Blog

Instagram Tests New 'Live Producer' Tool to Facilitate More Professional Looking IG Live Streams – Social Media Today

Instagram’s looking to help live-stream creators maximize their opportunities with a new Live Producer tool, which will enable in-app broadcasters to stream from a desktop PC, and via various third-party streaming platforms.
As you can see in this example, Live Producer will enable creators to use a stream ‘key’ – a line of program code – to connect into the Instagram Live back-end. That will then enable you to run your content capture through the streaming provider of your choice, with initial support for OBS, Streamyard and Streamlabs, which will then feed into your IG broadcast.
The process will facilitate more professional-looking and customized IG Live streams, with support for multiple cameras, external microphones, graphic overlays, and more.
Though it’s not available to everyone just yet.
As Instagram told TechCrunch, it’s currently only available to a small pool of beta users.
“We are always working on ways to make Instagram Live a meaningful place for shared experiences. We’re now testing a way to allow broadcasters to go Live using streaming software with a small group of partners.”
But it could be a valuable addition, particularly as social apps look to push live shopping as a new opportunity, following the lead of Chinese social apps, where live commerce has become a $300 billion industry.
Indeed, the Chinese version of TikTok, called ‘Douyin’, generated $119 billion worth of product sales via live broadcasts in 2021, a 7x increase year-over-year, while the number of its users engaging with eCommerce live-streams exceeded 384 million, close to half of the platform’s user base.
More recently, the Chinese Government has sought to reign in the sector, and the high prices that influencers are now charging brands for live-stream exposure, which has slowed down its overall growth. But many western social platforms are now also eyeing live commerce as a key opportunity, both to help creators generate more income, and to bring in more direct revenue for themselves.
In some ways, the Chinese example also serves as a cautionary tale, with Chinese regulators additionally seeking to limit the amount that people can spend within streams, and improve age verification for viewers. Those updates are mostly focused on live-stream donation tools, and the obsession that viewers have with streaming celebrities, but they extend to shopping too – while they also highlight the distinct difference between Asian markets and the rest of the world, where live-streaming hasn’t caught on in the same way.
The question, then, is will it ever become a thing, and will people in other regions actually warm to live-stream commerce like they have in China?
On evidence, you would have to say probably not – but then again, there are some streamers who are generating big money from their broadcasts on Twitch and YouTube. 
it’s not about the money.
It’s about sending a message pic.twitter.com/Bz2WXoTSAk
Even if these trends take hold just a little, that could still open up significant opportunities for various apps.
Which is where tools like this could come in handy, while they’ll also enable streamers to establish more professional set-ups for their IG Live broadcasts, which could help them build their following in the app.
We’ll keep you updated on any progress.
Get the free daily newsletter read by industry experts
For months, we’ve all been waiting to hear the verdict on Elon Musk’s $44 billion deal with Twitter. Now, as Musk seeks to terminate this deal, we must wait on the courts to decide the fate of this contract.
Keep up with the story. Subscribe to the Social Media Today free daily newsletter
Keep up with the story. Subscribe to the Social Media Today free daily newsletter
Subscribe to Social Media Today for top news, trends & analysis
Get the free daily newsletter read by industry experts
Want to share a company announcement with your peers?
Get started ➔
For months, we’ve all been waiting to hear the verdict on Elon Musk’s $44 billion deal with Twitter. Now, as Musk seeks to terminate this deal, we must wait on the courts to decide the fate of this contract.
The free newsletter covering the top industry headlines

source

Apple Admits Studio Display Experiencing Speaker Issues, Offers Only Temporary Fix – MacRumors

Apple has admitted that customers using the Studio Display may experience audio-related issues, including sound unexpectedly and abruptly cutting out, audio playing at a high speed, distorted audio quality, and choppy playback.
apple studio display blue
In a memo to authorized service providers, obtained by MacRumors, Apple acknowledges that customers may find themselves facing speaker issues with the company’s $1599 display. Apple says that customers facing issues should unplug the Studio Display from power, unplug any accessories or devices connected to the display, wait ten seconds, then reconnect the Studio Display to power. Apple explicitly notes this is not a hardware problem and implies that a future iOS update may address the issues.
Apple has heavily boasted about the audio, mic, and camera built into the Studio Display. Apple says the speaker system is the “highest‑fidelity speaker system ever created for Mac” and has touted the controversial 12MP built-in camera with Center Stage and the six-speaker array system.
Customers have been reporting both microphone and speaker-related issues with their Studio Display over the last several months, but reports have become more frequent in recent weeks. Michael Tsai this week chronicled some testimonies from customers facing issues, with one customer writing:

The audio on my Studio Display fails intermittently. The only way I can get it to work again is to unplug the display overnight. That resets the display and resolves the problem temporarily. Until the next time. This is simply unacceptable for a $1600 monitor, and Apple should be ashamed of the poor quality control.
Based on the number of customer reports, audio-related issues with the Studio Display do appear to be relatively widespread. Hundreds of customers have taken to Twitter, the Apple Support (1,2,3,4,5) and MacRumors forums (1,2,3) looking for a permanent solution.

Well I just had to reboot my monitor. Welcome to the wonderful world of monitors with chips and (presumably) operating systems. My Apple Display Studio Display was mangling audio this morning. Caused issues for a podcast. Had to reboot the old-fashioned way: power cycling. — John Koetsier (@johnkoetsier) July 28, 2022
Friendly reminder to restart your Studio Display 🤦‍♂️ (cc @internetofshit)https://t.co/k8LCF4QeAu — Kirill Zakharov (@kirillz) July 26, 2022
The speakers in my Studio Display have stopped working. It’s been days. Still can’t get them to work again. — Parker Ortolani (@ParkerOrtolani) July 18, 2022
is anyone else's studio display buggy for video/audio? I just got one and for some reason youtube/music apps freeze or become frequently choppy — Kiran (@neuroswish) July 30, 2022
Studio Display Audio Issues — I had the same issues with my… rebooting a monitoring fix the problems. Just weird to have to reboot a display, though.https://t.co/5kNrRWljEj — A Numeric Citizen (@numericcitizen) July 29, 2022
Since yesterday my Studio Display will only play audio for a few seconds and then it stops. Audio playback works fine on the MacBook Pro that’s connected to the display. Not sure if it’s hardware or software related. I’m running the Ventura beta. Anyone seeing something similar? pic.twitter.com/u4yO1bFubq — Simon B. Støvring (@simonbs) July 28, 2022
I have to restart both my Apple Studio Displays. Otherwise, audio gets choppy and eventually just cuts out completely. Rebooting the Mac doesn't help. You literally have to power cycle the entire Studio Display(s). Happens about every 5-6 weeks for me it seems. https://t.co/Y328O82hV9 — Mario Guzmán (@MarioGuzman) July 26, 2022
Audio recording from my Apple Studio Display microphone is still fundamentally broken in every app. Latest OS and display firmware versions. — Seth Willits (@sethwillits) July 26, 2022
The Studio Display runs iOS and can receive software updates that address problems like this. Apple has attempted to address poor webcam quality with the Studio Display through a software update with mixed results. It seems the company will follow a similar route with audio-related issues. Today’s memo offers no timeframe on when a permanent solution may arrive, but in the meantime customers are advised to ensure their display is updated to the latest firmware.

When will iOS 16 and iPadOS 16 be released? Here’s everything we know.
Apple on July 20 released iOS 15.6 and iPadOS 15.6, bringing improvements to the live sports experience in the TV app and several bug fixes.
Apple Watch SE or Apple Watch 7 – which one to get?
New iPhones are out. Which one should you buy?
Apple is already working on the next-generation versions of iOS 16 and iPadOS 16.
Apple’s next high-end iPhone lineup.
All we know about the next mainstream iPhone models.
The next Apple Watch.
 
MacRumors attracts a broad audience of both consumers and professionals interested in the latest technologies and products. We also boast an active community focused on purchasing decisions and technical aspects of the iPhone, iPod, iPad, and Mac platforms.

source

Podcast Mix Walkthrough – Sound for Video Session

Cassette Recorder Market Size, Outlook And Forecast | DigitNow!,VTOP,Reshow,ION Audio – Shanghaiist – Shanghaiist

“Cassette Recorder
Global Cassette Recorder Market report provides details of new recent developments, trade regulations, import export analysis, production analysis, value chain optimization, market share, impact of domestic and localized market players. This market report also analyses opportunities in terms of emerging revenue pockets, changes in market regulations, strategic market growth analysis, market size, category market growths, application niches and dominance, product approvals, product launches, geographic expansions, technological innovations in the market. To gain more info on the Cassette Recorder market contact Global Market Vision for an Analyst Brief, our team will help you take an informed market decision to achieve market growth.
Get Full PDF Sample Copy of Report: https://globalmarketvision.com/sample_request/35345
Competitive Landscape
The Cassette Recorder market competitive landscape provides details by competitor. Details included are company overview, company financials, revenue generated, market potential, investment in research and development, new market initiatives, regional presence, company strengths and weaknesses, product launch, product width and breadth, application dominance. The above data points provided are only related to the companies’ focus related to Cassette Recorder market.
Leading Key players included in this Report are:
DigitNow!,VTOP,Reshow,ION Audio,AGPTEK.
By Types:
Type I Cassettes, Type II Cassettes
By Applications:
Audio, Broadcasting, Home Use, Others
The analysis and estimates made through exceptional Cassette Recorder report help to get an idea about product launches, future products, joint ventures, marketing strategy, developments, mergers and acquisitions and the effect thereof on sales, marketing, promotions, revenue values, import, export and CAGR. With the latest and up-to-date market insights mentioned in the report, companies can reflect on how to improve their marketing, promotion and sales strategies. The business report helps determine and optimize each stage of the industrial process lifecycle that includes engagement, acquisition, retention, and monetization. The Cassette Recorder Market Research Report
By Region:
Major Points Covered in TOC:
 
 
 
 
 
 
 
Conclusion: At the end of Cassette Recorder Market report, all the findings and estimation are given. It also includes major drivers, and opportunities along with regional analysis. Segment analysis is also providing in terms of type and application both.
Access the full Research Report @ https://globalmarketvision.com/checkout/?currency=USD&type=single_user_license&report_id=35345
If you have any special requirements, please let us know and we will offer you the report at a customized price.
About Global Market Vision
Global Market Vision consists of an ambitious team of young, experienced people who focus on the details and provide the information as per customer’s needs. Information is vital in the business world, and we specialize in disseminating it. Our experts not only have in-depth expertise, but can also create a comprehensive report to help you develop your own business.
With our reports, you can make important tactical business decisions with the certainty that they are based on accurate and well-founded information. Our experts can dispel any concerns or doubts about our accuracy and help you differentiate between reliable and less reliable reports, reducing the risk of making decisions. We can make your decision-making process more precise and increase the probability of success of your goals.
Contact Us
Sarah Ivans | Business Development
Phone: +1-3105055739
Email: [email protected]
Global Market Vision
Website: www.globalmarketvision.com

source

Live stream: Brandi Carlile – ACLTV.com

Austin City Limits is thrilled to announce we will be live streaming our highly-anticipated show with acclaimed singer/songwriter Brandi Carlile on July 13 at 8 pm CT. ACL offers fans worldwide the unique opportunity to watch this taping live here in its entirety on our ACLTV YouTube Channel. The broadcast episode will air this fall on PBS as part of our upcoming Season 48.  
For her third taping, Brandi Carlile returns as a six-time GRAMMY Award-winning singer, songwriter, performer, producer, #1 New York Times Bestselling author and activist, who is known as one of music’s most respected voices. Her latest album, In These Silent Days, debuted at #1 on Billboard’s Americana/Folk Albums chart, Top Rock Albums chart and Tastemaker Albums chart and continues to receive overwhelming acclaim. Produced by Dave Cobb and Shooter Jennings, In These Silent Days was inspired by the mining of Carlile’s own history while writing last year’s #1 New York Times Best Selling memoir, Broken Horses (Crown), and conceived of while she was quarantined at home with longtime collaborators and bandmates Tim and Phil Hanseroth. The ten songs chronicle acceptance, faith, loss and love and channel icons like David Bowie, Freddie Mercury, Elton John and Joni Mitchell—the latter two who, by some sort of cosmic alignment of the stars, have turned out to be close friends in addition to being her biggest heroes and inspirations. Of the album, Variety praises, “Carlile effortlessly glides between octaves while, somehow, still sounding completely conversational—the everyday diva we didn’t know we needed until she showed up at our door…a vocal tour de force,” while Billboard asserts, “the emotion that Carlile projects is unbridled, unfettered joy in the face of hard times—and it’s the exact boost of positivity that will make you want to listen again and again.” The New York Times writes, “Larger than life and achingly human…she empathizes, apologizes and lays out accusations. She’s righteous and she’s self-doubting. She proffers fond lullabies and she unleashes full-throated screams,” while NPR Music declares, “absolutely breathtaking, across the whole album Brandi Carlile pulls out all the stops. It’s just extraordinary…she’s just claiming rock god status.” In addition to her six GRAMMY Awards, Carlile has also been recognized with Billboard’s Women In Music “Trailblazer Award,” CMT’s Next Women of Country “Impact Award” and received multiple recognitions from the Americana Music Association Honors & Awards including Artist of the Year for the past two years. 
Join us here on July 13 at 8 p.m. CT for Brandi Carlile, and this fall on PBS for the broadcast premiere of Austin City Limits’ upcoming Season 48.  
© 2022 Austin PBS, KLRU-TV
Austin City Limits is a production of Austin PBS, KLRU-TV
Unless otherwise noted all photos © Austin PBS, KLRU-TV by Scott Newton

source

Beyond Cork Taint, Diam Enables Winemakers to Master How Oxygen Permeability and Time Interacts with Their Wine – wineindustryadvisor.com


The proper control of O2 levels lies at the heart of modern oenology
When winemakers put the cork in a bottle of wine, their job is done. It’s their last oenological act; after that, it’s up to the cork.
In the past, using a piece of cork was a random act of hope — the cork could be very tight or very loose, and the winemaker could be lucky or unlucky. After 5 or 6 years of aging, the result could be reductive bottles, perfect bottles or oxidized bottles — or all three in the same batch. And, the unfortunate part is when consumers experience this fault, they assume it’s the wine style they do not like.
“The amount of oxygen that penetrates the cork directly affects the aging of the wine,” says François Margot, “so it is essential to consistently control the flow of oxygen.” Margot is the North American Sales Manager for Diam Bouchage, a global leader in technological corking solutions for still and sparkling wines and spirits.
“When you use a piece of cork bark, this elasticity will vary from cork to cork and decrease over time,” he explains. “A high elasticity cork will take many years before the elasticity breaks down. When it does, the pressure against the glass decreases as time goes on, and then oxygen goes around the cork instead of through it, oxidizing your wine.”
Twenty years ago, TCA contamination almost spelled the end of cork closures, and winemakers lost confidence in this natural and sustainable material.
Diam Bouchage pioneered a technology to eliminate cork taint — and ended up giving winemakers a revolutionary new oenological tool to control the flow of oxygen during wine maturation. Instead of random elasticity, the company engineered the cork by granulating it, removing the woody parts, and disinfecting it to remove more than 150 molecules, thus purifying the cork of TCA and other contaminants.
The Diam technology also enabled Diam Bouchage to guarantee the cork’s elasticity and how much oxygen would penetrate the cork. As a result, winemakers can now choose the optimal maturity time of 2, 3, 5, 10 or 30 years for their wine and be confident that the engineered Diam cork will do its job without early oxidization or potential reduction. Diam’s sustainable corking solution, Origine® by Diam, is a bio-sourced cork that offers different permeability options to control wine aging with ranges from 5, 10, and 30 years for still wines.

“It’s not enough to say, ‘my cork controls oxygen transfer,’” says Margot. “We need to guarantee that the oxygen will be controlled over time. If the winemaker needs 30 years of aging, they need to be confident that the oxygen transfer will be stable for 30 years.”
The development of the Diam technology changed the market, and Diam Bouchage is now number one globally for technological closures.

Further evolution of this technologically-advanced cork enables winemakers to select the optimal contribution of oxygen in two phases — releasing the oxygen from inside the cork: OIR (Oxygen Initial Release), followed by oxygen transfer through the cork over time: OTR (Oxygen Transmission Rate).
“We engineered the cork so the winemaker can choose not only how long the cork will do the job but also how much oxygen will pass through the cork each day,” Margot notes. “The winemaker now has an oenological tool that lets them bottle the same wine on the same day with different Diam corks to achieve differentiated goals instead of using a cork and hoping for the best.”
This phased control of oxygen allows winemakers to fine-tune the development of aromas during the wine maturation process.
“Choosing a cork to control oxygen levels in the bottle properly means controlling both the color and aromatic profile of the wine,” adds Diam’s R&D director, Christophe Loisel, “as well as reducing SO2 levels while respecting the quality of wine as it matures.”
Diam Bouchage continues to expand the oenological tools available to winemakers giving them the power to choose what best suits their wines.
Diam, the power of choice.
G3 Enterprises is the exclusive distributor for Diam in North America, to learn more about Diam contact G3, www.g3enterprises.com/contact.






