Blog

Producer Jermaine Dupri on 30 Years of R&B Hits, From Usher to Dvsn – Variety

Variety Print Plus Subscriber
Variety Print Plus Subscriber
Variety Print Plus Subscriber
Variety Print Plus Subscriber
Variety Print Plus Subscriber

By Janee Bolden
A few weeks shy of Jermaine Dupri’s 50th birthday, the super-producer is deep into conversation with Variety about his long history of hits and some of the latest notches on his belt… or about as deep as he can be, with Usher repeatedly calling him to discuss the upcoming album they’re in the last stages of finishing, before Dupri finally tells him they’ll have to catch up the next day. Ironically, Dupri can’t talk to Usher right now because he’s busy talking about Usher — in particular, how their 2004 album “Confessions” became a blockbuster and altered the R&B landscape, whether or not it’s always celebrated by the culture at large as a major game-changer.
But there are contemporary accomplishments to discuss as well, like how Dupri is in the middle of a public uproar over his latest contribution to R&B, “If I Get Caught Cheating (That Don’t Mean I Don’t Love You),” from the Canadian duo Dvsn, comprised of singer Daniel Daley and producer Paul “Nineteen85” Jefferies. Immediately after the song was released, it ignited fiery debates about infidelity and toxicity on Twitter that have increased Dvsn’s profile tenfold practically overnight.

At press time, there are over two dozen cover versions of the supposedly pro-cheating song, including a number by prominent female artists, like Chloe Bailey and Baby Tate. Kandi Burruss and Tamika “Tiny” Harris got together to adapt it into a female answer song, “If U Get Caught.”
“Kandi was on the radio talking about how toxic this song is, and I had to remind her that I wrote a song for Xscape that’s more toxic than ‘If I Get Caught,’” Dupri says. “She didn’t even realize the lyrics in ‘My Little Secret’ are way more toxic.”
It’s impossible to ignore the irony of two members of Xscape, Dupri’s first SoSoDef act, taking part in a cultural moment sparked by another Dupri production. When Dupri signed Xscape in 1993, the wave of R&B girl groups that would eventually dominate the era had yet to break, but trusting his instincts paid off then, as it continues to three decades later.
Someone who witnessed those instincts in action early on was music mogul Scooter Braun, who got a boost in his career as a young protege of Dupri’s. “He’s a storyteller and he’s never gotten the credit he deserves,” Braun tells Variety. “People talk about Quincy Jones and all of these guys, and they should, but Jermaine deserves to be in the conversation with them and the other greats. If you look at the charts you will see he beat Quincy’s record for the most years with a No. 1 record on the Billboard chart but no one is talking about these things.”
Dupri looks back on how he put Xscape on the map as a female vocal group in the early ’90s as the first of many times he was able to prove he was not a one-trick pony.
“I was looking at Xscape like, ‘Yo, me starting over with this group is going to make me look crazy,’ like, ‘Damn, this dude just did a rap group that sold 8 million records’” — referring to the phenomenal rap duo Kris Kross — “‘and now he’s coming out with a singing group that can actually sing.’ I didn’t want Jermaine Dupri to be boxed in as a rap producer, I wanted to be across the board. So I was, like, if I put these girls out and they can really sing, they’ll pay attention to me as a guy who is more than 11- and 12-year-old kids rapping. I luckily wrote a song that became a hit record, which was ‘Just Kicking It…’ And once we got ‘Understanding,’ that song broke the barrier of people saying, ‘Oh these girls can really sing.’”

Dupri has been a successful music producer for 30 years now, topping the charts with No. 1 hits from not just Kris Kross, Xscape and Usher but Da Brat, Mariah Carey, Monica, Bow Wow, Janet Jackson and more. But what isn’t recognized enough is his undeniable influence on the current cultural climate.
Latto, who is arguably one of the top selling female rappers of this era, was handpicked by Dupri as the winner of the first season of his Lifetime competition show “The Rap Game.” Burruss is currently at the top of her career as a television star of both unscripted shows like “The Real Housewives of Atlanta” and acclaimed scripted ones like Showtime’s “The Chi,” and that’s without mentioning her strides in songwriting and television and theatrical production. The biggest meme of the year belongs to Usher, whose NPR “Tiny Desk” performance of “Confessions” launched millions of #WatchThis posts.  It’s also worth mentioning that Ari Lennox, without question one of the most talented R&B singers of our time, has Dupris to thank for her latest hit, “Pressure,” which happens to be Lennox’s first No. 1 hit at radio.
Asked how “Pressure” came about, Dupri recalls meeting up with Lennox in the studio, where she played him some samples.
“I went ‘OK, you on the sampling thing.’ So I started feeling like what I did with Xscape and Mariah, but at the same time keeping it youthful while I go in the sample mode — keep it earthy, which is her style. The ‘Pressure’ thing was a song created with the mindset of marketing, because when I found the sample I told her, ‘Listen, we should make a song called ‘Pressure,’ because that’s what all the girls on Instagram were saying. I told her, ‘Watch what happens.’ And it happened.”
Dupris is straightforward about how his production naturally integrates marketing into his songs. Instead of forcing artists to make TikToks and reels using their work, he’s already mentally putting the plan inside the music, and organically fans are following what the songs are saying.
“That’s your marketing plan,” Dupri says. “I’m doing this without thinking about it. It’s just my mindset of how I feel like things should go.”
It’s been nearly 30 years, but what Dupri is doing now is similar to how he masterminded the marketing behind Kris Kross when he launched the group to fame with their first single, “Jump.”
“If you look at ‘Jump,’ you got backwards jeans and all of that stuff inside the whole making of Kris Kross. So when you saw Kris Kross they had backwards jeans, the titles on their records were backwards, everything was crossed out. Even the [term] ‘crossed out’ is basically the definition of saying everything goes backwards. All of my artists, I try to do that without sitting around and having a whole marketing team with me.”
Now, with his latest release, Dvsn’s “If I Get Caught,” he’s made the group a topic of conversation everywhere you turn. It’s become so inescapable that it’s also brought glaring attention to the fact that while Dvsn is preparing to release its fifth album, much of the public is just now discovering that it’s a group — not just a solo singer.
“Music and records have a duty,” Jermaine says. “They have a purpose. I feel like, I didn’t know this song had this purpose, but it ends up having the purpose of breaking the barrier of people not knowing who they are.”
If you ask Dupri how he’s so good at making hits he will tell you, matter of factly: “Practice.” He’s spent 30 years in the studio nearly every single day, by his reckoning. And turning 50 doesn’t make him particularly introspective. “The only thing I’m thinking about is, when Quincy Jones turned 50 he made ‘Thriller.’ That’s the only thing that matters to me. I’m trying to figure out what’s going to be my ‘Thriller.’”
Dupri believes the deck has been stacked against him in some ways. He mentions a perceived east coast bias that many argue has ruled the music industry for decades. He believes being from Atlanta, and continuing to represent the city for pretty much his entire career, has resulted in his being at times overlooked and underestimated. He’s also always been his own boss; while this is something that some people might see as a strength, he views it as having to carry his own weight.
Of course Dupri isn’t the only 50-year-old music mogul still actively contributing to the culture. During the pandemic peak of Verzuz popularity, fans and critics alike tried to pit the SoSoDef founder against Sean “Diddy” Combs for a battle, but Dupri was adamantly against an online match.
“History shows that playing music on the internet for Verzuz, if the wifi doesn’t work, the music doesn’t sound right and people create their own idea from that point,” Dupri says. “I’m not getting ready to set myself up for that. Why? Because Puff’s music sounds good, my music might not happen to sound right. I’m not taking that chance. I gotta play my cards differently than everybody else because I feel like I’ve been dealt a different deck.

“The one thing that Jermaine Dupri has never had is a support system that supported my success,” he adds. 
He mentions how a number of his peers —Jay-Z, Irv Gotti, Ruff Ryders and others came up under Def Jam— had Lyor Cohen to champion their careers and successes. He points out that Diddy similarly had Clive Davis helping him build his empire. He’s got a legitimate point; in the music business a lot of, if not most, Black executives have been elevated thanks to more powerful white executives. Dupri further points out that the music industry has numerous examples of white execs who’ve inherited their status through nepotism. 
These assertions might lead most to wonder whether Dupri’s father, Michael Mauldin, was able to similarly guide his path.
“When it came to Kris Kross and the music side of this, me and my father almost put each other on at different times,” Dupri explains. “I think it took my dad a long time to digest this, but this is the truth of the matter. When I got Kris Kross my mindset was that I’m not a manager, so I went to my dad to manage the group while I produced the group – so this was still my plan.
“It’s never been Kris Kross brought to me by someone. I found them and I decide every play about them.  Same thing with Bow Wow. When Bow Wow came to me, my next move was for me to give him to my dad because I felt comfortable with that. And all the others – with Brat I did the same thing. I’ve never been the guy who had a Clive Davis speaking for me.”
The irony is that Dupri might be able to claim responsibility for the success of a top white executive, instead of the other way around. Enter Scooter Braun.
“I was about to turn 20 years old,” Braun says in a separate interview. “I was a sophomore in college and Jermaine hired me as the director of marketing, and then made me the VP of marketing within six months. For the next four years, I dropped out of college and became part of SoSoDef and worked for Jermaine. I was Jermaine’s go-to guy on all things marketing across the board and that’s how I became close with Usher and all of these people, because Jermaine was making ‘Confessions’ and I was one of the people in the studio. Jermaine was the first person to show me a world outside of what I knew and show me my potential in the music industry.”
Braun has since become one of the most powerful music executives in the business, thanks to his work with Justin Bieber, Ariana Grande, J Balvin and Demi Lovato, among others.
Braun shares a quick anecdote about one of his trips to Los Angeles with Dupri, when he tried unsuccessfully to persuade Dupri and Brian Michael Cox to leave the studio where they were working on “Confessions Pt. 1” to go to the club with him.
“Jermaine kicked me out of the studio because he said, ‘We have to finish this song,’ and I’m really glad he did,” Braun shares. “I was young. He showed me a world outside of what I knew — showed me what it could be and gave me the confidence to go into the music industry.”
The album Braun is referring to, Usher’s “Confessions,” is a project that Dupri reflects on with both pride and pain. During our conversation, at one point he mentions the album is diamond RIAA status, for 10 million in sales, but he is equally amazed that Rolling Stone left the project off its top 100 Greatest Albums list. (Not that his work lacks for accolades from the media across the board: He’s jubilant that his collaboration with Mariah Carey, “We Belong Together,” was named song of the decade by Billboard.)
“I feel like that affects me,” Dupri says of what he sees as the Rolling Stone snub. “All of that goes into that bucket. That’s why people are debating about Verzuz, because one of my biggest albums, people don’t actually give it up the way they would have for somebody else. Usher didn’t win album of the year at the Grammys. You make an album that big and people act like it’s not that big so for me I feel like that’s why I’m the most challenged. Nobody thinks that Usher album is that crazy but Black people.”
In just this week alone, Dupri is celebrating the 25th anniversary of Usher’s 7-times platinum “My Way” project; a 1998 single with Usher, “Nice & Slow,” was just RIAA certified 3-times platinum this month; the first single he produced for Mariah Carey, “Always Be My Baby,” went 5-times platinum earlier this year.
There’s still more to come. Besides the forthcoming Usher album, Dupris is currently in the studio with Nickelodeon star Young Dylan working on his EP. Next year he’ll celebrate the 30th anniversary of SoSoDef, and in just a few weeks he’ll turn 50. For all he’s already achieved, Jermaine Dupri appears more motivated than ever, whether to prove something to himself or those who might have taken his smashes for granted… or, better yet, to finally arrive at his own “Thriller.”

A Variety and iHeartRadio Podcast
The Business of Entertainment

source

Watch: The differences between a TFSA and RRSP – MoneySense

Advertisement
Investing
By   on September 22, 2022
Presented by
EQ Bank
By   on September 22, 2022
Deciding between putting your money into a TFSA or RRSP? Find out what the differences are with these two registered accounts.
Advertisement
A tax-free savings account (TFSA) is a registered account that holds investments and allows you to grow your money tax-free and withdraw it tax-free. That means you don’t have to report any income earned in the account on your personal tax returns. A registered retirement savings plan (RRSP) is also a registered account, but it works differently than a TFSA, in that you defer reporting the income earned in an RRSP until you withdraw the funds—likely when you’re retired and in a lower tax bracket than when you were working. But that’s not all. Watch to find out more.
Share this article Share on Facebook Share on Twitter Share on Linkedin Share on Reddit Share on Email
Your email address will not be published.



Advertisement
Crypto
Sponsored By
CoinSmart
Investing
Stats Canada lets air out of inflation, the loonie’s…
Investing
Presented by
EQ Bank
Crypto
The Ethereum platform has had a major upgrade, known…
Real Estate
Interested in buying a second property? Familiarize yourself with…
Crypto
Sponsored By
CoinSmart
GICs
Find the best GIC rates in Canada. Plus, everything…
loans
Presented By
Credit Canada
Real Estate
A cottage or other vacation property can provide a…
Ask a Planner
What are the options for investing as a non-resident…
MoneySense is a digital magazine and financial media website, featuring content produced by journalists and qualified financial professionals. MoneySense is owned by Ratehub Inc., but remains editorially independent. While our goal is to provide accurate and up-to-date financial content, we encourage readers to practice critical thinking and cross-reference information with their own sources—especially before making any financial decisions. While our editorial team does its best to ensure accuracy, details change and mistakes happen. If you read something you feel is incorrect or misleading, we would love to hear from you. MoneySense is not responsible for content on external sites that we may link to in articles. MoneySense aims to be transparent when we receive compensation for advertisements and links on our site (read our full advertising disclosure for more details). The content provided on our site is for information only; it is not meant to be relied on or used in lieu of advice from a professional. Advertisers/partners are not responsible for and do not influence any of the editorial content appearing on MoneySense.ca. Our Advertisers/partners are also not responsible for the accuracy of the information on our site. Be sure to review the provider’s terms and conditions for all products and services displayed on MoneySense.ca. Product information and details vary for Quebec. For complete and current information on any product, please visit the provider’s website.
© 2002-2022 Ratehub Inc. All rights reserved
© 2002-2022 Ratehub Inc. All rights reserved

source

City council adopts water system master plan, reviews capital projects – Paso Robles Daily News

Fire Station 3 under construction. View more status photos of capital projects in the staff report linked below.
– The Paso Robles City Council met Tuesday and received a status update on capital projects in the city. The council also held the first reading of an amendment to the Paso Robles Municipal Code allowing rates for water service fees to be established by resolution, rather than by ordinance, and adopted the 2020 Water System Master Plan, among other items.
Highlights from the meeting, as sent by the city, are as follows. The recording is available at www.prcity.com/youtube.
The city has returned to hybrid public meetings pursuant to AB 361, which allows for a deviation from the teleconference rules required by the Ralph M. Brown Act. Residents now have the option to attend the meeting in person or to participate remotely.
Council did the following:
 
The next regular council meeting is on Tuesday, Oct. 4, at 6:30 p.m., in person and via Livestream at www.prcity.com/youtube. Public comments can be made during the meeting in person or by calling (805) 865-PASO (7276) or provided prior to the meeting by emailing [email protected], after the agenda posts, and prior to noon the day of the meeting.
​
​
The news staff of the Paso Robles Daily News wrote or edited this story from local contributors and press releases. The news staff can be reached at [email protected].
#PasoRobles hands #Lompoc their first loss on the season with a clutch 34-33 win at home

@BearcatAthletic
Our wines have won multiple double gold as well as consistently receiving 90+ ratings. Taste for yourself and let Dracaena Wines Turn Your Moments into Great Memories! https://ift.tt/8tiXbAK #pasorobles

source

Audit of Utah bond agency cites need for master plan – Bond Buyer

The Utah Inland Port Authority should complete a master development plan before tapping proceeds from a 2021 bond issue, according to a limited review state audit released this week. 
The quasi-governmental entity issued $150 million of bonds in December to finance an intermodal transportation center in Salt Lake City.
The report by the Legislative Auditor General’s office said while UIPA released a multi-year strategic business plan in 2020, it needs to prioritize the creation of a master development plan with stated goals and purposes prior to any major expenditure of bond proceeds unless its board approves an exception. 
The unrated tax differential revenue bonds were sold by UIPA Crossroads Public Infrastructure District despite environmental protests and an ongoing lawsuit by Salt Lake City that raised constitutional concerns related to the authority’s use of tax increment financing. 
The Utah Supreme Court in late June affirmed the dismissal of the city’s challenges to certain zoning provisions in the Utah Inland Port Authority Act but ordered a supplemental briefing on challenges to the act’s tax provisions.
“UIPA has not spent any funds to date on infrastructure projects from the 2021 series bond and is working through the master development plan to identify highest and best use to maximize development and invest in infrastructure within the jurisdictional area,” UIPA Deputy Executive Director Jill Flygare said in a statement.
The audit said while UIPA “has the potential to deliver significant economic benefits to Utah,” it needs to improve control and governance in some areas of its operations. Auditors noted gaps in organizational structure that reduce internal controls, and the need for stronger procurement and contract management. 
UIPA’s board had asked the audit team to provide direction on potential risk areas. In its response to the audit, the agency said it has already taken “several significant steps towards ensuring compliance with the recommendations.”
The UIPA was created by the legislature in 2018 as an independent development authority focused on supply chain logistics.  A law enacted earlier this year formed a State Finance Review Commission with oversight of bond issues by the UIPA and other newer development agencies.
The SEC has charged Oppenheimer in a litigated action and settled with BNY Mellon, TD Securities and Jefferies for failing to comply with municipal bond disclosure requirements.
The conference returned to an in-person event for the first time since the pandemic.
Nearly all construction firms have job openings, and more than half said they’re seeing projects being scaled back, postponed or canceled.
Triple-A yields rose 11 to 15 basis points five years and in.
“We really have worked hard during this strong stretch here of economic performance over the last 18 months or so to really kind of address some of those lingering debts we inherited,” said Illinois Office of Management and Budget Director Alexis Sturm.
The mall operator want a downward reassessment of the property’s estimated value, a move that could reduce quarterly PILOT payments that back tax-exempt bonds.
Retail investors may be moving out of municipal bond mutual funds and into separately managed accounts, largely due to the headline shock of the massive outflows from the funds, participants say.
In a letter a letter to BlackRock CEO Larry Fink, Brad Lander said he was concerned the firm’s actions don’t align with its stated climate commitments.
One-year rates have risen 100 basis points, intermediate maturities have traded up about 25 basis points and long-term munis are nearly 50 basis points above June’s close.
Independent and authoritative analysis and perspective for the bond buying industry

source

Historical Society of Bay County Presents Guest Speaker Tim Hollis – WJHG

PANAMA CITY, Fla. (WJHG/WECP) – Calling all history buffs. The Historical Society of Bay County invites you to their next Guest Speaker Program featuring Tim Hollis. The event will take place this Monday at 7 p.m. in the Bay County Public Library.
Kenneth Reed, the Vice President of Historical Society of Bay County stopped by the studio to tell us all about the event. He explained that Tim Hollis is the author of many novels including “Lost Attractions of Florida’s Miracle Strip.”
Kenneth brought along three novels from his personal connection to share with viewers. He encourages everyone to come join this fact-filled night full of history.
To find out more about the Historical Society of Bay County and their upcoming events, visit their Facebook page here.
Copyright 2022 WJHG. All rights reserved.

source

M-Audio® Introduces M-Game®, Livestreaming Audio Interface and Software for Gaming and More – Business Wire

The new M-Game® RGB Dual, Solo, and Software products bring first-of-its-kind levels of performance, customization, and entertainment for gaming and content creation.

