Blog

These are the 10 best places to live in the world – Condé Nast Traveller

These are the 10 best places to live in the world  Condé Nast Traveller
source

Direct constraint control for EM-based miniaturization of microwave passives | Scientific Reports – Nature.com

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 13320 (2022)
Metrics details
Handling constraints imposed on physical dimensions of microwave circuits has become an important design consideration over the recent years. It is primarily fostered by the needs of emerging application areas such as 5G mobile communications, internet of things, or wearable/implantable devices. The size of conventional passive components is determined by the guided wavelength, and its reduction requires topological modifications, e.g., transmission line folding, or utilization of compact cells capitalizing on the slow-wave phenomenon. The resulting miniaturized structures are geometrically complex and typically exhibit strong cross coupling effects, which cannot be adequately accounted for by analytical or equivalent network models. Consequently, electromagnetic (EM)-driven parameter tuning is necessary, which is computationally expensive. When the primary objective is size reduction, the optimization task becomes far more challenging due to the presence of constraints related to electrical performance figures (bandwidth, power split ratio, etc.), which are all costly to evaluate. A popular solution approach is to utilize penalty functions. Therein, possible violations of constraints degrade the primary objective, thereby enforcing their satisfaction. Yet, the appropriate setup of penalty coefficients is a non-trivial problem by itself, and is often associated to extra computational expenses. In this work, we propose an explicit approach to constraint handling, which is combined with the trust-region gradient-search procedure. In our technique, the decision about the adjustment of the search radius is determined based on the reliability of rendering the feasible region boundary by linear approximation models of the constraints. Comprehensive numerical experiments conducted using three miniaturized coupler structures demonstrate superiority of the presented method over the penalty function paradigm. Apart from the efficacy, its appealing features include algorithmic simplicity, and no need for tailoring the procedure for a particular circuit to be optimized.
One of the important considerations in the design of modern high-frequency circuits and systems is miniaturization. Small size has become a prerequisite for a growing number of application areas that include mobile communications1, wearable2 and implantable devices3, internet of things4, medical imaging5, or energy harvesting6. Physical dimensions of conventional microwave passive components are related to the guided wavelength, which make them unsuitable for space-limited applications, except for structures implemented on high-permittivity substrates. In the context of circuit architecture, size reduction can be achieved by various means, including transmission line (TL) folding7,8, replacement of conventional TLs by compact microstrip resonant cells (CMRCs)9 capitalizing on slow-wave phenomenon10, as well as the employment of various geometrical modifications (e.g., defected ground structures11, slots12, stubs13, shorting pins14, substrate integrated waveguides15, etc.). The aforementioned techniques generally lead to complex, and often densely arranged layouts. The presence of electromagnetic (EM) cross-coupling effects within these structures makes the traditional characterization methods (analytical or equivalent network models) inadequate. Instead, reliable evaluation of miniaturized circuit has to rely on full-wave EM simulation tools.
Appropriate selection of the circuit architecture is only the first step of rendering a high-performance design. In order to achieve the smallest possible size while satisfying requirements imposed on the electrical parameters (allocation of operating frequencies, bandwidth, power split ratio, phase response), geometry parameters of the circuit have to be carefully tuned. Given multi-dimensional parameter spaces along with the necessity of handling several objectives and constraints, the parameter adjustment process needs to resort to rigorous numerical optimization algorithms16,17. At the same time, EM-driven optimization is computationally expensive: even local (e.g., gradient-based18 or derivative-free19) procedures may require many dozens of EM analyses, whereas tasks such as global search20, multi-objective design21, or uncertainty quantification22, are far costlier. Not surprisingly, the literature is replete with acceleration methods23,24,25,26,27. These include utilization of adjoint sensitivities28 or sparse Jacobian updates29 to expedite gradient-based procedures, the employment of dedicated solvers30, and, more and more popular, surrogate-based procedures31. The latter may employ data-driven (or approximation-based)32,33, and physics-based metamodels34, but also machine learning frameworks35. The latter are often combined with sequential sampling methodologies36 for iterative construction and refinement of the models. Some of popular approximation-based modelling methods in the context of EM-driven optimization include kriging37, Gaussian process regression38, neural networks in many variations (e.g.,39,40,41), support vector machines42, polynomial chaos expansion43. Physics-based metamodels are most often constructed using space mapping44, and response correction methods (e.g., adaptive response scaling45, manifold mapping46, etc.).
When it comes to EM-driven size reduction, a potentially high-cost of the process is only one of the challenges. The major issue is to control the constraints. As circuit miniaturization is generally detrimental to electrical performance figures, any practical design has to be a trade-off between achieving a possibly compact size and fulfilment of specifications imposed on the circuit characteristics. The latter are often expressed in terms of acceptance levels for return loss, bandwidth, power split, etc., over the frequency bands of interest. In mathematical terms, these conditions are essentially constraints. Their evaluation is computationally-heavy due to the involvement of EM analysis. Consequently, straightforward constraint handling is inconvenient. A widely used alternative is to incorporate penalty functions47, in which the main objective (size reduction) is supplemented with a linear combination of appropriately quantified constraint violations48. The advantage of this approach is problem reformulation, so that it becomes a formally unconstrained endeavor. Yet, the efficacy of optimization dependent on the setup of the proportionality factors of the aforementioned linear combination (referred to as penalty coefficients). Tailoring their values to a specific structure is non-trivial and typically requires execution of test runs, contributing to the overall computational cost of the process.
This paper discusses a novel methodology for simulation-driven miniaturization of microwave passive components. Our approach employs explicit handling of design constraints, which are approximated—in any given iteration of the optimization process—by their linear approximation models. The quality of this approximation, in particular the predictions concerning solution feasibility, are verified upon generating a new solution, and used to govern the decision-making process that controls the search radius within the trust-region procedure being the main optimization algorithm. The decision-making factors include the feasibility status of the current design, as well as the amount of constraint violation improvement (of the lack thereof). Furthermore, the tolerance levels for constraint violations are gradually tightened in the course of the optimization process, governed by its convergence indicators. The proposed constraint handling method is simple to implement and does not require any setup of control parameters (as opposed to penalty coefficients within the penalty function approach). It is validated using three structures of miniaturized rat-race and branch-line couplers with the constraints imposed on the circuit bandwidth and power split ratio. The obtained results are benchmarked against the penalty function techniques. We demonstrate that the presented procedure allows for a precise control over constraints, as well as for achieving competitive miniaturization rates. Perhaps its most appealing feature is that it does not have to be tuned to any specific circuit at hand.
Here, we introduce the procedure for miniaturization of microwave components proposed in this work. “Simulation-based size reduction: problem formulation” provides the formulation of the miniaturization task. In “Explicit constraint handling: the concept”, we discuss the concept of direct control of CPU-heavy constraints within trust-region gradient-based algorithm. The technical details of controlling the tolerance levels for constraint violation as well as decision-making process that adjusts search radius are elaborated on in “Explicit constraint handling: constraint-related gain ratios”. Finally, “Explicit constraint handling: optimization algorithm” summarizes the entire procedure.
We denote by x = [x1 ⋯ xn]T a vector of adjustable parameters of the circuit under design. For passive components, these are normally geometry parameters (circuit dimensions). Let A(x) be the circuit size, e.g., its footprint area. The objective is to reduce the size as much as possible, i.e., to solve
where x* is the optimum parameter vector to be identified, whereas U(x) is the objective function. In the case of miniaturization, we have U(x) = A(x). The problem (Eq. 1) is subject to constraint, which can be of
or equality type
In this work, we will only consider inequality constraints, which are the most common. Also, an equality constraint ηk(x) = 0 can be represented in an inequality form as |ηk(x)|≤ 0.
Let us consider an example of a microwave coupler, which is to be miniaturized while satisfying the following conditions.
The power split ratio |S31(x,f) − S21(x,f)| is zero at f = f0 (the operating frequency);
The matching and isolation characteristics are supposed to satisfy |S11(x,f)| ≤ − 20 dB, and |S41(x,f)| ≤ − 20 dB for f ∈ F, where F is a frequency range of interest (intended circuit bandwidth).
These conditions can be formulated as constraints γ1(x) ≤ 0 and γ2(x) ≤ 0, with γ1(x) =||S31(x,f) − S21(x,f)||, and γ2(x) = max{f ∈ F: max{|S11(x,f)|, |S41(x,f)|}} + 20.
Thus, for the exemplary coupler, we may formulate the miniaturization task as
subject to constraints
For the sake of illustration, let us consider another example of an optimization task, which is but oriented towards improving selected electrical performance figures rather than size reduction. Assume that the goal is to minimize the maximum reflection within the frequency range of interest of an impedance matching transformer. In this case, the merit function is defined as
In Eq. (7), |S11(x,f)| stands for the circuit reflection, whereas F refers to the frequency range of interest.
Evaluation of constraints imposed on electrical characteristics of microwave components is computationally expensive: their values are obtained by post-processing EM simulation data. This is troublesome from the point of view of numerical optimization procedures, as local methods typically require constraint gradients. Unless adjoint sensitivities are available49, estimation of these requires finite differentiation, and the constraints may not be differentiable due to their very formulation as minimax functions (cf. “Simulation-based size reduction: problem formulation”). Also, EM simulation results may contain a certain level of numerical noise, being a result of adaptive meshing techniques, or specific termination criteria used by the EM solvers. As mentioned before, a common mitigation method is a penalty function approach47, where the cost function is defined through aggregation of the main objective (size reduction) and contributions from constraint violations, appropriately scaled using weighting factors (penalty coefficients). Although conceptually attractive, optimum setup of the coefficient values is generally an intricate task, often associated with preparatory optimization runs.
This paper offers an alternative approach to constraint handling, which is an explicit method. It employs linear approximation models of the system response, therefore, a natural choice for the underlying optimization algorithm is the trust-region (TR) framework50. The standard TR procedure yields a series of approximate solutions x(i), i = 0, 1, …, that converge to x*. The new vector x(i+1) is obtained by solving
where UL(i) is a first-order Taylor model of the scalar merit function U. The solution to Eq. (8) is restricted to the vicinity of x(i) determined by the size parameter δ(i). Additionally, we have inequality constraints of the form of Eq. (2); equality constraints are not considered for the sake of simplicity, cf. “Simulation-based size reduction: problem formulation”. The TR radius δ(i) is adaptively adjusted using the standard TR rules (e.g.50).
The problem (Eq. 8) is solved using Matlab’s fmincon algorithm, which implements the Sequential Quadratic Programming (SQP) procedure, one of the state-of-the-art procedures for constrained continuous optimization. The SQP procedure directly handles geometry constraints (here, the TR condition ||x − x(i)|| ≤ δ(i)), whereas the constraints related to electrical performance figures are controlled using the explicit approach being the subject of this paper. The details are explained in the remaining part of this section.
If size reduction is of interest, the evaluation of the merit function incurs negligible costs: the structure size can be obtained directly from the system geometry parameters, i.e., the vector x. On the other hand, maintaining solution feasibility becomes problematic due to expensive constraints. In this work, constraint control is achieved by the incorporation of linearized models γL.k of the constraints γk, k = 1, …, nγ, and adaptive adjustment of the trust-region size parameter δ(i). The decision-making process governing the latter involves quantification of the reliability of γL.k in predicting the feasibility status in the course of the optimization process.
In the following, we will denote as r(x) the vector of EM-simulated outputs (e.g., S-parameters) of the circuit of interest. A first-order Taylor model rL(i)(x) of the response r(x), established at the design x(i), is defined
where the Jacobian matrix of the component response at the design x(i) is denoted as J(x(i)). In most cases, it is estimated by means of finite differentiation. For the purpose of subsequent considerations, we will explicitly indicate that the constraints are functions of the circuit characteristics, i.e., we have γk = γk(r(x)). Then, the linear model γL.k is defined as
