ATLANTA, Ga. (CBS46) – It all began with a movie about a peaceful little whitewater rafting trip among best buds in north Georgia’s scenic mountains.
One of the first films made in Georgia, “Deliverance” was based on writer James Dickey’s debut novel of the same name. Released in 1972 and starring Burt Reynolds, Ned Beatty, Ronny Cox and Jon Voight, it was filmed in northeast Georgia communities of Clayton and Rabun County, and became a huge commercial success.
“By 1974, we had built an entire whitewater-rafting industry on the back of ‘Deliverance,’” said state Rep. Ron Stephens (R-Lyons). “The city of Covington was telling us that 75% of their tourism came from people wanting to see where ‘The Dukes of Hazzard’ and ‘In the Heat of the Night’ were made. In Savannah, people wanted to see the park bench in ‘Forrest Gump.’”
“Gov. Jimmy Carter started our office in 1973 because of ‘Deliverance,’” said Lee Thomas, deputy commissioner of the Georgia film music and digital entertainment office. “He realized this is money coming from outside the state and bringing money to a very poor part of the state, and he wanted to figure out how to get more.”
RELATED: Competition from other states increasing pressure on Georgia’s film industry
Reynolds, arguably Hollywood’s most famous leading man of his era, used Georgia in several of his later films, including “The Longest Yard” in 1974; “Gator” in 1976; “Smokey and the Bandit” in 1977; “Cannonball Run” in 1980; “Smokey and the Bandit II” in 1980; and “Sharky’s Machine” in 1981, which was filmed almost exclusively in Atlanta.
As Hollywood film costs began soaring in the 1990s, other nations began passing tax credits to lure film companies outside the U.S. Hollywood and the Motion Picture Association began lobbying Congress to provide financial incentives to spur domestic film production.
In 2004, as part of the American Jobs Creation Act, Congress included an addendum that provided immediate tax write-offs for domestic film production. That spurred states such as Georgia to provide their own tax incentive programs.
The Georgia Entertainment Industry Investment Act was passed by the General Assembly in 2005 and signed by Gov. Sonny Perdue. It provided a 10% tax credit for production companies that spent money in the state. Three years later, that tax credit was increased to 20%, and an additional 10% was tacked on for any film that included the “Made in Georgia” logo in its end credits.
Stephens is one of the few Georgia lawmakers still in office who was a co-signer of the original 2005 tax credit.
“We were in dire straits back in 2008″ before the tax credit was expanded, Stephens recalled. “We were at the height of the great recession, and we desperately needed jobs and investments. At one point, the state only had two days of operating capital.
“To Sonny Perdue’s credit, we convinced enough people to pass the tax credit plan. We had no infrastructure at the time, but we said if we invest and make a film in Georgia, we’ll give you a 20% tax credit. And if you place that Georgia peach at the end of your production, we’ll give you that extra 10%. Now, we’re a $7 billion industry”
By the numbers: Georgia film industry
Assembly Atlanta is a 135-acre mixed-use real estate complex centered around the studio industry at the former site of the General Motors plant in Doraville.
The signature component of the Assembly Atlanta development is the 43-acre Assembly Studios complex featuring soundstages, production offices, warehouse and mill buildings, studio bungalows, event space, and a parking deck. The new facilities will include multiple soundstages, production office space, warehouses and mill space, as well as parking and other necessary amenities.
Next to the Assembly Studios complex is Third Rail Studios, a movie and television production facility spanning seven acres that opened in 2016 and that Gray acquired in September 2021.
Copyright 2022 WGCL. All rights reserved.
Burt Reynolds, ‘Deliverance’ put Georgia on the film industry’s map – CBS 46 News
Homeless are entering former Topeka hotel property, neighbor says – The Topeka Capital-Journal
A Denver-based real estate firm that plans to build high-rise apartments in Topeka went about three weeks without its license to do business in Kansas, though that’s now been restored.
That firm, Flywheel Fairlawn, LLC, forfeited its license effective July 15 because of its failure to file an annual report with the state in a timely manner, said information posted on the state’s Business Entity Database.
The forfeiture came three days after Topeka’s mayor and city council approved $24.5 million in taxable industrial revenue bonds for the company’s project to build high-rise apartments at the site of a former Holiday Inn Holidome at 605 S.W. Fairlawn Road.
Flywheel Fairlawn’s license remained forfeited as recently as Thursday, but had been restored as of Saturday, the business entity database said.
The Capital-Journal received no response to telephone and email messages it left this past week seeking a response from Denver-based Flywheel Capital, LLC, the parent company for Flywheel Fairlawn, LLC.
Topeka’s city government, which has not yet committed to issuing the bonds for the project at the site of the former Holiday Inn Holidome, was aware of what happened to Flywheel Fairlawn, city communications director Gretchen Spiker confirmed Thursday.
At that point, the license hadn’t yet been restored.
“The city has been in contact with Flywheel Fairlawn, LLC, and is reviewing its options,” Spiker told The Capital-Journal. “The city wants the community to know there is no liability to the city for the Industrial Revenue Bonds.”
Meanwhile, psychotherapist Sarah Bremer Parks, co-owner of a nearby business and building at 5315 S.W. 7th, told the Capital-Journal Thursday that Flywheel Fairlawn wasn’t maintaining the former Holidome property at 605 S.W. Fairlawn Road.
“There’s homeless people in there now,” she said.
Hotels had been operated on the property for decades before Topeka’s mayor and city council learned at a meeting in September 2020 that the property had recently been vacated.
They voted that evening to change zoning to enable Flywheel Fairlawn to use that property to provide “market rate, workforce housing” for 130 to 140 dwelling units of studio, one-bedroom and two-bedroom apartments.
The Denver Post reported in October 2021 one of the 50% partners in Flywheel Capital, Adam Hazlett, had filed a lawsuit against the other, Ben Hrouda, alleging he misappropriated investor funds and filed fraudulent tax returns.
Hrouda was then among those on hand as Topeka’s mayor and council voted in November 2021 to issue $10 million in Industrial Revenue Bonds to help investors finance Flywheel Fairlawn’s Topeka development, named “Fairlawn Acres.”
In exchange for the bonds’ issuance, Flywheel Fairlawn agreed to limit the monthly base rental rate to $550 for studio apartments and to $775 for one-bedroom units, while being allowed to impose increases amounting to as much as 5% annually.
Topeka’s mayor and city council voted July 12 to approve another zoning change and to amend the IRB amount for the development to $24.5 million.
The bond issuance would pose no financial risk for the city. Investors would buy the bonds, which would be paid off using revenues brought in by the project. If the project defaulted, that would become an issue between the developers and the investors.
Flywheel Fairlawn plans to demolish the existing structures “and build two, four-story buildings containing approximately 220 new workforce apartments to meet Topeka’s attainable housing needs,” said a document in the July 12 meeting’s agenda packet.
“The project will cost approximately $24.5 million and will take 15 months to complete,” the document said. “The project will include a top-of-the-market amenity package such as lounge, fitness center and laundry. This project will revitalize a vacant building while providing much needed quality housing in Topeka.”
Flywheel Fairlawn’s license to do business in Kansas was forfeited three days later, on July 15, according to the state.
“The city of Topeka was made aware of the issues with the LLC’s status during its standard review process,” Spiker said Thursday. “This review process is part of the city’s due diligence before signing a performance agreement, which is a condition of the bond issue.”
The city has not yet entered into a performance agreement with Flywheel Fairlawn for the project, she said.
“The city can refuse to sign the agreement and proceed with bond issuance until the company has corrected the issue,” Spiker said Thursday.
A records check conducted two days later showed Flywheel Fairlawn’s license had been restored.
Meanwhile, Sarah Bremer Parks said Thursday that nobody has been taking care of the property since its former live-in manager, Michael Grant, moved away at least three months ago.
Parks said she works in private practice with her husband, Peter Parks, out of the building they co-own near the site of the proposed high-rise.
She keeps an eye on the former Holidome property, where she said people can easily gain entry and the doors to the buildings are unlocked.
“There are homeless people coming and going despite a fence that was put up about a month ago,” Parks said. “The fence is not secured and does not keep anyone out at all.”
A hole could be seen in that fence this past week.
The city doesn’t have any comment at this time about Parks’ assertions regarding the access and upkeep of the property, Spiker said.
Tim Hrenchir can be reached at [email protected] or 785-213-5934.
Genndy Tartakovsky Didn't Take Recasting Samurai Jack's Aku Lightly – /Film
“Samurai Jack” has widely been lauded as one of Genndy Tartakovsky’s most significant works, with the Cartoon Network show delivering a fun five-season run filled with incredible animation. Not only that, but the show managed to provide a satisfying conclusion even after ending its original run in 2004. The show would return in 2017 for its final season, giving a definitive conclusion to the story of Samurai Jack and his goal to get back to the past and save his people from the demon Aku. There was only one major drawback to returning to the show after such a long time: the loss of a legendary actor.
Makoto Iwamatsu, known professionally as Mako, voiced Aku during “Samurai Jack’s” original 52-episode run. The actor, unfortunately, passed away in 2006 from esophageal cancer, two years after the show first ended in 2004. When it was time for “Samurai Jack” to make its triumphant return, with fewer restrictions and a new life on Adult Swim, creator Genndy Tartakovsky had a hard decision to make. Aku was the central villain in the series, after all. Many theories circulated around how Tartakovsky would approach the character of Aku moving forward. Tartakovsky, of course, would find the process incredibly difficult.
In an interview with the Verge, Genndy Tartakovsky talked about handling the character of Aku with his voice actor gone:
“It was hard. For a while, I thought we should reimagine Aku with a different voice, perhaps even use a different character. But then I realized I love Aku too much, so we auditioned a few people, and Greg [Baldwin] really did the best job. Honestly, nobody can replace Mako, he was that special, that unique, especially the performance he made for Aku. But Greg did really well.”
Tartakovsky ended up recasting the role, although replacing Aku with another antagonist altogether was considered. However, scrapping the character of Aku would completely change the series. “Samurai Jack” always had Aku at the center of Jack’s problems, and Jack defeating Aku when he returned to the past was the whole point of the show. Getting rid of the character of Aku would have significantly shifted the trajectory of the show and Jack’s character compared to where they were when it first ended. Luckily, Tartakovsky found a good balance of respect for Mako, who initially voiced Aku, recasting the role with an actor who brought a unique performance that harkens back to Mako’s original work on the character.
Greg Baldwin’s work as Aku didn’t just get Tartakovsky’s seal of approval but also that of Mako’s family, as Tartakovsky recounts a story in the same interview about Mako’s extended family visiting the studio one day.
“On the last episode, Mako’s daughter and grandson came by, and they watched him record, and they were crying. It was really amazing, because they heard the voice of their dad and grandfather.”
Greg Baldwin being able to recapture the spirit of what Mako did with his original voice performance is a beautiful thing. It wasn’t a decision that the “Samurai Jack” creator took lightly, as the detail-oriented creator considered many different avenues while bringing Samurai Jack back for its fifth season. The final 10 episodes, which are available to stream along with the rest of the series on HBO Max, serve as a great conclusion to the series. Although Mako could not be a part of the final season, his presence is still there in spirit, thanks to the character of Aku.
Blackstone sells five South Florida budget hotels for $61M – The Real Deal
For full functionality of this site it is necessary to enable JavaScript. Please Allow Javascript and reload this page.
G6 Hospitality CEO Rob Palleschi and the Motel 6 at 825 East Dania Beach Boulevard (LinkedIn, Google Maps)
Blackstone sold off a quintet of budget hotels in South Florida for $61 million as part of an eight-property portfolio deal in the Sunshine State.
Affiliates of Georgia-based Global Hotel Group bought three Motel 6 properties in Cutler Bay, Dania Beach and Fort Lauderdale, as well as two Studio 6 extended-stay hotels in Coral Springs and West Palm Beach, records show.
The five properties traded hands as part of a larger $279.4 million deal that also includes Global Hotel Group picking up four Motel 6 locations in Orlando and the refinancing of two hotels it already owns in Lakeland and Miami, according to published reports. Global Hotel Group, led by CEO Sam Patel, obtained a $180.8 million mortgage from Starwood Mortgage Property.
The seller is G6 Hospitality, Blackstone’s Texas-based operator of the Motel 6 and Studio 6 budget hotel chains, which the investment giant acquired in 2012. Last year, G6 scored a $685 million loan from Goldman Sachs and JPMorgan to refinance more than 100 Motel 6 and Studio 6 properties across the country. In Cutler Bay, Global Hotel Group paid $10.7 million or $69,480 per key for the 154-room Motel 6 at 10775 Caribbean Boulevard that G6 acquired for $6 million in 2009. The hotel was completed in 1979.
In Dania Beach, Global Hotel Group paid $12.7 million, or $77,914 per key for the Motel 6 at 825 East Dania Beach Boulevard, which G6 paid $5.8 million for in 2012. The 163-room property was built in 1982.
In Fort Lauderdale, Global Hotel Group paid $12.1 million for the Motel 6 at 1801 State Road 84 that G6 acquired for $4 million in 2008. The deal broke down to $114,150 per key for the 106-room hotel completed in 1973.
As for the two Studio 6 properties, Global Hotel paid $14.6 million for the hotel at 5645 University Drive in Coral Springs and $10.8 million for the one at 1535 Centrepark Drive North in West Palm Beach. G6 had paid $6 million in 1998 for the Coral Springs hotel, which was completed the same year, and $7.8 million in 2012 for the West Palm Beach site that was built in 1998.
Blackstone, which is reportedly eyeing a $1 billion sale of G6, has offloaded other pieces of the portfolio in recent weeks, including four Motel 6 locations in the San Francisco Bay Area for $40.3 million last month and one in Los Angeles for $46 million in June.
All rights reserved © 2022 The Real Deal is a registered Trademark of Korangy Publishing Inc.
The Deal’s newsletters give you the latest scoops, fresh headlines, marketing data, and things to know within the industry.
By clicking Subscribe you agree to our Privacy Policy.
Round-up top news and topics for each of the following cities
Select the newsletter you’d like to receive below
Select the newsletter you’d like to receive below
Select the newsletter you’d like to receive below
A multimodal psychological, physiological and behavioural dataset for human emotions in driving tasks | Scientific Data – Nature.com
Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Data volume 9, Article number: 481 (2022)
247
Metrics details
Human emotions are integral to daily tasks, and driving is now a typical daily task. Creating a multi-modal human emotion dataset in driving tasks is an essential step in human emotion studies. we conducted three experiments to collect multimodal psychological, physiological and behavioural dataset for human emotions (PPB-Emo). In Experiment I, 27 participants were recruited, the in-depth interview method was employed to explore the driver’s viewpoints on driving scenarios that induce different emotions. For Experiment II, 409 participants were recruited, a questionnaire survey was conducted to obtain driving scenarios information that induces human drivers to produce specific emotions, and the results were used as the basis for selecting video-audio stimulus materials. In Experiment III, 40 participants were recruited, and the psychological data and physiological data, as well as their behavioural data were collected of all participants in 280 times driving tasks. The PPB-Emo dataset will largely support the analysis of human emotion in driving tasks. Moreover, The PPB-Emo dataset will also benefit human emotion research in other daily tasks.
Human emotions are integral to daily life, and impacts a variety of cognitive abilities1,2. Specifically,they can direct attention to key features of the environment, optimize sensory intake, tune decision making, ready behavioural responses, promote social interaction, and enhance episodic memory3,4. Consequently, human emotions affect different tasks that humans experience every day, such as, learning, sleeping, driving, entertainment. Driving is now a typical daily task5,6. According to the statistical report, the average driving time per person in the world exceeds 1 hour per day7,8, which also is accompanied by serious injuries, fatalities and related costs caused by negative human emotions in driving tasks9,10. For a long time, how to reduce accidents risk caused by emotions through studying human emotions in driving tasks has been an important research topic in many fields such as psychology, physiology, engineering, and ergonomics, and has been extensively studied11,12,13,14,15.
With the advancement of sensing, machine learning, and computing systems, extensively emerging intelligent vehicles have been developed to connect with vehicles, pedestrians, infrastructures, and clouds in the transportation network16,17. Thus, intelligent vehicles have become an intelligent mobile terminal that carries rich functions and services18,19, which not only expand and deepen the scope of human-machine interaction but also provide an emerging and challenging research field to further study human emotions in driving tasks, namely, emotion-aware human-machine interactions20,21. Specifically, emotion-aware human-machine interactions consists of multi-modal emotion detection and regulation, which will enhance the safety of humans in driving tasks, and will also improve their comfort and driving experience22,23. To study the emotion-aware human-machine interactions in driving tasks, cross-disciplinary knowledge is required, including cognitive psychology, brain science, human factors, automotive engineering, and affective computing19,24. The latest technological innovations like wearable devices have boosted the study of emotions, leading to a growing number of studies investigating the positive or negative impact of certain emotions during driving (e.g., anger25, sadness26). In order to measure emotions of human beings, psychological studies have revealed the multi-modal expression of emotion27. Further, affective computing studies have focused on the detection of human emotion states based on different emotional expressions6,28. Moreover, the human-machine-interface like visual and auditory interface could affect the human’s emotions in driving tasks15,29.
To study human emotion in driving tasks, researchers need rich and repeatable datasets30. Over the past decade, researchers have shared multiple human emotion datasets in driving. Table 1 summarizes the datasets that capture information of drivers in the surveyed papers. Although these datasets have contributed to successful support in human emotion studies, there is still a lack of multi-modal datasets (including psychological, physiological and behavioural data) that are dedicated to human emotions research in driving. Thus, creating a multi-modal human emotion dataset in driving is an essential step in emotion-aware human-machine interactions studies. However, as far as we know, there is no publicly available multimodal dataset of human emotions in driving tasks.
Here, we present the multimodal dataset of psychological, behavioural and physiological data for human emotion (PPB-Emo) in driving tasks. As shown in Fig. 1, we conducted three experiments to collect PPB-Emo dataset. In Experiment I, 27 participants were recruited, the in-depth interview method was employed to explore the driver’s viewpoints on driving scenarios that induce different emotions, and the results were used to develop a questionnaire. For Experiment II, 409 participants were recruited, a questionnaire survey was conducted to obtain driving scenarios information that induces human drivers to produce specific emotions, and the results were used as the basis for selecting video-audio stimulus materials. Experiment III used the video-audio clips selected in Experiment I and Experiment II as the stimulus materials for human driver’s emotion induction. In Experiment III, 40 participants were recruited, and the psychological data (self-reported dimensional emotions and discrete emotions, personality traits) and physiological data (EEG), as well as their behavioural data (driving behaviour, facial expressions, body posture, road scenario) were collected of all participants in 280 times driving tasks. The PPB-Emo dataset will largely support the analysis of human emotion-cognition-behaviour-personality in driving tasks, as well as the study in emotion detection algorithms and adaptive emotion regulation strategies. To the best of our knowledge, The PPB-Emo dataset is currently the only publicly available multimodal dataset of human emotions in driving tasks, and the PPB-Emo dataset will also benefit human emotion research in other daily tasks.
Overview of data collection.
This study was carried out under the requirements of the Declaration of Helsinki and the later amendments of it. The content and procedures of this study were noticed and approved by the Ethics Committee of Chongqing University Cancer Hospital(Approval number: 2019223).
The written informed consent were given by all participants before they joined in this study. A statement was informed to the participants that results of this study might be published in academic journals or books. During the experiments, participants were told about the rights they would have in experiments. They were allowed to withdraw at any time during the experiments.
The permissions to make the processed data records known to public were gained from all the participants at the end of the study. Since PPB-Emo is to be open to public access, separate consent was obtained for the disclosure of the data that contains personally identifiable information, which is the facial expression of participants during driving tasks. Additional permission was used to inform them about the data types that would be shared in public and the potential risks of re-identification that might be caused by sharing the date and time of the processed data records. The sharing permissions were given by all participants in this study.
Experiment I focused on the investigation of drivers’ viewpoints on driving scenarios that induce different emotions in humans.
In-depth interviews with 27 participants were conducted. The 27 participants included 6 females (22.22%) and 21 males (77.78%). The age range of the participants was 19–55 years old, with an average age of 36.81 years old (standard deviation (SD) = 9.27). Participants’ driving experience ranged from 1 to 25 years, with an average driving experience of 8.93 years(SD = 6.49). The occupations of the participants include workers, teachers, students, farmers, staffs, civil servants, drivers, etc.
The aim of in-depth interviews was to obtain real-life scenario information that induces different emotions of human drivers and use the results to develop questionnaires. The scenario information collection procedure includes semi-structured interviews with human drivers. The interviews were based on the interview guide method31. All participants first signed the demographic questionnaire, and collected personal and demographic information including age, gender, driving experience, and occupation. Then, through interviews with the participants, the participants answered a set of open-ended questions (e.g., question “Could you share an experience that you felt scared while driving or even when you recalled it?”). During the answering process, the interviewer guided the participants to use their own words to recall and describe driving scenarios that trigger different emotions, including roads, weather and lighting conditions; other road users’ behaviours; events; and other contributing factors (e.g., answer “One time when I was driving on a mountain road at night, there was no one on the road. I felt very sleepy. My eyes closed a little uncontrollably. When I opened my eyes, I found that I was in a sharp bend. I stepped on the brakes. It made me feel scared.”). Each participant answered seven driving scenarios questions corresponding to different emotions. The interview time for each participant was about 30 minutes and the process was recorded.
All audio recording and on-site notes of the in-depth interviews were transcribed verbatim and analyzed using Excel files. First, the original transcripts of the 27 interviewees were broken into complete sentences. Next, the two researchers (1 male and 1 female) with expert knowledge and rich experience in drivers’ emotions analysis evaluated sorted the sentences separately and the main scenario information corresponding to the seven emotions in the statement were determined under the consensus of them. After summarizing, there are eleven kinds of scenarios that induce anger in human drivers; sixteen kinds of scenarios that induce happiness in human drivers; ten kinds of scenarios that make human drivers fear; eleven kinds of scenarios that trigger human drivers to feel disgusted; There are ten kinds of scenarios that cause human drivers to feel surprised; Relatively, few scenarios that trigger sadness and neutral of human drivers are five and six respectively. Table 2 summarizes the top five driving scenarios that induce each emotion according to the number of participants.
Experiment II focuses on obtaining seven driving scenarios that most effectively induce the corresponding emotions of human drivers through questionnaire surveys, as the basis for the selection of video-audio stimulus materials.
409 Chinese participants were recruited from four countries, including China, the United States, Canada, and Singapore. They were asked to complete an online questionnaire, including 146 women (35.61%) and 263 men (64.39%). The age range of the participants is 18–71 years old, and the average age is 31.34 years old (SD = 10.64). Participants’ driving experience ranges from 1–41 years, with an average driving experience of 5.87 years (SD = 6.69).
Because online surveys can avoid geographical restrictions on data collection, and previous studies have also verified the effectiveness of online tools in assessing driving behaviour32,33. Therefore, an online survey was conducted to collect the data in Experiment II. Based on the outcomes of Experiment I, the online questionnaire consists of two parts and a total of ten questions. The first part is the demographic background. There are three questions, including gender, age, and driving experience. The second part is based on the results of Experiment I and developed seven questions for driving scenarios that induce different emotions in human drivers. These questions correspond to seven emotions that need to be investigated. Each question describes five different driving scenarios. These scenario descriptions are derived from the top five more frequently mentioned scenarios in Experiment I. Participants were asked to select the scenarios most likely to induce corresponding emotions from the five scenarios and they can select more than one scenario (up to five) if they want. It takes about 10 minutes to complete the questionnaire.
The professional online survey platform Sojump (www.sojump.com) was used to design and post the questionnaire. Participants’ answers, region, and answer time were automatically recorded. The survey was distributed in the chat groups of social software (WeChat and QQ). To increase the involvement in the survey, participants will receive a reward of five RMB after completing the survey.
Participants reported the corresponding scenarios that easily induce seven kinds of emotion states (anger, fear, disgust, sadness, surprise, happiness and neutral) during driving. Table 3 presents the frequency and percentage of scenarios that easily induce 7 kinds of emotions among the 409 participants. Among them, a total of 344 participants (84.11%) thought that the scenario of “Others keep the high beam on while meeting the car, which affects the vision.” was most likely to induce their anger. 310 participants (75.79%) mentioned “Driving on a mountain road with high cliff beside.” that would make them feel fear. 351 participants (85.82%) felt disgusted when they saw the scenario “The driver in front keeps throwing garbage, water bottles, and spitting out.” A total of 271 participants (66.26%) thought that the scenario of “Witnessing an accident while driving.” was the easiest to make them sad. 307 participants (75.06%) reported that “Seeing some pedestrians walking on the highway.” would make them surprise. Regarding the happiness, 299 participants (73.11%) reported that “Noticing interesting things happened on the road and the scenery outside is very beautiful.” is the easiest to make them happy. The corresponding frequencies of scenarios are shown in Fig. 2. In addition, 273 participants (66.75%) felt neutral when driving while listening to soft music.
