Blog

How to get into Vanderbilt's master's degree program in computer science – Fortune

Not all students enrolled in Vanderbilt University’s online master’s program in computer science have followed a traditional path in the industry. Degree candidates come from a wide variety of life experiences and professional backgrounds: the auto industry, banking and finance, music and entertainment, education, engineering, and more. Still, Vanderbilt’s admissions team is looking for some knowledge of computer science, an undergraduate degree, and a proven success record in a given field.
“The folks in our program that don’t have a strict computer science background, have been working in an industry and have already been successful there,” says Jules White, associate dean of strategic learning programs at the Vanderbilt University School of Engineering. “It is very competitive. The worst thing we can do is let someone in who isn’t prepared.”
The program, which ranks No. 1 on Fortune’s list of the best online master’s degree programs in computer science, accepted 52% of applicants for the 2020–21 school year. It currently has between 110 and 120 students per graduating class, offering up to 10 courses to choose from each semester. 
Through interviews with two administrators from Vanderbilt, this article will help guide you through the steps you’ll need to take to get into this top-ranked computer science program:
Going back to school for a master’s degree proves to be worthwhile for thousands of students each year, but it does require a commitment of time and money. Vanderbilt’s computer science master’s is a robust program, demanding up to 20 hours per week outside the classroom in related work. The online curriculum is a direct mirror of what’s offered to students who attend in person on campus. 
“There’s an average of eight years experience in the program,” says White, noting that the Vanderbilt coursework aims to meet the needs and experience level of an experienced student body. “They are more senior and looking to move on to that next step. We have a really superb set of students.”
In the classroom, Vanderbilt faculty aim to offer students hands-on learning through the school’s 30-credit curriculum over three to six terms. Coursework in cloud computing, computer science theory, software engineering, cybersecurity, and more make for an interdisciplinary approach with top-notch professors in a highly academic setting. 
What’s more, master’s degree students in computer science should be prepared for additional commitments outside the classroom. Vanderbilt’s program hopes to help students build a network and peer group to foster sharing of ideas; help with job hunting after graduation; and further build the Vanderbilt alumni community. 
Like many graduate degree programs, Vanderbilt requires several elements in the application, including letters of recommendation and essays. While the school’s selection process doesn’t rely on GRE scores, it does require a solid 3.2 GPA in undergraduate work for admission—but life and work experience carry a tremendous amount of weight, too. 
“If someone is the CTO at a major company, I couldn’t care less what their GPA was,” says White. “There’s always a balance of how you compare across age groups, experiences, and education levels. We are trying to find people who are going to be engaged, and it’s the right time and right fit.”
Overall, Vanderbilt is looking for students who have a solid educational background, life experience, and a clear sense of what’s next in their careers. 
To secure an acceptance letter from Vanderbilt, it’s important to focus on what makes you a unique asset to the program. Applicants come from all age groups, industries, and experience levels, so being able to share research, side projects, or internships during the application process help would-be students stand out from the competition, according to White. 
Demonstrating an innovative or entrepreneurial spirit can accomplish the same. “If someone hasn’t had a strong academic background or internship, having an entrepreneurial background is another thing,” says White. “They are going beyond what they are learning or taking what they learn in class and applying it in unique and novel ways; that’s a great indicator.”
More students are coming to the online program from nontraditional and unconventional professional and academic backgrounds, according to Joanne Wang, assistant dean for professional and external education programs at Vanderbilt. “The online program gives people an opportunity they wouldn’t have had,” she says. “Maybe they know how to code or did a boot camp. This gives them an opportunity to formalize their degree.” 
That’s why, Wang adds, being able to show the way you think, what sorts of projects you’ve worked on, and how you solve problems in the application process is increasingly important. 
People pursuing a career in computer science must be comfortable with the continuous learning that’s inherent to this field—and your application is a good opportunity to demonstrate your flexibility. 
“As a computer scientist, there’s one thing I can guarantee you: The specifics, the languages, the technology, it will be completely different in 10 years,” says White. “You’ll have to relearn if you want to stay relevant. You’ll have to be retraining yourself to advance.” 
Leveraging your essay or letters of recommendation to show how you’ve learned and capitalized on new skills throughout your career or undergraduate work will show the Vanderbilt admissions team that you can not only handle the rigor of learning new skills in the program, but that you’ll carry that effort over time as technology and innovation continue to shape the industry as a whole. 
White says computer scientists who’ve advanced over time in their careers are already at an advantage. “If you see someone progressing professionally—it’s unlikely you can’t manage that,” he adds. “There’s always the person who is a 10x software engineer. They are always retraining themselves but also understand the fundamental principles. That type of person is very successful in this program.”
See how the schools you’re considering fared in Fortune’s rankings of the best master’s degree programs in data science (in person and online), nursing, computer science, cybersecurity, psychology, public health, and business analytics, as well as the best doctorate in education programs and MBA programs (part-time, executive, full-time, and online).

source

How To Mix And Master in FL Studio | Hindi | Free Giveaway Alert

Stock Market Today: Dow, S&P Live Updates for Oct. 5 – Bloomberg

Bloomberg Surveillance. Live from London and New York, bringing insight on global markets and the top business stories of the day.
The economy and markets are “under surveillance”. Bloomberg Surveillance, covering the latest news in finance, economics and investments.
Part social gathering spaces, part retail meccas, malls were once the centerpiece of the suburban American experience. Now, faced with challenges from all sides, most are barely hanging on. Here’s what happened to American malls.
Ghana Hikes Rates Again to Curb Fastest Inflation in Two Decades
World Bank Cuts India Growth Forecast Citing Global Risks
The CEO of Royal Albert Hall Sees Little Threat From Spotify
Peloton to Cut 500 More Jobs in Effort to Save the Company
Uber Revives Self-Driving Taxi Dreams, Plans to Start This Year
Uber Revives Self-Driving Taxi Dreams, Plans to Start This Year
Elon Musk’s Twitter Takeover Slightly Less of a Done Deal, Shares Suggest
Peloton to Cut 500 More Jobs in Effort to Save the Company
Kim Jong Un’s Silence as Missiles Fly Shows Shift in Strategy
Nord Stream Leaks Caused by Detonations in Sign of Sabotage
Sanctioned Russian Billionaire’s Superyacht Turns Up in Hong Kong
UK Proposes Easing Pension Fee Cap in Win for Private Equity
Brittney Griner At ‘Weakest Moment’ in Russia, Her Wife Says
The CEO of Royal Albert Hall Sees Little Threat From Spotify
Have You Seen the Latest Polls? Now Forget Them. Here’s Why.
OPEC+ Cuts Are Just One Headache for Oil Markets
Ian Shows Band-Aids Won’t Solve Florida’s Insurance Crisis
‘I Am Energy’: Inside the Bang Billionaire’s Reeling Empire
The Massive Gas Field That Europe Can’t Use
How Hidden Risks at Pension Funds Almost Toppled Britain’s Bond Market
Banks Sent $1 Billion to South Sudan for Food and Medicine That Vanished, Probe Finds
‘Scrubs’ Producer Eric Weinberg Charged With 18 Counts in Sex Assaults on 5 Women
This Cardboard-Clad SUV Would Be Better for Your Wallet and the Environment
North America Heat Waves Led to Unprecedented Ice Melt in Greenland
Michigan Lures $1.6 Billion Battery Factory in Fight for EV Jobs 
How to Solve the Great Urban Restroom Shortage
Hong Kong Seeing Rebound in Shared Offices After City Opens Up 
Animoca Charts Path from Gaming Studio to Crypto VC
Crypto Lender Nexo’s Co-Founders Rebuff Insolvency Speculation
Hamilton Lane Preps Tokenized Funds to Draw Individual Investors

For many stock traders, it felt just about right that the market would take a breather after the dramatic rally of the past couple of days.
After a bounce that started around noon in New York and was attributed to a big options trade, the S&P 500 came back lower again. For a market plagued by fears about a recession and the Federal Reserve’s struggles to tame high inflation, the rebound from this year’s bottom has maybe gone too far, too fast.

source

Kingdom Hearts: Who Is The Master Of Masters? – TheGamer

There are a lot of secrets hiding beneath that hood.
In 2002, Square Enix developed a game that was unlike any we’d ever seen. The studio found a magical recipe by combining the charming, loveable characters of Disney with the rugged, overly emotional characters of Final Fantasy. The result was the birth of Kingdom Hearts, a story about three friends seeking adventure and a fateful battle between light and darkness.
RELATED: Kingdom Hearts Timeline, Explained
The Kingdom Hearts series contains 13 games that span multiple platforms. Fans of the series will be the first to tell you the plot is extremely convoluted, as many games occur at different points of the overarching timeline. But at the center of it all is a mysterious cloaked man who goes by the Master of Masters. The importance of this character can easily be lost in the chaos, so let’s dive into who exactly is this hooded figure.
Before Sora dreamed of leaving the comforts of Destiny Islands, the Master of Masters also wished to seek other worlds. As a young boy, the Keyblade War ravaged his world and he lost many loved ones in the battles. He swore to defeat the Darkness and trained himself in becoming a Keyblade Master. When he grew older, the Master of Masters left his homeworld and arrived in Daybreak Town, where he began crafting his master plan.
First, the Master of Masters created a Keyblade from one of his eyes called the Gazing Eye. He used this Keyblade and his innate powers of foresight to create the Book of Prophecies. This book would depict specific events in the future, but not the complete future. However, the Gazing Eye allowed him to also see through the weapon, so by combining both the Keyblade and the Book of Prophecies, the Master of Masters could foresee the future.
During his early time in Daybreak Town, the Master of Masters became somewhat acquainted with Darkness. Because he could foresee the future, the Master of Masters wasn’t afraid of Darkness, and ultimately, was more powerful than Darkness. But in order to completely defeat the entity, he had to follow a strict plan that would take several lifetimes to come to fruition. Creating the Book of Prophecies was the first step; next, the Master of Masters assembled his disciples.
The Master of Masters continued studying the X-blade, and when he felt that his powers reached their limit, he decided to take in six apprentices: Luxu, Ira, Gula, Invi, Aced, and Ava. The Master created Keyblades from each of their hearts and began training them to become Keyblade Masters. In addition to gifting them their own Keyblades, the Master of Masters also bestowed a copy of the Book of Prophecies to each apprentice, except Luxu.
Related: Kingdom Hearts: Why Is Sora So Special?
Excluding Luxu wasn’t by accident. In order for the Master’s plan of defeating Darkness to take shape, he had to first alienate Luxu from the rest of the Foretellers. The Master tells Luxu of his plan that there will be 13 forms of Darkness, to which seven of them shall be defeated by the Foretellers. The other forms of Darkness would be left up to the future generations of Light. Confused by the notion of using the others as pawns, Luxu reluctantly proceeds with the Master’s plan. But because of the Book of Prophecies and the Gazing Eye, the Master knew Luxu would have his doubts, and that’s why he was branded the Traitor.
Once the Foretellers had achieved the status of Keyblade Master, the Master of Masters set the final phase of his plan. He elected Ira to be the leader of the Foretellers and convinced Aced to be his right-hand man. Knowing that Aced would try to wrestle command from Ira at the first sight of complacency, Ira would be forced to take action against the Darkness. Ira’s actions would set the next Keyblade War into motion, which was paramount for the Master’s plan. Ultimately, the Master’s plan worked to perfection, as the Keyblade War occurred at the hands of Xehanort and Luxu, disguised as Xigbar.
It’s believed that the Master of Masters either derived from Quadratum or he found it in his early travels. The Master of Masters described Quadratum as a “world where neither light nor darkness can be controlled” to Darkness in Daybreak Town. After the Master of Masters trains the Foretellers and appoints Ira as his successor, it’s assumed that he disappears to Quadratum.
Although the Master of Masters orchestrated the entire Kingdom Hearts story, he did it primarily from the shadows. His mere presence could be missed entirely without playing key games like Kingdom Hearts X, and when he appears at the end of Kingdom Hearts 3, he’s just a cloaked figure. But his appearance at the end of Kingdom Hearts 3, combined with the first reveal trailer of Kingdom Hearts 4 showing Quadratum, implied that the Master of Masters will continue playing a key role in the series moving forward.
NEXT: Kingdom Hearts: What Is The X-Blade?
Avery Feyrer earned a Bachelor’s Degree in Journalism from the Walter Cronkite School of Journalism and Mass Communication at Arizona State University. He experienced working as a Web Content Editor at the local sports radio station in Arizona, before realizing his true passions were in games. Avery began writing game reviews for his website (coffeescorner.com) before becoming a regular contributor to MP1st, and now, a Staff Writer for TheGamer. You can find Avery on Twitter @CoffeeBlack_910.

source

Suzan-Lori Parks Is on Broadway, Off Broadway and Everywhere Else – The New York Times

Advertisement
Supported by
The first African American woman to win the Pulitzer Prize in drama has four shows this season. “If you can hear the world singing, it’s your job to write it down,” she said.
Send any friend a story
As a subscriber, you have 10 gift articles to give each month. Anyone can read what you share.