When solving the trust-region sub-problem (Eq. 2), the exact constraints γk(r(x)) will be replaced by their linearized versions (Eq. 10). The accuracy of representing γk by γL.k depends on a particular location in the parameter space and on the trust-region size parameter δ(i), which is because ||γk(r(x)) − γL.k(x)|| is proportional to ||x − x(i)||2 (for sufficiently small design relocations). Consequently, a proper updating procedure for δ(i) is essential. In particular, maintaining small values of the TR radius improves the alignment between γL.k(x) and γk(r(x)), whereas increasing it allows for increased-size steps in the design space while solving (Eq. 8). The adjustment of δ(i) should take into account the solution feasibility predictions according to γL.k(x), but also the actual feasibility status (as verified by EM simulation). At the generic level, the adaptation scheme is arranged the same way as for conventional TR algorithms50, i.e.,
In Eq. (11), the coefficients minc and mdec are used for incrementing and decrementing the TR region size, respectively, whereas θinc and θdec represent appropriate threshold. In our approach, we employ their typical values, i.e., we have minc = 2 and minc = 3, as well as θinc = 0.75 and θdec = 0.2550. As mentioned earlier, these are the typical values used in the TR algorithms. According to classical theory (e.g.50), the specific values of coefficients are not critical for the algorithm operation.
However, the decision-making factor θ in Eq. (11) is the gain ratio pertinent to the constraints. It compares the actual alteration of constraint violations to those predicted by the linear model for subsequent iterations (specifically, the (i + 1)th versus the ith one). The modification coefficients as well as the thresholds in Eq. (11) mimic the conventional rules of the TR frameworks (cf.51).
In the case of multiple constraints, the coefficient ρ is generalized to account for the worst-case situation over the entire set gk, k = 1, …, ng. We have
Definition of the factors θk for each γk(x), k = 1, …, nγ, is pivotal to the successful operation of the proposed optimization procedure. It will be discussed at length in the next section.
This section elaborates on the definition and evaluation of the constraint-based gain ratios θk, utilized to control the trust region size as discussed in “Explicit constraint handling: the concept”. In the following, we will denote by Γk(i) the threshold for accepting the violation of γk(x) at the iteration i. The threshold is iteration dependent for the reasons explained at the end of the section. At this point, we will outline the rules for computing the ratios θk utilized in decision-making process that governs the search radius adjustments:
Rule 1: If γk(r(x(i))) > Γk(i), i.e., the constraint violation before executing the (i + 1)th iteration exceeds the acceptance threshold, then
Rule 2: If γk(x(i)) ≤ Γk(i), i.e., the constraint violation is at the acceptable level, then
Rule 3: If θk < 0 (as computed using Eqs. (13) or (14)) but γk(r(x(i+1))) ≤ Γk(i), i.e., EM-evaluated constraint violation is acceptable, then the value of θk is overwritten to θk = 0.5.
The above rules serve for two purposes. On the one hand, one needs to impose penalty on insufficient prediction accuracy of γL.k if the constraint violation is large (Rule 1), or the feasibility condition has not been improved in the case of minor constraint infringement (Rule 2). On the other hand, the conditions (Eqs. 13 and 14) are employed to promote sufficient prediction of γk by γL.k (cf. Eq. (13)), or relocation of the design towards the feasible region (cf. Eq. (14)). The role of Rule 3 is to overwrite the previous ones if the EM-evaluated constraint violation γk(r(x(i+1))) at the candidate design x(i+1) is within the acceptance threshold. Rule 3 has been introduced to prevent erratic operation for the designs residing in the vicinity of the feasible region boundary, in particular, near-zero constraint infringements (either positive or negative) in any given iteration. The graphical illustration of acceptable and insufficient evaluation of the constraint γk by the linearized model γL.k has been provided in Fig. 1.
Prediction of design constraints by means of linear approximation model γL.k of (Eq. 10). The top picture illustrates relocation of the design from x(i) to x(i+1) obtained by solving (Eq. 8). In this example, x(i) is assumed feasible, whereas x(i+1) is allocated at the boundary of the feasible region according to the approximation model γL.k. The bottom-left picture illustrates a case of satisfactory constraint prediction by γL.k, i.e., the design x(i+1) is feasible according to the EM simulation data. The bottom-right picture shows a case of poor prediction: the design x(i+1) is infeasible according to the true constraint value evaluated through EM analysis. The latter will result in a reduction of the search region size δ(i) in the next iteration (cf. Eqs. (13, 14)).
In the remaining part of this section we discuss the acceptance thresholds Γk(i). At the early stages of the optimization process (far from convergence), it is advantageous to relax the acceptance thresholds for constraint violation in order to facilitate identification of small-size designs. However, when close to convergence, the thresholds should be tightened to ensure more precise control over constraints. In practice, this is realized by adjusting the threshold values based on the convergence status of the optimization process. Let Γk.max be a user-defined maximum violation level. Further, let ε be a small positive number determining the algorithm termination. In this work, the termination condition is formulated as ||x(i+1) − x(i)||< ε or δ(i) < ε. For a given iteration i, let us define the convergence indicator
Note that ψ(i) is large when the optimization process is launched, and it is reduced to unity upon convergence. We also have the threshold
As Γk(i+1) is proportional to ψ(i), it is initially equal to Γk.max, and gradually diminished to αΓk.max upon convergence. Here, α is assumes small values greater than zero, e.g., 0.1 or 0.01. This value is not of key importance for the operation of the procedure.
Figure 2 shows the operating flowchart of the proposed size reduction procedure with explicit handling of design constraints. Apart from the termination threshold, the algorithm only contains the following control parameters: the threshold Γk.max (maximum tolerance for constraint violation), and the scaling coefficient α. These parameters are not critical for the algorithm performance. As a matter of fact, we will keep these values fixed for all verification case studies considered in “Demonstration examples”. The acceptance of the candidate design x(i+1) produced by solving (Eq. 8) is based on the standard TR rules, i.e., it is accepted if the decision-making factor θ is positive, and rejected otherwise. In the latter case, the iteration is repeated with a reduced search region. Note that θ > 0 if either the violation of the constraint has been reduced to a sufficient extent, or the design was relocated to the feasible region.
Flow diagram of the proposed size reduction algorithm with explicit constraint handling.
This section summarizes the results of numerical experiments conducted to validate and benchmark the proposed size reduction approach. Verification is based on three compact microstrip couplers, including a branch-line and two rat-race circuits. Our procedure is compared to optimization involving penalty function approach in several variations featuring different setups of penalty coefficients. The performance figures of interest include the obtained circuit size, as well as the accuracy of controlling the constraints, related to the circuit bandwidth and the power split ratio.
The considered circuits have been shown in Fig. 3. Their computational models are implemented in CST Microwave Studio and evaluated using the time-domain solver. In all cases, the main objective is reduction of the circuit footprint area. There are two constraints imposed on the circuit S-parameters: γ1(x) =||S31(x,f0) − S21(x,f0)|| − 0.1 dB, and γ2(x) = max{f ∈ F: max{|S11(x,f)|, |S41(x,f)|}} + 20 dB, where f0 is the center frequency, and F is the intended circuit bandwidth. Two scenarios are considered with different choice of bandwidth for each circuit.
Passive microstrip components utilized for verification of the proposed optimization procedure: (a) compact branch-line coupler (Circuit I)52, (b) rat-race coupler with folder transmission lines (Circuit II)53, (c) rat-race coupler with defected microstrip structure (Circuit III)54.
The first constraint enforces equal power split ratio within 0.1 dB tolerance, whereas the second ensures that the circuit impedance matching and port isolation are better or equal − 20 dB within the operating band. Table 1 provides essential data about all three structures.
The proposed optimization procedure has been applied to the circuits of Fig. 3. In each case, the initial design (the last row of Table 1) was obtained by optimizing the respective circuits to improve the matching and isolation within the operating bandwidth F, subject to equal power split constraint. This means, in particular, that the starting points are feasible from the point of view of both constraints γ1 and γ2 (cf. “Verification circuits”). The termination threshold is set to ε = 10−3, the acceptance threshold are chosen to be Γ1.max = 1 dB, Γ2.max = 0.3 dB, and α = 0.1.
The results are compared to the algorithm employing the penalty function approach. Therein, the objective function is defined as
where the penalty functions c1 and c2 measure relative constraint violations, i.e., we have
The benchmark algorithm is run for all combinations of the penalty coefficients β1 ∈ {10, 100, 1000, 10,000}, β2 ∈ {10, 100, 1000, 10,000}. This is to illustrate the fact that optimum performance of the algorithm requires identification of the appropriate setup of the penalty terms, and sub-optimal setup leads to inferior constraint control or miniaturization rates.
The numerical results have been gathered in Tables 2, 3 and 4. These include the achieved footprint area of the respective circuits, as well as constraint violations at the final design. Figures 4, 5 and 6 show the circuit characteristics at the initial and the optimized designs for all circuits, along with the history of the circuit footprint area and violation of constraints during the optimization run.
Initial (gray) and optimized (black) S-parameters of Circuit I. The vertical and horizontal lines mark the target operating bandwidth and the acceptance level for the matching |S11| and isolation |S41| responses. Also shown is the evolution of the circuit size and constraint violations (in case of feasibility, violations shown as zero): (a) design scenario I (bandwidth 1.45–1.55 GHz), (b) design scenario II (bandwidth 1.47–1.53 GHz).
Initial (gray) and optimized (black) S-parameters of Circuit II. The vertical and horizontal lines mark the target operating bandwidth and the acceptance level for the matching |S11| and isolation |S41| responses. Also shown is the evolution of the circuit size and constraint violations (in case of feasibility, violations shown as zero): (a) design scenario I (bandwidth 0.9–1.1 GHz), (b) design scenario II (bandwidth 0.95–1.05 GHz).
Initial (gray) and optimized (black) S-parameters of Circuit III. The vertical and horizontal lines mark the target operating bandwidth and the acceptance level for the matching |S11| and isolation |S41| responses. Also shown is the evolution of the circuit size and constraint violations (in case of feasibility, violations shown as zero): (a) design scenario I (bandwidth 1.15–1.25 GHz), (b) design scenario II (bandwidth 1.18–1.22 GHz).
The results presented in “Experimental setup and results” allow us to formulate a number of remarks concerning performance of the proposed optimization procedure with explicit handling of design constraints. Furthermore, our methodology can be conclusively compared with the benchmark methods employing the penalty function approach. The observations are as follows.
The proposed algorithm performs consistently for all considered verification circuits. In particular, it enables a satisfactory control of both design constraints. There is no violation for power split ratio constraint observed, whereas the maximum violation for the matching/isolation constraint is only 0.5 dB for Circuit II (design scenario II); however, it should be noted that the acceptance threshold is − 20 dB.
The performance of benchmark methods is highly dependent on the penalty coefficient setup. Among sixteen combination of parameters, only a few lead to satisfactory results in terms of both ensuring good miniaturization ratio and sufficiently precise constraint handling. For Circuit I we have about three of such ‘good’ setups, for Circuit II there is only one (per design scenario), whereas for Circuit III about three.
For the particular setups ensuring good performance of the benchmark procedure, the obtained circuit sizes are comparable to those obtained by the proposed algorithm (which, on the other hand, does not require any setup or tailoring to the task at hand).
In the case of Circuit II, for most combinations of penalty coefficients featuring β1 ≥ 102, the optimization process becomes stuck at the early stages of the optimization process, leaving large feasibility margin for the second constraint. This is due to the fact that a large value of the first penalty coefficient along with a small margin for the power split ratio constraint (only 0.1 dB), makes the problem numerically challenging. More specifically, the objective function becomes highly nonlinear near the feasible region boundary, which hinders exploration of that region and leads to a premature convergence of the process. A similar effect can be observed for Circuit III, although it is less pronounced.
The proposed algorithm turns out to be less prone to the aforementioned issues due to the adaptive adjustment of the acceptance thresholds governed by the convergence status of the algorithm (cf. Eqs. (15, 16)).
The average costs of rendering the optimal designs by the proposed approach equal: 110, 80 and 55 full-wave simulations, for Circuit I, II and III, respectively. Whereas in the case of the benchmark procedure the corresponding costs are: 115, 57 and 45 EM simulations. Therefore, the proposed procedure is around 20% more expensive in terms of the number of EM analyses necessary for the algorithm to converge. Yet, given that in our approach there is virtually no need for tailoring the algorithm to render a satisfactory design meeting the design specifications, this additional cost seems to be justifiable. This is because tuning the optimization procedure to ensure its satisfactory operation normally entails additional computational expenses (e.g., for adjusting penalty coefficients in the case of implicit methods). Furthermore, the primary purpose of the presented technique was to improve the precision of controlling design constraints, and miniaturization rate, both of which have been conclusively demonstrated.
