Blog

Man quits boring 9-5 job to work with stars as a music producer – Manchester Evening News

Man quits boring 9-5 job to work with stars as a music producer  Manchester Evening News
source

Motor Mountain Masters at Jennerstown Speedway: TV channel, live stream, schedule, more for 2022 – NASCAR

In just a few years, the Motor Mountain Masters has become one of the most cherished and anticipated events at Jennerstown Speedway.
With a storied history that dates all the way back to the 1920s, Jennerstown track operator Bill Hribar and his staff sought to create an event that honored all the traditions and individuals that have made the facility one of the most prestigious in the Northeast, which led to the inception of the Motor Mountain Masters in 2018.
RELATED: Watch the Motor Mountain Masters on FloRacing
Not only does the winner of the Motor Mountain Masters receive a $10,000 paycheck, but they also have the privilege of adorning a crimson jacket that is a tribute to the green jacket worn by the champions of The Masters at the Augusta National Golf Club.
The drivers determined to take home a crimson jacket in this year’s Motor Mountain Masters consist of the local track heroes along with a healthy group of outsiders, all of whom are looking to add to the growing history of the event.
Below is everything you need to know about the Motor Mountain Masters at Jennerstown Speedway.
What TV Channel is the Motor Mountain Masters at Jennerstown Speedway on?
All the on-track action for the Motor Mountain Masters can be viewed live on FloRacing, the official streaming home for all NASCAR Roots properties
The event will not be shown on a television network.
Below is the complete schedule for FloRacing’s coverage of the Motor Mountain Masters.
Complete schedule for the Motor Mountain Masters
This year’s Motor Mountain Masters will take place on Saturday, Aug. 6.
Three different divisions encompass the on-track action for the Motor Mountain Masters, which includes features for Jennerstown’s Pro Stock and Modified divisions. Wrapping up the night will be the 150-lap Super Late Model feature.
Below is the complete race-day schedule at Jennerstown Speedway.
Official format for the Motor Mountain Masters
Saturday’s Motor Mountain Masters will be divided into three segments.
At the end of each segment, there will be a competition caution that lasts five minutes and teams will be allowed to make any adjustments to their cars or change tires. Only six tires will be allotted to Super Late Model teams for the Motor Mountain Masters.
Caution laps are not counted during the 150-lap Super Late Model feature. The first driver who is one lap down will receive a free pass during each caution flag except for the competition cautions.
Below is a breakdown of the segments for the Motor Mountain Masters.
Motor Mountain Masters entry list 
The current entry list for the Motor Mountain Masters features 26 cars.
Headlining this group is Super Late Model standout and part-time NASCAR Xfinity Series competitor Derek Griffith. Nobody could touch Griffith in last year’s Motor Mountain Masters, as he led 139 of the 150 laps to claim the crimson jacket for himself.
Griffith will have plenty of strong competition to deal with to defend his win on Saturday evening. One of the heavy-hitters standing in Griffith’s way is current Jennerstown points leader Barry Awtey, a six-time track champion who won the inaugural Motor Mountain Masters in 2018.
Other notable names on the entry list include 2014 ACT Late Model Tour champion Joey Polewarczyk Jr., former NASCAR Camping World Truck Series driver Cale Gale and Eddie MacDonald, who has tallied seven victories in what is now the ARCA Menards Series East.
Below is the complete entry list for Saturday’s Motor Mountain Masters
Motor Mountain Masters history, winners
Each edition of the Motor Mountain Masters has been won by a different driver.
Along with Awtey and Griffith, Todd Stone and Mike Hopkins have both had the privilege of celebrating in Victory Lane at the end of the Motor Mountain Masters, with all four competitors hailing from the Northeast.
Stone is the only past winner not entered in this year’s event, which puts Awtey, Hopkins and Griffith in an ideal but challenging position to become the first repeat champion of the Motor Mountain Masters in the event’s fifth year.
The crimson jacket has a strong chance of staying in the Northeast with 70 percent of the entry list hailing from the region, but the battle for the prestigious trophy is expected to be intense through all 150 laps on Saturday evening.
Below is the complete list of winners in the Motor Mountain Masters.

NASCAR® and its marks are trademarks of the National Association for Stock Car Auto Racing, LLC. All other trademarks are the property of their respective owners.

Copyright © 2022 NASCAR Digital Media, LLC. All rights reserved.

source

Review: PreSonus Revelator io44 – Mixdown

With the rise of streaming, podcasting, and the demand for more affordable and portable audio equipment, more and more we are seeing hardware geared towards this market, and the PreSonus Revelator io44 is one of these devices. 
Designed with live streamers in mind, the Revelator io44 is an excellent choice for an interface for streaming, podcasting, or music production. Its small form factor and solid construction makes it ideal for both permanent and portable studios, with built-in DSP processing helping to alleviate the taxing nature of audio processing software. 
Read more gear reviews here.
While the Revelator io44 is primarily targeted at live streamers, it is just as applicable in a musical context. It is especially handy for musicians on the go or working with limited space. The interface has a single mic/instrument combo input, a TRRS input for headphones that will also allow recording from a headset mics – especially good for gaming and streaming – as well as a TRS line input for recording phones, MP3 players, DJ mixers, and anything else with a line level stereo output. Everything you may need from a small, portable interface. 
Bundled with the unit are integrated DSP effects, for real time processing of incoming signals which are of high quality and didn’t affect recording latency to any noticeable degree when testing. The internal DSP processing frees up your computer’s processing power, allowing for smoother operation of other programs, whether that be other plugins, streaming software, or CPU intensive video games.
Included are EQs, compressors, limiters, reverbs, delays, and a range of vocal effects. The Universal Control software, which comes as a free download from the PreSonus website, allows you to easily control these parameters and save them with up to six user presets, with a further eight premade presets. A nice touch which permits those both familiar and unfamiliar in advanced audio processing, to get a clean, professional-sounding recording right out of the box. Presets can also be saved and shared among other Revelator users, meaning there are no lack of presets for any situation or context. 

Setting up and using the Revelator was a very easy process. After downloading the Universal Control software, it was as simple as plugging the interface into the computer. The interface and the software instantly started working as intended. Immediately, we had signal through the device, Universal Control and Ableton, the DAW we used for our tests. The signal was clear thanks to the XMAX-L digital preamps, which provide low noise and lots of headroom. The interface allows for recording up to 96kHz at 24 bits for high quality and professional-sounding recordings. 
From our tests, the factory presets did a great job of cleaning up the signal and reducing noise, giving us an instantaneously professional-sounding recording. When using a gaming headset with a built-in mic and one of the built-in presets, the clarity of the signal was significantly improved while minimising hums, hisses, and pops. When testing with a single coil Fender Strat, the ‘electric guitar’ preset did an excellent job rolling off that infamous single coil hum, while still maintaining the sonic characteristics of the instruments.  
On the device there are a range of tactile features. A small OLED screen provides crucial information and navigation of the features of the interface. It is controlled with a single rotary button that scrolls through different parameters and allows you to set these parameters to your needs. Also included are a pair of ‘preset’ buttons that toggle between two predetermined presets with just the press of a button. Allowing you to recall your favourite channel presets with the press of a button. 

Another useful feature of the io44 is the loopback functionality. This allows for the recording of computer audio, whether that be video games, videos, or music, onto a seperate channel within the interface and into your recording software. Having individual recordings of each element makes the editing and balancing of sources much easier during post production, while also streamlining adjustments to levels during real-time performances, such as live streams, as all audio sources are monitored within the same location. Level adjustments are able to be made from both the device and within the Universal Control software.
Included with the interface is the Studio One Artist software, PreSonus’ proprietary digital audio workstation, meaning that those who purchase the Revelator io44 will immediately have access to a tracking and editing software. Also included is the Studio Magic bundle, which compiles a range of VST plugins for deeper editing and processing options during post production.
The Presonus Revelator io44 audio interface is an excellent choice for those looking to get into streaming, podcasting, or wanting to take their studio on the go. The small footprint and solid build lends itself to those who do a lot of travelling or those who don’t have much home studio space to work with. The ease of use is great for streamers and podcasters who may not have extensive knowledge of audio processing, with a range of presets providing professional recording options with the press of a button. 
It also appeals to the seasoned musician and producer, with an array of effects and deeper editing parameters to really dial in that desired sound. Not to mention the included Studio One and Studio Magic software, the Revelator aims to provide everything you need to get started in either streaming, podcasting, and music production from the get go!

Head to PreSonus for more information. For local enquiries, reach out to Link Audio.

source

Waveform Free DAW updated for 2022: new features and no annoying restrictions – MusicRadar

MusicRadar is supported by its audience. When you purchase through links on our site, we may earn an affiliate commission. Here’s why you can trust us.
By ( , , ) published
Free music production software is based on the core features of Waveform Pro 12
Already recognised as one of the best free DAWs you can download, Tracktion’s cross-platform Waveform Free has just been updated for 2022.
This latest version of Waveform Free is based on the essential features of Waveform Pro 12, Tracktion’s paid-for DAW, and imposes no restrictions on track counts, exporting/rendering, project saving or use of third-party plugins. It won’t time out, either.
The 2022 edition of Waveform Free includes a completely new browser that enables you to specify tags, favourites and smart lists. 15 of the audio effects have been refreshed, too, and there are now six utility plugins. These include a convert-to-mono tool and a spectrum analyser.
The Actions panel, meanwhile, enables you to favourite your most-used actions and create custom actions for one-click recall.
Check out the video above for an overview of what Waveform Free 2022 is all about, and download it on the Tracktion (opens in new tab) website. It runs on PC, Mac and Linux.
I’m the Group Content Manager for MusicRadar, specialising in all things tech. I previously spent eight years working on our sister magazine, Computer Music. I’ve been playing the piano, gigging in bands and failing to finish tracks at home for more than 30 years, 20 of which I’ve also spent writing about music technology. 
Don’t miss the latest deals, news, reviews, features and tutorials
Thank you for signing up to Musicradar. You will receive a verification email shortly.
There was a problem. Please refresh the page and try again.
MusicRadar is part of Future plc, an international media group and leading digital publisher. Visit our corporate site (opens in new tab).
© Future Publishing Limited Quay House, The Ambury, Bath BA1 1UA. All rights reserved. England and Wales company registration number 2008885.

source

Hoobastank & Lit Announce Co-Headlining 'Tried-N-True' Tour with Alien Ant Farm and Kristopher Roe of The Ataris – Broadway World