Suzan-Lori Parks is drawn to archways. Early on in her New York life, long before she became one of the nation’s most acclaimed playwrights, she lived above a McDonald’s on Sixth Avenue — the Golden Arches. Then she moved out by Brooklyn’s Grand Army Plaza, with its triumphal Soldiers and Sailors Memorial Arch. Now she lives in an apartment overlooking the marble monument honoring the nation’s first president at the entrance to Washington Square Park.
“It’s very symbolic,” Parks told me. “I’m always orienting myself to arches.”
Arches, of course, are gateways, portals between one world and another, and Parks is endlessly thinking about other worlds.
This season, audiences will have ample opportunity to join her.
A starry 20th-anniversary revival of “Topdog/Underdog,” her Pulitzer Prize-winning fable about two brothers, three-card monte and one troubling inheritance, is in previews on Broadway. “Sally & Tom,” a new play about Parks’s two favorite subjects, history and theater, but also about Thomas Jefferson and Sally Hemings, has just begun performances at the Guthrie Theater in Minneapolis. “Plays for the Plague Year,” Parks’s diaristic musings on the first year of the Covid-19 pandemic and a coincident string of deaths, including those of Black Americans killed by police officers, is to be presented next month at Joe’s Pub, with Parks onstage singing and starring. And “The Harder They Come,” her musical adaptation of the 1972 outlaw film with a reggae score, will be staged at the Public Theater early next year.
“I’m like a bard,” she said. “I want to sing the songs for the people, and have them remember who they are.”
At this point in her career, Parks, who in 2002 became the first African American woman to win the Pulitzer Prize in drama, is a revered figure, regularly described as one of the greatest contemporary playwrights.
“She occupies pretty hallowed air: She’s the one who walks among us,” said the playwright Branden Jacobs-Jenkins, who teaches playwriting and performance studies at Yale.
“She’s the reigning empress of the Black and weird in theater,” he said. “And she really is the most successful dramatist of the avant-garde working today.”
PARKS HAS BEEN TELLING STORIES since she was a child. She wrote songs. She tried writing a novel. There was a period when she made her own newspaper, called The Daily Daily, reporting on what she saw through a Vermont attic window. (She was born in Kentucky, and moved frequently because her father was in the military.)
While an undergraduate at Mount Holyoke, she had the good fortune to take a creative-writing class at nearby Hampshire College with James Baldwin, who suggested she try playwriting, and, even though she feared he was just trying to politely steer her away from prose, she did. “That’s what I’m doing still,” she said. “Trying theater.”
Her apartment is filled with evidence of a furiously busy creative life: shelves heaving with plastic crates containing thoughts on pending and possible projects; elements of a second novel marinating on a wallboard cloaked by a blanket; index cards in Ziploc bags; a laptop perched on a crate atop the dining table; lyric revisions in notebooks on a music stand by an ever-at-the-ready guitar. (She is a songwriter who occasionally performs with a band; this season’s four productions all feature music she wrote.)
“Writing, I think, is related to being kind of like a witch,” she said as she showed me around. “Writing is magical. I loved mythology, and folk tales, and I could hear them — old stories — not in a recording of something that somebody living in my presence had told me, but if you listen, you can hear organizational principles of nature, which includes the history of people, which is narrative.”
So writing is listening? “Not in a passive way,” she said. “I’m on the hunt.” By this point, she was on her feet, pantomiming the stalking stance of a wild cat, preparing to pounce. “You’re being drawn toward it, and you’re reeling it in at the same time, like a fisher.”
As she talked, she kept cutting herself off, reaching for ways to differentiate her craft. “There’s a lot of writers who have ideas, and they have an agenda, and that’s cool,” she said. “I think I’m something else.”
Digging in to the question of why she writes, she became more and more expansive, reflecting on the songlines of Indigenous Australians, which connect geography and mythology.
“We have our songlines too — we just forgot them a long time ago,” she said. “They’re encoded in all the religious texts. They’re in African folk tales. They’re in the stories that your mom or your grandmother taught you. They’re there, and I can’t get them out of my head.”
“If you can hear the world singing,” she added, “it’s your job to write it down, because that’s the calling.”
PARKS IS NOW 59, and her work has been in production for 35 years. In 1989, the first time The New York Times reviewed her work, the critic Mel Gussow declared her “the year’s most promising new playwright.” In 2018, my critic colleagues at The Times declared “Topdog/Underdog” the best American play of the previous quarter century; explaining the choice, Ben Brantley, who was then the paper’s co-chief theater critic, described Parks as “a specialist in the warping weight of American history,” and declared, “Suzan-Lori Parks has emerged as the most consistently inventive, and venturesome, American dramatist working today.”
“She is a genre in and of herself,” said the playwright James Ijames, who won this year’s Pulitzer Prize in drama for “Fat Ham.” And what is that genre? “It is formally really dazzling, in terms of how she structures the play; there is humor underpinned with horror and political satire; there’s this real thread of the blues and folkways and things that are just root Black American signifiers; it’s musical, it’s whimsical, it’s playful, and it’s dangerous — all of the stuff that’s so exciting to see onstage.”
Her early plays were experimental (“opaque,” Brantley once wrote). The recent plays have been more accessible, for which Parks makes no apologies.
“People — not you, but people — when they ask that question, they’re like, ‘Oh, so now you’re selling out! You’re getting more mainstream and you’re not being true to your roots!’” she said. “Oh, no. I’m becoming more and more and more true. Trust me on this one: I’m following the spirit, no doubt. So, yeah, ‘Plays for the Plague Year’ looks like real life, cause it is. So maybe we ought to think about what am I writing about, and if I’m true to what I’m writing about.”
Reflecting her singular stature, Parks has an unusual perch from which to work: She is a writer in residence at the Public Theater, where she receives a full-time salary and benefits. At the Public, she also conducts one of her great ongoing experiments, “Watch Me Work,” a series of events, in-person before the pandemic and online now, at which anyone can work on their own writing while she works on hers, and then they talk about creativity. Early in the pandemic, Parks held such sessions online every day.
“Her great subject,” said the Public’s artistic director, Oskar Eustis, “is freedom. It’s both what she writes about, and how she writes.”
As part of her arrangement with the Public, Parks is also an arts professor at N.Y.U., which is how she wound up across from Washington Square Park, where she lives in faculty housing with her husband, Christian Konopka, and their 11-year-old son. For years, they shared one bedroom; this summer, they finally scored an upgrade, just 70 steps down the hall (their son counted), but now with a bit more space and that archward view.
She has surrounded herself with a striking number of good-luck charms: not only the pink unicorn balance board on which she stands while typing, but also a tray of unicorn plushies; James Baldwin and Frida Kahlo votive candles; a hamsa wall hanging she picked up at a flea market; milagro hearts from Mexico; Buddha, Ganesh, rabbit and turtle figurines; and a deck of tarot cards (yes, she did a basic reading for me; I drew the high priestess card). Also: she has tattooed into one arm, three times, a yoga sutra in Sanskrit that she translated as “submit your will to the will of God.” (She calls herself a “faith-based, spiritual-based person,” and is also a longtime practitioner of Ashtanga yoga, which she does every morning, after meditation and before writing.)
“All the help I can get, baby,” she said.
THE MANY ARTIFACTS on display in her apartment include a shelf set up as a shrine to Baldwin, a dollar bill Parks collected when, feeling the need to perform, she tried busking in a subway station, and a “Black Lives Matter” placard she held at protests during the summer of 2020, when she also signed the “We See You White American Theater” petition, written by an anonymous collective, calling for changes in the industry.
“Hey, I’m angry as the next Black woman,” she said. “And yet, to get through this, we need to also listen — listen to the voice of anger, listen to the voice of love, listen to the voice of wisdom, listen to the voice of history.”
She added, “Let’s not just stand around telling people that they suck. At least where I come from, that’s not a conversation, and, at least where I come from, that’s not good dialogue.”
The tone of some of the conversation around diversity in theater is clearly a concern of hers — that’s obvious in “Plays for the Plague Year,” which, in the most recent draft, contains a playlet called “The Black Police,” in which three “Black Cops” approach a “writer,” played by Parks, and say, “We’re here to talk with you about your blackness/Why you work with who you work with.”
In our interview, Parks said she was troubled by “the policing of Black people by Black people, and not just in the arts,” adding, “we have to wake up to the ways we are policing each other to our detriment.”
“No more trauma-based writing!” she said. “These are rules. And Suzan-Lori Parks does not like to be policed. Any policing cuts me off from hearing the spirit. Sometimes the spirit sings a song of trauma. I’m not supposed to extend my hand to that spirit that is hurting because it’s no longer marketable, or because I should be only extending my hand to the spirits who are singing a song of joy? That’s not how I want to conduct my artistic life.”
She also said she is troubled by how much anger, at the Public Theater and elsewhere, has been directed at white women. “Not to say that Karen doesn’t exist. Yes, yes, yes. But it’s interesting that on our mission to dismantle the patriarchy, we sure did go after a lot of white women. If you talk about it, it’s ‘You’re supporting white supremacy.’ No, I’m not. I’m supporting nuanced conversation. And I think a lot of that got lost, and lot of times we just stayed silent when the loudest voice in the room was talking, and the loudest voice in the room is not always the voice of wisdom.”
THIS SEASON, SHE’S PIVOTING back toward the stage after a stretch of film work in which she wrote the screenplay for “The United States vs. Billie Holiday,” and was a writer, showrunner and executive producer of “Genius: Aretha,” both of which were released last year.
At the start of the pandemic, she assigned herself the project that became “Plays for the Plague Year,” writing one short play each day for 13 months. The discipline was a familiar one: In 2002, after winning the Pulitzer, she began “365 Days/365 Plays,” then she did another daily playwriting exercise during the first 100 days of the Trump presidency. The pandemic play is part personal history — how the coronavirus affected Parks and her family — and part requiem for those who died during that period, from George Floyd to Parks’s first husband. The play, like much of Parks’s work, features songs she wrote. “I was moved into other states, where I wasn’t just documenting what happened that day, but I wanted to sing,” she said.
She’s got plenty still to come — she’s still polishing “The Harder They Come,” which will feature songs by Jimmy Cliff and others, including Parks, who said the story, set in Jamaica, “really captures a beautiful people in their struggle.” She’s then hoping to turn to that second novel (a first, “Getting Mother’s Body,” was published in 2003).
She is planning a screen adaptation of “Topdog,” as well as a new segment of her Civil War drama “Father Comes Home From the Wars” (so far, three parts have been staged; she said she expects to write nine or 12). Also: she’s writing the book, music and lyrics for an Afrofuturist musical, “Jubilee,” that she’s developing with Bard College; “Jubilee,” inspired by “Treemonisha,” a Scott Joplin opera that was staged on Broadway in 1975, is about a woman who establishes a new society on the site of a former plantation.
On a recent afternoon in Minneapolis, Parks settled in behind a folding table to watch a stumble-through of “Sally & Tom,” which is being developed in association with the Public, where it is expected to be staged next fall. The work, directed by Steve H. Broadnax III, is structured as a play-within-a-play — it depicts a contemporary New York theater company in the final days of rehearsing a new play about Jefferson’s relationship with Hemings, an enslaved woman. Parks has had a longtime interest in Jefferson and Hemings, and at one point had worked on a television project about the relationship that never got made; the play, she said, is not a straight historical drama, but “about how the world is made, and how we live in this country.”
The protagonist is a playwright who, like Parks, is warm but exacting, and is rewriting and restructuring the show as opening night nears. When I asked Joseph Haj, the Guthrie’s artistic director, how much he thought the play was about Parks, he at first shrugged it off, saying artists are always present in their work. After the run-through, he grabbed me to amend his remarks. “I take back everything I said,” he said. “I see her all over this.”
Kristen Ariza, who is playing the playwright as well as Hemings (the fictional playwright stars in her own play) said “the play is full of humor, until it’s not.”
“It feels so meta, because we’re doing the play, within the play, and we’re doing all these things like within the play,” she said. “She’s constantly questioning, ‘Does this fit? Is it working? Is it flowing correctly? She’s hearing our voices and adding things and making things work better as we go.”
A few days later, Parks was in Times Square, watching an invited dress rehearsal for “Topdog/Underdog.” The set is draped in a floor-to-ceiling gold-dipped American flag, meant, the director, Kenny Leon, told me, to reflect the way commerce infuses the culture.
Two actors who have enjoyed success onscreen, Corey Hawkins (“In the Heights”) and Yahya Abdul-Mateen II (“Watchmen,” “Aquaman”), play the story’s brothers, mischievously named Lincoln and Booth. They share a shabby apartment; Lincoln, fatefully, works as a Lincoln impersonator at an amusement park where patrons pretend to assassinate him, while Booth makes ends meet by shoplifting. Their relationship to each other, to truth-telling, and to their shared history is at the heart of the story.
Both actors encountered the play as undergraduates; Hawkins was a stagehand on a production at Juilliard, and Abdul-Mateen read a few scenes as Booth while at Berkeley. “It’s the first piece of material that I ever performed on a stage that I felt like was written for someone like me,” Abdul-Mateen said.
Like many people I spoke with, Abdul-Mateen was particularly struck by Parks’s ear for dialogue. “It’s as if she eavesdropped on these two characters,” he said, “and just wrote everything down as she heard it.”
Hawkins called the play “an ode to young Black men who don’t always get to live out loud.” And he is embracing that opportunity — one night, he called Parks at 2 a.m. to discuss a section of the play; she has also helped him learn the guitar, which he had not played before getting this role. “There’s something very grounding about that peace that she carries,” he said. “When she walks in the room, she carries the ancestors, the people we’re trying to honor, with her.”
Shortly after we hung up, my phone rang: Hawkins again, this time with a reverential plea. “Make us proud, man,” he said. “She’s a national treasure for us.”
Advertisement

source

Russia-Ukraine war: Russians flee Lyman as Ukrainian troops retake city a day after Putin’s illegal annexation – as it happened – The Guardian

Russian defence ministry says troops have withdrawn amid ‘threat of encirclement’
Russian troops have pulled out of the town of the strategic city of Lyman in eastern Ukraine “due to the risk to be encircled” and moved to “more advantageous frontiers”, Russia’s ministry of defence said via Telegram on Saturday.
Ukraine forces encircled Russian forces in the eastern town earlier on Saturday where Russia’s forces at Lyman totalled about 5,000 to 5,500 soldiers. Ukrainian soldiers were later seen raising the nation’s flag before the entrance sign to the city.
The retreat comes a day after Vladimir Putin signed “accession treaties” formalising Russia’s illegal annexation of four occupied regions in Ukraine, marking the largest forcible takeover of territory in Europe since the second world war.
Serhii Cherevatyi, spokesperson for Ukraine’s eastern forces, previously said:

Lyman is important because it is the next step towards the liberation of the Ukrainian Donbas. It is an opportunity to go further to Kreminna and Sievierodonetsk, and it is psychologically very important.
It’s slightly past 11pm in Kyiv. Here’s where things stand:
Germany’s defence minister, Christine Lambrecht, made a surprise visit to Ukraine on Saturday, her first since Russia’s invasion in February as Kyiv urges Berlin to send it battle tanks. Lambrecht visited the southern port city of Odesa, the German defence ministry said, without saying how long the trip had lasted. It added on Twitter that she had met her Ukrainian counterpart, Oleksii Reznikov.
The Nord Stream 2 pipeline is no longer leaking under the Baltic Sea because an equilibrium has been reached between the gas and water pressure. “The water pressure has more or less closed the pipeline so that the gas which is inside can’t go out,” Nord Stream 2 spokesman Ulrich Lissek told AFP.
Ukraine’s president, Volodymyr Zelenskiy, said fighting was continuing in the key town of Lyman, which Russia said earlier in the day its troops had abandoned to avoid being trapped. “The Ukrainian flag is already in Lyman in the Donetsk region. Fighting is still going on there,” Zelenskiy said in his nightly video address.
Belarus is preparing to receive Russian soldiers and equipment, the Kyiv Independent reports. There are currently around 1,000 Russian soldiers in the country.
Yuliya Kovaliv, Ukraine’s ambassador to Canada, said her country holds Russia to account for violating Ukraine’s sovereign airspace by bombing airports, which goes against the 1944 agreement that set out core principles for global aviation. “It is important that all the ICAO members addressed such a drastic breach of the Chicago Convention,” she told Reuters.
After Russia failed to win enough votes for re-election to the United Nation’s aviation agency’s governing council, the French representative told the assembly: “When we have votes in our countries, if we don’t like the result, we don’t ask for another vote.” Russia had a place on ICAO’s 36-member council as one of the “states of chief importance in air transport”. Other members include the G7 countries, China, Brazil and Australia.
Liz Truss has said a series of explosions that severely damaged Russia’s undersea Nord Stream gas pipelines were an act of sabotage. In a joint report delivered to the United Nations last week, the Danish and Swedish governments have claimed that the leaks in the Nord Stream gas pipelines, which can carry gas to Germany, were caused by blasts equivalent to the power of “several hundred kilograms of explosive.”
Ramzan Kadyrov, head of Russia’s region of Chechnya, said Moscow should consider using a low-yield nuclear weapon in Ukraine after a major new defeat on the battlefield. In a message on Telegram addressing Russia’s loss of its stronghold of Lyman in eastern Ukraine, Kadyrov wrote: “In my personal opinion, more drastic measures should be taken, right up to the declaration of martial law in the border areas and the use of low-yield nuclear weapons.”
Germany’s defence minister Christine Lambrecht made a surprise visit to Ukraine on Saturday, her first since Russia’s invasion in February as Kyiv urges Berlin to send it battle tanks, Agence France-Presse reports.
Lambrecht visited the southern port city of Odesa, the German defence ministry said in a statement, without saying how long the trip had lasted. It added on Twitter that she had met her Ukrainian counterpart, Oleksii Reznikov.
+++NEWS+++ Verteidigungsministerin Lambrecht traf heute in der Ukraine ihren Amtskollegen @oleksiireznikov. Wir unterstützen unsere Freunde solange es nötig ist. 🇩🇪🤝🇺🇦 pic.twitter.com/wOBGgV2skS
So far, no Nato country has supplied western battle tanks to Kyiv, despite Ukraine repeatedly asking for Germany to supply it with Leopard battle tanks to assist in its counter-attack against Russia.
Chancellor Olaf Scholz has said he doesn’t want to go it alone on arms supplies and will only take decisions in consultation with his western allies. Berlin has instead struck deals with third countries, which transfer heavy weapons to Ukraine – in exchange for receiving supplies from Germany.
Lambrecht’s visit came a day after the Russian president, Vladimir Putin, declared the annexation of the Ukrainian regions of Donetsk, Luhansk, Zaporizhzhia and Kherson.
These annexations have been unanimously condemned by Ukraine’s allies.
The Nord Stream 2 pipeline is no longer leaking under the Baltic Sea because an equilibrium has been reached between the gas and water pressure, Agence France-Presse reports.