M-Game® RGB Dual is a dual PC USB streaming audio interface with customizable RGB LED lighting, sampler, and voice shaping and effects. (Photo: Business Wire)
M-Game® Solo is a single USB livestreaming audio interface with customizable LED lighting, sampler, and voice shaping and effects. (Photo: Business Wire)
CUMBERLAND, R.I.–()–M-Audio® today introduced M-Game®, livestreaming audio interfaces and software designed specifically for gaming and content creation. M-Game® provides premium quality streaming, elevated performance, and entertainment for any audience.
M-Audio’s® legendary contribution to music performance and audio production is distinguished by a history of sophisticated engineering with an emphasis on versatility and usability. Drawing on our expertise with audio interfaces, and in partnership with our gaming experts, we are proud to debut M-Game®.
Powered by M-Audio®, the new M-Game® livestreaming audio interfaces, RGB Dual and Solo, and M-Game® software provide an all-in-one simple solution that delivers unique and innovative features for seamless set-up and customization. Unlike other audio interfaces, M-Game® delivers first-of-its-kind dual PC USB connection and the ability to add images to effects and samples allowing for a seamless setup of a livestream.
Users can customize any stream content with 18 built-in samples and instant sample recording and editing. Use the creative voice effects to customize the stream to the topic of the moment. Customize the color and pattern of LEDs, and personalize sound with virtual mix controls for the stream, headphones, chat and more.
“We’re redefining the livestreaming and gaming experience by delivering unique ways to not only setup your stream, but customize and really entertain your audience using exciting and simple tools at your fingertips,” said Alex Souppa, executive vice president of engineering and Manufacturing of inMusic, the parent company of M-Audio.
M-Game® RGB Dual: Key Features
M-Game® RGB Dual is a dual PC USB streaming audio interface with customizable RGB LED lighting, sampler, and voice shaping and effects.
M-Game® Solo: Key Features
M-Game® Solo is a single USB livestreaming audio interface with customizable LED lighting, sampler, and voice shaping and effects.
M-Game® Software: Key Features
The included M-Game® software allows for in-depth creative control and customization of your stream.
The M-Game® products are compatible with Windows 10 or higher, and Mac OS X 10.15 and higher. For a full list of specs and information, please visit: https://m-game.com
Pricing and Availability:
M-GAME® RGB Dual – September 8, 2022
$299.99 MSRP USD. Pricing varies by country. M-game.com and Global Authorized Dealers
M-GAME® Solo – September 8, 2022
$199.99 MSRP USD. Pricing varies by country. M-game.com and Global Authorized Dealers
M-Game® Software – September 8, 2022
Free Download with purchase of M-Game® RGB Dual or Solo; M-game.com
About M-Game®
M-Audio’s® legendary contribution to music performance and audio production is distinguished by a history of sophisticated engineering with an emphasis on versatility and usability. Drawing on our expertise with audio interfaces we are proud to debut M-Game®, livestreaming audio interfaces and software designed specifically for gaming and content creation. M-Game® provides you with the ultimate audio interface/mixer for premium quality streaming, elevated performance, and maximum entertainment.
Press:
Stephanie Correia
[email protected]
Press:
Stephanie Correia
[email protected]

source

Hines Celebrates the Next Chapter in the Redevelopment of… – Hines

News & Views
Press Releases
(BOSTON) – Hines, the global real estate investment, development, and property manager, today celebrated the successful beginning of the highly anticipated expansion and improvement of the Governor Michael S. Dukakis Transportation Center at South Station. The project is notable for its significant private investment in the city’s transit hub, and the continuation of South Station’s history of being a regional transportation core and destination. Project work began in January 2020. Hines leadership was joined by Governor Charlie Baker, Mayor Michelle Wu, Senator Lydia Edwards, and Chairman and State Representative Aaron Michlewitz. Developed by Hines and designed by global placemaker Pelli Clarke & Partners, the 51-story, 1,020,000-square-foot building will redefine the Boston skyline.
“This future South Station is what was imagined all those years ago, when Boston had the foresight to think bigger at every step. This kind of partnership is the creative thinking that we need to turn our public transportation system around,” said U.S. Secretary of Labor, and former Boston Mayor, Martin J. Walsh.
“This transformative project will result in significant improvements to South Station and a better experience for the travelers who use it,” said Governor Charlie Baker. “Our administration appreciates the collaboration with Hines, the City of Boston, community members and other partners which made this project possible.”
“This transportation center will embody what we want people to feel about our city when they first set foot here and what the ethos of Boston is – a place that is welcoming, connected, and inspiring to all,” said Mayor Michelle Wu. “I want to thank everyone who has been putting so much work into the careful coordination, the safe work practices, and vision for what Boston can be and what our region can be.”
“This is a historic moment with a historic coalition. It only demonstrates that in Boston, we do big things. But we do the best when we do them together. This is not just a tower but a beacon of our future and our call to meet the moment,” said Senator Lydia Edwards.
“This project is going to bring together transportation and aesthetics in a transformative way, and we are excited for the future and where this is going,” said State Representative and Chairman of Ways & Means Aaron Michlewitz.
“The vision for this project pre-dates Hines’ involvement, and it’s incredible to see it come to fruition after many years of successful collaboration among the MBTA, MassDOT, the City of Boston, the BPDA, the Federal Railroad Administration, Amtrak and others who share our passion and aspirations for this transportation hub and mixed-use private development project,” said David Perry, Hines Senior Managing Director. “Hines is incredibly proud of its role in this important public-private collaboration that will result in critical, privately-funded transit improvements as well as environmentally-responsible premium Class A office space and new housing opportunities to the city’s core.”
Currently, the South Station train station and bus terminal are two separate buildings, making connections between them difficult and inconvenient. The completion of the South Station Transportation Center will create comfortable and convenient transfers between all modes of transit, with direct connections between the rail and bus terminals.
The new outdoor concourse area will increase in size by 67% for an improved experience for passengers and people passing through the station. The tracks and platforms will be covered and the outdoor concourse will be transformed into an architecturally significant gateway to the city. The new bus terminal will increase capacity by more than 50% and will provide more convenient connections to the train and subway. Importantly, Hines has committed to supporting local employment opportunities, including at least 50% of the total work hours benefitting Boston residents; at least 25% of the total work hours will benefit people of color; and at least 10% of the total work hours benefiting female workers. Construction is being privately funded and, along with creating a new public space at the train station concourse, it will also improve the streetscape along Atlantic Avenue with new sidewalks, granite curbs, streetlights, greenery and street furniture, further activating the area and resulting in a vibrant, safe and welcoming experience for all.
In addition to transit and station improvements, the development will deliver a state-of-the-art office and residential tower positioned directly above South Station. Anticipated for delivery in 2025, the first phase of the project will offer approximately 670,000 rentable square feet of Class A office and amenity space as well as approximately 166 luxury residential condominium units and more than 500 parking spaces.
The office component will feature 29,000 square feet, primarily column-free, floor plates with 13 feet floor-to-ceiling heights and unobstructed views of downtown Boston and Boston Harbor. The residential component of the tower will offer studio, one-, two- and three-bedroom residences along with penthouse duplex homes. Office tenants and residents will be provided with market-leading amenities such as a large park situated on top of the parking garage; conference center; fitness and wellness center,a restaurant and landscaped terrace with a swimming pool and dining and entertaining space for resident use on the 36th floor.
Strategically located at the nexus between Boston’s Central Business District and the rapidly growing Seaport District, the property has convenient access to Logan International Airport as well as the area’s primary highways, including Interstate 93 and the Massachusetts Turnpike.
The building is designed to achieve LEED Gold certification, WELL Gold certification, and to be one of the first BREEAM “Excellent” ratings in the U.S. BREEAM is the world’s leading science-based suite of validation and certification systems for a sustainable built environment.
About Hines
Hines is a privately owned global real estate investment firm founded in 1957 with a presence in 285 cities in 28 countries. Hines oversees investment assets under management totaling approximately $90.3 billion.[1] In addition, Hines provides third-party property-level services to 373 properties totaling 114.2 million square feet. Historically, Hines has developed, redeveloped or acquired approximately 1,530 properties, totaling over 511 million square feet. The firm currently has more than 198 developments underway around the world. With extensive experience in investments across the risk spectrum and all property types, and a foundational commitment to ESG, Hines is one of the largest and most respected real estate organizations in the world. Visit http://www.hines.com for more information.
¹Includes both the global Hines organization as well as RIA AUM as of December 31, 2021.

0 / 0
Prev
Next
George C. Lancaster
Senior Vice President
Corporate Communications
713 966 7676

Erica Campbell
Vice President
Global Public Relations
848 466 3658
[email protected]
845 Texas Avenue
Suite 3300
Houston, TX 77002
United States
1 713 621 8000
Contact Hines
5 Welbeck St.
London W1G 9YQ
United Kingdom
44 20 7292 1900

Suites 2801-02, One Exchange Square
8 Connaught Place
Central, Hong Kong, SAR
China

345 Hudson Street
12th Floor
New York, NY 10014
United States
1 212 230 2300

444 West Lake Street
Suite 2400
Chicago, IL 60606
United States
1 312 419 4900

383 17th Street NW, Suite 100
T3 West Midtown
Atlanta, GA 30363
United States
1 770 206 5300

845 Texas Avenue
Suite 3300
Houston, TX 77002
United States
1 713 237 5600

101 California Street
Suite 1000
San Francisco, CA 94111
United States
1 415 982 6200

Suites 2801-02, One Exchange Square
8 Connaught Place
Central, Hong Kong, SAR
China

One Horizon Center
12th Floor
Gurgaon 122002
India
91 124 480 2222

5 Welbeck St.
London W1G 9YQ
United Kingdom
44 20 7292 1900

The Peapes Building
Level 3, 285 George St
Sydney, NSW 2000
Australia
61 2 9232 3137

Av. das Nações Unidas, 12901
Torre Norte – 6 ° andar
São Paulo 04578-910
Brazil
55 11 5504 7600

81 Bay Street
Suite 3500
Toronto, ON M5J 0E7
Canada
416 595 1949

Suite 1000, One Museum Place
669 Xin Zha Road, Jing An District
Shanghai, PRC 200041
China
86 21 6087 2200

66 Avenue Charles de Gaulle
Neuilly-sur-Seine, IDF 92522
France
33 1 41 45 80 80

Hines Immobilien GmbH
Joachimsthaler Str. 1
10623 Berlin
Germany
49 30 726241 100

Mitropoleos 3
4th floor
Athens 10557
Greece
30 210 364 7895

One Horizon Center
12th Floor
Gurgaon, Haryana 122002
India
91 124 480 2222

Third Floor, Central Quay, Riverside IV,
Sir John Rogersons Quay
Dublin 2
Ireland
353 1 7999900

Via Broletto 35
Milan 20121
Italy
0039 02 8962921

[email protected]
Toranomon Hills Mori Tower 6F
1-23-1 Toranomon, Minato-ku
Tokyo 105-6306
Japan
81 3 4520 3501

35 F, John F. Kennedy
Luxembourg L-1855

352 264 337 1

Torre del Angel
Reforma 350
Mexico D.F. 06600
Mexico
52 55 52428809

Rokin 69D
Amsterdam 1012 KL
Netherlands
31 208 960 510

Forbindelsesvej 4
3rd Floor
2100 Copenhagen
Denmark
45 22 88 20 70

Torre B Piso 15
Torre de las Americas
Punta Pacifica, Panama City
Panama
507 028 20 7375

Prosta Street 68
Warsaw 00-838
Poland
48 22 351 2400

Paseo de la Castellana 110, 2º B
Madrid 28046
Spain
34 91 703 00 23

[email protected]
8F, D1, D Tower
17, Jong-ro 3-gil, Jongno-gu
Seoul 03155
Republic of Korea
82 2 6952 5275

5 Welbeck St.
London W1G 9YQ
United Kingdom
44 20 7292 1900

source

'I Wanna Dance With Somebody' trailer tracks Houston's rise to fame – Florida Courier

Mainly sunny to start, then a few afternoon clouds. High near 90F. Winds NE at 5 to 10 mph..
Clear skies. Low 72F. Winds ENE at 5 to 10 mph.
Updated: September 24, 2022 @ 6:10 am
British actress Naomi Ackie poses in the winner’s room during the BAFTA British Academy Film Awards ceremony at the Royal Albert Hall, in London, on March 13.
Whitney Houston

British actress Naomi Ackie poses in the winner’s room during the BAFTA British Academy Film Awards ceremony at the Royal Albert Hall, in London, on March 13.
Actor Naomi Ackie captures singer Whitney Houston’s rise to fame and ups and downs in the newly released trailer for the upcoming biopic “I Wanna Dance With Somebody.”
In the first footage, released on Thursday, Sept. 15, the “Master of None” actor takes viewers back to Houston’s breakthrough moment at the Sweetwaters club in Manhattan where music mogul Clive Davis (Stanley Tucci) had a front-row seat to her talents.
“There’s a boy/ I know/ He’s the one I dream of,” she sings in the trailer. Davis  previously told USA Today that the film features only Houston›s singing, not Ackie’s.
Houston’s song “How Will I Know” scores the trailer, which follows the excitement behind the pop diva’s first radio hit, her time in the studio and her upbringing as a singer in her church choir.
“My dream, sing what I want to sing. Be how I want to be,” Ackie says. “Reach as big an audience as I can.”
The upbeat hit continues as Ackie’s Houston goes from one crowded gig to one of the nation’s most public stages. Donning a white track suit and a matching headband, Ackie embodies Houston as she performs the national anthem at the 1991 Super Bowl in Tampa.
Whitney Houston
Later in the trailer, the singer is told that “your music isn’t Black enough.”
“Look, I don’t know how to sing Black, and I don’t know how to sing white either,” she responds. “I know how to sing.”
With that, the trailer plays Houston’s titular number, “I Wanna Dance With Somebody,” while teasing Houston’s wedding to Bobby Brown, even more fan-filled shows and more of Houston’s memorable Super Bowl performance.
“I might’ve just heard the greatest voice of her generation,” Tucci’s Davis says.
Written by Anthony McCarten (who penned the screenplay for the Oscar winner “Bohemian Rhapsody”), “I Wanna Dance with Somebody” also stars Ashton Sanders, Tamara Tunie, Nafessa Williams and Clarke Peters.
The first look at the Houston biopic, directed by “Harriet” filmmaker Kasi Lemmons, comes more than a decade after the pop legend died in February 2012 at the Beverly Hilton Hotel in Beverly Hills, California. She was 48.
A multiple Grammy winner, Houston was known for soaring hits including “Greatest Love of All,” “How Will I Know” and “I Will Always Love You,” the powerful ballad from her 1992 film “The Bodyguard,” in which she starred.
Houston, who broke music sales records, influenced several generations of singers including Mariah Carey, Christina Aguilera, Alicia Keys, Queen Latifah and Jennifer Hudson. In the years before her death, Houston became the subject of tabloid headlines and public scrutiny for her drug use and relationship with Brown.
Ackie’s credits include roles on TV shows such as “Master of None,” “Small Axe” and “The End of the F— World.” Her film work includes “Star Wars: The Rise of Skywalker,” “The Corrupted” and “Lady Macbeth.”
“I Wanna Dance With Somebody” arrives in theaters Dec. 21.
Your comment has been submitted.

Reported
There was a problem reporting this.
Log In
Keep it Clean. Please avoid obscene, vulgar, lewd, racist or sexually-oriented language.
PLEASE TURN OFF YOUR CAPS LOCK.
Don't Threaten. Threats of harming another person will not be tolerated.
Be Truthful. Don't knowingly lie about anyone or anything.
Be Nice. No racism, sexism or any sort of -ism that is degrading to another person.
Be Proactive. Use the 'Report' link on each comment to let us know of abusive posts.
Share with Us. We'd love to hear eyewitness accounts, the history behind an article.
Success! An email has been sent to with a link to confirm list signup.
Error! There was an error processing your request.
Have the latest local news delivered every week so you don’t miss out on updates.
Sorry, there are no recent results for popular videos.
Sorry, there are no recent results for popular commented articles.

source

Seun Kuti is Not Hopeful, He's Willing – kuaf.com

Seun Kuti is a legendary saxophonist and leading voice in the afrobeat music movement. He is joined by the band his father helped started, Egypt 80, at Format Festival on Saturday evening.

source

'Moulin Rouge' Is a Terrific Spectacle, and That May Be All It Wants to Be – SFist

In some ways, Baz Luhrmann’s exuberant, flashy 2001 film Moulin Rouge was ripe for adaptation for the stage. But as a pre-9/11, postmodern product of an era of experimentation with music in film, and as an ode to the genre chaos of Bollywood movies, it requires some ratcheting back to make sense as a Broadway musical.
That’s not to say that the musical, which just opened at the Orpheum in San Francisco in its first national tour, is in any way low-key or disappointingly stripped of Luhrmann’s glitz and pomp. Much of that delight and awe is intact in the stage show and at times even augmented by the immediacy of live performance. In place of spinning and tracking upskirt shots of can-can dancers, we have row upon row of chorus members bouncing this way and that across the stage, the flash of neon and an ever-unfolding dollhouse of a set that keeps revealing new and secret chambers, rain showers of glitter, and confetti canons. And, of course, there are live can-can dancers, too.
As Christian, the American in Paris who falls in with a group of bohemians and helps them write a show before falling in love with its star, Conor Ryan brings plenty of infectious energy and goofiness to the role. Much like Ewan McGregor in the film, Ryan gives off an air of youth and fearlessness about looking foolish, and it doesn’t hurt that he has a stellar singing voice.
The plot of the show remains essentially similar to the movie, with showgirl Satine (played here by Courtney Reed) accidentally seducing Christian when she’s meant to be using her courtesan skills to woo a wealthy duke who has the means to save the struggling nightclub. Satine and Christian fall for each other as they work to produce the show — the plot of which is a thinly veiled version of what they’re going through, with a wealthy thief attempting to possess Satine as his own. And it’s directed by their friend Henri Toulouse-Lautrec (played with great French gusto by Andre Ward, whom you may recognize from Pose).
As emcee and club owner Harold Zidler, Austin Durant provides the necessary showmanship and verve, leading this large ensemble through much of the nearly breathless medleys of pop songs, appearing here as anachronistic stage numbers from 1899.
The creative team behind Moulin Rouge! The Musical reimagines Luhrmann’s 2001 pastiche with a view toward pop hits of the most recent decade — with everything from Lorde’s “Royals” to Lady Gaga’s “Bad Romance” to Adele’s “Rolling in the Deep” making appearances in the score. A few key songs from the original, like Elton John’s “Your Song,” David Bowie’s “Nature Boy,” and “Lady Marmalade” also figure prominently.
The music, and in particular the ensemble numbers are all incredibly strong — this is a show that is meant to dazzle and it does. From the opening kick-lines to the closing, circus-y curtain call, this cast and this production does not disappoint.
As for the story arc and the romance between Christian and Satine, it seems to recede in ways that it couldn’t really in the movie — and Reed’s Satine is oddly subdued, especially in contrast to the whirling dervishes around her and the looseness of her dashing leading man.
As the Duke, understudy Adam J. Levy played the role well in the performance I saw, and he provides the necessary musical villain. But Luhrmann’s notion of blending musical, comedy, and tragedy in one, sweeping tale feels less like an experiment and more like standard fare in the stage version. Musicals are supposed to have all that emotionality that movies often lack, but knowing what’s coming in this storyline, the inevitable loss of Satine to consumption etc., the tragic piece of the plot almost feels tacked on — and soon we’re back to the can-canning.
The show could end up proving highly adaptable in revivals down the line — it almost doesn’t matter what pop songs you plug in to the medleys, so long as they’re about love or romance. But it will always require a set as intricate and gawdy as the one here by Derek McLane, and choreography as frenetic as Sonya Tayeh’s.
If only there was a way to cure that consumption and just get on with the show.
Moulin Rouge! The Musical plays through November 6. Find tickets here.
We have a description of the suspect who is still at large, in a Tuesday night random attack that has reportedly left a man with a “half detached ear” and facial scars “for life.”
Get the latest posts delivered right to your inbox
Jay C. Barmann is a fiction writer and web editor who's lived in San Francisco for 20+ years.
Stay up to date! Get all the latest & greatest posts delivered straight to your inbox

source

Bleachers, Carly Rae Jepson Embrace The '80s at Jacobs Pavilion – Cleveland Scene

