices are at your disposal, separated into lead, bass, pad and keys categories. On top of that, you have twenty four instruments (orchestra, guitar, bass, percussion and keyboard) and a bevy of Reflex-like loops. The quality of each sound is just as you would wish – clean, well defined and totally free of digital ‘noise’.
The downside is that, as it stands, FL Studio will not let you tinker with the existing sounds nor import new ones. As a comparison, Caustic 2 not only allows you to tweak the synths to your hearts content, it will also support importing of new soundsets to its sampler. ‘So what?’ you may say, ‘FL Studio gives you plenty to play with.’ The problem is that no matter which kind of music you are interested in making, you will very quickly reach the limit of the included sounds. Ok, if you only want to create piano concertos, you’ll be fine. Beyond that, the limited palette is…..well, limiting. I ran into this problem extremely quickly.
Over the two days I spent with FL, I made two tracks – a version of the electro pop classic ‘Cars’ and a David Arnold-esque bit of loungey score.
For ‘Cars’, FL provided most of what I wanted. Once the main parts were in place, however, I felt the need for a nice atmospheric pad or two, just to give a little background. Digging through the list of sounds, I could find nothing by way of usable, semi-ambient pads. The closest I could get were some electronic bloops of the kind found on the old DX7 – very 80’s (and not in a good way) and not at all what I was looking for.
The Oceans 11 pastiche was where FL really hit the rocks. Only two sounds form the horn section, neither of which were what I was aiming for, both of which standing out as ‘the wrong sound’. If only I were able to load up more sounds, I could easily forgive this in the hope that something will come along to fill the gap – or, even better, I could create my own instrument and share it with others. Currently though, this is not possible.
It’s also not possible to record audio as any part of your piece, or even to import pre-recorded tracks. You can paint with the colors that FL Studio provides, but nothing more.
Ok, so that’s a fairly serious limitation (and there’s another one, albeit less serious, to follow) but I would be remiss if I did not point out the areas where FL Studio excels – and these really do lift this app above the other options out there.
First of all: the lag and stutter which so many other DAW apps suffer from. There was almost none. Bear in mind, this is on an Acer A700 which, despite the quad core processor, can often falter with more heavyweight apps. FL was able to play the current song, switch between different screens, and even save the track without interrupting the playback. Very occasionally it would glitch, such as when loading a new sound into an existing sequencer track, but on the whole this app impressed me as capable and robust.
Similarly, when entering music via the keyboard interface, it proved very accurate and placed the notes pretty much exactly where I had intended them – without using the available quantize feature. Bear in mind that this can be a problem with a hardware keyboard and a midi-capable PC and you realize that the devs really have produced a very polished product. Suddenly, using a touch screen to create music is not just a fanciful idea – you can actually do it.
As stated before, the interface took a little getting used to but once I had become accustomed, editing tracks was an absolute breeze. Quickly shifting between moving notes, placing new ones, copying patterns and altering the length of the tones became second nature and I would have to admit that this may well be ‘the fastest way from your brain to the speakers’. Even the final mix is relatively easy, given that you can quickly access the volume and pan control of each instrument from the first of the whole-score views.
Working on the final mix is when you are likely to encounter the last shortcoming of FL Studio. While the effects themselves are actually well implemented, the scope with which you can apply them is not quite on the same level. Short version: you cannot apply a given effect to specific tracks in your piece. You can apply the effect to the whole mix, or apply it only to those tracks which have been flagged for processing. This means that if you want delay on the drums, but reverb on the piano, you are simply out of luck. You can have both effects on both tracks, or one effect on one of them. Again, for the first time user, this may not be such an issue but over a little time you will quickly come to wish for a greater flexibility.
I really wanted Fruityloops Studio to be amazing, and it’s so close, it’s almost painful. If you’re mainly interested in creating synth-based tracks on your slate, you’ll be playing with this app for a good while. If you tend towards more organic sounds, you may well find that FL Studio falls too far short. You can, however, rely on it for quickly putting down ideas as they come to you, and there is a lot to be said for that. A touch under twenty dollars is quite a considerable investment, but this is a high quality app in every respect, and if you are determined to use your device to make music, this is arguably your best option.
What it does, it does incredibly well, and it’s certainly the most professional DAW app available at the moment. It’s possible that future releases will allow you to import new sounds (even if you have to buy them) or even add some recorded audio, though I don’t know if this is actually planned. Sadly, I suspect that the effects utilization will remain as it is, which is a great shame. Although it may lack the high quality polish of FL Studio, Caustic 2 overcomes both of these shortcomings so it is clearly possible. If I had to choose between the two though, it would be a hard call to make. Despite my initial encounters, I think the ease of editing really sets Fruityloops apart and this would be the reason I’d stick with it.
FL Studio does have limitations but this is still a remarkably polished product and currently the smoothest method for creating music on Android. First time music makers will have a blast with it, while old hands will accept the drawbacks, and make the most of everything else. If you’re in the market for a digital musical notepad, FL Studio may be just what you’re looking for.
Tucked in down here are the two tracks I made over the weekend, to give you an idea of the sound quality available from FL Studio:
Very simple Oceans 11 style riff
https://www.androidpolice.com/wp-content/uploads/2013/04/nexusae0_oceanesque.mp3
Version of Cars by Gary Numan
https://www.androidpolice.com/wp-content/uploads/2013/04/nexusae0_cars.mp3
Free Music Making Software Market Size, Scope, Growth Opportunities, Trends by Manufacturers And Forecast to 2029 – Shanghaiist – Shanghaiist
New Jersey, United States – Free Music Making Software Market research report plays an important role in running a successful business as it covers vital market-related data. It is easy to take strategic decisions and allows for tracking of future business growth. It serves an efficient medium to reach target consumers and obtain important insights into their opinions, values, and preferences. It becomes easy to deliver fast results in the business by getting all the key details regarding market growth factors. All the primary data and important market research tools are used by market analysts to form this effective market report.
This Free Music Making Software market report conducts a systematic examination of the market in order to give deep perceptions, evaluate market status, make significant improvements, and follow the previous financial performance. Several enterprises were forced to close as a result of the COVID-19 outbreak. This Free Music Making Software market study report contains a wealth of information on market changes, business-enhancing variables, trends, and emerging markets, as well as statistics on upcoming events and promotional activities. This market research study’s main role is to forecast if a product will gain profit in the market. Market participants benefit greatly from such forecasting since they may introduce or authorize new items into the market to expand their business.
Get Full PDF Sample Copy of Report: (Including Full TOC, List of Tables & Figures, Chart) @ https://www.verifiedmarketresearch.com/download-sample/?rid=54893
Key Players Mentioned in the Free Music Making Software Market Research Report:
Ableton, Adobe, Avid, Apple, MAGIX
Free Music Making Software Market Segmentation:
Free Music Making Software Market, By Type
• Editing
• Mixing
• Recording
Free Music Making Software Market, By Application
• Professional users
• Casual Users
This Free Music Making Software market report assists a number of investors, shareholders as well as enterprises in understanding the tough areas of marketing ideas, technical development, key issues, and systematic analysis in order to accomplish long-term competitive gain in the industry. It goes on to talk about basic market facets along with market drivers, restraints, existing problems, forthcoming opportunities, and forecasts. This Free Music Making Software market survey depicts a few exact customer insights in order to build technology strategies to make investment useful. It makes use of both primary and secondary methods to offer wide-ranging industry data to help out you in making business choices and introducing new items to the market.
Inquire for a Discount on this Premium Report @ https://www.verifiedmarketresearch.com/ask-for-discount/?rid=54893
For Prepare TOC Our Analyst deep Researched the Following Things:
Report Overview: It includes major players of the Free Music Making Software market covered in the research study, research scope, market segments by type, market segments by application, years considered for the research study, and objectives of the report.
Global Growth Trends: This section focuses on industry trends where market drivers and top market trends are shed light upon. It also provides growth rates of key producers operating in the Free Music Making Software market. Furthermore, it offers production and capacity analysis where marketing pricing trends, capacity, production, and production value of the Free Music Making Software market are discussed.
Market Share by Manufacturers: Here, the report provides details about revenue by manufacturers, production and capacity by manufacturers, price by manufacturers, expansion plans, mergers and acquisitions, and products, market entry dates, distribution, and market areas of key manufacturers.
Market Size by Type: This section concentrates on product type segments where production value market share, price, and production market share by product type are discussed.
Market Size by Application: Besides an overview of the Free Music Making Software market by application, it gives a study on the consumption in the Free Music Making Software market by application.
Production by Region: Here, the production value growth rate, production growth rate, import and export, and key players of each regional market are provided.
Consumption by Region: This section provides information on the consumption in each regional market studied in the report. The consumption is discussed on the basis of country, application, and product type.
Company Profiles: Almost all leading players of the Free Music Making Software market are profiled in this section. The analysts have provided information about their recent developments in the Free Music Making Software market, products, revenue, production, business, and company.
Market Forecast by Production: The production and production value forecasts included in this section are for the Free Music Making Software market as well as for key regional markets.
Market Forecast by Consumption: The consumption and consumption value forecasts included in this section are for the Free Music Making Software market as well as for key regional markets.
Value Chain and Sales Analysis: It deeply analyzes customers, distributors, sales channels, and value chain of the Free Music Making Software market.
Key Findings: This section gives a quick look at the important findings of the research study.
For More Information or Query or Customization Before Buying, Visit @ https://www.verifiedmarketresearch.com/product/free-music-making-software-market/
About Us: Verified Market Research®
Verified Market Research® is a leading Global Research and Consulting firm that has been providing advanced analytical research solutions, custom consulting and in-depth data analysis for 10+ years to individuals and companies alike that are looking for accurate, reliable and up to date research data and technical consulting. We offer insights into strategic and growth analyses, Data necessary to achieve corporate goals and help make critical revenue decisions.
Our research studies help our clients make superior data-driven decisions, understand market forecast, capitalize on future opportunities and optimize efficiency by working as their partner to deliver accurate and valuable information. The industries we cover span over a large spectrum including Technology, Chemicals, Manufacturing, Energy, Food and Beverages, Automotive, Robotics, Packaging, Construction, Mining & Gas. Etc.
We, at Verified Market Research, assist in understanding holistic market indicating factors and most current and future market trends. Our analysts, with their high expertise in data gathering and governance, utilize industry techniques to collate and examine data at all stages. They are trained to combine modern data collection techniques, superior research methodology, subject expertise and years of collective experience to produce informative and accurate research.
Having serviced over 5000+ clients, we have provided reliable market research services to more than 100 Global Fortune 500 companies such as Amazon, Dell, IBM, Shell, Exxon Mobil, General Electric, Siemens, Microsoft, Sony and Hitachi. We have co-consulted with some of the world’s leading consulting firms like McKinsey & Company, Boston Consulting Group, Bain and Company for custom research and consulting projects for businesses worldwide.
Contact us:
Mr. Edwyne Fernandes
Verified Market Research®
US: +1 (650)-781-4080
UK: +44 (753)-715-0008
APAC: +61 (488)-85-9400
US Toll-Free: +1 (800)-782-1768
Email: [email protected]
Website:- https://www.verifiedmarketresearch.com/
Gloves off: Crist, Fried battle for governor gets meaner as Democratic primary election looms – Florida Phoenix
U.S. Rep Charlie Crist and Agriculture Commissioner Nikki Fried unleash attack ads ahead of the upcoming Democratic primaries for the 2022 gubernatorial election. Credit: Nikki Fried for Governor campaign, Charlie Crist for Governor campaign.