“The water pressure has more or less closed the pipeline so that the gas which is inside can’t go out,” Nord Stream 2 spokesman Ulrich Lissek told AFP.
“The conclusion is that there is still gas in the pipeline,” he added.
When asked how much gas was believed to be in the pipeline, Lissek said: “That is the one-million-dollar question.”
Information on the status of the Nord Stream 1 pipeline leak, which was significantly larger, was not immediately available.
While the pipelines are not currently in operation, they both still contained gas before they fell victim to apparent sabotage, producing four leaks.
Ukrainian president Volodymyr Zelenskiy on Saturday said fighting was continuing in the key town of Lyman, which Russia said earlier in the day its troops had abandoned to avoid being trapped.

“The Ukrainian flag is already in Lyman in the Donetsk region. Fighting is still going on there,” Zelenskiy said in his nightly video address.
Belarus is preparing to receive Russian soldiers and equipment, the Kyiv Independent reports.
⚡️Ukraine intelligence: Belarus prepares to receive Russian soldiers, equipment.

Defense Ministry’s Intelligence Directorate confirmed that Belarus is preparing to welcome up to 20,000 Russian soldiers.

There are currently about 1,000 Russian soldiers in Belarus.
On Russia’s failure to win enough votes for re-election to the United Nations’ aviation agency’s governing council, Yuliya Kovaliv, Ukraine’s ambassador to Canada, said her country holds Russia to account for violating Ukraine’s sovereign airspace by bombing airports, which goes against the 1944 agreement that set out core principles for global aviation.
“It is important that all the ICAO members addressed such a drastic breach of the Chicago Convention,” she told Reuters.
It took Alina three goes at the local conscription centre to get her husband out of Russia’s war in Ukraine.
She knew the local officials managing the mobilisation in her town south of Makhachkala, the capital of Dagestan, she said. So when her husband, who has health problems because of his weight and served in the army more than 15 years ago, was called up, she began hassling them to review his case.
“I told them: ‘What war?’ Have they gone crazy?’ And the top [official] just gave me this sad look,” she said.
But as protests broke out last week in Dagestan and anger grew over the conscription, she said, something changed. Suddenly, they told her that her husband’s call-up was a mistake.
After Russia failed to win enough votes for re-election to the United Nation’s aviation agency’s governing council, the French representative told the assembly: “When we have votes in our countries, if we don’t like the result, we don’t ask for another vote.”
Russia, along with the G7, China, Brazil and Australia, held spots as “states of chief importance in air transport” on ICAO’s 36-member council.
“We’d like to express regret regarding the outcome of the voting,” the Russian representative said.
“We view this as a purely political step and has nothing to do with Russia’s position in the field of civil aviation.”
Russia closed its airspace to airlines from 36 countries, including all 27 members of the European Union, in response to Ukraine-related sanctions targeting its aviation sector following Moscow’s invasion of Ukraine, Reuters reported.
Ukraine’s minister for foreign affairs, Dmytro Kuleba, has thanked the US for its latest assistance package.
In today’s call with @SecBlinken, I thanked the U.S. for its unfaltering support, including the latest $12.35 bln in new security and budgetary assistance. Secretary assured that regardless of any Putin’s illegal steps, the U.S. will keep supporting Ukraine in our just struggle.
Here is some more background on Ramzan Kadyrov’s comments that Moscow should consider using a low-yield nuclear weapon in Ukraine after a major new defeat on the battlefield.
Russia has the world’s largest atomic arsenal, including low-yield tactical nuclear weapons that are designed to be deployed against opposing armies.
Other top Putin allies, including former president Dmitry Medvedev, have suggested that Russia may need to resort to nuclear weapons, but Kadyrov’s call was the most urgent and explicit, Reuters reports.
The influential ruler of the Caucasus region of Chechnya has been a vocal champion of the war in Ukraine, with Chechen forces forming part of the vanguard of the Russian army there. Kadyrov is widely believed to be personally close to Putin, who appointed him to govern restive Chechnya in 2007.
In his message, Kadyrov described Colonel-General Alexander Lapin, commander of the Russian forces fighting at Lyman, as a “mediocrity”, and suggested that he should be demoted to private and stripped of his medals.
“Due to a lack of elementary military logistics, today we have abandoned several settlements and a large piece of territory,” he said.
Kadyrov said that two weeks before he had raised the possibility of a defeat at Lyman with Valery Gerasimov, chief of Russia’s general staff, but that Gerasimov had dismissed the idea.
Liz Truss has said a series of explosions that severely damaged Russia’s undersea Nord Stream gas pipelines were an act of sabotage.
In a joint report delivered to the United Nations last week, the Danish and Swedish governments have claimed that the leaks in the Nord Stream gas pipelines, which can carry gas to Germany, were caused by blasts equivalent to the power of “several hundred kilograms of explosive”.
The UK prime minister was updated on developments in the situation unfolding in the Baltic Sea as she engaged in talks with her Danish counterpart, Mette Frederiksen, in Downing Street on Saturday.
Suspicions have been rising in western capitals that the explosions on the pipelines were attacks carried out by Russia as a means of intensifying pressure in western governments over energy supplies. Russia’s President Vladimir Putin has dismissed any such claims and said in a speech on Friday that “Anglo Saxons” were responsible.
Ramzan Kadyrov, head of Russia’s region of Chechnya, said Moscow should consider using a low-yield nuclear weapon in Ukraine after a major new defeat on the battlefield.
In a message on Telegram addressing Russia’s loss of its stronghold of Lyman in eastern Ukraine, Kadyrov wrote: “In my personal opinion, more drastic measures should be taken, right up to the declaration of martial law in the border areas and the use of low-yield nuclear weapons”.
Kadyrov was speaking a day after President Vladimir Putin proclaimed the annexation of four Ukrainian regions – including Donetsk, where Lyman is located – and placed them under Russia’s nuclear umbrella, saying Moscow would defend the lands it had seized “with all our strength and all our means”, Reuters reports.

source

Printability and microstructure of directed energy deposited SS316l-IN718 multi-material: numerical modeling and experimental analysis | Scientific Reports – Nature.com