By on Thu, Sep 22, 2022 at 11:14 am
Read Scene’s Original Review of David Bowie’s First Concert in America, 50 Years Ago Today in Cleveland
By Vince Grzegorek
While We Await Nighttown’s Return to Cleveland Heights, New Operator Red Restaurant Group Launches “Nighttown Nights” at Pinecrest
By Douglas Trattner
Subscribe now to get the latest news delivered right to your inbox.
Read Scene’s Original Review of David Bowie’s First Concert in America, 50 Years Ago Today in Cleveland
By Vince Grzegorek
Cleveland’s Angie Haze To Release New Album in October
By Jeff Niesel
DJ Duo SLANDER Comes to Agora on Heels of Full-Length Debut’s Release
By Jeff Niesel
Livewire: The Best Concerts to Catch in Cleveland Through Oct. 4, Including Nine Inch Nails, Post Malone and Dinosaur Jr.
By Jeff Niesel
Cleveland’s Angie Haze To Release New Album in October
By Jeff Niesel
Cleveland’s Brian Lisik & Hard Legs To Release Live Album Recorded at the Rialto
By Jeff Niesel
Akron’s Church of Starry Wisdom Returns with Second Album and New Lyric Video
By Jeff Niesel
Cleveland’s Blue Winter Releases Sophomore Effort
By Jeff Niesel
View more issues
Read our sister publications
737 Bolivar Road
Cleveland, OH 44115

source

Decontamination of water co-polluted by copper, toluene and tetrahydrofuran using lauric acid | Scientific Reports – Nature.com