This site uses Akismet to reduce spam. Learn how your comment data is processed.
Accessibility Tools

source

Lirase questions reality in 'Don't know' – GhanaWeb

Lirase questions reality in ‘Don’t know’  GhanaWeb
source

The ultimate guide to sub bass: tips and tricks for a high-class low-end – MusicRadar

MusicRadar is supported by its audience. When you purchase through links on our site, we may earn an affiliate commission. Here’s why you can trust us.
By ( , , ) published
When it comes to music designed for a powerful sound system, nailing your sub can be what makes or breaks your track
Dealing with sub bass frequencies can be one of the trickier aspects of music production. A sub bass part can be elusive – tough to properly monitor in a home setup, often not reproduced at all by smaller speakers – and they can be very hard work to mix. But, particularly when it comes to dance music designed for a powerful sound system, nailing your sub can be what makes or breaks your track.
IN THIS SUB BASS GUIDE

• How to monitor sub bass in a home studio setup
• Splitting sub bass into separate bands for precise mixing
• 12 of the best sub bass plugins

Put simply, sub bass is anything that happens in the lower end of the bass frequency spectrum. The exact definition of sub bass tends to change depending on who you ask, but it’s generally considered to be anything below around 60Hz-80Hz, reaching down to 20Hz, which is the lowest frequency audible to the human ear. For context, the lowest note of a bass guitar is around 41Hz, and the lowest note on a piano is around 27.5Hz.
The sub frequencies define the power and weight of a track – too little and a mix can feel weak and underpowered
Sub bass frequencies are often felt more than they are heard, but that doesn’t mean you can disregard what’s going on down there. It’s in this range that most synthesised basslines have their fundamental frequencies (commonly around 40Hz-80Hz). The sub frequencies also define the power and weight of a track – too little and a mix can feel weak and underpowered, too much and things can quickly become overblown and overpowered.
Over the years, sub bass has become increasingly important in dance music, since these are electronic genres largely designed to be heard on powerful club systems that bring these frequencies to the forefront. Back in the ’90s, jungle and drum & bass producers would use the Akai S-Series sampler’s sine waveform ‘test tone’ played back on a low octave to create sub basslines. In hip-hop production, a sampled and pitched version of an 808 kick has become a pretty much ubiquitous method for creating powerful, sub-focused basslines.808sonible8 sure-fire ways to fix the balance of your bass
The focus on subs probably reached its peak with dubstep – we’re talking about the earlier, UK-centric genre here, as opposed to the US-exported EDM version – which combined spacious, half-time beats and dub-like effects with huge, chest-rattling bass designed to be experienced on a powerful club sound system. While these purely sub-focused sounds have arguably receded a little in the past decade, sub frequencies remain a huge part of dance music production. Modern techno, for example, makes use of sub-heavy kicks and low-end ‘rumble’ to create an overall dark and powerful sound.
One key problem when it comes to working with sub elements is how poorly they’re reproduced away from club sound systems. Those early jungle and DnB tracks we mentioned before, for example, seem to lose their basslines completely when played on smaller speaker systems. There are times when this can be used to an advantage – think of times you’ve heard a great dance track first at home, then heard it again in a club and suddenly picked out whole new elements you didn’t hear before…
It’s a challenge to create powerful, club-ready sub elements that will work well in a club environment but can still be heard on smaller speaker systems
However, most of the time it’s a challenge to create powerful, club-ready sub elements that will work well in a club environment but can still be heard on smaller speaker systems. Arguably, it’s exactly this conundrum that triggered dubstep’s shift away from its club-centric UK sounds to the full-frequency bass styles of artists like Skrillex, which trade the spaciousness for aggressive mid-range parts that sound ‘heavy’ even on a phone or laptop speaker.
The other aspect that makes subs tricky from a production point of view is working out how to monitor them properly in a small studio setup, such as a home or project studio. Even without a sub speaker, decent monitor speakers will reproduce low frequencies far better than many standard stereo setups, but sub bass can still get lost easily at lower volumes. 
What’s more, due to their low frequencies, sub parts can create what’s known as ‘standing waves’. The result of this is that, even if you can fully reproduce those low frequencies, in a less than perfect studio space certain pitches in the sub region will sound far louder than others, and might not accurately represent how a track will translate to a club environment. We delve into ways to monitor your subs at home later in the feature.
Subs are relatively simple sounds but, as they’re such an important element of a mix, it’s essential to get them spot-on. At a basic level, a pure and clean sine wave tends to work best as a basic sub tone – incredibly easy to create in most synths. However, minute adjustments to a sub patch’s amplitude envelope attack and release times can be necessary to stop it from having unwanted clicks at the start and end of each note.
You may need to tweak release times further when you actually get round to programming your sub’s MIDI part: it’s not always best to program your sub note’s legato, as space between notes, however small, might be what your bassline needs to have the right groove. In this case it’s worth experimenting with different release times (and if available, envelope curve shapes) to see what settings work best. 
Space between notes, however small, might be what your bassline needs to have the right groove
It’s also worth trying out the available voicing modes on offer, because in some cases – depending on how your synth’s envelopes work – you might actually find you get a better feel from polyphonic mode. Just be careful not to overlap notes in this scenario, because it’ll sound muddy and eat up headroom like nobody’s business!
It’s also a good idea to experiment with the possibilities afforded by amplitude level and pitch modulation. Depending on how busy the rest of your mix is, you might find that assigning an LFO to your sub’s pitch can provide some welcome extra rhythm and give your bass part a more vibey, organic feel. 
To get a good combination of weight and space, drop your sub’s pitch and amplitude level with an envelope, which results in a Roland TR-808-style kick drum sound.
A pitch sweep is a good method for expanding a simple sub sound so that at least some element of it will cut through on a weaker sound system. Beyond this, the simplest way to make a sub audible over a smaller speaker system is to add some additional harmonic content.reeseHow to create a classic old-school Reese bass sound
You could approach this by simply doubling your sound with one pitched an octave or two higher. The better approach is often to create a sound with a little more harmonic richness at source. A basic sine wave is the simplest tone, with little in the way of overtones. Moving to shapes like square or saw waves introduces new harmonic overtones above the root sub that will be audible even when the fundamental isn’t. 
A classic Reese bass – named after an alias of Detroit icon Kevin Saunderson – is the perfect example of this, using two detuned saw waves to create a bass sound with plenty of sub energy but also just enough overtones to add plenty of mix presence.  
Distortion can be a great tool for emphasising overtones in bass, too. At its simplest, pushing a sine wave sub through a distortion effect can add square wave characteristics. This can be a great approach used on something like an 808 bass, in order to add a bit of additional mid-range grit and presence to an otherwise low end focused sound.
Current page: The ultimate guide to sub bass
Future Music is the number one magazine for today’s producers. Packed with technique and technology we’ll help you make great new music. All-access artist interviews, in-depth gear reviews, essential production tutorials and much more. Every marvellous monthly edition features reliable reviews of the latest and greatest hardware and software technology and techniques, unparalleled advice, in-depth interviews, sensational free samples and so much more to improve the experience and outcome of your music-making.
Don’t miss the latest deals, news, reviews, features and tutorials
Thank you for signing up to Musicradar. You will receive a verification email shortly.
There was a problem. Please refresh the page and try again.
MusicRadar is part of Future plc, an international media group and leading digital publisher. Visit our corporate site (opens in new tab).
© Future Publishing Limited Quay House, The Ambury, Bath BA1 1UA. All rights reserved. England and Wales company registration number 2008885.

source

Live Streaming Software Market to See Huge Growth by 2027 : Youtube, Facebook, Tencent – Digital Journal

Hi, what are you looking for?
By
Published
The latest study released on the Global Live Streaming Software Market by AMA Research evaluates market size, trend, and forecast to 2027. The Live Streaming Software market study covers significant research data and proofs to be a handy resource document for managers, analysts, industry experts and other key people to have ready-to-access and self-analyzed study to help understand market trends, growth drivers, opportunities and upcoming challenges and about the competitors.
Key Players in This Report Include:
Alibaba Cloud (China), Brightcove (United States), Youtube (United States), SplitmediaLabs (Philippines), Facebook (United States), Tencent (China), Periscope (United States), BlueJeans Network (United States), DaCAst (United States), AWS (United States),
Download Sample Report PDF (Including Full TOC, Table & Figures) @ https://www.advancemarketanalytics.com/sample-report/10937-global-live-streaming-software-market-1
Definition:
The live streaming software is live broadcasting of videos over the internet. Through which people and brands communicate all over the globe. There are two main parameters of focus in live streaming software the preview window and your output window. Today, almost every social media platform supports live streaming to interface with the audience. Live streaming offers endless content accessible with web and mobile devices. The rapid change in the entertainment medium has made leaders engage with their audience.
Market Trends:
Leaning Demand for OTT Adoption
Increased Live Streaming In Internal Corporate Communications
Emerge Of Live Streaming In Music Industries
Market Drivers:
Increase Demand in Real-Time Broadcasting in Entertainment Sector
Huge Internet Penetration
Expansion of Social Media Platforms
Increase Adoption of Smartphones
Market Opportunities:
Increasing Real Estate Companies towards Broadcasting Auctions
Rise in Product Launch Events on Live Streaming By Retail Companies
Increasing Celebratory Events, Sports, Movies, and Web Series
The Global Live Streaming Software Market segments and Market Data Break Down are illuminated below:
by Application (Churches, Education, Gaming, Live Events, Meeting & Presentations, Sports, Other), Services (Professional, Managed), Platforms (Laptops & Desktops, Smartphones & Tablets, Smart TV, Others)
Global Live Streaming Software market report highlights information regarding the current and future industry trends, growth patterns, as well as it offers business strategies to helps the stakeholders in making sound decisions that may help to ensure the profit trajectory over the forecast years.
Have a query? Market an enquiry before purchase @ https://www.advancemarketanalytics.com/enquiry-before-buy/10937-global-live-streaming-software-market-1
Geographically, the detailed analysis of consumption, revenue, market share, and growth rate of the following regions:
Objectives of the Report
Buy Complete Assessment of Live Streaming Software market Now @ https://www.advancemarketanalytics.com/buy-now?format=1&report=10937
Major highlights from Table of Contents:
Live Streaming Software Market Study Coverage:
Browse Complete Summary and Table of Content @ https://www.advancemarketanalytics.com/reports/10937-global-live-streaming-software-market-1
Key questions answered
Thanks for reading this article; you can also get individual chapter wise section or region wise report version like North America, Middle East, Africa, Europe or LATAM, Southeast Asia.
Contact US:
Craig Francis (PR & Marketing Manager)
AMA Research & Media LLP
Unit No. 429, Parsonage Road Edison, NJ
New Jersey USA – 08837
Phone: +1 (206) 317 1218
[email protected]

Connect with us at
https://www.linkedin.com/company/advance-market-analytics
https://www.facebook.com/AMA-Research-Media-LLP-344722399585916
https://twitter.com/amareport
 

Be careful what you wish for. You might have to live with it.
Paul and Tracy Naggear hold a framed drawing for their late daughter Alexandra, who was killed in the Beirut port blast of August 2020…
Southeast Asian foreign ministers will seek ways to help calm rising tensions over Taiwan at regional talks Wednesday.
She’s southern Iraq’s celebrity photographer, a former political prisoner who has spent more than 60 years behind the lens.
COPYRIGHT © 1998 – 2022 DIGITAL JOURNAL INC. Digital Journal is not responsible for the content of external sites. Read more about our external linking.

source

First Look: Black Adam Action Figures & Toy Lines From Spin Master [EXCLUSIVE] – Screen Rant

EXCLUSIVE first look images and photos of the Black Adam toys from Spin Master featuring heroes from the upcoming DCEU film starring Dwayne Johnson.
Spin Master and DC Comics are teaming up for a brand new line of action figures for the upcoming Black Adam DCEU film, which will bring the JSA heroes to life. Screen Rant has the exclusive first look at the new Black Adam toys for the forthcoming blockbuster starring Dwayne Johnson, giving fans a closer look at some of the characters set to debut in the much-anticipated superhero film.
Dwayne Johnson is set to play Black Adam in the self-titled film in the DCEU, marking the first time the actor has portrayed a superhero in the DC Universe. Johnson will be joined by an ensemble cast including Aldis Hodge as Hawkman, Noah Centineo as Atom Smasher, Sarah Shahi as Adriana Tomaz, Quintessa Swindell as Cyclone, Pierce Brosnan as Dr. Fate, and Marwan Kenzari as the villain Sabbac. The Jaume Collet-Serra-directed film will see the Justice Society of America and Black Adam team up against a demonic threat as the antihero defends his home of Kahndaq.
Related: The Rock Applied The Pressure WB Needs To Bring Back Cavill’s Superman
Spin Master’s Black Adam line showcases the film’s heroes in action and include highly-detailed 4-inch and 12-inch figures of Black Adam, Hawkman, Dr. Fate, Atom Smasher, and Cyclone, with each figure coming with accessories. There’s also the Hawk Cruiser and a special feature figure for the title character. See below for our exclusive imagery and photos.
MSRP: $8.99; Age: 3+
The 4-inch figures are the perfect size for the Hawk Cruiser, a 16-inch wide vehicle that can fit the figures. In addition, the toy features a detailed sculpt that brings Hawkman’s vehicle from the Black Adam film to life. The Hawk Cruiser retails for $34.99 and comes with both a Black Adam and Hawkman 4-inch figure.
MSRP: $34.99; Age: 4+
MSRP: $10.49; Age: 3+
Spin Master is also releasing new 12-inch action figures of Black Adam, Dr. Fate, Cyclone, Atom Smasher, and Hawkman. Each of the toys has 11 points of articulation and features a sculpt that showcases each of the DCEU hero’s upcoming looks. The figures will retail for $10.49.
MSRP: $24.99; Age: 4+
Additionally, Black Adam will get another 12-inch feature figure. The antihero will throw a punch when his legs are squeezed with his logo lighting up and playing movie sounds. The $24.99 action figure comes with two energy accessories that create different sounds and lighting.
The new Black Adam line of action figures from Spin Master will start to roll out in stores throughout August and will be fully available at Target, Walmart, and Amazon in October. Black Adam starring Dwayne Johnson, arrives in movie theaters on October 21, 2022.
As the slave who became an unchosen Champion, Teth-Adam was bestowed the almighty powers of the gods before freeing his people from oppression. Entombed for five thousand years, he is finally awoken–and ready to unleash his vengeful fury on the modern world as Black Adam.
Next: Black Adam Star Explains How Atom Smasher Is Different From The Comics
Lead writer for Screen Rant’s comic team. [email protected]. Find him on Twitter @LiamRMcGuire for comic news and reporting.

source

"This is Formula E and anything can happen" – Mercedes EQ's Ian James – The Checkered Flag

The Mercedes-EQ Formula E Team are on the brink of claiming the Constructors’ Championship, after a strong weekend at the London E-Prix sees them take a thirty-five point margin in the season finale in South Korea.
It’s not just joy for the team in the Constructors’, there is also reason for the team to celebrate the current Drivers’ standings, as Stoffel Vandoorne extended his lead to thirty-six points from Mitch Evans.
Vandoorne had a strong weekend, after finishing second in Race One, and then recovering to fourth-place in Race Two. Sunday’s race especially was a champion’s drive by the Belgian driver, who finished fourth despite having started thirteenth. None of his title rivals could capitalise on his poor Qualifying on Sunday, as they all failed to finish in the points.
Nyck de Vries‘ weekend ended better than it started, after being awarded a five-second penalty late on in Race One for moving under braking whilst defending third-place from Nick Cassidy. The penalty saw De Vries drop off the podium, much to his disappointment. He made up for it in Race Two, where this time he finished third but wasn’t awarded with a late penalty.
Mercedes-EQ Team Principal Ian James was very pleased with the team’s “healthy haul of points” across the weekend, but is aware that anything can still happen.
“We wrap up the weekend in London with a very healthy haul of points. Today’s race was always going to be challenging, with Nyck and Stoffel starting P5 and P13 respectively.
 
“Nyck was in a position to capitalise and go for a podium finish – and he did just that. He put in an amazing drive and ended up on the podium, really well deserved. Stoffel fought every turn, every pass of that race. He used all of his race craft to finish 4th. To come from 13th to 4th is awesome, especially here in London. Others had some misfortune and, as racers, we can feel the pain but it worked in our favour today.