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 16600 (2022)
Metrics details
In the present paper, the interrelated aspects of additive manufacturing-microstructure-property in directed energy deposition of SS316L-IN718 multi-material were studied through numerical modeling and experimental evaluation. The printability concept and solidification principles were used for this purpose. The printability analysis showed that the SS316L section is more susceptible to composition change and lack of fusion, respectively due to the high equilibrium vapor pressure of manganese and the more efficient heat loss in the initial layers. However, the IN718 section is more prone to distortion due to the formation of a larger melt pool, with a maximum thermal strain of 3.95 × 10−3 in the last layer. As the process continues, due to heat accumulation and extension of the melt pool, the cooling rate decreases and the undercooling level increases, which respectively result in coarser microstructure and more instability of solidification front in the build direction, as also observed in the experimental results. The difference is that the dendritic microstructure of the IN718 section, due to the eutectic reaction L → γ + Laves, is formed on a smaller scale compared to the cellular microstructure of the SS316L section. Also, the decrease in cooling rate caused the secondary phase fraction in each section (delta ferrite in SS316L and Laves in IN718) to increase almost linearly. However, the hardness calculation and measurement showed similarly, even though with the transition from SS316L to IN718 the hardness is significantly increased due to higher yield strength of the matrix and the presence of Laves intermetallic phase (~ 260 HV0.3), the hardness in each section decreases slightly due to the coarsening of the microstructure from the initial layer to the final.
Nowadays, many engineering structures are made up of multiple materials. This is because meeting various service and performance requirements can hardly be satisfied by one material. Therefore, it is often necessary to use dissimilar materials together. This has led to the generalization of the concept of “multi-material structures” in the engineering sciences. Hence, the role of multi-material structures has been proven and many studies have been done on them in the past. Nevertheless, the evolution of modern additive manufacturing (AM) technology, with distinct advantages such as the ability to produce integrated near net shape complex parts in one step, cost-effectiveness for small-scale production, and high-level customization, has eliminated many of the limitations of conventional manufacturing methods and opened up new dimensions to the development and research of multi-materials1,2. From the subset of metal additive manufacturing processes as the fastest growing sector of AM today3, the directed energy deposition (DED) and the powder bed fusion (PBF) are both of interest in the fabrication of multi-materials. However, DED has become more popular due to its greater flexibility in changing chemical composition during processing4. According to the studies conducted so far, metallic multi-materials processed by DED can be classified based on the type of alloy (mainly Ti, Fe, and Ni alloys) and build strategy (bimetallic, functionally graded, and hybrid materials)5.
Stainless steels/nickel-based superalloys multi-materials are of the most widely used combinations in critical energy industries due to their cost-performance balance tailored to service requirements6. Therefore, given this issue and the inherent characteristics of AM, some of which were mentioned above, various research studies have been done on the additive manufacturing of this type of multi-material in recent years. Lin et al.7,8 studied the microstructure evolution and phase formation in laser rapid forming (LRF) of SS316L/Rene88DT graded material. Shah et al.9 investigated the effect of laser direct metal deposition (LDMD) parameters on the development of SS316L/IN718 graded structure. Savitha et al.10 in a study on additive manufacturing of SS316/IN625 dual materials observed that the yield strength is always comparable to the weaker component (SS316), while Zhang et al.11 in a similar study obtained the yield strength and tensile strength of gradient samples close to IN625 and SS316L, respectively. Carroll et al.12 in determining the cause of cracking in a graded structure fabricated from SS304L and IN625 by DED, demonstrated the role of metal monocarbides in the form of (Mo, Nb)C using thermodynamic modeling by CALculation of PHAse Diagrams (CALPHAD) method. Su et al.13 investigated the effect of various gradient composition in laser additive manufacturing of SS316L/IN718 functionally graded material. They reported that the best combination of mechanical properties (tensile strength of 527.05 MPa and elongation of 26.21%) were obtained with a composition change step of 10%. In another study, Kim et al.14 observed that the formation of defects (pores and cracks) occurs in certain chemical composition ranges of the SS316L/IN718 structure affected by ceramic oxides and their subsequent propagation in the direction of intermetallic and carbide compounds. Moreover, thermal and residual stresses concentrated at the grain boundaries exacerbated the formation of these defects.
An overview of previous studies suggests that most of the efforts have been focused on the experimental study of one aspect of the processing, structure, and properties (materials paradigm) of stainless steel/nickel-based superalloys multi-material. However, given the importance of all the interrelated aspects of the materials paradigm, a comprehensive understanding and the possibility of predicting them in the additive manufacturing of multi-materials can lead to a better framework for controlling them. In addition, the numerical approach can provide a smoother path to achieve that by reducing the time and cost spent on various experiments. Therefore, in the present study, the concept of printability was used through finite element modeling to investigate processing challenges of 316 low carbon stainless steel (SS316L)-Inconel 718 (IN718) multi-material by DED. Also, solidification principles were applied by the modeling results to evaluate the microstructure characteristics and estimate the properties of the multi-material. Besides, experimental studies have been used to better support and analyze numerical results.
In the numerical study, heat transfer modeling during the manufacturing process of multi-material structure, consisting of 7 layers of SS316L alloy and 7 layers of IN718 alloy, was performed by the finite element method (FEM). First, the geometry of a single layer deposition (Fig. 1a) was modeled and after finding the appropriate mesh size, the modeling procedure was repeated using the element birth and death technique for the subsequent layers until the design was completed. It is worth noting that the surfaces of the deposited layers were assumed flat for simplification. The governing equation of the problem (transient heat transfer) can be expressed as follows:
where (x), (y), and (z) are the transverse, building, and laser scanning directions, respectively, and k is the thermal conductivity, (T) is the temperature, (rho ) is the density, ({C}_{p}) is the specific heat, (t) is the time, and (dot{Q}) is the rate of internal heat generation (here by phase change). Also, the matrix form of the differential Eq. (1) can be written as follows:
where, (left[Lright]) and (left[Dright]) are the vector differential operator and conduction coefficient matrices, respectively, which are expressed as:
(a) The geometry of the single-layer deposition (mm). The deposition thickness was considered 0.8 mm according to the results obtained in experimental evaluations. (b) The double ellipsoidal heat source model and its parameters.
The initial and boundary conditions are expressed in Eqs. (5) and (6), respectively:
where ({T}_{a}) is the ambient temperature (298 K), (n) is surface normal, ({h}_{c}) is convection coefficient, (sigma ) is the Stephen–Boltzmann constant, (varepsilon ) is emissivity and (q) is the heat flux generated by the laser beam. Obviously, for surfaces other than those irradiated by the laser beam, the amount of heat flux ((q)) is zero in Eq. (6) and also the heat loss due to radiation (third term) can be ignored. It should be noted that for convenience and to avoid non-linearization due to the radiation heat loss, the third term in Eq. (6) was removed, and instead of ({h}_{c}) a previously developed effective heat transfer coefficient ((h))15 was used, which is a combination of both:
where the units of (h), and (T) are W/m2 K and K, respectively.
Also, to model the laser heat source, owing to the necessity of using the laser conduction mode in the AM process and the experimental observation of the melt pool geometry in the cross-section, a double ellipsoidal power density distribution was considered as shown in Fig. 1b16. In this model, the power density distribution in the front and rear quadrants are defined by the following equations, respectively:
where (Q) is the effective laser power (W), (v) is the scanning velocity (m/s), and (a), (b), ({c}_{1}), and ({c}_{2}) are independent values in determining how the heat flux is distributed. ({f}_{f}) and ({f}_{r}) are the heat fractions for the front and rear quadrants, respectively, with a relation of ({f}_{f}) + ({f}_{r}) = 2 between them.
In this study, the FEM software ABAQUS v. 6.14 was employed to solve the governing heat transfer equation. To increase the solution accuracy, the thermophysical properties as a function of temperature for SS316L and IN718 alloys were extracted from Refs.17,18, respectively, and defined in the software. Also, to take into account the heat transfer due to fluid flow in the melt pool, it was assumed that the thermal conductivity of materials above the solidus temperature up to 3000 K increases linearly with a factor of about three19. Figure 2 shows the mesh system consisting of DC3D8 hexahedral elements used for the final model after the mesh sensitivity analysis. It should be noted that due to the geometric symmetry, only half of it (longitudinal section) was modeled to reduce the calculations. Also, since there is a high thermal gradient in the deposition path, finer meshes were used in that area, as shown in Fig. 2. Finally, 191,808 elements and 226,820 nodes were used for the modeling. Besides, The ABAQUS user subroutine DFLUX was utilized to apply the laser heat flux according to the double ellipsoidal distribution model (Eqs. 8, 9) as a function of the location and time.
The mesh system used for the final model (14-layer structure).
SS316L and IN718 gas-atomized powders with average diameters of 110 and 70 µm, respectively, and SS316L substrate with dimensions of 40 × 40 × 5 mm were used as raw materials. The chemical compositions of the powders are presented in Table 1. A DED additive manufacturing machine with specifications of 1 kW continuous-wave fiber laser of 1080 nm wavelength and ~ 1 mm spot diameter (YFL-1000 model, National Laser Center of Iran), four-channel nozzle delivering powder coaxial with the laser beam, twin powder feeder (model PF 200, Noura, Iran), carrier and shielding Ar gas, and CNC table with 3 degrees of freedom, was employed to fabricate the multi-material sample.
The multi-material structure was fabricated according to Fig. 3a as a unidirectional thin-wall consisting of 7 layers of SS316L and 7 layers of IN718 under the processing parameters presented in Table 2. To validate the FE model, the thermal history (temperature–time diagram) was recorded during the process using a K-type thermocouple (Fig. 3b) embedded in the middle and below the deposition path. The results were compared with the thermal history obtained from the corresponding location in the simulated model. Figure 4 shows the SS316L-IN718 multi-material structure fabricated according to the design shown in Fig. 3a.
(a) Schematic of the multi-material structure (the thermocouple location: in the middle of the laser scanning/deposition path and 1 mm below the substrate surface). (b) Thermocouple and data logger used to measure temperature during the process.
(a) Front view and (b) side view of the SS316L-IN718 multi-material structure fabricated according to Fig. 3a.
To study the metallurgical features of the multi-material, a cross-section was cut from the mid-length of the structure using an electric discharge machine (EDM) and after preparing its surface by standard metallographic methods, it was etched by holding in 15 mL HCl + 5 mL HNO3 solution for 10 s. The optical microscopy (Olympus, Japan) and scanning electron microscopy (FEI ESEM QUANTA 200, USA) were used to qualitatively evaluate the microstructure and quantify its characteristics by ImageJ software. Also, a semi-quantitative evaluation of the constituent elements distribution and the composition of possible phases in the microstructure was performed by an X-ray dispersive energy spectroscope (EDAX EDS Silicon Drift 2017, USA) used in the SEM. The hardness variations in the build direction were measured using a Vickers microhardness tester (Buehler, Japan) on the prepared section at intervals of every 500 µm with a 300 gf load and a dwell time of 10 s. As well, three microhardness measurements were taken at each height of the structure and the mean value was reported to minimize the measurement error.
The concept of printability is the ability of an alloy to resist distortion, chemical composition changes, and lack of fusion as common defects in the additive manufacturing of metal parts20. Similar to the universal concept of weldability in the science of welding metallurgy21, the development of printability can facilitate the challenging selection of the printing process and its parameters for the desired alloy(s) by establishing a comprehensive database and reducing the risk of common defects without additional cost and time22. In this section, after validating the FE model and presenting the initial results, the distortion, chemical composition changes, and lack of fusion defects will be examined for the multi-material.
Figure 5 shows a comparison of the thermal histories obtained from the thermal model and measured by the thermocouple in the same location (in the middle of the deposition length and 1 mm below the substrate surface). As can be seen, the acceptable difference between the numerical and experimental results indicates the proper accuracy of the thermal model, and therefore other results that can be derived from it can be trusted. Figure 6 shows the longitudinal section of simulated melt pools for even layers in the SS316L-IN718 multi-material structure. What can be understood is that as the process progresses, the melt pool size, the extent of re-melting of the previously deposited layers, and the peak temperature increase, which is to be expected given the physics of the problem. The mentioned phenomena can be attributed to two factors: (a) reducing the heat sink effect by the substrate as the process progresses (heat accumulation) and (b) the difference in thermal properties of the base alloys, such as a certain difference in their solidification temperature ranges (SS316L: 1460–1420 ℃ and IN718: 1336–1260 ℃). What is important is the influence of these factors on the printability indicators and the microstructural aspects of the multi-material, which are discussed in this section and the next section, respectively.
Comparison of thermal histories obtained from the FE model (red) and experimental measurements (blue) at the same location.
Temperature field (℃) and the simulated melt pool (gray zone) in the mid-length of layers (a) 2, (b) 4, (c) 6, (d) 8, (e) 10, and (f) 12.
Thermal distortion during the process depends on the alloy properties and the process parameters. The tendency to distortion can be calculated using the maximum thermal strain criterion. Recently, a non-dimensional thermal strain parameter, ({varepsilon }^{*}) (representative of the maximum thermal strain), as a function of alloy properties and process parameters has been developed based on Buckingham’s π-theorem20:
where (beta ) is the volume expansion coefficient, (Delta T) is the difference between peak temperature and ambient temperature, (t) is the deposition time, (H) is the heat input per unit length, (EI) is the flexural rigidity, and (rho ) is the alloy density. The Fourier number (F), which represents the ratio of heat transfer to heat accumulation, can also be rewritten as (alpha /vw), where (alpha ) is the thermal diffusion coefficient, (v) is the beam scanning velocity, and (w) is the length of the melt pool. As can be seen in Fig. 7, with increasing number of layers, the thermal strain generally increases due to the weakening of heat transfer from the melt pool to the substrate and consequently the higher temperature difference ((Delta T)). More importantly, by changing the material from SS316L to IN718, the increase in thermal strain is more noticeable and accompanied by a mutation, the reason for which can be traced to the difference in properties of the two alloys. As mentioned earlier, the IN718 alloy with a lower solidification temperature range results in a larger melt pool (compare Fig. 6d–f to (a–c)). In other words, with a completely different increase in melt pool length ((w)), the much smaller Fourier number ((F)) is placed in Eq. (10). Therefore, a higher thermal strain is accumulated the IN718 section of the multi-material structure. This indicates that the IN718 section is more sensitive to thermal strain and should be given priority in adjusting the AM process parameters to reduce thermal strain based on Eq. (10).
Thermal strain parameter (({varepsilon }^{*})) variations in different layers of multi-material structure.
Since some alloying elements have higher vapor pressure than others, selective vaporization of alloying elements in AM is highly probable which can lead to a considerable change in the chemical composition of the alloy and thus a decrease in its properties such as strength, hardness, and corrosion resistance. The Langmuir equation can be used to estimate the vaporization fluxes of alloying elements, ({J}_{i})20:
where ({P}_{i}) is the vapor pressure of element (i) over the alloy, ({M}_{i}) is the molecular weight of element (i), (R) is the gas constant, (T) is the temperature, and (lambda ) (= 0.05) is a positive fraction related to the condensation of vaporized atoms. Also, the following equation can be used to calculate the amount of vaporized material, (Delta {m}_{i}):
where (v) is the beam scanning velocity, (L) is the deposition length, and ({A}_{s}) is the surface area of the melt pool. Given the volume of deposited material ((V)), the weight percentage of element (i) after vaporization (({W}_{f})) can be obtained by Eq. (13):
where (rho ) is the density and ({W}_{i}) is the initial weight percentage of element (i) in the powder. Figure 8 shows the composition change of the most volatile alloying elements (Mn in SS316L and Cr in IN718) in different layers of the multi-material structure due to vaporization during the DED process. In each section, as the number of layers increases, the loss of alloying elements by vaporization increases due to the higher peak temperature. However, despite higher temperatures experienced in the upper section of the multi-material (i.e. IN718), the composition change in the SS316L section is more severe for the Mn element due to its higher equilibrium vapor pressure. It can be concluded that in the multi-material structure, the SS316L section is more susceptible to composition change, and to minimize it, it should be given priority in controlling the process parameters according to Eq. (13).
Composition change due to vaporization for elements with the highest vapor pressure in different layers of the multi-material structure.
Although the penetration depth is affected by the processing conditions, different alloys in the same processing conditions show different penetration depths due to their unique thermophysical properties, which indicates different susceptibility of each to lack of fusion defect. The sufficient fusion and proper interlayer bonding can be measured by the simple index of lack of fusion, (LF)20:
where (d) is the penetration depth of the melt pool, and (h) is the thickness of the deposited layer. To get a proper bonding between the layers, the penetration depth must be always greater or equal to the layer thickness or in other words LF must be greater or equal to 1. Increasing the dimensions of the melt pool in the upper layers of the multi-material, which can be seen in Fig. 9a by the two indicators of length and depth of the melt pool, reduces the probability of lack of fusion. Therefore, as Fig. 9b shows, the lack of fusion index ((LF)) has an increasing trend with increasing the number of layers due to heat accumulation, and more specifically, in the transition from SS316L to IN718, this trend is distinguished by a greater slope due to the lower solidification temperature range of IN718. In other words, in the SS316L section and especially in the initial layers, lack of fusion defect is more likely to occur, resulting in inadequate bonding between the layers. Therefore, this section of the multi-material structure plays a decisive role in adjusting the process parameters according to Eq. (14) to achieve an integrated structure without lack of fusion.
The variations of (a) the length and depth of the melt pool and (b) the (LF) index in the build direction.
Figure 10a shows the thermal cycles in the mid-length of layers 2, 4, 6, 8, 10, 12, and 14. The thermal cycles are unique to each layer (such in terms of peak temperature and reheating times), which can play an important role in determining the features of the layers, especially in the micro scale. To compare and discuss better, the time derivative of the temperature for each thermal cycle (as in Fig. 10b for the thermal cycle of layer 2) was used to obtain quantitative indicators, such as cooling rate.
(a) Thermal cycles in the middle position of the lengths of layers 2, 4, 6, 8, 10, 12, and 14. (b) The first-order derivative of temperature with respect to time for the thermal cycle of layer 2 in (a).
Figure 11a shows the average cooling rate in the solidification range for each layer. As expected, as the height of structure increases, the cooling rate decreases in the build direction due to heat accumulation and extension of the melt pool. As well, the changes in the cellular/dendritic arm spacing (lambda ) (µm) can be anticipated according to the average cooling rate in each layer using the following equation:
where (CR) is the cooling rate (K/s), and (b) and (n) are the material constants with values of 80 and 0.33 for stainless steel and 39.8 and 0.3 for nickel-based superalloy, respectively23. As shown in Fig. 11b, consistent with the results obtained from the micrographs of corresponding layers (Fig. 12), the microstructure size (i.e. cellular/dendritic arm spacing, (lambda )), in both SS316L and IN718 sections increased independently from one layer to another in the build direction, due to the reduction of cooling rate and as a result more time for growth. However, due to the occurrence of the eutectic reaction L → γ + Laves in the IN718 section (Fig. 12d–f), which will be further explained, a finer microstructure was formed in layers 8–14, despite following the above-mentioned trend. It is also noteworthy that in previous similar studies, a very fine microstructure in the range of 3–10 microns has been observed23,24.
The variations of (a) the cooling rate in the solidification range and (b) the microstructure size (i.e. cellular/dendritic arm spacing, (lambda )) in the build direction.
The cross-section microstructure of SS316L layers: (a) 2, (b) 4, (c) 6 and IN718 layers: (d) 8, (e) 10, and (f) 12. The numbered arrows show the different contrasts selected for EDS analysis and the possible phases.
On the other hand, by determining the temperature gradient ((G)) through the numerical model for each layer in the build direction and having the cooling rate in the relevant position, the advancing velocity of the solidification front or solidification rate ((R)) can also be calculated for each layer ((CR=Gcdot R)). Figure 13a shows that in the upper layers the temperature gradient decreases, and the solidification rate increases due to heat accumulation. Such changes along the structure height, by decreasing the (G/R) ratio (Fig. 13b) can lead to an increase in undercooling and therefore more instability of the solidification front according to the following inequality25:
where ({m}_{L}), ({C}_{s}^{*}), ({k}_{0}), and ({D}_{L}) are the slope of the liquidus line, the solid composition at the interface, the distribution coefficient, and the diffusion coefficient in the melt, respectively. Although thermodynamic calculations can make a more accurate assessment, by changing the material to IN718 rich in various alloying elements, especially with low distribution coefficients (molybdenum and niobium), the ({C}_{s}^{*}) and ({k}_{0}) variables on the right side of inequality (16) increase and decrease respectively, both of which, in addition to the decrease in the (G/R) ratio, cause further instability of the solidification front according to the inequality. As can be realized by comparing the micrographs presented in Fig. 10, the solidification morphology in layers 1–7 (SS316L section) is cellular and in layers 8–14 (IN718 section) is dendritic. However, at the almost defect-free interface of adjacent layers, as shown in Fig. 14a,b for the interface between layers 7 and 8, a planar solidification is observed in a short distance less than 10 µm. It is contrary to the general rule, which can be due to more local temperature gradient at the interface of two adjacent layers than the internal areas of each layer. It is also noteworthy here that the dilution effect between adjacent layers has led to a slight deviation from the primary multi-material design, and the formation of a transition zone and a kind of gradation at the interface of the two alloys, which can be observed by EDS line analysis in Fig. 14c and as reported in some previous studies10,11.
The variations of (a) temperature gradient ((G)) and solidification rate ((R)) and (b) undercooling ((G/R)) in the build direction.
(a) Optical microstructure of the interface between layers 7 and 8. (b) SEM micrograph of the area specified in (a). The distance between the two dashed lines in (b) shows the range of planar solidification. (c) EDS line analysis along the specified path in (b) showing the transition zone at the interface.
Another characteristic feature of the microstructure of each layer is its chemical distribution and phase composition. Figure 15 shows a set of EDS analysis results from areas with different contrasts in the microstructures presented in Fig. 12 (numbered arrows). Considering the results and matching them with previous studies26,27, the multi-material microstructure in the SS316L section mostly consists of austenite phase and a small amount of the delta ferrite phase (δ) in the intercellular regions (Fig. 15a,b, respectively). Also, in the IN718 section, the microstructure consists of the gamma matrix phase (γ) and the intermetallic compound of Laves in the interdendritic regions (Fig. 15c,d, respectively). In fact, during non-equilibrium solidification in both sections, elements with lower distribution coefficients (Cr, Mo, and Si in SS316L and Nb, Mo, Si, and Ti in IN718) were segregated in the intercellular/dendritic regions, and by providing the necessary driving force, have led to the nucleation and growth of the mentioned secondary phases in the final stages of solidification. However, the size and distribution of the secondary phases are not uniform due to different cooling rates during solidification in different layers. As can be seen in Fig. 16, fraction of ferrite and Laves phases in layers 2–6 and 8–12, respectively, increased almost linearly with decreasing cooling rate. This is because by reducing the cooling rate, more time is provided for the diffusion of alloying elements and thus their microsegregation. It should be noted that the thermal cycles caused by the deposition of subsequent layers do not have a significant effect on the secondary phases resulting from solidification through solid-state diffusion, because the necessary temperature and time are not provided to modify or dissolve them28.
The results of chemical analysis and possible phases from the tip position the of arrows (a) 1 and (b) 2 in Fig. 12c and arrows (c) 3 and (d) 4 in Fig. 12f.
Variations in the fraction of ferrite and Laves phases with the cooling rate (during solidification) in different layers and the linear regression analysis of each.
It is possible to predict the hardness distribution along the structure using the thermal analysis results and the following relationships:
where in Eq. (17), known as the Hall–Patch relationship, ({sigma }_{y}), ({sigma }_{0}), (k), and ({d}_{g}) are the yield stress (MPa), friction stress (MPa), locking parameter (Mpa µm−1/2), and grain size (µm), respectively. There is no doubt that the grain size is different from the cell/dendrite size of the solidification structure, but for the additive manufactured samples, good compatibility has been observed in the Hall-Patch relationship when grain size (({d}_{g})) is replaced with cell/dendrite size (λ)24. Therefore, the cell/dendrite size was used instead of the grain size in this prediction. The constants ({sigma }_{0}) and (k) were also considered to be 194 MPa and 695 Mpa µm-1/2 for SS316L29 and 325 MPa and 750 Mpa µm−1/2 for IN71830, respectively. In Eq. (18), (HV) and (m) are Vickers hardness (kgf/mm2) and Mayer’s index, respectively, and (m) was considered to be 2.25 for both alloys24. Figure 17 illustrates the microhardness distribution along the cross-section of the multi-material structure by experimental measurement and numerical calculation. As shown, there is a fair correlation between the results obtained from the two methods, though the influence of other strengthening mechanisms (solid solution and secondary phase strengthening) which are not directly included as independent terms in Eq. (17), can be considered as the reason for the difference between the numerical and experimental results, especially in the IN718 section. A further explanation that, in the SS316L section, despite the expected hardness drop from layers 1–7 due to the increase in microstructure size, it is almost uniform. This can be due to equal competition between the two mechanisms of hardness reduction (microstructure coarsening) and hardness increase (ferrite phase reinforcement by decreasing the cooling rate) in this section with increasing the structure height. However, with the transition to the IN718 section, the hardness increases significantly due to higher yield strength of the matrix phase and the presence of the Laves intermetallic phase, and then, it decreases slightly with the coarsening of the microstructure in layers 8–14.
Microhardness variations along the cross-section of the multi-material structure.
In this research, with the aim of comprehensive understanding and the possibility of predicting different aspects of the materials paradigm in additive manufacturing of multi-materials, the printability and microstructure evolution of SS316L-IN718 multi-material fabricated by the directed energy deposition method were studied through numerical modeling and experimental analysis. The main results are as follows:
Printability analysis of the multi-material showed that, in general, distortion and composition change defects are more pronounced with increasing the number of layers due to heat accumulation. In contrast, lack of fusion is more likely to happen in the initial layers due to more efficient heat loss through the substrate.
Due to the difference in the thermophysical properties of the base materials, the IN718 section with a maximum thermal strain of 3.95 × 10−3 in the last layer is more sensitive to distortion, and on the other side, the SS316L section with vaporization of more than 0.9% of Mn element in the sixth layer and also the lack of fusion index close to 1 in the initial layers is more susceptible to composition change and lack of fusion.
Although with the progress of the deposition process, a coarser solidification structure is formed due to the reduction of cooling rate, it was shown experimentally and numerically that the occurrence of the eutectic reaction L → γ + Laves in the IN718 section causes this rule to be discriminated by a finer microstructure in layers 8–14, despite following the general trend.
Calculation of the ratio of temperature gradient ((G)) and solidification rate ((R)) in the build direction and matching it with the relevant microstructures showed that the cellular solidification of SS316L section can be separated from the dendritic solidification of IN718 section by decreasing the (G/R) ratio (increasing undercooling) to approximately 55 K s/mm2, besides the influence of increasing the concentration of alloying elements with low distribution coefficients. However, a very narrow planar solidification mode is also visible at the interface of adjacent layers due to the higher local gradient temperature.
The fraction of secondary phases (delta ferrite in SS316L and Laves in IN718) resulting from non-equilibrium solidification in the intercellular/dendritic regions increases almost linearly (with different slopes) due to the reduction of cooling rate in the build direction of the multi-material.
The prediction and measurement of hardness in the build direction similarly showed the highest hardness in the IN718 section (~ 260 HV0.3) due to higher yield strength of the matrix and the presence of the Laves intermetallic phase. Nevertheless, the hardness variations in each multi-material section with increasing number of layers, due to microstructure coarsening (hardness reduction factor) along with secondary phase reinforcement (hardness increase factor), has been mild and somewhat decreasing.
All data generated or analyzed during this study are included in this published article.
DebRoy, T. et al. Additive manufacturing of metallic components–process, structure and properties. Prog. Mater. Sci. 92, 112–224 (2018).
CAS  Article  Google Scholar 
Bandyopadhyay, A. & Heer, B. Additive manufacturing of multi-material structures. Mater. Sci. Eng. R. Rep. 129, 1–16 (2018).
Article  Google Scholar 
DebRoy, T. et al. Scientific, technological and economic issues in metal printing and their solutions. Nat. Mater. 18, 1026–1032 (2019).
ADS  CAS  Article  Google Scholar 
Ghanavati, R. & Naffakh-Moosavy, H. Additive manufacturing of functionally graded metallic materials: A review of experimental and numerical studies. J. Market. Res. 13, 1628–1664 (2021).
CAS  Google Scholar 
Feenstra, D. R. et al. Critical review of the state of the art in multi-material fabrication via directed energy deposition. Curr. Opin. Solid State Mater. Sci. 25, 100924 (2021).
ADS  Article  Google Scholar 
Rodriguez, J., Hoefer, K., Haelsig, A. & Mayr, P. Functionally graded SS 316L to Ni-based structures produced by 3D plasma metal deposition. Metals. 9, 620 (2019).
CAS  Article  Google Scholar 
Lin, X., Yue, T. M., Yang, H. O. & Huang, W. D. Laser rapid forming of SS316L/Rene88DT graded material. Mater. Sci. Eng. A 391, 325–336 (2005).
Article  Google Scholar 
Lin, X. & Yue, T. M. Phase formation and microstructure evolution in laser rapid forming of graded SS316L/Rene88DT alloy. Mater. Sci. Eng. A 402, 294–306 (2005).
Article  Google Scholar 
Shah, K. et al. Parametric study of development of Inconel-steel functionally graded materials by laser direct metal deposition. Mater. Des. 54, 531–538 (2014).
CAS  Article  Google Scholar 
Savitha, U. et al. Chemical analysis, structure and mechanical properties of discrete and compositionally graded SS316–IN625 dual materials. Mater. Sci. Eng. A 647, 344–352 (2015).
CAS  Article  Google Scholar 
Zhang, X., Chen, Y. & Liou, F. Fabrication of SS316L-IN625 functionally graded materials by powder-fed directed energy deposition. Sci. Technol. Weld. Joining 24, 504–516 (2019).
Article  Google Scholar 
Carroll, B. E. et al. Functionally graded material of 304L stainless steel and inconel 625 fabricated by directed energy deposition: Characterization and thermodynamic modeling. Acta Mater. 108, 46–54 (2016).
ADS  CAS  Article  Google Scholar 
Su, Y., Chen, B., Tan, C., Song, X. & Feng, J. Influence of composition gradient variation on the microstructure and mechanical properties of 316 L/Inconel718 functionally graded material fabricated by laser additive manufacturing. J. Mater. Process. Technol. 283, 116702 (2020).
CAS  Article  Google Scholar 
Kim, S. H. et al. Selective compositional range exclusion via directed energy deposition to produce a defect-free Inconel 718/SS 316L functionally graded material. Addit. Manuf. 47, 102288 (2021).
CAS  Google Scholar 
Manvatkar, V. D., Gokhale, A. A., Reddy, G. J., Savitha, U. & De, A. Investigation on laser engineered net shaping of multilayered structures in H13 tool steel. J. Laser Appl. 27, 032010 (2015).
ADS  Article  Google Scholar 
Goldak, J. A. & Akhlaghi, M. Computational Welding Mechanics (Springer Science & Business Media, 2006).
Google Scholar 
Davis, J. R. Stainless Steels (ASM International, 1994).
Google Scholar 
Davis, J. R. Nickel, Cobalt, and Their Alloys (ASM International, 2000).
Google Scholar 
De, A. & DebRoy, T. A smart model to estimate effective thermal conductivity and viscosity in the weld pool. J. Appl. Phys. 95, 5230–5240 (2004).
ADS  CAS  Article  Google Scholar 
Mukherjee, T., Zuback, J. S., De, A. & DebRoy, T. Printability of alloys for additive manufacturing. Sci. Rep. 6, 1–8 (2016).
Article  Google Scholar 
Lippold, J. C. Welding Metallurgy and Weldability (Wiley, 2014).
Google Scholar 
Mukherjee, T. & DebRoy, T. Printability of 316 stainless steel. Sci. Technol. Weld. Joining 24, 412–419 (2019).
CAS  Article  Google Scholar 
Zheng, B., Zhou, Y., Smugeresky, J. E., Schoenung, J. M. & Lavernia, E. J. Thermal behavior and microstructure evolution during laser deposition with laser-engineered net shaping: Part II. Experimental investigation and discussion. Metall. Mater. Trans. A. 39, 2237–2245 (2008).
Article  Google Scholar 
Manvatkar, V., De, A. & DebRoy, T. Heat transfer and material flow during laser assisted multi-layer additive manufacturing. J. Appl. Phys. 116, 124905 (2014).
ADS  Article  Google Scholar 
Flemings, M. C. Solidification. Metall. Mater. Trans. B. 5, 2121–2134 (1974).
ADS  CAS  Article  Google Scholar 
Zhang, C. H. et al. Multi-layer functional graded stainless steel fabricated by laser melting deposition. Vacuum 141, 181–187 (2017).
ADS  CAS  Article  Google Scholar 
Ghanavati, R., Naffakh-Moosavy, H. & Moradi, M. Additive manufacturing of thin-walled SS316L-IN718 functionally graded materials by direct laser metal deposition. J. Market. Res. 15, 2673–2685 (2021).
CAS  Google Scholar 
Kumara, C., Balachandramurthi, A. R., Goel, S., Hanning, F. & Moverare, J. Toward a better understanding of phase transformations in additive manufacturing of Alloy 718. Materialia. 13, 100862 (2020).
CAS  Article  Google Scholar 
Wang, Z., Palmer, T. A. & Beese, A. M. Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing. Acta Mater. 110, 226–235 (2016).
ADS  CAS  Article  Google Scholar 
Gallmeyer, T. G. et al. Knowledge of process-structure-property relationships to engineer better heat treatments for laser powder bed fusion additive manufactured Inconel 718. Addit. Manuf. 31, 100977 (2020).
CAS  Google Scholar 
Download references
The authors would like to appreciate the financial support of this research by the National Science Foundation of Iran (Grant no. 99011515).
Department of Materials Engineering, Tarbiat Modares University (TMU), PO Box 14115-143, Tehran, Iran
Reza Ghanavati & Homam Naffakh-Moosavy
Faculty of Arts, Science and Technology, University of Northampton, Northampton, NN1 5PH, UK
Mahmoud Moradi
Department of Mechanical Engineering, California State University, Los Angeles, CA, 90032, USA
Mohsen Eshraghi
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
R.G. wrote the main manuscript text and H.N.-M. supervised the research. All authors reviewed the manuscript.
Correspondence to Homam Naffakh-Moosavy.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Ghanavati, R., Naffakh-Moosavy, H., Moradi, M. et al. Printability and microstructure of directed energy deposited SS316l-IN718 multi-material: numerical modeling and experimental analysis. Sci Rep 12, 16600 (2022). https://doi.org/10.1038/s41598-022-21077-8
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-21077-8
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Scientific Reports (Sci Rep) ISSN 2045-2322 (online)
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