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 15832 (2022)
Metrics details
Co-contamination by organic solvents (e.g., toluene and tetrahydrofuran) and metal ions (e.g., Cu2+) is common in industrial wastewater and in industrial sites. This manuscript describes the separation of THF from water in the absence of copper ions, as well as the treatment of water co-polluted with either THF and copper, or toluene and copper. Tetrahydrofuran (THF) and water are freely miscible in the absence of lauric acid. Lauric acid separates the two solvents, as demonstrated by proton nuclear magnetic resonance (1H NMR) and Attenuated Total Reflection-Fourier Transform Infrared Spectroscopy (ATR-FTIR). The purity of the water phase separated from 3:7 (v/v) THF:water mixtures using 1 M lauric acid is ≈87%v/v. Synchrotron small angle X-Ray scattering (SAXS) indicates that lauric acid forms reverse micelles in THF, which swell in the presence of water (to host water in their interior) and ultimately lead to two free phases: 1) THF-rich and 2) water-rich. Deprotonated lauric acid (laurate ions) also induces the migration of Cu2+ ions in either THF (following separation from water) or in toluene (immiscible in water), enabling their removal from water. Laurate ions and copper ions likely interact through physical interactions (e.g., electrostatic interactions) rather than chemical bonds, as shown by ATR-FTIR. Inductively coupled plasma—optical emission spectrometry (ICP-OES) demonstrates up to 60% removal of Cu2+ ions from water co-polluted by CuSO4 or CuCl2 and toluene. While lauric acid emulsifies water and toluene in the absence of copper ions, copper salts destabilize emulsions. This is beneficial, to avoid that copper ions are re-entrained in the water phase alongside with toluene, following their migration in the toluene phase. The effect of copper ions on emulsion stability is explained based on the decreased interfacial activity and compressional rigidity of interfacial films, probed using a Langmuir trough. In wastewater treatment, lauric acid (a powder) can be mixed directly in the polluted water. In the context of groundwater remediation, lauric acid can be solubilized in canola oil to enable its injection to treat aquifers co-polluted by organic solvents and Cu2+. In this application, injectable filters obtained by injecting cationic hydroxyethylcellulose (HEC +) would impede the flow of toluene and copper ions partitioned in it, protecting downstream receptors. Co-contaminants can be subsequently extracted upstream of the filters (using pumping wells), to enable their simultaneous removal from aquifers.
Industrial activities release water-soluble, toxic heavy metals in groundwater, including lead, chromium, arsenic, zinc, cadmium, mercury and copper1,2. Copper is used in fertilizers and pesticide sprays, building materials, and agricultural and municipal waste, causing high copper concentrations in groundwater1. Hydrocarbons are also widely used in industrial processes and they are amongst the most common groundwater pollutants3. THF is a groundwater and industrial wastewater contaminant, because it used to produce pharmaceutical and pesticide intermediates4,5. Heavy metals, hydrocarbons and water-miscible organic solvents (e.g., dioxane or THF) are often present as co-contaminants on industrial sites6,7,8,9,10,11.
Treatment of heavy metals includes electrokinetic remediation12,13,14,15,16, removal using nanoparticles17 and soil flushing with additives which facilitate the solubilization and extraction of heavy metals through pump and treat1. Pump and treat extracts pollutants using pumping wells, treats groundwater ex situ and finally reinjects it after treatment18. As an example, ethylenediaminetetraacetic acid (EDTA) has been used to remediate copper in conjunction with pump and treat19. Our previous study used sodium lauroyl lactylate (SLL) for the same purpose20. These approaches do not enable the simultaneous removal of heavy metals and co-contaminants such as miscible solvents, of which THF is an example.
Common remedial approaches to target hydrocarbon contamination include chemical methods (e.g., chemical degradation using Fenton’s reagents21,22, oxidizing emulsifiers23, slow release oxidizer rods24, oxidizing nanoparticles25, ferrate26 and ozone sparging27), phytoremediation for shallow contaminants28, microwave heating29, pump and treat30, surfactant flushing31,32 and surfactant enhanced oxidation33, bioremediation using bacteria34,35, smouldering36 and thermal treatment37. Electrokinetic remediation of hydrocarbons has also been proposed, for instance in conjunction with surfactants38,39. Hydrocarbons can migrate during their remediation, positing risks to downstream receptors40,41,42. This risk also exists for heavy metals.
Our previous research focused on immobilizing Cr(VI) during its reduction to less toxic Cr(III)43, and barriers can mitigate hydrocarbon migration during treatment44. Barriers can be non-reactive18 or reactive45,46,47,48,49,50. In our previous studies focusing on hydrocarbons we also developed semi-permeable filters that could be injected for facile installation51. These filters enabled water flow, while retaining hydrocarbons51. While useful to prevent hydrocarbon migration, these filters could not simultaneously retain heavy metals.
Organic solvents miscible in water can be removed from wastewater using biological treatment52,53,54, chemical methods (e.g., advanced oxidation processes55) or pervaporation56,57. Biological treatment requires that pollutant concentrations are below levels at which they are toxic to the bacteria. Advanced oxidation processes are useful but require potentially hazardous chemicals and pervaporation is energy intensive.
Moreover, separation between water and organic solvents can be achieved by enhancing the organic solvent hydrophobicity (i.e., strengthening the organic molecule network at the expense of water-solvent interactions). For instance, a study showed that temperature could be tuned to decrease the ionicity of the lidocaine-oleic acid phase in a mixture of water, lidocaine and oleic acid, thereby separating it into a water phase and a lidocaine-oleic acid phase58. It would be advantageous to achieve separation without temperature cycles. Previous studies separated water from water-miscible solvents using salts59,60, sugars61,62 and polyols63, and surfactants such as sodium lauroyl lactylate (SLL)64. These compounds hydrogen bond (H-bonds) with water, thereby hindering water-solvent interactions64,65,66,67,68,69. In these previous studies, copper ions were not separated from water alongside with THF.
Liquid–liquid extraction has been applied to other contaminants such as antibiotics, pesticides and hydrocarbons, to facilitate their detection through analytical methods70,71,72, but the simultaneous separation of THF and metal ions (e.g., copper) was not previously achieved in the context of water purification. Here, we use for the first time lauric acid to simultaneously separate THF from water and induce copper ion migration in the THF phase, at ambient temperature (e.g., 20 °C). The proposed approach has potential applications to treat wastewater, surface water or groundwater, for instance following its extraction from polluted aquifers through pump and treat.
Moreover, we use injectable filters in conjunction with lauric acid to simultaneously target heavy metal contamination (e.g., Cu2+) and hydrocarbons immiscible in water. Specifically, we inject lauric acid in canola oil in model polluted aquifers, to induce Cu2+ migration in toluene (used as model hydrocarbon), enabling its retention by injectable HEC + filters. Toluene and Cu2+ could then be removed more easily from groundwater, e.g., by pumping them in filter proximity, upstream of the filters. Lauric acid73 and oleic acid74 were previously used to extract Cu2+ from water, but their use was not combined with injectable barriers. Also, our previous research showed that the benign surfactant SLL also induced Cu2+ partitioning into hydrophobic solvents such as canola oil, used as liquid sorbent in the context of water purification20. However, in this case, the oil phase became solid and could not be pumped from the subsurface. Therefore, SLL was exclusively intended for ex situ water treatment following pump and treat20.
CuCl2·2H2O and CuSO4·5H2O (ACS grade), lauric acid (ACS grade), toluene (HPLC grade), NaOH (pellets, ACS grade) and cationic hydroxyethyl cellulose (HEC +) were purchased from Sigma Aldrich (Canada). Canola oil (Selection brand) was purchased from a local market. THF (Caledon Laboratories Ltd, ACS grade), dioxane and isopropanol (Fisher Scientific Canada, ACS grade) were purchased from Fisher Scientific (Canada). Sand (EMD Millipore, Canada) was purchased from VWR. Deionised (DI) water was used in all experiments.
Bottle tests were conducted in glass vials, to investigate separation between THF and water, using 30%, 50% and 70% THF relative to water (v/v) and lauric acid concentrations ranging from 0.2 to 1 M, at pH = 2, 6.5 and 13. Equation (1) was used to estimate the difference between the volume of water added to the mixture (Vwater,used) and the volume of the water-rich bottom phase separated using lauric acid (Vwater,measured)
In the “Results and discussion” section this difference is referred to as deviation.
Bottle tests were also conducted to assess the partitioning of Cu2+ ions between the water and oil phases, and to study emulsification between toluene and water. Bottle tests were conducted by mixing first 5 mL of 30 M aqueous CuCl2 or CuSO4 solutions, 1 mL of 0.23 M lauric in canola oil solutions and either 1 mL or 4 mL of toluene. Afterwards, 10 mM NaOH (relative to the water phase) were added, and vials were agitated by hand for 30 s, before equilibrating them on a bench. Experiments were also conducted with pure water (without copper salts), using 1 mL of 0.23 M lauric in canola oil solutions and 1 mL of toluene, without NaOH or with 10 mM NaOH. Finally, additional bottle tests were conducted using 30 mM CuCl2 or CuSO4 solutions, toluene, and lauric acid alone, at pH = 13. The volume ratio of the aqueous phase to the toluene phase was four parts of water and one of toluene. All bottle tests were done in duplicate. Duplicates closely resembled each other.
Static interfacial tension measurements were conducted using a Sigma force tensiometer (Biolin Scientific, USA) and a platinum du Noüy ring (having a 2 cm diameter), using four types of samples, the composition of which is summarized in Table 1. The water and oil phases were mixed (1:1.2 water:oil, v/v) and allowed to separate in a separatory funnel for 24 h. They were then collected separately and carefully transferred in a glass cup with the aid of a pipette, to measure interfacial tension.
The surface tension provided in the “Results and discussion” section was estimated using (2):
where F is the maximum force measured when pulling the du Noüy ring outside of the water phase (i.e., the force required to break the lamella), R is the average radius of the Du Nuoy ring used and f is the Huh and Mason correction factor calculated as f = R/r (R = radius of the du Noüy ring and r = radius of the wire). All measurements were conducted in triplicate, to estimate the low standard deviation reported in the “Results and discussion” section.
Compression isotherms were measured at the oil–water interface using a Kibron Microtrough G1 Langmuir–Blodgett trough (Kibron, Sweden), controlled using KBN LayerXPro software (Kibron, Sweden). The water and oil phases are as described for samples 3 and 4 used for static interfacial tension measurements (Table 1, “Static interfacial tension measurement”). Samples were prepared in a separatory funnel, agitated and allowed to separate overnight. The water and oil phases were then collected separately, and carefully transferred into the lower and upper compartment of the Langmuir trough, respectively (with the aid of a pipette). After transferring the top and bottom phases, interfacially active species were allowed to adsorb at the interface for 10 min, before being compressed from 16,500 to 1650 mm2, using mobile barriers moving at a speed of 20 mm/min. After the first compression the barriers were rapidly expanded (at a speed of 140 mm/min) and films were immediately recompressed at 20 mm/min. The pressure was monitored using a Wilhelmy plate during each compression. Measurements were conducted in duplicate and measured curves closely resembled each other.
ATR-FTIR measurments were conducted to investigate potential interactions between lauric acid and Cu2+ ions. In these measurments, the samples used were prepared as described in “Bottle tests”. Specifically, we mixed first 5 mL of 30 M aqueous CuCl2 or CuSO4 solutions, 1 mL of 0.23 M lauric acid in canola oil solutions and 1 mL of toluene. Afterwards, 10 mM NaOH (relative to the water phase) were added, and vials were agitated by hand for 30 s, before allowing to settle on the bench. Experiments were also conducted without copper salts, using 1 mL of 0.23 M lauric in canola oil solutions and 1 mL of toluene, with 10 mM NaOH. Only the oil phase was analyzed, after 24 h equilibration. Additionally, ATR-FTIR was used to analyze samples prepared using 3:7 THF:water mixtures (v/v), using either water or 0.03 M CuCl2 or CuSO4 aqueous solutions. Absorbance spectra were collected using an ATR-FTIR spectrometer (Thermoscientific Nicolet Summit FTIR spectrometer with an Everest ATR), with an accompanying IR solution software. Due to the volatility of THF, each spectrum is the average of only 10 scans, with a resolution of 4 cm−1, in the wavenumber range of 400–4000 cm−1. Measurements were repeated at least four times per sample to account for the low scan count.
The absorbance peak associated with the OH stretch (H-bonding) of 3:7 v/v THF:water mixtures (pH ≈ 6.5 and pH ≈ 3) separated with 1 M lauric acid was deconvolved using a coarse-grain approach developed by us, as described in our previous manuscripts75,76. Briefly, normalized experimental data [0–1] in the range 2500–4000 cm−1 were fitted to a sum of two Gaussians by nonlinear regression using Graphpad Prism 9.2.0 (Eq. 3). This software uses the Levenberg and Marquardt algorithm77,78. We excluded the C–H stretching intensities in the range 2650–3000 cm−179, to improve the stability of the fit considerably and remove non-water OH contributions from the analysis.
We did not use any weighting for a maximum of 1000 iterations with medium convergence criteria. The three replicate Y values collected from three independent spectra were considered an individual point. All parameters were constrained to be greater than zero, and symmetrical confidence intervals and standard errors were calculated. All r2 values for the fits were greater than 0.9989.
Our approach was based on the simulations of water structure reported by Lenz and Ojamäe (2006)80. These authors partitioned the vibrational spectrum into contributions from different molecules according to their coordination properties, e.g., double H-bond (DD) or single H-bond (SD) donors. In our coarse-grained approach, shifts to higher wavenumbers (blueshifts) would indicate an enhancement in the structure of water.
All other spectral regions were analyzed using Omnic 9 (Thermo Fisher Scientific). Spectra were baseline corrected using independent spline baselines. Peak areas were determined either using Omnic 9 (for entire regions) or using Peakfit v4.12 (Seasolve) for individual peaks.
An optical VHX-5000 digital microscope (Keyence Corporation, Canada) was used to image samples described in “Bottle tests”. Each type of sample was imaged at least 10 times, to ensure that images were representative of the real sample characteristics.
Injectable filters were obtained as described elsewhere51,81. Briefly, a glass graduated cylinder having a 14 mm diameter was perforated at the bottom and filled with sand for a total volume of 5 mL, to mimic an aquifer. Water (20 mL) was flushed through the cylinder before injecting 1 mL of 0.1% wt HEC + solutions in water, followed by rinsing with excess water (60 mL). We subsequently injected in the cylinder co-contaminant mixtures of copper salts and toluene (samples 3 and 4 described in Table 1, “Static interfacial tension measurement”). Note that samples filtered through injectable filters were not allowed to settle overnight. The eluent was collected from the bottom of the cylinder and analyzed using ICP-OES (as described in “ICP-OES”), to assess copper concentrations in the water phase. Experiments were conducted in duplicate.
ICP-OES tests were conducted in triplicate using a PerkinElmer 5300 DV instrument, to quantitate the removal of copper ions from CuCl2 and CuSO4 aqueous solutions, using lauric acid. The summary of the samples analyzed is provided in Table 2. Bottle test samples were allowed to settle overnight, before collecting the water phase. The eluent from flow experiments described in “Flow experiments through injectable filters” was not allowed to settle overnight (i.e., samples were filtered immediately after mixing and the eluent was immediately collected). Each measurement was conducted in triplicate.
SAXS experiments were carried out at the Canadian Light Source Synchrotron (CLS) on the Brockhouse Diffraction Sector Undulator Beamline (BXDS-IVU)82, to identify the self-assembly of lauric acid (500 g/L) into crystal structures into pure THF and in THF-water mixtures. Samples were prepared using water at circum-neutral and acidic pH (pH = 2) and with different THF-water ratios (90–95% THF relative to water, v/v). Samples were pipetted and sealed in a Kapton tubing (Polyamide 0.0575″ ID × 0.0615″ OD) with wax to prevent solvent evaporation during data collection. SAXS data was collected with a Rayonix MX300HE detector (8192 × 8192 pixels) with 2 × 2 binning (4096 × 4096 pixel) for an effective pixel size of 73.242 µm with background stability mode ON. SAXS patterns were collected with a photon energy of 12.18 keV and sample-to-detector distance of ~ 233 cm. SAXS patterns were collected in transmission geometry with a 10 s dwell time. Patterns were processed with GSASII (Argonne National Laboratory (C), 2010) This product includes software developed by the UChicago Argonne, LLC)83,84. SAXS data was calibrated with silver behenate (AgBeh) and instrument parameters such as sample-to-detector distances, detector tilt, beam centre, were refined as described elsewhere83. SAXS patterns were integrated from q = 0.012 to q = 0.637 Å−1. Measurements were duplicated for each sample.
The scattering intensity was normalized [0,1] and fitted by nonlinear regression with Graphpad Prism 9.4.0 (Graphpad software, San Diego, California). Prism uses the Levenberg and Marquardt algorithm for non linear regression77,78. We fitted three different models to the data: Gaussian, Teubner and Strey, and Ornstein–Zernike.
The Gaussian model is given by Eq. (4).
where I(q) is the scattering intensity (expressed as a function of the scattering vector q), A is the amplitude (A = 1 in this case, since the data were normalized), σ is the standard deviation, and μ is the mean.
The Teubner and Strey model85, shown in Eq. (5), was fitted to the normalized scattering intensity vs. q data.
where C is a proportionality constant, set to 1 in our treatment due to data normalization, and a, c1 and c2 are fitting parameters, which were used to determine the periodicity d and the correlation length ξ, as shown in Eqs. (6)–(7).
The Ornstein–Zernike model was fitted to normalized scattering intensity vs. q data using Eq. (8).
1H NMR was used to analyze the purity of the water-rich phase separated from samples prepared with 0.125 M or 1 M lauric acid and mixtures of 7:3 water:THF (v/v). Samples were transferred directly into 5 mm NMR tubes without the addition of any deuterated solvent. NMR spectra were collected on a Bruker AVANCE NEO 300 MHz spectrometer equipped with a 5 mm BBFO probe. The sample temperature was regulated at 298 ± 1 K. Quantitative spectra were collected with the field frequency lock turned off, using a single scan with a relaxation delay of 30 s and an acquisition time of 5.6 s. Spectra were processed with 0.3 Hz line broadening and polynomial baseline correction.
Under quantitative NMR conditions, the integral of an NMR peak is proportional to the number of protons contributing to the peak (e.g., two for H2O and four for THF). Thus, in a two-component THF-water system, the mole fraction of one component (e.g., water in the water-rich phase) is given by Eq. (9)
where ({I}_{water}) and ({I}_{S}) are the NMR peak integrals of water and either THF, respectively. Note that the integration limits for the organic solvents encompass both the main peak and the 13C satellite peaks.
The above equation is only true for a two-component system. While the NMR spectra did reveal the presence of lauric acid in the sample, the mole fraction of lauric acid was less than 0.0003 in the water-rich fraction of all samples. As such, the water-rich phase of all samples is effectively a two-component system for the purpose of this analysis.
The partial molar volumes of THF and water86 were used to compute %v/v water from ({chi }_{water}).
Each sample was analyzed in triplicate.
Light scattering experiments were conducted in triplicate at room temperature (23 °C) using a Malvern Zetasizer Nano ZSP. Samples were equilibrated for 120 s prior to each measurement and measurements were repeated at least three times for every sample. The refractive index used was 1.3 for water18,87 and 1.423 for lauric acid. The density, viscosity and refractive indexes of THF-water mixtures depended on the THF:water ratio, and are as reported elsewhere88,89. Measurements were conducted in triplicate.
This section discusses emulsification between toluene and water, and separation between water and THF in the presence of lauric acid (“Emulsification and solvent separation by lauric acid (without Cu2+)”). We also discuss the mechanisms through which copper ions migrate in the organic phase following solvent separation, in the presence of lauric acid (“Partitioning of Cu2+ ions between the organic solvent and the water phase”). We analyze how copper ions decrease the stability of water-toluene and THF-water emulsions, promoting the separation between free water-rich and organic solvent-rich phases, where copper ions partition (“Emulsion stability with copper salts”). Finally, “Flow test experiments (injectable filters)” discusses injectable filters, which can be used in conjunction with lauric acid for the treatment of copper and toluene pollution in groundwater.
Lauric acid emulsifies toluene and water, and emulsion stability increases from pH = 2 to pH = 6.5, and from pH = 6.5 to pH = 13 (Fig. S1, supporting information file). Emulsion stability at basic pH is correlated to low interfacial tension. The interfacial tension measured at the toluene-water interface, using 0.125 M lauric acid (relative to the toluene phase) is similar at acidic pH (20.0 ± 1.1 mN/m) and at circum-neutral pH (24.2 ± 2.7 mN/m), and lower at basic pH (13.0 ± 0.4 mN/m).
The pKa of lauric acid is ≈590. A study conducted in pure water reports that at pH < 4, lauric acid is not dissociated, at circum-neutral pH a portion of lauric acid is in the form of laurate ions, and at pH > 9 all of lauric acid in aqueous solution is in the form of laurate ions91. While lauric acid is insoluble in water, laurate ions have greater affinity for the water phase92. Interfacial tension measurements show that laurate ions are more interfacially active and more effective than lauric acid at stabilizing toluene-water emulsions.
Other studies conducted using lauric acid, water and water-immiscible oils also report that the pH of the water phase affects emulsification. For instance, a study conducted using solutions of lauric acid in paraffin and mineral oil reports that sodium laurate films form at the oil–water interface with NaOH > 0.2 M93. These films stabilize droplets because of their negative electrostatic charge at alkaline pH93. Another study reports that mixed films of lauric acid and laurate enhance the stability of water-cyclohexane and water-n-hexadecane emulsions at basic pH94. Moreover, the oil:water ratio affects emulsion characteristics. As an example, a previous study reports that at high water concentrations, micelles incorporate oil in the aqueous surfactant solution, whereas at high oil:water ratios micelles incorporate water in oil93. Here, the toluene:water ratio used (7:3 toluene:water, v/v) enables the formation of both oil in water and water in oil emulsions at basic pH, as evident from the turbidity of both the toluene and the water layers.
In addition to emulsifying toluene and water, lauric acid also separates THF from water (Fig. 1 and Fig. S2, supporting information file). The purity of the THF and water phases is given in Table 3 (as determined by 1H NMR). The data show that the pH has negligible effect on the purity of the separated water phase after 24 h equilibration. In contrast, lauric acid concentration affect water purity. At circum-neutral pH, purity of the water-rich phase increases with increasing lauric acid concentration (from 0.125 to 1 M, Fig. 2). Nonetheless, using excessively high lauric acid concentrations would not be feasible for practical purposes, and we therefore focus on lower concentrations (e.g., 0.125 M).
Separation between THF and water with 0.125 M lauric acidic, at basic, acidic and circum-neutral pH after 24 h (bottom row) and after 5 min (top row). The THF-water mixture contains 30% THF relative to water, v/v. Images collected 5 min after mixing with 1 M lauric acid are in the supporting information (Fig. S2).
Separation between THF and water at circum-neutral pH (pH = 6.5), with different lauric acid concentrations ranging from 0.2 to 1 M (as indicated on the x axis). Volumes were measured after centrifuging samples for 10 min at 3500 RPM. The THF percentages reported in the legend are relative to the water phase (v/v). The deviation on the ordinate axis was measured using Eq. (1) as follows (Vwater,measured-Vwater,used/Vwater,used)*100(%).
We hypothesize that THF-water separation starts with water partitioning inside self-assembled lauric acid structures. SAXS measurements were conducted to characterize these structures, using THF and THF-water mixtures (containing 90% and 95% THF relative to water, v/v, at circum-neutral and acidic pH, Fig. 3). SAXS patterns are characterized by a single peak, which was fit using the model developed by Teubner and Strey for reverse micelles, which are a thermodynamically stable fluid comprised of water, a hydrophobic solvent, and an amphiphile85. This is different from a kinetically stable emulsion, which separates into a hydrophobic solvent phase and a water phase over time. Samples used in SAXS measurements had a water- to-surfactant molar ratio of 2.2 or less.
SAXS patterns of lauric acid in either 100% THF, or in THF-water mixtures, with 95% THF or 90% THF (at either acidic or circum-neutral pH) relative to water (v/v) and 500 g/L lauric acid. The experimental data are shown in red, and fit to the Steubner and Strey model (continuous black line) or a Gaussian (dashed line). The Ornstein and Zernicke fit (dotted line) is poor, and shown as a reference. The best fitting parameters of the Ornstein and Zernicke model are as follows: 100% THF: a2 = 0.6572, c1 = 152.8; 95% THF, neutral pH: a2 = 0.6366, c1 = 167.0; 90% THF, neutral pH: a2 = 0.6402, c1 = 173.0; 90% THF, acidic pH: a2 = 0.6249, c1 = 175.9. The Teubner and Strey best fitting parameters are as indicated in Table 4.
In the Teubner and Strey model, the intensity is described by Eq. (2), as reported in the “Materials and methods” section. For the purpose of the fit, in our study the (sim ) sign in the original expression by Teubner and Strey85 was substituted with an equal sign in Eq. (2). Note that in Eq. (2) we set the proportionality constant C = 1, because normalized data were used.
The Teubner and Strey model is derived from the phenomenological model developed by Landau to describe changes in free energy F(η) during phase transitions (where η is the order parameter). When a system is not undergoing transitions, η is constant. The free energy F(η) is obtained as the integral of the free energy density f(η). Near the phase transition, changes in η are small and f(η) can therefore be approximated by a truncated Taylor expansion in η95. The coefficients of the Taylor expansion are the fitting parameters which appear in Eq. (2). The order at which the expansion is truncated depends on the problem analyzed and the accuracy desired85. Note the difference between the Teubner and Strey model (which accounts for terms up to q4) and the Ornstein–Zernike model (Eq. 8), which is obtained when considering only the components corresponding to small order parameter fluctuations and only accounts for terms up to q2.