Frequency of the corresponding scenarios that easily induce six basic emotions.The x-axis represents the driving scenarios that trigger a specific emotion, such as anger-1 represents that others keep the high beam on while meeting the car, which affects the vision. Table 3 describes the content of each scenario that triggers a specific emotion. The y-axis shows the frequency of 409 participants’ scenario selections in the online questionnaire and each participant can choose up to 5 scenarios.
The emotions of human drivers need to be induced by appropriate stimuli to collect emotion data. Video-audio clips have been proven to reliably trigger the emotions of human driver6,34,35. Based on the results of the questionnaire survey, we manually selected the seven most effective (the highest percentage of participants were selected in each emotional scenario) video-audio clips on the Bilibili website (https://www.bilibili.com/) to induce the corresponding emotions of the human driver in Experiment III. Bilibili is a Chinese video-sharing site where users can upload videos of their lives, and video viewers can tag or add comments to videos through a scrolling commenting system nicknamed “bullet-screen comments”, which will help us evaluate video viewers’ emotional feelings induced by the video-audio clips.
To select the most effective video-audio clips based on the results of the online survey, two research experts (1 male and 1 female) with rich experience in drivers’ emotions analysis evaluated more than 100 video-audio clips. The consensus of the two experts determined the choice of video-audio clips, and finally, 7 videos were selected for Experiment III. Notebaly, in order to make the driver feel more immersive and induce the correct emotion in Experiment III, all the selected video-audio clips in Experiment II were first-perspective of the human driver. Table 4 describes the contents of these seven clips.
The aim of Experiment III is to collect the multimodal psychological, physiological and behavioural dataset for human emotions in driving tasks.
A total of 41 drivers from Chongqing were recruited for this data collection experiment. Among these participants, the data of participant 1 was found incomplete and invalid after the collection process. The reason might due to the unexpected technical problems. Therefore, the data of 40 participants (age range = 19–58 years old, average age = 28.10 years old, SD = 9.47)) were valid in this experiment, including 31 males and 9 females. All participants had a valid driver’s license and had at least one year of driving experience (driving experience range = 1–32 years, average driving experience = 5.58 years, SD = 6.02). All participants had normal/corrected vision and hearing. Their health statuses were reported before the start of the experiment. Participants were suggested to have a regular 24-hour schedule and took no stimulating drugs or alcohol before the experiment. Each participants received a reward of 200 RMB after the experiment.
The multi-modal data collection system used in this experiment mainly includes the psychological data collection module, physiological data collection module, behavioural data collection module, driver emotion induction module, driving scenarios, and data synchronization. Figure 3 shows the setup of the overall multi-modal data collection experiment. The contents of the specific modules are as follows:
Experimental setup of human driver multi-modal emotional data collection. (A) EEG data collection, (B) video data collection, (C) driving behaviour data collection, (D) experiment setup, (E) driver’s emotion induction, (F) psychological data collection. The use of the relevant portraits in Fig. 3 has been authorized by the participants, and the identifiable information has been anonymized with the knowledge of the participants.
In this experiment, three self-reported scales were used to collect psychological data, including self-assessment manikin (SAM), differential emotion scale (DES), Eysenck personality questionnaire (EPQ). SAM36 was used for participants to subjectively annotate their dimensional emotions. Representations of non-verbal graphical were used in SAM to evaluate the level of three dimensions (arousal, valence, and dominance). The 9-point scale (1 = “not at all”, 9 = “extremely”) SAM was used for assessment in the experiment procedure. DES37 was used for participants to subjectively annotate their discrete emotions. DES is a multidimensional self-report scale for human’s emotions assessment, including ten fundamental emotions: sadness, anger, contempt, fear, shame, interest, joy, surprise, disgust, and guilt. In the experiment, the 9-point scale DES (1 = “not at all”, 9 = “extremely”) was chosen as the method to evaluate the intensity of self-reported emotions in each dimension. EPQ38 with a total of 88 questions was used to assess the personality traits of participants in the experiment. EPQ is a multi-dimensional psychological measurement38, which can measure the personality traits of humans, including P-Psychoticism/Socialisation, E-Extraversion/Introversion, N-Neuroticism/Stability, L-Lie/Social Desirability. The experiment used iPad (Apple, Cupertino, USA) for participants’ self-reported emotions during driving.
An EnobioNE (Neuroelectrics, Barcelona, Spain) was used in the experiment to collect participant’s EEG physiological data. EnobioNE is a 32-channel wireless EEG device that uses a neoprene cap to fix the channel at the desired brain location. The electrical activity of the brain was recorded using the EnobioNE-32 system. Dry copper electrodes (coated with a silver layer) fixed on the cap was used to guarantee the good contact with the participant’s scalp. The amplitude resolution of EnobioNE we used was 24 bi (0.05 μV), the sampling rate was 500 Hz, and the band-pass filter was between 2 and 40 Hz. The signal was directly captured by the NIC2 software, and The software contained programs for acquiring and processing signals. During the experiment, the software filtered out electrooculogram (EOG), electromyography (EMG) and electrocardiographic (ECG) signals simultaneously. In addition, the NIC2 software associated the channels with the variable position in the international 10–10 positioning system dynamically. The alpha wave, beta wave, gamma wave, delta wave and theta wave at these positions were directly output to the computer through the NIC2 software.
Before the experiment, the researcher suggested that the participants should wash their hair in advance to avoid the poor contact of the EEG cap electrodes. After the participants put on the device correctly, the contact status of all electrodes in the EnobioNE system was checked and adjusted till a good fit was reached. In addition, a common-mode sensing electrode clamped on the right earlobe was used as a ground reference.
Behavioural data collection module consists of driving behaviour data collection and video data collection. Driver behaviour data was obtained using a fixed-based driving simulator (Realtime Technologies, Ann Arbor, USA). The simulator consists of a half-cab platform and an automatic transmission, providing a 270° field of view. The simulator is equipped with a rear-view mirror with a simulated projection, allowing the driver to monitor the traffic behind. Furthermore, the sound of the engine and ambient is emitted through two speakers. The woofer in the simulator simulates the vibration of the vehicle under the driver’s seat. In addition, the simulator dashboard was an LCD (resolution 1920×720, 60 Hz) screen, which was used to display the speedometer, tachometer and gear position. The data of driver behaviour, road information and vehicle posture generated by operating the driving simulator during the driver’s driving process were synchronized and recorded in real-time in the background of the main control computer.
The video data collection composed of six high-definition cameras. Five RGB cameras and one infrared camera were used in this experiment to collect the driver’s face expression, body gesture and road scenario data. The RGB camera we used was Pro Webcam C920 (Logitech, Newark, USA) with a resolution of 1920×1080 pixels, which collected data at a frame rate of 30 fps. The infrared camera we used was an industrial-grade camera with a resolution of 1080×720 pixels, a lens focal length of 2.9 mm and a shooting angle of 90 degrees without distortion. Data collection was at a frame rate of 30 fps. Six cameras were arranged in the cockpit of the driving simulator, of which three RGB cameras were located in front of the participant’s face at 40° on the left and right sides. These cameras were used to collect facial expression data, and one RGB camera was arranged in the front pillar of the driving simulator to collect the driving posture data of participants, and one RGB camera was arranged at the position of the rear-view mirror of the driving simulator to collect road scenario information during driving. Infrared cameras were placed directly in front of the participants’ faces and were also used to collect facial expression data. In addition, the camera was also used to collect the voice information of the participants during emotional driving. The LiveView software (EVtech, Changsha, China) was used to record video information simultaneously from the six high-definition cameras.
A 20-inch simulator central display (resolution 1280×1024, 60 Hz) was used in the experiment to display video-audio stimulus materials. Stereo Bluetooth speakers (Xiaomi, Shenzhen, China) were used to play audio, and the audio was set to a relatively large volume. Meanwhile, each participant was asked if the volume was comfortable for them to ensure clear hearing volume was adjusted before the experiment. Video-audio stimulus materials selected in Experiment II was used in Experiment III. To ensure that there was no human intervention in the emotion induction of participants during the experiment, the emotion induction system in this experiment was mainly composed of a master computer, a remote display and a remote Bluetooth audio playback device.
In this experiment, two simulated driving scenarios were designed: a formal experimental scenario and a simulated driving practice scenario. The practice scenario setting aims to improve the participants’ control and familiarity with the driving simulator through the practice before the formal experiment. The scenario for practice driving was an 8 km straight section of highway with bidirectional four traffic lanes. The formal experiment scenario is a two-way two-lane straight-line section with a total length of 3 km. The reason for setting these two scenarios is to minimize the requirements of complex driving conditions on the driver’s performance, to show the real multimodal responses elicited by driver emotion to the greatest extent39. Participants were asked to drive in the right lane throughout the experiment, keeping the speed at about 80 km/h. The specific configuration parameters of the two experimental scenarios are shown in Table 5. The entire driving scenario uses SimVista and SimCreator software to build the driving scenarios.
To collect and store all data synchronously, this experiment used the D-lab data collection synchronization platform (Ergoneers, Gewerbering, Germany) to collect data in multiple channels, including EEG, driving behaviour data, video data are recorded synchronously on a common time axis to achieve subsequent synchronous analysis. In addition, D-Lab was also used to manage and control the experiment.
The whole experiment process is divided into three parts: preparation, emotional driving experiments and post-experiment interviews. The overall process is shown in Fig. 4.
Experimental procedure and tasks of Experiment III. (A) Experiment preparation, (B) Multimodal human emotion data collection. (C) Post-experiment interview.
Experiment introduction: After the participants arrive in the waiting room, the participants will be explained the purpose, the duration, and the research significance of this experiment. At the same time, the participants will be informed that the data collection apparatus of this experiment is non-invasive and radiation-free, and apparatus will not have any impact or harm on the participants’ health, and the participate voluntarily of participants will be ensured.
Sign the participant inform consent form: instruct participants to read the “Participant Inform Consent Form”, the researchers will number the participants and register the basic information.
Complete the health form for experiment participants: to check the health of the participants in their daily lives, and whether they have taken psychotropic drugs, cold allergy drugs or alcohol in the past 12 hours. The researchers will evaluate the situation of the participants and see if it is suitable for them to participate in the experiment.
Wear testing apparatus: the researchers help the participants to wear the EEG. After wearing the EEG cap, the researchers will adjust the comfort level to observe whether the electrodes are fit and whether the signal collection is normal.
Simulator practice driving: the researchers will lead the participants to sit in the cockpit and adjust the positions of the seat to a suitable position. Then, the researchers will help the participants to adapt to the speed control of the driving simulator, and remind participants to drive according to the speed signs. In the process of practice driving, the researchers will explain the formal experiment process, steps and attention to the participants in the co-pilot position.
Fill in the driving simulator sickness questionnaire: check whether the participant has any physical discomfort during the driving simulator experiment.
In the formal experiment, participants were asked to complete the driving tasks in seven emotional states (anger, sadness, fear, disgust, surprise, happiness, and neutral), in which the order of emotional induction was randomly selected. After each experiment, a 3-minute emotional cooling period was set up to allow participants to calm down from the previous period of emotions.
Emotion induction: The researcher loads the preset driving scenarios program to the driving simulator, and at the same time randomly plays the video-audio clips to the participants for emotion induction. The participants watch the video-audio stimulus material and try to maintain their emotions while driving.
Emotional driving: After the participant finished watching the emotion induction material, the participant starts emotional driving in D (Driving) gear, and the experimental platform starts recording data simultaneously. Participants were told to keep the speed at around 80 km/h during the emotional driving phase.
Self-reported emotion: After completing a time of emotional driving, participants were required to recall the state of their emotions during their driving scenarios by completing self-assessment of the SAM scale and DES scale questionnaires.
Repeat the above two steps until the participant completes seven emotional driving. After the participant completes the corresponding SAM scale and DES scale, the researcher will record the experiment process.
After completing all the emotional driving experiments, the researcher will help the participants to remove the experimental apparatus from their bodies, and then guided the participants to complete the EPQ questionnaire.
This section discusses the organisation of PPB-Emo dataset in the Figshare40. Table 6 summarizes the data collection of PPB-Emo dataset. After the above data collection, each participant completed 7 simulator driving and data recording. Therefore, for 40 participants, a total of 280 times driving were completed, and the length of each driving was about 135 s. To verify whether the participant experienced the target emotion in certain driving scenario, we carried out the target emotion induction success check.
The DES of each participant was used as the ground truth to verify whether the target emotion was generated by the participant during the emotional driving. The self-reported emotion would be selected as the ground truth when it was not consistent with the target emotion.The outcomes showed that for each emotional driving, namely anger, sadness, fear, disgust, surprise, happiness and neutral driving, 34, 38, 36, 25, 34, 36 and 37 participants were successfully induced into target emotion, respectively. At the same time, we deleted each set of data that was not successfully induced.
The resulting PPB-Emo dataset contains 240 sets of valid multimodal data from 40 participants, totaling 540 minutes of raw data. It includes psychological data, physiological data and behavioural data of 40 participants during driving tasks. Table 7 summarizes the details of the PPB-Emo dataset dataset.
The information in participant-level was pre-processed to accomplish de-identification in accordance with the General Data Protection Regulation (GDPR)41. For time synchronization across data, we convert all timestamps from UTC + 8 to UTC + 0 and clipped the raw data. Previous studies have shown that the physiological expression of human emotions can last at least 30 s15,42. Therefore, based on the gear change information of the driving behaviour data, we regard the multi-modal data 30 s after the participants start driving as the most effective data in data processing.
For the EEG data and driving behaviour data of each participant, we first exported the raw data from D-Lab, the data format is.txt. Then we converted the data format to.csv, and clipped the first 30 s of driving behaviour and EEG data as the most effective data, renamed and stored them respectively. For the video data of each participant, we first exported the original video data from Liveview, the data format is.mp4. Subsequently, we clipped the first 30 s of the video data as the most effective data, and divided the original shot into 6 images, respectively stored and renamed, including road scenarios video, infrared middle facial video, driving body gesture video, RGB left facial video, RGB middle face video, RGB right face video. Please note that any unedited video and raw log-level data recordings will not be provided. Meanwhile, the code for pre-processing of these data will not be in public either, because the privacy-sensitive information contained exceed the boundaries of the information we are allowed to share. More details can be found in the section of code availability.
In the root path of the dataset, it was organized into the following seven main directories: psychological data, physiological data, driving behavioural data, facial expression data, body gesture data, road scenario data, and scripts. The README.TXT file in these directories will give a detailed explanation. For each participant, a unique two-digit participant ID is assigned.
This directory contains the data of participant biographic, self-reported emotion labels and personality traits as three.xlsx files.
BIO.XLSX. Each row contains the biographical data of a participant, organized by participant ID, gender (1 = male, 2 = female), age and driving age.
Emotion label.XLSX. Each row contains the self-reported data of a participant’s experienced emotions, organized according to participant ID, valence, arousal, dominance, category, and intensity. The SAM scale was used to measure valence, arousal, and dominance, the DES scale was used to measure category and intensity. The organization of content in each row is shown in the Table 10.
EPQ.XLSX. Each row contains the Eysenck personality questionnaire data of a participant, organized according to participant ID, P-score, E-score, N-score, L-score, Where P reflects psychoticism/socialisation, E is extraversion/introversion, N means neuroticism/stability, and L is lie/social desirability.
40 sub-folders are further divided in this directory, each sub-folder contains the data of all the EEG signal per participant. These sub-folders were named after the participant ID and include multiple CSV files. Each CSV file corresponds to valid emotional driving. Each row contains the EEG data at an instantaneous measurement and is organized according to rec-time, UTC, 32 channels EEG data, α, β, γ, δ, θ frequency bands data for each channel. The organization of content in each row is shown in the Table 8. Besides, the EEG montage description file is contained in the directory. The TXT file described the channels’ information created to display activity over the entire head and to provide lateralizing and localizing information, which will help the understanding and analysis of EEG data.
40 sub-folders are further divided in this directory, each sub-folder contains all the driving behavioural data (DBD) of one participant. These sub-folders were named after the participant ID and include multiple CSV files. Each CSV file corresponds to valid emotional driving. Each row contains the driving behavioural data at an instantaneous measurement and is organized according to rec-time, UTC, acceleration, lateral-acceleration, gas-pedal-position, brake-pedal-force, gear, steering-wheel-position, velocity, lateral-velocity, x-position, y-position, z-position. The organization of content in each row is shown in the Table 9.
40 sub-folders are further divided in this directory, each sub-folder contains the data of all the facial expression per participant. The sub-folders are named after the participant ID and include 4 sub-sub folders which are central RGB (CRGB) facial expression data, left RGB (LRGB) facial expression data, right RGB (RRGB) facial expression data, and central infrared (CIR) facial expression data. Each folder contains multiple MP4 files, and each MP4 file corresponds to valid emotional driving. The facial expression data of a participant’s emotional driving record is shown in the Fig. 5.
Video data content of PPB-Emo dataset. (A) facial expression data, including central infrared facial expression, central RGB facial expression, left RGB facial expression, right RGB facial expression; (B) body gesture data, (C) road scenario data. The use of the relevant portraits in Fig. 5 has been authorized by the participants, and the identifiable information has been anonymized with the knowledge of the participants.
40 sub-folders are further divided in this directory, each sub-folder contains the data of body gesture per participant. These sub-folders were named after the participant ID and include multiple MP4 files. Each MP4 files file corresponds to valid emotional driving. The body gesture data of a participant’s emotional driving record is shown in the Fig. 5.
This directory is divided into 40 sub-folders, each of which contains the data of driving road scenario per participant. These sub-folders were named after the participant ID and include multiple MP4 files. Each MP4 files file corresponds to valid emotional driving. The driving road scenario data of a participant’s emotional driving record is shown in the Fig. 5.
This directory contains one sub-folder of selected video-audio clips and one clip raw links.xlsx file.
Selected video-audio clips. This sub-folder contains seven selected video-audio clips for driver emotion induction. The target emotions corresponding to the seven clips are anger, sadness, disgust, fear, happiness, neutral and surprise.
Selected video-audio clips raw links.XLSX. Each row contains the selected video-audio clips raw link of a target emotion, organized by target emotion and raw link.
The preprocessing and main analysis codes (Python scripts) are summarized in this directory. All results in the technical verification section can be copied using these scripts. For more details, please read the instructions in the README.md file.
Our validation consists of reliability validation of emotion labels, quality validation of physiological and behavioural data, as well as correlation analysis of physiology, behaviour and emotion labels.
In this section, a K-Means cluster algorithm43 was performed to provide a intuitive visualization analysis for the distribution of 40 participants’ subjective rating scores. Then the distribution of each emotion labels was summarized using 3-dimension histograms.
The SAM we used evaluated emotions in three dimensions: valence, arousal and dominance. To validate the reliability, we performed data clustering and visualization analysis towards this three dimensions. To guarantee that each feature is equally treated, we non-dimensionalized the data by projecting all of the subjective scores to a range of 0 to 1 using the max-min normalization method. Then, the values of valence, arousal, and dominance were used as the coordinate values of the scatter diagram. Figure 6(A) shows the distribution of 40 participants’ rating score after normalization.
(A) shows the full picture of the scatter diagram; (B–D) shows the distribution of points on each projection surface. AD = angry driving, FD = fear driving, DD = disgusted driving, SAD = sad driving, SD = surprised driving, HD = happy driving, ND = neutral driving.
The rating scores were clustered using a K-Means algorithm, and the center of each cluster is shown in the Fig. 6(A). Seven clusters represent seven discrete emotion including, anger driving, fear driving, disgust driving, sad driving, surprise driving, happy driving and neutral driving. The center points of each cluster have no overlap and the classification of clusters is relatively obvious, especially the Happy Driving, Angry Driving and Fear Driving scenario. Other clustered points are partially overlapped due to the complexity of emotions and the fact that the participants’ different understanding of certain emotions while they did the scoring. To provide a more comprehensive display, we projected the 3-D scatter diagram into 2-D diagrams. Figure 6(B–D) shows the results after projection, and the center points of each cluster still have no overlap and the classification of clusters is relatively obvious.
The participants’ ratings scores of valence, arousal and dominance, emotion category and intensity were summarized in Fig. 7. The x-coordinate represents seven emotion category, the y-coordinate represents the values of the subjective scores, and the z-coordinate represents the total number of each item.
(A) The distribution of valence scores and emotion category, (B) The distribution of arousal scores and emotion category, (C) The distribution of dominance scores and emotion category, (D) The distribution of emotion intensity and emotion category.
Figure 7(A) shows the distribution of valence. Valence means the positivity or negativity of an emotion according to the definition. Positive emotions have higher valence scores while negative emotions have lower valence scores. The data distribution shown in Fig. 7(A) conforms to this pattern. The valence scores of negative emotions (such as sad, angry, disgust and fear) are mainly located between 1 and 4 while the valence scores of positive or neutral emotions (such as neutral, happy and surprised) are mainly located between 5 and 9. By conforming to the regular distribution pattern, the valence score is verified.
Figure 7(B) shows the distribution of arousal. According to the definition, arousal ranges from excitement to relaxation. The data distribution shown in Fig. 7(B) consist with this pattern. As Fig. 7(B) shows, the arousal scores of neutral only located at the 1, which means the participants feel relaxed and have no positive or negative emotions at this moment. This feature meet our objective experience, which validate the reliability of arousal data.
Figure 7(C) shows the distribution of dominance. According to the valence-arousal-dominance model, dominance ranges from submissive to dominant. Fear is low-dominance and anger is high-dominance. The distribution of fear driving shown in Fig. 7(C) concentrated mainly between 1 and 3, which conforms to this pattern. The distributions of other emotions mainly located between 4 and 6, which shows that participants had a mid-level control towards these emotions. By conforming to the regular distribution pattern, the reliability of dominance score is verified.
Figure 7(D) shows the distribution of emotion intensity. Based on the definition of DES, the score of intensity and the strength of different emotions are positively related. The distribution verifies that participants’ emotions have been successfully stimulated since all of the data are distributed between 5 and 9 and most of them located between 6 and 9.
For each variable involved in the research, we performed a visual display and a quality control, and the quality of data measurements has been thoroughly tested. The relevant signals were extracted as time function. The overall results per drive after quality control is shown in Figs. 8 and 9.
Time functions of EEG signals under different emotion states. Each row in the figure represents a different emotional state while driving(AD, FD, DD, SAD, SD, HD and ND). Each column of the figure represents signals obtained from different channels. (A) EEG signals of channel 1 to channel 16, (B) EEG signals of channel 17 to channel 32.
Time functions of driving behaviour under different emotion states. Each row in the figure represents a different emotional state while driving. From top to bottom, they are AD, FD, DD, SAD, SD, HD and ND. Each column of the figure represents a different dynamics signal.
The device we used to obtain EEG signals is a head-mounted device. The data was obtained through the electrodes. Therefore, the quantity and length of participants’ hair will affect the contact of the electrodes as well as the results. Thus, good contact is necessary to get effective data. The valid data was extracted and shown in Fig. 8, which contained the trend curves of 32 channels of EEG signals under different emotional conditions. As we can see from Fig. 8, the signals collected by most channels have obvious similarities and trends except channel 20. The signals from channel 20 are invalid due to poor contact during the experiment.
These variables include 11 dynamics parameters that represent driving behaviour, including accelerations, degree/force of gas/brake-pedal, velocities and positions, which provide a comprehensive description of driving behaviour. Figure 9 shows the time function of different driving behaviours under seven different emotions. Each sub-figure in Fig. 9 contains 40 curves and each curve represents the time functions of a participant’s driving signals. All of the driving behaviour data were acquired through a driving simulator mentioned above. As shown in Fig. 9, the tendency of driving behaviour data is consistent in the same emotion.
Figure 10 shows the Spearman correlations analysis44 among 11 driving behaviours, 32-channel EEG signals and 3 dimensions of emotions. The correlations were shown in the form of heatmap. In Fig. 10, the data was first non-dimensionalized using the max-min normalization methods. Then, the mean and variance values of the data were calculated separately for each participant and the processed data was combined together with 3 dimensions of emotions scores. The Spearman’s correlations analysis was then used to obtain the correlation coefficients. The correlation coefficients are in a range of −1 to 1.