source

Absolute Label Services – Digital Production Manager (UK) – Music Business Worldwide

Digital Production Manager

Full-Time (UK) Hybrid working
Absolute Label Services, powered by Utopia, is looking for a Digital Production Manager with a passion for music and tech to join our growing team. A Utopia Music company, Absolute Label Services is one of the most established label services companies in the world.
It has a proven track record of powering successful campaigns and providing routes to market for a wide range of independent artists, managers and labels. The company’s diverse client base ranges from developing talent such as Jake Isaac, edbl and Au/Ra to household names including Deep Purple, Beverly Knight and McFly.
Our dedicated team is the backbone of our world-class service and we’re currently looking for the newest member of the Absolute family.
We are currently seeking an experienced Digital Production Manager to work in our Digital department and alongside various in-house departments to deliver first-class service to our eclectic roster of labels and artists.
Reporting to the Head of Digital, you will be responsible for ensuring release assets and metadata are accurate and complete while maintaining compliancy with our partners to ensure content is delivered to platforms as scheduled in accordance with all required standards.
With meticulous attention to detail, an ability to multi-task and impeccable organisational skills, you will be passionate about providing exceptional customer service and familiar with XML, DDEX and digital music supply chain operations,
The successful candidate will have a minimum of 3 years’ experience in a similar role and a passion for where music and tech intersect.
The closing date for applications is Monday the 24th of October.
Please email your CV (or equivalent) to [email protected] referencing the job title ‘Digital Production Manager’ in the subject line. You do not need to provide a cover letter. Shortlisted applicants will be invited to a videocall interview.
You’re welcome to apply to any of our roles regardless of your race, gender, neurodiversity, sexual orientation, religion, disability, or parental responsibility. We are open to making reasonable adjustments to both the job spec and interview process to be fully inclusive and you’re welcome to let us know about these at any point during the recruitment process or in your initial CV email.
This is full time role. Typical office hours are Monday to Thursday 09:30 – 18:00 and on Fridays we finish at 17:00.
Music Business Jobs is the most effective way for the global music industry to find the best candidates for their open positions.
In addition to being seen by over 300,000 monthly unique readers online, our listings are also emailed direct to more than 50,000 professional subscribers every week – across the US, UK, Europe, Asia-Pacific and beyond.
Click through below for details on how to submit a Music Business Jobs listing – and learn why our advertisers ‘strongly recommend’ us to their peers…

source

Salisbury University: A liberal arts education that is second to none – Study International News

In 2020 alone, the media and entertainment industry reeled in US$2 trillion across the globe and some US$500 billion in the US. Now that things are picking up for media markets, there are endless opportunities for aspiring artists to thrive, something that many higher education institutes are beginning to realise.
Nestled in “Maryland’s Coastal College Town,” however, lies a public university that has been helping students find their own voices through a wide range of excellent visual and performing arts programmes since 1989. Salisbury University’s Fulton School of Liberal Arts is a pioneer when it comes to providing an outstanding US liberal arts education. Outcomes prove this: Nine students earned the prestigious Fulbright Student Award for the 2022-23 academic year. Lecturer and sculpture technician Laura West was also awarded a Fulbright grant to conduct research at the West University of Timișoara.
Little wonder Salisbury was named one of the US’s best colleges by The Princeton Review — its strategic location, state-of-the-art facilities, diverse student body, award-winning and dedicated faculty members, and extensive offerings lead to promising graduates and stellar results. Class of 2020 music and theatre major Jay Copeland, for example, made the Top Seven on American Idol whereas six voice students from the Music Programme received awards or honours in the annual National Association of Teachers of Singing (NATS) Student Auditions.
At the Music, Theatre and Dance Department, students are discovering their personal artistry, Source: Salisbury University
How is this possible? For starters, the Music, Theatre and Dance Department fosters an environment that encourages innovative performances and designs so students can discover their personal artistry. They also have the chance to work one-on-one with faculty mentors such as Blake Harris, an assistant professor of the Theatre Programme. According to Harris, lecturers work with each student to determine where their talents and academic interests lie.
“Our course focuses on creating individualised experiences for students. We do not want to turn you into someone you are not; rather, we train you to live up to the fullest potential of the artist you can become,” says Harris. “One of our most exciting modules is Devising Theatre, a course in which students get to create a group-generated performance by the end of the term. The students are guided through a process of developing actions, texts, and characters that will result in an original and relevant performance performed at the end of the term.”
What’s unique about the Music, Theatre, and Dance programmes is that they all have specialised tracks (Traditional, Instrumental Performance, Music Technology, Vocal Performance, Teacher Certification, Design and Production, and Performance, Dance minor, Music minor, Music Production minor, and Theatre minor), so that students can focus on a niche.
The Art Department functions in a similar vein — the Art BA programme includes tracks in Art History, Two-dimensional Studio, Three-dimensional Studio, and Visual Communications whereas the Art BFA programme has tracks in Ceramics, Drawing, Graphic Design, Hot Glass, New Media, Painting, Photography, and Sculpture.
“All of the Studio Art classes involve an understanding and awareness of the world we live in,” said art professor Jinchul Kim, an award-winning painter himself. “Students are learning to apply the fundamental process of picture-making by exercising powers of visual perception in painting and drawing. Students demonstrate their confidence in media for their artistic expression.”
Salisbury students live up to the fullest potential of the artist they can become. Source: Salisbury University
Learning opportunities don’t just stop there — Salisbury students can gain first-hand experience that prepares them for the future, whether that is in graduate school or in their careers. Through intense studio experiences, student exhibitions, Career Connections, and talks by visiting professionals, arts and fine arts students go on to attend internationally recognised MA or MFA programmes around the world. Faculty say such opportunities help students develop their vision and identity.
Art BFA major  Aita can attest to this: “The professors we have right now are active artists. While working with them, we get to experience what life will be like out in the world. I was working with a faculty member for a year and did an internship, and was hired to work with them afterwards. Once the show came up, I was given the opportunity to fly out to Colorado Springs and help him install.”
For Music graduate   Todd, the programme made him feel like he had found a second family. He described the students and faculty members as “a group of people that can help you achieve what you really wish to do”.
He agrees with Alec. “These professors have had international careers as conductors, as soloists, as small ensemble members,” he says.
Indeed, the satisfactory student experience at Salisbury is what makes it a hotspot for budding artists. “If you have the motivation to seek out and pursue an undergraduate experience second to none, you can get it here at Salisbury University,” said Maarten Pereboom, Dean of the Fulton School of Liberal Arts. “You will have faculty here who support you.”
As they often say at Salisbury University, apply today to make tomorrow yours.
Follow Salisbury University on Facebook, Twitter, LinkedIn, Flickr, YouTube, and Instagram.