 
“We are now almost at the end of the season, with just one race weekend and two races to go. We have a small advantage to our competitors – in both teams’ and drivers’ standings, but this is Formula E and anything can happen. There is no excuse and no margin for mistakes; it is going to be full focus, delivering another weekend in which we are on the case every single session, every single lap.”
©Copyright MMXXI – The Checkered Flag – All Rights Reserved

source

This Portlander's Side Hustle of Making Wine Has Grown Into a Full-Fledged Business – Portland Monthly

Portland Monthly
921 SW Washington Street, Suite 750 Portland, OR 97205
Phone: 503-222-5144 • Fax: 503-227-8777
By Matthew Trueherz August 2, 2022
Tyler Magyar’s side hustle making wine has grown into a full-fledged business.
Image: Courtesy Tyler Magyar
“Can you do it on top of your day job?” That’s the perennial question Tyler Magyar asks himself when deciding how many grapes to order for next year’s harvest. Magyar, who owns the local natural wine producer Monument (who’s rosé “Jenny” came out on the top of Portland Monthly’s review of 10 local Oregon rosés) also works full-time as the wine buyer for the Pearl District international grocer World Foods.  
In today’s market of side-hustles, the gig economy, and DIY-ing . . . everything, wine might seem too gatekept an industry to break into as a passion project. You need the funds—the generational wealth; wine is expensive and sophisticated, made by people in drapey white linen with loafers and perpetually wet hair, no? 
“Well, I am wearing a blue linen shirt today,” Magyar quips. 
Magyar didn’t grow up in a Burgundian vineyard or on an estate in the Napa Valley but on the Jersey Shore, where it seemed like half the town took the train to their jobs on Wall Street. “I grew up in shops,” he says. Through watching his father, a chocolatier, work all night to make bunnies on the eve of Easter, Magyar learned how much joy there was in sharing a passion with patrons. (“It was to make money, sure, but he loved it.”) 
Culturally, wine’s never had the social bar to entry for Magyar that some place on it; instead, he sees it simply as a specialty product, like his dad’s chocolates or boutique candles or bread from a favorite bakery. “If your point of entry is: ‘this guy really loves something—he carved a space for a thing,’ you get to forego a little bit of the pretense,” he says. 
As a teenager, he translated the sentiment to the world he lusted after: record stores and video shops, envying the unparalleled clout of twenty-somethings that embodied magazines like Spin and NME. He longed to breach an insular community of obsessive—to be the one recommending Fugazi. “High Fidelity, the video store . . . all of that,” he says. (He’d like to be John Cusack, but says he’s probably more Jack Black.) 
Friends describe Magyar as “an eccentric.” “Tyler’s maybe one of the most passionate people I know,” says Lisa Nguyen, who manages the natural wine bottle shop Ardor in Southeast Portland. She says he’s like a theater geek—extremely earnest. 
Before making wine, most of Magyar’s time was devoted to “soaking up knowledge,” to becoming some version of the record store employee. He moved to New York City after high school to study “Arts and Contexts” at The New School, while working in the cellar of a wine store, stealing underaged sips where he could. “The college major was: be interesting at a dinner party,” he says. A year-long internship at Food and Wine followed school, but that job trajectory ended with the financial crisis in 2008.  
On a whim, he took a job as a nanny in Paris and “hid” from New York City living costs for a few years, all the while becoming acquainted with the casual wine culture in France.  
After his au pair sojourn, back in New York, back in wine shops, Magyar started to see accessibly priced Oregon wines from producers like Fausse Piste and Bow & Arrow. “Labels that shouted something different than ‘I’m fancy,’ or ‘I’m affordable’; they had personality and grit,” he says. It was here that he first saw wine through the lens of professional appreciator: “They reminded me of wines in France that were sold by the equivalent of a punk rock salesperson at the record store, that movie nerd at Blockbuster, my dad making chocolates. . . .”  
Scott Frank, the winemaker behind Bow & Arrow, now a friend of Magyar’s, says they share this language of metaphor. “It’s just so easy; if music shaped your life when you were young—informed how you dressed and who you hung out with and was the emotional core of your teenage existence. . . . I know exactly what he means when he says the ‘Fugazi of wine.’ That’s all freaking . . . that’s all killer no filler, you know?” 
Regardless of his feelings about who was allowed to enjoy wine—to drink it and sell it and talk about it—when a friend mentioned the concept of making wine to Magyar, he was full of culturally-imposed doubts: “I don’t have the money; I’m not that serious; I can’t jump over that barrier to entry; and I’m not a white table cloth guy!” 
His first harvest was with Andy Young who owns The Marigny winery in the Willamette Valley. Almost instantaneously, the rush of the process took hold of him. Young had moved into the city for the season to make wine in a space in Sellwood. “What was a light agreement of ‘one to two days a week . . . or something like that’ turned into him helping me every day through the entire 2017 harvest,” says Young. Magyar would leave his day job in the evenings, bike 45 minutes down the Springwater Corridor to the winery, make wine all night, then bike back to the city with a corkscrew between his fingers (“in case someone tried to attack me”), nap under his boss’s desk, and repeat.  
The next year, Young lent him a small space to experiment with a batch of wine. His third year making wine, 2018, was Monument’s inaugural commercial production. The fever-dream feeling compounded: every year his production grew and all of the sudden, without leaving his day job, Magyar had a winery.  
“And at that point, you cash out the 401k from your last job and everything becomes a little more real . . . and then harvest again rolls around,” he says. Now, the days of working around the clock and dangerous midnight bike commutes are behind him, sort of. His operation still has its quirks. As a, négociant, or winemaker who buys grapes in lieu of growing them, Magyar’s system involves rented Penske trucks and tents, sleeping on vineyards and helping with the 10–12 ton harvest. Which of course, is only the beginning of the demanding process of preparing and crushing the grapes.  
“My space looks like a warehouse because it is a warehouse,” says Magyar. He works out of the same space in Sellwood that Young invited him into years ago (“between the Goodwill bins and the Acropolis strip club”). He shares the warehouse, a forklift, and some grape processing equipment with local wineries Flat Brim and Fausse Piste—the same label that sparked his imagination from across the country a decade ago. He jokes about the “native yeasts” of the space, the terroir of the storage facility they took over from a property management company, where the belongings of evicted tenants were once held.  
A selection of Magyar’s wines.
Image: Courtesy Tyler Magyar
Monument produces exclusively natural wines, a term that’s rich in connotations, but simply means they’re made without additional yeast to jump-start fermentation. Instead, the crushed, pesticide-free grapes ferment via “wild” yeasts—what’s naturally in the air. Magyar calls them “the goblins.” Sulfur is the only addition, which helps stabilize the wine as it travels and ages. 
Everything orange and skin contact is no doubt enjoying a vogue of trendy ignorance (“bring us whatever’s funkiest!”), but Magyar is most interested in the politics of the process, valuing the safety it promises the farmers he works with. The goal of Monument is to make approachable natural wines, “wines that are pleasant enough for your mother-in-law to enjoy. But with the aesthetic and feel, the realness and aliveness of those wines that I’ve sold for so long,” says Magyar. 
Monument’s 2021 vintage, 750 cases of wine made from 20,000 pounds of fruit, cost Magyar half the salary of his day job to produce. A small-ish production relative to other producers, but multiple flatbed trucks of grapes dwarf most people’s hobby closets. (Bow & Arrow, by contrast, produces just over 5,000 cases per season, the threshold of what Frank says allows him to still have his hands in things.) In spite of limited numbers, Magyar’s wines are distributed across Oregon, in New York, Chicago, Washington DC, and as far as South Korea.  
Scale of course, is a necessity of running a business. The hustle of punching your way into an industry is too. But both Frank and Young are most taken by the quality of Magyar’s wines. “The good ones get their personality into that bottle somehow. I was always looking for Tyler’s exuberance and his personality to find a way into the wine. And they did,” says Frank.  
“What’s hardest is capturing people’s imagination, creating something that’s just different enough to stand on its own,” adds Young.  
Magyar’s not sure if he’ll ever only make wine, but he does struggle to keep straight which of his careers he’s moonlighting in. “And then I have this side job,” he says, laughing before halfheartedly correcting himself: “It’s not a side job, it’s a career I have.”    
Wine
08/02/2022 With Portland Monthly Staff
Oregon Wine 2019
09/23/2019 By Jane Smith Edited by Ramona DeNies
Wine Picks
09/13/2017 By Benjamin Tepler
Vine of the Times
09/13/2017 By Chad Walsh

source

Lectrosonics Debuts LectroU Online Training Course Series – Live Design

source

Danley Sound Labs Announces Ohio Road Show Event – Live Design

source

John Coltrane’s Seminal Blue Train Gets Both 180g 1LP Mono & 2LP Stereo Tone Poet Audiophile Vinyl Series Reissues From Blue Note on September 16 – AnalogPlanet.com


John Coltrane’s all-time hard-bop classic, January 1958’s Blue Train, is coming back around the vinyl bend. To mark the 65th anniversary of the album’s recording, Blue Train will be released in two special editions on September 16, 2022, as part of Blue Note’s Tone Poet Audiophile Vinyl Reissue Series.
A 1LP mono pressing of the original album will be presented in a deluxe gatefold tip-on jacket, while the 2LP stereo collection dubbed Blue Train: The Complete Masters will include a second disc featuring seven alternate and incomplete takes, none of which have been released previously on vinyl, and four of which have never been released before on any format.
To get a taste of The Complete Masters, check out “Blue Train (Alternate Take 8)” below. . .

The Complete Masters comes with a booklet featuring never-before-seen session photos by Francis Wolff and an essay by Coltrane expert Ashley Kahn. Both Tone Poet Vinyl Editions were produced by Joe Harley, mastered by Kevin Gray from the original analog master tapes, and pressed on 180g vinyl at RTI.
The recording facts are these: On September 15, 1957, John Coltrane went into Rudy Van Gelder’s living room studio in Hackensack, New Jersey, and recorded his first great masterpiece, Blue Train. The fulfillment of a handshake deal Coltrane made with Blue Note co-founder Alfred Lion, this would be the saxophonist’s sole session as a leader for Blue Note Records, a locomotive-paced five-track album fueled by the bluesy title track that featured a dynamic sextet consisting of Trane on tenor sax, Lee Morgan on trumpet, Curtis Fuller on trombone, Kenny Drew on piano, Paul Chambers on bass, and Philly Joe Jones on drums.
 0801.apnews.coltrane.bluetrain.stereocover2.jpg
Blue Train established Coltrane as a force of nature, setting him on a course towards becoming one of the most revered and influential jazz artists of all-time. (Remember what followed, just 2 years later? February 1960’s even more seminal Giant Steps.)
According to producer Joe Harley, Blue Train is an all-time masterwork (and I must concur). “Few studio experiences I’ve had can compare with the thrill of listening to the original master tapes — mono, stereo, and alternate takes — of Blue Train,” Harley observed. “I consider these two new versions the definitive editions of this masterpiece performance by John Coltrane.”
 0801.apnews.coltrane.bluetrain.monocover2.jpg
Blue Train came at a pivotal moment in Coltrane’s career. Earlier in 1957, the saxophonist had hit bottom when his heroin addiction caused him to be fired from the Miles Davis Quintet. After kicking his habit, Coltrane returned with a fervor, inspired by an extended summer residency with Thelonious Monk at the Five Spot Café, located at 5 Cooper Square in New York City (a.k.a., the Bowery). By the end of the year, Coltrane had been rehired by Davis and had produced Blue Train, an album even he was admittedly deeply proud of.
As Ashley Kahn recounts in the included essay, “Blue Train was a recording that Coltrane, ever self-critical and modest, held in high regard. In 1960, while on tour with Miles Davis for the last time, a Swedish deejay asked Coltrane what he favored from his catalogue and he immediately responded: ‘Oh, I like Blue Train myself. It’s a good band on there, you know. It was a good recording.’” (Now, there’s an understatement, if ever I’ve heard/read one. . .)

Music Direct Buy It Now

JOHN COLTRANE
BLUE TRAIN: THE COMPLETE MASTERS

2LP Stereo (Blue Note)
 0801.apnews.coltrane.bluetrain.stereolparray2.jpg
Side A
Blue Train (Coltrane) – 10:43
Moment’s Notice (Coltrane) – 9:10
Side B
Locomotion (Coltrane) – 7:14
I’m Old Fashioned (Kern-Mercer) – 7:58
Lazy Bird (Coltrane) – 7:07
Side C
Blue Train false start * – 0:21
Blue Train alternate take 7 * – 7:09
Moment’s Notice alternate take 4 * – 7:19
Lazy Bird alternate take 1 – 9:22
Side D
Blue Train alternate take 8 – 10:27
Moment’s Notice alternate take 5A (incomplete) * – 5:08
Lazy Bird alternate take 2 – 7:29
* previously unreleased
updated with corrected side breaks (Side C & Side D) per Blue Note, 08.02.2022
 0801.apnews.coltrane.bluetrain.monolparray2.jpg
JOHN COLTRANE
BLUE TRAIN

1LP Mono (Blue Note)
Side A
Blue Train (Coltrane) – 10:43
Moment’s Notice (Coltrane) – 9:10
Side B
Locomotion (Coltrane) – 7:14
I’m Old Fashioned (Kern-Mercer) – 7:58
Lazy Bird (Coltrane) – 7:07
 0801.apnews.johncoltrane_bluest_franciswolff2.jpg

John Coltrane, deep in blue thought. Photo by Francis Wolff.

ALBUM CREDITS
John Coltrane, tenor saxophone
Lee Morgan, trumpet
Curtis Fuller, trombone
Kenny Drew, piano
Paul Chambers, bass
Philly Joe Jones, drums
Original session produced by Alfred Lion
Recorded on September 15, 1957, at
Van Gelder Studios, Hackensack, New Jersey
Recording Engineer: Rudy Van Gelder
Cover Design: Reid Miles
Photography: Francis Wolff
LP Supervision: Joe Harley
LP Mastering: Kevin Gray, Cohearent Audio

COMMENTS

Russo7516's picture

Is there and digital parts to these lp’s . Cause now we have to ask after No MoreFi .
Sorry

Happy Will's picture

There is a 45 rpm Audiophile video interview on YouTube with Joe Harly and Kevin Gray that covers this question.

volvic's picture

Was deep in the Montana forests and hills vacationing when the email announcement came through. Stopped the hike and ordered both. Stoked, can’t wait for them to arrive.

Tom L's picture

“mastered by Kevin Gray from the original analog master tapes” but as we know that doesn’t mean there were no digital steps involved. I’m buying the 2 LP version anyway.

Russo7516's picture

I had to ask this question given the current climate. Sorry ,I wish I did not have to.
As for 45 Rpm . I have zero trust in what any of those You Tube critic’s have to say. Most of them are back pedaling their statement’s . Some are just a salesman on there.
They have alot of skin in this like it or not.

garrard701's picture

This is excellent news! The Tone Poet series has consistently put out first-rate releases: the packaging, curation, sound, and pressing are outstanding, and at a very fair price. I ordered both immediately. I have not been this excited about a new reissue since… well, I guess the Beastie Boys “Check Your Head” which was written up here the other day. Reading AnalogPlanet is getting expensive.
I, too, am interested to know how much digital is in the chain here — but purely out of curiosity. The releases sound incredible. (My favorites would be Andrew Hill’s “Passing Ships,” Chick Corea’s “Now He Sings…,” and Herbie Hancock’s “My Point of View”). I’ll savor this Coltrane, but my vote for next title is anything from Grant Green’s sadly overlooked fusion years.

rich d's picture

I, too, would love to see quality reissues of the later Grant Green LPs. Even the couple that weren’t on Blue Note. Sadly, it doesn’t look like it’s gonna happen as the powers that be just want to reissue the same albums over and over again.

On the other hand, I’ll buy this umpteenth version on Blue Train ’cause I love it. Note to the head Analog Planeteer: it was not his first great solo album.

Mike Mettler's picture

Which album do you consider to be Trane’s “first great solo album”? I’m always open to hearing about everyone’s favorites…

… and, which Grant Green album(s) from “the fusion years” are top-shelf? I don’t have enough Green LPs in my collection, tbh, so tell me what I should get, thanks!!

rich d's picture

I think Lush Life is superb, and while it was released after Blue Train it was (all but one track I believe) recorded beforehand.

As for Grant Green, while it’s hard to beat Solid and Idle Moments, his last half dozen records are all very good, with “Green is Beautiful” and “Live at the Lighthouse” being the standouts to these ears.

And while we’re on the subject of great jazz records, everyone please walk away from your computer and scour up a copy of Lee Morgan’s ‘Tom Cat’. Finger-snappin’, foot-tappin’ goodness all the way through, with Art Blakey rim-shotting (please pardon overuse of hyphens) the rest of the band into focus every few bars. Damn!

Mike Mettler's picture

All good, thoughtful recommendations are always welcome here, imo. Good point re Lush Life, which is indeed great, but I’m going to stick with my chronological release date thought pattern regarding Blue Train.

Looks like I’ve got some further Grant Green LP research to do in the meantime, so thanks for those suggestions… and ditto re the Lee Morgan as well!!

garrard701's picture

MM: I can’t argue with Rich D’s recommendations. If you just want them all from that era, there’s just Carryin’ On; Green Is Beautiful; Alive! (all 1970); Visions; Shades of Green (both 1971); The Final Comedown; Live at The Lighthouse (both 1972). Maybe a TP box, such as the Ornette Coleman release? Alive! was at least reissued in the nice Blue Note 80 series.
There’s also a well-pressed compilation of this era — Blue Breakbeats — from 1998, which is shockingly cheap on vinyl.
There’s also the double “Live At Club Mozambique” which was finally released in 2006… but never on vinyl!
BTW in between his two Blue Note stints, when he was mostly inactive, Green recorded Iron City in 1966 (released 1972 on Cobblestone).

Mike Mettler's picture

Wow, this is fantastic! I’m updating my shopping list/file accordingly. (I also readily admit to carrying a scribbled wishlist in my pocket whenever I hit the record shops in person, even though I have the full list on my phone.) Not exactly sure where to start in this case because I feel like I need to hold these options in my hands to decide, rather than click/order, know what I mean?

Pretzel Logic's picture

Live at the Lighthouse is one of those (double) lps that always gets an enthusiastic response when i play it for friends. Rippin!

arcman67's picture

Blue Train is my favorite Jazz album. I already have quite a few versions.

azmoon's picture

As stated clearly by Kevin Gray in the 45rpm interview.

mb's picture

Something isn’t right there.

Mike Mettler's picture

…you may be right — gonna see about getting a ruling from the label on that, as they may have an incorrect side break listed there… stay tuned!!!

Mike Mettler's picture

Blue Note has indeed just confirmed with me the revised side-break info for Side C and Side D, which is now properly reflected in the story text. Thanks for the eagle eye and ear there, mb!!!

captwillard's picture

The Music Matters Version was cut from the Original Analog tape. I wonder how this will compare.