Correlation heatmap of signals. (A) Mean values of EEG signals and three dimensions scores of emotions, (B) Variance values of EEG signals and three dimensions scores of emotions, (C) Mean values of driving behavioural data and three dimensions scores of emotions, (D) Variance values of driving behavioural data and three dimensions scores of emotions.
Fig. 10(A) shows the correlation heatmap between mean values of EEG signals and 3 dimensions scores of emotions. Correlations with high significance were noticed for the groups of valence-channel(CH)5/CH11/CH14/CH27, arousal-CH12/CH27/CH31 and dominance-CH3/CH26. Figure 10(B) shows the correlation heatmap between variance values of EEG signals and 3 dimensions scores of emotions. Correlations with high significance were noticed for the groups of valence-CH9/CH12/CH13/CH17, arousal-CH4/CH7/CH9/CH13/CH16/CH17/CH28/CH30/CH31 and dominance-CH5/CH6/CH8/CH20 /CH28/CH29.
Fig. 10(C) shows the correlation heatmap between mean values of Driving behavioural data and 3 dimensions scores of emotions. The correlation coefficients were normalized before the process. Correlations with high significance were noticed for the group of arousal-brake pedal force. Figure 10(D) shows the correlation heatmap between variance values of Driving behavioural data and 3 dimensions scores of emotions. Correlations with high significance were noticed for the groups of valence-gas pedal degree, arousal-brake pedal force, arousal-vertical velocity/velocity and dominance-velocity.
The user can use any video playback tool (e.g., QuickTime Player) to open the.MP4 file. The user can use any spreadsheet or workbook software to open the.CSV file. The data can be directly imported into Python, Matlab and other statistical or programming tools for analysis. We recommend that users check the sample report in the database for further clarification.
With the help of various data mining techniques, the dataset can be used for the analysis of the relationship between the emotion-physiology-behaviour-personality trait of human drivers45,46. It can be used to analyze the driving risks caused by the emotions of human drivers13,47. It can also be used to analyze the difference between human emotion expression in driving scenes and life scenes6,48. The dataset can also be used to analyze the cognitive and behaviour changes of human drivers in different emotions in the driving environment, and then conduct research on human drivers’ emotion regulation strategies46,49.
Moreover, by applying various machine learning techniques, based on the collected driving behaviour, EEG, facial expressions, driving posture, and road scene information, the dataset can be used to develop single-modal/multi-modal driver emotion monitoring algorithms35,50. Accurate and efficient emotion monitoring algorithms will help the emotion-aware interaction between human drivers and intelligent vehicles to improve driving safety and comfort, and increase human trust in machines46,51. Besides, The PPB-Emo dataset will also benefit human emotion research in other daily tasks.
Driver emotion induction. This study used video-audio clips to induce driver emotions. Although all these video-audio clips have been validated to be effective in eliciting expected human driver emotions, this study cannot completely rule out the possibility that there may be difference between video-audio clips induced emotion and real on-road driving scenarios induced emotion. In the future, we will further conduct on-road driving experiments to study the emotions of human drivers in real on-road driving scenarios.
Participants.There was a gender imbalance in all three experiments in this study, with a 3:1 male to female ratio. Although this is basically the same as the male-to-female ratio of Chinese drivers52, this may affect the use of the dataset. Future research should maintain a balanced gender ratio as much as possible. In addition, in Experiment II, 409 Chinese participants were invited to answer the online questionnaires. Since the scenarios to elicit the same emotions might vary in different cultures53, the induction effect of the driving scenarios provided in Experiment II on different culture groups needs further research.
The data pre-processing methods and procedures of validation mentioned in the technical validation section were carried out in Jupyter Notebook. Python version 3.5.8 was used throughout. The correlation analysis and distribution display are conducted using seaborn, sciki-learn54 and pandas packages. The codes and a brief description(readme.md) have been uploaded.
Williams, S. E., Lenze, E. J. & Waring, J. D. Positive information facilitates response inhibition in older adults only when emotion is task-relevant. Cognition and Emotion 34, 1632–1645, https://doi.org/10.1080/02699931.2020.1793303 (2020).
Article PubMed Google Scholar
Pessoa, L. How do emotion and motivation direct executive control? Trends in cognitive sciences 13, 160–166, https://doi.org/10.1016/j.tics.2009.01.006 (2009).
Article PubMed PubMed Central Google Scholar
Gross, J. J. Handbook of emotion regulation (Guilford publications, New York City, 2013).
Hoemann, K. & Feldman Barrett, L. Concepts dissolve artificial boundaries in the study of emotion and cognition, uniting body, brain, and mind. Cognition and Emotion 33, 67–76, https://doi.org/10.1080/02699931.2018.1535428 (2019).
Article PubMed Google Scholar
Koppel, S. et al. A comparison of older drivers’ driving patterns during a naturalistic on-road driving task with patterns from their preceding four-months of real-world driving. Safety science 125, 104652, https://doi.org/10.1016/j.ssci.2020.104652 (2020).
Article Google Scholar
Li, W. et al. A spontaneous driver emotion facial expression (defe) dataset for intelligent vehicles: Emotions triggered by video-audio clips in driving scenarios. IEEE Transactions on Affective Computing 0, 1–1, https://doi.org/10.1109/TAFFC.2021.3063387 (2021).
Article Google Scholar
AAA. New american driving survey: Updated methodology and results from july 2019 to june 2020. Print at https://newsroom.aaa.com/wp-content/uploads/2021/07/New-American-Driving-Survey-Fact-Sheet-FINAL.pdf (2020).
MTPRC. The number of vehicles in china reached 380 million. Print at http://www.caam.org.cn/chn/11/cate_76/con_5233729.html (2021).
Dingus, T. A. et al. Driver crash risk factors and prevalence evaluation using naturalistic driving data. Proceedings of the National Academy of Sciences 113, 2636–2641, https://doi.org/10.1073/pnas.1513271113 (2016).
ADS CAS Article Google Scholar
Wickens, C. M., Mann, R. E., Ialomiteanu, A. R. & Stoduto, G. Do driver anger and aggression contribute to the odds of a crash? a population-level analysis. Transportation research part F: traffic psychology and behaviour 42, 389–399, https://doi.org/10.1016/j.trf.2016.03.003 (2016).
Article Google Scholar
Ellison-Potter, P., Bell, P. & Deffenbacher, J. The effects of trait driving anger, anonymity, and aggressive stimuli on aggressive driving behavior. Journal of Applied Social Psychology 31, 431–443, https://doi.org/10.1111/j.1559-1816.2001.tb00204.x (2001).
Article Google Scholar
Mesken, J., Hagenzieker, M. P., Rothengatter, T. & De Waard, D. Frequency, determinants, and consequences of different drivers’ emotions: An on-the-road study using self-reports,(observed) behaviour, and physiology. Transportation research part F: traffic psychology and behaviour 10, 458–475, https://doi.org/10.1016/j.trf.2007.05.001 (2007).
Article Google Scholar
Stephens, A. N. & Groeger, J. A. Anger-congruent behaviour transfers across driving situations. Cognition & emotion 25, 1423–1438, https://doi.org/10.1080/02699931.2010.551184 (2011).
Article Google Scholar
Deng, Z. et al. A probabilistic model for driving-style-recognition-enabled driver steering behaviors. IEEE Transactions on Systems, Man, and Cybernetics: Systems 52, 1838–1851, https://doi.org/10.1109/TSMC.2020.3037229 (2020).
Article Google Scholar
Li, W. et al. Visual-attribute-based emotion regulation of angry driving behaviours. IEEE Intelligent Transportation Systems Magazine 14, 10–28, https://doi.org/10.1109/MITS.2021.3050890 (2021).
CAS Article Google Scholar
Bigman, Y. E. & Gray, K. Life and death decisions of autonomous vehicles. Nature 579, E1–E2, https://doi.org/10.1038/s41586-020-1987-4 (2020).
CAS Article PubMed Google Scholar
Amolika, S., Sai, C., Vincent, V., Huang, C. & Vinayak, D. Crash and disengagement data of autonomous vehicles on public roads in california. Scientific Data 8, 0–0, https://doi.org/10.1038/s41597-021-01083-7 (2021).
Article Google Scholar
Zepf, S., Hernandez, J., Schmitt, A., Minker, W. & Picard, R. W. Driver emotion recognition for intelligent vehicles: a survey. ACM Computing Surveys 53, 1–30, https://doi.org/10.1145/3388790 (2020).
Article Google Scholar
Olaverri-Monreal, C. Promoting trust in self-driving vehicles. Nature Electronics 3, 292–294, https://doi.org/10.1038/s41928-020-0434-8 (2020).
Article Google Scholar
Nunes, A., Reimer, B. & Coughlin, J. F. People must retain control of autonomous vehicles. Print at https://www.nature.com/articles/d41586-018-04158-5 (2018).
McDuff, D. & Czerwinski, M. Designing emotionally sentient agents. Communications of the ACM 61, 74–83, https://doi.org/10.1145/3186591 (2018).
Article Google Scholar
ERTRAC. Connected automated driving roadmap. Print at https://www.ertrac.org/uploads/documentsearch/id57/ERTRAC-CAD-Roadmap-2019.pdf (2019).
ISO/TR-21959-1. Road vehicles – human performance and state in the context of automated driving – part 1: Common underlying concepts. Print at https://www.iso.org/standard/78088.html (2020).
Li, S. et al. Drivers’ attitudes, preference, and acceptance of in-vehicle anger intervention systems and their relationships to demographic and personality characteristics. International Journal of Industrial Ergonomics 75, 102899, https://doi.org/10.1016/j.ergon.2019.102899 (2020).
Article Google Scholar
Berdoulat, E., Vavassori, D. & Sastre, M. T. M. Driving anger, emotional and instrumental aggressiveness, and impulsiveness in the prediction of aggressive and transgressive driving. Accident Analysis & Prevention 50, 758–767, https://doi.org/10.1016/j.aap.2012.06.029 (2013).
Article Google Scholar
Jeon, M. Don’t cry while you’re driving: Sad driving is as bad as angry driving. International Journal of Human–Computer Interaction 32, 777–790, https://doi.org/10.1080/10447318.2016.1198524 (2016).
Article Google Scholar
Keltner, D., Sauter, D., Tracy, J. & Cowen, A. Emotional expression: Advances in basic emotion theory. Journal of nonverbal behavior 1–28, https://doi.org/10.1007/s10919-019-00293-3 (2019).
Lee, B. G. et al. Wearable mobile-based emotional response-monitoring system for drivers. IEEE Transactions on Human-Machine Systems 47, 636–649, https://doi.org/10.1109/THMS.2017.2658442 (2017).
Article Google Scholar
Braun, M., Weber, F. & Alt, F. Affective automotive user interfaces–reviewing the state of driver affect research and emotion regulation in the car. ACM Computing Surveys 54, 1–26, https://doi.org/10.1145/3460938 (2021).
Article Google Scholar
Zeng, Z., Pantic, M., Roisman, G. I. & Huang, T. S. A survey of affect recognition methods: Audio, visual, and spontaneous expressions. IEEE transactions on pattern analysis and machine intelligence 31, 39–58, https://doi.org/10.1109/TPAMI.2008.52 (2009).
Article PubMed Google Scholar
Patton, M. Q. Qualitative research & evaluation methods: Integrating theory and practice (Sage publications, Thousand Oaks, 2014).
Zhang, T. et al. The roles of initial trust and perceived risk in public’s acceptance of automated vehicles. Transportation research part C: emerging technologies 98, 207–220, https://doi.org/10.1016/j.trc.2018.11.018 (2019).
Article Google Scholar
Zhang, T., Chan, A. H., Li, S., Zhang, W. & Qu, X. Driving anger and its relationship with aggressive driving among chinese drivers. Transportation research part F: traffic psychology and behaviour 56, 496–507, https://doi.org/10.1016/j.trf.2018.05.011 (2018).
Article Google Scholar
Roidl, E., Siebert, F. W., Oehl, M. & Höger, R. Introducing a multivariate model for predicting driving performance: The role of driving anger and personal characteristics. Journal of safety research 47, 47–56, https://doi.org/10.1016/j.jsr.2013.08.002 (2013).
Article PubMed Google Scholar
Li, W. et al. Cogemonet: A cognitive-feature-augmented driver emotion recognition model for smart cockpit. IEEE Transactions on Computational Social Systems 9, 667–678, https://doi.org/10.1109/TCSS.2021.3127935 (2021).
Article Google Scholar
Bradley, M. M. & Lang, P. J. Measuring emotion: the self-assessment manikin and the semantic differential. Journal of behavior therapy and experimental psychiatry 25, 49–59, https://doi.org/10.1016/0005-7916(94)90063-9 (1994).
CAS Article PubMed Google Scholar
Gross, J. J. & Levenson, R. W. Emotion elicitation using films. Cognition & emotion 9, 87–108, https://doi.org/10.1080/02699939508408966 (1995).
Article Google Scholar
Eysenck, H. J. & Eysenck, S. B. G. Manual of the Eysenck Personality Questionnaire (junior & adult) (Hodder and Stoughton Educational, London, 1975).
Taamneh, S. et al. A multimodal dataset for various forms of distracted driving. Scientific data 4, 1–21 (2017).
Article Google Scholar
Li, W. PPB-Emo: A multimodal psychological, physiological and behavioural dataset for human emotions in driving tasks, figshare, https://doi.org/10.6084/m9.figshare.c.5744171.v1 (2022).
EU. General data protection regulation (gdpr). Print at https://gdpr.eu/tag/gdpr/ (2019).
Levenson, R. W., Carstensen, L. L., Friesen, W. V. & Ekman, P. Emotion, physiology, and expression in old age. Psychology and aging 6, 28, https://doi.org/10.1037/0882-7974.6.1.28 (1991).
CAS Article PubMed Google Scholar
Likas, A., Vlassis, N. & Verbeek, J. J. The global k-means clustering algorithm. Pattern recognition 36, 451–461, https://doi.org/10.1016/S0031-3203(02)00060-2 (2003).
ADS Article Google Scholar
Zar, J. H. Significance testing of the spearman rank correlation coefficient. Journal of the American Statistical Association 67, 578–580, https://doi.org/10.1080/01621459.1972.10481251 (1972).
Article MATH Google Scholar
Fairclough, S. H. & Dobbins, C. Personal informatics and negative emotions during commuter driving: effects of data visualization on cardiovascular reactivity & mood. International Journal of Human-Computer Studies 144, 102499, https://doi.org/10.1016/j.ijhcs.2020.102499 (2020).
Article Google Scholar
Schlegel, K. et al. A meta-analysis of the relationship between emotion recognition ability and intelligence. Cognition and emotion 34, 329–351, https://doi.org/10.1080/02699931.2019.1632801 (2020).
Article PubMed Google Scholar
Šeibokaitė, L., Endriulaitienė, A., Sullman, M. J., Markšaitytė, R. & Žardeckaitė-Matulaitienė, K. Difficulties in emotion regulation and risky driving among lithuanian drivers. Traffic injury prevention 18, 688–693, https://doi.org/10.1080/15389588.2017.1315109 (2017).
Article PubMed Google Scholar
Matsumoto, D. & Ekman, P. American-japanese cultural differences in intensity ratings of facial expressions of emotion. Motivation and emotion 13, 143–157, https://doi.org/10.1007/BF00992959 (1989).
Article Google Scholar
Sani, S. R. H., Tabibi, Z., Fadardi, J. S. & Stavrinos, D. Aggression, emotional self-regulation, attentional bias, and cognitive inhibition predict risky driving behavior. Accident Analysis & Prevention 109, 78–88, https://doi.org/10.1016/j.aap.2017.10.006 (2017).
Article Google Scholar
Lan, Z., Sourina, O., Wang, L., Scherer, R. & Müller-Putz, G. R. Domain adaptation techniques for eeg-based emotion recognition: a comparative study on two public datasets. IEEE Transactions on Cognitive and Developmental Systems 11, 85–94, https://doi.org/10.1109/TCDS.2018.2826840 (2018).
Article Google Scholar
Yokoi, R. & Nakayachi, K. Trust in autonomous cars: exploring the role of shared moral values, reasoning, and emotion in safety-critical decisions. Human factors 63, 1465–1484, https://doi.org/10.1177/0018720820933041 (2020).
Article PubMed Google Scholar
CAAM. the national motor vehicle ownership exceeded 395 million. Print at http://www.caam.org.cn/chn/11/cate_120/con_5235344.html (2022).
Matsumoto, D. & Hwang, H. S. Culture and emotion: The integration of biological and cultural contributions. Journal of Cross-Cultural Psychology 43, 91–118 (2012).
Article Google Scholar
Pedregosa, F. et al. Scikit-learn: Machine learning in python. the Journal of machine Learning research 12, 2825–2830, https://doi.org/10.5555/1953048.2078195 (2011).
MathSciNet Article MATH Google Scholar
Ma, Z., Mahmoud, M., Robinson, P., Dias, E. & Skrypchuk, L. Automatic detection of a driver’s complex mental states. In International Conference on Computational Science and Its Applications, 678–691, https://doi.org/10.1007/978-3-319-62398-6_48 (Springer, Cham, 2017).
Angkititrakul, P., Petracca, M., Sathyanarayana, A. & Hansen, J. H. Utdrive: Driver behavior and speech interactive systems for in-vehicle environments. In Intelligent Vehicles Symposium, 566–569, https://doi.org/10.1109/IVS.2007.4290175 (IEEE, New York, 2007).
Healey, J. A. & Picard, R. W. Detecting stress during real-world driving tasks using physiological sensors. IEEE Transactions on intelligent transportation systems 6, 156–166, https://doi.org/10.1109/TITS.2005.848368 (2005).
Article Google Scholar
Download references
This study was supported by the National Key Research and Development Program of China (Grant Number: 2019YFB1706102) and National Natural Science Foundation of China, the Major Project (Grant Number: 52131201). The authors would like to thank Huafei Xiao, Yujing Liu, Jiyong Xue, Yinghao Zhong, Ying Lin, Chengmou Li, Juncheng Zhang, Hao Chen for data collection.
College of Mechanical and Vehicle Engineering, Chongqing University, Chongqing, 400044, China
Wenbo Li, Guofa Li, Guanzhong Zeng, Peizhi Wang, Bingbing Zhang, Xinyu Su & Gang Guo
School of Vehicle and Mobility, Tsinghua University, Beijing, 100084, China
Wenbo Li, Ruichen Tan & Dongpu Cao
Department of Aerospace, Transport, and Manufacturing, Cranfield University, Cranfield, MK430AL, UK
Yang Xing
Department of Civil Engineering, Tsinghua University, Beijing, 100084, China
Shen Li
School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing, 210094, China
Dawei Pi
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
W.L. designed, prepared, conducted the data collection of experiment I/II/III, performed data curation analysis, wrote and edited the manuscript. R.T. performed the technical validation, wrote and edited the manuscript. Y.X. contributed to the data analysis methodology and edited the manuscript. G.L. co-designed the experiment III and edited the manuscript. S.L. edited and revised the manuscript. G.Z. performed data curation and processing. P.W. prepared, conducted the data collection of experiment III. B.Z. prepared, conducted the data collection of experiment III. X.S. conducted the data collection of experiment I/II. D.P. advised, revised, and reviewed the manuscript. G.G. supervised the experiment, provided the resources, and reviewed the manuscript. D.C. supervised the experiment, advised, revised, and reviewed the manuscript. All authors have read and agreed to this version of the manuscript.
Correspondence to Gang Guo or Dongpu Cao.
The authors declare no competing interests.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Li, W., Tan, R., Xing, Y. et al. A multimodal psychological, physiological and behavioural dataset for human emotions in driving tasks. Sci Data 9, 481 (2022). https://doi.org/10.1038/s41597-022-01557-2
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41597-022-01557-2
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
Advertisement
Advanced search
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.
Electric Jazz trio Lyder talk musical influences, theory and off-grid instrumentation – Inverted Audio
Inverted Audio
Inverted Audio
In a world where anyone with a laptop can become your next biggest musical fascination, and in which an avalanche of young or relatively inexperienced producers are attaining status in the global music scene with enough hard graft, it’s a continuing interest to see musicians teaming up in new and inventive ways — especially to produce music that they are not already known for.
Lyder is next up in that regard: the Münich trio is comprised of independently established artists, from the deep techno / liquid DnB musics of Lindsey Wang AKA Polygonia, to Niklas Bühler’s Hip-Hop and pedal-board saxophonist Moritz Stahl. The trio land on Jazz-O-Tech, a label that Inverted Audio has reported on recently with regard to their release of electronic/jazz hybridisation from the likes of Finnish duo Aki Himanen and Aleksi Kinnunen.
Lyder’s debut EP, ‘Vivacity‘, is a rare thing that strikes notes for both the electronically averse jazz fanatic and the jazz-averse electronica individuals, fulfilling spiritual jazz needs as equally as it grants beautiful moments of synthesised harmonics.
We spoke with the trio about some of the more unique aspects of their group, and its relatively rare composition: how do “classically trained” musicians approach their solo music-making, the nature of using acoustic or “off-grid” electronic instruments that allow for true flexibility and improvisation, and their stance on the necessity of musical theory in the modern climate of production, where all the “answers” are being thrown at musicians from thousands of YouTube creators.
Alongside this interview, we’re delighted to present a premiere of EP closer and stand-out highlight ‘Helichrysum‘, an ambient dream-walk featuring lilting sung expression by Polygonia, subtle mobile percussion and sun-licked atmospheres.
Hello — firstly, congratulations on the EP. It feels very accomplished for a debut. Can you begin by introducing yourselves, and your role within the band?
We are three artists from Munich, who love Jazz and electronic music, but each of us has a different education and skill focus. The thing that we all have in common is that we play acoustic instruments while also being electronic music producers.
Our versatile saxophonist Moritz Stahl, who has one of the coolest pedal boards we’ve encountered, has a jazz background and our pianist plus FX master Niklas Bühler is at home in the genres of Hip-Hop and House. Lindsey Wang, our vocalist and violinist who is creating most of the beats, grew up with a classical music education and is based in the genre of Deep Techno.
We don’t really have that one lead musician since we want to highlight every single member of our band. Every track that we create gives another one of us the chance to express themselves in their own way and give their own touch to that particular piece.
Besides knowing some of your other music personally, it’s very apparent on listening that you have been active musicians outside of this project. Can you talk to us briefly about those projects?
Moritz is part of many Jazz Ensembles (e.g. Ark Noir, Ralph Heidel, Jazzrausch Bigband etc), which are also electroacoustic bands, that explore mixing up both worlds of music. He also started several projects unter the pseudonym “odizouu”, under which he features his works with saxophone and effect pedals and Octatrack.
Lindsey produces and DJ’s deep techno, ambient and downtempo under the pseudonym Polygonia. Her main message is usually to represent natural motifs and thus to raise awareness for the love of nature. Niklas produces Hip-Hop and instrumental music, also with a specific focus on sound-design and special textures and timbres.
We all love to experiment with new ways of playing but also listening to music – being part of many different projects reflects that.
Now, onto Lyder. I’d like to start by asking Lindsay about her role in the group, and any sources of inspiration behind the loose, sound-as-word “lyrics” — why did you make the conscious decision to speak without words on the album? What meaning do you think can be said without explicit expression?
I produce the beats, I do a lot of sound design and I also play solo instruments in one or the other track, such as my voice (‘Sea of Thought‘) or the violin (‘Contemplation‘).
I don’t want to tell the listener what emotions they should feel at that moment. I use my vocals more like an instrument and at the same time approach the tradition of scatting. However, I use this technique in my own way and want to combine it with the sound aesthetic of electronic soundscapes. The voice is basically similar to a wind instrument and can take on very different colours and formants through various consonants and vowels.
This conveys the emotion on a meta-level and gives the listener a much wider scope for interpretation. There are already enough pieces with classically sung vocals, I quite enjoy doing this myself as well. But I find it challenging and exciting to have a strong effect on the listener without using words. That’s why I decided to use my voice in this way for this music project as well as my own solo project.
What inspired you all to take the leap into working on the album together as Lyder?
The project was initiated by Lindsey. Before founding the ensemble, she already collaborated with the label Jazz-o-Tech in terms of graphic design and music production for a longer period of time. From the very beginning of the collaboration, both parties intended to release an EP together in the context of this genre fusion.
So, she sought out suitable candidates from her circle of friends in Munich which she knew would fit together well stylistically. In the past, there have been several collaborations between Moritz Stahl’s band Ark Noir, Niklas Bühler and Lindsey Wang. In this respect, it was already clear, based on some good experiences, that the musical vision of all those involved must be a very similar one.
This album marks the beginning of a longer collaboration, which will bring many more releases in the future.