source

HURRICANE IAN: Businesses open and available – WGCU

United Way
Sunshine Ace Hardware
Community Cooperative
Fireservice
Global Roofing & Contracting
Lloyd Roofing
Florida Storm Windows
Raymond Building Supply

Health


Advocate Radiation Oncology
Avow Hospice
Elite DNA Behavioral Health
Healthcare Network
NAMI Collier County
SalusCare

Family & Child Services


Better Together
Boys & Girls Club of Collier County
Child Care of Southwest Florida
Family Initiative
Guadalupe Center

Restaurants


Fort Myers Brewing Company
Shoeless Joe’s Sports Café
Norman Love Confections:
The Library Pizza and Pub
Del Mar Naples  
Ocean Prime
Maverick Grille
Chicken Salad Chick
Professional Services
CRS Technology
Goldstein, Buckley, Cechman, Rice & Purtz, PA
Priority Marketing

Other Services


Carroll & Carroll
Conservancy of Southwest Florida’s von Arx Wildlife Hospital
Charity for Change
Comerica – Naples Banking Center
Cypress Plumbing
Edison National Bank
Elite Jets
Guadalupe Resale Shop
IMAG
Integrity Employee Leasing
Partners in Care
Pro-Tec Plumbing & Air
OFDC Commercial Interiors
Studio+
TwinCutz

source

Studio One 6: video track, collaboration, new effects, mixing controls; review roundup – CDM Create Digital Music – Create Digital Music


The latest in DAW news: PreSonus’ Studio One has added a bunch of features, including improved collaboration and video scoring and some fun new devices. Here’s what’s new and what folks are saying.
Now, if you are going to upgrade, what you really need is … this studio, with wall-sized display. Time to work on the studio in your hollowed-out volcano lair!
There’s a bunch of stuff in this feature, including some vaguely Apple Logic-like stuff: a Customization Editor for turning on and off features, project templates, and track templates. Arguably those do look like you they might actually be more useful in this implementation than Apple’s – the track presets also hook into collaboration, and project templates have a nicely-designed setup. Studio One is even taking on Logic’s notation features.
I’m going to go out on a limb, though, and guess these are the tools you’ll be most interested in.
Video Track lets you cut directly to picture, with basic editing of video, too – they recommend this for podcasts as well as scoring. You’ll need the Professional Edition.
PreSonus Sphere collaboration is improved with archiving, collaboration, and invites even for non-users.
And you get a bunch of new devices:
De-Esser for tackling sibilance in vocals and other high-frequency taming.
Vocoder with side-chain or internal carrier and a cute Music Easel-style patch matrix.
ProEQ 3 which – with dynamic mode has sort of morphed into a multiband dynamics processor.
Mixer Channels get two new features. First, I love this Mixer Channel Overview, which manages to put all your inserts, sends, and channel strip settings in one place without being quickly squashed (Logic) or clunky (Cubase) — apologies to our various friends in Hamburg. There’s also a right-click Fader Flip which lets you pop-up a particular bus right from the send on the channel fader – really clever.
This might be overkill in simpler mix settings, but for managing more complex sends and whatnot, it looks like a godsend.
Plus Alternative Panning Modes, updated browser favorites and folders, and a new start screen.
What, you don’t like my witty banter (or as some like to describe it “sprawling rambling partly-coherent prose)? Reading and all that? Here, have some videos, some of the sharpest YouTuber analysis:
Studio One 6 – what’s new
Mac and Windows, available as one-off purchase or subscription.

CDM is a home for people who make and play music and motion.

Get news and special deals from us in your inbox weekly:


Opt in to receive news and updates.

You have successfully joined our subscriber list.



Made by Create Digital Media, GmbH in Berlin

source

Fresno State alumnus turned music producer hopes to pave the way for other Valley kids – The Collegian – The Collegian

In 2019, a doodle of a flying character in a Fresno State classroom marked the beginning of Jacob Rivera’s work as a music producer under the name Pilotkid. 
Two years after Rivera’s graduation in 2020, he’s now stationed in Los Angeles producing songs for artists he once listened to in his free time, including the rapper Russ, who released the single “Yes Sir,” produced by Rivera last June. 
When promoting the single, Russ called Rivera “a young legend” on his Instagram.
But Rivera’s biggest goal isn’t another star-studded collaboration or an award – it’s to pave the way for kids from the Valley to pursue music the way he has.
“I hope to be the door to open up to other kids who didn’t know that this was a possibility,” he said.
Rivera’s passion for music began at a young age. By the time he was in middle school he’d developed an interest in the drums and guitar, taking lessons for basic chords and “YouTube-ing” the rest. 
He was a self-described band geek through high school, which landed him a scholarship to Fresno State. 
During high school he played trombone in a Dixieland Jazz band, the Reedley River Rats, under Sam Gipson’s mentorship. Rivera performed with the group for over two years, during which time Gipson said he could already tell Rivera was driven.
“He was definitely very involved in as much of the music as he could be at the school that we were offering. He was just a part of everything he could be,” Gipson said.
Rivera’s passion was already all-consuming before he stumbled on a YouTube video of J. Cole explaining the process behind production of his hit song “Power Trip.” Rivera bought everything he saw J. Cole use in the video and set to work becoming a music producer himself.
“All throughout my entire college career was me making music as much as possible, every waking moment,” Rivera said.
By the start of his fifth year at Fresno State as a psychology major, he was producing albums for himself and found that he had extra beats with nobody to give them to. He made a YouTube channel, and within a few months he was getting work.
When he graduated during the pandemic, he was making enough money producing music to quit his job and move to LA. 
As a music producer, Rivera said his main task is to “bring an idea to life.” But his second task puts his psychology degree to work.
“It’s kind of my job to understand what [musicians are] trying to say and get inside of their head. As soon as I meet them, I ask questions and try to understand where they’re coming from and put that out in the form of music,” he said.
Working that closely with musicians he’s admired and worked with has been one of Rivera’s favorite parts of his work. 
He noted the excitement of hearing artists he’d previously listened to over his own beats, as well as telling well-known musicians like Russ about his college town of Fresno, which he called “surreal.”
“I know this guy personally now. Like, this man knows about Fresno and where I’m from,” Rivera said.
Most importantly to Rivera, it was in LA that he found the community he’d been searching for.
“Having had no one to really play my music for back in the Valley, I found myself in this little bubble by myself. When I came out to [Los Angeles] it was like I got tossed into a giant lake,” he said.
Knowing what it was like to feel alone in his pursuit of music production in the Valley, Rivera hopes to open up the possibilities for other kids who have similar aspirations.
“I think I want to be that for anybody else who doesn’t know that this is possible. Because I didn’t know this was possible, I had to figure it out,” he said.
He’s finding early success in that goal, too. Already he said that a friend’s little brother, who previously knew nothing about music production, now hopes to be a music producer himself one day.
Rivera’s music can be listened to on Youtube, Beatstore, Spotify, Apple Music and SoundCloud.
The Collegian is the student-run newspaper serving the Fresno State community. It publishes online daily and in print on Tuesdays.
The Collegian has served the Fresno State community since 1922. It currently publishes every Tuesday when school is in session, and its website is updated continuously throughout the year. The Collegian is run by students, who write and edit all the stories, and take all the videos and photos. It is funded by advertisements and a student fee.
Views expressed in The Collegian do not necessarily reflect the views of the staff or university.
The Collegian
California State University, Fresno
5201 N. Maple Ave., M/S SA42
Fresno, CA 93740
News Line: (559) 278-5732
Business Line: (559) 278-5735
Business Fax: (559) 278-2679
E-mail: [email protected]

source

When a music director owns the production – SlippediscSlippedisc | The inside track on classical music and related cultures, by Norman Lebrecht – Slipped Disc

Alastair Macaulay
Ruth Leon recommends
Uncategorized
about
main
Editors Choice
Premium
Mahler
Album Of The Week
News
Daily Comfort Zone
Orchestras
Opera
Top Artist
Comment Of The Day
RIP
Share this article:
norman lebrecht
October 02, 2022
The Teatro Colon in Buenos Aires has appointed the British conductor Jan-Latham Koenig as its music director from January 2023.
This past week, the Colon staged performances of Weill’s Seven Deadly Sins and Bluebeard’s Castle in a production by the Koenig Ensemble Limited.
The UK-based company is chaired by the conductor, who is also the main shareholder.
On August 10, 2022, well ahead of the production, the Teatro Colón paid Koenig Ensemble Limited the sum of US$195,000 to a bank account in Hampstead.
Is that strictly regular? Not in Argentina, where few get paid on time.
Our documentation was gathered by dissident members of the Teatro Colon.
Previous post
Next post
This was a double-bill production of two short chamber operas (because they are that, with the only exception of the orchestra’s size). An entirely local production would have reached the same quality levels or even higher – since we didn’t have Rattle conducting, Sellars staging, and Pape and Denoke singing.
Even so, let’s accept a few solid foreign artists in the leading sections of the production, just for variety’s sake – so okey with a conductor, a director, the singing Anna, and Bluebeard. That would be four people.
We got 16 instead – and none of them is a star: Latham-Koenig (conductor), Hunter (director), Wyer (designer), Dunn (video), Knowles (lights), Yee (choreographer), Storm (conductor’s assistant), Allardyce (director’s assistant), Wake-Edwards (singing Anna), Gilbert (Brother 1), Zhuravskii (Brother 2), Sedgwick (Brother 3), Malaba (Mother), Rudd (dancing Anna), Szemerédy (Bluebeard) and Shaham (Judit).
Not even for Wagner’s Meistersinger under Reiner, Klemperer, Busch, Kleiber and Leitner the Colón imported such amount of artists for a production… and those were the golden years in which the house, the city and the country were rich!
Here even the smallest comprimario and the dancing Anna were from abroad, bought in the same closed “package” sold by the house’s new music director to the house itself! Everyone was paid in full with dollars, plus international plane tickets and de luxe hotel accommodation… with no need whatsoever, through an agency chaired by the conductor of the production and music director of the house… everything paid in advance – and in a country where half of the population is poor and Argentine artists have gone through two years of pandemics, unemployed by their own (entirely public funded) house.
Please, show a minimum of decency. Shame on you!
Vergogna! Questa é una cosa inaccettabile.
Nothing really surprising. In the Hollywood business, this kind of thing has worked since the glory days of Orson Welles’ Citizen Kane. Director, producer and leading role combined in one person.
No, not in a public institution, certainly not in a State-funded and Government-run opera house.
Wrong.Welles was the exception.and he sold most of his rights on Citizen Kane to RKO,who distributed,and edited the film.The studio system persisted well into the late 50s and early 60s.people like Welles,Chaplin,Hitchcock,and later Preminger and Wyler were the exception of the rule.And even they didn´t have the right of the final cut.
Once upon a time, in an orchestra a long long time ago, this was Koenig’s standard practice. Orchestra players, choir singers, soloists…Some (nasty) people even sugested that he should also bring the audiences from England, to achieve perfection. Once a colonialist, always a colonialist
” dissident” members of the Teatro Colon?
Why not call them partisans….
in spanish we can brand with “me dejaron afuera”
(“they left me out”)
Mario Lutz
I don’t see your point: facts are facts, and as far as I can see they are backed up by official documentation.
By the way, since you talk about people being “left out”: are you happily “in”, Mr. Lutz?
The information is clear and forceful. Outside or inside what are they? Many cases of corruption are heard in Argentina. I’m not surprised.
You gotta hand it to Jan! Nice work…
Did the man who sweeps the floor after the concert came from England too? Who wants to pay a local to sweep when you can pay for the best!
norman lebrecht
October 05, 2022
The conductor announced today that he will be…
norman lebrecht
October 05, 2022
A high-end oboe can cost $14,000, four times…
norman lebrecht
October 04, 2022
The Dutch violinist has cancelled next Wednesday’s limelight…
norman lebrecht
October 04, 2022
The German tide has turned decisively against the…
We are doing our best to ensure that Slipped Disc is free to all readers. However, like every other news site, we have costs to bear and are urging readers to help share them.
As a first step we encourage you to take membership at US$79/£59 a year, or $165/£125 for three years.
Membership benefits will include a daily digest of stories delivered to your email, and occasional exclusive offers from our partners.
Select your subscription length below and head to the checkout:
Session expired
Please log in again. The login page will open in a new tab. After logging in you can close it and return to this page.

source

PRESONUS RELEASES STUDIO ONE™ 6, COMPREHENSIVE UPGRADE TO AWARD-WINNING DAW, UNLOCKING CREATIVITY FOR COMMITTED PROFESSIONALS ACROSS GENRES – StreetInsider.com