Is there and digital parts to these lp’s . Cause now we have to ask after No MoreFi .
Sorry
There is a 45 rpm Audiophile video interview on YouTube with Joe Harly and Kevin Gray that covers this question.
Was deep in the Montana forests and hills vacationing when the email announcement came through. Stopped the hike and ordered both. Stoked, can’t wait for them to arrive.
“mastered by Kevin Gray from the original analog master tapes” but as we know that doesn’t mean there were no digital steps involved. I’m buying the 2 LP version anyway.
I had to ask this question given the current climate. Sorry ,I wish I did not have to.
As for 45 Rpm . I have zero trust in what any of those You Tube critic’s have to say. Most of them are back pedaling their statement’s . Some are just a salesman on there.
They have alot of skin in this like it or not.
This is excellent news! The Tone Poet series has consistently put out first-rate releases: the packaging, curation, sound, and pressing are outstanding, and at a very fair price. I ordered both immediately. I have not been this excited about a new reissue since… well, I guess the Beastie Boys “Check Your Head” which was written up here the other day. Reading AnalogPlanet is getting expensive.
I, too, am interested to know how much digital is in the chain here — but purely out of curiosity. The releases sound incredible. (My favorites would be Andrew Hill’s “Passing Ships,” Chick Corea’s “Now He Sings…,” and Herbie Hancock’s “My Point of View”). I’ll savor this Coltrane, but my vote for next title is anything from Grant Green’s sadly overlooked fusion years.
I, too, would love to see quality reissues of the later Grant Green LPs. Even the couple that weren’t on Blue Note. Sadly, it doesn’t look like it’s gonna happen as the powers that be just want to reissue the same albums over and over again.
On the other hand, I’ll buy this umpteenth version on Blue Train ’cause I love it. Note to the head Analog Planeteer: it was not his first great solo album.
… and, which Grant Green album(s) from “the fusion years” are top-shelf? I don’t have enough Green LPs in my collection, tbh, so tell me what I should get, thanks!!
I think Lush Life is superb, and while it was released after Blue Train it was (all but one track I believe) recorded beforehand.
As for Grant Green, while it’s hard to beat Solid and Idle Moments, his last half dozen records are all very good, with “Green is Beautiful” and “Live at the Lighthouse” being the standouts to these ears.
And while we’re on the subject of great jazz records, everyone please walk away from your computer and scour up a copy of Lee Morgan’s ‘Tom Cat’. Finger-snappin’, foot-tappin’ goodness all the way through, with Art Blakey rim-shotting (please pardon overuse of hyphens) the rest of the band into focus every few bars. Damn!
Looks like I’ve got some further Grant Green LP research to do in the meantime, so thanks for those suggestions… and ditto re the Lee Morgan as well!!
MM: I can’t argue with Rich D’s recommendations. If you just want them all from that era, there’s just Carryin’ On; Green Is Beautiful; Alive! (all 1970); Visions; Shades of Green (both 1971); The Final Comedown; Live at The Lighthouse (both 1972). Maybe a TP box, such as the Ornette Coleman release? Alive! was at least reissued in the nice Blue Note 80 series.
There’s also a well-pressed compilation of this era — Blue Breakbeats — from 1998, which is shockingly cheap on vinyl.
There’s also the double “Live At Club Mozambique” which was finally released in 2006… but never on vinyl!
BTW in between his two Blue Note stints, when he was mostly inactive, Green recorded Iron City in 1966 (released 1972 on Cobblestone).
Live at the Lighthouse is one of those (double) lps that always gets an enthusiastic response when i play it for friends. Rippin!
Blue Train is my favorite Jazz album. I already have quite a few versions.
As stated clearly by Kevin Gray in the 45rpm interview.
Something isn’t right there.
The Music Matters Version was cut from the Original Analog tape. I wonder how this will compare.

source

APAC Data Center Colocation Market to Reach Over $18 Billion By 2027. Vantage Data Centers Leading the New Entrants List – Arizton – GlobeNewswire

| Source: Arizton Advisory and Intelligence Arizton Advisory and Intelligence
Bangalore, INDIA
Chicago, Aug. 01, 2022 (GLOBE NEWSWIRE) — According to Arizton’s latest research report, APAC data center colocation market is expected to grow at a CAGR of over 7% during 2022-2027 reaching investment of more than USD 18 billion. The data center market in APAC is mainly dominated by colocation providers, followed by internet and cloud service providers. There are also many cloud-based service providers that are dependent on the construction of facilities by colocation providers to collocate space on a wholesale basis.

APAC Data Center Colocation Market Report Scope
Click Here to Download the Free Sample Report
Millions of dollars are being invested by new players in the building of core and shell properties throughout APAC. Within two years of the initial build-out, the full commissioning of these new facilities is anticipated. Large data center investments in APAC nations will significantly boost the local economy through taxation. To lower their CAPEX and OPEX, data center operators, however, favor to construct facilities in areas with tax incentives. Therefore, to encourage the building of data centers throughout the predicted period, it is crucial for the government to offer tax breaks and incentives. The construction of data centers continues to grow at a substantial pace as leading data center services providers invest more than $1 billion in new development and expansions. The rise in demand across several industries has led data center suppliers to sign several M&A contracts to expand their portfolios. The data center market is also interested in the acquisition of data centers by real estate and investment firms.
Key Insights
Market Segmentation
Colocation Service
Infrastructure
Electrical Infrastructure
Mechanical Infrastructure
Cooling Systems
Cooling Technique
General Construction
Tier Standard
Region
Key Support Infrastructure Providers
Other Prominent Support Infrastructure Providers
Key Construction Contractors
Other Prominent Construction Contractors
Key Data Center Investors
Other Prominent Data Center Colocation Service Providers
New Entrants
Explore  data center knowledge base profile to know more about the industry.  
Click Here to Download the Free Sample Report
Read some of the top-selling reports: 
About Arizton:   
Arizton Advisory and Intelligence is an innovation and quality-driven firm, which offers cutting-edge research solutions to clients across the world. We excel in providing comprehensive market intelligence reports and advisory and consulting services.  
We offer comprehensive market research reports on industries such as consumer goods & retail technology, automotive and mobility, smart tech, healthcare, and life sciences, industrial machinery, chemicals, and materials, IT and media, logistics and packaging. These reports contain detailed industry analysis, market size, share, growth drivers, and trend forecasts.  
Arizton comprises a team of exuberant and well-experienced analysts who have mastered in generating incisive reports. Our specialist analysts possess exemplary skills in market research. We train our team in advanced research practices, techniques, and ethics to outperform in fabricating impregnable research reports.  
Click Here to Contact Us  
Call: +1-312-235-2040  
          +1 302 469 0707 

source

Development of smart cold forging die life cycle management system based on real-time forging load monitoring | Scientific Reports – Nature.com