Another content-related topic which made us even more stoked to work on this together was the idea of performing sound-design focused music live in a spontaneous way.
Of course, every live performance has some spontaneity, but with electronic instruments (drum computers, Ableton push, Octatrack etc) it is harder to “really” play live in terms of being able to improvise without prepared drum kits, arrangements, patterns and parts.
The practice of playing acoustic instruments allows the player to decide in a completely different manner and tempo, which makes this way of performing a spontaneous decision much more flexible and faster compared to electronic instruments. That’s why it is really interesting to explore both – acoustic and electronic – realms. Like that, we are able to learn how to make them compatible with each other.
With each of you being established musicians in your own right, how was the process of creating the album? Did it flow well, or were there moments when someone wanted a different sound in a given moment, or to lead it somewhere else?
In the beginning, we didn’t even know what our process actually looked like. We just met in the studio and jammed together a bit. The only thing we decided beforehand was the approximate sonic mood we wanted to get into. Then we just started playing for a longer period of time and recorded it all. It was always a lot of fun, but we weren’t quite sure how the material we recorded would turn out in the end.
When we listened to it later with a little bit of distance and set up the projects with all of the elements, it became clear to us that there were a lot of great ideas and the session actually payed off. In this sense, the creative part of making music together was very easy and intuitive. The detail work at the end, where you have to pay attention to so many details in the mixing and arrangement, was of course, as with any other production, relatively time consuming.
However, this does not detract at all from the harmonious collaborative production environment of the entire EP, because in the end, we have discovered that we can actually cooperate very well with each other and that we can come to great results very quickly, despite having only a few meetings.
For each of you, as individuals, what was the biggest lesson that working in this group gave you? What will it help you with in your solo work?
The biggest lesson for us all was that we learned about the importance of recording every jam session, no matter how bad we think it is at the moment. Because with some distance, our perspective towards the material changes in a positive way. With a little editing it usually becomes very valuable and can form the foundation for a great piece.
I wanted also to ask about the overriding structure of the album. It starts with a light number before switching up into a more beat-driven piece, and on the flip side the same pattern repeats. It seems like a decision aimed at the vinyl product — is this the case, or is a more simple or complex one? How do you think the layout of tracks on an EP or LP makes (or breaks) the record?
At first, we had actually planned a different order, with ‘Frantic Circles‘ and ‘Contemplation‘ changing places on the track list. In the current order, as well as in the alternative version, an emotionally charged track with BPM variation is the welcome.
Secondly, we wanted to create additional dynamics within the EP structure and present our experimental but still melodic ambient piece before the third very energetic track. In both variations of the sequence, the harmonic piece, which in a way conveys a feeling of coming home, comes at the end of the release.
Now, finally, we have decided to change the order to the current one and put our fastest and most energetic track in second place. We wanted it to be clear right from the start, within the first two tracks, that we have a wide stylistic variety to offer and are not afraid to experiment. In this regard, we did not concern ourselves with the usual arrangement of tracks on vinyl products, but we are glad that our variant is even compatible with this.
For me, one of the richer tracks is ‘Frantic Circles’, on which you can clearly hear an influence of electronic club, particularly certain strands of less aggressive techno. I’m curious, how did you draw the line between the Lyder music and the electronic music that you produce separately? Or, is it more of a blurred line at all times?
We don’t have to worry too much about “what fits the project”, because we try to just work together iteratively on the tracks. We play/add stuff we think is cool, then we talk about the results. Everything we add comes directly from the individual cores of our artistic personalities and could have happened in a production of our own, too.
“Lyder’s sound” is then created by our interaction with each other and adapting to things that we approach differently. It’s similar to a jam session. You bring yourself to the jam and play your “own stuff” until other people in the band bring in some of their own ideas or techniques and make you adapt to the new situation. This mix of preference creates a new sound without having to conceptualise it first in a meeting.
Finally, I’d like to ask your thoughts on a broader question: there’s classical or “professional” musical training in your group. Do you think that there is a certain kind of musicality that is fading, as a result of so many producers being self-taught from similar videos and sources? Do you think that established tutelage results in the same tendency toward homogeneic sound?
We are all somewhat professionally trained musicians since childhood and encourage the playing of instruments plus the knowledge of music theory to some extend. It would be a very hard criticism to accuse modern production for being unmusical or “less smart” than for example the Rolling Stones in the ’60s.
In these times it’s easier than ever to pick up electronic music production – more competition means better producers and in the end more quality productions. The only thing that sticks out a bit is that in electronic production some people see music theory as too complicated and time consuming. But in the end it’s a big timesaver.
If you compare the mainstream music of today with the music played in the past, you will definitely notice that in both eras the uniformity of style was always commonplace at the time. In this extent, no decrease in musical quality can be observed, rather the opposite, since the internet nowadays offers a much wider range of possibilities for small artists and niche genres.
Due to the many platforms and the easy accessibility of these, a strong diversification of musical style can be found nowadays and thus a huge variety is available outside the mainstream media. This broadens the cultural knowledge of music and is a big gift to our cultural diversity.
‘Vivacity’ EP is out now via Jazz-O-Tech. Order a copy from .
TRACKLIST
1. Sea Of Thought
2. Frantic Circles
3. Contemplation
4. Helichrysum
Copyright © 2022 Inverted Audio Ltd. Privacy Policy
In order to give you the best experience, Inverted Audio uses cookies and similar technologies for performance, analytics, personalization, advertising, and to help our site function.
Inverted Audio uses cookies and similar technologies to give you a better experience, enabling things like:
– basic site functions
– ensuring secure, safe transactions
– remembering privacy and security settings
– analyzing site traffic and usage
– helping us understand the audience
– showing relevant, targeted ads on our web properties
Detailed information can be found on our Privacy Policy page.
Privacy Policy
Some of the technologies we use are necessary for critical functions like security and site integrity, account authentication, security and privacy preferences, internal site usage and maintenance data, and to make the site work correctly for browsing and transactions.
Cookies Used
These technologies are used for things like:
– personalised ads
– to limit how many times you see an ad
– to understand usage via Google Analytics
– to understand how you got to our web properties
– to ensure that we understand the audience and can provide relevant ads
We do this with social media, marketing, and analytics partners (who may have their own information they’ve collected). Saying no will not stop you from seeing our ads, but it may make them less relevant or more repetitive.
Cookies Used
Our website uses tracking software to monitor our visitors to understand how they use it. We use software provided by Google Analytics, which use cookies to track visitor usage. This software will save a cookie to your computer’s hard drive to track and monitor your engagement and use of the website, and to help identify you on future visits. It will not store, save or collect personal information.
Cookies Used
The Journey Behind Leading Soulful R&B Record Label, Ace Beat Music – Ace Mungin – The Hype Magazine
Published on August 5th, 2022 | by Charles Myambo
“Ace Beat Music” owner – Derrick “Ace” Mungin
Nowadays, the word EXCEPTIONAL is one that gets thrown around a lot and perhaps it’s just down to semantics. However, only a select few people in this world can truly assume the moniker of being “exceptional”. One of those people is the iconic Derrick “Ace” Mungin. Ace was born and raised in New Jersey albeit having a large presence in Philadelphia. It was back in the 70’s when Ace and his cousin would venture into music. The pair rapidly established themselves as promising Disco DJ prospects. With each passing year, Ace began to become a more recognized DJ. Regular live performances and event hosting as a DJ culminated in the increased fame of Ace Mungin. He would quickly gain the rapport of industry peers and music fans. Ace’s prominence as a DJ continued for a number of years before he eventually transitioned to full scale music production. By the 80s, it was eerily obvious that Ace was destined for more than just being a DJ or producer. His profound musical talent was widely acknowledged, and his ambition was palpable. It was TIME! Ace had his sights set on creating a record label. In 1985, he founded the independent and internationally acclaimed record label, Ace Beat Music. The main base of operations for Ace Beat Music was New Jersey where Ace had first learnt his music trade. Everything was coming full circle for Ace and there was no denying him his dues. Ace Beat Music commanded great attention with hits released by groups such as Charvoni, Jomanda, Blaze, Intense and Paul Scott and more. The record label even worked with the iconic Michelle Ayers who is a legend of the soulful music genre. Michelle’s hit tracks helped propel Ace Beat into a totally different stratosphere! Ever since that period, it became public knowledge that the label excels in and focuses on soulful music. They have released hybrid “gospel & house” hits with artists such as Alicia Myers, Jeff Redd, Blue Magic and Ray Barretto Jr to name a few.
“Ace Beat Music” Team
Over the years, Ace Beat Music would lead a massive surge in local New Jersey talent that went on to become mainstream musicians. The record label became known for ushering in the New Jersey sound in dance and house music. Timeless dance music became synonymous with the Ace Beat moniker. The record label’s reputation was also bolstered by hosting a wide array of concerts, club events and underground parties. NYC Paradise Garage and NJ Club Zanzibar were some of the hotspots for Ace Beat Music. Prominent DJ’s such as Tony Humphries, Larry Patterson, and Larry Levan played Ace Beat Music tracks very frequently. The defining moment for the record label came when they released the hit track “Let the rain come down” which became an instant classic in New Jersey! At this point the record label was truly taking flight. The new millennium brought even more success with it. In the early 2000s, Ace Beat Music envisaged “next level” expansion! In an effort to push its brand of House music, the record label opened their first apparel Shop in Bloomfield, New Jersey. Additionally, the record label jumped full throttle into the digital world around a time when Mp3 players and iPods became prevalent. All their music was strategically created to be compatible with the widespread Mp3 players.
Derek “Ace” Mungin & Affiliates
In recent years, Ace Beat Music has started to gain significantly more attention outside the USA. Their Garage Movement album truly took the world by storm. In 2019, a few of their albums caught the eye of a 2A record label in England. This inspired a mutually beneficial partnership between the 2 records. The partnership was very fruitful! Ace Beat Music had a number of their tracks played in the UK as well as several European nations as a result of this partnership. Another integral partnership for the record label was the one between Ace Mungin and Derrick “Ricky” Nelson. Ricky is the decorated producer for gospel group Higher Praise also known as Praise Report. Over the years, Ricky has had the opportunity to work with one of R&B’s Hottest Male artists, JOE and this brought him to the major label scene, getting him sit downs with some of the industry’s best, Mercury Records, Electra Records, Tommy Boy and Ron Grant of Sony. In subsequent years, Ricky collaborated with the group INTENSE. The 2 of them together wrote and produced music for the dance label Ace Beat Music, seeing them release over 20 EP’s and multiple singles. This significantly contributed to giving Ace Beat Music the sound of Soulful, Inspirational and Gospel House Music. “If You Know” was featured on B.E.T. and The Word Network Video Gospel which only further propagated both Ricky and Ace Beat Music. This was only the cusp of the greatness to ensue. Ricky garnered the attention of 1 of the world’s foremost entities, The Salvation Army. He would go on to do several soundtracks for their “Educational” and “Short Films” departments. This further consolidated the prominence of both Ricky and his partner, Ace Mungin. Ricky along with Tyrone Payton later established their label TyRick Music. They produced hits such as “Thank GOD, I Made It”, “Dancing In The Rain”, “All Your Love” and Ricky’s latest project “IT’s My Time”. It has been quite a ride and 2022 promises to be the biggest year yet for Ace Mungin, Ace Beat Music and fellow partner, Ricky Nelson. Stay tuned!
https://youtu.be/GbOreoxPCkQ
Sanction Remixes
https://www.youtube.com/watch?v=UR0R9eyNt4w&t=10s
Tags: 80s music, 90s music, Ace, Ace B, Ace Mungin, Acebeat, gospel amd house kusic, Gospel music, Hit single, HOLLYWOOD, House music, Hype, Hype Magazine, ipod, ipod era, mp3, mp3 era, Music, R&B, Record label, Record label owner, Record Labels, RnB, Salvation, salvation army, salvation army company, slavation army partnership, soulful music, soulful record label, Success, success story, thank god, thank god i made it, the ace, The Hype Magazine, The Salvation Army, trending
Charles Myambo is a columnist and correspondent for industry leader, The Hype Magazine. He is also well known for being a multiple genre #1 Amazon best selling author. In addition to that, Charles is a verified journalist as seen in Muck Rack & Press Reader and he is also a highly touted celebrity news correspondent. Moreover, Charles is an international celebrity host and interviewer who has been covered by some of the world’s biggest publications. At present, his interviews have been covered by some of America’s biggest outlets such as Medium, Flipboard, Press Reader, Muck Rack and many others. His interviews are also well documented by huge Zimbabwean outlets such as NewsDay, Daily News, iHarare, ZiFM Stereo, H-Metro, The Financial Gazette as well as several other European and American publications.
Comments are closed.
The Journey Behind Leading Soulful R&B Record Label, Ace Beat Music – Ace Mungin
Who is the Wrinkles Club?
How David S. Chung Built an Inclusive Nightlife Industry Within the Washington D.C. Area
Inventing Frank Carrozzo
Impressive Artist on the Rise: Siple
More than just an average urban music magazine, The Hype Magazine services our readers and subscribers a diverse collection of stories, interviews and impactful editorials. HYPE is not a niche market outlet, our audience range includes fashion fans; gamers; movie nuts; MMA followers; EDM; rock, television personalities, etc., if it’s news worthy we cover it.
Copyright © 2002 – 2022 The Hype Magazine, Inc – How You Perceive Everythin
Monkeypox Virus Infection in Humans across 16 Countries — April–June 2022 | NEJM – nejm.org
Prepare to become a physician, build your knowledge, lead a health care organization, and advance your career with NEJM Group information and services.
Stay connected to what’s important in medical research and clinical practice
Subscribe to the most trusted
and influential source of
medical knowledge
Already a subscriber? Renew or Sign in
Subscribe
or Renew
Selected specialties
View all specialties
Selected Topics
View all topics
Selected Multimedia
View all multimedia
Current Issue
Recent Issues
Browse full issue index
Recently Published Articles
Browse recently published
View all learning/CME
Other NEJM Group Learning
Subscribe
or Renew
Original Article
The investigators in the SHARE-net clinical group are listed in the Supplementary Appendix, available at NEJM.org.
Drs. Thornhill, Barkati, Klein, and Orkin contributed equally to this article.
Metrics
Before April 2022, monkeypox virus infection in humans was seldom reported outside African regions where it is endemic. Currently, cases are occurring worldwide. Transmission, risk factors, clinical presentation, and outcomes of infection are poorly defined.
We formed an international collaborative group of clinicians who contributed to an international case series to describe the presentation, clinical course, and outcomes of polymerase-chain-reaction–confirmed monkeypox virus infections.
We report 528 infections diagnosed between April 27 and June 24, 2022, at 43 sites in 16 countries. Overall, 98% of the persons with infection were gay or bisexual men, 75% were White, and 41% had human immunodeficiency virus infection; the median age was 38 years. Transmission was suspected to have occurred through sexual activity in 95% of the persons with infection. In this case series, 95% of the persons presented with a rash (with 64% having <10 lesions), 73% had anogenital lesions, and 41% had mucosal lesions (with 54 having a single genital lesion). Common systemic features preceding the rash included fever (62%), lethargy (41%), myalgia (31%), and headache (27%); lymphadenopathy was also common (reported in 56%). Concomitant sexually transmitted infections were reported in 109 of 377 persons (29%) who were tested. Among the 23 persons with a clear exposure history, the median incubation period was 7 days (range, 3 to 20). Monkeypox virus DNA was detected in 29 of the 32 persons in whom seminal fluid was analyzed. Antiviral treatment was given to 5% of the persons overall, and 70 (13%) were hospitalized; the reasons for hospitalization were pain management, mostly for severe anorectal pain (21 persons); soft-tissue superinfection (18); pharyngitis limiting oral intake (5); eye lesions (2); acute kidney injury (2); myocarditis (2); and infection-control purposes (13). No deaths were reported.
In this case series, monkeypox manifested with a variety of dermatologic and systemic clinical findings. The simultaneous identification of cases outside areas where monkeypox has traditionally been endemic highlights the need for rapid identification and diagnosis of cases to contain further community spread.
Monkeypox virus, a zoonotic orthopox DNA virus related to the virus that causes smallpox, was first described in humans in 1970 in the Democratic Republic of Congo (formerly Zaire).1 Sporadic outbreaks of infection have been reported in Africa, typically originating from contact with wildlife reservoirs (particularly rodents).2 Such outbreaks and travel-associated cases outside Africa have had limited secondary spread, and therefore human-to-human transmission has been deemed inefficient.3-9 Despite the fact that monkeypox virus has circulated for decades in regions where it has traditionally been endemic, research into monkeypox has been neglected and underfunded. Since early May 2022, more than 3000 monkeypox virus infections have been reported in more than 50 countries across five regions, prompting the World Health Organization to declare monkeypox an “evolving threat of moderate public health concern” on June 23, 2022.10,11
Transmission of monkeypox virus occurs through large respiratory droplets, close or direct contact with skin lesions, and possibly through contaminated fomites.12 There is no clear evidence of sexual transmission through seminal or vaginal fluids. Vertical transmission and fetal deaths have been described.13
Endemic monkeypox is generally self-limited, with clade-dependent case fatality rates of 1 to 10%.9 Illness typically begins with fever, followed by the development of multiple papular, vesiculopustular, and ulcerative lesions on the face and body and prominent lymphadenopathy.9,14 Complications include pneumonitis, encephalitis, keratitis, and secondary bacterial infections.14 Young children and immunocompromised persons, including persons living with human immunodeficiency virus (HIV) infection, have been reported to be at increased risk for severe outcomes, but whether effective antiretroviral therapy (ART) for HIV infection modifies this risk is unknown.15
The current global outbreak of monkeypox virus infection in humans suggests changes in biologic aspects of the virus, changes in human behavior, or both; such changes might be driven by waning smallpox immunity, relaxation of coronavirus disease 2019 (Covid-19) prevention measures, resumption of international travel, and sexual interactions associated with large gatherings.16 To date, the current spread has disproportionately affected men who are gay or bisexual and other men who have sex with men, which suggests amplification of transmission through sexual networks.
Phylogenetic analyses suggest that the virus has circulated undetected for some time outside areas where it has been endemic, possibly masquerading as other sexually transmitted infections (STIs).17 The current international case definitions (Table S1 and Fig. S1 in the Supplementary Appendix, available with the full text of this article at NEJM.org) may not be adequate to reflect the changing spectrum of clinical presentations, allow early identification, clarify transmission routes, and inform international public health policies and clinical trials. The case series we report here may help to inform the response.
We used the U.K. Health Security Agency (UKHSA) definition of a confirmed case: a laboratory-confirmed monkeypox virus infection defined by a positive result on monkeypox virus polymerase-chain-reaction (PCR) assay in a specimen from any anatomical site.18 The type of clinically qualified PCR assay used for the identification of monkeypox virus infections was locally determined on the basis of availability and guidelines.
Among the 528 persons with monkeypox virus infection reported by these sites and included in the case series, 84 (16%) were in the Americas and 444 (84%) were in Europe, Israel, or Australia.
In response to the worldwide outbreaks, academic researchers within the London-based Sexual Health and HIV All East Research (SHARE) Collaborative contacted peers in affected countries through informal clinical and research networks and formed a global collaborative group (SHARE-net). Members of this group contributed to a convenience-sample case series in the interests of improving case identification. The geographic distribution of SHARE-net contributing sites is shown in Figure 1.
Each contributing center completed a deidentified structured case-report spreadsheet developed on May 31, 2022 (Fig. S2). Drop-down menus and free-text fields were used. The case-report spreadsheet captured clinical data and was not part of a research protocol. Variables of interest were derived from case definitions that preceded this outbreak and from evolving international case definitions. The case-report spreadsheet was iteratively refined on the basis of growing clinical experience within our network. We particularly focused on potential exposures, demographic characteristics, early symptoms, clinical findings, and diagnosis. Infections diagnosed since April 27, 2022, were reported between June 1 and June 24, 2022. Templates were provided for uniform presentation of the clinical image Web library (available in the Supplementary Appendix).
Persons with PCR-confirmed monkeypox were invited to contribute to the case series by their health care provider. Written informed consent was obtained in accordance with local standards and maintained in the participants’ clinical file, along with local institutional review board approval when required. Separate image-specific consent was obtained for the use of images included in this report. Deidentified data were securely transferred to the coordinating site and stored and analyzed within the Queen Mary University of London Barts Cancer Institute data safe haven.
Data were analyzed with the use of SPSS software, version 28 (IBM). Aggregate or deidentified data are presented to avoid deductive disclosure of the identities of the persons with infection.
A total of 528 cases of confirmed human monkeypox infection from five continents, 16 countries, and 43 clinical sites are included in this series (Figure 1). Demographic and clinical characteristics of the persons with infection are summarized in Table 1.
Overall, 98% of the persons with infection were gay or bisexual men, and 75% were White. The median age was 38 years. A total of 41% of the persons were living with HIV infection, and in the vast majority of these persons, HIV infection was well controlled; 96% of those with HIV infection were taking ART, and in 95% the HIV viral load was less than 50 copies per milliliter (Table 2). Preexposure prophylaxis had been used in the month before presentation in 57% of the persons who were not known to have HIV infection.
Panel A shows the evolution of cutaneous lesions in a person with monkeypox; images a1 and a2 show facial lesions, images b1 through b3 show a penile lesion, and images c1 and c2 show a lesion on the forehead. The polymerase-chain-reaction (PCR) status is indicated if available. IM denotes intramuscular, and MSM man who has sex with men. Panel B shows oral and perioral lesions (image a, perioral umbilicated lesions; image b, perioral vesicular lesion on day 8, PCR positive; image c, ulcer on the left corner of the mouth on day 7, PCR positive; image d, tongue ulcer; image e, tongue lesion on day 5, PCR positive; and images f, g, and h, pharyngeal lesions on day 0, 3, and 21, respectively, PCR positive on day 0 and 3 and negative on day 21). Panel C shows perianal, anal, and rectal lesions (image a, anal and perianal lesions on day 6, PCR positive; images b and c, rectal and anal lesions in a single person, PCR positive; image d, perianal ulcers, PCR positive; image e, anal lesions; image f, umbilicated perianal lesion on day 3, PCR positive; image g, umbilicated perianal lesions on day 3, PCR positive; and image h, perianal ulcer on day 2, PCR positive).
The characteristics of monkeypox in this case series are summarized in Table 3. Skin lesions were noted in 95% of the persons (Figure 2). The most common anatomical sites were the anogenital area (73%); the trunk, arms, or legs (55%); the face (25%); and the palms and soles (10%). A wide spectrum of skin lesions was described (see the clinical image Web library), including macular, pustular, vesicular, and crusted lesions, and lesions in multiple phases were present simultaneously. Among persons with skin lesions, 58% had lesions that were described as vesiculopustular. The number of lesions varied widely, with most persons having fewer than 10 lesions. A total of 54 persons presented with only a single genital ulcer, which highlights the potential for misdiagnosis as a different STI. Mucosal lesions were reported in 41% of the persons. Involvement of the anorectal mucosa was reported as the presenting symptom in 61 persons; this involvement was associated with anorectal pain, proctitis, tenesmus, or diarrhea (or a combination of these symptoms). Oropharyngeal symptoms were reported as the initial symptoms in 26 persons; these symptoms included pharyngitis, odynophagia, epiglottitis, and oral or tonsillar lesions. In 3 persons, conjunctival mucosa lesions were among the presenting symptoms. Common systemic features during the course of the illness included fever (in 62%), lethargy (41%), myalgia (31%), and headache (27%), symptoms that frequently preceded a generalized rash; lymphadenopathy was also common (56%).
The initial presenting feature and the sequence of subsequent cutaneous and systemic features (captured as free text) showed considerable variation. The most common presentation was an initial skin lesion or lesions, primarily in the anogenital area, body (trunk or limbs), or face (or a combination of these locations), with the number of lesions increasing over time and with or without systemic features (see the series of timelines in the clinical image Web library). Because of the observational nature of this case series, the variability in the time of presentation, and the reliance on clinical records, a clear chronology of potential exposure and symptoms was available for only 30 persons. Of these 30 persons, 23 had a clearly defined exposure event, with a median time from exposure to the development of symptoms of 7 days (range, 3 to 20). Lesions with prodrome occurred in 17 of the 30 persons; however, isolated anogenital or oral lesions were also observed (13 persons). The median time from the onset of symptoms to the first positive PCR result was 5 days (range, 2 to 20), and the median time from the development of the first skin lesion to the development of additional skin lesions was 5 days (range, 2 to 11) (see the clinical image Web library). In persons for whom data on follow-up PCR testing were available, the latest time point at which a lesion remained positive was 21 days after symptom onset.