The Ornstein–Zernike equation was developed by Leonard Ornstein and Frits Zernike96. The Ornstein–Zernike equation has been used to estimate the structure factor of liquids and colloids in scattering experiments. While it has been used to study liquids, it is not suitable to describe reverse micelles, as reported by Teubner and Strey85 and as shown in Fig. 3.
The periodicity d and the correlation length ξ for the Teubner and Strey model are provided in Table 4, alongside with the fitting parameters for the samples analyzed.
The good fit of the Teubner and Strey model to the experimental data indicates that lauric acid self-assembles into reverse micelles, which host water in their interior. Note that we also used this model to describe SAXS patterns measured in pure THF as solvent. While water was not added, the solvent was not dried, and water impurities would have been present. The correlation length ξ identified with the Teubner and Strey model in pure THF is the diameter of a reverse micelle, since it is approximately twice the size of a lauric acid monomer reported by an atomic simulation study97.
Based on the Teubner and Strey model, lauric acid self-assembles into micelles, the size of which increases with increasing water content, at neutral pH, as indicated by the increasing value of ξ. This result is attributed to the fact that as the water content increases, the amount of water partitioned into the reverse micelles also increases. With 90% THF and 10% water, the reverse micelle size is greater at neutral than at acidic pH, at which the hydrophilic heads of lauric acid would have a lower negative charge density, leading to decreased electrostatic repulsion and tighter packing. Previous atomistic simulation studies report that the self-assembly of lauric acid in pure water is pH-dependent91,97. At pH = 13 it self-assembles into micelles, whereas at pH = 4–9 it self-assembles into bilayers, and the order parameter increases with decreasing pH91,97. In our study, the solvent was either THF or a mixture of THF and water. Organic solvents in solution would induce the self-assembly of lauric acid into reverse micelles, as reported in a study which used it to remove methylene blue from water, by causing its migration into isopentanol (used as the organic solvent)98.
The periodicity d determined based on the Teubner and Strey model is ≈3.4 times the correlation length ξ, indicating that reverse micelles of lauric acid aggregate. The periodicity d is interpreted as the average distance between the centers of lauric acid reverse micelles within the aggregates. Aggregation between reverse micelles is ascribed to the high lauric acid concentrations used in SAXS measurements.
Note that while a Gaussian model provides a good mathematical fit to the data (Fig. 3), it does not adequately capture the physical characteristics of microemulsions. Based on a Gaussian model, the micelle size is estimated as 2π/qmax (where qmax is the position of the peak maximum) and is 109–115 Å for the different samples analyzed (Table S4, supporting information file). This size is larger than the one determined with Teubner and Strey, and does not correlate well to the size of lauric acid molecules.
Light scattering experiments were conducted to complement SAXS results, to probe different length scales. With 90% DMSO, droplet size was above the range of detection of the zeta-sizer used for light scattering experiments, and samples phase separated after 48 h at either circum-neutral or acidic pH. With 95% THF, light scattering experiments reveal that droplets are 450 ± 82 nm and 505 ± 176 nm at circum-neutral and acidic pH, respectively.
In summary, based on our results we hypothesize that reverse micelles are the precursors to droplets, and that they grow upon increasing the water content in THF, in agreement with previous studies99. Reverse micelles would grow into droplets, and progressive increase in droplet size would ultimately lead to phase separation (Fig. 4). Recall that bottle tests show that at circum-neutral pH, emulsions are water in THF (rather than THF in water). Therefore, the data suggest that when the percentage of water exceeds the percentage of THF, reverse micelles swell to host increasing volumes of water in their interior and partition in the THF-rich phase.
Proposed mechanism of THF-water separation by lauric acid. Note that this mechanism occurred when mixing lauric acid in its dry form to THF-water mixtures. Mixing dry lauric acid in water is an option when treating surface water. Delivery of lauric acid in polluted aquifers requires that its is dissolved in a liquid carrier, e.g., canola oil, as discussed later and schematized in Fig. 11.
ATR-FTIR was used to analyze intermolecular interactions between THF, water and lauric acid. This analysis was conducted to probe if lauric acid interfered with THF-water interactions, inducing solvent separation. THF and water interact through H-bonds100. Species such as sugars and sodium lauroyl lactylate64 preferentially interact with water through H-bonds, causing separation between water and THF or acetonitrile76. At circum-neutral pH, part of lauric acid should be in the form of laurate ions (as discussed earlier). Although laurate ions are interfacially active, analysis of the H-bond region indicates that lauric acid had a negligible effect on H-bonding of the water phase at either acidic or circum-neutral pH (Fig. S3 and Tables S1–S3, supporting information file).
Since water-THF separation by lauric acid cannot be explained based on the effect of lauric acid on H-bonding of water, further ATR-FTIR analyses were conducted on samples containing 1 M lauric acid in 3:7 THF:water (v/v), at circum-neutral, acidic and basic pH. Specifically, we analyzed the top and bottom phase of the samples, to determine the purity of the separated phases and to probe the effect of pH on lauric acid partitioning between phases. The spectra of all THF-water mixtures (without lauric acid) were largely similar at all pH values analyzed (Fig. S5, supporting information file). The spectra of the bottom water-rich phase were also spectroscopically identical at all pH values (Fig. S6, supporting information file). Moreover, the spectra of the bottom layers of THF-water mixtures separated by lauric and of THF-water mixtures without lauric acid are largely similar, with the exception of the intensity of the THF band in the 2900 cm−1 region (inset of Fig. S6, supporting information file). This result indicates that the water-rich layer separated by lauric acid does not contain lauric acid (i.e., lauric acid partitions mainly in the THF-rich phase). The intensity difference seen in the CH stretching region can be used to roughly estimate the THF content in the bottom water-rich layer. Integrating this peak and comparing its area to the one of the peak measured in 3:7 THF:water mixture (before separation with lauric acid), we determined that the THF content in the bottom layer is 18.5%, in agreement with 1H NMR data.
Figure 5 shows the spectra of 3:7 THF:water mixtures (without lauric acid) and of the top layer of mixtures separated by lauric acid, at different pH values. Tables 4 and 5 highlight relevant absorbance peaks. The spectrum of water is also included for comparison. The spectra of lauric acid powder, pure THF and 1.5 M lauric acid in THF are shown in Fig. S4 (supporting information file), as a reference. The broad band at wavenumbers greater than 3000 cm−1 corresponds to O–H stretching vibrations76. The peaks between 3000 and 2800 cm−1 are due to the CH stretching vibrations of both THF and lauric acid101. The double peak centred at 1720 cm−1 corresponds to the C = O stretching mode of lauric acid, specifically to lauric acid molecules with two hydrogen bonds (low frequency) and with one hydrogen bond (high frequency)102. The water bending mode (δHOH) is at 1640 cm−1103. At lower frequencies, the fingerprint region contains a number of peaks corresponding to characteristic vibrations, including aliphatic bending (at 1460 cm−1,104) and C–O stretching (at ~ 1060 cm−1,105) modes. Note that the spectra do not show the characteristic peaks of carboxylates around 1580–1550 cm−1 (for the antisymmetric COO− vibrations) and 1417–1308 cm−1 (for the symmetric COO− vibrations). This indicates that the top layer emulsion contains lauric acid in its protonated form only. Although the spectra of the bottom water-rich layer are identical for all pH values, the intensity of the top-layer carbonyl stretching band at 1720 cm−1 decreases with decreasing pH. Therefore, we hypothesize that the deprotonated form of lauric acid preferentially partitions at the interface between the water-rich and the THF-rich layers. This hypothesis is further supported by our interfacial tension measurements, as will be discussed later in this section.
Spectra of the top (THF-rich) layer of THF-water mixtures separated using 1 M lauric acid under acidic (black), circum-neutral (red) and basic (green) conditions. THF-water mixtures were prepared using 30:70 THF:water (v/v) mixtures. The spectra of 30:70 THF:water (v/v) mixtures (without lauric acid) (blue) and the spectra of pure water (cyan) are also shown for comparison. The inset shows the carbonyl and water bending region of the spectra. The grey dashed line indicates the shift in the THF C–O stretch peak.
Wu et al. used the shift of the water bending band 1640 cm−1 (inset, Fig. 5) to quantify the water content in mixtures of water and glycerol, with higher frequencies corresponding to lower water content106. Table 5 shows the δHOH frequency for each sample. These values indicate that the water content increases with pH and in all cases is lower than in the 3:7 THF:water (v/v) mixture (without lauric acid).
This observation is further supported by analysis of the O–H stretching region. Indeed, the area under the O–H stretching band increases with increasing pH, indicating that more water is present in the THF phase at higher pH. However, the shape of the band is identical for all pH values, indicating that the nature of H-bonds is the same at all pH values. Hence, differences between separation efficiency and emulsion stability are not due to changes in H-bonding in the bulk THF and water phases.
The C–O stretch peak of THF for each of the samples also undergoes a shift, as indicated by the grey dashed line in Fig. 5. The higher frequency shoulder centred at 1068 cm−1 corresponds to the C–O stretch from the carboxylic group of lauric acid, whereas the lower frequency peak ranging from 1055 to 1040 cm−1 corresponds to the C–O stretch of the THF. Purkayastha and Madhurima show the spectra of progressively hydrated THF, where the C–O stretch band shifts to lower frequencies as a function of hydration107. In our case, the C–O stretch band shifts from 1066 cm−1 for pure THF to 1040 cm−1 for 3:7 THF:water mixtures without lauric acid. The shift seen in the absorbance peaks of ATR-FTIR spectra is summarized in Table 6. The data indicate that that the top layer of separated THF-water mixtures is enriched in THF compared to 3:7 THF:water mixtures (without lauric acid), at all pH values. Also, the molar fraction of THF in the top layer is pH-dependent. It is highest at acidic pH, at which the analysis of the water bending peak indicates that the water content of THF is lowest. This result is in agreement with bottle tests, which show that water in THF emulsions are least stable at acidic pH.
With 1 M lauric acid, the interfacial tension between THF and water is 2.96 ± 2.56 mN/m at pH = 2, 4.46 ± 0.02 mN/m at circum-neutral pH, and 9.51 ± 0.01 mN/m at pH = 13. In the case of immiscible fluids, the adsorption of interfacially active species at the liquid–liquid interface decreases the interfacial tension. In the case of toluene-water, interfacial tension is lowest at the highest pH, as discussed earlier. Here, we speculate that changes in the interfacial tension between THF and water are associated both to the effect of lauric acid on the structure of the bulk solvents, and on the adsorption of laurate ions at the THF-water interface. At acidic pH, ATR-FTIR data show that undissociated lauric acid is present in THF much more so than at any other pH and likely does not adsorb at the THF-water interface to produce elastic films. (Once again, note the difference between THF-water and toluene-water samples. In the case of toluene, interfacial tension between toluene and water is highest at acidic pH, because undissociated lauric acid has limited interfacial activity). In contrast, at basic pH, ATR-FTIR data show that laurate ions are not present in either the top or bottom layers, although the amount of lauric acid in the top phase is at its lowest. We contend that laurate (carboxylate) ions partition at the THF-water interface. Adsorption of the carboxylate ions at the THF-water interface would yield stable interfacial films. With such films, the liquid lamella breaks when subjected to greater tension (compared to acidic pH), when moving the du Noüy ring from the water to the THF phase. In other words, the higher interfacial tension measured at basic pH than at acidic pH is ascribed to the elasticity of laurate films at the THF-water interface. At basic pH, we speculate that the elasticity and electrostatic charge of interfacial films of laurate ions explain THF-water emulsion stability108. Interfacial film thickness can also contribute to emulsion stability109, although we have not investigated it in this study.
Note that while this study focuses on THF-water separation, lauric acid also separates water from other water-miscible solvents. For instance, lauric acid separates isopropyl alcohol (IPA) from water, although higher concentrations are required (Fig. S7). Lauric acid also separates dioxane from water, although separation is poor (Fig. S8), likely due to the poorer solubility of lauric acid in dioxane. Dioxane is used to stabilize chlorinated compound formulations, and it poses environmental concerns because of its toxicity and mobility in groundwater110,111.
As discussed in the previous section, lauric acid separates THF and water. Separation between THF and water also occurs with aqueous solutions of either 0.03 M CuSO4 or 0.03 M CuCl2 (Fig. 6). With 30% THF (relative to the water phase, v/v), 0.125 M lauric acid and at circum-neutral pH, the percent difference (deviation) between the initial water added and the volume of the water-rich layer after separation is 28.1 ± 1.0% and 28.1 ± 1.0% with 0.03 M CuCl2 and 0.03 M CuSO4, respectively. Increasing lauric acid concentration to 0.25 M decreases the deviation to approximately 25% with aqueous solutions of either 0.03 M CuSO4 or 0.03 M CuCl2. This result is similar to observations without copper salts (Fig. 2), which show increased THF-water separation with increasing lauric acid concentrations.
Bottle tests conducted using aqueous solutions of 0.03 M CuCl2 and CuSO4, using 30% or 50% THF v/v relative to water, at circum-neutral pH. Copper ions partition in the THF phase only at circum-neutral, while they remain solubilized in water at pH = 2 and precipitate in part out of solution at pH = 13 (Fig. S10, supporting information file). Images were taken after leaving vials to sit overnight.
Upon THF-water separation, Cu2+ ions partition in the THF phase at circum-neutral pH, as qualitatively observed based on the discoloration of the top THF-rich layer (Fig. 6). This does not occur at pH = 2 (at which Cu2+ remains dissolved in water, Fig. S9, supporting information file). At pH = 13, part of the copper ions partition in the THF layer, and part precipitate out of solution, entraining laurate ions (as evident from the white color of the precipitates, Fig. S10, supporting information file). Note that precipitation of Cu2+ ions at basic pH would also occur without lauric acid. These results show that circum-neutral pH is preferable to achieve the simultaneous separation of THF and copper ions from water, when using lauric acid.
The data show that laurate ions (present at circum-neutral pH) act as carriers for Cu2+, transporting it into the THF phase. Cu2+remain in the THF-rich phase over a period of approximately three weeks, after which they return into the water phase. These results indicate that Cu2+migration into the THF-rich phase is a transient phenomenon, which would however allow removal of copper from water. We conducted ATR-FTIR experiments to probe copper-lauric acid interactions. Figure 7 shows the ATR-FTIR spectra of the top and bottom phase of samples prepared with 1 M lauric acid and either 3:7 THF:100 mM CuSO4 mixtures (using water at circum-neutral pH) or 3:7 THF:water mixtures (using water at acidic pH). The reason for using water at acidic pH in the absence of copper salts is to have a largely clear top, THF-rich layer. The top layer is also largely clear at circum-neutral pH, in the presence of copper salts (Fig. 6). When samples are prepared with CuSO4, the data indicate its presence in the bottom layer, whereas the spectrum of the top layer is identical with and without copper (inset shows sulfate region in Fig. 7). Also, the signatures of Cu-laurate complexes and sulfates are not detected in ATR-FTIR spectra. Nonetheless, the top layer has a blue discoloration, as highlighted above (Fig. 6). Therefore, the data suggest that laurate ions release free copper ions in the top THF-rich phase, rather than forming stable complexes with it. Previous studies report that metal ion transport into organic phases can be mediated by carboxylate ions112,113,114, in agreement with our hypothesis and results. After dissociating from laurate ions, Cu2+ions eventually return to the water phase, as indicated earlier.
ATR-FTIR spectra of samples prepared with 1 M lauric acid, and 3:7 THF: 100 mM CuSO4 in water, at circum-neutral and acidic pH. These samples were separated into a top and a bottom phase. The color coding is as follows: bottom layer (black), top layer (red) and top layer at acidic pH (green). Red and green lines are identical in shape and intensity. Inset shows the sulfate absorbing region, indicating that there is no sulfate in the top layer of separated THF-water mixtures, in the presence of copper.
Finally, before discussing Cu2+ partitioning into water-immiscible solvents such as toluene and hexane, note that Cu2+ also partitions into dioxane at circum-neutral pH (although lauric acid-induced dioxane-water separation is poor, Figs. S8–S11).
Copper partitioning between toluene and water was examined through bottle tests conducted using 30 mM CuCl2 or CuSO4 solutions, toluene, and either lauric acid alone or a solution of lauric acid in canola oil (added as a 23 mM lauric acid in canola oil solution), when using water with initial pH = 13 (adjusted with 10 mM NaOH). Dispensing lauric acid in canola oil solutions would be useful for groundwater remediation, to deliver lauric acid to the polluted zones. When treating water at the surface, neat lauric acid can be used instead. Bottle tests show that Cu2+ initially partitions in the toluene phase in the presence of lauric acid, when using water with initial pH = 13 (adjusted with NaOH, Figs. S12, S13, supporting information file). After 24 h, Cu2+ ions segregate in a layer at the toluene-water interface (Fig. S14, supporting information file). Similar results are also obtained with hexane (supporting information, Fig. S15). This does not occur in the absence of either lauric acid or without NaOH (Fig. S13, supporting information). As discussed earlier, the pKa of lauric acid is ≈590. At basic pH, lauric acid would be dissociated and it would therefore be able to interact with copper cations (e.g., through electrostatic interactions).
ICP tests conducted on the water phase was used to quantify the percent removal of Cu2+ ions from CuCl2 and CuSO4 solutions (Tables 7, 8). Removal was greatest (≈60%) with initial concentrations of 10 mM copper ions in water, when using 1:1 0.25 M lauric acid in canola oil:toluene as the oil phase. Percent removal efficiency decreases with 10 mM copper ions in water, when the lauric acid concentration is kept constant. This is likely because less copper can bind to lauric acid, when the ratio of lauric acid to copper ions decreases. Future research will focus on identifying compounds which enable greater copper ion removal from water.
As discussed earlier, Cu2+ and laurate ions likely interact through physical interactions (e.g., electrostatic interactions), causing Cu2+ to partition at the toluene-water interface. The ATR-FTIR spectra of the oil phase of samples containing either 30 mM CuCl2 or CuSO4, and 10 mM NaOH (relative to the water phase), lauric acid in canola oil and toluene are similar to those of samples containing lauric acid in toluene, with the exception of the peak at ≈1160 cm−1 (Fig. 8). This peak is also observed in the top phase of samples prepared with water and 10 mM NaOH, 0.25 M lauric acid in canola oil and toluene, without Cu2+. Therefore, it is not representative of chemical bonding between Cu2+ and lauric acid or laurate ions. New peaks do not appear in the spectra of samples containing both lauric acid and copper salts. Therefore, ATR-FTIR data do not highlight any chemical bonding between Cu2+ and lauric acid, in agreement with the results obtained with THF.
ATR-FTIR spectra of samples prepared with lauric acid in canola oil and toluene and DI water with 10 mM NaOH, with or without copper salts, and with lauric acid in toluene alone. ATR-FTIR spectra were collected for the top phase (i.e., the oil phase) of samples prepared using 5 mL of either 30 mM CuCl2 or CuSO4 solutions, and 2 mL of oil (containing 1:1 toluene to 0.25 M lauric in canola oil solution).
Note the marked ATR-FTIR -OH scissor and -OH stretch absorbance peaks at ≈1600 cm−1 and ≈3400 cm−1 in the ATR FTIR spectra of samples prepared with water and 10 mM NaOH, 0.25 M lauric acid in canola oil and toluene (without copper salts). These peaks are absent in the oil phase of samples which also contain copper salts, indicating negligible water content. This result indicates that water in toluene emulsions are more stable with than without copper salts. Emulsion stability is further discussed in the following section (“Emulsion stability with copper salts”).
The goal of this study is to use lauric acid to separate water from toluene and copper, and THF and copper. Stable emulsions of either THF or toluene in water would entrain organics solvents and copper (partitioned inside them) into the water phase. Unless filters are used, this would hinder water purification. “Flow test experiments (injectable filters)” will discuss injectable filters, which can be used in conjunction with lauric acid for the treatment of copper and toluene pollution in groundwater. Stable water in oil emulsions would be less problematic, although they are not desirable because they would lead to larger volumes of liquid waste following treatment.
Water in THF and THF in water emulsions are not stable with THF and either CuCl2 or CuSO4, as shown for instance in Fig. 6 (where mixtures are separated into free phases). As a result, there should be limited entrainment of Cu2+ in the water phase.
With 50% water and 50% toluene (without canola oil), some toluene remains emulsified in water after a day, as indicated by residual turbidity of the water phase (Fig. S13, supporting information file). Similar results are obtained with canola oil (Fig. S12, supporting information file). Recall that canola oil is used to enable the delivery of lauric acid into polluted aquifers. Over short time intervals, water in oil and oil in water emulsions are observed for samples prepared with either 30 mM CuCl2 or CuSO4 aqueous solutions, toluene and lauric acid in canola oil solutions (cf. optical microscopy images, Fig. 9). Toluene droplets in water can be excluded using filters, as we will further discuss in the following section (“Flow test experiments (injectable filters)”). Water in oil emulsions are promptly destabilized with CuSO4, whereas sparse oil in water droplets are observed with CuCl2 (image not shown). After 24 h, water in oil emulsions are also not observed with CuCl2. After this time period, flocs segregate at the oil–water interface (e.g., Fig. S14, supporting information).
Optical microscopy images of water in oil emulsions sampled following bottle tests conducted using toluene (10% v/v), 0.25 M lauric acid in canola oil (10% v/v) and either 30 mM CuCl2 solutions (70% v/v, a) or 30 mM CuSO4 solutions (70% v/v, b), with 10 mM NaOH. The scalebar is 100 μm.
The interfacial tension measured with lauric acid at the water-canola oil + toluene interface is 10.30 ± 0.18 mN/m, with 10 mM NaOH. The interfacial tension of lauric acid decreases to 27.32 ± 0.03 mN/m with CuSO4 and NaOH, confirming that Cu2+ interacts with lauric acid (likely through electrostatic interactions), forming flocs which are less effective at stabilizing emulsions than free laurate ions.
Compressional rigidity is also correlated to emulsion stability18. Compression isotherms measured with lauric acid and CuSO4 are largely flat (data not shown), indicating that either films are soft or that interfacially active species rapidly desorb upon compression109. Either scenario would lead to poor emulsion stability109. Note that other factors also affect emulsion stability109. As an example, flocs can contribute steric repulsion between droplets and stabilize them through Pickering stabilization mechanisms23. Pickering stabilization mechanisms can account for the stability of emulsions observed with lauric acid and CuSO4 over short time periods. Compression isotherms measured with lauric acid and CuCl2 indicate that interfacial films are rigid, as demonstrated by the increase in pressure (19 ± 3 mN/m, Fig. 10). When films were re-compressed immediately after the first compression, the re-compression isotherm is similar to the first compression. This indicates that interfacially active species either do not desorb upon compression, or they rapidly re-adsorb18. Either scenario would promote emulsion stability, explaining why emulsions were more stable with CuCl2 than with CuSO418. Nonetheless, emulsions were not observed after 24 h even with CuCl2, as highlighted above. Rapid emulsion separation can be achieved even in aquifers using injectable filters, as discussed in “Flow test experiments (injectable filters)”.
Sample compression isotherm measured at the oil water interface. The aqueous and oil phases were obtained starting from samples prepared with 2:1 toluene: 0.25 M lauric in canola oil solution and copper salt solutions (30 mM CuCl2 + 10 mM NaOH or 30 mM CuSO4 + 10 mM NaOH), as described in “Static interfacial tension measurement”. Samples were separated and each phase was re-introduced in the trough, to create a planar interface.
Flow tests experiments are used to investigate the effectiveness of injectable filters in removing copper from water co-polluted by copper and toluene, when used in conjunction with lauric acid. These filters would enable the simultaneous separation of copper and toluene from water, preventing them from migrating downstream. Pollutants could then be extracted upstream from the filter (Fig. 11).
Schematics of the proposed approach, which combines HEC + injectable filters and lauric acid to simultaneously prevent copper ion and toluene migration. Once the flow of toluene and copper is arrested upstream of the filters, these contaminants can be extracted from the aquifer (e.g., using a pumping well). Note that while HEC + filters retain toluene in which Cu2+ partitions, they allow water flow. Also note that while mixing lauric acid in canola oil is required to enable its injection in polluted aquifers, lauric acid can be introduced in wastewater to be treated at the surface in its dry form (e.g., as a powder).
Our previous studies showed that injectable filters could retain hydrophobic solvents such as toluene and hexane51, and that HEC + injectable filters retained diesel droplets emulsified by bacterial biosurfactants81. Here, HEC + injectable filters retain toluene containing Cu2+ ions, as shown by ICP-OES analyses (Table 9). Copper ion removal achieved using filters is comparable to bottle test experiments (≈60%, starting from 30 mM Cu2+), even without equilibrating for 24 h. This result indicates that filters aid in the simultaneous removal of copper ions and toluene.