Get local news, offers & more…
SoCal alt/rock bands Hoobastank and Lit will be hitting the road this Fall on the co-headlining “Tried-N-True” tour alongside Alien Ant Farm and The Ataris’ vocalist Kristopher Roe. The tour will kick off in Nashville, TN on October 14th and run through mid-November hitting North Carolina, Pennsylvania, New Jersey, South Carolina, Georgia, Florida, and Texas.
VIP packages are also available, including the Tried-N-True VIP Meet & Greet Experience which includes a pre-show hang and photo op with members of Hoobastank, Lit and Alien Ant Farm, one VIP exclusive autographed tour poster, one VIP exclusive merch item, priority entry into the venue and more.
Tickets and VIP packages go on sale this Friday, August 26th. For more details, visit the official band websites of Hoobastank and Lit.
On November 20th, 2021, Hoobastank celebrated 20 years of their self-titled release, Hoobastank. The 2001 album launched the career of the band to mainstream success with huge singles including “Crawling In The Dark”, “Running Away” and “Remember Me”, all of which have since been certified RIAA platinum.
Almost two decades later, the band is still clocking in at over 6M monthly listeners on Spotify and “Crawling In The Dark” has surpassed the 100M streaming mark across DSPs. The band’s 2003 follow up studio album The Reason took them to even greater heights and solidified Hoobastank as a household name.
The title track “The Reason” went 4x RIAA Platinum and racked up quite a few #1 chart positions along the way, while the album went 2x RIAA Platinum. “The Reason” has over 2 Billion streams/views which has helped lead the way to the band’s catalog surpassing the 3 billion mark across the various streaming platforms. The band looks forward to continuing their success in the years to come while also celebrating what they have accomplished so far.
Lit is considered one of the preeminent bands to have come out of the post-grunge era of the late 90’s and helped define an entire generation of SoCal power punk (No Doubt, Blink 182, The Offspring) with hard-charging hits like “My Own Worst Enemy,” “Miserable,” “Zip-Lock” and “Lipstick & Bruises.” The band has released 7 worldwide studio albums, including their RIAA Certified Platinum A Place in the Sun, and their latest release, Tastes Like Gold (Round Hill Records) featuring the new single, “Mouth Shut.”
The band has remained one of the most active bands from that era and still consists of three original and primary members including brothers Ajay (lead vocals) and Jeremy Popoff (lead guitar), and Kevin Baldes (bass) along with new drummer Taylor Carroll.
Their double platinum mega-hit “My Own Worst Enemy” is one of the most broadcasted (255 million streams on Spotify), covered (view here), karaoke’d, recognizable rock hits of the last 20 years and won them a Billboard Music Award for Modern Rock Song of the Year, while their unforgettable video for “Miserable” featuring Pamela Anderson was one of the top 10 most played songs of 2000.

Hoobastank and Lit Co-Headlining Tour Dates

with Alien Ant Farm and Kristopher Roe of The Ataris
October 14 – Nashville, TN – SkyDeck
October 15 – High Point, NC – Ziggy’s Outdoor
October 16 – Bethlehem, PA – Musikfest Café *
October 18 – Morristown, NJ – Mayo PAC
October 20 – Greenville, SC – Peace Concert Hall
October 22 – Sugar Hill, GA – City Event
October 23 – Wilmington, NC – Surf’s Up
October 26 – Tampa, FL – Ritz Ybor
October 27 – Ocala, FL – Reilly Arts Center
October 28 – Ft. Myers, FL – The Ranch
November 2 – Gollad, TX – Schroeder Hall
November 3 – Cypress, TX – Frio Hill Country
November 4 – New Braunfels, TX – Texas Ski Ranch
November 5 – Carrollton, TX – Festival at The Switchyard +
November 6 – Odessa, TX – The Ector Theatre
November 8 – Cedar Park, TX – The Haute Spot
* Alien Ant Farm will not be on this date.
+ Only Hoobastank and Lit
Louis Cole Announces New LP ‘Quality Over Quantity’
The Smithereens to Release ‘The Lost Album’
Tim Burgess Releases New Song ‘Sure Enough’
CLIP Shares ‘HURT U’ Ahead of ‘Perception’ EP
Hot stories

LISTEN: Hear Julie Benko Sing 'People' From FUNNY GIRL on New Album With Jason Yeager Photo

LISTEN: Hear Julie Benko Sing ‘People’ From FUNNY GIRL

Photo: Harry Styles Covers First-Ever Global Rolling Stone Photo

Photo: Harry Styles Covers First-Ever Global Rolling Stone

James and the Shame (Rhett McLaughlin) Shares Single 'Where We're Going' Photo

James and the Shame Shares Single ‘Where We’re Going’

Bonfire Global Releases Viral XO TEAM 'Reason' Photo

Bonfire Global Releases Viral XO TEAM ‘Reason’

LISTEN: Hear Julie Benko Sing ‘People’ From FUNNY GIRL
Photo: Harry Styles Covers First-Ever Global Rolling Stone
James and the Shame Shares Single ‘Where We’re Going’
Bonfire Global Releases Viral XO TEAM ‘Reason’
BroadwayWorld TV


TICKET CENTRAL
News + special offers for Broadway Shows

Recommended for You


Sign-Up for Music News
Follow Us

BWW Sister Sites

Apps

source

Best Tech for Video Editing & Content Creation in Time for Back-to-School – CGMagazine

We are incredibly close to the end of summer and back-to-school shopping is probably well under way for some. For older students, this may mean some fun new peripherals for your computers. This could be content creation tech for a streaming setup for your room or the dorm, a podcast started among new friends or even gear for projects that involve video editing, depending on what you are studying.
It isn’t the most expensive mic on the market and its similar look to the much more expensive Shure SM7B draws a lot of comparison, but the BEACN Mic is still a pricier dynamic microphone with a lot of value. It does all of its processing in the mic itself and its software is a full on stream mixer, allowing you to control your voice, game, chat, music, browser and any other sources you can imagine in one place, a vital part of content creation. 
The Elgato Wave is smaller and has less on-board features than its big brother the Elgato Wave 3—the knob does not control gain or mic/stream balance, only headphone volume—but it is currently half the price of its counterpart and comes with the OG streaming software, Elgato Wavelink. They were the first mic to offer a full stream mixer (in software form) and it comes with every Wave Product. The condenser mic has great sound and a cool look for content creators. 
One of my favourite looking XLR Microphones, the Rode PodMic has an internal pop filter and, as a dynamic mic, is great at eliminating ambient noise. The only caveat is that you need some sort of audio interface to get it on your PC. The PodMic is a great addition to the best tech for video editing and content creation list in time for back-to-school.
A massive leap from its previous version, the Rodecaster Pro II is a full-on recording studio for streaming, podcasting or any other kind of content creation. With nine inputs all attached to faders (be they physical or virtual), including four Hybrid XLR/Line In jacks and two USB-C connections, you have an unlimited amount of use cases for this device, making it a perfect piece of tech for video editing and content creation.
I know. It isn’t exactly cheap, but relative to most audio interfaces, it is a value pick for sure. It provides you physical control over your audio with the same software as the BEACN Mic, meaning you can control any USB Microphones (yes, multiple) alongside every other available source for streaming, a must have for video editing and content creation.
The Elgato Wave XLR is comparable in price to the BEACN Mix Create, but offers the best of multiple worlds by giving you the software solution offered by USB Microphones (the aforementioned Elgato Wavelink software), but allowing you to bring in your favourite XLR Microphone.
This is but a mere example of the dominance of mirrorless/DSLR cameras when it comes to making you look good. There are a bevy of options out there for that range anywhere $750+ that would have a gigantic advantage over any webcam on the market. The Sony A7 IV can output 4K/60FPS, has a gorgeous picture and has numerous upgrades compared to its Sony Alpha predecessors. It is a camera that will be upgrade-proof for sometime to come. 
The Elgato Facecam is a much more affordable option than any full-on camera, minus the need for a capture card gives this camera a lot of value. What gives it more value is the same thing that virtually every Elgato product offers: the software. Elgato’s Camera Hub gives you a level of control akin to a mirrorless camera, allowing you to change shutter speed and so much more in a way that just doesn’t exist for other webcams. Its 1080p/60fps resolution is more than sufficient for the average content creator. 
This smart webcam can follow you as you move, making it an ideal multi-use device. You can set it up as a standard webcam (and even lock it off if desired), you can use it for conferences and presentations, or you can use it as a straight vlogging camera, allowing you to be more lively and keep your hand free of videography gear. If its 1080p resolution is not enough for you, there is also a 4K version.
Imagine a world where you can plug all of your HDMI devices into a single card. Well there are a few capture cards that can do that. Now imagine one where you can have unprecedented control over those sources thanks to some killer software. The Elgato Camlink Pro provides four inputs supporting 4K/30fps or 1080/60fps that can be introduced as individual sources into your streaming or video conferencing software of choice, or you can use the multiview controls to use a combination of the sources and send them out as one single video source. This opens you up to so many video editing and content creation possibilities that just didn’t seem possible before. 
AVerMedia has long been a reliable name in video capture devices. The Live Gamer Ultra is a fantastic capture card that passes through 4K/60fps or up to a 240Hz refresh rate on full HD and captures 4K/30fps and 1080/120fps. It’s also great looking and, if you are shopping soon, the Live Gamer Ultra is on sale for $169.99 on AVerMedia’s website.
The latest greatest update from Elgato’s capture cards, the Elgato HD60 X has capabilities that other comparable capture cards simply don’t have. The main among them is the ability to pass through much higher refresh rates, including 4K/60fps, 2160p/60fps, 1440p/120fps and 1080p/240fps. This is definitely the device for higher-end gamers.
The 32 button version of the Elgato Stream Deck is a game changer for stream controlling, device controlling and productivity. Having more real estate for the buttons you use most saves the need to navigate multiple menu buttons to find the command you want. I, personally, have a number of buttons on my main screen that brings up entire shows, including my stream, podcast or YouTube setup. Any Stream Deck is a great Stream Deck, but this one, which was the first to have the really good base for Elgato, stands atop them all, making it a perfect piece of tech for video editing and contest creation.
($2.99 USD/month or 12 months for $25)
Maybe you already have your best device and it has been in your pocket all along. You can download Stream Deck Mobile on iOS and Android, and it turns your phone into a 15 button stream deck, able to control anything a regular stream deck can (as long as your smartphone and computer are on the same network). To put the price into perspective, you can pay for this app for thirteen years to equal the price of the Stream Deck XL. At the very least, it is a great way to try out their UI.
Some may know this device as the Loupedeck Live, but Razer and Loupedeck have teamed up to rebrand the device and add a ton of new compatibility. The combination of touch screen and knobs give you a total of 26 buttons and 6 dials for all kinds of productivity. It’s a great stream controller and editing device. Its main reason for its honourable mention is that the Razer version has not been released yet. It is due to be released this fall, though. If you aren’t that patient, the Loupedeck Live is still for sale
Whether you are a Mac or PC person, you cannot deny that Macs are workhorses. The most recent M1 and M2 versions of their computers have taken their power to another level. Their Premiere software (Not Adobe Premiere. Don’t get me started), is Final Cut Pro. It is powerful and feature-packed and no other program has more plug-ins built specifically for it. The Price of $299 is cheaper than one would expect, especially given the fact that another big name in NLEs, Adobe Premiere, has a monthly cost to it that eclipses the price of FCP in less than a year.
(Free with a paid version available for $295 USD)
What’s more affordable than free, am I right? The biggest thing about DaVinci Resolve from Blackmagic Designs is that it doesn’t feel like free software. It offers a ton of editing features, one of the best colour correction tools going, a full audio editing suite all all kinds of great tools to make the most of your content. Edit HD video, make tik toks and take advantage of everything the free version has to offer. For the paid version, you add cloud-based collaboration, the ability to export in higher resolution, additional FX and so much more. Native compatibility with all Blackmagic Cameras is another big selling point if you use their gear.
Use one of the above options. It may sound snobby, but I swear I am looking out for your best interests.
A complete mixing studio in a single application, Apple Logic Pro’s reputation precedes it. This Digital Audio Workstation may be a little OP for basic projects. This thing can put together full film scores in Dolby Atmos. Music producers will love its endless amount of tools, loops, sounds and so much more that can allow you to compose something on the Mac in real time. 
Free + Simple = Ideal. That is your first lesson for this school year. The UI doesn’t look like anything fancy, but it doesn’t need to be. It  can record up to sixteen tracks at once from a single device. It has tons of effects and transitions and  it supports a great deal of plug-ins. It is a perfect option for beginners and, if you don’t do complicated audio work, you may never need to upgrade.
Another free option if you leave out the cost of a Mac. It comes pre-installed and has a lot of tools, some overlapping with Logic, including a library of free sounds. Its main disadvantage is that it’s Mac only, so not everyone can take advantage of the free software.
($9.99 USD/Month for Students, $12.99 USD/month for everyone else – Includes Adobe Lightroom)
Photoshop remains the GOAT for photo editing. It has been developed over years and evolved to near perfection and everyone makes plug-ins compatible with this application. Photoshopping is so recognizable as a brand, it has become its own verb like Googling or Xeroxing. You can edit 3D images and simply has more tools than any other program, period.
A fantastic alternative to Photoshop plus the advantage of a one-time price is very intriguing. It is the program that I use for all of my work, and you really don’t lose out on any major features. You can edit raw files and use the same layer-based workflow. The UI is also very familiar if you know Photoshop. It can even open and export .psd files (Photoshop cannot work with Affinity’s files). It may have less overall features, but you can go a long way with what you get, and the price is great.
This free software looks familiar when compared to the other editors and I would not put this into a category of you get what you pay for, but the limitations of Gmp are noticeable. For the more simple editing projects, however, it can do the job just fine. 
For those of you students out there who really do love Adobe or want to see what it is all about, you can get the complete Adobe Creative Cloud, including 27 programs including Photoshop, Premiere Pro, Audition, Illustrator, After Effects and more for $19.99/month for the first year (It’s $54.99 USD/month after that).
CGMagazine is a convergance of cutlure and media, looking at gaming, film, tabletop, and technology. With features, reviews, articles and news, CGM is here to keep you informed and in the know on everything new and exciting. 
CONTACT
MORE FROM CGM
© 2021 CGMagazine Publishing Inc. All Rights Reserved. CGMagazine may earn a portion of sales from products that are purchased through our site as part of our affiliate partnerships with retailers. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of CGMagazine.