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 13297 (2022)
Metrics details
Cold forging dies are manufactured through the shrink fit process to withstand high pressure loads, but fatigue failure eventually occurs due to repeated compressive stresses. The life cycle until fatigue failure was defined as the limit life, and attempts were made to predict the die life based on finite element method. However, accurate prediction was impossible owing to uncontrollable environmental variables. Consequently, it is impossible to clearly determine the die replacement cycle, resulting in negative consequences such as poor quality, production delay, and cost increase. Various environmental factors affecting the prediction of die life cycle result in the increase or decrease of the forming load, which is an important variable that determines the die life cycle. In this study, a system for monitoring load data generated from forging facilities was developed based on a piezo sensor. In addition, the die life cycle was more accurately predicted by using the forming load data measured in real time, and a die life management system that can determine the die replacement cycle was applied to the automobile steering parts production line.
The manufacturing industry in modern society is facing various problems due to excessive increase in manufacturing costs, including material and labor costs, rapid demand fluctuations, excessive equipment investment, and surplus production resources1. In particular, as the carbon emission regulations are strengthened2, the required specifications of the final product are changing in various ways, along with the improvement and innovation of the manufacturing process3. To improve the fuel efficiency of automobiles, it is required to reduce the weight of all parts4; simultaneously, non-environmental factors must be excluded from the manufacturing process. Consequently, the manufacturing industry was faced with the challenge of simultaneously achieving eco-friendliness, high quality, and low cost. To overcome this situation, efforts are being made to improve the efficiency of the manufacturing process by making various attempts, such as the establishment of a low-cost production structure and the expansion of the automated process. This flow has led to the wave of the fourth industrial revolution that started in Germany5 and is accelerating a paradigm shift in the manufacturing industry. Innovation in the manufacturing sector refers to hyper-connection centered on process data and includes analysis and utilization of big data, Internet of Things (IoT), addictive manufacturing, simulation, and horizontal and vertical integration systems6.
In this study, as part of the paradigm shift for manufacturing innovation, data from the manufacturing process of automobile steering parts were collected. Based on this, the life span of the forging die was predicted more accurately. Furthermore, it was attempted to maximize the efficiency in the manufacturing process by monitoring the die replacement cycle by the operator. The ball stud in Fig. 1 is connected to the outer ball joint (OBJ), one of the steering systems of automobiles, and plays a role in securing mobility in various directions.
Ball stud parts of a steering system7,8,9,10.
Ball studs are manufactured through a multi-stage cold forging process, in which bulk materials are pressed several times in a closed space to form a final product. Forging operations consist of forming the component by means of plastic deformation of raw material, compressed between a punch and die11. In particular, the cold forging process can secure high strength and high shape precision by deforming the material at room temperature12. In this process, the die is repeatedly subjected to a high compressive load, and the die material reaches the fatigue limit and becomes damaged13. This leads to an increase in process costs14, e.g., decrease in productivity and increase in the defect rate due to die fracture and replacement. Studies have been conducted to predict the lifespan of cold forging dies and reduce process costs. The most common way to predict the life of a cold forging die is to use FEM. However, these methods do not quantitatively predict the limiting life, but remain in a qualitative analysis13,15. On the other hand, there are studies conducted from the viewpoint that the breakage of the forging die is caused by fatigue cracking14,16,17. Tanrıkulu calculated the fatigue limit of the material of the cold forging die and presented an empirical formula to predict the limit life of the die based on the stress value acting on the die through numerical simulation18. In addition, similar studies for predicting the life of cold forging dies are continuing19,20,21,22,23.
However, in the manufacturing site, the lifespan of the die is still managed based on the experience of the operator, and the breakage of the die occurs suddenly because various working environment variables cannot be considered. There are two main reasons why various research results cannot be applied to the field. The first is that the stress prediction of the die based on simulations does not match the fatigue failure of the die that occurs in the field. Predictions based on finite element method (FEM) is an ideal result that does not take into account various variables such as die alignment, material size deviation, and working temperature. There is a sense of disparity between the results of FEM and the field. It is almost impossible to control all the variables of the manufacturing site. However, all factors result in forging forming load values. Theoretically, the method of calculating the forging load has already been studied24,25. However, in this study, forging equipment load data were used for a more practical study. By increasing the FEM result accuracy, it is possible to improve the die limit life prediction accuracy using this.
Second, as the simulation result of the forging process is essential in predicting the die life, the intervention of an expert is inevitable, and it is impossible to quickly respond to the process change. Therefore, research to improve the accuracy of the existing die life prediction method and system development research should be conducted to enable field use by non-experts.
A method to increase the prediction accuracy of die life through big data analysis by converting the variables of the working environment into data can be a solution, but the research efficiency is lowered owing to the large amount of data. There is a linking factor between the working environment variables in the cold forging process and the stress of the die, called the forming load. Therefore, in this study, the forming load data were measured in real time at the facility, and the stress acting on the die was predicted using real-time data. Consequently, it was possible to calculate the limiting life of the die with high accuracy. In addition, the data collection, processing, analysis, and monitoring procedures were integrated and systemized so that on-site workers could easily monitor the mold replacement cycle.
The material of the ball stud parts was 34CrMo4 (Table 1) with a diameter of 22 mm, and spheroidizing heat treatment was applied to enhance hardenability. To obtain simulation properties, tensile and compression specimens were processed, as shown in Fig. 2, in accordance with ASTM E8 (sub size) standard26. A tensile test was performed at a speed of 10 mm/min, and a compression test was performed at a speed of 2 mm/min up to a compression rate of 80%. As a result of the tensile test, the mechanical properties were obtained, as shown in Table 2. The engineering stress and strain obtained from the tensile and compression tests were converted to true stress and strain by the following equations.
Tensile and compression test specimens with detailed dimension.
The tensile and compression true stress–true strain curves of the 34CrMo4 material were derived, as shown in Fig. 3. 34CrMo4 is an exclusive material for cold heading, and as a result of the tensile test, the uniform elongation section is very small, so it cannot sufficiently simulate work hardening in compression deformation.
True stress–strain curve of 34CrMo4.
On the other hand, in the compression test, the true stress–strain curve of a fairly wide section can be obtained because the material does not break to a compression ratio of 80%. Therefore, a compression curve was used for the simulation properties of the mulit-stage cold forging process.
The die used in the cold forging process of the ball stud parts is generally composed of a core, reinforcing ring, and case, and the materials used are different. WC–Co alloy is used for the core, where breakage of die occurs owing to the concentration of stress in the forging process. WC exhibits high hardness and abrasion resistance, and Co is related to toughness27. In general, the mechanical properties of the WC–Co alloy are determined by the Co content, and it is manufactured via a sintering process of press-molding while being heated to an appropriate temperature. The material of the core die used in the manufacturing process of the ball stud parts was a WC–Co alloy with a Co content of 20%, and its mechanical properties are shown in Table 3. WC–Co alloy has high compressive strength but is vulnerable to tensile strength, so the concentration of tensile stress is suppressed by the reinforcing ring. However, when the cyclic tensile stress applied to the die material by high-speed cyclic loading exceeds a certain strength, fatigue failure occurs. Therefore, to define the limiting life of the cold forging die, it is necessary to acquire the fatigue properties of the mold material. Fatigue test specimens were manufactured through sintering, grinding, and polishing processes, as shown in Fig. 4, in accordance with the ASTM E 466 standard28.
Fatigue experimental specimen with detailed dimension.
A radius of curvature of 3 mm was reflected to prevent stress concentration in the part in contact with the jig of the testing machine. Further, the radius of curvature of the area corresponding to the gage length was 12.7 mm, which was designed so that stress concentration could occur effectively. Using Instron 8801 equipment, the S–N diagram of the die material was derived, as shown in Fig. 5, for a stress ratio of 0.1 and a frequency of 10 Hz. Starting with the load condition corresponding to low life, the life curve progressed to the level at which the fatigue limit was secured until the flattened section.
S–N curve of WC–Co material.
The manufacturing process of the ball stud parts comprised a total of six stages with forming apparatus, as shown in Fig. 6. Different molds for each of the 6 processes are placed in one die block. After one stroke, the material automatically transfer to the next process. Accurate prediction of the tensile stress in the weak point of the core die at which tensile stress is repeatedly applied should be preceded. For this, a finite element simulation was performed on the multi-stage cold forging process using FORGE, a finite element analysis program. As shown in Fig. 7, all die structures at each stage were modeled, and a fully coupled method was applied to improve the accuracy of die stress prediction. Figure 8 shows the detailed die modeling for ball stud forming procedure. WC–Co, SKD-61, and SKD-51/SKD-11 were used for the core die (WC), reinforcement ring (H13), and case (D2/M2) material of each stage, respectively. The physical property values ​​provided by the analysis program were used as shown in Table 4. For the analysis properties of 34CrMo4, the compression diagram shown in Fig. 3 was used. The amount of shrink fit of the reinforcing ring was applied differently at each stage within the range of 0.1–0.14%. In addition, a friction coefficient of 0.08 between the material and core die was applied, and a coefficient of friction of 0.12 was applied to the rest of the contact regions. The movement speed of the punch was the same at 150 mm/s for all stages. The maximum principal stress acting on the die due to the pressurization of the material was confirmed through the fully coupled analysis. Figure 9 shows the point where the maximum principal stress in each stage acts. This analysis process is then used to derive the history of the maximum principal stress value according to the forming load in each process. The maximum principal stress value shows a constant trend according to the change of the forming load. The time it takes to confirm the results of a single analysis case is 24 h. Since it is not possible to follow the production cycle at the manufacturing site, it is simplified to the model for calculating the maximum principal stress based on the trend.
Multi-stage cold forging process design with forming apparatus.
FE modeling of ball stud forming procedure.
Detailed die modeling for ball stud forming procedure.
Max. principal stress acting on the core die of all stage.
The maximum principal stress acting on the core die mainly occurs at the edge of the die, and this value cannot be directly substituted on the y-axis in Fig. 5. This is because the result value of the finite element analysis corresponds to a stress concentration dependent on the element and shape functions. Both the finite element analysis result and stress corresponding to the y-axis in Fig. 5 should be converted into nominal stress values. The stress concentration factor (kt) value cab be calculated based on the shape factor (corner curvature radius and depth) of the corner where breakage is expected to occur29. The stress concentration coefficient is a numerical value indicating the degree of stress concentration distributed in notches, holes, and grooves. By applying the stress concentration factor to the finite element analysis result value, it is possible to convert the maximum principal stress to nominal stress.
Similarly, the fatigue stress concentration factor (kf) is applied to the y-axis stress value in Fig. 5 to convert it into nominal stress. As shown in Fig. 4, since there is a notch in the center of the specimen, the stress values are not nominal stresses. The fatigue stress concentration factor is a numerical value indicating the degree of stress concentration due to the notch in the fatigue load state.
A fatigue test specimen without a notch was additionally prepared. Under the same fatigue test conditions, kf is calculated as the ratio of fatigue strength without notch and fatigue strength with notch.
Then, by dividing the stress amplitude in Fig. 5 by kf, it is converted to the nominal fatigue stress.
It is converted into nominal stress (σanalysis) by substituting the maximum principal stress, which is the analysis result, into Eq. (3). Substituting this into the nominal fatigue stress (σfatigue) of Eq. (5), it becomes the fatigue strength that can be substituted into the S–N curve.
Quantitative evaluation of the die life was performed by predicting the life corresponding to the fatigue stress. The equation was derived by fitting the S–N diagram in Origin, a commercial S/W. By substituting the value of Eq. (6) into the fitted equation, it is possible to derive the cycle corresponding to the lifespan. The results are shown together with the actual die stress in Table 5. Comparison of the predicted data with the actual die life in the field reveals an error range of ± 20%, which is attributed to the fact that working environment variables are not taken into account in the die life prediction process. In the actual working environment, the forming load changes flexibly owing to die alignment, dispersion of material properties, and changes in friction conditions, which means that the maximum principal stress acting on the die changes according to the working environment. However, in the process of quantitatively predicting the die life, the maximum principal stress acting on the die is assumed to be an ideally fixed value, so this error is indicated. Another problem is that it inhibits applications to the field because it is difficult for non-experts to use it as the simulation of the forming process must be performed to predict the die life.
Owing to the environmental variables of the ball stud cold forging process, load variation caused by the pressurization of the upper and lower dies occurs. Accordingly, the maximum principal stress acting on the die also shows deviation. By measuring the forming load in real time, the die life prediction error can be suppressed. A piezo sensor was used to measure the pressing force of the cold forging upper and lower dies in real time. The most accurate way to measure the forming load is to install a load cell between dies. However, the load cell cannot withstand the forming load and affects the dimensional accuracy of the part. In addition, as it must be installed in an enclosed space, realizing a wired connection for signal processing is impossible. Therefore, as shown in Fig. 10, a piezo sensor was installed in the punch block of the forging former. More precisely, the piezo sensor was installed in the narrow space between the wedge and the backplate where the applied force was transmitted and can be measured. The piezoelectric sensor generates an electrical signal (G: gauge factor) by the piezoelectric effect30, which is defined as the relationship between the strain (ε) generated by the applied stress and the resistance rate of change (ΔR/R).
Piezo sensor installation location.
As shown in Eq. (7), the electrical signal generated from the piezo sensor is defined as the rate of change. The electrical signal was integrated to convert it into an actual load graph, and the result is shown in Fig. 11. Finally, the electrical signal on the y-axis in Fig. 11 must be converted into a unit of load. To this end, a fixing jig was made to mount the calibration load cell on the forging former, and the actual load was measured. Real-time load data measurement was possible through repeated comparison of the maximum load value and maximum electrical signal value. In this process, the dedicated calibration S/W provided by the load cell vendor was used, and periodic load diagram calibration was performed on site. A system that could monitor the forming load in real time was built at the ball stud production site, and it was implemented in the form of a program, as shown in Fig. 12.
Conversion of sensor signal into load graph form.
Load diagram conversion process and monitoring system.
In order for the quantitative die life prediction technology to be universally applied to the field, the maximum principal stress must also be calculated in real time based on real-time forming load data. In particular, it is impossible to perform process simulation in real time because the simulation must be carried out at high speed in consideration of the short production cycle (1ea/s) of the ball stud parts. A simple mathematical model for predicting the maximum principal stress acting on a cold forging die is a realistic alternative. Figure 13 shows the stress history at the point where the maximum principal stress occurs in the lower core die of stage 1. The maximum principal stress maintains a constant value of 0 within the range of the constant forming load (Ft: threshold load) and increases linearly and proportionally over the range of the load. This trend was also observed in the upper and lower core dies of stages 1–6. Therefore, a mathematical model capable of predicting the maximum principal stress, as shown in Eq. (8), was presented, and the Cth and Cslope constants were derived by considering the maximum principal stress history of the upper and lower dies in stages 1–6.
Predictive model based on maximum principle stress history.
Freal is shown in Fig. 14 and denotes the maximum forming load value from stage 1 to stage 6 measured in real time. Its conversion into the maximum principal stress history using Eq. (8) is shown in Fig. 15. Such complex variable load histories can be replaced with simplified equivalent load histories; however, in this study, actual data were used for the real-time implementation and simplification of field application algorithms.
Real time maximum forming load history.
Real time maximum principal stress history.
Miner’s linear cumulative damage hypothesis was derived under the assumption that the fracture of the structure due to fatigue occurs when the work caused by countless fatigue loads reaches the critical value of the material31. Using the maximum principle stress data and the S–N diagram of the material, it is possible to calculate the cumulative damage factor (CDF), as in Eq. (9)@32.
Here, ni is the number of cycles according to each stress level, Ni is the allowable number of cycles according to the stress criterion obtained from the fatigue curve, and DFi is defined by the relationship of ni/Ni. As shown in Fig. 16, the cycle in which the value of CDF reaches 1 by cumulative calculation of DF, was defined as the limiting life of the forging die. Table 6 shows the life limit for each process. It can be seen that the error range was reduced to ± 7% compared to the die life prediction results in Table 5, assuming the maximum principal stress value to be a single constant.
Die life cycle prediction based on cumulative damage factor.
The system is configured as shown in Fig. 17 so that the operator can monitor the remaining life cycle of the die currently in use. The forging machine has an embedded piezo sensor, and a module to store the signal generated by the sensor is installed. In addition, a data processing server for calculating the sensor signal as the remaining life cycle of the die is configured. The remaining life cycle of the die can be calculated as in Eq. (10).
Die life managing system.
In this study, a method to more efficiently manage the die life in the multi-stage cold forging process was presented. Based on pressurized load data collected in real time, a more accurate prediction of die life was possible. Furthermore, to increase the utilization in the field, the intervention of experts was completely excluded, and application to the automobile parts manufacturing site was realized. The detailed study contents are summarized as follows.
The S–N diagram of the die material was obtained to predict the lifespan of the cold forging die. The maximum principal stress value was predicted through the coupling of the forging process simulation and die analysis. It was possible to predict the die life by substituting the maximum principal stress value into the S–N diagram, but the accuracy was low with an error rate range of ± 20%. In addition, there was a limit to field application owing to the high professional difficulty of the die life prediction process.
To solve this problem, an infrastructure for real-time monitoring of the forming loads from stages 1–6 of cold forging process was established. In addition, a data sensing–collection–analysis–processing linkage system was installed at the manufacturing site so that the forming load data could be used to predict the life of the die. To exclude expert intervention in this process, a mathematical model capable of predicting the maximum principal stress based on the forming load data was presented.
As a result of predicting the die life more accurately based on the linear cumulative damage hypothesis, the error range was reduced from a maximum of ± 20% to ± 7%.
With the establishment of a system capable of monitoring the remaining life of the die, the operator in the field can intuitively determine the time to change the die, and it is possible to improve the efficiency of the manufacturing process.
Guo, D. et al. Synchroperation in industry 4.0 manufacturing. Int. J. Prod. Econ. 238, 1–13. https://doi.org/10.1016/j.ijpe.2021.108171 (2021).
Article  Google Scholar 
Wei, R. & Liu, C. Research on carbon emission reduction in road freight transportationsector based on regulation-compliant route optimization model andcase study. Sustain. Comput. Inform. 28, 1–9. https://doi.org/10.1016/j.suscom.2020.100408 (2020).
Article  Google Scholar 
Mears, L. & Summers, J. Manufacturing for design: A sustaining approach to drive manufacturing process evolution, then innovation. Procedia Manuf. 42, 1136–1142. https://doi.org/10.1016/j.promfg.2020.05.155 (2020).
Article  Google Scholar 
Peppas, A., Kollias, K., Dragatogiannis, D. A. & Charitidis, C. A. Sustainability analysis of aluminium hot forming and quenching technology for lightweight vehicles manufacturing. Int. J. Thermofluids 10, 1–11. https://doi.org/10.1016/j.ijft.2021.100082 (2021).
Article  Google Scholar 
Afolalu, S. A. et al. Enviable roles of manufacturing processes in sustainable fourth industrial revolution—A case study of mechatronics. Mater. Today Proc. 44, 2895–2091. https://doi.org/10.1016/j.matpr.2021.01.099 (2021).
Article  Google Scholar 
Majeed, A. et al. A big data-driven framework for sustainable and smart additive manufacturing. Robot. Comput. Integr. Manuf. 67, 1–21. https://doi.org/10.1016/j.rcim.2020.102026 (2021).
Article  Google Scholar 
How Quality Wire Rods Benefit Automakers. http://product.posco.com/homepage/product/eng/jsp/news/s91w4000120v.jsp?SEQ=154 (2017).
Dorman Tie Rod End–Outer. https://www.pinterest.co.kr/pin/782711610240177784 (2018).
What is a Ball Joint. https://help.summitracing.com/app/answers/detail/a_id/5252/~/what-is-a-ball-joint%3F (2020).
Customized Ball Stud of Tie Rod Een, Rack End, Ball Joint, Stabilizer Link. https://www.greatap.com.tw/en/product/Customized-Ball-Stud-of-Tie-Rod-End-Rack-End-Ball-Joint-Stabilizer-Link/A0101.html (2019).
Black, J. T. & Kohser, R. A. DeGarmo’s Materials and Processes in Manufacturing (Wiley, 2012).
Google Scholar 
Wang, Z. G. et al. A testing method of cold forging performance of steel wire. CIRP Ann. 69, 281–284. https://doi.org/10.1016/j.cirp.2020.04.041 (2020).
Article  Google Scholar 
Dalbosco, M., da Silva Lopes, G., Schmitt, P. D., Pinotti, L. & Boing, D. Improving fatigue life of cold forging dies by finite element analysis: A case study. J. Manuf. Process. 64, 349–355. https://doi.org/10.1016/j.jmapro.2021.01.039 (2021).
Article  Google Scholar 
Hawryluk, M. Review of selected methods of increasing the life of forging tools in hot die forging processes. Arch. Civ. Mech. Eng. 16, 845–866. https://doi.org/10.1016/j.acme.2016.06.001 (2016).
Article  Google Scholar 
Panuwat, S., Surawut, Y. & Kumpanat, S. Finite element modeling of shrink-fit design for improvement of die-service life in hot forging process of a bevel gear. Mater. Today Proc. 17, 1711–1719. https://doi.org/10.1016/j.matpr.2019.06.202 (2019).
Article  Google Scholar 
Hayakawa, K., Nakamura, T. & Tanaka, S. Analysis of fatigue crack initiation and propagation in cold forging tools by local approach of fracture. Mater. Trans. 45, 461–468. https://doi.org/10.2320/matertrans.45.461 (2004).
CAS  Article  Google Scholar 
Vazquez, V., Hannan, D. & Altan, T. Tool life in cold forging—an example of design improvement to increase service life. J. Mater. Proc. Technol. 98, 90–96. https://doi.org/10.1016/S0924-0136(99)00309-X (2000).
Article  Google Scholar 
Tanrıkulu, B. & Karakuzu, R. Fatigue life prediction model of WC-Co cold forging dies based on experimental and numerical studies. Eng. Fail. Anal. 118, 1–11. https://doi.org/10.1016/j.engfailanal.2020.104910 (2020).
CAS  Article  Google Scholar 
Geiger, M. & Falk, B. Prediction of service life and failure probability of cold forging tools. CIRP Ann. Manuf. Technol. 50, 173–176. https://doi.org/10.1016/S0007-8506(07)62098-8 (2001).
Article  Google Scholar 
Saroosh, M. A. et al. High cycle fatigue life prediction of cold forging tools based on workpiece material property. J. Mater. Process. Technol. 191, 178–181. https://doi.org/10.1016/j.jmatprotec.2007.03.015 (2007).
CAS  Article  Google Scholar 
Falk, B., Engel, U. & Geiger, M. Estimation of tool life in bulk metal forming based on different failure concepts. J. Mater. Process. Technol. 80, 602–607. https://doi.org/10.1016/S0924-0136(98)00168-X (1998).
Article  Google Scholar 
Fu, M. W., Yong, M. S. & Muramatsu, T. Die fatigue life design and assessment via CAE simulation. Int. J. Adv. Manuf. Technol. 35, 843–851. https://doi.org/10.1007/s00170-006-0762-5 (2008).
Article  Google Scholar 
Lee, Y.-C. & Chen, F.-K. Fatigue life of cold-forging dies with various values of hardness. J. Mater. Process. Technol. 113, 539–543. https://doi.org/10.1016/S0924-0136(01)00720-8 (2001).
CAS  Article  Google Scholar 
Allieva, L. et al. Effect of the tool geometry on the force mode of the combined radial-direct extrusion with compression. East. Eur. J. Enterp. Technol. 2(1–104), 15–22. https://doi.org/10.15587/1729-4061.2020.198433 (2020).
Article  Google Scholar 
Hrudkina, N. et al. Modeling the process of radial direct extrusion with expansion using a triangular kinematic module. East. Eur. J. Enterp. Technol. 3(1–105), 17–22. https://doi.org/10.15587/1729-4061.2020.203989 (2020).
Article  Google Scholar 
ASTM Standard E8. Standard test methods for tension testing of metallic materials. ASTM Int. (2013).
Sandvik Hard Materials. Understanding Cemented Carbide. http://www.wococarbide.com/Uploads/2016-12-05/5844f9738447e.pdf (2014).
ASTM Standard E 466. Standard practice for conducting force controlled constant amplitude axial fatigue tests of metallic materials. ASTM Int. (2021).
Yao, W., Kaiquan, X. & Yi, G. On the fatigue notch factor. Kf. Int. J. Fatigue 17, 245–251. https://doi.org/10.1016/0142-1123(95)93538-D (1995).
CAS  Article  Google Scholar 
Jiao, P., Egbe, K.-J.I., Xie, Y., Nazar, A. M. & Alavi, A. H. Piezoelectric sensing techniques in structural health monitoring: A state-of-the-art review. Sensors 20, 1–20. https://doi.org/10.3390/s20133730 (2020).
CAS  Article  Google Scholar 
Baek, S. H., Cho, S. S. & Joo, W. S. Fatigue life prediction based on the rainflow cycle counting method for the end beam of a freight car bogie. Int. J. Autom. Technol. 9, 95–101. https://doi.org/10.1007/s12239-008-0012-y (2008).
Article  Google Scholar 
Chang, Y. S. et al. Establishment of fatigue life evaluation and management system for district heating pipe considering operating temperature transition data. J. Mech. Sci. Technol. 29, 1235–1242. https://doi.org/10.3795/KSME-A.2005.29.9.1235 (2005).
Article  Google Scholar 
Download references
This study has been conducted with the support of the Korea Institute of Industrial Technology as “Development of intelligent root technology with add-on modules (KITECH EO-22-0005)”.
Automotive Materials and Components R&D Group, KITECH, Cheomdan-venturero 108, Gwangju, 61007, Korea
Young Ho Seo
You can also search for this author in PubMed Google Scholar
Y.H.S.: Conceptualization, methodology, software, validation, formal analysis, investigation, resources, data curation, writing—original draft, writing—review and editing, visualization, supervision.
Correspondence to Young Ho Seo.
The author declares no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Seo, Y.H. Development of smart cold forging die life cycle management system based on real-time forging load monitoring. Sci Rep 12, 13297 (2022). https://doi.org/10.1038/s41598-022-17564-7
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-17564-7
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Advanced search
Scientific Reports (Sci Rep) ISSN 2045-2322 (online)
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

source

Avid Technology (AVID) Q2 2022 Earnings Call Transcript – The Motley Fool

Founded in 1993 by brothers Tom and David Gardner, The Motley Fool helps millions of people attain financial freedom through our website, podcasts, books, newspaper column, radio show, and premium investing services.
Founded in 1993 by brothers Tom and David Gardner, The Motley Fool helps millions of people attain financial freedom through our website, podcasts, books, newspaper column, radio show, and premium investing services.
You’re reading a free article with opinions that may differ from The Motley Fool’s Premium Investing Services. Become a Motley Fool member today to get instant access to our top analyst recommendations, in-depth research, investing resources, and more. Learn More
Image source: The Motley Fool.
Avid Technology (AVID -1.35%)
Q2 2022 Earnings Call
Aug 02, 2022, 5:30 p.m. ET
Whit Rappole
Good afternoon, ladies and gentlemen and welcome to Avid Technology’s second quarter 2022 earnings conference call for the period ended June 30, 2022. My name is Whit Rappole, Avid’s vice president, corporate development and investor relations. Please note that this call is being recorded today August 2, 2022, at 5:30 p.m. Eastern Time.
With me this afternoon are Jeff Rosica, our chief executive officer and president; and Ken Gayron, our chief financial officer and EVP. In their prepared remarks, Jeff will provide an overview of our business, and then Ken will provide a detailed review of our financial and operating results followed by time for questions. We issued our earnings release earlier this afternoon and we have prepared a slide presentation that we will refer to on this call. The press release and presentation are currently available on the Events and Presentations page of our Investor Relations website at ir.avid.com and shortly following the conclusion of the call, a replay will be available on our IR website for a limited time.