In contrast, these filters cannot exclude THF separated from water by lauric acid, because of its higher polarity compared to toluene. Therefore, lauric acid cannot be used for the in situ separation of water from THF and copper ions. In contrast, lauric acid would be better suited to treat water polluted by copper and THF at the surface, for instance after its extraction from polluted aquifers using pump and treat.
Lauric acid can be used to purify water polluted with THF at ambient temperature (20 °C), with minimal energy costs. At the onset of THF-water separation and with > 90% THF (v/v, relative to water), lauric acid self-assembles into reverse micelles. These reverse micelles are ≈25 Å in size and host water in their interior, as shown by SAXS. They swell with increasing water content, ultimately leading to free phase separation. With 1 M lauric acid and 7:3 THF:water mixtures, the purity of the water phase is 87% at either acidic, semi-neutral or basic pH (as shown by 1H NMR). Separation efficiency decreases at lower lauric acid concentrations, and is 76% with 0.125 M lauric acid. Therefore, our facile treatment approach finds potential applications for the treatment of either wastewater or groundwater.
Lauric acid also removes copper from water co-polluted with either THF or toluene. It interacts with copper ions through physical interactions (e.g., electrostatic interactions) and causes their migration into the organic phase. Model sandy aquifers co-polluted with toluene and Cu2+ were treated with lauric acid, and HEC + semi-permeable barriers were placed downstream of the pollutant plume. These barriers retain both toluene and ≈50% Cu2+. Therefore, they have the potential to offset the risk of pollutant migration and aid in the protection of downstream receptors. Extraction of co-contaminants upstream of the filters can be achieved using pumping wells, enabling their simultaneous removal from aquifers.
Future research will focus on removing additional ions from water. We will also focus on improving the purity of the water phase separated from water miscible solvents and ions using other amphiphilic molecules.
The datasets used and/or analysed during the current study available from the corresponding author on reasonable request.
Huang, W.-H., Dong, C.-D., Chen, C.-W., Surampalli, R. Y. & Kao, C.-M. Application of sulfate reduction mechanisms for the simultaneous bioremediation of toluene and copper contaminated groundwater. Int. Biodeterior. Biodegradation 124, 215–222 (2017).
CAS  Google Scholar 
Mulligan, C. N., Yong, R. N. & Gibbs, B. F. Remediation technologies for metal-contaminated soils and groundwater: An evaluation. Eng. Geol. 60, 193–207 (2001).
Google Scholar 
Li, J., Alves de Toledo, R. & Shim, H. Multivariate optimization for the simultaneous bioremoval of BTEX and chlorinated aliphatic hydrocarbons by Pseudomonas plecoglossicida. J. Hazard. Mater. 321, 238–246 (2017).
CAS  Google Scholar 
Sales, C. M., Grostern, A., Parales, J. V., Parales, R. E. & Alvarez-Cohen, L. Oxidation of the cyclic ethers 1, 4-dioxane and tetrahydrofuran by a monooxygenase in two Pseudonocardia species. Appl. Environ. Microbiol. 79, 7702–7708 (2021).
Google Scholar 
Yin, Y. et al. Progressive freezing and suspension crystallization methods for tetrahydrofuran recovery from Grignard reagent wastewater. J. Clean. Prod. 144, 180–186 (2017).
CAS  Google Scholar 
Arjoon, A., Olaniran, A. O. & Pillay, B. Co-contamination of water with chlorinated hydrocarbons and heavy metals: challenges and current bioremediation strategies. Int. J. Environ. Sci. Technol. 10, 395–412 (2013).
CAS  Google Scholar 
Li, Q. et al. Effects of co-contamination of heavy metals and total petroleum hydrocarbons on soil bacterial community and function network reconstitution. Ecotoxicol. Environ. Saf. 204, 111083 (2020).
CAS  Google Scholar 
Chen, F. et al. Interaction of cadmium and polycyclic aromatic hydrocarbons in co-contaminated soil. Water Air Soil Pollut. 229, 1–10 (2018).
Google Scholar 
Sun, Y., Zhou, Q., Xu, Y., Wang, L. & Liang, X. Phytoremediation for co-contaminated soils of benzo [a] pyrene (B [a] P) and heavy metals using ornamental plant Tagetes patula. J. Hazard. Mater. 186, 2075–2082 (2011).
CAS  Google Scholar 
Li, F., Deng, D., Zeng, L., Abrams, S. & Li, M. Sequential anaerobic and aerobic bioaugmentation for commingled groundwater contamination of trichloroethene and 1, 4-dioxane. Sci. Total Environ. 774, 145118 (2021).
CAS  Google Scholar 
Syranidou, E., Christofilopoulos, S., & Kalogerakis, N. Juncus spp.—the helophyte for all (phyto) remediation purposes? New Biotechnol. 38, 43–55 (2017).
Telepanich, A., Marshall, T., Gregori, S., Marangoni, A. G. & Pensini, E. Graphene-Alginate Fluids as Unconventional Electrodes for the Electrokinetic Remediation of Cr(VI) 232 (Air, & Soil Pollution, Water, 2021).
Google Scholar 
Alshawabkeh, A. N. Electrokinetic soil remediation: Challenges and opportunities. Sep. Sci. Technol. 44, 2171–2187 (2009).
CAS  Google Scholar 
Gidudu, B. & Chirwa, E. M. N. The combined application of a high voltage, low electrode spacing, and biosurfactants enhances the bio-electrokinetic remediation of petroleum contaminated soil. J. Clean. Prod. 276, 122745 (2022).
Google Scholar 
Kim, S. O., Jeong, J. Y., Lee, W. C., Yun, S. T. & Jo, H. Y. Electrokinetic remediation of heavy metal-contaminated soils: Performance comparison between one-and two-dimensional electrode configurations. J. Soils Sedim. 1, 1–15 (2020).
Google Scholar 
Kim, W. S. et al. Field application of electrokinetic remediation for multi-metal contaminated paddy soil using two-dimensional electrode configuration. Environ. Sci. Pollut. Res. 21, 4482–4491 (2014).
CAS  Google Scholar 
Tarekegn, M. M., Hiruy, A. M. & Dekebo, A. H. Nano zero valent iron (nZVI) particles for the removal of heavy metals (Cd 2+, Cu 2+ and Pb 2+) from aqueous solutions. RSC Adv. 11, 18539–18551 (2021).
CAS  PubMed Central  Google Scholar 
Marshall, T., Gravelle, A., Marangoni, A. G., Elsayed, A. & Pensini, E. Zein for hydrocarbon remediation: Emulsifier, trapping agent, or both?. Colloids Surf. A 589, 124456 (2020).
CAS  Google Scholar 
Tsang, D. C., Zhang, W. & Lo, I. M. Copper extraction effectiveness and soil dissolution issues of EDTA-flushing of artificially contaminated soils. Chemosphere 68, 234–243 (2007).
CAS  Google Scholar 
Pensini, E., Laredo, T., Earnden, L., Marangoni, A. G. & Ghazani, S. M. A ‘three in one’complexing agent enables copper desorption from polluted soil, its removal from groundwater and its detection. Colloids Surf. A 624, 126840 (2021).
CAS  Google Scholar 
Xue, Y. et al. Simultaneous removal of benzene, toluene, ethylbenzene and xylene (BTEX) by CaO2 based Fenton system: Enhanced degradation by chelating agents. Chem. Eng. J. 331, 255–264 (2018).
CAS  Google Scholar 
Earnden, L., Laredo, T., Marangoni, A. G. & Pensini, E. Fenton’s degradation of toluene using chelating and emulsifying surfactants. Int. J. Environ. Sci. Technol. 1, 1–14 (2021).
Google Scholar 
Marshall, T., Marangoni, A. G., Lim, L. T., Tchoukov, P. & Pensini, E. Oxidizing emulsifiers: Gelators for water in hydrocarbon reactive emulsions. J. Environ. Chem. Eng. 9, 104998 (2020).
Google Scholar 
Liang, C. & Chen, C.-Y. Characterization of a sodium persulfate sustained release rod for in situ chemical oxidation groundwater remediation. Ind. Eng. Chem. Res. 56, 5271–5276 (2017).
CAS  Google Scholar 
Mosmeri, H., Alaie, E., Shavandi, M., Dastgheib, S. M. M. & Tasharrofi, S. Benzene-contaminated groundwater remediation using calcium peroxide nanoparticles: Synthesis and process optimization. Environ. Monit. Assess. 189, 452 (2017).
Google Scholar 
Minetti, R. C. P., Macaño, H. R., Britch, J. & Allende, M. C. In situ chemical oxidation of BTEX and MTBE by ferrate: pH dependence and stability. J. Hazard. Mater. 324, 448–456 (2017).
Google Scholar 
Leu, J., O’Connell, S. & Bettahar, M. Remedial process optimization and ozone sparging for petroleum hydrocarbon-impacted groundwater. Remediat. J. 26, 73–94 (2016).
Google Scholar 
Shores, A. R., Hethcock, B. & Laituri, M. Phytoremediation of BTEX and Naphthalene from produced-water spill sites using Poaceae. Int. J. Phytorem. 20, 823–830 (2018).
CAS  Google Scholar 
Krouzek, J. et al. Pilot scale applications of microwave heating for soil remediation. Chem. Eng. Process. Process Intensif. 130, 53–60 (2018).
CAS  Google Scholar 
Stefanakis, A. I., Seeger, E., Dorer, C., Sinke, A. & Thullner, M. Performance of pilot-scale horizontal subsurface flow constructed wetlands treating groundwater contaminated with phenols and petroleum derivatives. Ecol. Eng. 95, 514–526 (2016).
Google Scholar 
Jousse, F., Atteia, O., Höhener, P. & Cohen, G. Removal of NAPL from columns by oxidation, sparging, surfactant and thermal treatment. Chemosphere 188, 182–189 (2017).
CAS  Google Scholar 
Pensini, E., Tchoukov, P., Yang, F. & Xu, Z. Effect of humic acids on bitumen films at the oil-water interface and on emulsion stability: Potential implications for groundwater remediation. Colloids Surf. A 544, 53–59 (2018).
CAS  Google Scholar 
Dahal, G., Holcomb, J. & Socci, D. Surfactant-oxidant co-application for soil and groundwater remediation. Remediat. J. 26, 101–108 (2016).
Google Scholar 
Gupta, P.K., & Yadav, B.K. Bioremediation of non-aqueous phase liquids (NAPLS) polluted soil and water resources, in: R.N. Bharagava (Ed.) Environmental Pollutants and their Bioremediation Approaches CRC Press, Boca Raton, 2017, pp. 241–256.
Khodaei, K., Nassery, H. R., Asad, M. M., Mohammadzadeh, H. & Mahmoodlu, M. G. BTEX biodegradation in contaminated groundwater using a novel strain (Pseudomonas sp. BTEX-30). Int. Biodeterior. Biodegradation 116, 234–242 (2017).
CAS  Google Scholar 
Switzer, C., Pironi, P., Gerhard, J. I., Rein, G. & Torero, J. L. Volumetric scale-up of smouldering remediation of contaminated materials. J. Hazard. Mater. 268, 51–60 (2014).
CAS  Google Scholar 
Vidonish, J. E., Zygourakis, K., Masiello, C. A., Sabadell, G. & Alvarez, P. J. Thermal treatment of hydrocarbon-impacted soils: A review of technology innovation for sustainable remediation. Engineering 2, 426–437 (2016).
CAS  Google Scholar 
Earnden, L., Marangoni, A. G., Gregori, S., Paschos, A. & Pensini, E. Zein-bonded graphene and biosurfactants enable the electrokinetic clean-up of hydrocarbons. Langmuir 37, 11153–11169 (2021).
CAS  Google Scholar 
Maturi, K., Reddy, K. R. & Cameselle, C. Surfactant-enhanced electrokinetic remediation of mixed contamination in low permeability soil. Sep. Sci. Technol. 44, 2385–2409 (2009).
CAS  Google Scholar 
Lo, I. M. & Hu, L. M. Long-term migration of light nonaqueous-phase liquids in two unsaturated soils: Clayey silt and fine sand. Pract. Period. Hazard. Toxic Radioact. Waste Manag. 8, 228–237 (2004).
CAS  Google Scholar 
Powers, S. E. et al. The transport and fate of ethanol and BTEX in groundwater contaminated by gasohol. Crit. Rev. Environ. Sci. Technol. 31, 79–123 (2001).
CAS  Google Scholar 
Larter, S. et al. An experimental investigation of geochromatography during secondary migration of petroleum performed under subsurface conditions with a real rock. Geochem. Trans. 1, 54 (2000).
Google Scholar 
Siwik, A. et al. Natural guar, xanthan and carboxymethyl-cellulose-based fluids: Potential use to trap and treat hexavalent chromium in the subsurface. J. Environ. Chem. Eng. 7, 102807 (2019).
CAS  Google Scholar 
Marshall, T. et al. Path-dependent rheology of carbon particle-hydroxyethylcellulose fluids. Colloids Surf. A 612, 126000 (2020).
Google Scholar 
Guerin, T. F., Horner, S., McGovern, T. & Davey, B. An application of permeable reactive barrier technology to petroleum hydrocarbon contaminated groundwater. Water Res. 36, 15–24 (2002).
CAS  Google Scholar 
Vignola, R. et al. Zeolites in a permeable reactive barrier (PRB): One year of field experience in a refinery groundwater—Part 1: The performances. Chem. Eng. J. 178, 204–209 (2011).
CAS  Google Scholar 
Zhao, Q., Choo, H., Bhatt, A., Burns, S. E. & Bate, B. Review of the fundamental geochemical and physical behaviors of organoclays in barrier applications. Appl. Clay Sci. 142, 2–20 (2017).
CAS  Google Scholar 
Do, S.-H., Kwon, Y.-J. & Kong, S.-H. Feasibility study on an oxidant-injected permeable reactive barrier to treat BTEX contamination: adsorptive and catalytic characteristics of waste-reclaimed adsorbent. J. Hazard. Mater. 191, 19–25 (2011).
CAS  Google Scholar 
Liang, S. H., Kao, C. M., Kuo, Y. C. & Chen, K. F. Application of persulfate-releasing barrier to remediate MTBE and benzene contaminated groundwater. J. Hazard. Mater. 185, 1162–1168 (2011).
CAS  Google Scholar 
Lin, C. W., Chen, L. H., Yet-Pole, I. & Lai, C. Y. Microbial communities and biodegradation in lab-scale BTEX-contaminated groundwater remediation using an oxygen-releasing reactive barrier. Bioprocess Biosyst. Eng. 33, 383–391 (2010).
CAS  Google Scholar 
Marshall, T. et al. Selective solvent filters for non-aqueous phase liquid separation from water. Sci. Rep. 10, 1–13 (2020).
Google Scholar 
Hu, D. et al. Performance and extracellular polymers substance analysis of a pilot scale anaerobic membrane bioreactor for treating tetrahydrofuran pharmaceutical wastewater at different HRTs. J. Hazard. Mater. 342, 383–391 (2018).
CAS  Google Scholar 
Mei, X. et al. Acetonitrile wastewater treatment enhanced by a hybrid membrane-aerated bioreactor containing aerated and non-aerated zones. Biores. Technol. 289, 121754 (2019).
CAS  Google Scholar 
Li, T., Liu, J., Bai, R., Ohandja, D. G. & Wong, F. S. Biodegradation of organonitriles by adapted activated sludge consortium with acetonitrile-degrading microorganisms. Water Res. 41, 3465–3473 (2007).
CAS  Google Scholar 
Raj, C. C. & Quen, H. L. Advanced oxidation processes for wastewater treatment: Optimization of UV/H2O2 process through a statistical technique. Chem. Eng. Sci. 60, 5305–5311 (2005).
CAS  Google Scholar 
Wang, Y. et al. Green recovery of hazardous acetonitrile from high-salt chemical wastewater by pervaporation. J. Clean. Prod. 197, 742–749 (2018).
CAS  Google Scholar 
Mei, X. et al. A novel system for zero-discharge treatment of high-salinity acetonitrile-containing wastewater: Combination of pervaporation with a membrane-aerated bioreactor. Chem. Eng. J. 384, 123338 (2020).
CAS  Google Scholar 
Longeras, O., Gautier, A., Ballerat-Busserolles, K. & Andanson, J. M. Deep eutectic solvent with thermo-switchable hydrophobicity. ACS Sustain. Chem. Eng. 8, 12516–12520 (2020).
CAS  Google Scholar 
Tabata, M., Kumamoto, M. & Nishimoto, J. Chemical properties of water-miscible solvents separated by salting-out and their application to solvent extraction. Anal. Sci. 10, 383–388 (1994).
CAS  Google Scholar 
Souza, R. L., Lima, R. A., Coutinho, J. A., Soares, C. M. & Lima, Á. S. Aqueous two-phase systems based on cholinium salts and tetrahydrofuran and their use for lipase purification. Sep. Purif. Technol. 155, 118–126 (2015).
CAS  Google Scholar 
Wang, B., Ezejias, T., Feng, H. & Blaschek, H. Sugaring-out: A novel phase separation and extraction system. Chem. Eng. Sci. 63, 2595–2600 (2008).
CAS  Google Scholar 
Dhamole, P. B., Mahajan, P. & Feng, H. Phase separation conditions for sugaring-out in acetonitrile−water systems. J. Chem. Eng. Data 55, 3803–3806 (2010).
CAS  Google Scholar 
de Brito Cardoso, G. et al. Novel aqueous two-phase systems composed of acetonitrile and polyols: phase diagrams and extractive performance. Sep. Purif. Technol. 124, 54–60 (2014).
Google Scholar 
Marshall, T., Earnden, L., Marangoni, A. G., Laredo, T. & Pensini, E. Cubic mesophases of self-assembled amphiphiles separate miscible solvents. Colloids Surf. A 650, 129548 (2022).
CAS  Google Scholar 
Saielli, G. & Bagno, A. Preferential solvation of glucose and talose in water–acetonitrile mixtures: A molecular dynamics simulation study. Phys. Chem. Chem. Phys. 12, 2981–2988 (2010).
CAS  Google Scholar 
Suzuki, T. The hydration of glucose: The local configurations in sugar–water hydrogen bonds. Phys. Chem. Chem. Phys. 10, 96–105 (2008).
CAS  Google Scholar 
Andrić, J. M., Janjić, G. V., Ninković, D. B. & Zarić, S. D. The influence of water molecule coordination to a metal ion on water hydrogen bonds. Phys. Chem. Chem. Phys. 14, 10896–10898 (2012).
Google Scholar 
Chowdhuri, S. & Chandra, A. Dynamics of halide Ion− Water hydrogen bonds in aqueous solutions: Dependence on ion size and temperature. J. Phys. Chem. B 110, 9674–9680 (2006).
CAS  Google Scholar 
Politi, R., Sapir, L. & Harries, D. The impact of polyols on water structure in solution: A computational study. J. Phys. Chem. A 113, 7548–7555 (2009).
CAS  Google Scholar 
Nemati, M., Mogaddam, M. R. A., Farazajdeh, M. A., Tuzen, M. & Khandaghi, J. In-situ formation/decomposition of deep eutectic solvent during solidification of floating organic droplet-liquid-liquid microextraction method for the extraction of some antibiotics from honey prior to high performance liquid chromatography-tandem mass spectrometry. J. Chromatogr. A 1660, 462653 (2021).
CAS  Google Scholar 
Nemati, M., Tuzen, M., Farazajdeh, M. A., Kaya, S. & Mogaddam, M. R. A. Development of dispersive solid-liquid extraction method based on organic polymers followed by deep eutectic solvents elution; application in extraction of some pesticides from milk samples prior to their determination by HPLC-MS/MS. Anal. Chim. Acta 33, 9570 (2022).
Google Scholar 
Jouyban, A., Farajzadeh, M. A., Nemati, M., Nabil, A. A. A. & Mogaddam, M. R. A. Preparation of ferrofluid from toner powder and deep eutectic solvent used in air-assisted liquid-liquid microextraction: Application in analysis of sixteen polycyclic aromatic hydrocarbons in urine and saliva samples of tobacco smokers. Microchem. J. 154, 104631 (2020).
CAS  Google Scholar 
Diaz, R. M., Fernandez, A. M. & Xiberta, J. Extraction of copper from aqueous solutions with carboxylic acids. Chem. Tech. Biotechnol. 36, 273–280 (1986).
CAS  Google Scholar 
Chang, J., Yoo, S., Lee, W., Kim, D. & Kang, T. Spontaneous phase transfer-mediated selective removal of heavy metal ions using biocompatible oleic acid. Sci. Rep. 7, 1–7 (2017).
Google Scholar 
L. Earnden, T. Laredo, A.G. Marangoni, S. Mirzaee Ghazani, E. Pensini, Modulation of the Viscosity of Guar-Based Fracking Fluids Using Salts, Energy & Fuels, 35 (2021) 16007–16019.
Marshall, T., Marangoni, A. G., Laredo, T., Al-Abdul-Wahid, M. S. & Pensini, E. Mechanisms of solvent separation using sugars and sugar alcohols. Colloids Surf. A 642, 128707 (2022).
CAS  Google Scholar 
Levenberg, K. A method for the solution of certain non-linear problems in least squares. Q. Appl. Math. 2, 164–168 (1944).
MathSciNet  MATH  Google Scholar 
Marquardt, D. W. An algorithm for least-squares estimation of nonlinear parameters. J. Soc. Ind. Appl. Math. 11, 431–441 (1963).
MathSciNet  MATH  Google Scholar 
Max, J. J. & Chapados, C. Sucrose hydrates in aqueous solution by IR spectroscopy. J. Phys. Chem. A 105, 10681–10688 (2001).
CAS  Google Scholar 
Lenz, A. & Ojamäe, L. Theoretical IR spectra for water clusters (H2O) n (n= 6–22, 28, 30) and identification of spectral contributions from different H-bond conformations in gaseous and liquid water. J. Phys. Chem. A 110, 13388–13393 (2006).
CAS  Google Scholar 
Marshall, T., Paschos, A., Marangoni, A. G., Yang, F. & Pensini, E. Injectable cationic traps and sticky bacterial emulsifiers: A safe alliance during diesel bioremediation. Colloids Surf. A 613, 126051 (2020).
Google Scholar 
Leontowich, A. F. et al. The lower energy diffraction and scattering side-bounce beamline for materials science at the Canadian Light Source. J. Synch. Radiat. 28, 1 (2021).
Google Scholar 
Von Dreele, R. B. Small-angle scattering data analysis in GSAS-II. J. Appl. Crystallogr. 47, 1784–1789 (2014).
Google Scholar 
Toby, B. H. & Von Dreele, R. B. GSAS-II: the genesis of a modern open-source all purpose crystallography software package. J. Appl. Crystallogr. 46, 544–549 (2013).
CAS  Google Scholar 
Teubner, M. & Strey, R. Origin of the scattering peak in microemulsions. J. Chem. Phys. 87, 3195–3200 (1987).
CAS  Google Scholar 
Egorov, G. I. & Makarov, D. M. Densities and thermal expansions of (water+ tetrahydrofuran) mixtures within the temperature range from (274.15 to 333.15) K at atmospheric pressure. J. Mol. Liquids 310, 113105 (2020).
CAS  Google Scholar 
Pan, Y., Tikekar, R. V., Wang, M. S., Avena-Bustillos, R. J. & Nitin, N. Effect of barrier properties of zein colloidal particles and oil-in-water emulsions on oxidative stability of encapsulated bioactive compounds. Food Hydrocolloids 43, 82–90 (2015).
CAS  Google Scholar 
Das, B., Roy, M. N. & Hazra, D. K. Densities and viscosities of the binary aqueous mixtures of tetrahydrofuran and 1, 2-dimethoxyethane at 298, 308 and 318 K. Indian J. Chem. Technol. (IJCT) 1, 93–97 (1994).
CAS  Google Scholar 
Critchfield, F. E., Gibson, J. A. Jr. & Hall, J. L. Dielectric constant and refractive index from 20 to 35° and density at 25° for the system tetrahydrofuran—Water. J. Am. Chem. Soc. 75, 6044–6045 (1953).
CAS  Google Scholar 
Niu, B. et al. Effect of pH on formation of starch complexes with lauric acid and β-lactoglobulin 132, 109915 (2020).
CAS  Google Scholar 
Morrow, B. H., Koenig, P. H. & Shen, J. K. Atomistic simulations of pH-dependent self-assembly of micelle and bilayer from fatty acids. J. Chem. Phys. 137, 194902 (2012).
PubMed Central  Google Scholar 
Wang, D. & Jingcheng, H. Self-assembly fibrillar network gels of simple surfactants in organic solvents. Langmuir 27, 1713–1717 (2011).
CAS  Google Scholar 
Niraula, B. B., Seng, T. N. & Misran, M. Vesicles in fatty acid salt–fatty acid stabilized o/w emulsion—emulsion structure and rheology. Colloids Surf. A 236, 7–22 (2004).
CAS  Google Scholar 
Saleeb, F. Z., Cante, C. J., Streckfus, T. K., Frost, J. R. & Rosano, H. L. Surface pH and stability of oil-water emulsions derived from laurate solutions. J.Am. Oil Chem. Soc. 52, 208–212 (1975).
CAS  Google Scholar 
Beaud, P. et al. A time-dependent order parameter for ultrafast photoinduced phase transitions. Nat. Mater. 13, 923–927 (2014).
CAS  Google Scholar 
Ornstein, L. S. & Zernike, F. Accidental deviations of density and opalescence at the critical point of a single substance. Proc. R. Netherlands Acad. Arts Sci. 17, 793–806 (1914).
Google Scholar 
Morrow, B. H., Koenig, P. H. & Shen, J. K. Self-assembly and bilayer–micelle transition of fatty acids studied by replica-exchange constant pH molecular dynamics. Langmuir 29, 14823–14830 (2013).
CAS  PubMed Central  Google Scholar 
Bukman, L. et al. Reverse micellar extraction of dyes based on fatty acids and recoverable organic solvents. Sep. Purif. Technol. 242, 116772 (2020).
CAS  Google Scholar 
Reverse micelles: biological and technological relevance of amphiphilic structures in apolar media (Springer New York, NY, 1984).
Shultz, M. J. & Vu, T. H. Hydrogen bonding between water and tetrahydrofuran relevant to clathrate formation. J. Phys. Chem. B 119, 9167–9172 (2015).
CAS  Google Scholar 
Wang, S. H. & Griffiths, P. R. Resolution enhancement of diffuse reflectance ir spectra of coals by Fourier self-deconvolution: 1 CH stretching and bending modes. Fuel 64, 229–236 (1985).
CAS  Google Scholar 
Cui, Y., Rushing, J. C., Seifert, S., Bedford, N. M. & Kuroda, D. G. Molecularly heterogeneous structure of a nonionic deep eutectic solvent composed of N-methylacetamide and lauric acid. J. Phys. Chem. B 123, 3984–3993 (2019).
CAS  Google Scholar 
Van Thiel, M., Becker, E. D. & Pimentel, G. C. Infrared studies of hydrogen bonding of water by the matrix isolation technique. J. Chem. Phys. 27, 486–490 (1957).
Google Scholar 
Francis, S. A. Absolute intensities of characteristic infra-red absorption bands of aliphatic hydrocarbons. J. Chem. Phys. 18, 861–865 (1950).
CAS  Google Scholar 
Bailey, S., Froment, G. F., Snoeck, J. W. & Waugh, K. C. A DRIFTS study of the morphology and surface adsorbate composition of an operating methanol synthesis catalyst. Catal. Lett. 30, 99–111 (1994).
CAS  Google Scholar 
Wu, K., Feng, S., Hedoux, A. & Shalaev, E. Water structure in glycerol: Spectroscopic and computer simulation investigation of hydrogen bonding and water clustering. J. Mol. Liquids 355, 118916 (2022).
CAS  Google Scholar 
Purkayastha, D. D. & Madhurima, V. Interactions in water–THF binary mixture by contact angle, FTIR and dielectric studies. J. Mol. Liquids 187, 54–57 (2022).
Google Scholar 
Amine, C., Dreher, J., Helgason, T. & Tadros, T. Investigation of emulsifying properties and emulsion stability of plant and milk proteins using interfacial tension and interfacial elasticity. Food Hydrocolloids 39, 180–186 (2014).
CAS  Google Scholar 
Pensini, E. et al. Demulsification mechanism of asphaltene-stabilized water-in-oil emulsions by a polymeric ethylene oxide−propylene oxide demulsifier. Energy Fuels 28, 6760–6771 (2014).
CAS  Google Scholar 
Adamson, D. T., Anderson, R. H., Mahendra, S. & Newell, C. J. Evidence of 1, 4-dioxane attenuation at groundwater sites contaminated with chlorinated solvents and 1, 4-dioxane. Environ. Sci. Technol. 49, 6510–6518 (2015).
CAS  Google Scholar 
Isaacson, C., Mohr, T. K. & Field, J. A. Quantitative determination of 1, 4-dioxane and tetrahydrofuran in groundwater by solid phase extraction GC/MS/MS. Environ. Sci. Technol. 40, 7305–7311 (2006).
CAS  Google Scholar 
Lindoy, L. F. & Baldwin, D. S. Ligand design for selective metal-ion transport through liquid membranes. Pure Appl. Chem. 61, 909–914 (1989).
CAS  Google Scholar 
Yoshida, Y. et al. Ion transfer reactions across the aqueous|organic solution interface in the presence of phospholipid layer adsorbed on the interface i1037–i1039 (The Japan Society for Analytical Chemistry, 2001).
Google Scholar 
Wojciechowski, K., Kucharek, M. & Buffle, J. Mechanism of Cu(II) transport through permeation liquid membranes using Azacrown ether and fatty acid as carrier. J. Membr. Sci. 314, 152–162 (2008).
CAS  Google Scholar 
Download references
The authors acknowldge the help of Alicia Telepanich in conducting the experiments described in this paper. Part of the research described in this paper was performed at the Canadian Light Source, a national research facility of the University of Saskatchewan, which is supported by the Canada Foundation for Innovation (CFI), the Natural Sciences and Engineering Research Council (NSERC), the National Research Council (NRC), the Canadian Institutes of Health Research (CIHR), the Government of Saskatchewan, and the University of Saskatchewan. The authors are most grateful to Adam Leontowich (CLS) for the help provided with conducting SAXS measurements and to Beatriz Diaz Moreno (CLS) for facilitating access to CLS. The authors acknowledge the support of the Natural Sciences and Engineering Research Council of Canada (provided through an NSERC Discovery grant, awarded to Dr. Erica Pensini, RGPIN-2018-04636).
School of Engineering, University of Guelph, Room 2525 Richards Bld., 50 Stone Road East, Guelph, ON, N1G 2W1, Canada
Laura Earnden, Tatianna Marshall & Erica Pensini
Food Science Department, University of Guelph, 50 Stone Road East, Guelph, ON, N1G 2W1, Canada
Alejandro G. Marangoni & Jarvis Stobbs
Chemistry Department, Lakehead University, 500 University Ave, Orillia, ON, L3V 0B9, Canada
Thamara Laredo
Canadian Light Source Synchrotron, 44 Innovation Boulevard, Saskatoon, SK, S7N 2V3, Canada
Jarvis Stobbs
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
E.P.: conceptualization; data curation; formal analysis; funding acquisition; investigation; methodology; project administration; resources; supervision; validation; visualization; writing—original draft; writing—review and editing. L.E.: data curation; formal analysis; investigation; methodology; writing—original draft; writing—review and editing. A.G.M.: data curation; formal analysis; investigation; methodology; resources; validation; visualization; writing—review and editing. T.L.: data curation; formal analysis; investigation; methodology; visualization; writing—original draft. J.S.: investigation; data curation; T.M.: investigation.
Correspondence to Erica Pensini.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Earnden, L., Marangoni, A.G., Laredo, T. et al. Decontamination of water co-polluted by copper, toluene and tetrahydrofuran using lauric acid. Sci Rep 12, 15832 (2022). https://doi.org/10.1038/s41598-022-20241-4
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-20241-4
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
Advanced search
Scientific Reports (Sci Rep) ISSN 2045-2322 (online)
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