source

Immersive Music: 8 Dolby Atmos Mixing and Mastering Insights – SonicScoop

Home » Tips & Tutorials » Immersive Music: 8 Dolby Atmos Mixing and Mastering Insights  
Where are you on your immersive music production learning curve?
Immersive music experts headlined at “Immersive Music Production” in NYC. L-R: Executive Director BerkleeNYC Stephen Webber, Ann Mincieil, Michael Romanowski, and George Massenburg (Photo Credit: Kallie Marie)
I had some interesting revelations when I attended a recent all-day event hosted by Mix Magazine at BerkleeNYC Powerstation. “Immersive Music Production” featured speakers and innovators in Dolby Atmos, spatial audio, and beyond, who all had thought provoking insights and advice.
I came to the event curious, but also mostly uninformed about Immersive Music Production, and like many thinking, “This is just going to be like 5.1, right?” While the jury is still out, and only time will tell, signs are pointing to:
No. This is not a drill, and this format may likely be here to stay. So what do you need to know?
Here are eight revelations on Immersive Music Production, in no particular order. This intel was gleaned during live interviews and audience Q&As with the event’s guest speakers, who included such experts as Ann Mincieli, Bob Clearmountain, Kevin Shirley, Darcy Proper, F. Reid Shippen, Rich Keller, George Massenburg, Michael Romanowski and many more.
There are many challenges and changes in terms of standardization of delivery formats. There are also challenges with parallel delivery and future compatibility. Dolby and Sony have a difficult relationship, and do not have compatible metadata, with Dolby not wanting to give up its SDK. There is a lot yet to be developed, while the technology continues to evolve.
 
There is no standard for the consumer – yet. As of now there is no standard set for delivery to consumers, both in hardware that they may access and enjoy immersive music on, but also the codecs that are applied. For example, the companies that make sound bars at present (Sony, Amazon, and Sennheiser) all have different standards for delivery, and communicating or standardizing this between companies.  Better educating consumers about this new format, both in terms of what to expect, how to best enjoy the format, and how more changes may come,   is a critical point, and a bridge is needed. It also needs to be affordable to the consumer, with real PCM audio being distributed to end users.
Apple is driving much of the technology, and innovation – potentially a key indicator that this format will stick. However, Apple changes the current immersive format often, without warning. Presently, Apple has three billion installed users, and is driving the market. Since Apple is very much pushing with augmented reality, so music must keep up on that front too. Apple applies their own 7.1.4 render, and their spatial delivery is in their AirPod headphones — not the iOS device! That means that a firmware update could change the mix, making Apple a moving target. Tidal and Amazon are in there too, and Google is soon to follow with YouTube.
 
Many record labels are pushing for revisionist immersive mixes to be created and released. Some labels are saying that they want stereo and immersive to sound the same, but they are often not bringing in the original producer, mixer, or artist.
Some artists, like Alicia Keys, have been integral to really exploring the immersive format, and having the artist in early to weigh in on these immersive mixes can help make sure that the integrity of the song or album remains intact. As a result, many artists have become distrustful of the immersive conversions of their recordings, because they themselves, nor their original production teams are being included in the transformation of their catalogs. It has been hard to get all artists on board because of this.
For some artists this also feels hard because they must redo something they already worked so hard to complete. From the label’s perspective they are less concerned and are more interested in selling more copies. If you are a producer, it is very important to talk to your artists early about doing both types of mixes so they know if they are doing both – this can really help the artist be present for the process, and plan ahead for future versions. Many labels are rushing to get updated mixes, but the songs might not come out sounding very good. As the technology evolves these mixes will get replaced.
 
Immersive means a different way to think about the mix. (Photo credit: Kallie Marie)
Ann Mincieli (Alicia Keys, Jungle City Studios) has been integral in establishing the protocols for this format, creating templates and often rendering plugins in place [or freezing] to help resolve format issues. She had started with stereo mixes as guides, but in many cases really had to start from scratch.
Mincieli described how she separates stems when she mixes to help with future mixes, creating pre-mix stems, noting that consistent deliverables for pre-mix prep are important. This would often include Inst, Acapella, mixes as template guidelines. She said that one must re-imagine the mixes, and there’s no true way to be exactly the same.
 
When planning immersive music production, a key perspective to hold in mind is from elite mastering engineer Michael Romanowski, that any “movement should be supporting the song, like it does in stereo. It shouldn’t be movement for movement’s sake.”
In addition, Romanowski explained that mixers should look out for, “When you listen to a song, and you can hear if a part can work in space and tell a story.”
 
Audio engineers and artists went into the Atmos unknown at Power Station at BerkleeNYC. (photo credit: Kallie Marie)
From a recording perspective, the producer and the engineer also have some exploring to do. That’s because right now immersive recording is largely an unknown and presents unique challenges.
For a start, it’s difficult to incorporate experimental practices on a session with an artist. It is too hard to record quickly, and there are currently few immersive microphones on the market. While there are some placements and ambient room miking techniques, these are still in developmental stages.
Additionally, the session and artist can’t be held up to try to stop and experiment, and certain experimental practices could make it harder to punch in. Currently a lot of the available microphones are the market are mostly academic ambisonics. Bob Clearmountain (David Bowie, Rolling Stones) noted that “stereo ambient mics are very important”, and that “Decca tree can be your friend!”
 
Mixes should be thought of in terms of Object-based and Channel Bed-based. In short, objects are elements that are moveable, while beds are non-moveable. Additionally, objects can be panned in 7.1.4 while beds are typically 7.1.2. Thinking about mixes in this way changes the workflow for music and its many genres. Whereas these formats were designed with film in mind, elements that are being dealt with in musics’ post, i.e. mixing and mastering, is still a huge creative component, and is not just about technical deliverables.
Listening is still, and always key. Many mixers who were speaking at “Immersive Music Production” advised the audience to keep a separate LFE (low frequency effects) bed. Objects tend to sound better than beds, according to several people speaking that day, including F.Reid Shippen (Kenny Chesney, Ingrid Michaelson). He also mentioned that labels don’t want too many object-based sessions, because it makes the files huge, so be mindful here. It is all about striking a balance, until Pro Tools has an object bed.
For now Shippen recommends thinking of beds as mainly for effects, keeping objects for parts as much as possible. He also noted that LFE in music should be the center channel, and that nothing below 40 Hz should be in, as it just makes “mud in music.”
He noted that loudness is also dealt with differently in immersive music, and to keep it just under -18 LUFS (loudness unit full scale), adding that it “sounds really good, until it really doesn’t,” making mastering so important to immersive music, as loudness is both experienced and perceived differently. He also warned that phase is a common issue in immersive music, noting that anything too wide will cause phase issues. Make mono choices carefully to avoid phase, and place a single point source in spatial.
 
Barriers for entry into immersive music production are changing. Focusrite have helped with one of their interfaces, making it more accessible, costing much less than an Avid interface. The Focusrite 18i20 audio interface, for example, is retailing for approximately $549 new. Having a workflow like this can help with monitoring that is capable of 7.1.2.
Another approach to wading into immersive music production would be to do some work in binaural headphones, but you must check your mixes in a properly set up immersive speaker system and room. In other considerations for entering the immersive music production world, Audioshake are said to be developing some key cloud-based processing, but so far nothing is released yet. Word on the street says: keep an eye on them.
Please note: When you buy products through links on this page, we may earn an affiliate commission.
| SWEETWATER | THOMANN | AMAZON | REVERB |




© Copyright SonicScoop 2022

source

Hotboxx Presents His Latest Collaborative EP ‘Vogue’ Featuring The Artist Never Die & London X – EDMTunes

Hotboxx, The Artist Never Die and London X join forces to release a powerful new EP ‘Vogue’. This new production has the flavors, colors and sounds of the nostalgic 90’s as it undoubtedly showcases the style of these trio of artists. The release is made via the label and collective House of Huemans, of which the three DJs and music producers are lead members. 
With nostalgia activated, the power and energy of this release is evident in every song of this 3-track EP, that will surely put the name of the artists higher on the list of acts to follow. 
Coming from recent collaborations with the same label, Hotboxx brings his eclectic and impressive style to the mix, making ‘Vogue’ a perfect new addition to the playlists of party-lovers and voguers out there. 
The track, ‘Too Sexy’, features a pounding beat, a wobbly bass, and playful autotune vocals, with a chopped sample of the classic hit ’Too Sexy’ by Right Said Fred; smaller percussion that give off even more Miami vibes. This track will get the party started. 
Then, ‘Keep Movin’ that introduces an energetic beat, a nostalgic synth, chopped vocals sampling ‘Keep Moving’ add dynamic to the track. 
Another track featured in this epic EP is titled, ‘So Horny’ starts with a throbbing 4 to-the-floor beat, powerful bassline and layers of smaller percussive elements that add dynamic to the beat, playful sonic elements, samples and vocal chops give the track its signature flavor.  
‘Vogue’ is a nostalgic yet refreshing journey filled with stunning sounds and wrapped with the high-level and quality delivered by the collaboration between Hotboxx, The Artist Never Die and London X, three artists that keep proving themselves to be leaders of a fresh wave of sound taking over the Dance music world: make sure to follow them as they continue to put out remarkable productions that hit the charts worldwide. 
‘Vogue’ is out now and available in all major online stores and streaming platforms. 
Listen and buy ‘Vogue’ now 
https://open.spotify.com/album/2SQFZlAQxocVQO4xEyUl4Y
Hotboxx Online 
Soundcloud | Instagram | Beatport 
The Artist Never Die Online 
Beatport | Soundcloud | Spotify 
London X Online 
Spotify | Beatport 
House of Huemans Online 
Soundcloud | Instagram 

source

Vinyl production platform aims to treat listeners to master-quality records – New Atlas