Given a large combined number of circuits, design scenarios, as well as penalty coefficient setups involved in this verification study, the observations summarized above should be categorized as conclusive. Overall, the performance of the presented procedure can be considered competitive over the benchmark (implicit) methods, both with respect to the accuracy of constraint handling and achievable miniaturization rates. The important advantages of the proposed algorithm include easy implementation and no need for adjusting any control parameters. The latter normally incurs extra computational expenses and may require a certain level of experience pertinent to optimization methods.
The purpose of this work was to propose a novel procedure for simulation-based miniaturization of microwave passives. Our approach involves direct control of constraints imposed on electrical performance figures of the circuit under design. Linear approximation models of the constraint functions are employed to make predictions concerning solution feasibility. Appropriately quantified quality of these predictions is utilized in the decision-making process that controls the search region size within the trust region framework. Furthermore, the constraint violation tolerance thresholds are governed by the convergence indicators of the optimization process in order to foster more aggressive size reduction at the early stages of the optimization process. Comprehensive numerical verification involving three microstrip couplers and six design scenarios demonstrate superior performance of the proposed technique as compared to the benchmark methods employing a penalty function approach for implicit constraint handling. Its major advantages include competitive size reduction ratios, accuracy in controlling constraint violation levels, consistency of results obtained for a variety of problems, straightforward implementation, as well as no need for tailoring the procedure to handle a particular microwave structure. The last feature is particularly important in practical applications: tuning the optimization procedure to ensure satisfactory operation (e.g., setting up penalty coefficients for implicit methods) normally entails additional computational expenses and may require optimization-related knowhow lacking by many microwave engineers.
The datasets generated during and/or analysed during the current study are available from the corresponding author on reasonable request. Contact person: [email protected].
Khan, M. S. et al. Eight-element compact UWB-MIMO/diversity antenna with WLAN band rejection for 3G/4G/5G communications. IEEE Open J. Ant. Propag. 1, 196–206 (2020).
Google Scholar 
Jiang, Z. H., Gregory, M. D. & Werner, D. H. Design and experimental investigation of a compact circularly polarized integrated filtering antenna for wearable biotelemetric devices. IEEE Trans. Biomed. Circ. Syst. 10(2), 328–338 (2016).
Article  Google Scholar 
Kracek, J., Švanda, M., Mazanek, M. & Machac, J. Implantable semi-active UHF RFID tag with inductive wireless power transfer. IEEE Ant. Wireless Propag. Lett. 15, 1657–1660 (2016).
ADS  Article  Google Scholar 
Zhang, J., Yan, S., Hu, X. & Vandenbosch, G. A. E. Dual-band dual-polarized wearable button array with miniaturized radiator. IEEE Trans. Biomed. Circ. Syst. 13(6), 1583–1592 (2019).
Article  Google Scholar 
Zhang, H. et al. A low-profile compact dual-band L-shape monopole antenna for microwave thorax monitoring. IEEE Ant. Wireless Propag. Lett. 19(3), 448–452 (2020).
ADS  Article  Google Scholar 
He, Z. & Liu, C. “A compact high-efficiency broadband rectifier with a wide dynamic range of input power for energy harvesting. IEEE Microwave Wireless Comp. Lett. 30(4), 433–436 (2020).
Article  Google Scholar 
Martinez, L., Belenguer, A., Boria, V. E. & Borja, A. L. Compact folded bandpass filter in empty substrate integrated coaxial line at S-Band. IEEE Microwave Wireless Comp. Lett. 29(5), 315–317 (2019).
Article  Google Scholar 
Hou, Z. J. et al. A compact and low-loss bandpass filter using self-coupled folded-line resonator with capacitive feeding technique. IEEE Electron Dev. Lett. 39(10), 1584–1587 (2018).
CAS  Google Scholar 
Chen, S. et al. A frequency synthesizer based microwave permittivity sensor using CMRC structure. IEEE Access 6, 8556–8563 (2018).
Article  Google Scholar 
Qin, W. & Xue, Q. Elliptic response bandpass filter based on complementary CMRC. Electr. Lett. 49(15), 945–947 (2013).
ADS  Article  Google Scholar 
Sen, S. & Moyra, T. Compact microstrip low-pass filtering power divider with wide harmonic suppression. IET Microwaves Ant. Propag. 13(12), 2026–2031 (2019).
Article  Google Scholar 
Zhang, W., Shen, Z., Xu, K. & Shi, J. A compact wideband phase shifter using slotted substrate integrated waveguide. IEEE Microwave Wireless Comp. Lett. 29(12), 767–770 (2019).
Article  Google Scholar 
Wei, F., Jay Guo, Y., Qin, P. & WeiShi, X. Compact balanced dual- and tri-band bandpass filters based on stub loaded resonators. IEEE Microwave Wireless Comp. Lett. 25(2), 76–78 (2015).
Article  Google Scholar 
Yang, D., Zhai, H., Guo, C. & Li, H. A compact single-layer wideband microstrip antenna with filtering performance. IEEE Antennas Wireless Propag. Lett. 19(5), 801–805 (2020).
ADS  Article  Google Scholar 
Liu, S. & Xu, F. Compact multilayer half mode substrate integrated waveguide 3-dB coupler. IEEE Microwave Wireless Comp. Lett. 28(7), 564–566 (2018).
MathSciNet  Article  Google Scholar 
Rayas-Sanchez, J. E., Koziel, S. & Bandler, J. W. Advanced RF and microwave design optimization: A journey and a vision of future trends. IEEE J. Microwaves 1(1), 481–493 (2021).
Article  Google Scholar 
Zhang, F., Li, J., Lu, J. & Xu, C. Optimization of circular waveguide microwave sensor for gas-solid two-phase flow parameters measurement. IEEE Sensors J. 21(6), 7604–7612 (2021).
ADS  Article  Google Scholar 
Feng, F. et al. Parallel gradient-based EM optimization for microwave components using adjoint- sensitivity-based neuro-transfer function surrogate. IEEE Trans. Microwave Theory Techn. 68(9), 3606–3620 (2020).
ADS  Article  Google Scholar 
Na, W. et al. Efficient EM optimization exploiting parallel local sampling strategy and Bayesian optimization for microwave applications. IEEE Microwave Wireless Comp. Lett. 31(10), 1103–1106 (2021).
Article  Google Scholar 
Koziel, S., Pietrenko-Dabrowska, A. & Al-Hasan, M. Improved-efficacy optimization of compact microwave passives by means of frequency-related regularization. IEEE Access 8, 195317–195326 (2020).
Article  Google Scholar 
Güneş, F., Uluslu, A. & Mahouti, P. Pareto optimal characterization of a microwave transistor. IEEE Access 8, 47900–47913 (2020).
Article  Google Scholar 
Ochoa, J. S. & Cangellaris, A. C. Random-space dimensionality reduction for expedient yield estimation of passive microwave structures. IEEE Trans. Microwave Theory Techn. 61(12), 4313–4321 (2013).
ADS  Article  Google Scholar 
Zhang, Z., Cheng, Q. S., Chen, H. & Jiang, F. An efficient hybrid sampling method for neural network-based microwave component modeling and optimization. IEEE Microwave Wireless Comp. Lett. 30(7), 625–628 (2020).
Article  Google Scholar 
Van Nechel, E., Ferranti, F., Rolain, Y. & Lataire, J. Model-driven design of microwave filters based on scalable circuit models. IEEE Trans. Microwave Theory Technol. 66(10), 4390–4396 (2018).
ADS  Article  Google Scholar 
Li, Y., Xiao, S., Rotaru, M. & Sykulski, J. K. A dual kriging approach with improved points selection algorithm for memory efficient surrogate optimization in electromagnetics. IEEE Trans. Magn. 52(3), 1–4 (2016).
Google Scholar 
Spina, D., Ferranti, F., Antonini, G., Dhaene, T. & Knockaert, L. Efficient variability analysis of electromagnetic systems via polynomial chaos and model order reduction. IEEE Trans. Comp. Packaging Manufact. Technol. 4(6), 1038–1051 (2014).
Article  Google Scholar 
Zhao, P. & Wu, K. Homotopy optimization of microwave and millimeter-wave filters based on neural network model. IEEE Trans. Microwave Theory Techn. 68(4), 1390–1400 (2020).
ADS  Article  Google Scholar 
Sabbagh, M. A. E., Bakr, M. H. & Bandler, J. W. Adjoint higher order sensitivities for fast full-wave optimization of microwave filters. IEEE Trans. Microwave Theory Techn. 54(8), 3339–3351 (2006).
ADS  Article  Google Scholar 
Pietrenko-Dabrowska, A. & Koziel, S. Computationally-efficient design optimization of antennas by accelerated gradient search with sensitivity and design change monitoring. IET Microwaves Ant. Prop. 14(2), 165–170 (2020).
Article  Google Scholar 
F. Arndt. WASP-NET®: Recent advances in fast full 3D EM CAD of waveguide feeds and aperture antennas. in IEEE Int. Symp. Ant. Propag., APS-URSI, Spokane, WA, pp. 2724-2727, 2011.
Koziel, S. & Bekasiewicz, A. Multi-Objective Design of Antennas Using Surrogate Models (World Scientific, 2016).
MATH  Google Scholar 
Easum, J. A., Nagar, J., Werner, P. L. & Werner, D. H. Efficient multi-objective antenna optimization with tolerance analysis through the use of surrogate models. IEEE Trans. Ant. Prop. 66(12), 6706–6715 (2018).
ADS  Article  Google Scholar 
Liu, B., Yang, H. & Lancaster, M. J. Global optimization of microwave filters based on a surrogate model-assisted evolutionary algorithm. IEEE Trans. Microwave Theory Techn. 65(6), 1976–1985 (2017).
ADS  Article  Google Scholar 
Cervantes-González, J. C. et al. Space mapping optimization of handset antennas considering EM effects of mobile phone components and human body. Int. J. RF Microwave CAE 26(2), 121–128 (2016).
Article  Google Scholar 
Toktas, A., Ustun, D. & Tekbas, M. Multi-objective design of multi-layer radar absorber using surrogate-based optimization. IEEE Trans. Microwave Theory Techn. 67(8), 3318–3329 (2019).
ADS  Article  Google Scholar 
Torun, H. M. & Swaminathan, M. High-dimensional global optimization method for high-frequency electronic design. IEEE Trans. Microwave Theory Technol. 67(6), 2128–2142 (2019).
ADS  Article  Google Scholar 
Leifsson, L., Du, X. & Koziel, S. Efficient yield estimation of multi-band patch antennas by polynomial chaos-based kriging. Int. J. Numer. Modeling 33(6), e2722 (2020).
Article  Google Scholar 
Jacobs, J. P. Characterization by Gaussian processes of finite substrate size effects on gain patterns of microstrip antennas. IET Microwaves Ant. Prop. 10(11), 1189–1195 (2016).
Article  Google Scholar 
Zhang, W., Feng, F., Jin, J. & Zhang, Q. J. Parallel multiphysics optimization for microwave devices exploiting neural network surrogate. IEEE Microwave Wireless Comp. Lett. 31(4), 341–344 (2021).
CAS  Article  Google Scholar 
Feng, F. et al. Multifeature-assisted neuro-transfer function surrogate-based EM optimization exploiting trust-region algorithms for microwave filter design. IEEE Trans. Microwave Theory Techn. 68(2), 531–542 (2020).
ADS  Article  Google Scholar 
Kim, D., Kim, M. & Kim, W. Wafer edge yield prediction using a combined long short-term memory and feed- forward neural network model for semiconductor manufacturing. IEEE Access 8, 215125–215132 (2020).
Article  Google Scholar 
Cai, J., King, J., Yu, C., Liu, J. & Sun, L. Support vector regression-based behavioral modeling technique for RF power transistors. IEEE Microwave Wireless Comp. Lett. 28(5), 428–430 (2018).
Article  Google Scholar 
Petrocchi, A. et al. Measurement uncertainty propagation in transistor model parameters via polynomial chaos expansion. IEEE Microwave Wireless Comp. Lett. 27(6), 572–574 (2017).
Article  Google Scholar 
Li, S., Fan, X., Laforge, P. D. & Cheng, Q. S. Surrogate model-based space mapping in postfabrication bandpass filters’ tuning. IEEE Trans. Microwave Theory Tech. 68(6), 2172–2182 (2020).
ADS  Article  Google Scholar 
Koziel, S. & Unnsteinsson, S. D. Expedited design closure of antennas by means of trust-region-based adaptive response scaling. IEEE Antennas Wireless Prop. Lett. 17(6), 1099–1103 (2018).
ADS  Article  Google Scholar 
Y. Su, J. Li, Z. Fan, and R. Chen. Shaping optimization of double reflector antenna based on manifold mapping. in Int. Applied Comp. Electromagnetics Soc. Symp. (ACES), Suzhou, China, 1–2 (2017).
Koziel, S. & Pietrenko-Dabrowska, A. On computationally-efficient reference design acquisition for reduced-cost constrained modeling and re-design of compact microwave passives. IEEE Access 8, 203317–203330 (2020).
Article  Google Scholar 
A. Pietrenko-Dabrowska and S. Koziel. Numerically efficient algorithm for compact microwave device optimization with flexible sensitivity updating scheme. Int. J. RF & Microwave CAE. 29(7) (2019).
Koziel, S., Mosler, F., Reitzinger, S. & Thoma, P. Robust microwave design optimization using adjoint sensitivity and trust regions. Int. J. RF Microwave CAE 22(1), 10–19 (2012).
Article  Google Scholar 
A.R. Conn, N.I.M. Gould, & P.L. Toint, Trust Region Methods, MPS-SIAM Series on Optimization (2000).
Koziel, S. Objective relaxation algorithm for reliable simulation-driven size reduction of antenna structure. IEEE Ant. Wireless Prop. Lett. 16(1), 1949–1952 (2017).
ADS  Article  Google Scholar 
Tseng, C. & Chang, C. A rigorous design methodology for compact planar branch-line and rat-race couplers with asymmetrical T-structures. IEEE Trans. Microwave Theory Technol. 60(7), 2085–2092 (2012).
ADS  Article  Google Scholar 
Koziel, S. & Pietrenko-Dabrowska, A. Reduced-cost surrogate modeling of compact microwave components by two-level kriging interpolation. Eng. Opt. 52(6), 960–972 (2019).
Article  Google Scholar 
K. V. Phani Kumar & S. S. Karthikeyan. A novel design of rat-race coupler using defected microstrip structure and folding technique. in IEEE Applied Electromagnetics Conf. (AEMC), Bhubaneswar, India, 1–2 (2013).
Download references
The authors would like to thank Dassault Systemes, France, for making CST Microwave Studio available. This work is partially supported by the Icelandic Centre for Research (RANNIS) Grant 206606 and by National Science Centre of Poland Grant 2018/31/B/ST7/02369.
Engineering Optimization & Modeling Center, Reykjavik University, 102, Reykjavik, Iceland
Slawomir Koziel
Faculty of Electronics, Telecommunications and Informatics, Gdansk University of Technology, 80-233, Gdansk, Poland
Slawomir Koziel & Anna Pietrenko-Dabrowska
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
Conceptualization, S.K. and A.P.; methodology, S.K. and A.P.; software, S.K. and A.P.; validation, S.K. and A.P.; formal analysis, S.K.; investigation, S.K. and A.P.; resources, S.K.; data curation, S.K. and A.P.; writing—original draft preparation, S.K. and A.P.; writing—review and editing, S.K.; visualization, S.K. and A.P.; supervision, S.K.; project administration, S.K.; funding acquisition, S.K All authors reviewed the manuscript.
Correspondence to Anna Pietrenko-Dabrowska.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Koziel, S., Pietrenko-Dabrowska, A. Direct constraint control for EM-based miniaturization of microwave passives. Sci Rep 12, 13320 (2022). https://doi.org/10.1038/s41598-022-17661-7
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-17661-7
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Advanced search
Scientific Reports (Sci Rep) ISSN 2045-2322 (online)
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