The clinical presentation was similar among persons with HIV infection and those without HIV infection. The clinical characteristics of the persons with HIV infection are shown in Table 2. Concomitant STIs were reported in 109 of the 377 persons (29%) who were tested, with gonorrhea, chlamydia, and syphilis found in 8%, 5%, and 9%, respectively, of the those who underwent testing.
The suspected means of monkeypox virus transmission as reported by the clinician was sexual close contact in 95% of the persons. It was not possible to confirm sexual transmission. A sexual history was recorded in 406 of 528 persons; among these 406 persons, the median number of sex partners in the previous 3 months was 5 partners, 147 (28%) reported travel abroad in the month before diagnosis, and 103 (20%) had attended large gatherings (>30 persons), such as Pride events. Overall, 169 (32%) were known to have visited sex-on-site venues within the previous month, and 106 (20%) reported engaging in “chemsex” (i.e., sex associated with drugs such as mephedrone and crystal methamphetamine) in the same period.
A total of 70 persons (13%) were admitted to a hospital. The most common reasons for admission were pain management (21 persons), mostly for severe anorectal pain, and treatment of soft-tissue superinfection (18). Other reasons included severe pharyngitis limiting oral intake (5 persons), treatment of eye lesions (2), acute kidney injury (2), myocarditis (2), and infection-control purposes (13). There was no difference in the frequency of admission according to HIV status. Three new cases of HIV infection were identified.
Two types of serious complications were reported: one case of epiglottitis and two cases of myocarditis. The epiglottitis occurred in a person with HIV infection who had a CD4 cell count of less than 200 per cubic millimeter; the person was treated with tecovirimat and recovered completely. The myocarditis cases were self-limiting (<7 days) and resolved without antiviral therapy. One occurred in a person with HIV infection who had a CD4 cell count of 780 per cubic millimeter, and one occurred in a person without HIV infection. No deaths were reported.
In total, 5% of the 528 persons received monkeypox-specific treatment. The drugs administered included intravenous or topical cidofovir (in 2% of persons), tecovirimat (2%), and vaccinia immune globulin (<1%).
The health setting of initial presentation reflected referral patterns and included sexual health or HIV clinics, emergency departments, and dermatology clinics and, less commonly, primary care. A positive PCR result was most commonly obtained from skin or anogenital lesions (97%); other sites were less frequently sampled. The reported percentages of positive PCR results were 26% for nasopharyngeal specimens, 3% for urine specimens, and 7% for blood specimens. Semen was tested in 32 persons from five clinical sites and was PCR positive in 29 persons (4 of these instances have previously been reported19) (Table 4).
We describe a human monkeypox case series that includes 528 infections from four WHO regions (Europe, Americas, Western Pacific, and Eastern Mediterranean) and 16 countries reported over a 2-month period. Sexual activity, largely among gay or bisexual men, was by far the most frequently suspected route of transmission. The strong likelihood of sexual transmission was supported by the findings of primary genital, anal, and oral mucosal lesions, which may represent the inoculation site. Monkeypox virus DNA that was detectable by PCR in seminal fluid in 29 of the 32 cases in which seminal fluid was tested further supports this hypothesis. However, whether semen is capable of transmitting infection remains to be investigated, since it is unknown whether the viral DNA detected in these specimens was replication competent. Reports of clusters associated with sex parties or saunas further underscore the potential role of sexual contact as a promoter of transmission. International travel and attendance at large gatherings linked to sex-on-site activities may explain the global spread of monkeypox infections amplified through sexual networks.
The clinical presentation we describe has some distinct features not included in the internationally accepted case definitions.20 Although these definitions recently expanded to include gay or bisexual men and other men who have sex with men as a risk group, they do not specifically highlight mucosal or rectal presentations, nor do they caution about the possibility of initial single-lesion manifestations. Existing definitions do recommend consideration of monkeypox in the context of any “unusual” rash but do not cover the full range of possible manifestations. Solitary genital skin lesions and lesions involving the palms and soles may easily lead to misdiagnosis as syphilis and other STIs, which may in turn delay detection. Concomitant laboratory-confirmed STIs were also reported in 29% of the persons tested. Consequently, we recommend consideration of monkeypox in at-risk persons presenting with traditional STI symptoms.
In our series, the diagnosis of monkeypox was most commonly confirmed from swab specimens taken from skin or genital lesions, with throat or nasopharyngeal swab specimens and blood less commonly tested. Anal or rectal swabs should be considered for those presenting with anal pain or proctitis.
Clinical outcomes in this case series were reassuring. Most cases were mild and self-limited, and there were no deaths. Although 13% of the persons were admitted to a hospital, no serious complications were reported in the majority of those admitted. Common reasons for admission were pain and bacterial superinfection. However, rare serious complications (myocarditis and epiglottitis) were observed, and therefore the full spectrum of the disease and complications needs further study, particularly over the long term, given the short duration of our follow-up. The clinical presentation and severity of monkeypox appeared similar among persons with or without HIV infection, but in almost all those in our series who had HIV infection, HIV was well controlled, with a median CD4 cell count of 680 cells per cubic millimeter.
A small percentage of persons (5%) received antiviral therapy, most often with cidofovir or tecovirimat. Data on the effectiveness of these compounds in humans are limited, although studies in animals and case reports suggest that they may be active.21 In this case series, 56 persons were older than 50 years of age, and overall, 9% reported having previously received a smallpox vaccination, so we cannot comment on its effect.
Health care professionals need to be educated to recognize and manage cases of monkeypox. Targeted health promotion that sensitively supports enhanced testing and education in populations at risk is needed. Involving communities from the outset in shaping the implementation of public health interventions is essential to ensure that they are appropriate and nonstigmatizing and to avoid messaging that will drive the outbreak underground. The duration of potential infectious viral shedding after lesions have cleared remains unclear. UKHSA guidelines have advised condom use for 8 weeks after infection, but the potential duration and infectiousness of viral shedding in semen requires study. The potential role of vaccines in preexposure prophylaxis also requires study; vaccines are currently being offered to persons who are at high risk for infection in the United Kingdom, New York City, and Canada.
Although the current outbreak is disproportionately affecting gay or bisexual men and other men who have sex with men, monkeypox is no more a “gay disease” than it is an “African disease.” It can affect anyone. We identified nine heterosexual men with monkeypox. We urge vigilance when examining unusual acute rashes in any person, especially when rashes are combined with systemic symptoms, to avoid missing diagnoses in heterosexual persons.
Several limitations of our study need to be highlighted. Our case series is an observational convenience case series in which infection was confirmed with various (locally approved) PCR platforms. Persons in this case series had symptoms that led them to seek medical care, which implies that persons who were asymptomatic, had milder symptoms, or were paucisymptomatic could have been missed. Established links between persons receiving preexposure HIV prophylaxis and sexual health clinics and between persons living with HIV infection and HIV clinics could have led to a referral bias, especially given the potential for early care seeking in these groups. Spread to other populations is anticipated, and vigilance is required. Symptoms were recorded from the time of presentation, and therefore early symptoms may have been underreported, limiting information on the incubation period.
Because viruses know no borders, the world needs to move cohesively and quickly to close knowledge gaps and to contain the outbreak. Without widely available treatment or prophylaxis, rapid case identification is vital to containment. As is common in clinical medicine, there is a diversity in how illnesses may manifest — and monkeypox is no different.
Disclosure forms provided by the authors are available at NEJM.org.
Drs. Thornhill, Barkati, Klein, and Orkin contributed equally to this article.
This article was published on July 21, 2022, at NEJM.org.
A data sharing statement provided by the authors is available with the full text of this article at NEJM.org.
We thank everyone who volunteered to be included in this descriptive case series and those who provided additional consent for their deidentified images to be shown, the many collaborating investigators for their dedication and their diligent review of the data provided, and Ms. Sadna Ullah of the SHARE Collaborative at Queen Mary University of London for administrative support.
From the Blizard Institute and the SHARE Collaborative, Queen Mary University of London, and the Department of Infection and Immunity, Barts Health NHS Trust (J.P.T., V.A., C.M.O.), the Department of Genitourinary Medicine and Infectious Disease, Guys and St. Thomas’ NHS Trust (A.N.), the Department of Sexual Health, Homerton University Hospital (I.R.), and the Clinical Infection Unit, St. George’s University Hospitals NHS Foundation Trust (M.S.H.) — all in London; the Department of Medicine, Division of Infectious Diseases (S.B., L.B.H., M.B.K.), the J.D. MacLean Centre for Tropical Diseases (S.B.), the Research Institute of the McGill University Health Centre (S.B., M.B.K.), and the Chronic Viral Illness Service, Department of Medicine (M.B.K.), McGill University Health Centre, Montreal, and the Department of Medicine, University Health Network, University of Toronto (S.W.), the Division of Infectious Diseases and the MAP Centre for Urban Health Solutions, St. Michael’s Hospital (D.T.), and the Department of Medicine, University of Toronto (D.T.), Toronto — all in Canada; University Hospital Bonn, Department of Medicine I, Bonn (J.R., C.B.), the Department of Infectious Diseases, St. Joseph Hospital, Berlin (P.M.), Medizinisches Versorgungszentrum (MVZ) München am Goetheplatz, Munich (S. Noe), and the Infektionsmedizinisches Centrum Hamburg (ICH) Study Center, Hamburg MVZ ICH Stadmitte, Hamburg (C.H.) — all in Germany; the National Institute for Infectious Diseases Lazzaro Spallanzani IRCCS, Rome (A.A., F.M.), the Division of Infectious Disease, Luigi Sacco Hospital, Azienda Socio-Sanitaria Territoriale Fatebenefratelli Sacco (D.M.), and the Department of Infectious and Tropical Diseases, IRCCS–Ospedale San Raffaele (S. Nozza), Milan, the Clinic of Infectious Diseases, University of Modena, Modena (C.M.), and the Infectious Diseases Division, Department of Medical Sciences, Azienda Ospedale Universita, Padua (A.C.) — all in Italy; the Department of Infectious Diseases, Sorbonne University, Assistance Publique–Hôpitaux de Paris (AP-HP), Pitié–Salpêtrière Hospital (R.P., V.P.), and the Department of Infectious Diseases, Saint Louis Lariboisière Hospital, AP-HP, University of Paris Cité (C.P.), Paris, and the Department of Prevention and Community Health, Créteil Intercommunal Hospital, Créteil (C.P.) — all in France; the HIV Cure Research Center, Department of Internal Medicine and Pediatrics, Faculty of Medicine and Health Sciences, Ghent University and Ghent University Hospital, Ghent (L.V.), and the HIV/STI Clinic, Institute of Tropical Medicine, Antwerp (E.F.) — both in Belgium; the Sackler Faculty of Medicine, Tel Aviv University, and the Israel Department of Infectious Diseases and Infection Control, Tel Aviv Sourasky Medical Center, Tel Aviv, Israel (M.Y.); the Department of Dermatology, University Hospital La Paz, Centro de Investigación Biomédica en Red de Enfermedades Infecciosas (CIBERINFEC), Instituto de Investigación Hospital Universitario La Paz (E.S.), and CIBERINFEC, Instituto de Salud Carlos III (J.L.B.), Madrid, and the Infectious Diseases Service, Hospital Clinic–IDIBAPS (Instituto de Investigaciones Biomédicas August Pi i Sunyer), University of Barcelona, Barcelona (J.L.B.) — all in Spain; Hospital de Curry Cabral–Centro Hospitalar Universitário de Lisboa Central, Lisbon, Portugal (F.M.M.); Amsterdam University Medical Centers, University of Amsterdam, Amsterdam (A.G.); the Department of Infectious Diseases, University Hospital of Copenhagen, Hvidovre, Denmark (A.-B.E.H.); the Condesa Specialized Clinic, Mexico City (J.I.L.); the François-Xavier Bagnoud Center for Health and Human Rights at Harvard University, Boston (K.M.); and the Department of Infectious Diseases and Hospital Epidemiology, University Hospital Zurich, Zurich, Switzerland (J.N.).
Prof. Orkin can be contacted at [email protected], or at the SHARE Collaborative, Centre for Immunobiology, Blizard Institute, Queen Mary University of London, 4 Newark St., London E1 2AT, United Kingdom.
The investigators in the SHARE-net clinical group are listed in the Supplementary Appendix, available at NEJM.org.
The investigators in the SHARE-net clinical group are listed in the Supplementary Appendix, available at NEJM.org.
1. Ladnyj ID, Ziegler P, Kima E. A human infection caused by monkeypox virus in Basankusu Territory, Democratic Republic of the Congo. Bull World Health Organ 1972;46:593–597.
2. Human monkeypox — Kasai Oriental, Democratic Republic of Congo, February 1996–October 1997. MMWR Morb Mortal Wkly Rep 1997;46:1168–1171.
3. Durski KN, McCollum AM, Nakazawa Y, et al. Emergence of monkeypox — West and Central Africa, 1970–2017. MMWR Morb Mortal Wkly Rep 2018;67:306–310.
4. Vaughan A, Aarons E, Astbury J, et al. Two cases of monkeypox imported to the United Kingdom, September 2018. Euro Surveill 2018;23:1800509–1800509.
5. Vaughan A, Aarons E, Astbury J, et al. Human-to-human transmission of monkeypox virus, United Kingdom, October 2018. Emerg Infect Dis 2020;26:782–785.
6. Erez N, Achdout H, Milrot E, et al. Diagnosis of imported monkeypox, Israel, 2018. Emerg Infect Dis 2019;25:980–983.
7. Yong SEF, Ng OT, Ho ZJM, et al. Imported monkeypox, Singapore. Emerg Infect Dis 2020;26:1826–1830.
8. Yinka-Ogunleye A, Aruna O, Dalhat M, et al. Outbreak of human monkeypox in Nigeria in 2017-18: a clinical and epidemiological report. Lancet Infect Dis 2019;19:872–879.
9. Bunge EM, Hoet B, Chen L, et al. The changing epidemiology of human monkeypox — a potential threat? A systematic review. PLoS Negl Trop Dis 2022;16(2):e0010141–e0010141.
10. Multi-country monkeypox outbreak: situation update. World Health Organization, June 17, 2022 (https://www.who.int/emergencies/disease-outbreak-news/item/2022-DON393).
11. Multi-country monkeypox outbreak: situation update. World Health Organization, June 27, 2022 (https://www.who.int/emergencies/disease-outbreak-news/item/2022-DON396).
12. Monkeypox: background information. UK Health Security Agency, 2018 (https://www.gov.uk/guidance/monkeypox#transmission).
13. Mbala PK, Huggins JW, Riu-Rovira T, et al. Maternal and fetal outcomes among pregnant women with human monkeypox infection in the Democratic Republic of Congo. J Infect Dis 2017;216:824–828.
14. Monkeypox. World Health Organization, May 19, 2022 (https://www.who.int/news-room/fact-sheets/detail/monkeypox).
15. Ogoina D, Iroezindu M, James HI, et al. Clinical course and outcome of human monkeypox in Nigeria. Clin Infect Dis 2020;71(8):e210–e214.
16. 2022 Monkeypox outbreak global map. World Health Organization, 2022 (https://www.cdc.gov/poxvirus/monkeypox/response/2022/world-map.html).
17. O’Toole Á, Rambaut A. Initial observations about putative APOBEC3 deaminase editing driving short-term evolution of MPXV since 2017. 2022 (https://virological.org/t/initial-observations-about-putative-apobec3-deaminase-editing-driving-short-term-evolution-of-mpxv-since-2017/830).
18. Monkeypox: case definitions. UK Health Security Agency, 2022 (https://www.gov.uk/guidance/monkeypox-case-definitions).
19. Antinori A, Mazzotta V, Vita S, et al. Epidemiological, clinical and virological characteristics of four cases of monkeypox support transmission through sexual contact, Italy, May 2022. Euro Surveill 2022;27:2200421–2200421.
20. Monkeypox outbreak toolbox. World Health Organization, 2022 (https://www.who.int/emergencies/outbreak-toolkit/disease-outbreak-toolboxes/monkeypox-outbreak-toolbox).
21. Grosenbach DW, Honeychurch K, Rose EA, et al. Oral tecovirimat for the treatment of smallpox. N Engl J Med 2018;379:44–53.
10.1056/NEJMoa2207323-t1
Demographic and Clinical Characteristics of the Persons with Monkeypox.*
Percentages may not total 100 because of rounding. HIV denotes human immunodeficiency virus, IQR interquartile range, and STI sexually transmitted infection.
Sexual orientation and race or ethnic group were reported by the persons.
Travel from the country of residence in the month before the positive monkeypox virus polymerase-chain-reaction (PCR) result is shown.
10.1056/NEJMoa2207323-t2
Demographic and Clinical Characteristics of Persons with HIV Infection in the Case Series.*
ART denotes antiretroviral therapy, bPI boosted protease inhibitor, and NNRTI nonnucleoside reverse-transcriptase inhibitor.
Percentages were calculated with the total number of persons taking three-drug regimens (or two-drug regimens with integrase inhibitors included as a third agent) used as the denominator.
10.1056/NEJMoa2207323-t3
Diagnosis and Clinical Characteristics of Monkeypox in the Case Series.*
Percentages may not total 100 because of rounding.
Some persons underwent testing from multiple sites, and not all sites were tested for all persons.
More than one site per person may have been reported.
10.1056/NEJMoa2207323-t4
Characteristics of 32 Persons with Monkeypox According to Presence or Absence of Viral DNA in Seminal Fluid on PCR.*
Ma denotes macular, MU multiple ulcers, ND not done, and VP vesiculopustular.
Presenting symptoms are indicated as follows: 1, fever; 2, lethargy or exhaustion; 3, headache; 4, sore throat or pharyngitis; 5, lymphadenopathy; and 6, myalgia.
Among the 528 persons with monkeypox virus infection reported by these sites and included in the case series, 84 (16%) were in the Americas and 444 (84%) were in Europe, Israel, or Australia.
Panel A shows the evolution of cutaneous lesions in a person with monkeypox; images a1 and a2 show facial lesions, images b1 through b3 show a penile lesion, and images c1 and c2 show a lesion on the forehead. The polymerase-chain-reaction (PCR) status is indicated if available. IM denotes intramuscular, and MSM man who has sex with men. Panel B shows oral and perioral lesions (image a, perioral umbilicated lesions; image b, perioral vesicular lesion on day 8, PCR positive; image c, ulcer on the left corner of the mouth on day 7, PCR positive; image d, tongue ulcer; image e, tongue lesion on day 5, PCR positive; and images f, g, and h, pharyngeal lesions on day 0, 3, and 21, respectively, PCR positive on day 0 and 3 and negative on day 21). Panel C shows perianal, anal, and rectal lesions (image a, anal and perianal lesions on day 6, PCR positive; images b and c, rectal and anal lesions in a single person, PCR positive; image d, perianal ulcers, PCR positive; image e, anal lesions; image f, umbilicated perianal lesion on day 3, PCR positive; image g, umbilicated perianal lesions on day 3, PCR positive; and image h, perianal ulcer on day 2, PCR positive).
July 21, 2022
DOI: 10.1056/NEJMoa2207323
Most Viewed
Tap into groundbreaking research and clinically relevant insights
Already a subscriber? Sign In or Renew
Back to top
Yakima County Master Gardeners: Help your plants beat the dog days of summer – Yakima Herald-Republic
An example of a light-color shade cloth.
Drip irrigation puts water at the root of the plants.
An example of a light-color shade cloth.
Drip irrigation puts water at the root of the plants.
We have had a very hot summer and are anticipating a few more hot weeks ahead. This article will focus on suggestions for protecting your plants from the intense sun and possibly dropping the air and soil temperature around your plants.
With the excessive heat this summer, many gardeners have turned to shade cloth to protect their crops and tender plants. Shade cloth is an open-weave synthetic fabric that allows somewhat reduced amounts of air, light and water to pass through. Shade cloth is often used by commercial plant nurseries to cover greenhouses during the heat of the summer or to create shade houses for shade-loving plants.
Shade cloth may have advantages over other fabrics; for example, cotton sheets can become heavy when wet, and there is no way to know how much light it blocks out. On the other hand, shade cloth is available in 30%, 60% and 80% light reduction, with 60% being most commonly available at garden centers and big box stores. It is usually 6 feet wide and sold by the linear foot, and sometimes comes in premeasured lengths of 50 or 100 feet. Of course, many other sizes are available online but may require a minimum purchase that may be more than most home gardeners need.
Before buying shade cloth it is important to ask what you want it to do: reduce light or reduce heat? They are not the same! Shading for light intensity is different than shading for cooling. Black shade cloth provides the darkest shade but absorbs more of the sun’s heat, meaning there is less cooling effect, and unless the plants are shade-loving they may become spindly and leggy as they grow toward the light. Light-colored shade cloth allows the same percentage of light to pass through but is more reflective so the light inside the structure bounces around more, making the light more usable to plants. The reflective nature of light-colored shade cloth means it absorbs less heat and provides a slightly cooler environment. Many people automatically reach for black, brown or dark green shade cloth to get the darkest shade, incorrectly assuming they will also get the best cooling effect.
If you have already purchased dark shade cloth — no worries. The difference between the two is only a few degrees. By raising the fabric cover several feet above the leaf canopy and leaving one side open (the side away from direct sunlight) you will allow more reflected light to enter the structure and better ventilation to help vent the heat.
It is also very important to water in the morning when high temperatures are predicted, and the best way to water is with drip irrigation tubing that puts water at the roots of the plants. Another trick is to use the “magic of mulch,” which will help keep the soil moist with the added benefit of reducing the number of weeds. These help so the water does not evaporate as fast. This mulch can be as easy as putting grass clippings on top of the soil around each plant in a garden. For flower beds it can be bark chips, wood chips or other mulches available at box stores or nurseries.
Watering with misters or micro emitters for five to 10 minutes two to three times a day during the hottest part of the day can also lower the heat inside the structure by another 10 degrees for at least 30 to 60 minutes. Drive by the orchards and vineyards in our Valley and you can see overhead watering or misters that are used for crop protection. Some people report using less water inside shade cloth structures, as much as 65% less water, so be sure to adjust your irrigation as needed.
Last, but not least, be sure to take care of yourself and your pets. With the likelihood of continuing hot weather expected this month, it’s important for you and your pets to stay hydrated by drinking water or other liquids frequently.
Also, it’s best to avoid working outside during the heat of the day — so start early and stop before you become overheated. At the very least, take frequent rest breaks in a shady spot.
We usually have many cool nights during August, so maybe wait until just before sundown to work in the refreshing cool of the evening. Either way, you will avoid the possibility of getting overheated, sunburned and cranky.
We want our gardens to be fun, rewarding and productive, so we encourage “working smarter, not harder.”
As always, if you have any gardening questions feel free to contact our Master Gardener clinic at WSU Extension.
Gardening problems? The public is encouraged to visit the Master Gardener diagnostic clinic in Union Gap, Mondays and Fridays from 9 a.m. to noon and 1-4 p.m. Contact us at 509-574-1604 or email [email protected]. For better identification, bring a sample of the damaged plant in a sealed zip-close bag.
Your comment has been submitted.
Reported
There was a problem reporting this.
Log in
Keep it Clean. Please avoid obscene, vulgar, lewd, racist or sexually-oriented language.
PLEASE TURN OFF YOUR CAPS LOCK.
Don't Threaten. Threats of harming another person will not be tolerated.
Be Truthful. Don't knowingly lie about anyone or anything.
Be Nice. No racism, sexism or any sort of -ism that is degrading to another person.
Be Proactive. Use the 'Report' link on each comment to let us know of abusive posts.
Share with Us. We'd love to hear eyewitness accounts, the history behind an article.
The Yakima Herald-Republic is hiring.
Sign up to receive news and updates from this site directly to your desktop.
Click on the bell icon to manage your notifications at any time.
Get up-to-the-minute news sent straight to your device.
Over 100K Cars Shut From North American Production This Week Due To Chip Shortage – Slashdot
Follow Slashdot blog updates by subscribing to our blog RSS feed
The Fine Print: The following comments are owned by whoever posted them. We are not responsible for them in any way.
In that case you should buy an EV. They are far more resilient, orders of magnitude less complex, but do cost more.
EVs use twice as many semiconductors as ICEs.
That seems very unlikely. With an EV you can throw out the complex ICE management system, plus all the sensors to ensure that the component parts are working properly.
IIRC the shortage is more about two things. 1) The auto makers cancelled standing orders and are now in the back of the line for capacity reservations. 2) The chips the auto makers use are old tech and the chip makers want them to upgrade to newer tech.
https://www.motortrend.com/new… [motortrend.com]
EVs use twice as many semiconductors as ICEs.