With the primaries just over two weeks away, Democratic gubernatorial candidates U.S. Rep. Charlie Crist and Agriculture Commissioner Nikki Fried have stepped into the battle ring, taking aggressive shots at their opponents in new political ads and campaign messaging.
As the current Democratic underdog in the race, based on current polls, Fried has been questioning the character of Charlie Crist and the authenticity of his Democratic policies, often reminding her audience of his previous actions as a Republican governor.
Crist has largely kept his focus on unseating Republican Gov. Ron DeSantis. (Keep in mind that Crist also has been a GOP Attorney General and Education Commissioner in the past.)
But now, with the release of new campaign ads, the gloves are off as the Aug. 23 primaries loom.
The ads are a significant tone-shift from just Tuesday, when the two candidates had separate ‘conversations’ with a panel of journalists — Fried matter-of-factly criticized Crist, and Crist didn’t mention Fried at all.
Fried’s new ad reflects on Crist’s time as a Republican governor, when he appointed Charles Canady to the Florida Supreme Court. Fried’s ad calls the justice an “anti-choice extremist.” The video ends with the sentiment that Floridians “just can’t trust Charlie Crist. Not as a Republican. Not as a Democrat. Not at all.”
And on Twitter, Fried tweeted an audio recording from Crist’s previous bid for governor, saying that Crist is “proud of (his) pro-life record” and promising to support a Constitutional amendment to protect “traditional marriage” — which is a stand-in for saying that he would oppose same-sex marriage equality.
But just the day before, on Aug. 4, Crist’s campaign team released their own attack ad on Fried, also calling into question her own relationship to the Republican Party.
The ad highlights Fried previously donating to Ashley Moody, who was running as a Republican for the Attorney General position. Division of Elections contributions show $2,000 from Fried to Moody for the 2018 campaign. Moody has served as the legal arm of enforcement for some of DeSantis’ right-wing political efforts.
The Crist video also questions her allyship with U.S. Rep. Matt Gaetz. The ad claims that Fried and Gaetz are “close friends and allies.”
Gaetz is a Republican and vocal supporter of former President Donald Trump. Gaetz is under investigation for “possibly having sex with a 17-year-old and then paying for her to travel over state lines,” according to Orlando Weekly.
Gaetz was a state lawmaker between 2010 and 2016, and Politico reported this week that Fried became friends with Gaetz at that time during discussion over medical marijuana. Fried was a lobbyist for much of that time, according to Florida lobbyist registration data. Fried is no longer friends with Gaetz, according to Politico.
Fried is not new to calling out her primary opponent. For example, on June 27 she tweeted: “Democrats, Charlie Crist couldn’t even beat Rick Scott, the most unpopular governor in modern Florida history. I’ve actually won Florida as a Democrat, the only one since 2012. It’s time to make a choice.” This is a reference to the 2014 race for governor, when Crist, then a Democrat, lost to Scott.
Until recently, Crist largely ignored Fried’s messaging, even to a point where he refused a reporter’s question about Fried’s criticism of Crist’s spotty record on abortion rights, replying that “I don’t respond to her.”
In addition to her role as Agriculture Commissioner, Fried is a statewide elected Cabinet member, an attorney, a former public defender and a former lobbyist on cannabis issues.
But that tone started to shift, specifically during their only one-on-one debate for the primaries, when he referred to her participation in the debate as the “voice of desperation.”
Fried’s campaign team took note of Crist’s attack, and in a memo said that he’s “gone negative” in his battle against Fried.
“We knew it would happen, we just didn’t know the exact date. Now we do. On June 23, 2022, Charlie Crist realized he will likely lose this primary and so he’s gone negative, in the most inappropriate of ways.”
Primary election day is Aug. 23 and mail-in ballot voting has already begun.
by Danielle J. Brown, Florida Phoenix
August 5, 2022
by Danielle J. Brown, Florida Phoenix
August 5, 2022
With the primaries just over two weeks away, Democratic gubernatorial candidates U.S. Rep. Charlie Crist and Agriculture Commissioner Nikki Fried have stepped into the battle ring, taking aggressive shots at their opponents in new political ads and campaign messaging.
As the current Democratic underdog in the race, based on current polls, Fried has been questioning the character of Charlie Crist and the authenticity of his Democratic policies, often reminding her audience of his previous actions as a Republican governor.
Crist has largely kept his focus on unseating Republican Gov. Ron DeSantis. (Keep in mind that Crist also has been a GOP Attorney General and Education Commissioner in the past.)
But now, with the release of new campaign ads, the gloves are off as the Aug. 23 primaries loom.
The ads are a significant tone-shift from just Tuesday, when the two candidates had separate ‘conversations’ with a panel of journalists — Fried matter-of-factly criticized Crist, and Crist didn’t mention Fried at all.
Fried’s new ad reflects on Crist’s time as a Republican governor, when he appointed Charles Canady to the Florida Supreme Court. Fried’s ad calls the justice an “anti-choice extremist.” The video ends with the sentiment that Floridians “just can’t trust Charlie Crist. Not as a Republican. Not as a Democrat. Not at all.”
And on Twitter, Fried tweeted an audio recording from Crist’s previous bid for governor, saying that Crist is “proud of (his) pro-life record” and promising to support a Constitutional amendment to protect “traditional marriage” — which is a stand-in for saying that he would oppose same-sex marriage equality.
But just the day before, on Aug. 4, Crist’s campaign team released their own attack ad on Fried, also calling into question her own relationship to the Republican Party.
The ad highlights Fried previously donating to Ashley Moody, who was running as a Republican for the Attorney General position. Division of Elections contributions show $2,000 from Fried to Moody for the 2018 campaign. Moody has served as the legal arm of enforcement for some of DeSantis’ right-wing political efforts.
The Crist video also questions her allyship with U.S. Rep. Matt Gaetz. The ad claims that Fried and Gaetz are “close friends and allies.”
Gaetz is a Republican and vocal supporter of former President Donald Trump. Gaetz is under investigation for “possibly having sex with a 17-year-old and then paying for her to travel over state lines,” according to Orlando Weekly.
Gaetz was a state lawmaker between 2010 and 2016, and Politico reported this week that Fried became friends with Gaetz at that time during discussion over medical marijuana. Fried was a lobbyist for much of that time, according to Florida lobbyist registration data. Fried is no longer friends with Gaetz, according to Politico.
Fried is not new to calling out her primary opponent. For example, on June 27 she tweeted: “Democrats, Charlie Crist couldn’t even beat Rick Scott, the most unpopular governor in modern Florida history. I’ve actually won Florida as a Democrat, the only one since 2012. It’s time to make a choice.” This is a reference to the 2014 race for governor, when Crist, then a Democrat, lost to Scott.
Until recently, Crist largely ignored Fried’s messaging, even to a point where he refused a reporter’s question about Fried’s criticism of Crist’s spotty record on abortion rights, replying that “I don’t respond to her.”
In addition to her role as Agriculture Commissioner, Fried is a statewide elected Cabinet member, an attorney, a former public defender and a former lobbyist on cannabis issues.
But that tone started to shift, specifically during their only one-on-one debate for the primaries, when he referred to her participation in the debate as the “voice of desperation.”
Fried’s campaign team took note of Crist’s attack, and in a memo said that he’s “gone negative” in his battle against Fried.
“We knew it would happen, we just didn’t know the exact date. Now we do. On June 23, 2022, Charlie Crist realized he will likely lose this primary and so he’s gone negative, in the most inappropriate of ways.”
Primary election day is Aug. 23 and mail-in ballot voting has already begun.
Florida Phoenix is part of States Newsroom, a network of news bureaus supported by grants and a coalition of donors as a 501c(3) public charity. Florida Phoenix maintains editorial independence. Contact Editor Diane Rado for questions: [email protected]. Follow Florida Phoenix on Facebook and Twitter.
Our stories may be republished online or in print under Creative Commons license CC BY-NC-ND 4.0. We ask that you edit only for style or to shorten, provide proper attribution and link to our web site. Please see our republishing guidelines for use of photos and graphics.
Danielle J. Brown is a 2018 graduate of Florida State University, majoring in English with a focus in editing, writing, and media. While at FSU, she served as an editorial intern for International Program’s annual magazine, Nomadic Noles. Last fall, she fulfilled another editorial internship with Rowland Publishing, where she wrote for the Tallahassee Magazine, Emerald Coast Magazine, and 850 Business Magazine. She was born and raised in Tallahassee and reviews community theater productions for the Tallahassee Democrat. She spends her downtime traveling to all corners of Florida and beyond to practice lindy hop.
DEMOCRACY TOOLKIT
© Florida Phoenix, 2022
The Phoenix is a nonprofit news site that’s free of advertising and free to readers. We cover state government and politics with a staff of five journalists located at the Florida Press Center in downtown Tallahassee.
Our stories may be republished online or in print under Creative Commons license CC BY-NC-ND 4.0. We ask that you edit only for style or to shorten, provide proper attribution and link to our web site.
Dragon Ball: Even Master Roshi Could Beat The Saiyan Saga’s Vegeta Now – Screen Rant
At this point in the Dragon Ball timeline, even Master Roshi would have what it takes to single-handedly beat Vegeta and Nappa in the Saiyan Saga.
At this point in the Dragon Ball timeline, even Master Roshi would have what it takes to beat the Saiyan Saga’s Vegeta. When that storyline played out in Dragon Ball Z, Master Roshi was so weak in comparison to everyone else that he stayed at home during all the fighting. The Saiyan Prince was such a powerful villain that no one character was able to beat him without help.
Many of the Z-Warriors have improved a great deal since Dragon Ball Z’s first saga. Back then, Goku was considered to be the Earth’s only hope against the two villains. Four of the heroes died before they could get past Nappa. And while Goku did overpower Vegeta in a one-on-one fight, he couldn’t handle his opponent’s Great Ape transformation. In the end, it took Krillin, Gohan, and some last-minute heroics from Yajirobe for them to survive the battle with Vegeta. Now, of course, nearly every character present that day is levels above their Saiyan Saga power level. The challenges and training they’ve endured have made characters like Goku, Vegeta, and Gohan so strong that they could beat any Dragon Ball villain.
It’s not just the top Z-Warriors who have reached new heights in the Dragon Ball franchise. The fights that took place in Dragon Ball Super’s Tournament of Power revealed that Master Roshi himself has become a force to be reckoned with, even by the current standards of the anime. He’ll never be in the same league as the show’s Saiyan heroes, but his ability to challenge Goku in his base form and defeat Universe 4’s Ganos is indicative of just how far he’s come. Goku realized firsthand that Roshi has been training in secret. If he had that power in Dragon Ball Z’s Saiyan Saga, the Turtle Hermit could have singled-handedly trounced both Vegeta and Nappa.
The idea that a character who wasn’t strong enough to even bother challenging Nappa is now above the Saiyan Saga’s Vegeta speaks volumes about the progression of power levels in the Dragon Ball anime. After all, these changes aren’t exclusive to Roshi, as Yamcha, Krillin, and Tien are all more powerful than him, and in turn are easily capable of beating not only Saiyan Saga’s Vegeta, but also Dragon Ball Z’s Frieza and presumably Perfect Cell as well. It seems that the passing of time and intense training has done wonders for these characters. As for the Z-Warriors above them, their respective power levels are off-the-charts. Based on what’s been shown, Piccolo could most likely defeat Majin Buu now.