Though dedicated music streamers might not have even noticed, sales of vinyl records have been on the rise over the last few years, prompting pressing plants to fire up again and start churning out albums. Currently in stealth mode, the UK’s elasticStage is looking to shake up vinyl record production with a new manufacturing and distribution model.
Manufacturing a vinyl record can be quite an energy intensive process where metal templates – kind of like negatives of each side of the master record – stamp the grooves into heated PVC, then the pressed album is allowed to cool before being packaged and sent off to a record store for sale.
The elasticStage process – which has been in development for the last six years – reportedly cuts out the pressing process altogether and effectively produces lots of first-generation master records on a PVC alternative, which should result in higher quality playback when they reach the turntables of vinyl-loving listeners.
“The sound of the vinyl is a significant upgrade from the established 50-year-old manufacturing process,” said renowned music producer – and investor in elasticStage, Paul Epworth. “There is sharper definition in all frequency ranges without losing any of the vinyl character. Largely indistinguishable from the original master in blind tests, on a sonic level it brings the vinyl process into the 21st century, which is why I have invested in elasticStage as it represents an overhaul to the way vinyl will now be created.”
The company claims that its manufacturing method should result in less waste, a reduction in energy use compared to vinyl pressing processes and “the issue of unsold stock in bargain bins and warehouses also becomes a thing of the past” as the fully packaged records and artwork can be sent direct immediately to the customer from the point of creation.
Another advantage of the development is much shorter lead times, with minimum orders of just one record if required – artists are able to “essentially sell vinyl on the same day when making a release available on the elasticStage web-platform.”
The actual patent-pending production process hasn’t been revealed at this stage, but the on-demand, direct-to-customer manufacturer has attracted investment from leading industry figures including Epworth (producer: Adele, Paul McCartney), Dan Grech-Marguerat (producer, mixer, engineer: Lana Del Rey, George Ezra, Tom Grennan), Ryan Walter (Lewis Capaldi’s manager), Tim Parry (co-founder of Big Life Management) and Ed Millet (co-founder of TaP Music). The latest seed round has taken the total raised so far to £3.5 million (over US$4 million).
“We have built a revolutionary way to manufacture vinyl that will soon replace the current outdated, traditional method that uses harmful chemicals and a lot of energy, along with long lead times and unnecessary warehousing,” said elasticStage CEO and co-founder, Steve Rhodes. “We are already in talks with a major DSP for integrating our tech and we can’t wait to help the industry in meeting commercial demand for vinyl at speed.
“At the same time, rightsholders can considerably increase the number of catalogue titles available, which will help boost revenue. We have truly modernized the vinyl manufacturing process and are also perfectly situated for the growing number of creators, estimated to reach 50 million by 2025, that currently have no or little access to vinyl.”
At this time, elasticStage has yet to officially launch, and its website is currently little more than a holding page. We look forward to learning more about the technology behind this exciting initiative, and to trying out our first album.
Source: elasticStage

source

Cooler Master GM32-FQ QHD 165 Hz Gaming Monitor Review – Tom's Hardware

Tom’s Hardware is supported by its audience. When you purchase through links on our site, we may earn an affiliate commission. Here’s why you can trust us.
By published
The Cooler Master GM32-FQ is one of the most color-accurate gaming monitors I’ve seen. It also has super-low input lag for quick and precise gaming. It doesn’t offer any extra contrast for HDR content, but it does deliver an excellent gaming experience for the money.
Best in class color accuracy
Large color gamut
Above average contrast among IPS panels
Low input lag
Premium styling and build quality
Excellent value
Weak overdrive
No additional contrast for HDR content
When shopping for a gaming monitor based on specs, it’s easy to assume that products from the same maker, in the same line, with the same specs that differ only in screen size will perform the same. But I’ve reviewed several products from our best gaming monitor roster that share a lot of DNA that are not just smaller or larger versions of one another.
Case in point: two new monitors from Cooler Master. I recently reviewed the GM27-FQS and found it offered solid gaming performance and accurate color. I received its larger cousin, the GM32-FQ, at the same time, and though the two screens look the same and have mostly the same specs, they are different in more ways than just size.
The GM32-FQ features an IPS panel with QHD resolution, 165 Hz, Adaptive-Sync, HDR and extended color. It differs from the GM27-FQS in a few ways that can only be discovered by testing and hands-on gameplay.

The GM32-FQ features a relatively new variant of IPS technology – Advanced Dimension Switch or ADS. It’s the same as Samsung’s PLS (Plane-Line Switching) in that the liquid crystals are laid along the same plane to admit more of the backlight’s output through to the TFT layer. In theory, this should provide greater brightness and better contrast. In practice, the GM32-FQ has a higher output than the GM27-FQS and is therefore certified VESA DisplayHDR 400, a figure I verified in testing. It also has higher contrast though not by much. I measured close to 1,200:1 versus the 27’s 950:1, a nice gain that can be seen with the naked eye.
Other image-related specs are the same. I measured the same 92% coverage of DCI-P3 and similar levels of color accuracy. But the GM32-FQ requires exactly zero adjustments to provide reference-level color, grayscale and gamma tracking, whereas the 27 needs a slight tweak.
Gaming performance has the same degree of promise. Both screens run at 165 Hz without overclock and include Adaptive-Sync and blur reduction via backlight strobe. The GM32-FQ has not been certified by Nvidia, but it runs G-Sync with no problems.
Perhaps the most compelling thing is pricing; the GM32-FQ is only around $70 more than the GM27-FQS at this writing. So, you can get the same game performance, a little more contrast, a larger screen, and the same cool thin-panel styling with a metal backplate and quality stand for an extra seventy bucks. That’s a win by any definition.
The GM32-FQ’s carton is just a larger version of the GM27-FQS’s, slim and efficient. The three parts come out of their crumbly foam and will require the included Phillips-head screwdriver for assembly. Once complete, the package is solid and secure. In addition to an external power brick, you get HDMI and DisplayPort cables plus a little clip to keep wiring tidy.
Cooler Master created a nice minimalist look for the GM32-FQ that is visually identical to the GM27-FQS. One advantage of the ADS/IPS screen is that it’s a bit more rigid. This allows for the thin upper panel portion, which is just seven millimeters deep. Components are packed into a bulge in the lower half that is 18 millimeters, still much thinner than the average 32-inch or 27-inch monitor. The bolt pattern is 100 mm VESA, so you can use an arm if you wish.
The stand is all metal and finished in gray satin that exudes quality. Corners and edges are nicely softened while maintaining the dramatic angles necessary for contemporary styling. The height adjustment is 110 mm (4.3 inches) with a 15 degree swivel and 5/20 degree tilt. There is no portrait mode. Movements are smooth and firm with no play.
The GM32-FQ eschews any sort of LED lighting feature. You’ll remember that the GM27-FQS has lights in its base for a neat ring effect, but the 32-inch display is all business. The screen has the same near-invisible bezel of 7 mm with an 18 mm strip across the bottom adorned by a tiny Cooler Master Logo. The control keys are around the back right and again devoid of a joystick. Also in the back is a larger logo and a grill housing two speakers. The GM27-FQS was soundless, but the 32-inch delivers decent sound with clear highs and good volume.
Video inputs include two HDMI 2.0, one DisplayPort 1.2 and a USB-C port. Peripherals can be connected to two USB 3.0 downstream jacks, and there’s an upstream port for connecting to your PC.
I expected the GM32-FQ’s OSD to be the same as what I found in the GM27-FQS, but there are a few differences worth mentioning.
The GM32-FQ offers eight picture modes and includes an sRGB preset among its choices. Each mode has different settings, like Black Stabilization to brighten shadow areas and dynamic contrast for SDR content only. The sRGB mode provides that color gamut, but I found better accuracy when choosing BT709 in the Color Space sub-menu, under Color Adjust. I’ll talk about that in more detail later. The Game mode has another six presets, which change gamma to best suit different game types. The Response Time (overdrive) feature has four levels, but anything over the lowest creates visible ghosting.
In the Color Adjust menu, you’ll find the same color temps, 6-axis sliders and color space options as the GM27-FQS but no gamma presets. That’s OK, because the GM32-FQ has better gamma tracking than its smaller sibling. If you want the smaller gamut, choose BT709 rather than the sRGB picture mode, it’s much closer to spec. For the full extended gamut, stick with Auto; it provides professional-level color.
Video processing options reside in the Setup Menu, where you can toggle Adaptive-Sync or turn on the backlight strobe, which Cooler Master calls Motion Clearness. The strobe works well and only exacts around 30% of the light output at the highest of four settings. Though there is a Crosshair option in the menu, I could not find a way to activate it. It remained grayed out in all picture modes.
The GM32-FQ is one of the rare displays that comes calibrated to perfection out of the box. I didn’t have to do a thing to measure color, grayscale and gamma that rivaled the best professional screens. The native gamut covers 92% of DCI-P3 and if you want sRGB, set the Color Space option to BT709. In all cases, it’s best to leave the color temp on Native. There are no gamma presets, but tracking is nearly perfect if 2.2 is your preference.
HDR signals activate three additional picture modes, Movie, Game and Custom. The latter has RGB sliders as well as black and white level threshold controls. In all three HDR modes, you can adjust the backlight’s output, which very few HDR monitors allow.