EVs use twice as many semiconductors as ICEs.
And? Out of all the parts in an ICE car, the semiconductors are the most reliable components. Semiconductors are really amazing things because even consumer grade semiconductors can function continuously for decades before some of them begin to fail. Automotive qualified semiconductors are built to withstand some of the harshest environmental conditions that humans live in.
They do have twice as many semis on average but that’s because of all the other bullshit lumped in there, so it’s misleading. Every EV has all the shiny shit. Many ICEVs are still offered with only little bits of it. Electric motor control is way simpler than modern ICE control.
I would be surprised if the 80-90s cars had more complex engine control units than a modern EV, but the modern ones have a much harder job. They’ve got to monitor and react to a whole shedload of sensors, and make a guess at what’s h
which they won’t make. You could always import a 25yo Kei car/truck. [mitsuicoltd.com]
If I want a backup cam I can always look backwards. And there’s not much snow in California so traction control’s wasted money.
It doesn’t rain in California either? I guess that explains all the droughts.
Traction control harms snow performance, it however helps in rainy weather.
One of the first things you do around here when the road is snowy is turn off the traction control, as it will, if it is working properly, prevent your car from moving and overheat your brakes.
It doesn’t rain in California either?
It doesn’t rain in California either?
It rains a few times in the winter out here, but I’m not sure that extra few percent of traction three days a year is worth the added cost+complexity. But that’s just me/.
I’ts like getting air-conditioned seats in Alaska
If we used modern metallurgy with older design ethics to produce a wet sleeved straight six unit injected diesel with a six speed, double overdrive gearbox, you could likely meet emissions regs, get decent mileage, and have reasonably smooth operation with a fully mechanically regulated system. If you wanted to, you could literally design it to continue to run and even still shift if it’s an automatic even if the electrical system failed completely. But it would be seriously expensive to build it to last. Y
No AC, too
Pretty sure cars have had AC since the 40’s.
A very few cars had AC in the 40s.
My parents had a car in the 50s that had no air conditioning.
I bought a car in the 80s that had no air conditioning.
And if you count the car for which the air conditioning failed, which I basically only drove 2 miles each way to the train station and back, I had a car in the 2000s without air conditioning.
Cars started using chips in the 70s. You want to go back to that era? I think your memory is clouded by age or nostalgia.
Simpler, maybe. More resilient? No way. Engines and transmissions didn’t last nearly as long and those are really expensive to replace. Cars from the 70s lasted about 100k miles. They started rusting at 60k miles or before, so I hope you like replacing body panels. They had no ABS. No traction control. They weighed a ton and got awful gas mileage. Hope you like sucking in the lead from that gas. Airbags? Nope. Chances of dying in a wreck? Way higher. Regular tuneups and lube jobs are gonna cost you extra. No backup cameras. Forget anything beyond a standard FM radio.
Cars started using chips in the 70s. You want to go back to that era? I think your memory is clouded by age or nostalgia.
Simpler, maybe. More resilient? No way. Engines and transmissions didn’t last nearly as long and those are really expensive to replace. Cars from the 70s lasted about 100k miles. They started rusting at 60k miles or before, so I hope you like replacing body panels. They had no ABS. No traction control. They weighed a ton and got awful gas mileage. Hope you like sucking in the lead from that gas. Airbags? Nope. Chances of dying in a wreck? Way higher. Regular tuneups and lube jobs are gonna cost you extra. No backup cameras. Forget anything beyond a standard FM radio.
There’s not a huge amount of that list that requires on-board chips. The big one is probably ABS. Traction control and backup cameras are luxury items for 99% of drivers. And the radio is not what we’re talking about, but a plain FM radio sounds fine to me.
There’s not a huge amount of that list that requires on-board chips.
The world of chips brought in digital engine management computers. In the 70s, they were basic things, but even then they were far better than the old distributor and carburettor systems. Then it ushered in electronic fuel injection, and then you got both a stupid increase in power and fuel economy.
If you want to see what “the past” was like, go get a flight in a light GA aircraft like a Cessna or Piper. It may be a brand new plane right o
Traction control and backup cameras are luxury items for 99% of drivers
Backup cameras have been required equipment in the U.S. since 2018.
Traction control is about much more than maximum launch acceleration (or, perversely, getting some sick peel-out). It is a safety feature like ABS that drastically improves handling during slippery conditions (rain, snow, ice, mud).
There are lots of reasons that vehicle deaths per miles traveled [google.com] has steadily decreased over the decades. (It’s about 1/3 what it was before the advent of complicated electronics in cars in the 1970s.) It sure as hell isn’t because drivers have gotten better.
Traction control and backup cameras are luxury items for 99% of drivers
Backup cameras have been required equipment in the U.S. since 2018.
Traction control and backup cameras are luxury items for 99% of drivers
Backup cameras have been required equipment in the U.S. since 2018.
Really? How bizarre.
Traction control is about much more than maximum launch acceleration (or, perversely, getting some sick peel-out). It is a safety feature like ABS that drastically improves handling during slippery conditions (rain, snow, ice, mud).
Traction control is about much more than maximum launch acceleration (or, perversely, getting some sick peel-out). It is a safety feature like ABS that drastically improves handling during slippery conditions (rain, snow, ice, mud).
I didn’t think of the acceleration thing; I thought it was just for poor conditions.
But I’m still not seeing how chips stop panels rusting or make my (manual) gearbox more reliable.
Traction control and backup cameras are luxury items for 99% of drivers
Backup cameras have been required equipment in the U.S. since 2018.
Really? How bizarre.
Traction control and backup cameras are luxury items for 99% of drivers
Backup cameras have been required equipment in the U.S. since 2018.
Really? How bizarre.
They stopped many incidents of kids getting run over since they are generally shorter than the trunk lids on your normal car, and don’t have the wisdom to not run out behind a backing car.
Traction control is about much more than maximum launch acceleration (or, perversely, getting some sick peel-out). It is a safety feature like ABS that drastically improves handling during slippery conditions (rain, snow, ice, mud).
I didn’t think of the acceleration thing; I thought it was just for poor conditions.
Traction control is about much more than maximum launch acceleration (or, perversely, getting some sick peel-out). It is a safety feature like ABS that drastically improves handling during slippery conditions (rain, snow, ice, mud).
I didn’t think of the acceleration thing; I thought it was just for poor conditions.
Traction control also helps in emergency steering conditions, even on dry pavement, as it keeps your back end from skidding out when you hard steer.
make my (manual) gearbox more reliable.
make my (manual) gearbox more reliable.
Unfortunately, it is near impossible to get those in the US, there are a few still made, but they are extremely rare, and mostly sporty cars.
And the radio is not what we’re talking about, but a plain FM radio sounds fine to me.
FM radio is about the only thing I listen to in my car.
Don’t forget carburetors! Flooding, icing, poor winter performance, etc. No one really wants to go back to them.
You got one thing dead wrong, though. Cars in the 70s and 80s were at least a couple thousand pounds lighter than cars today (fewer impact protection structures), and by the 80s during the oil crisis they got fantastic mileage, even a little better than today with our modern heavy cars. Crash test standards have made our cars much heavier now, and despite more fuel-efficient engines, our mileag
Well, fair is fair, gpp stated: They weighed a ton, and nowadays they regularly weigh 2 tons and up. I did think it somewhat strange that there’d be complaints about the older cars being too light, but here we are…
Indeed. I would pay more money for a car that was simpler and more resilient.
Indeed. I would pay more money for a car that was simpler and more resilient.
Imagine having to use a metal key and go ’round all the doors using it every time you park.
Yeah, we know – you always leave yours unlocked, right? News: Those old cars were easy to hotwire so your “simpler and more resilient” car would be a target for thieves.
It wouldn’t be more resilient anyway. Mechanically-tuned engines were a pain in the ass, didn’t last as long, and needed constant attention.
Nostalgia isn’t what you think it is.
My mothers boyfriend had a kill switch hidden inside the car so that it couldn’t be stolen
Don’t rely on chips. Bring back older models that were decently efficient but which didn’t need chips. I would rather that my car NOT rely on a chip for anything.
Don’t rely on chips. Bring back older models that were decently efficient but which didn’t need chips. I would rather that my car NOT rely on a chip for anything.
Never going to happen. How are you going to make a backup camera and display without chips? Backup camera systems are mandated by gov’t regulations ever since 2018.
Similarly, how are you going to make electric vehicles without chips? Not gonna happen. With gas being super high and rabid climate change believers pushing everybody around, I fully expect the coming “solution” to the chip shortage will be halting production of internal combustion engine vehicles in favor of saving the chips for EV’s.
Similarly, how are you going to make electric vehicles without chips?
Similarly, how are you going to make electric vehicles without chips?
The original EVs date from before 1908. I’m pretty sure we could make them without chips. Though as Tesla shows, if you don’t depend upon dinosaur(relative) chip types, you can still get the chips necessary for full operation.
You have trouble with the last sentence, don’t you?
And no, a chipless EV is still possible without concerning the firefighters too much, you just have to get creative with the charge regulator. Given the voltages and amperages involved in regulating such a large battery, I’m sure a lot of the components are the opposite of “micro”.
Chip is cheap and easy, not the only way.
The original EVs date from before 1908. I’m pretty sure we could make them without chips.
The original EVs date from before 1908. I’m pretty sure we could make them without chips.
This was your statement. And it’s a really, really stupid one. The bit about Tesla is interesting, but if you are expecting to excuse your first statement with it, well, no. You said “I’m pretty sure we could make them without chips.” So let’s look at that. You have to monitor and control battery temp, cell balancing, charging curves (you can’t just shove power into them from 0% to 100%), monitor and control discharge rates, monitor and adjust charging and range for battery wear, oh, and report rate of cha
You can make an EV without chips. It can even do regen, series hybrid, whatever. But all of that depends on highly resilient batteries that can take abuse. Read: NOT LITHIUM CELLS. So yeah, you could make a really dumb EV today, but it would also be really shitty.
On the other hand, your average hobby motor speed control does regenerative braking and traction control, so the minimum complexity is not very high.
I have to point out that it isn’t charge controller chips that we’re having a shortage of. Even lithium cells aren’t that difficult to regulate.
Hell, I’ve watched some videos of the various EV and even a sort of hybrid car from Leno’s Garage. Turn of the 20th century(IE 1900’s), and it’s a sort of hybrid car. Caveats abound, of course. It works like a diesel-electric locomotive – the engine ran a generator that provided power to an electric motor that ran the drive shaft. It even had regenerative braki
I haven’t got any information on how acceleration and regen were controlled but the couple-gear trucks [wikimedia.org] had 4WD, 4WS, regen, and could be outfitted with a generator or not. I remember reading about one case where such a truck was used to bring freight down a hill, and did about 50% of the trip back up on its regen charge. They used hub motors, too (next to the hub anyway, with a gear reduction built in – the pinion is on the motor, and the spur gear is built into the wheel.)
Turn your head, look over your shoulder, and use your mirrors. These mandated things are for lazy people. Things like ABS, passive restraints, airbags, etc. are a given but we now have sensors in the bumpers and yet people still get run over; cameras that nobody looks at aren’t going to solve anything else.
My son has a new car that reminds him to check the back seat to make sure he hasn’t left his kid strapped in the car seat. We’ve nearly reached the “Beef Supreme” level of “Idiocracy.”
I’m buying all the B [youtube.com]
Don’t rely on chips. Bring back older models that were decently efficient but which didn’t need chips. I would rather that my car NOT rely on a chip for anything.
Don’t rely on chips. Bring back older models that were decently efficient but which didn’t need chips. I would rather that my car NOT rely on a chip for anything.
You will also have to go back to headlights with incandescent bulbs, a coil and manual points for the ignition, break out your timing light for setting your ignition timing, worry about the dwell time for your points, and manually gap your spark plugs because all those things won’t be handled by your electronic ignition anymore.
Forget Oxygen sensors, fuel injection, pre-tightening seat belts, air bags, and onboard diagnostics. Get ready for manual emissions checks again.
Nope, too many features, both vital
Just as importantly, a modern fossil fuel car could never meet emissions standards without chips in it to control the engine.
Eight valves in the engine, and eight in the radio.
Dr. Freeman, I presume.
Eight valves in the engine, and eight in the radio.
Eight valves in the engine, and eight in the radio.
In the USA we call them “tubes”. Ironically, most of the factories still making vacuum tubes are in Russia, which presents its own set of problems at the moment.
Besides, if we were going to go back to using discrete components, there’s always the slightly-less-old-school transistor [youtube.com].
In the USA we call them “tubes”.
In the USA we call them “tubes”.
Ah! So that’s what Al Gore was talking about.
In the USA we call them “tubes”.
In the USA we call them “tubes”.
Partially correct. They were called “tubes” when you referred to the package design, but were still knows as “valves” when you looked at schematics. Similar to calling something an IC chip for the package, but a full-wave rectifier when you refer to what it does.
Here is a schematic from Popular Electronics 1955 where they discuss how to build your own Theremin. They talk about the five “tubes” in the design, but the schematic lists them as V1 – V5. https://www.antiqueradio.org/p… [antiqueradio.org]
Here is an early explanation of the differences between valves and early transistors. [onlinesciencenotes.com]
This can’t happen. CAFE standards and other regulations pretty much require this. Yes, Russia was able to bring back an old Lada model, but… that is Russia. If VW brought back the old beetle or GM brought back the Corvair, the lawsuits would pile up in no time.
Aircooled engines had emissions issues. It wasn’t until the mid-70s that VW introduced a fuel injection system that could mitigate most of the emissions issues that were being regulated at the time. CAFE wasn’t the issue, it was things like NOX and unburned hydrocarbons that were the big problem. If you were to compare a VW bug from 1977 to 1970 it was astonishing what they put on the car to keep it legal. During those years there was a lot of creative engineering manifesting into things like air pumps, th
It should be possible as long as you don’t mind a less efficient engine or need safety features like airbags or anti lock brakes.
Don’t rely on chips. Bring back older models that were decently efficient but which didn’t need chips.
Don’t rely on chips. Bring back older models that were decently efficient but which didn’t need chips.
They would be unable to meet efficiency standards. Also, completely redesigning the cars to not use any chips is idiotic. All they need to do is redesign the part to use a different chip.
Your suggestion is asinine at best.
You cannot eliminate chips. That’s genuinely one step from saying we need to go back to horse-and-buggy days.
However, manufacturers could certainly rationalize and simplify their designs. Just as a small example: One option on a new car we are buying is to have a camera-and-screen combination in place of each of the side mirrors. The camera is in the position of the mirror (outside the car), and the screen is just inside the car. What possible benefit does this bring? Instead of your mirror icing up, it w
There are already many places making carburetors all over the world.
https://en.wikipedia.org/wiki/List_of_carburetor_manufacturers [wikipedia.org]
Don’t rely on chips. Bring back older models that were decently efficient but which didn’t need chips. I would rather that my car NOT rely on a chip for anything. Newer models require them, so maybe return to making some older “heritage” (to use a buzzword for old) models for folks who like to listen to “heritage” music. Do you like music from the 70’s? Now you can drive a car from then too!
Tooling up a vehicle manufacturing line costs on-the-order-of a Billion Dollars. That’s roughly equivalent to what
Don’t rely on chips. Bring back older models that were decently efficient but which didn’t need chips. I would rather that my car NOT rely on a chip for anything. Newer models require them, so maybe return to making some older “heritage” (to use a buzzword for old) models for folks who like to listen to “heritage” music. Do you like music from the 70’s? Now you can drive a car from then too!
Don’t rely on chips. Bring back older models that were decently efficient but which didn’t need chips. I would rather that my car NOT rely on a chip for anything. Newer models require them, so maybe return to making some older “heritage” (to use a buzzword for old) models for folks who like to listen to “heritage” music. Do you like music from the 70’s? Now you can drive a car from then too!
That would take years. No one makes ECU-less engines in that kind of volume. Or anything, any more. It would probably be 10 years before we could ramp up and re-tool the production of parts to make analog cars again, and that energy would be better spent actually solving the chip problem.
Well, that would mean to go back to 1960’s models.
Cars have had chips in them since the 1960s, so if they start making Rambler’s again, I’m in.
What car had ICs in the 1960s? An Apollo moon buggy?!
According to this [idgconnect.com], all sorts of cars starting in the late 60s. [chipsetc.com] It was for things like automatic transmissions and fuel injection.
1968, Volkswagon with their D-Jetronic, which was an electronically controlled fuel injection system.
Note that a “computer” doesn’t necessarily use chips. I only see discrete transistors in the D-Jetronic:
https://www.thesamba.com/vw/ga… [thesamba.com]
From the article: “Volkswagen introduces the first consumer vehicle available with a computer – a transistorized, electronically-controlled, fuel injection system.”
It sounds like a classic “Well, actchewally” kind of argument, but there are massive differences between a discrete transistor and an IC.
China, a larger car market than the US, is losing FEWER vehicles due to this shortage. Even though the same vehicles are made in the same way in both countries.
China, a larger car market than the US, is losing FEWER vehicles due to this shortage. Even though the same vehicles are made in the same way in both countries.
Incorrect. American car companies did this to themselves. When covid-19 hit, they shutdown production and cancelled their orders for chips because they don’t warehouse parts. However, when they opened up again and reordered their chips, they were at the back of the queue. To make things worse, TSMC started moving away from large fab processes because they aren’t as profitable. This caused a bit of a panic and everything getting bought up. The result is a long lead time to get the part they need while most warehouses have been cleared out. They could get around this by modifying their designs but the only car company that seemed to do this was Tesla. I don’t know what Chinese companies did but American car companies only have themselves to blame for have zero preparation for supply chain interruptions.
Just-In-Time manufacturing is cost efficient when it works and very expensive when it fails.
I believe there is some kind of industry-wide list of “approved” chips or something where the big car makers like GM and Ford and whatever the hell Chrysler is called these days wont use chips outside of that list and its difficult to get the newer more available chips on that list.
As I understand it, it isn’t so much that there’s an approved chip list, it’s that they don’t do the programming for most of their own car’s functionality, outsourcing that to a few contracting companies. Kind of like Bosch, Denso, and such.
Given their requirements, said contracting companies don’t upgrade their parts, to include the computer chips, all that often. Plus, the old chips were known to work, met durability requirements(not that new chips can’t, but it has to be tested), and were cheap.
They could get around this by modifying their designs but the only car company that seemed to do this was Tesla.
They could get around this by modifying their designs but the only car company that seemed to do this was Tesla.
As I understand it, Tesla never cut production(or purchasing) by all that much, and were using newer chips in the first place. Plus, because they have extensive in-house programming abilities, basically programming their own cars from the ground up themselves, they were indeed able to “make things work” for what chips they couldn’t get.
Just-In-Time manufacturing is cost efficient when it works and very expensive when it fails.
Just-In-Time manufacturing is cost efficient when it works and very expensive when it fails.
JIT manufacturing is fine, but the problem is that the American car companies took the JIT idea that Toyota pioneered, and implemented it wrong: they made it “completely inventory-less manufacturing.” The proper implementation includes inventory for things like chips that have huge lead times on orders, or take time to switch manufacturers.
What a wonderful way to reduce the supply of cars so that Americans can be weaned from their dependence on them.
What a wonderful way to reduce the supply of cars so that Americans can be weaned from their dependence on them.
What a wonderful way to reduce the supply of cars so that Americans can be weaned from their dependence on them.
More likely they will just drive older cars for now.
are Infineon Aurix (TriCore) chips. These are mostly 20+ year old technology for vehicles with electrical systems based on the AUTOSAR stack. The automotive industry has collectively refused to move beyond this stack despite its inability to scale effectively for the demands of modern cars. There really isn’t anything these chips are doing that cannot be done with ASIL certified lockstep ARM chips, but the investment in AUTOSAR makes it a huge pain for these companies to rework their development methods and electrical architectures. They also don’t have the right kind of software engineers to handle such a transition.
Makes me wonder if some of the older fabs like NXP/Freescale/Motorola could be retooled to handle this type of work. We don’t need the latest and greatest stuff TSMC is belting out. Relegate these older CPUs to older fabs, and then maybe have the government kick automakers in the tush to see about making a standard chip for this replacement that can be done cheaply, with a high supply that can be warehoused if need be.
What would really be nice is a SoC that could be used for cars, but other projects as we
AUTOSAR – ugh. It’s a terribly over-complicated morass of expensive middleware, with thousands of pages of specifications. I know why OEMS like it – the box claims to make things super drop-in compatible.
The reality is you spend as much time “configuring” the AUTOSAR components as you would have spent writing custom code that is more efficient and actually does what you want instead of almost doing what you want and being forced to work around the accidental complexity.
That said – is it really the Infineo
Infineon recently made a process change and realized they fouled six months worth of production.
From what I’ve heard it’s a wide range of chips, particularly the older models built with larger feature sizes.
Apparently when the fabs lost a bunch of orders at the beginning of the pandemic several of them decided to take the opportunity to upgrade their assembly lines to newer, more profitable technology (=smaller feature sizes). Technology that can’t actually make the older chips, which would have to be redesigned to deliver the same robustness with smaller features (car electrical systems are hideousl
If the issue is that the process technology used to produce these old chips is disappearing as manufacturers focus on newer nodes, why not produce new chips that are compatible with the old chips (same pin-out, same functionality, same instruction set/software) but are built on process nodes that companies will actually fab?
I find this a little odd based on what I’m seeing in the computer parts market. Prices are coming down, availability is better. New products are being introduced. Heck, Steam Decks are flowing out like a river now. No, I’m not a supply chain czar, just my $.02 from what I’m seeing in the US.
There has certainly been talk about building additional 45nm or even 65nm capacity. The cost of such a fab would probably be comparable with one or two EUV patterning machines. But margins on these older chips are razor thin so it’s difficult to see how any such build would be profitable once the current backlog has been cleared. The new fab would be competing with producers who have no capital depreciation and have spent a decade optimising their process to squeeze every last die from their equipment.
A bet
There may be more comments in this discussion. Without JavaScript enabled, you might want to turn on Classic Discussion System in your preferences instead.
VR Is As Good As Psychedelics At Helping People Reach Transcendence
Climate Change Can Make Most Human Diseases Worse
Experience varies directly with equipment ruined.
Music producer heading to Orlando in search of next big boy band – Bungalower
Bungalower
Covering Orlando's Bungalow Neighborhoods
Songwriter and producer Anthony Little is in search of the next big boy band and he’s hoping Orlando is the place to find them.
“My desire is to create a new boyband from the Orlando area and break them on a worldwide level. Much like *NSYNC and Backstreet Boys. I am confident creating a repeat boyband out of Orlando will bring tremendous visibility to the area.”
The former Saint Pete resident, who has worked with Justin Timberlake, the Backstreet Boys, N’Sync, and more, told Bungalower that he will be headed to Orlando on August 27th and 28th to audition male singers between the ages of 12-21 at the Dr. Phillips Center for the Performing Arts.
Chosen candidates will begin recording and rehearsing immediately after signing with the first single scheduled to be released within just three months of signing a production agreement. Candidates must live or be willing to relocate to the Orlando area.
Click HERE for more information on Backstage.com or HERE on Little’s website.
The story of Orlando’s last boy band Godfather, Lou Pearlman, didn’t end well so here’s hoping this goes well.
Editor in Chief of Bungalower.com More by Brendan O'Connor
This site uses Akismet to reduce spam. Learn how your comment data is processed.
China to begin series of unprecedented live-fire drills off Taiwan coast – The Guardian
Island accuses Beijing of planning to breach sovereign territory in wake of controversial visit by Nancy Pelosi
China is to begin a series of unprecedented live-fire drills that would effectively blockade the island of Taiwan, just hours after the departure of US House speaker, Nancy Pelosi, whose controversial visit this week has sparked fears of a crisis in the Taiwan strait.
Taiwan has characterised the drills, which will last until Sunday afternoon – and will include missile tests and other “military operations” as close as nine miles to Taiwan’s coastline – as a violation of international law.
While China’s military often holds live-fire exercises in the strait and surrounding seas, those planned for this week encircle Taiwan’s main island and target areas within its territorial sea.
Ahead of the drill, it said 27 Chinese warplanes had entered its air defence identification zone, including flights over the median line – the unofficial border in the Taiwan strait. On Wednesday night two suspected drones flew over Taiwan’s outlying Kinmen Island, with Taiwan’s military firing flares in response.
Pelosi arrived in Taipei on Tuesday night under intense global scrutiny, and was met by the foreign minister Joseph Wu and the US representative in Taiwan, Sandra Oudkirk.
She addressed Taiwan’s parliament on Wednesday before having public and private meetings with the president, Tsai Ing-wen.