The insane adjustments that have been made to Dragon Ball’s power structure have benefited some more than others while a few haven’t been affected at all. While Chiaotzu continues to linger at the bottom with little to no improvements, Yamcha, Krillin, Tien, and Master Roshi have gotten considerably stronger, though not enough to make a difference in high-stakes battles. Goku, Vegeta, Gohan, and Piccolo, on the other hand, keep climbing higher and higher with no signs of stopping.
Nicholas Raymond is a staff movies & TV features writer for Screen Rant. He has a degree in journalism from the University of Montevallo, and is the author of the psychological thriller and time travel novel, “A Man Against the World.” Nicholas’ love for telling stories is inspired by his love for film noir, westerns, superhero movies, classic films, and ancient history. His favorite actors are Tyrone Power and Eleanor Parker. He can be reached by email at [email protected] and on Twitter at @cnraymond91.
Jalen Rose learns what goes into a No. 1 song with producer Hit-Boy – New York Post
Thanks for contacting us. We've received your submission.
Some might remember Myspace as a fleeting blip in the short history of social media. But for my “Renaissance Man” guest, the platform opened the door to a constellation of stars. I mean superstars. People by the names of Kanye West, Nas, Kendrick Lamar, Jay-Z and Beyoncé.
Chauncey Hollis Jr., who is better known by his stage name Hit-Boy, started posting his beats on the now-defunct site Myspace and he caught the eye of megaproducer Polow da Don, who plucked him out of obscurity. The rest is Grammy history. The producer/performer now has three of them, long-standing collaborative relationships with all the big artists in nearly every genre from soul to rap and a new single “Scholar.”
Yes, the Southern California native started creating his own music in high school, but he’d learned the industry as a young kid purely by osmosis.
“My uncle was in a group called Troop, so early on in my early days, I watched his whole process,” he told me.
“I got to go to video shoots, so I got to go to studio sessions. Like the fashion, just the whole lifestyle I got to see that side of things. So I was already kind of getting bred for music without even realizing it. It was just downloading into my DNA. So that was a good thing about just being out here, just all the creativity and the people that were doing something with music or just something in the arts,” continued Hit-Boy.
Before his musical talent crystallized in the 10th grade, the now-35-year-old was busy playing basketball.
“I actually played basketball my whole ninth-grade year. And then I was about to start playing my sophomore year and I started making beats a couple weeks before the season started,” he said.
He told his coach that he wasn’t playing anymore and he wanted to make beats every day. “He was like, ‘What are you talking about?’ He was confused. And I just knew back then I was like, ‘Man, I’m doing this one way or another.’”
And even though he was making a racket in the house at all hours, his mother was always behind him and his dreams — though I can assume she had a good set of earplugs for nighttime.
“She would let me make music all hours,” he said. Even friends and family would ask: “‘Why do you let him just make this random noise? Like it’s just too loud? What was going on?’ And she just was happy that I was in a crib doing something productive.”
Productive is an understatement. He had a lot of success, including a notable relationship with Kanye with whom he had a falling out. The rapper the Game has brought them back together, so who knows what they’re cooking up now. He also produced Beyoncé’s “Thique” off her new “Renaissance” album, out last Friday. But we spoke just before it was released, so he didn’t want to be presumptuous that they chose the track.
Hit-Boy said, “I can’t get my hopes up because you got millions of people to beat out to even get on an album. So that’s just if it really goes down, it’s an honor. But I still it’s like unbelievable still to be there.”
I may be partial, but my favorite Hit-Boy production is Big Sean’s “What a Life” because it contains the lyric “My brother Jalen Rose got an academy. Dis ain’t a game.” He said Big Sean has always sharpened him artistically.
Hit-Boy said: “We know our bond is developed on a friendship level, but just on a music level, I feel like he’s pushed me to the point where it’s like don’t settle your first idea. He might do something that I think is incredible, he’ll take a listen to it for a few days and be like, ‘Nah, I think I can level that up. I can say it in a quicker, more clever way.’ Just to see him put these words together like that, it’s like unbelievable.”
Someone he hasn’t worked with who’s on his collaboration bucket list? That would be Kodak Black. But there is one requirement when working with Hit-Boy (who’s constantly juggling work and family): You must be good with kids. So Kodak, start reading “The Baby-Sitters Club.”
“I got a 2-year-old son, so sometimes know I might have to bring him into the studio,” he said.
If he’s Hit-Boy’s boy, I’m sure he’s already dropping beats and is probably featured on Nas’ next album.
Detroit native Jalen Rose is a member of the University of Michigan’s iconoclastic Fab Five, who shook up the college hoops world in the early ’90s. He played 13 seasons in the NBA, before transitioning into a media personality. Rose is currently an analyst for “NBA Countdown” and “Get Up,” and co-host of “Jalen & Jacoby.” He executive produced “The Fab Five” for ESPN’s “30 for 30” series, is the author of the best-selling book, “Got To Give the People What They Want,” a fashion tastemaker, and co-founded the Jalen Rose Leadership Academy, a public charter school in his hometown.
Share Selection
TikTok goes on AI music making and machine learning hiring spree – Music Business Worldwide
The AI-powered music-making app business is hotting up.
In May, music-making platform Splice, reported to be valued at nearly $500 million, launched an artificial intelligence-powered music app called CoSo, which uses what Splice calls its ‘Complementary Sounds’ AI technology to create music “in split-seconds”.
Bandlab, meanwhile, the social music-making platform that recently raised $65 million, has an AI-powered app called SongStarter that, it claims, can “generate royalty-free music in seconds”.
Could TikTok and parent ByteDance be one of the sector’s next major players?
Back in July 2019, ByteDance acquired Jukedeck, a UK-based AI Music startup that specialized in creating royalty-free music for user-generated online videos.
This year, the company appears to be doubling down on its AI-powered music-making ambitions.
In May, ByteDance launched Mawf, a machine-learning driven music-making app that analyses incoming audio signals and then “re-renders” those signals using what it says is machine learning models of musical instruments.
Additionally, according to a report from news site Tech Planet, ByteDance has also launched a music creation app in China called ‘Sponge Band’.
According to Tech Planet, this recording and music editing app also features AI tools, and notes that it is particularly “helpful for users who want to further improve audio effects and background music for short videos”.
Now, according to a number of job ads spotted by MBW, TikTok and parent company ByteDance are hiring for a number of highly-skilled specialists in machine learning and AI music creation in both the US and China.
Here are some of those roles:
According to the job description for this role, which is based in Mountain View, California, this person will, “conduct cutting-edge research and development in music creation tools to lower the music creation barrier for everyone”.
They will also be required to “transfer advanced technologies to TikTok products” and to, “explore new products with music intelligence technology at its core”.
Elsewhere in the job ad, TikTok says that this “team’s mission is to empower content interaction and creation using speech/audio/music related technologies”.
The ad continues: “We focus on cutting-edge R&D in speech, audio, and music processing. We are looking for top talents to work on music creation tools, integrate them into various TikTok products and ultimately bring the joy to our global user base!”
This person, to be based in Seattle, according to the ad, will “conduct cutting-edge research and development in music information retrieval, music creation, music/audio signal processing, interactive music and related fields”.
Candidates will need to have either a Masters or PhD in computer science, mathematics, engineering or a related field.
They will also be expected to have experience in one or more areas of “music intelligence” and deep learning, including but not limited to:
According to TikTok, this Seattle-based role will involve “cutting-edge research and development in multimodal machine learning models (audio, vision, music and text).”
TikTok says this person will need to have, “experience in multimodal machine learning across speech & audio, computer vision, NLP and music information retrieval fields”.
“The speech audio music team mission is to empower content interaction and creation using speech & audio related technologies,” states the ad.
“We are focus[ed] on cutting-edge R&D in areas like speech & audio, music processing, natural language understanding and multimodal deep learning, we are looking for top talents to work on these exciting technologies, integrate them into various TikTok products and ultimately bring the joy to our global user base!”
According to the ad (translated), this Beijing-based engineer will be responsible for “research and development and business support of Bytedance’s audio content creation and consumption business scenarios”.
This person will need to have “rich experience in digital signal processing and artificial intelligence/deep learning system development”.
This experience will also need to be in the fields of “3D spatial audio rendering, audio preprocessing such as noise reduction/echo/de-reverberation, voiceprint/awakening, sound event detection, speech recognition, natural language”.Music Business Worldwide
The best of MBW, plus the most important music biz stories on the web. Delivered for FREE, direct to your inbox each day.
Double ring bending tests on heat pretreated soda–lime silicate glass – Glass on Web
OR
Date: 5 August 2022
Authors: Gregor Schwind, Fabian von Blücher, Michael Drass & Jens Schneider
Source: Glass Structures & Engineering | https://doi.org/10.1007/s40940-020-00129-3
The strength of glass plays an important role in the dimensioning of glass components in the building industry. Here, not only parameters such as support conditions, loading rate, relative humidity etc. play an important role, but the damage by means of scratches also determines the fracture strength of glass. A heat treatment after damaging may have an influence on the resulting glass strength. The correlation between heat treatment temperature, and in particular elevated temperatures up to the glass transition temperature, and fracture stress has been studied by different researchers with several approaches of pre-treatment of specimens and test setups.
This paper methodically presents various preliminary investigations which were carried out within the framework of the pre-treatment of the samples in order to investigate the influence of heat treatment of the pre-damaged samples on the fracture stress. For this purpose, double ring bending tests were performed at room temperature on pre-damaged, heat-treated soda–lime silicate glass specimens. The aim of the investigations is to obtain estimates of the extent to which a heat treatment prior to the strength test influences the fracture strength of soda–lime silicate glass. Parameters like the heat treatment temperature, the dwell time of the samples inside the furnace and the furnace design were considered. The results show that the heat treatment can increase the fracture stress of soda–lime silicate glass as float glass significant due to an assumed healing of the pre-damage during heat treatment.
A major factor determining float glass strength is damage such as scratches or cracks due to the brittle material behavior of glass. Scratches and cracks can be caused by the float glass process itself, the cutting after the float process or also maybe by transport afterwards. With regard to the later dimensioning of glass constructions made of float glass in the building industry, the influence of these damages on the computationally usable material strength is reflected. Due to the fact that the usable bending strength of float glass is low compared to thermally toughened glass, the use of thermally toughened glass sheets is advantageous. However, the toughening process of the glass also increases its price, which causes the material costs of glazing to rise.
If the strength of float glass could be increased by another treatment at lower temperatures, more float glass could possibly be used for glazing. Another application in building industry is fused deposition modelling of glass (Seel et al. 2018a), or simply speaking 3-D printing of glass. Due to the printing process, defects and voids can occur (Seel et al. 2018b) within the additive manufactured component. These flaws represent notches or cracks in the brittle material, which can lead to stress peaks and a comparatively less resistance of the glass. Based on the current state of research, the question has been raised whether the strength of pre-damaged soda–lime silicate glass as float glass can be increased by means of heat treatment, which does not correspond to thermal toughening.