source

The Google Pixel Buds Pro could be getting custom EQ settings soon – Android Police

A feature we expected at launch could be around the corner
The Google Pixel Buds Pro are one of our favorite pairs of wireless earbuds right now, but they're not without their faults. Among them: the buds launched without user-customizable EQ settings. To date, nearly two months later, you still can't change the way they sound using the Pixel Buds app, beyond a setting that's meant to boost bass at low volumes. According to a teardown by 9to5Google, though, that could be changing soon.
In examining the latest version (1.0.474476083) of the Pixel Buds app, 9to5 discovered references to an upcoming five-band equalizer that allows for manual control of "Low Bass," "Bass," "Mid," "Treble," and "Upper Treble." Interestingly, it seems like those frequency ranges will be configured using sliders that move horizontally rather than vertically. There'll also be built-in presets, including two different bass boost modes and a "Vocal boost" setting.
9to5 also found references to a setting that'll let users change the volume balance of the buds using a slider — moving it to the left will raise the volume on the left side while lowering it on the right, and vice versa.
None of these settings are functional just yet, but the presence of references to them within the Pixel Buds app indicates they could be coming in the near future. Why it's taken so long to implement such seemingly basic features we would've expected to be ready prior to launch is an enduring mystery, but at least we shouldn't have much longer to wait.
Taylor was an amateur phone nerd for the better part of a decade prior to joining Android Police in 2018, where he’s since authored more than a thousand articles about all things Android. Taylor serves as Gadgets Editor, and you’ll see his byline on editorials, reviews, comparative buyer’s guides, and technical explainers, as well as the occasional piece of breaking news. He’s got soft spots for personal audio, wearable tech, smart lights, and mobile photography. There’s a good chance he’s carrying a Pixel phone right now. In his time away from AP, you’ll probably catch Taylor hanging out with his two dogs, playing Xbox, or out shooting with his beloved Fuji X-T20. Send him memes and fan mail at [email protected].

source

Elon alumna Ciara Graves '20 achieves 'gold record' status – Today at Elon

By Olivia Grady, student
September 22, 2022
As marketing manager for the Thrive Music label, Graves worked to help make the ACRAZE track “Do It To It” a worldwide hit.
As marketing manager for Thrive Music record label in Los Angeles, California, Ciara Graves ‘20 has become one of the few Elon University alumni to receive a gold record for her work on the popular ACRAZE track “Do It To It”.
“It was honestly super surreal. I’m a producer and DJ myself so being involved in a project like this was a whirlwind and I would’ve never expected this to happen at all, this soon especially,” Graves explained.
Graves joined Thrive Music in July 2021, and right away she was helping with plans to release the single. She works as the team’s marketing manager and the lead of social media audience development. Her tasks are geared toward the marketing aspect of the music industry, as she works with artists to help promote them, their singles, and the label itself.
For “Do It To It,” Graves worked with the artist ACRAZE to help amplify his social media appearance for the song’s release, specifically with a TikTok dance campaign. The dance became a major trend, with over 3 million videos tapping into the track.
At Elon, Graves was a music production and recording arts major. Her knowledge about the creative aspect of the industry has assisted her when playing on the opposite side of the fence with marketing and promotion.
“Shoutout to Clay Stevenson and Fred Johnson, they were really mentors for me,” Graves said. “I didn’t even really have any marketing background until I just was thrown into it, but I would’ve never found that out if I didn’t have professors to lead me in the right direction to try new things.”
Clay Stevenson, senior lecturer in music at Elon, teaches courses in music production and performing arts, as well as the business of music. When asked about the new success Graves has seen, he says he is not surprised.
“Ciara has all the characteristics it takes to be successful. She’s very relatable, a super hard worker, has a great ear, and is a quick learner,” Stevenson said. “She has kind of that X factor. I’d love to take credit, but sometimes students like that go through and we help them along, but we know they’re going to be successful.”
Among the courses Graves took was Music Business, where students analyze trends in the music industry, learn about different avenues to publish their work and talk about ways to promote music. Additionally, students learn how to read and analyze contracts and how to conduct themselves in a professional environment, so they know what’s going to happen next. Skills like these have surely assisted Graves as she’s become immersed in the music business.
“She had to go through the whole process where she was involved in the marketing and advertising of the gold record. She had that experience on kind of the microscopic level at Elon,” Stevenson said.
Overall, courses in both the creative and business aspects of the industry helped Graves reach gold record status and become a successful member of the Thrive Music record label in Los Angeles. You can listen to “Do It To It” on iTunes or Spotify.
Alumni Awards & Recognitions Careers & Outcomes

Sophia Robinson left her hometown in North Carolina to begin her year in the Dominican Republic as a fellow at Yspaniola, working to provide high-quality education programs to local children.
As marketing manager for the Thrive Music label, Graves worked to help make the ACRAZE track “Do It To It” a worldwide hit.
The Distinguished Leadership Lecture Series presented by The Joseph M. Bryan Foundation returns to the Carolina Theatre in Greensboro this year with Dan Abrams of ABC News, Sunny Hostin of The View, and Shannon Bream of FOX News.
The article tells the story of Valko’s personal connection to the disease and what she is doing to raise money for the fight against it.
Get more Elon news delivered to your inbox.


Loading
© 2022 Elon University | All Rights Reserved

source

Smells like queen spirit: How local perfumery For Strange Women trapped your scent – Kansas City Pitch

support us
Extras
Social Media

Courtesy For Strange Women
An intermingling of cool days between warm remnants of a Midwest September conjures memories of damp earth beneath fallen leaves and smoky, sweet marshmallows over a crackling wood fire. 
The same could be said about For Strange Women’s perfumes. Meticulously crafted and poetically described for their predominantly online clientele, Kansas City’s women-owned and gender-neutral indie perfume brand illuminates landscapes and atmospheres buried deep within the subconscious. 
When Jill McKeever conceived For Strange Women almost 14 years ago, perfume creation served as an antidote to the burnout she’d experienced in film and music production.
“I was able to go in every direction, and it fit together instead of dead-ending. It was an expression of everything I liked. You just never know what’s going to stick sometimes,” McKeever says. 
What started as a solo Etsy endeavor has grown into a three-woman business with a loyal online following, and, more recently, a public storefront in the Crossroads. Within a few months of starting For Strange Women, McKeever accepted that in-house production would require a few more hands. For a while, she relied on seasonal assistants, and a few stuck around. Tara Milleville—head of production and order fulfillment—handles the tape gun with frightening efficiency. “Tara has been quite consistent…she’s the boss now,”  McKeever says. 
Ash Miyagawa—illustrator and designer currently based in Chicago—assists McKeever with the brand’s delicate and timeless designs. McKeever discovered Miyagawa while she studied at the Kansas City Art Institute. She was working across the street at Oracle KC, as well as Lulu’s and Mildred’s, and McKeever assumed she was three different people. 
“She still works the same way,” Milleville chimes in while packing orders. “She still does the work of four people.”
McKeever’s reluctance to expand has been conscientious. She has rejected opportunities to sell to larger companies, such as Urban Outfitters, to preserve the quality of her product and brand. The only way to navigate natural ingredients is by minimizing their scale. For Strange Women perfumes use essential oils, resins, and plant extracts, and these supplies are vulnerable to weather, war, and other disruptions.
“And if something is not possible to make, we discontinue that perfume—or several—and replace them with blends that we know we can sustain longer,” McKeever says. “There are a few European and Japanese manufacturers that make the best products on the market for natural and synthetic ingredients, and that’s kind of it.”
Whereas lavender is extremely accessible because it’s easily grown and easily distilled, an attar—commonly presented as rose or jasmine—requires several days of cooking in a pot with sandalwood and is therefore more difficult to come by. So how does McKeever decide on ingredients? Much like her start-up days, her process remains highly experimental. 
“I have a catalog of scents in my mind. I work with between 200 and 300 scents. There are themes. I remember how they all smell and how they interact with others,” says McKeever, who claims to have synesthesia.
For Strange Women’s site encourages clientele to accustom themselves to a thematic understanding of scents, too. Patrons can choose fragrances based on season, scent profile, and feeling, such as “healing/grounded” or “seductive/obsessed.” And for those of us seeking a more straightforward guide to our perfect scent, the site features a quiz designed to do just that.
“Most of my perfumes are a nostalgic reference to something I miss or remember in my life–experiences I’ve had or places I’ve been,” McKeever says.  
Every month, in alignment with the new moon, McKeever creates a new scent. Her most recent is called “1993,” which interweaves amber with spice and patchouli. It’s earthy and playful, with top notes of sweet resins. The melange evokes images of album covers and sepia tones from advertisements from the ‘90s. “That one’s a little weirder; it’s not as concrete or literal as some of my other scents,” McKeever says.
Nonetheless, Milleville wore a test batch of “1993” out, and a 40-something-year-old passerby asked, “Who smells like high school?”
“Winter Kitty,” one of For Strange Women’s earlier scents, is described online as “the scent of a house cat returning from a winter walk with chimney smoke and brisk air captured in their fur.” 
McKeever’s fragrances often emulate the natural: forest, mountains, or the ocean. She seeks to attune individuals to the subtleties of the earth. She has three gardens at home for vegetable, medicine, and aromatic purposes. She advocates for cultivating a relationship with plants and learning to recognize how they communicate their needs.
“If you don’t have a connection with nature, you’re not going to respect it,” she says. “I’m not Wiccan, but there are a lot of Pagan principles at work in what I do.”
For Strange Women’s scents are available as solids and lip balms, as well as oils. Additionally, the shop carries essential oils, elixirs, candles, and incense. And if you’re absolutely enraptured by a particular scent, decorative amulets allow infinite accessibility.
Three women who capture the wild spirits of the earth in the form of elixirs and perfumes? To answer your burning question: no, they are not witches. 
For Strange Women
115 West 18th Street, Suite 107
Kansas City, MO 64108 
Open Tuesday and Thursday from 10 a.m. – 2 p.m. and Friday from 10 a.m. to 4 p.m.
 
 
Get the latest from The Pitch delivered directly to your inbox.
Subscribe
© 2022 The Pitch.

source

WSU special education online master's ranks top in the Pacific Northwest – WSU Insider – WSU News

The WSU College of Education’s special education program has been ranked by University HQ as the best in the Pacific Northwest.
Based on a methodology that includes cost, competitive admission, retention, graduation time frame, and expected salary, among other categories, the special education program at WSU came in at 22nd nationally. Among Pac-12 institutions, WSU trailed only the University of Arizona and Arizona State University.  
With a focus on renowned faculty, course offerings, and adaptability, the program does a good job of accommodating students wherever they’re located while still offering top-flight faculty, according to Marcus Poppen, an associate professor of special education at WSU
“Students can expect to be paired with one of our many nationally recognized faculty for advising, mentoring, and professional opportunities,” said Poppen. “Additionally, all of our courses are offered at least once a year and are available online through WSU Global Campus, which makes our program flexible and accessible to full-time professionals who want to earn an endorsement and an advanced degree.”
“…all of our courses are offered at least once a year and are available online through WSU Global Campus, which makes our program flexible and accessible to full‑time professionals…”
Poppen said while the program includes traditional educational and research foundations, it has more modern specialized courses that align with the diverse roles and responsibilities of today’s special educators.
“We are a diversity and equity-focused program, and students can be expected to reflect deeply on their beliefs and attitudes about education and opportunities for people with disabilities,” he said. “They can also expect to be guided to question the status quo so as to advance equity, access, and inclusion for all.”
A key component of the online program is the capstone that Poppen said could include developing a student or family resource guide, researching informed intervention or curriculum, or a professional development package for current or future colleagues.
“I’ve found this to really be a highlight of our students experience in our program, which allows them to dive a little deeper into a content area they think will be relevant for their future work,” he said. “There have been times these capstone projects have been published and led to a passion for research and scholarship in the field.”
Poppen said this process prepares educators to quickly make a difference, especially sinceschools throughout the region are experiencing unprecedented labor shortages. He said specialized positions are disproportionately affected, precipitating the need to develop a stronger special education workforce.
This is a particularly salient issue among those providing services to students eligible for special education, according to Poppen.
“While people working in schools are doing everything, they can do to provide a quality educational experience for our students, these staffing shortages are making it increasingly difficult to do so,” he said. “Now more than ever, we need to invest in and develop a strong workforce of educators who can support all students, including those who are eligible to receive special education services.”
University HQ is an information clearinghouse on colleges, entrance requirements, and career paths.
The award was instituted this year as a way to recognize young professionals who are making a difference in their own programs and contributing to a stronger national association.
The award was instituted this year as a way to recognize young professionals who are making a difference in their own programs and contributing to a stronger national association.
University leaders, health care personnel, and community members gathered for the unveiling of the future home of the Elson S. Floyd College of Medicine’s new Family Medicine Residency program within Pullman Regional Hospital.
More than 125 faculty and staff gathered for the WSU Public Health Rural, Remote, and Underserved Research Symposium, exploring the vast array of research activities occurring on public health topics across the WSU system.
The salary increase for faculty, administrative professionals, and graduate assistants went into effect Sept. 1.
In honor of National Hispanic Heritage Month, events ranging from cultural celebrations to panel discussions are taking place across the WSU System.
The Zurn 150 combines came to WSU thanks to the Washington Grain Commission, which approved the nearly $500,000 gift in 2021.
Subscribe to WSU Insider to receive free daily updates by email. University employees are automatically subscribed—no sign up is necessary.
The award was instituted this year as a way to recognize young professionals who are making a difference in their own programs and contributing to a stronger national association.
The Princeton Review ranked WSU No. 6 for best student support and counseling services, No. 13 for best health services, No. 24 for best campus food, and No. 8 for best quality of life.