“Our delegation came to Taiwan to make unequivocally clear we will not abandon Taiwan, and we are proud of our enduring friendship,” Pelosi said on Wednesday, when she was given Taiwan’s highest civilian order by Tsai.
She said US solidarity with Taiwan was “crucial” in facing an increasingly authoritarian China.
In a later statement, she said China could not prevent world leaders from travelling to Taiwan “to pay respect to its flourishing democracy”.
As Pelosi’s plane took off from Songshan airport on Wednesday evening, Wu waved goodbye from the tarmac. But as the American left, Taiwan was facing days of military activity which threaten to escalate into a fourth Taiwan strait crisis.
Taiwan’s defence ministry accused Beijing of planning to violate the international convention on the law of sea, by breaching Taiwan’s sovereign territory.
Veerle Nouwens, a senior research fellow at the Royal United Services Institute, a London-based thinktank, said the location of the six exclusion zones was noteworthy.
“In particular, the exclusion zones appear to no longer be focused on China’s coastline, but rather encircle Taiwan,” she said, adding that China has a different interpretation as to which laws apply to what it considers its own maritime zones.
Taiwanese authorities have said the proximity to some major ports combined with orders for all aircraft and sea vessels to steer clear of the area amount to a blockade.
China on Wednesday also expanded its trade suspensions on Taiwan to include additional agriculture products, following a ban on imports earlier in the week from more than 100 Taiwanese food companies. China is Taiwan’s largest trading partner.
Taipei has remained defiant in its rhetoric. Tsai said on Wednesday that Taiwan “will not back down” in the face of heightened military threats, and would “do whatever it takes to maintain Taiwan’s peace and stability”. Beijing said its drills were “necessary and just”.
Beijing’s latest drills are being closely followed by Taiwan, the US and other regional powers, said Nouwens.
“The US will be looking for the PLA’s [People’s Liberation Army’s] use of conventional missiles in their inventory – eg, will China conduct anti-ship ballistic missile tests or use air-launched and ship-launched variants of ASBMs?
“They will also be paying attention to the types of exercises – eg, whether, how often and how far the PLA cross over the median line, which they did today … crossing well over the median line.
“Finally, they’ll also be seeking to get a better sense of the PLA’s coordination between air and maritime forces, particularly given the various scenarios that they’ve highlighted they will be exercising for.”
Across the region, there is a growing sense of uncertainty, with the exercises having also upset regional neighbours. Japanese analysts said the northern drills were also a clear warning to their government about islands over which Tokyo and Beijing both claim ownership.
“Those plans show that the Sakishima Islands, including Yonaguni, Ishigaki, and Miyako, could be affected by People’s Liberation Army operations as they assume the PLA is operating to the east of Taiwan,” Tetsuo Kotani, a professor of global studies at Meikai University, told the Japan Times.
China’s ruling Communist party government, which regards Taiwan as its territory despite it having never ruled the island, has repeatedly warned of retaliation for the visit.
On Tuesday night, China’s vice-foreign minister, Xie Feng, “urgently summoned” the US ambassador, Nicholas Burns, to lodge stern representations. China’s ambassador to the UK, Zheng Zeguang, also warned that “those who play with fire will get burned”.
Pelosi’s flight took a non-direct path from Kuala Lumpur, with a detour over Indonesia and the Philippines, avoiding the South China Sea, to fly into Taiwan. There had been concerns that China might send PLA aircraft to intercept or tail her plane into Taiwanese airspace.
There are also fears of an escalation in cyberwarfare and disinformation. In 7-Eleven stores across Taiwan on Wednesday, the message “Warmonger Pelosi get out of Taiwan” flashed across in-store TV screens.
According to local reports, some customers thought the message was a statement of the views of the 7-Eleven franchise owner. But Uni-president, the parent company, told local media it suspected it had been hacked.
Shortly before Pelosi’s arrival, Chinese state media reported that Beijing’s Su-35 fighter jets were flying across the Taiwan strait. Taipei subsequently dismissed the announcement as “fake news”.
Pelosi earlier said China was making “a big fuss” about this visit because of her status as speaker of the US House of Representatives. “I don’t know if that’s a reason or an excuse,” she said, adding: “Whatever China will do, they will do in their own good time.”
Additional reporting by Chi Hui Lin
The Horrors’ Tom Furse on how AI will revolutionise music production – Audio Media International
Founder member of The Horrors, synth polymath and passionate enthusiast for all things AI, Tom Furse spoke to us recently, and predicted how machine learning will re-define art in all its forms, he also admitted a growing hunger for innovation when it comes to music technology…
“Why go anywhere when you can go anywhere?” laughs Tom Furse, The Horrors’ inventive co-founder and creative journeyman tell us, when asked about his recent swing away from live performing. Aside from his continuing role as a The Horrors’ principal sonic architect, Tom’s individual exploits have brought two deep solo records, and a burgeoning passion for AI.
Using his own system to manufacture dense visuals, like those in his recent video for HAAi’s Baby We’re Ascending, as well as his ‘Relics’ series of generative art pieces. Furse explained to us how he foresees similar mind-blowing AI innovations eventually re-drawing the music technology landscape. But first, we asked Tom about his recent departure from performing live with The Horrors…
AMI: Last year you announced you weren’t going to be touring with The Horrors anymore, in your Instagram post you mentioned that you’re more of a ‘creator’ than a performer. Had that been an issue for a while for you, the need to write not marrying with being on the road?
Tom Furse: Yeah, it absolutely had been an issue for quite some time. Just because it’s such a different environment when you’re on the road. It’s great for all kinds of reasons, but if what you really want to do is make stuff, there’s pitfalls. It’s just really hard to find a quiet spot. I’d spend a lot of time with headphones on in noisy environments. I wasn’t always happy on tour. When Covid hit it was a bit of a lightbulb moment.
AMI: But of course, you are still a member of The Horrors, and you’re working on album six?
TF: Yeah, that’s slowly happening, we’re chipping away!
AMI: Your own career beyond The Horrors has been pretty varied, one of the things that has been interesting recently is your use of AI in your visual art and videos, not least the Baby We’re Ascending video you did with HAAi. AI seems like it’s quite a big area for you right now. How long have you been working with AI and what first attracted you to it?
TF: I’ve been using it for the last year. I just heard about it online, and I’d seen examples of [AI-generated visual art] and thought it was pretty cool. Then I heard an episode of the Interdependence podcast with Holly Herndon and Mat Dryhurst that really got me interested. I heard about an approach that married image synthesis with natural language input control. I really wanted to give it a go. So I did. It required the navigation of a virtual coding environment, it wasn’t like a nice easy user interface. It was a little bit tricky. But, I just started messing around with it and I haven’t stopped since.
After doing more of less the same thing with music for the past 15 years or so, this was like a much needed breath of fresh air – an entirely new medium that was much less explored than music. I think music is thirsty for new technology and sounds, and new places to go. I don’t think we’ve had that for quite a long time.
I’ve always loved exploring the element of surprise in music, with generative approaches. But, that’s more an illusion of surprise. This is much more strange and psychedelic. It’s quite something.

AMI: Have you used generative and AI-based approaches in music before?
Tom Furse: No, not really because they don’t really exist yet. I went looking for it, and everything I found was pretty wanting to be honest. The processes I’ve used before have been based on logic and maths systems. You can set quite complex patterns, but it’s in reality a very simple computer, ones-and-zeroes approach. It’s not really intelligent but it is fun. It’s what Brian Eno’s been doing for decades, he’s done some of the most interesting work in that area. But we need new stuff – we can’t be Brian Eno all the time!
AMI: Do you think that we’ve only seen the tip of the iceberg really with what AI can do, particularly in music production?
TF: Oh, God, yeah. It’s a hard thing to capture because I think historically what people have been trying to do is train AI on like MIDI files, but they don’t necessarily convey what is interesting or *good* about the songs. Or, the style of a song or a sound. It’s not terrible data but it’s quite raw data. It doesn’t really capture the essence of stuff, which is what the visual art-aimed AI approaches do.
With what Holly Herndon and Mat Dryhurst are up to, where they have captured the essence of Holly’s voice with Holly+ – there you can drag an audio file into it and a very good approximation of Holly’s voice will sing it. With the latest version you can’t tell the difference between her voice and the synthesised version. So, there we’re getting into some really interesting territory. The lines are going to get so blurred.
One of the best-selling vocal albums of 2026 or 2027 will probably be made not using a real vocalist. People will start making things like Chet Baker techno records. Whatever the maddest thing you can imagine will be possible. We’re seeing this already with image synthesis. People will be mashing up stuff. If you think about how postmodern culture is now, we’re all really primed for this.
I think that’s more how entertainment will go. Giving the type of AI technology that we’re currently seeing in visual art to musicians is going to be wild, beautiful, scary and psychedelic. I can’t wait. But, there’ll undoubtedly be a lot of pushback.
AMI: Then you’ve got the other side of the AI-paradigm; platforms like AIVA and Amper which can manufacture tailor-made soundtracks using AI, what are your thoughts on that side of things?
Tom Furse: I mean, I’ve heard them and I think it’s almost like the equivalent of Dall-E. When I first saw that I suspected that a certain kind of illustrator might not have as much work, and that might also be the case here. I feel that I have a slightly savage opinion on it. My heart says, maybe everyone needs to try a little harder – why do people settle for this kind of mediocrity? I don’t enjoy it, when I’m watching a film, if there’s just a really vanilla score there, I don’t enjoy making that kind of music when I’ve done library projects before, I just feel like we should be rewarding bolder experiments.
This is perhaps a wake-up call for everyone. If you’re worried then you’re really saying you’re as much of a skilled craftsman as the AI is, but then the art is somewhere lost in there.
Having done a few films, I do understand that it is a very cutthroat industry, and music is such a tiny consideration when people are budgeting. It’s really undervalued, so it doesn’t surprise me that people are seizing on the chance to undervalue it more. I think a better AI solution would be a system that enabled their samples to sound more realistically like a certain style…

AMI: Well, there are quite a few string sample libraries out there that are pretty indiscernible from the real thing…
TF: They’re great, and I do use string sample libraries but the lengths you have to go to to make them sound natural is often quite extreme. I’ve been recording some live strings recently and there really is such a huge difference. It sounds very convincing, but when you get the real articulation and expression from a real player, that hasn’t been beaten yet.
I think you have a lot more scope to do that if you’re synthesising out of nothing – rather than trying to construct recorded samples to play in this natural way. But that’s not there yet. I think that side of the industry will be able to realise a lot more, with a lot less. It’s going to be pretty wild.
AMI: Do you have a similar stance on synths, are you averse to soft synths and prefer the real deal?
Tom Furse: No, I’m synth-neutral. At first you could kind of tell there was a difference, but it’s harder to discern now. I use Arturia’s stuff quite a lot. There’s loads of great Max for Live developers doing interesting synths, there’s so much good stuff happening. I do think we’ve reached a little bit of a plateau in terms of synth methods and sounds.
When I first started buying synths around 2007/2008, there wasn’t really anyone making any good new analogue synths, but now you can get a Behringer TD-3 for under £100. The accessibility is there now, we’ve conquered that particular mountain but where can we go from here?
AMI: How many synths are in your studio right now, or is that a silly question?
TF: Like ten I think, I definitely used to have a lot more, but I’m slimming down a little bit. I’ve got an Arturia Polybrute, and that’s a really amazing workhorse. I realised there’s lots of things I didn’t need anymore. I’ve kind of gone for a more efficient set-up.
AMI: Your second solo album, Ecstatic Meditations was quite a blissful record. Do you intend to continue making music in that vein?
TF: At the moment, it’s more a question of time. I’m just quite busy with a lot of projects that are more visual based. I am doing a bit of music but it’s really nice to have a break for a little bit. I’ve got a piano downstairs and I’ll sit and play something, realise I’m on to something but then might not chase it – But I know that ideas are still there. I used to chase it relentlessly. When your identity is wrapped up in this niche of creativity, it’s good to have a rest and explore something else. When I do come back to make music, it feels more focused. Less like a job.
I also feel like I’m preparing myself for what will be an exciting new wave of music technology. I feel like this investment of time is a very positive thing right now.
Tom Furse: Well, I’m working on another video for HAAi right now, then I’m finishing up some artwork for Temples. I’ve got a record of mine I’ve mixed with Ghost Culture that’s sounding cool so I’m going to get to that when I have a bit more time. Yeah, my current situation is that I wake up in the morning and I think ‘Right, what am I going to make today?’ Things are pretty open.
Follow Tom’s artistic and musical adventures over at tomfurse.com
Studio,News
Top Stories,News
Studio,News
Business,Live,News
Studio,News
Business,News
Top Stories,News,Music Industry
News,Music Industry
Business,News
Top Stories,News
Business,Live,News
Live,News
News
Studio,News
Business,News
Top Stories,News
Top Stories,News
Business,News
News
Top Stories,Opinion,Business,News
Get the latest News, Reviews and more in your inbox.
*indicates required fields
Please tick below to confirm you accept our Terms and Conditions >
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
© Copyright Audio Media International Limited. All rights reserved. Talk to our Partnerships Team > Talk to the Editorial Team >
By using this website you agree to our Terms and Conditions, Privacy and Cookie Policies.
A. Introduction
1. The privacy of our website visitors is very important to us, and we are committed to safeguarding it. This policy explains what we will do with your personal information.
2. Consenting to our use of cookies in accordance with the terms of this policy when you first visit our website permits us to use cookies every time you visit our website.
B. The following types of personal information may be collected, stored, and used:
1. information about your computer including your IP address, geographical location, browser type and version, and operating system;
2. information about your visits to and use of this website including the referral source, length of visit, page views, and website navigation paths;
3. information, such as your email address, that you enter when you register with our website;
4. information that you enter when you create a profile on our website—for example, your name, profile pictures, gender, birthday, relationship status, interests and hobbies, educational details, and employment details;
5. information, such as your name and email address, that you enter in order to set up subscriptions to our emails and/or newsletters;
6. information that you enter while using the services on our website;
7. information that is generated while using our website, including when, how often, and under what circumstances you use it;
8. information relating to anything you purchase, services you use, or transactions you make through our website, which includes your name, address, telephone number, email address, and credit card details;
9. information that you post to our website with the intention of publishing it on the internet, which includes your username, profile pictures, and the content of your posts;
10. information contained in any communications that you send to us by email or through our website, including its communication content and metadata;
11. any other personal information that you send to us.
Before you disclose to us the personal information of another person, you must obtain that person’s consent to both the disclosure and the processing of that personal information in accordance with this policy
D. Using your personal information
Personal information submitted to us through our website will be used for the purposes specified in this policy or on the relevant pages of the website. We may use your personal information for the following:
1. administering our website and business;
2. personalizing our website for you;
3. enabling your use of the services available on our website;
4. sending you goods purchased through our website;
5. supplying services purchased through our website;
6. sending statements, invoices, and payment reminders to you, and collecting payments from you;
7. sending you non-marketing commercial communications;
8. sending you email notifications that you have specifically requested;
9. sending you our email newsletter, if you have requested it (you can inform us at any time if you no longer require the newsletter);
10. sending you marketing communications relating to our business or the businesses of carefully-selected third parties which we think may be of interest to you, by post or, where you have specifically agreed to this, by email or similar technology (you can inform us at any time if you no longer require marketing communications);
11. providing third parties with statistical information about our users (but those third parties will not be able to identify any individual user from that information);
12. dealing with inquiries and complaints made by or about you relating to our website;
13. keeping our website secure and prevent fraud;
14. verifying compliance with the terms and conditions governing the use of our website (including monitoring private messages sent through our website private messaging service); and other uses.
15. Other Uses
If you submit personal information for publication on our website, we will publish and otherwise use that information in accordance with the license you grant to us.
Your privacy settings can be used to limit the publication of your information on our website and can be adjusted using privacy controls on the website.
We will not, without your express consent, supply your personal information to any third party for their or any other third party’s direct marketing.
E. Disclosing personal information
We may disclose your personal information to any of our employees, officers, insurers, professional advisers, agents, suppliers, or subcontractors as reasonably necessary for the purposes set out in this policy.
We may disclose your personal information to any member of our group of companies (this means our subsidiaries, our ultimate holding company and all its subsidiaries) as reasonably necessary for the purposes set out in this policy.
We may disclose your personal information:
1. to the extent that we are required to do so by law;
2. in connection with any ongoing or prospective legal proceedings;
3. in order to establish, exercise, or defend our legal rights (including providing information to others for the purposes of fraud prevention and reducing credit risk);
4. to the purchaser (or prospective purchaser) of any business or asset that we are (or are contemplating) selling; and
5. to any person who we reasonably believe may apply to a court or other competent authority for disclosure of that personal information where, in our reasonable opinion, such court or authority would be reasonably likely to order disclosure of that personal information.
Except as provided in this policy, we will not provide your personal information to third parties.
F. International data transfers
1. Information that we collect may be stored, processed in, and transferred between any of the countries in which we operate in order to enable us to use the information in accordance with this policy.
2. Information that we collect may be transferred to the following countries which do not have data protection laws equivalent to those in force in the European Economic Area: the United States of America, Russia, Japan, China, and India.
3. Personal information that you publish on our website or submit for publication on our website may be available, via the internet, around the world. We cannot prevent the use or misuse of such information by others.
4. You expressly agree to the transfers of personal information described in this Section F.
G. Retaining personal information
1. This Section G sets out our data retention policies and procedure, which are designed to help ensure that we comply with our legal obligations regarding the retention and deletion of personal information.
2. Personal information that we process for any purpose or purposes shall not be kept for longer than is necessary for that purpose or those purposes.
3. Notwithstanding the other provisions of this Section G, we will retain documents (including electronic documents) containing personal data:
1. to the extent that we are required to do so by law;
2. if we believe that the documents may be relevant to any ongoing or prospective legal proceedings; and
3. in order to establish, exercise, or defend our legal rights (including providing information to others for the purposes of fraud prevention and reducing credit risk).
H. Security of your personal information
1. We will take reasonable technical and organizational precautions to prevent the loss, misuse, or alteration of your personal information.
2. We will store all the personal information you provide on our secure (password- and firewall-protected) servers.
3. All electronic financial transactions entered into through our website will be protected by encryption technology.
4. You acknowledge that the transmission of information over the internet is inherently insecure, and we cannot guarantee the security of data sent over the internet.
5. You are responsible for keeping the password you use for accessing our website confidential; we will not ask you for your password (except when you log in to our website).
I. Amendments
We may update this policy from time to time by publishing a new version on our website. You should check this page occasionally to ensure you understand any changes to this policy. We may notify you of changes to this policy by email or through the private messaging system on our website.
J. Your rights
You may instruct us to provide you with any personal information we hold about you; provision of such information will be subject to the following:
1. the payment of a fee
We may withhold personal information that you request to the extent permitted by law.
You may instruct us at any time not to process your personal information for marketing purposes.
In practice, you will usually either expressly agree in advance to our use of your personal information for marketing purposes, or we will provide you with an opportunity to opt out of the use of your personal information for marketing purposes.
K. Third party websites
Our website includes hyperlinks to, and details of, third party websites. We have no control over, and are not responsible for, the privacy policies and practices of third parties. This text was provided by Website Planet.
L. Updating information
Please let us know if the personal information that we hold about you needs to be corrected or updated.
M. Cookies
Our website uses cookies. A cookie is a file containing an identifier (a string of letters and numbers) that is sent by a web server to a web browser and is stored by the browser. The identifier is then sent back to the server each time the browser requests a page from the server. Cookies may be either “persistent” cookies or “session” cookies: a persistent cookie will be stored by a web browser and will remain valid until its set expiry date, unless deleted by the user before the expiry date; a session cookie, on the other hand, will expire at the end of the user session, when the web browser is closed. Cookies do not typically contain any information that personally
identifies a user, but personal information that we store about you may be linked to the information stored in and obtained from cookies.
1. The names of the cookies that we use on our website, and the purposes for which they are used, are set out below:
1. we use Google Analytics and Adwords on our website to recognize a computer.
2. Most browsers allow you to refuse to accept cookies—for example:
1. in Internet Explorer (version 10) you can block cookies using the cookie handling override settings available by clicking “Tools,” “Internet Options,” “Privacy,” and then “Advanced”;
2. in Firefox (version 24) you can block all cookies by clicking “Tools,” “Options,” “Privacy,” selecting “Use custom settings for history” from the drop-down menu, and unticking “Accept cookies from sites”; and
3. in Chrome (version 29), you can block all cookies by accessing the “Customize and control” menu, and clicking “Settings,” “Show advanced settings,” and “Content settings,” and then selecting “Block sites from setting any data” under the “Cookies” heading.
Blocking all cookies will have a negative impact upon the usability of many websites. If you block cookies, you will not be able to use all the features on our website.
3. You can delete cookies already stored on your computer—for example:
1. in Internet Explorer (version 10), you must manually delete cookie files
2. in Firefox (version 24), you can delete cookies by clicking “Tools,” “Options,” and “Privacy”, then selecting “Use custom settings for history”, clicking “Show Cookies,” and then clicking “Remove All Cookies”; and
3. in Chrome (version 29), you can delete all cookies by accessing the “Customize and control” menu, and clicking “Settings,” “Show advanced settings,” and “Clear browsing data,” and then selecting “Delete cookies and other site and plug-in data” before clicking “Clear browsing data.”
New festival, CURRENTS, to take place in abandoned power plant near Berlin – DJ Mag
CURRENTS claims to be one of the first 100% carbon-neutral electronic music and performance festivals
A new electronic music festival, CURRENTS, is set to take place in an abandoned power plant south of Berlin on Saturday 8th October.
CURRENTS has been curated by Romanian music production and DJ duo Khidja, the line-up includes artists such as Suzanne Ciani, Lena Willikens (who will perform with Marylou), Dopplereffekt and Alicia Carrera.
The one-day event will run from 3pm to 1am and is located at the former E-WERK Luckenwalde, which was originally built in 1913 as a coal power station and closed down in 1989. In September 2019, Performance Electrics transformed the building into a renewable Kunststrom power station and contemporary art centre.
CURRENTS, which claims to be one of the first 100% carbon-neutral electronic music and performance festivals, will be powered by burning locally sourced waste wood chips to generate electricity.
The festival is a non-profit event with funds going to support “an international community of artists and cultural workers existentially threatened by climate change, pandemics, wars, displacement and economic inequality”.
Find out more via CURRENTS here and see the full lineup below. Tickets can be picked up from here.
Thrust Publishing Ltd, Unit 3, 30-40 Underwood Street, London, N1 7JQ, United Kingdom. Tel: +44(0)7940488008
Doug Howard Announces Retirement as Dean of Curb College of Entertainment and Music Business – Williamson Source
Doug Howard, a longtime music industry executive, recently announced his retirement as dean of Belmont University’s Mike Curb College of Entertainment & Music Business, effective Aug. 31. Howard, who has held the role of dean since January 2015, is a proud Belmont alumnus and a shining example of the entertainment industry success the Curb College fosters.
Belmont President Dr. Greg Jones said, “This news is certainly bittersweet. Doug Howard has always represented this University well as an alum, serving as a transformational leader during his decades in the music business. For the past seven years, he brought that same passion, energy and creativity to developing students who can forge their own paths in a variety of entertainment and media ventures. I’m grateful for his service and his leadership and wish him all the best in a well-deserved retirement.”
The former senior vice president of A&R for Lyric Street Records/Walt Disney Company, Howard graduated from Belmont College in 1979 before receiving an MBA from Vanderbilt University and JD from the George Washington University School of Law in Washington, D.C. His history in the Nashville music scene began as a song plugger and studio manager for the Welk Music Group. Following law school, Howard served as vice president and general manager for PolyGram Music Publishing for five years before becoming the senior vice president of A&R for Disney owned Lyric Street Records. In addition, he served as senior vice president and general manager for Disney Music Publishing/Nashville.
His tenure as Curb College dean has been marked by the college’s significant growth, a deepening of industry connections, the opening of a state-of-the-art facility and consistent national acclaim. Through the generosity of Mike and Linda Curb and the Curb Family Foundation, the presence of the Curb College has continued to grow on Nashville’s famed Music Row through facilities like the Quonset Hut and Columbia Studio A (34 Music Square East). Thanks to an in kind Curb Family Foundation donation, these historic spaces—the birthplace of countless legendary hits from artists such Bob Dylan, Loretta Lynn, Brenda Lee, Johnny Cash, Buddy Holly and more—now serve as a resource and inspiration for a new generation of industry leaders. Music production and audio engineering students are able to gain hands-on experience in the classic recording studios, and the 34 Music Square East facility also houses Curb College’s renowned songwriter program, which is celebrating its 15th year.