Heat treatments of soda–lime silicate glass as float glass have so far been largely carried out at elevated temperatures (550 to 725 ∘C) by Shinkai et al. (1981), Manns and Brückner (1983), Hrma et al. (1988), Holden and Frechette (1989), Girard et al. (2011), Doquet et al. (2014) and Zaccaria and Overend (2016), although lower temperatures (300 ∘C) have also been used (Wiederhorn 1969). In some investigations, the humidity during heat treatment was regulated within the furnace chamber (Holden and Frechette 1989; Girard et al. 2011). Furthermore, the dwell time of the samples at the temperature varied also in the different publications.
The heat treatment Wiederhorn (1969) used, was 1 h at 300 ∘C to dry the specimens and relieve residual stresses within the glass. The procedure of drying the samples was carried out in order to be able to perform tests in an inert environment (with regard to stress corrosion cracking of glass due to water). Girard et al. (2011) varied the moisture content of the ambient air during heat treatment up to a maximum of 75% RH. Dry ambient conditions were achieved with the aid of noble gas (argon). The heat treatments for crack healing investigations were carried out at temperatures between 550 ∘C (glass transition temperature) and 620 ∘C (softening point of the investigated soda-lime silicate glass). The dwell time of the samples within the furnace and the ambient environment varied between 1 and 28 h in order to be able to investigate the influence of time on crack healing.
Manns and Brückner (1983) used 4 h and 600 ∘C with ambient humid conditions as heat treatment before testing the samples via double ring bending test. They observed that the bending strength of the investigated soda–lime silicate glass as float glass increased. Hrma et al. (1988) also observed crack healing due to the strength test after heat treatment. In their studies they could observe that even a short heat treatment (15 min to 1 h) can influence the resulting fracture strength of soda–lime silicate glass. Holden and Frechette (1989) used a temperature of 550 ∘C with different dwell times and different time spans for the presence of humidity for their heat treatment experiments.
They concluded that a combination of humidity which also has to be present before the heat treatment in combination with an elevated temperature (550 ∘C) may heal cracks as pre-damage in soda–lime silicate glass as float glass. The studies of Holden and Frechette (1989) and Girard et al. (2011) showed, that crack healing occurs at elevated temperatures (550 ∘C). Holden and Frechette (1989) and Girard et al. (2011) observed, that if even slight humidity is present during the heat treatment cracks in soda–lime silicate glass heal better than without humidity.
For the own investigations which are presented in the following the experience in heat treatment given by the past research will be taken into account. Therefore, two temperatures were chosen: lower temperature of 300 ∘C from the studies of Wiederhorn (1969) and elevated temperature of 550 ∘C from other studies (Holden and Frechette 1989; Girard et al. 2011). As material, commercial soda–lime silicate glass is used for the investigations presented here. It is assumed, based on the results of Girard et al. (2011) that the glass transition temperature of this glass is at 550 ∘C. After heat treatment the specimens are tested via double ring bending test at room temperature. Since the furnace design and the experimental set-up for heat treatment, the procedure of pre-damaging and strength test form the basis for a comprehensible experimental procedure, particular importance is given in this publication to describing the used experimental methods in detail.
For the calculation of the stresses caused by double ring bending (see Fig. 1a, b) at room temperature, the theory of the axisymmetric plate with consideration of a linear elastic material law may be applied. The deformations that occur in the experiment are relatively small (w/2r₂≪1), which is why effects from geometric nonlinearity can be omitted. In EN 1288-1 (2000) the analytical Eq. (1) is given to calculate the tensile stresses arising in the double ring bending test. In EN 1288-1 (2000) the influence of geometry (r₁, r₂, r₃) and Poisson’s ratio is summarized with the factor K₁. For the test setup R30 according to EN 1288-5 (2000) with consideration of Poisson’s ratio ν = 0.23,K₁ results to 1.09 and Eq. (1) may then be simplified to Eq. (2). The samples used here had a nominal diameter of 70 mm and deviate from the normative specification (d=66 mm). If the diameter of 70 mm and a Poisson’s ratio of 0.22 (assumption) is used to determine K₁, a value of 1.069 results for K₁, which is 2% lower than 1.09.
Pre-damaging and storage of the samples
In the first step of pre-treatment, the specimens were pre-damaged with the aid of the Universal Surface Tester (UST, see Fig. 2a). The UST is typically used to scan surfaces for creating surface profiles, indentation and scratching. For the investigations, a conically milled diamond with an angle of 120∘ and a 5 μm radius of curvature at the tip of this cone was used as an indenter (see Fig. 3a, b) to induce a scratch (artificial flaw) on the glass surface (air or tin side of specimen). Ultraviolet light was used to determine the tin side of the sample. The tin ions embedded in the surface by the float process light up brightly under the ultraviolet light. The induced scratch (see Fig. 2b) is intended to represent the influence of surface flaws, which can be caused by flat glass production itself, transport and handling of glass products.
With the presented settings in the list below (Hilcken 2015) the artificial flaw was induced in the glass surface. This type of artificial flaw causes, when performing double ring bending tests, fracture stresses which correspond to the 5% quantile value of the fracture stress of float glass defined in standards [45 MPa according to EN 572-1 (2016)]. The parameters for pre-damaging were selected as follows:
During the initiation of the scratch, the specimen is fixed on the support table (see Fig. 2a) by means of backside vacuum. The surrounding environment during scratching was standard climate (23 ∘C, 50% RH). Finally, the table is moved unidirectionally by 2 mm with a velocity of 1 mm/s. Simultaneously, a force of 500 mN acts on the indenter and thus on the glass surface. The scratch resulting on the specimen’s surface can be seen exemplary in Fig. 2b. The fracture origin of specimens flawed with the presented technique is typically located at this artificial flaw (assuming that the flaw lies within the load ring) when performing double ring bending tests. In the next step of pre-treatment, the specimens were stored at least for one week in a standard climate (23 ∘C, 50% RH) (Hilcken 2015).
Then, in the last pre-treatment step, the samples were heat treated in a radiation furnace. The heat treatment is intended to study a possible increase of fracture strength by healing the induced scratch. Furthermore, the heat treatment serves to harmonize the material samples in order to eliminate any residual stresses (Shinkai et al. 1981; Wiederhorn 1969) in the glass that may occur as a result of the induced scratch (Assmann et al. 2019). Heat treatment studies were carried out, due to a furnace change and the determined fracture stresses, which are presented in Sects. 3.3 and 3.4.
Experimental test setup for strength tests: double ring bending test at room temperature
For the determination of the fracture strength of the heat treated soda–lime silicate glass specimens, the double ring bending test was conducted at room temperature and around 50% RH. The specimens used in the studies were circular in shape with a nominal diameter of 70 mm and a nominal thickness of 4 mm or 6 mm. The samples were cut from a flat glass at the factory and the cut edges were coarsely ground. The air or the tin side of the specimens was exposed to tensile stress. A universal testing machine was used for this purpose. Figure 4a, b show the test setup, whereby it should be mentioned that the sample was bonded with a foil on the bending pressure side in order to hold the fragments of the specimen together after fracture.
The test setup R30 was used on the basis of EN 1288-5 (2000), whereby the nominal diameter of 70 mm deviates from the standard (d=66 mm). The tests were performed force-controlled with a load rate of 28 N/s for the 4 mm thick specimens (64 N/s for the 6 mm thick specimens). The analytical solution of the double ring bending test at room temperature, see Sect. 2, was used to determine the stress on the glass surface. If force and glass stress are known and a linear elastic material behavior is present (room temperature), the required load rate to obtain a stress rate of 2 MPa/s (EN 1288-5 2000) can easily be calculated by Eq. (3).
Study of heat treatment—Method A
The following sections describe the first study for the heat treatment of the tested material specimens prior to the performed double ring bending tests with the test setup according to Sect. 3.2. The material samples were pre-damaged (flaw on the air side of the specimen) and stored according to Sect. 3.1.
In this first study—Method A, three test series with ten specimens each with a nominal thickness of 6 mm were prepared. The background for this study was to check how far the heat treatment of the specimen is related to the fracture stress. In order to investigate the fracture stress of the specimens after heat treatment, double ring bending tests were performed at room temperature for all 30 specimens with the test setup presented in Sect. 3.2. The following list gives an overview of the series for the study:
After 30 samples were stored for at least seven days (Hilcken 2015) in standard climate, the samples of the KN_V2 and KN_V3 series were heat treated with the aid of the radiation furnace shown in Fig. 5a, b. Since a series contained ten samples and five specimens could be placed on each grate (see Fig. 5b), one test series was always heat treated together. The initial temperature for the heat treatment was around room temperature. The specimens were placed on the grates with the pre-damaged air side (where the scratch is located) facing upwards. The background was: if the flawed side lies directly on the grate, the handling of the specimens may result in further flaws, which may be more severe than the already applied scratch. One issue was that the humidity inside the furnace chamber could not be recorded during the heat treatment. It is assumed that the relative humidity inside the furnace chamber at the beginning of the heat treatment (room temperature) was around 30 to 40% RH.
For the heat treatment it was planned, that the samples should be exposed to the respective target temperature for half an hour as scheduled (see solid lines in Figs. 6a, 7a). However, the test showed that, according to the air temperature shown on the display of the furnace (the temperature measured by the furnace itself by means of a permanently installed thermometer), the furnace reached the target temperature (300 ∘C or 550∘ C) after approximately 10 min. After the 10 min of heating, the desired target temperature was maintained for another half an hour. Afterwards the furnace was switched off manually and the furnace cooled down naturally due to its insulation.
An independent thermocouple (recording frequency of fI ≈ 0.006 Hz) was installed afterwards for a second experiment to check the temperature which was measured by the furnace itself. It should be noted that, during the temperature measurements shown Figs. 6a and 7a just the grate without specimens was inside the furnace chamber, because there were no further test series foreseen at this stage. Due to the missing mass of the glass it may be possible that the heating ramp profile could change. The temperatures measured with the thermocouple are shown in Fig. 6a respectively Fig. 7a (dashed lines). As can be seen from the graphs the target temperature of 300 ∘C respectively of 550 ∘C was nearly reached after approximately half an hour. A maximum temperature of 285 ∘C respectively 525 ∘C was measured.
From the graphs it can be observed, that the samples have not been exposed to the desired dwell time of half an hour at the target temperature. The fact that the furnace has finished heating up after approximately 10 minutes, based on the temperature measured by the furnace itself, can also be analyzed by the heating rates shown in Figs. 6b and 7b. To determine the heating and cooling rates, the slope of the measured temperature curves in Figs. 6a and 7a was calculated. In Figs. 6a, b and 7a, b the X marks the point when heating ramp ended and the dwell time began. The end of the dwell time, when the furnace was switched of manually is marked with a circle in the diagrams in Figs. 6a, c and 7a, c. The heating rate which resulted for the 300 ∘C heat treatment was around 45 K/min (for 550 ∘C heat treatment it was around 55 K/min). It should be noted that the time axes shown in these diagrams represent shortened time segments of Figs. 6a and 7a.
By manually switching off the furnace after half an hour of dwell time (as scheduled) a natural cooling rate resulted, which was initially—14 K/min for the 300 ∘C heat treatment (− 6 K/min for the 550 ∘C heat treatment) and further decreased by temperature decrease. For the sake of illustration: the cooling rates used during thermal toughening reach initial values in the range of multiples of 1000 K/min (Barr 2015), which also decrease strongly and non-linearly. Due to the fact that the specimens cooling down with a comparatively low rate, it is assumed that the samples were not thermally toughened.