I am partial to 32-inch monitors easy to put two documents up side by side when writing in Word and spreadsheets can be viewed with a minimum of scrolling. Web pages can also be seen with very little use of the mouse wheel. And I can keep a page up next to a document when I need to refer to information found online.
My only comment concerning the GM32-FQ is the same one I’d make about any 32-inch QHD monitor – pixel density. While 93ppi is enough to read small text clearly and render fine detail in graphics, it’s not Ultra HD, a resolution I’ve become accustomed to. Extended color helps with video and photo editing because the extra color saturation adds to the perception of sharpness. I use an sRGB monitor in my daily work, and it’s easy to see the Cooler Master’s extra punch and hue.
Gaming is another story. Motion resolution becomes the critical factor, and, in that metric, QHD at 165 Hz is equal to, if not superior to, Ultra HD at 144 Hz. The realistic frame rates I see from a GeForce RTX 3090 video card are 150-165 fps in QHD and 100-110 fps in Ultra HD. That’s more than enough to make a visual difference. QHD is still the best balance between resolution and speed.
The GM32-FQ has no problems with the input lag. I could perceive its quicker control response compared to an Ultra HD screen. My aim was more accurate, evidenced by higher frag rates in Doom Eternal’s Horde mode. I’m not a very skilled player, but some monitors are better suited to my abilities than others. The GM32-FQ helped me play better.
HDR was something of a mixed bag. The GM32-FQ has a better HDR image than the GM27-FQS, but you have to take an extra step to get there. The brightness control not only remains active in HDR mode, but it also inherits the same SDR setting. So, when I fire up Call of Duty WWII, I have to raise the brightness to maximum to get the full effect. There’s no more contrast there, but the picture pops more than it does when set to 200 nits peak. HDR color is excellent in every respect. Detail is well-rendered without any need to tweak the in-game HDR settings. Reds are particularly strong, but greens and blues shine too.
Video processing is mostly fine, but I noticed a bit of softness when moving the mouse quickly. This is thanks to a weak overdrive. I could only use it at the lowest setting; anything higher produced resolution-robbing ghosting. The low setting barely applies any compensation, so motion blur is visible. It wasn’t enough to detract from my personal gaming experience, but if you’re a more advanced player, I recommend you try it before you buy.
Current page: Features and Specifications
Christian Eberle is a Contributing Editor for Tom’s Hardware US. He’s a veteran reviewer of A/V equipment, specializing in monitors.
Get instant access to breaking news, in-depth reviews and helpful tips.
Thank you for signing up to Tom’s Hardware. You will receive a verification email shortly.
There was a problem. Please refresh the page and try again.
Tom’s Hardware is part of Future US Inc, an international media group and leading digital publisher. Visit our corporate site (opens in new tab).
© Future US, Inc. Full 7th Floor, 130 West 42nd Street, New York, NY 10036.

source

JDM PARTNERS REACQUIRES STAKE IN DOUGLAS RANCH MASTER PLANNED COMMUNITY FROM THE HOWARD HUGHES CORPORATION® – PR Newswire

Searching for your content…
In-Language News
Contact Us
888-776-0942
from 8 AM – 10 PM ET
News provided by
Aug 22, 2022, 07:18 ET
Share this article
PHOENIX, Aug. 22, 2022 /PRNewswire/ — The Howard Hughes Corporation® (NYSE: HHC) announced today that JDM Partners has exercised their remaining option to reacquire a stake in Douglas Ranch, the recently launched large-scale master planned community in Phoenix’s West Valley. The community was acquired by The Howard Hughes Corporation from JDM Partners and El Dorado Holdings last October for approximately $541 million. On August 18, JDM Partners exercised its second option to buy back into Douglas Ranch, acquiring an additional 2.8% interest in the Douglas Ranch joint venture for approximately $15 million.
The transaction brings the aggregate of JDM Partners’ investment in Douglas Ranch—excluding Trillium, the community’s first 3,000-acre village—to approximately $65 million, which equates to approximately 12% of the joint venture. JDM Partners and El Dorado Holdings are 50/50 joint venture partners with HHC on Trillium.
Land sales at the master planned community are expected to begin this fall.
About The Howard Hughes Corporation®
The Howard Hughes Corporation owns, manages, and develops commercial, residential, and mixed-use real estate throughout the U.S. Its award-winning assets include the country’s preeminent portfolio of master planned communities, as well as operating properties and development opportunities including: the Seaport in New York City; Downtown Columbia®, Maryland; The Woodlands®, The Woodlands Hills®, and Bridgeland® in the Greater Houston, Texas area; Summerlin®, Las Vegas; Ward Village® in Honolulu, Hawaiʻi; and Douglas Ranch in Phoenix, Arizona. The Howard Hughes Corporation’s portfolio is strategically positioned to meet and accelerate development based on market demand, resulting in one of the strongest real estate platforms in the country. Dedicated to innovative placemaking, the company is recognized for its ongoing commitment to design excellence and to the cultural life of its communities. The Howard Hughes Corporation is traded on the New York Stock Exchange as HHC. For additional information, visit www.howardhughes.com.
Media Contact
The Howard Hughes Corporation
Cristina Carlson, 646-822-6910
Senior Vice President, Head of Corporate Communications
[email protected]
Investor Relations Contact
The Howard Hughes Corporation
Eric Holcomb, 281-475-2144
Senior Vice President, Investor Relations
[email protected]
SOURCE The Howard Hughes Corporation
Cision Distribution 888-776-0942
from 8 AM – 9 PM ET

source

3rd Power Introduces the Love Drive – Premier Guitar

A new drive pedal made in collaboration with the Christy Lynn Mitchell Foundation, a provider of merit scholarships for college-bound high school seniors.
3rd Power and the Christy Lynn Mitchell Foundation team up to introduce the Love Drive Pedal, a hand-built, clean-boost/preamp/drive pedal designed to create, optimize and refine your guitar signal with immersive wave-shaping 3 band EQ. The original Roosevelt Drive was inspired by the venerable Ibanez Mostortion pedal, a soft-clipping overdrive pedal that became incredibly popular with players everywhere. The goal then was to remedy the negatives; original units were expensive, hard to find, and costly to re-house in order to sturdy them up for road use.
The true-bypass, buffered input, and output (when active) allow you to place the Love Drive at the beginning, middle, or end of your chain. When active, the input buffer ensures your signal will enter the FET circuitry under optimal conditions. This ensures that the two gain stages and 3-band EQ will sound their absolute best. The output buffer means the LOVE DRIVE will drive longer cable runs while keeping your tone intact. When cascading with other dirt pedals, the dual buffer stages of the LOVE DRIVE will ensure that your tone soars without collapsing into itself due to mismatches in circuitry.
Street prices for the LOVE DRIVE will be around $279 and are available now in limited edition matte black, and gloss white heart graphic enclosures.
5% profit from LOVE DRIVE sales go to Christy Lynn Mitchell Foundation providing merit scholarships for college-bound high school seniors who exhibit the intrinsic motivation to be kind and compassionate. For more information, please visit 3rdPower.com.

Now iPhone and the previously released Rig Manager iPad offer wireless control of the PROFILER Stage, PROFILER Head, and PROFILER Rack. This adds another dimension of parameter editing and fine-tuning of your guitar tone at home, in the studio, at rehearsal, and on stage.
You can add, swap and modify effects using the intuitive graphical user interface. You only need one hand to optimize your PROFILER performance while the other one is holding that power chord. It has never been easier to get the best tones out of the PROFILER.
For more information, please visit kemper-amps.com.
The Foo Fighters’ frontman once took my Les Paul at a Halloween gig and played it onstage, with glee, for 90 minutes. But his new autobiography is full of better stories and plenty of wisdom.


“Life is just too damn short to let someone else’s opinion steer the wheel.”
—Dave Grohl, The Storyteller
In 2013, I was playing a Halloween party at Paul Allen’s Beverly Hills home/studio. It was a surreal gig, playing “Season of the Witch” with Donovan while supermodels, musicians, titans of industry, and celebrities like Sacha Baron Cohen, Dan Aykroyd, and Gina Gershon weaved around the packed yet spacious and spooky dance floor. Right in front of me, dressed like an Amish farmer, was Dave Grohl bobbing his head to the music. I held out my guitar to him and shouted, “DO YOU WANT TO PLAY?” He shrugged his shoulders like, “why not,” jumped onstage, took my Les Paul, and proceeded to play for 90 minutes, pretty much nailing every cover song requested by the crowd.
It was an impromptu jam at a party, but Grohl turned it into an epic performance, putting everything into every song, hitting the high notes by screaming like his life depended on it while beating my guitar like it owed him money. I remember thinking, “Man, no wonder this guy is a two-time Rock and Roll Hall of Famer. He gets it.”
I hadn’t thought about that for years until last week, when Dave Grohl told me his life story over the course of 10.5 hours as he read the audio version of his autobiography, The Storyteller.
If you’re a musician, you know people like the young, pre-Nirvana Grohl: the seemingly misguided who dropped out of high school to tour with a bunch of grown men in a dodgy van, sleep in abandoned squats, and survive on a diet of gas station corn dogs, generic cigarettes, and whatever else a $7 per diem can get you. Most professional musicians go through a similar rite of passage when they first forsake all common sense, security, and comfort to play music full time. Check back with those friends 10 to 30 years later and you’ll hear a lot of stories—some sad, some triumphant, but few more inspiring than Grohl’s. Consider these differences between Grohl’s experience and other sadder versions of parallel musicians’ lives.
Before he had drums, Grohl learned to play by hitting pillows in his small childhood home and making drumbeats with his mouth when no kit or pillows were available. He played and listened all the time, learning every song by his favorite bands. So, when Scream auditioned drummers, he already knew the entire catalog, proving that success is when preparedness and opportunity intersect.
Like many young drummers, Grohl was shoehorning fills into every space, thinking he was killing it. One day, Scream bassist Skeeter Thompson forced Grohl to get very high and play one simple groove without any fills for 30 minutes. Grohl described it as “breaking a wild pony.” I know a lot of young drummers who could not or would not do this. Consequently, they never get to the next level.
When Nirvana saw this skinny kid playing the shit out of his drums for the tiny crowd at a Scream show, they knew he was the guy. I see guys onstage checking their texts between songs or looking bored. If you’re going to play, be in it. Every gig is not just a performance. It’s an audition for the next gig.
Grohl said, “It’s hard to put into words the belief I have in music. To me, it is God. A divine mystery in whose power I will forever hold an unconditional trust.” We’ve all met wild-eyed Law of Attraction zealots who look at the universe as a divine vending machine, where you say the magic words, believe with all your might, and then get the shining prize you crave. It’s not about the prize; it’s about the journey: the rejection, embarrassment, discomfort, and lessons you learn along the way. The reward is that you become the person you’re supposed to be. I suspect the trick to manifesting your destiny is to move forward trusting that what’s happening to you is happening for you. Big dreams remain an empty distraction from real life unless you put in the work, sacrifice, and hustle to make it happen.
Honestly, if, like Grohl, you steadfastly work, keep your mind/soul open, say yes, be grateful, and put your whole heart into it, eventually, amazing things will happen to you. It will be a wild ride full of soul-crushing and soul-expanding experiences that will lead you where you’re supposed to be. That may be rich and famous or poor and anonymous, but if you can find happiness in one, you will have it in the other as well.
Parametric EQ power makes an impressive overdrive extra flexible.
Powerful but simple parametric EQ creates huge range of drive sounds. High headroom. Intuitive
Some players might like a little more control of high-mids.
$179
Catalinbread Tribute
catalinbread.com
Catalinbread’s Tribute is a potent overdrive and a very nice low-gain-to-cleanish boost as well. But the Tribute is also a powerful EQ device—one that can recast a flat or ill-fitting tone into an ideal or unexpected sound in a flash. And though the simple parametric EQ takes a bit of practice to master, it’s highly intuitive, fun, and easy to use by feel.
Tribute’s fundamental drive flavor is hard to characterize because the EQ creates so many variations on that voice. I replicated a few favorite Klon-style tones and more midrangey TS- and SD-1-style sounds with ease. But approximating these baselines only scratches the surface. The range of frequencies that you can boost and cut—1.4 kHz on the midrange side to 70 hz on the bottom end—is considerable. So is the +/- 12 dB boost or cut at your disposal once you’ve isolated the frequency you want to emphasize or remove. The way addition and subtraction of these frequencies adds focus, body, civility, mass, or aggression is impressive and often liberating.