source

Meet Alex Lacamoire, the orchestrator behind 'Hamilton,' 'Dear Evan Hansen' – The Washington Post

Seven years have passed, but it takes Alex Lacamoire only a moment to summon his itinerary from July 19, 2015, when the music supervisor for “Hamilton” and “Dear Evan Hansen” scrambled to make his contributions to both soon-to-be Broadway smashes work in harmony.
After conducting a pair of “Hamilton” preview performances at the Richard Rodgers Theatre the day before, as the show’s Broadway opening approached, Lacamoire rose early Sunday morning and boarded a 9:05 a.m. train to D.C. with his wife. He arrived at Union Station, bolted to Arena Stage — where “Dear Evan Hansen” was in the early stages of a pre-Broadway tryout — and watched the 2 p.m. matinee. A technical issue interrupted Act 1’s heartstring-tugging “For Forever,” he recalls, but hearing the song onstage for the first time brought him to tears all the same. Lacamoire then oversaw an orchestra rehearsal at 6 p.m., squeezed in a 7:30 meal at Jaleo, boarded a train back to New York and got home well after midnight.
“How you do one thing is how you do everything,” Lacamoire says during a recent call from his New York apartment. “The level of detail that I have to put into my work as an orchestrator and the amount of scheduling that has to happen in my life as a music supervisor, and the fact that my schedule was that packed and then I still had access to [my itinerary]? That’s how nerdy I am.”
That meticulousness and work ethic helped Lacamoire win back-to-back Tony Awards for his “Hamilton” and “Dear Evan Hansen” orchestrations, and consecutive Grammys for his work on those shows’ cast albums. In 2018, he shared the Kennedy Center Honors with his “Hamilton” co-creators: writer-composer Lin-Manuel Miranda, choreographer Andy Blankenbuehler and director Thomas Kail.
One key scene helped cement ‘Hamilton’ as a Broadway legend. The team that crafted it explains how.
Over the next two months, Lacamoire’s rich arrangements will reverberate through the Kennedy Center once more, with “Hamilton” returning to the Opera House through Oct. 9 and “Dear Evan Hansen” occupying the Eisenhower Theater from Aug. 30 to Sept. 25.
“Working with him, you know you’re going to have somebody who’s going to approach the work in the most comprehensive way, and he’s also going to do so in the most human way,” says Kail, who also collaborated with Lacamoire on the stage musical “In the Heights” and the FX limited series “Fosse/Verdon.” “I think that’s what makes him such a gifted musician, such an incredible bandleader, and that’s what makes him such a wonderful collaborator and partner for every actor and performer that’s onstage.”
Lacamoire, 47, was born in Los Angeles to Cuban immigrant parents before moving to Miami in his youth. He chuckles while telling the story of how, when he was 5 or 6, the teenager tasked with teaching him piano called her own instructor in tears because of how swiftly he absorbed everything she knew. Although Lacamoire was diagnosed with mild hearing loss at a young age, that obstacle never gave him pause as he attended middle and high schools that specialized in fine arts and graduated from Boston’s prestigious Berklee College of Music.
In 2008, Lacamoire won his first Tony for co-orchestrating Miranda’s “In the Heights” score. A year later, when Miranda introduced “Hamilton” to the world with a performance at the White House Poetry Jam, Lacamoire was the pianist by his side. Such early involvement isn’t unusual for Lacamoire: The orchestrations are among the last elements finalized on a musical, but he’s instrumental to the development of any show he’s involved in, listening to composers’ demo tracks and providing feedback during what he calls that initial, “really sacred sphere of vulnerable music-making.”
“We feel that we owe so much of the sound of ‘Dear Evan Hansen’ to Alex,” said Benj Pasek and Justin Paul, the show’s composers, in a joint email. “The way he was able to blend the sound of contemporary music and pop music alongside stunning and lush string arrangements became the signature sound of the show. No one captures that sound like Alex does.”
According to Kail, it’s as if Lacamoire “brings six tools to the production that he’s on when most of us are struggling to find one or two things to contribute.”
Welcome home, ‘Dear Evan Hansen.’ You’re back where you belong.
Referring to himself an “ambassador” of sorts, tasked with interpreting and transmitting the composer’s intent, Lacamoire says his orchestrations are defined by a rhythm section that he hopes is “detailed and organic at the same time.” He also considers not just the sonic aesthetic but the storytelling resonance of every choice he makes.
While “Hamilton” is a hip-hop musical peppered with R&B rhythms, soul music and traditional show tunes, the “Dear Evan Hansen” score is packed with power ballads and alt-rock earworms. Yet, in Lacamoire’s mind, “it’s all music to me.” As Pasek and Paul put it, “His love for consuming new music and all kinds of it is inspiring.”
“I love the variety, and I’ve always been that way,” Lacamoire says. “I’ve always considered myself an eclectic person. Even growing up, it was like, ‘Okay, I’m going to listen to this Keith Jarrett record, and immediately after that I want to listen to this Rush album.’ ”
Lacamoire, who won his fourth Grammy for working with Pasek and Paul on the 2017 movie musical “The Greatest Showman” and an Emmy for 2019’s “Fosse/Verdon,” is respected among his peers. But he is not a household name, and that suits him just fine.
When he was younger, Lacamoire recalls picking up on Marc Shaiman’s background involvement in myriad projects — producing Harry Connick Jr.’s “We Are in Love,” arranging the score for “When Harry Met Sally …,” playing piano in the Sweeney Sisters sketches on “Saturday Night Live.” So Lacamoire feels particularly attuned to fans who notice his work the same way he registered Shaiman’s.
“I see myself in them,” Lacamoire says, “because that means that they are paying attention to the music on a level that I paid attention to music when I was growing up.”
Taking a break from the stage, Lacamoire played a part in four movie musicals released last year: as a music producer on film adaptations of “In the Heights,” “Dear Evan Hansen” and “Tick, Tick … Boom!” and the composer of the Netflix animated feature “Vivo.”
Before Lacamoire peers ahead to the next stage of his career, with what he teases will be a busy 2023, the concurrent runs of “Hamilton” and “Dear Evan Hansen” at the Kennedy Center offer an opportunity to reflect on those life-changing shows. And it comes in the city where both musicals, Lacamoire acknowledges, were born: “Hamilton” in 2009 at the White House and “Hansen” in 2015 at Arena Stage.
“I look forward to being able to stand there at the Kennedy Center, which is a building that I love very much, to be able to see both of those marquees and those posters,” Lacamoire says. “That doesn’t seem like it comes along often in a lifetime.”
John F. Kennedy Center for the Performing Arts, Opera House. 2700 F St. NW. 202-467-4600. kennedy-center.org.
Dates: Through Oct. 9.
Prices: $59-$399.
John F. Kennedy Center for the Performing Arts, Eisenhower Theater. 2700 F St. NW. 202-467-4600. kennedy-center.org.
Dates: Aug. 30-Sept. 25.
Prices: $79-$199.

source

Seven vie for vacant St. Paul City Council seat – Star Tribune

The St. Paul City Council will interview seven finalists Wednesday before picking someone to temporarily join their ranks.
The city charter gives the council the power to fill the First Ward seat left vacant by Dai Thao, who resigned to take a new job in Florida.
Whoever the council chooses must be eligible to vote in the First Ward, and council members have said they want a candidate who will agree not to run for the seat next year.
After 20 qualified candidates applied for the role, the council selected seven top contenders, according to resumes provided by the city:
The council will interview each finalist for 15 minutes Wednesday morning starting at 9 a.m. at City Hall. Members of the public can attend or listen to an audio recording that will later be posted on the city’s website.
The council is aiming to vote on an appointment Aug. 10.

Katie Galioto is a reporter covering St. Paul City Hall for the Star Tribune. She previously covered the Duluth/Superior region while based in the paper’s bureau Up North.
© 2022 StarTribune. All rights reserved.

source

The 7 Best DJ Mixers – MUO – MakeUseOf

Fancy your hand at DJing, or already a pro? Either way, a DJ mixer will help you to prepare and blend tracks together.
Whether a superstar DJ, bedroom DJ, or complete noob, a decent mixer is a vital piece of equipment.
Although not exclusive to the genre, DJ mixers are used essentially with electronic music. If you love techno, hip-hop, house, or EDM, harmonious mixing is key to the DJ's set.
In simple terms, mixers help DJs prepare tracks and blend them together. They also allow you to use equalizers, filters, loops, or other effects to make that perfect mix.
So, let's look at some of the best mixers on the market right now.
Battle mixers must endure punishment, and, thanks to their tank-like construction, Rane mixers are a great choice. The Rane 72-MKII is the company's flagship mixer that will take your scratching to the next level.
Although there are a plethora of professional features on this mixer, you shouldn't feel overwhelmed. As long as you have some knowledge of battle mixers, you will enhance your skills step by step and eventually push them to the limit on the prime piece of equipment.
One excellent feature is the 4.3-inch touchscreen that diverts your attention away from the laptop and onto your adoring dance floor. You can keep an uninterrupted rhythm going with the convenient track navigation feature and access to the core menu settings. You can also monitor the moving waveforms and control the FX.
However, the most crucial feature for any battle mixer is the crossfaders. Rane's ultra-light contactless Mag Four technology is present in the line faders and the crossfader. On top of this, there are virtually unlimited fader customization options, one of which is the hardware tension knob that allows you to set your personal resistance level.
Additionally, the colorful performance pads and sturdy aluminum paddles control various features when connected to DJ software. Serato DJ is the most commonly used with Rane equipment, but lovers of Virtual DJ and Traktor can also get in on the action.
Numark is one of the pioneers of DJ mixers. With over fifty years of experience, you can be sure that purchasing their equipment is a sound choice. If you seek a reliable, robust, and simple mixer that isn't going to cost a small fortune, the Numark M6 USB is a safe bet.
DJs using 2-channel mixers can easily step up to this 4-channel one. You can mix with turntables or, if you prefer, connect it to your laptop or PC via a USB connection and mix or sample from your music-playing software. This connection additionally enables you to record mixes onto your computer to analyze later.
This mixer pretty much does what it says on the tin; there is no steep learning curve, and you can basically plug and play. Each channel features a 3-band equalizer and LED metering to monitor audio levels. You can allocate any channel to either side of the crossfader, enabling you to jump harmoniously between four tracks to create masterful mixes.
This mixer is the perfect start for newbies. Its 2-channel interface and crossfader allow you to master the necessary basics without the distractions of advanced settings and features,
The sound quality is good, and each channel has a 2-band equalizer to experiment with high and low sound adjustments during your mixes. It has a dedicated cue function that lets you preview your mixes, so you can make sure beats and basslines aren't clashing.
It also features a crossfader reverse switch and adjustable curves, giving you a platform to venture into scratching if you have any turntablist aspirations.
It is exceptionally lightweight and transportable, weighing in at just over a pound. So, taking it to your friend's house for a bedroom mix session is straightforward.
On top of that, it is highly affordable. For those considering the pleasures of DJing for the first time, it definitely won't have broken the bank should you decide spinning the wheels of steel isn't for you.
Native Instruments first introduced this mixer quite a while ago. However, it goes without saying that it is still very much a revered piece of equipment. It works hand-in-hand with Traktor Pro DJ software and is perfect for battle mixing and scratching. It's an advanced piece of machinery that can still give the Rane 72 MKII a run for its money despite its more economical price tag.
It markets itself as a "2 + 2 mixer." It has two extra channels on top of its regular two. These two additional channels are called remix decks and allow you to load samples, loops, basslines, or any other audio sample for you to use at will. You can even load whole tracks if you feel the need. A quick press of the sync button will perfectly align your sample with whatever else you are playing.
You can download remix sets from the Native Instruments website to fill up all those empty cells on the remix deck. You will find that it opens up a Pandora's box of opportunities for the advanced DJ and will keep your listeners enthralled.
On top of this, its excellent sound and outstanding build quality make it one of the most loved DJ mixers ever.
If you are an entry-level DJ, a 2-channel mixer is the best choice. However, if you are certain DJing will not be a fad, it is wise to invest in a more quality model.
Allen & Heath is synonymous with quality standards and is a fantastic brand choice for any level of DJ. The XONE:23 is a great entry-level choice thanks to its quality and relatively budget price. However, it's also a fantastic choice for experienced DJs that want to cut out the extras and focus on the fundamentals of mixing tunes.
It is a 2-channel, 3-band equalizer mixer with outstandingly loud and crystal clear sound. You can also add two more inputs for a total of four, which you can control with input level buttons.
Although comparatively small with a 7.5-inch base, the faceplate design adds another two inches. Despite its size, it is sturdy, tough, and heavy. This mixer can take some abuse.
However, battle DJs may want to consider certain features. For one, the line faders are a little apart. Therefore, it's challenging to operate them single-handedly. They also have no curves or reverses. However, you can turn it into a battle mixer by customizing it with the Mini Innofader. This update will make it a better scratching choice.
Another design feature experienced DJs may take a little time to adjust to is the equalizer on the outside. Additionally, the filters work differently because individual channels do not have dedicated controls.
All in all, it is an excellent choice for techno and house DJs, while a bit of customization is required to make it a good choice for battle DJs.
The Behringer DDM4000 has a fantastic array of features for such a reasonably-priced machine. At first glance, the layout may be overwhelming for some novice DJs, and absolute beginners will feel comfortable with something much more basic. However, given time, everything becomes apparent and easy to use. The layout is logical, and all the buttons and knobs have a comfortable feel.
The mixer has four channels, each one supporting two devices. That means a whopping possibility of eight inputs simultaneously connected. And, on top of that, the Behringer DDM4000 boasts many features, including beat-synchronized samplers, four multi-FX sections, two BPM counters, a digital crossfader, and a MIDI.
It is a 4-channel mixer with a fifth channel designated for the microphone input. This channel features a gain, equalizers, talk functions, and FX. Altogether, that is quite a lot of outstanding features for such an affordable mixer.
You can eliminate elements of your tracks with the kill switches. This feature is a great way to ensure seamless mixing and prevent basslines and melodies from clashing. Using this feature in cahoots with the beat-synchronized samplers is a creative way to perform live remixes and thrill your audience or listeners. Battle DJs will be happy with the curve controls on the faders and excellent crossfader features.
This mixer can also store all these different features for up to eight separate users. Excellent for bedroom DJs that share the mixer with friends or even for regular events where DJs share the mixer.
With the DJM-S7 being a sequel to the S11 and S9, it's natural to compare this battle mixer with them. Needless to say, there are pros and cons to purchasing the S7 over its predecessors.
Like its siblings, it is a 2-channel mixer with a 3-band equalizer and eight large performance pads on each. It also features an improved Magvel Fader Pro crossfader for more assured scratching.
The build quality may not be up to the same standard as the S9 or S11, with the overall feel being a little less robust. However, the pads, buttons, and knobs are as sturdy and comfortable as expected from a Pioneer mixer.
However, the S7's main selling point is that, although still in the premium-price range, it is cheaper than the S9 or S11. Additionally, the sound quality is a little better, and it does have some new and exciting features.
Loop MIDI is one new feature absent from previous iterations. With this feature, you can send tempo-synchronized MIDI messages to Serato DJ or rekordbox. Another, though not a selling point for scratch DJs, is Bluetooth connectivity which allows you to stream from mobile devices. On top of this, some of the best features from the S11 remain, noticeably the Combo Pad mode and Scratch Bank.
DJ mixers can cost from as little as $30 for a basic, no-frills machine to more than a couple of thousand dollars. How much you pay will depend on your current DJing level.
If you are an entry-level DJ, you probably only need basic features such as two channels, a crossfader, and a graphic equalizer. The more advanced you become, the more features you will probably enjoy on a mixer.
Samplers, MIDIs, and crossfader customizations for scratching are probably best used when you are ready for it.
A DJ mixer is a piece of hardware to which you can input turntables, CDJs, etc. You don't require any software or computer to use it. They offer better overall quality and give DJs more control over their musical output and system expansion.
A controller is an all-in-one unit that you connect to a laptop and use with DJ software. They are lightweight and, therefore, more portable.
We hope you like the items we recommend and discuss! MUO has affiliate and sponsored partnerships, so we receive a share of the revenue from some of your purchases. This won’t affect the price you pay and helps us offer the best product recommendations.