Table 1 Results of the tested series in study—Method A—double ring bending tests at room temperature – Full size table
Figure 8 shows the fracture stresses determined via double ring bending tests in comparison to the temperature during the heat treatment. The fracture stresses were calculated by Eq. (1). The specimens within this study—Method A were tested on the pre-damaged air side. In Table 1 the mean values of the test series are shown, whereby only eight specimens could be used for the test series KN_V1 (one specimen tested with different load rate, another was broken during installation). It can be seen that the heat treatment at measured 525 ∘C results in higher fracture stresses (comparing KN_V1), which can probably be linked to a healing of the induced scratch by elevated temperatures in combination with the moisture in the air of the furnace chamber (Holden and Frechette 1989).
Comparing the mean values of Table 1 it can be seen, that the heat treatment can increase the fracture stress up to 41% (comparing KN_V1 and KN_V3) of the pre-damaged specimen. Even a heat treatment at a lower temperature of 285 ∘C results in higher fracture stresses. An increase of the fracture stress of around 12% (comparing KN_V1 and KN_V2) can be observed. One possibility is that, also at lower temperatures in combination with the moisture in the air inside the furnace chamber crack healing effects occur.
It should be mentioned, that it is assumed that there was no thermal toughening of the specimens (KN_V2 and KN_V3), because the cooling rates in the furnace shown in Sect. 3.3.1 were far below cooling rates normally used in thermal toughening glass (Barr 2015). In addition, the temperatures used in heat treatment presented here were lower than those typically used in thermal toughening (620 ∘C, Barr 2015).
In the study—Method A investigating the influence of heat treatment on the fracture stress of soda–lime silicate glass, it was shown that the heat treatment of pre-damaged soda–lime silicate glass specimens can increase the bending strength extraordinary. In the experiment, where an elevated temperature was present (measured 525 ∘C), an increase of fracture stress of about 41% was observed. The past research of Holden and Frechette (1989) and Girard et al. (2011) could also observe crack healing at these elevated temperatures.
In the second case, where the temperature was lower (around 285 ∘C) also an increase of fracture stress could be observed, which does not seem logical, because the temperature for crack healing was too low (compared to Holden and Frechette 1989; Girard et al. 2011). For both experiments presented here it could also be shown, that even a very short dwell time at low or elevated temperatures may increase the fracture stress of the soda–lime silicate glass as float glass. Since the furnace for heat treatment of the material samples was changed in the further procedure, further studies of heat treatment (Method B) were carried out with a different furnace. These studies are presented in the following paragraphs.
Study of heat treatment—Method B
In the second study—Method B, a different radiation furnace (not identical in construction see Figs. 5, 9) was used, so further investigations on heat treatment were carried out. As in the first study—Method A, the specimens used in this study were pre-damaged using the method described in Sect. 3.1 and stored for at least seven days in standard climate. The following list gives an overview of the series for this study:
Figure 9a shows the used radiation furnace for the second study— Method B. The target temperature at which the heat treatment was scheduled had an upper limit of 300 ∘C in accordance to Wiederhorn (1969). To do so, the heating rate of the furnace was set to 10 K/min at the furnace control so that the air temperature will reach 300 ∘C after 0.5 h. The temperature of 300 ∘C was then kept almost constant for 4 h. After 4 h the furnace cooled down naturally due to its insulation. When comparing the walls of the two furnaces (Figs. 5b, 9b), it can be seen that the arrangement of the spiral-wound filaments within the chamber is different.
In the first furnace, the filaments are located on the left and right walls of the furnace chamber. These filaments hang freely in front of the wall (see Fig. 5b). In the second furnace, the filaments are located on the side walls and the top of the furnace chamber (see Fig. 9b). Here, the filaments are embedded in a temperature-resistant insulating material. The different design of the furnace chamber is expected to result in a different temperature profile (measurements). Due to the grate size of the furnace only eight material samples could be placed on the grate. Different temperature measurements by use of four type K thermocouples (see Fig. 10a) were carried out:
The thermocouples were inserted through the grate from below and recorded the air/surface temperature with a frequency of fII = 0.1 Hz near the specimen or on its surface. In order to check which temperature would be reached on the glass surface without radiation shielding, another measurement was carried out using two material samples. To do so thermocouples were bent onto the glass surface so that there was direct contact between thermocouple and glass surface (see Fig. 10b). The initial temperature for the heat treatment was around room temperature. The samples were placed on the grate with the pre-damaged tin side (where the scratch is) facing upwards according to Sect. 3.3.1. One issue is that the humidity inside the furnace chamber could not be recorded during the heat treatment. It is assumed that the humidity inside the furnace chamber at the beginning was around 30 to 40% RH.
The specimens were placed on the grate without protection against radiation (see Fig. 9b). The air temperature within the furnace chamber near the specimens was measured with four thermocouples (see Fig. 10a). It should be mentioned that the aluminum sheets to the left and right in Fig. 10a were not present. From the four measurements the mean value of air temperature, which is shown in Fig. 11a, was calculated.
The corresponding heating and cooling rates, which are shown in Fig. 11b, c, were calculated with the recorded time and mean temperature. It should be noted that the time axes in Fig. 11b, c represent sections of the axis from Fig. 11a. As can be seen from Fig. 11b, the target of heating the furnace at 10 K/min could not be achieved due to a non-optimized (optimization regarding electric power) furnace control. After half an hour, the heating ramp ended as scheduled at a measured mean air temperature of around 280 ∘C. After 4 h dwell time at 300 ∘C target temperature, the furnace switched itself off and cooled down naturally.
In order to determine the temperature that occurs on the glass surface of the specimens during heat treatment, another temperature measurement was carried out on two specimens. For this purpose, thermocouples were bent onto the glass surface of the samples so that the thermocouples were in direct contact to the surface (see Fig. 10b). The two specimens were used from the KN_V5 series, so that finally only six specimens (see Table 2) were available for evaluation of this series. If Figs. 11 and 12 are compared with each other, it can be seen that the qualitative trends are quite similar. However, at the maximum temperature measured during the heating ramp, it can be seen that the air temperature reaches a maximum value of approximately 330 ∘C (Fig. 11a—single air temperature) and the surface temperature a value of approximately 354 ∘C (Fig. 12a—single surface temperature).
A difference of 24 K (temperature overshoot) between air and surface temperature and a difference of 54 K between target and surface temperature can be observed. These differences show the occurrence of higher surface temperatures during the heating ramp due to a non-optimized furnace control. A second observation shows that, after the thermal equilibrium was reached (around 1 h after the beginning of the experiment), the surface temperature reached the target temperature of 300 ∘C. A result of the observations is that the radiant energy emitted by the spiral-wound filaments generates a comparatively higher surface temperature than the air temperature.
In order to exclude the temperature overshoot during the heating ramp, as shown in Fig. 9c and as already mentioned before, a radiation shielding, which was built using aluminum sheets (hereinafter also called aluminum enclosure), was provided inside the furnace. This created a chamber within the furnace which massively disturbs the convection within the furnace chamber, which otherwise would have been free to develop. Due to the installation of the aluminum enclosure inside the furnace chamber, the experimental setup for heat treatment had changed and a further measurement of temperature was performed.
The specimens were placed on the grate protected against thermal radiation (see Fig. 9c) with the help of the aluminum enclosure. The aluminum sheets were placed around the specimens and build a radiation shielded room within the furnace chamber. The air temperature within this room was measured with four thermocouples near the specimens (see Fig. 10a). For clarification, the upper cover of the aluminum enclosure, which is not shown in Fig. 10a, was also present during this air temperature measurement. From these four measurements the mean value, which is shown in Fig. 13a, was calculated. The corresponding heating and cooling rates, which are shown in Fig. 13b, c, were calculated with the recorded time and mean temperature. In Fig. 13a it can be observed that due to the disturbed convection inside the furnace chamber it took around three hours (from the beginning of the experiment) when the thermal equilibrium was reached within the aluminum enclosure.
This can be observed considering the mean air temperature curve which slightly increases (curve between 0.5 and 3 h in Fig. 13a) after the heating ramp ended. The specimens that were heat treated with the aluminum enclosure thus underwent a temperature of approximately 200 ∘C. There is a difference of 100 K (comparing surface temperature measured in Sect. 3.4.3 and air temperature measured here) between the heat treatment with radiation shielding and without radiation shielding. Considering Fig. 13a, a smaller but existing temperature overshoot is shown in comparison to the previous air temperature measurements. Furthermore, it should be mentioned that, the installation of the thermocouples did not allow the furnace door to be closed completely, resulting in a small gap which allows a comparatively higher air exchange than when the furnace door is completely closed. It is assumed that a slight exchange of air is possible even when the oven door is closed.
If the heating rates shown in Figs. 11b and 13b are compared, the effect of radiation shielding also becomes visible. The heating rates in the single heating periods when the furnace is heated up in the beginning of the heat treatment reach only half the values with radiation shielding as without radiation shielding. When considering the cooling rates, the difference is smaller and does not play as an important role as the heating rate difference.
Table 2 Results of the tested series in study—Method B—double ring bending tests at room temperature – Full size table
In order to determine to what extent, the heat treatment of the second study—Method B affects the fracture stress of the material specimens, double ring bending tests were carried out at room temperature as in the first study—Method A. Figure 14 shows the fracture stresses versus the used technique (and subsequent temperature) in heat treatment. The fracture stresses were calculated by Eq. (1). The specimens within this study—Method B were tested on the pre-damaged tin side. In Table 2 the mean values of the test series are shown. The test series KN_V4 and KN_5 consist of eight samples each which were subjected to heat treatment. For series KN_V4, however, one specimen broke when installed in the test apparatus, so only seven specimens were evaluated. For series KN_V5, two samples were subjected to heat treatment twice to measure the temperature on the glass surface (see Sect. 3.4.3), so only six specimens were analyzed.
When comparing the mean values of the fracture stress, it can be seen that, without the aluminum enclosure during the heat treatment, approximately 8% higher fracture stresses result comparing KN_V4 and KN_V5, which is possibly related to the fact, that a higher temperature (around 300 ∘C, see surface temperature measurement Sect. 3.4.3) was present during heat treatment. Comparing the mean values of fracture stress of the test series KN_V1 and KN_V5 an increase of 13% can obtained. If the mean value of KN_ V4 (57.3 MPa) is compared with the mean value of the test series KN_V1 (untreated specimens, 54.7 MPa) a very slight increase of 5% of fracture stress can be obtained. Based on the small sample size, however, it can be assumed that the scatter of the fracture stress is relatively large. It cannot be concluded from the small amount of data whether crack healing effects have already taken place at 200 ∘C heat treatment.
In the second study—Method B several observations could be made. The first both measurements showed that due to the furnace design (radiation furnace) and the furnace control of heating it is possible that the surface temperature can exceed the target temperature (300 ∘C for Method B) set in the furnace control unit. A difference of 54 K between the surface and the target temperature could be observed. The second observation is that the air temperature and the surface temperature reached a difference of 24 K. These experiments have shown that there can occur a temperature overshoot on the glass surface. How large this overshoot will be, when using elevated temperatures (550 ∘C) cannot be stated at this time. To overcome this temperature overshoot, the aluminum enclosure was introduced.