The Tribute will be invaluable if you switch between humbuckers and single-coils in performance. It could be even more indispensable in the studio—not just for the subtle-to-nasty range of drive and boost tones you can access, but the ease and speed with which you can find them.
An all-gain parametric overdrive.
LATEST
LATEST
LATEST
LATEST
LATEST
LATEST

source

Technics SL-100C Premium Class Direct Drive Turntable Makes Its U.S. Debut, and It’s Already in High Demand – AnalogPlanet.com


The Technics SL-100C is now available in the U.S. exclusively via Technics and Amazon for $999.99. Initial stateside demand for this ’table was so high that Technics is already out of stock as I type this, but a company rep tells me directly they are “expecting to replenish soon.” That said, there is limited pre-order availability through Amazon, so if you’re interested, you know what to do.
 0815.apgearnews.technics.sl100coverhead.jpg
Here are the key features of the Premium Class SL-100C, which is said to have benefited from the earlier development of SL-1200 series models and the Reference Class flagship SL-1000R. The SL-100C has a coreless direct-drive brushless DC motor said to achieve “stable rotation free from cogging,“ an S-shaped aluminum tonearm, a two-layer platter, a high-rigidity cabinet and high-damping insulator for “smooth“ vinyl tracking, a pre-installed Audio-Technica AT-VM95C pickup cartridge that can be interchanged for potential upgrading, and an auto-lift tonearm.
Essentially, the SL-100C proffers a similar feature set as the aforementioned SL-1500C (which itself lists for $1,199.99, and instead comes with an Ortofon 2M Red phono cartridge) without the built-in preamp, plus it has a less expensive cartridge (the Audio-Technica AT-VM95C, which, as noted, can be swapped out), and only one color offering (black, with a silver tonearm).
 0815.apgearnews.technics.sl100cangled.jpg
Some of the SL-100C’s feature set differences may be deal-breakers for the more hardcore among us — as we do indeed have clear affinity for top-shelf Technics Reference Class turntable entries like the above-noted SL-1000R ($18,999.99) and SP-10R ($10,999.99) — but I’d venture it’s a better option than, say, something that combines the first and last syllables of the surnames of David Crosby and Bob Marley.
More SL-100C tech specs follow. Chime in below in the Comments section if you’d recommend this ’table to audiophile newbies, and/or if you’d consider obtaining one for yourself.
 0815.apgearnews.technics.sl100c.png

TECHNICS SL-100C
PREMIUM CLASS DIRECT DRIVE TURNTABLE

($999.99)

General Specs
Overall contents: turntable, turntable sheet, dust cover, EP record adaptor, balance weight, headshell, cartridge (Audio-Technica AT-VM95C), PHONO cable, PHONO earth lead, AC power supply cord, owner’s manual
Power Supply: AC 110-240V, 50Hz / 60Hz
Power Consumption: 8W, approx. 0.2W (standby)
Dimensions (w x h x d): main unit – 453 x 169 x 372mm
Weight: main unit – approx. 9.9kg (21.82 lbs)
Terminals: Audio Output – PHONO (Pin Jack) x 1 EARTH TERMINAL x 1
Tonearm Section
Type: universal static balance
Effective Length (from tonearm pivot to stylus): 230mm
Overhang: 15mm (19/32 in)
Tracking Error Angle: within 2° 32′ at outer groove of 12-in LP; within 0° 32′ at inner groove of 12-in LP
Offset Angle: 22°
Arm Height Adjustment Range: 0-6mm
Stylus Pressure Adjustment Range: 0-4g (direct reading)
Headshell Weight: approx. 7.6g
Applicable Cartridge Weight Range: 5.6-12.0g without auxiliary weight, and 14.3-20.7g including headshell; 10.0-16.4g with auxiliary weight, and 18.7-25.1g including headshell
Headshell Terminal Lug: 1.2mmφ 4-pin terminal lug
Turntable Section
Drive Method: direct drive
Motor: brushless DC motor
Turntable Speeds: 33 1/3, 45, 78rpm
Starting Torque: 0.18 N・m / 1.8 kg ・ cm
Build-up Characteristics: 0.7s, from standstill to 33 1/3rpm
Braking System: electronic brake
Wow and Flutter: 0.025% W.R.M.S.
Turntable Platter: aluminum diecast; diameter – 332mm; weight – approx. 2.0kg (including turntable sheet)

COMMENTS

Tom L's picture

is it available without the cartridge? I wouldn’t want to pay for the AT-VM95C and then immediately throw it in a drawer in favor of a better one.

Mike Mettler's picture

A good Q indeed, but the official Technics phraseology here is “pre-installed,” so I would say probably not, at least at this time. Hence, keep some drawer space open… for now.

mcrushing's picture

I haven’t met too many newbies looking at $1k turntables, but maybe I move in the wrong circles. That said, “Get a cosmetically deficient 1200mk2, a tune up, a 2m Blue and be set for life” is a recommendation I’ve given quite a few times.

And *THAT* said, people keep raving about these coreless/cogless motors and here’s a Plain Jane version in a $1k package and I’d… kinda like to hear it.

Pretty sure what’s in my profile photo will blow its doors off, but I’ve been “audiophiling” pretty hard about direct drive recently. Imagine if Technics did a poor-man’s SP10 in this price range. BYO plinth/arm/cart.

It won’t happen but it’s damn fun to think about.

rich d's picture

I don’t disagree with anything you wrote, but I should point out that Panasonics’s cost on that A-T cart is probably less than the price of a Big Mac in Tokyo, so its effect on the retail price of the schallplattenspieler should be minimal. The thing to do, then, is to keep the stylus guard in place, unscrew the headshell and store the whole business on a high shelf. Take your new turntable to Ye Olde Cartridge Vendor and have something better installed along with a new headshell. Enjoy this until your drunk friend Gary tweaks the stylus whilst scratching your mint Factory 12″ of Blue Monday. Pull out the A-T, screw it back in (remembering to adjust downforce) and party on.

And get a new friend, obviously. Gary’s an idiot.

Tom L's picture

that you chose to name my clumsy, drunk friend “Gary”. My actual friend Gary is a top-rank audiophile, far beyond my class, who would never do such a thing. If it did happen, I would put my old Stanton 681EEE in to party on.
BTW, a Big Mac costs about $5.74 in Tokyo, so the cart is probably a bit more expensive to A-T.

rich d's picture

I’m sure you’re right and if you know the price of a burger in Tokyo you’re probably aware of the Big Mac index employed by The Economist to judge the relative cost of living and effects of inflation in various countries. It’s a helpful and interesting tool. I, on the other hand, have never been accused of being helpful or interesting, though the word ‘tool’ has come up once or twice.

Re: the actual subject of this article, a grand looks pretty reasonable to me compared to some of the cosmetically lovely but technically (sorry) deficient products out there.

rich d's picture

And I’d be grateful if you’d have Gary read my post and report back on his comments. I still have some reservations about that dude.

Mike Mettler's picture

… you all know the rest of that song title — and now you’ve also got the tune/melody inside your head too. You’re welcome. 🙂

rich d's picture

I really don’t like Kansas. Not even the state.

garrard701's picture

Would I recommend? Depends…
Take what I say with a grain of salt, because I grew up lusting after 70s/80s Technics gear that my Dad had, or which I saw in catalogs. Around 1990 they seem to have lost their mojo and “gone Hollywood” (aka concentrating on home theater). By the end, the company was a joke — save for the 1200 and pianos.
Anyhow, the recent iterations of the SP-10 and SL-1200 are wonderful to my ears/eyes because I have always secretly loved direct drive, even when Corey Greenburg and John Atkinson were preaching PRaT and Linns and Regas in the vinyl dark ages of the 90s.
Pricewise, this new ‘table sits between my standard recommendations (for new), the Rega 2 and 3. The 100C is more than double what a tricked-out U-Turn would be. The SL-100C’s cart may be its soft point, but I see it as the equivalent of the 1960s’ come on, “buy a turntable and we’ll throw in a GE Variable Reluctance pickup for ONE PENNY!” Still, the A-T is decent but unspectacular; I use one on an older Technics DD as a backup table. If you’re paying $1000 for a turntable, you’re likely going to upgrade later or already have a war chest of carts to choose from. So who is this aimed at? I’m thinking people who have a 70s/80s Pioneer or Dual or something (SO SICK of seeing those on FB marketplace) and want to upgrade as they get serious and grow their collections. This is NOT the next step up for Crosley owners, for sure. I don’t even think Technics would aim for that lower-middle market segment… those buyers should graduate to a U-Turn (hopefully).
Comparing this and the other NEW Technics ‘tables to their vintage equivalents, the big difference is the brushless motor, right? Is it worth the money? At this price point, I say ‘yes.’ For $18k (as in the modern SL-1000)? I’m not sure. Vintage SP-10mkII units with all the trimmings go for $2-4k. And then you have a big financial cushion for recapping, etc., before hitting $18k.
On this SL-100C, I do miss the variable speed control of the 1200 (which this is visually based on). I also notice it’s the same price as the 1200mk7, which comes without a cart and has other differences — though you still get that brushless motor!
So, would I recommend? For some. There’s a LOT of contenders between a Crosley and a Rega 3… AT’s own turntables, the new Pioneer “DJ” units, U-Turn, the Rega 2, Music Hall, the 1200mk7, etc. as well as used turntables. But the SL-100C’s brushless motor is so alluring, I think I could recommend this for people who are willing and able to upgrade the cart, and don’t care about the functionality of the 1200mk7. BTW if this came in silver, that would be the icing on the cake!

latinaudio's picture

A lot of records reviews (thanks) and a couple of turntables news and manufacturers info. No equipment reviews, no accesories reviews (none of the turntables and the DS Audio 001 were reviews) after 2 full months of Fremer departure. What are you doing, boys? Tell us if you are not going to continue very very soon with what is the essence of this website.

Mike Mettler's picture

Product reviews are indeed on the way, and are in the works as I type this. They take time to be done professionally, and at the quality level we demand, and we have the right people on the job.

volvic's picture

We certainly like what we see so far. Now about this turntable. I heard the 1200GAE on 54th street a few months before it was launched. I loved it and should have bought it then, before they switched production to Malaysia. I love all things Japanese, nothing against Malaysia, maybe at some point I will get one. I would recommend this table to someone who wants a no fuss table for the next 5 years, till they decide if they want to stick with vinyl, if not they can flip it pretty quickly. Incidentally, I spoke to Bill Voss a year or two ago asking him to push Panasonic to come out with an armless 1200G. He said he’s already proposed it to them. The waiting game continues.

garrard701's picture

I have great respect for Fremer and love his work, but I also really appreciate the new direction here with MM/MS posting so many news items about albums to buy and new hardware. Instead of the checking the site a couple times a week, I now check daily. Nice to hear that some reviews will come soon, too.

Mike Mettler's picture

…and we appreciate the patience! While I cannot say exactly what’s in the product review pipeline as of yet, I can say there are at least three of them in the works that I’m currently monitoring, and we’ll post them as soon as they’re done and vetted — with many more to come, of course. And we’ll continue to regularly report on new products worthy of our, and your, attention.

We will also continue posting album reviews every Friday, many of them penned by our main man MS, and we will soon begin interspersing additional LP reviews throughout the week as our other name reviewers get up to speed. Me, I happen to have two key albums in hand and on my own ‘table that I’ll be reviewing in the coming weeks.