During today’s call, management will reference certain non-GAAP financial metrics and operational metrics. In accordance with Regulation G, both the appendix to our earnings release today and our investor website contain a reconciliation of the most closely associated GAAP financial information to the non-GAAP measures and also definitions for the operational metrics used on this call and in the presentation. Unless otherwise noted all figures, discussed by management during the call are non-GAAP figures except for revenue, which is always GAAP. In addition, certain statements made during today’s presentation contain forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995.
Our comments and answers to your questions on this call, as well as the accompanying slide deck may include statements that are forward-looking and that pertain to future results or outcomes. These forward-looking statements are based on our current beliefs and information available as of today. Actual future results or occurrences may differ materially from these forward-looking statements. For more information including a discussion of some of the key risks and uncertainties associated with these forward-looking statements, please see our press release issued today and our most recent annual report on Form 10-K and quarterly reports on Form 10-Q filed with the SEC.
With that, let me turn the call over to our CEO and president, Jeff Rosica for his remarks.
Jeff Rosica — Chief Executive Officer and President
Thanks, Whit, and my thanks to everyone who joined us today to review Avid’s second-quarter results. So, let me dive right in. Let’s start with the three main takeaways for Avid’s performance during the quarter. First, we delivered strong subscription growth, including another good quarter for enterprise adoption, where we added 3800 MediaCentral flex subscriptions in Q2.
And we continued to deliver sustained growth with another solid quarterly performance from our creative tools’ subscriptions. Next, we continue to experience strong overall market conditions and healthy customer demand for our software and integrated solutions. However, as expected, the global supply chain constraints that impacted our first quarter continued through the second quarter, and we were not able to ship a significant portion of the customer orders that we received for integrated solutions in the first half. And finally, even with these limitations, we still delivered year-over-year total revenue growth and expanding gross margin and adjusted EBITDA margin, which together drove continued year-over-year improvement in profitability.
Overall, we ended the quarter seeing continued strong market demand for our solutions, and we have a higher-than-normal level of unshipped orders for integrated solutions, which together give us confidence in our trajectory as we enter the second half. Now, let me dig in a bit more and provide some specifics on each of these areas. With sustained strong adoption of our subscriptions by both new and existing customers for both our creative tools and enterprise offerings. We saw strong growth in our overall subscription business in the second quarter.
We realized net adds of 18,500 subscriptions and delivered year-over-year growth of 22% in the number of overall subscriptions. We continue to expand our portfolio of higher-value enterprise subscription offerings, which are contributing to revenue growth. We launched NEXIS Flex with our virtual file system software as a subscription and saw initial success with dozens of customers in the second quarter. The NEXIS virtual file system is a software solution that runs on either our NEXIS storage appliances, or on our NEXIS cloud storage to deliver the same media storage performance whether using on-premises, or cloud-based storage, or both.
We also launched the F-series upgrade to our NEXIS appliances in July. And our proceed pricing continues to improve as the higher-priced enterprise subscriptions becomes a larger portion of the business. Our creative tools remained in central piece of our subscription growth and during the second quarter, which is historically our seasonally weakest quarter for this part of our business. We had good net ads across all three of the creative tool product lines.
We continue to innovate and further grow this business to attract more next-generation creatives. In late April, we introduced Pro Tools artist, a new lower-priced tier directed at the music creation community. The initial results from Pro Tools artists are encouraging and we look forward to continued growth from this new tier. Together these factors all resulted in 58.7% year-over-year subscription revenue growth.
During the second quarter, healthy demand from our customers and strong commercial activity continued across our businesses, resulting in year-over-year revenue growth in the quarter. Business activity with our enterprise customers remain strong, and we continue to see healthy uplift when we convert customers to subscription. We closed 19 new enterprises subscription agreements, including with such notable brands as ITV News and Warner Brothers Discovery. Due to the ongoing global supply chain constraints that I mentioned earlier.
And as we discussed on our previous earnings call, we realized a year-over-year 10.6% decline in integrated solutions revenue in Q2, as we continue to face challenges in delivering customer orders for certain parts of our integrated solutions portfolio. While we continued to see strong demand for our products, the expected supply chain constraints that we’re facing are impacting production levels and our ability to meet this healthy demand. As a result of the lower shipments in the first half of the year due to these constraints. unfulfilled contractually committed orders for integrated solutions were more than 20 million above typical levels of unfulfilled orders at the end of the second quarter.
We are making progress and working to resolve these issues. And based on what we’re seeing today from suppliers combined with the great work of our teams, we anticipate the impacts of the global supply challenges on our business will be gradually resolved over the next several quarters, starting during the second half of 2022. Our third takeaway is our business fundamentals and profitability remain strong. Our subscription and maintenance revenue grew 19% year over year in the quarter to 62 million, based on strong subscription growth across our businesses.
As expected and as we have previously discussed, our success in converting enterprise customers to subscription is resulting in a reduction in maintenance revenue. However, there’s a significant growth in our total subscription revenue continued to drive double-digit subscription and maintenance revenue growth and also resulted in strong 14% year-over-year growth in ARR and 46% year-over-year growth in subscription ARR. We continued our focused on proactively managing our costs, while also investing in technology innovation and digital transformation to fuel our strategic growth plan. The revenue growth combined with year-over-year improvement in gross margin and sequentially stable operating expenses enabled us to deliver adjusted EBITDA margin of 17% for the quarter.
And we delivered non-GAAP EPS growth of 4% year over year. Now, let’s talk about where we see things going forward from a business perspective. We’ve seen the healthy demand for our products and solutions continue into the third quarter. And we expect for this trend to continue based on the market signals we’re seeing.
We had several customer events recently that have reinforced this view. In July, we had an additional voice of the customer event in the U.K., with dozens of European members of the Avid Community Association. These discussions help us inform us on our customers priorities and ensure that our product roadmaps will meet our customers’ needs and investment priorities. In addition, during these recent meetings, we were happy to hear from our customers that they expect to continue to invest in the technology and solutions that they need to help deliver the increasing volume of high-quality content that consumers are expecting and to drive their own strategic priorities, including greater content supply chain efficiencies, which our solutions help clients address.
Earlier today, we announced an important agreement between Amazon Studios and Avid to help advance Amazon’s content production in the cloud and to enable their editors and other content contributors to use Media Composer, NEXIS storage, and the MediaCentral platform in a globally scalable studio in the cloud solution running on AWS. In the news release, Amazon Studios spokesperson stated that they see Avid as a central component of their studio in the Cloud Vision to provide a fully cloud-based toolset to their creative teams across the globe. We’re really excited about this new agreement with Amazon Studios, as we believe it further demonstrates our unique position and the market leadership in helping move the media entertainment industry to the cloud. We will continue to innovate with new technologies, develop new solutions, and forge partnerships that will contribute toward our growth plan.
I’m encouraged by the additional new products and key product enhancements in our development pipeline to meet the market and customer demands that we see and to help drive our growth. As always, we will continue our efforts to improve efficiency and maintain the cost discipline that we have been so focused on the past few years. While we will also continue to make strategic investments in new innovative solutions, as well as our digital transformation in support of our long-term growth plan. As I said earlier, we currently expect that the global supply chain conditions that have been impacting our integrated solutions shipments will moderate over time.
And in fact, we are expecting to significantly increase production and shipments of integrated solutions in the second half compared to the first half. However, based on the current healthy demand overall for our solutions, we don’t expect to fully catch up this year, and we expect to end the year with some elevated amount of unfulfilled orders. That said, this expectation is fully factored into our 2022 guidance. Our experienced supply chain operations and hardware design teams continue to work to mitigate the effects of the global supply chain situation on our business.
And we will continue to be diligent in managing ongoing risk present from the macro supply chain environment and to maximize our business performance in 2022. Through all of this for the full year 2022, we expect to deliver continued revenue growth and healthy profitability. We expect continued strong performance from our growing subscription business and as such, we are maintaining our full-year 2022 guidance targets for subscription and maintenance revenue. However, while on the one hand, we are also seeing healthy market conditions and strong overall demand for integrated solutions.
The impact from the global supply chain challenges on our integrated solutions business and the expected timing of the recovery from these challenges are adding variability to our full year 2022 business plans. As a result, we are prudently widening our range for our full year 2022 revenue guidance, while keeping the same midpoint to better reflect the range of possible outcomes for the year. We are adjusting our full-year guidance for adjusted EBITDA and non-GAAP EPS to reflect this wider revenue range. We’re also adjusting our free cash flow guidance for full year 2022 as a result of several factors.
First, we’re seeing more rapid adoption of enterprise subscriptions globally, which are strategically important for the company and are positive for our long-term model. But they have different near-term cash conversion characteristics than our individual creatives subscription business. Second, the expected timing of the integrated solutions manufacturing recovery happening later in the second half will likely lead to some cash collections from the shipments falling into early 2023. And third, to the extent we can, our plan is to temporarily build up our inventories to a level that will provide us sufficient buffer and greater flexibility to better navigate the variability and anticipated supply chain conditions over the next several quarters.
And most importantly, to better meet the stronger demand that we’re seeing. With that, let me now turn the call over to Ken to review more of the financial details. Take it away, Ken.
Ken Gayron — Chief Financial Officer and Executive Vice President
Thank you, Jeff, and good afternoon, everyone. In the second quarter, we continued our profitable growth driven by robust performance in our subscription business in our growing ARR. Our focus for the second half of 2022 will be to further build our high-margin subscription revenue and continue to stay on track with our long-term model. We expect these efforts to result in continued improvement in our key financial metrics.
With that, let us now turn to the details of our second-quarter financial results. We are encouraged by the continued growth of our paid subscription base. Our total subscription count reached approximately 450,000 at the end of the second quarter, an increase of 22% year over year. Growth in both enterprise subscriptions and creative tools continued to be healthy and solid.
MediaCentral subscriptions grew to approximately 23,100, an increase of about 3800 during the second quarter, representing a year-over-year growth rate of 209%. The increase in enterprise subscriptions furthers our confidence in the transition of our existing customer base to subscription. Subscriptions for our creative tools performed as expected in the traditionally seasonally weaker second quarter, increasing by approximately 14,600. Subscription growth was solid for our creative tools, with year-over-year growth of 18%.
Now, moving to the composition of our revenues, the consistent growth in the number of paid subscriptions drove continued growth in subscription revenue during the second quarter, which we reached 34.1 million, an increase of 59% year over year. The shift to enterprise subscription customers continues to increase our per seat revenue, a trend we expect to continue. In addition, the launch of the new NEXIS flex subscription that Jeff discussed, contributed a small portion of the subscription revenue growth. Maintenance continues to be a solid part of the business.
During the second quarter maintenance revenue was 27.8 million down 9% year over year as we continue to successfully convert our enterprise customers to subscription offerings at a healthy uplift in excess of 140%, we are seeing a reduction in the related software maintenance revenue from those customers. In addition, hardware maintenance was up 4% year over year mainly due to price increases, even as the lower integrated solutions revenue in the first half also reduced the associated first-year maintenance revenue. Total subscription and maintenance revenue increased year over year by 19% in the second quarter, subscription and maintenance saw 15% growth for the first half of the year in line with our 2022 financial model and long-term plan. Total combined integrated solutions perpetual and professional services revenue was 35.8 million in the second quarter, driven by lower integrated solutions in the continued transition away from perpetual software licenses.
Integrated solutions revenue was 28 million in the second quarter, a decrease of 11% year over year, as was the case in the first quarter despite continued robust market demand several integrated solutions products were impacted by the global supply chain challenges, limiting our production capacity and our ability to meet customer demand at the end of the quarter. We ended the second quarter with approximately 20 million more than normal of unfilled, contractually committed orders for integrated solutions. The unfilled orders are primarily related to availability of certain chips and power supplies for our Pro Tools hardware, audio control surfaces, and live sound consoles. We expect to deliver significantly more integrated solutions revenue in the second half.
But given the strong demand we’re seeing, we don’t expect to fully catch up on the production and shipments before the end of the year. And as a result, we expect to have an elevated level of contraction committed orders at the end of 2022. As we also indicated during our first-quarter earnings call, risk remained from macro supply chain headwinds, so the recovery could be uneven. And we have factored these risks as we understand them today into our Q3 and full year 2022 guidance.
Perpetual licenses revenue was 2.7 million a decrease of 53% year over year, as we continue to deemphasize perpetual licenses, and focus on strategic subscription revenue. Even with the declining perpetual revenue, total software revenue from subscription and perpetual licenses increased year over year by 35% in the second quarter, as the subscription revenue growth significantly exceeded the perpetual revenue decline. Now, moving to annual recurring revenue, LTM recurring revenue, and annual contract value from long-term agreements. As our business model continues to rapidly move toward subscription, we introduced annual recurring revenue as a new key metric at our Investor Day in May.
The annual recurring revenue based on the analyzation of subscription and maintenance bookings was 231 million in the second quarter, an increase of 28.4 million or 14.1% year over year. Growth in ARR was due to subscription ARR growth of 46% as we continue to drive a favorable conversion of maintenance revenue to subscription revenue plus adding new customers to our subscription business. As expected subscription revenue growth is not always look going to track subscription ARR growth based on a few factors. First, subscription revenue growth for a quarter can vary based on the size and number of enterprise subscription deals.
And we had a favorable comparison this quarter as the second quarter of 2021 had weaker subscription revenue on the enterprise segment. Second, as we discussed at our recent Investor Day, the revenue recognition of multiyear enterprise subscription deals under ASC 606 impacts the timing of the subscription revenue and creates some unevenness that affects comparisons with ARR. Also, the lower integrated solutions shipments in the first half negatively impacted the maintenance ARR at June 30. As the unshipped orders would have contributed about 2 million to maintenance ARR from the first year of maintenance that is bundled with the product sale, impacting a 100 basis points of the ARR growth.
Our focus on growing our recurring revenue continues to drive healthier gross margin and greater predictability in our business. As of the second-quarter LTM recurring revenue was 80% of total revenue up from 76% a year ago and in line with our long-term model. The annual contract value from our long-term agreement was 96 million at the end of the second quarter, up 13% year over year, excluding the subscription and maintenance portion, which is already captured in ARR. This growth is a result of increased ACV from strategic purchasing agreements with our channel partners.
With the addition of ARR, we are going to deemphasize the total ACV metric moving forward, but we have included it in the appendix for reference. Now, let’s look at the operating results for the second quarter of 2022. Total revenue in the second quarter was 97.7 million up 3% year over year. We saw continued robust market demand, but total revenue was constrained during the quarter as we ended the quarter with unfilled contractually committed orders for integrated solutions that were approximately 20 million more than normal.
If we had shipped all these integrated solution orders, total revenue would have been in excess of 115 million for the second quarter. Non-GAAP gross margin was 65.5% for the second quarter, up 160 basis points year over year. Our high-margin subscription business made up a large share of revenue, resulting in the improved gross margin. We expect improving gross margin in our long-term model as we continue to drive robust growth in our subscription business.
Non-GAAP operating expenses were 49.6 million in the second quarter, a $2.5 million increase year over year due mainly to investments to support product innovation to drive our long-term business. Adjusted EBITDA was 16.5 million in the second quarter, up 4% or 700,000 year over year, driven by the improvement in both revenue and non-GAAP gross margin. Adjusted EBITDA margin was 16.9% in the second quarter, an increase of 20 basis points compared to the prior-year period. Finally, non-GAAP earnings per share was $0.26 for the first quarter, up $0.01 year over year.
Now, let us look at the rest of our results for the second quarter of 2022. Our strategy of investing in innovation to drive higher-quality recurring revenue together with the effective cost controls and reduced interest expense has resulted in a sustained trend of continued profitable growth. Free cash flow was 3.2 million in the quarter down 2.4 million year over year due to a 3.1 million increase in capital expenditures associated with our digital transformation and innovation investments, as well as the pressure of lower product deliveries which resulted in lower collections. During the second quarter, we repurchased approximately 560,000 shares for 14.1 million bringing total repurchases to 1.8 million shares for $50 million under the $115 million authorization announced in September 2021.
We will continue to deploy capital prudently in the most responsible way to drive long-term shareholder value. We ended the quarter with a strong financial position with net debt-to-EBITDA of 1.8 times and a healthy liquidity profile of 95 million consisting of our cash balances and unused borrowings under our revolving credit facility. Finally, let’s now turn to guidance. As Jeff said, we are confident in the underlying strength in our business including the healthy market conditions and strong market demand for our solutions that we are seeing.
We expect continued growth in subscription revenue from expected strong performance and enterprise subscription and solid performance from our creative tools. We expect contribution from recent new subscription product introductions, including the first full quarter of Pro Tools Artists, plus our new NEXIS subscription offerings. For the third quarter of 2022, our total revenue guidance is 100 million to 112 million, a similar size range as was provided for our second quarter of 2022 solely related to the supply chain risks to integrated solutions revenue we discussed earlier. Our guidance for third quarter of 2022 subscription and maintenance revenue is 67 million to 70 million, representing at the midpoint to 16.7% year-over-year growth in the third quarter.
Our guidance for third quarter 2022, non-GAAP earnings per share is $0.27 to $0.39, assuming 45 million shares outstanding. Our guidance for third quarter 2022 adjusted EBITDA is 17.5 million to 23.5 million. At this time, we are also reaffirming our full-year 2022 guidance for subscription and maintenance revenue based on the strong demand we are seeing for these solutions. While we are also seeing healthy demand, healthy market conditions, and strong demand for our integrated solutions, the impact from the global supply chain challenges on our integrated solutions business and the expected timing of the recovery from these challenges are adding variability to our full year 2022 business plans.
As a result, we are keeping the same midpoint but widening the range for our full year ’22 revenue guidance to better reflect the range of possible outcomes for the year. Our guidance for 2022 total revenue is now 425 million to 455 million. Our guidance for 2022 subscription and maintenance revenue remains 266 million to 274 million, a range which represents year-over-year growth of 17% at the midpoint. Our guidance for 2022 non-GAAP earnings per share is now $1.37 to $1.53 assuming 45.2 million shares outstanding, reflecting the wider revenue range.
Our guidance for 2022 adjusted EBITDA is now 83 million to 95 million, reflecting the wider revenue range. We are adjusting our guidance for 2022 free cash flow to 45 million to 59 million due to the factors that Jeff mentioned previously, which include first, we’re seeing more rapid adoption of enterprise subscriptions across our global customer base. While enterprise subscription is strategically important for the company and is a positive for our long-term model. It does have different near-term cash conversion characteristics than our individual creative subscription business.
Next, given that we expect the recovery in our integrated solutions to be later in the second half. We currently expect that some of the cash collections from the shipments to fall into early 2023. And third, where we can — we plan to temporarily build up inventories to add buffer stock and provide us greater flexibility to better navigate the variability in anticipated supply chain conditions over the next several quarters, and most importantly, to better meet the strong demand that we’re seeing for our products. With that, I’d like to turn the call back to Whit.
Whit Rappole
Thank you, Jeff. Thank you, Ken. That concludes our prepared remarks, and we are now happy to take your questions. Our first question is from Jack Vander Aarde from Maxim to be followed by Josh Nichols.
Jack, please go ahead. Hold on. Hang on Jack, we’ll come back to you. Our next question will be from Josh Nichols from B.
Riley to be followed by Jack if we can get him. Josh, please go ahead.
Josh Nichols — B. Riley Financial — Analyst
Yeah, thanks. How’s it going? You can hear me OK?
Whit Rappole
Yes, we can. Thanks, Josh.
Josh Nichols — B. Riley Financial — Analyst
Look, I mean, it seems like the subscription business is doing as good or better than people kind of thought, right, just some lingering headwinds on the supply chain side. But before we dive into that, I just wanted to know if you could provide a little bit more color on the company SaaS business. I know, it’s relatively small, but it’s been growing I think you said at the Investor Day it was around like 7 million on a trailing 12-month basis. How is that growing so far? And what’s the opportunity to build that up over the next 12 months is like a third leg of growth for the subscription SaaS piece.
Jeff Rosica — Chief Executive Officer and President
Hi, Josh. This is Jeff. It is a good question. I don’t think we’re going to unveil any more numbers than Ken already estimated at the Investor Day, but I’ll say this.
If you saw today’s announcement, you saw you might have signed up to happen. It came out earlier today that we’ve signed a multiyear agreement with Amazon Studios. That is not in our numbers yet. That’s we won’t be turning that system on too late this year.
But I think we’re still, as you know, we’re on the early cusp of this third leg of growth for us. We see some pretty robust growth in this part of our business over the next three years. And so, we’re very happy with where it’s going. And we’re pretty excited about the agreement with Amazon Studios today because that’s going to be a pretty — I think it’s a pretty big deal in the eyes of Hollywood and the entertainment community.