The use of the aluminum enclosure during the measurements showed, that it has an influence (lower temperature than target temperature) on the resulting temperature profile. But still a relative overshoot during the heating ramp is present, which indicates that amount of electric power or the heating ramp rate (10 K/min) which can be regulated by the furnace control unit need to be lowered. From the results of the third measurement (heat treatment with radiation shielding) it could also be observed that a longer time span is needed for reaching the thermal equilibrium within the furnace. The time needed for thermal equilibrium within the first both measurements was at around 1 h (from the beginning of the experiment), in the third experiment it was reached after approximately 3 h. How the time needed for thermal equilibrium will change for other temperatures cannot be estimated at this time, because several experiments including measurements have to be conducted therefore.
In the subsequent determination of the fracture strengths, the influence of the different temperatures also became apparent, as in Method A. The samples that underwent a heat treatment at 300 ∘C (KN_V5) yielded on average higher fracture stresses than the samples that underwent a heat treatment at 200 ∘C (KN_V4, 8% of increase) or that were untreated (KN_V1, 13% of increase).
When comparing the mean values of the fracture stresses between KN_V1 (untreated) and KN_V4 (200 ∘C) nearly the same mean values of fracture stresses result, so it is possible that no crack healing during heat treatment occurred. At this stage of research, it is not possible to make a statistically reliable statement as to whether heat treatment at 200 ∘C results in higher fracture strengths, because the test series contained too less specimens.
The experimental investigations carried out so far showed that the heat treatment of pre-damaged soda–lime silicate glass as float glass can increase the fracture strength of the glass. In the study—Method A, where especially an elevated temperature of around 525 ∘C for a short time period (lower than 15 min) was used, an increase of the mean value of the fracture stress of around 41% could be observed comparing mean values of fracture stress of KN_V1 and KN_V3. Also, during heat treatment at lower temperatures (around 300 ∘C, both Method A and Method B) without radiation shielding, an increase of the fracture stress of the glass from approximately 12% (Method A) to 13% (Method B) could be observed, comparing with the untreated specimens of KN_V1.
It is not yet possible to make statistically sound statements on the relationship between heat treatment temperature and fracture strength at the current state of research, as the sample size of the test series with six to ten samples was very small. Nevertheless, the investigations have shown that the heat treatment can have an influence on the resulting fracture strength of the pre-damaged soda–lime silicate glass as float glass, which can be linked to a healing of the induced scratch. It could also be shown by surface temperature measurements (without radiation shielding) that the surface temperature of the glass samples is higher than the air temperature inside the furnace chamber, which can be explained by the furnace design (radiation furnace).
At the current state of the investigations it is not yet possible to predict how large the temperature differences between air and surface temperature can become if elevated temperatures (e.g. 550 ∘C) are used for heat treatment. It could also be shown that the overshoot of air temperature during the heating ramp also occurs (relatively) when the aluminum enclosure is applied. Another observation which was made is, that the time needed for thermal equilibrium when using a radiation shielding increases from 1 h to around 3 h (from the beginning of the heat treatment at 300 ∘C target temperature), which results from the disturbed free convection.
The measurements of air and surface temperature have also shown that the natural cooling of the furnace leads to cooling rates that are far below the rates used in the thermal toughening process. It is therefore obvious that the material samples were not thermally prestressed by the heat treatment prior to the double ring bending test, which might have been interpreted as a result of higher fracture stresses.
For future research concerning crack healing of pre-damaged soda–lime silicate glass as float glass as a result of heat treatment, various aspects have arisen on the basis of the present work which will be considered for future experiments. Past research has already shown that, heat treatment can be used to increase the resulting fracture strength of glass, although the approaches of the various sources differ from each other and also differ from the method of pre-damage and strength determination presented here. The literature (Holden and Frechette 1989; Girard et al. 2011) has shown that especially the moisture in combination with elevated temperatures are the driving factors for crack healing in soda–lime silicate glass. At the current state it was not possible to measure the moisture inside the furnace chamber. For future experiments the moisture in the surrounding environment will be measured, that afterwards the mass of water which is solved in the air within the furnace chamber can be calculated.
A further aim for future studies is to improve the heating ramp in such a way that a temperature overshoot does not occur. Therefore, the heating ramp defined in the furnace control unit of 10 K/min will be reduced to a lower value. It may then be possible to remove the workaround of the aluminum enclosure. Further temperature measurements will be conducted afterwards to ensure that the air temperature and the surface temperature are nearly equal.
Further experiments on heat treatment at elevated temperatures (500–550 ∘C) will be carried out in order to be able to make statistically sound statements on the influence of heat treatment at elevated temperatures on the fracture strength of soda–lime silicate glass with the aid of a larger sample size and Weibull analysis. Another objective for future experiments is that heat treatment experiments at lower temperatures beneath 500 ∘C will be performed, because the results presented here indicate that already at lower temperatures (300 ∘C) an increase of the fracture stress can occur. For the different heat treatment temperatures it is also foreseen that different dwell times of the specimens within the furnace at given temperature will be studied.
References
Acknowledgements
Open Access funding provided by Projekt DEAL. Special thanks go to the Institute of Materials Technology in Darmstadt, which provided the experimental apparatus for the investigations presented in Method A. Furthermore, we would like to thank the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation)—Projektnummer 399287305, which provided financial support for this research project.
Author information
Authors and Affiliations
Institute of Structural Mechanics and Design, Technical University of Darmstadt, Darmstadt, Germany
Gregor Schwind, Michael Drass & Jens Schneider
Institute of Materials Technology, Technical University of Darmstadt, Grafenstraße 2, 64283 Darmstadt, Germany
Fabian von Blücher
Corresponding author
Correspondence to Gregor Schwind.
MORE…
Via Marcatutto 7, (Milano) Italy
20080 Albairate MI
Italy
Einsteinring 1
86368 Gersthofen
Germany
Vehmaistenkatu 5
33730 Tampere
Finland
V. alla Porada, 188
20831 Seregno MB
Italy
Industriestraße 21
37688 Beverungen
Germany
Im Vogelsang 18
3340 Waidhofen/Ybbs
Austria
Peter Lisec Straße 1,
3353 Seitenstetten
Austria
Changzhou Xingchen Industry Park
Wujin Qu
Changzhou Shi
Jiangsu Sheng, 213119
China
Via Fieramonti 1
04012 Cisterna di Latina LT
Italy
5 Atir Yeda st.
Kfar Saba 4464305
Israel
3196 Thompson Road
Fenton, MI 48430
United States
100 Schelkovskoye Highway, building 108, room 45
Moscow
Moskva
105523
Russia
Ostendstraße 17
64319 Pfungstadt
Germany
Ctra. Estación Km. 15.8
44415 Rubielos de Mora Teruel
Spain
MORE…
One-of-a-kind dance studio in Marana offers judgment-free space for all ages – KOLD
TUCSON, Ariz. (KOLD News 13) – The stress from the pandemic is not only affecting adults but also kids, and soon there will be a dance studio in Marana for kids to exercise and express themselves.
Two dance coaches from Marana High School, Maya Alexander and Madison Tweedy, are opening Southern Arizona Spirit Squad, SASS, on the northwest side. The studio is located at 8567 N. Silverbell Road above Snap Fitness.
Alexander said SASS will cater to dancers who are training for high school or college dance teams, as well as dancers of all ages who want to “burn off some steam.”
“We really just want to be a welcoming and supportive and judgment-free zone. We feel like this is a great way for kids to get that energy out, get their workout in, and also just have fun with their friends dancing around,” Alexander said.
Alexander said the studio will offer a variety of classes, but the main focus is pom. She said pom dance is the type of dancing you see from high school or college dance teams, like the Arizona pomline at the University of Arizona.
“There isn’t anything like this here in southern Arizona,” Alexander said. “Before opening this studio, dancers would drive to Scottsdale to train.”
With gas prices so high, Alexander said the studio could really help families here in southern Arizona. She said the coach duo knew there was a need for a pom studio in southern Arizona, but says dancing really helps kids mentally.
In fact, the CDC says dance is great for our brains and mental health. Sticking to a regular workout plan can be tough, but dancing is a great option. Studies show rhythm, balance and music help areas of the brain that control memory and planning.
On top of the mental benefits, Alexander said it can be fun.
The studio will have its grand opening on Saturday, Aug. 8, from 5 p.m. to 8 p.m. in the parking lot.
They’ve been doing free classes free public all week long, and on Saturday, food, music and dancing will take place in the parking lot.
Copyright 2022 KOLD News 13. All rights reserved.
LG Tone Free Fit (TF8) Review – PCMag
Durable and highly customizable earbuds for the gym, with a neat Bluetooth trick
I’ve been a contributing editor for PCMag since 2011. Before that, I was PCMag’s lead audio analyst from 2006 to 2011. Even though I’m a freelancer now, PCMag has been my home for well over a decade, and audio gear reviews are still my primary focus. Prior to my career in reviewing tech, I worked as an audio engineer—my love of recording audio eventually led me to writing about audio gear.
The waterproof LG Tone Free Fit (TF8) true wireless earphones deliver laudable audio performance and their charging case lets you transmit audio from wired 3.5mm sources over Bluetooth.
LG’s Tone Free Fit earbuds ($199), also known as the TF8 or TF8Q, join the Tone Free T90 ($229) as the latest entries in the company’s noise-cancelling true wireless earphone lineup. They deliver strong audio, are surprisingly customizable via a companion app, and offer decent active noise cancellation (ANC). Notably, they eschew all the gimmicky spatial audio features of the pricier T90 in favor of a fully waterproof design, which is easily worth the trade-off in our book. Ultimately, the $199.99 Jabra Elite 7 Pro earphones remain our Editors’ Choice winner in the high-end exercise-friendly segment, with more effective noise cancellation, slightly better mics, and a more pleasing default sound. The TF8 in-ears are a strong alternative, however, with better dust protection, a more granular app experience, and a charging case that converts wired audio to Bluetooth.
Available in black with green accents, the TF8 earpieces are chunky but lightweight. Silicone ear hooks ensure a secure, comfortable fit even during vigorous exercise. The earbuds ship with three pairs of “medical grade silicone” eartips in small, medium, and large sizes, as well as three sizes of removable ear hooks.
Internally, 6mm dynamic drivers deliver the audio. The earphones are compatible with Bluetooth 5.3, plus support the AAC and SBC codecs, but not AptX. That last omission makes these a tougher recommendation for Android users.
The capacitive touch panels on the outside of each earpiece are easy to operate—in-ear audio prompts accompany each tap and provide useful feedback. The default control layout is sensible: Tap once on either earbud to control playback or answer a call; tap twice to turn the volume down (left) or up (right); and tap three times on either earpiece to skip forward a track. Finally, press and hold to toggle between ANC and Ambient settings. Notably, the companion app lets you add an option to the touch control selections to turn off both the ANC and Ambient modes, as well as remove any of the existing options. You can also set the triple tap gesture on the left earbud to go backward one track, a function LG oddly leaves off by default.