Join our newsletter for tech tips, reviews, free ebooks, and exclusive deals!

source

Alison Wonderland talks 'Loner' and more, live from HARD Summer [Q&A] – Dancing Astronaut – Dancing Astronaut

Rarely does one encounter an aura like Alison Wonderland‘s; both on and off stage, the Sydney-born musician is a source of galvanizing energy. On July 30, Wonderland lit the fuse of said energy, igniting sentiments of community, love, and fiery rage as she gracefully dominated the main stage at HARD Summer 2022. Wonderland performed songs from her May LP, Loner, incorporated fan-favorite throwbacks, pulled sounds from fellow dance/electronic tastemakers, and even debuted a brand new Whyte Fang ID during her headlining set at the Insomniac festival.
With shows spanning mid-November, Wonderland is now gearing up for a range of North American tour dates. Following appearances at Breakaway Music Festival and Life Is Beautiful in August and September, respectively, Wonderland—alongside Valentino Khan, Jon Casey, and others—will return to Morrison, Colorado’s world-renowned Red Rocks Amphitheater on October 7 to host 2022’s highly anticipated rendition of Temple of Wonderland.
Prior to her main stage set, Alison Wonderland sat down with Dancing Astronaut in San Bernardino, California, for an on-site interview at HARD Summer. The “Something Real” singer touched on her latest album, her highly anticipated headlining show at Red Rocks, and her recent effort to raise money alongside The Brigid Alliance, a non-profit travel fund dedicated to facilitating reproductive care for those affected by the overturning of Roe v. Wade. Sign up to be notified when Alison Wonderland’s “Pro Choice Tee” will be restocked here, purchase tickets to Temple of Wonderland here, and read the exclusive Q&A below.
How long had Loner been in the works prior to its May release?
Alison Wonderland: “I was weirdly planning to take 2020 off to write an album. I’d released ‘Bad Things’ in 2020 and then was writing a bunch throughout the whole pandemic. I was just in my studio taking advantage of that time ‘cause usually I’m touring so much. I like to be in my studio to create; I find it really hard to write on the road, actually. Weirdly, a huge chunk of the album that made it, I wrote last.”
It sounds like the pandemic strangely aligned with your career timeline. Would you agree?
Alison Wonderland: “Yeah, I planned to take off 2020 to write the album. And it’s weird…the whole story of this album was being written as I was going through it. It wasn’t as related to the pandemic as you might think, but I feel like everyone started to relate to being a loner. I’d had the name in my head; I usually dream my album names. For ages, I’d be like ‘I don’t know what this is going to be called,’ and then I’d have a dream and it’d be like ‘Loner, ’ or ‘Awake.’ On ‘Run,’ I had a limited merch thing where I had a crossword of all the song names. I didn’t even know this happened…but someone who bought a long-sleeve pointed out that it included both ‘Run’ and ‘Awake’, like accidentally. Yeah, weird.”
Had you been crowd testing music from the project beforehand?
Alison Wonderland: “Yes, I had been testing it out. ‘Eyes Closed’ was an early writing [that] I tried out during the Proximity mix I did. That’s the beauty of being an electronic artist; you can just do that! The files are on your computer, like who’s going to stop you?”
What’s your favorite track on the album and why?
Alison Wonderland: “Oh, come on…it changes all the time. I associate such strong memories with each track that it depends on what mood I’m in. I also don’t really listen to it. I would say the track I still resonate a lot with, lyrically, would be ‘Forever.’ It’s a really powerful mantra to me. You know when you’re stuck in a part of life, trying to move forward, and the universe just isn’t giving that to you? That’s kind of what I was going through, and my friend said to me, while I was crying in a Starbucks drive-thru, ‘it will feel like forever until it doesn’t.’ And I’m just like, ‘yo, I’m writing a song about you.’ That’s probably the best thing someone’s said to me in years.”
You have Temple of Wonderland coming up at Red Rocks in October. Can you expound on the effort going into the show?
Alison Wonderland: “Every year I spend months working on visuals, musically directing the show, I add strings…I don’t know if you know this, but I was originally a cellist; that’s what I studied, so it’s really cool to be able to put string quartets in there. Last year, we had a choir as well. It’s really cool to give life to my songs, and for so long I was scared to sing live. Then one day, Trippie Redd came up to sing ‘High,’ a song that we did together, at Coachella. And he was just out there belting it out, giving zero fucks. And I’m like ‘yo, if he can do it, maybe I’ll try and do it.’  And that’s kind of what made me snap out of being too scared to sing. All my songs since the beginning of time have been my vocals, so why not?”
Are you bringing any live elements/new visuals to your HARD set?
Alison Wonderland: “Yeah! We’ve got live drums and I’ll be singing. The visuals are obviously really important to me… I’ll see a video clip as I’m writing and be like, ‘fuck, that’d be sick.’ Half of them never get made…I’m surprised the ‘New Day’ video got made ‘cause I was like, ‘I want to be riding a horse and killing people, but with lasers for my eyes and then shooting them into flowers.’ It’s weird seeing an idea in your head materialize into real life, exactly how you saw it. At the show tonight, there’s a visual I saw while on shrooms. I accidentally took too much of a micro-dose, and that’s how I got the ‘Forever’ visuals.”
You boast a prolific, long-spanning career. How would you say your sound has evolved over time?
Alison Wonderland: “When I listen back to my earlier stuff, I can hear how much I’ve learnt, what my voice can do, and what it can’t. I really feel I’ve pushed myself vocally. Musically, I try to incorporate more organic instruments. I really like when you have something non-electronic layered over something electronic; there’s a warmth to it that I don’t hear when layering synth upon synth…My whole idea for this album was ‘order and disorder,’ and I wanted to do this minimalist, rich, organic sound [during] the verses, to then go into something a lot bigger. I just love strings, harp, piano, all that stuff.”
What’s your take on the future of electronic music?
Alison Wonderland: “There’s actually an act [booked for] my Red Rocks show… He’s in my trailer now, and he makes me really excited… in a platonic way! Jon Casey is incredible; he’s so interesting to me as a producer. As soon as I knew I was doing a Red Rocks show, I don’t even know if Jon Casey knows this… I called my agent and said ‘get me Jon Casey.’ What also excites me about the future of electronic music is the fast-growing technology. It’s so much easier now to get to where you need to go sonically as a producer; everything is a lot more accessible. People who may not have had the opportunity to learn music production in the past are doing it now. When I play a set, for the most part, if I’m not using my drops, I’m using drops from people who are more underground, less mainstream, up-and-coming…I think they’re making better music. You’ll hear that in the set tonight as well. I listen to the up-and-coming kids more than I listen to the established people.”
Who’s your dream collaboration?
Alison Wonderland: “Fuck anyone that hates on me for this answer, but Kanye. He’s my favorite artist. I don’t agree with everything he does as a person, but he is by far my favorite artist. He inspires me every time I put on a show, like go big or go home, you know? He gives so much of a fuck that he doesn’t…Every album sounds like Kanye, but he’s bringing elements that no one else would have the fucking balls to [bring.] I could do a TED Talk on how great I think Kanye is, as an artist. I doubt it would ever happen, but I’d literally cry to work with [him]…”
You recently launched a fundraiser with a new pro-choice t-shirt. How has that been received?
Alison Wonderland: “Really good! It’s been amazing; we’ve raised a lot of money. I have really strong opinions on that, which I will happily speak about… It’s funny, I tweeted ‘My body my choice,’ which is very true. And people will say, ‘What about COVID?’ And I’ll be like, ‘Yo, shut the fuck up. That’s everybody’s body, your choice.’ It’s a different thing. You can’t ‘catch’ an abortion, you can’t ‘catch’ pregnancy, it’s not contagious… The other thing people don’t understand is, not only is it about people’s own fucking business, but it’s also about more than terminating an unwanted pregnancy. There are people who’ve miscarried, and the baby is still in there. They need to have an abortion. There are people who have ectopic pregnancies; they need to have something called a D&C [dilation and curettage], which is basically an abortion. So if those rights are taken, it can actually be deadly to women. It’s really disturbing to me, and I get pretty emotional about it. It’s just the most fucking backward thing…I can tweet about it as much as I want, but what is that going to do? It’s going to show I stand with the cause, but if I can raise money and help people who are going through this right now? To me, that means 20 times more. The charity we’re donating to is called The Brigid Alliance, and I love what they’re about. They provide funds, travel, and accommodations to people who really need to go get procedures like that. If I didn’t do anything…I’d look back and be like ‘why the fuck didn’t you?’ Even if it’s not the biggest amount of change, I had to at least try and help. And fuck man…that photo’s tight.”
Featured image: Ivan Meneses
Tags: , , , , ,

Categories:
© 2022 Copyright Dancing Astronaut LLC. Built By: A Digital Kingdom.

source

Kaleb Graham Productions helps people tell their stories – The Daily Jeffersonian

Kaleb Graham graduated from Meadowbrook High School in 2016. The following year he began doing videos of sporting events and formed his business, Kaleb Graham Productions.
“I want to be involved in our community and show people there are many things to do here,” Graham said.
During the COVID pandemic when people could not attend sports events,  Graham invested in equipment and had a crew of 10 livestreaming ballgames over the internet
KGP covered basketball and football games of Meadowbrook, Buckeye Trail, Caldwell, Shenandoah, and more. These games could be seen on Facebook, YouTube, and KGP’s website, www.kgp.tv.
Now in its fifth year, Graham’s business is expanding. His mission: To connect people and help tell their stories.
“Weddings are becoming a large part of what we do, increasing from 10 in 2021 to 40 this year,” he said. Graham contributes much of that to his participation in bridal fairs in the area from Cambridge to Marietta and Columbus.
And music video production is becoming an important part of what they do at KGP, from the local community to Nashville and even L.A.
“Working with Nashville recording and performing artist Ryan Robinette is always a pleasure,” Graham said. Robinette grew up in Guernsey County and now lives in Nashville where he’s pursuing a career in country music. KGP produced a video and shot an album cover for Robinette right here in the hills of Guernsey County.
Adam Calvert, another Guernsey County native, is making his mark in Nashville as well. KGP headed to Nashville last winter to film the studio recording of his hit “Comes in Waves.”
KGP also provides photo services and has worked with several high schools for graduation pictures and videos. Some of the local graduations were livestreamed, as well.
And, Graham explained, “We have a podcast which we do every week where we have business owners come on and tell their stories. We also do a video, Monthly Mash-Up with Morgan & Mitch, for the Cambridge Chamber of Commerce.”
In addition to everything at KGP, Graham and John Westfall operate another business called Monumental Media Marketing. “We help other businesses in the community expand their following by assisting with social media marketing and website design,” he said.
Graham enjoys the hometown feeling of the local community and wants to stay local. “I look at myself as a businessman instead of a videographer. I enjoy meeting everyone and try to make the area grow through the things I do.”
Kaleb Graham Productions is located in the Cambridge Depot at 402 Wheeling Ave., Suite B. For more information, call 740-260-6551.

source

Houston Emergency Center investigating incident where a Houston 911 call taker is heard snoring while taking call for help – WTVD-TV

WATCH LIVE
The Houston Emergency Center are investigating an incident where a 911 call taker seems to have fallen asleep while answering a call for help. In the video above, you'll hear the audio from the call in question.
HOUSTON, Texas — When we call 911, we rely on them to quickly connect us to the help we need. During a 911 call placed last week, the caller says he was placed on hold for about three minutes, then when his call was answered, the call taker seemed to fall asleep about 30 seconds in.
In the recording, you can hear the call taker snoring and the caller says, "Hello?" and then the call taker asks again, "Yes, Houston 911. Do you need medical, police, or fire?"

After the caller was transferred and reported the emergency, he asked to speak to a supervisor about the call taker seeming to fall asleep.
The Houston Emergency Center said they are looking into the call, and when their investigation is over, appropriate personnel action will be taken.
The person who called in said he is concerned this could happen to someone else, someone perhaps in an even more critical situation.
During an interview, Joe Laud, the administration manager for the Houston Emergency Center told ABC13 that employees are having to work overtime to make sure the calls get answered due to staff shortage. A call taker we interviewed last week said he has been working 12-hour shifts, five days a week for the past six months.
"Right now, we have about 140 call takers. But at the same time, we are about 35-40% down," Laud explained on July 21.
Based on those numbers, they are short of 70-plus call takers. ABC13 put in requests to find out exactly how many open positions there are.
Since our story aired the week of July 21, we've heard from people with knowledge of the situation who said they are down, even more, call takers than that.
The Houston Emergency Center sent ABC13 the following statement:
HEC is investigating the allegation of a sleeping call taker while on a 911 call and working to conclude the investigation at which time appropriate personnel action(s) will be taken as indicated by the investigation.In regards to HEC's shortage of call takers in general, this is a nationwide industry issue and HEC is not immune. HEC is making all efforts to ramp up recruitment and selection process to attract and train additional personnel.
For more news updates, follow Courtney Carpenter on Facebook, Twitter and Instagram.
4 former, current Louisville officers charged in Breonna Taylor case
Griner found guilty in Russian drug trial, sentenced to 9 years
Raleigh Fire Chief fires back to social media post

source

Pixel Buds Pro firmware update rolling out to all users – Chrome Unboxed

Advertisement
Chrome Unboxed – The Latest Chrome OS News
A Space for All Things Chrome, Google, and More!
Twitter · Instagram · YouTube
Facebook · Email · About
Privacy Policy
By Leave a Comment

Those who ordered Google’s new Pixel Buds Pro on the day pre-orders opened mostly received their new buds on Thursday, the same day they were available at most retailers. However, whether you ordered in advance or waited to pick up your buds in-store, the firmware version that came with them was outdated and missing some features.