FREE Breaking News Alerts from StreetInsider.com!
StreetInsider.com Top Tickers, 10/6/2022
Best-In-Class Music Production Software Adds Industry Firsts, Customizable Interface, Lyric Support, Optimized Mixing Tools, Global Video Track, Smart Templates, New Plugins, Collaboration Enhancements and More 
HOLLYWOOD, Calif., Sept. 29, 2022 /PRNewswire/ — PreSonus Audio Electronics, Inc. today announced the global launch of Studio One™ 6, the latest version of the company’s award-winning music production software for macOS and Windows. Studio One™ 6 is the most recent chapter in the evolution of one of the bestselling digital audio workstations in the world, featuring industry-leading innovations, mixing improvements and the most advanced user interface customization options available. Version 6 makes audio content creation fast and easy, with everything you need to record, produce, mix, master and perform in a single intuitive application. Studio One 6 is available for purchase as a perpetual one-time license, or as an annual or monthly subscription to PreSonus Sphere via PreSonus.com and participating dealers. In addition to the latest two versions of Studio One™ Professional, PreSonus Sphere™ members get access to expanded collaboration tools in Studio One™ and online, Community, exclusive educational content, all PreSonus software and add-ons giving the best value to creators and the ultimate Studio One™ experience. With additional landmark innovations in the works for future iterations, Studio One™ 6 is just the start of the rollout of a new and improved feature set to support recording professionals.
PRESONUS RELEASES STUDIO ONE™ 6, COMPREHENSIVE UPGRADE TO AWARD-WINNING DAW, UNLOCKING CREATIVITY FOR COMMITTED PROFESSIONALS ACROSS GENRES
“In this latest iteration, the team stayed focused on listening to loyal users’ needs, creating innovative solutions to boost productivity in the professional audio production space,” said Arnd Kaiser, General Manager, Software at PreSonus. “We want engineers, producers, recording musicians and creators around the world to feel supported and inspired to build their best work yet. Studio One™ has evolved over the past 12 years and is now an established major player in the audio production space known for unique features and a fast, intuitive workflow. We continue to push the boundaries of what’s possible in recording and are now the first digital audio workstation in the industry to feature end-to-end lyric support for both audio and MIDI, from songwriting to recording and live performance.”
“We are excited for the launch of Studio One 6 and are fully invested in supporting the continued expansion and adoption of Studio One as the total solution for professional and committed at-home creators,” said Evan Jones, CMO, FMIC. “The global adoption of digital creative and productivity tools continues to grow and expand across all forms of musical expression, in the hands of an even wider audience of creators, producers, mix engineers, and artists. Together with PreSonus hardware and Studio One™ we’re providing the total solution for professional and committed at-home creators, and we can’t wait to hear the music they’ll make.”
Studio One™ 6 offers major new features and enhancements to boost creativity for seasoned professionals; moreover, the redesigned and customizable user interface helps creators focus on the task at hand. Studio One™ 6 is available in both perpetual (priced at $399.95 USD for Professional) or as part of the PreSonus Sphere™ subscription, which gives members every upgrade for free. Going forward, PreSonus Sphere™ members ($14.95/month or $164.95 annual) will always have access to the current version of Studio One™ Professional as well as one version back, giving them the freedom to upgrade whenever it works best with their projects.
“From 2017 on, Studio One™ has been the official DAW here at Studio DMI, in every room, for every purpose,” said Luca Pretolesi, Grammy Nominated Mixing and Mastering Engineer at Studio DMI Las Vegas. “Every record I’ve worked on so far, from big album projects like Drake to dance records for Diplo, has been done in Studio One™. PreSonus Studio One™ 6 is out and it’s great. There are so many improvements and I think everyone at PreSonus read my mind. They elevated certain functionality and features that are very important for my workflow, especially the Channel Overview. Staying on one channel and being able to access everything on the channel is a key element for me. I love the additional function on the sidechain; it was already crazy before. The ProEQ3 is even better. The dynamic functionality and the solo make it the ultimate EQ in a plugin format.”
Studio One™ 6 introduces a long list of additional new features and enhancements, including improvements to the Console, the Browser, the Start Page and much more. In addition, the Studio One™ 6 Console is also packed with new features developed at the request of the loyal Studio One™ community. Fader Flip lets users control FX/Bus sends, sidechains and Cue Mix sends all from the main faders. Stereo channels now feature a choice between balance, dual or binaural panning as well as a new panner pop-up editor. The new Channel Overview provides a single, consolidated view of all channel parameters, including input controls, inserts, sends and Cue Mix sends for the selected channel that can be pinned to keep a critical eye on individual channels. Finally, Studio One™ 6 takes workflow efficiency to a new level with Track Presets, storing every aspect of a given track or channel for instant recall, even for multiple selected tracks/channels.
Watch the official launch video on Studio One™ 6 HERE. High-resolution product images can be found HERE. Full product descriptions and specifications can be found HERE.
For technical specs, additional information on new PreSonus products and to find a retail partner near you, visit www.presonus.com and www.fender.com. Join the conversation on social media by following @PreSonus.and @Fender.
ABOUT STUDIO ONE™ 6: The latest version of the PreSonus® award-winning, best-selling music production software for macOS and Windows, Studio One™ 6 makes creating fast and easy with everything you need to record, produce, mix, master and perform all in a single intuitive application. Version 6 adds a wealth of new features and enhancements, including a customizable interface that lets you focus on the task at hand, a new Global Lyrics Track and Global Video Track, deeper integration with PreSonus Sphere™ Workspaces, new and improved Native plug-ins and much more. Studio One™ 6 makes content creation easier for first-time artists and seasoned professionals alike.
Pricing is as follows:
PreSonus Audio Electronics Inc. is the leading designer and manufacturer of recording and live-sound hardware and software solutions that solve real-world problems for creatives of all levels. Founded in 1995 and headquartered in Baton Rouge, La., PreSonus designs innovative audio tools for musicians, content creators, producers and audio engineers, providing professional sound quality and features without sacrificing affordability. Today, PreSonus is an owned brand under Fender Musical Instruments Corporation (FMIC). While most guitar and bass players still plug into amplifiers, many also plug their instruments into interfaces, recording songs as well as using virtual amps and effects to create their sounds. With a shared passion for music and a commitment to innovation, FMIC and PreSonus are focused on delivering an ecosystem that seamlessly integrates hardware and software for an effortless end-to-end experience. For more information, visit www.presonus.com.
Since 1946, Fender has revolutionized music and culture as one of the world’s leading musical instrument manufacturers, marketers and distributors. Fender Musical Instruments Corporation (FMIC) — whose portfolio of owned and licensed brands includes Fender, Squier, Gretsch guitars, Jackson, EVH, Charvel, Bigsby and PreSonus — follows a player-centric approach to crafting the highest-quality instruments and digital experiences across genres. Since 2015, Fender’s digital arm has introduced a new ecosystem of products and interactive experiences to accompany players at every stage of their musical journey. This includes innovative apps and learning platforms designed to complement Fender guitars, amplifiers, effects pedals, accessories and pro-audio gear, and inspire players through an immersive musical experience. FMIC is dedicated to unlocking the power of musical expression for all players, from beginners to history-making legends. In 2021, Fender celebrated 75 years of giving artists “wings to fly,” carrying on the vision of its founder, Leo Fender, and connecting players through a shared love of music.
PreSonus, Studio One (word and logo) and PreSonus Sphere are trademarks of PreSonus Audio Electronics, Inc., and/or its affiliates, some of which are registered in the U.S. and other countries.
All other product and company names may be trademarks of their respective owners, and may be used herein under license. Use of them does not imply any affiliation with or endorsement by or of the respective owners.
PreSonus Audio Electronics
Cision View original content to download multimedia:https://www.prnewswire.com/news-releases/presonus-releases-studio-one-6-comprehensive-upgrade-to-award-winning-daw-unlocking-creativity-for-committed-professionals-across-genres-301636222.html
SOURCE PreSonus Audio Electronics; Fender Musical Instruments Corporation
Receive full access to all new and archived articles, unlimited portfolio tracking, e-mail alerts, custom newswires and RSS feeds – and more!

source

Audio Converter Software Market Size 2022 Industry Recent Developments and Technology, Size, Trends, Growth, a – openPR

Permanent link to this press release:

All 5 Releases

source

Donovan, Dempsey to broadcast World Cup in US for Fox – Bay News 9

Get the best experience and stay connected to your community with our Spectrum News app. Learn More
Continue in Browser
Get hyperlocal forecasts, radar and weather alerts.
Please enter a valid zipcode.
Save
LOS ANGELES (AP) — Landon Donovan is teaming with Clint Dempsey again at a World Cup.
The pair, who share the American record of 57 international goals, will work for Fox at this year’s tournament in Qatar. Donovan is paired with Ian Darke on one of five play-by-play teams. He joins Dempsey, hired last spring as a studio analyst.
Fox announced Tuesday that the shifted World Cup opener between Qatar and Ecuador on Nov. 20 at 11 a.m. EST will be televised on its FS1 cable network. The main Fox network has the “NFL Kickoff” pregame show at that time ahead of games that start at 1 p.m. EST. The main network had been scheduled to broadcast the original opener, Senegal vs. Netherlands, at 5 a.m. EST on Nov. 21, but FIFA decided in August to start a day earlier.
As a result, the main Fox network will televise 34 of the 64 matches, one fewer than the original broadcast schedule announced in April.
Commentators will call all matches from stadiums in Qatar. Four years ago in Russia, Fox called 33 matches onsite, including all but one during the knockout rounds.
Donovan and Dempsey starred for the U.S. at the 2006 and 2010 World Cups.
Donovan became an ESPN studio analyst when he was cut from the 2014 U.S. World Cup roster by coach Jurgen Klinsmann. Donovan was hired as a color commentator for Fox during the 2016 Copa América and a studio analyst during the 2017 and 2019 CONCACAF Gold Cups. He currently is manager of the second-tier San Diego Loyal.
Darke memorably called Donovan’s injury-time goal against Algeria that advanced the U.S. to the round of 16 at the 2010 World Cup. Darke works for ESPN on a non-exclusive basis, allowing him to broadcast for Fox during this World Cup, and he is BT Sports’ lead soccer commentator in Britain.
John Strong and former U.S. midfielder Stu Holden will be the lead crew, as they were when they called 17 matches for Fox at the 2018 tournament.
Jacqui Oatley, a Sky Sports broadcaster, will become the first woman to call play-by-play for a U.S. network at a men’s World Cup. She is paired with former England defender Warren Barton, who worked 10 games with Mark Followill in 2018.
Derek Rae is paired with former U.S. midfielder Aly Wagner. They called 10 games together from a Los Angeles studio during Fox’s 2018 coverage and three on-site in a late change in plans, two round of 16 games and a quarterfinal. Rae is ESPN’s lead Bundesliga commentator.
JP Dellacamera will work with former U.S. forward Cobi Jones, Dellacamera’s 10th consecutive men’s World Cup on television or radio to go along with six Women’s World Cups. Four years ago, Dellacamera was joined in Russia by former U.S. goalkeeper Tony Meola for 13 matches.
Fox used six crews four years ago: Glenn Davis and Cobi Jones broadcast seven games and Jorge Perez-Navarro and Mariano Trujillo worked four.
Retired referees Mark Clattenburg and Joe Machnik are rules analysts.
Alexi Lalas will be Fox’s lead studio analyst for his second straight World Cup after working for ESPN in that role during the 2006, 2010 and 2014 tournaments.
Dempsey is joined by Carli Lloyd, who scored three goals for the U.S. in the 2015 Women’s World Cup final; former U.S. midfielder Maurice Edu; and former England midfielder Eni Aluko and forward Kelly Smith. Former NFL wide receiver Chad Johnson is a contributing analyst,
Rob Stone hosts his second straight World Cup and Kate Abdo returns as “World Cup Tonight” host. Abdo hosts CBS’ soccer telecasts, joined by Dempsey and Edu.
Reporters include Jenny Taft, Rodolfo Landeros and Geoff Shreeves. Tom Rinaldi is a reporter and feature correspondent.
All matches will be streamed on the Fox Sports app.
Fox will be televising the second of three World Cups for which it bought U.S. English-language television rights. ESPN and ABC had U.S. English-language TV rights from 1994 through 2014.
U.S. Spanish-language television rights are held by NBCUniversal’s Telemundo.
___
More AP soccer: https://apnews.com/hub/soccer and https://twitter.com/AP_Sports
Copyright 2022 The Associated Press. All rights reserved. This material may not be published, broadcast, rewritten or redistributed without permission.

source

In second cipher-related leak, Imran and party bigwigs purportedly strategise 'foreign conspiracy' – DAWN.com

Just days after an audio recording was released, allegedly of PTI chairman Imran Khan and his former principal secretary Azam Khan, another one surfaced on Friday — supposedly a continuation of the conversation in the previous recording — featuring who are believed to be PTI leaders Asad Umar and Shah Mahmood Qureshi discussing the “foreign conspiracy” cipher with the former premier and ex-principal secretary.
The clip making rounds on social media purportedly features a conversation between Imran, Azam, Umar and Qureshi about a cipher that the PTI chief has for long presented as evidence of a “foreign conspiracy” to oust him from the top office.
A similar audio recording, of a supposed conversation between Imran and Azam discussing the cipher, had surfaced earlier this week as well.
Read more: Recent audio leaks signify that the state has means to know what all of us are doing
In the [latest] audio clip, a voice, believed to be Imran’s, is heard saying: “Shah Jee we have to hold a meeting tomorrow […] you and the three of us (Imran, Qureshi and Azam Khan) and the foreign secretary.
“In it [the meeting], we have to tell them to quietly write the minutes of the meeting […] Azam is saying that we should draft the minutes and make photocopies of it.”

Here, the second voice, believed to be of Azam, is heard asking, “this cipher arrived on 7th or 8th […] it came on 8th”.
Here, the person on the other end, purportedly Imran, is heard saying that the meeting was held on the 7th.
“We don’t have to name the Americans […] under no circumstances do we have to take the name. So on this issue please, the name of the country should not come out of anyone. This is very important for all of you.
“That which country the letter came from […] I don’t want to hear the name from anyone,” the person believed to be Imran says.
In turn, the voice, supposedly belonging to Umar, can be heard saying: “Are you saying letter deliberately? This is not [a] letter, it is the meeting’s transcript.”
In his reply, the man believed to be Imran says that both the letter and the transcript were “the same thing”.
“People wouldn’t have understood the transcript. You say [things] like this in your jalsa,” Imran allegedly says.
PTI leader Fawad Chaudhry did not disavow the contents of the audio but said that the purpose of such leaks was to divert attention from the acquittal of Maryam Nawaz in the Avenfield case.

“We took whatever caution was possible in diplomatic matters,” Chaudhry said in a tweet.
He said that the name of the country [US] was not revealed until the cabinet declassified the cipher. “The name, however, had to come to light when the cipher had been declassified.”
Another party leader, Shahbaz Gill, pointed out a flaw in the subtitle of the leaked audio, clarifying that Imran had reportedly asked a person at the other end to jot down minutes. “But the subtitle mentions that the minutes of our choice shall be written.”

Former state minister Farrukh Habib said the probe into cipher had now become the need of the hour, insisting that it was a reality and no Pakistani was willing to accept the intervention of a foreign power to effect regime change in the country.

The first audio leak, which surfaced on Wednesday, also purportedly featured Imran and Azam and had “part one” ominously mentioned.
In the audio clip, a voice, believed to be Imran’s, is heard saying: “We only have to play on this. We don’t have to name [any country]. We only have to play with this, that this date was [decided] before.
“The new thing that will emerge is that the letter …”

Here, the second voice, believed to be of Azam, is heard, suggesting holding a meeting on the cipher.
“See, if you recall, in that the ambassador has written in the end to [send] a demarche. Even if the demarche is not to be sent, as I have thought a lot about it at night — you said they raised it — I thought about how to cover all this.
“Let’s hold a meeting with Shah Mahmood Qureshi (who was the foreign minister in Imran’s government) and the foreign secretary. Shah Mahmood Qureshi will read out that letter and whatever he reads out will be converted into a copy. I will then make minutes [out of it and say] that the foreign secretary has prepared this.
“But its (cipher’s) analysis will have to be conducted here. We will carry out the analysis and convert it into minutes as we want so that it becomes [part of] the office record.”
He elaborates that the analysis would conclude that “it is a threat. It is called a threat in diplomatic language”.
The man, believed to Azam, adds that “minutes are in my hands … we will draft the minutes”.
Here, the person on the other end, purportedly Imran, is heard asking who would be called to the meeting. “Shah Mahmood, you, me and Sohail?”
Just these, the other person says.
“We will do it tomorrow,” the person believed to be Imran replies.
In turn, the voice, supposedly belonging to Azam, is heard explaining that following this plan, “things will become a part of the record.
“Consider that they are the consulate for the state. When he will read it out, I will easily copy it and it will be on record that this has happened.”
Moreover, he suggests that “you (supposedly Imran) call the foreign secretary so that it doesn’t remain political and becomes a part of the bureaucratic record”.
To this, the man believed to be Imran points out that an ambassador has written the cipher, implying that it should already be a part of the bureaucratic record since it has been written by an envoy.
“But we don’t have a copy of it. How did they release it?” the person on the other end replies.
What began as an alleged and potentially embarrassing audio leak seems to have turned into an all-out national security incident as a slew of audio recordings of conversations between key government figures — including Prime Minister Shehbaz Sharif, PML-N leader Maryam Nawaz and some members of the federal cabinet — were released over the weekend.
The content of the recordings appear to be informal conversations in the PM Office — as opposed to recorded phone conversations.
On Saturday, a recording of PM Shehbaz surfaced where he was discussing with an unidentified official the possibility of facilitating the import of Indian machinery for a power project that was a concern of Maryam Nawaz Sharif’s son-in-law, Raheel.
On Sunday, further recordings surfaced, which were shared on social media by several PTI leaders, concerning former finance minister Miftah Ismail and the resignations of PTI lawmakers from the National Assembly.
One clip purportedly features a conversation between PML-N Vice President Maryam and the premier about Miftah, wherein a voice thought to belong to the former says he “doesn’t know what he is doing” and wishes for the return of PML-N stalwart Ishaq Dar.
A second clip allegedly concerns a conversation between the prime minister, Defence Minister Khawaja Asif, Law Minister Azam Nazeer Tarar, Interior Minister Rana Sanaullah and Ayaz Sadiq about the resignations of PTI lawmakers from the National Assembly.
A third clip purportedly features a conversation between Maryam Nawaz and PM Shehbaz regarding the return of former army chief retired Gen Pervez Musharraf.
PM Shehbaz on Tuesday termed the surfacing of audio leaks a “very serious lapse” and announced that a high-level committee would be constituted to probe the matter.
Compunode.com Pvt. Ltd. (www.compunode.com).Designed for Dawn.
Copyright © 2022, Dawn
Scribe Publishing Platform

source

Captain Plugins 5 Review: Music Production and Songwriting Made Easy (Kind Of) – Magnetic Magazine