An IP67 rating is excellent, and rare to see for ANC true wireless in-ears. The first digit in the rating (6) means the earpieces are dustproof, while the second digit (7) means you can submerge them at depths of up to a meter (3.3 ft) for as long as 30 minutes without issue. The pair can also withstand modest water pressure from any direction, so you don’t need to worry about them breaking after a sweaty workout, a dunk in the sink for cleaning, or a rain shower. The aforementioned Jabra Elite 7 Pro and Jabra Elite 7 Active ($179.99) earphones offer close to the same durability with IP57 ratings, but the LG model still has the upper hand. That rating doesn’t apply to the charging case, however, so make sure to fully dry the earpieces before docking them.
The oval charging case features a grip-friendly, textured exterior and opens like a clamshell. Two status LEDs sit on the front: One shows the battery life and the other turns blue when the internal UVnano feature is active. LG says the latter uses ultraviolet beams to fight bacteria on the eartips, though we can’t confirm this claim. A USB-C port resides on the back for the USB-C-to-USB-A charging cable, as well as for the USB-C-to-3.5mm audio cable (both are included). With the 3.5mm cable, you can use the case as a Bluetooth transmitter. In testing, it took us only a few seconds to start streaming audio from an iMac after we connected the case to it. This feature is useful for any non-wireless audio source that has a 3.5mm output.
LG estimates that the earphones can last roughly 10 hours per charge (with ANC off) and that the case holds an additional 20 hours of charge (again, with ANC off). This battery life is particularly strong, though your results will vary based on your typical listening volume and use of ANC.
We tested a beta version of the Tone Free app (available for Android and iOS). Beyond the standard features—you can install firmware updates, adjust the on-ear controls, and access a user manual—you get two customizable EQ presets with eight bands between 64Hz and 8kHz. Meridian audio presets are also present, but we’re not fans of their heavy-handed approach. Mixing and mastering engineers work very hard to make sure audio sounds its best on a variety of platforms, and these presets mask the true sound. Of course, hardly any earphones provide a truly accurate audio experience, but the Meridian presets take you far away from that standard. Keep things simple: Either subtly tweak one of the custom EQ presets or leave everything off altogether.
Otherwise, the app offers on-screen controls for the ANC and Ambient modes—you can toggle both settings, as well as switch between the two Ambient presets (a default option and one that focuses on voices). You can also enable multipoint pairing and toggle the auto-play/pause setting. The Find My Earbuds feature and a low-latency Game Mode round out the experience.
The TF8 in-ears aren’t a standout in the noise cancellation department, but they’re still competent for the price. They dial back powerful low-frequency rumble (like you hear on an airplane) to an extent, but not nearly as well as the top-tier Sony WF-1000XM4 earphones ($279.99). In testing they cut back the lows and mids from a recording of a busy restaurant with clanging dishes and boisterous conversation to a degree, but plenty of the highs—along with some audible high-frequency hiss—passed through. In the same scenario, the Sony earphones are more effective against all the frequencies (particularly the lows and mids), and they add far less hiss to the mix.
As for the Ambient modes, both let in natural-sounding environmental nose without needing to remove the earpieces. The voice-focused mode is clearly better for conversations.
The app defaults to the Meridian Bass Boost EQ preset, but you can choose between Immersive, Natural, Bass Boost, Treble Boost, or 3D Sound Stage presets, too. The first and last choices add obvious spatial effects and we recommend leaving them off. But we also think you should turn off the Bass Boost mode—it’s an odd choice for a default setting, and the two Custom EQ presets start you off at a more neutral place; you can leave the audio signature alone or make adjustments to taste with these custom presets.
With no adjustments to the standard custom EQ profile, the in-ears pack some serious bass punch. On tracks with intense sub-bass content, like The Knife’s “Silent Shout,” the pair delivers strong low-frequency response. At top volume levels, no distortion is present, and at more moderate volume levels, the lows still sound robust.
Bill Callahan’s “Drover,” a track with far less deep bass in the mix, better reveals the sound signature. The drums on this track sound natural and full in the Custom EQ mode (with no adjustments)—they are neither bass-boosted nor thin. Callahan’s vocals have a solid low-mid presence, while the high-mids and highs lend the vocals some additional definition. Meanwhile, the higher-register percussive hits and acoustic strums sound bright and detailed. Adding in a little (or a lot) of bass in the EQ gives the drums and vocals more low-frequency weight than they need but, if you like that sort of audio signature, you can certainly tune the earphones toward that sound. And, of course, the Meridian settings are there to try; they are equally harmless whether you like them or hate them. One important note: The Meridian presets pump up the volume quite a bit compared with the Custom EQ settings. Be careful when you switch modes so the volume change doesn’t catch you off guard.
On Jay-Z and Kanye West’s “No Church in the Wild,” the kick drum loop receives an ideal high-mid presence, allowing it to retain its punchy attack, while the background vinyl crackle and hiss step forward in the mix. The sub-bass synth hits that punctuate the beat come across with solid depth, too. These elements exhibit some modest rumble, but not to an overwhelming degree. Boosting the bass in the EQ or switching to the Bass Boost option fattens up the drum loop, but has a far less obvious impact on the sub-bass synth hits—the drivers can’t quite reach down to thunderous depths like many competing models. Most people won’t find fault with the bass response in any case. The vocals on this track sound clear, though perhaps with a hint of sibilance.
Orchestral tracks, like the opening scene from John Adams’ The Gospel According to the Other Mary, sound bright and detailed, with some pleasant low-frequency anchoring. The focus is squarely on the higher-register instrumentation, but the track still sounds full and not overly bright.
The mic array works fine, and we had no trouble understanding every word from a test recording on an iPhone. We noticed some occasional Bluetooth artifacts, but the signal still sounds stronger than that of most true wireless models. You shouldn’t have any issues with call clarity.
The LG TF8 earbuds offer robust audio performance and are tough enough to survive almost any scenario. We particularly like the companion app, which has enough features to help you tailor the experience, but not too many that they overwhelm. Compared with LG’s other recent true wireless earbuds, the T90, the TF8 are slightly more affordable, better for exercise, and free from gimmicky head-tracking and spatial audio features. Jabra’s Elite 7 Pro ultimately remain our Editors’ Choice winner for the premium exercise earphones category because of its more effective ANC and pleasing default sound quality, though we can’t deny the LG T8 pair’s strong app experience and superior dust protection.
Sign up for Lab Report to get the latest reviews and top product advice delivered right to your inbox.
This newsletter may contain advertising, deals, or affiliate links. Subscribing to a newsletter indicates your consent to our Terms of Use and Privacy Policy. You may unsubscribe from the newsletters at any time.
Your subscription has been confirmed. Keep an eye on your inbox!
Advertisement
I’ve been a contributing editor for PCMag since 2011. Before that, I was PCMag’s lead audio analyst from 2006 to 2011. Even though I’m a freelancer now, PCMag has been my home for well over a decade, and audio gear reviews are still my primary focus. Prior to my career in reviewing tech, I worked as an audio engineer—my love of recording audio eventually led me to writing about audio gear.
Read Tim’s full bio
PCMag.com is a leading authority on technology, delivering lab-based, independent reviews of the latest products and services. Our expert industry analysis and practical solutions help you make better buying decisions and get more from technology.
© 1996-2022 Ziff Davis. PCMag Digital Group
PCMag, PCMag.com and PC Magazine are among the federally registered trademarks of Ziff Davis and may not be used by third parties without explicit permission. The display of third-party trademarks and trade names on this site does not necessarily indicate any affiliation or the endorsement of PCMag. If you click an affiliate link and buy a product or service, we may be paid a fee by that merchant.
Brooks-Park Property: A ‘Cathedral’ in Crisis – East Hampton Star
The effort to preserve and restore the Springs house and studios of the Abstract Expressionist artists James Brooks and Charlotte Park took on new urgency this week when a consultant told the East Hampton Town Board that the 1,318-square-foot Brooks studio, called by one advocate of its preservation “a cathedral to midcentury abstract art,” was beginning to collapse.
But the building’s foundation is in fine condition, Drew Bennett told the board, and the preservation of the studio, one of four structures on the 11-acre Neck Path property, would more likely be a reconstruction than a restoration. The distinction could determine whether community preservation fund money could be allocated to the project.
The site also includes the married artists’ 1,539-square-foot residence, Park’s studio, and a cottage, the latter two less than 200 square feet each.
The town acquired the property in 2013 using $1.1 million from the community preservation fund with a plan to demolish the structures. The purchase was meant to create open space, but a group of Springs residents lobbied for preserving the buildings instead.
The town’s 2014 historic landmark designation allowed for C.P.F. money to be spent toward the site’s restoration, but not for its management. In 2018, the town board approved a management and stewardship plan for C.P.F.-acquired properties.
The following year, however, the property-management committee concluded that the buildings were deteriorated and damaged by vandalism, the cost of their restoration prohibitive. It recommended demolition, and the architectural review board approved a demolition permit in January 2020. That spurred a renewed push for a not-for-profit entity to manage the property.
A committee that formed to develop the management and maintenance plan issued a final draft to the town in December. In February, the committee launched a website for the Brooks-Park Arts and Nature Center.
Earlier this year, the National Trust for Historic Preservation included the site as one of the 11 most endangered historical places in the United States, and the Preservation League of New York State named the structures to its 2022-23 “Seven to Save” list.
But vandalism and weather have caused further deterioration of the buildings, particularly the Brooks studio, prompting some members of the board to urge immediate action on Tuesday.
Mr. Bennett conducted a condition assessment of the structures in 2016, though no subsequent action was taken. He performed a follow-up assessment in February. The availability of C.P.F. funding and the condition of the buildings “are two very important things we need to discuss,” he said.
In the six years between assessments, the buildings have been “very badly vandalized,” he said, with every window and door broken. There is a hole in the roof of the residence. Water has infiltrated the Brooks studio, causing mold and mildew. Worse, the I-beam that supported its sawtooth roof “has basically dropped,” he said. “The main part of the studio is now beginning to twist and slowly collapse.” Much of the wood has decayed.
In his judgment, Mr. Bennett said, “you have to basically take it down, take out the contents you can save, and put it back together. This describes reconstruction, as opposed to restoration.” The studio, he wrote in a memorandum to the board, “needs to be demolished and removed from the program or demolished and reconstructed historically accurate or replaced with a more modern and useful building to the program.”
Also to be considered: If the studio were reconstructed as a place of assembly, it may require fire sprinklers, and public water is not available. As a public space, the buildings, hundreds of feet off Neck Path, would likely require a paved fire access road with turnaround. Parking spaces would be required. The studio’s siding is Transite and known to contain asbestos.
The C.P.F. can fund restoration and rehabilitation of historic structures provided it preserves a cultural property consistent with accepted standards for historic preservation and the structures have a useful life of greater than five years.
“We need to figure out what we’re going to preserve, and what the end use is going to be,” Mr. Bennett said.
Based on a preliminary assessment, “C.P.F. would not fund for adaptive use of the property,” he said. “C.P.F. most likely would not fund most of the site work. . . . It appears C.P.F. guidelines would not fund reconstruction,” an important consideration if the Brooks studio is to be saved. “If you have to take it down and put it back, most people would say that’s reconstruction.” And the costs of reconstructing the studio, “if that’s the right word, are substantial.”
He presented a preliminary cost estimate for two scenarios. If all four structures are to be restored, with the Brooks studio reconstructed, the total cost could be $3.857 million. That would include $1.554 for the Brooks studio. Of the total, the C.P.F. might fund $1.31 million. Should the Brooks studio be demolished, the project’s overall cost might be $2.086 million, with $1.45 million eligible for C.P.F. funding, Mr. Bennett said.