Ken Gayron — Chief Financial Officer and Executive Vice President
Yeah. And just to add to that, obviously, the growth algorithm we put publicly with, related to our cloud business, as well as our subscription business, the growth algorithm for our creative business, our enterprise business, and our cloud businesses still holds. And as Jeff pointed out, the Amazon announcement will likely accelerate the cloud evolution. So, we’re obviously pleased with the performance of that high-margin subscription business.
Josh Nichols — B. Riley Financial — Analyst
And I was going to follow up about the Amazon deal, congratulations, great to see a win like that multifaceted. Are you able to fire in a bit more detail on the color as far as like, there’s sort of the sizing, the breakdown, right of the revenue better or, if not, do you think the deal is really more emblematic of opportunities to grow across other platforms, given how dominant it’s become over the last few years as far as a media and entertainment company and production company?
Jeff Rosica — Chief Executive Officer and President
Yeah. Well, I think — look, we were not revealing with Amazon the size of the project or the size of the deal. I will say it’s substantial. It’s not just symbolic, it actually is a meaningful agreement that we have with them directly, because what we’re doing is actually helping them outfit their own production capabilities to be deployed globally for a lot of their productions they’re doing for Prime Video.
It is going to be — I think of fuel to help, fuel to Hollywood transition, obviously, it’s a big piece of news that Amazon Studios has made. It also, obviously, it’s Amazon. So, we are going to deploy it on the AWS environment. We’re working together with Amazon to do that deployment.
They actually are helping invest in that cost of that deployment. So, we’re in the midst of working on that now that developments been going on for several months. And — but now, we’ve publicly announced that this has been going on. And later this year, as I said and as release said, our plan is to start to bring that system live for Amazon Studios.
But it is a multi — it’s a sizable multiyear agreement that we’ve signed with them.
Josh Nichols — B. Riley Financial — Analyst
Thanks to that. Last question, honing in on the guidance a little bit, again, wider range, understandable, given what’s going on the supply chain for the hardware piece of the business, at least, could you help quantify like, what’s the delta as far as that you’re kind of factoring in for potential hardware range for the second for the third quarter? And do you have a lot of visibility into how long it’ll take to get this right sized, or at least largely rightsized? Because historically, you’ve done a lot more hardware business like late in the fourth quarter. And is that kind of still the expectation for this year, it’s likely going to be even more heavily fourth quarter-weighted?
Ken Gayron — Chief Financial Officer and Executive Vice President
I would say that, at this time, our seasonal pattern that the fourth quarter is strongest for the company will continue. We also will have much stronger integrated solutions and hardware revenue in that quarter, just given the seasonal pattern. We did widen the range on revenue, given the current supply chain conditions. We do expect gradual recovery and I would say that the recovery is more weighted toward the second half of the year.
Hence, the change in the guidance. We still feel strong about the market demand for our solutions. But we need to temporarily bring up some inventories, if we can, to meet that demand, which along with the timing of the recovery on integrated solutions, plus the growth that we’re seeing in enterprise which has — totally different shorter cast characteristics is the reason why we’re changing the cash flow guidance. Again, we feel good about our long-term model.
We’re right where we want to be in terms of our subscription and maintenance business. And we feel good about the long-term cash flow of the company in terms of the conversion rate.
Jeff Rosica — Chief Executive Officer and President
Maybe I can just add, Josh. You asked the question about the timing. We are always fourth quarter-loaded for a lot of reasons. We will see that this year, for sure.
And we’re not necessarily laying out exactly what the numbers are the variability we see, I think you can see by the implied change in guidance, what the variability is that we see in the business, you can kind of see the numbers pretty clearly. The team is making good progress. We’re seeing some great results. And we’re seeing some good plans for the second half.
But we’re going to be careful, again, this is not about our suppliers and our factories, our factory production capacities, are there what we need, it really is about getting the ample chip supply and other components supply that we need to meet the demand we’re seeing. And we are to be clear, we are seeing healthier demand, and we originally expected this year.
Josh Nichols — B. Riley Financial — Analyst
And it does provide some help. But just to maybe simplify my question, if you have a $20 million backlog right or above normal at the end of 1Q, is your expectation that at the end of the year, that’s more like a $5 million backlog or a $10 million backlog or any type of estimate that you had built into your guidance for here just to get an idea for how much that may flow through?
Jeff Rosica — Chief Executive Officer and President
Well, I wouldn’t say that we would necessarily give that number, Josh, because it really depends on bookings. Our commercial team can book more than we expected. And we could take an even bigger backlog into 2023. What we have modeled is our expectation for increased production, that’s going to happen in the second half, that increased production will be a lot more closer to our normal levels of production.
It will be heavily weighted to Q4, but there will be improvements in the second half from a total production at the end of the semester. But the combination of just catching up to what our normal production levels are is not enough. We’ve got to try to go beyond that because supply or the demand is running even harder than our original expectation for supply requirements.
Josh Nichols — B. Riley Financial — Analyst
Thanks, Jeff. I will hop back in the queue.
Whit Rappole
All right. Next, we have Nehal Chokshi from Northland Securities to be followed by Paul Chung. Nehal, please go ahead.
Nehal Chokshi — Northland Securities — Analyst
Thank you, guys. And nice strong subscription revenue growth, as well as AR growth, both of them accelerate that’s awesome. And it sounds like it’s — enterprise subscription is driving that and that’s a little bit surprising given what you guys have described in the past typically seasonally weak conversions from maintenance subscription during the June quarter for enterprise and then also a weakening macro backdrop. So, given these negative tailwinds, what’s driving these really strong enterprise results?
Jeff Rosica — Chief Executive Officer and President
Yeah. Well, I think first of all, I think the offering we’ve put together — hi, Nehal. This is Jeff. The offering we’ve put together is very competitive and I think it’s really helping solve a lot of business problems and operational problems that our customers have.
When you say the macro, obviously we can all read the news and see the opinions on the macroeconomic conditions. We’re not seeing anything yet ourselves in the customers buying patterns that is weakening across the enterprise customers. We’re seeing still continued strength with them and I think the offering that we’ve put forth on our enterprise subscription offering is very attractive for enterprise customers because they’ve got their own challenges of trying to be more efficient with their content supply chains, how they’re going to produce more content for basically not the same amount of money for sometimes less or same amount of money. So, they’ve got their own strategic priorities that they’re dealing with as the models are shifting.
I think we have a very attractive toolset that has got a very attractive offering for them. And our commercial team is, I would say that our commercial team has built a really great engine on how to take customers to a subscription and I think it’s all showing up to be great success for us. And you’re right. Typically, maintenance-to-subscription conversions are best in Q4 and Q1 period, but I think for all the reasons I just said, we are seeing strength throughout the year lately, and that’s, again, for all the reasons I laid out for you.
Nehal Chokshi — Northland Securities — Analyst
Great. OK. Separate question. The supply chain constructions extended different product lines within the integrated solution.
Jeff Rosica — Chief Executive Officer and President
Well, so the situation has been hitting across the board. I can’t say that there isn’t. Our team is dealing with issues across almost every product we make. Some of those issues are able to be mitigated quickly and resolve quickly others are tougher to solve for us.
So, I don’t want to leave you with — our team is dealing with issues across the board, but again, some are slower to recover from or more difficult to recover from.
Nehal Chokshi — Northland Securities — Analyst
I see. And what was actually the unfilled level above normal levels for the March quarter?
Jeff Rosica — Chief Executive Officer and President
Well, if you remember we said it was in excess of 10 million when we left Q1, and when we left Q2, we’re making clear that it’s in excess — well over 20 million today.
Nehal Chokshi — Northland Securities — Analyst
Great. Thank you very much.
Jeff Rosica — Chief Executive Officer and President
Yes.
Whit Rappole
All right. Thank you, Nehal. Our next question is from Paul Chung at JPMorgan, to be followed by Steve Frankel. Paul, please go ahead.
Paul Chung — JPMorgan Chase and Company — Analyst
Hi. Thanks for taking my questions. So, just on the enterprise adds, is there any kind of seasonality that impacts adds here? I assume they can be lumpy at times. But how do you think about that pace if adds through second half of ’22 and kind of respective impact on pricing? I know, it’s still a small percentage today but any insight on enterprise trends as we move into ’23?
Jeff Rosica — Chief Executive Officer and President
Well, I think, yeah, Paul, good question. I think I would say from a business perspective, I’ll let Ken maybe speak to more of the financial element. But from a business perspective, traditionally, for customers we’re converting from maintenance to subscription, Q4 and Q1 are traditionally the strongest quarters that we seasonally have to convert them to that model. What the team is finding is that because customers are looking at their business and looking at their strategic priorities, we’re finding that we’re getting customers to move anywhere in the year and our team has been very, very good at coming to them with offers that can expand our footprint in these customers.
So, there will always be seasonal strength in Q4 and Q1, but I think we’re seeing some goodness across the year. I mean, Q2 was great, we saw great conversion. I think as we look forward, we see strength in this part of our business for sure. And Paul we’re also expanding the offering and it originally started with just MediaCentral.
We have expanded to now — we can add to that MediaCentral subscription around NEXIS, we’re going to be soon adding graphics products into that offering. So, we’re continuing to expand that offering as we go.
Paul Chung — JPMorgan Chase and Company — Analyst
And then can you expand on the cash impact? What kind of determines the different cash timing? I guess, do certain enterprises pay during certain quarters and how has that evolved?
Ken Gayron — Chief Financial Officer and Executive Vice President
Yeah. So, we typically obviously bill, if it’s a — let’s say a two-year deal, one year we build, the first year and there’ll be a second on the second year so for example, on a two-year deal. So, we’re getting the cash over two years versus a creative which we may be built on an annual basis where they’re paying upfront annually. So, as strategically we move to the enterprise, which is important from a strategic element because it’s stickier revenue higher ARPU as we built the business there is the near-term cash characteristics are longer than a creative individual that is signed in a year and then you typically is paid upfront in the year.
So, that’s what we’re seeing in the cash.
Paul Chung — JPMorgan Chase and Company — Analyst
Then once you start to get some visibility into the multiyear agreement with Amazon, I mean, the impact on revenues and margins, sounds pretty material and provide some nice kind of upside to sales and margins and cash flows, I assume so does this start to accelerate in Q4 or early next year?
Jeff Rosica — Chief Executive Officer and President
I wouldn’t say that. I mean, obviously, Q4 is always a strong quarter for us. When you say material, I mean, look, it’s a sizable contract. I think like many of our enterprise customers they are sizable contracts, it’s similar to some of the other bigger agreements that we have for the enterprise subscription business.
This will be similar to that. Again, we’re not stating numbers, but it’s an important contract. I think also, it’s another example that I think it’s going to help move the industry, help motivate the industry to move faster. From what I’ve seen just today from the responses I’m getting myself even on email or text from customers, it resonated in a big way today across the entertainment business.
Paul Chung — JPMorgan Chase and Company — Analyst
It’s awesome. And then lastly, any FX impact in the quarter and for the year? Thank you.
Ken Gayron — Chief Financial Officer and Executive Vice President
Yes. So, FX was a headwind of $1.5 million in the quarter — for this quarter, in terms of revenue. And at this point, it is impacting us negatively in Q3 as well. So, it is a headwind on revenue.
I would say we do get the benefit on opex on FX, but from an EBITDA net income perspective, it is negative.
Paul Chung — JPMorgan Chase and Company — Analyst
Thank you.
Ken Gayron — Chief Financial Officer and Executive Vice President
You’re welcome.
Whit Rappole
All right. Our next question is from Steve Frankel at Rosenblatt Securities to be followed by Samad Samana.
Steve Frankel — Colliers International — Analyst
Hi. Good afternoon, and thank you. Jeff on the hardware backlog, are you missing or losing some opportunities or market share from customers that need this equipment around advance?
Jeff Rosica — Chief Executive Officer and President
No, not yet, Steve. I think it’s a good question. The team has done a great job. First of all, this problem is hitting a lot of — if you’re talking about the event business, if you’re talking about like live sound and some of the event business all of the suppliers are facing issues across the board on this.
So, I think it’s kind of an even situation with the big suppliers. I’d say that we are starting to see some movement of production on the live sound as an example for events business for the summer and so we’re starting to move some of that you see more of that moving in Q3. But it’s — so far, I’d say we’ve seen really strong demand and demand continues, we’re building a pretty significant contractually contracted backlog for immediate delivery as soon as we can build. So, far, we’re comfortable with it.
And as I’ve talked to our head of commercial, if they’re losing business, it’s a minuscule there’s nothing major they’re losing at this point.
Steve Frankel — Colliers International — Analyst
OK. And then on the perpetual business which dropped much faster than at least I had modeled, is that the new normal? And that reflects these enterprise conversions or was there something else going on in the quarter that caused a significant sequential drop in the perpetual?
Ken Gayron — Chief Financial Officer and Executive Vice President
Yes. So, I would say that on the perpetual business in terms of moving forward, I would say that the level that we have there is probably likely in that range within $1 million per quarter $0.5 million per quarter in terms of that range. We will be looking to optimize price in perpetual to appeal to subscription. There was one, I would say, product area that we did in the perpetual that had a little bit of a headwind this quarter.
We don’t expect any big end of life for the perpetual in the next couple of quarters. So, that’s why I think this area, you’re going to see within $0.5 million to $1 million.
Steve Frankel — Colliers International — Analyst
OK. And then to just drill down on the creative net adds were the smallest number in quite a while. Are you confident that that’s the bottom and do you have marketing programs and other things in the works to help make sure that snaps back in Q3 and Q4?
Ken Gayron — Chief Financial Officer and Executive Vice President
Yeah. So, first, I think on the creative net adds there, if you go back several years, I’m going back to even 2019, Q2 is typically a downturn in terms of the net adds versus Q1 and that’s related to the education cycle. We actually saw in Q2 the lowest sequential drop when you look back three years. And so, I just want to put that in perspective.
That said, we are looking at driving, I would say we did a retiering on Pro Tools that we mentioned, we’re optimizing our go-to-market to drive better performance and I do expect that the creative net adds will improve in the second half of the year versus the Q2 performance.
Steve Frankel — Colliers International — Analyst
OK. Great. Thank you.
Ken Gayron — Chief Financial Officer and Executive Vice President
You’re welcome. Thank you, Steve.
Whit Rappole
Next, we have Samad Samana from Jefferies, to be followed by Jack Vander Aarde. Samad, please go ahead.
Samad Samana — Jefferies — Analyst
Great. Thank you, Whit. And it’s good to hear from you, Jeff and Ken. Hope you’re doing well.
Maybe first, on the Amazon deal, I totally hear you on the timing as far as how it impacts your business but maybe, is there anything else under the hood there in terms of will Avid be using AWS for your own hosting? Are you already using it? Is there a potential gross margin tailwind that we could see, as part of this? I don’t know if there is anything else involved beyond just the Amazon Studio side of the deal.
Jeff Rosica — Chief Executive Officer and President
Yes. No, this is just a deal between Amazon Studios and Avid. We are deploying the Avid Technology stack in the AWS environment. As you know, today Microsoft Azure is our strategic partner.
They continue to be our partner, our preferred partner, they are our partner for all of our SaaS offerings like add-on demand run from the Azure environment, but certain customers are going to want to deploy in an AWS environment. Obviously, Amazon Studios wants to deploy in an AWS environment, no question there. So, we’re working with them to get these systems that they want to deploy, which are basically our core production environment, whether it’s Media Composer or MediaCentral or NEXIS that’s all being — as you know NEXIS was being — is running NEXIS file system is running in the Azure system when we’re done here with Amazon Studios, the NEXIS file system, and the MediaCentral platform will be running natively in the AWS environment for Amazon Studios. There’ll be other customers that want to deploy an AWS environment but no, it doesn’t change our strategic partnership with Azure, which Azure is who hosts all of our enterprise environment runs in Azure.
Samad Samana — Jefferies — Analyst
Great. And then maybe, Ken, I wanted to double click on that FX question. I know you gave the consolidated amount. Can you just for — our focus tends to be on the subscription line most, and so as I think about where that FX exposure actually hits you, how much of that is maybe isolated to subscription like maybe what’s the geo mix there versus the overall revenue mix, words we know from the filings?
Ken Gayron — Chief Financial Officer and Executive Vice President
Yeah. So, $1.5 million is the total. The subscription is likely in the $400,000 range of that $1.5 million, $350,000 to $400,000 range.
Samad Samana — Jefferies — Analyst
OK, great. And then maybe just one more, and then I’ll pass the baton. But just, Jeff, when I think about the changes to the freemium model, and I’m curious what you’re seeing now we’ve had enough time, is there a change to maybe the top of the funnel that’s worth calling out? Is there a change in maybe the retention of who you are converting? Just anything that you can share now that we’ve had enough time to maybe see some patterns there?
Jeff Rosica — Chief Executive Officer and President
I’d say convert numbers — the conversion numbers are still looking very good for us and they’re quite good and I’d say retention is still what we expect in the business. On the freemium model, it is an acquisition tool and we have been leaning into trial. I would say somewhat, what I can say publicly is we’re looking at all that very carefully to understand what our strategy is on the freemium level. I would just say stay tuned maybe some more news coming on that.
Samad Samana — Jefferies — Analyst
Understood, and I will stay tuned. Thanks, gentlemen.
Jeff Rosica — Chief Executive Officer and President
Thanks, Samad.
Whit Rappole
All right. And next, we will come back to Jack Vander Aarde. Jack, are you there?
Jack Vander Aarde — Maxim Group — Analyst
Hey, Whit. Jack’s here. Can you hear me OK?
Whit Rappole
We can. Thank you.
Jack Vander Aarde — Maxim Group — Analyst
All right. Great. Sorry for fudging the microphone earlier but thanks for the update. So, maybe just a quick question for clarity on integrated solutions back orders.
Those are about I guess $20 million at the end of the quarter, and I think I recall similar dynamic last quarter I think it was about $10 million of backlog.
Jeff Rosica — Chief Executive Officer and President
Yes, true.
Jack Vander Aarde — Maxim Group — Analyst
Is this an apples-to-apples comparison — did this accumulate? Did you recognize some of that $10 million during the second quarter? Or just — was that $10 million more building up?
Jeff Rosica — Chief Executive Officer and President
Yeah, it’s building up. But it’s — remember, it’s kind of like a bucket where you’ve got water coming in one side and water going out the other. Obviously, a lot of what we carried over from Q1, some of that was resolved during Q2 but we also got a lot of new orders in Q2. So, the demand, the best way to think about it is the demand is moving faster than our ability to move the supply up.
That’s it why it went from $10 million aggregate to $20 million, it built over the course of Q2 because the demand for the product was coming in faster than we could ship. And so, that’s good news and that demand is very high obviously we don’t like carrying over $20 million in unfulfilled contractually obligated orders that — these are customers who want immediate delivery. This is not backlog for future deliveries, this is stuff that traditionally — Jack, we carry about $1 million or $2 million that we can’t fulfill in one quarter to another. That’s about our traditional pattern.
This is obviously significantly more than that because of the production levels.
Jack Vander Aarde — Maxim Group — Analyst
OK. Gotcha. That’s helpful. Since I fudged the microphone to start a lot of my questions were already asked so I’m going to try more of a fun question or bigger picture topic, given your creative focus, so NFT blockchain web, not sure if you’ve given the idea any meaningful thought or seeing the obvious compelling opportunities that would make sense.
But just like to hear your perspective because in a vacuum or at least on paper, I think the idea has led to when concerning the core competencies and damage technology and product offerings and your target customer basis are technically creative. Is there a place for NFTs or Web 3.0 design with your business and given your young creative base a Pro Tools users, may they want to create an NFT to market themselves? Just wondering if that is a place in your product portfolio?
Jeff Rosica — Chief Executive Officer and President
Well, I wouldn’t necessarily address that directly. I’d say this, our teams are looking at all of these things, including, I mean, the deep fake subjects, AI. I mean, there are so many subjects we’re working on, including things like Web 3.0, etc. But I think that that’s — those are innovation plans our team is looking at what our role is and what, how we could leverage those technologies, but I think a lot of those workflows are still being kind of figured out as an industry.
We’re in that looking at what our role is, I wouldn’t give you a direct answer today, but I would say it’s an interesting space in that there are so many developments technologically that give us some opportunity out there.
Jack Vander Aarde — Maxim Group — Analyst
Got it. And then just to be — one more just to be crystal clear. The long-term plans in May Investor Day recently, that is completely unchanged. You’re still on track and this Amazon announcement is not baked into that at all.
Is that correct?
Jeff Rosica — Chief Executive Officer and President
No. The Amazon say — not baked into it. We consider a lot of things when we look at the — when we look at the forecast and where the business is going. Amazon, a lot of customers are considered in our forecasting of things.
Look, we’ve known about Amazon as a company for several months, we’ve been doing the R&D with them for over six months. So, we’ve known about this a while. This is really just more public information that is now finally coming out.
Jack Vander Aarde — Maxim Group — Analyst
OK, got it. That’s helpful. Well, I appreciate the time. I’ll hop back in the queue.
Jeff Rosica — Chief Executive Officer and President
Thanks, Jack.
Whit Rappole
And that concludes the Q&A session. I’ll now turn it back to Jeff for concluding remarks.
Jeff Rosica — Chief Executive Officer and President
All right, Whit. Thank you for your participation and your questions. In closing, I do want to reiterate that we believe we will continue to see strong demand across the end markets of our solutions, including our growing subscription business. And we are managing through these temporary supply chain headwinds to enable Avid to continue to achieve our company strategy and our long-term growth plan and profitability targets as we move forward through 2022 and beyond.
And with that, I just want to say hope everyone has a nice evening. Thanks again.
Whit Rappole
Thank you. You may all now disconnect.
Duration: 0 minutes
Whit Rappole
Jeff Rosica — Chief Executive Officer and President
Ken Gayron — Chief Financial Officer and Executive Vice President
Josh Nichols — B. Riley Financial — Analyst
Nehal Chokshi — Northland Securities — Analyst
Paul Chung — JPMorgan Chase and Company — Analyst
Steve Frankel — Colliers International — Analyst
Samad Samana — Jefferies — Analyst
Jack Vander Aarde — Maxim Group — Analyst