And, of course, the deep-dive interviews I’ve been doing will continue to appear mostly on Thursdays, with the next one of them slated for next week. And, whenever I come across new LP releases and/or box sets worthy of note, I’ll post about them too — in fact, see the latest one that just went up within the last hour. Stay tuned for more!

Jazz listener's picture

you should get lost.

Fremer has a new YT channel that reviews lots of gear, and his own new website not far behind it.

BruceN's picture

There are now two Technics turntables for $999, the SL-100C and the SL-1200Mk7. The new SL-100C has a simpler look and, yes, a throw-away cartridge. It also has auto-lift. I have the SL-1200Mk7, and I really like it. Unlike the SL-100C, it has a dial for setting VTA (SRA), which helped me a lot in fine-tuning my cartridge set-up.

I think the SL-100C obsoletes the SL-1500C, since that model has both a throw-away cartridge and a throw-away phono preamp.

Frankly, the choice between the SL-100C and the SL-1200Mk7 becomes a matter of taste (appearance) and features (auto-lift vs. easier VTA adjustment). Both are great turntables for $999.

Aside: I use a Jelco HS-25 headshell and a Herbie’s Way Excellent II platter mat on my SL-1200Mk7. The cartridge is a Nagaoka MP-200.

Russo7516's picture

Living in the NYC area you can get a used Sl-1200 from 100 to 700 depending on the shape it is in.
You can drop it off at Dj Fix and for few buck have it refurbished and it will play on for ever if taken care of. So why drop over a grand. A lot of the new collectors buy used gear
The DJ set prefers the older models also ez to repair parts are every where. DJ Henry or KAB has parts big time
Fremer use to poke fun at the Technics guys. He also knew they held speed well also and lasted.
I have an old Sl 1200 M3D , which has out lasted a Rega and has seen less service issues than my friends VPI DD turntable which he paid a premium for .
A few tweaks with a Technics and they can sound really good . Not as good as VPI direct drive or G/GR/ GAE SL-1200 .

is it available without the cartridge? I wouldn’t want to pay for the AT-VM95C and then immediately throw it in a drawer in favor of a better one.
I haven’t met too many newbies looking at $1k turntables, but maybe I move in the wrong circles. That said, “Get a cosmetically deficient 1200mk2, a tune up, a 2m Blue and be set for life” is a recommendation I’ve given quite a few times.
And *THAT* said, people keep raving about these coreless/cogless motors and here’s a Plain Jane version in a $1k package and I’d… kinda like to hear it.
Pretty sure what’s in my profile photo will blow its doors off, but I’ve been “audiophiling” pretty hard about direct drive recently. Imagine if Technics did a poor-man’s SP10 in this price range. BYO plinth/arm/cart.
It won’t happen but it’s damn fun to think about.
I don’t disagree with anything you wrote, but I should point out that Panasonics’s cost on that A-T cart is probably less than the price of a Big Mac in Tokyo, so its effect on the retail price of the schallplattenspieler should be minimal. The thing to do, then, is to keep the stylus guard in place, unscrew the headshell and store the whole business on a high shelf. Take your new turntable to Ye Olde Cartridge Vendor and have something better installed along with a new headshell. Enjoy this until your drunk friend Gary tweaks the stylus whilst scratching your mint Factory 12″ of Blue Monday. Pull out the A-T, screw it back in (remembering to adjust downforce) and party on.
And get a new friend, obviously. Gary’s an idiot.
that you chose to name my clumsy, drunk friend “Gary”. My actual friend Gary is a top-rank audiophile, far beyond my class, who would never do such a thing. If it did happen, I would put my old Stanton 681EEE in to party on.
BTW, a Big Mac costs about $5.74 in Tokyo, so the cart is probably a bit more expensive to A-T.
I’m sure you’re right and if you know the price of a burger in Tokyo you’re probably aware of the Big Mac index employed by The Economist to judge the relative cost of living and effects of inflation in various countries. It’s a helpful and interesting tool. I, on the other hand, have never been accused of being helpful or interesting, though the word ‘tool’ has come up once or twice.
Re: the actual subject of this article, a grand looks pretty reasonable to me compared to some of the cosmetically lovely but technically (sorry) deficient products out there.
And I’d be grateful if you’d have Gary read my post and report back on his comments. I still have some reservations about that dude.
I really don’t like Kansas. Not even the state.
Would I recommend? Depends…
Take what I say with a grain of salt, because I grew up lusting after 70s/80s Technics gear that my Dad had, or which I saw in catalogs. Around 1990 they seem to have lost their mojo and “gone Hollywood” (aka concentrating on home theater). By the end, the company was a joke — save for the 1200 and pianos.
Anyhow, the recent iterations of the SP-10 and SL-1200 are wonderful to my ears/eyes because I have always secretly loved direct drive, even when Corey Greenburg and John Atkinson were preaching PRaT and Linns and Regas in the vinyl dark ages of the 90s.
Pricewise, this new ‘table sits between my standard recommendations (for new), the Rega 2 and 3. The 100C is more than double what a tricked-out U-Turn would be. The SL-100C’s cart may be its soft point, but I see it as the equivalent of the 1960s’ come on, “buy a turntable and we’ll throw in a GE Variable Reluctance pickup for ONE PENNY!” Still, the A-T is decent but unspectacular; I use one on an older Technics DD as a backup table. If you’re paying $1000 for a turntable, you’re likely going to upgrade later or already have a war chest of carts to choose from. So who is this aimed at? I’m thinking people who have a 70s/80s Pioneer or Dual or something (SO SICK of seeing those on FB marketplace) and want to upgrade as they get serious and grow their collections. This is NOT the next step up for Crosley owners, for sure. I don’t even think Technics would aim for that lower-middle market segment… those buyers should graduate to a U-Turn (hopefully).
Comparing this and the other NEW Technics ‘tables to their vintage equivalents, the big difference is the brushless motor, right? Is it worth the money? At this price point, I say ‘yes.’ For $18k (as in the modern SL-1000)? I’m not sure. Vintage SP-10mkII units with all the trimmings go for $2-4k. And then you have a big financial cushion for recapping, etc., before hitting $18k.
On this SL-100C, I do miss the variable speed control of the 1200 (which this is visually based on). I also notice it’s the same price as the 1200mk7, which comes without a cart and has other differences — though you still get that brushless motor!
So, would I recommend? For some. There’s a LOT of contenders between a Crosley and a Rega 3… AT’s own turntables, the new Pioneer “DJ” units, U-Turn, the Rega 2, Music Hall, the 1200mk7, etc. as well as used turntables. But the SL-100C’s brushless motor is so alluring, I think I could recommend this for people who are willing and able to upgrade the cart, and don’t care about the functionality of the 1200mk7. BTW if this came in silver, that would be the icing on the cake!
A lot of records reviews (thanks) and a couple of turntables news and manufacturers info. No equipment reviews, no accesories reviews (none of the turntables and the DS Audio 001 were reviews) after 2 full months of Fremer departure. What are you doing, boys? Tell us if you are not going to continue very very soon with what is the essence of this website.
We certainly like what we see so far. Now about this turntable. I heard the 1200GAE on 54th street a few months before it was launched. I loved it and should have bought it then, before they switched production to Malaysia. I love all things Japanese, nothing against Malaysia, maybe at some point I will get one. I would recommend this table to someone who wants a no fuss table for the next 5 years, till they decide if they want to stick with vinyl, if not they can flip it pretty quickly. Incidentally, I spoke to Bill Voss a year or two ago asking him to push Panasonic to come out with an armless 1200G. He said he’s already proposed it to them. The waiting game continues.
I have great respect for Fremer and love his work, but I also really appreciate the new direction here with MM/MS posting so many news items about albums to buy and new hardware. Instead of the checking the site a couple times a week, I now check daily. Nice to hear that some reviews will come soon, too.
We will also continue posting album reviews every Friday, many of them penned by our main man MS, and we will soon begin interspersing additional LP reviews throughout the week as our other name reviewers get up to speed. Me, I happen to have two key albums in hand and on my own ‘table that I’ll be reviewing in the coming weeks.
And, of course, the deep-dive interviews I’ve been doing will continue to appear mostly on Thursdays, with the next one of them slated for next week. And, whenever I come across new LP releases and/or box sets worthy of note, I’ll post about them too — in fact, see the latest one that just went up within the last hour. Stay tuned for more!
you should get lost.
Fremer has a new YT channel that reviews lots of gear, and his own new website not far behind it.
There are now two Technics turntables for $999, the SL-100C and the SL-1200Mk7. The new SL-100C has a simpler look and, yes, a throw-away cartridge. It also has auto-lift. I have the SL-1200Mk7, and I really like it. Unlike the SL-100C, it has a dial for setting VTA (SRA), which helped me a lot in fine-tuning my cartridge set-up.
I think the SL-100C obsoletes the SL-1500C, since that model has both a throw-away cartridge and a throw-away phono preamp.
Frankly, the choice between the SL-100C and the SL-1200Mk7 becomes a matter of taste (appearance) and features (auto-lift vs. easier VTA adjustment). Both are great turntables for $999.
Aside: I use a Jelco HS-25 headshell and a Herbie’s Way Excellent II platter mat on my SL-1200Mk7. The cartridge is a Nagaoka MP-200.
Living in the NYC area you can get a used Sl-1200 from 100 to 700 depending on the shape it is in.
You can drop it off at Dj Fix and for few buck have it refurbished and it will play on for ever if taken care of. So why drop over a grand. A lot of the new collectors buy used gear
The DJ set prefers the older models also ez to repair parts are every where. DJ Henry or KAB has parts big time
Fremer use to poke fun at the Technics guys. He also knew they held speed well also and lasted.
I have an old Sl 1200 M3D , which has out lasted a Rega and has seen less service issues than my friends VPI DD turntable which he paid a premium for .
A few tweaks with a Technics and they can sound really good . Not as good as VPI direct drive or G/GR/ GAE SL-1200 .

source

CRAS and Spatial Launch 'Spatial Inside' Resources – Music Connection Magazine – Music Connection Magazine

CRAS (Conservatory of Recording Arts & Sciences) and Spatial, the award-winning immersive audio company and software service, announced the Spatial Inside program composed of educational resources and curriculum for audio engineers seeking to unlock the next frontier of immersive sound design. 
Spatial Studio 101 is the foundational curriculum that offers creators a course teaching the core principles of Spatial Studio, the real time editing environment for designing immersive sonic experiences. Unlike linear audio design software, Spatial Studio offers sound and experience designers the ability to sonically transform a space with sound objects that replicate real-world physics such as movement, relations, and reactions to cues inside a soundscape.
To deepen the pool of qualified immersive audio design talent, Spatial partnered with the Conservatory of Recording Arts & Sciences, (CRAS) one of the top-rated audio engineering and music production schools teaching hands-on skills and concepts for audio and sound design, to develop Spatial Studio 101. The partnership with CRAS enrolls audio engineers and creatives seeking to diversify their skillset and unlock commercial work opportunities with Spatial’s leading customers and clients. 
Spatial Inside will feature educational programs across the following curriculum areas:
For more information about Spatial or to register for Spatial Inside and Studio 101 visit: spatialinc.com/creators. 
Published since 1977, Music Connection magazine is a monthly music trade publication catering to musicians, industry pro’s, and support services. Music Connection exists to serve artists and music people, to offer connections to the unconnected and to provide exclusive information that can help our readers take their music to the next level.
Founded in 1977 on the principle of bridging the gap between “the street and the elite,” Music Connection has grown from a popular print publication into a spectrum of products and services that address the wants and needs of musicians, the music tech community and industry support services.
Metal Singer Leather Leone Signs with Steamhammer/SPV
Learn Beat-Making Tips from KRK Kreativity Bootcamp
Celestion Announces NFT Competition
Be Featured in the Recording Studios Issue of Music Connection
To Write Love on Her Arms Launches 11th Suicide Prevention Campaign

source

Project supports youth Master Naturalist program | Nebraska Today | University of Nebraska–Lincoln – Nebraska Today

· 3 min read
A University of Nebraska–Lincoln project to encourage youth to become naturalists has received a $71,630 grant from the Nebraska Environmental Trust.
The Nebraska Master Naturalist Program provides participants an opportunity to contribute to natural resource conservation through meaningful, science-based volunteer experiences. The program began in 2009 through a partnership that recognized Nebraska’s conservation agencies and organizations had limited resources. The program has hundreds of volunteers, or certified master naturalists, actively contributing to at-risk species conservation, restoration of native habitats, prevention of degradation of waterways and improved waste management.