source

Production Coordinator – IndigenousX

UNIFIED Music Group
Full-time
Melbourne, Australia, or Los Angeles, USA
Where music’s future is unfolding with unlimited potential. UNIFIED Music Group is the soundtrack of good people working together to achieve extraordinary results.
We are a globally renowned multi-service music company, providing a range of services including artist management, recorded music, publishing, live events and merchandise to a diverse roster of local and international artists.
With offices in Sydney, Melbourne, Los Angeles, London and Toronto our team is global and so are the opportunities for new talent and seasoned executives within the business. Career progression within UNIFIED isn’t rare, it’s expected. If you grow, we do too. At UNIFIED, you will work with some of the biggest Australian and international acts on the world stage. They partner with us to build their careers, while we help you build yours.
Job Description
UNIFIED Music Group is seeking a Production Manager to be based in either our Melbourne or LA office. This role will assist the Recorded Music division in Production services across the board, facilitating the growth and expansion of a fast-growing Independent Label. This role reports to the General Manager, UNIFIED Recorded Music.
Key Tasks
Responsibilities include:
– Maintain and coordinate the successful delivery of UNIFIED Recorded Music products to our CD, Vinyl and Digital supply chain partners in the US, UK and AU.
– Communicate deadlines, quotes, templates and more to Product Managers + troubleshoot problems and delays as they arise
– Upload and schedule physical and digital releases with distributor as assigned
– Manage global inventory across D2C and Retail warehouses, troubleshooting shipping and supply chain issues
– Ingest content data in RightsHub, PPCA, Nightlife, Mood Media, Play Network and all other 3rd party PRO and delivery platforms
– Work with Legal, Business Affairs and Royalties teams to manage flow of data and information required
– Actively participate in team meetings, discussions, and planning activities
– Submit invoices with proper coding and track expenses
– Other duties as assigned
This role will also include the opportunity to:
– Foster close, positive relationships with our artists and managers
– Develop creative packaging alongside artists, Product Management and Art Department teams
– Learn how decisions in production can influence sales and use this data to influence decisions
– Work closely with a wide range of departments including marketing, sales, product management, and finance
The perfect candidate will have:
– Minimum three years of digital and physical music production experience
– Meticulous attention to detail and extremely well-organized work habits
– Outstanding written and verbal communication skills
– Passion, drive, and proactivity
– Poise, confidence, and talent to work on several projects simultaneously all at the highest level of quality
– Natural sense of urgency
– Strong self-motivation and the ability to thrive with a bit of autonomy
– Strong Computer Skills – Proficient in Word, Excel, Outlook, Dropbox
Why work with us?
Guided by our deep passion for music, artists and the independent music community, we lead a professional, innovative and motivated team to achieve those extraordinary results. Our culture is collaborative, flexible, inclusive and diverse. We care deeply about our people, and the legacy we are creating for the next generation.
We believe in building a workplace that works for you. Some of the benefits that our people enjoy are:
Additional Annual Leave. A total of 5 weeks including:
– Your birthday – Happy Birthday!
– A company-wide tools-down for R U OK Day
– Extra Holiday Leave – three extra days to take over the Holiday period
Flexible working from home arrangements and flexible work hours that work for you
Paid Parental Leave. At least 2 weeks for birth, non-birthing and adoptive/foster parents to support the growth of your family
The opportunity to take part in the UNIFIED Leadership Program and other training and support initiatives
Access to the Employee Assistance Program to care for your wellbeing, all year round
Benefits from the UNIFIED Perks Program. Partner discounts and access to tickets for some of the best concerts and festivals in Australia
Contribution to the UNIFIED Impact Committee to ensure we make positive, meaningful, and sustainable change in the world
EQUAL OPPORTUNITY AND DIVERSITY, EQUITY & INCLUSION
UNIFIED Music Group would like to acknowledge the Wurundjeri, Gadigal & Boon Wurrung people of the Kulin & Eora nations, and recognise their continuing connection to the Country on which we work from and are present on. We also pay our respects to First Nations Elders past and present, and continue to embrace the learnings and culture First Nations people so generously share. We pride ourselves on being an equal opportunity employer, with a focus on ensuring that we are engaging with and supporting the local and international communities which are close to the heart of the UNIFIED Music Group Impact Committee.

Your support will ensure IndigenousX is able to stay independent and keep making original content.
"*" indicates required fields

source

Southside Church of Christ and John Stanley, Inc. Celebrate the Groundbreaking of Serenity, a $35 Million Mixed-Use Affordable Rental Homeless Project for Seniors – GlobeNewswire

| Source: John Stanley Inc. John Stanley Inc.
Los Angeles, California, UNITED STATES
LOS ANGELES, Sept. 20, 2022 (GLOBE NEWSWIRE) — On Monday, Sept. 19, Dr. Carl C. Baccus (Pastor) and Chris Baccus of Southside Church of Christ, and Saki S. Middleton, President of John Stanley Inc., announced the groundbreaking of Serenity, a mixed-use 50-unit affordable rental homeless senior project in the City of Los Angeles.
The project is a partnership between John Stanley, Inc. (“John Stanley”), Southside Church of Christ (“Southside”), and Innovative Housing Opportunities (“IHO”). Serenity is a mixed-use 50-unit affordable rental homeless senior project with ground-floor commercial space located on 0.82 acres, the former church parking lot of Southside Church of Christ. The project is a public-private partnership with the City of Los Angeles Housing Department and the Housing Authority of the City of Los Angeles.
PUBLIC-PRIVATE PARTNERSHIP
The City of Los Angeles Housing Department provided a $9.22 Million Proposition HHH Supportive Housing Loan and issued $19,910,000 in Tax Exempt and Taxable Bonds funded through R4 Capital Funding LLC and privately placed with Western Alliance Bank and $12,647,000 in LIHTC equity provided by R4 Capital LLC for the construction of the project and the Housing Authority of the City of Los Angeles is providing 36 Project-Based Vouchers for Chronically Homeless and Homeless Seniors. The project will serve 18 chronically homeless and 18 homeless seniors, and 14 non-homeless independent senior households.
“This is a true public-private partnership,” said Saki Middleton, President of John Stanley Inc. “The continued support from Councilman Marqueece Harris-Dawson has led to a $9 Million Proposition HHH Supportive Housing Loan and the 36 Project-Based Vouchers from the Housing Authority of the City of Los Angeles, which is key to this project moving forward. It will provide homeless seniors with permanent housing and supportive services, which will enhance their lives and improve the quality of the neighborhood.”
“Such a long-awaited development, we are so grateful to God, the church members, community, and the city for joining us in providing quality housing and services in the neighborhood,” said Dr. Carl C. Baccus, Pastor of Southside Church of Christ.
“To whom much is given, much is required. We are thankful God gave us this opportunity to give to others with this project. We look forward to continuing to serve our community,” said Chris Baccus, Executive Director of Concerned Citizens Community Involvement.
“Innovative Housing Opportunities is proud to be part of the solution to create more affordable housing for all seniors,” said Rochelle Mills, President and CEO of Innovative Housing Opportunities. “It’s imperative that all of us address this growing population with homes that are healthy, beautiful, and safe.”
ABOUT THE PROJECT
Designed by Withee Malcolm Architects, the mixed-use 50-unit affordable rental homeless project will consist of one five-story building comprised of 50 studio and one-bedroom senior units, 1,600 square feet of ground-floor commercial space, and two levels of podium parking located on 0.82 acres. The project is being built on Southside Church of Christ’s parking lot, and development includes the replacement of the church parking.
The project will have 20 studio/one-bath and 30 one-bedroom/one-bath units and 1,785 square feet of ground-floor commercial space. Amenities will include a third-level outdoor courtyard that includes a BBQ area, sitting areas, and 1,500 square feet of indoor community space that includes a lounge, kitchen, flex room, and computer/classroom. The project also has a fourth-floor gym, a third-floor laundry facility, and parking for the residents. The units will serve homeless senior and independent senior households 55 years and older whose annual household incomes are at or below 60% of the Los Angeles County area median income.
ABOUT JOHN STANLEY
Founded by Saki Middleton, John Stanley is a private real estate development company focused on the new construction, acquisition, and rehabilitation of affordable and market-rate mixed-use/mixed-income multifamily properties throughout the U.S. John Stanley currently owns 12,000 residential units and has 1,200 mixed-use, affordable and mixed-income residential units under development. John Stanley has a wide range of partnerships, which include public-private partnerships with municipalities, private equity firms, faith-based organizations, and nonprofits throughout the U.S. Visit www.johnstanleyinc.com.
ABOUT SOUTHSIDE CHURCH OF CHRIST/CCCI
Dr. Carl Baccus has ministered at Southside Church of Christ since 1956. In 1980, Dr. Baccus built the church himself as the general contractor. In 1978, Dr. Baccus and their members founded Concerned Citizens Community Involvement (CCCI), a nonprofit corporation for the improvement of health, education, and well-being of South LA and the broader community. CCCI provides youth programming, food programs, health seminars, and STEM training, including an internationally recognized robotics program, and has partnerships with Los Angeles Unified School District, Inglewood Unified, and the Housing Authority of the City of Los Angeles. In 2005, Chris Baccus was appointed as the Executive Director to carry the legacy of his late mother Gerri with the goal of providing housing as the next step in the mission.
ABOUT INNOVATIVE HOUSING OPPORTUNITIES
The mission of Innovative Housing Opportunities (IHO) is to enrich communities by providing high-quality, affordable housing where residents can thrive, develop healthy habits, and achieve success and stability. IHO’s California development portfolio provides housing to a wide variety of residents, including seniors, families, foster youth, veterans, those living with mental illness, formerly homeless, developmentally disabled, and other special needs and mixed populations. Formed in 1976 to help business and government address the lack of low- to moderate-income housing in the City of Irvine, IHO is now working throughout California in strategic partnerships that creatively and effectively maximize efficiencies while achieving the most attractive and well-managed environments for residents and for the surrounding communities.
PR Contact
[email protected]
Contact Information:
Jennifer Buonantony
CEO, PPLA Agency
[email protected]
323-496-1976

This content was issued through the press release distribution service at Newswire.com.

source

Stock market news live updates: Stocks gain for a second straight day as rebound continues – Yahoo Finance

U.S. stocks rose for a second straight session Thursday after swinging between gains and losses for much of the trading day.
[Click here to read what’s moving markets on Friday, Sept. 9]
The S&P 500 climbed 0.7%, and Dow Jones Industrial Average and technology-heavy Nasdaq Composite each advanced 0.6%.
All eyes were on Federal Reserve Chair Powell Thursday as he spoke at the Cato Institute’s 40th Annual Monetary Conference in Washington D.C. The U.S. central bank chief reasserted the Fed’s commitment to fighting inflation but remained hopeful the endeavor can be done without the “very high social costs” of monetary tightening.
The appearance marked Powell’s final public remarks before the Fed’s next policy announcement September 21.
Thursday’s seesaw session comes after the S&P 500 surged 1.8% Wednesday, the Dow Jones Industrial Average about 1.4%, and the Nasdaq Composite 2.1% – snapping a seven-day streak of declines and notching its biggest jump in four weeks.
On the economic data front, initial jobless claims fell to the lowest reading since May. Filings for first-time unemployment insurance totaled 222,000 in the week ended Sept. 3, the Labor Department said Thursday. Economists called for 240,00 claims, according to consensus estimates compiled by Bloomberg.
Across the Atlantic, the European Central Bank delivered an unprecedented 75 basis point interest rate hike and signaled further increases after inflation in the eurozone hit a new record high.
The increase came just two weeks before the Federal Reserve is poised to raise interest rates in the U.S. by 0.75% for the third consecutive time. Some market participants had hoped that policymakers would slow the pace of their rate-hiking campaign this fall, but strong economic data on the labor and manufacturing fronts have tempered those expectations.
CME Group’s Fedwatch tool reflects expectations for a bump of three quarters of a percentage at about 86%, up from 69% one week ago.
A flurry of Wall Street institutions have also raised their bets on a 75-basis-point hike this month including Bank of America, Goldman Sachs, and Nomura.
Shares of GameStop (GME) were ripped 7.5% higher after the meme-stock darling announced a partnership with crypto platform FTX late Wednesday. The video-game retailer also reported second-quarter earnings that showed losses widened to $108.7 million while sales declined 4% from a year ago to $1.14 billion.
American Eagle Outfitters (AEO) shares tanked 8.8% after the company missed on earnings, paused its quarterly dividend, and warned “demand trends remain difficult” in the current quarter.
In commodity markets, oil prices nudged 1% higher after settling at a fresh seven-month low on Wednesday.
—
Alexandra Semenova is a reporter for Yahoo Finance. Follow her on Twitter @alexandraandnyc
Click here for the latest trending stock tickers of the Yahoo Finance platform
Click here for the latest stock market news and in-depth analysis, including events that move stocks
Read the latest financial and business news from Yahoo Finance
Download the Yahoo Finance app for Apple or Android
Follow Yahoo Finance on Twitter, Facebook, Instagram, Flipboard, LinkedIn, and YouTube
Related Quotes
On Wednesday, the Fed bumped up interest rates again, its third 75-basis point hike since June, and signaled that there could be two more such hikes by the end of this year. The conventional wisdom has the Fed acting properly, and aggressively, in an attempt to counter inflation raging at 40-year high levels. But conventional wisdom isn’t always right – and we can learn a lot by consulting the contrarians. Few top investors are more contrarian than Cathie Wood. The founder and manager of ARK Inv
KEY WORDS “I think we’re giving Powell too much praise. … The last two years are one of the biggest policy mistakes in the 110-year history of the Fed by staying so easy when everything was booming.
You have just a few weeks to pounce on Treasury I bonds' sky-high interest rate. Also called Series I savings bonds, their interest rate is 9.62%.
Homeowners beware. But don't panic, either.
And what it means for your wealth-building options.
The shipping company has developed a reputation as one of the best dividend stocks around
“We printed up too much money, and just thought the party would never end,” Icahn said, adding that with the Fed raising rates to fight inflation, "the party's over."
In this article, we will look at the 4 stocks billionaire Leon Cooperman is talking about right now. If you want to skip reading about Leon Cooperman, his investment career, and his stock-picking strategy, you can go directly to Billionaire Leon Cooperman is Talking About These 2 Stocks. Leon Cooperman’s Investment Career Leon Cooperman is […]
Multiple insiders secured a larger position in Intel Corporation ( NASDAQ:INTC ) shares over the last 12 months. This…
Novavax, Inc. stock is trending on the Yahoo Finance Platform. Here is a visualization of $NVAX performance over time, how that performance compares to the wider industry, and analyst projections for the current quarter.Check out the ticker page here.
Warren Buffett’s long-term investment strategy has proven to be successful through virtually all market conditions over the past several decades – recession, high inflation and deflation. If there’s one thing that’s made Buffett one of the most successful investors in history, it’s his commitment to his strategy. A countless number of new investment techniques and algorithms have come and gone over the years, but Buffett has maintained his relatively simple strategy of picking solid companies an
As much as stocks are falling, moves in another financial market have even more profound implications for the global economy.
Yahoo Finance's Jared Blikre joins the Live show to check out market and sector losses amid today's sell-off, while also looking at meme stocks and the travel industrial.
See who joins GOOGL and MSFT on this screen of Warren Buffett stocks based on the investing strategy of Berkshire Hathaway's CEO.
Goldman finally decided to stop fighting the Fed and no longer sees the index finishing the year at 4300.
Boise, Idaho; Philadelphia; Pensacola, Fla.; Austin; and Reno, Nev.; Minnesota; and Utah are the housing markets with the most buyer pullback, says one home builder.
These stocks have been mauled by the bear market, but a look under the hood reveals impressive growth.
(Bloomberg) — Options traders spooked by turmoil across Wall Street snapped up protection against further losses in stocks at the fastest pace on record.Most Read from BloombergBank of England Says Paper Banknotes Only Good for One More WeekRisk Assets Crushed With Few Signs Drama Is Over: Markets WrapLarry Summers Warns Pound May Tumble Below $1 on ‘Naive’ UK PoliciesJapan to Restore Visa-Free Travel From Oct. 11 as Covid Pandemic Recedes Liz Truss’s Historic Gamble With the UK Economy Is Alre
It's Friday morning — two days after the Federal Reserve raised interest rates 0.75%, and one day after seemingly every other central bank in the world followed suit, according to The Wall Street Journal — and oil stocks are tanking. As of 9:50 a.m. ET, shares of oil company Occidental Petroleum (NYSE: OXY) are down 5.6%, while industry bellwether ExxonMobil (NYSE: XOM) is down a solid 6%, and refiner Phillips 66 (NYSE: PSX) is leading the pack lower with a 6.7% loss.
Global semiconductor manufacturer On Semiconductor Corp. (Onsemi) is offloading nearly 300,000 square feet of office and manufacturing space as it moves some roles out of the Bay Area and centralizes local operations in a smaller facility in San Jose. Onsemi (Nasdaq: ON) plans to vacate about 290,000 square feet of space it currently occupies in three facilities in Sunnyvale, Santa Clara and San Jose. This summer it signed a 15-year lease for a full building of 92,448 square feet at 110-180 Rose Orchard Way in San Jose, where it plans to shift roles that aren't moving to facilities in Arizona closer to its headquarters in Phoenix.

source

Stevie Nicks Releases Cover of Buffalo Springfield Classic 'For What It's Worth' – Icon Vs. Icon

The Source For All Things Pop Culture
Stevie Nicks has released her signature take on Buffalo Springfield’s timeless protest song “For What It’s Worth” today as a digital download and streaming single. A Dolby Atmos mix of the track is also available now on all platforms that support the format. — Listen Here!
The two-time Rock and Roll Hall of Famer recently added the song live to her setlist earlier this month as part of her ongoing U.S. tour, which will continue through late October. Singer-songwriter Vanessa Carlton will open for Nicks during the tour. Tickets are on sale now.

Nicks recorded “For What It’s Worth” earlier this year in Los Angeles. On the track, she’s joined by two longtime members of her touring band.  The first is backing vocalist Sharon Celani, who began recording and performing with Nicks in 1978. The other is renown guitarist Waddy Wachtel. His connection to Nicks goes back to 1973, when he played on Buckingham Nicks. Since then, Wachtel has appeared on all of Nicks’ solo studio albums. Grammy®-Award winner Greg Kurstin produced the single while also playing multiple instruments, including drums, organ, and guitar.
Nicks shared her thoughts on the track on her socials earlier this week.

During her current tour, Nicks is performing “For What It’s Worth” along with a mix of hit songs from her solo albums (“Edge Of Seventeen,” “Stand Back,” and “Soldier’s Angel”) and classic tracks from her tenure with Fleetwood Mac (“Rhiannon,” “Dreams,” and “Landslide.”)
“For What It’s Worth” was a Top 10 hit for Buffalo Springfield in 1966. Stephen Stills wrote the song in response to the November 1966 Sunset Strip curfew riots in Los Angeles. When the song was released a month later, it was quickly adopted by groups who were protesting the escalating war in Vietnam. Today, the song has become one of the best-known protest songs ever written, evocative of 1960’s counterculture while also being continually relevant to modern life as well.
STEVIE NICKS 2022 TOUR DATES 
September 24     Bridgeport, CT         Sound on Sound Festival *
September 30    Dana Point, CA         Ohana Festival *
October 3         Los Angeles, CA         Hollywood Bowl
October 6        Phoenix, AZ             Ak-Chin Pavilion
October 9         The Woodlands, TX     Cynthia Woods Mitchell Pavilion
October 12         Alpharetta, GA        Ameris Bank Amphitheatre
October 16        Nashville, TN         Ascend Amphitheater
October 19         Charleston, SC         CreditOne Stadium
October 22         Charlotte, NC         PNC Music Pavilion
October 25         Tampa, FL             MIDFLORIDA Credit Union Amphitheatre
October 28         West Palm Beach, FL     iTHINK Financial Amphitheatre
 
* Festival Date
 
Jason Price founded the mighty Icon Vs. Icon more than a decade ago. Along the way, he’s assembled an amazing group of like-minded individuals to spread the word on some of the most unique people and projects on the pop culture landscape.

source

‹ Previous Next ›