Captain Plugins make songwriting pretty damn simply (in a good way)
Mixed In Key recently released a new suite of plugins designed to make your time in the studio more effective.
The Captain 5 Bundle includes five unique plugins that help generate musical ideas easily by working together to develop sketches quickly. Using these tools, you can write chord progressions in Captain Chords which then help dictate the Captain Deep before moving on to Captain Melody to write an infectious earworm.
Some of the biggest artists in the world, the Zedds and Diplos, are using the plugins that Mixed In Key has designed. So let's find out how the rest of the plugs measure up.
Snag This Bundle Here
If you struggle with music theory, chord-generating tools can be one of the most powerful things to help your initial ideas get off the ground. This plugin will help you create complex and intriguing chord progressions all your own without having to rely on hacks such as MIDI files and more.
The plugin also comes with many preset progressions and rhythms that can instantly create awesome chords that you can further tweak on your own. You can even record your pattern and have Captain Chords adjust the notes to match the progression of your choice! Now that's awesome.
These chords create the framework of the song that the other plugins in the bundle, like Captain Deep, play off.
This plugin's primary job is to create bass lines underneath the chord progressions you've made.
And while I know that bass notes are supposed to be relatively rudimentary and straightforward to follow, this plugin's lack of the same functionality and customization levels as the other plugins is a slight disappointment.
There are four basic choices you can tell the plugin to make regarding playing off the chords' movement. It can directly mirror the root note of the chord progression, do opposite movement, countering the root note, minimally adjust melody, or stay on the root note.
To make this happen, Mixed In Key requires the plugin to connect to Captain Chords.
The final verdict on this one is that it has some incredible potential but needs some work before it becomes an essential part of my workflow. I imagine an update on this one is coming soon as it doesn't match the functionality of the rest of the suite.
Of all the plugins in this bundle, Captain Melody, by right, is the most badass. With all of its different tools and uses, it's the flagship tool.
The hardest part with this plugin is finding an initial riff you're happy with. Once you have that lacking, the bells and whistles included here do all the rest of the heavy lifting. You can match the rhythm of the initial riff, change minor notes to add ear candy or flourishes, and even have the plugin generate new ideas as the sections progress.
This plugin in the bundle is a serious powerhouse and is well worth the price of the entire bundle alone!
it even has a randomizer for when you've completely hit a wall and want an act of God to spark new inspiration for you. It's awe-inspiring.
This plugin helps you create rhythms and beats for your music. Much like the Deep plugin, this has a ton of potential that didn't measure up to the rest of the bundle.
There are a ton of presets in the library that you can manipulate and change, but not much on randomness and spontaneity that would be simple to include. Sure, these kits are production-ready. But I found myself growing tired of scrolling through them fairly quickly.
The saving grace is that this plugin can help you generate percussion fills almost instantly. This was a super clever idea that I was surprised to see included.
Captain Play works as a fast and easy sketch pad that turns your keyboard into a complex MIDI instrument.
It helps lock in scales, popular chord progressions, and more so that you can generate full song ideas without needing a MIDI chord or theoretical knowledge.
Once you have played an idea you are proud of, you can export the idea into your DAW with just a few clicks.
After playing around with this bundle for a couple of weeks, I will admit that I was pretty damn impressed by the couple of plugins I found myself returning to.
Where this bundle thrives is off generating complex melodies from the chord progression. So if the songwriting process is slowing you down, this plugin bundle might be the biggest game changer of your career.
While the bundle may need some updates to really get the most out of the plugins, I am sure that these are coming. So don't let my critique of Deep and Beats prevent you from taking full advantage of what the best elements here can offer.
That being said, there are alternatives to the Captain 5 Bundle if these are deal breaks for you. HookTheory offers a far more intuitive chord writing workflow than this does if you can put up with composing solely in your browser before exporting MIDI notes.
But the fact that you can take advantage of all of this directly in your DAW and for a one-time purchase instead of subscriptions makes this an easy investment to recommend.
Snag This Bundle Here
Managing Editor at Magnetic Magazine – Former Marketing Manager at the Hyperbits Masterclass – Writer, Content Strategist, Music Producer, and Record Label Manager 

source

LISTEN: Infamous Audio of King Charles and Queen Consort Camilla on Secret, Sex-Charged Phone Call Goes Viral – PopCrush

The infamous tape recording of a NSFW phone call between King Charles III and Queen Consort Camilla, known as Camillagate, has gone viral again after resurfacing following the passing of Queen Elizabeth II.
The audio is a recording of a bedtime phone call between Charles and Camilla that took place while Charles was still married to the late Princess Diana.
"I can't bear a Sunday night without you," Camilla says in the recording, to which Charles replies, "Oh God, I fill up your tank!"
"Yes, you do," Camilla responds.
"The trouble is I need you several times a week," Charles says.
"Mmm, so do I. I need you all the week. All the time," Camilla continues, teasing, "Oh, you're going to come back as a pair of knickers."
"Or, God forbid, a Tampax," Charles laughs.
Shared in a TikTok with over 1 million views as of publishing, the audio is captioned as "tampon-gate." Listen below:
"This is my first time hearing this and I am traumatized," one person commented on the TikTok.
"Hi how do I manually repress a memory?" another quipped.
Meanwhile, another user referred to Charles as "King Tampax III."
The call was recorded in December 1989. The audio was first leaked by People magazine in 1993. At the time, Charles was still married to Diana, while Camilla was married to Andrew Parker Bowles.
Charles was allegedly left "ashamed" after the leak of the tape. Diana called the adulterous audio recording "sick."
Allegedly, Charles' affair with Camilla began in 1986, and Diana even reportedly confronted Camilla about it in 1989. In fact, Charles and Diana's marriage was plagued by constant rumors of trouble. They separated in 1992 and she divorced him in 1996.
Charles and Camilla got married nearly a decade later, on April 8, 2005.

source

Sheryl Lee Ralph on Abbott Elementary, being ‘black famous’ and scolding Kimmel – The Guardian

The 65-year-old mega-talent has been criminally underappreciated until now – ‘Isn’t it such a blessing that I could remain relevant after all of these years?’
Floral arrangements have been piling up on Sheryl Lee Ralph’s Los Angeles doorstep for the past couple of weeks. “My house is now my own personal rainforest,” she jokes.
The congratulatory bundles haven’t stopped since Ralph grabbed this year’s Emmy for her supporting role in the mockumentary sitcom Abbott Elementary. “I am floating on cloud 999 ever since they said ‘Sheryl Lee Ralph’ from the Emmy stage,” she says.
After nearly five decades in the business, she was so shocked when her name was called that Quinta Brunson, Tyler James Williams and other Abbott castmates had to ease her out of her seat and guide her up to the Microsoft Theater stage. In an acceptance speech for the ages, she launched into song before declaring, “this is what believing looks like … this is what striving looks like. Don’t you ever, ever give up on you.”
The song she belted out was jazz vocalist Dianne Reeves’s Endangered Species, a suitable choice considering Ralph is the only the second-ever Black woman to take home the trophy in this category. After Ralph’s win Jackée Harry, another estimable peer, reflected on her own “lonely experience” 35 years ago of becoming the first Black woman to win a supporting comedy actor Emmy for her vixen role in the neighborhood sitcom 227 – a part NBC had originally wanted Ralph to play. “It’s come full circle. Congrats, Sheryl & welcome to the club,” Harry tweeted.
The popular refrain on Ralph’s prize is that it was long overdue, or a study in perseverance, as she mentioned in her acceptance speech. But even that doesn’t quite capture why this 65-year-old mega-talent had been so criminally underappreciated to this point. “But isn’t that good?” she says. “Isn’t it such a blessing that I could remain relevant after all of these years?”
It’s not as if Ralph was some diamond in the rough. By 1974, she had been named one of the top 10 college women in America by Glamour magazine and was crowned Miss Black Teen-age New York.
Sidney Poitier gave her her first on-screen break in the 1977 hangout film A Piece of the Action. Scroll her IMDb page, and you’ll see credits for soaps (Search for Tomorrow), sitcoms (Designing Women) and even animated flicks (Disney’s Oliver & Company). But it’s Abbott, in which Ralph steals scenes as uptight doyenne Barbara Howard, that cements her as a crossover star.

Ralph takes sport in guessing her fans’ ages based on which of her many credits they might know her from. Personally, I considered blurting out “Ray Donovan”, but couldn’t stop myself from sputtering about her turn as super stepmom Dee Mitchell on the 90s sitcom Moesha.
That sitcom, a vehicle for the R&B star Brandy and a staple of the 90s Black sitcom boom, has picked up new fans in the streaming era, too – not least Ralph’s young Abbott scene partners. “One day, we came back to work and this little boy looked at me and said, ‘Miss Ralph, I’ve been watching you my whole life,’” she says.
All of which is to say: Ralph has always stood out. Her Broadway performance in the original production of Dreamgirls earned a 1982 Tony nomination, after all. It’s just that in her chosen profession, the slog is always somehow longer for Black actors. Eddie Murphy and Whoopi Goldberg are the rare Black actors who were recognized as prodigies and set on an unbroken road to superstardom.
But most every other Black actor who wasn’t already a musician (Ice Cube) or a sports hero (Jim Brown) has to endure, has to survive. That, too, can be exhausting. “In the beginning, they used to say [of Black actors], ‘Just give them a comedy because [Black people] love to laugh,’” Ralph recalls. “‘The dramas … I don’t know. They’re kinda difficult.’ You would hear things like that that, when you say them back now, it’s hurtful.”
After A Piece of the Action, Ralph didn’t land her next film credit until Oliver & Company, which was released in 1988. That drought, she says, “really started me on TV and on stage”. During her Dreamgirls run Ralph fell into anorexia, so great was the pressure to keep thin.
Most heartbreaking of all, she and her castmates sold their stake in the franchise for a dollar. “We don’t participate in the greatness that is Dreamgirls,” she laments. This is the same production that legitimized Beyoncé as a film actor, won Jennifer Hudson an Oscar and is still drawing crowds. “A Chorus Line came about same as Dreamgirls,” Ralph says. “The cast came together for a class-action suit and got their money for what they put into the show. But we just didn’t do that. We signed away our rights when we were very young. That’s just the way that happened.”
Earlier this year, Ralph opened up to the Hollywood Reporter about the plight of being what she calls “Black famous”. In Jamaica, where Ralph split her formative years and has always maintained a loyal following since that first film credit, her Emmy win was both splashed on the front pages of national newspapers and much discussed on the morning shows.
In the US, notoriety has been far more elusive. She shared an anecdote about her experience working on the short-lived 2019 CBS sitcom Fam and being confronted on the first day by an executive producer who asked, without irony, “So tell me, what have you done?”
“I always knew that Black folks were aware of me and my work, but I always knew I had a certain amount of crossover appeal, too,” she says.
On the night of Abbott’s second season premiere last month, Ralph had a few friends over for a watch party, including one ex-Fam stage manager who had witnessed that producer size up Ralph. “Sheryl, look at you now,” the friend said.
For another friend that story always seemed like the height of privilege.
“What always fascinated him about that moment was that it was his responsibility to know who you are, no matter your color, to make sure his production has absolute success with these millions that are being spent,” Ralph says.
“Now when I look at success, I look at it through the lens of, ‘I know the next time I go on a new set, they will know exactly who I am.’”
On Abbott Elementary, show creator and executive producer Quinta Brunson plays a new teacher who unabashedly admires and looks to Ralph’s character for guidance. That’s not too far from reality. Ralph still remembers how awestruck Brunson was when she turned up on the set of A Black Lady Sketch Show in 2019, where Brunson was writing and co-starring at the time. “She just kept looking at me,” Ralph remembers. “Like, she was actually studying me.”
Soon after, Brunson offered her a part in the sitcom she wrote about a ragtag group of Philadelphia primary school teachers fighting hopelessly against the systemic failures in public education. But Ralph says Brunson felt bad about having to ask her to read the Miss Howard part for executives to seal the deal. Worse, Ralph didn’t think the character was especially meaty on the page. “I honestly thought I was going to be invisible,” Ralph says.
Not only did that not happen, but veteran teachers regularly tell her just how much her performance makes them feel seen. “People are like, ‘I’m living for Miss Howard,’” Ralph says. “I had no idea. Ugh, it just makes me feel so good.”

The show debuted to little fanfare last December, but eventually gained its audience and became the first ABC comedy to quadruple its rating after airing. Its pilot episode scored Brunson an Emmy for comedy writing. Like Ralph’s, her golden moment also went viral, albeit against her will. Late-night host Jimmy Kimmel thought it would be funny to double down a limp joke by lying on the floor next to Brunson while she delivered her acceptance speech. But no one laughed, and Ralph in particular was not amused. After the awards show she sought Kimmel out, and scolded him for his “disrespect”. A few days later he apologized to Brunson on his show for stealing her spotlight with his “dumb comedy bit”.
“I’m absolutely good with the resolution,” Ralph says now. “As long as Quinta is fine with it, I’m fine with it. But my initial reaction was my initial reaction! You know how mothers are.” For Moesha fans, it was a vintage Dee Mitchell moment.
Ralph’s belated recognition syncs up nicely with Hollywood’s changing attitudes toward young Black stars. Zendaya (Euphoria), Lizzo (Watch Out for the Big Grrrls) and Jerrod Carmichael (Rothaniel) were also big winners on Emmy night. “It’s interesting to be in an era now of such Black excellence and abundance, and for people to not look at you as a fluke any more,” Ralph says. “But to be looked at as the real deal, to be able to get these projects greenlit no matter what color the people are. It’s important.”
And she’s especially thrilled that she got to share her special night with Brunson – who, at 32, is just getting warmed up in the business. “Quinta can do so many things,” Ralph gushes. “Write. Produce. I’m sure there’s a bit of a director in her.”
Now at least there’s no more discounting the woman who helped set the stage for the current crop of Black prodigies in Hollywood. After Ralph’s Emmy win, Beyoncé, who starred in the 2006 theatrical production of Dreamgirls, sent a bouquet and card “to the original Dreamgirl”. Jennifer Hudson, who co-starred with Beyoncé in the film, had Ralph on her daytime show – where Ralph taught Hudson how to do the Dreamgirls sway. (“I can’t believe I got to have that moment with you,” Hudson shrieked.)
When we spoke, Ralph had yet to celebrate properly with the original Dreamgirls, who are still very much in the game. Jennifer Holliday has reprised her Tony-winning role as Effie White for a current Dreamgirls production in Atlanta. Loretta Devine, who won an Emmy in 2011 for a guest spot on Grey’s Anatomy, is still expanding her range on film and TV – most notably as the matriarch of the popular Netflix sitcom Family Reunion. It’s a testament to true resilience. But for Ralph at least, there was no other option. “This is what I love to do,” she says of performing. “And there was no way I was not going to do it.”
Given Ralph’s versatility, it’s hard not to wonder whether she’ll soon be hoarding every award in sight. Egoting is a real possibility. “You’re not the only person who’s been saying it,” she says. “You can win a Grammy many different ways – reading, for example.” An enterprising music producer could breathe new life into In the Evening, her 1984 pop single that remains a DJ favorite. “The work has been started to find the right projects.”
One of the offers Ralph has been mulling recently would put her back on a Broadway stage alongside the powerhouse actor-singer and Tony-winning phenom Audra McDonald. Now that Ralph is finally getting her flowers, it’s only right that she get to play the one part that has eluded her throughout her career: the shoo-in.
“And you know what’s interesting? The way I got it, people are standing, ‘God, the Emmys have never been so good until this moment,’” she says. “They’re saying that in the year that I was there.”

source

‹ Previous Next ›