Ferraro

“The Master Naturalist Program’s workforce is growing and evolving to meet the increasing requests for their service,” said Dennis Ferraro, professor of natural resources. “Goals of this proposal are to continue growth and establish a naturalist program for youth to enhance the future of conservation in Nebraska.”
The Nebraska Junior Master Naturalist Program provides youth ages 9-12 an understanding of Nebraska’s unique habitats, ecosystems, at-risk species and hydrology by engaging them in hands-on environmental education lessons. The program brings together natural resource specialists, master naturalists and educators to foster an environmentally focused community through natural resource curriculum, supplemental resources and partner resources to promote conservation action.
This is the second year of the award; last year, the program received $71,000 from NET.
The committee leading the youth program created a curriculum and resources in the first year. Materials were piloted and evaluated in three Omaha area schools. This fall, the program will expand with a full rollout, working with at least eight schools, three of which will be specifically focused on rural, urban and underserved communities.
“We are optimistic that this resource will be a great tool in impacting the future of conservation leaders in Nebraska,” said Matt Jones, program coordinator.
The junior curriculum is structured around the topics of zoology, botany, Earth science, water science, naturalists’ skills and volunteering. The lesson and activity guides will be available upon user request, as well as teacher tool kits that can be loaned out to teachers and educators to enhance the learning experience.
The project is one of eight Husker projects receiving support from NET this year.
The Nebraska Legislature created the NET in 1992. Using revenue from the Nebraska Lottery, the trust has provided more than $350 million in grants to more than 2,400 projects across the state. Anyone — citizens, organizations, communities, farmers and businesses — can apply for funding to protect habitat, improve water quality and establish recycling programs in Nebraska. The NET works to preserve, protect and restore the state’s natural resources for future generations.
Some parts of this site work best with JavaScript enabled.

source

[FREE] Fivio Foreign Type Beat – "Majestic"

Jacob Colon Drops New Flavorful Hit ‘Get Down’ – EDMTunes

Jacob Colon keeps delivering high-quality music in a steady and constant basis. This time, he introduces his latest production ‘Get Down’ via his own imprint Made to Move. The DJ and music producer virtuoso comes from reaching a long list of accolades and accomplishments lately; his weekly radio show not only continues to grow its fanbase at a fast pace but recently reached its 100th episode featuring the hottest mixes in the airwaves at the moment, he has continued to release impressive productions lately, having released the tracks ‘Open Gates’ and ‘Desire’ not too long ago; his release schedule as well as his time in the studio seems to be endless but with great results. 
Now, Jacob Colon unleashes this new banger that will definitely become an instant favorite; following previous releases and reaching new heights. 
‘Get Down’ features a House inspired energetic beat with conga accents that start off the track, an underlying powerful bassline holds the lower end of the song tightly and strongly. Playful vocal samples appear as little sparks every now and then, while intense risers meet a suggestive female voice that immediately triggers a potent drop that releases the party. Smaller and panned sonic elements fly around, adding more texture and complexity to this hard-hitting banger that displays Jacob Colon’s signature sound and vibe. 
Like previous releases, ‘Get Down’ is a clear example of a top-notch quality production, that not only showcases Jacob Colon’s style but also opens up a new door for his musical exploration and experimentation, as every track signals to a new chapter in Jacob Colon’s production journey filled with groove and good vibes. 
Don’t forget to follow Jacob Colon, as he continues to release instant hits in a constant basis, fulfilling his mission of putting his name higher on the list of best producers and acts in the Dance music world. 
‘Get Down’ is out now and available in all major online stores and streaming platforms. 
Listen and buy ‘Get Down’ Now 
https://ditto.fm/get-down-jacob-colon
Jacob Colon Online   
Soundcloud | Instagram | Twitter | Spotify 

source

Antibody “master key” discovery could neutralize all COVID variants – New Atlas

A new study published in Nature Communications has homed in on a part of the SARS-CoV-2 spike protein that seems to be shared across all known variants. The research also reveals an antibody fragment that can hypothetically block the virus from entering human cells, paving the way for future therapies to neutralize all COVID-19 variants.
The new research offers one of the most thorough investigations to date into the spike protein differences between a number of SARS-CoV-2 variants. Using cryo-electron microscopy the study zoomed in on spike proteins from Alpha, Beta, Gamma, Delta, Kappa, Epsilon, and Omicron (BA.1 and BA.2) variants.
The researchers discovered a certain part of the spike protein is conserved across all these variants. This spot, known as an epitope, is vulnerable to novel antibodies that could block the virus’ ability to infect human cells.
“The epitope we describe in this paper is mostly removed from the hot spots for mutations, which is why its capabilities are preserved across variants,” explained Sriram Subramaniam. “Now that we’ve described the structure of this site in detail, it unlocks a whole new realm of treatment possibilities.”
Antibodies work to block infection by fitting into those epitopes on the viral spike protein and interrupting the way the virus would lock onto human cells. The new research describes the development of an antibody fragment, dubbed VH Ab6, which can attach to that epitope found in all current SARS-CoV-2 variants.
“Antibodies attach to a virus in a very specific manner, like a key going into a lock. But when the virus mutates, the key no longer fits,” said Subramaniam. “We’ve been looking for master keys – antibodies that continue to neutralize the virus even after extensive mutations.”
At this stage the research is still speculative. The antibody fragment demonstrated in the study is more there to demonstrate how broadly effective targeting this particular part of the spike protein could be in neutralizing all known variants.
So far there has been little mutational movement in the part of spike protein highlighted in this study. The researchers suggest future therapeutics for COVID-19 should target this specific epitope in the hopes of developing antibody treatments that can neutralize all variants of the virus.
Validating these new findings is another recent study demonstrating an antibody candidate that, so far, in animal studies, can neutralize all current SARS-CoV-2 variants. That study, published in Science Immunology, comes from a team of researchers at Harvard Medical School and Boston Children’s Hospital.
After genetically modifying mice so they would produce human-like immune responses to SARS-CoV-2, the researchers exposed the animals to parts of the virus and chronicled nine different groupings of antibodies. One specific antibody, dubbed SP1-77, was found to be incredibly potent at blocking infection from all known SARS-CoV-2 variants. And no prizes for guessing what part of the spike protein this variant-proof antibody targets.
“We now have a very clear picture of this vulnerable spot on the virus,” said Subramaniam. “We know every interaction the spike protein makes with the antibody at this site. We can work backwards from this, using intelligent design, to develop a slew of antibody treatments. Having broadly effective, variant-resistant treatments would be a game changer in the ongoing fight against COVID-19.”
The new study was published in Nature Communications.
Source: University of British Columbia

source

JINJER, P.O.D., VENDED, MALEVOLENCE & SPACE OF VARIATIONS Announce U.S. Tour – Metal Injection

Hi, what are you looking for?





Happening through the end of the year.
By
Published
Jinjer, P.O.D., and Space Of Variations will hit the road together in late October with either Vended and Malevolence as support depending on which date you attend. The tour will also be Jinjer's first trek in the United States since Russian forces invaded their home country of Ukraine earlier this year. Get the dates below.

Advertisement. Scroll to continue reading.

w/ Vended
10/31 – San Diego, CA – House of Blues
11/01 – Sacramento, CA – Ace of Spades
11/03 – Denver, CO – The Fillmore
11/05 – Minneapolis, MN – The Fillmore
11/07 – Chicago, IL – House of Blues
11/09 – St. Louis, MO – The Pageant
11/10 – Grand Rapids, MI – 20 Monroe Live
11/11. – Detroit, MI – St. Andrews Hall
11/13 – Cleveland, OH – House of Blues
11/14 – Cincinnati, OH – Bogarts
11/15 – Louisville, KY – Mercury Ballroom
11/17 – Silver Springs, MD – The Fillmore
11/19 – Pittsburgh, PA – The Roxian
11/20 – Boston, MA – House of Blues
11/21 – New York, NY – Hammerstein Ballroom
11/23 – Philadelphia, PA – The Fillmore
w/ Malevolence
12/07 – Charlotte, NC – The Fillmore
12/08 – Greensboro, NC – Piedmont Hall
12/10 – Atlanta, GA – Tabernacle
12/11 – Nashville., TN – Marathon Music Works
12/13 – Tampa, FL – Jannus Landing
12/14 – Orlando, FL – House of Blues
12/16 – San Antonio, TX – Aztec Theatre
12/17 – Austin, TX – Emo's
12/18 – Dallas, TX – House of Blues
12/20 – Phoenix, AZ – Van Buren
12/21 – Las Vegas, NV – House of Blues
12/22 – Los Angeles, CA – Wiltern

Advertisement. Scroll to continue reading.

Jinjer originally canceled all their North American tour dates in March 2022 and instead focused their efforts on helping Ukraine through the sale of two t-shirt designs. The funds raised by the shirts have gone to various charities and humanitarian efforts aiding Ukrainians with food and medical supplies, as well as other basic necessities like water. Check both shirts out here.
Though the war didn't stop Jinjer from touring completely. The band embarked on a European tour sanctioned by the Ukrainian Ministry Of Culture this June, meaning they were given permission to leave the country as ambassadors of Ukraine to help raise both funds and awareness. As of today, Ukraine is still under siege by the Russian government, which began in late February.
Enter your e-mail below to get a daily update with all of our headlines.
 

And presumably about killing Jesus.
Anstis played with Cradle between 1995 and 1999.
“I think new music in 2024 would be really cool.”
The second member of Wintersun to join.
© Metal Injection. All Rights Reserved. Help Wanted | Advertising Info | Contact Us
Privacy Policy | How We Use Your Data | Do Not Sell My Personal Information | Your California Privacy Rights | Terms and Conditions

source

Mercedes-EQ AWD Urban Wonder Is an E-Bike With Massive Power and Flashy Looks – autoevolution

Mercedes-EQ AWD Urban Wonder Is an E-Bike With Massive Power and Flashy Looks  autoevolution
source

‹ Previous Next ›