To remedy that situation, an out-of-the-box firmware update was available to users to bring the version from v73 to v120 (or 2.12 as Google officially calls it). Unfortunately, this update was either unavailable for all users right away or was missed by users during the setup process, as these are very easy to miss in the crowded setup menu. In addition, this older version of the firmware is noticeably missing the “Volume EQ” feature, which according to Google, “Automatically adjusts the tuning as you turn the volume up or down,” allowing you to hear fuller sound at lower volumes.

Fortunately, those who missed the out-of-the-box firmware update can manually check for it as Google has announced that the rollout is complete and should be available to all consumers in the “coming days.” I was able to get the update myself today. However, I did run into an issue where the UI kept complaining of not being able to find my buds.

pixel buds pro firmware rollout complete announcement

To apply the update manually, go into your Pixel Buds Pro settings > More settings > Firmware update if you have a Pixel phone. This is available on other Android devices inside the Google Pixel Buds app. If you happen to get the “Cannot reconnect to earbuds” error, wait a few minutes and then reboot your phone. This fixed the issue for me as I found that my buds had updated once my phone was back on.

It is important to note that this update’s volume EQ is not the same as the full 5-band EQ that is still listed as “coming soon,” along with spatial audio with head tracking and volume balance. Other than that, this update should bring the Pixel Buds features up to par with what is currently listed as available on their Help page.

Featured Photo by Mika Baumeister on Unsplash

Those who ordered Google’s new Pixel Buds Pro on the day pre-orders opened mostly received their new buds on Thursday, the same day they were available at most retailers. However, whether you ordered in advance or waited to pick up your buds in-store, the firmware version that came with them was outdated and missing some features.
To remedy that situation, an out-of-the-box firmware update was available to users to bring the version from v73 to v120 (or 2.12 as Google officially calls it). Unfortunately, this update was either unavailable for all users right away or was missed by users during the setup process, as these are very easy to miss in the crowded setup menu. In addition, this older version of the firmware is noticeably missing the “Volume EQ” feature, which according to Google, “Automatically adjusts the tuning as you turn the volume up or down,” allowing you to hear fuller sound at lower volumes.

Fortunately, those who missed the out-of-the-box firmware update can manually check for it as Google has announced that the rollout is complete and should be available to all consumers in the “coming days.” I was able to get the update myself today. However, I did run into an issue where the UI kept complaining of not being able to find my buds.

pixel buds pro firmware rollout complete announcement

To apply the update manually, go into your Pixel Buds Pro settings > More settings > Firmware update if you have a Pixel phone. This is available on other Android devices inside the Google Pixel Buds app. If you happen to get the “Cannot reconnect to earbuds” error, wait a few minutes and then reboot your phone. This fixed the issue for me as I found that my buds had updated once my phone was back on.

It is important to note that this update’s volume EQ is not the same as the full 5-band EQ that is still listed as “coming soon,” along with spatial audio with head tracking and volume balance. Other than that, this update should bring the Pixel Buds features up to par with what is currently listed as available on their Help page.
Featured Photo by Mika Baumeister on Unsplash

Filed Under: Pixel Buds, Updates
advertisement
advertisement
TWITTER · FACEBOOK · INSTAGRAM · YOUTUBE · EMAIL · ABOUT
Copyright © 2022 · Chrome Unboxed · Chrome is a registered trademark of Google Inc.
We are participants in various affiliate advertising programs designed to provide a means for us to earn fees by linking to affiliated sites.
PRIVACY POLICY

source

🌱 Hazardous Trash + Charging Forward + Free Small Business Counseling – Dunedin, FL Patch

Hello neighbors! It’s Kristen, your host of the Dunedin Daily. Here’s a look at everything happening in town today…
First, today’s weather:
An afternoon thunderstorm. High: 88 Low: 77.
Our local sponsor has some great stuff to offer:
Looking to buy or sell a home in the Dunedin area? Tammie Fraser at EXP Realty has lived in our area since 1979 and knows the rapidly changing Dunedin real estate market like few others. She specializes in educating and guiding sellers as well as helping first time buyers find the home of their dreams. For deep local knowledge and expertise, call Tammie at (330) 307-9538 and ask about a free seller’s report, or visit her here to learn more.
Want to see your business featured in this spot? Click here to get started.
Here are the top three stories today in Dunedin:
Dunedin Daily Pic of the Day:


Thank you Marsha Francis for sharing this adorable photo of your Australian Labradoodle doing what she loves most!


Today in Dunedin:

From my notebook:
More from our sponsors — thanks for supporting local news!
Events:
Thanks for following along and staying informed. I’ll catch up with you bright and early tomorrow morning with a new update!


Get more local news delivered straight to your inbox. Sign up for free Patch newsletters and alerts.

source

VIQ Solutions AccessPoint simplifies court recording management and distribution – Help Net Security

Video: How to spot deep-faked candidates during interviews
VIQ Solutions launches AccessPoint, providing court personnel and legal professionals around the world with instant access to court recordings through a cloud-based portal.
As technology plays an increasing role in transforming court workflow, courts recognize the need for innovative solutions to replace time intensive, manual processes. Developed in collaboration with key clients, AccessPoint improves access to evidentiary court recordings, advances data traceability and transparency and increases collaboration for stakeholders within and outside the courtroom.
“Diminishing court resources and challenging work environments continue to drive technology innovation. The digitization and transformation of capture and management solutions are essential. AccessPoint solution is a key component of our vision to provide courts with comprehensive solutions to improve efficiency and accessibility of data,” said Susan Sumner, President and Chief Operating Officer, VIQ Solutions. “The new capabilities in AccessPoint underscore our commitment to continuous innovation helping the world’s courts reimagine how to administer justice.”
AccessPoint delivers search, request and export features to access audio recordings captured during court proceedings. Advanced security settings provide granular control of authorized users and auto-logging of access and events to simplify the chain of custody tracking. AccessPoint is an integral part of VIQ’s end-to-end solution suite for Courts designed to deliver access to recordings.
“AccessPoint facilitates judicial transparency by providing secure access to court recordings,” said Vahram Sukyas, Chief Technology Officer, VIQ. “Authorized users can review proceedings using AccessPoint’s built-in player without downloading a client application. Jurisdictions will save time and money as the days of manually processing orders, copying, and mailing media are over.”
AccessPoint is a complementary product to CapturePro and a part of the complete VIQ Court Solution Suite. CapturePro is designed to optimize and secure the evidentiary content presented during litigious interactions. From audio and video capture to the management of recordings to creating actionable electronic transcripts and providing web-based access to court records. Ultimately, the solutions provide access to court records – when and how stakeholders need them.

source

Studio One pioneer Dudley Sibley dies at home – Jamaica Gleaner

Ska and rocksteady singer Dudley Sibley, one of the foundation artistes associated with the legendary Clement ‘Sir Coxsone’ Dodd, died last Saturday at his home in Kingston. His daughter, Grace Corvino, his only child, reported that Sibley, who was 73, passed away peacefully, but that he had been ailing quietly.
“I didn’t know that he was sick. The last time we spoke, he was his usual self; he never complained. I just found out from the neighbours,” Corvino, who resides overseas, said.
One such neighbour was Nadia McIntosh, who was also his caregiver. It was she who found Sibley sitting on the verandah last Saturday evening, lifeless. McIntosh explained that Sibley, who wore a colostomy pouch, had been feeling unwell from the Sunday before but didn’t want to visit the doctor.
“Although me beg him, Dudley just didn’t want to go to the doctor. The Saturday morning, when I went to the house and made him a cup of tea, I realised that his hand was shaking, so I helped him. I asked him again about going to the doctor, but he told me to go to the market. On my way back, I was calling him and he didn’t answer, and that’s not like Dudley. So I took the taxi straight to his house and saw him sitting on the verandah. I called out him name, and he didn’t answer. So I went up and touched him, and he didn’t respond. That’s when I realised that Dudley was gone,” McIntosh said sadly. She spoke at length about his kindness.
Sibley, who was born on September 12, 1948, in Derry, St Mary, moved to Kingston at age 11 and from then, he had a desire to do music. Black Star Liner singer Fred Locks clearly recalls seeing Sibley at Dodd’s studio and overhearing him tell the producer that he had a good song that he wanted to record.
“But ‘Duddu’ was the gardener, and Mr Dodd tell him, gwaan back go do the garden work. Eventually, Coxsone give him a break and record the song called Gun Man. And it do good, too. But ‘Duddu’ feel like Coxsone was trying to keep him in the background as a handyman and not a real artiste; but him never hold nuh bitterness ‘gainst Coxsone,” Fred Locks said.
Gun Man climbed to the top 10 of the British charts and has the distinction of being the first song in Jamaica to use that title. A ‘rude boy tune’, it was not glorifying the gun, but was banned from the airwaves in Jamaica.
In an interview with THE STAR last year, Sibley shared that in the early ‘60s, he met a 16-year-old singer who would become his friend. Most people know that singer as Bob Marley, but Sibley referred to his friend simply as ‘Robbie’.
“Robbie was three years older than me, but we had a similar home situation that see us both ending up at government yard in Trench Town. Yes, the same place Robbie sing ‘bout. And Robbie get a place to stay at the back of Coxsone, Brentford Road premises, and I ended up there, too,” Sibley recalled. “Robbie was a talented guy and from me see how him put him things together, I know that he had it in him to be big. Me feel good when Robbie song dem start hit, and him feel good for me when my song, Gun Man, come out and hit the British chart.”
Sibley’s daughter, who is a mother of five, shared that her children all love their grandfather’s songs. She listed songs such as Run Boy Run; Time is the Key; Hole in Your Soul, a collab with Peter Austin; See Them a Come; and of course, Gunman.
“My father loved music. It was his soul. When he went to perform in Uruguay about five years ago, we used FaceTime to watch him perform, and it was great. My father was very kind; he would give you the shirt off his back. I am still in shock,” Corvino stated.
Her wish is for Sibley to be recognised for his hard work and dedication to the music industry.
[email protected]
View the discussion thread.

source

NSW Police release audio in renewed effort to solve Turkish diplomat and bodyguard's murder in Sydney in 1980 – ABC News

NSW Police release audio in renewed effort to solve Turkish diplomat and bodyguard's murder in Sydney in 1980
Police hope an audio recording of a woman claiming responsibility for an assassination of a Turkish diplomat four decades ago in Sydney will help them solve the crime. 
Sarik Ariyak, 50, and his bodyguard, Engin Sever, 28, were fatally gunned down outside a home in Dover Heights on December 17, 1980.
Detectives are still searching for clues on the cold case deaths, despite releasing a $1 million reward for information and conducting new searches in recent years.
Police have today released a phone call recording of a woman who called a media organisation shortly after the pair were killed, claiming responsibility for the assassination on behalf of the Justice Commandos of the Armenian Genocide. 
They are hoping the minute-long recording could generate new leads in the unsolved killings. 
The woman states: "Turkish institutions are our target." 
Investigators are also seeking assistance to decipher the words spoken after, "The authors of …" in the case they are of significance to the investigation.
The mass killing occurred in 1915 during World War I, when around one million Armenians were either killed or died from starvation or disease while being deported in mass marches. 
Several governments, including that of New South Wales, have described the events as genocide, a claim that is disputed by Turkey.
Mr Ariyak and Mr Sever were leaving a residence in Portland Street, Dover Heights, in separate vehicles, when they were approached by two unknown men who fired several shots at close range before fleeing on a motorcycle.
Police said Mr Ariyak died at the scene and Mr Sever died a short time later at St Vincent's Hospital.
Following a review of the case, police divers combed the floor of Sydney Harbour in August 2020 for "items of interest". 
No one has ever been charged for the crime. 
The homicide is now being reinvestigated by the NSW Joint Counter Terrorism Team (JCTT), which comprises NSW Police, the Australian Federal Police, the Australian Security Intelligence Organisation and the NSW Crime Commission.
Counter Terrorism and Special Tactics Commander Assistant Commissioner Mark Walton asked people to listen to the recording carefully. 
"While we continue this investigation, we suspect there are people who know exactly what happened that day but have not yet been willing to speak with authorities," Assistant Commissioner Walton said. 
"We'd like to hear from these people as soon as possible, as well as anyone whose memory may be refreshed by the audio we've released, no matter how insignificant the information may seem, it could be invaluable to the investigation."
We acknowledge Aboriginal and Torres Strait Islander peoples as the First Australians and Traditional Custodians of the lands where we live, learn, and work.
This service may include material from Agence France-Presse (AFP), APTN, Reuters, AAP, CNN and the BBC World Service which is copyright and cannot be reproduced.
AEST = Australian Eastern Standard Time which is 10 hours ahead of GMT (Greenwich Mean Time)

source

VerseOne – Publishing & Sync Coordinator (Remote, US) – Music Business Worldwide

The Coordinator will handle day-to-day operational and administrative needs of the Publishing and Sync department.
The successful applicant will be an integral part of the team. They will be responsible for pitching our catalogue to sync opportunities, securing licensing deals, acquiring new artists and composers to our roster as well as assisting the team with other urgent tasks that may arise. Will be a key, trusted member of the team whose work will help ensure the department is performing at the highest level possible.
VerseOne Distribution provides digital music distribution services for artists to sell their music and music videos on digital streaming and download stores worldwide. Music and music videos submitted to us gets distributed to 280+ streaming and downloads endpoints. Artists keep 100% of their copyrights.
Music Business Jobs is the most effective way for the global music industry to find the best candidates for their open positions.
In addition to being seen by over 300,000 monthly unique readers online, our listings are also emailed direct to more than 50,000 professional subscribers every week – across the US, UK, Europe, Asia-Pacific and beyond.
Click through below for details on how to submit a Music Business Jobs listing – and learn why our advertisers ‘strongly recommend’ us to their peers…

source

Southwick officials seeking more engagement from public in Master Plan process – MassLive.com