Demolition is unthinkable, several advocates told the board. Janet Jennings, a member of the Brooks-Park Arts and Nature Center committee, called the Brooks studio “the jewel of this property” and “the main premise of our whole center.” She asked that the town seek a second opinion from a firm specializing in historic building assessment to determine if the structure is salvageable.
She noted that a field observation by Michael Devonshire, director of conservation at the architecture firm Jan Hird Pokorny Associates, “came to a different conclusion than the Bennett report,” stating that “the condition is reversible.”
Marietta Gavaris, also of the committee, said that the state and national preservation groups’ recognition “clearly underscores and elevates the importance of the site.” The “esteemed institutions feel that . . . all four structures on the site are an important part of this preservation proclamation.”
John Mullen, a founder of the Brooks-Park preservation effort, in addition to calling the Brooks studio “a cathedral to midcentury abstract art” that must be reconstructed, said the site “has great potential for reinforcing the art focus of East Hampton, and Springs especially. Springs is a place that is the center of midcentury modern abstract art. And Brooks and Park were a major part of that.”
“The fundamental question is obviously funding,” Supervisor Peter Van Scoyoc said. The question as to what is an acceptable C.P.F. expenditure “is somewhat open to interpretation,” and Assemblyman Fred W. Thiele Jr. “has expressed an interest in convening a group to guide the town on these questions.” He said that he will seek clarification on C.P.F. funding and other sources of town money. Money could also be raised privately.
Councilwoman Sylvia Overby, referring to the numerous Abstract Expressionist artists who made Springs their home, called the movement “a part of the history of the town, so it’s very important we keep this history. . . . I would like to move forward before we get too far down the road of the buildings collapsing.”
If the project is not eligible for C.P.F. money, the town has to find money to fund the project now, she said.
Councilwoman Kathee Burke-Gonzalez agreed, and asked for a meeting with the Brooks-Park Arts and Nature Center committee. Ms. Jennings agreed to schedule that meeting.
Thank you for reading . . .
…Your support for The East Hampton Star helps us deliver the news, arts, and community information you need. Whether you are an online subscriber, get the paper in the mail, delivered to your door in Manhattan, or are just passing through, every reader counts. We value you for being part of The Star family.
Your subscription to The Star does more than get you great arts, news, sports, and outdoors stories. It makes everything we do possible.
Copyright © 1996-2022 The East Hampton Star. All rights reserved.
Roblox to stream a full season of Spin Master's Bakugan: Battle Planet – Kidscreen
As the metaverse business continues to establish itself, Spin Master and Roblox are planting their flag there with a major first for both brands.
Starting today, Roblox is rolling out the first season (100 x 11 minutes) of Bakugan: Battle Planet, the latest series based on Spin Master’s popular anime franchise. Four to six episodes will drop every week through Spin’s Bakugan hub (pictured) on the platform.
This marks the first time that a complete season of a TV series will be available to stream on Roblox, according to Spin Master, which last year released a single episode of Battle Planet and attracted 2.7 million users on the platform ahead of season three’s Netflix premiere.
Streaming TV content on Roblox is one step further toward the seamless integration of kids entertainment content, keeping these fans in one place while offering different channels of engagement. But challenges are starting to emerge, illustrated this week by Roblox’s lawsuit against Hong Kong-based toyco WowWee for alleged misuse of its proprietary IP.
Spin Master is continuing to push its brands out into new distribution channels. Today, it was announced that PAW Patrol is heading to the library of audio player Yoto, where young kids can listen to stories alongside physical cards that function like audiobooks. Two PAW Patrol cards will go on sale August 11, each containing seven licensed stories that represent 40 minutes of total play time.
Spin is also gearing up to launch six Bakugan-branded digital Roblox gift cards that will hit retail in September. The cards unlock special content such as access to new Bakugan characters on the platform, as well as a “Genesis Dragonoid” piece of virtual apparel that can be worn in other Roblox hubs.
This is just some random content to show the different layouts possible
™ Kidscreen is a trademark of Brunico Communications Ltd. Site copyright © 1996-2022
Kidscreen title, tagline and logo are trademarks of, and the events are produced by Brunico Marketing Inc.
View our privacy policy
Brian Murphy: An ode to Vin Scully, baseball's vocal essayist and master of the moment – Sports Illustrated
© Robert Hanashiro-USA TODAY Sports
A broadcaster who may be remembered more for what he didn’t say as drama unfolded than the iconic calls that defined his incredible 67-year career.
The Vin Scully tributes trickled in late Tuesday after the Dodgers broke the solemn news that their great orator and the finest conversationalist baseball has ever known had died at 94.
By Wednesday morning, a heartfelt torrent cascaded across social media as the sport reminisced about the silky storyteller who narrated decades of baseball’s biggest moments. A soothing and familiar voice for generations of L.A. fans and beyond who watched or listened to history unfold with Vin in the room.
No other broadcaster commanded the room longer or with a defter touch than the kid who grew up playing stickball on the streets of the Bronx and grew into the folksy gentleman of Southern California who earned his graceful place on the national stage.
Scully’s voice connects the dots of life and can transform millions back in time to the joy and wonderment of something incredible unfolding. The great conductor of unscripted entertainment for seven decades.
From Jackie Robinson to Clayton Kershaw, Sandy Koufax and Hank Aaron to Kirk Gibson and Mookie Wilson, Scully was at the mic to chronicle their heroics. Not to mention Jack Nicklaus triumphing at the 1975 Masters. Or Joe Montana-to-Dwight Clark in 1982, “The Catch” that launched a San Francisco 49ers dynasty.
He belonged to Dodgers fans, but Scully became everyone’s baseball soundtrack as NBC’s lead play-by-play man during the 1980s.
Scully, just 25, was the youngest announcer to call a World Series in 1953. He went on to broadcast 25 Fall Classics, along with 12 All-Star Games, 18 no-hitters and three perfect games.
His radio description of Koufax’s perfection in September 1965 against the Chicago Cubs – from the left-hander’s “loneliest walk” to the mound in the ninth inning, to wiping sweat from his brow and hitching up his pants — is a master class in painting a picture and building tension with every close pitch.
“There’s 29,000 people in the ballpark and a million butterflies,” Scully said, adding later: “A lot of people in the ballpark now are starting to see the pitches with their hearts.”
After Koufax struck out Harvey Kuenn for the 27th out, Scully stayed silent for half a minute as the crowd roared, interrupting the celebration only to mark the milestone.
“On the scoreboard in right field it is 9:46 p.m. in the City of Angels, Los Angeles, California.”
See, Scully was an essayist as much as an announcer, his feel for the game and moment unrivaled during any era, in any booth, on any network.
On April 8, 1974, Aaron was mobbed at home plate by his Atlanta Braves teammates after surpassing Babe Ruth with his 715th career home run off the Dodgers’ Al Downing.
“What a marvelous moment for baseball. What a marvelous moment for Atlanta and the state of Georgia. What a marvelous moment for the country and the world,” Scully called.
“A Black man is getting a standing ovation in the Deep South for breaking a record of an all-time baseball idol. And it is a great moment for all of us, and particularly for Henry Aaron.”
Scully mastered everyday vocabulary and poetically mixed it with keen observation. A broadcaster who may be remembered more for what he didn’t say as drama unfolded than the iconic calls that defined his incredible 67-year career.
In the 10th inning of an exhausting Game 6 of the 1986 World Series, Scully captured the mood perfectly – “Do you believe this ballgame at Shea?” — as the Mets staged an incredible two-out comeback which culminated with the “little roller” heard ’round the world.
Boston Red Sox first baseman Bill Buckner limped over to make a play on Mookie Wilson’s weak grounder only to have it slip through his legs for an epic error that daggered New England baseball fans for years.
“Little roller up along first … behind the bag!” he exclaimed. “It gets through Buckner! Here comes (Ray) Knight, and the Mets win it!”
As Queens erupted in disbelief, Scully did not utter a single word for three minutes as the cameras told the story.
“If one picture is worth a thousand words, you have seen about a million words, but more than that, you have seen an absolutely bizarre finish to Game 6 of the 1986 World Series,” Scully said. “The Mets are not only alive, they are well, and they will play the Red Sox in Game 7 tomorrow.”
None of today’s shtick-obsessed blowhards could pull off brevity without busting a brain gasket.
Two years later, Scully was back in the NBC booth for Game 1 of the World Series when Gibson hobbled to the plate to pinch hit with two outs in the bottom of the ninth and the Dodgers trailing the Oakland A’s and dominant closer Dennis Eckersley by a run.
One Roy Hobbs swing later …
“High flyball into right field, she i-i-i-is … gone!” Scully said.
More pandemonium. More silence from Scully. For 65 seconds, letting the scene at Dodger Stadium breathe instead of stomping on it with hyperbole.
“In a year that has been so improbable, the impossible has happened.”
Another half-minute of silence before Eckersley’s reaction was cued up on replay.
“Look at Eckersley,” Scully said, “shocked to his toes.”
Few folks outside of Detroit remember that was not the first time Scully elevated Gibson’s World Series heroics to Paul Bunyon heights. This 12-year-old watching every minute in his suburban home will take to the grave Scully’s Oct. 14, 1984, call at old Tiger Stadium.
Gibson had emerged as a superstar that year as the Tigers roared out to an unprecedented 35-5 start and steamrolled their way into a clinching Game 5 that Sunday night against the overmatched San Diego Padres.
Detroit led 5-4 in the bottom of the eighth when Gibson, who had already homered in the game, came up to face Padres flamethrower Goose Gossage with runners at second and third.
“First base open, and they will walk Kirk Gibson I believe; it figures they’ll take the bat right out of Gibson’s hands,” Scully said about San Diego setting up a potential double play.
But Gossage shook his head and told his visiting manager, Dick Williams, that he had owned Gibson when he was closing for the Yankees and wanted a shot at striking him out instead of issuing the slugger a pass.
Months later, the MLB highlight film of the Series revealed a mic’d up Gossage and Detroit manager Sparky Anderson telling Gibson that Gossage didn’t want to walk him.
Scully, of course, was not privy to any of that conversation in real time. But he teed up the perfect anecdote to provide context.
“You know, Kirk Gibson made his major-league debut, his very first at bat in the big leagues, against Goose Gossage,” Scully said. “And struck out on three pitches. And, maybe, because of that, Gossage is saying, ‘I can get him.’ Well, we’ll see.”
Two pitches later, Scully yelped, “And there it goes!” as Gibson jacked a three-run homer into the upper deck, sealing the title and sending Tiger Stadium and Michigan living rooms into a tizzy.
Ninety seconds of video showed Gibson and the Tigers celebrating in the dugout before Scully presciently weighed in:
“I have a distinct feeling that Goose Gossage talked Dick Williams out of the intentional walk.
“Saddest words of tongue and pen, what might have been for San Diego, and this crowd in Detroit, delirious!” he said.
Two meaningless outs later, producers cued up Gibson’s home run swing and triumphant trot for the commercial fadeout, allowing Scully to put the bow on a magical season:
“Here’s the story – of the inning, of the game, of the Series of … the … year.”
Vin was there.
Vin was always there.
A very pleasant good evening to you, Vin, wherever you may be. Thanks for letting me pull up a chair and spend part of so many days with you.