Consistently recognized by Billboard and Variety as one of the top schools in the country for music business and film studies, the Curb College has grown from just under 2,000 students to more than 2,500 during Howard’s tenure, while moving into the $87 million Milton & Denice Johnson Center. The building boasts $3.6 million in technology resources and specialized equipment to serve students majoring in Curb College fields: audio engineering technology, creative & entertainment industries, emerging media, film & TV writing, journalism, media production, music business, songwriting, motion pictures and publishing. Of particular note, the facility is equipped with Dolby Atmos Rendering Unit (Dolby RMU) that allows faculty to teach the process of creating and compiling movies in full Dolby Digital, 7.1 and the Atmos DCP formats. Belmont’s Motion Pictures program was the first university-based film program in the country capable of not only showing commercial films, but also teaching the process of developing and producing theater-ready films in the Atmos format.
“Since I first walked across campus in the fall of 1975 to interview with music business program founder Bob Mulloy, I have loved Belmont, and I will always love Belmont,” Howard said. “While I’m excited and ready for this next phase of life, I must express how grateful I am for the support I received from Belmont’s senior leaders and share my sincere appreciation for the great work of our amazing faculty and staff. Their combined efforts have allowed the Curb College to provide world-class programs for our students and to build upon the strong foundation created by Mr. Mulloy and so many others across the university.”
Howard will continue to maintain his Belmont ties by returning to serve as a member of the Curb College Advisory Board this fall.
Belmont Interim Provost Dr. David Gregory added, “As dean of the Curb College, Doug has continuously demonstrated his commitment to our students by providing them exceptional learning experiences in and out of the classroom. He achieved this through tireless support of his faculty and staff, while his deep connections and strong reputation in the industry opened doors to tremendous opportunities for the entire college. I’m thankful to call him a colleague and friend. The good news for us is this isn’t a goodbye—rather, we’re grateful his impact will still be felt through his contributions to the Curb College Advisory Board.”
Dr. Sarita Stewart, associate professor of creative & entertainment industries, has agreed to serve as the interim dean for the Curb College as Belmont launches a national search this fall for Howard’s successor.
The Master Is Returning — Have We Kept the Light on for Him? – National Catholic Register
EWTN News, Inc. is the world’s largest Catholic news organization, comprised of television, radio, print and digital media outlets, dedicated to reporting the truth in light of the Gospel and the Catholic Church.
Get 6 Free Issues!
SCRIPTURES & ART: Our Lord is coming back, but we don’t know when. Are we giving a faithful account of our service?
Motel 6 used to end its commercials with the line, “We’ll leave the light on for you.” Tom Bodett’s folksy phrase evoked a feeling of home: when you’re tired, you’ve been driving a long time, your eyes are bleary and maybe it’s raining, it makes you feel good to see a light in the distance that marks home … at least for the night.
Today’s Gospel alludes to that. A master has gone away on a journey, leaving his servants in charge of his property. They are to keep the house in order, see that his assets are safe and his resources used responsibly. Those servants should keep thieves away and be honest themselves about what’s been put in their charge. In one sense, they should feel like what their master has left them with is their own, not to abuse but to use, to use wisely. One can even imagine that trusting master putting some money in each servant’s hand just in case, and to see what he does with it — though that’s another parable.
You might say, “that’s a pretty trusting master.” You might even think he’s a bit too trusting, a tad naïve, maybe even a bit of a sucker.
But this master and these servants have something of a relationship. Who knows how long they’ve been together? There is some measure of trust.
Those servants are you and me.
Did you ever consider the magnitude of God’s trust given man in creation? Man is made in God’s image and likeness. Man is blessed with fertility, which means he shares co-creatively with God in his work of filling this world with other persons, other images of God, and man’s given dominion over the world (See Genesis 1:26-30).
I want to dwell on that notion of dominion, because I fear it is misunderstood and undermined in our world today.
God gave the newly-created human person two shares in his creative work. The superior share is to participate in God’s work of creating other human persons, other images of God. With God who takes the initiative — for only God can create a soul — man and woman are privileged in their communion of persons to share in his creative work. That is why the refusal to do so is in a very real sense sacrilege.
God also gave the newly created human person dominion over the world. The world is not finished. God gave man trees but man might need a table and a chair. Getting from tree to table is why God gave man a brain: to be creative in using the things of the world for his good. God gave man the very atoms of the world, which he could use responsibly to “keep the lights on for you” or irresponsibly to annihilate humanity.
Human dominion does not mean human abuse. Man is a steward, not a master.
But we are losing the notion of human dominion today. Basic Genesis truths — the male/female differentiation as divinely willed, human fertility as God’s first blessing, dominion over the world — are being replaced by what are honestly pagan approaches to these questions. Sure, some people might sprinkle a little holy water on them and dress them up in religious language, but the fundamental truth of human dominion is that there is a qualitative difference between the human person and the rest of the material creation. To blur that distinction is to dishonor God’s creation and to do violence to man.
But we do blur it. We blur it when we pretend that the human person is just another part of the “ecosystem” (and one with an inordinately heavy carbon footprint at that).
We blur it when we put human beings and non-human species on the same level. Just last June, lawyers lost a case in the New York State Court of Appeals, the state’s highest court, trying to claim habeas corpus rights for the Bronx Zoo’s elephant. And we blur that line when we refuse new human guests at the banquet of life in the name of “the earth.”
Just as the servants in Jesus’ parable, God has entrusted enormous responsibilities to us as human beings. He trusts us because he offers us a relationship: sonship in the Son. But with it comes responsibility: “Much will be required of the one entrusted with much” (Luke 12:48).
The servant does not strictly have a right to be praised for doing his job: that he fulfills his master’s instructions is what he is supposed to do. But Jesus does call him “blessed” for “doing” his master’s will.
Today’s Gospel is illustrated by Jan Luyken as it appears in the Bowyer Bible. We’ve met both before. Luyken was a Dutch engraver who lived in the second half of the 17th century and produced a prodigious amount of religious engravings for Protestant books. The Bowyer Bible was a project begun in 1791 in England by Protestant publisher Robert Bowyer to present an illustrated version of the Bible. Subsequent editions undertaken by Bowyer’s successors grew to 45 volumes profusely illustrated.
Today’s engraving depicts the servants. The subtitle on the illustration is wrong — it should read Luke 12 (not 13), verses 41-48. (There are no such versions in Luke 13).
The master has just returned. We see a servant through the doorway taking care of his horse he has just dismounted (though I am not sure horses were frequently encountered in ancient Israel). The master has entered his door. His faithful servant is showing him that the house is in good order. The master’s expression appears to signify satisfaction. Two dogs wander underfoot. Their calm demeanor clearly indicates this man belongs here, that he is their master, and they too welcome him home. Given that the dog is a symbol of devotedness, it reinforces the faithful servant’s constancy as well.
In the background are other servants at table, apparently receiving their “food allowance at the proper time” (Luke 12:42). A faithful servant is at table, passing around a platter of food and also looks at the newly arrived master. Clearly, proper stewardship of the master’s goods — used but not abused — is taking place.
The “Master’s return” is clearly eschatological. The “true” Master who is to return is Jesus Christ in his Second Coming, a return “like a thief in the night” against whom the faithful servant is to keep watch (a key Advent theme). It’s known the Master is coming back, but we don’t know when.
The same is true of us, in our stewardship of creation both in terms of other human persons and of the non-human world. The Master is coming back, but we don’t know when. Are we giving a faithful account of our service? Are we ready to show with pride the proper care we’ve exercised, like the faithful servant in today’s illustration?
We are supposed to be the “light of the world” (Matthew 5:14-16). If the Master is on his way, the question is: have we kept the light on for him?
John Grondelski John M. Grondelski (Ph.D., Fordham) is former associate dean of the School of Theology, Seton Hall University, South Orange, New Jersey. He is especially interested in moral theology and the thought of John Paul II. [Note: All views expressed in his National Catholic Register contributions are exclusively the author’s.]
Our Lord Jesus Christ, King of the Universe, is an omniscient and loving God. Accept no immanent substitutes.
“From the Incarnation to the Ascension, the life of the Word incarnate is surrounded by the adoration and service of angels. … They will be present at Christ’s return, which they will announce, to serve at his judgment.” [CCC 333]
We do not know the Last Day. But we do know that we must prepare for Christ’s glorious return every day by our fidelity to the work of his grace within our hearts. That is enough for us.
“Things fall apart; the centre cannot hold … Mere anarchy is loosed upon the world”
No one was inside the church during the time of the fire and the pastor safely removed the Holy Eucharist from the building, the diocese said.
The Best In Catholic Blogging
Earlier this summer the Vatican announced that Pope Francis wants to reorient how the Catholic Church does marriage formation. In a 97-page document, the Vatican provides a new “catechumenal itinerary toward matrimonial life.” What is that? We find out with Register Staff Writer Peter Jesserer Smith. Then our Register Intern Hannah Cote highlights some new ways Catholic couples are honoring the Blessed Virgin Mary in their wedding ceremonies.
True Stories of Courageous Christians Living Their Faith in Muslim Lands
The Best In Catholic Blogging
True Stories of Courageous Christians Living Their Faith in Muslim Lands
‘He made them the vicars of his love.’ —St. Ambrose of Milan
Among all possible names given to God, the most proper of all is ‘He Who Is’
Copyright © 2022 EWTN News, Inc. All rights reserved. EIN 27-4581132
Reproduction of material from this website without written permission, or unlicensed commercial use or monetization of National Catholic Register RSS feeds is strictly prohibited.
Subscriber Service CenterAlready a subscriber? Renew or manage your subscription here.
SubscribeStart your Register subscription today.
Sign up for 6 Free IssuesTry us out with a free trial subscription.
Give a Gift SubscriptionBless friends, family or clergy with a gift of the Register.
Order Bulk SubscriptionsGet a discount on 6 or more copies sent to your parish, organization or school.
Sign-up for E-NewsletterGet Register Updates sent daily or weeklyto your inbox.
Two new ventures to open in Station Square – Rocky Mount Telegram
Partly cloudy skies. Low 74F. Winds SW at 5 to 10 mph..
Partly cloudy skies. Low 74F. Winds SW at 5 to 10 mph.
Updated: August 9, 2022 @ 5:32 pm
Tierra Norwood stands outside Rec Room, which is officially opening Monday as a co-working space.
Tierra Norwood stands inside Rec Room, which is officially opening Monday as a place for co-working space in the Station Square business and professional complex downtown.
Shown here is the future Studio One at Station Square in the Station Square business and professional complex downtown.
Tierra Norwood stands outside Rec Room, which is officially opening Monday as a co-working space.
Tierra Norwood stands inside Rec Room, which is officially opening Monday as a place for co-working space in the Station Square business and professional complex downtown.
Shown here is the future Studio One at Station Square in the Station Square business and professional complex downtown.
The Station Square business and professional complex downtown is going to be the home of a place for co-working space, called Rec Room, and a place for people to do podcasting, called Studio One at Station Square.
Rec Room, which is being led by Tierra Norwood, will officially open on Monday. Studio One will be opening very soon next door and will be led by Adria Jervay.
Norwood is known in the Twin Counties because she served for a time as the City of Rocky Mount’s downtown development coordinator and as director of the Small Business Center at Nash Community College.
Norwood, while she was with NCC, appeared on “The Mayor’s Brief,” which is a series in which Mayor Sandy Roberson interviews officials, leaders and people of interest in the community on camera and posts those interviews on YouTube.
Norwood also presently owns Ajons Professional Solutions, which is a marketing business.
Norwood is working with Station Square’s Ben Braddock to try to introduce something different to the community.
On the website wework.com, co-working space is defined as an environment designed to accommodate people from different businesses who come to do work, with a co-working space characterized by shared facilities, services and tools.
“Of course, we already have co-working spaces here at Station Square, but hopefully with the Rec Room, we can get more activity and more people utilizing co-working spaces,” Norwood said.
Norwood spoke of hoping to be able to offer many partnerships with local resources to have ongoing events, but she also made clear the plans are for Rec Room to have its own events as well.
She also made clear Rec Room does not really want to compete with other entities that are already doing business training.
She said what Rec Room instead plans to do is to have small business training in a format of about 30 to 45 minutes of lectures and learning, followed by question-and-answer sessions and networking.
Asked who came up with the idea for Rec Room and how Norwood ended up becoming the person in charge, she said Braddock.
“So we wanted to do a co-working concept for several years here at Station Square,” Braddock said. “We have shared meeting rooms and conference rooms, but not co-working space the way most people understand co-working space.
“And we had the space here in the building that we wanted to use it for,” he said. “And so we started the renovations and then as I was finishing the renovations, I sent Tierra a message and I said, ‘Hey, we’re looking for a partner to operate the co-working space that we’re opening at Station Square.’
“And she jumped right on it,” he said.
Norwood said Rec Room is seeking people from two types of demographics.
“One is the business professional, including the remote workers. If you’re a remote worker and you’re thinking about co-working, then we would definitely say: Why not come to Rec Room?” Norwood said.
Norwood emphasized that Rec Room offers 24/7 access to high-speed internet and the chance to mingle and collaborate with people in other businesses.
“And then for the entrepreneurs, you have a lot of people with home-based businesses now, a lot of people operating e-commerce-based businesses. And this gives them a space outside of their home, outside of their bedroom, away from the kids,” she said. “So this will allow for those entrepreneurs to get out of the house and really focus on their business, while networking and introducing themselves as entrepreneurs and small business owners to others.”
The term e-commerce is a reference to commercial transactions conducted electronically via the internet.
As for the cost, Norwood said membership is $70 a month, with a three-month minimum.
Norwood also said members will be able to hold private events, at a limit of two hours and with a reservation required two weeks in advance.
As for Studio One, Jervay said that the studio presently is set up for one-person-at-a-time podcasting and that she is waiting for one more piece of equipment to arrive.
Jervay said the studio, once complete, will be set up for four people to be able to do podcasting at a time.
Jervay said the fee system is multi-tiered based on what type of equipment a person needs to use. She said a person wanting to use a single microphone in the studio to do podcasting would pay $35 per hour.
Jervay said people would reserve space via Station Square for the usage of the studio.
Jervay is an entrepreneur and also is the publisher of The Carolinian, which is an 82-year-old newspaper based in Raleigh that serves the African-American community in the Piedmont area of the state.
Jervay said she came up with the idea to have a place for people to do podcasting when she started frequenting Rocky Mount and seeing all of the potential for business the city has right now.
“One of the things that I noticed was that there was no podcasting studio here,” she said. “We have several in the Triangle, but there was none here.”
She said for a city that wants to continue to grow and get the word out, “What better megaphone than podcasting?”
She also made clear she believes the studio would give people the chance to reach out and say, “Hey, this is what we do here.”
www.RockyMountTelegram.com
1151 Falls Road Suite 2008
Rocky Mount, NC 27804
Main Phone: 252-446-5161
Customer Care Phone: 252-329-9505
Sorry, an error occurred.
Sign up with
Thank you .
Your account has been registered, and you are now logged in.
Check your email for details.
Invalid password or account does not exist
Sign in with
Submitting this form below will send a message to your email with a link to change your password.
An email message containing instructions on how to reset your password has been sent to the e-mail address listed on your account.
Secure & Encrypted
Secure transaction. Cancel anytime.
Thank you.
Your purchase was successful, and you are now logged in.
A receipt was sent to your email.
Frank Hoffman: Happy 45th Birthday, Vermont Public Radio – vtdigger.org
By
This commentary is by Frank Hoffman, who produces audio and video content for various channels and is a fundraising consultant for nonprofits across the country. He lives at the base of Mount Ascutney, where he enjoys VPR’s strong HD signal from the mountaintop.
I know, I know, my favorite radio network is now called Vermont Public. Whether you like the branding change or not, we Vermonters need to feel proud of the many achievements this small statewide network has achieved in the last 45 years.
It is a time for celebration and personal recollection for me. VPR signed on the air on Aug. 13, 1977. I was one of the original staffers and enjoyed every minute of my seven years there. Well, almost every minute. What I remember can certainly be disputed, but even though I may not make it to the 50-year party, I can be thankful for my beginnings at VPR, which helped me throughout my professional life.
You’ll never miss a story with our daily headlines in your inbox.
As I ponder my personal celebration of this startup, I have high admiration for the people who saw that the state needed public radio and did something about it. Vermont Public TV had been on the air since 1967, and was already firmly established in the Vermont tapestry, even though for many people in southern Vermont, picking it up off air was a challenge.
The plan was that VPR was not going to be affiliated with Vermont PBS (until now), or with the University of Vermont, or the state, like many public radio stations are in this country. VPR was a “community licensee,” which carried with it the burden of raising the money needed to pay the bills and comply with FCC regulations. Hats off to the founders who had the guts and vision to bring VPR to the Green Mountains.
Qualifying for federal grant money through the Corporation for Public Broadcasting was the only way to go, and the founders were able to be part of the CPB Expansion Program. The NPR system was in a growth spurt.
I admit that getting this position at VPR was sheer luck. I was living in New York, working at the American Place Theater and workshopping a play of mine. Weekends I would escape back to my home in Tunbridge, usually by Amtrak. I wanted to be in NYC, but I really wanted to be able to work and live in Vermont.
My girlfriend at the time had clipped an ad from a newspaper that said, “Radio Producers Wanted.” I don’t think I knew what a producer was but applied anyway. I was registered with the Vermont Council on the Arts as a playwright, and the two advertised positions would be funded through the council and a Comprehensive Employment and Training Act grant. There was part of the act set aside for artists, and I think that this is how the funding happened to get producers for VPR. I’ll never forget Fonda Siegel at the council who was able to make this happen.
I applied for the position of “spoken word producer,” but at my interview I was told that position had been filled, but did I know how to read music? asked Betty Smith, the program director, who interviewed me while Ray Dilley, one of the founders and the general manager, sat back and listened. I told Betty that I read music, had played in my high school orchestra, a rock band or two, and loved music — all kinds! She nodded. Ray had picked up a call, and I thanked them both and walked out from what was my very first interview for any kind of job other than restaurant work and carpentry.
The following week I got a call from Betty saying that I got the job. All I could say was, “You picked me?” I couldn’t believe it. Later on, I learned that I was the last one on the list of interviewees of some 200 applicants for the two CETA positions. The spoken word producer hired was Frank Anthony, a poet and writer who lived in Chelsea. We made plans to commute to Windsor in Frank’s VW every day to begin our new jobs.
We had voice training, breathing exercises, and electronic training on how to run the board, tape recorders, cartridge machines, and how to read a log and deal with traffic: Tapes coming in and going out. I had the best training at VPR from Steve Robinson, the development director at the time, who had years of radio experience. He also loved pitching during the fundraising marathons and taught me a great deal that served me at the other stations where I worked.
The first show on the air I believe was the British import “The Goon Show,” followed by “Saturday Afternoon at the Opera.” You need to know that this was pre-satellite, so the programs were either sent through the mail on reel-to-reel tapes or were being fed on phone lines. “All Things Considered” and “Morning Edition” came to us that way until satellite connections happened in 1980.
I was on the air weekdays from 7 until 10 p.m., playing the few classical music recordings in the library. Oh, how I butchered the classical names of the composers and the European conductors. I didn’t know enough to be embarrassed. Steve would be listening at home and in his gentle way would educate me on the correct pronunciations. Learning by doing seemed to be how this training was going to develop.
What really sounded the best was live programming from Windsor Studios. This was not really like community radio, where producers bring to the air what they like — folks, blues, jazz, classical, poetry. We were trained to follow format, and VPR was a classical station. LPs sounded great through the new system on radios at home and in cars.
To me, this was the best job going, though the annual salary was about $8,000. There was earned vacation time, but no retirement packages. Ah, yes, the good ole days in broadcasting. It was a great time to be at VPR because there was some freedom. Freedom of ideas, or developing concepts, or taking a risk or two.
The first collaboration with NPR brought producers to Windsor to help train us in how to tell a story in audio terms. “Maple Syrup” was the first half-hour special that “All Things Considered” ran. But there were others.
I produced “Portrait of a Rural Symphony” with the Vermont Symphony Orchestra performing Aaron Copland’s “Fanfare for the Common Man” with Gov. Richard Snelling narrating. This was at Hopkins Center in Hanover, New Hampshire, and Maestro Copland was in attendance. Deborah Amos and Fred Calland worked with me to get this 15-minute piece on the network.
I also produced a two-hour special for Folk Festival USA on Canadian traditional music, and there were numerous collaborations with WGBH in Boston producing music from the White Mountains Music Festival with Gerard Schwarz and Gunther Schuller.
I also produced short features on the Jose Orozco Murals at Dartmouth and contributed performance recordings of Vermonters and visiting musicians to the long-defunct program “The Sunday Show.” And let’s not forget Midsummer, Vermont’s first statewide folk festival at Shelburne Farms.
This was just some of the work that was done in the early years that led to seven grants from the National Endowment for the Arts for my audio productions. I also served on the review panel for radio production.
After 45 years, I think it is appropriate to remember how small beginnings grow into larger opportunities. I know this was the case for me. After VPR, I went on to raise $250,000 to produce, market and host a weekly program called “U.S. Ear: The New Music Review.” This magazine program brought to the air electronic music, performance art, found-sound, criticism and commentary using a group of independent producers across the country. It won a Corporation for Public Broadcasting award for programming “innovation and audio excellence.” I met my co-producer, David Moss, a vocalist/percussionist from Marlboro who played in the VPR studios in Windsor.
There were many firsts in that studio, including the first live broadcast of the Synclavier, an electronic keyboard instrument developed by composer and electronic music pioneer Jon Appleton. I can’t forget to mention a performance on my Friday afternoon program, “Audio Files for the Compleat Eclectic,” by Allen Ginsberg and Peter Orlovsky. They sang tunes from Ginsberg’s “Birdbrain” album, read some poems, and took calls from the audience.
I was an independent producer for three years and then went on to join my old friend and mentor, Steve Robinson, in Lincoln, Nebraska, to be the assistant network manager of Nebraska Public Radio. The network was just a few years old and did some local programming, including a nightly news program. I was able to be a manager but kept my hand in producing. I won three Associated Press awards, a Gabriel Award for a series of features on child abuse and incest, and created a 12-part series of Willa Cather’s “My Antonia.”
I pitched Steve on breaking format and playing the programs back-to-back with a few musical interludes and station breaks, of course. He said yes and we had a memorable Dec. 7, 1994, radio event. Steve went on to do many of these specials at the Nebraska Public Radio Network.
I went on to be general manager of the statewide radio network in West Virginia, producers of the nationally syndicated “Mountain Stage.” Steve went on to have a stellar career as the CEO and president of WFMT in Chicago. The irony is that Ray Dilley, our old boss at Vermont Public Radio, eventually took Steve’s position at the Nebraska Public Radio Network. He passed away in Lincoln.
The second irony is that Scott Finn, the current CEO of Vermont Public (VPR and Vermont PBS), was the CEO and executive director of West Virginia Public Broadcasting, where I was the general manager of radio for five years.
I am happy that VPR has thrived for the last 45 years. In my time with public radio, creativity was key, and it was not always easy to be heard. Sound quality was also essential.
Now it seems anyone who can speak can have a podcast. Delivery of content has changed in the last four and one-half decades, and that is a good thing. I believe it’s also good to celebrate the past when appropriate and learn from one’s mistakes.
VPR gave me so much. I know the network continues and will continue to produce and deliver many creative, unique, stories. Radio succeeds in giving the listener a way to connect personally to issues and to other people. Ideas are in the air and it’s up to us to reach out and grab them and make them into radio programs, what else?
Our journalism is made possible by member donations. If you value what we do, please contribute and help keep this vital resource accessible to all.
VTDigger.org publishes 12 to 18 commentaries a week from a broad range of community sources. All commentaries must include the author’s first and last name, town of residence and a brief biography, including affiliations with political parties, lobbying or special interest groups. Authors are limited to one commentary published per month from February through May; the rest of the year, the limit is two per month, space permitting. The minimum length is 400 words, and the maximum is 850 words. We require commenters to cite sources for quotations and on a case-by-case basis we ask writers to back up assertions. We do not have the resources to fact check commentaries and reserve the right to reject opinions for matters of taste and inaccuracy. We do not publish commentaries that are endorsements of political candidates. Commentaries are voices from the community and do not represent VTDigger in any way. Please send your commentary to Tom Kearney, [email protected]
Email: [email protected]
View all Commentaries
VTDigger is now accepting letters to the editor. For information about our guidelines, and access to the letter form, please click here.
More obituaries
Don’t miss the best of VTDigger
By
By
By
More commentary
By
By
By
More politics