SOUTHWICK- Town officials are looking for greater involvement from Southwick residents as the town develops what many hope will be the first Master Plan to be approved in Southwick in more than 50 years.
The Master Plan Advisory Committee is urging residents, adults, youth, and business owners alike, to participate in the Master Plan survey that is available online. The survey is meant to provide a baseline of data upon which future community Master Plan hearings are organized. Community Master Plan meetings are expected to begin this fall.
As of the most recent MPAC meeting July 21, a total of 355 responses had been submitted for the survey, but the committee is hoping for more.
Note to readers: if you purchase something through one of our affiliate links we may earn a commission.
Registration on or use of this site constitutes acceptance of our User Agreement, Privacy Policy and Cookie Statement, and Your California Privacy Rights (User Agreement updated 1/1/21. Privacy Policy and Cookie Statement updated 7/1/2022).
Cookie Settings
© 2022 Advance Local Media LLC. All rights reserved (About Us).
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Advance Local.
Community Rules apply to all content you upload or otherwise submit to this site.
Ad Choices

source

Universal Studios' Halloween Horror Nights prepare to scare – USA TODAY

The Fourth of July was just a few days ago, but Universal Studios theme parks are already neck-deep into planning for Halloween. For weeks, they’ve been dropping details about this year’s Halloween Horror Nights, which begin Sept. 2 at Universal Orlando Resort in Florida and Sept. 8 at Universal Studios Hollywood.
The fan-favorite fall event is known for its intricately themed haunted houses and pulse-pounding scare zones, which aren’t designed for little ones.
Guests of all ages, however, can get an early start on chills this month with a new addition at Universal Studios Hollywood that is straight off the big screen. 
5 MISTAKES I MADE AT UNIVERSAL ORLANDO:How to save more time, money than me
HELLO, MARIO:Super Nintendo World is coming to the US next year
Universal Studios Hollywood announced Thursday that an original set from Jordan Peele’s upcoming thriller “Nope” will join the park’s World-Famous Studio Tour on July 22, the same day the movie opens in theaters.
“I remember visiting Universal Studios when I was 12 years old and being mesmerized,” Peele, who also directed “Get Out” and “Us,” said in a press release. “That experience reinforced my passion and drive to someday join in on the meta-magic of ‘backlot life.’ “
The “Nope” set from the film’s fictitious Jupiter’s Claim theme park will be a permanent part of the backlot tour just like sets from “Back to the Future,” “Psycho” and other classic films.
There will be 10 haunted houses at Universal Orlando and eight haunted houses at Universal Studios Hollywood this year.
Themes change from year to year and are announced over time.
Here’s what’s been revealed so far:
Universal Orlando dates:
Universal Studios Hollywood dates:
Tickets for both locations are on sale now.
Single-night tickets start at $73.99 at Universal Orlando. They start at $72 at Universal Studios Hollywood.
Depending on the date, tickets can top $100.
Halloween Horror Nights require special tickets, separate from regular park admission.
Both parks post warnings on their websites advising that Halloween Horror Nights may be too intense for children under age 13.
Select rides are available at both parks during Halloween Horror Nights.
They include Hollywood Rip Ride Rockit, TRANSFORMERS: The Ride – 3D, and Harry Potter and the Escape from Gringotts, among others, at Universal Orlando. 
Jurassic World – The Ride, Harry Potter and the Forbidden Journey, and Revenge of The Mummy – The Ride are among the rides available at Universal Studios Hollywood.

source

Major auto events of July 2022: Launch of three Mercedes-Benz EQ models, Kia Carnival CKD, Nissan Serena, Ford Ranger, and more | Zigwheels – ZigWheels Malaysia

The month of July was jam-packed with big events. From Kia introducing the locally-assembled Carnival in 7- and 8-seat configuration to Perodua & Nissan launching MPVs in the market. The EV market was greeted by three EQ models, all looking stunning and featuring amazing tech. In case you missed out on any of that, here’s a quick monthly wrap.
2022 Kia Carnival CKD launch: Kia Malaysia launched the locally-assembled Carnival in two seating configurations – 7 & 8-seater. The 11-seater model will still be offered in fully-imported form. All the variants are powered by a 2.2-litre inline-four turbodiesel engine making a maximum power of 199 hp at 3,800 rpm and a peak torque of 440 Nm from 1,750 to 2,750 rpm. The Kia Carnival CKD model price ranges from RM 231,229 – RM 261,229.
Also Read: 2022 Kia Carnival: Variants analysis
2022 Kia Carnival CKD
2022 Ford Ranger launch: The all-new Ranger made its Malaysia debut last month. It is offered in seven variant options, including XL, XLT, XLT Plus, and WildTrak. The pickup truck price ranges from RM108,888 to RM 168,888. Ford is offering the pickup in two engine options, depending on the trim selected, they are – 170hp/405Nm 2.0-litre single turbo diesel and 210hp/500Nm 2.0-litre bi-turbo inline-four diesel.
2022 Ford Ranger
2022 Mercedes-Benz EQB 350 launch: In July alone Mercedes-Benz Malaysia introduced three EQ models. One such model is the EQB 350 4MATIC. With an estimated price of RM 330,000, the e-motors here pump out a max power of 292 hp along with a peak torque of 520 Nm. The car comes packed with 19-inch alloys, LED high-performance headlamps, comfort suspension, head-up display, wireless charging, MBUX interior assist, and a driving assistance package.
2022 Mercedes-Benz EQB 350 launch
2022 Mercedes-Benz EQC400 AMG launch: Mercedes-Benz Malaysia lineup now includes the first-ever, fully-electric EQC that is now available locally in the EQC400 AMG Line. Priced at RM390,000, the EV weighs around 2.5-tones and comes with 20-inch AMG multi-spoke light-alloy wheels, AMG Line body kit, multibeam LED headlights with adaptive high beam assist plus, a 10.25-inch display with Apple CarPlay & Android Auto, head-up display, wireless charging, and more. The e-motors here generate 408 hp and 760 Nm.
2022 Mercedes-Benz EQB 350 launch
2022 Mercedes-Benz EQS450+ launch: Mercedes-Benz Malaysia this July introduced the first, fully-electric EQS in the EQS450+ version. Priced at RM 698,888, the EV comes with a single e-motor powered by a 107.9 kWh lithium-ion battery. Together they pump out 33 hp of power, 565 Nm of torque, and a range of 782 km. The EV offers several amazing features like – Amazing High Beam Assist, 21-inch AMG light-alloy wheels, AMG Line bodykit, digital light system, airmatic suspension, MBUX Hyperscreen with 12.3-inch instrument display, 12.3-inch display for front passenger, a 17.7-inch OLED center touchscreen display and much more.
2022 Mercedes-Benz EQS450+ launch:
2022 Perodua Alza launch: Perodua launched the all-new Alza MPV in Malaysia in three variant options – base X, mid-spec H, and range-topping AV. The Alza MPV is priced from RM 62,500 to RM 75,500 and is powered by a 1.5-litre naturally-aspirated 4-cyl petrol engine making a max power of 105 hp and 138 Nm. It comes with several impressive standard features like an analogue instrument cluster with a 4.2-inch multi-info display, rear air-con vents with blower control, keyless entry with push-start button, digital head-unit with Bluetooth, autonomous emergency braking with pre-collision warning, Lane Departure Prevention (LDP), Lane Departure Warning (LDW), Front departure alert, pedal misoperation control, and Automatic high beam.
2022 Mercedes-Benz EQS450+ launch:
Two Limited-edition BMW 3 Series: In July, the Malaysian auto market benefited from not one but two limited edition special 3 Series models – 320i M Sport and 330i M Sport. The two models are priced at RM 262,800 and RM 304,800 respectively which includes a five-year unlimited-mileage warranty programme with free scheduled services. Both the models are powered by a 2.0-litre inline-four turbo engine mated to an 8-speed automatic transmission gearbox. In the 320i variant, this mill makes 184hp/300Nm, while in the 330i option the figures hike up 258hp/400 Nm.
Two Limited-edition BMW 3 Series2022 Honda HR-V launch: The highly-awaited Honda HR-V finally made it to the local market last month. The compact crossover is offered in four trim options with prices starting from RM 114,800 (on-the-road with insurance). The latest Honda is available in three powertrain options – a 121hp/145 Nm 1.5-litre inline-four naturally aspirated, 181hp/240 Nm 1.5-litre turbo, and a 131hp/253Nm 1.5-litre Atkinson-cycle petrol & two-motors. The new HR-V is one of the best equipped cars in the segment with features like an 8-inch display audio head-unit with Apple CarPlay & Android Auto, a 7-inch semi-digital instrument cluster, rear air-con vents, ULTRA rear seats, air diffusion system, dual-zone climate control, and more.
Also Read: 2022 Honda HR-V: 3 Things we like and 3 things we don’t
2022 Honda HR-V
Lamborghini Huracan Tecnica launch: After making its global debut just a few months ago, the Huracan Tecnica finally made its Malaysian debut in July. Placed between the Huracan STO and Huracan EVO RWD, this one strikes a perfect balance of road and track-friendly supercar. Powering the Technica is a 640hp/565 Nm naturally-aspirated 5.2-litre V10 mill paired to a 7-speed dual-clutch gearbox. The Lamborghini supercar completes the century sprint in just 3.0 seconds. The new supercar in the town has a starting price tag of RM 1.05 million (before options & duties).
Lamborghini Huracan Tecnica
Ferrari 296 GTS south-east Asia debut in Malaysia: Sepang International Circuit in Malaysia last month hosted the global premiere of the Ferrari 296 GST. In Malaysia, the latest Ferrait will retail from RM 1,448,000 (before taxes, duties, insurance, and options) and will be powered by the new ‘Picollo V12’ 3.0-litre V6 hybrid powertrain. The unit generates a max power of 830 hp and a peak torque of 740 Nm. The Ferrari goes from 0-100 kmph in 2.9 secs and 0-200 kmph in 7.6 secs. The top speed is rated at over 330 kmph.
Ferrari 296 GTS
2022 Nissan Serena facelift launch: The all-new Nissan Serena facelift model entered the local market earlier in July this year. The MPV is offered in two versions in the local market namely – 2.0L Highway Star and 2.0L Premium Highway Star. The two are priced at RM 149,888 and RM 162,888 respectively. Both the trims are powered by the same naturally-aspirated 2.0-litre inline-four hybrid engine making 150 hp and 200 Nm of torque. The drive is sent to the front wheels via a CVT unit. The MPVs standard kit includes –
3-row seats with 13 seating layouts, zero gravity seats (driver, front & second-row passengers), 6.25-inch touchscreen display with Apple CarPlay & Android Auto, 7.0-inch instrument cluster, dual-zone automatic climate control, and more.
2022 Nissan Serena facelift launch
2022 Volkswagen Golf R-Line price announced: Just before the end of July, Volkswagen Passenger Cars Malaysia revealed the official price of the new Golf R-Line. The new hatch will be offered for RM 170,560 (on-the-road without insurance) and is powered by a 1.4-litre TSI turbo mill making 150 hp and 250 Nm and paired to a dual-clutch gearbox. This setup allows the car to go from 0-100 kmph in 8.5 secs. The latest VW feature list includes – the R-Line exterior package, LED Plus headlights & taillights,17-inch alloys, a 30-colour interior lighting system, an intelligent voice control system, a 10.25-inch digital instrument panel, a 10-inch touchscreen infotainment display, 3-zone climate control, and more.
all-new Golf R-Line introduced
Major international auto events 
2023 Porsche Taycan gets a software update: Porsche has announced a new software update for the 2023 Taycan. The said update will not only enhance the car’s performance but will also improve its charging efficiency and comfort levels. In case you are wondering, the update is completely free of charge.
2023 Porsche Taycan
New Suzuki Grand Vitara unveiled: The all-new Suzuki Vitara SUV was unveiled in India in July. Conceptualized, developed, and designed by Suzuki, it will be manufactured in India.
Developed as a global flagship SUV, it showcases the best of the brand’s work, be it design, tech, or performance.
New Suzuki Grand Vitara
Chery Omoda 5 launched in China: The Malaysian-bound Chery Omoda 5 compact SUV finally hit the Chinese dealerships in July. It is on offer in seven variants – priced between RMB 92,900 (RM 61k) and RMB 128,900 (RM 85k). It is expected to arrive soon in Malaysia to rival the likes of the Honda HR-V and Proton X50.
Chery Omoda 5
Porsche 911 GT2 RS Clubsport sold out: Built in collaboration with Manthey Racing, the 911 GT2 RS Clubsport 25 celebrates the team’s 25th anniversary. Limited to only 30 units, the car is now completely sold out. Powering it is a 3.8-litre twin-turbo flat-six flat-six engine making a maximum power output of 690 bhp. The drive is sent to the rear wheels via a 7-speed PDK box.
Porsche 911 GT2 RS Clubsport
All-new Nissan X-Trail launched in Japan: Nissan introduced the 4th gen X-Trail in Japan. The car features a new design language, redesigned platform, and high levels of cabin quietness. Powering the X-trail is the 2nd gen e-Power hybrid system with a petrol mill (serves as a generator to produce electricity). Its specs kit includes – Nissan Safety Assist 360, adaptive LED headlights, 12.3-inch Advanced Driver Assist display, Bose premium sound system, a 10.8-inch head-up display and more.
All-new Nissan X-Trail
Honda ZR-V revealed: Along with the new CR-V, Honda also introduced the new ZR-V in July. Set to hit the Japanese market next month, the ZR-V has so much in common with the US-spec HR-V, including exterior design, cabin layout, and features.
Honda ZR-V
Also Read: 2022 Maxus T60 launched in Malaysia, here’s all you need to know
We use cookies to improve your experience on our website. By continuing to browse this site, you agree to our Privacy Policy

source

Best Things to Do in Dallas August 3 – August 10 | Dallas Observer – Dallas Observer