More AVID analysis
All earnings call transcripts
This article is a transcript of this conference call produced for The Motley Fool. While we strive for our Foolish Best, there may be errors, omissions, or inaccuracies in this transcript. As with all our articles, The Motley Fool does not assume any responsibility for your use of this content, and we strongly encourage you to do your own research, including listening to the call yourself and reading the company’s SEC filings. Please see our Terms and Conditions for additional details, including our Obligatory Capitalized Disclaimers of Liability.
The Motley Fool has no position in any of the stocks mentioned. The Motley Fool has a disclosure policy.
*Average returns of all recommendations since inception. Cost basis and return based on previous market day close.
Market-beating stocks from our award-winning analyst team.
Calculated by average return of all stock recommendations since inception of the Stock Advisor service in February of 2002. Returns as of 08/03/2022.
Discounted offers are only available to new members. Stock Advisor list price is $199 per year.
Calculated by Time-Weighted Return since 2002. Volatility profiles based on trailing-three-year calculations of the standard deviation of service investment returns.

Invest better with The Motley Fool. Get stock recommendations, portfolio guidance, and more from The Motley Fool’s premium services.
Making the world smarter, happier, and richer.

Market data powered by Xignite.

source

What makes Andor’s production stand out? Passion. – Dork Side of the Force

Kassa (Antonio Viña) in Lucasfilm’s ANDOR, exclusively on Disney+. ©2022 Lucasfilm Ltd. & TM. All Rights Reserved.
The latest trailer for Andor has come our way, delivering high-stakes drama, surprise cameos, and tense politics, all as a preview of what it takes to spark a rebellion. It’s been quite interesting to see Andor take shape over the past couple of years, overcoming the question of why it should even exist, just like its predecessor (or sequel?), to preparing for a three-episode premiere that will be the longest yet on Disney+.
“Cinematic” is the word at the top of my mind after seeing this trailer. As many others have commented, it feels a lot like Rogue One, in large part, because of the number of familiar faces involved. That is not just true of frontman Diego Luna or Genevieve O’Reilly and Forest Whitaker reprising their roles as Saw Gerrera and Mon Mothma, respectively. It is even more relevant to the people behind the scenes.
Tony Gilroy was tasked with overseeing Rogue One‘s well-documented rewriting process, and he’s steering the ship here too. Like that film, Gilroy was not initially the man in charge of Andor. Stephen Schiff was Andor’s original showrunner upon its reveal in 2018. Gilroy joined the production in 2019, set to write the pilot and direct multiple episodes. Things evolved from there and he became the official showrunner a year later.
In the time since, he and the cast have given us just a taste of what to expect from Andor. From its human story that can resonate with any audience, Star Wars fan or not, to the dark tone, gritty characters and one-against-many mantra embedded throughout Rogue One.
Another thing to expect is real-world environments.
Disney+ has become a sort of sandbox to experiment with StageCraft. That is the term given to Industrial Light and Magic’s immersive, 360° LED video walls that recreate incredible atmospheres without use of a green screen or the need to travel to physical environments. They can even follow a camera’s movement to add an extra layer of realism.
Tusken Raider rides on a bantha below with the Razor Crest in THE MANDALORIAN, season two. © 2020 Lucasfilm Ltd. & TM. All Rights Reserved.
It proved to be a life-saver amid the constraints of a television budget, even for those as large as shows like Obi-Wan Kenobi and The Mandalorian. Andor, however, wasn’t interested.
“Yep, we’re old-school,” said Gilroy in an exclusive piece from Empire Magazine. “We didn’t use StageCraft at all.” Instead, all of the film’s environments came through either physical sets built at Pinewood Studios or traveling to exotic locations themselves. While we’ve known that would be the case in Andor for a while now, the impact of that decision really starts to show itself with this trailer.
Andor will be the first Star Wars show to push physical locations to the forefront.
Now if you told me the shots in Andor were courtesy of the StageCraft system, I would have believed you. The technology is just that good. But, there is no denying that Andor looks just a little bit better. And the sets could be the reason why.
Even some of the smaller details emphasize the extra polish on Andor. Famed creature designer Neal Scanlan, who provided his expertise to every main Star Wars film, makes his return here. And take a look at what series composer Nicholas Brittell had to say to Variety earlier this year:
The scope of the series is massive. Every episode has new demands, new music, and new ideas. It’s important that as the story evolves, the music should evolve too. We’ve been working nonstop for months, actually years, at this point.
NEW YORK, NY – NOVEMBER 29: Composer Nicholas Brittell attends TimesTalks to discuss “Moonlight” at Brooklyn Public Library on November 29, 2016 in the Brooklyn borough of New York Cit (Photo by Steve Zak Photography/Getty Images)
This quote illuminates an important point, here. Andor is an example of the ingredients that have made Disney’s Star Wars efforts successful: passion and a plan. Yes, practical sets and impressive visual effects help, but they only act as supporting elements to the story that sits beneath them.
The Mandalorian and Rogue One are the biggest examples of that. Andor is seemingly taking the best of both, and while I hate to get overly optimistic or set unrealistic expectations without having even seen a single episode, looks destined to outshine them both, too.
Build your custom DorkSide Daily email newsletter with news and analysis on Star Wars and all your favorite sports teams, TV shows, and more.
Your favorite teams, topics, and players all on your favorite mobile devices.
© 2022 Minute Media – All Rights Reserved. The content on this site is for entertainment and educational purposes only. All advice, including picks and predictions, is based on individual commentators’ opinions and not that of Minute Media or its related brands. All picks and predictions are suggestions only. No one should expect to make money from the picks and predictions discussed on this website. For more information, please read our Legal Disclaimer. If you or someone you know has a gambling problem, call 1-800-GAMBLER.

source

WATCH: Pictoria Vark talks new album, musical inspirations at 80/35 – Iowa Public Radio

CECE MITCHELL: Hi, I’m Cece Mitchell of IPR Studio One. I’m here with Pictoria Vark. Thanks for talking with me today!
PICTORIA VARK: Oh my gosh, thanks for having me. I’m so excited to be talking with y’all at IPR and to be here.
MITCHELL: So, we’re here at 80/35. Is this your first time at the festival?
VARK: No, this is my first time playing my own music, but I was actually here in 2019 playing bass for Squirrel Flower, which was also the last 80/35 before the pandemic, I believe. So it’s really cool to like, have those bookends.
MITCHELL: That’s awesome. So, you played with Squirrel Flower before — what’s your relationship with the Iowa music scene?
VARK: I have really loved being here. It’s where I started my solo project and how I’ve gained a lot of confidence in continuing it. I’m feeling really welcomed pretty immediately, as opposed to kind of my experience in New York, where I was having a lot of trouble just finding a place or a home for my music to really be comfortable in. So that has been so rewarding to like, be here and have that experience.
MITCHELL: How would you describe what your music is?
VARK: Yeah! It’s bass-driven, lyric-focused indie rock with like a little sprinkle of folk and a little sprinkle of like, emo.
MITCHELL: What are your inspirations for your songwriting?
VARK: Oh, good question. I feel like I have so many because I draw from a lot of different places. I’m really inspired by Lindsey Jordan of Snail Mail because she’s… her guitar playing is as characteristic of her music as her lyrics are. And I feel like that resonates really strongly with me as an artist in my creative practice.
MITCHELL: So, what can we expect out of your 80/35 set today? Like, what will you be playing? Anything from the new album?
VARK: Yes, I will be playing a lot of things from the new album. I’m really excited to be playing my song “Out” for the first time, which is very different from the rest of my sound. No spoilers!
MITCHELL: What do you want your audiences to get out of watching you in a performance?
VARK: I think whatever speaks to them in a performance. I’m really trying to think about my live show more and like, being able to do it with the full band allows for more dynamics and kind of a different reach or setup. So, I am really excited to both delve into the softer sides of my sound and the louder sides. And I think whatever resonates or both, yeah.
MITCHELL: So, can you tell me a little bit about this album you just released in April?
VARK: Yeah, The Parts I Dread is about this big move that my parents made when I was 19 from New Jersey to Wyoming, where I’d never been before. And I, in doing that, it kind of cracked open a lot of emotional and like, inner questions about not only my relationship with home and family, but with New Jersey and physical place as well. So, it kind of unravels into those themes as well, with the parts referring to not only like geographic place, but emotional depths as well.
MITCHELL: What’s your favorite song from the album and what’s that song like?
VARK: My favorite song is a song called “Demarest,” which is named after a town close to my hometown in New Jersey. And it’s where the album title comes from. I think it’s one of the most unique songs that I’ve written. I really love how subtle it is, and kind of the bass parts that I crafted around it as well.
MITCHELL: What’s your songwriting process? Have you been songwriting for a very long time?
VARK: Not really. I started writing songs when I was 18, and I’m 23 now. I started just as I was a first year in college at Grinnell. And I have often started with writing lyrics separately, like in a Notes app or in a notebook or something, and then writing these bass parts kind of separately from that. And then, kind of figuring out, piecing together which lyrics go with which bass parts is kind of how this first album was constructed. So, now I’m working on new music and trying to like, see if there are other ways of writing that speak to me or inspire me, but it’s really nice to have that like, solid foundation of: this is how I like approaching music.
MITCHELL: I’m from Grinnell too! Love it there. What brought you from New Jersey to specifically Iowa?
VARK: I was really tired of the like, rat race and the competitiveness of the East Coast and didn’t really ever feel quite at home there. And so, I really wanted to get out of my comfort zone and I really had a good feeling about going to Grinnell and really loved my experience there.
MITCHELL: So, you have a tour coming up. Where are you going to be headed?
VARK: We are going everywhere. It’s my first national tour coming up this fall with La Dispute, who’s from Michigan. It’s really cool to be touring with another Midwest band, but from a different generation. So I’m really excited to travel the whole country with them.
MITCHELL: Who are you most excited to see here at 80/35?
VARK: Japanese Breakfast! Yeah, I’ve never seen them play live yet. I saw a little bit of their soundcheck and they sounded amazing. And this last album was just so inspiring and really beautiful. A beautiful celebration of joy, which I think is so often lacking in music. So, I’m really excited to rush off after my set to go to the main stage.
MITCHELL: Is there anything else that you want IPR listeners to know about you?
VARK: I’m just really excited to be here and share music and yeah, just so grateful to have a place like IPR that is so supportive of local music.
MITCHELL: Well, thank you so much, Pictoria Vark, for your time today, and good luck with your set!
VARK: Thank you so much for having me, so lovely chatting with you.

source

‹ Previous Next ›