Dallas’ independent source of
local news and culture
account
Classical Music
August 3, 2022 4:00AM
Blue Moon, Golden Ticket: After 25 Years, Dave Lane Finally Wins the Race to Radio Host
By Kelly Dearmore
Jon Stewart Calls Out Ted Cruz on His ‘Buulllshiiit’ Over the PACT Act
By Danny Gallagher
We Tried the New StretchLab in Dallas
By Alex Gonzalez
Join the Observer community and help support independent local journalism in Dallas.
Get the latest updates in news, food, music and culture, and receive special offers direct to your inbox.
Become a member and go ad-free!

source

Kinross reports 2022 second-quarter results – Kinross Gold Corporation

Kinross reports 2022 second-quarter results  Kinross Gold Corporation
source

Eloro Resources' Deep Underground Hole DSBU-10 Intersects 188.64 g Ag eq/t (44.75 g Ag/t, 0.08 g Au/t, 1.05% Zn, 0.76% Pb and 0.14% Sn) over 349.08m in Core of Feeder Zone in the Santa Barbara Target Area at the Iska Iska Silver-Tin Polymetallic – Financial Post

Author of the article:
TORONTO, July 21, 2022 (GLOBE NEWSWIRE) — Eloro Resources Ltd. (TSX-V: ELO; OTCQX: ELRRF; FSE: P2QM) (“Eloro”, or the “Company”) is pleased to announce assay results from two (2) additional diamond drill holes from its on-going drilling program at the Iska Iska silver-tin polymetallic project in the Potosi Department, southern Bolivia. Hole DSBU-10 is an underground hole drilled at azimuth 400 at -600 dip across the higher-grade feeder zone. Hole DHK-24 is a surface drill hole collared near Huayra Kasa approximately 100m SE of Hole DSBU-10 and drilled to the SW at -600. Four drills including three surface drills and one underground drill are focussed on completing drilling in the Santa Barbara Resource Definition Drilling Area. A fourth surface drill has been added to further expand drilling capacity.

Overall, the Company has completed 64,573m in 102 drill holes to-date at Iska Iska, including four holes in progress, as shown in Figure 1. Tables 1 and 2 list significant assay results for the two drill holes reported and Figure 2 is a geological cross section.   Prices used for calculating Ag equivalent grades have been updated to current metal prices as noted below. Table 3 summarizes drill holes with assays pending. Highlights are as follows:

Santa Barbara Mineral Resource Definition Target Area – Surface Drilling

Significant results are as follows:

Tom Larsen, CEO of Eloro said: “These are the best drilling results to date at Iska Iska, even with the discounted metal prices being quoted in comparison to higher values used for previous silver equivalent drill hole results. The significance of DSBU-10 and DHK-24 both drilled at -60 degrees further strengthens our geological belief that there is major tonnage potential in this feeder system that further expands the already extensive initial Santa Barbara mineral resource definition target area currently being drilled.”

Dr. Bill Pearson, P.Geo. Eloro’s Executive Vice President, Exploration commented: “We continue to get impressive results from the higher-grade feeder zone at Santa Barbara. Based on geological and geophysical evidence, it appears that this feeder zone may extend much further to the SE across the centre of the Iska Iska Caldera. We are currently completing addition drill holes to test this possibility and have added an additional drill to further accelerate the program.”  

Table 1: Significant Results, Underground Diamond Drilling, Santa Barbara Resource Definition Target Area as at July 21, 2022: https://www.globenewswire.com/NewsRoom/AttachmentNg/b3f6ee24-8f39-4f6e-bb5d-7a852571ac6a

Note: True width of the mineralization is not known at the present time, but based on the current understanding of the relationship between drill orientation/inclination and the mineralization within the breccia pipes and the host rocks such as sandstones and dacites, it is estimated that true width ranges between 70% and 90% of the down hole interval length but this will be confirmed by further drilling and geological modelling.

Chemical symbols: Ag= silver, Au = gold, Zn = zinc, Pb = lead, Cu = copper, Sn = tin, Bi = bismuth, Cd = cadmium and g Ag eq/t = grams silver equivalent per tonne. Quantities are given in percent (%) for Zn, Pb Cu, Sn, Bi and Cd and in grams per tonne (g/t) for Ag, Au and Ag eq.

Metal prices and conversion factors used for calculation of g Ag eq/t (grams Ag per grams x metal ratio) are as follows: (Prices updated as of July 21, 2022, to more accurately reflect current metal prices):

In calculating the intersections reported in this press release a sample cutoff of 30 g Ag eq/t was used with generally a maximum dilution of 3 continuous samples below cutoff included within a mineralized section unless more dilution is justified geologically.

The equivalent grade calculations are based on the stated metal prices and are provided for comparative purposes only, due to the polymetallic nature of the deposit. Metallurgical tests are in progress by Blue Coast Ltd. to establish levels of recovery for each element reported but currently the potential recovery for each element has not yet been established. While there is no assurance that all or any of the reported concentrations of metals will be recoverable, Bolivia has a long history of successfully mining and processing similar polymetallic deposits which is well documented in the landmark volume “Yacimientos Metaliferos de Bolivia” by Dr. Osvaldo R. Arce Burgoa, P.Geo.  

Table 2: Significant Results, Surface Diamond Drilling, Santa Barbara Resource Definition Target Area as at July 21, 2022: https://www.globenewswire.com/NewsRoom/AttachmentNg/e7fd6c70-9adf-4443-a732-8709e67fb979

See Note Table 1.

Figure 1 – Geological Plan Map showing Drilling in Santa Barbara Area with Holes referred to in this release highlighted: https://www.globenewswire.com/NewsRoom/AttachmentNg/01d22763-e26d-4338-a342-dc041040e4e1

Figure 2: Geological Cross of Diamond Drill Holes DSBU-10 and DHK-24 showing Major Higher Grade Feeder Zone: https://www.globenewswire.com/NewsRoom/AttachmentNg/6333376b-47e5-485f-a6dc-564ad6dd358e

Table 3: Summary of Diamond Drill Holes Completed with Assays Pending and Drill Holes in Progress at Iska Iska from July 21, 2022 press release: https://www.globenewswire.com/NewsRoom/AttachmentNg/427b6928-b654-4a12-a8ab-c013ce0c0159

Qualified Person

Dr. Osvaldo Arce, P. Geo., General Manager of Eloro’s Bolivian subsidiary, Minera Tupiza S.R.L., and a Qualified Person in the context of NI 43-101, has reviewed and approved the technical content of this news release.   Dr. Bill Pearson, P.Geo., Executive Vice President Exploration Eloro, and who has more than 45 years of worldwide mining exploration experience, including extensive work in South America, manages the overall technical program, working closely with Dr. Osvaldo Arce, P.Geo. Dr. Quinton Hennigh, P.Geo., Senior Technical Advisor to Eloro and Independent Technical Advisor, Mr. Charley Murahwi P. Geo., FAusIMM of Micon are regularly consulted on technical aspects of the project.

Eloro is utilizing both ALS and AHK for drill core analysis, both of whom are major international accredited laboratories. Drill samples sent to ALS are prepared in both ALS Bolivia Ltda’s preparation facility in Oruro, Bolivia and the preparation facility operated by AHK in Tupiza with pulps sent to the main ALS Global laboratory in Lima for analysis. More recently Eloro has had ALS send pulps to their laboratory at Galway in Ireland. Eloro employs an industry standard QA/QC program with standards, blanks and duplicates inserted into each batch of samples analyzed with selected check samples sent to a separate accredited laboratory.

Drill core samples sent to AHK Laboratories are prepared in a preparation facility installed and managed by AHK in Tupiza with pulps sent to the AHK laboratory in Lima, Peru. Au and Sn analysis on these samples is done by ALS Bolivia Ltda in Lima. Check samples between ALS and AHK are regularly done as a QA/QC check. AHK is following the same analytical protocols used as with ALS and with the same QA/QC protocols. Turnaround time continues to improve, as laboratories return to more normal staffing levels.

About Iska Iska   

Iska Iska silver-tin polymetallic project is a road accessible, royalty-free property, wholly controlled by the Title Holder, Empresa Minera Villegas S.R.L. and is located 48 km north of Tupiza city, in the Sud Chichas Province of the Department of Potosi in southern Bolivia. Eloro has an option to earn a 99% interest in Iska Iska.

Iska Iska is a major silver-tin polymetallic porphyry-epithermal complex associated with a Miocene possibly collapsed/resurgent caldera, emplaced on Ordovician age rocks with major breccia pipes, dacitic domes and hydrothermal breccias. The caldera is 1.6km by 1.8km in dimension with a vertical extent of at least 1km. Mineralization age is similar to Cerro Rico de Potosí and other major deposits such as San Vicente, Chorolque, Tasna and Tatasi located in the same geological trend.

Eloro began underground diamond drilling from the Huayra Kasa underground workings at Iska Iska on September 13, 2020. On November 18, 2020, Eloro announced the discovery of a significant breccia pipe with extensive silver polymetallic mineralization just east of the Huayra Kasa underground workings and a high-grade gold-bismuth zone in the underground workings. On November 24, 2020, Eloro announced the discovery of the SBBP approximately 150m southwest of the Huayra Kasa underground workings.

Subsequently, on January 26, 2021, Eloro announced significant results from the first drilling at the SBBP including the discovery hole DHK-15 which returned 129.60 g Ag eq/t over 257.5m (29.53g Ag/t, 0.078g Au/t, 1.45%Zn, 0.59%Pb, 0.080%Cu, 0.056%Sn, 0.0022%In and 0.0064% Bi from 0.0m to 257.5m. Subsequent drilling has confirmed significant values of Ag-Sn polymetallic mineralization in the SBBP and the adjacent CBP. A substantive mineralized envelope which is open along strike and down-dip extends around both major breccia pipes.   Continuous channel sampling of the Santa Barbara Adit located to the east of SBBP returned 442 g Ag eq/t (164.96 g Ag/t, 0.46%Sn, 3.46% Pb and 0.14% Cu) over 166m including 1,092 g Ag eq/t (446 g Ag/t, 9.03% Pb and 1.16% Sn) over 56.19m. The west end of the adit intersects the end of the SBBP.  

Since the initial discovery hole, Eloro has released a number of significant drill results in the SBBP and the surrounding mineralized envelope which along with geophysical data has defined a target zone 1400m along strike, 500m wide and that extends to a depth of 600m. This zone is open along strike to the northwest and southeast as well as to the southwest. The Company’s nearer term objective is to outline a maiden NI 43-101 compliant mineral resource within this large target area. This work is advancing well with the mineral resource targeted to be completed in Q3 2022. Exploration drilling is also planned on other major targets in the Iska Iska Caldera Complex, including the Porco and Mina 2 areas.

About Eloro Resources Ltd.

Eloro is an exploration and mine development company with a portfolio of gold and base-metal properties in Bolivia, Peru and Quebec. Eloro has an option to acquire a 99% interest in the highly prospective Iska Iska Property, which can be classified as a polymetallic epithermal-porphyry complex, a significant mineral deposit type in the Potosi Department, in southern Bolivia. A recent NI 43-101 Technical Report on Iska Iska, which was completed by Micon International Limited, is available on Eloro’s website and under its filings on SEDAR. Iska Iska is a road-accessible, royalty-free property. Eloro also owns an 82% interest in the La Victoria Gold/Silver Project, located in the North-Central Mineral Belt of Peru some 50 km south of Barrick’s Lagunas Norte Gold Mine and Pan American Silver’s La Arena Gold Mine. La Victoria consists of eight mining concessions and eight mining claims encompassing approximately 89 square kilometres. La Victoria has good infrastructure with access to road, water and electricity and is located at an altitude that ranges from 3,150 m to 4,400 m above sea level.

For further information please contact either Thomas G. Larsen, Chairman and CEO or Jorge Estepa, Vice-President at (416) 868-9168.

Information in this news release may contain forward-looking information. Statements containing forward-looking information express, as at the date of this news release, the Company’s plans, estimates, forecasts, projections, expectations, or beliefs as to future events or results and are believed to be reasonable based on information currently available to the Company. There can be no assurance that forward-looking statements will prove to be accurate. Actual results and future events could differ materially from those anticipated in such statements. Readers should not place undue reliance on forward-looking information.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this release.

Sign up to receive the daily top stories from the Financial Post, a division of Postmedia Network Inc.
A welcome email is on its way. If you don’t see it, please check your junk folder.
The next issue of Financial Post Top Stories will soon be in your inbox.
We encountered an issue signing you up. Please try again
Postmedia is committed to maintaining a lively but civil forum for discussion and encourage all readers to share their views on our articles. Comments may take up to an hour for moderation before appearing on the site. We ask you to keep your comments relevant and respectful. We have enabled email notifications—you will now receive an email if you receive a reply to your comment, there is an update to a comment thread you follow or if a user you follow comments. Visit our Community Guidelines for more information and details on how to adjust your email settings.
365 Bloor Street East, Toronto, Ontario, M4W 3L4
© 2022 Financial Post, a division of Postmedia Network Inc. All rights reserved. Unauthorized distribution, transmission or republication strictly prohibited.
This website uses cookies to personalize your content (including ads), and allows us to analyze our traffic. Read more about cookies here. By continuing to use our site, you agree to our Terms of Service and Privacy Policy.

source

‹ Previous Next ›